| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 135974HGW | HOLDING | 2 | |
| 56724S0101 | HOLDING | 1 | |
| F21891 | HOLDING | 1 | |
| LTCT4153 | HOLDING | 1 | |
| PWA77506 | HOLDING | 1 | |
| PWC61964 | HOLDING | 1 | |
| T45140 | HOLDING | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| PWC70955 | FIXTURE HOLDING | 3 | |
| F70320-1 | Holding Fixture - Control Column | 10 | |
| H3275538CK1 | HOLDING FIXTURE (BASE) | 1 | |
| H3275538CK1-1 | HOLDING FIXTURE (BASE) | 1 | |
| H3275538CK1-2 | HOLDING FIXTURE (BASE) | 1 | |
| (CALIB) 98A24403000000 | CABLE HOLDING STRAP | 1 | |
| (CALIB) 98D27407502000 | HOLDING FIXTURE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D47103500000 | HOLDING FIXTURE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D52003006000 | HOLDING HOLDIND-REPLACE FITTING HINGE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D71203003000 | HOLDING FIXTURE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L71203002001 | TOOL TOOL HOLDING-ENGINE MOUNTS RR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L71203009000 | THRUST LINK HOLDING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A11120 | TOOL HOLDING TOOL DRAG STY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A11126 | TOOL TOOL -HOLDING, STEERING ACTUATO (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9551001-0001 | H - STAB INSIDE FUSE HOLDING TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) F26504000 | HOLDING TOOL (CALIBRATION) | 1 | |
| (CALIB) J47310 | HOLDING TOO (CALIBRATION) | 1 | |
| (CALIB) PWC34913 | FIXTURE HOLDING | 1 | |
| 0-45245-7 | STATIC HOLDING WRENCH | 1 | |
| 0061R55434 | HOLDING FIXTURE | 1 | |
| 0110E102450-18 | FIXTURE, HOLDING ASSEMBLY | 1 | |
| 0110E102540-18 | FIXTURE HOLDING | 1 | |
| 024922-100-M2 | FIXTURE HOLDING | 1 | |
| 04-2882 | Cylinder Base Nut Wrenches (Holding capacity: 9/16") (Add to cart: Add To Cart) | 1 | |
| 04-2882-2 | Cylinder Base Nut Wrenches (Holding capacity: 9/16") (Add to cart: Add To Cart) (Holding capacity: 1/2") (Add to cart: Add To Cart) | 2 | |
| 04-2882-3 | Cylinder Base Nut Wrenches (Holding capacity: 9/16") (Add to cart: Add To Cart) (Holding capacity: 1/2") (Add to cart: Add To Cart) (Holding capacity: 5/8") (Add to cart: Add To Cart) | 1 | |
| 04-2882-4 | Cylinder Base Nut Wrenches (Holding capacity: 9/16") (Add to cart: Add To Cart) (Holding capacity: 1/2") (Add to cart: Add To Cart) (Holding capacity: 5/8") (Add to cart: Add To Cart) (Holding capacity: 3/4") (Add to cart: Add To Cart) | 1 | |
| 04-531 | Wilton® Light Industrial C-Clamps (Holding capacity: 1700 lbs) (Jaw gap: 0 - 8" (203 mm)) (Jaw reach: 4" (102 mm)) (Type: Standard) (Add to cart: Add To Cart) | 1 | |
| 04-532 | Wilton® Light Industrial C-Clamps (Holding capacity: 1700 lbs) (Jaw gap: 0 - 8" (203 mm)) (Jaw reach: 4" (102 mm)) (Type: Standard) (Add to cart: Add To Cart) (Holding capacity: 620 lbs) (Jaw gap: 0 - 1-1/2" (38 mm)) (Jaw reach: 1-1/2" (38 mm)) (Type: Sta | 1 | |
| 04-533 | Wilton® Light Industrial C-Clamps (Holding capacity: 1700 lbs) (Jaw gap: 0 - 8" (203 mm)) (Jaw reach: 4" (102 mm)) (Type: Standard) (Add to cart: Add To Cart) (Holding capacity: 620 lbs) (Jaw gap: 0 - 1-1/2" (38 mm)) (Jaw reach: 1-1/2" (38 mm)) (Type: Sta | 1 | |
| 04-543 | Wilton® Light Industrial C-Clamps (Holding capacity: 1700 lbs) (Jaw gap: 0 - 8" (203 mm)) (Jaw reach: 4" (102 mm)) (Type: Standard) (Add to cart: Add To Cart) (Holding capacity: 620 lbs) (Jaw gap: 0 - 1-1/2" (38 mm)) (Jaw reach: 1-1/2" (38 mm)) (Type: Sta | 1 | |
| 04-544 | Wilton® Light Industrial C-Clamps (Holding capacity: 1700 lbs) (Jaw gap: 0 - 8" (203 mm)) (Jaw reach: 4" (102 mm)) (Type: Standard) (Add to cart: Add To Cart) (Holding capacity: 620 lbs) (Jaw gap: 0 - 1-1/2" (38 mm)) (Jaw reach: 1-1/2" (38 mm)) (Type: Sta | 1 | |
| 04-545 | Wilton® Light Industrial C-Clamps (Holding capacity: 1700 lbs) (Jaw gap: 0 - 8" (203 mm)) (Jaw reach: 4" (102 mm)) (Type: Standard) (Add to cart: Add To Cart) (Holding capacity: 620 lbs) (Jaw gap: 0 - 1-1/2" (38 mm)) (Jaw reach: 1-1/2" (38 mm)) (Type: Sta | 1 | |
| 04-99210 | Toggle Clamps (Holding capacity: 100 lbs) (Jaw gap: 1-1/16" (27 mm)) (Jaw reach: 2-5/16") (Overall length: 6-7/8" (175 mm)) (Spindle thread: 1/4"-20) (Add to cart: Add To Cart) | 1 | |
| 04-99211 | Toggle Clamps (Holding capacity: 100 lbs) (Jaw gap: 1-1/16" (27 mm)) (Jaw reach: 2-5/16") (Overall length: 6-7/8" (175 mm)) (Spindle thread: 1/4"-20) (Add to cart: Add To Cart) (Holding capacity: 200 lbs) (Jaw gap: 1-1/16" (27 mm)) (Jaw reach: 1-1/4") (Ov | 1 | |
| 04-99215 | Toggle Clamps (Holding capacity: 100 lbs) (Jaw gap: 1-1/16" (27 mm)) (Jaw reach: 2-5/16") (Overall length: 6-7/8" (175 mm)) (Spindle thread: 1/4"-20) (Add to cart: Add To Cart) (Holding capacity: 200 lbs) (Jaw gap: 1-1/16" (27 mm)) (Jaw reach: 1-1/4") (Ov | 1 | |
| 04-99311 | Toggle Clamps (Holding capacity: 100 lbs) (Jaw gap: 1-1/16" (27 mm)) (Jaw reach: 2-5/16") (Overall length: 6-7/8" (175 mm)) (Spindle thread: 1/4"-20) (Add to cart: Add To Cart) (Holding capacity: 200 lbs) (Jaw gap: 1-1/16" (27 mm)) (Jaw reach: 1-1/4") (Ov | 1 | |
| 04-99423 | Toggle Clamps (Holding capacity: 100 lbs) (Jaw gap: 1-1/16" (27 mm)) (Jaw reach: 2-5/16") (Overall length: 6-7/8" (175 mm)) (Spindle thread: 1/4"-20) (Add to cart: Add To Cart) (Holding capacity: 200 lbs) (Jaw gap: 1-1/16" (27 mm)) (Jaw reach: 1-1/4") (Ov | 1 | |
| 04-99433 | Toggle Clamps (Holding capacity: 100 lbs) (Jaw gap: 1-1/16" (27 mm)) (Jaw reach: 2-5/16") (Overall length: 6-7/8" (175 mm)) (Spindle thread: 1/4"-20) (Add to cart: Add To Cart) (Holding capacity: 200 lbs) (Jaw gap: 1-1/16" (27 mm)) (Jaw reach: 1-1/4") (Ov | 1 | |
| 04-99443 | Toggle Clamps (Holding capacity: 100 lbs) (Jaw gap: 1-1/16" (27 mm)) (Jaw reach: 2-5/16") (Overall length: 6-7/8" (175 mm)) (Spindle thread: 1/4"-20) (Add to cart: Add To Cart) (Holding capacity: 200 lbs) (Jaw gap: 1-1/16" (27 mm)) (Jaw reach: 1-1/4") (Ov | 1 | |
| 04-99473 | Toggle Clamps (Holding capacity: 100 lbs) (Jaw gap: 1-1/16" (27 mm)) (Jaw reach: 2-5/16") (Overall length: 6-7/8" (175 mm)) (Spindle thread: 1/4"-20) (Add to cart: Add To Cart) (Holding capacity: 200 lbs) (Jaw gap: 1-1/16" (27 mm)) (Jaw reach: 1-1/4") (Ov | 1 | |
| 04-99483 | Toggle Clamps (Holding capacity: 100 lbs) (Jaw gap: 1-1/16" (27 mm)) (Jaw reach: 2-5/16") (Overall length: 6-7/8" (175 mm)) (Spindle thread: 1/4"-20) (Add to cart: Add To Cart) (Holding capacity: 200 lbs) (Jaw gap: 1-1/16" (27 mm)) (Jaw reach: 1-1/4") (Ov | 1 | |
| 04-99493 | Toggle Clamps (Holding capacity: 100 lbs) (Jaw gap: 1-1/16" (27 mm)) (Jaw reach: 2-5/16") (Overall length: 6-7/8" (175 mm)) (Spindle thread: 1/4"-20) (Add to cart: Add To Cart) (Holding capacity: 200 lbs) (Jaw gap: 1-1/16" (27 mm)) (Jaw reach: 1-1/4") (Ov | 1 | |
| 04-99503 | Toggle Clamps (Holding capacity: 100 lbs) (Jaw gap: 1-1/16" (27 mm)) (Jaw reach: 2-5/16") (Overall length: 6-7/8" (175 mm)) (Spindle thread: 1/4"-20) (Add to cart: Add To Cart) (Holding capacity: 200 lbs) (Jaw gap: 1-1/16" (27 mm)) (Jaw reach: 1-1/4") (Ov | 1 | |
| 04-99513 | Toggle Clamps (Holding capacity: 100 lbs) (Jaw gap: 1-1/16" (27 mm)) (Jaw reach: 2-5/16") (Overall length: 6-7/8" (175 mm)) (Spindle thread: 1/4"-20) (Add to cart: Add To Cart) (Holding capacity: 200 lbs) (Jaw gap: 1-1/16" (27 mm)) (Jaw reach: 1-1/4") (Ov | 1 | |
| 04-99523 | Toggle Clamps (Holding capacity: 100 lbs) (Jaw gap: 1-1/16" (27 mm)) (Jaw reach: 2-5/16") (Overall length: 6-7/8" (175 mm)) (Spindle thread: 1/4"-20) (Add to cart: Add To Cart) (Holding capacity: 200 lbs) (Jaw gap: 1-1/16" (27 mm)) (Jaw reach: 1-1/4") (Ov | 1 | |
| 04-99543 | Toggle Clamps (Holding capacity: 100 lbs) (Jaw gap: 1-1/16" (27 mm)) (Jaw reach: 2-5/16") (Overall length: 6-7/8" (175 mm)) (Spindle thread: 1/4"-20) (Add to cart: Add To Cart) (Holding capacity: 200 lbs) (Jaw gap: 1-1/16" (27 mm)) (Jaw reach: 1-1/4") (Ov | 1 | |
| 04-99553 | Toggle Clamps (Holding capacity: 100 lbs) (Jaw gap: 1-1/16" (27 mm)) (Jaw reach: 2-5/16") (Overall length: 6-7/8" (175 mm)) (Spindle thread: 1/4"-20) (Add to cart: Add To Cart) (Holding capacity: 200 lbs) (Jaw gap: 1-1/16" (27 mm)) (Jaw reach: 1-1/4") (Ov | 1 | |
| 04-99563 | Toggle Clamps (Holding capacity: 100 lbs) (Jaw gap: 1-1/16" (27 mm)) (Jaw reach: 2-5/16") (Overall length: 6-7/8" (175 mm)) (Spindle thread: 1/4"-20) (Add to cart: Add To Cart) (Holding capacity: 200 lbs) (Jaw gap: 1-1/16" (27 mm)) (Jaw reach: 1-1/4") (Ov | 1 | |
| 04-99573 | Toggle Clamps (Holding capacity: 100 lbs) (Jaw gap: 1-1/16" (27 mm)) (Jaw reach: 2-5/16") (Overall length: 6-7/8" (175 mm)) (Spindle thread: 1/4"-20) (Add to cart: Add To Cart) (Holding capacity: 200 lbs) (Jaw gap: 1-1/16" (27 mm)) (Jaw reach: 1-1/4") (Ov | 1 | |
| 0S22934 | TOOL HOLDING | 1 | |
| 0S22964D | HOLDING TOOL | 1 | |
| 0U 145410 | GEAR BOX HOLDING TOOL | 1 | |
| 0U 190822 | T.H.S.A. HOLDING FIXTURE | 1 | |
| 0U132296 | HOLDING-TOOL | 1 | |
| 0U142206 | HOLDING ASSEMBLY | 1 | |
| 0U142220 | HOLDING ASSEMBLY | 1 | |
| 0U142574 | HOLDING FIXTURE | 1 | |
| 0U144768 | HOLDING WRENCH - AILERON SERVOCONTROL ADJUSTMENT | 11 | |
| 0U144928 | HOLDING TOOL | 1 | |
| 0U144972 | HOLDING FIXTURE | 1 | |
| 0U145410 | TOOL-GEAR BOX HOLDING | 1 | |
| 0U190822 | THSA HOLDING FIXTURE | 1 | |
| 0U300129 | HOLDING TOOL | 1 | |
| 0U300438 | POSITIONING AND HOLDING TOOL | 1 | |
| 0U300441 | HOLDING BRACKET | 1 | |
| 0U300699 | HOLDING SUPPORT | 1 | |
| 0U301010 | HOLDING BUSH | 1 | |
| 0U301036 | LVDT HOLDING TOOL | 1 | |
| 0U301037 | LVDT HOLDING | 1 | |
| 0U301038 | LVDT HOLDING | 1 | |
| 0U301039 | LVDT HOLDING | 1 | |
| 1-2607948 | HOLDING BLOCK | 1 | |
| 1-2609502-1 | HOLDING BLOCK | 1 | |
| 1-2609932-1 | HOLDING BLOCK | 1 | |
| 1-2615480 | HOLDING BLOCK | 1 | |
| 1-2616849 | HOLDING BLOCK | 1 | |
| 100-52754 | Fixture Holding | 1 | |
| 100000-S96-3 | HOLDING FIXTURE PIN REMOVAL – MANIFOLD | 1 | |
| 1001246-HFP | PIN HOLDING FIXTURE | 1 | |
| 10108 | A350 VERTICAL SUPPORT TO HOLD THE HOLDING FIXTURE IN VERTICAL POSITION | 1 | |
| 101061 | Holding Block Housing Assy. | 2 | |
| 10260-BASE | HOLDING FIXTURE ASSEMBLY DISSESAMBLY (2IT) | 1 | |
| 106-1-3008 | HOLDING FIXTURE | 1 | |
| 106-1-3404 | HOLDING FIXTURE | 1 | |
| 109011105101E318A | HOLDING FIXTURE GRIP REWORK PART | 1 | |
| 11-7225 | GAP HOLDING FIXTURE | 1 | |
| 11-7226 | GAP HOLDING FIXTURE | 1 | |
| 11-8465 | TOOL HOLDING | 2 | |
| 1106470-2 | HOLDING FIXTURE | 1 | |
| 1107261HF1 | HOLDING FIXTURE | 1 | |
| 114-1045 | Holding tool for outer half | 1 | |
| 114-1060 | Holding tool for outer half | 1 | |
| 114-1061 | Holding tool for inner half | 1 | |
| 114-1101 | Holding tool for torque plate bushing removal/installation | 1 | |
| 114-1280 | HOLDING TOOL | 3 | |
| 114-1281 | HOLDING TOOL | 3 | |
| 114-1282 | HOLDING TOOL | 3 | |
| 114-1283 | HOLDING TOOL | 3 | |
| 114-1369 | Holding tool for inner half | 1 | |
| 114-1572 | HOLDING TOOL | 3 | |
| 114-1573 | HOLDING TOOL | 3 | |
| 114-1574 | HOLDING TOOL | 3 | |
| 114-1575 | HOLDING TOOL | 3 | |
| 114-350 | Outer Half wheel holding tool | 1 | |
| 114-351 | Inner Half wheel holding tool | 1 | |
| 114-454 | Outer Half wheel holding tool | 1 | |
| 114-455 | Inner Half wheel holding tool | 1 | |
| 11456 | Holding Valve Under Test | 1 | |
| 118351 | HOLDING BLOCK | 1 | |
| 11MIT65B01221-4 | HOLDING WRENCH - METERING ROD ANCHOR TUBE, NOSE LANDING GEAR | 1 | |
| 120C400SLN | POWER UNIT ELECTRICAL (TRILECTRON INDUSTRIES, INC. (DIV. GSE HOLDINGS INC)) | 1 | |
| 123T12 | MIRROR HOLDING FIXTURE | 1 | |
| 13254 | HOLDING TOOL | 1 | |
| 14300 | WILTON® HI-VIS SAFETY C-CLAMPS HOLDING CAPACITY: 3500 LBS | 1 | |
| 137726 | HOLDING TUBE | 1 | |
| 13083230 | HOLDING FIXTURE, ASS | 1 | |
| 135974HGW | HOLDING TOOL | 2 | |
| 139W00-542-01 | HOLDING PLATE (FOR BENDING TOOL) | 1 | |
| 14-6896-6000 | Tool, Mlg Holding | 3 | |
| 1561240AT1 | HOLDING FIXTURE | 1 | |
| 1610000F13 | HOLDING FIXTURE | 1 | |
| 1610000F19 | HOLDING FIXTURE | 1 | |
| 16A11193-3 | FIXTURE ASSY, HOLDING - RIB/SPAR, BL 71, LH | 1 | |
| 16A11194-3 | FIXTURE ASSY, HOLDING - RIB/SPAR, BL 71, RH | 1 | |
| 16A11195-3 | FIXTURE ASSY, HOLDING - RIB/SPAR, EL 120, LH | 1 | |
| 16A11196-3 | FIXTURE ASSY, HOLDING - RIB/SPAR, EL 120, RH | 1 | |
| 16A14229L1-1 | HOLDING ISA RIGGING | 1 | |
| 16A14257L1-1 | HOLDING RUDDER | 1 | |
| 16ADA27807 | GSC HOLDING FIXTURE | 1 | |
| 1705900-F800 | HOLDING TOOL (4IT) | 1 | |
| 1722A35 | SPRING CLIP HOLDING CAP. DIA. 5/8-1"1/4 WHITE PLASTIC-COATED STEEL | 1 | |
| 1778050-2 | HOLDING FIXTURE | 1 | |
| 17G230022-1 | TR FAN DUCT HOLDING FIXTURE | 1 | |
| 18-5600-1 | HOLDING FIXTURE | 1 | |
| 181K183 | HOLDING CLAMP | 1 | |
| 181SK183 | HOLDING CLAMP | 1 | |
| 18903470000 | HOLDING FIXTURE | 1 | |
| 18903480000 | HOLDING FIXTURE KIT | 1 | |
| 18C1028 | FIXTURE, TEST/HOLDING - NO 5 BRG HOUSING | 1 | |
| 18C1508 | FIXTURE, HOLDING - NO. 1 BEARING AFT INNER RACE | 1 | |
| 190822 | THSA HOLDING FIXTURE | 1 | |
| 1900134 | VALVE HOLDING FIXTURE | 1 | |
| 1900210 | HOLDING FIXTURE | 1 | |
| 1900541A | HOLDING FIXTURE | 1 | |
| 1900652 | End Bell Holding Tool | 1 | |
| 1900664 | Holding Fixture | 1 | |
| 1900830 | HOLDING BOLTS | 1 | |
| 1900854 | DRIVE SHAFT HOLDING FIXTURE | 1 | |
| 1901073 | EMP VALVE BLOCK HOLDING TOOL | 1 | |
| 1C6001 | FIXTURE, HOLDING- LOW PRESSURE TURBINE ROTOR FORWA | 1 | |
| 1C6276 | STAGE 4, SEAL HOLDING FIXTURE | 1 | |
| 1C6277 | STAGE 5, SEAL HOLDING FIXTURE | 1 | |
| 1C6278 | STAGE 6, SEAL HOLDING FIXTURE | 1 | |
| 1C6896 | FIXTURE, HOLDING - PTR TO TRF | 1 | |
| 1C6896G01 | FIXTURE, HOLDING - PTR TO TRF | 1 | |
| 1C6908 | FIXTURE, HOLDING - COMPRESSOR | 1 | |
| 1C6908G01 | FIXTURE, HOLDING - COMPRESSOR | 1 | |
| 1C6996 | FIXTURE, HOLDING, POWER TURBINE ROTOR | 1 | |
| 1J12414 | Block, Holding | 1 | |
| 1X46175575 | HOLDING DEVICE | 1 | |
| 2-2607948 | HOLDING BLOCK | 1 | |
| 2-2609502-1 | HOLDING BLOCK | 1 | |
| 2-2609932-1 | HOLDING BLOCK | 1 | |
| 2-2615480 | HOLDING BLOCK | 1 | |
| 2-2616849 | HOLDING BLOCK | 1 | |
| 2023-0101W01 | HOLDING FIXTURE | 1 | |
| 2024177-1 | Torque Wrench Holding Fixture | 1 | |
| 2024841-1 | Holding Fixture | 1 | |
| 2024985-1 | Test Holding Fixture | 1 | |
| 2025201-1 | HOLDING TOOL | 1 | |
| 2025201-1PM | HOLDING TOOL | 1 | |
| 2025581-1 | HOLDING FIXTURE | 1 | |
| 20306 | WILTON® ECONOMY C-CLAMPS HOLDING CAPACITY: 8000 | 1 | |
| 2025577 | HOLDING FIXTURE | 1 | |
| 204-040-009-1 | HOLDING FIXTURE | 1 | |
| 204-040-360-3--PAT-1D | HOLDING TOOL | 1 | |
| 204-040-366-3A5A-1-6D | HOLDING FIXTURE | 1 | |
| 204-0440-001-17PAT-I | XNSN HOLDING TOOL | 1 | |
| 2040156-0501 | HOLDING FIXTURE | 1 | |
| 206-240-002-101 | HOLDING FIXTURE, MAST | 1 | |
| 207SFRH | WRENCH CROWFOOT (IDSC HOLDING LLC, DBA SNAP-ON INDUSTRIAL DIV) | 2 | |
| 211FCO | WRENCH CROWFOOT (IDSC HOLDING LLC, DBA SNAP-ON INDUSTRIAL DIV) | 1 | |
| 212-040-001-3GIF-ID2 | HOLDING TOOL | 1 | |
| 21463-T200 | HOLDING FIXTURE | 1 | |
| 21463−T200 | HOLDING FIXTURE | 1 | |
| 219000F1 | HOLDING FIXTURE | 1 | |
| 21C7194G01 | VERTICAL HOLDING FIXTURE P.T. | 1 | |
| 21C7406P01 | FIXTURE, HOLDINGSEAL | 1 | |
| 21C7411G01 | STAND, HOLDING, BLADE | 1 | |
| 21C7743G01 | ADAPTER, HOLDING | 1 | |
| 21C7872G01 | STAND , PT MODULE HOLDING | 1 | |
| 21C8100G01 | FRONT FRAME HOLDING | 1 | |
| 21C8139G02 | FAN CASE HOLDING | 1 | |
| 21C8284G01 | FIXTURE, LPT MODULE ASSEMBLY HOLDING | 1 | |
| 21C8861G01 | FIXTURE, HOLDING, TORQUE - MOUNT, ENGINE FRONT | 1 | |
| 22282-T200 | HOLDING FIXTURE ASSEMBLY | 2 | |
| 22282T200 | HOLDING FIXTURE | 2 | |
| 22479T200 | HOLDING FIXTURE | 1 | |
| 22617-T200 | HOLDING FIXTURE | 3 | |
| 22617T200 | Holding Fixture | 3 | |
| 22617T200 PM | HOLDING FIXTURE | 1 | |
| 228896 | HOLDING TOOL | 1 | |
| 23008710 | FIXTURE----HOLDING GAS PRODUCER ROTOR | 3 | |
| 23033031 | FIXTURE--HOLDING, FRONT BEARING HOUSING 7 | 1 | |
| 23033043 | FIXTURE--HOLDING, SERIES II 4TH STAGE NOZZLE | 1 | |
| 23037982 | FIXTURE--HOLDING, COMPRESSOR FIRST-, SECOND-, THIRD-, AND FOURTH-STAGE VANE ASSEMBLY | 1 | |
| 23052541 | Fixture – Holding, Inner Gas Generator Case Assembly | 1 | |
| 23054785 | Plate – Holding, LP Turbine Rotor 1st Stage Assembly | 1 | |
| 23055763 | Fixture – Holding, Turbine Wheel Assembly Grind Fixture | 1 | |
| 23055805 | Fixture – Holding Forward Yoke, Pull Test | 1 | |
| 23058496 | Fixture – Compressor Case, Lathe Holding | 1 | |
| 23058496-2 | FIXTURE – COMPRESSOR CASE, LATHE HOLDING | 1 | |
| 23058497 | Adapter – Compressor Forward Shaft Holding | 1 | |
| 23063520 | Fixture – Holding, Rear Stationary Seal | 1 | |
| 23066532 | Fixture – Holding, Center Sump Housing FWD | 1 | |
| 2311M84-904 | Worm Holding Fixture | 1 | |
| 23278T202 | Holding Fixture | 1 | |
| 23278T203 | Holding Fixture | 1 | |
| 23555F2 | Holding Fixture | 1 | |
| 23611T1 | Holding Fixture | 1 | |
| 23730T200 | FIXTURE HOLDING | 1 | |
| 23730T200 | Holding Fixture | 1 | |
| 23734T200 | FIXTURE HOLDING | 1 | |
| 23734T200 | Holding Fixture | 1 | |
| 23747T200 | FIXTURE HOLDING | 1 | |
| 23747T200 | Holding Fixture | 1 | |
| 23747T201 | FIXTURE HOLDING | 1 | |
| 240300LAT1-101 | HOLDING BLOCK | 1 | |
| 24599T200 | Holding Fixture | 1 | |
| 247C5168 | FIXTURE, HOLDING - ACTUATING SYSTEM (LMS100) | 1 | |
| 25219T1 | FIXTURE HOLDING | 1 | |
| 25333T1 | FIXTURE HOLDING | 1 | |
| 254A1150-TT | HOLDING TEST FIXTURE | 1 | |
| 2550066 | HOLDING TOOL | 1 | |
| 2550144 | Fixture, holding, drive body | 2 | |
| 2550146 | Fixture, holding, weight table | 3 | |
| 2557866 | Shuttle Valve Bleed Holding Fixture | 1 | |
| 2561508 | Holding Fixture | 1 | |
| 2561522 | Holding Nest | 1 | |
| 2561523 | Holding Fixture | 1 | |
| 2561697 | Fixture, bellows holding | 1 | |
| 256A3310-7HF | HOLDING FIXTURE (2IT) | 1 | |
| 256T2151-11-HF | BUSHING HOLDING FIXTURE (3 IT) | 1 | |
| 25Y1315A | OVERHAUL MLG HOLDING FIXTURE | 1 | |
| 25Y1319A | FIXTURE - HOLDING | 1 | |
| 26015080-101 | HOLDING FIXTURE ASSEMBLY | 1 | |
| 26015080-102 | HOLDING FIXTURE ASSEMBLY | 1 | |
| 26015080-202 | HOLDING FIXTURE ASSEMBLY | 1 | |
| 26122-AF1 | INLET COVER HOLDING FIXTURE | 1 | |
| 26122AF1 | INLET COVER HOLDING FIXTURE | 1 | |
| 26145AT1 | HOLDING FIXTURE | 1 | |
| 26616-AF1 | PORT CAP HOLDING FIXTURE | 1 | |
| 266500TF1 | HOLDING TEST FIXTURE (WP 0014 00, TABLE 1, ITEM 13) | 1 | |
| 266700TFI | HOLDING PLATE, HYD | 1 | |
| 26719AF1 | HOLDING FIXTURE | 1 | |
| 269T3320 | Upper Pulley Hub Holding Tool | 1 | |
| 269T3320P | UPPER PULLEY HUB HOLDING TOOL | 1 | |
| 270-5510 | HOLDING FIXTURE | 1 | |
| 2700187LAT3 | Holding Fixture | 1 | |
| 272663 | TORQUE WRENCH HOLDING FIXTURE | 1 | |
| 274000AT4 | ASSEMBLY HOLDING FIXTURE | 1 | |
| 274040AT1 | ACTUATOR ASSEMBLY HOLDING FIXTURE | 1 | |
| 277-1T1 | TOOL, COMPRESSOR HOLDING CLAMP | 1 | |
| 278-1T6 | COMPRESSOR HOLDING CLAMP | 1 | |
| 289499-1 | ADAPTER HOLDING AND TORQUING | 1 | |
| 289639-1 | WRENCH,HOLDING,SHAFT ASSEMBLY | 2 | |
| 2896391 | WRENCH-HOLDING,STARTER G/SHAFT ASSY | 2 | |
| 289766-1 | SHAFT HOLDING WRENCH | 1 | |
| 289891-2 | PACKING-HOLDING BAKING | 1 | |
| 291349-1 | WRENCH GEAR SHAFT HOLDING | 1 | |
| 293733-1 | HOLDING AND PRESS FIXTURE | 1 | |
| 293824-1 | BORING MACHINE GEAR BOX HOLDING FIXTURE | 1 | |
| 2938A0400-01 | HOLDING FIXTURE | 1 | |
| 294123-1 | COMPRESSOR WHEEL HOLDING FIXTURE | 1 | |
| 294436-1 | TAILPIPE HOLDING FIXTURE | 1 | |
| 294527-1 | FIXTURE SEAL, HOLDING | 1 | |
