| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| J32043-119 | GEAR FIXTURE | 7 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| -343 | FIXTURE - TRANSPORTATION, MAIN LANDING GEAR, REMOVAL/INSTALLATION | 8 | |
| 100-47813 | GEAR LOCK FIXTURE, PRESSURE TEST | 1 | |
| 100-47827 | GEAR MOTOR TORQUING FIXTURE | 1 | |
| 100-48576 | SUPPORT FIXTURE, GEAR MOTOR | 1 | |
| 10C1042G01 | Fixture remove instal accessory gearbox drive shaft | 1 | |
| 10C1066G03 | Fixture,lift-accessory gearbox module,vertical | 1 | |
| 10C1103G01 | FIXTURE, CLAMPING - NO. 3 BEARING ASSEMBLY, INLET GEARBOX (CLAMPING FIXTURE) | 1 | |
| 10C1155G02 | FIXTURE, SEATING CHECK - CORE MODULE TO INLET GEAR BOX (SEATING CHECK FIXTURE) (RECOMMENDED) | 1 | |
| 10C1253G01 | FIXTURE, PULLER-ACCESSORY GEARBOX SCAVANGE SCREENS | 3 | |
| 11C3262G04 | FIXTURE - ACCESSORY GEARBOX (AGB), REMOVAL/INSTALLATION | 1 | |
| 11C3268 | FIXTURE - LIFT - ACCESSORY GEARBOX | 1 | |
| 11C3268G01 | Fixture, Lift - Accessory Gearbox Module | 1 | |
| 11C3336 | FIXTURE - SUPPORT-TRANSFER GEARBOX | 1 | |
| 11C3336G01 | FIXTURE, SUPPORT - TRANSFER GEARBOX | 1 | |
| 11C4664 | FIXTURE - RAISE/LOWER ACCESORY GEAR BOX MODULE | 1 | |
| 11C4665 | FIXTURE - INSTALL/REMOVE-ACCESSORY GEARBOX MODULE | 1 | |
| 11C4665G01 | Fixture,install/remove-accessory gearbox module | 1 | |
| 18C1535G01 | Fixture Backlash-Bevel Gear | 1 | |
| 1C6855G01 | FIXTURE,LIFT-ACCESSORY GEARBOX | 1 | |
| 1C6872 | FIXTURE, INST. & REMOAL- ACCESS GEARBOX HORIZ | 1 | |
| 1C6872G01 | FIXTURE, INSTALLATION/REMOVAL, GEARBOX ASSY | 1 | |
| 1C6872G01 | FIXTURE LIFT-ACCESSORY GEARBOX | 1 | |
| 1C6874 | FIXTURE LIFT - ACCESSORY GEAR | 1 | |
| 1C6874G01 | FIXTURE LIFT - ACCESSORY GEAR | 1 | |
| 70742 | SUN GEAR LIFTING FIXTURE | 1 | |
| 6796345 | FIXTURE - BORING, PINION GEAR BUSHING | 2 | |
| 6796937 | FIXTURE - CHECK, PINION GEAR BUSHING CONCENTRICITY | 2 | |
| 6797589 | FIXTURE – BENDING, SUN GEAR HUB LOCK TAB | 2 | |
| 6797590 | SIDE GEAR CHECKING FIXTURE | 2 | |
| 6798239 | Fixture â Holding, Tach Drive Idler Gear | 2 | |
| 6799596 | SHAFT GEAR OIL SEAL FIXTURE - INSTALLATION, SPEED | 2 | |
| 6799765 | FIXTURE - ALIGNMENT, REDUCTION GEAR EYEBOLT | 2 | |
| 6872880 | FIXTURE----CHECKING, COMPRESSOR MOUNTING INSERTS (GEARBOX) | 1 | |
| 6889888 | GEAR BOX/ENGINE LIFT FIXTURE | 4 | |
