| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 1610000F34 | HAND CRANK | 1 | |
| 1X56176791 | HAND CRANK | 1 | |
| RRT095945 | HAND CRANK | 2 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) AGE70496 | TOOL - HAND CRANK (CALIBRATION) | 1 | |
| (CALIB) RRT095945 | Hand Crank Tool (CALIBRATION) (CALIBRATION) | 1 | |
| 14MB96 | CRANK HANDLES FOR SHAFT 14mm | 1 | |
| 17552-3 | THREAD INSERT HAND INSTALLATION TOOL: #10-32, CRANK STYLE | 1 | |
| 205P4 | 45°CRANK-DELRIN HANDLE | 1 | |
| 206P8 | PROBE - PENCIL 45° CRANK WITH DELRIN HANDLE FREQ. 2MHZ (NFE) OR SIMILAR (HOCKING) | 1 | |
| 289816-1 | TOOL - HAND CRANK | 3 | |
| 289816-2 | TOOL - HAND CRANK | 1 | |
| 2C5825G02 | CRANK - HAND MOTORING | 1 | |
| 2KPHF6 | THREAD INSERT HAND INSTALLATION TOOL: 3/8-24, CRANK STYLE & TYPE II PREWINDER | 2 | |
| 313P24F | 15CRANK,90TIP DELRIN HANDLE | 1 | |
| 340-320-402-0 | HAND CRANKING KIT ASSEMBLY | 1 | |
| 51C1077-1 | CRANK HANDLE | 1 | |
| 856A2686 | Hand Cranking Drive Socket | 1 | |
| 856A2686G01 | HAND CRANKING DRIVE SOCKET - HPC | 2 | |
| 856A2718 | TOOL SET, REMOVE/INSTALL HANDCRANKING DRIVE & HOR DRIVE SHAFT | 4 | |
| 856A2718G01 | TOOL SET, REMOVE/INSTALL HANDCRANKING DRIVE AND HORIZONTAL DRIVE SHAFTS (TOOL SET) | 8 | |
| 856A2718G02 | R/I HANDCRANK/HORIZDRVSHFT | 8 | |
| 856A2718G03 | R/I HANDCRANKING DRIVE SET | 9 | |
| 856A2718G04 | R/I HANDCRANK/HORIZDRVSHFT | 3 | |
| 856A2718G05 | TOOL SET, REMOVE/INSTALL HANDCRANKING DRIVE & HOR DRIVE SHAFT | 6 | |
| 856A2796 | SAFETY PROTECTOR _ HANDCRANKING PAD | 1 | |
| 856A2796G01 | SAFETY PROTECTOR HANDCRANKING PAD | 13 | |
| 856A2824 | AGB SPOOL,REMOVAL/INSTALLATION KIT (HANDCRANKING LINE) | 1 | |
| 856A2824G01 | AGB SPOOL,REMOVAL/INSTALLATION KIT HANDCRANKING L | 4 | |
| 856A2825 | LEAK TEST- TOOL, SLEEVE (HANDCRANKING LINE) | 1 | |
| 856A2869G01 | LEAK TEST - AGB HANDCRANKING | 1 | |
| 856A2961G02 | INS/REM FIXTURE - AGB HANDCRANKING SEALOL | 8 | |
| 856A2961G03 | INS/REM FIXTURE - AGB HANDCRANKING | 13 | |
| 856A3548G03 | LEAK TEST - AGB HANDCRANKING | 5 | |
| 856A3624 | SAFETY PROTECTOR HANDCRANKING PAD | 1 | |
| 856A3624 REV A | SAFETY PROTECTOR HANDCRANKING PAD | 1 | |
| 856A3624G01 | SAFETY PROTECTOR - HANDCRANK PAD AGB | 2 | |
| 856A3802 | PUSHER, BALL BRG. HANDCRANK SPLINED SHAFT | 1 | |
| 856A3802 REV A | PUSHER, BALL BRG. HANDCRANK SPLINED SHAFT | 1 | |
| 856A3802P01 | PUSHER, HANDCRANK SPLINED SHAFT | 1 | |
| 8C3484 | HANDLE - CRANK - AGBX | 1 | |
| 8C3554 | HANDLE - CRANK - TGBX - IGBX - VERTICAL | 1 | |
| 956A1609G01 | JACKSCREWS,TOOL SET(HANDCRANK PAD) | 4 | |
| AF-5096/2M/LOO | RIGID SURFACE PROBE ABS SHEILDED 90° DEGREES .200" DROP, .098"Ø, 30°DEGREES CRANK AT 1.0" FROM THE HANDLE , 4.0" LONG WITH LEMO 00 CONNECTOR 1-3MHZ. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5283 | Custom Eddy Current Pencil Probe for SB 215-A476, .093"Ø Stainless Steel Shaft, Absolute Shielded, 3.0" Long Handle, 30° Crank Which Extends 3.0" from the Handle, 1.0" Drop, Frequency 100KHz-1MHz with an Operating Frequency of 100KHz, Supplied with a Mic | 1 | |
| AF-5284 | Rigid Surface Probe, Absolute 500KHz Center Frequency, 5.0 (MIN) Tip Length, 86mm Long Handle with a Total Probe Length of 114mm, 4.5”, (15deg Crank, 90° deg tip Shank) 4.74mm Ø Tip Supplied with a Microdot Connector. Includes Test Report and Certificate | 1 | |
