| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| C32045-23 | HOLDING F | 5 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| PWC70955 | FIXTURE HOLDING | 3 | |
| F70320-1 | Holding Fixture - Control Column | 10 | |
| H3275538CK1 | HOLDING FIXTURE (BASE) | 1 | |
| H3275538CK1-1 | HOLDING FIXTURE (BASE) | 1 | |
| H3275538CK1-2 | HOLDING FIXTURE (BASE) | 1 | |
| (CALIB) 98D27407502000 | HOLDING FIXTURE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D47103500000 | HOLDING FIXTURE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D52003006000 | HOLDING HOLDIND-REPLACE FITTING HINGE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D71203003000 | HOLDING FIXTURE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9551001-0001 | H - STAB INSIDE FUSE HOLDING TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PWC34913 | FIXTURE HOLDING | 1 | |
| 0061R55434 | HOLDING FIXTURE | 1 | |
| 0110E102450-18 | FIXTURE, HOLDING ASSEMBLY | 1 | |
| 0110E102540-18 | FIXTURE HOLDING | 1 | |
| 024922-100-M2 | FIXTURE HOLDING | 1 | |
| 04-99513 | TOGGLE CLAMPS ( HOLDING CAPACITY: VARIES )( JAW GAP: 1-1/16" (27 MM) )( JAW REACH: 4" )( OVERALL LENGTH: 11-3/32" (282 MM) )( SPINDLE THREAD: 5/16"-24, OFFSET ) | 1 | |
| 0U 190822 | T.H.S.A. HOLDING FIXTURE | 1 | |
| 0U142574 | HOLDING FIXTURE | 1 | |
| 0U144972 | HOLDING FIXTURE | 1 | |
| 0U190822 | THSA HOLDING FIXTURE | 1 | |
| 100-52754 | Fixture Holding | 1 | |
| 100000-S96-3 | HOLDING FIXTURE PIN REMOVAL – MANIFOLD | 1 | |
| 1001246-HFP | PIN HOLDING FIXTURE | 1 | |
| 10108 | A350 VERTICAL SUPPORT TO HOLD THE HOLDING FIXTURE IN VERTICAL POSITION | 1 | |
| 10260-BASE | HOLDING FIXTURE ASSEMBLY DISSESAMBLY (2IT) | 1 | |
| 106-1-3008 | HOLDING FIXTURE | 1 | |
| 106-1-3404 | HOLDING FIXTURE | 1 | |
| 109011105101E318A | HOLDING FIXTURE GRIP REWORK PART | 1 | |
| 10C1259G01 | Fixture,Holding-Hpt Shroud Support | 1 | |
| 10C1295G01 | Fixture,holding-race,outer,No.4 bearing | 1 | |
| 10C2210G01 | Fixture-base holding | 1 | |
| 11-7225 | GAP HOLDING FIXTURE | 1 | |
| 11-7226 | GAP HOLDING FIXTURE | 1 | |
| 110068-1 | NOSE COWL HOLDING FIXTURE (DC10 SERIES 40/JT-9D) | 1 | |
| 14300 | WILTON® HI-VIS SAFETY C-CLAMPS HOLDING CAPACITY: 3500 LBS | 1 | |
| 190822 | THSA HOLDING FIXTURE | 1 | |
| 1101573 | HOLDING FIXTURE | 1 | |
| 1102069 | HOLDING FIXTURE ASSEMBLY | 1 | |
| 1106470-2 | HOLDING FIXTURE | 1 | |
| 1107261HF1 | HOLDING FIXTURE | 1 | |
| 114-1045 | Holding tool for outer half | 1 | |
| 114-1060 | Holding tool for outer half | 1 | |
| 114-1061 | Holding tool for inner half | 1 | |
| 114-1101 | Holding tool for torque plate bushing removal/installation | 1 | |
| 114-1369 | Holding tool for inner half | 1 | |
| 114-1572 | Outer Wheel Half Holding Tool | 3 | |
| 114-1573 | Outer Wheel Half Holding Tool | 3 | |
| 114-1574 | Inner Wheel Half Holding Tool | 3 | |
| 114-1575 | Inner Wheel Half Holding Tool | 3 | |
| 114-350 | Outer Half wheel holding tool | 1 | |
| 114-351 | Inner Half wheel holding tool | 1 | |
| 114-454 | Outer Half wheel holding tool | 1 | |
| 114-455 | Inner Half wheel holding tool | 1 | |
| 1181-842 | Holding fixture | 1 | |
| 123T12 | MIRROR HOLDING FIXTURE | 1 | |
| 13083230 | HOLDING FIXTURE, ASS | 1 | |
| 139W00-542-01 | HOLDING PLATE (FOR BENDING TOOL) | 1 | |
| 14-6896-6000 | HOLDING FIXTURE (CONSISTS OF HOLDING FIXTURE, STOP PLATE AND INSERT) | 3 | |
| 1561240AT1 | HOLDING FIXTURE | 1 | |
| 1610000F13 | HOLDING FIXTURE | 1 | |
| 1610000F19 | HOLDING FIXTURE | 1 | |
| 16A11193-3 | FIXTURE ASSY, HOLDING - RIB/SPAR, BL 71, LH | 1 | |
| 16A11194-3 | FIXTURE ASSY, HOLDING - RIB/SPAR, BL 71, RH | 1 | |
| 16A11195-3 | FIXTURE ASSY, HOLDING - RIB/SPAR, EL 120, LH | 1 | |
| 16A11196-3 | FIXTURE ASSY, HOLDING - RIB/SPAR, EL 120, RH | 1 | |
| 16ADA27807 | GSC HOLDING FIXTURE | 1 | |
| 1778050-2 | HOLDING FIXTURE | 1 | |
| 17G230022-1 | TR FAN DUCT HOLDING FIXTURE | 1 | |
| 18-5600-1 | HOLDING FIXTURE | 1 | |
| 18C1028 | FIXTURE, TEST/HOLDING - NO 5 BRG HOUSING | 1 | |
| 1900134 | VALVE HOLDING FIXTURE | 1 | |
| 1900210 | HOLDING FIXTURE | 1 | |
| 18903470000 | HOLDING FIXTURE | 1 | |
| 18903480000 | HOLDING FIXTURE KIT | 1 | |
| 18C1007G01 | Fixture, Holdinghp Turbine Stage 2 | 1 | |
| 18C1508 | FIXTURE, HOLDING - NO. 1 BEARING AFT INNER RACE | 1 | |
| 1900541A | HOLDING FIXTURE | 1 | |
| 1900664 | Holding Fixture | 1 | |
| 1900854 | DRIVE SHAFT HOLDING FIXTURE | 1 | |
| 1C6001 | FIXTURE, HOLDING- LOW PRESSURE TURBINE ROTOR FORWA | 1 | |
| 1C6276 | STAGE 4, SEAL HOLDING FIXTURE | 1 | |
| 1C6277 | STAGE 5, SEAL HOLDING FIXTURE | 1 | |
| 1C6278 | STAGE 6, SEAL HOLDING FIXTURE | 1 | |
| 1C6896 | FIXTURE, HOLDING - PTR TO TRF | 1 | |
| 1C6896G01 | FIXTURE, HOLDING - PTR to TRF | 1 | |
| 1C6908 | FIXTURE, HOLDING - COMPRESSOR | 1 | |
| 1C6908G01 | FIXTURE, HOLDING - COMPRESSOR | 1 | |
| 1C6996 | FIXTURE, HOLDING, POWER TURBINE ROTOR | 1 | |
| 2023-0101W01 | HOLDING FIXTURE | 1 | |
| 2024177-1 | Torque Wrench Holding Fixture | 1 | |
| 2024841-1 | Holding Fixture | 1 | |
| 2024985-1 | Test Holding Fixture | 1 | |
| 2025577 | HOLDING FIXTURE | 1 | |
| 2025581-1 | HOLDING FIXTURE | 1 | |
| 204-040-009-1 | HOLDING FIXTURE | 1 | |
| 204-040-009-1PAT-2D | HOLDING FIXTURE | 1 | |
| 204-040-366-3A5A-1-6D | HOLDING FIXTURE | 1 | |
| 2040156-0501 | HOLDING FIXTURE | 1 | |
| 206-240-002-101 | HOLDING FIXTURE, MAST | 1 | |
| 207SFRH | WRENCH CROWFOOT (IDSC HOLDING LLC, DBA SNAP-ON INDUSTRIAL DIV) | 2 | |
| 211FCO | WRENCH CROWFOOT (IDSC HOLDING LLC, DBA SNAP-ON INDUSTRIAL DIV) | 1 | |
| 212-040-001-3GIF-1D2 | HOLDING FIXTURE | 1 | |
| 21463-T200 | HOLDING FIXTURE | 1 | |
| 21463−T200 | HOLDING FIXTURE | 1 | |
| 219000F1 | HOLDING FIXTURE | 1 | |
| 21C7194G01 | VERTICAL HOLDING FIXTURE P.T. | 1 | |
| 21C7406P01 | FIXTURE, HOLDINGSEAL | 1 | |
| 21C8100G01 | FRONT FRAME HOLDING | 1 | |
| 21C8139G02 | FAN CASE HOLDING | 1 | |
| 21C8284G01 | FIXTURE, LPT MODULE ASSEMBLY HOLDING | 1 | |
| 21C8861G01 | FIXTURE, HOLDING, TORQUE - MOUNT, ENGINE FRONT | 1 | |
| 22282-T200 | HOLDING FIXTURE ASSEMBLY | 2 | |
| 22282T200 | HOLDING FIXTURE | 2 | |
| 22479T200 | HOLDING FIXTURE | 1 | |
| 22617-T200 | HOLDING FIXTURE | 3 | |
| 22617T200 | Holding Fixture | 3 | |
| 22617T200 PM | HOLDING FIXTURE | 1 | |
| 23008710 | FIXTURE----HOLDING GAS PRODUCER ROTOR | 3 | |
| 23033031 | FIXTURE--HOLDING, FRONT BEARING HOUSING 7 | 1 | |
| 23033043 | FIXTURE--HOLDING, SERIES II 4TH STAGE NOZZLE | 1 | |
| 23037982 | FIXTURE--HOLDING, COMPRESSOR FIRST-, SECOND-, THIRD-, AND FOURTH-STAGE VANE ASSEMBLY | 1 | |
| 23052541 | Fixture – Holding, Inner Gas Generator Case Assembly | 1 | |
| 23055763 | Fixture – Holding, Turbine Wheel Assembly Grind Fixture | 1 | |
| 23055805 | Fixture – Holding Forward Yoke, Pull Test | 1 | |
| 23058496 | Fixture – Compressor Case, Lathe Holding | 1 | |
| 23058496-2 | FIXTURE – COMPRESSOR CASE, LATHE HOLDING | 1 | |
| 23058497 | Adapter – Compressor Forward Shaft Holding | 1 | |
| 23063520 | Fixture – Holding, Rear Stationary Seal | 1 | |
| 23066532 | Fixture – Holding, Center Sump Housing FWD | 1 | |
| 2311M84-904 | Worm Holding Fixture | 1 | |
| 23278T202 | Holding Fixture | 1 | |
| 23278T203 | Holding Fixture | 1 | |
| 23555F2 | Holding Fixture | 1 | |
| 23611T1 | Holding Fixture | 1 | |
| 23730T200 | FIXTURE HOLDING | 1 | |
| 23730T200 | Holding Fixture | 1 | |
| 23734T200 | FIXTURE HOLDING | 1 | |
| 23734T200 | Holding Fixture | 1 | |
| 23747T200 | FIXTURE HOLDING | 1 | |
| 23747T200 | Holding Fixture | 1 | |
| 23747T201 | FIXTURE HOLDING | 1 | |
| 24599T200 | Holding Fixture | 1 | |
| 247C5168 | FIXTURE, HOLDING - ACTUATING SYSTEM (LMS100) | 1 | |
| 25219T1 | FIXTURE HOLDING | 1 | |
| 25333T1 | FIXTURE HOLDING | 1 | |
| 254A1150-TT | HOLDING TEST FIXTURE | 1 | |
| 2550144 | Fixture, holding, drive body | 2 | |
| 2550146 | Fixture, holding, weight table | 3 | |
| 2557866 | Shuttle Valve Bleed Holding Fixture | 1 | |
| 2561508 | Holding Fixture | 1 | |
| 2561523 | Holding Fixture | 1 | |
| 2561697 | Fixture, bellows holding | 1 | |
| 256A3310-7HF | HOLDING FIXTURE (2IT) | 1 | |
| 256T2151-11-HF | BUSHING HOLDING FIXTURE (3 IT) | 1 | |
| 25Y1315A | OVERHAUL MLG HOLDING FIXTURE | 1 | |
| 25Y1319A | FIXTURE - HOLDING | 1 | |
| 26015080-101 | HOLDING FIXTURE ASSEMBLY | 1 | |
| 26015080-102 | HOLDING FIXTURE ASSEMBLY | 1 | |
| 26015080-202 | HOLDING FIXTURE ASSEMBLY | 1 | |
| 26122-AF1 | INLET COVER HOLDING FIXTURE | 1 | |
| 26122AF1 | INLET COVER HOLDING FIXTURE | 1 | |
| 26145AT1 | HOLDING FIXTURE | 1 | |
| 26616-AF1 | PORT CAP HOLDING FIXTURE | 1 | |
| 266500TF1 | HOLDING TEST FIXTURE (WP 0014 00, TABLE 1, ITEM 13) | 1 | |
| 26719AF1 | HOLDING FIXTURE | 1 | |
| 270-5510 | HOLDING FIXTURE | 1 | |
| 2700187LAT3 | Holding Fixture | 1 | |
| 272663 | TORQUE WRENCH HOLDING FIXTURE | 1 | |
| 274000AT4 | ASSEMBLY HOLDING FIXTURE | 1 | |
| 274040AT1 | ACTUATOR ASSEMBLY HOLDING FIXTURE | 1 | |
| 289639-1 | WRENCH,HOLDING,SHAFT ASSEMBLY | 2 | |
| 2896391 | WRENCH-HOLDING,STARTER G/SHAFT ASSY | 2 | |
| 289766-1 | SHAFT HOLDING WRENCH | 1 | |
| 291349-1 | WRENCH GEAR SHAFT HOLDING | 1 | |
| 293733-1 | HOLDING AND PRESS FIXTURE | 1 | |
| 293824-1 | BORING MACHINE GEAR BOX HOLDING FIXTURE | 1 | |
| 2938A0400-01 | HOLDING FIXTURE | 1 | |
| 294123-1 | COMPRESSOR WHEEL HOLDING FIXTURE | 1 | |
| 294436-1 | TAILPIPE HOLDING FIXTURE | 1 | |
| 294527-1 | FIXTURE SEAL, HOLDING | 1 | |
| 296395-1 | STATOR ASSEMBLY HOLDING FIXTURE | 1 | |
| 298106-1 | HOLDING&INDEXING FIXTURE ASSY | 1 | |
| 298106-2 | HOLDING & INDEXING FIXTURE ASSY | 1 | |
| 298251-1 | HOLDING FIXTURE | 1 | |
| 2C14104G01 | FIXTURE, HOLDING - NO.4 BRG AFT INNER RACE | 3 | |
| 2C14722G01 | FIXTURE - RUNOUT HOLDING | 3 | |
| 2C14762G01 | FIXTURE, HOLDING ‐ ROTOR/STATOR LPT ‐ SPLIT ENGINE | 1 | |
| 2C14783G03 | HOLDING FIXTURE | 1 | |
| 2C6259 | VANE HOLDING FIXTURE SET | 1 | |
| 2C6259G04 | VANE HOLDING FIXTURE SET | 1 | |
| 2C6259G05 | FIXTURE, HOLDING - VARIABLE STATOR ARMS, | 1 | |
| 2C6549 | FIXTURE, HOLDING - | 1 | |
| 2C6549G01 | FIXTURE, HOLDING-COMPRESSOR | 1 | |
| 2C6807G01 | LPTR TRF HOLDING FIXT. | 1 | |
| 2C6870 | FIXTURE, HOLDING STG. I LOW PRESS. TURB. BLADE FMF 2C686I | 1 | |
| 2C6870 REV A | FIXTURE, HOLDING STG. I LOW PRESS. TURB. BLADE FMF 2C686I | 1 | |
| 2C6871 | FIXTURE, HOLDING STG. 2 LOW PRESS. TURB. BLADE FMF 2C686I | 1 | |
| 2C6871 REV A | FIXTURE, HOLDING STG. 2 LOW PRESS. TURB. BLADE FMF 2C686I | 1 | |
| 2C6872 | FIXTURE, HOLDING STG. 3 LOW PRESS. TURB. BLADE FMF 2C686I | 1 | |
| 2C6872 REV A | FIXTURE, HOLDING STG. 3 LOW PRESS. TURB. BLADE FMF 2C686I | 1 | |
| 2C6873 | FIXTURE, HOLDING STG. 4 LOW PRESS. TURB. BLADE FMF 2C686I | 1 | |
| 2C6873 REV A | FIXTURE, HOLDING STG. 4 LOW PRESS. TURB. BLADE FMF 2C686I | 1 | |
| 2C687I | FIXTURE, HOLDING STG. 2 LOW PRESS. TURB. BLADE FMF 2C686I | 1 | |
| 2C7144 | FOXTURE,HOLDING-COMPRESSOR ROT | 1 | |
| 2C7144G01 | FOXTURE,HOLDING-COMPRESSOR ROT | 1 | |
| 2C7145 | FIXTURE,HOLDING-COMPRESSOR ROT | 1 | |
| 2C7145G01 | FIXTURE,HOLDING-COMPRESSOR ROT | 1 | |
| 2C7146 | FIXTURE,HOLDING-NO.4R BEARING | 1 | |
| 2C7146G01 | FIXTURE,HOLDING-NO.4R BEARING | 1 | |
| 2C7147G02 | FIXTURE, HOLDING, ROT AIR SEAL, NO. 4 BEARING | 1 | |
| 2C7147P02 | FIXTURE, HOLDING, ROT AIR SEAL, NO. 4 BEARING | 1 | |
| 2C7148G03 | Fixture, Holding, Nut, Seal, No. 4R Brg | 1 | |
| 2C7149 | FIXTURE,HOLDING-NO.4R BEAR SEA | 1 | |
| 2C7149G01 | Fixture, Holding, Air Vent Seal, No. 4R Brg | 1 | |
| 2C7149G01 | FIXTURE,HOLDING-NO.4R BEAR SEA | 1 | |
| 2C7283G04 | FIXTURE, HOLDING - J | 1 | |
| 2C7399 | FIXTURE, HOLDING - FAN BLADE STG. 1 | 1 | |
| 2C7399 REV C | FIXTURE, HOLDING - FAN BLADE STG. I | 1 | |
| 2C7789G01 | HOLDING FIXTURE | 1 | |
| 2C81041 | FIXTURE, HOLDING/SHIPPING - HP | 1 | |
| 2C81041G01 | FIXTURE, HOLDING/SHIPPING - HP | 1 | |
| 2C81041G02 | FIXTURE − HOLDING, SHIPPING, HPT MODULE | 1 | |
| 2C81041G03 | Fixture, Holding/ Shipping -Hpt Module | 1 | |
| 2C81225 | FIXTURE, HOLDING HPC STATOR | 1 | |
| 2C81225G01 | FIXTURE, HOLDING, HPC STATOR | 1 | |
| 2C81305G01 | FIXTURE, HOLDING - STAGE 2 NOZZLE | 1 | |
| 2C81431G01 | FIXTURE HOLDING HPT ROTOR | 1 | |
| 2C81631G01 | Fixture, Holding Bevel Gear Pto | 1 | |
| 2C81801 | FIXTURE, HOLDING GENERAL PURP | 1 | |
| 2C81801G01 | FIXTURE HOLDING - GENERAL PURPOSE | 1 | |
| 2C90715G01 | FIXTURE, GG ROTOR DROP CHECK HOLDING | 1 | |
| 2C91097G01 | FIXTURE - OIL TANK HOLDING | 1 | |
| 2C91137G01 | FIXTURE-HOLDING FAN DISK | 1 | |
| 2C91186G01 | FIXTURE-HOLDING LPT | 1 | |
| 2C91288P01 | FIXTURE - HOLDING - TRANSITION CASING | 1 | |
| 2C91354 | FIXT, HOLDING-SENSOR BYPASS FILTER, OIL | 1 | |
| 2C91354-G01 | HOLDING FIXTURE | 5 | |
| 2C91354G01 | Holding Fixture − Oil Filter By− Pass Sensor (Alternate) | 5 | |
| 2C91354G02 | Holding Fixture − Oil Filter By− Pass Sensor (Recommended) | 10 | |
| 2R1081G01 | Fixture,holding-stg 1 compr rotor disk | 1 | |
| 3011570CF1 | HOLDING FIXTURE | 1 | |
| 30131 | HOLDING FIXTURE | 1 | |
| 3021520-6 | HOLDING FIXTURE | 1 | |
| 3042000F22 | Holding Fixture | 1 | |
| 3042000F24 | Holding Fixture | 1 | |
| 3042031F11 | Holding Fixture | 1 | |
| 3065A0000-01 | HOLDING FIXTURE | 1 | |
| 30827 | HOLDING FIXTURE | 1 | |
| 30R0338G01 | (RT) FIXTURE, HOLDING | 1 | |
| 3120A0000-01 | HOLDING FIXTURE | 1 | |
| 3170014-1 | NOSE STRUT HOLDING FIXTURE | 1 | |
| 32-01052-1F1 | FIXTURE, HOLDING | 1 | |
| 32-01055-1F1 | FIXTURE, HOLDING | 1 | |
| 3218AS970-1 | HOLDING FIXTURE | 1 | |
| 321A96-0060-01 | DAMPERHOLDING FRAME | 1 | |
| 324425-A | VALVE TEST HOLDING FIXTURE (2 IT) | 1 | |
| 3268792-HF | HOLDING FIXTURE | 1 | |
| 326975-A | VALVE TEST HOLDING FIXTURE (2 IT) | 1 | |
| 330A98-3348-01 | HOLDING FIXTURE | 1 | |
| 332A93-3119-00 | TOOL,SPINDLE HOLDING FIXTURE | 1 | |
| 332A94-2720-00 | DAMPER HOLDING FRAME (REF ICO 92-41-00-01-100) | 1 | |
| 3404059-1 | HOLDING FIXTURE, ELEVATOR | 1 | |
| 350A93-3205-00 | MGB Input Lock Wrench/Holding Fixture | 2 | |
| 350A93-3205-00E | ENGINE GEAR BOX INPUT FLANGE HOLDING WRENCH | 1 | |
| 350A93-3205-00T | TAIL ROTOR GEAR BOX INPUT FLANGE HOLDING WRENCH | 1 | |
| 350A93-3302-01 | T/R Hub Holding Fixture - Yoke Restraint | 1 | |
| 350A93-3302-02 | T/R YOKE HOLDING FIXTURE | 1 | |
| 360A93-3201-01 | FLANGE HOLDING TOOL | 1 | |
| 360A93-3207-00 | FLANGE HOLDING WRENCH | 1 | |
| 360A93-3207-00/PHP | FLANGE HOLDING WRENCH | 1 | |
| 360A93-3221-00 | WRENCH MGB FAN HOLDING | 1 | |
