| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 0235290070 | HINGE | 1 | |
| 0411602-1 | HINGE | 1 | |
| 1001 | HINGE | 10 | |
| 388171-19 | HINGE | 1 | |
| 389885-7 | HINGE | 1 | |
| 3920208515 | HINGE | 1 | |
| 41363-002 | HINGE | 1 | |
| 70212-05004-118 | HINGE | 1 | |
| 70217-01014-012 | HINGE | 1 | |
| 95-25927-001 | HINGE | 1 | |
| 95-25927-0101 | HINGE | 1 | |
| 9855050-3 | HINGE | 1 | |
| 98A52307628104 | HINGE | 1 | |
| 98D52307515000 | HINGE | 34 | |
| 98D52307515000REP13 | HINGE | 1 | |
| 98D53403001000 | HINGE | 1 | |
| A55004-44 | HINGE | 1 | |
| ABS0749-01 | HINGE | 1 | |
| ABS1014A061650P | HINGE | 1 | |
| B49002-23 | HINGE | 1 | |
| B49002-24 | HINGE | 1 | |
| C29002-24 | Hinge | 1 | |
| C78014-6 | HINGE | 15 | |
| CDSP4907U503 | HINGE | 1 | |
| CDSP4907U507 | HINGE | 1 | |
| D94148-411 | HINGE | 1 | |
| D94148-701 | HINGE | 1 | |
| ECARB-3 | HINGE | 1 | |
| F0497317 | HINGE | 1 | |
| F72977-31 | HINGE | 1 | |
| F72977-32 | HINGE | 1 | |
| J27046-15 | HINGE | 1 | |
| JCW65A8 | HINGE | 1 | |
| MS20001-5 | HINGE | 1 | |
| QZ1019 | HINGE | 1 | |
| S6120-65165-19 | HINGE | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| C78018-62 | Aft Hinge Fitting | 3 | |
| (CALIB) 98D27309012000 | HINGE FTING REAMER SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D52003006000 | HOLDING HOLDIND-REPLACE FITTING HINGE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D52307523001 | EXTRACT EXTRACTOR-HINGE PINS,CARGO DOOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F52003005000 | REAR REAR-NLG DOOR HINGE REPAIR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L53809020000 | POS TOOL - HINGE FITING 1 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L55109009000 | INSTALL - HINGE PIN (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L55209001000 | HINGE FITING- REAMER SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L57703001000 | TOOL TOOL SET,HINGE BEARING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V32109004000 | HINGE 2 GREASING, MLGD (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HU87127 | R-I NO.2 HINGE PIN (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HU87128 | EXTRACTR EXTRACTOR, R-I NO.3,4 HINGE PIN (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HU87129 | EXTRACTOR-R I N.5 HINGE PIN T R (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HU88000 | SLING SLING-R I HINGED COWLS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HU88000-1 | SLING-R I HINGED COWLS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K27047-1 | R/I EQPT - HINGE PANEL (CALIBRATION) (CALIBRATION) | 1 | |
| 002A0003-120 | TOP KIT, MLG HINGE DOOR | 2 | |
| 0061R41642 | CDSS CD HINGE INTERFACE CABLE | 1 | |
| 0061R50003 | HINGE ASSEMBLY PIN PRESS FIXTURE | 1 | |
| 02-275-12 | HINGE HOLE OPENER | 1 | |
| 02-275-12C | HINGE HOLE OPENER | 1 | |
| 02-275-5 | HINGE HOLE OPENER | 1 | |
| 02-275-5C | HINGE HOLE OPENER | 1 | |
| 02-276-10A | HINGE HOLE OPENER | 1 | |
| 02-276-15B | HINGE HOLE OPENER | 1 | |
| 0752609-27 | PIN HINGE | 1 | |
| 0781314007 | HINGE PIN / SCREW, DRAWING ITEM -20 | 1 | |
| 1-27303A | HINGE SCREW | 1 | |
| 1-388408-3 | LEAF HINGE LOWER AFT LEADING EDGE | 1 | |
| 1-58009A | BHCS 1/4-20X.375/PH HINGE | 1 | |
| 1-60709A | FRICTION HINGE SCREW 8-32X5/16 | 1 | |
| 10-27375E | HINGE ASSY, BRUSHED BLUE | 1 | |
| 1001 | HINGE | 10 | |
| 109-3101-38-1 | WRENCH, MAIN ROTOR HINGES | 1 | |
| 109-3101-39-1 | ADAPTER ASSY, MAIN ROTOR HINGES | 1 | |
| 1159CSM20139-15 | FITTING HINGE | 1 | |
| 1234630-1 | HINGE ASSY. | 1 | |
| 12445-052-001 | BEARING MLG INBOARD DOOR HINGE REMOVAL TOOL | 1 | |
| 1245 | Hinge Tee | 2 | |
| 125-120 | HINGED HOOK + PIN SPANNER | 1 | |
| 125-35 | HINGED HOOK + PIN SPANNER | 1 | |
| 125-50 | HINGED HOOK + PIN SPANNER | 1 | |
| 125-80 | HINGED HOOK + PIN SPANNER | 1 | |
| 125A.35 | HINGED HOOK + PIN SPANNER | 1 | |
| 125A.50 | 125A. HINGED HOOK + PIN SPANNER - 35 - 50MM X 4MM | 1 | |
| 125A.80 | HINGED HOOK + PIN SPANNER | 1 | |
| 12902-067264 | HINGED COILS | 1 | |
| 133-384036-1 | CANOPY HINGE PIN INSTALLATION KIT | 1 | |
| 133-384036-1 | CANOPY HINGE PIN INS TALLATION KIT | 1 | |
| 145-76655-401 | HINGE ASSY | 1 | |
| 145-T06312-401 | HINGE STABLIZER ASSY | 1 | |
| 145T06312-401 | HINGE STABILIZER, ASSY | 1 | |
| 1506-A | WRENCH HANDLE, HINGED 3/8 | 1 | |
| 1506-AA | WRENCH HANDLE, HINGED 1/4 | 1 | |
| 1581A25 | HINGE PIANO 0.60X1.25 ALU | 1 | |
| 1581A69 | PIANO HINGE ALUMINIUM 2" WIDTH 36" LONG | 1 | |
| 1582A146 | HINGE SST NO HOLE 11/2OPENX48"LG 0.091PIN | 1 | |
| 1582A153 | HINGE SST 2ÓX.040 | 1 | |
| 1582A217 | HINGE SST 1Ó1/16X0.50TH. | 1 | |
| 158A25 | HINGE, 5052 ALUMINIUM, .060"x1.25"x6' | 1 | |
| 15D52880165000 | GUIDE, MLG DOOR HINGE HOLES | 1 | |
| 15V233 | PIANO HINGE, MUSIC WIRE 1/8" | 1 | |
| 170-62181-409 | ACCESS DOOR UPPER, HINGE 1 ASSY | 1 | |
| 180600-220-2 | HORIZONTAL HINGE AXLE | 1 | |
| 18D12142-1 | BEARING TOOL SET, TAIL PYLON HINGE H-60 | 1 | |
| 190-32826-021 | BUSHING SPOILER HINGE, CRES, T.E. | 3 | |
| 190074 | HINGE: FRICTION, | 2 | |
| 1AE1N20016 | THREAD PROTECTOR, HINGE SHOULDER BOLT | 1 | |
