| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| B27025-10 | HOLD ASSY | 1 | |
| B27025-51 | HOLD ASSY | 1 | |
| B27025-9 | HOLD ASSY | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) C78012-14 | HOLD OPEN EQPT. ROD ASSY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9275204-0001 | No 1 Flap Track Holder Assy (CALIBRATION) (CALIBRATION) | 1 | |
| 101061 | Holding Block Housing Assy. | 2 | |
| 0319957400 | HOLDER ASSY,FILTER | 1 | |
| 14313-009 | ROD ASSY HOLD DOWN | 1 | |
| 16A11193-3 | FIXTURE ASSY, HOLDING - RIB/SPAR, BL 71, LH | 1 | |
| 16A11194-3 | FIXTURE ASSY, HOLDING - RIB/SPAR, BL 71, RH | 1 | |
| 16A11195-3 | FIXTURE ASSY, HOLDING - RIB/SPAR, EL 120, LH | 1 | |
| 16A11196-3 | FIXTURE ASSY, HOLDING - RIB/SPAR, EL 120, RH | 1 | |
| 196K4006 | HOLD OPEN ASSY - FAN COWL DOOR | 1 | |
| 196K4006 REV E | HOLD OPEN ASSY - FAN COWL DOOR | 1 | |
| 196K4013 | HOLD OPEN ASSY - FAN COWL DOOR | 1 | |
| 196K4013 REV NC | HOLD OPEN ASSY - FAN COWL DOOR | 1 | |
| 281173 | WRENCH AND HOLDER VALVE ASSY | 1 | |
| 281180 | WRENCH AND HOLDER VALVE ASSY | 1 | |
| 281878-1-1 | TURBINE WHEEL ASSY HOLDER | 1 | |
| 285702-1-1 | HOLDER ASSY, DIAPHRAGM | 1 | |
| 287137-1-1 | Rod Holder Assy | 1 | |
| 287559-1 | HOLDER SHAFT ASSY DRIVE | 1 | |
| 2896391 | WRENCH-HOLDING,STARTER G/SHAFT ASSY | 2 | |
| 291638-1 | HOLDER ASSY THERMOSTAT | 1 | |
| 293410-1 | HOLDER ASSY, TURBINE MODULE | 1 | |
| 294889-1 | ROTATING ASSY HOLDER | 1 | |
| 298106-1 | HOLDING&INDEXING FIXTURE ASSY | 1 | |
| 298106-2 | HOLDING & INDEXING FIXTURE ASSY | 1 | |
| 360A93-3225-20 | SEAL HOLDER ASSY DRIFT | 1 | |
| 369029822-3 | PITCH CONTROL ASSY HOLDING BLOCK | 1 | |
| 369D29822-3 | PITCH CONTROL ASSY HOLDING BLOCK | 1 | |
| 4133801060 | HOLDER - WHEEL ASSY | 7 | |
| 58449-1 | DIE HOLDER ASSY; AMPLIMITE | 1 | |
| 636GSE3009-702 | 636GSE3009-702 (RH HOLD OPEN STRUT ASSY) | 1 | |
| 6796144 | HOLDER - TORQUEMETER SHAFT ASSY | 1 | |
| 6796667 | Holding Fixture Compressor Housing Assy Grit Blast | 2 | |
| 6797012 | HOLDER - COMP EXTENSION SHAFT ASSY | 1 | |
| 6872596 | FIXTURE - HOLDING, TURB AND EXHAUST COLL SUP ASSY | 1 | |
| 69-42136-31 | HOLDER ASSY-MAP VARIABLE | 1 | |
| 69-42136-35 | HOLDER ASSY-MAP VARIABLE | 1 | |
| 70009712P002 | RH IPAD HOLDER ARM ASSY | 1 | |
| 7ME65B01202-1 | STRAP HOLD ASSY | 1 | |
