| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| AT265-31 | GEAR PLATE | 1 | |
| G34002-41 | GEAR PLATE | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) FIL3600 | PLATE, GEAR SUPPORT TRANSFER (CALIBRATION) (CALIBRATION) | 1 | |
| 11C3452 | PLATE - BLANK OFF - GEARBOX | 1 | |
| 11C3452G01 | PLATE, BLANK OFF - GEARBOX DRIVE PAD | 1 | |
| 11C4431 | PLATE - BLANK OFF - GEARBOX DRIVE PAD | 1 | |
| 2001752 | aircraft tire service trailer built to accommodate at least (2) aircraft tires, jacks, etc. Heavy duty chassis and running gear with 8000 lb. capacity and pneumatic tires. Diamond Plate Floor. Customization for specific aircraft tires available upon reque | 1 | |
| 294861-1 | BEARING REMOVAL ADAPTER (USED TO LOCATE IN LARGER ID OF 3860168I STARTER GEAR TO PROVIDE A PRESSING SURFACE WHEN PRESSING GEAR FROM 3860160-1 BALL BEARING. USE WITH PROTO PULLER 4214 AND 294870-4 BEARING REMOVAL PLATE) | 1 | |
| 294861-2 | BEARING REMOVAL ADAPTER (USED TO LOCATE IN SMALLER ID OF 38601681 STARTER GEAR TO PROVIDE A PRESSING SURFACE WHEN PRESSING GEAR FROM 3860160-1 BALL BEARING. USE WITH PROTO PULLER 4214 AND 294870-4 BEARING REMOVAL PLATE) | 1 | |
| 294867-1 | BEARING REMOVAL PLATE (SUPPORTS 3860173-1 BEARING WHEN REMOVING 3860181-1 SPUR GEAR FROM BEARING) | 1 | |
| 294870-2 | BEARING REMOVAL PLATE (SUPPORTS 358457 BEARING WHEN REMOVING 3860169-1 FAN SPUR GEAR FROM BEARINGS) | 1 | |
| 294870-3 | BEARING REMOVAL PLATE (SUPPORTS 358027 BEARING WHEN REMOVING 3860165-1 OIL PUMP SPUR GEAR FROM BEARING) | 1 | |
| 294870-4 | BEARING REMOVAL PLATE (USED TO SUPPORT 3860160-1 BEARING WHEN REMOVING 3860168-1 STARTER GEAR FROM BEARING) | 1 | |
| 294870-5 | BEARING REMOVAL PLATE (SUPPORTS 3605094-1 BEARING WHEN REMOVING 3860180-2 SPUR GEARSHAFT FROM BEARING) | 1 | |
| 294870-8 | BEARING REMOVAL PLATE (SUPPORTS 3605094-1 BEARING WHEN REMOVING 3860180-5, -6 SPUR GEARSHAFT FROM BEARING) | 1 | |
| 2MIT65B05413-1 | WRENCH - RETAINER, RESTRICTOR PLATE, NOSE LANDING GEAR | 1 | |
| 31-54149-1 | LOCK PLATE HORIZ. STAB. GEAR BOX | 1 | |
| 32-0492-002 | Standard, Cylinder, Landing Gear, B757/767, .375" Thick, 4340M per 7.26 CL1 - HEAT TREAT/STRESS RELIEF/CHROME PLATE to .015 | 1 | |
| 32-0492-004 | Standard, Cylinder, Landing Gear, B757/767, .400" Thick, 4340M per 7.26 CL1 - HEAT TREAT/STRESS RELIEF/CHROME PLATE to .015 | 1 | |
| 32-0492-006 | Standard, Cylinder, Landing Gear, B757/767, .425" Thick, 4340M per 7.26 CL1 - HEAT TREAT/STRESS RELIEF/CHROME PLATE to .015 | 1 | |
| 32-0492-008 | Standard, Cylinder, Landing Gear, B757/767, .450" Thick, 4340M per 7.26 CL1 - HEAT TREAT/STRESS RELIEF/CHROME PLATE to .015 | 1 | |
| 32-0492-010 | Standard, Cylinder, Landing Gear, B757/767, .475" Thick, 4340M per 7.26 CL1 - HEAT TREAT/STRESS RELIEF/CHROME PLATE to .015 | 1 | |
| 32-0492-012 | Standard, Cylinder, Landing Gear, B757/767, .500" Thick, 4340M per 7.26 CL1 - HEAT TREAT/STRESS RELIEF/CHROME PLATE to .015 | 1 | |
| 350A93-3316-20 | REMOVAL / INSTALLATION - CONTROL PLATE BEARING - TAIL GEAR BOX | 2 | |
| 350A93-3317-20 | REMOVAL / INSTALLATION - CONTROL PLATE BEARING - TAIL GEAR BOX | 2 | |
| 3862212-3 | APU GEARBOX COVERPLATE | 11 | |
| 4106T04P01 | ACCESSORY GEARBOX COVER PLATE | 1 | |
| 757004 | NAMEPLATE- GEARBOX | 1 | |
| 6796203 | PULLER PLATE - ACCESSORY MAIN DRIVE SHAFTGEAR BEARINGS | 2 | |
| 6796205 | PULLER PLATE - SIDE ACCESSORY DRIVE SHAFT GEAR BEARINGS | 3 | |
| 6796214 | PULLER PLATE, ST. IDLER GEAR BRG | 2 | |
| 6796215 | PULLER PLATE, ST. IDLER GEAR BRG | 2 | |
| 6796930 | Plate â Installation, Accessory Gear Box Bearing | 2 | |
| 6797032 | INDEX PLATE - PLANET GEAR | 1 | |
| 6872758 | TEMPLATE GEARBOX HOUSING AND COVER BEARING BORE | 1 | |