| 1AE1N20016 REV A | THREAD PROTECTOR, HINGE SHOULDER BOLT | 1 | |
| 1C8031 | FIXTURE - HINGE | 1 | |
| 1C8031G03 | FILXTURE HINGE | 1 | |
| 1C8031G05 | Fixture, Hinge - Upper Compressor Case | 1 | |
| 1C8032G01 | Fixture, Hinge - Low Pressure Turbine Stator Case | 1 | |
| 1C8032G03 | FIXTURE, HINGE - LOW PRESSURE TURBINE STATOR CASE | 1 | |
| 1C8343 | FIXT HINGE COMP STATOR CASES | 1 | |
| 1C9400 | FIXTURE SET, RAISE & HINGE- UPPER COMPR CASE | 1 | |
| 1C9400G01 | Fixture set raise and hinge upper compressor case | 1 | |
| 1C9400P05 | Forward Hinge Part A | 1 | |
| 1C9400P06 | Forward Hinge Part B | 1 | |
| 1C9400P07 | Aft Hinge Part A | 1 | |
| 1C9400P08 | Aft Hinge Part B | 1 | |
| 2215659-1 | HINGE – DIFFUSER | 1 | |
| 2302/90.13 | 2302/90.13;Spare hinge | 1 | |
| 2370203-001 | HINGE REPLACEMENT TOOL | 1 | |
| 25-8Y109-1A | EXTRACTOR/INSERTER TOOL (FOR HINGE BOLTS) | 4 | |
| 269T9259 | Micrometer Lead Lag & Flapping Hinge | 1 | |
| 269T9308-001 | Wrench, Assembly For Flapping Hinge | 2 | |
| 269T9308-001P | WENCH, ASSEMBLY FOR FLAPPING HINGE | 1 | |
| 269T9308-1 | WENCH, ASSEMBLY FOR FLAPPING HINGE | 1 | |
| 269T9310 | Micrometer Flat Hinge | 2 | |
| 28-0-1352 | PIN-HINGE MOUNTING, HORIZONTAL STABILIZER | 1 | |
| 28-0-2327D | PULLER-MAIN GEAR HINGE PIN | 1 | |
| 293353-1 | Hinge Pin Driver Set | 1 | |
| 293353-1PM | HINGE PIN DRIVER SET | 1 | |
| 296317-1 | Hinge pin drill fixture | 1 | |
| 296317-1PM | HINGE PIN DRILL FIXTURE | 1 | |
| 2C15618 | FIXTURE, BOND-BLOCKER DOOR HINGES | 1 | |
| 2C15618G01 | FIXTURE, BOND-BLOCKER DOOR HINGES | 1 | |
| 2C15619 | FIXTURE, BOND-BLOCKER DOOR HINGES | 1 | |
| 2C15619G01 | FIXTURE, BOND-BLOCKER DOOR HINGES | 1 | |
| 2MIT63B13349-1 | HORIZONTAL STABILIZER HINGE BEARING – FREE PLAY CHECK TOOL | 5 | |
| 2MIT65B03670 | HORIZ. STAB. HINGE B | 6 | |
| 2MIT65B03670-1 | HORIZONTAL STABILIZER HINGE BOLT AND BEARING REPLACEMENT TOOL KIT | 3 | |
| 2OHME65B00163-5 | HINGE PIN | 1 | |
| 2mit65b03670 | HORIZ. STAB. HINGE BOLT BRG | 6 | |
| 304AHSKA | HINGED HOOK AND PIN WRENCH SET | 1 | |
| 304APSKA | HINGED HOOK AND PIN WRENCH SET | 2 | |
| 315135 | PULLER, HINGE PIN | 1 | |
| 315W1575-1 | HINGE ASSY | 1 | |
| 315W1575-2 | HINGE ASSY | 1 | |
| 315W1575-6 | HINGE ASSY | 1 | |
| 315W1575U1 | HINGE ASSY | 1 | |
| 315W1575U2 | HINGE ASSY | 1 | |
| 315W1575U6 | HINGE ASSY | 1 | |
| 338671-11 | HINGE HALF | 1 | |
| 338671-12 | HINGE HALF | 1 | |
| 3400847-5 | HINGE PIN | 1 | |
| 340559 | HINGE PIN PULLER | 1 | |
| 347-2000-5GSE | PROTECTOR, HINGE BOLT - FAN COWL | 2 | |
| 347-3001-3GSE | PROTECTOR, HINGE BEAM BOLT - THRUST REVERSER | 1 | |
| 35-0588-1 | WING HINGE PIN INSTALLATION TUBING | 2 | |
| 350A93-3312-00 | T/R HINGE BEARINGS | 1 | |
| 350A93-3313-00 | T/R HINGE BEARINGS | 1 | |
| 351-2100-16GSE | FAN COWL HINGE BOLT THREAD PROTECTORS | 4 | |
| 351-3000-08GSE | THRUST REVERSER HINGE BOLT THREAD PROTECTORS | 1 | |
| 5668 | 3/4" DRIVE HINGE HANDLE 20" | 1 | |
| 36016 | 36016;Hinge;Antenna | 1 | |
| 365A57118120Z | HINGE YOKE | 1 | |
| 388408-3 | HINGE LOWER AFT LEADING EDGE | 1 | |
| 3G5213A02431 | LEFT UP FWD HINGER TROLLEY ASSY | 1 | |
| 3MIT315A1001 | ROD HINGE ALIGNMENT | 1 | |
| 4-023120 | HINGE PIN | 1 | |
| 4115703 | PIN COVER EXHAUST NOZZLE SEAL HINGE | 1 | |
| 4916774 | PULLER - MLG DOOR HINGE PIN | 1 | |
| 460002675 | F100 EXTRACTOR HINGE PIN | 1 | |
| 4916774-1 | MAIN GEAR DOOR HINGE PIN PULLER | 3 | |
| 4936855-1 | N/G DRAG LINK HINGE NUT ADAPTER | 3 | |
| 53-6033 | NLG HINGE FITTING KIT TOOL | 1 | |
| 558-1-05992 | TOOL FLATTENING HINGE PIN | 1 | |
| 58AA1020 | COVER STOP HINGE | 1 | |
| 595266-1 | FLAP HINGE BOLT PULLER | 1 | |
| 5952666-1 | PULLER FLAP HINGE | 7 | |
| 5952666-9 | FLAP HINGE BOLT PULLER {ADAPTOR} | 1 | |
| 5965683 | FIXTURE - SUPPORT, FWD HINGE BEAM, THRUST RVSR | 1 | |
| 5965683 REV A | FIXTURE - SUPPORT, FWD HINGE BEAM, THRUST RVSR | 1 | |
| 5965683-1 | THUST REV FWD HINGE BEAM SUPP | 1 | |
| 5965683-5 | FIXTURE UPPER FWD L.H. T/R HINGE BEAM SUPPORT | 1 | |
| 5965683-6 | FIXTURE UPPER FWD R.H. T/R HINGE BEAM SUPPORT | 1 | |
| 5ME65-73788-1 | Support - Rudder Hinge | 1 | |
| 5ME65-73788-2 | Support - Elevator Hinge | 1 | |
| 5ME65-73788-3 | Support - Elevator Hinge | 1 | |
| 6200AJ1004A | STAINLESS HINGE | 1 | |
| 636-2000-19GSE | FAN COWL HINGE BOLT THREAD PROTECTORS | 6 | |
| 636-2000_19GSE | FAN COWL HINGE BOLT THREAD PROTECTORS | 6 | |
| 636-3000-9GSE | THRUST REVERSER HINGE BOLT THREAD PROTECTORS | 7 | |
| 636-3000_9GSE | THRUST REVERSER HINGE BOLT THREAD PROTECTORS | 7 | |
| 636-4250-21GSE | PROTECTOR, HINGE BOLT THR | 4 | |
| 636GSE2006-901 | FC HINGE BOLT THREAD PROTECTORS | 3 | |
| 65-44710-7 | CYLINDER ASSY HINGE UPPER | 1 | |
| 65601A4241M000 | PIN-LOCATING FOR THRUST REVERSER COWL HINGE | 1 | |
| 65602A4241M000 | PIN-LOCATING FAN CORE COWL HINGES | 1 | |
| 6798292 | HINGED WRENCH WITH 5/16 BOX END FUE | 3 | |
| 6798292-B | HINGED WRENCH WITH 5/16 BOX END FUEL CONTROL REMOVAL | 1 | |
| 68D110049-1001 | RESTRAINT, BELL CRANK, CANOPY HINGE | 1 | |
| 69-14410 | HORIZ, STAB HINGE PIN KIT | 1 | |
| 6MIT65B03670 | Horizontal stabilizer hinge bearing-free play check tools | 2 | |
