| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 1P16027 | HYDRAULIC PULLER | 1 | |
| 2024913-14 | Hydraulic Puller | 1 | |
| 9C1546 | HYDRAULIC PULLER | 1 | |
| 9C1558 | HYDRAULIC PULLER | 1 | |
| 9C1559 | HYDRAULIC PULLER | 1 | |
| 9C1560 | HYDRAULIC PULLER | 1 | |
| CG274HY | HYDRAULIC PULLER | 1 | |
| CG400HYA | HYDRAULIC PULLER | 1 | |
| GBP205 | HYDRAULIC PULLER | 1 | |
| IAE1J12451 | HYDRAULIC PULLER | 1 | |
| IAE1M14149 | HYDRAULIC PULLER | 1 | |
| IAE1M14462 | HYDRAULIC PULLER | 1 | |
| IAE1P16219 | HYDRAULIC PULLER | 1 | |
| LB-20 | HYDRAULIC PULLER | 5 | |
| LB20 | HYDRAULIC PULLER | 5 | |
| LB−20 | HYDRAULIC PULLER | 5 | |
| MBHO-35-5.6 | HYDRAULIC PULLER | 1 | |
| WCI-1700-20Q | HYDRAULIC PULLER | 3 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) MBH0-35 | HYDROFF HYDRAULIC OFFSET - MBH0 PULLER (CALIBRATION) (CALIBRATION) | 1 | |
| 109-3130-04-1 | PULLER, T/R AND HYDRAULIC PUMP DRIVE QUILLS REMOVAL | 1 | |
| 11C3086 | PULLER - HYDRAULIC-STG 6-10 SPOOL/STG 5 DISK HP COMPR RTR | 1 | |
| 11C3086G01 | PULLER, HYDRAULIC - STAGE 6-10 SPOOL AND STAGE 5 DISK HPC ROTOR | 1 | |
| 11C3227 | HYDRAULIC PULLER - HPC ROTOR BLISK STAGE 1 | 1 | |
| 11C3227G01 | HYDRAULIC PULLER, HPC ROTOR BLISK STAGE 1 | 1 | |
| 21C10158G01 | PULLER,HYDRAULIC | 1 | |
| 21C2624G001 | PULLER,HYDRAULIC | 1 | |
| 21C532 | PULLER, HYDRAULIC | 1 | |
| 21C532G002 | PULLER,HYDRAULIC ASSY | 1 | |
| 21C7016G01 | PULLER HYDRAULIC | 1 | |
| 21C7024G01 | PULLER, HYDRAULIC | 1 | |
| 21C7024G02 | PULLER HYDRAULIC | 1 | |
| 21C7044G01 | PULLER HYDRAULIC ASSY | 1 | |
| 21C7046G01 | PULLER HYDRAULIC | 1 | |
| 21C7046G012 | PULLER HYDRAULIC | 1 | |
| 21C7046G02 | PULLER HYDRAULIC | 1 | |
| 289768-4 | HYDRAULIC FAN PULLER ASSY | 1 | |
| 293002-3 | FAN ASSEMBLY HYDRAULIC PULLER | 1 | |
| 2C14029G04TK | PULLER, LPT MODULE +Enerpac RC506 Hydraulic Cylinder | 1 | |
| 2C5191G02 | PULLER HPT ROTOR HYDRAULIC | 1 | |
| 2C91015G01 | PULLER, HPT ROTOR HYDRAULIC | 1 | |
| 2C91015G02 | PULLER, HPT ROTOR HYDRAULIC | 1 | |
| 6797060 | PUSHER & PULLER - HYDRAULIC | 1 | |
| 6799614 | PULLER - HYDRAULIC, GEARBOX PINION FRONT BEARING | 1 | |
| 6799643 | PULLER - HYDRAULIC, GEARBOX PINION REAR BEARING | 1 | |
| 7-662173080-601 | HYDRAULIC PULLER KIT | 1 | |
| 831381-1 | PULLER ASSEMBLY, HYDRAULIC TIGHT FITTING, AFT CURV | 1 | |
| 856A2374 | PULLER, HYDRAULIC - NO. 5 BEARING INNER RACE (PULLER) | 1 | |
| 856A2374G01 | PULLER, HYDRAULIC NO | 4 | |
| 856A2374G02 | Puller, Hydraulic - No. 5 Bearing Inner Race (puller) | 6 | |