| 23051176 | Fixture – Assembly, Spur Assembly Gear-shaft | 2 | |
| 285701-1-1 | Gear Drilling Fixture | 1 | |
| 287912-1 | FIXTURE CHECKING GEAR BACKLASH | 1 | |
| 291985-1 | GEARSHAFT NUT TORQUING FIXTURE | 1 | |
| 293824-1 | BORING MACHINE GEAR BOX HOLDING FIXTURE | 1 | |
| 2960A0000-01 | FIXTURE, LDG GEAR ASSY(GSE343) 190 | 3 | |
| 296725-1 | FIXTURE SPLITTER GEARBOX TORQUING | 1 | |
| 298029-1 | GEARBOX HANDLING FIXTURE (TO HOLD GEARBOX STABLE FOR REMOVAL OR INSTALLATION) | 1 | |
| 298057-1 | GEARBOX HANDLING FIXTURE | 1 | |
| 298106-2 | PLANET GEAR HOLDING AND INDEXING FIXTURE | 1 | |
| 2AJ65B81120 | ASSEMBLY FIXTURE - ANGLE GEARBOX ASSEMBLY, TRAILING EDGE FLAP DRIVE | 1 | |
| 2AJ65B81121 | ASSEMBLY FIXTURE - ANGLE GEARBOX ASSEMBLY TRAILING EDGE FLAP DRIVE | 1 | |
| 2AJ65B81130 | ASSEMBLY FIXTURE - ANGLE GEARBOX ASSEMBLY TRAILING EDGE FLAP DRIVE | 1 | |
| 2AJ65B81131 | ASSEMBLY FIXTURE - ANGLE GEARBOX ASSEMBLY TRAILING EDGE FLAP DRIVE | 1 | |
| 2C14083G01 | FIXTURE, LIFT - ACCESSORY GEARBOX | 1 | |
| 2C14107 | FIXTURE-R/I ACCESSORY GEARBOX DRIVE SHAFT | 1 | |
| 2C14107 REV D | FIXTURE, REMOVE/INSTALL ACCESS. GEARBOX DRIVE SHAFT | 1 | |
| 2C14107G01 | FIXTURE, REMOVE/INSTALL - ACCESSORY GEARBOX DRIVE SHAFT (FIXTURE) | 13 | |
| 2C14124 | FIXTURE, SEAL/PRESSURIZE ACCESS. GEARBOX | 1 | |
| 2C14124 REV D | FIXTURE, SEAL/PRESSURIZE ACCESS. GEARBOX | 1 | |
| 2C14124G02 | FIXTURE, SEALPRESSURE-ACCESSORY GEAR BOX | 6 | |
| 2C14137G01 | TOOL - FIXTURE, ACCESSORY GEAR BOX (AGB) MATING RING INSTALL | 10 | |
| 2C14137G02 | TOOL - FIXTURE, ACCESSORY GEAR BOX (AGB) MATING RING INSTALL | 8 | |
| 2C14138 | FIXTURE, REMVL-MATING SEAL RINGS - ACCESS GEARBOX | 1 | |
| 2C14138 REV B | FIXTURE, REMOVAL-MATING SEAL RINGS - ACCESS. GEARBOX | 1 | |
| 2C14138G01 | FIXTURE REMOVAL MATING SEAL RINGS ACC GEARBOX CF6-80C2 | 11 | |
| 2C14138G02 | FIXTURE REMOVAL MATING SEAL RINGS ACC GEARBOX CF6-80C2 | 14 | |
| 2C14644 | FIXTURE, INSTALL/REMOVE ACCESS. GEARBOX MODULE | 1 | |
| 2C14644 REV K | FIXTURE, INSTALL/REMOVE ACCESS. GEARBOX MODULE | 1 | |
| 2C14645 | FIXTURE,LIFT-ACCESSORY GEARBOX | 1 | |
| 2C14712G01 | FIXTURE – R&I, ACCESS GEARBOX DRIVE SHAFT | 8 | |
| 2C14725G01 | FIXTURE LIFT, INLET GEARBOX | 1 | |
| 2C6123G03 | GEAR BOX FIXTURE | 2 | |
