| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 01-0574-0000 | HEAD, | 1 | |
| 01-0574-0010 | HEAD, | 3 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 69099 | HEAD HEAD,CRIMPING-DYNA-CRIMP (CALIBRATION) (CALIBRATION) | 1 | |
| 01-0400-0000 | Head, Dash 8-400 (Ce) | 9 | |
| 01-0502-0000 | Head, Hs-125 & Hawker 800 (Ce) | 5 | |
| 01-0503-0000 | Head, Sabreliner (Ce) | 2 | |
| 01-0505-0000 | Head, Falcon 10/20/100/200 (Ce | 1 | |
| 01-0506-0000 | Head, K/Q Air, Sj30-2 (Ce) | 6 | |
| 01-0507-0000 | Head, Merlin Iii/Iv, Metro (Ce | 2 | |
| 01-0508-0000 | Head, Mitsubishi Mu-2 (Ce) | 1 | |
| 01-0511-0000 | Head, Combo (Ce) | 1 | |
| 01-0513-0000 | Head, Twin Otter (Std) (Ce) | 4 | |
| 01-0514-0000 | Head, Fokker F-27 (Ce) | 1 | |
| 01-0515-0000 | Head, Challenger (Ce) | 5 | |
| 01-0516-0000 | Head, Sikorsky S-76 (Ce) | 1 | |
| 01-0517-0000 | Head, Dash 7 (Ce) | 1 | |
| 01-0518-0010 | Head, Shorts Sd330/Sd360 (Ce) | 1 | |
| 01-0520-0010 | Head, Falcon 50/900/2000 (Ce) | 3 | |
| 01-0522-0000 | Head, B/N Islander | 1 | |
| 01-0524-0000 | Head, Agusta 109 (Ce) | 3 | |
| 01-0525-0000 | Head, Bell 222 230 430 (Ce) | 1 | |
| 01-0526-0000 | Head, Jetstream 31 (Ce) | 4 | |
| 01-0529-0000 | Head, Nomad (Ce) | 1 | |
| 01-0531-0000 | Head, Casa 212-100/200 (Ce) | 2 | |
| 01-0532-0000 | Head, Bae Hs 748 (Ce) | 1 | |
| 01-0534-0000 | Head, Dornier 228 (Ce) | 2 | |
| 01-0538-0000 | Head, Caravan (Ce) | 2 | |
| 01-0539-0000 | Head, T-38 (Ce) | 1 | |
| 01-0540-0010 | Head, Emb-120 (Ce) | 2 | |
| 01-0542-0010 | Head, Lear,Cit I,Ii,V,S/Ii(Ce) | 7 | |
| 01-0543-0000 | Head, Diamond & Beechjet (Ce) | 2 | |
| 01-0544-0000 | Head, Twin Otter(Hi-Float) (Ce | 1 | |
| 01-0545-0011 | Head, Saab Sf-340 & 2000 (Ce) | 5 | |
| 01-0546-0000 | Head, Gi/Gii/Giii/Giv (Ce) | 4 | |
| 01-0547-0000 | Head, Convair Thru 640 (Ce) | 1 | |
| 01-0548-0000 | Head, Nihon Ys-11 (Ce) | 1 | |
| 01-0549-0000 | Head, Falcon 10/20/100/200 (Ce | 2 | |
| 01-0550-0000 | Head, Challenger (Ce) | 4 | |
| 01-0551-0010 | Head, Shorts Sd330/Sd360 (Ce) | 1 | |
| 01-0552-0011 | Head, Casa Cn-235 (Ce) | 4 | |
| 01-0554-0000 | Head, Emb 110 (Ce) | 2 | |
| 01-0555-0000 | Head, Atp (Ce) | 1 | |
| 01-0556-0000 | Head, Dauphin (Commercial) (Ce | 2 | |
| 01-0558-0000 | Head, Atr 42/72 (Ce) | 6 | |
| 01-0559-0000 | Head, Westwind & Astra (Ce) | 4 | |
| 01-0560-0010 | Head, Falcon 50/900 (Ce) | 1 | |
| 01-0565-0000 | Head, Atp W/ Shear | 1 | |
| 01-0566-0000 | Head, Fokker 50 (Ce) | 2 | |
| 01-0569-0000 | Head, Fokker 50 (Ce) | 1 | |
| 01-0570-0010 | Head, Piaggio P-180 (Ce) | 2 | |
| 01-0571-0010 | HEAD, TOW BAR | 2 | |