| 296395-1 | STATOR ASSEMBLY HOLDING FIXTURE | 1 | |
| 298106-1 | HOLDING&INDEXING FIXTURE ASSY | 1 | |
| 298106-2 | HOLDING & INDEXING FIXTURE ASSY | 1 | |
| 298251-1 | HOLDING FIXTURE | 1 | |
| 2C14104G01 | FIXTURE, HOLDING - NO.4 BRG AFT INNER RACE | 3 | |
| 2C14722G01 | FIXTURE - RUNOUT HOLDING | 4 | |
| 2C14762G01 | FIXTURE, HOLDING ‐ ROTOR/STATOR LPT ‐ SPLIT ENGINE | 1 | |
| 2C14783G03 | HOLDING FIXTURE | 1 | |
| 2C6018 | TOOL SET, HOLDING - VARIABLE STATOR VAN | 1 | |
| 2C6018 REV NC | TOOL SET, HOLDING - VARIABLE STATOR VAN | 1 | |
| 2C6018G01 | TOOL SET,HOLDING-VARIABLE STATOR VANE | 4 | |
| 2C6259 | VANE HOLDING FIXTURE SET | 1 | |
| 2C6259G04 | VANE HOLDING FIXTURE SET | 1 | |
| 2C6259G05 | FIXTURE, HOLDING - VARIABLE STATOR ARMS, | 1 | |
| 2C6517G01 | WRENCH, HOLDING-HPT ROTOR | 1 | |
| 2C6549 | FIXTURE, HOLDING - | 1 | |
| 2C6549G01 | FIXTURE, HOLDING-COMPRESSOR | 1 | |
| 2C6620 | TOOL, HOLDING - | 1 | |
| 2C6620G01 | TOOL, BOLT HOLDING ( | 1 | |
| 2C6807G01 | LPTR TRF HOLDING FIXT. | 1 | |
| 2C6870 | FIXTURE, HOLDING STG. I LOW PRESS. TURB. BLADE FMF 2C686I | 1 | |
| 2C6870 REV A | FIXTURE, HOLDING STG. I LOW PRESS. TURB. BLADE FMF 2C686I | 1 | |
| 2C6871 | FIXTURE, HOLDING STG. 2 LOW PRESS. TURB. BLADE FMF 2C686I | 1 | |
| 2C6871 REV A | FIXTURE, HOLDING STG. 2 LOW PRESS. TURB. BLADE FMF 2C686I | 1 | |
| 2C6872 | FIXTURE, HOLDING STG. 3 LOW PRESS. TURB. BLADE FMF 2C686I | 1 | |
| 2C6872 REV A | FIXTURE, HOLDING STG. 3 LOW PRESS. TURB. BLADE FMF 2C686I | 1 | |
| 2C6873 | FIXTURE, HOLDING STG. 4 LOW PRESS. TURB. BLADE FMF 2C686I | 1 | |
| 2C6873 REV A | FIXTURE, HOLDING STG. 4 LOW PRESS. TURB. BLADE FMF 2C686I | 1 | |
| 2C687I | FIXTURE, HOLDING STG. 2 LOW PRESS. TURB. BLADE FMF 2C686I | 1 | |
| 2C7144 | FOXTURE,HOLDING-COMPRESSOR ROT | 1 | |
| 2C7144G01 | FOXTURE,HOLDING-COMPRESSOR ROT | 1 | |
| 2C7145 | FIXTURE,HOLDING-COMPRESSOR ROT | 1 | |
| 2C7145G01 | FIXTURE,HOLDING-COMPRESSOR ROT | 1 | |
| 2C7146 | FIXTURE,HOLDING-NO.4R BEARING | 1 | |
| 2C7146G01 | FIXTURE,HOLDING-NO.4R BEARING | 1 | |
| 2C7147G02 | FIXTURE, HOLDING, ROT AIR SEAL, NO. 4 BEARING | 1 | |
| 2C7147P02 | FIXTURE, HOLDING, ROT AIR SEAL, NO. 4 BEARING | 1 | |
| 2C7148G03 | Fixture, Holding, Nut, Seal, No. 4R Brg | 1 | |
| 2C7149 | FIXTURE,HOLDING-NO.4R BEAR SEA | 1 | |
| 2C7149G01 | Fixture, Holding, Air Vent Seal, No. 4R Brg | 1 | |
| 2C7149G01 | FIXTURE,HOLDING-NO.4R BEAR SEA | 1 | |
| 2C7283G04 | FIXTURE, HOLDING - J | 1 | |
| 2C7399 | FIXTURE, HOLDING - FAN BLADE STG. 1 | 1 | |
| 2C7399 REV C | FIXTURE, HOLDING - FAN BLADE STG. I | 1 | |
| 2C7789G01 | HOLDING FIXTURE | 1 | |
| 2C81041 | FIXTURE, HOLDING/SHIPPING - HP | 1 | |
| 2C81041G01 | FIXTURE, HOLDING/SHIPPING - HP | 1 | |
| 2C81041G02 | FIXTURE − HOLDING, SHIPPING, HPT MODULE | 1 | |
| 2C81225 | FIXTURE, HOLDING HPC STATOR | 1 | |
| 2C81225G01 | FIXTURE, HOLDING, HPC STATOR | 1 | |
| 2C81305G01 | FIXTURE, HOLDING - STAGE 2 NOZZLE | 1 | |
| 2C81431G01 | FIXTURE, HOLDING - HPT ROTOR | 1 | |
| 2C81801 | FIXTURE, HOLDING GENERAL PURP | 1 | |
| 2C81801G01 | FIXTURE HOLDING - GENERAL PURPOSE | 1 | |
| 2C90715G01 | FIXTURE, GG ROTOR DROP CHECK HOLDING | 1 | |
| 2C91097G01 | FIXTURE - OIL TANK HOLDING | 1 | |
| 2C91137G01 | FIXTURE-HOLDING FAN DISK | 1 | |
| 2C91186G01 | FIXTURE-HOLDING LPT | 1 | |
| 2C91288P01 | FIXTURE - HOLDING - TRANSITION CASING | 1 | |
| 2C91354 | FIXT, HOLDING-SENSOR BYPASS FILTER, OIL | 1 | |
| 2C91354-G01 | HOLDING FIXTURE | 5 | |
| 2C91354G01 | Holding Fixture − Oil Filter By− Pass Sensor (Alternate) | 5 | |
| 2C91354G02 | Holding Fixture − Oil Filter By− Pass Sensor (Recommended) | 10 | |
| 2ME65B00162 | TOOL - HOLDING, TORSION LINK (NLG) | 6 | |
| 2MIT65B00161-1 | HOLDING WRENCH SET - LANDING GEAR BOLTS | 5 | |
| 2MIT65B00161-6 | HOLDING WRENCH | 1 | |
| 2MIT65B01231-1 | PISTON HOLDING | 1 | |
| 3011570CF1 | HOLDING FIXTURE | 1 | |
| 30131 | HOLDING FIXTURE | 1 | |
| 3021520-6 | HOLDING FIXTURE | 1 | |
| 3042000F22 | Holding Fixture | 1 | |
| 3042000F24 | Holding Fixture | 1 | |
| 3042031F11 | Holding Fixture | 1 | |
| 3065A0000-01 | HOLDING FIXTURE | 1 | |
| 30827 | HOLDING FIXTURE | 1 | |
| 30R0338G01 | (RT) FIXTURE, HOLDING | 1 | |
| 3120A0000-01 | HOLDING FIXTURE | 1 | |
| 3170014-1 | NOSE STRUT HOLDING FIXTURE | 1 | |
| 32-01052-1F1 | FIXTURE, HOLDING | 1 | |
| 32-01055-1F1 | FIXTURE, HOLDING | 1 | |
| 321A96-0060-01 | DAMPERHOLDING FRAME | 1 | |
| 324425-A | VALVE TEST HOLDING FIXTURE (2 IT) | 1 | |
| 3268792-HF | HOLDING FIXTURE | 1 | |
| 326975-A | VALVE TEST HOLDING FIXTURE (2 IT) | 1 | |
| 330A93-2031-00 | TOOL,HOLDING | 1 | |
| 330A98-2167-01 | TOOL,HOLDING | 1 | |
| 330A98-2187-01 | TOOL,HOLDING EYE BOLT | 1 | |
| 330A98-3348-01 | HOLDING FIXTURE | 1 | |
| 332A93-3119-00 | TOOL,SPINDLE HOLDING FIXTURE | 1 | |
| 332A93-3234-00 | HOLDING WRENCH, ROTOR BRAKE | 1 | |
| 332A93323400 | HOLDING WRENCH ROTOR BRAKE | 1 | |
| 332A94-2720-00 | DAMPER HOLDING FRAME (REF ICO 92-41-00-01-100) | 1 | |
| 3402774-1 | TOOL TURNBUCKLE HOLDING | 1 | |
| 3474K75 | MOBILE HOLDING OVEN | 1 | |
| 350A93-3205-00 | MGB Input Lock Wrench/Holding Fixture | 2 | |
| 350A93-3205-00E | ENGINE GEAR BOX INPUT FLANGE HOLDING WRENCH | 1 | |
| 350A93-3205-00T | TAIL ROTOR GEAR BOX INPUT FLANGE HOLDING WRENCH | 1 | |
| 350A93-3302-01 | T/R Hub Holding Fixture - Yoke Restraint | 1 | |
| 350A93-3302-02 | T/R YOKE HOLDING FIXTURE | 1 | |
| 350A93-331 1-00 | HOLDING BUSH SPIDER | 1 | |
| 350A93-3311-00 | HOLDING BUSH SPIDER | 1 | |
| 350A96-3700-26 | HOLDING CUP | 1 | |
| 350A96370026 | HOLDING CUP | 1 | |
| 360A93-3201-01 | FLANGE HOLDING TOOL | 1 | |
| 360A93-3207-00 | FLANGE HOLDING WRENCH | 1 | |
| 360A93-3207-00/PHP | FLANGE HOLDING WRENCH | 1 | |
| 360A93-3221-00 | WRENCH MGB FAN HOLDING | 1 | |
| 360A93-3221-00/PHP | WRENCH MGB FAN HOLDING | 1 | |
| 360A93320700 | FLANGE HOLDING WRENCH | 1 | |
| 360A93322100 | WRENCH MGB FAN HOLDING | 1 | |
| 365A93-3341-00 | HOLDING ADAPTER | 1 | |
| 365A93-3341-00/PHP | HOLDING ADAPTER | 1 | |
| 365A93-5440-01 | ARRIEL ENGINE HOLDING TOOL | 1 | |
| 365A93-5440-01/PHP | TOOL, ARRIEL ENGINE HOLDING | 1 | |
| 365A93544001 | TOOL ARRIEL ENGINE HOLDING | 1 | |
| 365A93544001/PHP | ARRIEL ENGINE HOLDING TOOL | 1 | |
| 369029822-3 | PITCH CONTROL ASSY HOLDING BLOCK | 1 | |
| 369A5107-3 | HOLDING FIXTURE INPUT GEAR "C" MODEL MAIN ROTOR | 1 | |
| 369A9822-3 | Pitch Control Holding Blcok | 1 | |
| 369D29822-3 | TAIL ROTOR SWASH PLATE HOLDING BLOCK | 1 | |
| 369D29915 | OUTPUT GEARSHAFT HOLDING FIXTURE | 1 | |
| 369R1820-PHF1 | HOLDING BLOCK, PITCH CONTROL ASSEMBLY | 1 | |
| 3738 | STARTER SHAFT HOLDING TOOL | 5 | |
| 3791115-1 | Torque Holding Fixture | 1 | |
| 3791128-1 | HOLDING FIXTURE | 1 | |
| 3791336-1 | Wheel holding fixture | 1 | |
| 3800022LAT1 | Holding Fixture | 1 | |
| 381844AT1 | Holding Fixture | 1 | |
| 381900AT2-103 | HOLDING FIXTURE | 1 | |
| 3831111LAT1 | Holding Fixture | 1 | |
| 3938079 | HOLDING CLAMP | 1 | |
| 3A3150-1 | TOOL, REGULATOR HOLDING | 1 | |
| 3A3150-4 | HOLDING TOOL | 1 | |
| 3MIT65B04308-1 | HOLDING WRENCH - BELLCRANK, CARGO DOOR | 1 | |
| 3S81071-101 | FIXTURE ASSEMBLY HOLDING CORE HONEYCOMB REPAIR | 1 | |
| 3SV-6386 | Holding Fixture | 1 | |
| 3SV6386 | HOLDING FIXTURE | 1 | |
| 40081-T600 | HOLDING FIXTURE | 1 | |
| 4040893-001 | TOOL, ROTOR HOLDING | 1 | |
| 4041041-001 | FIXTURE, COMPRESSOR HOLDING | 1 | |
| 404225-1 | NLG HOLDING ROD | 1 | |
| 407-240-008-101 | HOLDING WRENCH | 1 | |
| 407-FWU-OH-22 | HOLDING TOOL | 1 | |
| 407-MAST-OH-01 | MAST HOLDING WRENCH | 1 | |
| 40743079ST | BODY HOLDING FIXTURE (BENCH MOUNTED) | 1 | |
| 41121T603 | HOLDING FIXTURE | 1 | |
| 412-240-002-101 | HOLDING TOOL INPUT QUILL (HP, EP) | 1 | |
| 412-240-008-101 | HOLDING FIXTURE | 1 | |
| 41446-T600 | HOLDING FIXTURE | 1 | |
| 41446-T602 | HOLDING FIXTURE | 1 | |
| 41565-T600 | HOLDING FIXTURE | 1 | |
| 41762T600 | HOLDING FIXTURE | 1 | |
| 41F9003-HF | HOLDING FIXTURE | 1 | |
| 420207 | HOLDING BLOCK | 2 | |
| 42249T600 | HOLDING FIXTURE | 1 | |
| 427-240-141-101 | HOLDING FIXTURE | 1 | |
| 429-244-002-101 | HOLDING PLATE SET | 1 | |
| 430-240-001-101 | MAST HOLDING TOOL 430-240-001-101 | 1 | |
| 43454-T-600 | HOLDING FIXTURE | 1 | |
| 438-0289-0-01 | HOLDING TOOL | 1 | |
| 45755 | HOLDING FIXTURE | 1 | |
| 460001775-1 | HOLDING BLOCKS | 1 | |
| 460001775-2 | HOLDING BLOCKS | 1 | |
| 460001775-3 | HOLDING BLOCKS | 1 | |
| 460001775-4 | HOLDING BLOCKS | 1 | |
| 460001775-5 | HOLDING BLOCK | 6 | |
| 460001775-5PM | HOLDING BLOCK | 1 | |
| 460001775-6 | HOLDING BLOCKS | 1 | |
| 460001775-7 | HOLDING BLOCKS | 1 | |
| 460001775-8 | HOLDING BLOCKS | 1 | |
| 460001775/5 | Holding Block | 6 | |
| 460002090-20 | HOLDING BLOCK | 4 | |
| 460002090-20PM | HOLDING BLOCK | 1 | |
| 460002090/20 | Holding Block | 4 | |
| 460004494-1 | HOLDING BLOCK | 1 | |
| 460005857-1 | HOLDING FIXTURE | 1 | |
| 460005857/1 | Holding Fixture | 1 | |
| 460005881PM | HOLDING BLOCKS | 1 | |
| 460005882PM | HOLDING BLOCKS | 1 | |
| 460006436FL | HOLDINGTOOL | 1 | |
| 489-49 | HOLDING WRENCH ADAPTOR (TOOL KIT) | 1 | |
| 4920-00-037-8100 | Holding Fixture, Inst | 1 | |
| 4920-00-272-5650 | GAP HOLDING FIXTURE | 1 | |
| 4920-00-904-4248 | Fixture, Holding | 1 | |
| 4D1691-12 | HOLDING FIXTURE DISASSEMBLY | 1 | |
| 4D1691-2 | HOLDING FIXTURE | 1 | |
| 4F60160 | HOLDING STAND | 1 | |
| 4F60160 | Holding Fixture, Fluid Flow Test Setup (2IT) | 1 | |
| 50000-T43 | HOLDING FIXTURE | 1 | |
| 5050D | HEATER AIRCRAFT (TRILECTRON INDUSTRIES, INC. (DIV. GSE HOLDINGS INC)) | 1 | |
| 508375-100 | SHAFT PRESS HOLDING | 1 | |
| 510-010 | PIPEFITTER'S CHAIN VISE, OR OTHER HOLDING STAND- TO HOLD RESERVOIR DURING DISSASSEMBLY/ASSEMBLY (AND SAFETY) | 1 | |
| 51131 | HOLDING FIXTURE | 1 | |
| 51154T1 | HOLDING FIXTURE (PARKER HANNIFIN CORPORATION) | 1 | |
| 51159 | DISK HOLDING TOOL | 1 | |
| 5171A0000-01 | HOLDING EQUIPMENT | 1 | |
| 51774-T2 | HOLDING FIXTURE | 1 | |
| 51774T2 | HOLDING FIXTURE (OUT) | 1 | |
| 51774T2PM | HOLDING FIXTURE (OUT) | 1 | |
| 52007S1000 | HOLDING FIXTURE | 1 | |
| 5221-13A | CYLINDER HOLDING FIXTURE ADAPTERS | 1 | |
| 5221-16A | CYLINDER HOLDING FIXTURE ADAPTER | 1 | |
| 5221B | CYLINDER HOLDING FIXTURE | 1 | |
| 53-2882 | Cylinder Base Nut Wrenches (Holding capacity: 9/16") (Add to cart: Add To Cart) (Holding capacity: 1/2") (Add to cart: Add To Cart) (Holding capacity: 5/8") (Add to cart: Add To Cart) (Holding capacity: 3/4") (Add to cart: Add To Cart) (Holding capacity: | 1 | |
| 53065-AF1 | HOLDING FIXTURE | 1 | |
| 53065-AT7 | HOLDING FIXTURE | 1 | |
| 53065AF1 | HOLDING FIXTURE | 1 | |
| 53065AT7 | HOLDING FIXTURE | 1 | |
| 5509 | HOLDING FIXTURE | 1 | |
| 55123S0100 | HOLDING DEVICE | 1 | |
| 55518S0000 | HOLDING FIXTURE | 1 | |
| 55569S0000 | HOLDING FIXTURE | 1 | |
| 55576S0000 | HOLDING FIXTURE | 1 | |
| 55578S0000 | HOLDING TOOL | 1 | |
| 55605S0000 | HOLDING FIXTURE | 1 | |
| 55606S0000 | HOLDING FIXTURE | 1 | |
| 55620S0000 | HOLDING FIXTURE | 1 | |
| 55642S0000 | HOLDING FIXTURE | 1 | |
| 55645S0000 | HOLDING FIXTURE | 1 | |
| 55658S0000 | HOLDING FIXTURE | 1 | |
| 55672S0000 | HOLDING FIXTURE | 1 | |
| 55794S0001 | HOLDING FIXTURE | 1 | |
| 558-1-05788 | IMPELLER HOLDING TOOL | 1 | |
| 558-1-13561 | Adjustable holding fixture | 1 | |
| 55871S0000 | HOLDING FIXTURE | 1 | |
| 56402T3 | HOLDING FIXTURE | 1 | |
| 56403T1 | HOLDING FIXTURE | 1 | |
| 56472S0000 | TORQUE CHECKING/HOLDING FIXTURE | 2 | |
| 56507S0003 | HOLDING BLOCK | 1 | |
| 56511S0002 | HOLDING PLATE | 1 | |
| 56512- T3 | HOLDING FIXTURE | 1 | |
| 56512-T2 | HOLDING FIXTURE | 1 | |
| 56512T2 | HOLDING FIXTURE | 1 | |
| 56512T2PM | HOLDING FIXTURE | 1 | |
| 56561S0001 | HOLDING FIXTURE | 1 | |
| 56572T1 | HOLDING FIXTURE | 1 | |
| 56578S0001 | HOLDING FIXTURE | 2 | |
| 56580S0000 | HOLDING FIXTURE | 1 | |
| 56595S0003 | Holding Plug | 1 | |
| 56599S0000 | HOLDING FIXTURE | 1 | |
| 56600S0000 | HOLDING FIXTURE | 1 | |
| 56627T1 | HOLDING FIXTURE | 1 | |
| 56628T1 | HOLDING FIXTURE | 1 | |
| 56632- T2 | HOLDING TOOL | 1 | |
| 56632-T2 | HOLDING FIXTURE | 1 | |
| 56632T2 | HOLDING FIXTURE | 1 | |
| 56632T2PM | HOLDING FIXTURE | 1 | |
| 56649S0000 | HOLDING FIXTURE | 1 | |
| 56649S0000 | HOLDING FIXTURE (9IT) | 1 | |
| 56650S0000 | HOLDING FIXTURE | 1 | |
| 56652S0000 | HOLDING FIXTURE | 1 | |
| 56674S0001 | HOLDING DEVICE | 1 | |
| 56699T4 | HOLDING FIXTURE | 1 | |
| 56724S0000 | HOLDING FIXTURE | 11 | |
| 56739S0000 | HOLDING FIXTURE | 1 | |
| 56740S0000 | HOLDING FIXTURE | 1 | |
| 56741S0000 | HOLDING FIXTURE | 1 | |
| 56837A0000-01 | HOLDING FIXTURE | 1 | |
| 56838-0100 | HOLDING DEVICE | 1 | |
| 56838A0000-01 | HOLDING FIXTURE | 1 | |
| 56932-T2 | Holding Fixture | 1 | |
| 56932T2 | HOLDING FIXTURE | 1 | |
| 56961A0000-01 | HOLDING FIXTURE | 1 | |
| 56963A0000-01 | HOLDING FIXTURE | 1 | |
| 56964A0000-01 | HOLDING FIXTURE | 1 | |
| 56980A0000-01 | HOLDING FIXTURE | 1 | |
| 56994A0000-01 | HOLDING FIXTURE | 1 | |
| 57018A0000-01 | HOLDING FIXTURE | 1 | |
| 57112A0000-01 | HOLDING FIXTURE | 1 | |
| 57481T4 | HOLDING FIXTURE | 1 | |
| 57565-0007 | HOLDING DEVICE / LOCATION BOLTS | 1 | |
| 57593A0000-01 | HOLDING FIXTURE | 2 | |
| 57629-0001 | Holding Device/Location Bolts | 1 | |
| 57737-0003 | Holding Device | 1 | |
| 57925-T1 | HOLDING FIXTURE | 1 | |
| 57925T1 | HOLDING FIXTURE | 1 | |
| 57925T601 | HOLDING FIXTURE | 1 | |
| 57949A0000-01 | HOLDING FIXTURE | 2 | |
| 57949A0000‐01 | FIXTURE,HOLDING,NOSE LANDING GEAR | 2 | |
| 57949A0200-01 | Holding Block | 1 | |
| 57952-T1 | HOLDING FIXTURE | 1 | |
| 57952T1 | HOLDING FIXTURE | 1 | |
| 57975A0000-01 | HOLDING FIXTURE | 1 | |
| 57996T1 | HOLDING FIXTURE | 1 | |
| 57996T3 | HOLDING FIXTURE | 1 | |
| 58098A0000-01 | Holding Fixture | 1 | |
| 58115A0000-01 | HOLDING FIXTURE | 1 | |
| 58222A0000-01 | HOLDING FIXTURE | 1 | |
| 58463A0000-01 | HOLDING FIXTURE | 1 | |
| 58517A0000-01 | HOLDING FIXTURE | 1 | |
| 58613-T1 | Holding Fixture | 1 | |
| 58613T1 | HOLDING FIXTURE | 1 | |
| 58692T1 | HOLDING FIXTURE | 1 | |
| 58812A0000-01 | MLG HOLDING FIXTURE TOOL | 1 | |
| 59012A0000-01 | MLG HOLDING FIXTURE TOOL | 1 | |
| 59115A0000-01 | HOLDING FIXTURE | 1 | |
| 59137A0000-01 | HOLDING FIXTURE | 1 | |
| 59194A0000-01 | HOLDING FIXTURE | 1 | |
| 59199A0000-01 | HOLDING FIXTURE | 1 | |
| 59213-0001 | HOLDING PLATE | 1 | |
| 59218A0000-01 | HOLDING FIXTURE | 1 | |
| 5936856-501 | NLG Drag Link Bolt Holding Tool | 2 | |
| 59493A0000-01 | Holding Fixture | 1 | |
| 59512A0000-01 | FIXTURE-HOLDING | 1 | |
| 59549A0000-01 | FIXTURE-HOLDING | 1 | |
| 59613A0000-01 | HOLDING FIXTURE | 1 | |
| 59614A0000-01 | HOLDING FIXTURE | 1 | |
| 59654-T200 | HOLDING FIXTURE | 1 | |
| 59654-T200PM | HOLDING FIXTURE | 1 | |
| 59654T200 | HOLDING FIXTURE | 1 | |
| 59654T200 | Holding Fixture base | 1 | |
| 59654T200PM | HOLDINGFIXTUREBASE | 1 | |
| 59656-T2 | HOLDING FIXTURE | 2 | |
| 59656T002 | HOLDING FIXTURE | 1 | |
| 59656T2 | HOLDING FIXTURE | 2 | |
| 59662A0000-01 | HOLDING FIXTURE | 1 | |
| 600-091-24 | HOLDING TOOL - NUT, HEX COUPLING | 1 | |
| 600-091-24,600-157-24 | HOLDING TOOL - NUT, HEX COUPLING | 1 | |
| 600-155-8P | HOLDING TOOL | 1 | |
| 600-155-8R | HOLDING TOOL | 1 | |
| 600-157-24 | HOLDING TOOL - NUT, HEX COUPLING | 1 | |
| 600-185-8PA | HOLDING TOOL | 1 | |
| 600-185-8R | HOLDING TOOL | 1 | |
| 600290T (3 ITEMS) | RESTRAINER AND HOLDING FIXTURE | 1 | |
| 61386-T200 | HOLDING FIXTURE | 1 | |
| 620-880-512-0 | HOLDING TOOL | 1 | |
| 6202FE104 | HOLDING TOOL FOR FE104 | 1 | |
| 62201-T200 | HOLDING FIXTURE | 2 | |
| 62201T200 | HOLDING PRESSING | 2 | |
| 62599-T200 | HOLDING FIXTURE | 1 | |
| 62696-T200 | HOLDING FIXTURE | 1 | |
| 63036T201 | HOLDING FIXTURE | 1 | |
| 63041017-1 | SHOCK STRUT HOLDING FIXTURE | 1 | |
| 634-2835-001 | CAPSTAN HOLDING FIXTURE | 1 | |
| 6429935-1 | HOLDING STAND | 1 | |
| 6429935-1 | Holding Stand | 1 | |
| 6429936-1 | Holding Cradle | 1 | |
| 64526-1 | CYLINDER HOLDING BLOCK | 1 | |
| 64526-2 | BLOCK, CYLINDER HOLDING | 1 | |
| 65012T1 | HOLDING FIXTURE | 1 | |
| 6549970-25 | HOLDING FIXTURE (7 IT) | 1 | |
| 65572-T2 | HOLDING FIXTURE | 2 | |
| 65572T2 | HOLDING FIXTURE | 2 | |
| 65572T2A | Holding Fixture | 1 | |
| 65596T200 | Holding Fixture and Cold forming Tools | 1 | |
| 65599T1 | HOLDING FIXTURE | 1 | |
| 65662T200 | HOLDING FIXTURE | 1 | |
| 657D | MAGNETIC BASE HOLDING ROD | 2 | |
| 65885T2 | HOLDING FIXTURE | 1 | |
| 65885T3 | HOLDING FIXTURE | 1 | |
| 65B8562-HF | HOLDING FIXTURE (5 IT) | 1 | |
| 6610-20560-01-TA | HOLDING PLATE | 1 | |
| 66463T1 | HOLDING FIXTURE | 1 | |
| 67587T4 | HOLDING FIXTURE | 1 | |
| 7821 | TOOL-HOLDING VALVE DURING ASSEMBLY | 2 | |
| 67432 | ALMEN HOLDING BLOCK | 1 | |
| 71776 | COMPRESSOR ROTOR HOLDING FIXTURE | 1 | |
| 74601 | HOLDING WRENCH | 1 | |
| 74609 | HOLDING FRAME | 1 | |
| 74924 | HOLDING WRENCH | 1 | |
| 77361 | HOLDING FIXTURE | 1 | |
| 687005 | HOLDING FIXTURE, VALVE END | 1 | |
| 709082 | HOLDING PLATE FOR VICE | 1 | |
| 728285 | TEST HOLDING FIXTURE | 1 | |
| 739171 | HOLDING FIXTURE | 2 | |
| 6723085 | HOLDING FIXTURE | 1 | |
| 6795588 | WRENCH HOLDING 32/64 PITCH, 24 TOOTH SPLINE | 2 | |
| 6795922 | Fixture - Holding | 1 | |
| 6795924 | Fixture - Holding | 1 | |
| 6795925 | Fixture - Holding | 1 | |
| 6795926 | Fixture Holding | 1 | |
| 6795927 | Fixture - Holding | 1 | |
| 6795966-100 | FIXTURE, HOLDING, COM | 1 | |
| 6796135 | Holding Fixture | 1 | |
| 6796263 | Holding Fixture | 1 | |
| 6796338 | HOLDING FIXTURE - PROP SHAFT | 1 | |
| 6796359 | HOLDING ADAPTER | 4 | |
| 6796395 | HOLDING ADAPTER THRUST NUT | 1 | |
| 6796439 | PROP BRAKE FACING GROOVING HOLDING FIXTURE | 1 | |
| 6796545 | Fixture Holding | 1 | |
| 6796598 | FIXTURE - HOLDING | 1 | |
| 6796610 | Combustion Liner Holding Fixture | 2 | |
| 6796621 | FIXTURE - HOLDING, TURBINE COUPLING SHAFT | 2 | |
| 6796667 | Holding Fixture Compressor Housing Assy Grit Blast | 2 | |
| 6796698 | FIXTURE -HOLDING, FUEL CONTROL | 2 | |
| 6796795 | FIXTURE, HOLDING, COMBUSTION LINER ASSEMBLY | 1 | |
| 6796977 | FIXTURE - HOLDING | 1 | |
| 6797099 | Holding Fixture | 1 | |
| 6797173 | HOLDING FIXTURE - TURB COUPLING SHAFT | 1 | |
| 6797236 | ADAPTER, HOLDING, #60 PROPELLER SHAFT | 1 | |
| 6797670 | FIXTURE,HOLDING,COMPRESSOR ROTOR HOUSING | 1 | |
| 6798045 | HOLDING GAS PRODUCER TURBINE WRENCH | 2 | |
| 6798239 | Fixture â Holding, Tach Drive Idler Gear | 2 | |
| 6798783 | FIXTURE-HOLDING, INNER & INTERM. MEMBER | 1 | |
| 6798865 | ADAPTER, HOLDING, COMBUSTION LINER ASSEMBLY | 1 | |
| 6799698 | FIXTURE, HOLDING, TURBINE ROTOR | 1 | |
| 68421T1 | HOLDING FIXTURE | 1 | |
| 68506-050-1 | HOLDING FIXTURE - THOMSON-CSF | 1 | |
| 68506-078-1 | HOLDING FIXTURE | 1 | |
| 68506-109-1 | HOLDING FIXTURE | 1 | |
| 68506-110-1 | HOLDING FIXTURE | 1 | |
| 68507-639-1 | HOLDING CLIP | 1 | |
| 68600-253-1 | HOLDING FIXTURE | 1 | |
| 68614T1 | HOLDING FIXTURE (PARKER HANNIFIN CORPORATION) | 1 | |
| 6872416 | FIXTURE - HOLDING | 1 | |
| 6872499 | FIXTURE - HOLDING | 1 | |
| 6872596 | FIXTURE - HOLDING, TURB AND EXHAUST COLL SUP ASSY | 1 | |
| 6872937 | FIXTURE - HOLDING | 1 | |
| 6872938 | FIXTURE - HOLDING 2ND STAGE | 1 | |
| 6872939 | FITURE - HOLDING 3RD STAGE | 1 | |
| 6872940 | FIXTURE - HOLDING 4TH STAGE | 1 | |
| 6872941 | FIXTURE - HOLDING SERIES 2 4TH STAGE | 1 | |
| 6872943 | FIXTURE - HOLDING, SERIES 2 3RD STAGE | 1 | |
