| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 804216-S76-1 | Go/No Go Gage | 1 | |
| 98D27504008000 | GO/NO GO GAGE | 18 | |
| APN 804216-S76-1 | GO/NO GO GAGE | 1 | |
| APN804216-S76-1 | GO/NO GO GAGE | 1 | |
| G120 | GO/NO GO GAGE | 2 | |
| G145 | GO/NO GO GAGE | 2 | |
| G191 | GO/NO GO GAGE | 2082 | |
| G192 | GO/NO GO GAGE | 2082 | |
| G197 | GO/NO GO GAGE | 2082 | |
| G410 | GO/NO GO GAGE | 2082 | |
| G467 | GO/NO GO GAGE | 2082 | |
| G487 | GO/NO GO GAGE | 2082 | |
| G996 | GO/NO GO GAGE | 2082 | |
| SR31GSD-NI | GO/NO GO GAGE | 2082 | |
| SR37GSD-NI | GO/NO GO GAGE | 2082 | |
| T2980-001 | Go/no Go Gage | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 11C23-10524 | TOOL, GAGE, GO/NO GO GROUND PWR | 1 | |
| 14-5978-01 | GO/NO-GO GAGE | 1 | |
| 1M14085 | Checking go/no-go gage | 1 | |
| 1M14138 | Checking go/no-go gage | 1 | |
| 2C8055 | GO/NO GO GAGE SPLINE WEAR, HORIZ DRIVE SHAFT - 1GB | 1 | |
| 2C8055 REV B | GO/NO GO GAGE SPLINE WEAR, HORIZ. DRIVE SHAFT - IGB | 1 | |
| 2C8063 | GO/NO GO GAGE, INSPECT-SPLINED ADAPTOR | 1 | |
| 2C8063 REV C | GO/NO GO GAGE, INSPECT-SPLINED ADAPTOR | 1 | |
| 2C8064 | GO/NO GO GAGE, INSPCT-SPLINED ADAPTOR | 1 | |
| 2C8064 REV C | GO/NO GO GAGE, INSPCT-SPLINED ADAPTOR | 1 | |
| 5/8-18-TRG-3A-SET | THREAD RING GAGE GO/NOGO AS PER 5/8-18-UNJF-3A | 2082 | |
| 5/8-18-UNJF-3A | GO/NO-GO GAGE | 1 | |
| 60092 | ELCON 29 GO/NO GO GAGE | 1 | |
| 804216-S76-1 | GO/NO GO GAGE USED TO CHECK VALVE BODY THREAD | 1 | |
| 88-100 | Gage Set for AF8-Go/No-Go Sel 1-8 | 4 | |
| 88-200 | Gage Set for AFM8-Go/No-Go Sel 1-8 | 2 | |
| 88-300BT | Gage Set for M300BT-Go/No-Go Sel 1-8 | 2 | |
| 88-309 | Gage Set for M309-Go/No-Go Sel 1-8 | 2 | |
| 88-700 | Gage Set for MH860-Go/No-Go Sel 1-8 | 2 | |
| 88-800 | Gage Set for MH800-Go/No-Go Sel 1-8 | 2 | |
| 98D27504008000 | GAGE - GO/NO GO | 18 | |
| 98D27804013000 | GAGE-GO/NO GO (SLATS) | 9 | |
| 98S71003010000 | GO/NO GO GAGE SHOCHKMOUNT | 6 | |
| 9C1446 | GAGE BLOCK,GO/NO-GO OUTER HANGER ADJUSTMENT | 1 | |
| AB27001-VQ4 | GAGE - GO/NO GO | 1 | |
| AGE-03751-401 | GO/NO GAGE FLAP RIGGING | 3 | |
| AMTG4301 | Gage Go/No-Go Size 22-16 - M22520/43-01 | 2 | |
| AMTG4302 | Gage Go/No-Go Size 16-14 - M22520/43-02 | 2 | |
| AMTG4303 | Gage Go/No-Go Size 22-16 - M22520/43-03 | 2 | |
| AMTG4304 | Gage Go/No-Go Size 16-14 - M22520/43-04 | 2 | |
| CAFG-60-1-.3740 | NOM GO/NOGO/GAGE | 1 | |
| CAFG-60-1-.3770 | NOM GO/NOGO/GAGE | 1 | |
| CAFG-61-1-.3895 | 1ST GO/NOGO GAGE | 1 | |
| CAFG-61-1-.3920 | 1ST GO/NOGO GAGE | 1 | |
| CAFG-62-1-4050 | 2ND O.S. GO/NOGO GAGE | 1 | |
| CAFG-62-1-4075 | 2ND O.S. GO/NOGO GAGE | 1 | |
| CASR-60-1 | 2ND O.S. GO/NOGO GAGE | 1 | |
| CRFG-R32-1-XXXX/YYYY | Final hole gage - XXXX = diameter gage finish reamer; YYYY = go/no-go measurements of the final hole gage | 1 | |
| CRFG-R40-1-XXXX/YYYY | Final hole gage - XXXX = diameter gage finish reamer; YYYY = go/no-go measurements of the final hole gage | 1 | |
| CRFG-R42-1-XXXX/YYYY | Final hole gage - XXXX = diameter gage finish reamer; YYYY = go/no-go measurements of the final hole gage | 1 | |