| 01-0571-0011 | Head, Crj-100/200, Horizon(Ce) | 7 | |
| 01-0573-0012 | Head, Pilatus Pc-12 (Ce) | 2 | |
| 01-0574-0000 | HEAD, HS-125 & HAWKER 800 CE | 1 | |
| 01-0574-0010 | Head, Hs-125 & Hawker 800 (Ce) | 3 | |
| 01-0575-0011 | Head, Jetstream 41 (Ce) | 1 | |
| 01-0576-0000 | TRONAIR ATA-9 Standard Towbar Head, 13-5/8 in L, 6-1/4 in W, 4 in H, Steel, Blue | 6 | |
| 01-0577-0010 | Head, Puma (Ce) | 1 | |
| 01-0577-0020 | TRONAIR ATA-9 Standard Towbar Head, 28-1/4 in L, 29-5/8 in W, 7-3/8 in H, Steel, Blue | 2 | |
| 01-0578-0010 | Head, Cl-215/215t/415 (Ce) | 4 | |
| 01-0579-0000 | Head, Mi-8 (Ce) | 2 | |
| 01-0580-0000 | Head, Dauphin Hh-65a (Ce) | 1 | |
| 01-0582-0011 | Head, Erj 135/145 (Ce) | 8 | |
| 01-0586-0000 | Multi-Head, Crj-700 (Ce) | 1 | |
| 01-0587-0000 | Head, K8 (Ce) | 1 | |
| 01-0590-0000 | HEAD, DASH 8 100 - 300 | 9 | |
| 01-0591-0000 | Head, Lear W/ Shear (Ce) | 2 | |
| 01-0594-0000 | Head, Cessna Citation (Ce) | 5 | |
| 01-0595-0000 | Head, Raytheon T6a (Ce) | 2 | |
| 01-0597-0000 | Multi-Head, Challenger 300(Ce) | 10 | |
| 01-0598-0000 | Head, Eclipse 500 (Ce) | 1 | |
| 01-0599-0010 | Head, Sikorsky S-92 (Ce) | 2 | |
| 01-0601-0000 | Multi-Head,Embraer Phenom (Ce) | 3 | |
| 01-0602-0000 | Head, Falcon 7x (Ce) | 3 | |
| 01-0603-0000 | Head, Hawker 4000 Port (Ce) | 1 | |
| 01-0605-0000 | Head, Agusta Aw139 Portable | 4 | |
| 01-0606-0000 | Multi-Head, Embraer Phenom 300 | 5 | |
| 01-0607-0000 | HEAD, HONDAJET HA-420 | 1 | |
| 01-0612-0000 | TRONAIR ATA-9 Standard Towbar Head, 23-1/2 in L, 8 in W, 4-1/2 in H, Steel, Blue | 3 | |
| 01-0624-0000 | MULTI-HEAD, EMB PHENOM 100(CE) | 2 | |
| 01-0625-0000 | HEAD, PILATUS PC-12 CE | 3 | |
| 01-0701-0000 | ATTACHMENT HEAD, | 3 | |
| 01-0702-0000 | Multi-Head, Boeing 737 | 2 | |
| 01-0703-0000 | Multi-Head, Boeing 737 | 1 | |
| 01-0704-0000 | Multi-Head, Boeing 757 | 1 | |
| 01-0705-0001 | Multi-Head, Boeing 727 | 1 | |
| 01-0705-0002 | Multi-Head, Airbus A-300 | 1 | |
| 01-0706-0000 | Multi-Head, Md 80 Dc-9 | 1 | |
| 01-0711-0000 | Portable-Head, Boeing 757 | 1 | |
| 01-0712-0000 | Portable-Head, Boeing 727 | 1 | |
| 01-0713-0000 | Multi-Head, Boeing 727 | 1 | |
| 01-0714-0000 | Multi-Head, Boeing 737-100/900 | 2 | |
| 01-0801-0010 | Head, Global Express (Ce) | 5 | |
| 01-0801-0010 | HEAD, TOWBAR | 5 | |
| 01-0801-8010 | Head, Global Express (Ce) | 1 | |
| 01-0802-0011 | Head, Gulfstream Gii-Gv(Ce) | 1 | |
| 01-0803-0000 | Head, Crj-700/Crj-900 (Ce) | 3 | |
| 01-0806-0000 | Head, Gulfstream G650 (Ce) | 1 | |
| 01-0806-0010 | HEAD,GULFSTREA GII-GV-G650(CE) | 4 | |
| 01-0810-0000 | HEAD, TOWBAR | 3 | |
| 01-0810-0000 | HEAD, TOWBAR | 3 | |