| 360A93-3221-00/PHP | WRENCH MGB FAN HOLDING | 1 | |
| 360A93320700 | FLANGE HOLDING WRENCH | 1 | |
| 360A93322100 | WRENCH MGB FAN HOLDING | 1 | |
| 369A5107-3 | HOLDING FIXTURE INPUT GEAR "C" MODEL MAIN ROTOR | 1 | |
| 369D29915 | OUTPUT GEARSHAFT HOLDING FIXTURE | 1 | |
| 3738 | STARTER SHAFT HOLDING TOOL | 5 | |
| 376050AT1 | HOLDING FIXTURE | 1 | |
| 3791115-1 | Torque Holding Fixture | 1 | |
| 3791128-1 | HOLDING FIXTURE | 1 | |
| 3791336-1 | Wheel holding fixture | 1 | |
| 3800022LAT1 | Holding Fixture | 1 | |
| 381844AT1 | Holding Fixture | 1 | |
| 381900AT2-103 | HOLDING FIXTURE | 1 | |
| 3831111LAT1 | Holding Fixture | 1 | |
| 3S81071-101 | FIXTURE ASSEMBLY HOLDING CORE HONEYCOMB REPAIR | 1 | |
| 3SV-6386 | Holding Fixture | 1 | |
| 3SV6386 | HOLDING FIXTURE | 1 | |
| 40081-T600 | HOLDING FIXTURE | 1 | |
| 4041041-001 | FIXTURE, COMPRESSOR HOLDING | 1 | |
| 40743079ST | BODY HOLDING FIXTURE (BENCH MOUNTED) | 1 | |
| 41121T603 | HOLDING FIXTURE | 1 | |
| 412-240-008-101 | HOLDING FIXTURE | 1 | |
| 41446-T600 | HOLDING FIXTURE | 1 | |
| 41446-T602 | HOLDING FIXTURE | 1 | |
| 41565-T600 | HOLDING FIXTURE | 1 | |
| 41762T600 | HOLDING FIXTURE | 1 | |
| 41F9003-HF | HOLDING FIXTURE | 1 | |
| 42249T600 | HOLDING FIXTURE | 1 | |
| 427-240-141-101 | HOLDING FIXTURE | 1 | |
| 43454-T-600 | HOLDING FIXTURE | 1 | |
| 45755 | HOLDING FIXTURE | 1 | |
| 460002002 | HOLDING FIXTURE | 1 | |
| 460002878 | HOLDING FIXTURE | 1 | |
| 460005845 | SETTING AND HOLDING FIXTURE | 1 | |
| 460005857 | HOLDING FIXTURE | 1 | |
| 460005857-1 | HOLDING FIXTURE | 1 | |
| 460005857/1 | Holding Fixture | 1 | |
| 5509 | HOLDING FIXTURE | 1 | |
| 51131 | HOLDING FIXTURE | 1 | |
| 460005985 | HOLDING FIXTURE | 1 | |
| 460006122 | HOLDING FIXTURE | 1 | |
| 460006231 | HOLDING FIXTURE | 7 | |
| 460006403 | HOLDING FIXTURE | 2 | |
| 460006435 | HOLDING FIXTURE | 4 | |
| 460006438 | HOLDING FIXTURE | 5 | |
| 460006442 | SPANNER-HOLDING (IF CONDITION) | 11 | |
| 460006469 | HOLDING FIXTURE | 1 | |
| 460007103 | HOLDING FIXTURE | 10 | |
| 460007111 | DRIFT HOLDING | 8 | |
| 460007131 | Holding Fuxture | 1 | |
| 460007151 | HOLDING FIXTURE | 1 | |
| 460007338 | HOLDING FIXTURE | 1 | |
| 4600067103 | HOLDING FIXTURE | 1 | |
| 4600067338 | HOLDING FIXTURE | 1 | |
| 4920-00-037-8100 | Holding Fixture, Inst | 1 | |
| 4920-00-272-5650 | GAP HOLDING FIXTURE | 1 | |
| 4920-00-904-4248 | Fixture, Holding | 1 | |
| 4D1691-12 | HOLDING FIXTURE DISASSEMBLY | 1 | |
| 4D1691-2 | HOLDING FIXTURE | 1 | |
| 4F60160 | Holding Fixture, Fluid Flow Test Setup (2IT) | 1 | |
| 50000-T43 | HOLDING FIXTURE | 1 | |
| 5050D | HEATER AIRCRAFT (TRILECTRON INDUSTRIES, INC. (DIV. GSE HOLDINGS INC)) | 1 | |
| 508375-100 | SHAFT PRESS HOLDING | 1 | |
| 510-010 | PIPEFITTER'S CHAIN VISE, OR OTHER HOLDING STAND- TO HOLD RESERVOIR DURING DISSASSEMBLY/ASSEMBLY (AND SAFETY) | 1 | |
| 51154T1 | HOLDING FIXTURE (PARKER HANNIFIN CORPORATION) | 1 | |
| 51774-T2 | HOLDING FIXTURE | 1 | |
| 51774T2 | HOLDING FIXTURE (OUT) | 1 | |
| 51774T2PM | HOLDING FIXTURE (OUT) | 1 | |
| 52007S1000 | HOLDING FIXTURE | 1 | |
| 5221-13A | CYLINDER HOLDING FIXTURE ADAPTERS | 1 | |
| 5221-16A | CYLINDER HOLDING FIXTURE ADAPTER | 1 | |
| 5221B | CYLINDER HOLDING FIXTURE | 1 | |
| 53065-AF1 | HOLDING FIXTURE | 1 | |
| 53065-AT7 | HOLDING FIXTURE | 1 | |
| 53065AF1 | HOLDING FIXTURE | 1 | |
| 53065AT7 | HOLDING FIXTURE | 1 | |
| 55518S0000 | HOLDING FIXTURE | 1 | |
| 55569S0000 | HOLDING FIXTURE | 1 | |
| 55576S0000 | HOLDING FIXTURE | 1 | |
| 55605S0000 | HOLDING FIXTURE | 1 | |
| 55606S0000 | HOLDING FIXTURE | 1 | |
| 55620S0000 | HOLDING FIXTURE | 1 | |
| 55642S0000 | HOLDING FIXTURE | 1 | |
| 55645S0000 | HOLDING FIXTURE | 1 | |
| 55658S0000 | HOLDING FIXTURE | 1 | |
| 55672S0000 | HOLDING FIXTURE | 1 | |
| 55794S0001 | HOLDING FIXTURE | 1 | |
| 558-1-13561 | Adjustable holding fixture | 1 | |
| 55871S0000 | HOLDING FIXTURE | 1 | |
| 56402T3 | HOLDING FIXTURE | 1 | |
| 56403T1 | HOLDING FIXTURE | 1 | |
| 56472S0000 | TORQUE CHECKING/HOLDING FIXTURE | 2 | |
| 56512- T3 | HOLDING FIXTURE | 1 | |
| 56512-T2 | HOLDING FIXTURE | 1 | |
| 56512T2 | HOLDING FIXTURE | 1 | |
| 56512T2PM | HOLDING FIXTURE | 1 | |
| 56561S0001 | HOLDING FIXTURE | 1 | |
| 56572T1 | HOLDING FIXTURE | 1 | |
| 56578S0001 | HOLDING FIXTURE | 2 | |
| 56580S0000 | HOLDING FIXTURE | 1 | |
| 56599S0000 | HOLDING FIXTURE | 1 | |
| 56600S0000 | HOLDING FIXTURE | 1 | |
| 56627T1 | HOLDING FIXTURE | 1 | |
| 56628T1 | HOLDING FIXTURE | 1 | |
| 56632-T2 | HOLDING FIXTURE | 1 | |
| 56632T2 | HOLDING FIXTURE | 1 | |
| 56632T2PM | HOLDING FIXTURE | 1 | |
| 56649S0000 | HOLDING FIXTURE | 1 | |
| 56649S0000 | HOLDING FIXTURE (9IT) | 1 | |
| 56650S0000 | HOLDING FIXTURE | 1 | |
| 56652S0000 | HOLDING FIXTURE | 1 | |
| 56699T4 | HOLDING FIXTURE | 1 | |
| 56724S0000 | HOLDING FIXTURE | 11 | |
| 56739S0000 | HOLDING FIXTURE | 1 | |
| 56740S0000 | HOLDING FIXTURE | 1 | |
| 56741S0000 | HOLDING FIXTURE | 1 | |
| 56837A0000-01 | HOLDING FIXTURE | 1 | |
| 56838A0000-01 | HOLDING FIXTURE | 1 | |
| 56932-T2 | Holding Fixture | 1 | |
| 56932T2 | HOLDING FIXTURE | 1 | |
| 56961A0000-01 | HOLDING FIXTURE | 1 | |
| 56963A0000-01 | HOLDING FIXTURE | 1 | |
| 56964A0000-01 | HOLDING FIXTURE | 1 | |
| 56980A0000-01 | HOLDING FIXTURE | 1 | |
| 56994A0000-01 | HOLDING FIXTURE | 1 | |
| 57018A0000-01 | HOLDING FIXTURE | 1 | |
| 57112A0000-01 | HOLDING FIXTURE | 1 | |
| 57481T4 | HOLDING FIXTURE | 1 | |
| 57593A0000-01 | HOLDING FIXTURE | 2 | |
| 57925-T1 | HOLDING FIXTURE | 1 | |
| 57925T1 | HOLDING FIXTURE | 1 | |
| 57925T601 | HOLDING FIXTURE | 1 | |
| 57949A0000-01 | HOLDING FIXTURE | 2 | |
| 57949A0000‐01 | FIXTURE,HOLDING,NOSE LANDING GEAR | 2 | |
| 57952-T1 | HOLDING FIXTURE | 1 | |
| 57952T1 | HOLDING FIXTURE | 1 | |
| 57975A0000-01 | HOLDING FIXTURE | 1 | |
| 57996T1 | HOLDING FIXTURE | 1 | |
| 57996T3 | HOLDING FIXTURE | 1 | |
| 58098A0000-01 | Holding Fixture | 1 | |
| 58115A0000-01 | HOLDING FIXTURE | 1 | |
| 58222A0000-01 | HOLDING FIXTURE | 1 | |
| 58463A0000-01 | HOLDING FIXTURE | 1 | |
| 58517A0000-01 | HOLDING FIXTURE | 1 | |
| 58613-T1 | Holding Fixture | 1 | |
| 58613T1 | HOLDING FIXTURE | 1 | |
| 58692T1 | HOLDING FIXTURE | 1 | |
| 58812A0000-01 | MLG HOLDING FIXTURE TOOL | 1 | |
| 59012A0000-01 | MLG HOLDING FIXTURE TOOL | 1 | |
| 59115A0000-01 | HOLDING FIXTURE | 1 | |
| 59137A0000-01 | HOLDING FIXTURE | 1 | |
| 59194A0000-01 | HOLDING FIXTURE | 1 | |
| 59199A0000-01 | HOLDING FIXTURE | 1 | |
| 59218A0000-01 | HOLDING FIXTURE | 1 | |
| 59493A0000-01 | Holding Fixture | 1 | |
| 59512A0000-01 | FIXTURE-HOLDING | 1 | |
| 59549A0000-01 | FIXTURE-HOLDING | 1 | |
| 59613A0000-01 | HOLDING FIXTURE | 1 | |
| 59614A0000-01 | HOLDING FIXTURE | 1 | |
| 59654-T200 | HOLDING FIXTURE | 1 | |
| 59654-T200PM | HOLDING FIXTURE | 1 | |
| 59654T200 | HOLDING FIXTURE | 1 | |
| 59654T200 | Holding Fixture base | 1 | |
| 59654T200PM | HOLDINGFIXTUREBASE | 1 | |
| 59656-T2 | HOLDING FIXTURE | 2 | |
| 59656T002 | HOLDING FIXTURE | 1 | |
| 59656T2 | HOLDING FIXTURE | 2 | |
| 59662A0000-01 | HOLDING FIXTURE | 1 | |
| 600290T (3 ITEMS) | RESTRAINER AND HOLDING FIXTURE | 1 | |
| 61386-T200 | HOLDING FIXTURE | 1 | |
| 6202FE104 | HOLDING TOOL FOR FE104 | 1 | |
| 62201-T200 | HOLDING FIXTURE | 2 | |
| 62201T200 | Holding Fixture | 2 | |
| 62599-T200 | HOLDING FIXTURE | 1 | |
| 62696-T200 | HOLDING FIXTURE | 1 | |
| 63036T201 | HOLDING FIXTURE | 1 | |
| 63041017-1 | SHOCK STRUT HOLDING FIXTURE | 1 | |
| 634-2835-001 | CAPSTAN HOLDING FIXTURE | 1 | |
| 65012T1 | HOLDING FIXTURE | 1 | |
| 65169AF1 | HOLDING FIXTURE | 1 | |
| 6549970-25 | HOLDING FIXTURE (7 IT) | 1 | |
| 65572-T2 | HOLDING FIXTURE | 2 | |
| 65572T2 | HOLDING FIXTURE | 2 | |
| 65572T2A | Holding Fixture | 1 | |
| 65596T200 | Holding Fixture and Cold forming Tools | 1 | |
| 65599T1 | HOLDING FIXTURE | 1 | |
| 65662T200 | HOLDING FIXTURE | 1 | |
| 65885T2 | HOLDING FIXTURE | 1 | |
| 65885T3 | HOLDING FIXTURE | 1 | |
| 65B8562-HF | HOLDING FIXTURE (5 IT) | 1 | |
| 66463T1 | HOLDING FIXTURE | 1 | |
| 67587T4 | HOLDING FIXTURE | 1 | |
| 6795966-100 | FIXTURE, HOLDING, COM | 1 | |
| 71776 | COMPRESSOR ROTOR HOLDING FIXTURE | 1 | |
| 74609 | HOLDING FRAME | 1 | |
| 77361 | HOLDING FIXTURE | 1 | |
| 687005 | HOLDING FIXTURE, VALVE END | 1 | |
| 709082 | HOLDING PLATE FOR VICE | 1 | |
| 728285 | TEST HOLDING FIXTURE | 1 | |
| 739171 | HOLDING FIXTURE | 2 | |
| 6723085 | HOLDING FIXTURE | 1 | |
| 6795922 | Fixture - Holding | 1 | |
| 6795924 | Fixture - Holding | 1 | |
| 6795925 | Fixture - Holding | 1 | |
| 6795926 | Fixture Holding | 1 | |
| 6795927 | Fixture - Holding | 1 | |
| 6796135 | Holding Fixture | 1 | |
| 6796263 | Holding Fixture | 1 | |
| 6796338 | HOLDING FIXTURE - PROP SHAFT | 1 | |
| 6796359 | ADAPTER - HOLDING, NO. 60 PROPELLER SHAFT | 4 | |
| 6796439 | PROP BRAKE FACING GROOVING HOLDING FIXTURE | 1 | |
| 6796545 | Fixture Holding | 1 | |
| 6796598 | FIXTURE - HOLDING | 1 | |
| 6796610 | Combustion Liner Holding Fixture | 2 | |
| 6796621 | FIXTURE - HOLDING, TURBINE COUPLING SHAFT | 2 | |
| 6796667 | Holding Fixture Compressor Housing Assy Grit Blast | 2 | |
| 6796698 | FIXTURE -HOLDING, FUEL CONTROL | 2 | |
| 6796795 | FIXTURE, HOLDING, COMBUSTION LINER ASSEMBLY | 1 | |
| 6796977 | FIXTURE - HOLDING | 1 | |
| 6797099 | Holding Fixture | 1 | |
| 6797173 | HOLDING FIXTURE - TURB COUPLING SHAFT | 1 | |
| 6797236 | ADAPTER, HOLDING, #60 PROPELLER SHAFT | 1 | |
| 6797670 | FIXTURE,HOLDING,COMPRESSOR ROTOR HOUSING | 1 | |
| 6798239 | Fixture â Holding, Tach Drive Idler Gear | 2 | |
| 6798783 | FIXTURE-HOLDING, INNER & INTERM. MEMBER | 1 | |
| 6799698 | FIXTURE, HOLDING, TURBINE ROTOR | 1 | |
| 68421T1 | HOLDING FIXTURE | 1 | |
| 68506-050-1 | HOLDING FIXTURE - THOMSON-CSF | 1 | |
| 68506-078-1 | HOLDING FIXTURE | 1 | |
| 68506-109-1 | HOLDING FIXTURE | 1 | |
| 68506-110-1 | HOLDING FIXTURE | 1 | |
| 68600-253-1 | HOLDING FIXTURE | 1 | |
| 68614T1 | HOLDING FIXTURE (PARKER HANNIFIN CORPORATION) | 1 | |
| 6872416 | FIXTURE - HOLDING | 1 | |
| 6872499 | FIXTURE - HOLDING | 1 | |
| 6872596 | FIXTURE - HOLDING, TURB AND EXHAUST COLL SUP ASSY | 1 | |
| 6872937 | FIXTURE - HOLDING | 1 | |
| 6872938 | FIXTURE - HOLDING 2ND STAGE | 1 | |
| 6872939 | FITURE - HOLDING 3RD STAGE | 1 | |
| 6872940 | FIXTURE - HOLDING 4TH STAGE | 1 | |
| 6872941 | FIXTURE - HOLDING SERIES 2 4TH STAGE | 1 | |
| 6872943 | FIXTURE - HOLDING, SERIES 2 3RD STAGE | 1 | |
| 6872946 | FIXTURE - HOLDING | 1 | |
| 6872947 | FIXTURE - HOLDING 1ST STAGE | 1 | |
| 6872948 | FIXTURE----HOLDING, SERIES II 3RD STAGE NOZZLE SHOT PEENING | 1 | |
| 6872984 | FIXTURE - HOLDING, COMPRESSOR REAR | 1 | |
| 6874005 | HOLDING FIXTURE, CHECK VALVE PLUG | 1 | |
| 6877005 | HOLDING FIXTURE VALVE END | 1 | |
| 6877006 | HOLDING FIXTURE CHECK VALVE PLUG | 1 | |
| 6877010 | HOLDING FIXTURE TIP END | 1 | |
| 6877011 | HOLDING FIXTURE FINAL TEST | 1 | |
| 6877012 | HOLDING FIXTURE PRESSURE TEST | 1 | |
| 6877028 | STEM HOLDING FIXTURE | 1 | |
| 6877114 | Fixture – Holding Fuel Nozzle | 1 | |
| 6889891 | IMPELLER HOLDING FIXTURE | 3 | |
| 6893360 | COMPRESSOR HOLDING FIXTURE | 2 | |
| 6897103 | HOLDING FIXTURE TIP SEAL | 1 | |
| 6897875 | FUEL NOZZLE HOLDING FIXTURE | 2 | |
| 6SV-41427 | Holding Fixture | 1 | |
| 6SV-90846 | Holding Fixture | 2 | |
| 6SV-92071 | Holding Fixture | 1 | |
| 6SV41427 | HOLDING FIXTURE | 1 | |
| 6SV90846 | HOLDING FIXTURE | 2 | |
| 6V41427 | HOLDING FIXTURE | 1 | |
| 70001T184 | HOLDING FIXTURE | 1 | |
| 70642593-1 | TK FLANGE HOLDING TOOL (2PC) "A/B" | 1 | |
| 7100-TOOL | FUEL NOZZLE HOLDING FIXTURE | 1 | |
| 711480-HF | HOLDING FIXTURE | 1 | |
| 74194AF1 | RECEIVER ALIGNMENT AND HOLDING FIXTURE | 1 | |
| 74194AT4 | HOLDING FIXTURE | 1 | |
| 7630951 | ELEVATOR HOLDING FIXTURE | 1 | |
| 7637987-17 | A53-142 Douglas DC-9 Probe Holding Fixture and alignment 2024-T3 Clad Aluminum. Figure 1, Sheet 4 | 1 | |
| 77144-T5 | Holding Fixture | 1 | |
| 801308-S58-2 | VALVE HOLDING FIXTURE | 1 | |
| 803213-S58-10 | VALVE HOLDING FIXTURE | 1 | |
| 803213-S58-2 | HOLDING FIXTURE | 1 | |
| 80410235 | 8041-HOLDING DEVICE FOR SPANNERS FO | 1 | |
| 811-00461 | HOLDING FIXTURE, MODEL 2400 | 1 | |
| 81996-13083230 | HOLDING FIXTURE ASSEMBLY (PNVS) | 1 | |
| 833093-1 | TURBINE AND COMPRESSOR HOLDING FIXTURE | 1 | |
| 833128-1 | HOLDING FIXTURE | 1 | |
| 833467-1 | FIXTURE TEST MOTOR HOLDING | 1 | |
| 833474-1 | FIXTURE HOLDING TURBINE | 1 | |
| 833539-1 | TURBINE HOLDING FIXTURE | 1 | |
| 833855-1 | Torque and Holding Fixture | 1 | |
| 833858-1 | Holding Press Fixture | 1 | |
| 834268-1 | Holding Fixture | 1 | |
| 834384-1 | VALVE ASSEMBLY HOLDING FIXTURE (HOLDING TOOL) | 1 | |
| 834417-1 | Holding Fixture | 1 | |
| 834417-1PM | HOLDING FIXTURE | 1 | |
| 834448-1 | STOP HOLDING FIXTURE | 1 | |
| 834506-1 | DIAPHRAGM HOLDING FIXTURE (4 IT) | 1 | |
| 834709-1 | FIXTURE, HOLDING, TI | 1 | |
| 834709-2 | HOLDING FIXTURE | 1 | |
| 834709-3 | FIXTURE, HOLDING, TI | 1 | |
| 834709-4 | FIXTURE HOLDING | 1 | |
| 834864-1 | DRIVEN COMPRESSOR COUPLING SHAFT HOLDING FIXTURE | 1 | |
| 835360-1 | Holding Fixture | 1 | |
| 835854-1 | Holding Fixture | 1 | |
| 835873-1 | Holding Fixture | 1 | |
| 83820100 | SCREWSHAFT HOLDING ADAPTOR | 1 | |
| 83820102 | SCREWSHAFT HOLDING ADAPTOR | 1 | |
| 852D102/05 | HOLDING FIXTURE BACKLASH | 1 | |
| 8563488G01 | FIXT., HOLDING SECTOR SUPPORT | 1 | |
| 856A 2826G03 | FIXTURE HOLDING NO.4 BEARING | 2 | |
| 856A 3358G03 | FIXTURE HOLDING NO.4BEARINGINNER RACE BOLT | 3 | |
| 856A1035 | FIXTURE, HOLDING - NO. 3 BEARING IGB RETAINER NUT | 1 | |
| 856A1035 G01 | Fixture Holding ‐ No. 3 Brg IGB Retainer Nut | 9 | |
| 856A1035G01 | Holding Fixture | 9 | |
| 856A1047 | FIXTURE, HOLDING - IGB MODULE (HOLDING FIXTURE) | 1 | |
| 856A1047G02 | Holding Fixture | 1 | |
| 856A1047G03 | FIXTURE HOLDING | 3 | |
| 856A1092 | HOLDING FIXTURE | 1 | |
| 856A1092P01 | Holding Fixture | 1 | |
| 856A1199 | HOLDING FIXTURE - HPCR/HPTR BOLTS | 1 | |
| 856A1199P01 | HOLDING FIXTURE - HPCR/HPTR BOLTS | 11 | |
| 856A1430 | FIXTURE, HOLDING - IGB MODULE (HOLDING FIXTURE) | 1 | |
| 856A1430G02 | Fixture, Holding - IGB Module (holding fixture) | 7 | |
| 856A1451P01 | FIXTURE HOLDING SEAL | 1 | |
| 856A1845G02 | FIXTURE, HOLDING - VANE SECTOR | 4 | |
| 856A1845G03 | FIXTURE, HOLDING - VANE SECTOR | 6 | |
| 856A2377G01 | FIXTURE, CENTERING AND HOLDING - ROTATING SEALS(CENTERING AND HOLDING FIXTURE) | 1 | |