| 6PME65B00162-1-12 | HINGE BRACKET | 1 | |
| 6PME65B00162-1-6 | HINGE SUPPORT | 1 | |
| 70700-20222-044 | INLET HINGED SCREEN ASSEMBLY | 1 | |
| 7312218-11 | PIN-HINGE, LAV DOOR | 1 | |
| 7830DB14535-1 | Lug Hinge LH | 1 | |
| 7830DB14535-2 | Lug Hinge RH | 1 | |
| 8-26336A | HINGE KRA2403 | 1 | |
| 8-26836A | HINGED LOCK BAR | 1 | |
| 8-27436A | HINGE KRA2410A LID | 1 | |
| 8-27736A | FRICTION HINGE | 1 | |
| 8-27936A | HINGE KRSC46G | 1 | |
| 845791-3A | SOCKET HINGE | 1 | |
| 846-820-030 | KIT FAN COWL HINGE PIN GUIDES | 1 | |
| 9-LGD | HINGE REPAIR KIT | 1 | |
| 92209-01108-049 | FITTING, HINGE LH (AIRFRAME) | 1 | |
| 92209-01108-051 | FITTING, HINGE R/H | 1 | |
| 92209-01108-052 | FITTING, HINGE L/H | 1 | |
| 94FS494-52-10 | LOCATING TOOL, HINGE LINE UPPER S. | 1 | |
| 98A27108030000 | GUIDE BULLET - ASA HINGE LINE BOLT | 4 | |
| 98A27207507025 | NO4 RUDDER HINGE BEARING TOOLS | 1 | |
| 98A27208442000 | FIXTURE HINGE ARMS SERVOCONTROLS | 3 | |
| 98A27303002000 | CENTERING BULLETS AND PINS - ELEVATOR HINGE PINS | 8 | |
| 98A27407530000 | FIXTURE-HINGE ARMS AND SERVO CONTROLS, RUDDER | 6 | |
| 98A27408018000 | ELEVATOR HINGE BOLTS REPLACEMENT | 5 | |
| 98A27408019000 | SHUR-LOK TOOL SET-ELEVATOR HINGE ARM BOLTS | 1 | |
| 98A27508048000 | SOCKET WRENCH - HINGE BEARING NUT | 1 | |
| 98A27603002202 | TUBE,HINGE | 1 | |
| 98A27603002700 | HINGE-PIN | 1 | |
| 98A27603007101 | HINGE WIDE | 1 | |
| 98A27603007102 | HINGE NARROW | 1 | |
| 98A27603008101 | HINGE WIDE | 1 | |
| 98A27603008102 | HINGE NARROW | 1 | |
| 98A32301015000 | EXTRACTOR-HINGE PIN-ACTUATING CYLINDER AIRCRAFT STRUCT | 6 | |
| 98A32303001000 | EXTRACTOR-HINGE BOLT,ACTUATING CYLINDER,MAIN DOOR,N.G | 7 | |
| 98A52208001001 | TOOL , R/I - CARGO COMPT , DOOR HINGE BOLTS | 13 | |
| 98A522307598000 | EXTRACTOR-HINGE PINS, B.CARGO | 1 | |
| 98A52307598 | EXTRACTOR - HINGE PINS, BULK CARGO COMPARTMENT DOOR | 1 | |
| 98A52307598000 | EXTRACTOR - HINGE PINS, BULK CARGO COMPARTMENT DOOR | 8 | |
| 98A55307626300 | MILLING AND CRIMPING DEVICE BEARING 2.3.4 HINGE | 1 | |
| 98A57304002022 | HINGE BLOCK | 1 | |
| 98A71103503000 | LOCATING PIN-FAN CORE COWL HINGES | 1 | |
| 98D27104000000 | AILERON HINGE PIN GUIDE CONE | 7 | |
| 98D27104000001 | BULLET AILERON HINGE PIN | 19 | |
| 98D27104004000 | DUMMY BOLT AILERON HINGE PIN | 16 | |
| 98D27309004000 | CENTRE ELEVATOR HINGE PIN TOOL | 22 | |
| 98D27309012-00 | HINGE FITTING REAMER SET | 1 | |
| 98D27309012-000 | HINGE FITTING REAMER SET | 7 | |
| 98D27309012000 | HINGE FITNG REAMER SET | 7 | |
| 98D27407505000 | (EXTRACTOR STAB HINGE BUSH) | 10 | |
| 98D52003006000 | HOLDIND-REPLACE FITTING HINGE | 1 | |
| 98D52303000000 | TOOL-INSTALLATION FWD CARGO DOOR HINGE | 1 | |
| 98D52307523000 | EXTRACTOR-HINGE PINS,CARGO DOOR | 8 | |
| 98D52307523001 | EXTRACTOR-HINGE PINS,CARGO DOOR | 11 | |
| 98D52307523100 | TOOL-R/I HINGE PINS,CARGO DOOR | 1 | |
| 98D52307523200 | TOOL-R/I HINGE PINS,CARGO DOOR | 1 | |
| 98D52809001000 | REPLACE HINGE FITTING | 1 | |
| 98D53403001000 | MLGD HINGE FITTING | 1 | |
| 98D54003007000 | A320 CFACFBCFChinges cover replacement and control tool | 2 | |
| 98D54003007001 | A321 CFDhinges cover replacement and control tool | 2 | |
| 98D54003007002 | A320/A321 1AA1AB hinges cover replacement and control tool | 1 | |
| 98D54003007003 | A340 1Ahinges cover replacement and control tool | 1 | |
| 98D55109009000 | SOCKET THS REAR SUPP HINGE BEARING | 12 | |
| 98D55308901000 | HINGE HOLE TRANSFER BR1,2,5 | 4 | |
| 98D55308902000 | HINGE HOLE TRANSFER BR3,4 | 3 | |
| 98D55308903000 | HINGE HOLE TRANSFER BR7 | 3 | |
| 98D56003001000 | AILERON/FUSELAGE HINGE PRESSURE APPLY TOOL | 4 | |
| 98D56103003000 | RUDDER/FUSELAGE HINGE PRESSURE APPLY TOOL | 19 | |
| 98D71203001001 | SPOILER HINGE WEIGHT SUPPORT TOOL | 25 | |
| 98D71203500211 | HINGE PIN | 1 | |
| 98D71203501205 | CENTRE HINGE CLAMP TOOL | 2 | |
| 98D71203501211 | HINGE PIN | 6 | |
| 98D71203501230 | HINGE PIN | 8 | |
| 98D71203501300 | FWD HINGE ARM | 2 | |
| 98D71203501308 | CENTRE HINGE CLAMP | 2 | |
| 98D71203501318 | HINGE PIN | 9 | |
| 98DNSA20206040 | HINGE PIN | 15 | |
| 98F32104013206 | HINGE PIN | 4 | |
| 98F32201001000 | NLG Door Hinge Bullet | 12 | |
| 98F32301028000 | SPANNER - HINGED DOOR NUT, CLG | 1 | |
| 98F52003005000 | REAR-NLG DOOR HINGE REPAIR | 2 | |
| 98K7110H006-000 | FCD HINGE BOLT PROTECTION EIS | 1 | |
| 98K7830H022-000 | THRUST REVERSER HINGE BOLT PROTECTION (EIS)- RO PROTECT BOLTS IF REQ | 1 | |
| 98L27003000132 | CHARNIERE GUIDE-CABLE HINGE FAIRLEAD | 1 | |
| 98L32104015206 | PIN HINGE | 1 | |
| 98L32201005000 | EXTRACTOR,HINGE PIN,NLG LEG | 3 | |
| 98L53809015000 | Hinge Line Alingment | 1 | |
| 98L53809020_Iss_1 | POS TOOL HINGE FITTING 1 | 1 | |
| 98L55109009000 | INSTALL - HINGE PIN | 1 | |
| 98L57703001000 | TOOL SET,HINGE BEARING | 1 | |
| 98L7110H011-001 | PROTECTION BULLETS-FC HINGE BOLTS | 1 | |
| 98L7110H018-000 | BULLETS, PROTECTION - FC HINGE BOLTS | 1 | |
| 98L7110H018-001 | PROTECTION BULLETS-FAN COWL HINGE BOLTS | 1 | |
| 98L7830H006-000 | PROTECTION BULLETS-FEC/TR HINGE BOLTS | 1 | |