| 01-1202-0000 | TOWBAR,MULTIHEAD,TRONAIR | 13 | |
| 01-1290-0100 | TOW BAR, MULTIHEAD, CE | 4 | |
| 01-1290-0100A3 | TOWBAR: MULTIHEAD,DESERT SAND, | 1 | |
| 01-8000-0000 | Head, Dash 8 100-300 (Ce) | 1 | |
| 0292717500 | BULKHEAD,REAR,EQUIPPED | 1 | |
| 0MP2505-2 | COUPLING: HALF,BULKHEAD, | 15 | |
| 0MP2506-3 | COUPLING: HALF,BULKHEAD, QUICK DISCONNECT | 22 | |
| 1-1901611-1 | HEAD, CCII, STRATO,24-20 | 1 | |
| 101891-62 | BOLT,HEX HEAD, GR8, .25-28UNF X .62L | 1 | |
| 125H-MH | LIXIE DEAD BLOW MALLET WITH HICKORY HANDLE #125H-MH, MALLEABLE IRON HEAD, 1-1/4" FACE DIAMETER, 22 O | 1 | |
| 15F2028 | 757 HEAD, | 1 | |
| 17MIT65B01211-1 | TORQUE RESTRICTOR - BULKHEAD, UPPER SHOCK STRUT, WING LANDING GEAR | 1 | |
| 185-0-X | HEAD, HEX KEY | 1 | |
| 2-069-69-0002 | FLEX 8 MM CONDUCTIVITY PROBE, 90° SHORT HEAD, FLEX. GOOSE NECK SHAFT 2.069.69-0002 | 1 | |
| 2.069.69-0002 | FLEX 8 MM CONDUCTIVITY PROBE, 90° SHORT HEAD, FLEX. GOOSE NECK SHAFT 2.069.69-0002 | 1 | |
| 20-127-4 | USATCO Angle Drill Attachments (Description: 90° Angle Head, 1/4 Capacity, 1/4-28 Thread) (Diameter: 3/4" (19 mm)) (Head size: 1-9/32" (33 mm)) (Overall length: 7-1/8" (181 mm)) (Side to center: 1-1/4" ((32 mm)) (Add to cart: Add To Cart) | 1 | |
| 20-127-45-4 | USATCO Angle Drill Attachments (Description: 90° Angle Head, 1/4 Capacity, 1/4-28 Thread) (Diameter: 3/4" (19 mm)) (Head size: 1-9/32" (33 mm)) (Overall length: 7-1/8" (181 mm)) (Side to center: 1-1/4" ((32 mm)) (Add to cart: Add To Cart) (Description: | 1 | |
| 20-129-4 | USATCO Angle Drill Attachments (Description: 90° Angle Head, 1/4 Capacity, 1/4-28 Thread) (Diameter: 3/4" (19 mm)) (Head size: 1-9/32" (33 mm)) (Overall length: 7-1/8" (181 mm)) (Side to center: 1-1/4" ((32 mm)) (Add to cart: Add To Cart) (Description: | 1 | |
| 20-130-4 | 360° ADJUSTABLE ANGLE HEAD, 1/4” CAPACITY, 1/4”-28 THREAD | 1 | |
| 20-133-20 | USATCO Angle Drill Attachments (Description: 90° Angle Head, 1/4 Capacity, 1/4-28 Thread) (Diameter: 3/4" (19 mm)) (Head size: 1-9/32" (33 mm)) (Overall length: 7-1/8" (181 mm)) (Side to center: 1-1/4" ((32 mm)) (Add to cart: Add To Cart) (Description: | 1 | |
| 20-350 | Socket Drive Angle Drill Attachments (Description: 90° Angle Head, 1/4 Square Drive) (Diameter: 3/4" (19 mm)) (Head size: 1.60" (41 mm)) (Overall length: 7" (178 mm)) (Side to center: 1-3/8" (35 mm)) (Add to cart: Add To Cart) | 1 | |
| 5420 | SMALL HEAD, POWER SWAGER | 1 | |
| 57340 | SENSOR HEAD, RF PEAK POWER METER (OR EQUIV.) | 1 | |
| 69099 | HEAD,CRIMPING-DYNA-CRIMP | 8 | |
| 650019 | SINGLE POSITION HEAD, UNIVERSAL | 1 | |