| 6872946 | FIXTURE - HOLDING | 1 | |
| 6872947 | FIXTURE - HOLDING 1ST STAGE | 1 | |
| 6872948 | FIXTURE----HOLDING, SERIES II 3RD STAGE NOZZLE SHOT PEENING | 1 | |
| 6872984 | FIXTURE - HOLDING, COMPRESSOR REAR | 1 | |
| 6874005 | HOLDING FIXTURE, CHECK VALVE PLUG | 1 | |
| 6877005 | HOLDING FIXTURE VALVE END | 1 | |
| 6877006 | HOLDING FIXTURE CHECK VALVE PLUG | 1 | |
| 6877010 | HOLDING FIXTURE TIP END | 1 | |
| 6877011 | HOLDING FIXTURE FINAL TEST | 1 | |
| 6877012 | HOLDING FIXTURE PRESSURE TEST | 1 | |
| 6877028 | STEM HOLDING FIXTURE | 1 | |
| 6877114 | Fixture – Holding Fuel Nozzle | 1 | |
| 6889891 | IMPELLER HOLDING FIXTURE | 3 | |
| 6891351 | WRENCH - HOLDING, GAS PROD TURBINE | 2 | |
| 6893357 | WRENCH - HOLDING, 32/64 PITCH | 2 | |
| 6893360 | COMPRESSOR HOLDING FIXTURE | 2 | |
| 6897103 | HOLDING FIXTURE TIP SEAL | 1 | |
| 6897875 | FUEL NOZZLE HOLDING FIXTURE | 2 | |
| 7630951 | ELEVATOR HOLDING FIXTURE | 1 | |
| 80410235 | 8041-HOLDING DEVICE FOR SPANNERS FO | 1 | |
| 460001775 | HOLDING BLOCKS | 1 | |
| 460002002 | HOLDING FIXTURE | 1 | |
| 460002090 | HOLDING BLOCKS | 1 | |
| 460002878 | HOLDING FIXTURE | 1 | |
| 460004492 | HOLDING BLOCK | 1 | |
| 460004494 | HOLDING BLOCK | 1 | |
| 460005102 | HOLDING TOOL | 1 | |
| 460005103 | HOLDING TOOL | 1 | |
| 460005845 | SETTING AND HOLDING FIXTURE | 1 | |
| 460005857 | HOLDING FIXTURE | 1 | |
| 460005881 | Holding Blocks | 1 | |
| 460005882 | Holding Blocks | 1 | |
| 460005985 | HOLDING FIXTURE | 1 | |
| 460006122 | HOLDING FIXTURE | 1 | |
| 460006126 | HOLDING PLATE | 1 | |
| 460006132 | HOLDING PLATE | 1 | |
| 460006231 | HOLDING FIXTURE | 7 | |
| 460006403 | HOLDING FIXTURE | 2 | |
| 460006406 | HOLDING BLOCKS | 7 | |
| 460006435 | HOLDING TOOL | 4 | |
| 460006436 | HOLDING TOOL | 4 | |
| 460006437 | TOOL-HOLDING | 15 | |
| 460006438 | HOLDING TOOL | 5 | |
| 460006442 | SPANNER - HOLDING | 11 | |
| 460006464 | HOLDING BLOCK | 1 | |
| 460006469 | HOLDING FIXTURE | 1 | |
| 460006475 | HOLDING PLATE | 4 | |
| 460006476 | HOLDING PLATE | 2 | |
| 460006511 | HOLDING PLATE (3IT) | 1 | |
| 460006525 | HOLDING PLATE | 1 | |
| 460006570 | HOLDING BLOCKS | 1 | |
| 460006572 | HOLDING BLOCKS | 1 | |
| 460006579 | HOLDING BLOCKS | 1 | |
| 460006584 | HOLDING POT | 1 | |
| 460006628 | HOLDING SPANNER | 1 | |
| 460006648 | HOLDING POT | 1 | |
| 460006953 | HOLDING BRACKET | 1 | |
| 460006964 | HOLDING POT | 1 | |
| 460007000 | MLG HOLDING GAG TOOL | 6 | |
| 460007103 | HOLDING FIXTURE | 9 | |
| 460007111 | DRIFT HOLDING | 8 | |
| 460007122 | HOLDING TOOL | 2 | |
| 460007128 | HOLDING BLOCKS | 1 | |
| 460007131 | Holding Fuxture | 1 | |
| 460007150 | HOLDING BLOCK | 1 | |
| 460007151 | HOLDING FIXTURE | 1 | |
| 460007200 | HOLDING POT | 1 | |
| 460007244 | HOLDING BRACKET | 4 | |
| 460007338 | HOLDING FIXTURE | 1 | |
| 4600067103 | HOLDING FIXTURE | 1 | |
| 4600067122 | HOLDING TOOL | 1 | |
| 4600067200 | HOLDING POT | 1 | |
| 4600067338 | HOLDING FIXTURE | 1 | |
| 4600067356 | HOLDING SPANNER | 1 | |
| 4611416501 | UPHOLDING TOOL | 1 | |
| 6SV-41427 | Holding Fixture | 1 | |
| 6SV-90846 | HOLDING STAND | 2 | |
| 6SV-91966 | Holding Tool | 1 | |
| 6SV-92071 | Holding Fixture | 1 | |
| 6SV41427 | HOLDING FIXTURE | 1 | |
| 6SV90846 | HOLDING FIXTURE | 2 | |
| 6V41427 | HOLDING FIXTURE | 1 | |
| 7-562100046-601 | HOLDING PLATE | 1 | |
| 70001T184 | HOLDING FIXTURE | 1 | |
| 70642593-1 | TK FLANGE HOLDING TOOL (2PC) "A/B" | 1 | |
| 70700-77316-041 | TAIL ROTOR SPRING CAPSULE HOLDING CLAMP | 1 | |
| 711480-HF | HOLDING FIXTURE | 1 | |
| 734-93367 | Holding Adapter | 1 | |
| 74194AF1 | RECEIVER ALIGNMENT AND HOLDING FIXTURE | 1 | |
| 74194AT1 | PISTON HOLDING WRENCH | 1 | |
| 74194AT4 | HOLDING FIXTURE | 1 | |
| 750687-6 | TORSION LINK HOLDING TOOL | 1 | |
| 750687PK | HOLDING TOOL | 3 | |
| 7637987-17 | A53-142 Douglas DC-9 Probe Holding Fixture and alignment 2024-T3 Clad Aluminum. Figure 1, Sheet 4 | 1 | |
| 77144-T12 | Holding Tool | 1 | |
| 77144-T5 | Holding Fixture | 1 | |
| 777-162 | HOLDING TOOL | 1 | |
| 79001899-1 | HOLDING AND COUNTER TOOL | 1 | |
| 79001899-1 PM | HOLDING AND COUNTER TOOL | 1 | |
| 79001899-1 PM | HOLDING AND COUNTER TOOL | 1 | |
| 7MIT5-88439 | GEAR HOLDING WRENCH | 6 | |
| 801308-S58-2 | VALVE HOLDING FIXTURE | 1 | |
| 803213-S58-2 | HOLDING FIXTURE | 1 | |
| 811-00461 | HOLDING FIXTURE, MODEL 2400 | 1 | |
| 81996-13083230 | HOLDING FIXTURE ASSEMBLY (PNVS) | 1 | |
| 833093-1 | TURBINE AND COMPRESSOR HOLDING FIXTURE | 1 | |
| 833128-1 | HOLDING FIXTURE | 1 | |
| 833467-1 | FIXTURE TEST MOTOR HOLDING | 1 | |
| 833474-1 | FIXTURE HOLDING TURBINE | 1 | |
| 833539-1 | TURBINE HOLDING FIXTURE | 1 | |
| 833855-1 | Torque and Holding Fixture | 1 | |
| 833858-1 | Holding Press Fixture | 1 | |
| 834268-1 | Holding Fixture | 1 | |
| 834384-1 | VALVE ASSEMBLY HOLDING FIXTURE (HOLDING TOOL) | 1 | |
| 834417-1 | Holding Fixture | 1 | |
| 834417-1PM | HOLDING FIXTURE | 1 | |
| 834448-1 | STOP HOLDING FIXTURE | 1 | |
| 834506-1 | DIAPHRAGM HOLDING FIXTURE (4 IT) | 1 | |
| 834709-1 | FIXTURE, HOLDING, TI | 1 | |
| 834709-2 | HOLDING FIXTURE | 1 | |
| 834709-3 | FIXTURE, HOLDING, TI | 1 | |
| 834709-4 | FIXTURE HOLDING | 1 | |
| 834716 | Holding Clamp | 1 | |
| 834864-1 | DRIVEN COMPRESSOR COUPLING SHAFT HOLDING FIXTURE | 1 | |
| 835360-1 | Holding Fixture | 1 | |
| 835854-1 | Holding Fixture | 1 | |
| 835873-1 | Holding Fixture | 1 | |
| 83720089 | HOLDING BLOCK | 1 | |
| 83720108 | HOLDING BLOCK | 1 | |
| 83720119 | Holding Block | 1 | |
| 83820099 | BALLNUT HOLDING NUT | 1 | |
| 83820100 | SCREWSHAFT HOLDING ADAPTOR | 1 | |
| 83820101 | BALLNUT HOLDING NUT | 1 | |
| 83820102 | SCREWSHAFT HOLDING ADAPTOR | 1 | |
| 852D102/05 | HOLDING FIXTURE BACKLASH | 1 | |
| 8563488G01 | FIXT., HOLDING SECTOR SUPPORT | 1 | |
| 856A 2421G02 | RING HOLDING STAGE 1 OUTER STATIONARY AIR SEAL | 4 | |
| 856A 2826G03 | FIXTURE HOLDING NO.4 BEARING | 2 | |
| 856A 3358G03 | FIXTURE HOLDING NO.4BEARINGINNER RACE BOLT | 2 | |
| 856A1035 | FIXTURE, HOLDING - NO. 3 BEARING IGB RETAINER NUT | 1 | |
| 856A1035 G01 | Fixture Holding ‐ No. 3 Brg IGB Retainer Nut | 9 | |
| 856A1035G01 | Holding Fixture | 9 | |
| 856A1047G02 | Holding Fixture | 1 | |
| 856A1047G03 | FIXTURE HOLDING | 3 | |
| 856A1092 | HOLDING FIXTURE | 1 | |
| 856A1092P01 | Holding Fixture | 1 | |
| 856A1094G01 | ADAPTER, HOLDING - POWER ARM HPT NOZZLE ASSEMBLY (HOLDING ADAPTER) | 1 | |
| 856A1097G01 | SCREW SET, HOLDING - NUT SHIELD COMB CASE (SCREW SET) | 8 | |
| 856A1097G02 | SCREW SET, HOLDING - NUT SHIELD COMBUSTION CASE | 1 | |
| 856A109G01 | SCREW SET, HOLDING - NUT SHIELD COMBUSTION CASE | 1 | |
| 856A1199 | HOLDING FIXTURE - HPCR/HPTR BOLTS | 1 | |
| 856A1199P01 | HOLDING FIXTURE - HPCR/HPTR BOLTS | 11 | |
| 856A1430 | FIXTURE, HOLDING - IGB MODULE (HOLDING FIXTURE) | 1 | |
| 856A1430G02 | Fixture, Holding - IGB Module (holding fixture) | 7 | |
| 856A1451P01 | FIXTURE HOLDING SEAL | 1 | |
| 856A1845G02 | FIXTURE, HOLDING - VANE SECTOR | 3 | |
| 856A1845G03 | FIXTURE, HOLDING - VANE SECTOR | 5 | |
| 856A2377 | HOLDING SCREW | 1 | |
| 856A2377G01 | FIXTURE, CENTERING AND HOLDING - ROTATING SEALS(CENTERING AND HOLDING FIXTURE) | 1 | |
| 856A2412 | RING, HOLDING - STG 1 OUTER STATIONARY AIR SEAL AND TURBINE | 1 | |
| 856A2412G01 | Ring, Holding - Stg 1 Outer Stationary Air Seal and Turbine Shroud Support (holding ring) | 6 | |
| 856A2412G02 | RING, HOLDING - STG 1 OUTER STATIONARY AIR SEAL AND TURBINE | 1 | |
| 856A2421G02 | HOLDING RING - OUTER STATIONNARY | 4 | |
| 856A2422G01 | HOLDING SET - EXHAUST NOZZLE | 1 | |
| 856A2543G02 | LPT SHAFT HOLDING FIXTURE | 7 | |
| 856A2607G01 | HOLDING FIXTURE | 4 | |
| 856A2618 | FIXTURE- HOLDING/ROTOR/STATOR | 1 | |
| 856A2618 REV C | FIXTURE- HOLDING/ROTOR/STATOR | 1 | |
| 856A2618G01 | FIXTURE HOLDING-ROTOR | 5 | |
| 856A2618G02 | Holding Fixture | 2 | |
| 856A2618G03 | FIXTURE, HOLDING | 3 | |
| 856A2618G04 | FIXTURE, HOLDING ROTOR/STATOR | 11 | |
| 856A2644 | TOOL, HOLDING - FAN DISK (HOLDING TOOL) | 1 | |
| 856A2644 G02 | TOOL, HOLDING - FAN DISK | 3 | |
| 856A2644G01 | FAN DISK HOLDING TOOL | 1 | |
| 856A2644G02 | FAN DISK HOLDING TOOL | 3 | |
| 856A2644G03 | HOLDING TOOL | 11 | |
| 856A2660G11 | HOLDING FIXTURE - ROTOR/STATOR, LPT | 5 | |
| 856A2693G03 | HOLDING FIXTURE - N°4 BEARING INNER | 1 | |
| 856A2747G01 | RING HOLDING STAGE 1 OUTER STA AIR | 2 | |
| 856A2826 | HOLDING FIXTURE NO.4 BEARING | 1 | |
| 856A2826G01 | FIXTURE, HOLDING - NO. 4 BEARING INNER RACE BOLTS (HOLDING FIXTURE) | 1 | |
| 856A2826G02 | HOLDING FIXTURE - N°4 BEARING INNER | 1 | |
| 856A2826G03 | HOLDING FIXTURE - N4 BEARING INNER | 2 | |
| 856A2920G02 | TOOL SET, HOLDING - AIR/OIL SEPARATOR TORLON DUCTS | 3 | |
| 856A2956G01 | HOLDING RING - FAN RETAINING RING | 16 | |
| 856A3287G01 | Holding Fixture | 1 | |
| 856A3287G02 | Fixture Holding | 3 | |
| 856A3358 | Fixture Holding Bolts No4 BRG Inner Race | 1 | |
| 856A3358G02 | Holding Fixture | 1 | |
| 856A3358G03 | Holding Fixture | 2 | |
| 856A3358G04 | FIXTURE HOLDING NO 4 BRG INNER RACE BOLTS | 2 | |
| 856A3358G05 | HOLDING FIXTURE – N°4 BRG INNER RACE BOLTS | 4 | |
| 856A3413G01 | HOLDING RING -NO.4 BEARING ROLLERS | 1 | |
| 856A3413P02 | HOLDING RING | 1 | |
| 856A3488 | HOLDING SECTORS SET - LPT SHAFT | 1 | |
| 856A3488G01 | HOLDING SECTORS SET - LPT SHAFT | 4 | |
| 856A3751 | RING HOLDING STG 1 OUTER STA AIR SEAL & TURBINE SHROUD SUPPORT | 1 | |
| 856A3751 G02 | Holding Ring - Stage 1 Outer Sta Air Seal And Turb | 1 | |
| 856A3751G01 | RING HOLDING STG 1 OUTER STA AIR SEAL & TURBINE SHROUD SUPPORT | 1 | |
| 856A3751G02 | RING HOLDING STG 1 OUTER STA AIR SEAL & TURBINE SHROUD SUPPORT | 1 | |
| 856A3751G03 | RING HOLDING STAGE 1 OUTER STA AIR SEAL AND TURBINE SHROUD sUPPORT | 7 | |
| 856A3751G04 | RING, HOLDING - STG 1 OUTER STATIONARY AIR SEAL | 2 | |
| 856A3761G01 | HOLDING RING - LPT OUTER STATIONARY AIR SEAL STG2 | 6 | |
| 856A3764G01 | HOLDING RING - LPT OUTER STATIONARY AIR SEAL STG3 | 8 | |
| 856A3794 | RING, HOLDING STG 1 OUTER | 1 | |
| 856A3794G01 | RING, HOLDING STG. 1 | 9 | |
| 856A4026 | FIXTURE, HOLDING NO.3 BRG FWD STATIONA | 1 | |
| 856A4026G02 | FIXTURE HOLDING NO 3 | 1 | |
| 856A4027 | FIXT HOLDING BRG AFT OILSEAL | 1 | |
| 856A4027G01 | Holding Fixture | 1 | |
| 856A4028G01 | Holding Fixture | 1 | |
| 856A4706G01 | FIXTURE, HOLDING -FAN BLADE | 1 | |
| 856A4706G02 | FIXTURE, HOLDING -FAN BLADE | 1 | |
| 856A5556G01 | STAGE 1-4 LPT BLADE TWIST ANGLE CHECK (CONF.2 AND 3) (HOLDING FIXTURE) | 1 | |
| 856A5556G02 | FIXTURE HOLDING TWIST ANGLE CHECK LPT BLADES STAGE 1-4 | 3 | |
| 856A5657G01 | HOLDING FIXTURE - LPT NOZZLE STG 2 | 1 | |
| 856A5658G01 | HOLDING FIXTURE - LPT NOZZLE STG 3 | 1 | |
| 856A5659G01 | HOLDING FIXTURE - LPT NOZZLE STG 4 | 1 | |
| 856A5671G01 | HOLDING & GRINDING MATING FACE | 1 | |
| 856A5672G01 | FIXTURE, HOLDING EDM MACHINING SLOT NOZZLE | 1 | |
| 856A5678 G01 | Holding Fixture Stg 2 Outer | 1 | |
| 856A5678G01 | Tool Set holding Fixture | 1 | |
| 856A5679 G01 | Holding Fixture Stg 3 Outer | 1 | |
| 856A5679G01 | Tool Set holding Fixture | 1 | |
| 856A5917G01 | FIXT, HOLDING AIR COOLING | 1 | |
| 856A5947G01 | FIXTURE, HOLDING –FAN BLADE | 1 | |
| 856A5947G02 | FIXTURE, HOLDING -FAN BLADE | 1 | |
| 856A6753G01 | FIXTURE HOLDING A/C | 1 | |
| 856A6790G01 | FIXTURE HOLDING GRIND | 1 | |
| 856A6794G01 | HOLDING FIXTURE | 1 | |
| 856AI035 | FIXT HOLDING NO3 BRG IGB NUT | 1 | |
| 856А2618 | FIXTURE, HOLDING - ROTOR/STATOR, LPT | 1 | |
| 856А2618G04 | FIXTURE, HOLDING - ROTOR/STATOR, LPT | 1 | |
| 861CAB-0001A-HF | HOLDING FIXTURE | 1 | |
| 881 8 828 000 | HOLDING TOOL | 1 | |
| 881 8 841 000 | HOLDING TOOL | 2 | |
| 900209 | Mitutoyo 900209 Holding Bar for Test Indicator (Length 100mm) | 1 | |
| 900581 | Mitutoyo 900581 Centre Probe (with Inch Type Holding Bar) | 1 | |
| 900764 | Mitutoyo 900764 Depth Gauge Attachment with Metric Type Holding Bar | 1 | |
| 900878 | Mitutoyo 900878 Depth Gauge Attachment with Inch Type Holding Bar | 1 | |
| 902053 | Mitutoyo 902053 Swivel Clamp used with Holding Bar | 1 | |
| 906078 | STAMP WITH HOLDING FIXTURE | 1 | |
| 906079 | STAMP WITH HOLDING FIXTURE | 1 | |
| 906080 | MEASURING DEVICE WITH HOLDING FIXTURE | 1 | |
| 8814731000 | HOLDING FIXTURE | 1 | |
| 8817431000 | HOLDING FIXTURE | 1 | |
| 8818828000 | HOLDING TOOL | 1 | |
| 8818841000 | HOLDING TOOL | 2 | |
| 8819-958-000 | SEGMENT HOLDING TOOL | 1 | |
| 8819105000 | HOLDING FIXTURE | 1 | |
| 8819774000 | SEGMENT HOLDING TOOL | 1 | |
| 8819958000 | RING HOLDING TOOL | 1 | |
| 882700AF2 | HOLDING FIXTURE | 1 | |
| 89-117-2 | TRANSMITTER HOLDING FIXTURE | 1 | |
| 8C2175 | FIXTURE, HOLDING - STG 7 HPCS BOLT | 1 | |
| 8C2185 | FIXTURE, HOLDING – STG 1 VSV RING | 1 | |
| 8C3300 | FIXTURE, HOLDING - VBV DOOR | 1 | |
| 8ME65B01202-1 | TORSION LINK HOLDING TOOL | 1 | |
| 9001899-1 | PM HOLDING AND COUNTER TOOL | 1 | |
| 902F027-1 | ROTOR HOLDING FIXTURE | 1 | |
| 90C400SLN | POWER UNIT ELECTRICAL (TRILECTRON INDUSTRIES, INC. (DIV. GSE HOLDINGS INC)) | 1 | |
| 918216-1-1 | Shaft Holding Tool | 1 | |
| 92700-10316-041 | SPRING CAPSULE HOLDING CLAMP | 1 | |
| 92700-10339-041 | HOLDING FIXTURE, SWASHPLATE TRUNNION | 1 | |
| 933A751-1 | HOLDING FIXTURE | 1 | |
| 9446M76G01 | Pan, Holding (holding pan) | 2 | |
| 9480M17G02 | HOLDING TOOL | 1 | |
| 9480M17G03 | HOLDING TOOL | 1 | |
| 9480M17G04 | HOLDING TOOL | 1 | |
| 95-92123-0001 | HOLDING DEVICE | 1 | |
| 95-93060-0001 | Holding Tool | 1 | |
| 951144 | Mitutoyo 951144 Centre Probe (with Metric Holding Bar) | 1 | |
| 953638 | Mitutoyo 953638 Holding Bar for Swivel Clamp (Metric) | 1 | |
| 953639 | Mitutoyo 953639 Holding Bar for Swivel Clamp (Inch) | 1 | |
| 956A6436 | FIXTURE - HOLDING - LPT NOZZLE | 1 | |
| 956A6465 | FIXTURE - HOLDING - LPT CASE MISE AU ROND | 1 | |
| 956A8404 | FIXTURE - HOLDING RING - LPT CASE | 1 | |
| 956A8547 | FIXTURE - HOLDING - BRACKETS - OIL DRAIN | 1 | |
| 95CD0004 | ENGINE HOLDING FIXTURES | 1 | |
| 965042 | TOOL - HOLDING, ELEVATOR CONTROL CABLE TENSION REGULATOR | 1 | |
| 96SPL-12757-D-0054 | UPPER AND LOWER PISTON HOLDING FIXTURE | 1 | |
| 974B0000-01-TA | TEST HOLDING FIXTURE (6 IT) | 1 | |
| 98A08001005000 | HOLDING SET - MEASURING CORD | 5 | |
| 98A08001005001 | Set-holding measuring cord dispositif p0Ur | 2 | |
| 98A08001005002 | Set-holding measuring cord dispositif p0Ur | 1 | |
| 98A24403000 | CABLE HOLDING STRAP | 1 | |
| 98A2440300000 | CABLE HOLDING STRAP | 3 | |
| 98A24403000000 | CABLE HOLDING STRAP | 30 | |
| 98A24403000000-REVE | CABLE HOLDING STRAP | 1 | |
| 98A27108015800 | TOOL - HOLDING, ALL SPEED AILERON ACTUATOR BOLTS | 1 | |
| 98A27508041000 | HOLDING TOOL - DISTANCE BUSHES | 2 | |
| 98A32203004000 | HOLDING FIXTURE | 2 | |
| 98A53103000000 | HOLDING-PANEL TOOL | 1 | |
| 98A57104004202 | SPANNER HOLDING | 1 | |
| 98A76103500000 | RINGS AND COMPRESSED SPRINGS HOLDING TOOL | 1 | |
| 98D27403000000 | HOLDING TOOL-TRIM CTL LOWER SHAFT | 10 | |
| 98D27507541011 | WRENCH-HOLDING | 1 | |
| 98D47103500000 | HOLDING FIXTURE | 9 | |
| 98D52003006000 | HOLDING HOLDIND-REPLACE FITTING HINGE | 1 | |
| 98D52103002000 | HOLDING-RODS DOOR N1 | 1 | |
| 98D532203504 | NOSE LDG HOLDING TROLLEY | 1 | |
| 98F32301015000 | HOLDING TOOL-CLG DOOR | 3 | |
| 98F32301021000 | HOLDING TOOL CLG DOOR | 2 | |
| 98F71201001102 | HOLDING WRENCH | 3 | |
| 98F71201001108 | HOLDING WRENCH | 1 | |
| 98F71204001102 | HOLDING WRENCH | 1 | |
| 98L29003010000 | HOLDING TOOL-PYLON HOSES | 1 | |
| 98L71203002000 | TOOL HOLDING - ENGINE MOUNTS RR | 1 | |
| 98L71203002001 | TOOL HOLDING-ENGINE MOUNTS RR | 3 | |
| 98L71203009000 | THRUST LINKS HOLDING TOOL | 1 | |
| 98S57002500000 | CABLE HOLDING STRAP | 9 | |
| 98V27309004000 | FIXTURE, HOLDING -ELEVATOR ACTUATORS | 4 | |
| 98a57104004202 | SPANNER HOLDING | 1 | |
| 990439 | Holding Fixture | 1 | |
| 9970-957-395 | HOLDING FIXTURE | 1 | |
| 9C1550 | HOLDING SECTOR | 1 | |
| 9MIT65-6088 | HOLDING AND REAMING UPPER REAR SPAR HORIZONTAL STA | 1 | |
| 9R7257 | FIXTURE, HOLDING ABRADABLE GRIND | 1 | |
| 9R7257G06 | FIXTURE HOLDING ABRADABLE GRIND | 1 | |
| A-C142391-1/02 | HOLDING FIXTURE | 1 | |
| A11006 | HOLDING FIXTURE | 3 | |
| A11119 | HOLDING TOOL HYD BLOC | 1 | |
| A11120 | HOLDING TOOL DRAG/STY | 1 | |
| A11126 | TOOL -HOLDING, STEERING ACTUATOR | 1 | |
| A143751-1-105 | HOLDING FIXTURE | 1 | |
| A16488 | HOLDING FIXTURE | 1 | |
| A2367 | MOTOR ASSEMBLY HOLDING FIXTURE | 1 | |
| A27046-24 | HOLDING FIXTURE | 1 | |
| A27054-14 | FIXTURE HOLDING GEAR, LE SLAT DRIVE | 1 | |
| A27114-6 | HOLDING PLATE | 1 | |
| A27119-1 | HOLDING FIXTURE EQUIPMENT - GEAR ASSEMBLY, LE SLAT DRIVE | 1 | |
| A27126-1 | HOLDING FIXTURE - INPUT ROD ASSEMBLY, ELEVATOR POWER CONTROL UNIT (PCU) | 3 | |
| A27126-1 | Holding Fixture (2IT) | 3 | |
| A300-27-60-00-0257 | TOOL-SPOILER HOLDING | 1 | |
| A300-27-81-00 | TOOL-HOLDING,SLAT DRIVE SHAFT, CTR WING BOX | 1 | |
| A300-27-81-00-0248 | HOLDING DEVICE-SLAT | 1 | |
| A32045-29 | HOLDING PIN | 1 | |
| A32058-1 | HOLDING FIXTURE - ACTUATOR LOCK, NOSE LANDING GEAR (NLG) | 1 | |
| A32059-13 | HOLDING EQUIPMENT - ACTUATOR, MAIN LANDING GEAR (MLG) DOOR | 1 | |
| A32059-27 | HOLDING EQUIPMENT - ACTUATOR, MAIN LANDING GEAR (MLG) DOOR | 1 | |
| A32084-1 | HOLDING FIXTURE - PISTON ROD, NOSE LANDING GEAR (NLG) LOCK ACTUATOR | 1 | |
| A32087-1 | FIXTURE - HOLDING, MAIN LANDING GEAR RETRACT ACTUA | 1 | |
| A32087-12 | FIXTURE - HOLDING, MAIN LANDING GEAR RETRACT ACTUATOR | 1 | |
| A3T27-010- 01FDX | HOLDER, THS ACTUATOR HOLDING TOOL | 1 | |
| A54013-1 | HOLDING FIXTURE - DIAGONAL BRACE | 1 | |
| A646184 | Holding Tool | 1 | |
| A646184 PM | HOLDING TOOL | 1 | |
| A646184PM | HOLDING TOOL | 1 | |
| A646287 | HOLDING FIXTURE | 1 | |
| A646607 | Holding Tool | 1 | |
| A646607PM | HOLDING TOOL | 1 | |
| A677141 | Holding Tool | 1 | |
| A78021-5 | HOLDING BLOCK | 1 | |
| A78021-7 | HOLDING FIXTURE - PISTON (A78021-7 INCLUDED IN A78021-45 AND A78021-46) | 1 | |
| AB24001-NW1 | CABLE HOLDING STRAP | 1 | |
| AB27001-VX9 | HOLDING WRENCH - AILERON SERVOCONTROL ADJUSTMENT | 1 | |
| AB32001-J7S | SPANNER - HOLDING | 1 | |
| AC143620-2-02 | HOLDING FIXTURE | 1 | |
| AD-1319 | HOLDING FIXTURE | 1 | |
| AD1319-9 | HOLDING FIXTURE | 2 | |
| AE5420 | FIXTURE HOLDING GENERATOR | 1 | |
| AE5459 | FIXTURE HOLDING | 1 | |
| AE6604 | HOLDING FIXTURE | 1 | |
| AF-SPO-6450/5719 | CUSTOM NORTEC SPO-6450 STYLE MANUAL BOLT HOLE PROBE 500KHz-2MHz with SPO-5719 STYLE HOLDING FIXTURE W/ 1/16" PER rEVOLUTION THREAD. | 1 | |
| AFDS-37425 | Holding Fixture | 1 | |