| 856A5722G01 | FIXT, HOLD. AIR COOLING MANIFOLD & TUBE ASSY | 1 | |
| 8600175 | HOLD DOWN ASSY | 3 | |
| 81267200 | PLUNGER DISC HOLDER ASSY | 1 | |
| 8C2728G01 | Fixture,holding-hpt case assy/removal stg 2 hpt hanger | 1 | |
| 98D54503000000 | HOLD OPEN ASSY | 22 | |
| 98D71203014042 | Ratchet tool holder assy | 3 | |
| A21008-1 | OUTFLOW VALVE HOLD OPEN SET (ASSY) | 14 | |
| A2711-1 | STRUT ASSY - HOLD OPEN SPRT | 1 | |
| A27126-1 | Holding Fixture - Inpt Rod Assy, Elevator Pwr Ctrl | 3 | |
| A3068-7 | STRUT ASSY HOLD OPEN | 1 | |
| A3410-2 | STRUT ASSY HOLD OPEN | 5 | |
| A3482-4 | ROD ASSY HOLD OPEN | 1 | |
| A36005-15 | HOLD OPEN ASSY | 11 | |
| A3702-1 | ROD ASSY-HOLD OPEN | 1 | |
| A71001-116 | AFT Bracket Assy-Hold Open | 3 | |
| A71030 | FAN COWL HOLD OPEN ASSY | 1 | |
| A71030-33 | LH HOLD OPEN ASSY | 1 | |
| A71030-34 | RH HOLD OPEN ASSY | 1 | |
| A71032-19 | HOLD OPEN ASSY | 1 | |
| A71032-21 | HOLD OPEN ASSY AFT(LH) | 1 | |
| AGE-03382-401 | Hold open rod assy | 1 | |
| AGE10337 | FIXTURE ASSY, HOLDING | 2 | |
| AGE13255 | ADAPTER, ASSY., HOLDING FIXTURE-T50 AMAD | 1 | |
| AGE13934 | FIXTURE, ASSY HOLDING | 1 | |
| AJ65B80482 | HOLDING FIXTURE - QUADRANT ASSY, ELEVATOR CONTROL | 1 | |
| AM-2079-300 | SWIVEL LOCK HOLDER ASSY | 1 | |
| B27025-44 | Flap Hold Assy | 1 | |
| B27025-6 | Flap Hold Assy | 1 | |
| B27025-7 | Flap Hold Assy | 1 | |
| B71020-40 | Hold Open Assy, Core Cowl | 1 | |
| B71020-75 | Hold Open Assy, Thrust Reverser | 3 | |
| B78013-3 | Holder Assy | 3 | |
| BCREFD00787 | ROD ASSY HOLD OPEN | 1 | |
| C32008-1 | Holding Fixture-MLG Damper Assy | 3 | |
| C32034-82 | Chock Holder Assy | 1 | |
| C32046-1 | Holding Fixture Eqpt-Shimmy Damper Assy-MLG | 10 | |
| C32046-25 | Holding fixture eqpt-shimmy damper assy，MLG | 3 | |
| C32046-27 | Holding fixture assy | 1 | |
| C52001-2 | Holding fixture assy | 1 | |
| C78001-14 | FITTING ASSY HOLD-OP | 4 | |
| C78012-15 | Rod Assy-Lh T/R Cowl Hold Open | 6 | |
| C78012-16 | Rod Assy-Rh T/R Cowl Hold Open | 6 | |
| C78012-3 | Rod assy，LH t/r hold open | 2 | |
| C78012-4 | Rod assy，rh t/r hold open | 2 | |
| C78019-15 | HOLD OPEN ASSY | 29 | |
| C78019-16 | Hold Open Assy | 1 | |
| CG9275203-0001 | HOLDER ASSY FLAP TRACK NO | 1 | |
| CG9275204-0001 | HOLDER ASSY FLAP TRACK NO | 1 | |
| CG9275206-0001 | HOLDER ASSY NO FLAP TRACK | 1 | |