| 2C6863G01 | fixture lift inlet gearbox | 1 | |
| 2C6908G01TK | FIXTURE, ALIGNMENT, GEARBOX TUBING | 1 | |
| 2C6998G05 | FIXTURE SET REMOVAL MATING SEAL RINGS-ACCESORY GEARBOX | 2 | |
| 2C81182G01 | Fixture measuring shim thickness bevel gear pto | 1 | |
| 2C81600G02 | Fixture,measuring,bevel gear backlash ptd | 1 | |
| 2C81631G01 | Fixture, Holding Bevel Gear Pto | 1 | |
| 2C91031G01 | Fixture Accessory Drive Gearbox (AGB) Positionning | 1 | |
| 2TSJ65B01539-1 | TEST FIXTURE - ACTUATOR, TRUCK POSITIONER, WING LANDING GEAR | 1 | |
| 3402900-1 | MAIN LANDING GEAR TIEDOWN FIXTURE | 1 | |
| 3403264-1 | MAIN LANDING GEAR TIEDOWN FIXTURE | 1 | |
| 35004-0-2000 | Gear Press Fixture | 1 | |
| 350A93322400 | TOOL PLANET GEAR BOX FIXTURE | 1 | |
| 369A5107-3 | HOLDING FIXTURE INPUT GEAR "C" MODEL MAIN ROTOR | 1 | |
| 369D29915 | OUTPUT GEARSHAFT HOLDING FIXTURE | 1 | |
| 3TSJ65B01503-1 | TEST FIXTURE - ACTUATOR ASSEMBLY, NOSE LANDING GEAR STEERING | 2 | |
| 4920015155251 | FIXTURE - ALIGNMENT, ACCESSORY GEARBOX(856A3709G02) | 1 | |
| 4MIT65B82591 | TORQUE FIXTURE - PISTON, STEERING ACTUATOR, NOSE LANDING GEAR | 1 | |
| 5213A0000-01 | FIXTURE, LDG GEAR ASSY(GSE348)EMB | 3 | |
| 57949A0000-01 | FIXTURE,HOLDING,NOSE LANDING GEAR | 2 | |
| 57949A0000‐01 | FIXTURE,HOLDING,NOSE LANDING GEAR | 2 | |
| 5916803-1 | FIXTURE, MAIN LANDING GEAR DAMPER CHECK | 8 | |
| 59197A0000-01 | GSE 343 LANDING GEAR ASSEMBLY FIXTURE FOR E175 | 1 | |
| 5MIT65B01503 | TORQUE FIXTURE - STEERING ACTUATOR PISTON, NOSE LANDING GEAR | 2 | |
| 68920-652 | GEARWHEEL POSITIONING FIXTURE | 1 | |
| 735-10412 | GEAR ALIGNMENT FIXTURE | 1 | |
| 830006-809-00671 | ARBOR PRESS FIXTURE TAIL ROTOR GEARBOX HOUSING | 1 | |
| 830006-809-00682 | ASSEMBLY & DISASSEMBLY FIXTURE GEARBOX BEV/PIN | 1 | |
| 831354-1 | SUN GEAR REMOVAL FIXTURE | 1 | |
| 833129-1 | BEARING AND GEAR REMOVAL FIXTURE | 1 | |
| 833207-1 | TOOL - ALIGNMENT, BEARING GEAR FIXTURE | 2 | |
| 833477-1 | PLANETARY GEAR TIMING FIXTURE | 1 | |
| 834708-1 | LIFTING FIXTURE GEAR BOX | 1 | |
| 835088-1 | Gear Removal Fixture | 1 | |
| 835807-1 | Gear Hub Assembly Fixture | 1 | |
| 835807-1A | Gear Holder Fixture | 1 | |
| 85414001-001-58 | CHECKING FIXTURE, GEAR LUG REPL, MLG | 1 | |
| 856A1050 | FIXTURE, INSPECT SHIMMING INLET GEAR BOX | 1 | |
| 856A1050 G04 | FIXTURE, INSPECT SHIMMING INLET GEARBOX | 5 | |