| AFNDT-1096/304SS | 9 STEP REFERENCE BLOCK WITH ACETAL(DELRIN) HOLDING BLOCK. MATERIAL: 304 STAINLESS STEEL. STEP SIZES: .020",.050",.080", .120", .160" , .200", .300", .500", .750" +/-.010". PAD SIZE = 1.0" x 1.0". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1096/625 | 9 STEP REFERENCE BLOCK WITH ACETAL(DELRIN) HOLDING BLOCK. MATERIAL: 625 INCONEL. STEP SIZES: .020",.050",.080", .120", .160" , .200", .300", .500", .750" +/-.010". PAD SIZE = 1.0" x 1.0". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1096/718 | 9 STEP REFERENCE BLOCK WITH ACETAL(DELRIN) HOLDING BLOCK. MATERIAL: 625 INCONEL. STEP SIZES: .020",.050",.080", .120", .160" , .200", .300", .500", .750" +/-.010". PAD SIZE = 1.0" x 1.0". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2009AL | 5 STEP WEDGE, 16mm, 17mm, 18mm, 19mm, 20mm, +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm square. Includes Delrin Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2037/7075T6 | 10 STEP WEDGE SUPPLIED WITH HOLDING BLOCK. STEP SIZES: .040", .080", .120", .160", .200", .240", .280", .320", .360", .400" +/-.001". Material: 7075-T6 ALUMINUM. PAD SIZE: .75" x .75". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2075/1018 | 5 STEP WEDGE .020", .040", .060", .080", .100". TOLERANCE +/-.001". MATERIAL: 4340 or 4130 CARBON STEEL . PAD SIZE:75"x.75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2075/AL-1 | 5 STEP WEDGE .020", .040", .060", .080", .100". TOLERANCE +/-.001". MATERIAL: 7075-T6 ALUMINUM .PAD SIZE: 75" x .75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2075/AL-2 | 5 STEP WEDGE .020", .040", .060", .080", .100". TOLERANCE +/-.001". MATERIAL: 2024-T3 ALUMINUM .PAD SIZE: 75" x .75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2075/INC | 5 STEP WEDGE .020", .040", .060", .080", .100". TOLERANCE +/-.001". MATERIAL: 718 INCONEL. PAD SIZE: 75" x .75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2075/TI | 5 STEP WEDGE .020", .040", .060", .080", .100". TOLERANCE +/-.001". MATERIAL: 6AL-4V TITANIUM . PAD SIZE: 75" x .75" .Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2075CS | 5 STEP WEDGE .020", .040", .060", .080", .100". TOLERANCE +/-.001". MATERIAL: 4340 CARBON STEEL . PAD SIZE:75"x.75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2075SS | 5 STEP WEDGE .020", .040", .060", .080", .100". TOLERANCE +/-.001". MATERIAL: 304 STAINLESS. PAD SIZE: 75" x .75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2090AL | 5 STEP WEDGE, 11mm, 12mm, 13mm, 14mm, 15mm, +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm square. Includes Delrin Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2119AL | 5 STEP WEDGE, 11mm, 12mm, 13mm, 14mm, 15mm, +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm square. Includes Delrin Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3013AL-1 | Metric 6 Step Wedge, 0.5mm, 1mm, 2mm, 3mm, 4mm, 5mm, +/- .05mm. Material: 2024-T3 Aluminum Supplied with Delrin Holding Block. Pad Size: 19mm x 19mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3045-2024T3 | 10 STEP REFERENCE BLOCK .010", .020", .030", .040", .050", .060", .070", .080", .090", .100", +/-.001" . Material: 7075-T6 ALUMINUM, Pad Size: .75" x 75" with Acetal( Delrin) holding block . Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3045-7075T6 | 10 STEP REFERENCE BLOCK .010", .020", .030", .040", .050", .060", .070", .080", .090", .100", +/-.001" . Material: 7075-T6 ALUMINUM, Pad Size: .75" x 75" with Acetal( Delrin) holding block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3045/1018 | 10 STEP REFERENCE BLOCK, Step Pad Thicknesses: .010", .020", .030", .040", .050", .060", .070", .080", .090", .100", +/-.001" . Material: 1018 Steel, Pad Size: .75" x 75" with Acetal( Delrin) holding block. Includes Test Report and Certificate of Confo | 1 | |
| AFNDT-3063/13-8PH | 5 STEP CALIBRATION BLOCK, INCLUDES ACETAL(DELRIN) HOLDING BLOCK. PAD SIZE 1.0" x1.0", STEP SIZE: .020", .040", .060", .080", .100", .150, .200, .300 +/- .010" 13-8PH STAINLESS STEEL. Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-3063/15-5PH | 8 STEP CALIBRATION BLOCK, INCLUDES ACETAL(DELRIN) HOLDING BLOCK. PAD SIZE 1.0" x1.0", STEP SIZE: .020", .040", .060", .080", .100", .150, .200, .300 +/- .010" 15-5PH STAINLESS STEEL. Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-3063/17-4PH | 8 STEP CALIBRATION BLOCK, INCLUDES ACETAL(DELRIN) HOLDING BLOCK. PAD SIZE 1.0" x1.0", STEP SIZE: .020", .040", .060", .080", .100", .150, .200, .300 +/- .010" 17-4PH STAINLESS STEEL. Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-3064/2024AL | 7 STEP REFERENCE BLOCK WITH ACETAL( DELRIN ) HOLDING BLOCK. STEP PAD SIZE: 1.0" X 1.0". MATERIAL: 2024-T3 ALUMINUM. STEP RANGE:.020", .040", .060", .080", .100", .150", .200" +/- .002". Includes certification report traceable to NIST. | 1 | |
| AFNDT-3064/6061AL | 7 STEP REFERENCE BLOCK WITH ACETAL( DELRIN ) HOLDING BLOCK. STEP PAD SIZE: 1.0" X 1.0". MATERIAL: 6061-T6 ALUMINUM. STEP RANGE:.020", .040", .060", .080", .100", .150", .200" +/- .002". Includes certification report traceable to NIST. | 1 | |
| AFNDT-3064/7075AL | 7 STEP REFERENCE BLOCK WITH ACETAL( DELRIN ) HOLDING BLOCK. STEP PAD SIZE: 1.0" X 1.0". MATERIAL: 7075-T6 ALUMINUM. STEP RANGE:.020", .040", .060", .080", .100", .150", .200" +/- .002". Includes certification report traceable to NIST. | 1 | |
| AFNDT-3067/15-5PH | 8 STEP CALIBRATION BLOCK, INCLUDES ACETAL(DELRIN) HOLDING BLOCK. PAD SIZE 1.0" x1.0", STEP SIZE: .015", .030", .050", .080", .120", .160, .200, .300 +/- .005" Material: 15-5PH STEEL. Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-3067/6AL4V | 8 STEP CALIBRATION BLOCK, INCLUDES ACETAL(DELRIN) HOLDING BLOCK. PAD SIZE 1.0" x1.0", STEP SIZE: .015", .030", .050", .080", .120", .160, .200, .300 +/- .005" 15-5PH STAINLESS STEEL. Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-3068/4130 | 7 STEP REFERENCE BLOCK WITH ACETAL( DELRIN ) HOLDING BLOCK. STEP PAD SIZE: 1.0" X 1.0". MATERIAL: 4130 STEEL. STEP RANGE:.020", .050", .080", .120", .160", .200", .300" +/- .010". Includes certification report traceable to NIST. | 1 | |
| AFNDT-3192AL | 10 STEP REFERENCE BLOCK .020", .040", .060", .080", .100", .120", .140", .160", .180", .200" +/-.001" 7075-T6 ALUMINUM .75" x .75" STEP PAD With Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3193AL | 10 STEP REFERENCE BLOCK .020", .040", .060", .080", .100", .120", .140", .160", .180", .200" +/-.001" 2024-T3 ALUMINUM .75" x .75" STEP PAD With Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3194TI | 10 STEP REFERENCE BLOCK .020", .040", .060", .080", .100", .120", .140", .160", .180", .200" +/-.001" 6AL-4V TITANIUM .75" x .75" STEP PAD With Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3195S | 10 STEP REFERENCE BLOCK .020", .040", .060", .080", .100", .120", .140", .160", .180", .200" +/-.001" CARBON STEEL .75" x .75" STEP PAD With Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3207CS | 5 Step Block. Material: 1018 Steel. Steps: 0.45mm, 0.50mm, 1.0mm, 2.5mm, 5.0mm. Tolerance: ± 0.02mm. Pad Size: 15.0mm x 15.0mm. Tolerance: ± 0.5mm. Surface Finish: Ra 0.8 µm (32 µin.) max. Supplied with Delrin Holding Block. Includes Test Report and Certi | 1 | |
| AFNDT-3243AL | 8 STEP WEDGE, 2mm, 4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm +/- .05mm. Material: 2024-T3 Aluminum. Pad Size: 19mm x 19mm square. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3244AL | 8 STEP WEDGE, 2mm, 4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 19mm x 19mm square. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3245AL | 8 STEP WEDGE, 14mm, 16mm, 18mm, 20mm, 22mm, 24mm, 26mm, 28mm +/- .05mm. Material: 2024-T3 Aluminum. Pad Size: 19mm x 19mm square. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3246AL | 8 STEP WEDGE, 14mm, 16mm, 18mm, 20mm, 22mm, 24mm, 26mm, 28mm +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 19mm x 19mm square. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3252AL | 9 STEP THICKNESS STANDARD. STEP SIZES: .015", .025", .035", .045", .055", .065", .075", .085", .095" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 7075-T6 ALUMINUM.Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certifica | 1 | |
| AFNDT-3252CS | 9 STEP THICKNESS STANDARD. STEP SIZES: .015", .025", .035", .045", .055", .065", .075", .085", .095" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 4340 or 4130 Carbon Steel.Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and | 1 | |
| AFNDT-3252TI | 9 STEP THICKNESS STANDARD. STEP SIZES: .015", .025", .035", .045", .055", .065", .075", .085", .095" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 6AL-4V TITANIUM. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certifica | 1 | |
| AFNDT-3253AL | 9 STEP WEDGE, 0.38mm, 0.64mm, 0.89mm, 1.14mm, 1.40mm, 1.65mm, 1.91mm, 2.16mm, 2.41mm +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 19mm x 19mm square. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certificate of Confo | 1 | |
| AFNDT-3253CS | 9 STEP WEDGE, 0.38mm, 0.64mm, 0.89mm, 1.14mm, 1.40mm, 1.65mm, 1.91mm, 2.16mm, 2.41mm +/- .05mm. Material: 4340 or 4130 Carbon Steel. Pad Size: 19mm x 19mm square. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certificate | 1 | |
| AFNDT-3253TI | 9 STEP WEDGE, 0.38mm, 0.64mm, 0.89mm, 1.14mm, 1.40mm, 1.65mm, 1.91mm, 2.16mm, 2.41mm +/- .05mm. Material: 6Al-4v Titanium. Pad Size: 19mm x 19mm square. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certificate of Confor | 1 | |
| AFNDT-3289AL | Custom Metric 6 Step Block. Step Thicknesses of 1.0mm, 1.2mm, 1.4mm, and1.6mm. (Tolerance: +/- 0.02mm). Pad Size: 15mm X 15mm, (Tolerance: +/- 0.5mm) Material: 7075-T6 Aluminum with Delrin Holding Block. Includes Certification Report and Certificate | 1 | |
| AFNDT-3293/400 | 6 STEP WEDGE, .025", .050",. 100", .150", .200", 300" MATERIAL: MONEL 400. PAD SIZE: 1.50" X 1.50" TOLEREANCE = +/- .001. Includes Delrin Holding Block and Certification Report. | 1 | |
| AFNDT-3293/625I | 6 STEP WEDGE, .025", .050",. 100", .150", .200", 300" MATERIAL: 625 inconel. PAD SIZE: 1.50" X 1.50" TOLEREANCE = +/- .001. Includes Delrin Holding Block and Certification Report. | 1 | |
| AFNDT-3293/718I | 6 STEP WEDGE, .025", .050",. 100", .150", .200", 300" MATERIAL: 718 inconel. PAD SIZE: 1.50" X 1.50" TOLEREANCE = +/- .001. Includes Delrin Holding Block and Certification Report. | 1 | |
| AFNDT-3294/718I | 6 STEP WEDGE, .050", .100", .150", .200", .250", 300" MATERIAL: 718 inconel. PAD SIZE: 1.50" X 1.50" TOLEREANCE = +/- .001. Includes Delrin Holding Block and Certification Report. | 1 | |
| AFNDT-3336/600 | 4 STEP WEDGE .040, .060, .080, .100 +/-.001 INCONEL 600 . PAD SIZE:75" x .75" SUPPLIED WITH DELRIN HOLDING BLOCK. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3337AL | 5 STEP WEDGE .020", .030", .040", .050", .060". TOLERANCE +/-.001". MATERIAL: 7075-T6 ALUMINUM .PAD SIZE: 75" x .75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3341AL | 9 STEP REFERENCE BLOCK WITH ACETAL(DELRIN) HOLDING BLOCK. MATERIAL: 7075-T6 ALUMINUM. STEP SIZES: .030",.050",.080", .120", .160" , .200", .300", .400", .500" +/-.001". PAD SIZE = .75" x .75". Supplied with Delrin(Acetal) Holding Block. Includes Test Repo | 1 | |
| AFNDT-3341CS | 9 STEP REFERENCE BLOCK WITH ACETAL(DELRIN) HOLDING BLOCK. MATERIAL: 4340 STEEL. STEP SIZES: .030",.050",.080", .120", .160" , .200", .300", .400", .500" +/-.001". PAD SIZE = 1.0" x 1.0". Supplied with Delrin(Acetal) Holding Block. Includes Test Report and | 1 | |
| AFNDT-3341INC | 9 STEP REFERENCE BLOCK WITH ACETAL(DELRIN) HOLDING BLOCK. MATERIAL: 718 INCONEL. STEP SIZES: .030",.050",.080", .120", .160" , .200", .300", .400", .500" +/-.001". PAD SIZE = .75" x .75". Supplied with Delrin(Acetal) Holding Block. Includes Test Report an | 1 | |
| AFNDT-3341SS | 9 STEP REFERENCE BLOCK WITH ACETAL(DELRIN) HOLDING BLOCK. MATERIAL: 304 STAINLESS STEEL. STEP SIZES: .030",.050",.080", .120", .160" , .200", .300", .400", .500" +/-.001". PAD SIZE = 1.0" x 1.0". Supplied with Delrin(Acetal) Holding Block. Includes Test R | 1 | |
| AFNDT-3341TI | 9 STEP REFERENCE BLOCK WITH ACETAL(DELRIN) HOLDING BLOCK. MATERIAL: 6AL-4V TITANIUM. STEP SIZES: .030",.050",.080", .120", .160" , .200", .300", .400", .500" +/-.001". PAD SIZE = .75" x .75". Supplied with Delrin(Acetal) Holding Block. Includes Test Repor | 1 | |
| AFNDT-3343/2024T3 | 6 STEP WEDGE .010", .030", .050", .070", .090", .125" +/-.001", 2024-T3 ALUMINUM 0.75" x 0.75" STEP PAD. SUPPLIED WITH HOLDING BLOCK. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3343/7075T6 | 6 STEP WEDGE .010", .030", .050", .070", .090", .125" +/-.001", 7075-T6 ALUMINUM 0.75" x 0.75" STEP PAD. SUPPLIED WITH HOLDING BLOCK. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3345AL | 5 STEP THICKNESS STANDARD. STEP SIZES: .020", .050", .100", .150", .200", +/-.002". MATERIAL: 2024-T3 ALUMINUM. SUPPLIED WITH DELRIN HOLDING BLOCK. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3348/2024T3 | 7 STEP METRIC WEDGE: Step Sizes: 1mm, 3mm, 5mm, 10mm, 15mm, 20mm, 25mm +/- .05mm . Pad Size: 20mm x 20mm. Supplied With Holding Block. Material- 2024-T351 Aluminum (Surface Anodized for Corrosion Protection). Includes Test Report and Certificate of Confor | 1 | |
| AFNDT-3348/4340 | 7 STEP METRIC WEDGE: Step Sizes: 1mm, 3mm, 5mm, 10mm, 15mm, 20mm, 25mm +/- .05mm . Pad Size: 20mm x 20mm. Supplied With Holding Block. Material- 4340 Steel (Nickle Plated for Corrosion Protection). Includes Test Report and Certificate of Conformance. Manu | 1 | |
| AFNDT-3348/7075T6 | 7 STEP METRIC WEDGE: Step Sizes: 1mm, 3mm, 5mm, 10mm, 15mm, 20mm, 25mm +/- .05mm . Pad Size: 20mm x 20mm. Supplied With Holding Block. Material- 7075-T6 Aluminum (Surface Anodized for Corrosion Protection). Includes Test Report and Certificate of Conforma | 1 | |
| AFNDT-3348/TA6V | 7 STEP METRIC WEDGE: Step Sizes: 1mm, 3mm, 5mm, 10mm, 15mm, 20mm, 25mm +/- .05mm . Pad Size: 20mm x 20mm. Supplied With Holding Block. Material- 6AL-4V Titanium. Includes Test Report and Certificate of Conformance. Manufactured in Accordance to ASTM E797 | 1 | |
| AFNDT-3350AL | 5 STEP WEDGE .020", .030", .040", .080", .090". TOLERANCE +/-.001". MATERIAL: 7075-T6 ALUMINUM .PAD SIZE: 75" x .75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3351AL | 8 STEP THICKNESS STANDARD. STEP SIZES: .015", .020", .025", .030", .035", .040", .045", .050" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 2024-T3 Aluminum. Supplied with Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3351AL-1 | 8 STEP THICKNESS STANDARD. STEP SIZES: .015", .020", .025", .030", .035", .040", .045", .050" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 7075-T6 Aluminum. Supplied with Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3351CS | 8 STEP THICKNESS STANDARD. STEP SIZES: .015", .020", .025", .030", .035", .040", .045", .050" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 1018 CARBON STEEL. Supplied with Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3359 | Custom 10 Step Block, supplied with holding block. Step Sizes: 2.5mm, 5.0mm, 7.5mm, 10.0mm, 12.5mm, 15.0mm, 17.5mm, 20.0mm, 22.5mm and 25.0mm, Thickness Tolerance ±.05mm. Pad Size: 20mm X 20mm. Material: Duplex 2205 Stainless Steel. Includes certificatio | 1 | |
| AFNDT-3385/2024T3 | 12 STEP WEDGE, STEP THICKNESS: .024", .040", .060", .080", .100", .150", .200", .300", .400", .500" .650", .800" +/-.001" 2024-T3 ALUMINUM SUPPLIED WITH A DELRIN HOLDING BLOCK. Includes Test Report and Certificate of Conformance | 1 | |
| AFNDT-3385/7075T6 | 12 STEP WEDGE, STEP THICKNESS: .024", .040", .060", .080", .100", .150", .200", .300", .400", .500" .650", .800" +/-.001" 7075-T6 ALUMINUM SUPPLIED WITH A DELRIN HOLDING BLOCK. Includes Test Report and Certificate of Conformance | 1 | |
| AFNDT-3388AL | Custom Metric 7 Step Block. Step Thicknesses: 0.5mm, 2.5mm, 4.5mm, 6.5mm, 8.5mm, 10.5mm & 12.5mm. (Tolerance: +/- 0.02mm). Pad Size: 20mm x 20mm. Material: 2024-T3 ALUMINUM. Supplied with Delrin Holding Block. Includes Certification Report for step thi | 1 | |
| AFNDT-3398AL | 9 STEP THICKNESS STANDARD. STEP SIZES: .020", .030", .040", .050", .060", .070", .080", .090", .100" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 7075-T6 ALUMINUM.Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certifica | 1 | |
| AFNDT-3401AL | 7 STEP WEDGE. STEP SIZES: .040", .050", .060", .070", .080", .090", .100" +/- .001". PAD SIZE: 1.0"x 1.0", MATERIAL: 7075-T6 ALUMINUM SUPPLIED WITH ACETAL(DELRIN) HOLDING BLOCK. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3401CS | 7 STEP WEDGE. STEP SIZES: .040", .050", .060", .070", .080", .090", .100" +/- .001". PAD SIZE: 1.0"x 1.0", MATERIAL: 1018 CARBON STEEL SUPPLIED WITH ACETAL(DELRIN) HOLDING BLOCK. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3404AL | 5 STEP WEDGE .030", .050", .070", .090", .110". TOLERANCE +/-.001". MATERIAL: 7075-T6 ALUMINUM .PAD SIZE: 75" x .75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3406-625 | 6 STEP CALIBRATION BLOCK, STEP SIZES .015", .020", .025", .030", .035", .040". MATERIAL: 625 Inconel. PAD SIZE: 1" X 1" X 6" ± .001". Supplied With Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3406AL | 6 STEP CALIBRATION BLOCK, STEP SIZES .015", .020", .025", .030", .035", .040". MATERIAL: 2024-T3 Aluminum. PAD SIZE: 1" X 1" X 6" ± .001". Supplied With Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3406AL-1 | 6 STEP CALIBRATION BLOCK, STEP SIZES .015", .020", .025", .030", .035" .040". MATERIAL: 7075-T6 Aluminum. PAD SIZE: 1" X 1" X 6" ± .001". Supplied With Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3409AL | 9 STEP WEDGE, 0.5mm, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 19mm x 19mm square Supplied with Acetal(Delrin) Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3409ST | 9 STEP WEDGE, 0.5mm, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .05mm. Material: 4340 Steel. Pad Size: 19mm x 19mm square Supplied with Acetal(Delrin) Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3409TI | 9 STEP WEDGE, 0.5mm, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .05mm. Material: 6AL-4V Titanium. Pad Size: 19mm x 19mm square Supplied with Acetal(Delrin) Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3414-625 | 6 STEP CALIBRATION BLOCK, STEP SIZES .050", .100", .200", .300", .400", .500". MATERIAL: 625 Inconel. PAD SIZE: 1" X 1" X 6" ± .001". Supplied With Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3417/2024T3 | 5 STEP WEDGE,0.25mm, 0.50mm, 0.75mm, 1.00mm, 1.25mm, +/- .02mm. Material: 2024-T3 Aluminum. Pad Size: 20mm x 20mm square Supplied With Acetal(Delrin) Holding Block Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3417/2024T42 | 5 STEP WEDGE,0.25mm, 0.50mm, 0.75mm, 1.00mm, 1.25mm, +/- .02mm. Material: 2024-T42 Aluminum. Pad Size: 20mm x 20mm square Supplied With Acetal(Delrin) Holding Block Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3417/304SS | 5 STEP WEDGE,0.25mm, 0.50mm, 0.75mm, 1.00mm, 1.25mm, +/- .02mm. Material: 304 nStainless Steel. Pad Size: 20mm x 20mm square Supplied With Acetal(Delrin) Holding Block Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3417/7075T6 | 5 STEP WEDGE,0.25mm, 0.50mm, 0.75mm, 1.00mm, 1.25mm, +/- .02mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm square Supplied With Acetal(Delrin) Holding Block Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3417/TI | 5 STEP WEDGE,0.25mm, 0.50mm, 0.75mm, 1.00mm, 1.25mm, +/- .02mm. Material: 6AL-4V Titanium. Pad Size: 20mm x 20mm square Supplied With Acetal(Delrin) Holding Block Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3418/2024T3 | 8 STEP WEDGE, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .02mm. Material: 2024-T3 Aluminum. Pad Size: 20mm x 20mm ±.05mm square Supplied With Acetal( Delrin ) Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3418/2024T42 | 8 STEP WEDGE, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .02mm. Material: 2024-T42 Aluminum. Pad Size: 20mm x 20mm ±.05mm square Supplied With Acetal( Delrin ) Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3418/304SS | 8 STEP WEDGE, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .02mm. Material: 304 Stainless Steel. Pad Size: 20mm x 20mm ±.05mm square Supplied With Acetal( Delrin ) Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3418/7075T6 | 8 STEP WEDGE, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .02mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm ±.05mm square Supplied With Acetal( Delrin ) Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3418/TI | 8 STEP WEDGE, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .02mm. Material: 6AL-4V Titanium. Pad Size: 20mm x 20mm ±.05mm square Supplied With Acetal( Delrin ) Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3432/2050AL | 7 STEP WEDGE .050", .100",. 150", .200", .250", .300", .350". MATERIAL: 2050 ALUMINUM. PAD SIZE: 1.0" x 1.0" TOLEREANCE = +/- .001. Supplied With Delrin Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3432/2195AL | 7 STEP WEDGE .050", .100",. 150", .200", .250", .300", .350". MATERIAL: 2195 ALUMINUM. PAD SIZE: 1.0" x 1.0" TOLEREANCE = +/- .001. Supplied With Delrin Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3432/6061AL | 7 STEP WEDGE .050", .100",. 150", .200", .250", .300", .350". MATERIAL: 6061 ALUMINUM. PAD SIZE: 1.0" x 1.0" TOLEREANCE = +/- .001. Supplied With Delrin Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3441AL | 10 STEP REFERENCE BLOCK SUPPLIED WITH DELRIN HOLDING BLOCK, STEP SIZES: .015", .025", .035", .045", .055", .065", .075", .085", .095",.105". PAD SIZE: 1.0" x 1.0". MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance | 1 | |