| D73D71445-101 | ANGLE ASSY-THRESHOLD | 1 | |
| DZZ7040-1 | BRACE HOLD ASSY | 1 | |
| DZZ7040-501 | BRACE HOLD ASSY | 1 | |
| Ex-74971 | Fixture, holding, compressor vane assy | 1 | |
| Ex-74972 | Fixture, holding, compressor vane assy | 1 | |
| F618S52 | MLG STRUT CAP ASSY HOLDING TOOL. | 1 | |
| F70053 | WRENCH ASSY -0 METERING PIN USED TO HOLD THE | 1 | |
| F71263 | FIXTURE ASSY-AILERON GEARBOX TO HOLD THE | 1 | |
| F71268 | WRENCH ASSY -0 AIR COND. ADAPTER SEC. TO HOLD | 1 | |
| F72924-1 | Holder - ST Jackscrew Ballnut & Screw Assy | 8 | |
| F80091-1 | THRESHOLD ASSY | 1 | |
| F80094-4 | HOLDING FIXTURE ASSY | 1 | |
| F80096-4 | HOLD FIXTURE ASSY | 10 | |
| F80096-7 | HOLDING FIXTURE ASSY | 7 | |
| F80189-1 | HOLDING FIXTURE-BRAKE VALVE ASSY (2 IT) | 1 | |
| FDS-14406 | Assy Holding Fixture | 1 | |
| FDS-18564 | Assy Holding Fixture | 1 | |
| FDS-19079 | Assy Holder | 1 | |
| FDS-2636 | Assy Holding Fixture | 1 | |
| FDS14406 | ASSY HOLDING FIXTURE | 1 | |
| FDS18564 | ASSY HOLDING FIXTURE | 1 | |
| FDS2636 | ASSY HOLDING FIXTURE | 1 | |
| G21009-74 | Holder Assy | 1 | |
| G32080-1 | BRACKET HOLDING ASSY AND WRENCH KIT, MACHINED BRACKET | 2 | |
| G670272401-7 | RULER HOLDER ASSY | 1 | |
| G71022-54 | HOLD OPEN ASSY | 9 | |
| G71037-16 | Hold open right arm assy | 5 | |
| G71037-17 | Hold open left arm assy | 3 | |
| G71037-18 | Hold open center beam assy | 3 | |
| G78002-1 | HOLD OPEN ASSY | 14 | |
| G78002-3 | HOLD OPEN ASSY | 1 | |
| GS13165-1 | FIXTURE, ROTATIVE ASSY HOLDING | 2 | |
| GS20395-1 | TO HOLD THE PROPELLER ON THE BENCH ASSY AND HOIST | 1 | |
| GSE809- 212A4002-HF | HOLDING FIXTURE AFT PNEUMATIC SOURCE ASSY & TEST | 1 | |
| HS9612-1 | CONTROL ASSY HOLDER | 1 | |
| IAE1J12541 | SUPPORT HOLDING ENGINE ASSY LPC ROTOR INTERMEDIATE | 3 | |
| IAE1P16271 | Fixture, Holding, DEP Assy | 5 | |
| J25013-12 | HOLDING ANGLE ASSY | 1 | |
| J25013-3 | HOLDING ASSY | 1 | |
| J25013-47 | HOLDING ASSY - HOIST EQUIPMENT, FORWARD OFCR | 2 | |
| J25013-48 | HOLDING ASSY | 1 | |
| J25013-51 | HOLDING ANGLE ASSY | 1 | |
| J27034-14 | holder assy | 1 | |
| J36020-76 | Hold down pin assy | 1 | |
| J78003-28 | HOLD OPEN ASSY | 1 | |
| J78006-1 | ASSY HOLD OPEN FAN COWLS - SUP BY-11 | 7 | |
| J78006-11 | ASSY HOLD OPEN FAN COWLS - SUP BY-11 | 11 | |
| K27004-166 | PCU HOLDER ASSY | 1 | |