| 856A2375 | PULLER, HYDRAULIC-REAR ROTATING AIR/OIL SEAL | 1 | |
| 856A2375G01 | PULLER, HYDRAULIC - REAR ROTATING AIR/OIL SEAL (PULLER) | 1 | |
| 856A2386G01 | PULLER, HYDRAULIC - LPT FORWARD ROTATING AIR SEAL (PULLER) | 1 | |
| 856A3058G02 | PULLER HYDRAULIC NO 5 BRG INNER RACE | 4 | |
| 856A3062 | PULLER, HYDRAULIC - REAR ROTATING AIR/OIL | 1 | |
| 856A3062 G02 | Puller Hydraulic ‐ Rear Rotating Air/Oil Sleeve | 6 | |
| 856A3062G01 | PULLER, HYDRAULIC - REAR ROTATING AIR/OIL SLEEVE (PULLER) | 1 | |
| 856A3062G02 | Puller, Hydraulic - Rear Rotating Air/Oil Sleeve (puller) | 6 | |
| 856A3062G03 | HYDRAULIC - REAR ROTATING AIR/OIL SLEEVE (PULLER) | 1 | |
| 856A3308G05 | HYDRAULIC PULLER INNER RACE | 8 | |
| 9C1546 | HYDRAULIC PULLER HPC CDP SEAL (CDP SEAL PULLER) | 1 | |
| 9C2152 | HYDRAULIC PULLER HPC SPOOL STG 2-5 DISK STG 6 | 1 | |
| 9C2152G02 | HYDRAULIC PULLER - HPC SPOOL STG 2/5 & DISK STG 6 | 1 | |
| 9C2153 | HYDRAULIC PULLER HPC DISK STG 6 SPOOL STG 7 - 9 | 1 | |
| 9C2243G01 | Hydraulic puller stage 6 | 1 | |
| 9C2244G01 | Hydraulic puller stage 2-5 | 1 | |
| 9C2245G01 | Hydraulic puller ube supporter ring | 1 | |
| 9C2257 | HYDRAULIC PULLER CONE SHAFT | 1 | |
| 9C2257G02 | HYDRAULIC PULLER - CONE SHAFT | 1 | |
| 9C2261 | HYDRAULIC PULLER HPC | 1 | |
| 9C2261G01 | HYDRAULIC PULLER - HPCR BLISK 1 | 1 | |
| 9G2261G01 | Hydraulic puller HPC Stg 1 | 1 | |
| BB-100 | Puller Unit - Air-actuated, hydraulic puller | 1 | |
| BB-30 | Puller Unit - Air-actuated, hydraulic puller | 2 | |
| BB-30A | Puller Unit - Air-actuated, hydraulic puller | 1 | |
| BB-70 | Puller Unit - Air-actuated, hydraulic puller | 1 | |
| BB-70A | Puller Unit - Air-actuated, hydraulic puller | 1 | |
| BB-RR | Puller Unit - Air-actuated, hydraulic puller | 1 | |
| BBHO-30 | BIG BRUTE HYDRAULIC OFFSET (BBHO) PULLER - TANG MANDREL ATTACHMENT OR, | 1 | |
| BBHO-30A | HYDRAULIC OFFSET PULLER UNIT | 1 | |
| BHP162 | 7 TON, HYDRAULIC CROSS BEARING PULLER SET WITH HAND PUMP | 1 | |
| BP7000 | AIR HYDRAULIC POWER UNIT RIVNUT PULLER | 5 | |
| CG1224 | PULLER,POWER:HYDRAULIC PUMP | 1 | |
| CG650 | PULLER,POWER:HYDRAULIC | 1 | |
| CG720 | PULLER,POWER:HYDRAULIC | 1 | |
| FT-20 | POWER UNIT, HYDRAULIC PULLER | 5 | |
| FTI-MBHO-2 | MEDIUM BRUTE HYDRAULIC OFFSET PULLER | 1 | |
| FTI-MBHO-20 | MEDIUM BRUTE HYDRAULIC OFFSET PULLER- | 1 | |
| G420-2S | PULLER,POWER:HYDRAULIC PUMP | 1 | |
| HYDRAULICPUMPPULLER | HYDRAULIC PUMP PULLER | 1 | |
| IAE 1J12220 | HYDRAULIC PUSHER/PULLER | 6 | |