| 856A2543G02 | LPT SHAFT HOLDING FIXTURE | 8 | |
| 856A2607G01 | HOLDING FIXTURE | 4 | |
| 856A2618 | FIXTURE- HOLDING/ROTOR/STATOR | 1 | |
| 856A2618 REV C | FIXTURE- HOLDING/ROTOR/STATOR | 1 | |
| 856A2618G01 | FIXTURE HOLDING-ROTOR | 5 | |
| 856A2618G02 | Holding Fixture | 2 | |
| 856A2618G03 | FIXTURE, HOLDING | 3 | |
| 856A2618G04 | FIXTURE, HOLDING ROTOR/STATOR | 11 | |
| 856A2644 | TOOL, HOLDING - FAN DISK (HOLDING TOOL) | 1 | |
| 856A2644 G02 | TOOL, HOLDING - FAN DISK | 3 | |
| 856A2644G01 | FAN DISK HOLDING TOOL | 1 | |
| 856A2644G02 | FAN DISK HOLDING TOOL | 3 | |
| 856A2644G03 | Tool, Holding - Fan Disk (holding tool) | 11 | |
| 856A2660G11 | HOLDING FIXTURE - ROTOR/STATOR, LPT | 5 | |
| 856A2693G03 | HOLDING FIXTURE - N°4 BEARING INNER | 1 | |
| 856A2826 | HOLDING FIXTURE NO.4 BEARING | 1 | |
| 856A2826G01 | FIXTURE, HOLDING - NO. 4 BEARING INNER RACE BOLTS (HOLDING FIXTURE) | 1 | |
| 856A2826G02 | HOLDING FIXTURE - N°4 BEARING INNER | 1 | |
| 856A2826G03 | HOLDING FIXTURE - N4 BEARING INNER | 2 | |
| 856A2942G02 | FIXTURE SETTING AND HOLDING | 1 | |
| 856A2956G01 | HOLDING RING - FAN RETAINING RING | 16 | |
| 856A3287 | FIXTURE, HOLDING - ROTATING AIR SEAL, BOLT HEADS (HOLDING FIXTURE) | 1 | |
| 856A3287G01 | Holding Fixture | 1 | |
| 856A3287G02 | Fixture Holding | 3 | |
| 856A3358 | Fixture Holding Bolts No4 BRG Inner Race | 1 | |
| 856A3358G02 | Holding Fixture | 1 | |
| 856A3358G03 | Holding Fixture | 3 | |
| 856A3358G04 | Fixture holding bolts No 4 brg inner race | 2 | |
| 856A3358G05 | HOLDING FIXTURE – N°4 BRG INNER RACE BOLTS | 4 | |
| 856A3488 | HOLDING SECTORS SET - LPT SHAFT | 1 | |
| 856A3488G01 | HOLDING SECTORS SET - LPT SHAFT | 5 | |
| 856A3552G01 | FIXTURE, HOLDING - RADIAL DRIVE SHAFT | 7 | |
| 856A3794G01 | RING, HOLDING 2EACH(TO HOLD THE STAGE 1 OUTER STATIONARY AIR SEAL AND SHROUD SUPPORT ASSEMBLY DURING TRANSPORTATION OF THE LPT) | 9 | |
| 856A4026 | FIXTURE, HOLDING NO.3 BRG FWD STATIONA | 1 | |
| 856A4026G02 | FIXTURE HOLDING NO 3 | 1 | |
| 856A4027 | FIXT HOLDING BRG AFT OILSEAL | 1 | |
| 856A4027G01 | Holding Fixture | 1 | |
| 856A4028G01 | Holding Fixture | 1 | |
| 856A4706G01 | FIXTURE, HOLDING -FAN BLADE | 1 | |
| 856A4706G02 | FIXTURE, HOLDING -FAN BLADE | 1 | |
| 856A5556G01 | STAGE 1-4 LPT BLADE TWIST ANGLE CHECK (CONF.2 AND 3) (HOLDING FIXTURE) | 1 | |
| 856A5556G02 | FIXTURE HOLDING TWIST ANGLE CHECK LPT BLADES STAGE 1-4 | 3 | |
| 856A5657G01 | HOLDING FIXTURE - LPT NOZZLE STG 2 | 1 | |
| 856A5658G01 | HOLDING FIXTURE - LPT NOZZLE STG 3 | 1 | |
| 856A5659G01 | HOLDING FIXTURE - LPT NOZZLE STG 4 | 1 | |
| 856A5671G01 | HOLDING & GRINDING MATING FACE | 1 | |
| 856A5678 G01 | Holding Fixture Stg 2 Outer | 1 | |
| 856A5678G01 | Tool Set holding Fixture | 1 | |
| 856A5679 G01 | Holding Fixture Stg 3 Outer | 1 | |
| 856A5679G01 | Tool Set holding Fixture | 1 | |
| 856A5917G01 | FIXT, HOLDING AIR COOLING | 1 | |
| 856A5947G01 | FIXTURE, HOLDING –FAN BLADE | 1 | |
| 856A5947G02 | FIXTURE, HOLDING -FAN BLADE | 1 | |
| 856A6753G01 | FIXTURE HOLDING A/C | 1 | |
| 856A6790G01 | FIXTURE HOLDING GRIND | 1 | |
| 856A6794G01 | HOLDING FIXTURE | 1 | |
| 856A6795G01 | Tool Set Holding Fixture-Lpt Stg 2 Outer Shroud Edm And Brazing Lock | 1 | |
| 856A6796G01 | Tool Set Holding Fixture-Lpt Stg 3 Outer Shroud Edm And Brazing Lock | 1 | |
| 856A6797G01 | Tool Set Holding Fixture-Lpt Stg 4 Outer Shroud Edm And Brazing Lock | 1 | |
| 856AI035 | FIXT HOLDING NO3 BRG IGB NUT | 1 | |
| 856А2618 | FIXTURE, HOLDING - ROTOR/STATOR, LPT | 1 | |
| 856А2618G04 | FIXTURE, HOLDING - ROTOR/STATOR, LPT | 1 | |
| 861CAB-0001A-HF | HOLDING FIXTURE | 1 | |
| 900209 | Mitutoyo 900209 Holding Bar for Test Indicator (Length 100mm) | 1 | |
| 906078 | STAMP WITH HOLDING FIXTURE | 1 | |
| 906079 | STAMP WITH HOLDING FIXTURE | 1 | |
| 906080 | MEASURING DEVICE WITH HOLDING FIXTURE | 1 | |
| 9025031 | FULLFRAME HOLDING SET OF 4 | 1 | |
| 8814731000 | HOLDING FIXTURE | 1 | |
| 8817431000 | HOLDING FIXTURE | 1 | |
| 8819105000 | HOLDING FIXTURE | 1 | |
| 882700AF2 | HOLDING FIXTURE | 1 | |
| 89-117-2 | TRANSMITTER HOLDING FIXTURE | 1 | |
| 8C2175 | FIXTURE, HOLDING - STG 7 HPCS BOLT | 1 | |
| 8C2185 | FIXTURE, HOLDING – STG 1 VSV RING | 1 | |
| 8C2728G01 | Fixture,holding-hpt case assy/removal stg 2 hpt hanger | 1 | |
| 8C3300 | FIXTURE, HOLDING - VBV DOOR | 1 | |
| 902F027-1 | ROTOR HOLDING FIXTURE | 1 | |
| 918216-1-1 | Shaft Holding Tool | 1 | |
| 92700-10339-041 | HOLDING FIXTURE, SWASHPLATE TRUNNION | 1 | |
| 933A751-1 | HOLDING FIXTURE | 1 | |
| 953638 | Mitutoyo 953638 Holding Bar for Swivel Clamp (Metric) | 1 | |
| 953639 | Mitutoyo 953639 Holding Bar for Swivel Clamp (Inch) | 1 | |
| 956A6411G01 | Fixture,lifting/holding-lpt,case tool | 1 | |
| 956A6436 | FIXTURE - HOLDING - LPT NOZZLE | 1 | |
| 956A6436G01 | Fixture，holding-LPT nozzle | 1 | |
| 956A6465 | FIXTURE - HOLDING - LPT CASE MISE AU ROND | 1 | |
| 956A8404 | FIXTURE - HOLDING RING - LPT CASE | 1 | |
| 956A8404G01 | Fixture,holding ring -lpt case bride de mise au rond carter turbine bp | 1 | |
| 956A8404G02 | Fixture,holding ring-lpt case bride de mise au rond carter turbine bp | 1 | |
| 956A8547 | FIXTURE - HOLDING - BRACKETS - OIL DRAIN | 1 | |
| 956A8547G01 | Fixture，holding-brackets，oil drain outillage maintien drain 6H | 1 | |
| 95CD0004 | ENGINE HOLDING FIXTURES | 1 | |
| 96SPL-12757-D-0054 | UPPER AND LOWER PISTON HOLDING FIXTURE | 1 | |
| 974B0000-01-TA | TEST HOLDING FIXTURE (6 IT) | 1 | |
| 98A08001005000 | Set-holding measuring cord dispositif p0Ur | 5 | |
| 98A08001005001 | Set-holding measuring cord dispositif p0Ur | 2 | |
| 98A08001005002 | Set-holding measuring cord dispositif p0Ur | 1 | |
| 98A32203004000 | HOLDING FIXTURE | 2 | |
| 98D27403000000 | HOLDING TOOL-TRIM CTL LOWER SHAFT | 10 | |
| 98D47103500000 | HOLDING FIXTURE | 9 | |
| 98D52003006000 | HOLDING HOLDIND-REPLACE FITTING HINGE | 1 | |
| 98D52103001000 | Holding rods-door No1 frame | 1 | |
| 98F71203001102 | WRENCH HOLDING WRENCH CFM | 1 | |
| 98V27309004000 | FIXTURE, HOLDING -ELEVATOR ACTUATORS | 4 | |
| 98V32201011000 | DOOR AFT DOOR HOLDING TOOL | 1 | |
| 990439 | Holding Fixture | 1 | |
| 9970-957-395 | HOLDING FIXTURE | 1 | |
| 9R7257 | FIXTURE, HOLDING ABRADABLE GRIND | 1 | |
| 9R7257G06 | FIXTURE HOLDING ABRADABLE GRIND | 1 | |
| A-C142391-1/02 | HOLDING FIXTURE | 1 | |
| A11006 | HOLDING FIXTURE | 3 | |
| A143751-1-105 | HOLDING FIXTURE | 1 | |
| A16488 | HOLDING FIXTURE | 1 | |
| A2367 | MOTOR ASSEMBLY HOLDING FIXTURE | 1 | |
| A27046-24 | HOLDING FIXTURE | 1 | |
| A27054-14 | FIXTURE HOLDING GEAR, LE SLAT DRIVE | 1 | |
| A27119-1 | HOLDING FIXTURE EQUIPMENT - GEAR ASSEMBLY, LE SLAT DRIVE | 1 | |
| A27126-1 | HOLDING FIXTURE - INPUT ROD ASSEMBLY, ELEVATOR POWER CONTROL UNIT (PCU) | 3 | |
| A27126-1 | Holding Fixture (2IT) | 3 | |
| A300-27-81-00 | TOOL-HOLDING,SLAT DRIVE SHAFT, CTR WING BOX | 1 | |
| A32058-1 | HOLDING FIXTURE - ACTUATOR LOCK, NOSE LANDING GEAR (NLG) | 1 | |
| A32084-1 | HOLDING FIXTURE - PISTON ROD, NOSE LANDING GEAR (NLG) LOCK ACTUATOR | 1 | |
| A32087-1 | FIXTURE - HOLDING, MAIN LANDING GEAR RETRACT ACTUA | 1 | |
| A32087-12 | FIXTURE - HOLDING, MAIN LANDING GEAR RETRACT ACTUATOR | 1 | |
| A54013-1 | HOLDING FIXTURE - DIAGONAL BRACE | 1 | |
| A646287 | HOLDING FIXTURE | 1 | |
| A78021-7 | HOLDING FIXTURE - PISTON (A78021-7 INCLUDED IN A78021-45 AND A78021-46) | 1 | |
| AC143620-2-02 | HOLDING FIXTURE | 1 | |
| AD-1319 | HOLDING FIXTURE | 1 | |
| AD1319-9 | HOLDING FIXTURE | 2 | |
| AE5420 | FIXTURE HOLDING GENERATOR | 1 | |
| AE5459 | FIXTURE HOLDING | 1 | |
| AE6604 | HOLDING FIXTURE | 1 | |
| AF-SPO-6450/5719 | CUSTOM NORTEC SPO-6450 STYLE MANUAL BOLT HOLE PROBE 500KHz-2MHz with SPO-5719 STYLE HOLDING FIXTURE W/ 1/16" PER rEVOLUTION THREAD. | 1 | |
| AFDS-37425 | Holding Fixture | 1 | |
| AFNDT-1096/304SS | 9 STEP REFERENCE BLOCK WITH ACETAL(DELRIN) HOLDING BLOCK. MATERIAL: 304 STAINLESS STEEL. STEP SIZES: .020",.050",.080", .120", .160" , .200", .300", .500", .750" +/-.010". PAD SIZE = 1.0" x 1.0". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1096/625 | 9 STEP REFERENCE BLOCK WITH ACETAL(DELRIN) HOLDING BLOCK. MATERIAL: 625 INCONEL. STEP SIZES: .020",.050",.080", .120", .160" , .200", .300", .500", .750" +/-.010". PAD SIZE = 1.0" x 1.0". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1096/718 | 9 STEP REFERENCE BLOCK WITH ACETAL(DELRIN) HOLDING BLOCK. MATERIAL: 625 INCONEL. STEP SIZES: .020",.050",.080", .120", .160" , .200", .300", .500", .750" +/-.010". PAD SIZE = 1.0" x 1.0". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2009AL | 5 STEP WEDGE, 16mm, 17mm, 18mm, 19mm, 20mm, +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm square. Includes Delrin Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2037/7075T6 | 10 STEP WEDGE SUPPLIED WITH HOLDING BLOCK. STEP SIZES: .040", .080", .120", .160", .200", .240", .280", .320", .360", .400" +/-.001". Material: 7075-T6 ALUMINUM. PAD SIZE: .75" x .75". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2075/1018 | 5 STEP WEDGE .020", .040", .060", .080", .100". TOLERANCE +/-.001". MATERIAL: 4340 or 4130 CARBON STEEL . PAD SIZE:75"x.75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2075/AL-1 | 5 STEP WEDGE .020", .040", .060", .080", .100". TOLERANCE +/-.001". MATERIAL: 7075-T6 ALUMINUM .PAD SIZE: 75" x .75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2075/AL-2 | 5 STEP WEDGE .020", .040", .060", .080", .100". TOLERANCE +/-.001". MATERIAL: 2024-T3 ALUMINUM .PAD SIZE: 75" x .75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2075/INC | 5 STEP WEDGE .020", .040", .060", .080", .100". TOLERANCE +/-.001". MATERIAL: 718 INCONEL. PAD SIZE: 75" x .75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2075/TI | 5 STEP WEDGE .020", .040", .060", .080", .100". TOLERANCE +/-.001". MATERIAL: 6AL-4V TITANIUM . PAD SIZE: 75" x .75" .Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2075CS | 5 STEP WEDGE .020", .040", .060", .080", .100". TOLERANCE +/-.001". MATERIAL: 4340 CARBON STEEL . PAD SIZE:75"x.75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2075SS | 5 STEP WEDGE .020", .040", .060", .080", .100". TOLERANCE +/-.001". MATERIAL: 304 STAINLESS. PAD SIZE: 75" x .75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2090AL | 5 STEP WEDGE, 11mm, 12mm, 13mm, 14mm, 15mm, +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm square. Includes Delrin Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2119AL | 5 STEP WEDGE, 11mm, 12mm, 13mm, 14mm, 15mm, +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm square. Includes Delrin Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3013AL-1 | Metric 6 Step Wedge, 0.5mm, 1mm, 2mm, 3mm, 4mm, 5mm, +/- .05mm. Material: 2024-T3 Aluminum Supplied with Delrin Holding Block. Pad Size: 19mm x 19mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3045-2024T3 | 10 STEP REFERENCE BLOCK .010", .020", .030", .040", .050", .060", .070", .080", .090", .100", +/-.001" . Material: 7075-T6 ALUMINUM, Pad Size: .75" x 75" with Acetal( Delrin) holding block . Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3045-7075T6 | 10 STEP REFERENCE BLOCK .010", .020", .030", .040", .050", .060", .070", .080", .090", .100", +/-.001" . Material: 7075-T6 ALUMINUM, Pad Size: .75" x 75" with Acetal( Delrin) holding block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3045/1018 | 10 STEP REFERENCE BLOCK, Step Pad Thicknesses: .010", .020", .030", .040", .050", .060", .070", .080", .090", .100", +/-.001" . Material: 1018 Steel, Pad Size: .75" x 75" with Acetal( Delrin) holding block. Includes Test Report and Certificate of Confo | 1 | |
| AFNDT-3063/13-8PH | 5 STEP CALIBRATION BLOCK, INCLUDES ACETAL(DELRIN) HOLDING BLOCK. PAD SIZE 1.0" x1.0", STEP SIZE: .020", .040", .060", .080", .100", .150, .200, .300 +/- .010" 13-8PH STAINLESS STEEL. Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-3063/15-5PH | 8 STEP CALIBRATION BLOCK, INCLUDES ACETAL(DELRIN) HOLDING BLOCK. PAD SIZE 1.0" x1.0", STEP SIZE: .020", .040", .060", .080", .100", .150, .200, .300 +/- .010" 15-5PH STAINLESS STEEL. Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-3063/17-4PH | 8 STEP CALIBRATION BLOCK, INCLUDES ACETAL(DELRIN) HOLDING BLOCK. PAD SIZE 1.0" x1.0", STEP SIZE: .020", .040", .060", .080", .100", .150, .200, .300 +/- .010" 17-4PH STAINLESS STEEL. Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-3064/2024AL | 7 STEP REFERENCE BLOCK WITH ACETAL( DELRIN ) HOLDING BLOCK. STEP PAD SIZE: 1.0" X 1.0". MATERIAL: 2024-T3 ALUMINUM. STEP RANGE:.020", .040", .060", .080", .100", .150", .200" +/- .002". Includes certification report traceable to NIST. | 1 | |
| AFNDT-3064/6061AL | 7 STEP REFERENCE BLOCK WITH ACETAL( DELRIN ) HOLDING BLOCK. STEP PAD SIZE: 1.0" X 1.0". MATERIAL: 6061-T6 ALUMINUM. STEP RANGE:.020", .040", .060", .080", .100", .150", .200" +/- .002". Includes certification report traceable to NIST. | 1 | |
| AFNDT-3064/7075AL | 7 STEP REFERENCE BLOCK WITH ACETAL( DELRIN ) HOLDING BLOCK. STEP PAD SIZE: 1.0" X 1.0". MATERIAL: 7075-T6 ALUMINUM. STEP RANGE:.020", .040", .060", .080", .100", .150", .200" +/- .002". Includes certification report traceable to NIST. | 1 | |
| AFNDT-3067/15-5PH | 8 STEP CALIBRATION BLOCK, INCLUDES ACETAL(DELRIN) HOLDING BLOCK. PAD SIZE 1.0" x1.0", STEP SIZE: .015", .030", .050", .080", .120", .160, .200, .300 +/- .005" Material: 15-5PH STEEL. Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-3067/6AL4V | 8 STEP CALIBRATION BLOCK, INCLUDES ACETAL(DELRIN) HOLDING BLOCK. PAD SIZE 1.0" x1.0", STEP SIZE: .015", .030", .050", .080", .120", .160, .200, .300 +/- .005" 15-5PH STAINLESS STEEL. Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-3068/4130 | 7 STEP REFERENCE BLOCK WITH ACETAL( DELRIN ) HOLDING BLOCK. STEP PAD SIZE: 1.0" X 1.0". MATERIAL: 4130 STEEL. STEP RANGE:.020", .050", .080", .120", .160", .200", .300" +/- .010". Includes certification report traceable to NIST. | 1 | |