| K32019-68 | HOLDING PIN ASSY | 1 | |
| K32040-7 | Holding pin assy | 1 | |
| K52005-53 | Threshold Assy | 1 | |
| K52041-4 | HOLDER ASSY | 1 | |
| K71001-144 | AFT HOLD OPEN ASSY | 2 | |
| K71001-16 | FWD HOLD OPEN ASSY | 4 | |
| K71001-17 | AFT hold open assy | 1 | |
| K71001-26 | HOLD OPEN CENTER ASSY | 1 | |
| K71002-110 | Fwd Tr Hold Open Assy | 1 | |
| K71002-114 | FWD hold open strut assy | 1 | |
| K78009-3 | LH HOLD OPEN ASSY | 1 | |
| K78009-4 | RH HOLD OPEN ASSY | 1 | |
| K78011-8 | FWD tr hold open assy | 1 | |
| LTCT2037 | HOLDER ASSY | 1 | |
| LTCT2039 | HOLDER ASSY | 1 | |
| LTCT5769 | Assy. Holding Fixture | 1 | |
| LTCT6007 | HOLDER ASSY | 1 | |
| PWA101184 | HOLDER RIGGING ENGINE ASSY HPC ACTUATOR ROC | 1 | |
| PWA25215 | HOLDER - AGB T/SFT BRG HSG DISASSY_[PWA25215] | 2 | |
| PWA25231 | HOLDER - AGB INNER HOUSING DISASSY_[PWA25231] | 2 | |
| PWA25757 | PEDESTAL - FIXED, ENG ASSY SUPPORT_TO HOLD THE ENG HORIZONTALLY SUPPORT_1280 X 610 X 610 MM / 30.9 KG_[PWA25757] | 5 | |
| PWA25926 | ADAPTER-ENG ASSY SUPPORT PEDESTAL_TO HOLD ENG HORIZONTALLY ASSY/DIS-ASSY_1397 X 610 X 610 / 31.8 KG_[PWA25926] | 4 | |
| PWA85108-8 | PLUG HOLDING ENG. ASSY. | 1 | |
| PWA85108-C | PLUG HOLDING ENG. ASSY. | 1 | |
| PWA85110 | PLUG HOLDING ENG. ASSY. | 1 | |
| PWA85111 | PLUG HOLDING ENG. ASSY. | 1 | |
| PWC30405 | HOLDING FIXTURE ASSY | 8 | |
| PWC67069 | Holder HPT Assy. | 1 | |
| PWC67490 | Holder HPT Assy. | 1 | |
| PWC68647 | DEBURRING HOLDER-HP DISC ASSY | 1 | |
| SE27-1001 | HOLDER ASSY -0 STABILIZER TRIM JACKSCREW USED TO | 1 | |
| SE27-1011 | HOLDER ASSY -0 STABILIZER TRIM JACKSCREW USED TO | 1 | |
| ST2598C-1 | Holding Tool Assy | 5 | |
| ST2598C-4 | Holding Tool Assy | 1 | |
| ST9000A2 | Holder Assy | 1 | |
| T-27289 | FIXTURE, HOLDING METERING VALVE ASSY PRE | 1 | |
| T-415102 | HOLDING FIXTURE ASSY | 1 | |
| T101447 | HOLD FIXTURE, XMSN QUILL ASSY | 1 | |
| T101455 | PLATE ASSY,HOLDING O | 1 | |
| T103029 | HOLDER T/R QUILL ASSY | 1 | |
| T27289 | Fixture, Holding Metering Valve Assy Preset | 1 | |
| TSJ50-3309-2 | LEVER ASSY -0 HOLDING FIXTURE | 1 | |
| WCA7110G001-001 | FAN COWL HOLD OPEN ROD ASSY | 1 | |
| WT-53918 | HOLD GEAR ASSY | 1 | |
| XPWA211625 | Adapter,holding-eng assy,#6 brg washer | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