| IAE1F10007 | PULLER, REMOVAL - ENGINE ASSY, ROTATING RING, STARTER / fuel & hydraulic pump SHAFT, GEARBOX | 12 | |
| IAE1F10035 | HYDRAULIC REMOVAL PULLER | 1 | |
| IAE1J12220 | Hydraulic Push-Puller | 6 | |
| IAE1J12220 | PULLER, HYDRAULIC-ENGINE ASSY, LP SHAFT | 6 | |
| IAE1J12270 | PUSHER / PULLER HYDRAULIC | 2 | |
| IAE1J12420 | PULLER, HYDRAULIC | 1 | |
| IAE1J12451 | PULLER, HYDRAULIC LHT Dwg No.(537220105) | 1 | |
| IAE1J12453 | PULLER, HYDRAULIC | 1 | |
| IAE1J12478 | PUSHER/PULLER, HYDRAULIC | 1 | |
| IAE1M14007 | PULLER/PUSHER, HYDRAULIC | 1 | |
| IAE1M14012 | PULLER/PUSHER, HYDRAULIC | 1 | |
| IAE1P16036 | PUSHER/PULLER HYDRAULIC, | 3 | |
| IAE1P16219 | PULLER, HYDRAULIC | 1 | |
| IAE1P17027 | PULLER, HYDRAULIC | 1 | |
| IAE1P17044 | PULLER, HYDRAULIC | 1 | |
| JB-30 | Puller Unit - Air-actuated, hydraulic puller | 1 | |
| JB-30A | Puller Unit - Air-actuated, hydraulic puller | 1 | |
| JB-60 | Puller Unit - Air-actuated, hydraulic puller | 1 | |
| JB-60A | Puller Unit - Air-actuated, hydraulic puller | 1 | |
| L-545739 | PULLER,HYDRAULIC LPT | 1 | |
| LB-10 | Puller Unit - Air-actuated, hydraulic puller | 1 | |
| LB-15 | Puller Unit - Air-actuated, hydraulic puller | 1 | |
| LB-20 | Puller Unit - Air-actuated, hydraulic puller | 5 | |
| LB-25 | Puller Unit - Air-actuated, hydraulic puller | 1 | |
| LB-30 | Puller Unit - Air-actuated, hydraulic puller | 1 | |
| LB-35 | Puller Unit - Air-actuated, hydraulic puller | 1 | |
| LTCT14818 | PULLER, HYDRAULIC 4TH | 1 | |
| LTCT14818-01 | Puller, Hydraulic, Fourth Turbine Wheel | 1 | |
| MB-30 | PULLER,HYDRAULIC | 5 | |
| MB-70 | Puller Unit - Air-actuated, hydraulic puller | 1 | |
| MBHO-2 | MEDIUM BRUTE HYDRAULIC OFFSET PULLER | 1 | |
| PWA 107824 | PULLER, HYDRAULIC (REPLACES PWA 85201) | 1 | |
| PWA 26288 | HYDRAULIC PULLER TOOL | 2 | |
| PWA 45520 | PUSHER PULLER.HYDRAULIC | 3 | |
| PWA 80607 | PUSHER/PULLER, HYDRAULIC | 1 | |
| PWA 85071 | PULLER, HYDRAULIC | 1 | |
| PWA101848 | PULLER HYDRAULIC LPT | 1 | |
| PWA101876 | PULLER HYDRAULIC LPT | 1 | |
| PWA111194 | PULLER HYDRAULIC | 1 | |
| PWA111195 | PULLER HYDRAULIC | 1 | |
| PWA111388 | PULLER HYDRAULIC | 1 | |
| PWA111490 | PULLER HYDRAULIC | 1 | |
| PWA111691 | PULLER HYDRAULIC | 1 | |
| PWA111722 | PULLER HYDRAULIC | 1 | |
| PWA211326 | PULLER HYDRAULIC | 1 | |
| PWA211430 | PULLER, HYDRAULIC - ENGINE ASSY, GEARBOX, PMA ROTOR | 4 | |
| PWA211434 | Puller, Hydraulic Engine Assy | 3 | |
| PWA211774 | "PULLER, MECHANICAL - HYDRAULIC PUMP SHAFT SEAL | 3 | |