| 650091 | TURRET HEAD, UNMARKED (FOR VEAM) | 1 | |
| 2002171 | JX multi-head, heavy-duty steel towbar with linear shear protection and limited tow-eye rotation. [003340] | 1 | |
| 2003650 | New AERO towbar head, A400. For use with 001693 only, head only | 1 | |
| 2026339 | TOWBAR HEAD,REGIONAL/DEHAVILLAND | 1 | |
| 2321M30P01 | BOLT, SHEAR DOUBLE HEXAGON HEAD, .750-16 UNJF-3A | 1 | |
| 296050007 | Large Head, Orange CB Clip | 2 | |
| 296050008 | Large Head, Yellow CB Clip | 2 | |
| 332A91319100 | SLING, MAIN ROTOR HEAD, 5 BLADE | 1 | |
| 456MAX-701-17 | PULLING HEAD,PNEUMATIC RIVETER | 2 | |
| 456MAX-749-35 | PULLING HEAD,PNEUMATIC RIVETER | 1 | |
| 456MAX-763A-43 | PULLING HEAD,PNEUMATIC RIVETER | 1 | |
| 53-127-4C | USATCO Angle Drill Attachments (Description: 90° Angle Head, 1/4 Capacity, 1/4-28 Thread) (Diameter: 3/4" (19 mm)) (Head size: 1-9/32" (33 mm)) (Overall length: 7-1/8" (181 mm)) (Side to center: 1-1/4" ((32 mm)) (Add to cart: Add To Cart) (Description: | 1 | |
| 5420A-PLC | SMALL HEAD, POWER SWAGER | 1 | |
| 8MIT65B01211-1 | INSTALLATION AND REMOVAL TOOL - BULKHEAD, SHOCK STRUT, WING LANDING GEAR | 1 | |
| 9520011545 | HEAD,MAGNETIC,ELECTRIC | 1 | |
| 9520011605 | HEAD,MAGNETIC | 1 | |
| 9520011643 | HEAD,MAGNETIC,ELECTRIC | 1 | |
| 9520011649 | HEAD,MAGNETIC | 1 | |
| 9520011691 | HEAD,MAGNETIC | 1 | |
| 98D26203500000 | DISCHARGE HEAD,INSTL-FIRE EXTINGUISHER BOTTLE | 15 | |
| 98F26203500000 | DISCHARGE HEAD,INSTL-FIRE EXTINGUISHER BOTTLE | 1 | |
| 98F26203501000 | DISCHARGE HEAD,INSTL-FIRE EXTINGUISHER BOTTLE | 2 | |
| 98F26203501001 | DISCHARGE HEAD,INSTL-FIRE EXTINGUISHER BOTTLE | 11 | |
| 98F26203503000 | DISCHARGE HEAD, INST.- FIRE EXT | 2 | |
| 99-2701 | PULLING HEAD, REPLACES 99-680 | 6 | |
| 99-2707 | PULLING HEAD, HUCK 3/16" | 6 | |
| 99-2713 | PULLING HEAD, HUCK 1/4" | 2 | |
| 99-589 | PULLING HEAD,DOUBLE ACTION BLIND BOLT-3/16", 200 | 3 | |
| 99-600 | PULLING HEAD,DOUBLE ACTION BLIND BOLT-5/32", 200 | 4 | |
| A003817D | ATTACHMENT HEAD, | 6 | |
| A12008-1 | LUBRICATION ADAPTER - AFT WHEEL WELL BULKHEAD, SPHERICAL BEARING | 12 | |
| A32032-64 | SLING - OVERHEAD, MLG INSTALLATION/REMOVAL | 13 | |
| A32032-65 | SLING - OVERHEAD, MLG INSTALLATION/REMOVAL | 13 | |
| AGE-04914-401 | MULTI-HEAD,EMB PHENOM 300 (CE) | 3 | |
| AL120-05-DN20 | BULKHEAD, RAT TEST | 1 | |
| AL120-06-DN24 | BULKHEAD, RAT TEST | 1 | |
| AS5180D04 | FITTING,ADAPTER,BULKHEAD,FLARED TO HOSE | 3 | |
| AT118 | DIE GRINDER,PNEU,90 DEG HEAD,1/4"COLLET | 1 | |
| AT590L | SHAVER,RIVET HEAD,PORTABLE,PNEUMATIC | 2 | |
| B737GPUPOWERCABLE | 6 POLE (ABCN, E-F), 400 HERTZ, ABOVE 90KVA APPLICATION, 60 FOOT LENGTH, NON METALLIC MOLDED FEMALE HEAD, WITH OTHER END FITTED WITH COPPER LUGS | 1 | |