| 98L7830H006-001 | PROTECTION BULLETS-FEC/TR HINGE BOLTS | 1 | |
| 98L7830H038-001 | BULLETS-PROTECTION, TR-FEC HINGE BOLTS | 1 | |
| 98N7830H014-000 | THRUST REVERSER HINGE BOLT BULLET | 1 | |
| 98N7830H028-00 | THRUST REVERSER HINGE BOLT BULLETS | 1 | |
| 98N7830H028-000 | HINGE BOLT | 3 | |
| 98S52305001000 | Hinge Cargo Door Replacemt | 3 | |
| 98S52305001000-REVC | HINGE CARGO DOOR REPLACEMENT TOOL | 1 | |
| 98S52305008000 | CARGO DOOR SKIN UNDER PIANO HINGE | 1 | |
| 98S52305008200 | Cargo Door Skin Hinge Cal. | 2 | |
| 98V32109004000 | HINGE 2 GREASING, MLGD | 1 | |
| 98a32303001000 | EXTRACTOR-HINGE BOLT,ACTUATING CYLINDER,MAIN DOOR | 7 | |
| 999-3001-3GSE | THRUST REVERSER HINGE BOLT THREAD PROTECTOR SET | 1 | |
| 99A53107287000 | AIRBUS REFERENCE STANDARD (CARGO DOOR HINGES) | 7 | |
| A11088 | NLG HINGE PIN PULLER | 1 | |
| A20004-2 | HINGE ASSY | 2 | |
| A20008 | THRUST REVERSER HINGE BEARING INST | 1 | |
| A20008-1 | HINGE BEARING | 11 | |
| A318-92010-0001 | FITTING ASSY-HINGE ALIGNMENT TOOL | 1 | |
| A318-92010-0002 | FITTING ASSY-HINGE ALIGNMENT TOOL | 1 | |
| A32005-9 | Hinge Block | 1 | |
| A32019-13 | Driver set-hinge pins，large cargo door | 1 | |
| A330520001 | BULLET-BULK CARGO DOOR HINGE PIN | 1 | |
| A340-92010-0001 | FITTING ASSY-HINGE ALINGMENT TOOL | 1 | |
| A340-92010-0002 | FITTING ASSY-HINGE ALINGMENT TOOL | 1 | |
| A417AF002WB | CABIN HINGE DOOR WINDOW FILLER WEDGES LENGTH 300 CM | 1 | |
| A417AG002WB | COKCPIT HINGE DOOR WINDOW SEAL 300 CM | 1 | |
| A49001-125 | HINGE FITTING | 1 | |
| A52019 | DRIVER SET HINGE PINS LARGE CARGO DOOR | 1 | |
| A52019-1 | DRIVER SET - HINGE PIN, LARGE CARGO DOOR | 14 | |
| A52019-10 | HINGE SET | 1 | |
| A52019-13 | DRIVER SET - HINGE PINS, LARGE CARGO DOOR | 8 | |
| A52019-9 | HINGE PIN | 1 | |
| A52035 | DRIVER EQPT INTMD HINGE PINS MAIN DECK CARGO DOOR | 1 | |
| A52035-1 | DRIVER EQUIPMENT - INTERMEDIATE HINGE PINS, MAIN DECK CARGO DOOR | 3 | |
| A54004 | JACKING EQPT – HINGE, HORIZ STAB | 1 | |
| A55002 | WRENCH RETAINER NUT BUSHING ELEVATOR HINGE | 1 | |
| A55002-1 | WRENCH - RETAINER NUT, BUSHING, ELEVATOR HINGE | 1 | |
| A55003 | ALIGNMENT EQPT HINGE INBOARD ELEVATOR | 1 | |
| A55003-1 | ALIGNMENT EQUIPMENT - HINGE, INBOARD ELEVATOR | 1 | |
| A55004 | JACKING EQUIPMENT-HINGE,HORIZONTAL STABILIZER | 1 | |
| A55004-123 | JACKING EQPT-HINGE HOR. STAB | 2 | |
| A55004-73 | JACKING EQUIPT- HINGE, HORIZ. STABILISER | 1 | |
| A55004-82 | HINGEJACKING EQUIP | 1 | |
| A55004-98 | JACKING EQUIPMENT - HINGE, HORIZONTAL STABILIZER | 9 | |
| A78011-13 | AFT CENTER HINGE ASSY | 1 | |
| A78011-14 | FWD HINGE ASSY | 1 | |
| A78011-72 | AFT HINGE | 1 | |
| A78011-73 | CENTER HINGE | 1 | |
| A78011-74 | FWD HINGE | 1 | |
| A78011-75 | AFT HINGE | 1 | |
| A78011-76 | CENTER HINGE | 1 | |
| A78011-77 | FWD HINGE | 1 | |
| A78015-1 | REWORK JIG - HINGE, BLOCKER DOORS, THRUST REVERSER (PRATT AND WHITNEY) | 3 | |
| AF-5098/.875 | FLAP HINGE FITTING PROBE .875" OD DIFF TRIAX FISCHER CONN 50-500KHZ | 1 | |
| AFS-1302 | CUSTOM LOW PROFILE 7.5MHz ANGLE BEAM TRANSDUCER WITH HANDLE. USED TO INSPECT THE CHORD DOUBLER AT THE HINGE BEAM TO LATCH BEAM END FOR THE B777 AIRCRAFT. | 1 | |
| AFS-1302L | CUSTOM LOW PROFILE 7.5MHz ANGLE BEAM TRANSDUCER WITH AN ANGLED HANDLE. USED TO INSPECT THE FIRST 3.5 inches of the HINGE BEAM END FOR THE B777 AIRCRAFT. LEFT SIDE SCANNING | 1 | |
| AFS-1302R | CUSTOM LOW PROFILE 7.5MHz ANGLE BEAM TRANSDUCER WITH AN ANGLED HANDLE. USED TO INSPECT THE FIRST 3.5 inches of the HINGE BEAM END FOR THE B777 AIRCRAFT. RIGHT SIDE SCANNING | 1 | |
| AGE-00834-401 | PULLER - HINGE PIN, STABILIZER | 5 | |
| AGE-02119-001 | HINGE BRACKET | 1 | |
| APV7113-00-0 | BULLETS-FAN COWL HINGE BOLTS | 1 | |
| APV7113-00-0 | FAN COWL DOOR HINGE BOLT BULLET iss B | 1 | |
| APV7113-00-0 REV B | FAN COWL DOOR HINGE BOLT BULLET | 1 | |
| APV7113-00-0G | HINGE BOLT BULLETS | 1 | |
| APV7860-01-0 | T/R HINGE BOLT BULLET iss E | 3 | |
| APV7860-01-0 REV E | T/R HINGE BOLT BULLET | 1 | |
| ASK4102-10DP | TOOL KIT FOR REPLACEMENT OF AILERON HINGE FITTING | 1 | |
| AT-HU87127 | INGTALLATION/EXTRACTION TOOL, HINGE PIN 2 | 1 | |
| ATC1400A | SVM HINGE NN++ 6 | 6 | |
| AZL04224-R00 | RUDDER HINGE FITTING JIG TOOL | 1 | |
| B12006 | ADAPTER -0 LUBRICATION, SPOILER OUTER HINGE LINK | 1 | |
| B12006-1 | ADAPTER - LUBRICATION, SPOILER OUTER HINGE LINK ASSEMBLY | 15 | |
| B27069 | ELE HINGE BEARING RET. NUT TOOL | 1 | |
| B27072-1 | ADPAT- LUB. SPOLIER OUTER HINGE LINK ASSY | 3 | |
| B36007-24 | HINGE BRACKET AFT | 1 | |
| B36007-25 | HINGE BRACKET AFT | 1 | |
| B36007-26 | HINGE BRACKET FWD | 1 | |
| B36007-27 | HINGE BRACKET FWD | 1 | |
| B36007-6 | Hinge bracket FWD assy | 1 | |
| B49002-23 | HINGE ASSY | 1 | |
| B49002-24 | HINGE ASSY | 1 | |
| B49002-25 | HINGE -0 OPP -24 | 1 | |
| B49002-43 | HINGE PIN | 1 | |
| B49002-44 | HINGE PIN | 1 | |
| B52023 | SPANNER WRENCH, HINGE NUT, #1, 2 & 4 DOORS | 1 | |
| B52023-1 | SPANNER WRENCH, HINGE NUT, NUMBER 1, 2 AND 4 DOORS | 5 | |
| B52023-2 | PAX DOOR HINGE NUT SPANNER TOOL | 2 | |
| B52023-5 | SPANNER WRENCH, HINGE NUT, NUMBER 1, 2 AND 4 DOORS | 1 | |