| PWA25006 | PULLER-SEAL RETAINER GEARBOX HYDRAULIC DRIVES | 2 | |
| PWA33256 | PULLER, HYDRAULIC | 1 | |
| PWA45001 | PULLER, HYDRAULIC | 1 | |
| PWA45025 | PULLER, HYDRAULIC - #1 BRG. INNER RACE & SEAL SEAT | 1 | |
| PWA45025 REV E | PULLER, HYDRAULIC - #1 BRG. INNER RACE & SEAL SEAT | 1 | |
| PWA46270 | Puller, Hydraulic; #4 Bearing | 2 | |
| PWA50607 | PULLER, HYDRAULIC | 1 | |
| PWA52745 | PULLER, HYDRAULIC | 1 | |
| PWA53876 | PULLER, HYDRAULIC | 1 | |
| PWA53884 | PULLER,HYDRAULIC | 1 | |
| PWA56808 | PULLER,HYDRAULIC | 1 | |
| PWA57009 | PULLER HYDRAULIC | 1 | |
| PWA57037 | PULLER, HYDRAULIC | 1 | |
| PWA57306 | PULLER, HYDRAULIC | 1 | |
| PWA57812 | PULLER, HYDRAULIC | 1 | |
| PWA76253 | PULLER HYDRAULIC | 1 | |
| PWA78227 | PULLER HYDRAULIC | 1 | |
| PWA80330 | PUSHER/PULLER,HYDRAULIC | 1 | |
| PWA80330-14 | PULLER / PUSHER, HYDRAULIC | 1 | |
| PWA80387-2 | PULLER, HYDRAULIC | 1 | |
| PWA80434 | PULLER,HYDRAULIC | 1 | |
| PWA80526 | PULLER HYDRAULIC | 1 | |
| PWA80607 | PUSHER/PULLER,HYDRAULIC | 1 | |
| PWA85174 | PULLER HYDRAULIC HPC | 1 | |
| PWA85183 | PULLER HYDRAULIC HPC | 1 | |
| PWA85204 | Puller, Knocker - Engine Assy, Main Gearbox, RR Hydraulic Pump Drive Seal Retainer" | 4 | |
| PWA85225 | PUSHERPULLER HYDRAULIC | 1 | |
| PWA85227 | PUSHERPULLER HYDRAULIC | 1 | |
| PWA85251 | PULLER HYDRAULIC | 1 | |
| PWA85252 | PULLER HYDRAULIC | 1 | |
| PWA85635 | PULLER HYDRAULIC | 1 | |
| PWA85939 | PULLER HYDRAULIC | 1 | |
| PWA86483 | PULLER HYDRAULIC | 1 | |
| PWA87095 | PULLER HYDRAULIC HPC | 1 | |
| PWA87112 | PULLER HYDRAULIC HPC | 1 | |
| PWA87221 | PULLER HYDRAULIC HPC | 1 | |
| PWA9604 | PULLER (HYDRAULIC) | 1 | |
| PWAS7009 | PULLER HYDRAULIC | 1 | |
| PWC31634 | PULLER, HPT DISK (HYDRAULIC SET) | 3 | |
| PWC50588 | HYDRAULIC Puller H-3.0 | 4 | |
| PWC62703 | PULLER HYDRAULIC | 1 | |
| PWC71002 | HYDRAULIC PULLER CARBON SEAL | 1 | |
| SB-2A | Puller Unit - Air-actuated, hydraulic puller | 1 | |
| SB-300B | Puller Unit - Air-actuated, hydraulic puller | 1 | |
| WCI-1700-15 | PULLER UNIT - AIR-ACTUATED, HYDRAULIC PULLER | 1 | |
| WCI-1700-20 | CWT HYDRAULIC POWERPACK & PULLER GUN | 1 | |
| WCI-1700-20Q | PULLER UNIT - AIR-ACTUATED, HYDRAULIC PULLER | 3 | |
| WCI-1700-20QCE | CWT HYDRAULIC POWERPACK & PULLER GUN | 2 | |
| WCI-1800-70Q | PULLER UNIT - AIR-ACTUATED, HYDRAULIC PULLER | 2 | |
| WCI-1900-30Q | PULLER UNIT - AIR-ACTUATED, HYDRAULIC PULLER | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
