| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 115096-2 | HYD ASSEMBLY | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 15F2646 | AIR/HYD PUMP ASSEMBLY (CALIBRATION) | 1 | |
| (CALIB) J20009-110 | JACK ASSEMBLY - HYDRAULIC (CALIBRATION) (CALIBRATION) | 1 | |
| 01-1290-0100 | MULTI HEAD TOWBAR WITH HYDRAULIC WHEEL ASSEMBLY AND ATR-42-72 HEAD (NO INTERCAMBIABLE) | 4 | |
| 02-7924C0100 | JACK: AXLE,HYD,3STG,ASSEMBLY, | 2 | |
| 1102103 | DEHYDRATOR ASSEMBLY | 1 | |
| 1102118-101 | DEHYDRATOR ASSEMBLY | 1 | |
| 11C4598 | STAND-ASSEMBLY/DISASSEMBLE NO. 2 BEARING (WITH HYD PUMP) | 1 | |
| 11C4848G01 | HYDRAULIC MOTOR ASSEMBLY | 1 | |
| 15F2646 | AIR/HYD PUMP ASSEMBLY | 1 | |
| 15F2936 | HAND PUMP HYD ASSEMBLY | 1 | |
| 19286-1000 | Hydraulic Press Assembly | 1 | |
| 1976230-1 | HYDRAULIC CRIMPING HEAD ASSEMBLY | 1 | |
| 1C3569 | ASSEMBLY, NOZZLE - HYDRAULIC ACTUATOR UNIT | 1 | |
| 1C3569G02 | ASSEMBLY, NOZZLE-HYDRALIC ACTUATOR UNIT | 1 | |
| 1C3569G02/G003 | ASSEMBLY, NOZZLE-HYDRALIC ACTUATOR UNIT | 1 | |
| 1C3569G02/G03 | ASSEMBLY, HYDRAULIC ACTUATOR UNIT | 1 | |
| 1C3569G03 | ASSEMBLY, HYDRAULIC ACTUATOR UNIT | 1 | |
| 1C3569G3 | ASSEMBLY, HYDRAULIC ACTUATOR UNIT | 1 | |
| 23052537 | Pusher – Gas Generator Rotor Assembly, Hydraulic | 1 | |
| 23745-13 | HOSE ASSEMBLY FLEXIBLE, FUEL AND OIL HYDRAULIC PRE | 1 | |
| 289768-4 | FAN ASSEMBLY HYDRAULIC PULLER | 1 | |
| 293002-3 | FAN ASSEMBLY HYDRAULIC PULLER | 1 | |
| 2TSJ65B01503 | TEST FITTING ASSEMBLY - HYDRAULIC ACTUATOR ASSEMBLY, NOSE GEAR STEERING | 2 | |
| 3022053-000 | VARIABLE DISPLACEMENT HYDRAULIC PUMP ASSEMBLY | 1 | |
| 3022053-001 | VARIABLE DISPLACEMENT HYDRAULIC PUMP ASSEMBLY | 1 | |
| 350-4-3000 | COMPLETE HOSE ASSEMBLY, HYDRAULIC HOSE 9/16" WITH LENGTH 300 INCH | 1 | |
| 350A93-3717-00 | DISASSEMBLY - MAIN ROTOR MAST POST MOD 076120 (SINGLE HYDRAULIC) - ROTOR MAST | 2 | |
| 355A95-7500-00 | HYDRAULIC ACCESSORIES ASSEMBLY | 1 | |
| 355A95-7500-00/PHP | HYDRAULIC ACCESSORIES ASSEMBLY | 1 | |
| 355A95750000 | HYDRAULIC ACCESSORIES ASSEMBLY | 1 | |
| 39995-04 | HOSE ASSEMBLY – HYDRAULIC SUCTION 565-271 | 1 | |
| 489-102 | TOOL KIT , HYDRAULIC SHOP FOR MLG BRAKE ASSEMBLY | 1 | |
| 831381-1 | PULLER ASSEMBLY, HYDRAULIC TIGHT FITTING, AFT CURV | 1 | |
| 835213-1 | PUMP ASSEMBLY HYDRAULIC, SHAFT STRETCHING | 1 | |
| 930002 | JACK ASSEMBLY HYDRAULIC | 9 | |
| 98A2103000000 | ASSEMBLY TOOL HYDRAULIC SEALS | 1 | |
| 98A29103000000 | ASSEMBLY TOOL-HYDRAULIC SEALS | 13 | |
| 98A29103900000 | ASSEMBLY TOOL-HYDRAULIC SEALS | 1 | |
| 98A29103900001 | ASSEMBLY TOOL-HYDRAULIC SEALS | 1 | |
| 98D27403003052 | HYDRAULIC ASSEMBLY PUMP WITH PRESSURE HOSES | 1 | |
| 98D27403003210 | Hydraulic Assembly | 1 | |
| 98V27208779000 | EHA electro-hydraulic actuator disassembly tool | 6 | |