| B52023-8 | SPANNER WRENCH, HINGE NUT, NUMBER 1, 2 AND 4 DOORS | 3 | |
| B55002-25 | HORIZONTAL STAB HINGE DEARING TOOL SET | 1 | |
| B55003 | TOOL SET -0 HORIZ. STAB. HINGE BEARING | 1 | |
| B55003-1 | HOZ STAB HINGE BEARING TOOL | 1 | |
| B55003-21 | TOOL SET-HORIZ.STAB.HINGE BEARING | 1 | |
| B55003-27 | TOOL SET - HORIZONTAL STABILIZER HINGE BEARING | 7 | |
| B737 HORZ. STAB HINGE PIN | HORZ. STAB HINGE "DUMMY PINS" | 1 | |
| B7675500-7 | SOCKET, ELEV HINGE BEAR'G RETAIN'G NUT | 1 | |
| BB12-207C | REF STD, MD80 HORZ STAB PIVOT HINGE KIT | 1 | |
| BB750 | HINGE,BUTT / BUCKING BAR 1.25 LB | 1 | |
| BK5700-9 | KIT KICKSTAND HINGE REAR LABEL | 1 | |
| BTA-M4-7 | EXTRACTOR-R/I PIVOT DOOR HINGE PINS | 2 | |
| C21005-12 | HINGE ROD | 1 | |
| C27039-1 | Spanner Wrench - Hinge Bearing, Horizontal Stabilizer | 11 | |
| C27049-24 | HINGE PLATE | 1 | |
| C27049-25 | HINGE PLATE | 1 | |
| C27050-26 | HINGE GUSSET | 1 | |
| C27051-12 | HINGE CLEVIS | 1 | |
| C27051-17 | HINGE FITTING | 1 | |
| C27054-1 | Thread Protector Set - Horizontal Stabilizer Hinge Pin | 10 | |
| C27109 | OFFSET WRENCH KIT - HINGE FITTING, HORIZONTAL STABILIZER | 1 | |
| C27109-1 | OFFSET WRENCH KIT - HINGE FITTING, HORIZONTAL STABILIZER | 2 | |
| C32034-97 | CYLINDER HINGE BLOCK | 1 | |
| C32034-98 | Hinge Plate | 1 | |
| C342131-4 | MALE BUSTLE HINGE RH | 1 | |
| C49010-10 | CLAMP HINGE | 1 | |
| C52002-37 | HINGE ARM ASSY | 1 | |
| C52002-38 | HINGE ARM ASSY | 1 | |
| C52002-39 | HINGE ARM ASSY | 1 | |
| C52006-78 | HINGE ASSY | 1 | |
| C52006-79 | HINGE ASSY | 1 | |
| C52006-82 | LOWER HINGE ASSY | 1 | |
| C52015-1 | ASSEMBLY JIG - HINGES, NOSE LANDING GEAR DOOR | 1 | |
| C52015-2 | ASSEMBLY JIG - HINGES, NOSE LANDING GEAR DOOR | 1 | |
| C54014-1 | Bearing Replacement Eqpt - Tr Hinge | 6 | |
| C54015 | SPANNER WRENCH THRUST REVERSER HINGE FITTING | 1 | |
| C54015-1 | Spanner Wrench - Thrust Reverser Hinge Fitting | 16 | |
| C55001-7 | Adapter-Elevator Hinge Ftg | 1 | |
| C55001-8 | ADAPTER,ELEV HINGE FTG | 1 | |
| C55002-1 | Punch Set - Horizontal Stabilizer Center Section Hinge Pin Removal | 18 | |
| C57001-1 | ROLLER SWAGING EQUIPMENT - HINGE BRACKET | 4 | |
| C78014 | Hinge Wrench Set | 1 | |
| C78014-6 | THRUST REVERSER HINGE WRENCH SET | 15 | |
| C78014-7 | FOR R. H. HINGE | 1 | |
| C78014-8 | FOR L. H. HINGE | 1 | |
| C78014-9 | WRENCH - CFM56-3 THRUST REVERSER HINGE | 5 | |
| C78015-1 | ROD ALIGN HINGE T/R | 8 | |
| C78018-28 | FWD HINGE FTG | 1 | |
| C78018-31 | AFT HINGE FTG | 1 | |
| C78018-51 | Aft Hinge Fitting Assy | 3 | |
| C78018-6 | FWD HINGE FTG | 8 | |
| C78018-62 | Aft Hinge Fitting | 3 | |
| C78018-7 | AFT HINGE FTG | 1 | |
| C78048-6 | FWD HINGE FITTING ASSY | 1 | |
| CAT5824-5 | TRAILING ARM HINGE PIN TOOL | 2 | |
| CAT5824−5 | TRAILING ARM HINGE PIN TOOL | 2 | |
| CDKG90-121 | KIT - TOILET HINGE AND SEAT REPL. | 1 | |
| CF65B05501 | FIXTURE ASSEMBLY - RUDDERS HINGE ALIGNMENT | 1 | |
| CF65B05501-1 | BRACKET ASSY - HINGE ALIGNMENT, RUDDERS | 1 | |
| CF65B05501-2 | PIN - (0.750 INCH DIA) HINGE ALIGNMENT, RUDDERS | 1 | |
| CF65B05501-3 | PIN - (0.315 INCH DIA) HINGE ALIGNMENT, RUDDERS | 1 | |
| CF65B05700 | FIXTURE ASSEMBLY - HINGE ALIGNMENT, ELEVATORS | 1 | |
| CF65B05700-1 | BRACKET ASSY - HINGE ALIGNMENT, ELEVATORS | 1 | |
| CF65B05700-2 | PIN - HINGE ALIGNMENT, ELEVATORS | 1 | |
| CG9000055-0001 | Flap Hinge Bushing Tooling | 1 | |
| CS-318-48300 | Bullets Fan Cowl/Hinge Bolts | 1 | |
| CS-710-118 | HINGE PIN 1 EA ( ALT P/N : 611855 ) WRENCH SIZE ; 35-50 MM | 1 | |
| CS710-150 | TOOL, HINGE-PIN | 1 | |
| CTE1518PE001 | KIT ASS'Y, PROTECTIVE GUIDE - RUDDER HINGE PINS | 1 | |
| CTLFD761-20 | ALUM HOUSE W/HINGE AND SCREWS | 1 | |
| D15473-427 | HINGE ASSY | 1 | |
| D15473-428 | HINGE ASSY | 1 | |
| D2511114200000 | MOUNT ASSY HINGE | 1 | |
| D5285875200000A | DOOR ASSY-HINGED FAIRING (LH) | 1 | |
| DHS108 | DOOR HINGE REMOVAL SET | 1 | |
| DHW1 | DOOR HINGE BIT WRENCH | 1 | |
| DJ69-31158-1 | DRILL JIG HINGE FITTING ASSY | 1 | |
| DOOR-HINGE-REAMER | DOOR HINGE REAMER TOOL | 1 | |
| DZZ0023-1 | WRENCH FITTING HINGE AILERON | 2 | |
| DZZ0023-501 | WRECH FITTING HINGE | 1 | |
| DZZ0023-503 | WRENCH FITTING HINGE | 2 | |
| DZZ0023-505 | WRECH FITTING HINGE | 1 | |
| DZZ7090-501 | PULLER, STAB MAIN HINGE | 1 | |
| DZZ7230-1 | CGO DOOR HINGE PIN PULLER ADAPTER | 2 | |
| DZZ7230-501 | ADAPTER HINGE PULLER | 1 | |
| DZZ7230-503 | ADAPTER HINGE DOOR C | 1 | |
| DZZ7231-1 | CGO DOOR HINGE PIN GUIDE | 1 | |
| DZZ7231-501 | Guide-hinge pin | 1 | |
| DZZ7232-1 | CGO DOOR HINGE RIGGING SET | 1 | |
| DZZ7232-3.31 | CGO DOOR HINGE RIGGING BAR | 1 | |
| DZZ7294-17 | HINGE PIN | 1 | |
| ECARA-5 | ROTATION HINGE | 1 | |
| ECARB-18 | HINGE COVER W/4PCSCRW 2.5/15MM | 1 | |
| ECARE068-11 | TPU HINGE | 1 | |
| ECARG068-11 | ROTATABLE HINGE | 1 | |
| ECFSLIMDLX-9 | HINGE ASSEMBLY | 1 | |
| ECPRA072-A | ROTATION HINGE | 1 | |
| ELEVHINGE-ARM-TOOL | ELEVATOR HINGE ARM TOOL | 1 | |
| EP48300 | Hinge Bolts Protection | 2 | |
| EP483002 | THREADED PROTECTOR - FAN COWL HINGE BOLTS | 1 | |
| ESP-001 | CANOPY COVER w/ fwd extension to cover hinges | 1 | |