| AFNDT-3192AL | 10 STEP REFERENCE BLOCK .020", .040", .060", .080", .100", .120", .140", .160", .180", .200" +/-.001" 7075-T6 ALUMINUM .75" x .75" STEP PAD With Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3193AL | 10 STEP REFERENCE BLOCK .020", .040", .060", .080", .100", .120", .140", .160", .180", .200" +/-.001" 2024-T3 ALUMINUM .75" x .75" STEP PAD With Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3194TI | 10 STEP REFERENCE BLOCK .020", .040", .060", .080", .100", .120", .140", .160", .180", .200" +/-.001" 6AL-4V TITANIUM .75" x .75" STEP PAD With Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3195S | 10 STEP REFERENCE BLOCK .020", .040", .060", .080", .100", .120", .140", .160", .180", .200" +/-.001" CARBON STEEL .75" x .75" STEP PAD With Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3207CS | 5 Step Block. Material: 1018 Steel. Steps: 0.45mm, 0.50mm, 1.0mm, 2.5mm, 5.0mm. Tolerance: ± 0.02mm. Pad Size: 15.0mm x 15.0mm. Tolerance: ± 0.5mm. Surface Finish: Ra 0.8 µm (32 µin.) max. Supplied with Delrin Holding Block. Includes Test Report and Certi | 1 | |
| AFNDT-3243AL | 8 STEP WEDGE, 2mm, 4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm +/- .05mm. Material: 2024-T3 Aluminum. Pad Size: 19mm x 19mm square. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3244AL | 8 STEP WEDGE, 2mm, 4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 19mm x 19mm square. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3245AL | 8 STEP WEDGE, 14mm, 16mm, 18mm, 20mm, 22mm, 24mm, 26mm, 28mm +/- .05mm. Material: 2024-T3 Aluminum. Pad Size: 19mm x 19mm square. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3246AL | 8 STEP WEDGE, 14mm, 16mm, 18mm, 20mm, 22mm, 24mm, 26mm, 28mm +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 19mm x 19mm square. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3252AL | 9 STEP THICKNESS STANDARD. STEP SIZES: .015", .025", .035", .045", .055", .065", .075", .085", .095" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 7075-T6 ALUMINUM.Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certifica | 1 | |
| AFNDT-3252CS | 9 STEP THICKNESS STANDARD. STEP SIZES: .015", .025", .035", .045", .055", .065", .075", .085", .095" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 4340 or 4130 Carbon Steel.Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and | 1 | |
| AFNDT-3252TI | 9 STEP THICKNESS STANDARD. STEP SIZES: .015", .025", .035", .045", .055", .065", .075", .085", .095" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 6AL-4V TITANIUM. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certifica | 1 | |
| AFNDT-3253AL | 9 STEP WEDGE, 0.38mm, 0.64mm, 0.89mm, 1.14mm, 1.40mm, 1.65mm, 1.91mm, 2.16mm, 2.41mm +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 19mm x 19mm square. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certificate of Confo | 1 | |
| AFNDT-3253CS | 9 STEP WEDGE, 0.38mm, 0.64mm, 0.89mm, 1.14mm, 1.40mm, 1.65mm, 1.91mm, 2.16mm, 2.41mm +/- .05mm. Material: 4340 or 4130 Carbon Steel. Pad Size: 19mm x 19mm square. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certificate | 1 | |
| AFNDT-3253TI | 9 STEP WEDGE, 0.38mm, 0.64mm, 0.89mm, 1.14mm, 1.40mm, 1.65mm, 1.91mm, 2.16mm, 2.41mm +/- .05mm. Material: 6Al-4v Titanium. Pad Size: 19mm x 19mm square. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certificate of Confor | 1 | |
| AFNDT-3289AL | Custom Metric 6 Step Block. Step Thicknesses of 1.0mm, 1.2mm, 1.4mm, and1.6mm. (Tolerance: +/- 0.02mm). Pad Size: 15mm X 15mm, (Tolerance: +/- 0.5mm) Material: 7075-T6 Aluminum with Delrin Holding Block. Includes Certification Report and Certificate | 1 | |
| AFNDT-3293/400 | 6 STEP WEDGE, .025", .050",. 100", .150", .200", 300" MATERIAL: MONEL 400. PAD SIZE: 1.50" X 1.50" TOLEREANCE = +/- .001. Includes Delrin Holding Block and Certification Report. | 1 | |
| AFNDT-3293/625I | 6 STEP WEDGE, .025", .050",. 100", .150", .200", 300" MATERIAL: 625 inconel. PAD SIZE: 1.50" X 1.50" TOLEREANCE = +/- .001. Includes Delrin Holding Block and Certification Report. | 1 | |
| AFNDT-3293/718I | 6 STEP WEDGE, .025", .050",. 100", .150", .200", 300" MATERIAL: 718 inconel. PAD SIZE: 1.50" X 1.50" TOLEREANCE = +/- .001. Includes Delrin Holding Block and Certification Report. | 1 | |
| AFNDT-3294/718I | 6 STEP WEDGE, .050", .100", .150", .200", .250", 300" MATERIAL: 718 inconel. PAD SIZE: 1.50" X 1.50" TOLEREANCE = +/- .001. Includes Delrin Holding Block and Certification Report. | 1 | |
| AFNDT-3336/600 | 4 STEP WEDGE .040, .060, .080, .100 +/-.001 INCONEL 600 . PAD SIZE:75" x .75" SUPPLIED WITH DELRIN HOLDING BLOCK. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3337AL | 5 STEP WEDGE .020", .030", .040", .050", .060". TOLERANCE +/-.001". MATERIAL: 7075-T6 ALUMINUM .PAD SIZE: 75" x .75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3341AL | 9 STEP REFERENCE BLOCK WITH ACETAL(DELRIN) HOLDING BLOCK. MATERIAL: 7075-T6 ALUMINUM. STEP SIZES: .030",.050",.080", .120", .160" , .200", .300", .400", .500" +/-.001". PAD SIZE = .75" x .75". Supplied with Delrin(Acetal) Holding Block. Includes Test Repo | 1 | |
| AFNDT-3341CS | 9 STEP REFERENCE BLOCK WITH ACETAL(DELRIN) HOLDING BLOCK. MATERIAL: 4340 STEEL. STEP SIZES: .030",.050",.080", .120", .160" , .200", .300", .400", .500" +/-.001". PAD SIZE = 1.0" x 1.0". Supplied with Delrin(Acetal) Holding Block. Includes Test Report and | 1 | |
| AFNDT-3341INC | 9 STEP REFERENCE BLOCK WITH ACETAL(DELRIN) HOLDING BLOCK. MATERIAL: 718 INCONEL. STEP SIZES: .030",.050",.080", .120", .160" , .200", .300", .400", .500" +/-.001". PAD SIZE = .75" x .75". Supplied with Delrin(Acetal) Holding Block. Includes Test Report an | 1 | |
| AFNDT-3341SS | 9 STEP REFERENCE BLOCK WITH ACETAL(DELRIN) HOLDING BLOCK. MATERIAL: 304 STAINLESS STEEL. STEP SIZES: .030",.050",.080", .120", .160" , .200", .300", .400", .500" +/-.001". PAD SIZE = 1.0" x 1.0". Supplied with Delrin(Acetal) Holding Block. Includes Test R | 1 | |
| AFNDT-3341TI | 9 STEP REFERENCE BLOCK WITH ACETAL(DELRIN) HOLDING BLOCK. MATERIAL: 6AL-4V TITANIUM. STEP SIZES: .030",.050",.080", .120", .160" , .200", .300", .400", .500" +/-.001". PAD SIZE = .75" x .75". Supplied with Delrin(Acetal) Holding Block. Includes Test Repor | 1 | |
| AFNDT-3343/2024T3 | 6 STEP WEDGE .010", .030", .050", .070", .090", .125" +/-.001", 2024-T3 ALUMINUM 0.75" x 0.75" STEP PAD. SUPPLIED WITH HOLDING BLOCK. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3343/7075T6 | 6 STEP WEDGE .010", .030", .050", .070", .090", .125" +/-.001", 7075-T6 ALUMINUM 0.75" x 0.75" STEP PAD. SUPPLIED WITH HOLDING BLOCK. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3345AL | 5 STEP THICKNESS STANDARD. STEP SIZES: .020", .050", .100", .150", .200", +/-.002". MATERIAL: 2024-T3 ALUMINUM. SUPPLIED WITH DELRIN HOLDING BLOCK. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3348/2024T3 | 7 STEP METRIC WEDGE: Step Sizes: 1mm, 3mm, 5mm, 10mm, 15mm, 20mm, 25mm +/- .05mm . Pad Size: 20mm x 20mm. Supplied With Holding Block. Material- 2024-T351 Aluminum (Surface Anodized for Corrosion Protection). Includes Test Report and Certificate of Confor | 1 | |
| AFNDT-3348/4340 | 7 STEP METRIC WEDGE: Step Sizes: 1mm, 3mm, 5mm, 10mm, 15mm, 20mm, 25mm +/- .05mm . Pad Size: 20mm x 20mm. Supplied With Holding Block. Material- 4340 Steel (Nickle Plated for Corrosion Protection). Includes Test Report and Certificate of Conformance. Manu | 1 | |
| AFNDT-3348/7075T6 | 7 STEP METRIC WEDGE: Step Sizes: 1mm, 3mm, 5mm, 10mm, 15mm, 20mm, 25mm +/- .05mm . Pad Size: 20mm x 20mm. Supplied With Holding Block. Material- 7075-T6 Aluminum (Surface Anodized for Corrosion Protection). Includes Test Report and Certificate of Conforma | 1 | |
| AFNDT-3348/TA6V | 7 STEP METRIC WEDGE: Step Sizes: 1mm, 3mm, 5mm, 10mm, 15mm, 20mm, 25mm +/- .05mm . Pad Size: 20mm x 20mm. Supplied With Holding Block. Material- 6AL-4V Titanium. Includes Test Report and Certificate of Conformance. Manufactured in Accordance to ASTM E797 | 1 | |
| AFNDT-3350AL | 5 STEP WEDGE .020", .030", .040", .080", .090". TOLERANCE +/-.001". MATERIAL: 7075-T6 ALUMINUM .PAD SIZE: 75" x .75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3351AL | 8 STEP THICKNESS STANDARD. STEP SIZES: .015", .020", .025", .030", .035", .040", .045", .050" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 2024-T3 Aluminum. Supplied with Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3351AL-1 | 8 STEP THICKNESS STANDARD. STEP SIZES: .015", .020", .025", .030", .035", .040", .045", .050" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 7075-T6 Aluminum. Supplied with Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3351CS | 8 STEP THICKNESS STANDARD. STEP SIZES: .015", .020", .025", .030", .035", .040", .045", .050" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 1018 CARBON STEEL. Supplied with Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3359 | Custom 10 Step Block, supplied with holding block. Step Sizes: 2.5mm, 5.0mm, 7.5mm, 10.0mm, 12.5mm, 15.0mm, 17.5mm, 20.0mm, 22.5mm and 25.0mm, Thickness Tolerance ±.05mm. Pad Size: 20mm X 20mm. Material: Duplex 2205 Stainless Steel. Includes certificatio | 1 | |
| AFNDT-3385/2024T3 | 12 STEP WEDGE, STEP THICKNESS: .024", .040", .060", .080", .100", .150", .200", .300", .400", .500" .650", .800" +/-.001" 2024-T3 ALUMINUM SUPPLIED WITH A DELRIN HOLDING BLOCK. Includes Test Report and Certificate of Conformance | 1 | |
| AFNDT-3385/7075T6 | 12 STEP WEDGE, STEP THICKNESS: .024", .040", .060", .080", .100", .150", .200", .300", .400", .500" .650", .800" +/-.001" 7075-T6 ALUMINUM SUPPLIED WITH A DELRIN HOLDING BLOCK. Includes Test Report and Certificate of Conformance | 1 | |
| AFNDT-3388AL | Custom Metric 7 Step Block. Step Thicknesses: 0.5mm, 2.5mm, 4.5mm, 6.5mm, 8.5mm, 10.5mm & 12.5mm. (Tolerance: +/- 0.02mm). Pad Size: 20mm x 20mm. Material: 2024-T3 ALUMINUM. Supplied with Delrin Holding Block. Includes Certification Report for step thi | 1 | |
| AFNDT-3398AL | 9 STEP THICKNESS STANDARD. STEP SIZES: .020", .030", .040", .050", .060", .070", .080", .090", .100" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 7075-T6 ALUMINUM.Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certifica | 1 | |
| AFNDT-3401AL | 7 STEP WEDGE. STEP SIZES: .040", .050", .060", .070", .080", .090", .100" +/- .001". PAD SIZE: 1.0"x 1.0", MATERIAL: 7075-T6 ALUMINUM SUPPLIED WITH ACETAL(DELRIN) HOLDING BLOCK. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3401CS | 7 STEP WEDGE. STEP SIZES: .040", .050", .060", .070", .080", .090", .100" +/- .001". PAD SIZE: 1.0"x 1.0", MATERIAL: 1018 CARBON STEEL SUPPLIED WITH ACETAL(DELRIN) HOLDING BLOCK. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3404AL | 5 STEP WEDGE .030", .050", .070", .090", .110". TOLERANCE +/-.001". MATERIAL: 7075-T6 ALUMINUM .PAD SIZE: 75" x .75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3406-625 | 6 STEP CALIBRATION BLOCK, STEP SIZES .015", .020", .025", .030", .035", .040". MATERIAL: 625 Inconel. PAD SIZE: 1" X 1" X 6" ± .001". Supplied With Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3406AL | 6 STEP CALIBRATION BLOCK, STEP SIZES .015", .020", .025", .030", .035", .040". MATERIAL: 2024-T3 Aluminum. PAD SIZE: 1" X 1" X 6" ± .001". Supplied With Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3406AL-1 | 6 STEP CALIBRATION BLOCK, STEP SIZES .015", .020", .025", .030", .035" .040". MATERIAL: 7075-T6 Aluminum. PAD SIZE: 1" X 1" X 6" ± .001". Supplied With Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3409AL | 9 STEP WEDGE, 0.5mm, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 19mm x 19mm square Supplied with Acetal(Delrin) Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3409ST | 9 STEP WEDGE, 0.5mm, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .05mm. Material: 4340 Steel. Pad Size: 19mm x 19mm square Supplied with Acetal(Delrin) Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3409TI | 9 STEP WEDGE, 0.5mm, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .05mm. Material: 6AL-4V Titanium. Pad Size: 19mm x 19mm square Supplied with Acetal(Delrin) Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3414-625 | 6 STEP CALIBRATION BLOCK, STEP SIZES .050", .100", .200", .300", .400", .500". MATERIAL: 625 Inconel. PAD SIZE: 1" X 1" X 6" ± .001". Supplied With Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3417/2024T3 | 5 STEP WEDGE,0.25mm, 0.50mm, 0.75mm, 1.00mm, 1.25mm, +/- .02mm. Material: 2024-T3 Aluminum. Pad Size: 20mm x 20mm square Supplied With Acetal(Delrin) Holding Block Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3417/2024T42 | 5 STEP WEDGE,0.25mm, 0.50mm, 0.75mm, 1.00mm, 1.25mm, +/- .02mm. Material: 2024-T42 Aluminum. Pad Size: 20mm x 20mm square Supplied With Acetal(Delrin) Holding Block Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3417/304SS | 5 STEP WEDGE,0.25mm, 0.50mm, 0.75mm, 1.00mm, 1.25mm, +/- .02mm. Material: 304 nStainless Steel. Pad Size: 20mm x 20mm square Supplied With Acetal(Delrin) Holding Block Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3417/7075T6 | 5 STEP WEDGE,0.25mm, 0.50mm, 0.75mm, 1.00mm, 1.25mm, +/- .02mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm square Supplied With Acetal(Delrin) Holding Block Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3417/TI | 5 STEP WEDGE,0.25mm, 0.50mm, 0.75mm, 1.00mm, 1.25mm, +/- .02mm. Material: 6AL-4V Titanium. Pad Size: 20mm x 20mm square Supplied With Acetal(Delrin) Holding Block Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3418/2024T3 | 8 STEP WEDGE, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .02mm. Material: 2024-T3 Aluminum. Pad Size: 20mm x 20mm ±.05mm square Supplied With Acetal( Delrin ) Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3418/2024T42 | 8 STEP WEDGE, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .02mm. Material: 2024-T42 Aluminum. Pad Size: 20mm x 20mm ±.05mm square Supplied With Acetal( Delrin ) Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3418/304SS | 8 STEP WEDGE, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .02mm. Material: 304 Stainless Steel. Pad Size: 20mm x 20mm ±.05mm square Supplied With Acetal( Delrin ) Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3418/7075T6 | 8 STEP WEDGE, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .02mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm ±.05mm square Supplied With Acetal( Delrin ) Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3418/TI | 8 STEP WEDGE, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .02mm. Material: 6AL-4V Titanium. Pad Size: 20mm x 20mm ±.05mm square Supplied With Acetal( Delrin ) Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3432/2050AL | 7 STEP WEDGE .050", .100",. 150", .200", .250", .300", .350". MATERIAL: 2050 ALUMINUM. PAD SIZE: 1.0" x 1.0" TOLEREANCE = +/- .001. Supplied With Delrin Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3432/2195AL | 7 STEP WEDGE .050", .100",. 150", .200", .250", .300", .350". MATERIAL: 2195 ALUMINUM. PAD SIZE: 1.0" x 1.0" TOLEREANCE = +/- .001. Supplied With Delrin Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3432/6061AL | 7 STEP WEDGE .050", .100",. 150", .200", .250", .300", .350". MATERIAL: 6061 ALUMINUM. PAD SIZE: 1.0" x 1.0" TOLEREANCE = +/- .001. Supplied With Delrin Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3441AL | 10 STEP REFERENCE BLOCK SUPPLIED WITH DELRIN HOLDING BLOCK, STEP SIZES: .015", .025", .035", .045", .055", .065", .075", .085", .095",.105". PAD SIZE: 1.0" x 1.0". MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance | 1 | |