| AFNDT-3449/2024AL | 8 STEP WEDGE, STEP SIZES: .030", .040", .050", .060", .070", .080", .090", and .100" +/- .001". PAD SIZE: 1.0" x 1.0" Supplied With Delrin Holding Block. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3449/304SS | 8 STEP WEDGE, STEP SIZES: .030", .040", .050", .060", .070", .080", .090", and .100" +/- .001". PAD SIZE: 1.0" x 1.0" Supplied With Delrin Holding Block. MATERIAL: 304 STAINLESS STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3449/6AL-4V | 8 STEP WEDGE, STEP SIZES: .030", .040", .050", .060", .070", .080", .090", and .100" +/- .001". PAD SIZE: 1.0" x 1.0" Supplied With Delrin Holding Block. MATERIAL: 6AL-4V TITANIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3449/7075AL | 8 STEP WEDGE, STEP SIZES: .030", .040", .050", .060", .070", .080", .090", and .100" +/- .001". PAD SIZE: 1.0" x 1.0" Supplied With Delrin Holding Block. MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3454 | 5 STEP WEDGE .020", .040", .060", .080", .120". MATERIAL: 360 BRASS. PAD SIZE: 75" x .75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3462AL | 10 STEP REFERENCE BLOCK, Step Pad Thicknesses: .010", .020", .040", .060", .080", .100", .150", .200", .250", .300", +/-.001" . Material: Anodized 7075-T6 ALUMINUM, Pad Size: .75" x 75" with Acetal( Delrin) holding block. Includes Test Report and Ce... | 1 | |
| AFNDT-3477AL | METRIC 10 STEP ALUMINUM CALIBRATION BLOCK, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm ± .05mm. Pad Size: 25mm X 25mm. Material: 2024-T3 Aluminum Supplied with a Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3477CS | METRIC 10 STEP CARBON STEEL CALIBRATION BLOCK, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm ± .05mm. Pad Size: 25mm X 25mm. Material: 1018 or 4340 Carbon Steel Supplied with a Delrin Holding Block. Includes Test Report and Certificate of Conform... | 1 | |
| AFNDT-3477TI | METRIC 10 STEP TITANIUM CALIBRATION BLOCK, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm ± .05mm. Pad Size: 25mm X 25mm. Material: 6AL-4V Titanium Supplied with a Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3478TI | 5 STEP WEDGE .024", .040", .060", .080", .100". TOLERANCE +/-.002". ..MATERIAL: 6AL-4V TITANIUM . PAD SIZE: 75" x .75" .Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3479TI | 7 STEP CALIBRATION BLOCK. MATERIAL: 6AL-4V TITANIUM. STEP THICKNESS: 0.024", 0.040", 0.060", 0.800", 0.100", .150" 0.200" +/- .001". STEP PAD SIZE: .75" x .75". Note: The first and last pad is 1.0" long. Supplied With Delrin Holding Block Includes certi | 1 | |
| AFNDT-3482AL | 5 STEP CALIBRATION BLOCK, 7075-T6 ALUMINUM. STEP SIZES: .098", .197", .295", .394", .492" ± .001". PAD SIZE: 1.0" x 1.0". Supplied with Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3482AL-1 | 5 STEP CALIBRATION BLOCK, 7075-T6 ALUMINUM. STEP SIZES: .020", .039", .059", .079", .098" ± .001". PAD SIZE: 1.0" x 1.0". Supplied with Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3486/15-5PH | 8 STEP WEDGE, STEP SIZES: 0.125", 0.150", 0.289", 0.300", 0.350", 0.476", 0.500", 0.650" +/- .001". PAD SIZE: 1.0" x 1.0". MATERIAL: 15-5PH STAINLESS STEEL SUPPLIED WITH DELRIN HOLDING BLOCK. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3487/4130 | 5 STEP WEDGE .050", .100", .200", .400", .500". TOLERANCE +/-.001". MATERIAL: 4130 STEEL SUPPLIED WITH HOLDING BLOCK. PAD SIZE: 1.0" x 1.0" . Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3487/TI | 5 STEP WEDGE .050", .100", .200", .400", .500". TOLERANCE +/-.001". MATERIAL: 6AL-4V TITANIUM SUPPLIED WITH HOLDING BLOCK. PAD SIZE: 1.0" x 1.0" . Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3488/AL | 5 STEP WEDGE .032", .064", .128", .256", .500". TOLERANCE +/-.001". MATERIAL: 7075-T6 ALUMINUM SUPPLIED WITH HOLDING BLOCK. PAD SIZE: 1.0" x 1.0" . Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3489/AL | 9 STEP WEDGE: .010", .020" .032", .040", .050", .064", .128", .256", .500". TOLERANCE +/-.001". MATERIAL: 2024-T3 ALUMINUM SUPPLIED WITH HOLDING BLOCK. PAD SIZE: 1.0" x 1.0" . Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3491AL | METRIC 6 STEP WEDGE. STEP SIZE: 0.6mm, 1mm, 3mm, 7mm, 13mm, 20mm +/- .03mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm square Supplied With Acetal(Delrin) Holding Block Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3496CS | 8 STEP WEDGE, STEP SIZES: .020", .025", .030", .040", .050", .060", .080", and .100" +/- .001". PAD SIZE: .75" x .75" Supplied With Delrin Holding Block. MATERIAL: 4340 Steel . Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3496TI | 8 STEP WEDGE, STEP SIZES: .020", .025", .030", .040", .050", .060", .080", and .100" +/- .001". PAD SIZE: .75" x .75" Supplied With Delrin Holding Block. MATERIAL: 6AL-4V TITANIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3521AL | 5 STEP METRIC WEDGE , 2mm, 4mm, 6mm, 8mm, 10mm, +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 19mm x 19mm square Supplied with Delrin Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3537AL | METRIC 5 STEP WEDGE. STEP SIZES: 0.40mm, 0.65mm, 1.3mm, 2.0mm, 2.5mm STEP TOLERANCE +/-.03mm(.00118"). MATERIAL: 2024-T3 ALUMINUM .PAD SIZE: 25mm x .25mm. Supplied with Delrin Holding Block. Includes Test Report traceable to NIST, Mill Certificate f... | 1 | |
| AFNDT-3542AL | METRIC 5 STEP WEDGE 0.6mm(.024"),5.44mm( .214"),10.26mm( .404"),15.09mm( .594"), 20mm(.787"). TOLERANCE +/-.001". MATERIAL: 7075-T6 ALUMINUM .PAD SIZE: 75" x .75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certif... | 1 | |
| AFNDT-3544/2219-T8 | 10 STEP REFERENCE BLOCK .038, .045, .055, .065, .080, .100, .125, .150", .175", .200", ± .001" Supplied with Delrin Holding Block... Pad Size: .800" x .800" ± 0.010" Material: 2219-T8. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3547CS | 5 STEP WEDGE, .020", .030", .040", .050", .060". TOLERANCE +/-.001". MATERIAL: 4340 Steel . PAD SIZE: .75" x .75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3548/7075 | 5 STEP WEDGE, 1mm, 3mm, 5mm, 7mm, 10mm, +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm square supplied with Delrin Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3558/7075T6 | 10 STEP WEDGE SUPPLIED WITH DELRIN HOLDING BLOCK. STEP SIZES: .020", .040", .60", .80", .100", .120", .140", .160", .180", .200" +/-.001". Material: 7075-T6 ALUMINUM. PAD SIZE: .75" x .75". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3561AL | CUSTOM 3 STEP CALIBRATION BLOCK, 2024-T3 ALUMINUM... STEP PAD SIZE: 25.0mm x 25.0mm. STEP THICKNESSES: 0.3mm, 0.5mm and 0.8mm ± 0.03mm. Supplied with Protective Acetal Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFT6355C0001-01-05 | HOLDING FIXTURE | 1 | |
| AGE 13856 | HOLDING FIXTURE | 1 | |
| AGE 13861 | HOLDING FIXTURE | 1 | |
| AGE 13875 | HOLDING FIXTURE | 1 | |
| AGE-02901-001 | FIXTURE, HOLDING | 1 | |
| AGE-04908-401 | THRUST REVERSER HOLDING ROD | 1 | |
| AGE-10032 | FIXTURE, HOLDING | 3 | |
| AGE-10040 | HOLDING FIXTURE | 2 | |
| AGE-10043 | FIXTURE, ASSEMBLY HOLDING | 2 | |
| AGE-10048 | FIXTURE, HOLDING | 5 | |
| AGE-10061 | FIXTURE HOLDING | 1 | |
| AGE-10082 | FIXTURE, HOLDING | 2 | |
| AGE-10341 | FIXTURE, HOLDING | 3 | |
| AGE-10346 | HOLDING FIXTURE | 3 | |
| AGE-10371 | FIXTURE, HOLDING | 3 | |
| AGE-10379 | FIXTURE ASSEMBLY, HOLDING | 2 | |
| AGE-10397 | FIXTURE, HOLDING | 3 | |
| AGE-10774 | FIXTURE, HOLDING | 2 | |
| AGE-10778 | FIXTURE, HOLDING | 3 | |
| AGE-10784 | FIXTURE, HOLDING | 3 | |
| AGE-11432 | FIXTURE ASSEMBLY, HOLDING. FIXED WOBBLER | 2 | |
| AGE-11812 | HOLDING STAND, PIN ASSEMBLY | 2 | |
| AGE-11848 | FIXTURE, HOLDING, ROTOR | 2 | |
| AGE10023 | HOLDING FIXTURE | 3 | |
| AGE10032 | ASSEMBLY HOLDING FIXTURE | 3 | |
| AGE10038 | HOLDING FIXTURE | 2 | |
| AGE10040 | Holding Fixture | 2 | |
| AGE10043 | ASSEMBLY HOLDING FIXTURE | 2 | |
| AGE10043A | ASSEMBLY HOLDING FIXTURE | 1 | |
| AGE10048 | FIXTURE, HOLDING | 5 | |
| AGE10055 | HOLDING FIXTURE | 2 | |
| AGE10061 | FIXTURE HOLDING | 1 | |
| AGE10061 (FDS-45382) | Holding Fixture | 1 | |
| AGE10079 | HOLDING FIXTURE | 1 | |
| AGE10082 | HOLDING FIXTURE | 2 | |
| AGE10136 | HOLDING FIXTURE | 2 | |
| AGE10158 | HOLDING FIXTURE ASSEMBLY | 1 | |
| AGE10239 | FIXTURE HOLDING | 1 | |
| AGE10242 | FIXTURE HOLDING | 1 | |
| AGE10247 | FIXTURE HOLDING | 1 | |
| AGE10259 | FIXTURE HOLDING | 1 | |
| AGE10332 | FIXTURE HOLDING | 2 | |
| AGE10337 | FIXTURE ASSY, HOLDING | 2 | |
| AGE10341 | HOLDING FIXTURE | 3 | |
| AGE10346 | HOLDING FIXTURE | 3 | |
| AGE10347 | Assembly Holding Fixture | 1 | |
| AGE10348 | Holding Fixture | 1 | |
| AGE10353 | HOLDING FIXTURE | 1 | |
| AGE10356 | HOLDING FIXTURE | 1 | |
| AGE10358 | HOLDING FIXTURE | 2 | |
| AGE10371 | HOLDING FIXTURE | 3 | |
| AGE10375 | FIXTURE, HOLDING | 2 | |
| AGE10379 | ASSEMBLY HOLDING FIXTURE | 2 | |
| AGE10381 | Rotor Holding Fixture | 1 | |
| AGE10396 | ASSEMBLY HOLDING FIXTURE | 1 | |
| AGE10397 | HOLDING FIXTURE | 3 | |
| AGE10400 | Holding Fixture | 1 | |
| AGE10402 | Holding Fixture | 1 | |
| AGE10774 | HOLDING FIXTURE | 2 | |
| AGE10778 | HOLDING FIXTURE | 3 | |
| AGE10782 | HOLDING FIXTURE | 1 | |
| AGE10784 | HOLDING FIXTURE | 3 | |
| AGE10786 | HOLDING FIXTURE | 1 | |
| AGE10794 | HOLDING FIXTURE | 1 | |
| AGE10808 | HOLDING FIXTURE | 1 | |
| AGE10815 | FIXTURE HOLDING | 2 | |
| AGE11246 | ROTOR HOLDING FIXTURE | 1 | |
| AGE11289 | HOLDING FIXTURE | 1 | |
| AGE11330 | HOLDING FIXTURE | 1 | |
| AGE11402 | HOLDING FIXTURE | 1 | |
| AGE11406 | FIXTURE, HOLDING | 1 | |
| AGE11432 | FIXED WOBBLER HOLDING FIXTURE | 2 | |
| AGE11591 | ASSEMBLY HOLDING FIXTURE | 1 | |
| AGE11596 | HOLDING FIXTURE | 2 | |
| AGE11598 | ASSEMBLY HOLDING FIXTURE | 1 | |
| AGE11603 | ASSEMBLY HOLDING FIXTURE | 1 | |
| AGE11636 | Rotor Holding Fixture Insert | 2 | |
| AGE11667 | HOLDING FIXTURE ASSEMBLY, ROTOR | 2 | |
| AGE11812 | HOLDING STAND | 2 | |
| AGE11813 | FIXTURE, ASSEMBLY HOLDING | 2 | |
| AGE11813PM | DISCONNECT HOLDING FIXTURE | 1 | |
| AGE11821 | HOLDING FIXTURE | 1 | |
| AGE11821PM | HOLDING FIXTURE | 1 | |
| AGE11848 | FIXTURE HOLDING | 2 | |
| AGE11855 | HOLDING FIXTURE | 2 | |
| AGE12172 | HOLDING FIXTURE | 1 | |
| AGE12184 | FIXTURE HOLDING | 1 | |
| AGE12196 | Holding Fixture | 2 | |
| AGE12243 | HOLDING FIXTURE | 1 | |
| AGE12373-9 | Rotor Holding Fixture Insert | 1 | |
| AGE12747 | HOLDING FIXTURE | 1 | |
| AGE12887 | HOLDING FIXT | 1 | |
| AGE12917 | HOLDING FIXTURE | 2 | |
| AGE12925 | holding fixture | 1 | |
| AGE12964 | HOLDING FIXTURE | 3 | |
| AGE13116 | DISCONNECT HOLDING FIXTURE | 2 | |
| AGE13241 | HOLDING FIXTURE | 2 | |
| AGE13255 | ADAPTER, ASSY., HOLDING FIXTURE-T50 AMAD | 1 | |
| AGE13278 | HOLDING FIXTURE | 1 | |
| AGE13279 | HOLDING FIXTURE | 2 | |
| AGE13403 | FIXTURE, DISCONNECT HOLDING | 1 | |
| AGE13570 | FIXTURE ASSEMBLY, HOLDING | 1 | |
| AGE13578 | FIXTURE ASSEMBLY, HOLDING | 1 | |
| AGE13581 | FIXTURE, HOLDING, ASSEMBLY | 1 | |
| AGE13856 | HOLDING FIXTURE | 1 | |
| AGE13859 | HOLDING FIXTURE | 1 | |
| AGE13861 | HOLDING FIXTURE | 1 | |
| AGE13875 | HOLDING FIXTURE | 1 | |
| AGE13934 | FIXTURE, ASSY HOLDING | 1 | |
| AGE14038 | HOLDING FIXTURE | 2 | |
| AGE14074 | HOLDING FIXTURE | 2 | |
| AGE14075 | FIXTURE, ASSEMBLY HOLDING | 2 | |
| AGE14076 | HOLDING FIXTURE, ASSEMBLY | 2 | |
| AGE14077 | FIXTURE, HOLDING, ASSEMBLY | 2 | |
| AGE14078 | Holding Fixture | 1 | |
| AGE14079 | FIXTURE, HOLDING | 1 | |
| AGE14091 | STAND, HOLDING | 2 | |
| AGE14758 | FIXTURE, HOLDING | 1 | |
| AGE14773 | FIXTURE, HOLDING | 1 | |
| AGE14893 | ASSEMBLY, HOLDING FIXTURE | 1 | |
| AGE14900 | ASSEMBLY, STRAINER HOLDING FIXTURE | 1 | |
| AGE15187 | PRESSURE DROP HOLDING FIXTURE | 1 | |
| AGE15835 | HOLDING FIXTURE | 1 | |
| AGE15901 | HOLDING FIXTURE | 1 | |
| AGE160099 | HOLDING FIXTURE | 1 | |
| AGE16099 | HOLDING FIXTURE | 1 | |
| AGE16269 | FIXTURE, HOLDING, FLYWEIGHT | 1 | |
| AGE16271 | FIXTURE, HOLDING | 1 | |
| AGE16274 | FIXTURE, HOLDING | 1 | |
| AGE16277 | FIXTURE, HOLDING | 1 | |
| AGE16392 | HOLDING FIXTURE, PRIMARY HEAT EXCHANGER | 1 | |
| AGE16560 | FIXTURE, HOLDING | 1 | |
| AGE16700 | Holding Fixture | 1 | |
| AGE16701 | Holding Fixture | 1 | |
| AGE16837 | Holding Fixture | 1 | |
| AGE17319 | Holding Fixture | 1 | |
| AGE17630 | FIXTURE, HOLDING, BEARING LINER REMOVAL | 1 | |
| AGE17633 | FIXTURE, HOLDING, BEARING LINER INSTALL | 1 | |
| AGE17638 | Fixture, Holding, Bearing Liner Removal | 1 | |
| AGE17639 | Fixture, Holding Bearing Liner Install | 1 | |
| AGE18810 | HOLDING BLOCK | 1 | |
| AGEI0032 | FIXTURE, HOLDING | 1 | |
| AGEI0040 | HOLDING FIXTURE | 1 | |
| AGEI0043 | FIXTURE, ASSEMBLY HOLDING | 1 | |
| AGEI0048 | FIXTURE, HOLDING | 1 | |
| AGEI006I | FIXTURE HOLDING | 1 | |
| AGEI0082 | FIXTURE, HOLDING | 1 | |
| AGEI0346 | HOLDING FIXTURE | 1 | |
| AGEI034I | FIXTURE, HOLDING | 1 | |
| AGEI0379 | FIXTURE ASSEMBLY, HOLDING | 1 | |
| AGEI037I | FIXTURE, HOLDING | 1 | |
| AID-01193 | TIE BOLT HOLDING SUPPORT | 1 | |
| AIT320016 | HOLDING FIXTURE | 1 | |
| AJ65B80482 | HOLDING FIXTURE - QUADRANT ASSEMBLY, ELEVATOR CONTROL | 1 | |
| AJ65B81127 | FIXTURE - HOLDING | 1 | |
| AJ65B81128 | FIXTURE - HOLDING | 1 | |
| AJ65B81129 | FIXTURE - HOLDING | 1 | |
| AKS-19990 | Holding Fixture | 1 | |
| AKS19990 | HOLDING FIXTURE | 1 | |
| APC100-3-10 | HOLDING FIXTURE | 1 | |
| APN 801308-S58-2 | Valve Holding Fixture | 1 | |
| APN 803213-S58-10 | Valve Holding Fixture | 1 | |
| APN 803213-S58-2 | VALVE HOLDING FIXTURE /TEST FIXTURE | 1 | |
| APN803212-S91-3 | VALVE HOLDING FIXTURE/TEST FIXTURE | 1 | |
| APN803213-S58-2 | VALVE HOLDING FIXTURE | 1 | |
| ARG7076-5511 | Metering Valve Test / Holding Fixture | 2 | |
| ASI-18-9B | Capstan Fixture Holding | 4 | |
| ASP180 | AIR START CONTINUOUS FLOW (TRILECTRON INDUSTRIES, INC. (DIV. GSE HOLDINGS INC)) | 1 | |
| AST4844 | CAMSHAFT SPR HOLDING TOOL PINS | 1 | |
| AST5217 | UNIVERSAL HUB HOLDING TOOL | 1 | |
| AST7200-1 | ONE BARBELL HOLDING PIN | 1 | |
| AST7200-2 | ONE 3 STEP HOLDING PIN | 1 | |
| AST7200-3 | ONE SINGLE HOLDING PIN | 1 | |
| AT-55356 | VERTICAL HOLDING CART | 1 | |
| AT-911483 | FIXTURE, HOLDING | 1 | |
| AT27804 | HOLDING FIXTURE | 1 | |
| AT31811 | NLG FIXTURE (HOLDING & TESTING) | 1 | |
| AT5238 | HOLDING FIXTURE | 1 | |
| AT5368 | HOLDING FIXTURE, PART | 1 | |
| B27022 | HOLDING TOOL - ELEV CABLE TENSION REG. RIGGING | 1 | |
| B27022 REV B | HOLDING TOOL - ELEV CABLE TENSION REG. RIGGING | 1 | |
| B27022-16 | HOLDING TOOL - ELEVATOR CABLE TENSION REGULATOR RIGGING | 3 | |
| B27022-16-HM | HYDRO MFD PARTS -0 HOLDING TOOL | 1 | |
| B27022-4 | HOLDING TOOL - ELEVATOR CABLE TENSION REGULATOR RIGGING | 3 | |
| B27034-2 | INDICATOR HOLDING FIXTURE | 1 | |
| B29002-1 | HOLDING FIXTURE | 14 | |
| BDS-34332 | Holding Fixture | 1 | |
| BM61-101 | IRDS HOLDING DOLLY 1730-01-029-8709 | 1 | |
| BRE-53830 | HOLDING FIXTURE | 1 | |
| BRE53830 | HOLDING FIXTURE | 1 | |
| BRHC1 | BRAKE ROTOR HOLDING CLIP | 1 | |
| BRHC2PK | BRAKE ROTOR HOLDING CLIP SET | 1 | |
| C02040910-SFIX01-0001 | Tool Horizontal Stab Holding | 1 | |
| C067-00-0131 | HOLDING FIXTURE | 1 | |
| C104-00-0014 | HOLDING FIXTURE | 1 | |
| C117-00-0290 | HOLDING FIXTURE PP/M | 1 | |
| C117-00-0291 | HOLDING FIXTURE | 1 | |
| C117-00-0302 | HOLDING FIXTURE | 1 | |
| C117-00-0920 | HOLDING FIXTURE | 1 | |
| C24839010-HF | HOLDING FIXTURE | 1 | |
| C27023-1 | HOLDING FIXTURE - LEADING EDGE SLAT ACTUATOR | 1 | |
| C27047-41 | Holding Fixture | 24 | |
| C27079-1 | Holding Equipment - Trailing Edge Inboard Flap | 7 | |
| C32008-1 | HOLDING FIXTURE - MLG DAMPER | 3 | |
| C32027 | Lever Assembly Holding Fixture | 1 | |
| C32027-1 | Holding Fixture Equipment - Functional Test, Landing Gear Control Lever | 2 | |
| C32027-2 | Holding Fixture Equipment - Functional Test, Landing Gear Control Lever | 2 | |
| C32027-3 | Holding Fixture Equipment - Functional Test, Landing Gear Control Lever | 3 | |
| C32037 | HOLDING FIXTURE MAIN LANDING GEAR | 1 | |
| C32037-1 | Holding Fixture - Main Landing Gear | 10 | |
| C32037-1-M | HOLDING FIXTURE | 1 | |
| C32037-46 | HOLDING FIXTURE - MAIN LANDING GEAR | 1 | |
| C32045-1 | HOLDING FIXTURE | 3 | |
| C32045-23 | Holding Fixture - Seal Change, Main Landing Gear | 5 | |
| C32045-63 | HOLDING FIXTURE - SEAL CHANGE, MAIN LANDING GEAR | 4 | |
| C32046-1 | Holding Fixture Equipment - Shimmy Damper Assembly, Main Landing Gear | 10 | |
| C32046-2 | Holding Fixture Assembly | 1 | |
| C32046-25 | HOLDING FIXTURE EQUIPMENT - SHIMMY DAMPER ASSEMBLY, MAIN LANDING GEAR | 3 | |
| C32046-26 | Holding fixture kit | 1 | |
| C32046-27 | Holding fixture assy | 1 | |
| C32046-35 | HOLDING FIXTURE | 1 | |
| C32063-1 | HOLDING FIXTURE - SEAL CHANGE, MAIN LANDING GEAR | 1 | |
| C47784 | HOLDING FRENCH | 1 | |
| C47941 | HOLDING BLOCK | 1 | |
| C47949 | HOLDING BLOCK | 1 | |
| C47950 | HOLDING WRENCH | 1 | |
| C52001-1 | Holding Fixture - Compressed Spring Cartridge | 4 | |
| C52001-2 | Holding fixture assy | 1 | |
| C52004 | HOLDING FIXTURE - COMPRESSED SPRING CARTRIDGE | 1 | |
| C52004-1 | HOLDING FIXTURE - COMPRESSED SPRING CARTRIDGE | 11 | |
| C57006-1 | Holding Fixture - Winglet | 7 | |
| C632G3102101 | HOLDING TOOL FOR FAN FLANGE | 1 | |
| C632G3102102 | HOLDING TOOL FOR FAN FLANGE | 1 | |
| C632G3102103 | HOLDING TOOL FOR FAN FLANGE | 1 | |
| CAT5663-13 | HOLDING FIXTURE | 1 | |
| CE4-1280 | RING HOLDING LPT | 1 | |
| CG9551001-0001 | TOOL HSTAB HOLDING | 1 | |
| CH1056-257 | HOLDING TOOL | 1 | |
| CH1346-0025 | HOLDING PLATE | 1 | |
| CH1542-0073 | Holding Tool | 1 | |
| CH1542-0073PM | HOLDING TOOL | 1 | |
| CH1878-0588 | HOLDING ROD | 1 | |
| CH705-666 | HOLDING PLATE | 1 | |
| CH705-697 | HOLDING PLATE | 1 | |
| CH712-212 | HOLDING TOOL | 1 | |
| CHA1056-257 | HOLDING TOOL | 1 | |
| CHA1057-064-1 | HOLDING FIXTURE | 1 | |