| BA-SB06-752B-20-GB | PULLING HEAD, HUCK 3/16" | 1 | |
| BACB30US8K25Y | BOLT, 12 POINT HEAD, 220 KSI MIN TEN | 1 | |
| BH1/4 | BH 1/4 INTERCHANGEABLE TORQUE WRENCH HEAD, 13/16 INCH DRIVE SIZE, 1/4 INCH SIZE, SAE | 1 | |
| BH3/8 | BH 3/8 INTERCHANGEABLE TORQUE WRENCH HEAD, 13/16 INCH DRIVE SIZE, 3/8 INCH SIZE, SAE | 1 | |
| BH5/16 | BH 5/16 INTERCHANGEABLE TORQUE WRENCH HEAD, 13/16 INCH DRIVE SIZE, 5/16 INCH SIZE, SAE | 1 | |
| C26025-4 | HEAD,OPEN END | 1 | |
| C27042-4 | HEAD,OPEN END | 1 | |
| DCM1580-1 | HEAD,TOWBAR | 1 | |
| DMC986 | AF8 Tool Kit with Single Position Head, Removal Tool & Wire Stripper | 2 | |
| E707BCG | Cutters, Electronic, Tapered Head, 4 3/8in (AWG no.17 max.) | 3 | |
| E709ACG | CUTTERS, ELECTRONIC, TAPERED HEAD, 4 7/16" (AWG #17 MAX.) | 1 | |
| E710BCG | Cutters, Electronic, Tapered Head, 5 3/16" (AWG #12 max.) | 2 | |
| EAA0329G95A | MOUNT/DISMOUNT HEAD, STD | 1 | |
| EE2202N | SLING – OVERHEAD, MLG INSTALLATION/REMOVAL | 1 | |
| F80 | RATCHET, SEALED HEAD, 3/8 DRIVE, 7 11/32 | 3 | |
| F80199-12 | TOWBAR HEAD, NOSE GEAR | 1 | |
| F830 | RACHET, 3/8, ROUND HEAD, 5/8 (Head Depth) X 1 5/32 | 1 | |
| FBPT-SC | TIP - FIBER OPTIC, BULKHEAD, SC-TYPE | 2 | |
| FK80 | Ratchet, Sealed Head, Dual 80™ Technology, Stubby Handle, 3/8" drive, 4 1/8" | 2 | |
| G-110-108514 | TRONAIR JACKS, BOLT, HEX HEAD, GRADE 5, (7/16-20 X 1 1/2" LONG) | 1 | |
| G-1100-107520 | BOLT, HEX HEAD, GRADE 5, 3/8-24 X 2” LONG. (TOW-BAR HEAD MODEL: 01-0400-400) | 1 | |
| G1151-107206 | SCREW: SOCKET HEAD, CAP, STEEL, | 2 | |
| G1155-109216 | SCREW: SHOULDER HEAD, 5/8IN, STEEL, | 3 | |
| GA184A | TORQUE MULTIPLIER X4 GEARED HEAD, BAR REACTION, 1000 FT. LB. OUTPUT | 3 | |
| GTECH1FRATA | RAT HEAD,1/4IN DR 72TBO | 1 | |
| Gedore-7672710 | Gedore 7672710 9x12 RECTANGULAR 1/4 REVERSIBLE RATCHET HEAD, Torque Wrench End Fittings | 1 | |
| Gedore-7686500 | Gedore 7686500 9x12 RECTANGULAR 3/8 REVERSIBLE RATCHET HEAD, Torque Wrench End Fittings | 1 | |
| Gedore-7687230 | Gedore 7687230 9x12 RECTANGULAR 1/2 REVERSIBLE RATCHET HEAD, Torque Wrench End Fittings | 1 | |
| H563-5B | PULLING HEAD,OFFSET,LOCKBOLT | 1 | |
| H563-6B | PULLING HEAD,OFFSET,LOCKBOLT 3/16 FOR G84 OR 352 | 1 | |
| H680B200A | PULLING HEAD, CHERRYMAX | 4 | |
| H681-5C | PULLING HEAD, CHERRYMAX (5/32) | 6 | |
| H681-6C | PULLING HEAD, CHERRY RIVITER | 8 | |
| H701B-456 | PULLING HEAD, CHERRYMAX | 10 | |
| H828-6MB | PULLING HEAD,RIGHT ANGLE, | 1 | |
| H83B-5MB | BLIND BOLT PULLING HEAD, 5/32" | 5 | |
| H83B-6MB | BLIND BOLT PULLING HEAD, 3/16" | 7 | |