| AFNDT-3449/2024AL | 8 STEP WEDGE, STEP SIZES: .030", .040", .050", .060", .070", .080", .090", and .100" +/- .001". PAD SIZE: 1.0" x 1.0" Supplied With Delrin Holding Block. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3449/304SS | 8 STEP WEDGE, STEP SIZES: .030", .040", .050", .060", .070", .080", .090", and .100" +/- .001". PAD SIZE: 1.0" x 1.0" Supplied With Delrin Holding Block. MATERIAL: 304 STAINLESS STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3449/6AL-4V | 8 STEP WEDGE, STEP SIZES: .030", .040", .050", .060", .070", .080", .090", and .100" +/- .001". PAD SIZE: 1.0" x 1.0" Supplied With Delrin Holding Block. MATERIAL: 6AL-4V TITANIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3449/7075AL | 8 STEP WEDGE, STEP SIZES: .030", .040", .050", .060", .070", .080", .090", and .100" +/- .001". PAD SIZE: 1.0" x 1.0" Supplied With Delrin Holding Block. MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3454 | 5 STEP WEDGE .020", .040", .060", .080", .120". MATERIAL: 360 BRASS. PAD SIZE: 75" x .75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3462AL | 10 STEP REFERENCE BLOCK, Step Pad Thicknesses: .010", .020", .040", .060", .080", .100", .150", .200", .250", .300", +/-.001" . Material: Anodized 7075-T6 ALUMINUM, Pad Size: .75" x 75" with Acetal( Delrin) holding block. Includes Test Report and Ce... | 1 | |
| AFNDT-3477AL | METRIC 10 STEP ALUMINUM CALIBRATION BLOCK, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm ± .05mm. Pad Size: 25mm X 25mm. Material: 2024-T3 Aluminum Supplied with a Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3477CS | METRIC 10 STEP CARBON STEEL CALIBRATION BLOCK, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm ± .05mm. Pad Size: 25mm X 25mm. Material: 1018 or 4340 Carbon Steel Supplied with a Delrin Holding Block. Includes Test Report and Certificate of Conform... | 1 | |
| AFNDT-3477TI | METRIC 10 STEP TITANIUM CALIBRATION BLOCK, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm ± .05mm. Pad Size: 25mm X 25mm. Material: 6AL-4V Titanium Supplied with a Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3478TI | 5 STEP WEDGE .024", .040", .060", .080", .100". TOLERANCE +/-.002". ..MATERIAL: 6AL-4V TITANIUM . PAD SIZE: 75" x .75" .Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3479TI | 7 STEP CALIBRATION BLOCK. MATERIAL: 6AL-4V TITANIUM. STEP THICKNESS: 0.024", 0.040", 0.060", 0.800", 0.100", .150" 0.200" +/- .001". STEP PAD SIZE: .75" x .75". Note: The first and last pad is 1.0" long. Supplied With Delrin Holding Block Includes certi | 1 | |
| AFNDT-3482AL | 5 STEP CALIBRATION BLOCK, 7075-T6 ALUMINUM. STEP SIZES: .098", .197", .295", .394", .492" ± .001". PAD SIZE: 1.0" x 1.0". Supplied with Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3482AL-1 | 5 STEP CALIBRATION BLOCK, 7075-T6 ALUMINUM. STEP SIZES: .020", .039", .059", .079", .098" ± .001". PAD SIZE: 1.0" x 1.0". Supplied with Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3486/15-5PH | 8 STEP WEDGE, STEP SIZES: 0.125", 0.150", 0.289", 0.300", 0.350", 0.476", 0.500", 0.650" +/- .001". PAD SIZE: 1.0" x 1.0". MATERIAL: 15-5PH STAINLESS STEEL SUPPLIED WITH DELRIN HOLDING BLOCK. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3487/4130 | 5 STEP WEDGE .050", .100", .200", .400", .500". TOLERANCE +/-.001". MATERIAL: 4130 STEEL SUPPLIED WITH HOLDING BLOCK. PAD SIZE: 1.0" x 1.0" . Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3487/TI | 5 STEP WEDGE .050", .100", .200", .400", .500". TOLERANCE +/-.001". MATERIAL: 6AL-4V TITANIUM SUPPLIED WITH HOLDING BLOCK. PAD SIZE: 1.0" x 1.0" . Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3488/AL | 5 STEP WEDGE .032", .064", .128", .256", .500". TOLERANCE +/-.001". MATERIAL: 7075-T6 ALUMINUM SUPPLIED WITH HOLDING BLOCK. PAD SIZE: 1.0" x 1.0" . Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3489/AL | 9 STEP WEDGE: .010", .020" .032", .040", .050", .064", .128", .256", .500". TOLERANCE +/-.001". MATERIAL: 2024-T3 ALUMINUM SUPPLIED WITH HOLDING BLOCK. PAD SIZE: 1.0" x 1.0" . Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3491AL | METRIC 6 STEP WEDGE. STEP SIZE: 0.6mm, 1mm, 3mm, 7mm, 13mm, 20mm +/- .03mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm square Supplied With Acetal(Delrin) Holding Block Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3496CS | 8 STEP WEDGE, STEP SIZES: .020", .025", .030", .040", .050", .060", .080", and .100" +/- .001". PAD SIZE: .75" x .75" Supplied With Delrin Holding Block. MATERIAL: 4340 Steel . Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3496TI | 8 STEP WEDGE, STEP SIZES: .020", .025", .030", .040", .050", .060", .080", and .100" +/- .001". PAD SIZE: .75" x .75" Supplied With Delrin Holding Block. MATERIAL: 6AL-4V TITANIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3521AL | 5 STEP METRIC WEDGE , 2mm, 4mm, 6mm, 8mm, 10mm, +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 19mm x 19mm square Supplied with Delrin Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3537AL | METRIC 5 STEP WEDGE. STEP SIZES: 0.40mm, 0.65mm, 1.3mm, 2.0mm, 2.5mm STEP TOLERANCE +/-.03mm(.00118"). MATERIAL: 2024-T3 ALUMINUM .PAD SIZE: 25mm x .25mm. Supplied with Delrin Holding Block. Includes Test Report traceable to NIST, Mill Certificate f... | 1 | |
| AFNDT-3542AL | METRIC 5 STEP WEDGE 0.6mm(.024"),5.44mm( .214"),10.26mm( .404"),15.09mm( .594"), 20mm(.787"). TOLERANCE +/-.001". MATERIAL: 7075-T6 ALUMINUM .PAD SIZE: 75" x .75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certif... | 1 | |
| AFNDT-3544/2219-T8 | 10 STEP REFERENCE BLOCK .038, .045, .055, .065, .080, .100, .125, .150", .175", .200", ± .001" Supplied with Delrin Holding Block... Pad Size: .800" x .800" ± 0.010" Material: 2219-T8. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3547CS | 5 STEP WEDGE, .020", .030", .040", .050", .060". TOLERANCE +/-.001". MATERIAL: 4340 Steel . PAD SIZE: .75" x .75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3548/7075 | 5 STEP WEDGE, 1mm, 3mm, 5mm, 7mm, 10mm, +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm square supplied with Delrin Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3558/7075T6 | 10 STEP WEDGE SUPPLIED WITH DELRIN HOLDING BLOCK. STEP SIZES: .020", .040", .60", .80", .100", .120", .140", .160", .180", .200" +/-.001". Material: 7075-T6 ALUMINUM. PAD SIZE: .75" x .75". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3561AL | CUSTOM 3 STEP CALIBRATION BLOCK, 2024-T3 ALUMINUM... STEP PAD SIZE: 25.0mm x 25.0mm. STEP THICKNESSES: 0.3mm, 0.5mm and 0.8mm ± 0.03mm. Supplied with Protective Acetal Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFT6355C0001-01-05 | HOLDING FIXTURE | 1 | |
| AGE 13856 | HOLDING FIXTURE | 1 | |
| AGE 13861 | HOLDING FIXTURE | 1 | |
| AGE 13875 | HOLDING FIXTURE | 1 | |
| AGE-02901-001 | FIXTURE, HOLDING | 1 | |
| AGE-10032 | FIXTURE, HOLDING | 3 | |
| AGE-10040 | HOLDING FIXTURE | 2 | |
| AGE-10043 | FIXTURE, ASSEMBLY HOLDING | 2 | |
| AGE-10048 | FIXTURE, HOLDING | 5 | |
| AGE-10061 | FIXTURE HOLDING | 1 | |
| AGE-10082 | FIXTURE, HOLDING | 2 | |
| AGE-10341 | FIXTURE, HOLDING | 3 | |
| AGE-10346 | HOLDING FIXTURE | 3 | |
| AGE-10371 | FIXTURE, HOLDING | 3 | |
| AGE-10379 | FIXTURE ASSEMBLY, HOLDING | 2 | |
| AGE-10397 | FIXTURE, HOLDING | 3 | |
| AGE-10774 | FIXTURE, HOLDING | 2 | |
| AGE-10778 | FIXTURE, HOLDING | 3 | |
| AGE-10784 | FIXTURE, HOLDING | 3 | |
| AGE-11432 | FIXTURE ASSEMBLY, HOLDING. FIXED WOBBLER | 2 | |
| AGE-11848 | FIXTURE, HOLDING, ROTOR | 2 | |
| AGE10023 | HOLDING FIXTURE | 3 | |
| AGE10032 | ASSEMBLY HOLDING FIXTURE | 3 | |
| AGE10038 | HOLDING FIXTURE | 2 | |
| AGE10040 | Holding Fixture | 2 | |
| AGE10043 | ASSEMBLY HOLDING FIXTURE | 2 | |
| AGE10043A | ASSEMBLY HOLDING FIXTURE | 1 | |
| AGE10048 | FIXTURE, HOLDING | 5 | |
| AGE10055 | HOLDING FIXTURE | 2 | |
| AGE10061 | FIXTURE HOLDING | 1 | |
| AGE10061 (FDS-45382) | Holding Fixture | 1 | |
| AGE10079 | HOLDING FIXTURE | 1 | |
| AGE10082 | HOLDING FIXTURE | 2 | |
| AGE10136 | HOLDING FIXTURE | 2 | |
| AGE10158 | HOLDING FIXTURE ASSEMBLY | 1 | |
| AGE10239 | FIXTURE HOLDING | 1 | |
| AGE10242 | FIXTURE HOLDING | 1 | |
| AGE10247 | FIXTURE HOLDING | 1 | |
| AGE10259 | FIXTURE HOLDING | 1 | |
| AGE10332 | FIXTURE HOLDING | 2 | |
| AGE10337 | FIXTURE ASSY, HOLDING | 2 | |
| AGE10341 | HOLDING FIXTURE | 3 | |
| AGE10346 | HOLDING FIXTURE | 3 | |
| AGE10347 | Assembly Holding Fixture | 1 | |
| AGE10348 | Holding Fixture | 1 | |
| AGE10353 | HOLDING FIXTURE | 1 | |
| AGE10356 | HOLDING FIXTURE | 1 | |
| AGE10358 | HOLDING FIXTURE | 2 | |
| AGE10371 | HOLDING FIXTURE | 3 | |
| AGE10375 | FIXTURE, HOLDING | 2 | |
| AGE10379 | ASSEMBLY HOLDING FIXTURE | 2 | |
| AGE10381 | Rotor Holding Fixture | 1 | |
| AGE10396 | ASSEMBLY HOLDING FIXTURE | 1 | |
| AGE10397 | HOLDING FIXTURE | 3 | |
| AGE10400 | Holding Fixture | 1 | |
| AGE10402 | Holding Fixture | 1 | |
| AGE10774 | HOLDING FIXTURE | 2 | |
| AGE10778 | HOLDING FIXTURE | 3 | |
| AGE10782 | HOLDING FIXTURE | 1 | |
| AGE10784 | HOLDING FIXTURE | 3 | |
| AGE10786 | HOLDING FIXTURE | 1 | |
| AGE10794 | HOLDING FIXTURE | 1 | |
| AGE10808 | HOLDING FIXTURE | 1 | |
| AGE10815 | FIXTURE HOLDING | 2 | |
| AGE11246 | ROTOR HOLDING FIXTURE | 1 | |
| AGE11289 | HOLDING FIXTURE | 1 | |
| AGE11330 | HOLDING FIXTURE | 1 | |
| AGE11402 | HOLDING FIXTURE | 1 | |
| AGE11406 | FIXTURE, HOLDING | 1 | |
| AGE11432 | FIXED WOBBLER HOLDING FIXTURE | 2 | |
| AGE11591 | ASSEMBLY HOLDING FIXTURE | 1 | |
| AGE11596 | HOLDING FIXTURE | 2 | |
| AGE11598 | ASSEMBLY HOLDING FIXTURE | 1 | |
| AGE11603 | ASSEMBLY HOLDING FIXTURE | 1 | |
| AGE11636 | Rotor Holding Fixture Insert | 2 | |
| AGE11667 | HOLDING FIXTURE ASSEMBLY, ROTOR | 2 | |
| AGE11813 | FIXTURE, ASSEMBLY HOLDING | 2 | |
| AGE11813PM | DISCONNECT HOLDING FIXTURE | 1 | |
| AGE11821 | HOLDING FIXTURE | 1 | |
| AGE11821PM | HOLDING FIXTURE | 1 | |
| AGE11848 | FIXTURE HOLDING | 2 | |
| AGE11855 | HOLDING FIXTURE | 2 | |
| AGE12172 | HOLDING FIXTURE | 1 | |
| AGE12184 | FIXTURE HOLDING | 1 | |
| AGE12196 | Holding Fixture | 2 | |
| AGE12243 | HOLDING FIXTURE | 1 | |
| AGE12373-9 | Rotor Holding Fixture Insert | 1 | |
| AGE12747 | HOLDING FIXTURE | 1 | |
| AGE12887 | HOLDING FIXT | 1 | |
| AGE12917 | HOLDING FIXTURE | 2 | |
| AGE12925 | holding fixture | 1 | |
| AGE12964 | HOLDING FIXTURE | 3 | |
| AGE13116 | DISCONNECT HOLDING FIXTURE | 2 | |
| AGE13241 | HOLDING FIXTURE | 2 | |
| AGE13255 | ADAPTER, ASSY., HOLDING FIXTURE-T50 AMAD | 1 | |
| AGE13278 | HOLDING FIXTURE | 1 | |
| AGE13279 | HOLDING FIXTURE | 2 | |
| AGE13403 | FIXTURE, DISCONNECT HOLDING | 1 | |
| AGE13570 | FIXTURE ASSEMBLY, HOLDING | 1 | |
| AGE13578 | FIXTURE ASSEMBLY, HOLDING | 1 | |
| AGE13581 | FIXTURE, HOLDING, ASSEMBLY | 1 | |
| AGE13856 | HOLDING FIXTURE | 1 | |
| AGE13859 | HOLDING FIXTURE | 1 | |
| AGE13861 | HOLDING FIXTURE | 1 | |
| AGE13875 | HOLDING FIXTURE | 1 | |
| AGE13934 | FIXTURE, ASSY HOLDING | 1 | |
| AGE14038 | HOLDING FIXTURE | 2 | |
| AGE14074 | HOLDING FIXTURE | 2 | |
| AGE14075 | FIXTURE, ASSEMBLY HOLDING | 2 | |
| AGE14076 | HOLDING FIXTURE, ASSEMBLY | 2 | |
| AGE14077 | FIXTURE, HOLDING, ASSEMBLY | 2 | |
| AGE14078 | Holding Fixture | 1 | |
| AGE14079 | FIXTURE, HOLDING | 1 | |
| AGE14758 | FIXTURE, HOLDING | 1 | |
| AGE14773 | FIXTURE, HOLDING | 1 | |
| AGE14893 | ASSEMBLY, HOLDING FIXTURE | 1 | |
| AGE14900 | ASSEMBLY, STRAINER HOLDING FIXTURE | 1 | |
| AGE15187 | PRESSURE DROP HOLDING FIXTURE | 1 | |
| AGE15835 | HOLDING FIXTURE | 1 | |
| AGE15901 | HOLDING FIXTURE | 1 | |
| AGE160099 | HOLDING FIXTURE | 1 | |
| AGE16099 | HOLDING FIXTURE | 1 | |
| AGE16269 | FIXTURE, HOLDING, FLYWEIGHT | 1 | |
| AGE16271 | FIXTURE, HOLDING | 1 | |
| AGE16274 | FIXTURE, HOLDING | 1 | |
| AGE16277 | FIXTURE, HOLDING | 1 | |
| AGE16392 | HOLDING FIXTURE, PRIMARY HEAT EXCHANGER | 1 | |
| AGE16560 | FIXTURE, HOLDING | 1 | |
| AGE16700 | Holding Fixture | 1 | |
| AGE16701 | Holding Fixture | 1 | |
| AGE16837 | Holding Fixture | 1 | |
| AGE17319 | Holding Fixture | 1 | |
| AGE17630 | FIXTURE, HOLDING, BEARING LINER REMOVAL | 1 | |
| AGE17633 | FIXTURE, HOLDING, BEARING LINER INSTALL | 1 | |
| AGE17638 | Fixture, Holding, Bearing Liner Removal | 1 | |
| AGE17639 | Fixture, Holding Bearing Liner Install | 1 | |
| AGEI0032 | FIXTURE, HOLDING | 1 | |
| AGEI0040 | HOLDING FIXTURE | 1 | |
| AGEI0043 | FIXTURE, ASSEMBLY HOLDING | 1 | |
| AGEI0048 | FIXTURE, HOLDING | 1 | |
| AGEI006I | FIXTURE HOLDING | 1 | |
| AGEI0082 | FIXTURE, HOLDING | 1 | |
| AGEI0346 | HOLDING FIXTURE | 1 | |
| AGEI034I | FIXTURE, HOLDING | 1 | |
| AGEI0379 | FIXTURE ASSEMBLY, HOLDING | 1 | |
| AGEI037I | FIXTURE, HOLDING | 1 | |
| AIT320016 | HOLDING FIXTURE | 1 | |
| AJ65B80482 | HOLDING FIXTURE - QUADRANT ASSEMBLY, ELEVATOR CONTROL | 1 | |
| AJ65B81127 | FIXTURE - HOLDING | 1 | |
| AJ65B81128 | FIXTURE - HOLDING | 1 | |
| AJ65B81129 | FIXTURE - HOLDING | 1 | |
| AKS-19990 | Holding Fixture | 1 | |
| AKS19990 | HOLDING FIXTURE | 1 | |
| APC100-3-10 | HOLDING FIXTURE | 1 | |
| APN 801308-S58-2 | Valve Holding Fixture | 1 | |
| APN 803213-S58-10 | Valve Holding Fixture | 1 | |
| APN 803213-S58-2 | VALVE HOLDING FIXTURE /TEST FIXTURE | 1 | |
| APN803212-S91-3 | VALVE HOLDING FIXTURE/TEST FIXTURE | 1 | |
| APN803213-S58-2 | VALVE HOLDING FIXTURE | 1 | |
| ARG7076-5511 | Metering Valve Test / Holding Fixture | 2 | |
| ASI-18-9B | Capstan Fixture Holding | 4 | |
| ASP180 | AIR START CONTINUOUS FLOW (TRILECTRON INDUSTRIES, INC. (DIV. GSE HOLDINGS INC)) | 1 | |
| AT-911483 | FIXTURE, HOLDING | 1 | |
| AT27804 | HOLDING FIXTURE | 1 | |
| AT31811 | NLG FIXTURE (HOLDING & TESTING) | 1 | |