| 856A1050G01 | FIXTURE, INSPECT SHIMMING INLET GEAR BOX | 1 | |
| 856A1050G02 | FIXTURE, INSPECT SHIMMING INLET GEAR BOX | 1 | |
| 856A1050G03 | FIXTURE, INSPECT SHIMMING INLET GEAR BOX | 1 | |
| 856A1050G04 | FIXTURE, INSPECT SHIMMING INLET GEAR | 5 | |
| 856A1050G05 | FIXTURE, INSPECT SHIMMING INLET GEARBOX | 1 | |
| 856A1211 | FIXTURE, CLAMPING-NO.3 BRG. ASSY. INLET GEARBOX | 1 | |
| 856A1211 REV B | FIXTURE, CLAMPING-NO.3 BRG. ASSY. INLET GEARBOX | 1 | |
| 856A1211G01 | Fixture, Clamping - No. 3 Bearing Assembly, Inlet Gearbox (clamping fixture) | 9 | |
| 856A1291 | FIXTURE, INSTALL & REMOVE - INLET GEAR - BOX MODULE | 1 | |
| 856A1291 G05 | FIXTURE, INSTALL & REMOVE - INLET GEARBOX MODULE | 1 | |
| 856A1291 G06 | Fixture Install and Remove ‐ Inlet Gearbox | 3 | |
| 856A1291G01 | FIXTURE, INSTALL & REMOVE - INLET GEAR - BOX MODULE | 1 | |
| 856A1291G02 | FIXTURE, INSTALL & REMOVE - INLET GEAR - BOX MODULE | 1 | |
| 856A1291G03 | FIXTURE, INSTALL & REMOVE - INLET GEAR - BOX MODULE | 1 | |
| 856A1291G04 | FIXTURE, INSTALL & REMOVE - INLET GEAR - BOX MODULE | 1 | |
| 856A1291G05 | FIXTURE, INSTALL & REMOVE - INLET GEARBOX MODULE | 1 | |
| 856A1291G06 | FIXTURE, INSTALL & REMOVE - INLET GEAR - BOX MODULE | 3 | |
| 856A1291G07 | FIXTURE, INSTALL & REMOVE - INLET GEAR - BOX MODULE | 1 | |
| 856A1291G08 | FIXTURE, INSTALL AND REMOVE-INLET GEARBOX MODULE | 8 | |
| 856A1291G09 | FIXTURE, INSTALL AND REMOVE - INLET GEARBOX MODULE (INSTALL AND REMOVE FIXTURE) | 4 | |
| 856A1291G10 | FIXTURE, INSTALL & REMOVE - INLET GEAR - BOX MODULE | 7 | |
| 856A1291G35 | FIXTURE, INSTALL AND REMOVE - INLET GEARBOX MODULE | 1 | |
| 856A1291P34 | Gear/Fixture IGB Model I/R | 1 | |
| 856A1291P35 | FIXTURE, INSTALL AND REMOVE - INLET GEARBOX MODULE | 4 | |
| 856A1392G03 | Fixture, Pusher-HPC FWD Shaft/IGB Bevel Gear Shaft | 3 | |
| 856A1395G02 | Fixture Lift-Inlet Gearbox And Lift Fixture | 1 | |
| 856A2008 | GEARBOX LIFT FIXTURE | 1 | |
| 856A2562G02 | FIXTURE, RIGGING - ACCESSORY GEARBOX MODULE | 1 | |
| 856A2618G04 | FIXTURE, INSTALL AND REMOVE - INLET GEARBOX MODULE | 11 | |
| 856A2733 | FIXTURE, LOCK HORZ GEAR | 1 | |
| 856A2733G03 | FIXTUJE, LOCKING - HORIZONTAL BEVET GEAR (LOCKING FIXTURE) | 3 | |
| 856A2733G04 | HORIZONTAL LOCKING FIXTURE - BEVEL GEAR TGB | 1 | |