| H84A-8 | STRAIGHT PULLING HEAD, | 7 | |
| H856-6MB | PULLING HEAD,OFFSET,MAXIBOLT 3/16" FOR G84352(NEEDS | 2 | |
| HPS202 | RIVET TOOL, SWIVEL HEAD, 3/32" TO 3/16" | 2 | |
| HX62 | HEAD, HEX KEY 3/32 IN. | 1 | |
| J71075-1 | SLING EQUIPMENT - REMOVAL AND INSTALLATION, AFT BULKHEAD, 777 GE90-100 INLET | 3 | |
| K32014-1 | SLING - OVERHEAD, MLG INSTALLATION/REMOVAL (REQUIRES OVERHEAD CRANE HOIST) | 7 | |
| L872 | HEAD, SEALED RATCHET | 3 | |
| LB102 | HEAD, BOX END,5/16IN. SIZE A | 1 | |
| M22520-1-02 | TURRET HEAD,CRIMPIN | 18 | |
| ME65B18260 | TOOL INSTALLATION/REMOVAL - UPPER BULKHEAD, WING LANDING GEAR STRUT | 1 | |
| MIT65B05315 | TOOL - INSTALLATION/REMOVAL UPPER BULKHEAD, WING LANDING GEAR STRUT | 1 | |
| MIT65B18231 | TORQUE RESTRICTOR - BULKHEAD, SHOCK STRUT, BODY LANDING GEAR | 1 | |
| MS21913-16 | PLUG HEX HEAD, FLARELESS, CAR | 11 | |
| N51-1 | SNAKE DRILL-90°HEAD, SPL THD1/4-28" | 1 | |
| NAS6203L3H | BOLT, HEXAGONAL HEAD, CLOSE TOLERANCE | 1 | |
| NAS6604-18D | LENGTH: 1.55", GRIP: 1.125", THREAD: 1/4-28, HEX HEAD, TENSION, LONG THREAD, CADMIUM PLATED ALLOY STEEL | 1 | |
| NDT 3001 | BS 178 BULKHEAD, PT 4, 53-10-05 | 2 | |
| NDT 3007 | BS 178 BULKHEAD, PT 4, 53-10-05 | 1 | |
| NP0238 | HEAD, TOWBAR | 1 | |
| NP0238 | HEAD,TOWBAR | 1 | |
| OE3/8 | INTERCHANGEABLE TORQUE WRENCH HEAD, 13/16 INCH DRIVE SIZE, 3/8 INCH SIZE | 1 | |
| OE5/16 | OE 5/16 INTERCHANGEABLE TORQUE WRENCH HEAD, 13/16 INCH DRIVE SIZE, 5/16 INCH SIZE | 1 | |
| OMP2506-3 | COUPLING: HALF,BULKHEAD, QUICK DISCONNECT | 22 | |
| P87150A | P-SERIES CUTTING PLIERS (RED), TRUE FLUSH CUT, OVAL HEAD, .40-1.60 WIRE DIAMETER | 1 | |
| PC757-01SB | COVER, PITOT HEAD, 2ND | 9 | |
| PWA101418 | STANDARD HEXHEAD, 8-32 X 1.5 INCH (38.1MM) | 3 | |
| QD1200 | ADJUSTABLE TORQUE WRENCH, 1/4 IN DRIVE, FIXED HEAD, 40 - 200 IN-LB, 1 IN-LB, 10-15/16 IN OAL | 7 | |
| QJO10A | HEAD, OPEN END | 1 | |
| R33M000M80 | DRILL HEAD, STRIGHT, 8MM | 1 | |
| R33M030D17P64 | DRILL HEAD, 30 DEGREE, 6.4MM | 1 | |
| R33M090D17F1/4 | DRILL HEAD, 90 DEGREE, 6.4MM | 1 | |
| R33M090D17P45 | DRILL HEAD, 90 DEGREE, 4.5MM | 1 | |
| R33M090D17P64 | DRILL HEAD, 90 DEGREE, 6.4MM | 1 | |
| R33M090D25P80 | DRILL HEAD, 90 DEGREE, 8MM | 1 | |
| RSE1068 | SQUEEZER HEAD, RIVET | 2 | |
| RSE1068 REV B | SQUEEZER HEAD, RIVET | 1 | |
| RSEI068 | SQUEEZER HEAD, RIVET | 1 | |
| SB05-752C-20 | PULLING HEAD, HUCK 5/32 | 4 | |
| SCRT.749-S/6 ELS | .749" Diameter, Triangle Head, EC Probe | 1 | |
| SCRT.912-S/6 | .912" Diameter, Triangle Head, EC Probe | 1 | |
| SCRT.912-S/6 ELS | .912" Diameter, Triangle Head, EC Probe | 1 | |