| AT5238 | HOLDING FIXTURE | 1 | |
| AT5368 | HOLDING FIXTURE, PART | 1 | |
| B27022-16-HM | HYDRO MFD PARTS -0 HOLDING TOOL | 1 | |
| B27034-2 | INDICATOR HOLDING FIXTURE | 1 | |
| B29002-1 | HOLDING FIXTURE | 14 | |
| BDS-34332 | Holding Fixture | 1 | |
| BRE-53830 | HOLDING FIXTURE | 1 | |
| BRE53830 | HOLDING FIXTURE | 1 | |
| C067-00-0131 | HOLDING FIXTURE | 1 | |
| C104-00-0014 | HOLDING FIXTURE | 1 | |
| C117-00-0290 | HOLDING FIXTURE PP/M | 1 | |
| C117-00-0291 | HOLDING FIXTURE | 1 | |
| C117-00-0302 | HOLDING FIXTURE | 1 | |
| C117-00-0920 | HOLDING FIXTURE | 1 | |
| C24839010-HF | HOLDING FIXTURE | 1 | |
| C27023-1 | HOLDING FIXTURE - LEADING EDGE SLAT ACTUATOR | 1 | |
| C27047-41 | Holding Fixture | 24 | |
| C27079-1 | Holding Equipment - Trailing Edge Inboard Flap | 8 | |
| C32008-1 | HOLDING FIXTURE - MLG DAMPER | 3 | |
| C32027 | Lever Assembly Holding Fixture | 1 | |
| C32027-1 | Holding Fixture Equipment - Functional Test, Landing Gear Control Lever | 2 | |
| C32027-2 | Holding Fixture Equipment - Functional Test, Landing Gear Control Lever | 2 | |
| C32027-3 | Holding Fixture Equipment - Functional Test, Landing Gear Control Lever | 2 | |
| C32037 | HOLDING FIXTURE MAIN LANDING GEAR | 1 | |
| C32037-1 | Holding Fixture - Main Landing Gear | 10 | |
| C32037-1-M | HOLDING FIXTURE | 1 | |
| C32037-46 | HOLDING FIXTURE - MAIN LANDING GEAR | 1 | |
| C32045-1 | HOLDING FIXTURE | 3 | |
| C32045-23 | Holding Fixture - Seal Change, Main Landing Gear | 5 | |
| C32045-63 | HOLDING FIXTURE - SEAL CHANGE, MAIN LANDING GEAR | 4 | |
| C32046-1 | Holding Fixture Equipment - Shimmy Damper Assembly, Main Landing Gear | 10 | |
| C32046-2 | Holding Fixture Assembly | 1 | |
| C32046-25 | HOLDING FIXTURE EQUIPMENT - SHIMMY DAMPER ASSEMBLY, MAIN LANDING GEAR | 3 | |
| C32046-26 | Holding fixture kit | 1 | |
| C32046-27 | Holding fixture assy | 1 | |
| C32046-35 | HOLDING FIXTURE | 1 | |
| C32063-1 | HOLDING FIXTURE - SEAL CHANGE, MAIN LANDING GEAR | 1 | |
| C47784 | HOLDING FRENCH | 1 | |
| C52001-1 | Holding Fixture - Compressed Spring Cartridge | 3 | |
| C52001-2 | Holding fixture assy | 1 | |
| C52004 | HOLDING FIXTURE - COMPRESSED SPRING CARTRIDGE | 1 | |
| C52004-1 | HOLDING FIXTURE - COMPRESSED SPRING CARTRIDGE | 12 | |
| C57006-1 | Holding Fixture - Winglet | 8 | |
| C632G3102101 | HOLDING TOOL FOR FAN FLANGE | 1 | |
| C632G3102102 | HOLDING TOOL FOR FAN FLANGE | 1 | |
| C632G3102103 | HOLDING TOOL FOR FAN FLANGE | 1 | |
| C78012-14 | THRUST REVERSER OPENING AND HOLDING FIXTURE | 21 | |
| CAT5663-13 | HOLDING FIXTURE | 1 | |
| CE-1200100 | WAFER BASE HOLDING FIXTURE | 1 | |
| CG9551001-0001 | HSTA INSIDE FUSE HOLDING TOOL | 1 | |
| CHA1057-064-1 | HOLDING FIXTURE | 1 | |
| CHA1540-0252 | Holding Fixture | 1 | |
| CHA1542-0055 | HOLDING FIXTURE(3IT) | 1 | |
| CHA1542-0055PM | HOLDING FIXTURE(3IT) | 1 | |
| CHA1542-0181 | Holding Fixture | 1 | |
| CHA1542-0181PM | HOLDING FIXTURE | 1 | |
| CHA1544-0209-F | HOLDING FIXTURE | 1 | |
| CHA1898-0058 | HOLDING FIXTURE | 1 | |
| CHA705-659 | HOLDING FIXTURE | 1 | |
| CHA711-140 | HOLDING FIXTURE | 1 | |
| CHA717-084 | HOLDING FIXTURE | 1 | |
| CHA717-255 | HOLDING FIXTURE | 1 | |
| CHA723-1073 | HOLDING FIXTURE | 1 | |
| CJMD327-100 | GEARBOX HOLDING FIXTURE | 2 | |
| CJMDS32-002 | FIXTURE -OLEO HOLDING | 1 | |
| CPWA-30420 | Fixture – Holding | 1 | |
| CPWA-30482 | Fixture – Holding, Accessories Gear Box Coupling S | 1 | |
| CT30904 | HOLDING FIXTURE | 1 | |
| D21852-1000 | HOLDING BLOCK TO CHECK THE RADIAL DISTORTION OF THE HALF-WHEELS | 5 | |
| D2727025120000 | HOLDING FIXTURE | 1 | |
| D46028 | TOOL FOR HOLDING STOP (2 IT) | 1 | |
| D4697 | DUMMY SPINDLE FOR HOLDING SPACER | 1 | |
| D46970 | DUMMY SPINDLE FOR HOLDING SPACER | 3 | |
| D90ST2001-000-HF | HOLDING FIXTURE | 1 | |
| DAH 602541 | Holding Fork | 1 | |
| DAH600517 | HOLDING FIXTURE | 1 | |
| DAH601979 | FIXTURE-SETTING AND HOLDING | 1 | |
| DAH602255 | FIXTURE-HOLDING | 1 | |
| DAH602256 | FIXTURE-HOLDING | 1 | |
| DAH602337 | FIXTURE-HOLDING | 1 | |
| DAH602339 | FIXTURE-HOLDING | 1 | |
| DAH602541 | HOLDING FORK | 1 | |
| DAH602682 | HOLDING FIXTURE | 1 | |
| DAH603061 | FORK-HOLDING | 1 | |
| DBS-CG1-F | Holding Fixture for DBS-CG1 | 1 | |
| DRT20167 | HOLDING FIXTURE | 1 | |
| DRT68009 | HOLDING FIXTURE | 5 | |
| DRT68010 | Holding Fixture | 3 | |
| DRT68019 | Holding fixture | 3 | |
| DRT68023 | Holding Fixture | 1 | |
| DRT68385 | HOLDING FIXTURE | 3 | |
| E00332 | HOLDING FIXTURE FIRST STAGE ASSEMBLY | 1 | |
| E51767-1 | HOLDING FIXTURE | 1 | |
| Ex-74971 | Fixture, holding, compressor vane assy | 1 | |
| Ex-74972 | Fixture, holding, compressor vane assy | 1 | |
| Ex-92646 | Fixture-holding, rear carrier | 1 | |
| Ex-92647 | Fixture-holding, nose bearing plate | 1 | |
| Ex-97184 | Fixture-holding, nose bearing plate | 1 | |
| Ex-98304 | Fixture-holding, diffuser scroll | 1 | |
| F-6404 | HOLDING FIXTURE | 1 | |
| F-6411 | HOLDING FIXTURE | 1 | |
| F-6412 | HOLDING FIXTURE | 1 | |
| F-6416 | HOLDING FIXTURE | 1 | |
| F-6893 | FIXTURE HOLDING | 1 | |
| F-6893 PM | FIXTURE HOLDING | 1 | |
| F1000884 | HOLDING FIXTURE FOR HOUSING SUBASSEMBLY | 1 | |
| F3368 | HOLDING FIXTURE | 1 | |
| F52-0-599 | HOLDING FIXTURE | 1 | |
| F59-0-50020 | Holding Fixture | 1 | |
| F59-0-50022 | Holding Fixture | 1 | |
| F70220-1 | HOLDING FIXT | 1 | |
| F70320-1 | Holding Fixture - Control Column | 10 | |
| F70320-1-M | HOLDING FIXTURE-CONTROL COLUMN | 1 | |
| F70320-15 | SHAFT - HOLDING FIXTURE, CONTROL COLUMN (SHAFT F70320-15 IS PART OF BASE F70320-2 INCLUDED KIT F70320-1) | 1 | |
| F70320-2 | HOLDING FIXTURE | 1 | |
| F72804 | HOLDING FIXTURE -0 FLAP TRANSMISSION USED TO | 1 | |
| F80-0-1318 | HOLDING FIXTURE | 1 | |
| F80-0-2604 | Holding Fixture | 1 | |
| F80-0-2614 | Holding Fixture | 1 | |
| F80-0-2774 | Holding Fixture | 1 | |
| F80-0-2791 | Holding Fixture | 1 | |
| F80-0-2791PM | HOLDING FIXTURE | 1 | |
| F80-0-2792 | Holding Fixture-Piston,L.E.Slat Actuator | 1 | |
| F80-0-2792PM | HOLDING FIXTURE-PISTON,L.E.SLAT ACTUATOR | 1 | |
| F80-0-2847 | Holding Fixture | 1 | |
| F80-0-2847PM | HOLDING FIXTURE | 1 | |
| F80-0-2994 | Holding Fixture | 1 | |
| F80-0-3116 | HOLDING FIXTURE | 1 | |
| F80-0-3118 | HOLDING FIXTURE | 1 | |
| F80-0-3261 | HOLDING FIXTURE | 1 | |
| F80-0-4162 | Holding Fixture | 1 | |
| F80-0-4231TK | Holding Fixture | 1 | |
| F80-0-4889 | Assembly Holding Fixture | 14 | |
| F80-0-50260 | HOLDING FIXTURE | 1 | |
| F80-0-50577 | HOLDING FIXTUTE | 1 | |
| F80-0-50871 | SHAFT HOLDING WRENCH | 1 | |
| F80-0-50918 | HOLDING FIXTURE | 1 | |
| F80-0-50941 | Holding Fixture | 1 | |
| F80-0-51181 | HOLDING FIXTURE | 1 | |
| F80-0-512 | HOLDING FIXTURE | 1 | |
| F80-0-51225 | HOLDING FIXTURE | 1 | |
| F80-0-56050 | HOLDING FIXTURE | 1 | |
| F80-0-56237 | Test, Holding Fixture Rotating (6IT) | 1 | |
| F80-0-5786 | Holding Fixture | 1 | |
| F80-0-5955 | POW-R-ARM HOLDING FIXTURE | 1 | |
| F80088-1 | HOLDING FIXTURE NOSE GEAR UPPER ORIFICE SUPPORT TU | 1 | |
| F80088-1 -3 | Holding Fixture -Upper Orifice Support Tube. Nose Gear | 1 | |
| F80088-3 | HOLDING FIXTURE | 2 | |
| F80094-4 | HOLDING FIXTURE ASSY | 1 | |
| F80096-1 | HOLDING FIXTURE FWD TRUNNION | 2 | |
| F80096-1 -4 -7 | Holding Fixture -Forward Trunnion Bearing Housing. Main Gear | 1 | |
| F80096-4 | HOLDING FIXTURE- FWD TRUNNION | 10 | |
| F80096-4-M | HOLDING FIXTURE | 1 | |
| F80096-7 | HOLDING FIXTURE ASSY | 7 | |
| F80189-1 | HOLDING FIXTURE - BRAKE VALVE | 1 | |
| F80189-1A | HOLDING FIXTURE, BRA | 1 | |
| F80189-1B | HOLDING FIXTURE BRAK | 1 | |
| F80263-1 | HOLDING FIXTURE | 4 | |
| FBS-30134 | Holding Fixture | 1 | |
| FBS-39920 | Assembly Holding Fixture | 1 | |
| FBS30134 | HOLDING FIXTURE | 1 | |
| FBS32473 | ASSEMBLY HOLDING FIXTURE | 1 | |
| FCS51386 | HOLDING FIXTURE | 1 | |
| FCS51590 | HOLDING FIXTURE | 1 | |
| FDS-10708 | FIXTURE, ASSEMBLY, HOLDING | 1 | |
| FDS-11233 | Holding Fixture | 1 | |
| FDS-14406 | Assy Holding Fixture | 1 | |
| FDS-18078 | Holding Fixture | 1 | |
| FDS-18564 | Assy Holding Fixture | 1 | |
| FDS-2636 | Assy Holding Fixture | 1 | |
| FDS-32136 | Assembly Holding Fixture | 1 | |
| FDS-32140 | FIXTURE, ASSEMBLY, HOLDING | 2 | |
| FDS-32473 | Assembly Holding Fixture | 1 | |
| FDS-33295 | ASSEMBLY HOLDING FIXTURE | 1 | |
| FDS-33570 | Holding Fixture | 1 | |
| FDS-34160 | Holding Fixture | 1 | |
| FDS-34302 | FIXTURE, ASSEMBLY, HOLDING | 2 | |
| FDS-34332 | FIXTURE, ASSEMBLY, HOLDING | 1 | |
| FDS-34355 | Holding Fixture | 1 | |
| FDS-34702 | FIXTURE, ASSEMBLY, HOLDING | 2 | |
| FDS-34861 | Holding Fixture | 1 | |
| FDS-35889 | Assembly Holding Fixture | 1 | |
| FDS-36315 | Assembly Holding Fixture | 1 | |
| FDS-36638 | FIXTURE, ASSEMBLY, HOLDING | 2 | |
| FDS-39022 | Holding Fixture | 1 | |
| FDS-39914 | Assembly Holding Fixture | 1 | |
| FDS-40115 | Holding Fixture | 1 | |
| FDS-40275 | Holding Fixture | 1 | |
| FDS-43463 | Holding Fixture | 1 | |
| FDS-43925 | Assembly Holding Fixture | 1 | |
| FDS-6224 | Holding Fixture | 1 | |
| FDS14406 | ASSY HOLDING FIXTURE | 1 | |
| FDS18078 | HOLDING FIXTURE | 1 | |
| FDS18564 | ASSY HOLDING FIXTURE | 1 | |
| FDS2636 | ASSY HOLDING FIXTURE | 1 | |
| FDS32473 | ASSEMBLY HOLDING FIXTURE | 1 | |
| FDS33570 | HOLDING FIXTURE | 1 | |
| FDS33651 | FIXTURE HOLDING FOR RAM AIR TURBINE 730816 | 1 | |
| FDS33917 | HOLDING FIXTURE | 1 | |
| FDS34302 | ASSEMBLY HOLDING FIXTURE | 2 | |
| FDS34469 | HOLDING FIXTURE | 1 | |
| FDS34702 | ASSEMBLY HOLDING FIXTURE | 2 | |
| FDS34744 | HOLDING FIXTURE | 1 | |
| FDS34802 | FIXTURE HOLDING FOR RAM AIR TURBINE 730816 | 1 | |
| FDS34974 | HOLDING FIXTURE | 1 | |
| FDS35288 | FIXTURE HOLDING FOR EJECTION JACK AY 730820 | 1 | |
| FDS35292 | FIXTURE HOLDING FOR EJECTION JACK AY 730820 | 1 | |
| FDS35778 | ASSEMBLY HOLDING.FIXTURE | 1 | |
| FDS35805 | FIXTURE AY HOLDING FOR 730816 RAM AIR TURBN | 1 | |
| FDS35822 | ASSEMBLY HOLDING FIXTURE DELETED | 1 | |
| FDS35889 | ASSEMBLY HOLDING FIXTURE | 1 | |
| FDS36571 | HOLDING FIXTURE | 1 | |
| FDS36572 | HOLDING FIXTURE | 1 | |
| FDS36638 | HOLDING FIXTURE | 2 | |
| FDS37455 | ASSEMBLY HOLDING FIXTURE | 1 | |
| FDS37459 | ASSEMBLY HOLDING FIXTURE | 1 | |
| FDS38732 | ASSEMBLY HOLDING FIXTURE | 1 | |
| FDS400-223 | ASSEMBLY HOLDING FIXTURE | 2 | |
| FDS45732 | HOLDING FIXTURE | 1 | |
| FDS6224 | HOLDING FIXTURE | 1 | |
| FGBD929501 | TOOL FOR LOCKING PRESSURE HOLDING VALVE TAPET | 1 | |
| FI000884 | HOLDING FIXTURE FOR HOUSING SUBASSEMBLY | 1 | |
| FI000884-A | HOLDING FIXTURE FOR HOUSING SUBASSEMBLY | 1 | |
| FI000884-B | HOLDING FIXTURE FOR HOUSING SUBASSEMBLY | 1 | |
| FME-65-73761 | HOLDING FIXTURE | 5 | |
| FME65-73761 | HOLDING FIXTURE -0 MAIN LANDING GEAR | 5 | |
| FME65-73761-1 | HOLDING FIXTURE -0 MLG | 1 | |
| FS0-0-50495 | Holding Fixture | 1 | |
| FXT-03000 | RELIEF VALVE HOLDING FIXTURE | 1 | |
| FXT-03663 | HOLDING FIXTURE (5IT) | 1 | |
| FXT-04335 | HOLDING COMPRESSION FIXTURE | 1 | |
| FXT-05508 | HOLDING FIXTURE | 1 | |
| FXT-07817 | IGV Holding Fixture | 1 | |
| FXT-09640 | Holding fixture, impeller | 1 | |
| FXT-09694 | BEARING HOLDING FIXTURE | 1 | |
| FXT-10514-P01 | HOLDING FIXTURE | 1 | |
| FXT-10514-P02 | HOLDING FIXTURE | 1 | |
| FXT-10514-P03 | HOLDING FIXTURE | 1 | |
| FXT-10605 | ROTOR HOLDING FIXTURE | 1 | |
| FXT-10771 | Holding fixture | 1 | |
| FXT-10773 | HOLDING FIXTURE | 1 | |
| FXT-14374 | INSTALLATION TOOL HOLDING FIXTURE | 1 | |
| FXT-14931 | HOLDING FIXTURE, IMPELLER | 1 | |
| FXT-17903 | HOLDING FIXTURE | 1 | |
| FXT05508 | HOLDING FIXTURE | 1 | |
| FXT06280 | HOLDING FIXTURE | 1 | |
| FXT07817 | IGV HOLDING FIXTURE | 1 | |
| FXT09694 | BEARING HOLDING FIXTURE | 1 | |
| G106-00-0660 | HOLDING FIXTURE | 1 | |
| G600-200028-1 | TOOL, UNIVERSAL RECORDER HOLDING FIXTURE | 1 | |
| G600−200028−1 | Universal − Recorder Holding Fixture | 1 | |
| G601-280013-1 | HOLDING FIXTURE FOR AFT FUEL TANK. | 1 | |
| GA3538 | PROTO FLEXIBLE RETREAVING / HOLDING TOOLS | 1 | |
| GA47521 | HOLDING TOOL USED TO LOCK THE LOCK LINK FOR STORAGE | 1 | |
| GA47593 | Holding Fixture | 1 | |
| GS10456-1 | FIXTURE - HOLDING MOTOR | 1 | |
| GS10608-1 | THROTTLE VALVE CAP HOLDING FIXTURE | 1 | |
| GS10724 | FIXTURE, HOLDING | 1 | |
| GS10756 | FIXTURE HOLDING | 1 | |
| GS11397 | FIXTURE BLADE HOLDING | 1 | |
| GS11445 | FIXTURE HOLDING | 1 | |
| GS11446 | FIXTURE HOLDING | 1 | |
| GS11447 | FIXTURE HOLDING LM SEN | 1 | |
| GS12534 | FIXTURE, HOLDING | 1 | |
| GS12562 | FIXTURE, HOLDING | 1 | |
| GS12697 | SPACER BLADE HOLDING F | 1 | |
| GS12699 | ARBOR BLADE HOLDING FI | 1 | |
| GS13106 | FIXTURE PISTON HOLDING | 1 | |
| GS13159-1 | FIXTURE, HOLDING | 1 | |
| GS13165-1 | FIXTURE, ROTATIVE ASSY HOLDING | 2 | |
| GS13408-1 | TV HOLDING FIXTURE | 1 | |
| GS13518 | FIXTURE HOLDING | 1 | |
| GS13566-1 | FIXTURE HOLDING | 1 | |
| GS13932 | FIXTURE HOLDING | 1 | |
| GS13932-1 | HOLDING FIXTURE | 1 | |
| GS14062-1 | FIXTURE, HOLDING | 1 | |
| GS14674-1 | HOLDING FIXTURE ELBOW | 1 | |
| GS14706-1 | HOLDING FIXTURESUPPORT, ROTOR SLEEVE | 2 | |
| GS14855-1 | HOLDING FIXTURE | 1 | |
| GS15029-1 | FIXTURE, HOLDING | 1 | |
| GS15531-1 | FIXTURE, HOLDING | 1 | |
| GS15664-3 | FIXTURE, HOLDING | 1 | |
| GS15664-4 | FIXTURE, HOLDING | 1 | |
| GS15771-1 | HOLDING FIXTURE | 1 | |
| GS16022-1 | FIXTURE, HOLDING FL YBALL GOVERNOR | 1 | |
| GS19540-1 | FIXTURE, VALVE HOLDING | 1 | |
| GS20046-1 | FIXTURE, HOLDING | 2 | |
| GS20346-1 | HOLDING FIXTURE | 2 | |
| GS20649-1 | FIXTURE, HOLDING | 1 | |
| GS21742-1 | FIXTURE, HOLDING | 1 | |
| GS22024-1 | HOLDING FIXTURE | 1 | |
| GS22234-1 | FIXTURE, VALVE HOLDING | 1 | |
| GS22330-1 | COMP END HOLDING FIXTURE | 2 | |
| GS22331-1 | FAN END HOLDING FIXTURE | 2 | |
| GS22358-1 | HOLDING FIXTURE | 1 | |
| GS22645-1 | FIXTURE, HOLDING | 1 | |
| GS22646-1 | FIXTURE, HOLDING | 1 | |
| GS22817-1 | HOLDING FIXTURE | 1 | |
| GS22826-1 | FIXTURE, DIFFUSER HOLDING | 1 | |
| GS22827-1 | FIXTURE, HOLDING | 1 | |
| GS22849-1 | FIXTURE, HOLDING | 2 | |
| GS22926-1 | HOLDING FIXTURE | 1 | |
| GS22928-1 | HOLDING FIXTURE | 1 | |
| GS23304-1 | FIXTURE, HOLDING | 1 | |
| GS23598 | Holding Fixture | 1 | |
| GS23610-1 | HOLDING FIXTURE | 1 | |
| GS23992-1 | HOLDING FIXTURE | 1 | |
| GS24004-1 | HOLDING FIXTURE | 1 | |
| GS24091-1 | HOLDING FIXTURE, PRESSURE TEST | 1 | |
| GS24189-1 | HOLDING FIXTURE | 1 | |
| GSE809- 212A4002-HF | HOLDING FIXTURE AFT PNEUMATIC SOURCE ASSY & TEST | 1 | |