| CHA1062-079 | HOLDING PLATE | 1 | |
| CHA141031 | SPANNER-HOLDING TOOL | 3 | |
| CHA1540-0252 | Holding Fixture | 1 | |
| CHA1542-0055 | Holding Tool | 1 | |
| CHA1542-0055PM | HOLDING FIXTURE(3IT) | 1 | |
| CHA1542-0181 | Holding Fixture | 1 | |
| CHA1542-0181PM | HOLDING FIXTURE | 1 | |
| CHA1544-0209-F | HOLDING FIXTURE | 1 | |
| CHA1716-0140 | PISTON ROD HOLDING TOOL | 1 | |
| CHA1716-0295 | HOLDING PIECE | 1 | |
| CHA1878-0750 | Solenoid Holding Tool | 1 | |
| CHA1878-0750PM | SOLENOID HOLDING TOOL | 1 | |
| CHA1898-0058 | HOLDING FIXTURE | 1 | |
| CHA1898-0071 | HOLDING ADAPTOR | 1 | |
| CHA696-254 | HOLDING PLATE | 1 | |
| CHA705-1101 | HOLDING PLATE | 1 | |
| CHA705-659 | HOLDING FIXTURE | 1 | |
| CHA711-129 | HOLDING TOOL | 1 | |
| CHA711-140 | HOLDING FIXTURE | 1 | |
| CHA712-212 | HOLDING TOOL | 1 | |
| CHA713-217 | HOLDING TOOL | 1 | |
| CHA717-084 | HOLDING FIXTURE | 1 | |
| CHA717-222 | HOLDING TOOL | 1 | |
| CHA717-255 | HOLDING FIXTURE | 1 | |
| CHA723-1073 | HOLDING FIXTURE | 1 | |
| CHA740-125 | HOLDING BLOCK | 1 | |
| CJ13210 | HOUSING HOLDING BAR | 1 | |
| CJMD327-100 | GEARBOX HOLDING FIXTURE | 2 | |
| CJMDS27-005 | TOOL - HOLDING | 1 | |
| CJMDS32-002 | FIXTURE -OLEO HOLDING | 1 | |
| CPWA-30086 | Holding Plate | 1 | |
| CPWA-30420 | Fixture – Holding | 1 | |
| CPWA-30482 | Fixture – Holding, Accessories Gear Box Coupling S | 1 | |
| CT30904 | HOLDING FIXTURE | 1 | |
| CTB3187 | BATTERY ASSEMBLY , IDS HOLDINGS (SNAP ON) | 1 | |
| D21852-1000 | HOLDING BLOCK TO CHECK THE RADIAL DISTORTION OF THE HALF-WHEELS | 5 | |
| D2727025120000 | HOLDING FIXTURE | 1 | |
| D46028 | TOOL FOR HOLDING STOP (2 IT) | 1 | |
| D46302 | HOLDING TOOL | 1 | |
| D46478 | HOLDING WRENCH | 2 | |
| D46491 | HOLDING TOOL | 2 | |
| D46583 | HOLDING TOOL | 1 | |
| D4697 | DUMMY SPINDLE FOR HOLDING SPACER | 1 | |
| D46970 | DUMMY SPINDLE FOR HOLDING SPACER | 3 | |
| D90ST2001-000-HF | HOLDING FIXTURE | 1 | |
| DAC20 | AIR CONDITIONER GROUND SERVICE (TRILECTRON INDUSTRIES, INC. (DIV. GSE HOLDINGS INC)) | 1 | |
| DAC30 | AIR CONDITIONER GROUND SERVICE (TRILECTRON INDUSTRIES, INC. (DIV. GSE HOLDINGS INC)) | 1 | |
| DAH 601515 | Holding Blocks | 1 | |
| DAH 601760 | Holding Blocks | 1 | |
| DAH 601761 | Holding Blocks | 1 | |
| DAH 602540 | Holding Block | 1 | |
| DAH 602541 | Holding Fork | 1 | |
| DAH600341 | HOLDING SPADE | 1 | |
| DAH600515 | HOLDING BLOCK | 1 | |
| DAH600517 | HOLDING FIXTURE | 1 | |
| DAH600520 | HOLDING BLOCK | 1 | |
| DAH601515 | HOLDING BLOCK | 1 | |
| DAH601760 | BLOCK,HOLDING | 1 | |
| DAH601761 | BLOCK,HOLDING | 1 | |
| DAH601794 | BLOCKS,HOLDING | 1 | |
| DAH601979 | FIXTURE-SETTING AND HOLDING | 1 | |
| DAH602255 | FIXTURE-HOLDING | 1 | |
| DAH602256 | FIXTURE-HOLDING | 1 | |
| DAH602337 | FIXTURE-HOLDING | 1 | |
| DAH602339 | FIXTURE-HOLDING | 1 | |
| DAH602540 | HOLDING BLOCK | 1 | |
| DAH602541 | HOLDING FORK | 1 | |
| DAH602682 | HOLDING FIXTURE | 1 | |
| DAH603061 | FORK-HOLDING | 1 | |
| DAH603062 | BLOCK-HOLDING | 1 | |
| DAH603963 | DAH603963 HOLDING BLOCKS | 1 | |
| DBS-CG1-F | Holding Fixture for DBS-CG1 | 1 | |
| DBWRENCHINSERT | LUB PUMP INSERT HOLDING | 1 | |
| DRT20167 | HOLDING FIXTURE | 1 | |
| DRT35000-100 | BLOCKS,HOLDING | 1 | |
| DRT67093 | HOLDING TOOL | 2 | |
| DRT67093SER055 | ADAPTOR HOLDING TOOL | 1 | |
| DRT67269 | HOLDING POT | 1 | |
| DRT67352 | HOLDING BRACKET | 1 | |
| DRT68009 | HOLDING FIXTURE | 5 | |
| DRT68010 | Holding Fixture | 3 | |
| DRT68019 | Holding fixture | 3 | |
| DRT68023 | Holding Fixture | 1 | |
| DRT68342 | ADAPTOR, HOLDING | 1 | |
| DRT68385 | HOLDING FIXTURE | 3 | |
| DST100-32 | HOLDING BLOCKS | 1 | |
| DST100−32 | Holding Blocks | 1 | |
| E00332 | HOLDING FIXTURE FIRST STAGE ASSEMBLY | 1 | |
| E51767-1 | HOLDING FIXTURE | 1 | |
| EC-D66500-A | HOLDING TOOL | 1 | |
| Ex-74971 | Fixture, holding, compressor vane assy | 1 | |
| Ex-74972 | Fixture, holding, compressor vane assy | 1 | |
| Ex-92646 | Fixture-holding, rear carrier | 1 | |
| Ex-92647 | Fixture-holding, nose bearing plate | 1 | |
| Ex-97184 | Fixture-holding, nose bearing plate | 1 | |
| Ex-98304 | Fixture-holding, diffuser scroll | 1 | |
| F-6404 | HOLDING FIXTURE | 1 | |
| F-6411 | HOLDING FIXTURE | 1 | |
| F-6412 | HOLDING FIXTURE | 1 | |
| F-6416 | HOLDING FIXTURE | 1 | |
| F-6893 | FIXTURE HOLDING | 1 | |
| F-6893 PM | FIXTURE HOLDING | 1 | |
| F1000884 | HOLDING FIXTURE FOR HOUSING SUBASSEMBLY | 1 | |
| F1406705 | NYLON WIRE HOLDING TOOL | 3 | |
| F21891 | HOLDING TOOL | 1 | |
| F26504000 | HOLDING TOOL | 1 | |
| F27333000 | TOOL-HOLDING | 1 | |
| F2MA955307 | HORIZONTAL HOLDING TOOL | 1 | |
| F3368 | HOLDING FIXTURE | 1 | |
| F50B955307 | HORIZONTAL STABILIZER HOLDING TOOL | 1 | |
| F52-0-599 | HOLDING FIXTURE | 1 | |
| F59-0-50020 | Holding Fixture | 1 | |
| F59-0-50021 | HOLDING PLATE | 1 | |
| F59-0-50022 | Holding Fixture | 1 | |
| F618S52 | MLG STRUT CAP ASSY HOLDING TOOL. | 1 | |
| F70220-1 | HOLDING FIXT | 1 | |
| F70320-1 | Holding Fixture - Control Column | 10 | |
| F70320-1-M | HOLDING FIXTURE-CONTROL COLUMN | 1 | |
| F70320-15 | SHAFT - HOLDING FIXTURE, CONTROL COLUMN (SHAFT F70320-15 IS PART OF BASE F70320-2 INCLUDED KIT F70320-1) | 1 | |
| F70320-2 | HOLDING FIXTURE | 1 | |
| F72804 | HOLDING FIXTURE -0 FLAP TRANSMISSION USED TO | 1 | |
| F72966 | HOLDING TOOL -0 DOOR CABLE, NG WHEEL WELL | 1 | |
| F72966-1 | HOLDING TOOL | 3 | |
| F72999-12 | Pin, Holding | 1 | |
| F7XC205559004 | HORIZONTAL STABILIZER HOLDING TOOL | 1 | |
| F80-0-1318 | HOLDING FIXTURE | 1 | |
| F80-0-2604 | Holding Fixture | 1 | |
| F80-0-2614 | Holding Fixture | 1 | |
| F80-0-2774 | Holding Fixture | 1 | |
| F80-0-2791 | Holding Fixture | 1 | |
| F80-0-2791PM | HOLDING FIXTURE | 1 | |
| F80-0-2792 | Holding Fixture-Piston,L.E.Slat Actuator | 1 | |
| F80-0-2792PM | HOLDING FIXTURE-PISTON,L.E.SLAT ACTUATOR | 1 | |
| F80-0-2847 | Holding Fixture | 1 | |
| F80-0-2847PM | HOLDING FIXTURE | 1 | |
| F80-0-2994 | Holding Fixture | 1 | |
| F80-0-3116 | HOLDING FIXTURE | 1 | |
| F80-0-3118 | HOLDING FIXTURE | 1 | |
| F80-0-3261 | HOLDING FIXTURE | 1 | |
| F80-0-4162 | Holding Fixture | 1 | |
| F80-0-4231TK | Holding Fixture | 1 | |
| F80-0-4889 | Assembly Holding Fixture | 14 | |
| F80-0-50260 | HOLDING FIXTURE | 1 | |
| F80-0-50577 | HOLDING FIXTUTE | 1 | |
| F80-0-50871 | SHAFT HOLDING WRENCH | 1 | |
| F80-0-50918 | HOLDING FIXTURE | 1 | |
| F80-0-50941 | Holding Fixture | 1 | |
| F80-0-50970 | HOLDING TOOL | 1 | |
| F80-0-51181 | HOLDING FIXTURE | 1 | |
| F80-0-512 | HOLDING FIXTURE | 1 | |
| F80-0-51225 | HOLDING FIXTURE | 1 | |
| F80-0-56050 | HOLDING FIXTURE | 1 | |
| F80-0-56237 | Test, Holding Fixture Rotating (6IT) | 1 | |
| F80-0-5786 | Holding Fixture | 1 | |
| F80-0-5955 | POW-R-ARM HOLDING FIXTURE | 1 | |
| F80088-1 | HOLDING FIXTURE NOSE GEAR UPPER ORIFICE SUPPORT TU | 1 | |
| F80088-1 -3 | Holding Fixture -Upper Orifice Support Tube. Nose Gear | 1 | |
| F80088-3 | HOLDING FIXTURE | 2 | |
| F80094-4 | HOLDING FIXTURE ASSY | 1 | |
| F80096-1 | HOLDING FIXTURE FWD TRUNNION | 2 | |
| F80096-1 -4 -7 | Holding Fixture -Forward Trunnion Bearing Housing. Main Gear | 1 | |
| F80096-4 | HOLDING FIXTURE- FWD TRUNNION | 10 | |
| F80096-4-M | HOLDING FIXTURE | 1 | |
| F80096-7 | HOLDING FIXTURE ASSY | 6 | |
| F80189-1 | HOLDING FIXTURE - BRAKE VALVE | 1 | |
| F80189-1A | HOLDING FIXTURE, BRA | 1 | |
| F80189-1B | HOLDING FIXTURE BRAK | 1 | |
| F80263-1 | HOLDING FIXTURE | 4 | |
| FBS-30134 | Holding Fixture | 1 | |
| FBS-39920 | Assembly Holding Fixture | 1 | |
| FBS30134 | HOLDING FIXTURE | 1 | |
| FBS32473 | ASSEMBLY HOLDING FIXTURE | 1 | |
| FCS51386 | HOLDING FIXTURE | 1 | |
| FCS51590 | HOLDING FIXTURE | 1 | |
| FDS-10708 | FIXTURE, ASSEMBLY, HOLDING | 1 | |
| FDS-11233 | Holding Fixture | 1 | |
| FDS-14406 | Assy Holding Fixture | 1 | |
| FDS-18078 | Holding Fixture | 1 | |
| FDS-18564 | Assy Holding Fixture | 1 | |
| FDS-2636 | Assy Holding Fixture | 1 | |
| FDS-32136 | Assembly Holding Fixture | 1 | |
| FDS-32140 | FIXTURE, ASSEMBLY, HOLDING | 2 | |
| FDS-32473 | Assembly Holding Fixture | 1 | |
| FDS-33295 | ASSEMBLY HOLDING FIXTURE | 1 | |
| FDS-33570 | Holding Fixture | 1 | |
| FDS-34160 | Holding Fixture | 1 | |
| FDS-34302 | FIXTURE, ASSEMBLY, HOLDING | 2 | |
| FDS-34332 | FIXTURE, ASSEMBLY, HOLDING | 1 | |
| FDS-34355 | Holding Fixture | 1 | |
| FDS-34702 | FIXTURE, ASSEMBLY, HOLDING | 2 | |
| FDS-34861 | Holding Fixture | 1 | |
| FDS-35889 | Assembly Holding Fixture | 1 | |
| FDS-36315 | Assembly Holding Fixture | 1 | |
| FDS-36638 | FIXTURE, ASSEMBLY, HOLDING | 2 | |
| FDS-39022 | Holding Fixture | 1 | |
| FDS-39914 | Assembly Holding Fixture | 1 | |
| FDS-40115 | Holding Fixture | 1 | |
| FDS-40275 | Holding Fixture | 1 | |
| FDS-43463 | Holding Fixture | 1 | |
| FDS-43925 | Assembly Holding Fixture | 1 | |
| FDS-6224 | Holding Fixture | 1 | |
| FDS14406 | ASSY HOLDING FIXTURE | 1 | |
| FDS18078 | HOLDING FIXTURE | 1 | |
| FDS18564 | ASSY HOLDING FIXTURE | 1 | |
| FDS2636 | ASSY HOLDING FIXTURE | 1 | |
| FDS32473 | ASSEMBLY HOLDING FIXTURE | 1 | |
| FDS33570 | HOLDING FIXTURE | 1 | |
| FDS33651 | FIXTURE HOLDING FOR RAM AIR TURBINE 730816 | 1 | |
| FDS33917 | HOLDING FIXTURE | 1 | |
| FDS34302 | ASSEMBLY HOLDING FIXTURE | 2 | |
| FDS34469 | HOLDING FIXTURE | 1 | |
| FDS34702 | ASSEMBLY HOLDING FIXTURE | 2 | |
| FDS34744 | HOLDING FIXTURE | 1 | |
| FDS34802 | FIXTURE HOLDING FOR RAM AIR TURBINE 730816 | 1 | |
| FDS34974 | HOLDING FIXTURE | 1 | |
| FDS35288 | FIXTURE HOLDING FOR EJECTION JACK AY 730820 | 1 | |
| FDS35292 | FIXTURE HOLDING FOR EJECTION JACK AY 730820 | 1 | |
| FDS35778 | ASSEMBLY HOLDING.FIXTURE | 1 | |
| FDS35805 | FIXTURE AY HOLDING FOR 730816 RAM AIR TURBN | 1 | |
| FDS35822 | ASSEMBLY HOLDING FIXTURE DELETED | 1 | |
| FDS35889 | ASSEMBLY HOLDING FIXTURE | 1 | |
| FDS36571 | HOLDING FIXTURE | 1 | |
| FDS36572 | HOLDING FIXTURE | 1 | |
| FDS36638 | HOLDING FIXTURE | 2 | |
| FDS37455 | ASSEMBLY HOLDING FIXTURE | 1 | |
| FDS37459 | ASSEMBLY HOLDING FIXTURE | 1 | |
| FDS38732 | ASSEMBLY HOLDING FIXTURE | 1 | |
| FDS400-223 | ASSEMBLY HOLDING FIXTURE | 2 | |
| FDS45732 | HOLDING FIXTURE | 1 | |
| FDS6224 | HOLDING FIXTURE | 1 | |
| FGFD929501 | HOLDING VALVE | 1 | |
| FI000884 | HOLDING FIXTURE FOR HOUSING SUBASSEMBLY | 1 | |
| FME-65-73761 | HOLDING FIXTURE | 5 | |
| FME65-73761 | HOLDING FIXTURE -0 MAIN LANDING GEAR | 5 | |
| FME65-73761-1 | HOLDING FIXTURE -0 MLG | 1 | |
| FME65B00161-1 | WRENCH SET- HOLDING | 1 | |
| FS0-0-50495 | Holding Fixture | 1 | |
| FXT-03000 | RELIEF VALVE HOLDING FIXTURE | 1 | |
| FXT-03663 | HOLDING FIXTURE (5IT) | 1 | |
| FXT-04335 | HOLDING COMPRESSION FIXTURE | 1 | |
| FXT-05508 | HOLDING FIXTURE | 1 | |
| FXT-07817 | IGV Holding Fixture | 1 | |
| FXT-09640 | Holding fixture, impeller | 1 | |
| FXT-09694 | BEARING HOLDING FIXTURE | 1 | |
| FXT-10514-P01 | HOLDING FIXTURE | 1 | |
| FXT-10514-P02 | HOLDING FIXTURE | 1 | |
| FXT-10514-P03 | HOLDING FIXTURE | 1 | |
| FXT-10605 | ROTOR HOLDING FIXTURE | 1 | |
| FXT-10771 | Holding fixture | 1 | |
| FXT-10773 | HOLDING FIXTURE | 1 | |
| FXT-14374 | INSTALLATION TOOL HOLDING FIXTURE | 1 | |
| FXT-14931 | HOLDING FIXTURE, IMPELLER | 1 | |
| FXT-17903 | HOLDING FIXTURE | 1 | |
| FXT05508 | HOLDING FIXTURE | 1 | |
| FXT06280 | HOLDING FIXTURE | 1 | |
| FXT07817 | IGV HOLDING FIXTURE | 1 | |
| FXT09694 | BEARING HOLDING FIXTURE | 1 | |
| G106-00-0660 | HOLDING FIXTURE | 1 | |
| G25002-1 | CABLE TEN. HOLDING T | 1 | |
| G27048-1 | INBOARD ELEVATOR ACTUATOR HOLDING TOOL | 8 | |
| G32032 | HOLDING EQPT -0 INNER CYLINDER AND METERING ROD, | 1 | |
| G32032-1 | HOLDING EQUIPMENT - INNER CYLINDER AND METERING ROD, WING LANDING GEAR | 4 | |
| G32080-1 | BRACKET HOLDING ASSEMBLY AND WRENCH KIT, MACHINED BRACKET, WLG | 1 | |
| G600-200028-1 | TOOL, UNIVERSAL RECORDER HOLDING FIXTURE | 1 | |
| G600−200028−1 | Universal − Recorder Holding Fixture | 1 | |
| G601-280013-1 | HOLDING FIXTURE FOR AFT FUEL TANK. | 1 | |
| G601R274202-1 | HSTA HOLDING TOOL | 8 | |
| G601R792101-1 | WRENCH - LUBE PUMP INSERT HOLDING | 6 | |
| G601R792101-1-AN | INSERT HOLDING WRENCH | 1 | |
| G601R792101−1 | Wrench − Lube Pump Insert Holding | 6 | |
| GA3538 | PROTO FLEXIBLE RETREAVING / HOLDING TOOLS | 1 | |
| GA47521 | HOLDING TOOL USED TO LOCK THE LOCK LINK FOR STORAGE | 1 | |
| GA47522 | HOLDING TOOL | 1 | |
| GA47593 | Holding Fixture | 1 | |
| GEA2230G1 | ASSEMBLY HOLDING | 1 | |
| GEA2230G2 | ASSEMBLY HOLDING | 1 | |
| GEA2230G3 | ASSEMBLY HOLDING | 1 | |
| GEA2230G4 | ASSEMBLY HOLDING | 1 | |
| GS10456-1 | FIXTURE - HOLDING MOTOR | 1 | |
| GS10608-1 | THROTTLE VALVE CAP HOLDING FIXTURE | 1 | |
| GS10724 | FIXTURE, HOLDING | 1 | |
| GS10756 | FIXTURE HOLDING | 1 | |
| GS11397 | FIXTURE BLADE HOLDING | 1 | |
| GS11445 | FIXTURE HOLDING | 1 | |
| GS11446 | FIXTURE HOLDING | 1 | |
| GS11447 | FIXTURE HOLDING LM SEN | 1 | |
| GS12534 | FIXTURE, HOLDING | 1 | |
| GS12562 | FIXTURE, HOLDING | 1 | |
| GS12697 | SPACER BLADE HOLDING F | 1 | |
| GS12699 | ARBOR BLADE HOLDING FI | 1 | |
| GS12699-1 | ARBOR BLADE HOLDING | 1 | |
| GS13106 | FIXTURE PISTON HOLDING | 1 | |
| GS13159-1 | FIXTURE, HOLDING | 1 | |
| GS13165-1 | FIXTURE, ROTATIVE ASSY HOLDING | 2 | |
| GS13361-1 | CLAMP, HOLDING | 1 | |
| GS13408-1 | TV HOLDING FIXTURE | 1 | |
| GS13518 | FIXTURE HOLDING | 1 | |
| GS13566-1 | FIXTURE HOLDING | 1 | |
| GS13909-1 | SCREW SET, HOLDING BLOCK | 1 | |
| GS13932 | FIXTURE HOLDING | 1 | |
| GS13932-1 | HOLDING FIXTURE | 1 | |
| GS14062-1 | FIXTURE, HOLDING | 1 | |
| GS14674-1 | HOLDING FIXTURE ELBOW | 1 | |
| GS14706-1 | HOLDING FIXTURESUPPORT, ROTOR SLEEVE | 2 | |
| GS14799-1 | HOLDING TOOL | 1 | |
| GS14855-1 | HOLDING FIXTURE | 1 | |
| GS15029-1 | FIXTURE, HOLDING | 1 | |
| GS15531-1 | FIXTURE, HOLDING | 1 | |
| GS15664-3 | FIXTURE, HOLDING | 1 | |
| GS15664-4 | FIXTURE, HOLDING | 1 | |
| GS15771-1 | HOLDING FIXTURE | 1 | |
| GS16022-1 | FIXTURE, HOLDING FL YBALL GOVERNOR | 1 | |
| GS19540-1 | FIXTURE, VALVE HOLDING | 1 | |
| GS20046-1 | FIXTURE, HOLDING | 2 | |
| GS20346-1 | HOLDING FIXTURE | 2 | |
| GS20649-1 | FIXTURE, HOLDING | 1 | |
| GS21742-1 | FIXTURE, HOLDING | 1 | |
| GS22024-1 | HOLDING FIXTURE | 1 | |
| GS22234-1 | FIXTURE, VALVE HOLDING | 1 | |
| GS22330-1 | COMP END HOLDING FIXTURE | 2 | |
| GS22331-1 | FAN END HOLDING FIXTURE | 2 | |
| GS22358-1 | HOLDING FIXTURE | 1 | |
| GS22645-1 | FIXTURE, HOLDING | 1 | |
| GS22646-1 | FIXTURE, HOLDING | 1 | |
| GS22817-1 | HOLDING FIXTURE | 1 | |
| GS22826-1 | FIXTURE, DIFFUSER HOLDING | 1 | |
| GS22827-1 | FIXTURE, HOLDING | 1 | |
| GS22849-1 | FIXTURE, HOLDING | 2 | |
| GS22926-1 | HOLDING FIXTURE | 1 | |
| GS22928-1 | HOLDING FIXTURE | 1 | |
| GS23304-1 | FIXTURE, HOLDING | 1 | |
| GS23598 | Holding Fixture | 1 | |
| GS23610-1 | HOLDING FIXTURE | 1 | |
| GS23992-1 | HOLDING FIXTURE | 1 | |
| GS24004-1 | HOLDING FIXTURE | 1 | |
| GS24091-1 | HOLDING FIXTURE, PRESSURE TEST | 1 | |
| GS24189-1 | HOLDING FIXTURE | 1 | |
| GS47128 | NLG DRAG BRACE HOLDING TOOL | 1 | |
| GSB6110006 | STAND HOLDING PROP | 2 | |
| GSE809- 212A4002-HF | HOLDING FIXTURE AFT PNEUMATIC SOURCE ASSY & TEST | 1 | |
| GU32608 | BLADE HOLDING JIG | 1 | |
| H21984 | HOLDING FIXTURE | 1 | |
| H301ABV201M | WEDGE FOR HOLDING | 1 | |
| H341ADV203M | SPACER FOR HOLDING FAST ERECTION ROD | 1 | |
| H46158 | HOLDING TOOL | 1 | |
| H47110 | HOLDING TOOL | 1 | |
| H47827 | HOLDING TOOL FOR END FITTING | 1 | |
| H60006437 | TOOL - HOLDING | 1 | |
| HA-350-BBHT | Blade Bolt Holding Tool AS350 | 1 | |
| HA-350BBHW | BLADE BOLT HOLDING WORKAID | 1 | |
| HC-31796 | MLG FIXTURE (HOLDING & TESTING) | 1 | |
| HC130H0018-000 | HOLDING- CLIP | 3 | |
| HC130H0098-000 | Tool - holding throttle compensator | 1 | |
| HF1P375A0002-00 | HOLDING FIXTURE | 1 | |
| HF1P375A000200 | HOLDING FIXTURE | 1 | |
| HF1P376A0002-00 | HOLDING FIXTURE | 1 | |
| HF2342 | HOLDING FIXTURE | 1 | |
| HF2348 | HOLDING FIXTURE | 1 | |
| HF2P376A0002-00 | HOLDING FIXTURE | 1 | |
| HF9-217-33 | Holding Fixture | 1 | |
| HHS-32701 | Housing Holding Fixture | 1 | |
| HHS32701 | HOUSING HOLDING FIXTURE | 1 | |
| HS-32701 | HOUSING HOLDING FIXTURE | 1 | |
| HS-7572 | FIXTURE - BLADE HOLDING | 1 | |
| HS-8170 | ARBOR - HOLDING FIXTURE, BLADE | 1 | |
| HS6961 | FIXTURE HOLDING | 1 | |
| HS7461 | FIXTURE HOLDING | 1 | |
| HS7469 | FIXTURE HOLDING | 1 | |
| HS7539 | HOLDING FIXUTRE | 2 | |
| HS7572 | FIXTURE HOLDING | 1 | |
| HS7573 | BLADE HOLDING FIXTURE ARBOR | 1 | |
| HS7635 | RING - BLADE GEAR HOLDING | 1 | |
| HS8007 | FIXTURE - VALVE HOUSING HOLDING | 1 | |
| HS8107 | UPPER BODY HOLDING FIXTURE | 1 | |
| HS8600 | FIXTURE HOLDING | 1 | |
| HS8608 | FIXTURE HOLDING | 1 | |
| HS8609 | CAP HOLDING DIA | 1 | |
| HS8616 | FIXTURE,HOLDING,SEA | 1 | |
| HS8621 | CAP HOLDING DIA | 1 | |
| HS8659 | FIXTURE HOLDING | 1 | |
| HS8661 | FIXTURE HOLDING | 1 | |
| HS8662 | CAP HOLDING VAL | 1 | |
| HS8667 | FIXTURE HOLDING | 1 | |
| HS8683 | FIXTURE HOLDING | 1 | |
| HS8684 | ADAPTER BLADE HOLDING | 1 | |
| HS8782 | FIXTURE HOLDING | 1 | |
| HS8809 | FIXTURE, HOLDING REF RIG PACK | 2 | |
| HS9175 | FIXTURE HOLDING | 1 | |
| HS9176 | FIXTURE HOLDING | 1 | |
| HS9182 | FIXTURE HOLDING | 1 | |
| HS9252 | BODY HOLDING FIXTURE | 1 | |
| HS9363 | FIXTURE HOLDING | 1 | |
| HS9379 | SPACER - BLADE HOLDING | 1 | |
| HS9380 | ARBOR - BLADE HOLDING FIXTURE | 1 | |
| HS9381 | ARBOR - BLADE HOLDING FIXTURE | 1 | |
| HS9487 | WRENCH - HOLDING | 2 | |
| HS9581 | FIXTURE HOLDING | 1 | |
| HS9658 | FIXTURE HOLDING | 1 | |
| HS9704 | FIXTURE - LIMITING LINKAGE HOLDING | 1 | |
| HS9757 | ARBOR - BLADE HOLDING FIXTURE | 1 | |
| HS9807 | FIXTURE AFT HOUSING HOLDING | 1 | |
| HS9808 | Fixture, Holding | 1 | |
| HSP3758 | CAM HOLDING FIXTURE | 1 | |
| HSP3759 | CAM HOLDING FIXTURE | 1 | |
| HUS-32285 | Holding Fixture | 1 | |
| HUS-32285 (AGE14038) | Holding Fixture | 1 | |
| HUS32285 | HOLDING FIXTURE | 1 | |
| HW27065 | Interconnector Holding Tool | 1 | |
| HXC-16157B-7 | Holding base | 1 | |
| Holding Block No.1 | Honeywell Holding Block No.1, 32-49-01 page 4.E.-3. Includes Test Report and Certificate of Conformance. | 1 | |
| Holding Block No.2 | Honeywell Holding Block No.2, 32-49-01 page 4.E.-4. Includes Test Report and Certificate of Conformance. | 1 | |
| IAE1J12081 | CAP, HOLDING | 1 | |
| IAE1J12082 | CAP, HOLDING | 1 | |
| IAE1J12082-13 | CAP, HOLDING | 1 | |
| IAE1J12401 | PLATE, HOLDING | 1 | |
| IAE1J12414 | HOLDING BLOCK | 1 | |
| IAE1J12521 | FIXTURE, HOLDING | 1 | |
| IAE1J12538 | FIXTURE, HOLDING | 1 | |
| IAE1J12538A | FIXTURE, HOLDING | 1 | |
| IAE1J12541 | SUPPORT HOLDING ENGINE ASSY LPC ROTOR INTERMEDIATE | 3 | |
| IAE1J12546 | FIXTURE, HOLDING | 1 | |
| IAE1J12548 | FIXTURE, HOLDING RETAINER | 1 | |
| IAE1J13107 | IAE 1J13107 HOLDING SUPPORT | 1 | |
| IAE1J13210 | IAE 1J13210 LPC HOLDING BLOCK | 1 | |
| IAE1J2538A | FIXTURE, HOLDING | 1 | |
| IAE1P16271 | FIXTURE-HOLDING | 5 | |
| IAE1P16389 | BASE, HOLDING | 1 | |
| IAE1P16563 | PLATE, HOLDING | 1 | |
| IAE1R118220-2 | FIXTURE HOLDING | 1 | |
| IAE1R18220 | FIXTURE, HOLDING | 1 | |
| IAE3R19167 | FIXTURE - HOLDING - FRONT STAGE 9-12 DIS | 1 | |
| IAE3R19168 | FIXTURE - HOLDING - REAR STAGE 9-12 DISC | 1 | |
| IAE3R19200 | FIXTURE - HOLDING - REAR STAGE 9-12 DISC | 1 | |
| IAG-230-01 | HOLDING FIXTURE FOR SHAFT | 1 | |