| ESP-810 | TRAVEL COVER, Light Weight Canopy Cover w/ fwd extension to cover hinges | 1 | |
| ETD:GPO-0253/2018 | EMB-314500142_FAE-1014 – RUDDER TRIM TAB HINGE INSPECTION | 1 | |
| EX601R47015-001 | CALIBRATION REFERENCE STANDARD - PIANO HINGE PASSENGER DOOR (BOMBARDIER INC.) | 1 | |
| EX601R47015−001 | Calibration reference standard − piano hinge passenger door (Bombardier Inc.) | 1 | |
| EXSH670-31022-1 | NDT CALIBRATION, UPPER HINGE AND LATCH BEAM TEST PIECE (MHIRJ) | 1 | |
| EXSH670-31022−1 | NDT CALIBRATION UPPER HINGE AND LATCH BEAM TEST PIECE (BOMBARDIER INC.) | 1 | |
| EXSH670−31022−1 | NDT calibration upper hinge and latch beam test piece (Bombardier Inc.) | 1 | |
| F21861 | NLG HINGE PULLER | 2 | |
| F27579000 | UPPER BRACE AXLE HINGE REMOVAL TOOL | 1 | |
| F28355000 | EXTRACTR EXTRACTOR-HINGE PIN | 1 | |
| F46174 | HINGE PIN PULLER | 1 | |
| F46175 | HINGE PIN GUIDE | 1 | |
| F50B955604 | TOOL SET FOR STABILIZER HINGE FITTINGS NDT | 1 | |
| F532-R1060-000L9410-01 | GAUGE FOR HINGE MDCD A330PTOF | 1 | |
| F70086 | PULLER KIT -0 GALLEY AND ENTRY DOOR HINGE USED | 1 | |
| F70158-505 | HINGE PULLER TOOL | 2 | |
| F70293 | PULLER SET -0 FILLET FLAP HINGE PINS PROVIDE | 1 | |
| F70293-1 | Puller set-fillet flap hinge pins | 1 | |
| F70330-14 | hINGE SUPPORT | 2 | |
| F70330-15 | SUPPORT RUDDER HINGE QTY 3 | 3 | |
| F70330-15-M | HINGE SUPPORT | 1 | |
| F70330-17 | ADJUST HINGE SUPPORT | 2 | |
| F70330-21 | HINGE SUPPORT ASSY | 5 | |
| F70330-3 | HINGE SUPPORT | 10 | |
| F70335-1 | Line Reaming Tool Set - Entry Door Hinge, Support Fitting | 4 | |
| F70355-1 | DOOR HINGE SUPPORT FITTING | 1 | |
| F71135 | PULLER ASSY -0 HORIZ. STAB. HINGE PIN TO INSTALL | 1 | |
| F72757 | PULLER -0 STAB. HINGE PIN AND BUSHING USED TO | 6 | |
| F72925 | WRENCH-SET -0 BEARING NUT FIN STAB.HINGE USED TO | 1 | |
| F72925-1 | KIT WRENCH HINGE STA | 2 | |
| F72925-2 | KIT WRENCH HINGE STA | 2 | |
| F72925-3 | KIT WRENCH HINGE STA | 1 | |
| F72925-4 | KIT WRENCH HINGE STA | 1 | |
| F7672700-39 | SPANNER SET-SPOILER HINGE BOLT | 1 | |
| F7XC205706201 | GREASING TOOL FOR 15MM-DIA BEARING (AILERON HINGES 1 2) | 1 | |
| F7XC205706202 | GREASING TOOL FOR 18MM-DIA BEARING (AILERON UPPER INBD HINGE 3) | 1 | |
| F7XC205706203 | GREASING TOOL FOR 15MM-DIA BEARING (AILERON LOWER HINGE 3) | 1 | |
| F7XC205706204 | GREASING TOOL FOR 18MM-DIA BEARING (AILERON UPPER OUTBD HINGE3) | 1 | |
| F80040-10 | HINGE LUG | 1 | |
| F80040-12 | HINGE PLATE | 1 | |
| F80046-1 | THREAD PROTECTOR CENTER SECT HORIZONTAL STAB HINGE PIN INSTALL | 1 | |
| F80047 | REM TOOL ASSY- HORIZ STAB HINGE PIN | 1 | |
| F80047-1 | Tool Assembly -Removal. Horizontal Stabilizer Hinge Pin | 10 | |
| F80157-1 | Wrench -Aft Airstairs Handrail Hinge Pin | 1 | |
| F80183-1 | Thread Protector-Center Sec, Horiz Stab Hinge Pin | 14 | |
| F80253-1 | Spanner Wrench -Hinge Bearing. Horizontal Stabilizer | 2 | |
| FAT-10-235-41000 | HINGE PIN REMOVAL TOOL | 1 | |
| G24004-37 | HINGE EAR | 1 | |
| G24004-48 | HINGE EAR | 1 | |
| G27001-1 | USED AS A LOCK BETWEEN THE ACTUATOR AND THE SPOILER HINGE FITTING TO HOLD SPOILER OPEN AGAINST SYSTEM PRESSURE DURING MAINTENANCERIGGING. | 11 | |
| G27002-1 | USED AS A LOCK BETWEEN THE ACTUATOR AND THE SPOILER HINGE FITTING TO HOLD SPOILER OPEN AGAINST SYSTEM PRESSURE DURING MAINTENANCERIGGING. | 10 | |
| G27036 | MEASURING EQPT -0 HORIZ STAB HINGE BEARING | 1 | |
| G27036-143 | MEASURING EQUIPMENT - HORIZONTAL STABILIZER HINGE BEARING FREE PLAY | 2 | |
| G27036-143 repair | Measuring eqpt-Joriz stab hinge bearing freeplay | 1 | |
| G27036-143-loading test/ inspection/ calibration | Measuring eqpt-Joriz stab hinge bearing freeplay | 1 | |
| G27036-186 | MEASURING EQUIPMENT - HORIZONTAL STABILIZER HINGE BEARING FREE PLAY | 6 | |
| G27036-186-loading test/ inspection/ calibration | Measuring eqpt-Joriz stab hinge bearing freeplay | 1 | |
| G27036-74 | MEASURING EQUIPMENT - HORIZONTAL STABILIZER HINGE BEARING FREE PLAY | 5 | |
| G27036-75 | MEASURING EQUIPMENT - HORIZONTAL STABILIZER HINGE BEARING FREE PLAY | 1 | |
| G27093-1 | LOCATING PIN - HINGE, OUTBOARD AILERON | 1 | |
| G27104-1 | REMOVAL/INSTALLATION EQUIPMENT - VARIABLE CAMBER FLAP PANEL HINGE FASTENERS | 1 | |
| G51004-1 | HINGE SUPPORTS | 1 | |
| G52005 | WRENCH -0 AIRSTAIR HINGE ASSY NUT | 1 | |
| G52030 | PIN -0 MAINTENANCE, SWING ZONE DOOR, MAIN HINGE | 1 | |
| G52030-1 | MAINTENANCE PIN - SWINGZONE DOOR HINGE PIN, INSPECTION | 1 | |
| G52032-1 | REMOVAL EQUIPMENT - HINGE PINS, MAIN CARGO DOOR | 1 | |
| G670-521104-101 | GAUGE, NO-GO, PAX DOOR HINGE | 1 | |
| G670-521104−101 | PAX DOOR HINGE NO-GO GAUGE | 1 | |
| G670−521104−101 | Pax Door Hinge NO−GO Gauge | 1 | |
| G71001-153 | LWR HINGE BRKT | 1 | |
| G71001-159 | UPPER HINGED BRACKET | 1 | |
| G78005-82 | FWD HINGE ASSY | 1 | |
| G78005-83 | AFT HINGE ASSY | 1 | |
| GA295 | HINGED MIRROR | 4 | |
| GA51B | MIRROR, HINGED RECTA | 4 | |
| GA53A | MIRROR, HINGED RECTA | 1 | |
| GA7463-3 | SNUBBER-RADOME HINGE ROTARY | 1 | |
| GS48251 | TOOL KIT (TO REMOVE HINGE ARM/BARREL PIN MLG) | 1 | |
| GS4975 | HINGED CLIP | 1 | |
| GSE 579 | HINGE STABILIZER, ASSY | 1 | |