| SHLF80 | Ratchet, Dual 80®, Flex Head, Long Standard Handle, Comfort Grip, 1/2" drive, 25 3/4" | 1 | |
| ST0027786 | HEAD, VW PLASTIC | 1 | |
| STD-2493 | HOIST - OVERHEAD, CAPACITY 10,000 LB | 1 | |
| TFY72 | RATCHET, HI-LOK,FLEX HEAD,6 1/4 | 2 | |
| TFY936 | RATCHET, 1/4" DRIVE, FLEXIBLE HEAD, HY-LOK® | 3 | |
| TH501 | HEAD, TURRET, COAX 12-26AWG | 2 | |
| THL72 | Ratchet, Sealed Head, (High Strength), Long handle, Soft Grip, Red, 6 7/8" | 2 | |
| THLF72 | Ratchet, Sealed Head, Long Flex-Handle, Soft Grip, Red 8 1/4" | 1 | |
| THNF72 | RATCHET, ROUND HEAD, | 2 | |
| TP960 | HEAD, SINGLE POSITION (CRIMP TOOL TURRET) | 3 | |
| TPG54H03 | Twin Head Tyre Gauge, 8V1 & 12V1 Head, 50-300 psi & 4-20 bar | 11 | |
| TYATP1 | BAC Fixed Wing Multi-Link Towbar Head, 3 in Dia, 15-1/2 in L, 3-1/2 in W, 3 in H, Yellow | 2 | |
| TYAW139 | BAC Multi-Link Towbar Head, 24.863 in L, Powder-Coated, Yellow | 2 | |
| TYBJS1 | BAC Fixed Wing Multi-Link Towbar Head, Powder-Coated, Yellow | 2 | |
| TYC0N1 | BAC Fixed Wing Multi-Link Towbar Continental Head, 21-15/16 in L, Powder-Coated, Yellow | 2 | |
| TYCA415 | BAC Fixed Wing Multi-Link Towbar Head, Powder-Coated, Yellow | 3 | |
| TYCAS1 | BAC Fixed Wing Multi-Link Towbar Head, Powder-Coated, Yellow | 2 | |
| TYCHA1 | BAC Fixed Wing Multi-Link Towbar Head, 16-1/4 in L, Powder-Coated, Yellow | 2 | |
| TYCIT1 | BAC Fixed Wing Multi-Link Towbar Head, 23.925 in L, Powder-Coated, Yellow | 2 | |
| TYCIT2 | BAC Fixed Wing Multi-Link Towbar Head, Powder-Coated, Yellow | 2 | |
| TYCRJ1 | BAC Fixed Wing Multi-Link Towbar Head, 40.788 in L, Powder-Coated, Yellow | 2 | |
| TYCRJ2 | BAC Fixed Wing Multi-Link Towbar Head, 34.218 in L, Powder-Coated, Yellow | 2 | |
| TYD8-4 | BAC Fixed Wing Multi-Link Towbar Head, 16-1/2 in L, Powder-Coated, Yellow | 2 | |
| TYDBJ1 | BAC Fixed Wing Multi-Link Towbar Head, Powder-Coated, Yellow | 2 | |
| TYEMB1 | BAC TY-EMB1 Tow-Bar Head, Yellow, Powder-Coated, 21 lb Head | 3 | |
| TYEMB2 | BAC Fixed Wing Multi-Link Towbar Head, Powder-Coated, Yellow | 2 | |
| TYF0K1 | BAC Fixed Wing Multi-Link Towbar Head, Powder-Coated, Yellow | 2 | |
| TYFAL1 | BAC Fixed Wing Multi-Link Towbar Head, Powder-Coated, Yellow | 2 | |
| TYFAL2 | BAC Fixed Wing Multi-Link Towbar Head, Powder-Coated, Yellow | 2 | |
| TYGAL1 | BAC Fixed Wing Multi-Link Towbar Head, Powder-Coated, Yellow | 2 | |
| TYGAL2 | BAC Fixed Wing Multi-Link Towbar Head, 19.595 in L, 5 in W, 3 in H, Powder-Coated, Yellow | 2 | |
| TYGUL1 | BAC Fixed Wing Multi-Link Towbar Head, Powder-Coated, Yellow | 2 | |
| TYGUV1 | BAC Fixed Wing Multi-Link Towbar Head, Powder-Coated, Yellow | 2 | |