| A71015-146 | HYDRAULIC HOSE ASSEMBLY | 2 | |
| AB27001-Y2F | HYDRAULIC ASSEMBLY PUMP WITH PRESSURE HOSESFIXTURE STRUT THSA | 1 | |
| AGE12699 | HYDRAULIC MOTOR ASSEMBLY | 3 | |
| AGE13100 | HYDRAULIC MOTOR ASSEMBLY | 1 | |
| BP7000 | UNIT ASSEMBLY-POWER, AIR/HYDRAULIC | 6 | |
| C29003-1 | Seal Installation Equipment - Hydraulic Swivel Assembly | 8 | |
| C29003-8 | SEAL INSTALLATION EQUIPMENT - HYDRAULIC SWIVEL ASSEMBLY | 3 | |
| C29008-1 | Seal Compression Equipment - Hydraulic Swivel Assembly | 8 | |
| C32032-102 | Air Hydraulic Pump Assembly | 1 | |
| C32051-10 | 1/4 Inch Hydraulic tube Adapter Assembly | 2 | |
| C32051-11 | 3/8 Inch Hydraulic tube Adapter Assembly | 2 | |
| C32051-12 | 1/2 Inch Hydraulic tube Adapter Assembly | 1 | |
| C32051-13 | 5/8 Inch Hydraulic tube Adapter Assembly | 1 | |
| C32051-14 | 3/4 Inch Hydraulic tube Adapter Assembly | 1 | |
| C32051-15 | 1 Inch Hydraulic tube Adapter Assembly | 1 | |
| CAA334BP | RAM: CYLINDER,HYD,ASSEMBLY, | 2 | |
| CC02M1SA0 | CONTROL PANEL CC02M1SA0 (63A 400V IEC/CEE 6H 5POL STD+COVER ASSEMBLY), HYDRO | 1 | |
| CG9274102-0001 | HYDRAULIC DRAIN ASSEMBLY | 1 | |
| CG9274102-0011 | HYDRAULIC DRAIN ASSEMBLY | 1 | |
| CWACA | Meyer Hydraulics CWACA Wheel Assembly Engine | 3 | |
| DAT06AETA5005 | DEUTSCH LITE HEAD ASSEMBLY DAT06AETA5005 SIZE #5, 5/16″ INCH IS FOR SWAGING STAINLESS STEEL HYDRAULIC FITTINGS. | 1 | |
| F80049-12 | LOCK ASSEMBLY - FLIGHT CONTROLS (HYDRAULIC MODULE ELECTRICAL CONTROL BLOCKING TOOL) (THE BOEING COMPANY) | 8 | |
| F80049-2 | LOCK ASSEMBLY - FLIGHT CONTROLS (FLAP BY-PASS VALVE AND HYDRAULIC INTERCONNECT ELECTRICAL CONTROL BLOCKING TOOL)(AFT) (S (THE BOEING COMPANY) | 5 | |
| F80135-1 | Cable Assembly - Hydraulic Leakage Check | 5 | |
| F80135-10 | Cable Assembly - Hydraulic Leakage Check | 4 | |
| F80135-13 | Cable Assembly - Hydraulic Leakage Check | 14 | |
| G29011-1 | PLUG SET - PRESSURE AND FLUSH TEST, HYDRAULIC RESERVOIR ASSEMBLY | 1 | |
| H250T1-5000-2 | HYDRAULIC TANK ASSEMBLY | 1 | |
| HC1432 | FILTER: ASSEMBLY,HYD, | 2 | |
| HJ522-03-1 | RAM: HYD,ASSEMBLY, | 1 | |
| J20009-108 | JACK ASSEMBLY - HYDRAULIC | 7 | |
| J20009-109 | HYDRAULIC JACK ASSEMBLY | 11 | |
| J20009-110 | Hydraulic Jack Assembly | 12 | |
| J20009-136 | ADAPTER ASSEMBLY - TELESCOPING HYDRAULIC | 9 | |
| J20009-64 | ADAPTER ASSEMBLY - TELESCOPING HYDRAULIC 777-200ER, -200F, | 4 | |
| J20009-68 | ADAPTER ASSEMBLY - TELESCOPING HYDRAULIC | 15 | |
| J20009-88 | SPL-1584 ADAPTER ASSEMBLY - TELESCOPING HYDRAULIC | 9 | |
| J20089-68 | ADAPTER ASSEMBLY-TELESCOPING HYDRAULIC | 1 | |
| J29005-1 | PLUG SET - PRESSURE TEST, HYDRAULIC RESERVOIR ASSEMBLY | 1 | |
| J29005-30 | PLUG SET - PRESSURE TEST, HYDRAULIC RESERVOIR ASSEMBLY | 1 | |