| GSE271 | PULLER-HINGE PIN, STABILIZER | 1 | |
| H21968 | EXTRACTOR-HINGE PIN | 12 | |
| H2340-1 | HINGE ASSY | 2 | |
| H46839 | PIN-POS HINGE PIN & SEATING BUSH | 7 | |
| H6100K2186 | HINGE AY | 1 | |
| HC130H0042-000 | Extractor - bush lift spoiler hinges | 2 | |
| HC130H0117-000 | Adaptor - torque loading MLG door hinge | 3 | |
| HC130H0118-000 | Adaptor - torque loading MLG door hinge | 2 | |
| HC5288-0033-000 | MLG HINGE SLAVE BUSH | 1 | |
| HC551B0086-000NDT | TEST PEICE-NO1 HINGE BRACKET (RIB3)ATTACHMENT BOLT | 1 | |
| HC551B0087-000NDT | TEST PEICE-NO2 HINGE BRKT (RIB6) ATTACHMENT BOLT | 1 | |
| HL-1-25W173051 | AILERON MAIN HINGE BEARING EXTRACTOR | 1 | |
| HU87109 | EXTRACTOR EXTRACTOR -0 N 5 HINGE PIN REM. | 1 | |
| HU87111-2 | EXTRACTOR-R/I PIVOT DOOR HINGE PINS | 7 | |
| HU87119 | EXTRACTOR-BRIDGE, R/I PIVOT DOOR HINGE PINS | 8 | |
| HU87120 | EXTRACTOR-BRIDGE, R/I PIVOT DOOR HINGE PINS | 7 | |
| HU87121-1 | EXTRACTOR - BRIDGE, R/I PIVOT DOOR HINGE PINS | 6 | |
| HU87127 | EXTRACTOR-R/I N.2 HINGE PIN T/R | 9 | |
| HU87128 | EXTRACTOR-R/I N.3/4 HINGE PIN T/R | 10 | |
| HU87129 | EXTRACTOR-R/I N.5 HINGE PIN T/R | 9 | |
| HU87131-1 | EXTRACTOR - REMOVAL OF LOCKWASHER FROM 12 O'CLOCK HINGE PINS. | 13 | |
| HU87533 | TOOLING FOR TR 25K HINGE 5 | 1 | |
| HU88000 | SLING-R I HINGED COWLS | 6 | |
| HU88000-1 | SLING-R I HINGED COWLS | 6 | |
| HU88001 | STAND-PARKING, SHOP TRANSPORT HINGED COWLS | 8 | |
| IAE1N20016 | THREAD PROTECTOR, HINGE SHOULDER BOLT | 4 | |
| J21938 | TOOL-MLG LOWER HINGE PIN | 7 | |
| J27142-1 | Sling-flaperon hinge panel | 1 | |
| J47107 | 9 PIECES SET OF 1/4" HINGE SOCKET | 1 | |
| J51003 | HINGE SUPPORTS | 1 | |
| J51003-59 | HINGE SUPPORT | 3 | |
| J52030-12 | FWD HINGE BLOCK | 1 | |
| J52030-13 | AFT HINGE BLOCK | 1 | |
| J5469 | PROTO 1/2" DRIVE HINGE HANDLE 24" | 1 | |
| J55003-1 | REMOVAL/INSTALLATION EQUIPMENT - HINGE PIN, HORIZONTAL STABILIZER | 8 | |
| J55003-9 | REMOVAL/INSTALLATION EQUIPMENT - HINGE PIN, HORIZONTAL STABILIZER | 9 | |
| J5668BL | 3/4 INCH DRIVE, HINGE HANDLE 20 INCH PROTO | 1 | |
| J57010-1 | Insertion equipment-aft hinge pin,folding wing tip | 2 | |
| J57011-1 | Spline protector-aft hinge pin，polding wing tip，removal and installation | 3 | |
| J57012-1 | Removal/installation equipment-hinge pin,folding wing tip | 3 | |
| J57015 | ALIGNMENT EQUIPMENT - HINGE, FOLDING WING TIP SPL-17802 | 1 | |
| J57015-1 | Alignment equipment-hinge，folding wing tip | 1 | |
| J71015-22 | HINGE ASSY | 1 | |
| J71038-56 | HINGE BLOCK | 1 | |
| J71072-1 | PROTECTOR KIT- HINGE LUG, FAN | 3 | |
| J71072-2 | PROTECTOR KIT - HINGE LUG, FAN | 3 | |
| J71072-3 | PROTECTOR KIT- HINGE LUG, FAN | 1 | |
| J71072-4 | PROTECTOR KIT- HINGE LUG , FAN | 4 | |
| J71072-5 | PROTECTOR KIT- HINGE LUG, FAN | 2 | |
| J78004-115 | HINGE FITTING -0 THRUST | 1 | |
| J78004-116 | HINGE FITTING -0 THRUST | 1 | |
| J78004-117 | HINGE PAD -0 THRUST | 1 | |
| J78004-40 | HINGE PAD -0 THRUST | 1 | |
| J78004-55 | Short hinge attach pin | 1 | |
| J78004-70 | Hinge Pin | 1 | |
| J78004-75 | Sling Equipment - Hinge Fitting | 4 | |
| J78004-76 | Sling Equipment Hinge Fitting Prr | 4 | |
| J78004-77 | AFT HINGE ATTACH FITTING | 1 | |
| J78004-78 | FORWARD HINGE ATTACH FITTING | 1 | |
| J78004-79 | AFT HINGE ATTACH FITTING | 1 | |
| J78004-80 | FORWARD HINGE ATTACH FITTING | 1 | |
| J78004-90 | HINGE FITTINGS-GE90 FAN THRUST | 13 | |
| J78004-93 | AFT HINGE ATTACH FITTING | 1 | |
| J78004-94 | Fwd Hinge Attach Fitting | 1 | |
| J78005-1 | PROTECTOR - THREAD, T/R HINGE BOLT (GE90-115B ENGINE) | 10 | |
| J78005-10 | Protector - Thread, GE90-115B Thrust Reverser Hinge Bolt | 13 | |
| J78005-3 | PROTECTOR - THREAD, THRUST REVERSER HINGE BOLT (RR ENGINE) | 10 | |
| J78019-86 | HINGE ATTACH ASSEMBLY | 1 | |
| J78023-3 | FORWARD HINGE ATTACH ASSEMBLY | 1 | |
| J78023-4 | AFT HINGE ATTACH ASSEMBLY | 1 | |
| J78031-111 | HINGE ATTACH FITTING | 1 | |
| J78031-112 | HINGE ATTACH FITTING | 1 | |
| J78031-87 | fwd hinge attach assy | 1 | |
| J78031-88 | hinge attach assy | 1 | |
| J78047-1 | COLLARS - HINGE LOCK, THRUST REVERSER | 1 | |
| JLS2-A1000PP | JETLINE+ TALL 2 HINGED DOOR BASE UNIT | 1 | |
| K21004-26 | HINGE ASSY | 1 | |
| K27047 | RMVL/INSTALL EQPT-SPOILERS AND FLAPERON HINGE PANELS | 1 | |
| K27047-1 | REMOVAL/INSTALLATION EQUIPMENT - SPOILERS AND FLAPERON HINGE PANELS (CE) | 9 | |
| K27056-63 | Hinge link | 1 | |
| K52036-1 | DRILLING EQUIPMENT - HINGE COLUMN ASSEMBLY, PASSENGER ENTRY DOORS | 1 | |
| K52042 | SPANNER WRENCH-HINGE COLUMN GAS SPRING | 1 | |
| K52042-1 | SPANNER WRENCH - HINGE COLUMN GAS SPRING | 4 | |
| K55003 | REMOVAL/INSTALLATION EQPT -0 HINGE PIN, | 1 | |
| K55003-1 | REMOVAL/INSTALLATION EQUIPMENT - HINGE PIN, HORIZONTAL STABILIZER | 5 | |
| K78001-49 | EQUIPMENT - THRUST REVERSER CHANGE KIT (GENX-1B) - INCLUDES SLING AND HINGE BOLT | 7 | |
| K78001-51 | Aft LH Hinge Fitting Assy | 1 | |
| K78001-52 | Aft RH Hinge Fitting Assy | 1 | |
| K78001-53 | FWD Hinge Fitting Assy | 1 | |
| K78003-100 | EQUIPMENT - THRUST REVERSER CHANGE KIT (RR) - INCLUDES SLING AND HINGE BOLT THREAD PROTECTORS | 8 | |