| TYHAW1 | BAC Fixed Wing Multi-Link Towbar Head, Powder-Coated, Yellow | 2 | |
| TYKQA1 | BAC Fixed Wing Multi-Link Towbar Head, Powder-Coated, Yellow | 2 | |
| TYMH53 | BAC Multi-Link Towbar Head, Powder-Coated, Yellow | 2 | |
| TYPHE2 | BAC Fixed Wing Multi-Link Towbar Head, Powder-Coated, Black | 2 | |
| TYPHE3 | BAC TY-PHE3 Tow-Bar Head, Yellow, Powder-Coated, For Embraer Phenom 300 Aircrafts | 3 | |
| TYPIA | BAC Fixed Wing Multi-Link Towbar Head, Powder-Coated, Yellow | 2 | |
| TYPIL1 | BAC Fixed Wing Multi-Link Towbar Head, Powder-Coated, Yellow | 2 | |
| TYSAA1 | BAC Fixed Wing Multi-Link Towbar Head, Powder-Coated, Yellow | 2 | |
| TYSAB1 | BAC Fixed Wing Multi-Link Towbar Head, Powder-Coated, Yellow | 2 | |
| TYWES1 | BAC Fixed Wing Multi-Link Towbar Head, Powder-Coated, Yellow | 2 | |
| US7387RSE | SHAVER,RIVET HEAD,PORTABLE,PNEUMATIC | 1 | |
| V013 | HEAD, CRIMPING | 1 | |
| V0130K | HEAD, CRIMPING | 4 | |
| V0133K | HEAD, CRIMPING | 1 | |
| VF13 | HEAD,CRIMPING | 1 | |
| VO130K | HEAD, CRIMPING | 4 | |
| VO133K | HEAD, CRIMPING | 1 | |
| VS10B | WRENCH,OPEN END,4-WAY ANGLEHEAD,5/16" | 3 | |
| VS11B | WRENCH,OPEN END,4-WAY ANGLEHEAD,11/32" | 3 | |
| VS12B | WRENCH,OPEN END,4-WAY ANGLE HEAD,3/8" | 3 | |
| VS14B | WRENCH,OPEN END,4-WAY ANGLEHEAD,7/16" | 2 | |
| VS16B | WRENCH,OPEN END,4-WAY ANGLE HEAD,1/2" | 3 | |
| VS18B | WRENCH,OPEN END,4-WAY ANGLEHEAD,9/16" | 2 | |
| VS20B | WRENCH,OPEN END,4-WAY ANGLE HEAD,5/8" | 1 | |
| VS22B | WRENCH,OPEN END,4-WAY ANGLEHEAD,11/16" | 2 | |
| VS24B | WRENCH,OPEN END,4-WAY ANGLE HEAD,3/4" | 3 | |
| VS26B | WRENCH,OPEN END,4-WAY ANGLEHEAD,13/16" | 2 | |
| VS28B | WRENCH,OPEN END,4-WAY ANGLE HEAD,7/8" | 3 | |
| VS30B | WRENCH,OPEN END,4-WAY ANGLEHEAD,15/16" | 2 | |
| VS32B | WRENCH,OPEN END,4-WAY ANGLE HEAD, 1" | 2 | |
| VS34B | WRENCH, OPEN END, 4-WAY ANGLE HEAD, 11/16" | 1 | |
| VS36B | WRENCH, OPEN END, 4-WAY ANGLE HEAD, 11/8" | 1 | |
| VS38B | WRENCH, OPEN END, ANGLE HEAD, 4-WAY, 1-3/16" | 1 | |
| VS40B | WRENCH, OPEN END, ANGLE HEAD, 4- WAY, 1-1/4" | 1 | |
| VS8B | WRENCH OPEN END FOUR WAY ANGLE HEAD, 1/4" | 3 | |
| WRENCH, OPEN END, 4-WAY ANGLE HEAD, 1/2" | WRENCH, OPEN END, 4-WAY ANGLE HEAD, 1/2" | 1 | |
| WRENCH, OPEN END, 4-WAY ANGLE HEAD, 3/8" | WRENCH, OPEN END, 4-WAY ANGLE HEAD, 3/8" | 1 | |
| WRENCH, OPEN END, 4-WAY ANGLE HEAD, 5/8" | WRENCH, OPEN END, 4-WAY ANGLE HEAD, 5/8" | 1 | |
| WRENCH, OPEN END, 4-WAY ANGLE HEAD, 7/16" | WRENCH, OPEN END, 4-WAY ANGLE HEAD, 7/16" | 1 | |
| WRENCH, OPEN END, 4-WAY ANGLE HEAD, 9/16" | WRENCH, OPEN END, 4-WAY ANGLE HEAD, 9/16" | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