| IND80960 | SHEATH-HOLDING | 1 | |
| J21841 | HOLDING FIXTURE | 1 | |
| J2345 | FLEXIBLE RETRIEVING AND HOLDING TOOL -23-1/2" | 1 | |
| J25013-12 | HOLDING ANGLE ASSY | 1 | |
| J25013-3 | HOLDING ASSY | 1 | |
| J25013-47 | HOLDING ASSY - HOIST EQUIPMENT, FORWARD OFCR | 2 | |
| J25013-48 | HOLDING ASSY | 1 | |
| J25013-51 | HOLDING ANGLE ASSY | 1 | |
| J27079-42 | Gage holding rod | 1 | |
| J27080-1 | HOLDING FIXTURE - TE FLAP, ANGLE GEARBOX | 1 | |
| J32062-26 | TRANSPORTATION EQUIPMENT - TOWER JACK OR HOLDING FIXTURE, MLG | 7 | |
| J32075-43 | HOLDING FIXTURE ASSEMBLY | 1 | |
| J46006 | HOLDING BLOCKS | 1 | |
| J46011 | HOLDING BLOCKS | 1 | |
| J46044 | HOLDING BLOCK | 1 | |
| J46045 | HOLDING BLOCK | 1 | |
| J46050 | HOLDING PLATE PLUGS | 1 | |
| J46159 | HOLDING BLOCKS | 1 | |
| J47138 | ADAPTOR FOR HOLDING ANTI-SHIMMY VALVE | 2 | |
| J47151 | SLEEVE HOLDING | 1 | |
| J47200 | HOLDING BLOCK | 10 | |
| J47310 | HOLDING TOO | 1 | |
| J47963-1 | HOLDING BLOCK | 1 | |
| K32019-68 | HOLDING PIN ASSY | 1 | |
| K32020-1 | HOLDING FIXTURE | 9 | |
| K32020-29 | HOLDING FIXTURE | 9 | |
| K32040-7 | Holding pin assy | 1 | |
| K55006-73 | HOLDING FIXTURE | 9 | |
| K55006-75 | HOLDING FIXTURE | 9 | |
| K78012-85 | Holding bracket | 3 | |
| KAMR123 | MAGNA RAIL W/HOLDING MAGNET | 1 | |
| LCTC4713 | #1 BRG HOLDING FIXTURE | 1 | |
| LEFT WINGLET | LEFT WINGLET HOLDING FIXTURE | 1 | |
| LHL19533 | SEPARATION NUT HOLDING DEVICE | 1 | |
| LISHP-3 | HOLDING PIN | 1 | |
| LL548A167 | HOLDING PLATE | 1 | |
| LL548A187 | HOLDING SHAFT | 1 | |
| LL548A196 | HOLDING PLATE | 1 | |
| LLA515A059 | HOLDING PLATE | 1 | |
| LLA517A062 | PLATE-HOLDING | 1 | |
| LLA537A129 | ADAPTER-HOLDING | 1 | |
| LLA548A167 | HOLDING PLATE | 1 | |
| LLA548A168 | HOLDING PLATE | 1 | |
| LLA548A196 | HOLDING PLATE | 1 | |
| LLA548A248 | HOLDING TOOL | 1 | |
| LLA548A361 | HOLDING TOOL | 1 | |
| LMT 00061 | SWIRLER HOLDING FIXTURE | 1 | |
| LMT 00064 | SWIRLER HOLDING FIXTURE | 1 | |
| LPF617-4422-001 | HEAD HOLDING FIXTURE | 1 | |
| LTCT 1064 | FIXTURE HOLDING | 1 | |
| LTCT 2075 | HOLDING FIXTURE FOR SUN GEAR | 1 | |
| LTCT 4553 | HOLDING FIXTURE | 2 | |
| LTCT10449 | HOLDING FIXTURE | 1 | |
| LTCT1064 | FIXTURE, HOLDING | 1 | |
| LTCT1064-01 | Fixture Assembly, Holding | 1 | |
| LTCT11060 | Fixture, Holding Power Turbine Blade | 1 | |
| LTCT11486 | Fixture, Holding | 1 | |
| LTCT115 | FIXTURE, HOLDING | 1 | |
| LTCT12969-01 | Fixture, Guide Tube Holding | 1 | |
| LTCT13001 | HOLDING FIXTURE | 1 | |
| LTCT13344-01 | FIXTURE, HOLDING-NUT TO SHAFT | 2 | |
| LTCT13688 | FIXTURE HOLDING NOZ | 1 | |
| LTCT13936-01 | Fixture Assembly, Holding | 1 | |
| LTCT13984-01 | Adapter, Holding, Power Turbine Assembly | 1 | |
| LTCT14530 | AGB CASE HOLDING FIXTURE | 1 | |
| LTCT14540 | Fixture, Holding | 1 | |
| LTCT14575 | Holding Fixture | 1 | |
| LTCT14605 | HOLDING & FIXTURE TOOL | 1 | |
| LTCT14605-01 | Fixture, Holding and Torque | 1 | |
| LTCT14607-01 | Fixture, Holding | 1 | |
| LTCT14611-01 | Fixture, Holding, Bevel Gear and Backlash Gage | 1 | |
| LTCT14616-01 | Fixture, Holding, Fourth Wheel | 1 | |
| LTCT14787-01 | Fixture, Holding | 1 | |
| LTCT14794-01 | Fixture, Holding, Air/Oil Separator Gear Wrench | 1 | |
| LTCT1576 | Fixture, Holding, Disc Assembly | 1 | |
| LTCT1740 | HOLDING TOOL | 1 | |
| LTCT1740-01 | HOLDING TOOL, GEAR | 1 | |
| LTCT2044 | HOLDING DEVICE | 1 | |
| LTCT2048 | COMPRESSOR PINION GEAR HOLDING FIXTURE | 1 | |
| LTCT2075 | FIXTURE HOLDING | 1 | |
| LTCT2149 | FIXTURE, HOLDING | 1 | |
| LTCT3024-B | NOF-FIXTURE HOLDING LTCT | 1 | |
| LTCT3040 | FIXTURE HOLDING | 2 | |
| LTCT30966 | HOLDING FIXTURE | 1 | |
| LTCT3927 | HOLDING TOOL SHAFT | 1 | |
| LTCT4440 | Base, Holding Fixture | 1 | |
| LTCT4441 | Adapter, Holding Fixture | 1 | |
| LTCT4533 | FIXTURE HOLDING | 1 | |
| LTCT4553 | FIXTURE, HOLDING/PULLER | 2 | |
| LTCT4713 | HOLDING FIXTURE | 1 | |
| LTCT4904 | FIXTURE, HOLDING | 1 | |
| LTCT4996 | FIXTURE,HOLDING,GEAR | 1 | |
| LTCT5020X | Fixture, Holding Turbine Rotor Shaft | 1 | |
| LTCT5333 | Wrench, Torquing and Holding | 1 | |
| LTCT5432X | Wrench & Holding Fixture | 1 | |
| LTCT5438 | Fixture, Holding to Torque Nut | 1 | |
| LTCT5440 | Holding Fixture | 1 | |
| LTCT5450 | Holding & Torquing Fixture | 1 | |
| LTCT5451 | Holding & Torquing Fixture | 1 | |
| LTCT5468 | Wrench & Holding Fixture | 1 | |
| LTCT5580 | Holding Fixture | 1 | |
| LTCT5709-01 | Fixture, Holding, Nut and Gear Shaft Wrench | 1 | |
| LTCT5710 | Fixture, Holding | 1 | |
| LTCT5711-01 | Fixture, Holding, Nut and Sleeve Wrench | 1 | |
| LTCT5769 | Assy. Holding Fixture | 1 | |
| LTCT5782-01 | Fixture, Holding, Gear | 1 | |
| LTCT6641 | Holding Fixture (Compressor Rotor) | 1 | |
| LTCT7131x | Wrench & Holding Fixture | 1 | |
| LTCT7157x | Plate, Holding - Torque Fixture | 1 | |
| LTCT7184 | Fixture, Holding | 1 | |
| LTCT7202-01 | FIXTURE, HOLDING NO. 4 AND 5 BEARING OIL TUBE | 1 | |
| LTCT7605-01 | Fixture, Holding, First Stage Turbine Disc | 1 | |
| LTCT7699 | FIXTURE, HOLDING, SUN GEAR AFT | 1 | |
| LTCT7699-01 | Fixture, Holding, Sun Gear Aft | 1 | |
| LTCT7842 | Wrench and Holding Fixture, Nut and Gear Shaft | 1 | |
| LTCT896 | Fixture, Holding, Igniter Plug | 1 | |
| LTCT962 | TIE BOLT HOLDING FIXTURE | 2 | |
| M.DX7061N2-0 | HOLDING FIXTURE TO HOLD THE MANIFOLD ASSEMBLY DURING ASSEMBLY/ DISASSEMBLY | 1 | |
| M21862 | HOLDING BLOCK FOR CHECKING THE RADIAL DISTORTION OF THE HALF-WHEELS | 9 | |
| M46252 | HOLDING WRENCH ACTUATOR ROD | 1 | |
| M46259 | HOLDING WRENCH FOR SEAT | 2 | |
| M46347 | Holding Tool | 2 | |
| M46913 | TOOL HOLDING THE CROWN | 1 | |
| M47036 | HOLDING BLOCK | 1 | |
| M56837A0000-01 | HOLDING FIXTURE | 1 | |
| M57524A0000-01 | HOLDING FIXTURE | 1 | |
| M57574A0000-01 | HOLDING FIXTURE | 1 | |
| M57890A0000-01 | HOLDING FIXTURE | 1 | |
| M58059A0000-01 | HOLDING FIXTURE | 1 | |
| M58115A0000-01 | HOLDING FIXTURE | 1 | |
| M58189A0000-01 | HOLDING FIXTURE | 1 | |
| M58190A0000-01 | HOLDING FIXTURE | 1 | |
| M58191A0000-01 | HOLDING FIXTURE | 1 | |
| M58222A0000-01 | HOLDING FIXTURE | 1 | |
| M58227A0000-01 | HOLDING FIXTURE | 1 | |
| M58436A0000-01 | HOLDING FIXTURE | 1 | |
| M58463A0000-01 | HOLDING FIXTURE | 1 | |
| M58573A0000-01 | HOLDING FIXTURE | 1 | |
| M65724169 | HOLDING TOOL | 1 | |
| M65725090 | HOLDING TOOL | 1 | |
| M65725090A | HOLDING TOOL | 1 | |
| M65725188A | HOLDING TOOL | 1 | |
| M65725354 | HOLDING FIXTURE | 1 | |
| M65725575 | Holding Tool | 2 | |
| M6572582 | HOLDING TOOL | 1 | |
| M65725828 | Holding Tool | 1 | |
| M65725828A | HOLDING TOOL | 1 | |
| M65725828B-1 | HOLDING FUXTURE | 1 | |
| M65725961 | HOLDING TOOL | 1 | |
| M82000122 | HOLDING FIXTURE | 1 | |
| MAS-C | CARGO PANEL & FLOOR BOARD HOLDING TROLLEY | 1 | |
| MAS-W | WINDOW TRIM HOLDING TROLLEY V SHAPE | 1 | |
| MBBDGH100 | DEVICE HOLDING | 1 | |
| MBEU56286 | HPRU HOLDING FIXTURE | 1 | |
| MBEU57657 | HPRU ACCELERATION TEST RIG HOLDING | 1 | |
| MBEU57834 | HOLDING FIXTURE-FIRING UNITS | 1 | |
| ME204-20129T1 | HOLDING SURV ANTENNA | 1 | |
| MGC231-26 | HOLDING DEVICE | 1 | |
| MH16190 | Holding Metal Clamps | 1 | |
| MHS33654 | FIXTURE,HOLDING- FOR RAM AIR TURBINE 730816 | 1 | |
| MIT-1544100-14 | HOLDING TOOL (PART OF MIT-1544100) | 1 | |
| MIT1026-63 PM | BLOCK-HOLDING | 1 | |
| MIT65-20846T1 | HHOLDING FIXTURE | 1 | |
| MIT65B18211 | HOLDING TOOL - UPPER SHOCK STRUT BULKHEAD FITTING, WING LANDING GEAR | 1 | |
| MKTM68 | HOLDING FIXTURE (HOFX) | 1 | |
| MMT092100203 | HOLDING WRENCH | 1 | |
| MROFMHF608C0100535 | HI STAND ASSEMBLY HOLDING TOOL, LH | 1 | |
| MROFMHF608C0100536 | HI STAND ASSEMBLY HOLDING TOOL, RH | 1 | |
| MT0001-D22640000 | HOLDING TOOL | 1 | |
| MT091-1 | Holding Tool | 3 | |
| MT1026 | HOLDING BLOCKS | 1 | |
| MT1026-104 | HOLDING BLOCKS | 1 | |
| MT1026-130 | MT1026/130 HOLDING BLOCKS | 1 | |
| MT1026-130PM | MT1026/130 HOLDING BLOCKS | 1 | |
| MT1026-63 | BLOCK-HOLDING | 2 | |
| MT1026/107 | HOLDING BLOCKS | 1 | |
| MT1026/130 | Holding Blocks | 1 | |
| MT1026/63 | Holding Blocks | 2 | |
| MT1026/82 | BLOCKS HOLDING | 1 | |
| MT102682 | BLOCKS HOLDING | 1 | |
| NA1080-05 | HOLDING FIXTURE (3IT) | 1 | |
| NOV-65 | ROTOR HOLDING TOOL | 1 | |
| NPN-002 | HOLDING PANEL STAND-01 | 1 | |
| NSA935401-03 | HOLDING CLAMP | 2 | |
| OS22934 | Tool, Holding | 1 | |
| OS22964C | Holding Tool | 1 | |
| OS22964C ( NP ) or OS22964D | HOLDING TOOL | 1 | |
| OS22964D | Holding Tool | 1 | |
| OTC6024 | CRANKSHAFT HOLDING TOOL | 1 | |
| OU129524 | Holding Fixture | 1 | |
| OU144768 | HOLDING WRENCH-AILERON SERVOCONTROL ADJUSTMENT | 11 | |
| OU144928 | Holding Tool | 1 | |
| OU144972 | Holding Fixture | 1 | |
| OU145094 | HOLDING WRENCH-AILERON | 1 | |
| OU145399 | HOLDING FIXTURE | 1 | |
| OU145407 | HOLDING FIXTURE | 1 | |
| OU145410 | TOOL-GEAR BOX HOLDING | 1 | |
| OU145410 | GEAR BOX HOLDING TOOL | 1 | |
| OU190822 | THSA HOLDING FIXTURE | 1 | |
| P535A0028-00 | HOLDING FIXTURE | 1 | |
| P547A0039-00 | HOLDING FIXTURE (2 ITEMS) | 1 | |
| PD2660 | ADAPTER HOLDING | 1 | |
| PF11167 | HOLDING FIX. | 1 | |
| PNE-UNIVERSAL | UNIVERSAL HOLDING ADAPTER | 1 | |
| PNEUMATIC HOLDING FIXTURE 2 | PNEUMATIC HOLDING FIXTURE | 1 | |
| PR46000-2 | BASE FOR HOLDING DUMMY SPINDLE | 3 | |
| PRHI01-D22640000.81 | HOLDING FIXTURE | 1 | |
| PWA 105350 | Collar Holding | 5 | |
| PWA 25205 | HOLDING FIXTURE | 1 | |
| PWA 25313 | BASE MGB DEAERATOR GSHT HOLDING | 2 | |
| PWA 25915 | HOLDING FIXTURE WITH GAGE | 2 | |
| PWA 25992 | HOLDING FIXTURE | 1 | |
| PWA 27188 | HOLDING FIXTURE | 1 | |
| PWA 27189B | HOLDING FIXTURE | 1 | |
| PWA 28678 | BLADE HOLDING FIXTURE WITH GAGE | 2 | |
| PWA 291213 | HOLDING FIXTURE WITH INDICATOR | 1 | |
| PWA 29560D | HOLDING FIXTURE | 1 | |
| PWA 29792 | HOLDING TOOL | 1 | |
| PWA 32148 | HOLDING FIXTURE | 1 | |
| PWA 32293 | HOLDING FIXTURE | 1 | |
| PWA 7153 | FIXTURE OIL SCREEN HOLDING | 1 | |
| PWA 75197 | BLADE HOLDING FIXTURE | 1 | |
| PWA 85264 | "ADAPTER, HOLDING* (USE WITH MECHANICAL AND HYDRAULIC WRENCH) | 1 | |
| PWA 85301 | "ADAPTER, HOLDING (USE WITH MECHANICAL WRENCH) | 1 | |
| PWA 85507 | ADAPTER, HOLDING (USE WITH HYDRAULIC WRENCH) | 1 | |
| PWA 85515 | ADAPTER, HOLDING* (USE WITH HYDRAULIC WRENCH) | 1 | |
| PWA 85517 | ADAPTER, HOLDING* (USE WITH HYDRAULIC WRENCH) | 1 | |
| PWA 85791 | HOLDING FIXTURE FOR BRG 1 | 1 | |
| PWA 86603 | ADAPTER, HOLDING | 2 | |
| PWA 88136 | HOLDING ADAPTER | 1 | |
| PWA 88709 | PLUG, HOLDING | 1 | |
| PWA101181 | ADAPTER HOLDING-MAIN GEARBOX | 1 | |
| PWA105350 | COLLAR, HOLDING | 5 | |
| PWA21500 | ADAPTER, HOLDING | 1 | |
| PWA22747 | HOLDING TOOL RIVET | 1 | |
| PWA25279 | BASE - MGB OUT HYD G/SFT HOLDING_[PWA25279] | 2 | |
| PWA25287 | BASE - MGB F/P G/SFT HOLDING_[PWA25287] | 2 | |
| PWA25313 | BASE - MGB DEAERATOR G/SFT HOLDING_[PWA25313] | 2 | |
| PWA25336 | BASE - MGB SCAV DRIVE SPUR GEAR HOLDING_[PWA25336] | 2 | |
| PWA25340 | BASE - MGB REAR SCAV G/SFT HOLDING_[PWA25340] | 2 | |
| PWA25443 | FIXTURE-#1 BRG HOUSING HOLDING_[PWA25443] | 2 | |
| PWA26140 | FIXTURE HOLDING 3.0 BLEED VALVE FERRY SHIPPING | 1 | |
| PWA26394 | BASE - MGB O/P G/SFT HOLDING_[PWA26394] | 2 | |
| PWA27920 | CLAMP, HOLDING - FUEL MANIF JUMPER TUBE_[PWA27920] | 1 | |
| PWA28264 | FIXTURE, HOLDING - 1ST STG TURB VANE_[PWA28264] | 1 | |
| PWA28403 | PRATT & WHITTNEY 1ST STAGE FAN BLADE CALIBRATION STANDARD WITH HOLDING BLOCK . Includes Test Report and Certificate of Conformance. | 4 | |
| PWA72562 | HOLDING FIXTURE | 1 | |
| PWA72563 | HOLDING FIXTURE | 1 | |
| PWA76255-9 | ADAPTER HOLDING | 1 | |
| PWA76289 | ADAPTER HOLDING | 1 | |
| PWA76290 | ADAPTER HOLDING | 1 | |
| PWA76301 | ADAPTER HOLDING | 1 | |
| PWA77506 | Holding Adapter | 1 | |
| PWA80608 | NUT HOLDING | 1 | |
| PWA81311 | FIXTURE HOLDING | 1 | |
| PWA85063 | PLUG SET HOLDING HPC | 1 | |
| PWA85064 | PLUG SET HOLDING HPC | 1 | |
| PWA85108-8 | PLUG HOLDING ENG. ASSY. | 1 | |
| PWA85108-C | PLUG HOLDING ENG. ASSY. | 1 | |
| PWA85110 | PLUG HOLDING ENG. ASSY. | 1 | |
| PWA85111 | PLUG HOLDING ENG. ASSY. | 1 | |
| PWA85231 | PLUG SET HOLDING LPT | 1 | |
| PWA85310 | ADAPTER HOLDING | 1 | |
| PWA85554 | HOLDING PLATE | 1 | |
| PWA86137 | BRACKET-HOLDING ENG | 1 | |
| PWA86603 | ADAPTER-HOLDING PMA RETAINING NUT | 2 | |
| PWA86603A | ADAPTER, HOLDING | 1 | |
| PWA87215 | PLUG HOLDING | 1 | |
| PWC 34913 | HOLDING FIXTURE | 14 | |
| PWC 37388 | HOLDING FIXTURE | 2 | |
| PWC 37540 | HOLDING ADAPTER | 6 | |
| PWC 54082 | HOLDING ADAPTER | 5 | |
| PWC-34913 | HOLDING FIX (BORESCOPE) | 14 | |
| PWC30027 | holding base | 1 | |
| PWC30057 | holding fixture | 3 | |
| PWC30059 | holding fixture | 4 | |
| PWC30114-08 | HOLDING WRENCH | 6 | |
| PWC30131 | FIXTURE-HOLDING | 3 | |
| PWC30252 | Holding Fixture | 2 | |
| PWC30269 | HOLDING RING | 8 | |
| PWC30274 | Holding Base | 6 | |
| PWC30331 | COMPRESSOR TURBINE HOLDING WRENCH | 9 | |
| PWC30405 | HOLDING FIXTURE ASSY | 8 | |
| PWC30406 | Holding Tool | 1 | |
| PWC30409 | holding adapter | 2 | |
| PWC30420 | Fixture Holding | 1 | |
| PWC30463 | BASE, HOLDING, SLEEVE | 3 | |
| PWC30491 | FIXTURE-HOLDING | 2 | |
| PWC30525 | holding fixture | 2 | |
| PWC30560 | holding fixture | 1 | |
| PWC30614 | holding base | 1 | |
| PWC30732 | holding fixture | 4 | |
| PWC30770 | holding base | 1 | |
| PWC30816 | WRENCH, HOLDING | 1 | |
| PWC30827 | FIXTURE, HOLDING | 2 | |
| PWC31063 | Fixture holding | 2 | |
| PWC32067 | HOLDING FIXTURE | 3 | |
| PWC32125 | Holding Fixture | 4 | |
| PWC32179 | BASE, SHAFT HOLDING | 5 | |
| PWC32209 | HOLDING ADAPTER - PRATT & WHITNEY CANADA | 6 | |
| PWC32226 | FIXTURE-HOLDING | 3 | |
| PWC32809 | holding adapter | 2 | |
| PWC32864 | Fix. Holding Bearing | 1 | |
| PWC33260 | Fixture Holding | 4 | |
| PWC34016 | Holding Fixture | 1 | |
| PWC34026 | Holding Base | 2 | |
| PWC34045 | Holding Fixture | 2 | |
| PWC34045-1 | FIXTURE-HOLDING | 1 | |
| PWC34193 | HOLDING FIXTURE | 1 | |
| PWC34530 | Holding Fixture | 3 | |
| PWC34593 | Holding Fixture | 4 | |
| PWC34593PM | HOLDING PLATE | 1 | |
| PWC34597 | Holding Fixture | 4 | |
| PWC34598 | Holding fixture | 3 | |
| PWC34599 | Holding fixture | 3 | |
| PWC34627 | Holding fixture | 1 | |
| PWC34912/PHP | FIXTURE, HOLDING | 1 | |
| PWC34913 | FIXTURE HOLDING | 14 | |
| PWC34913/PHP | BOROSCOPE HOLDING FIXTURE | 1 | |
| PWC34913E | FIXTURE, BORESCOPE HOLDING | 2 | |
| PWC34918 | BORESCOPE HOLDING FIXTURE | 1 | |
| PWC37004 | Holding Fixture | 2 | |
| PWC37110 | holding Adapter | 5 | |
| PWC37151 | H.P Disc Holding Fixture | 4 | |
| PWC37273 | holding adapter | 1 | |
| PWC37288 | Holding Fixture | 1 | |
| PWC37333 | holding Adapter | 1 | |
| PWC37360 | holding adapter | 1 | |
| PWC37364A | HOLDING ADAPTOR | 1 | |
| PWC37368 | holding Adapter | 3 | |
| PWC37388 | Holding Fixture | 2 | |
| PWC37540 | holding adapter | 6 | |
| PWC37601 | Holding Fixture | 1 | |
| PWC37650 | holding adapter | 3 | |
| PWC37692 | Holding Fixture | 2 | |
| PWC37692 | FIXTURE HOLDING, FUEL NOZZLE | 2 | |
| PWC37811 | HOLDING FIXTURE | 1 | |
| PWC37834 | Holding Fixture | 3 | |
| PWC37874 | holding adapter | 1 | |
| PWC37880 | Holding Fixture | 1 | |
| PWC37881 | holding adapter | 1 | |
| PWC37892 | holding fixture | 1 | |
| PWC37933 | holding adapter | 1 | |
| PWC38001 | holding Adapter | 5 | |
| PWC38101 | Holding Fixture | 2 | |
| PWC38142 | Holding Fixture | 1 | |
| PWC38151 | holding fixture | 1 | |
| PWC38231 | holding Adapter | 3 | |
| PWC38451 | holding fixture | 1 | |
| PWC38681 | Fixture, Holding, Second Stage Reduction Idler Gear | 1 | |
| PWC38682 | Fixture, Holding, Second Stage Reduction Idler Gear | 1 | |
| PWC40348 | HOLDING FIXTURE FRONT CASE | 1 | |
| PWC40350 | REMOVAL,AGB, HOLDING ADAPTER | 1 | |
| PWC40609 | Holding adapter | 1 | |
| PWC40610 | Holding bracket | 1 | |
| PWC41393 | FIXTURE-HOLDING, BORESCOPE | 1 | |
| PWC42079 | Holding Fixture No. 3 bearing housing | 1 | |
| PWC42096 | HOLDING BASE CT disk | 1 | |
| PWC42100 | HOLDING BASE- Impeller assembly | 1 | |
| PWC43053 | Fixture Holding | 2 | |
| PWC43053-2 | Fixture, Holding | 1 | |
| PWC43053-5 | Fixture, Holding | 1 | |
| PWC45053 | HOLDING FIXTURE | 1 | |
| PWC45069 | holding base | 1 | |
| PWC45150 | Holding Fixture | 1 | |
| PWC45226 | HOLDING FIXTURE | 1 | |
| PWC45324 | FIXTURE, HOLDING | 1 | |
| PWC46592 | HOLDING CONNECTOR | 1 | |
| PWC47006 | holding base | 1 | |
| PWC47066 | holding base | 1 | |
| PWC48377 | Holding Plate | 1 | |
| PWC50048 | FIXTURE-HOLDING | 1 | |
| PWC50121 | Holding base | 1 | |
| PWC50179 | holding fixture | 1 | |
| PWC50258 | holding fixture | 3 | |
| PWC50264 | holding fixture | 1 | |
| PWC50269 | HOLDING FIXTURE | 1 | |
| PWC50455 | HOLDING WRENCH/BRIDGE | 5 | |
| PWC50457 | Holding base | 1 | |
| PWC50528 | HOLDING FIXTURE | 1 | |
| PWC50531 | Holding Fixture | 1 | |
| PWC50596 | Fixture Holding | 1 | |
| PWC50606 | holding base | 4 | |
| PWC50607 | holding base | 4 | |
| PWC50618 | holding base | 4 | |
| PWC50630 | FIXTURE-HOLDING | 1 | |
| PWC50681 | holding base | 1 | |
| PWC50687 | HOLDING BASE | 1 | |
| PWC50723 | Holding base | 1 | |
| PWC50727 | HOLDING FIXTURE | 1 | |
| PWC50731 | Holding Fixture | 1 | |
| PWC50736 | Holding base | 1 | |
| PWC50739 | HOLDING, BASE | 1 | |
| PWC50842 | holding base | 1 | |
| PWC50883 | holding fixture | 1 | |
| PWC50939 | Holding fixture | 1 | |
| PWC50952 | Holding Base | 2 | |
| PWC51017 | holding fixture | 1 | |
| PWC51072 | holding fixture | 2 | |
| PWC51087 | HOLDING FIXTURE | 1 | |
| PWC51127 | HOLDING FIX. | 1 | |
| PWC51131 | Holding Fixture | 3 | |
| PWC51159 | Holding Tool | 3 | |
| PWC51165 | HOLDING BASE | 7 | |
| PWC51179 | holding base | 1 | |
| PWC51187 | holding base | 1 | |
| PWC51196 | Holding Plate | 1 | |
| PWC51201 | holding fixture | 1 | |
| PWC51225 | FIXTURE-HOLDING | 1 | |
| PWC51277 | HOLDING BASE | 1 | |
| PWC51499 | HOLDING, FIXTURE | 1 | |
| PWC51680 | Holding Base | 1 | |
| PWC51718 | Holding Base | 2 | |
| PWC51761 | holding fixture | 1 | |
| PWC51889 | holding base | 1 | |
| PWC51926 | HOLDING BASE | 1 | |
| PWC52871 | HOLDING BRACKET | 1 | |
| PWC54027 | HOLDING FIXTURE | 1 | |
| PWC54082 | holding adapter | 5 | |
| PWC54171 | holding fixture | 1 | |
| PWC54248 | HOLDING FIXTURE | 1 | |
| PWC54343 | holding base | 1 | |
| PWC54344 | holding base | 1 | |
| PWC54378 | HOLDING FIXTURE | 1 | |
| PWC54384 | holding base | 1 | |
| PWC54520 | FIXTURE HOLDING SHAFT | 1 | |
| PWC54576 | FIXTURE, HOLDING LH | 3 | |
| PWC54618 | holding fixture | 1 | |
| PWC54628 | holding base | 1 | |
| PWC54646 | holding base | 1 | |
| PWC54691 | holding base | 1 | |
| PWC54717 | holding adapter | 1 | |
| PWC54734 | holding adapter | 1 | |
| PWC54783 | FIXTURE-HOLDING | 1 | |
| PWC54788 | FIXTURE-HOLDING | 1 | |
| PWC54933 | holding adapter | 1 | |
| PWC54974 | holding fixture | 1 | |
| PWC55228 | Holding Base | 1 | |
| PWC55383 | holding fixture | 1 | |
| PWC55471 | HOLDING FIXTURE | 1 | |
| PWC55473 | HOLDING FIXTURE | 1 | |
| PWC55531 | RGB Holding Fixture | 2 | |
| PWC55885 | HOLDING BASE | 1 | |
| PWC55934 | Base Holding | 5 | |
| PWC55963 | HOLDING BASE | 5 | |
| PWC56030 | holding block | 1 | |
| PWC56031 | holding block | 1 | |
| PWC56047 | holding adapter | 1 | |
| PWC56343 | holding fixture | 1 | |
| PWC56344 | holding fixture | 1 | |
| PWC56346 | holding fixture | 1 | |
| PWC56927 | HOLDING FIXTURE | 1 | |
| PWC57254 | HOLDING FIXTURE | 1 | |