| H21984 | HOLDING FIXTURE | 1 | |
| H301ABV201M | WEDGE FOR HOLDING | 1 | |
| H341ADV203M | SPACER FOR HOLDING FAST ERECTION ROD | 1 | |
| H47827 | HOLDING TOOL FOR END FITTING | 1 | |
| HC-31796 | MLG FIXTURE (HOLDING & TESTING) | 1 | |
| HF1P375A0002-00 | HOLDING FIXTURE | 1 | |
| HF1P375A000200 | HOLDING FIXTURE | 1 | |
| HF1P376A0002-00 | HOLDING FIXTURE | 1 | |
| HF2342 | HOLDING FIXTURE | 1 | |
| HF2348 | HOLDING FIXTURE | 1 | |
| HF2P376A0002-00 | HOLDING FIXTURE | 1 | |
| HF9-217-33 | Holding Fixture | 1 | |
| HHS-32701 | Housing Holding Fixture | 1 | |
| HHS32701 | HOUSING HOLDING FIXTURE | 1 | |
| HS-32701 | HOUSING HOLDING FIXTURE | 1 | |
| HS-7572 | FIXTURE - BLADE HOLDING | 1 | |
| HS-8170 | ARBOR - HOLDING FIXTURE, BLADE | 1 | |
| HS6961 | FIXTURE HOLDING | 1 | |
| HS7461 | FIXTURE HOLDING | 1 | |
| HS7469 | FIXTURE HOLDING | 1 | |
| HS7539 | HOLDING FIXUTRE | 2 | |
| HS7572 | FIXTURE HOLDING | 1 | |
| HS7573 | BLADE HOLDING FIXTURE ARBOR | 1 | |
| HS8007 | FIXTURE - VALVE HOUSING HOLDING | 1 | |
| HS8107 | UPPER BODY HOLDING FIXTURE | 1 | |
| HS8600 | FIXTURE HOLDING | 1 | |
| HS8608 | FIXTURE HOLDING | 1 | |
| HS8616 | FIXTURE,HOLDING,SEA | 1 | |
| HS8659 | FIXTURE HOLDING | 1 | |
| HS8661 | FIXTURE HOLDING | 1 | |
| HS8667 | FIXTURE HOLDING | 1 | |
| HS8683 | FIXTURE HOLDING | 1 | |
| HS8782 | FIXTURE HOLDING | 1 | |
| HS8809 | FIXTURE, HOLDING REF RIG PACK | 2 | |
| HS9175 | FIXTURE HOLDING | 1 | |
| HS9176 | FIXTURE HOLDING | 1 | |
| HS9182 | FIXTURE HOLDING | 1 | |
| HS9252 | BODY HOLDING FIXTURE | 1 | |
| HS9363 | FIXTURE HOLDING | 1 | |
| HS9380 | ARBOR - BLADE HOLDING FIXTURE | 1 | |
| HS9381 | ARBOR - BLADE HOLDING FIXTURE | 1 | |
| HS9581 | FIXTURE HOLDING | 1 | |
| HS9658 | FIXTURE HOLDING | 1 | |
| HS9704 | FIXTURE - LIMITING LINKAGE HOLDING | 1 | |
| HS9757 | ARBOR - BLADE HOLDING FIXTURE | 1 | |
| HS9807 | FIXTURE AFT HOUSING HOLDING | 1 | |
| HS9808 | Fixture, Holding | 1 | |
| HSP3758 | CAM HOLDING FIXTURE | 1 | |
| HSP3759 | CAM HOLDING FIXTURE | 1 | |
| HUS-32285 | Holding Fixture | 1 | |
| HUS-32285 (AGE14038) | Holding Fixture | 1 | |
| HUS32285 | HOLDING FIXTURE | 1 | |
| Holding Block 4-16 | HOLDING BLOCK FIGURE 4-16, SPM 32-49-01 MADE BY AEROFAB NDT | 1 | |
| Holding Block No.1 | Honeywell Holding Block No.1, 32-49-01 page 4.E.-3. Includes Test Report and Certificate of Conformance. | 1 | |
| Holding Block No.2 | Honeywell Holding Block No.2, 32-49-01 page 4.E.-4. Includes Test Report and Certificate of Conformance. | 1 | |
| IAE1J12521 | FIXTURE, HOLDING | 1 | |
| IAE1J12538 | FIXTURE, HOLDING | 1 | |
| IAE1J12538A | FIXTURE, HOLDING | 1 | |
| IAE1J12546 | FIXTURE, HOLDING | 1 | |
| IAE1J12548 | FIXTURE, HOLDING RETAINER | 1 | |
| IAE1J2538A | FIXTURE, HOLDING | 1 | |
| IAE1P16271 | FIXTURE-HOLDING | 5 | |
| IAE1R118220-2 | FIXTURE HOLDING | 1 | |
| IAE1R18220 | FIXTURE, HOLDING | 1 | |
| IAE3R19167 | FIXTURE - HOLDING - FRONT STAGE 9-12 DIS | 1 | |
| IAE3R19168 | FIXTURE - HOLDING - REAR STAGE 9-12 DISC | 1 | |
| IAE3R19200 | FIXTURE - HOLDING - REAR STAGE 9-12 DISC | 1 | |
| IAG-230-01 | HOLDING FIXTURE FOR SHAFT | 1 | |
| J21841 | HOLDING FIXTURE | 1 | |
| J2345 | FLEXIBLE RETRIEVING AND HOLDING TOOL -23-1/2" | 1 | |
| J25013-47 | HOLDING ASSY - HOIST EQUIPMENT, FORWARD OFCR | 2 | |
| J27080-1 | HOLDING FIXTURE - TE FLAP, ANGLE GEARBOX | 1 | |
| J32062-1 | TRANSPORTATION EQUIPMENT - TOWER JACK OR HOLDING FIXTURE, MLG | 9 | |
| J32062-26 | TRANSPORTATION EQUIPMENT - TOWER JACK OR HOLDING FIXTURE, MLG | 7 | |
| J32075-43 | HOLDING FIXTURE ASSEMBLY | 1 | |
| J47138 | ADAPTOR FOR HOLDING ANTI-SHIMMY VALVE | 2 | |
| J47200 | Holding block for the check of buckling on the half-wheels, set of 3 EA | 10 | |
| JTC-5811 | MOBILE CART FOR OPENING AND HOLDING THE ENGINE COWL OF AIRBUS A320 AIRCRAFT | 1 | |
| K32020-1 | HOLDING FIXTURE | 9 | |
| K32020-29 | HOLDING FIXTURE | 9 | |
| K55006-73 | HOLDING FIXTURE | 9 | |
| K55006-75 | HOLDING FIXTURE | 9 | |
| LCTC4713 | #1 BRG HOLDING FIXTURE | 1 | |
| LEFT WINGLET | LEFT WINGLET HOLDING FIXTURE | 1 | |
| LL548A187 | HOLDING SHAFT | 1 | |
| LMT 00061 | SWIRLER HOLDING FIXTURE | 1 | |
| LMT 00064 | SWIRLER HOLDING FIXTURE | 1 | |
| LPF617-4422-001 | HEAD HOLDING FIXTURE | 1 | |
| LTCT 1064 | FIXTURE HOLDING | 1 | |
| LTCT 2075 | HOLDING FIXTURE FOR SUN GEAR | 1 | |
| LTCT 4553 | HOLDING FIXTURE | 2 | |
| LTCT10449 | HOLDING FIXTURE | 1 | |
| LTCT1064 | FIXTURE, HOLDING | 1 | |
| LTCT1064-01 | Fixture Assembly, Holding | 1 | |
| LTCT11060 | Fixture, Holding Power Turbine Blade | 1 | |
| LTCT11486 | Fixture, Holding | 1 | |
| LTCT115 | FIXTURE, HOLDING | 1 | |
| LTCT12969-01 | Fixture, Guide Tube Holding | 1 | |
| LTCT13001 | HOLDING FIXTURE | 1 | |
| LTCT13344-01 | FIXTURE, HOLDING-NUT TO SHAFT | 2 | |
| LTCT13688 | FIXTURE HOLDING NOZ | 1 | |
| LTCT13936-01 | Fixture Assembly, Holding | 1 | |
| LTCT14530 | AGB CASE HOLDING FIXTURE | 1 | |
| LTCT14540 | Fixture, Holding | 1 | |
| LTCT14575 | Holding Fixture | 1 | |
| LTCT14605 | HOLDING & FIXTURE TOOL | 1 | |
| LTCT14605-01 | Fixture, Holding and Torque | 1 | |
| LTCT14607-01 | Fixture, Holding | 1 | |
| LTCT14611-01 | Fixture, Holding, Bevel Gear and Backlash Gage | 1 | |
| LTCT14616-01 | Fixture, Holding, Fourth Wheel | 1 | |
| LTCT14787-01 | Fixture, Holding | 1 | |
| LTCT14794-01 | Fixture, Holding, Air/Oil Separator Gear Wrench | 1 | |
| LTCT1576 | Fixture, Holding, Disc Assembly | 1 | |
| LTCT2048 | COMPRESSOR PINION GEAR HOLDING FIXTURE | 1 | |
| LTCT2075 | FIXTURE HOLDING | 1 | |
| LTCT2149 | FIXTURE, HOLDING | 1 | |
| LTCT3024-B | NOF-FIXTURE HOLDING LTCT | 1 | |
| LTCT3040 | FIXTURE HOLDING | 2 | |
| LTCT30966 | HOLDING FIXTURE | 1 | |
| LTCT3927 | HOLDING TOOL SHAFT | 1 | |
| LTCT4440 | Base, Holding Fixture | 1 | |
| LTCT4441 | Adapter, Holding Fixture | 1 | |
| LTCT4533 | FIXTURE HOLDING | 1 | |
| LTCT4553 | FIXTURE, HOLDING/PULLER | 2 | |
| LTCT4713 | HOLDING FIXTURE | 1 | |
| LTCT4904 | FIXTURE, HOLDING | 1 | |
| LTCT4996 | FIXTURE,HOLDING,GEAR | 1 | |
| LTCT5020X | Fixture, Holding Turbine Rotor Shaft | 1 | |
| LTCT5432X | Wrench & Holding Fixture | 1 | |
| LTCT5438 | Fixture, Holding to Torque Nut | 1 | |
| LTCT5440 | Holding Fixture | 1 | |
| LTCT5450 | Holding & Torquing Fixture | 1 | |
| LTCT5451 | Holding & Torquing Fixture | 1 | |
| LTCT5468 | Wrench & Holding Fixture | 1 | |
| LTCT5580 | Holding Fixture | 1 | |
| LTCT5709-01 | Fixture, Holding, Nut and Gear Shaft Wrench | 1 | |
| LTCT5710 | Fixture, Holding | 1 | |
| LTCT5711-01 | Fixture, Holding, Nut and Sleeve Wrench | 1 | |
| LTCT5769 | Assy. Holding Fixture | 1 | |
| LTCT5782-01 | Fixture, Holding, Gear | 1 | |
| LTCT6641 | Holding Fixture (Compressor Rotor) | 1 | |
| LTCT7131x | Wrench & Holding Fixture | 1 | |
| LTCT7157x | Plate, Holding - Torque Fixture | 1 | |
| LTCT7184 | Fixture, Holding | 1 | |
| LTCT7202-01 | FIXTURE, HOLDING NO. 4 AND 5 BEARING OIL TUBE | 1 | |
| LTCT7605-01 | Fixture, Holding, First Stage Turbine Disc | 1 | |
| LTCT7699 | FIXTURE, HOLDING, SUN GEAR AFT | 1 | |
| LTCT7699-01 | Fixture, Holding, Sun Gear Aft | 1 | |
| LTCT7842 | Wrench and Holding Fixture, Nut and Gear Shaft | 1 | |
| LTCT896 | Fixture, Holding, Igniter Plug | 1 | |
| LTCT962 | TIE BOLT HOLDING FIXTURE | 2 | |
| M.DX7061N2-0 | HOLDING FIXTURE TO HOLD THE MANIFOLD ASSEMBLY DURING ASSEMBLY/ DISASSEMBLY | 1 | |
| M21862 | HOLDING BLOCK FOR CHECKING THE RADIAL DISTORTION OF THE HALF-WHEELS | 9 | |
| M46259 | HOLDING WRENCH FOR SEAT | 2 | |
| M56837A0000-01 | HOLDING FIXTURE | 1 | |
| M57524A0000-01 | HOLDING FIXTURE | 1 | |
| M57574A0000-01 | HOLDING FIXTURE | 1 | |
| M57890A0000-01 | HOLDING FIXTURE | 1 | |
| M58059A0000-01 | HOLDING FIXTURE | 1 | |
| M58115A0000-01 | HOLDING FIXTURE | 1 | |
| M58189A0000-01 | HOLDING FIXTURE | 1 | |
| M58190A0000-01 | HOLDING FIXTURE | 1 | |
| M58191A0000-01 | HOLDING FIXTURE | 1 | |
| M58222A0000-01 | HOLDING FIXTURE | 1 | |
| M58227A0000-01 | HOLDING FIXTURE | 1 | |
| M58436A0000-01 | HOLDING FIXTURE | 1 | |
| M58463A0000-01 | HOLDING FIXTURE | 1 | |
| M58573A0000-01 | HOLDING FIXTURE | 1 | |
| M65725354 | HOLDING FIXTURE | 1 | |
| M65725828B-1 | HOLDING FUXTURE | 1 | |
| M82000122 | HOLDING FIXTURE | 1 | |
| MAS-C | CARGO PANEL & FLOOR BOARD HOLDING TROLLEY | 1 | |
| MBEU56286 | HPRU HOLDING FIXTURE | 1 | |
| MBEU57834 | HOLDING FIXTURE-FIRING UNITS | 1 | |
| MHS33654 | FIXTURE,HOLDING- FOR RAM AIR TURBINE 730816 | 1 | |
| MIT-1544100-14 | HOLDING TOOL (PART OF MIT-1544100) | 1 | |
| MIT65-20846T1 | HHOLDING FIXTURE | 1 | |
| MIT65B18211 | HOLDING TOOL - UPPER SHOCK STRUT BULKHEAD FITTING, WING LANDING GEAR | 1 | |
| MKTM68 | HOLDING FIXTURE (HOFX) | 1 | |
| NA1080-05 | HOLDING FIXTURE (3IT) | 1 | |
| OTC6024 | CRANKSHAFT HOLDING TOOL | 1 | |
| OU129524 | Holding Fixture | 1 | |
| OU144972 | Holding Fixture | 1 | |
| OU145399 | HOLDING FIXTURE | 1 | |
| OU145407 | HOLDING FIXTURE | 1 | |
| OU190822 | THSA HOLDING FIXTURE | 1 | |
| P535A0028-00 | HOLDING FIXTURE | 1 | |
| P547A0039-00 | HOLDING FIXTURE (2 ITEMS) | 1 | |
| PF11167 | HOLDING FIX. | 1 | |
| PNEUMATIC HOLDING FIXTURE 2 | PNEUMATIC HOLDING FIXTURE | 1 | |
| PR46000-2 | BASE FOR HOLDING DUMMY SPINDLE | 3 | |
| PRHI01-D22640000.81 | HOLDING FIXTURE | 1 | |
| PWA 25205 | HOLDING FIXTURE | 1 | |
| PWA 25915 | HOLDING FIXTURE WITH GAGE | 2 | |
| PWA 25992 | HOLDING FIXTURE | 1 | |
| PWA 27188 | HOLDING FIXTURE | 1 | |
| PWA 27189B | HOLDING FIXTURE | 1 | |
| PWA 28678 | BLADE HOLDING FIXTURE WITH GAGE | 2 | |
| PWA 291213 | HOLDING FIXTURE WITH INDICATOR | 1 | |
| PWA 29560D | HOLDING FIXTURE | 1 | |
| PWA 32148 | HOLDING FIXTURE | 1 | |
| PWA 32293 | HOLDING FIXTURE | 1 | |
| PWA 7153 | FIXTURE OIL SCREEN HOLDING | 1 | |
| PWA 75197 | BLADE HOLDING FIXTURE | 1 | |
| PWA 85791 | HOLDING FIXTURE FOR BRG 1 | 1 | |
| PWA211682 | HOLDING FIXTURE | 1 | |
| PWA25279 | BASE - MGB OUT HYD G/SFT HOLDING_[PWA25279] | 2 | |
| PWA25287 | BASE - MGB F/P G/SFT HOLDING_[PWA25287] | 2 | |
| PWA25313 | BASE - MGB DEAERATOR G/SFT HOLDING_[PWA25313] | 2 | |
| PWA25340 | BASE - MGB REAR SCAV G/SFT HOLDING_[PWA25340] | 2 | |
| PWA25443 | FIXTURE-#1 BRG HOUSING HOLDING_[PWA25443] | 2 | |
| PWA26140 | FIXTURE HOLDING 3.0 BLEED VALVE FERRY SHIPPING | 1 | |
| PWA26394 | BASE - MGB O/P G/SFT HOLDING_[PWA26394] | 2 | |
| PWA27920 | CLAMP, HOLDING - FUEL MANIF JUMPER TUBE_[PWA27920] | 1 | |
| PWA28264 | FIXTURE, HOLDING - 1ST STG TURB VANE_[PWA28264] | 1 | |
| PWA28403 | PRATT & WHITTNEY 1ST STAGE FAN BLADE CALIBRATION STANDARD WITH HOLDING BLOCK . Includes Test Report and Certificate of Conformance. | 4 | |
| PWA72562 | HOLDING FIXTURE | 1 | |
| PWA72563 | HOLDING FIXTURE | 1 | |
| PWA81311 | FIXTURE HOLDING | 1 | |
| PWA85032 | ADAPTER, HOLDING (HPC FRONT HUB) | 1 | |
| PWA86596 | ADAPTER, HOLDING (HPC FRONT HUB) | 1 | |
| PWA86603 | ADAPTER SHOP HOLDING F/MX | 2 | |
| PWA87439 | ADAPTER, HOLDING (REFER TO TABLE 301) | 1 | |
| PWC 34913 | HOLDING FIXTURE | 14 | |
| PWC 37388 | HOLDING FIXTURE | 2 | |
| PWC-34913 | HOLDING FIX (BORESCOPE) | 14 | |
| PWC30057 | holding fixture | 3 | |
| PWC30059 | holding fixture | 4 | |
| PWC30131 | FIXTURE-HOLDING | 3 | |
| PWC30252 | Holding Fixture | 2 | |
| PWC30405 | HOLDING FIXTURE ASSY | 8 | |
| PWC30406 | holding fixture | 1 | |
| PWC30420 | Fixture Holding | 1 | |
| PWC30491 | FIXTURE-HOLDING | 2 | |
| PWC30525 | holding fixture | 2 | |
| PWC30560 | holding fixture | 1 | |
| PWC30732 | holding fixture | 4 | |
| PWC30827 | FIXTURE, HOLDING | 2 | |
| PWC31063 | Fixture holding | 2 | |
| PWC32067 | HOLDING FIXTURE | 3 | |
| PWC32125 | Holding Fixture | 4 | |
| PWC32179 | BASE, SHAFT HOLDING | 5 | |
| PWC32226 | FIXTURE-HOLDING | 3 | |
| PWC32864 | Fix. Holding Bearing | 1 | |
| PWC33260 | Fixture Holding | 4 | |
| PWC34016 | Holding Fixture | 1 | |
| PWC34045 | Holding Fixture | 2 | |
| PWC34045-1 | FIXTURE-HOLDING | 1 | |
| PWC34193 | HOLDING FIXTURE | 1 | |
| PWC34530 | Holding Fixture | 3 | |
| PWC34593 | Holding Fixture | 4 | |
| PWC34597 | Holding Fixture | 4 | |
| PWC34598 | Holding fixture | 3 | |
| PWC34599 | Holding fixture | 3 | |
| PWC34627 | Holding fixture | 1 | |
| PWC34912/PHP | FIXTURE, HOLDING | 1 | |
| PWC34913 | FIXTURE HOLDING | 14 | |
| PWC34913/PHP | BOROSCOPE HOLDING FIXTURE | 1 | |
| PWC34913E | FIXTURE, BORESCOPE HOLDING | 2 | |
| PWC34918 | BORESCOPE HOLDING FIXTURE | 1 | |
| PWC34941 | FIXTURE, HOLDING | 9 | |
| PWC37004 | Holding Fixture | 2 | |
| PWC37151 | H.P Disc Holding Fixture | 4 | |
| PWC37288 | Holding Fixture | 1 | |
| PWC37388 | Holding Fixture | 2 | |
| PWC37601 | Holding Fixture | 1 | |
| PWC37692 | Holding Fixture | 2 | |
| PWC37692 | FIXTURE HOLDING, FUEL NOZZLE | 2 | |
| PWC37811 | HOLDING FIXTURE | 1 | |
| PWC37834 | Holding Fixture | 3 | |
| PWC37880 | Holding Fixture | 1 | |
| PWC37881 | FIXTURE, HOLDING LOWER ANGLE DRIVE GEARSHAFT | 1 | |
| PWC37892 | holding fixture | 1 | |
| PWC38101 | Holding Fixture | 3 | |
| PWC38142 | Holding Fixture | 1 | |
| PWC38151 | holding fixture | 1 | |
| PWC38451 | holding fixture | 1 | |
| PWC38681 | Fixture, Holding, Second Stage Reduction Idler Gear | 1 | |
| PWC38682 | Fixture, Holding, Second Stage Reduction Idler Gear | 1 | |
| PWC40348 | HOLDING FIXTURE FRONT CASE | 1 | |
| PWC41393 | FIXTURE-HOLDING, BORESCOPE | 1 | |
| PWC42079 | Holding Fixture No. 3 bearing housing | 1 | |
| PWC43053 | Fixture Holding | 2 | |
| PWC43053-2 | Fixture, Holding | 1 | |
| PWC43053-5 | Fixture, Holding | 1 | |
| PWC45053 | HOLDING FIXTURE | 1 | |
| PWC45150 | Holding Fixture | 1 | |
| PWC45226 | HOLDING FIXTURE | 1 | |
| PWC45324 | FIXTURE, HOLDING | 1 | |
| PWC50048 | FIXTURE-HOLDING | 1 | |
| PWC50179 | holding fixture | 1 | |
| PWC50258 | holding fixture | 3 | |
| PWC50264 | holding fixture | 1 | |
| PWC50269 | HOLDING FIXTURE | 1 | |
| PWC50528 | HOLDING FIXTURE | 1 | |
| PWC50531 | Holding Fixture | 1 | |
| PWC50596 | Fixture Holding | 1 | |
| PWC50630 | FIXTURE-HOLDING | 1 | |
| PWC50727 | HOLDING FIXTURE | 1 | |
| PWC50731 | Holding Fixture | 1 | |
| PWC50883 | holding fixture | 1 | |
| PWC50939 | Holding fixture | 1 | |
| PWC51017 | holding fixture | 1 | |
| PWC51072 | holding fixture | 2 | |
| PWC51087 | HOLDING FIXTURE | 1 | |
| PWC51127 | HOLDING FIX. | 1 | |
| PWC51131 | Holding Fixture | 3 | |
| PWC51201 | holding fixture | 1 | |
| PWC51225 | FIXTURE-HOLDING | 1 | |
| PWC51499 | HOLDING, FIXTURE | 1 | |
| PWC51761 | holding fixture | 1 | |