| AF-5285 | Rigid Surface Probe, Absolute 500KHz Center Frequency, 2.7 (MIN) Tip Length, 86mm Long Handle with a Total Probe Length of Total 114mm, 4.5”, (15deg Crank, 90° deg tip Shank) 3.30mm Ø Tip Supplied with a Microdot Connector. Includes Test Report and Certif | 1 | |
| AGE70496 | A CRANK, HAND, GEARBOX | 6 | |
| ASPN-95-4.5B/6M | HIGH FREQUENCY SURFACE PROBE, 6MHz 15° CRANK BENT 1.0" FROM THE HANDLE WITH 90° TIP, .500" DROP, 4.5" LONG SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AXXTPN-92-4B/1-6M | RIGID SURFACE PROBE, 90° DEGREES 15° CRANK 3” FROM THE HANDLE, .062"Ø TIP .200" DROP, 1-6MHz, 4.0" LONG SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AXXTPN-92-4B/200K-1M | RIGID SURFACE PROBE, 90° DEGREES 15° CRANK 3” FROM THE HANDLE, .062"Ø TIP .200" DROP, 200KHz-1MHz, 4.0" LONG SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| C208-3-100H | 208 series hand crank (100' x 3/8") | 1 | |
| C208-4-65H | 208 series hand crank (65' x 1/2") | 1 | |
| C460-3-350H | 350' X 3/8" HAND CRANK 460 SERIES | 1 | |
| C460-4-270H | 270' X 1/2" HAND CRANK 460 SERIES | 1 | |
| C71015-9 | Crank Handle | 1 | |
| CXR112W1100 | 100FT HAND CRANK WELDING REEL | 1 | |
| CXR112W150 | 50FT HAND CRANK WELDING REEL | 1 | |
| EGCH | EMERGENCY GEAR CRANK HANDLE | 1 | |
| F4LB | HANDLE CRANK - 3/8" DRIVE | 6 | |
| F50B971306D2 | WINCH CRANK HANDLE | 3 | |
| G26002-8 | CRANK HANDLE | 1 | |
| G71010-46 | CRANK HANDLE ASSY | 1 | |
| G71010-55 | CRANK HANDLE | 1 | |
| LTCT4650 | CRANK, HAND TOOL | 1 | |
| MA6128 | CRANK HANDLE FOR MODEL AP6108 | 1 | |
| MTF 905-60-B | SURFACE PENCIL PROBE, 90 DEGREES DROP ANGLE, 50-500 KHZ FREQUENCY, CRANKED, ABSOLUTE, SHIELDED, 0.125 IN. (3.18 MM) DIAMETER, 6.00 IN. (152.4 MM) LENGTH, 30 DEGREE BENT SHAFT ANGLE (AT THE HANDLE), 0.500 IN. (12.70 MM) TIP LENGTH, (OLYMPUS OR EQUIVALENT) | 1 | |
| N8323 | LOADER HANDCRANK | 1 | |
| PEN45-8/2M | PROBE - PENCIL 45° CRANK WITH DELRIN HANDLE FREQ. 2MHZ (NFE) OR SIMILAR (HOCKING) | 1 | |
| PME60B10005-75 | Crank handle | 1 | |
| PWA 49058 | HANDLE, CRANK | 1 | |
| PWA115070 | PULLER, HAND-GEARBOX, CRANK PAD COV | 2 | |
| PWA211159 | HANDCRANK PULLER | 4 | |
| PWA49058 | ROTATOR-HAND, GEARBOX, CRANK PAD | 1 | |
| TF50B71306 | WINCH CRANK HANDLE | 3 | |
| TPEN95-6B | SURFACE PENCIL PROBE, 90 DEGREES DROP ANGLE, 50-500 KHZ FREQUENCY, CRANKED, ABSOLUTE, SHIELDED, 0.125 IN. (3.18 MM) DIAMETER, 6.00 IN. (152.4 MM) LENGTH, 30 DEGREE BENT SHAFT ANGLE (AT THE HANDLE), 0.500 IN. (12.70 MM) TIP LENGTH, (OLYMPUS OR EQUIVALENT) | 1 | |
| TSPEN32-4C | 30° Surface Probe, .072" x .200" Drop x 4.0" Long, 50-500KHz, Cranked Handle Config Triax Connector | 1 | |
| TSPEN91-4C | 90° Surface Probe, .072" x .100" Drop x 4.0" Long, 50-500KHz, Cranked Handle Config Triax Connector | 1 | |
| TSPEN91-4C/500K | 90° Surface Probe, .072" x .100" Drop x 4.0" Long, 200KHz-1MHz, Cranked Handle Config Triax Connector | 1 | |
| TSPEN92-4C | 90° Surface Probe, .072" x .200" Drop x 4.0" Long, 50-500KHz, Cranked Handle Config Triax Connector | 1 | |
| TSPEN92-4C/2M | 90° Surface Probe, .072" x .200" Drop x 4.0" Long, 1-3MHz, Cranked Handle Config Triax Connector | 1 | |
| TSPEN92-6C | 90° Surface Probe, .072" x .200" Drop x 6.0" Long, 50-500KHz, Cranked Handle Config Triax Connector | 1 | |
| TSPEN93-4C | 90° Surface Probe, .072" x .300" Drop x 4.0" Long, 50-500KHz, Cranked Handle Config 1" From Coil End, Triax Connector, Shieled | 1 | |
| WIL5625111 | CRANK HANDL | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