| CRFG-R50-1-XXXX/YYYY | Final hole gage - XXXX = diameter gage finish reamer; YYYY = go/no-go measurements of the final hole gage | 1 | |
| CRFG-R52-1-XXXX/YYYY | Final hole gage - XXXX = diameter gage finish reamer; YYYY = go/no-go measurements of the final hole gage | 1 | |
| CRFG-R60-1-XXXX/YYYY | Final hole gage - XXXX = diameter gage finish reamer; YYYY = go/no-go measurements of the final hole gage | 1 | |
| CRFG-R62-1-XXXX/YYYY | Final hole gage - XXXX = diameter gage finish reamer; YYYY = go/no-go measurements of the final hole gage | 1 | |
| G1007 | GO/NO-GO GAGE | 2082 | |
| G1122 | GAGE, GO/NO-GO M22520/39-03 GMT1090 | 2 | |
| G120 | GO/NO-GO GAGE | 2082 | |
| G1261 | Gage - GO/NO-GO for Y832 Cavity "B" | 2 | |
| G190 | GO/NO-GO GAGE | 2082 | |
| G191 | GO/NO-GO GAGE | 2 | |
| G278 | GO/NO-GO GAGE | 2082 | |
| G322 | GO/NO-GO GAGE | 2082 | |
| G395 | GO/NO-GO GAGE | 2082 | |
| G415 | GO/NO-GO GAGE | 2082 | |
| G654 | GO/NO-GO GAGE | 2082 | |
| G693 | GO/NO-GO GAGE | 2082 | |
| G713 | Gage - Stepped GO/NO-GO - M22520/39-02 | 2 | |
| G740 | GO/NO-GO GAGE | 2082 | |
| G741 | GO/NO-GO GAGE | 2082 | |
| G768 | GO/NO-GO GAGE | 2082 | |
| G769 | GO/NO-GO GAGE | 2082 | |
| G770 | GO/NO-GO GAGE | 2082 | |
| HG169-08 | GO/NO-GO GAGE | 1 | |
| IAE1M14117 | GAGE, CHECKING GO/NO GO | 5 | |
| IAE1M14118 | GAGE, CHECKING - GO/NO GO | 3 | |
| IAE1M14121 | GAGE, CHECKING GO/NO GO | 3 | |
| IAE1M14122 | GAGE, CHECKING GO/NO GO | 2 | |
| IAE1M14137 | GAGE, CHECKING - GO/NO GO | 1 | |
| IAE1M14138 | GAGE, CHECKING - GO/NO GO | 1 | |
| J27081-1 | GAGE - GO/NO GO (J27081-6 ASSY INCLUDED IN J27081-1 RIGGING EQUIPMENT - OUTBOARD TRAILING EDGE FLAPS) USED ON 777-200LR, -300ER AND 777F AIRPLANES. | 2 | |
| J52041-1 | GAGE - GO/NO-GO, FORWARD CARGO DOOR RIGGING ADJUSTMENT TOOL | 1 | |
| K56004-1 | GAGE - GO/NO GO, WIPER END FITTING | 1 | |
| M22520/39-01 | CRIMP GAGE GO/NO-GO | 1 | |
| MB596269S | Go/No-go gage | 1 | |
| MB596270S | Go/No-go gage | 1 | |
| SR19GSD-A | GO/NO-GO GAGE , FAIRCHILD FASTENERS. | 1 | |
| SR25GSD-A | GO/NO-GO GAGE , FAIRCHILD FASTENERS. | 1 | |
| SR31GSD-A | GO/NO-GO GAGE , FAIRCHILD FASTENERS. | 1 | |
| SR37GSD-A | GO/NO-GO GAGE , FAIRCHILD FASTENERS. | 1 | |
| ST8709H | GO/NO-GO GAGE - FOR ASSEMBLY OF WIGGINS BACC42R COUPLING | 2 | |
| ST8709H-1 | GO/NO-GO GAGE | 2082 | |
| ST8709H-4 | GAGE - GO/NO-GO, FUEL WIGGINS COUPLING | 2082 | |
| ST8709H-4-A | GAGE - GO/NO-GO, FUEL WIGGINS COUPLING | 2082 | |
| ST8709H-KIT | GO/NO-GO GAGE FOR ASSEMBLY OF WIGGINS BACC42R COUPLING | 1 | |
| ST8709H-X | GO/NO-GO GAGE | 1 | |
| ST8725D | GO/NO-GO GAGE | 1 | |
| T01001418 | MD11 FWD CGO DOOR GO/NO GO GAGE | 1 | |
| T172-500 | T172-500 CHERRY AEROSPACE GO/NO-GO GAGE | 2082 | |
| WCI-FHG-A60-.3740 | NOM GO/NOGO/GAGE | 2082 | |
| WCI-FHG-A60-.3770 | NOM GO/NOGO/GAGE | 2082 | |
| WCI-FHG-A61-.3895 | 1ST GO/NOGO GAGE | 2082 | |
| WCI-FHG-A61-.3920 | 1ST GO/NOGO GAGE | 2082 | |
| WCI-FHG-A62-4050 | 2ND O.S. GO/NOGO GAGE | 2082 | |
| WCI-FHG-A62-4075 | 2ND O.S. GO/NOGO GAGE | 2082 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