| PWC54027 | HOLDING FIXTURE | 1 | |
| PWC54082 | ADAPTER STUB SHAFT, HOLDING ADAPTER - PR | 5 | |
| PWC54171 | holding fixture | 1 | |
| PWC54248 | HOLDING FIXTURE | 1 | |
| PWC54378 | HOLDING FIXTURE | 1 | |
| PWC54520 | FIXTURE HOLDING SHAFT | 1 | |
| PWC54576 | FIXTURE, HOLDING LH | 3 | |
| PWC54618 | holding fixture | 1 | |
| PWC54783 | FIXTURE-HOLDING | 1 | |
| PWC54788 | FIXTURE-HOLDING | 1 | |
| PWC54974 | holding fixture | 1 | |
| PWC55383 | holding fixture | 1 | |
| PWC55471 | HOLDING FIXTURE | 1 | |
| PWC55473 | HOLDING FIXTURE | 1 | |
| PWC55531 | RGB Holding Fixture | 2 | |
| PWC56343 | holding fixture | 1 | |
| PWC56344 | holding fixture | 1 | |
| PWC56346 | holding fixture | 1 | |
| PWC56927 | HOLDING FIXTURE | 1 | |
| PWC57254 | HOLDING FIXTURE | 1 | |
| PWC57391 | HOLDING FIXTURE | 1 | |
| PWC57391-3 | HOLDING FIXTURE | 1 | |
| PWC59069 | HOLDING FIXTURE | 1 | |
| PWC59073 | holding fixture | 1 | |
| PWC60158 | Holding Fixture | 1 | |
| PWC60613 | FIXTURE-HOLDING GEARSHAFT | 1 | |
| PWC62771 | FIXTURE - HOLDING | 1 | |
| PWC63158 | FIXTURE HOLDING | 1 | |
| PWC64007 | Fixture Holding | 2 | |
| PWC64199 | HOLDING FIXTURE | 1 | |
| PWC64493 | HOLDING FIXTURE | 1 | |
| PWC64589 | Fixture Holding | 1 | |
| PWC65444 | Holding Fixture | 1 | |
| PWC65590 | Fixture Holding turbine | 1 | |
| PWC66806 | HOLDING FIXTURE | 1 | |
| PWC67197 | HOLDING FIXTURE | 1 | |
| PWC67456 | Holding Fixture | 1 | |
| PWC67457 | FIXTURE, HOLDING | 1 | |
| PWC67607 | holding fixture | 1 | |
| PWC67671 | holding fixture | 1 | |
| PWC67810 | HOLDING FIXTURE | 1 | |
| PWC67868 | HOLDING FIXTURE | 1 | |
| PWC67912 | holding fixture | 1 | |
| PWC68588 | Holding fixture | 1 | |
| PWC68667 | HOLDING FIXTURE | 1 | |
| PWC68973 | Holding fixture | 1 | |
| PWC69158 | Holding fixture | 1 | |
| PWC69271 | Holding fixture | 1 | |
| PWC69274 | Holding fixture | 1 | |
| PWC69275 | Holding fixture | 1 | |
| PWC69601 | HOLDING FIXTURE | 1 | |
| PWC69657 | Holding fixture | 1 | |
| PWC69665 | Holding fixture | 1 | |
| PWC69849 | Holding fixture | 1 | |
| PWC69854 | Holding fixture | 1 | |
| PWC69861 | Holding fixture | 1 | |
| PWC70028 | HOLDING FIXT | 1 | |
| PWC70092 | Holding Fixture | 1 | |
| PWC70313 | holding fixture | 1 | |
| PWC70404 | Holding Fixture | 1 | |
| PWC70466 | holding fixture | 1 | |
| PWC70553 | holding fixture | 1 | |
| PWC70630 | Holding Fixture | 1 | |
| PWC70753 | Holding Fixture | 1 | |
| PWC70930 | FIXTURE HOLDING ROTOR | 1 | |
| PWC70955 | FIXTURE HOLDING | 3 | |
| PWC71016 | holding fixture | 1 | |
| PWC71125 | Holding Fixture | 1 | |
| PWC71304 | Holding Fixture | 1 | |
| PWC71642 | holding fixture | 1 | |
| PWC71709 | HOLDING FIXTURE | 1 | |
| PWC71732 | holding fixture | 1 | |
| PWC71776 | Fixture Holding Compressor | 3 | |
| PWC71824 | holding fixture | 1 | |
| PWC71941 | Holding Fixture | 1 | |
| PWC72107 | Holding fixture | 3 | |
| PWC72126 | LEAK TEST HOLDING FIXTURE | 1 | |
| PWC72146 | HOLDING FIXTURE | 1 | |
| PWC72247 | HOLDING BASE, FIRST STAGE CARRIER | 1 | |
| PWC72511 | HOLDING FIXTURE | 1 | |
| PWC77028 | HOLDING FIXTURE-B37 | 1 | |
| PWC77361 | HOLDING FIXTURE | 2 | |
| PWC89944 | HOLDING FIXTURE | 1 | |
| PYLZ-52251 | Holding Fixture | 1 | |
| PYLZ-52261 | Holding Fixture | 1 | |
| PYLZ-52261 PM | HOLDING FIXTURE | 1 | |
| PYLZ-53466 | HOLDING FIXTURE | 1 | |
| PYLZ-53467 | HOLDING FIXTURE | 1 | |
| Q21804 | Holding Fixture | 1 | |
| Q21804PM | HOLDING FIXTURE | 1 | |
| R46290 | HOLDING WRENCH FOR NUT | 1 | |
| RB 92700-10339-041 | HOLDING FIXTURE | 2 | |
| RB PWC34913 | Fixture, Holding | 1 | |
| RB T101365 | Holding Fixture | 2 | |
| RB T101420 | Holding Fixture | 1 | |
| RB T101508 | HOLDING FIXTURE SET, MAIN TRANSMISSION | 2 | |
| RB T101549 | Transmission Oil Cooler Holding Fixture | 1 | |
| RB T101573 | Holding Fixture | 1 | |
| RB T101596 | Holding Fixture, Quill Assembly | 1 | |
| RB T101724 | Holding Fixture | 1 | |
| RB T101727-101 | Holding Fixture | 1 | |
| RB T101883 | Holding Fixture | 2 | |
| RB T101907 | Holding Fixture | 1 | |
| RB T101972 | HOLDING FIXTURE | 3 | |
| RB T102055 | Holding Fixture Assembly | 1 | |
| RB T102069 | Holding Fixture Assembly | 1 | |
| RB T102076 | Quill Assembly Gear Holding Fixture | 3 | |
| RB T102079 | Main Input Gear Holding Fixture | 1 | |
| RB T103056 | Valve Assembly Holding Fixture Set | 1 | |
| RB T103063 | MAIN DRIVE SHAFT HOLDING TOOL | 2 | |
| RB T103147-101 | Holding Fixture | 1 | |
| RB23033031 | Fixture-Holding Front Bearing Housing | 2 | |
| RB6798037 | Fuel Nozzle Holding Fixture | 1 | |
| RB6897875 | Fuel Nozzle Holding Fixture | 3 | |
| RB92700-10339-041 | HOLDING FIXTURE, SWASHPLATE TRUNNION | 2 | |
| RBA5107-3 | Holding Fixture Input Gear "C" Model Main Rotor | 1 | |
| RBA5109-17 | Holding Fixture Output Gear "C" Model Main Rotor | 1 | |
| RBA5111-18 | Holding Fixture Output Gear "C" Model Tail Rotor | 1 | |
| RBD25121-30201 | Holding Fixture Input Gear | 1 | |
| RBD25125-30201 | Holding Fixture Output Gear | 1 | |
| RBD25430-30201 | Holding Fixture Gear Shaft Bev/Pin Output Tail Rotor | 1 | |
| RBD29822-3 & -5 | Tail Rotor Swash Plate Holding Block (-3), Wr (-5) Set 2 & 4 Bl "D,E&F" Model | 1 | |
| RBE350A93-3205-00E | Engine Gear Box Input Flange Holding Wrench | 2 | |
| RBE350A93-3205-00T | Tail Rotor Gear Box Input Flange Holding Wrench | 2 | |
| RBPWC34913 | FIXTURE, HOLDING | 1 | |
| RBT103063 | MAIN DRIVE SHAFT HOLDING TOOL | 2 | |
| RBT18801 | Tail Rotor Output Gear Holding Fixture Th55 | 1 | |
| RBT400339 | Holding Fixture | 1 | |
| RBT400341 | Holding Fixture | 1 | |
| RF2P376A0002-00 | HOLDING FIXTURE | 1 | |
| RRT050254-1 | Fixture，holding | 1 | |
| RRT101925 | Holding Fixture | 1 | |
| RTA07-5-005 | FITTING-HOLDING,FR.27 | 1 | |
| RTA07-5-006 | FITTING-HOLDING,FR.36 | 1 | |
| RTA07-5-007 | FITTING-HOLDING,FR.59LH | 1 | |
| RTA07-5-008 | FITTING-HOLDING,FR.59RH | 1 | |
| SA-1777 | HOLDING FIXTURE | 1 | |
| SA30218 | HOLDING FIXTURE | 1 | |
| SK6966-1 | TEST BOX AND HOLDING FIXTURE | 1 | |
| SPL-10544 | FIXTURE - HOLDING, LOWER TOWERSHAFT AND OIL DUCT | 1 | |
| SPL-14633 | WINGLET HOLDING FIXTURE | 1 | |
| SPL-5377 | Holding Fixture,LE Slat Actuator | 1 | |
| SPL-5427 | Holding Fixture | 1 | |
| SPL-5428 | Holding Fixture-Piston,L.E.Slat Actuator | 1 | |
| SPL-5429 | Holding Fixture | 1 | |
| SPL-5440 | Holding Fixture-Piston,L.E.Slat Actuator | 1 | |
| SPL-9359 | Fixture - Holding, MLG Actuator | 1 | |
| SPL-9361 | Fixture - Holding, MLG Actuator | 1 | |
| SPM 32-49-01 | HOLDING BLOCK FIGURE 4-16, SPM 32-49-01 MADE BY AEROFAB NDT | 1 | |
| ST6396 | HOLDING FIXTURE | 1 | |
| ST78712 | HOLDING FIXTURE | 1 | |
| ST879AF | Holding Fixture - Hand Presetting Tools, ST879A | 7 | |
| ST879AF-1 | Holding fixture for hand setting tools | 4 | |
| ST879AF-ML | HOLDING FIXTURE-HAND | 1 | |
| ST8870-7 | BOEING REFERENCE STANDARD, COMPOSITE LAMINATE STEP WEDGE( 1-10 PLY), PT 1 51-04-00, PAGE 21 FIGURE 8. SUPPLIED WITH HOLDING BLOCK | 4 | |
| ST8870-8 | BOEING REFERENCE STANDARD, COMPOSITE LAMINATE STEP WEDGE( 11-20 PLY), PT 1 51-04-00, PAGE 21 FIGURE 8. SUPPLIED WITH HOLDING BLOCK | 5 | |
| ST8870-9 | BOEING REFERENCE STANDARD, COMPOSITE LAMINATE STEP WEDGE( 21-30 PLY), PT 1 51-04-00, PAGE 19 FIGURE 8. SUPPLIED WITH HOLDING BLOCK | 4 | |
| ST8870B-7 | BOEING REFERENCE STANDARD, COMPOSITE LAMINATE STEP WEDGE WITH HOLDING PLATE. MATERIAL: BMS8-79 FIBERGLASS( 1-10 PLY), PT 1 51-04-00, PAGE 27 FIGURE 8. B737 NDT Part 1, 51-04-00. Includes C-Scan, Certification Report and Certificate of Conformance. | 3 | |
| ST8870B-8 | BOEING REFERENCE STANDARD, COMPOSITE LAMINATE STEP WEDGE WITH HOLDING PLATE. MATERIAL: BMS8-79 FIBERGLASS( 11-20 PLY), PT 1 51-04-00, PAGE 27 FIGURE 8. B737 NDT Part 1, 51-04-00. Includes C-Scan, Certification Report and Certificate of Conformance. | 3 | |
| ST8870B-9 | BOEING REFERENCE STANDARD, COMPOSITE LAMINATE STEP WEDGE WITH HOLDING PLATE. MATERIAL: BMS8-79 FIBERGLASS( 21-30 PLY), PT 1 51-04-00, PAGE 27 FIGURE 8. B737 NDT Part 1, 51-04-00. Includes C-Scan, Certification Report and Certificate of Conformance. | 3 | |
| ST8870C-7 | BOEING REFERENCE STANDARD, COMPOSITE LAMINATE STEP WEDGE WITH HOLDING PLATEBMS8-139 FIBERGLASS( 1-10 PLY), PT 1 51-04-00, PAGE 28 FIGURE 8. Includes C-Scan, Certification Report and Certificate of Conformance. | 2 | |
| ST8870C-8 | BOEING REFERENCE STANDARD, COMPOSITE LAMINATE STEP WEDGE WITH HOLDING PLATEBMS8-139 FIBERGLASS( 11-20 PLY), PT 1 51-04-00, PAGE 28 FIGURE 8. Includes C-Scan, Certification Report and Certificate of Conformance. | 2 | |
| ST8870C-9 | BOEING REFERENCE STANDARD, COMPOSITE LAMINATE STEP WEDGE WITH HOLDING PLATEBMS8-139 FIBERGLASS( 21-30 PLY), PT 1 51-04-00, PAGE 28 FIGURE 8. Includes C-Scan, Certification Report and Certificate of Conformance. | 2 | |
| ST92619 | Fixture, Holding | 1 | |
| ST93932 | BLOCK, HOLDING FIXTURE | 1 | |
| STD67658 | Holding Fixture | 1 | |
| STD67664 | Fixture Holding | 1 | |
| STD67673 | Fixture-Holding | 1 | |
| STD67674 | Holding Fixture | 1 | |
| T-193319 | Holding fixture | 1 | |
| T-21385 | Holding Fixture | 1 | |
| T-27289 | FIXTURE, HOLDING METERING VALVE ASSY PRE | 1 | |
| T-304241 | Fixture,Holding | 1 | |
| T-304245 | Holding Fixture | 1 | |
| T-304270 | Fixture,Holding | 1 | |
| T-415102 | HOLDING FIXTURE ASSY | 1 | |
| T-418655 | Fixture Holding | 1 | |
| T-429970 | Fixture-Holding | 1 | |
| T-429970PM | FIXTURE-HOLDING | 1 | |
| T-436428 | HOLDING FIXTURE | 1 | |
| T-436877 | Holding Fixture | 1 | |
| T-437800 | Fixture Holding | 1 | |
| T-437876 | Fixture Holding | 1 | |
| T-437879 | Fixture Holding | 1 | |
| T-445057 | Fixture,Holding | 1 | |
| T-445057PM | FIXTURE,HOLDING | 1 | |
| T-446877 | FIXTURE HOLDING | 1 | |
| T-448043 | Yoke,Torque Holding Fixture | 1 | |
| T-448043PM | YOKE,TORQUE HOLDING FIXTURE | 1 | |
| T-449854 | Yoke Holding Fixture | 1 | |
| T-452424 | FIXTURE, HOLDING | 1 | |
| T-6 | HOLDING FIXTURE V4V792 | 1 | |
| T-61427 | Holding Fixture | 1 | |
| T-64471 | Torque Holding Fixture | 1 | |
| T-66054 | Holding Fixture | 1 | |
| T-71036 | Holding Fixture | 1 | |
| T-71037 | Holding Fixture | 1 | |
| T-8700 | BELLOW HOLDING FIXTURE | 1 | |
| T-9320B | HOLDING FIXTURE | 1 | |
| T101307 | FLEX COUPLING HOLDING TOOL T/R M | 2 | |
| T101365 | HOLDING FIXTURE | 1 | |
| T101420 | HOLDING FIXTURE | 1 | |
| T101447 | HOLDING FIXTURE | 1 | |
| T101455 | FIXTURE, HOLDING | 1 | |
| T101499 | 206/505 MAST HOLDING FIXTURE | 1 | |
| T101508 | HOLDING FIXTURE SET, MAIN TRANSMISSION | 1 | |
| T101560 | HOLDING FIXTURE | 1 | |
| T101563 | HOLDING FIXTURE | 1 | |
| T101564 | HOLDING FIXTURE | 1 | |
| T101573 | HOLDING FIXTURE | 1 | |
| T101596 | HOLDING FIXTURE, QUILL ASSEMBLY | 1 | |
| T101883 | Holding Fixture 2pcs | 1 | |
| T101883-11 | Holding Fixture | 1 | |
| T101883-3 | Holding Fixture | 1 | |
| T101972 | HOLDING FIXTURE | 1 | |
| T102069 | HOLDING FIXTURE ASSEMBLY | 1 | |
| T102076 | QUILL ASSEMBLY GEAR HOLDING FIXTURE | 2 | |
| T103063 | MAIN DRIVE SHAFT HOLDING TOOL | 1 | |
| T103328-101 | ADAPTER, HOLDING FIX | 1 | |
| T1148 | FIXTURE, HOLDING | 1 | |
| T119200 | FIXTURE-CDU HOLDING | 1 | |
| T119295 | GIMBAL HOLDING FIXTURE | 1 | |
| T12077 | TORQUE HOLDING FIXTURE | 1 | |
| T12077B | TORQUE HOLDING FIXTURE | 1 | |
| T14-0733 | HOLDING FIXTURE | 1 | |
| T25716 | FIXTURE, HOLDING, VALVE ASSEMBLY | 1 | |
| T26789 | Fixture Holding | 1 | |
| T27260 | FIXTURE - HOLDING | 1 | |
| T27261 | Fixture Holding | 1 | |
| T27289 | Fixture, Holding Metering Valve Assy Preset | 1 | |
| T27360 | FIXTURE - HOLDING | 1 | |
| T3008129 | HOLDING FIXTURE | 1 | |
| T3015859 | HOLDING FIXTURE AND PUNCHES | 1 | |
| T304025 | FIXTURE,HOLDING,LAP | 1 | |
| T304270 | FIXTURE - HOLDING | 1 | |
| T304672 | FIXTURE HOLDING | 1 | |
| T321639 | VIBRATION AND HOLDING FIXTURE | 1 | |
| T324796 | FNC HOLDING TRAY | 1 | |
| T326392 | HIGH VOLTAGE POWER SUPPLY HOLDING FIXTURE | 1 | |
| T327604-9001 | COOLING HOLDING FIXTURE | 1 | |
| T3695-09 | FIXTURE PISTON HOLDING | 1 | |
| T3695-13 | Holding Fixture ( 4 ITEMS) | 1 | |
| T420923 | FIXTURE END PLAY HOLDING | 1 | |
| T446610 | HOLDING FIXTURE | 1 | |
| T449854 | YOKE HOLDING FIXTURE | 1 | |
| T450165 | HOLDING FIXTURE | 1 | |
| T452935 | HOLDING FIXTURE | 1 | |
| T460339 | MOTOR HOLDING FIXTURE | 1 | |
| T462168 | Bearing Holding Fixture | 1 | |
| T6 | HOLDING FIXTURE V4V792 | 1 | |
| T74334 | HOLDING FIXTURE ACTUATOR | 1 | |
| T74338 | HOLDING FIXTURE ACTUATOR | 1 | |
| T83658 | Holding Fixture And Alignment | 1 | |
| T8491 | HOLDING FIXTURE | 1 | |
| T852412 | HOLDING FIXTURE | 1 | |
| T8741 | FIXTURE-STABLE ELEVENT HOLDING | 1 | |
| T92-49034 | HOLDING FIXTURE | 1 | |
| T9249034 | HOLDING FIXTURE | 1 | |
| T9320A | HOLDING FIXTURE | 1 | |
| T9320B | HOLDING FIXTURE | 1 | |
| TA00331 | HOLDING FIXTURE | 1 | |
| TA00625 | HOLDING FIXTURE | 1 | |
| TA06018 | Holding Fixture | 1 | |
| TAF00458 | WORM GEAR HOLDING FIXTURE | 1 | |
| TB3038G001 | IGV BLADE HOLDING FIXTURE | 1 | |
| TB7006G001 | HOLDING RELIEF VALVE FIXTURE | 1 | |
| TB7007G001 | HOLDING FIXTURE | 1 | |
| TBS004 | PTI HOLDING FIXTURE SERVO ACTUATOR | 1 | |
| TD1616 | HOLDING FIXTURE | 1 | |
| TD27804 | HOLDING FIXTURE | 1 | |
| TD3017-001 | HOLDING FIXTURE FIRST STAGE ASSEMBLY | 1 | |
| TE-150944H | HOLDING FIXTURE (3 ITEMS) | 1 | |
| TE65B80308 | FIXTURE - HOLDING, CONTROL COLUMN | 1 | |
| TF-10856-1 | HOLDING FIXTURE | 1 | |
| THSA-01 | HOLDING FIXTURE (2 IT) | 1 | |
| THSA-02 | HOLDING FIXTURE (3 IT) | 1 | |
| THSA-03 | HOLDING FIXTURE (2 IT) | 1 | |
| TL5766 | FIXTURE HOLDING | 1 | |
| TM1991G001 | INSTALLATION HOLDING TOOL OF 11MU | 1 | |
| TM7670G001 | NFT FLYWEIGHT HOLDING TOOL | 1 | |
| TM7671G001 | NFT FLYWEIGHT HOLDING TOOL | 1 | |
| TMA2159 | HOLDING FIXTURE | 1 | |
| TMA2292 | HOLDING FIXTURE | 1 | |
| TP325 | TEST BOX AND HOLDING FIXTURE | 1 | |
| TSJ5-87879-1 | Holding Fixture - Control Column | 1 | |
| TSJ50-3309-2 | LEVER ASSY -0 HOLDING FIXTURE | 1 | |
| TSJ50-6875 | HOLDING FIXTURE | 1 | |
| TWA-W730074-00 | HOLDING FIXTURE | 1 | |
| TX 30492P | HOLDING FIXTURE | 1 | |
| U21895200-2 | FIXTURE FIXTURE-HOLDING FIXTURE | 3 | |
| U21978 | HOLDING FIXTURE | 2 | |
| W-1595 | HOLDING FIXTURE | 1 | |
| WF012369-01 | HOLDING FIXTURE, JIG PRESSURE TEST | 1 | |
| YA4660 | CAMSHAFT SPROCKET HOLDING TOOL | 1 | |
| lC600l | FIXTURE, HOLDING- LOW PRESSURE TURBINE ROTOR FORWA | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