| K78003-95 | EQUIPMENT - THRUST REVERSER CHANGE KIT (RR) - INCLUDES SLING AND HINGE BOLT THREAD PROTECTORS | 3 | |
| L52B | "T" HANDLE WRENCH(HINGEE) | 2 | |
| LOM236-2490-2310-S | AILERON TAB HINGE BUSHING REAMER 2EA | 1 | |
| M10X75 | HINGE SCREW | 1 | |
| M21818 | TOOL-MLG LOWER HINGE PIN | 9 | |
| M346 SPAR 4 STD-1 | CUSTOM REFERENCE STANDARD, H346 SPAR 4 STD-1 HOLE INTERFACE WITH FLAPS HINGE REWORK. MATERIAL: 7050-T7451 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| M46751 | PIN POS HINGE | 12 | |
| MC0523816-1 | AILERON HINGE (FAA/PMA) | 1 | |
| MC550001-1 | THREAD PROTECTOR AND PUNCHKIT – HORIZONTAL STABILIZER, HINGE PIN REMOVAL | 1 | |
| MCD HINGE SUPPORT (PEMCO) | MCD FWD/AFT HINGE SUPPORT | 1 | |
| MIT 2331028 | HINGE PIN DRIVER | 1 | |
| MIT 2331028-4 | HINGE PIN DRIVE | 1 | |
| MIT012N8549-2 | KIT REWORK C-DUCT HINGE | 4 | |
| MIT182T1300 | TOOL KIT, HINGE FIT | 2 | |
| MIT314T3281-3 | FITTING ASSEMBLY - TOGGLE HINGE, CORE COWL | 1 | |
| MIT65B12349 | THREAD PROTECTOR - HINGE BOLT, NOSE CARGO DOOR | 2 | |
| MIT65B15171 | TORQUE ADAPTER - VARIABLE CAMBER FLAPS HINGE NUT | 3 | |
| MIT65B18301 | PIN SET - RUDDER HINGE ALIGNMENT FIXTURE | 1 | |
| MIT65C25798-13 | MISC TOOL-HINGE FITTINGS | 3 | |
| MIT69B15509 | HINGE PIN PULLER | 2 | |
| MS20253P2 | PIN-HINGE | 1 | |
| NDT3049 | FWD ENTRY DOOR HINGES | 2 | |
| OU190686008 | HINGE FITTING | 1 | |
| P1327 | HINGE BOX SILVER | 1 | |
| PHG111B | HINGE PIN DRIVER .227 DIA | 1 | |
| PHG111B1 | HINGE PIN DRIVER .227 DIA | 1 | |
| PHG112B | HINGE PIN DRIVER .302 DIA | 1 | |
| PHG112B1 | HINGE PIN DRIVER .302 DIA | 1 | |
| PUL5623 | 4" Hinge Plate | 1 | |
| PWA88009 | GUIDE, PROTECT - THRUST REVERSER HINGE PIN | 3 | |
| PWA88064 | PINS, LOCATING - AFT FAN COWL HINGES | 3 | |
| R21819-1000 | TOOL INST LEG STRUCT HINGE | 9 | |
| RB6798292 | Wrench Ground Idle Screw Adjusting (Hinged) | 3 | |
| RB6798292-B | Hinged Wrench With 5/16 Box End Fuel Control Removal | 2 | |
| RBA1600-80902 | Bushing Wrench Tail Rotor Hinge Bolt Same As: 269T9319 | 4 | |
| RBW6205G14251-3G | Hinge Block | 1 | |
| RKKMC18HI | HINGE REPAIR KIT KMC18 | 1 | |
| RKKMC18HIGR | HINGE REPAIR KIT KMC18 GRN | 1 | |
| RSE-3490 | THREADED PROTECTOR-HINGES THRUST REVERSER BOLTS | 6 | |
| RSE1015 | THREAD PROTECTOR, T/R HINGE BOLTS | 4 | |
| RSE1025 | FAN COWL HINGE REPLACEMENT | 4 | |
| RSE1037 | PINS-LOCATING FAN AND CORE COWL HINGES | 4 | |
| RSE1037 REV B | PIN, LOCATING, FAN & COWL DOOR HINGE | 1 | |
| RSE1037-1 | Pins, locating-fan and core cowl hinges | 2 | |
| RSE1037-2 | PIN FOR COWL HINGES | 1 | |
| RSE1037-3 | PIN FOR COWL HINGES | 1 | |
| RSE108-3 | ALIGNMENT TOOL - HINGE FAN COWL ( L/H & R/H) | 1 | |
| RSE1083 | ALIGNMENT TOOL - HINGE FAN COWL ( L/H & R/H) | 1 | |
| RSE1083 REV NC | ALIGNMENT TOOL - HINGE FAN COWL ( L/H & R/H) | 1 | |
| RSE1084 | ALIGNMENT TOOL - HINGE FAN COWL ( L/H & R/H) | 1 | |
| RSE1084 REV NC | ALIGNMENT TOOL - HINGE FAN COWL ( L/H & R/H) | 1 | |
| RSE1162 | SWAGING TOOL INSERT FOR REMOVAL OF C-DUCT HINGE BUSHING (535C AN 535E4 ENGINES) SPL12178 | 3 | |
| RSE1205 | REAMER HINGE FITTING | 2 | |
| RSE1205 REV NC | REAMER HINGE FITTING | 1 | |
| RSE1255 | T/R HINGE BUSHING TOOL | 3 | |
| RSE1620 | TOOL SWAGE HINGE C-D | 1 | |
| RSE3490 | THREADED PROTECTOR-HINGES THRUST REVERSER BOLTS | 6 | |
| RSEI037 | PIN, LOCATING, FAN & COWL DOOR HINGE | 1 | |
| RSEI083 | ALIGNMENT TOOL - HINGE FAN COWL ( L/H & R/H) | 1 | |
| RSEI084 | ALIGNMENT TOOL - HINGE FAN COWL ( L/H & R/H) | 1 | |
| S.141A | HINGED HANDLE | 2 | |
| S.145 | ½ DRIVE HINGED HANDLE | 2 | |
| S.B.737-55-1049 | ELEVATOR BALANCE TAB HINGE | 1 | |
| S488570 | PIN HINGE 6 FOOT PIECE | 1 | |
| S5247143020002 | HALF HINGE | 1 | |
| S5287931200100 | HINGE ASSY - AFT RH SIDE | 1 | |
| S55479000014 | HINGES | 1 | |
| S7020-11001-1-4 | HINGE MOUNT | 1 | |
| S76-906 | CABIN HEATSHIELDS, hinged door models (set of 6) | 1 | |
| SACV11596-200 | HINGE POST UNPAINTED | 5 | |
| SL90.322-.5625 | ELEVATOR HINGE BOLTS REPLACEMENT | 23 | |
| SPL-10289 | ADAPTER LUBRICATION, SPOILER IUTER HINGE | 1 | |
| SPOTFACER35MM | MLG DOOR HINGE FITTING TOOL | 1 | |
| ST1066RB | CABIN DOOR HINGE TOOL | 3 | |
| ST2580-177 | THRUST REV/HINGE BEARING SOCKET WRENCH | 5 | |
| ST897C-C | BLOCK, HINGED, SWAGE TUBE FITTING | 1 | |
| ST925A | STAKING TOOL - HINGE FLAP, FORWARD ENTRY DOOR | 1 | |
| T311A1550 | THRUST REVERSER HINGE FITTING | 1 | |
| TKSS01MIR | HINGED RECTANGLE MIRROR | 1 | |
| TL17796 | Hinge bushing removal/installation NLG aft door | 1 | |
| TMH GA38-00-00-HINGE | CASE HINGE | 1 | |
| TMY-20-55-302-1 | HS HINGE PIN PULLER | 1 | |
| TMY20-55-301 | HINGE PIN PULLER | 2 | |
| TMY20-55-302-1 | PULLER FOR HORIZONTAL STABILIZER HINGE PIN | 1 | |
| TN023771 | DRIVER, HINGE PIN, SPECIAL PUNCH | 2 | |
| TN034379-15 | HINGE PIN DRIVER | 1 | |
| YA6620 | GM DOOR HINGE BUSHING INSTALLR | 1 | |
| 98A27208442000 | FIXTURE HINGE ARMS SERVOCONTROLS,USED TO | 3 | |
| 98A32301015000 | HINGE PIN,NOSE GEAR EXTRACTOR | 6 | |
| 98A52307598000 | HINGE PIN EXTRACTOR,USED TO REMOVAL/INST | 8 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