| PWC57323 | HOLDING BASE | 1 | |
| PWC57391 | HOLDING FIXTURE | 1 | |
| PWC57391-3 | HOLDING FIXTURE | 1 | |
| PWC57732 | holding adapter | 1 | |
| PWC58354 | Holding base | 1 | |
| PWC58404 | Holding tool | 1 | |
| PWC59069 | HOLDING FIXTURE | 1 | |
| PWC59073 | holding fixture | 1 | |
| PWC60158 | Holding Fixture | 1 | |
| PWC60613 | FIXTURE-HOLDING GEARSHAFT | 1 | |
| PWC62771 | FIXTURE - HOLDING | 1 | |
| PWC63158 | FIXTURE HOLDING | 1 | |
| PWC64007 | Fixture Holding | 2 | |
| PWC64199 | HOLDING FIXTURE | 1 | |
| PWC64493 | HOLDING FIXTURE | 1 | |
| PWC64589 | Fixture Holding | 1 | |
| PWC65444 | Holding Fixture | 1 | |
| PWC65446 | Holding Base | 1 | |
| PWC65590 | Fixture Holding turbine | 1 | |
| PWC65788 | HOLDING BASE | 1 | |
| PWC65798 | HOLDING BASE | 1 | |
| PWC65893 | HOLDING BASE | 3 | |
| PWC65913 | Holding Base | 1 | |
| PWC66806 | HOLDING FIXTURE | 1 | |
| PWC66857 | Holding base | 1 | |
| PWC67029 | Holding base | 1 | |
| PWC67197 | HOLDING FIXTURE | 1 | |
| PWC67456 | Holding Fixture | 1 | |
| PWC67457 | FIXTURE, HOLDING | 1 | |
| PWC67607 | holding fixture | 1 | |
| PWC67671 | holding fixture | 1 | |
| PWC67767 | holding adapter | 1 | |
| PWC67810 | HOLDING FIXTURE | 1 | |
| PWC67868 | HOLDING FIXTURE | 1 | |
| PWC67912 | holding fixture | 1 | |
| PWC68588 | Holding fixture | 1 | |
| PWC68667 | HOLDING FIXTURE | 1 | |
| PWC68973 | Holding fixture | 1 | |
| PWC69158 | Holding fixture | 1 | |
| PWC69271 | Holding fixture | 1 | |
| PWC69274 | Holding fixture | 1 | |
| PWC69275 | Holding fixture | 1 | |
| PWC69601 | HOLDING FIXTURE | 1 | |
| PWC69657 | Holding fixture | 1 | |
| PWC69665 | Holding fixture | 1 | |
| PWC69849 | Holding fixture | 1 | |
| PWC69854 | Holding fixture | 1 | |
| PWC69861 | Holding fixture | 1 | |
| PWC70028 | HOLDING FIXT | 1 | |
| PWC70092 | Holding Fixture | 1 | |
| PWC70313 | holding fixture | 1 | |
| PWC70404 | Holding Fixture | 1 | |
| PWC70466 | holding fixture | 1 | |
| PWC70553 | holding fixture | 1 | |
| PWC70599 | Holding Base | 1 | |
| PWC70630 | Holding Fixture | 1 | |
| PWC70672 | HOLDING BASE | 4 | |
| PWC70753 | Holding Fixture | 1 | |
| PWC70864 | HOLDING BASE, STARTER-GENERATOR | 2 | |
| PWC70930 | FIXTURE HOLDING ROTOR | 1 | |
| PWC70955 | FIXTURE HOLDING | 3 | |
| PWC71004 | holding ring | 1 | |
| PWC71016 | holding fixture | 1 | |
| PWC71125 | Holding Fixture | 1 | |
| PWC71285 | Holding Base | 1 | |
| PWC71304 | Holding Fixture | 1 | |
| PWC71304-1 | HOLDING BASE | 1 | |
| PWC71308 | Holding Base | 1 | |
| PWC71319 | Holding Base | 1 | |
| PWC71386 | holding adapter | 1 | |
| PWC71477 | holding base | 1 | |
| PWC71508 | HOLDING BASE | 1 | |
| PWC71516 | holding base | 1 | |
| PWC71546 | holding base | 1 | |
| PWC71628 | HOLDING BASE | 1 | |
| PWC71642 | holding fixture | 1 | |
| PWC71666 | holding adapter | 1 | |
| PWC71709 | HOLDING FIXTURE | 1 | |
| PWC71732 | holding fixture | 1 | |
| PWC71776 | Fixture Holding Compressor | 3 | |
| PWC71824 | holding fixture | 1 | |
| PWC71839 | Holding base | 1 | |
| PWC71941 | Holding Fixture | 1 | |
| PWC71979 | Holding Base | 1 | |
| PWC71987 | holding adapter | 1 | |
| PWC72107 | Holding fixture | 3 | |
| PWC72126 | LEAK TEST HOLDING FIXTURE | 1 | |
| PWC72131 | HOLDING BASE | 1 | |
| PWC72139 | HOLDING BASE | 1 | |
| PWC72146 | HOLDING FIXTURE | 1 | |
| PWC72195 | HOLDING BASE | 1 | |
| PWC72247 | HOLDING BASE | 1 | |
| PWC72318 | HOLDING BASE | 1 | |
| PWC72511 | HOLDING FIXTURE | 1 | |
| PWC72802 | HOLDING BASE | 1 | |
| PWC72820 | HOLDING BASE | 1 | |
| PWC72891 | HOLDING BASE | 1 | |
| PWC77028 | HOLDING FIXTURE-B37 | 1 | |
| PWC77135 | HOLDING BASE | 1 | |
| PWC77361 | HOLDING FIXTURE | 2 | |
| PWC89944 | HOLDING FIXTURE | 1 | |
| PYLZ-52251 | Holding Fixture | 1 | |
| PYLZ-52261 | Holding Fixture | 1 | |
| PYLZ-52261 PM | HOLDING FIXTURE | 1 | |
| PYLZ-53466 | HOLDING FIXTURE | 1 | |
| PYLZ-53467 | HOLDING FIXTURE | 1 | |
| Q21804 | Holding Fixture | 1 | |
| Q21804PM | HOLDING FIXTURE | 1 | |
| Q21813 | Holding Block | 1 | |
| Q21813 PM | HOLDING BLOCK | 1 | |
| Q47736 | HOLDING CARRIAGE | 4 | |
| QC1R50 | IDSC HOLDINGS LLC | 1 | |
| R46290 | HOLDING WRENCH FOR NUT | 1 | |
| RB 92700-10316- 041 | SPRING CAPSULE HOLDING CLAMP | 2 | |
| RB 92700-10316-041 | HOLDING CLAMP | 2 | |
| RB 92700-10339-041 | HOLDING FIXTURE | 2 | |
| RB PWC34913 | Fixture, Holding | 1 | |
| RB PWC51165 | Holding Base | 1 | |
| RB T101335 | Transmission 42 And 90 Degree Gearbox Holding Plate | 1 | |
| RB T101365 | Holding Fixture | 2 | |
| RB T101420 | Holding Fixture | 1 | |
| RB T101455 | PLATE ASSEMBLY, HOLDING | 2 | |
| RB T101508 | HOLDING FIXTURE SET, MAIN TRANSMISSION | 2 | |
| RB T101549 | Transmission Oil Cooler Holding Fixture | 1 | |
| RB T101555 | Tool Holding | 2 | |
| RB T101560 | Plate Holding | 2 | |
| RB T101564 | Plate Holding | 2 | |
| RB T101573 | Holding Fixture | 1 | |
| RB T101596 | Holding Fixture, Quill Assembly | 1 | |
| RB T101649-101 | Holding Tool R/B | 2 | |
| RB T101724 | Holding Fixture | 1 | |
| RB T101727-101 | Holding Fixture | 1 | |
| RB T101883 | Holding Fixture | 2 | |
| RB T101904 | Holding Plate Sleeve | 1 | |
| RB T101907 | Holding Fixture | 1 | |
| RB T101954 | Holding Plate Assembly | 1 | |
| RB T101972 | Holding Plate Set, Adapter, Tail Rotor Drive | 3 | |
| RB T101980 | Tail Rotor Drive Quill Main Transmission Holding Plate Set | 1 | |
| RB T102055 | Holding Fixture Assembly | 1 | |
| RB T102069 | Holding Fixture Assembly | 1 | |
| RB T102076 | Quill Assembly Gear Holding Fixture | 3 | |
| RB T102079 | Main Input Gear Holding Fixture | 1 | |
| RB T103029 | Wrench, Holding | 3 | |
| RB T103056 | Valve Assembly Holding Fixture Set | 1 | |
| RB T103063 | Tool Set Holding | 2 | |
| RB T103063P | TOOL SET HOLDING | 1 | |
| RB T103147-101 | Holding Fixture | 1 | |
| RB23033031 | Fixture-Holding Front Bearing Housing | 2 | |
| RB6795588 | Wrench-Holding, 32/64 Pitch 24 Tooth Spline | 2 | |
| RB6798037 | Fuel Nozzle Holding Fixture | 1 | |
| RB6798045 | Holding Gas Producer Turbine Wrench | 2 | |
| RB6893357 | 32/64 Pitch 27 Tooth Spline Holding Wrench | 2 | |
| RB6897875 | Fuel Nozzle Holding Fixture | 3 | |
| RB92700-10316-041 | HOLDING CLAMP | 2 | |
| RB92700-10339-041 | HOLDING FIXTURE, SWASHPLATE TRUNNION | 2 | |
| RBA5107-3 | Holding Fixture Input Gear "C" Model Main Rotor | 1 | |
| RBA5109-17 | Holding Fixture Output Gear "C" Model Main Rotor | 1 | |
| RBA5111-18 | Holding Fixture Output Gear "C" Model Tail Rotor | 1 | |
| RBA9822-3 | Holding Block | 4 | |
| RBA9822-3 & -5 | Tail Rotor S/P Holding Block (-3), Wr (-5) Set "C" Model | 2 | |
| RBD25121-30201 | Holding Fixture Input Gear | 1 | |
| RBD25125-30201 | Holding Fixture Output Gear | 1 | |
| RBD25430-30201 | Holding Fixture Gear Shaft Bev/Pin Output Tail Rotor | 1 | |
| RBD29822-3 | Tail Rotor Cross Head Holding Block | 2 | |
| RBD29822-3 & -5 | Tail Rotor Swash Plate Holding Block (-3), Wr (-5) Set 2 & 4 Bl "D,E&F" Model | 1 | |
| RBE332A93-3234-00 | Holding Wrench, Rotor Brake | 2 | |
| RBE350A93-3205-00E | Engine Gear Box Input Flange Holding Wrench | 2 | |
| RBE350A93-3205-00T | Tail Rotor Gear Box Input Flange Holding Wrench | 2 | |
| RBE672658 | Main Rotor Sleeve Bolt Holding Tool | 1 | |
| RBEM323U3007103 | MAIN LANDING GEAR SHOCK ABSORBER HOLDING TOOL | 2 | |
| RBEM642V5000102 | TAIL ROTOR HEAD DAMPER HOLDING TOOL KIT | 2 | |
| RBPWC34913 | FIXTURE, HOLDING | 1 | |
| RBT101307 | T/R DRIVE LINE HOLDING WRENCH | 2 | |
| RBT101555 | TOOL HOLDING | 2 | |
| RBT101649-101 | ROTORBRAKE HOLDING WRENCH | 2 | |
| RBT103063 | MAIN DRIVE SHAFT HOLDING TOOL | 2 | |
| RBT18585 | Collective Lever Holding Clamp | 1 | |
| RBT18801 | Tail Rotor Output Gear Holding Fixture Th55 | 1 | |
| RBT18900 | Notar Coupling Holding Wrench | 2 | |
| RBT400220 | HOLDING WRENCH | 2 | |
| RBT400223 | Mast Holding Tool (430-240-001-101) | 1 | |
| RBT400339 | Holding Fixture | 1 | |
| RBT400341 | Holding Fixture | 1 | |
| RF2P376A0002-00 | HOLDING FIXTURE | 1 | |
| RRT056945 | HOLDING TL | 1 | |
| RRT101925 | Holding Fixture | 1 | |
| RSEA220PW1524G-DIH-TD | DTI HOLDING BRACKET (COLLINS) | 1 | |
| RTA07-5-005 | FITTING-HOLDING,FR.27 | 1 | |
| RTA07-5-006 | FITTING-HOLDING,FR.36 | 1 | |
| RTA07-5-007 | FITTING-HOLDING,FR.59LH | 1 | |
| RTA07-5-008 | FITTING-HOLDING,FR.59RH | 1 | |
| SA-1777 | HOLDING FIXTURE | 1 | |
| SA30218 | HOLDING FIXTURE | 1 | |
| SAM20160 | HOLDING TOOL | 1 | |
| SEY64300 | TOYOTA DAMPER HOLDING TOOL | 1 | |
| SPL-14633 | WINGLET HOLDING FIXTURE | 1 | |
| SPL-5377 | Holding Fixture,LE Slat Actuator | 1 | |
| SPL-5427 | Holding Fixture | 1 | |
| SPL-5428 | Holding Fixture-Piston,L.E.Slat Actuator | 1 | |
| SPL-5429 | Holding Fixture | 1 | |
| SPL-5440 | Holding Fixture-Piston,L.E.Slat Actuator | 1 | |
| SPL-9359 | Fixture - Holding, MLG Actuator | 1 | |
| SPL-9361 | Fixture - Holding, MLG Actuator | 1 | |
| ST2580-343A-35 | HOLDING TOOL | 1 | |
| ST2598C-1 | Holding Tool Assy | 5 | |
| ST2598C-4 | Holding Tool Assy | 1 | |
| ST6396 | HOLDING FIXTURE | 1 | |
| ST71055 | Holding Tool, Diaphragm | 1 | |
| ST78712 | HOLDING FIXTURE | 1 | |
| ST879AF | Holding Fixture - Hand Presetting Tools, ST879A | 7 | |
| ST879AF-1 | Holding fixture for hand setting tools | 4 | |
| ST879AF-ML | HOLDING FIXTURE-HAND | 1 | |
| ST8870-7 | BOEING REFERENCE STANDARD, COMPOSITE LAMINATE STEP WEDGE( 1-10 PLY), PT 1 51-04-00, PAGE 21 FIGURE 8. SUPPLIED WITH HOLDING BLOCK | 4 | |
| ST8870-8 | BOEING REFERENCE STANDARD, COMPOSITE LAMINATE STEP WEDGE( 11-20 PLY), PT 1 51-04-00, PAGE 21 FIGURE 8. SUPPLIED WITH HOLDING BLOCK | 5 | |
| ST8870-9 | BOEING REFERENCE STANDARD, COMPOSITE LAMINATE STEP WEDGE( 21-30 PLY), PT 1 51-04-00, PAGE 19 FIGURE 8. SUPPLIED WITH HOLDING BLOCK | 4 | |
| ST8870B-7 | BOEING REFERENCE STANDARD, COMPOSITE LAMINATE STEP WEDGE WITH HOLDING PLATE. MATERIAL: BMS8-79 FIBERGLASS( 1-10 PLY), PT 1 51-04-00, PAGE 27 FIGURE 8. B737 NDT Part 1, 51-04-00. Includes C-Scan, Certification Report and Certificate of Conformance. | 3 | |
| ST8870B-8 | BOEING REFERENCE STANDARD, COMPOSITE LAMINATE STEP WEDGE WITH HOLDING PLATE. MATERIAL: BMS8-79 FIBERGLASS( 11-20 PLY), PT 1 51-04-00, PAGE 27 FIGURE 8. B737 NDT Part 1, 51-04-00. Includes C-Scan, Certification Report and Certificate of Conformance. | 3 | |
| ST8870B-9 | BOEING REFERENCE STANDARD, COMPOSITE LAMINATE STEP WEDGE WITH HOLDING PLATE. MATERIAL: BMS8-79 FIBERGLASS( 21-30 PLY), PT 1 51-04-00, PAGE 27 FIGURE 8. B737 NDT Part 1, 51-04-00. Includes C-Scan, Certification Report and Certificate of Conformance. | 3 | |
| ST8870C-7 | BOEING REFERENCE STANDARD, COMPOSITE LAMINATE STEP WEDGE WITH HOLDING PLATEBMS8-139 FIBERGLASS( 1-10 PLY), PT 1 51-04-00, PAGE 28 FIGURE 8. Includes C-Scan, Certification Report and Certificate of Conformance. | 2 | |
| ST8870C-8 | BOEING REFERENCE STANDARD, COMPOSITE LAMINATE STEP WEDGE WITH HOLDING PLATEBMS8-139 FIBERGLASS( 11-20 PLY), PT 1 51-04-00, PAGE 28 FIGURE 8. Includes C-Scan, Certification Report and Certificate of Conformance. | 2 | |
| ST8870C-9 | BOEING REFERENCE STANDARD, COMPOSITE LAMINATE STEP WEDGE WITH HOLDING PLATEBMS8-139 FIBERGLASS( 21-30 PLY), PT 1 51-04-00, PAGE 28 FIGURE 8. Includes C-Scan, Certification Report and Certificate of Conformance. | 2 | |
| ST92619 | Fixture, Holding | 1 | |
| ST93932 | BLOCK, HOLDING FIXTURE | 1 | |
| STD67658 | Holding Fixture | 1 | |
| STD67664 | Fixture Holding | 1 | |
| STD67673 | Fixture-Holding | 1 | |
| STD67674 | Holding Fixture | 1 | |
| T-193319 | Holding fixture | 1 | |
| T-21385 | Holding Fixture | 1 | |
| T-236165 | Adapter,Holding | 1 | |
| T-236165PM | ADAPTER,HOLDING | 1 | |
| T-27289 | FIXTURE, HOLDING METERING VALVE ASSY PRE | 1 | |
| T-304241 | Fixture,Holding | 1 | |
| T-304245 | Holding Fixture | 1 | |
| T-304270 | Fixture,Holding | 1 | |
| T-410871 | Holding Clamp | 1 | |
| T-414953 | Clamp Holding | 1 | |
| T-415102 | Holding Clamp | 1 | |
| T-418655 | Fixture Holding | 1 | |
| T-420659 | Clamp,Holding | 1 | |
| T-429970 | Fixture-Holding | 1 | |
| T-429970PM | FIXTURE-HOLDING | 1 | |
| T-436428 | HOLDING FIXTURE | 1 | |
| T-436877 | Holding Fixture | 1 | |
| T-437060 | Holding Plate | 1 | |
| T-437800 | Fixture Holding | 1 | |
| T-437876 | Fixture Holding | 1 | |
| T-437879 | Fixture Holding | 1 | |
| T-445057 | Fixture,Holding | 1 | |
| T-445057PM | FIXTURE,HOLDING | 1 | |
| T-445676-2 | Clamp - Holding | 1 | |
| T-446877 | FIXTURE HOLDING | 1 | |
| T-448043 | Yoke,Torque Holding Fixture | 1 | |
| T-448043PM | YOKE,TORQUE HOLDING FIXTURE | 1 | |
| T-449854 | Yoke Holding Fixture | 1 | |
| T-452424 | FIXTURE, HOLDING | 1 | |
| T-6 | HOLDING FIXTURE V4V792 | 1 | |
| T-61427 | Holding Fixture | 1 | |
| T-64471 | Torque Holding Fixture | 1 | |
| T-66054 | Holding Fixture | 1 | |
| T-71036 | Holding Fixture | 1 | |
| T-71037 | Holding Fixture | 1 | |
| T-73742 | Holding Tool | 1 | |
| T-8700 | BELLOW HOLDING FIXTURE | 1 | |
| T-8813959003 | Locking, Holding Tool | 1 | |
| T-8819958000 | Ring Holding Tool | 1 | |
| T-9320B | HOLDING FIXTURE | 1 | |
| T1 03029 | WRENCH, HOLDING | 1 | |
| T101307 | T/R DRIVE LINE HOLDING WRENCH | 1 | |
| T101365 | HOLDING FIXTURE | 1 | |
| T101420 | HOLDING FIXTURE | 1 | |
| T101447 | HOLDING FIXTURE | 1 | |
| T101455 | PLATE ASSEMBLY, HOLDING | 1 | |
| T101499 | 206/505 MAST HOLDING FIXTURE | 1 | |
| T101508 | HOLDING FIXTURE SET, MAIN TRANSMISSION | 1 | |
| T101555 | TOOL HOLDING | 1 | |
| T101560 | PLATE HOLDING | 1 | |
| T101563 | HOLDING FIXTURE | 1 | |
| T101564 | PLATE HOLDING | 1 | |
| T101573 | HOLDING FIXTURE | 1 | |
| T101596 | HOLDING FIXTURE, QUILL ASSEMBLY | 1 | |
| T101649-101 | ROTORBRAKE HOLDING WRENCH | 1 | |
| T101883 | Holding Fixture 2pcs | 1 | |
| T101883-11 | Holding Fixture | 1 | |
| T101883-3 | Holding Fixture | 1 | |
| T101904 | HOLDING PLATE SLEEVE | 1 | |
| T101972 | HOLDING FIXTURE | 1 | |
| T102069 | HOLDING FIXTURE ASSEMBLY | 1 | |
| T102076 | QUILL ASSEMBLY GEAR HOLDING FIXTURE | 2 | |
| T103029 | WRENCH, HOLDING | 1 | |
| T103063 | MAIN DRIVE SHAFT HOLDING TOOL | 1 | |
| T103263 | BEARING HOLDING BAR | 1 | |
| T103328-101 | ADAPTER, HOLDING FIX | 1 | |
| T1148 | FIXTURE, HOLDING | 1 | |
| T119200 | FIXTURE-CDU HOLDING | 1 | |
| T119295 | GIMBAL HOLDING FIXTURE | 1 | |
| T12077 | TORQUE HOLDING FIXTURE | 1 | |
| T12077B | TORQUE HOLDING FIXTURE | 1 | |
| T14-0733 | HOLDING FIXTURE | 1 | |
| T25716 | FIXTURE, HOLDING, VALVE ASSEMBLY | 1 | |
| T26789 | Fixture Holding | 1 | |
| T27260 | FIXTURE - HOLDING | 1 | |
| T27261 | Fixture Holding | 1 | |
| T27289 | Fixture, Holding Metering Valve Assy Preset | 1 | |
| T27360 | FIXTURE - HOLDING | 1 | |
| T3008129 | HOLDING FIXTURE | 1 | |
| T3015859 | HOLDING FIXTURE AND PUNCHES | 1 | |
| T304025 | FIXTURE,HOLDING,LAP | 1 | |
| T304270 | FIXTURE - HOLDING | 1 | |
| T304672 | FIXTURE HOLDING | 1 | |
| T321639 | VIBRATION AND HOLDING FIXTURE | 1 | |
| T324796 | FNC HOLDING TRAY | 1 | |
| T325330 | CDU HOLDING TRAY | 1 | |
| T326392 | HIGH VOLTAGE POWER SUPPLY HOLDING FIXTURE | 1 | |
| T327604-9001 | COOLING HOLDING FIXTURE | 1 | |
| T3695-09 | FIXTURE PISTON HOLDING | 1 | |
| T3695-13 | Holding Fixture ( 4 ITEMS) | 1 | |
| T39265 | SCREW HOLDING | 1 | |
| T400220 | HOLDING WRENCH | 1 | |
| T410871 | CLAMP HOLDING | 1 | |
| T415102 | HOLDING CLAMP | 1 | |
| T420923 | FIXTURE END PLAY HOLDING | 1 | |
| T446610 | HOLDING FIXTURE | 1 | |
| T449854 | YOKE HOLDING FIXTURE | 1 | |
| T450165 | HOLDING FIXTURE | 1 | |
| T452935 | HOLDING FIXTURE | 1 | |
| T45331 | HOLDING TOOL | 1 | |
| T460339 | MOTOR HOLDING FIXTURE | 1 | |
| T462168 | Bearing Holding Fixture | 1 | |
| T47477 | HOLDING TOOL | 1 | |
| T6 | HOLDING FIXTURE V4V792 | 1 | |
| T7407035 | HOLDING AND COUNTER TOOL | 1 | |
| T74334 | HOLDING FIXTURE ACTUATOR | 1 | |
| T74338 | HOLDING FIXTURE ACTUATOR | 1 | |
| T810515V90073 | TOOLING – HOLDING PIN | 1 | |
| T810658-1V90073 | ADJUSTABLE HOLDING JIG | 1 | |
| T83658 | Holding Fixture And Alignment | 1 | |
| T8491 | HOLDING FIXTURE | 1 | |
| T852412 | HOLDING FIXTURE | 1 | |
| T8741 | FIXTURE-STABLE ELEVENT HOLDING | 1 | |
| T92-49034 | HOLDING FIXTURE | 1 | |
| T9249034 | HOLDING FIXTURE | 1 | |
| T9320A | HOLDING FIXTURE | 1 | |
| T9320B | HOLDING FIXTURE | 1 | |
| TA00331 | HOLDING FIXTURE | 1 | |
| TA00625 | HOLDING FIXTURE | 1 | |
| TA06018 | Holding Fixture | 1 | |
| TAB10022V | VACUUM HOLDING ADP 48MM X 3MM | 1 | |
| TAB10025V | VACUUM HOLDING ADP 45MM X 3MM | 1 | |
| TAF00458 | WORM GEAR HOLDING FIXTURE | 1 | |
| TB3038G001 | IGV BLADE HOLDING FIXTURE | 1 | |
| TB7006G001 | HOLDING RELIEF VALVE FIXTURE | 1 | |
| TB7007G001 | HOLDING FIXTURE | 1 | |
| TBS004 | PTI HOLDING FIXTURE SERVO ACTUATOR | 1 | |
| TCH-B1-.375-45/30 | Holding Block | 1 | |
| TCH-B2-.375-45/30 | Holding Block | 1 | |
| TD1616 | HOLDING FIXTURE | 1 | |
| TD27804 | HOLDING FIXTURE | 1 | |
| TD3017-001 | HOLDING FIXTURE FIRST STAGE ASSEMBLY | 1 | |
| TE-150944H | HOLDING FIXTURE (3 ITEMS) | 1 | |
| TE12FUA | WRENCH TORQUE (IDSC HOLDING LLC, DBA SNAP-ON INDUSTRIAL DIV) | 3 | |
| TE250FU | WRENCH TORQUE (IDSC HOLDING LLC, DBA SNAP-ON INDUSTRIAL DIV) | 4 | |
| TE3FUA | WRENCH TORQUE (IDSC HOLDING LLC, DBA SNAP-ON INDUSTRIAL DIV) | 7 | |
| TE50FFUA | WRENCH TORQUE (IDSC HOLDING LLC, DBA SNAP-ON INDUSTRIAL DIV) | 3 | |
| TE602FUA | WRENCH TORQUE (IDSC HOLDING LLC, DBA SNAP-ON INDUSTRIAL DIV) | 4 | |
| TE65B80308 | FIXTURE - HOLDING, CONTROL COLUMN | 1 | |
| TF-10856-1 | HOLDING FIXTURE | 1 | |
| TGH15 | TIMING GEAR HOLDING TOOL | 1 | |
| THSA-01 | HOLDING FIXTURE (2 IT) | 1 | |
| THSA-02 | HOLDING FIXTURE (3 IT) | 1 | |
| THSA-03 | HOLDING FIXTURE (2 IT) | 1 | |
| TL5766 | FIXTURE HOLDING | 1 | |
| TM0801G002 | HOLDING AND GUIDING TOOL | 1 | |
| TM1991G001 | INSTALLATION HOLDING TOOL OF 11MU | 1 | |
| TM2548G001 | HOLDING TOOL | 1 | |
| TM5873G002 | HOLDING TOOL | 1 | |
| TM5945G001 | HOLDING TOOL | 1 | |
| TM6325G001 | HARNESS HOLDING SHEATH | 1 | |
| TM7159G001 | HOLDING TOOL - METALIC | 1 | |
| TM7670G001 | NFT FLYWEIGHT HOLDING TOOL | 1 | |
| TM7671G001 | NFT FLYWEIGHT HOLDING TOOL | 1 | |
| TMA2159 | HOLDING FIXTURE | 1 | |
| TMA2292 | HOLDING FIXTURE | 1 | |
| TO9638 | ACTUATOR HOLDING TOOL | 1 | |
| TSJ5-87879-1 | Holding Fixture - Control Column | 1 | |
| TSJ50-3309-2 | LEVER ASSY -0 HOLDING FIXTURE | 1 | |
| TSJ50-6875 | HOLDING FIXTURE | 1 | |
| TWA-W730074-00 | HOLDING FIXTURE | 1 | |
| TX 30492P | HOLDING FIXTURE | 1 | |
| U21849000 | HOLDING TOOL | 4 | |
| U21892 | TOOL - HOLDING | 7 | |
| U21961 | HOLDING TOOL | 1 | |
| U21964 | HOLDING TOOL | 1 | |
| U21978 | HOLDING FIXTURE | 2 | |
| UFG23122E1G | HOLDING PIECE | 1 | |
| UGD231-25E1G | HOLDING DEVICE | 1 | |
| UGD231-33E1G | HOLDING DEVICE | 1 | |
| VM0-227 | HOLDING DEVICE | 1 | |
| VM0-228 | HOLDING DEVICE | 1 | |
| VQPWA77504 | HOLDING STAND, GG | 1 | |
| YA4660 | CAMSHAFT SPROCKET HOLDING TOOL | 1 | |
| YA732A | GUN GREASE (IDSC HOLDING LLC, DBA SNAP-ON INDUSTRIAL DIV) | 2 | |
| YA734A | GUN GREASE (IDSC HOLDING LLC, DBA SNAP-ON INDUSTRIAL DIV) | 5 | |
| YA735 | PUMP,AIR,EMISSION C (IDSC HOLDINGS LLC) | 2 | |
| YA745A | GUN GREASE (IDSC HOLDING LLC, DBA SNAP-ON INDUSTRIAL DIV) | 1 | |
| YA7500 | GUN GREASE (IDSC HOLDING LLC, DBA SNAP-ON INDUSTRIAL DIV) | 8 | |
| lC600l | FIXTURE, HOLDING- LOW PRESSURE TURBINE ROTOR FORWA | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