| 6893515 | PLATE, PULLER 12MM X 37MM X 12MM BEARING ACCESSORIES GEAR BOX | 2 | |
| 6893517 | PLATE- 12 Plate â 12mm x 28mm x 8mm Bearing Puller, Accessory Gear Box | 2 | |
| 6893521 | PLATE, 15MM X 42MM X 13MM BEARING PULLER, ACCESS GEAR BOX | 2 | |
| 6893525 | Plate â Installation, Accessory Gear Box Bearings | 2 | |
| 856A2734 | BASEPLATE, SUPPORT AGB GEAR | 1 | |
| 856A2734G01 | BASEPLATE, SUPPORT - AGB GEARSHAFTS (SUPPORT BASEPLATE) | 6 | |
| 856A2738G02 | BASEPLATE, SUPPORT AGB GEARSHAFTS | 2 | |
| 856A3565 | BASEPLATE SUPT AGB GEARSHAFT | 1 | |
| 856A3565 G02 | Baseplate Support ‐ AGB Gearshafts | 1 | |
| 856A3565G03 | BASEPLATE SUPT AGB GEARSHAFT | 1 | |
| 856A3728 | ACCESSORY GEARBOX SEALING PLATE | 1 | |
| 85740007-S903-138 | TOOL-L/H GEAR TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 1 | |
| 85740007-S904-138 | TOOL-R/H GEAR TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 1 | |
| 85741000-003-138 | TOOL-LEFT GEAR TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 2 | |
| 85741000-004-138 | TOOL-RIGHT GEAR TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 2 | |
| 9441M30 | PLATE, PUSHER-BRGS. GEARS SHAFT | 1 | |
| 9441M30 REV A | PLATE, PUSHER-BRGS. GEARS SHAFT | 1 | |
| 9441M32 | PLATE, PUSHER-BRGS. GEARS SHAFT | 1 | |
| 9441M32 REV B | PLATE, PUSHER-BRGS. GEARS SHAFT | 1 | |
| 98A32101003000 | PLATES-PROTECTIVES MAIN GEAR WHEEL BEARINGS | 1 | |
| 98A32201006000 | PLATES PROTECTIVES,NOSE GEAR WHEEL BEARING | 1 | |
| AT200-26A | IDLER GEAR PLATE WITH PINS | 1 | |
| B32053-1 | CONTOUR TEMPLATE - NOSE LANDING GEAR (NLG) DOOR | 4 | |
| F65-0-3098-41 | Detail 41 (DLD Cover Plate), Nose Gear Steering Test Fixture | 1 | |
| F72761 | WRENCH -0 MAIN GEAR ORIFICE PLATE TORQUE USED TO | 1 | |
| F80032-1 | ADAPTER - WRENCH, MAIN GEAR SHOCK STRUT ORIFICE PLATE | 7 | |
| GSB2712006 | TOOL-L/H GEAR TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 1 | |
| GSB2712007 | TOOL-R/H GEAR TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 1 | |
| GSB2715001 | TOOL-LEFT GEAR TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 3 | |
| GSB2715002 | TOOL-RIGHT GEAR TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 2 | |
| HU55989 | PLATE ADAPTER - R I GEARBOX UNITS | 5 | |
| J32054-71 | EQUIPMENT, COVER PLATE, LANDING GEAR TORION LINK | 3 | |
| M46196 | MOUNTING & ADJUST PLATE FOR NWS GEARBOX | 6 | |
| MIT65B01471 | WRENCH - RESTRICTOR RETAINER PLATE, NOSE LANDING GEAR | 2 | |
| PWA211440 | GEARBOX COVER AND PLATE/PLUGS SET | 1 | |
| PWA25211 | PLATE - AGB T/SHFT SPURGEAR BRG_[PWA25211] | 2 | |
| PWA25213 | PLATE - AGB SPURGEAR BEARING_[PWA25213] | 2 | |
| PWA81351 | PULLER - GEARBOX COVER PLATE | 1 | |
| PWA85274 | PLATE - DISASSEMBLY, GEARBOX ROLLER BEARING INNER RACE, PMA | 1 | |
| PWA86345 | PLATE - DISASSEMBLY, GEARBOX, ROLLER BEARING INNER RACE (VARIOUS) | 1 | |
| PWC30225 | PLATE, GEARBOX | 3 | |
| RB T101335 | Transmission 42 And 90 Degree Gearbox Holding Plate | 1 | |
| RB T101949 | Tail Rotor Gearbox Plate Set | 2 | |
| RB T101961 | Input Gear Bearing Removal Plate | 1 | |
| RB T103226-101 | PLATE, 90 DEGREE GEARBOX | 2 | |
| RB6796930 | Accessory Gear Box Install Plate | 2 | |
| RB6893515 | Plate, Puller 12Mm X 37Mm X 12Mm Bearing Accessories Gear Box | 2 | |
| RB6893517 | Plate, Puller 12Mm X 28Mm X 8Mm Bearing Accessories Gear Box | 2 | |
| RB6893521 | Plate, 15Mm X 42Mm X 13Mm Bearing Puller, Access Gear Box | 1 | |
| RB6893525 | Plate, Installation Access Gear Box Bearings | 2 | |
| RRT058147 | GEARBOC CRADLE ADAPTOR PLATE | 2 | |
| SP66516 | IDLER GEAR PLATE | 1 | |
| T103226-101 | PLATE, 90 DEGREE GEARBOX | 1 | |
| TB9061G001 | GEARBOX BEARINGS SPLIT PLATE | 1 | |
| TMP00218 | MARKING TEMPLATE, RING GEAR | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