| J32080-1 | FIXTURE EQUIPMENT - HYDRAULIC STRUT, ACTUATOR ASSEMBLY, MAIN LANDING GEAR | 1 | |
| J32080-23 | FIXTURE EQUIPMENT - HYDRAULIC STRUT, ACTUATOR ASSEMBLY, MAIN LANDING GEAR | 1 | |
| J32089-1 | FIXTURE EQUIPMENT - HYDRAULIC STRUT, ACTUATOR ASSEMBLY, MAIN LANDING GEAR | 1 | |
| J32089-124 | FIXTURE EQUIPMENT - HYDRAULIC STRUT, ACTUATOR ASSEMBLY, MAIN LANDING GEAR | 2 | |
| J32108-16 | VALVE ASSEMBLY,HYDRAULIC,AIRCRAF | 12 | |
| J49005-1 | ADAPTER ASSEMBLY - TELESCOPING HYDRAULIC | 2 | |
| J71009-17 | HYDRAULIC FUSE ASSEMBLY | 2 | |
| K-5367 | ASSEMBLY 5'DIA (HYDRAULIC LIFT) | 1 | |
| K32049-1 | TEST MANIFOLD ASSEMBLY - HYDRAULIC FLUSHING | 1 | |
| K32049-2 | Test manifold assembly-hydraulic flushing | 1 | |
| M525441-1 | REMOTE HYDRAULIC CRIMP HEAD ASSEMBLY (PUMP REQUIRED) | 1 | |
| MH13 | HOSE: HYD,ASSEMBLY, TTJ & TTJ3 TRANSMISSION JACKS | 3 | |
| MH18 | MEYER HYDRAULICS MH18 Hose Assembly | 2 | |
| MHP-1 | MANUAL HYDRAULIC PUMP /W HOSE ASSEMBLY | 1 | |
| MIT65B82314 | TEST ADAPTER - INBOARD HYDRAULIC RESERVOIR ASSEMBLY | 1 | |
| MST-80 | PRESURE SENSOR FOR PZL M-18 AIRCRAFT (ASSEMBLY: HYDRAULIC POWER) | 1 | |
| MT1025 | CLAMP,ASSEMBLY,HYDR | 2 | |
| MT348-2 | HYDRAULIC PUMP ASSEMBLY | 1 | |
| MT384-1 | HYDRAULIC PUMP ASSEMBLY | 1 | |
| PAF45180P | MEYER HYDRAULICS Pump Assembly, For AJS5 Aircraft Jack | 2 | |
| PAS60180P | PUMP: HYD,ASSEMBLY, FITS JACK MODEL TTJ & TTJ3 | 2 | |
| PF56112-3 | HYDRAULIC CART ASSEMBLY | 1 | |
| PPF56112-3 | HYDRAULIC CART ASSEMBLY - (15 GALLON FLUID DISPENSER ASSEMBLY) | 1 | |
| PWA80611 | JACK-HYDRAULIC - MAIN GEARBOX ASSEMBLY | 6 | |
| PWC37807 | HYDRAULIC PUMP (FAN BALANCING ASSEMBLY) | 7 | |
| RB T102118-101 | Dehydrator Assembly | 2 | |
| RBT400209-D4 | Drive and Sump Assembly Hydraulic Pump & Tachometer Drive Quil Backlash Tool | 1 | |
| SCTHN62-5 | NOSE ASSEMBLY - 5 INCH, .062 HYD. SCT | 1 | |
| T102103 | DEHYDRATOR ASSEMBLY | 1 | |
| T102118-101 | DEHYDRATOR ASSEMBLY | 1 | |
| T103286-101 | TOOL ASSEMBLY, CYCLIC CONTROL HYDRAULIC POWER CART. 1000 PSIG 2.5 GPM FLOW. RATE, 1500 PSIG 3.0 GPM FLOW. RATE) 2000 PSIG 4.0 GPM FLOW. RATE) | 1 | |
| T900314−01 | "HYDRAULIC PUMP ASSEMBLY (PART OF HTCS GROUND SUPP | 1 | |
| TBHD1M | Remote Hydraulic Crimp Head Assembly | 2 | |
| TSJ65B82591 | TEST FITTING ASSEMBLY - HYDRAULIC ACTUATOR ASSEMBLY, NOSE GEAR STEERING | 2 | |
| VSV1-1 | ASSEMBLY, HYDRAULIC ACTUATOR UNIT | 1 | |
| XHC136 | Hydraulic Crimp Head Assembly | 1 | |
| XHC136C | Hydraulic Crimp "C" Head Assembly | 2 | |
| Z-8659 | ASSEMBLY 5'DIA (HYDRAULIC LIFT) | 1 | |
| Z1675-02 | HOSE: HYD,ASSEMBLY, | 1 | |
| Z1698-01 | HOSE: HYD,ASSEMBLY, | 1 | |
| Z1698-01-1 | HOSE: HYD,ASSEMBLY, | 1 | |
| 289768-4 | FAN ASSEMBLY HYD PULLER | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