| 856A2739 | FIXTURE, LOCK INPUT GEAR | 1 | |
| 856A2739G03 | Fixture, Locking - Input Bevel Gear (locking fixture) | 3 | |
| 856A2748G03 | FIXTURE, CHECKING, BACKLASH- TGB, DUO BEVEL GEARS | 4 | |
| 856A2798 | LOCKING FIXTURE AND SOCKET - AGB 31/71-TOOTH GEARSHAFT BALL BEARING NUT LOCKING (FIXTURE AND SOCKET) | 1 | |
| 856A2798G01 | LOCKING FIXTURE AND SOCKET- AGB 31/71-TOOTH GEARSHAFT BALL BEARING NUT | 5 | |
| 856A2873G01 | INSTALLATION FIXTURE - OIL DISTRIBUTOR GEAR 61 TOOTH | 2 | |
| 856A3127 | FIXTURE, LOCKING - HORIZONTAL BEVEL GEAR, TGB (LOCKING FIXTURE) | 1 | |
| 856A3142 | FIXTURE, LOCKING - INPUT BEVEL GEAR, TGB (LOCKING FIXTURE) | 1 | |
| 856A3183 | FIXTURE, ASSEMBLY/DISASSEMBLY - NO. 3 GEARSHAFT CONTROL ALTERNATOR | 1 | |
| 856A3193 | FIXTURE, ASSEMBLY/DISASSEMBLY - NO. 3 GEARSHAFT ASSEMBLY, AGB | 1 | |
| 856A3193G01 | Fixture Assy/Dis Assy No3 Gearshaft | 1 | |
| 856A3294 | FIXTURE, LOCKING - STARTER BEVEL GEAR, TGB (LOCKING FIXTURE) | 1 | |
| 856A3294G01 | Fixture, locking Starter Bevel Gear | 1 | |
| 856A3411 | FIXTURE, LOCKING - SPACER, INPUT BEVEL GEAR, TGB (LOCKING FIXTURE) | 1 | |
| 856A3412 | FIXTURE, LOCKING - OIL DISTRIBUTOR, HORIZONTAL BEVEL GEAR, TGB (LOCKING FIXTURE) | 1 | |
| 856A3545G03 | FIXTURE ACCESSORY GEARBOX | 9 | |
| 856A3545G04 | FIXTURE, RIGGING - ACCESSORY GEARBOX | 1 | |
| 856A3546 | Fixture, Checking Backlash - TGB Bevel Gear | 1 | |
| 856A3546G01 | FIXTURE, CHECKING. BACKLASH - TGB BEVEL GEAR DUO | 1 | |
| 856A3546G02 | FIXTURE, CHECKING. BACKLASH - TGB BEVEL GEAR DUO | 1 | |
| 856A3546G03 | FIXTURE, CHECKING. BACKLASH - TGB BEVEL GEAR DUO | 1 | |
| 856A3546G04 | FIXTURE, CHECKING. BACKLASH - TGB BEVEL GEAR DUO | 1 | |
| 856A3546G05 | FIXTURE, CHECKING. BACKLASH - TGB BEVEL GEAR DUO | 1 | |
| 856A3546G06 | Fixture Check Backlash Duo Bevel Gear TGB | 4 | |
| 856A3546G07 | FIXTURE, CHECKING. BACKLASH - TGB BEVEL GEAR DUO | 1 | |
| 856A3553 G03 | Fixture Locking ‐ Horizontal and Input Bevel Gear | 1 | |
| 856A3553G03 | Fixtures,locking input and horizontal bevel gears tgb | 1 | |
| 856A3709G01 | FIXTURE - ALIGNMENT, ACCESSORY GEARBOX | 5 | |
| 856A3709G02 | FIXTURE - ALIGNMENT, ACCESSORY GEARBOX | 11 | |
| 856A3709G03 | ACCESSORY GEARBOX ALIGNMENT FIXTURE | 7 | |
| 856A3855 | FIXTURE GEARBOX | 1 | |
| 856AI2II | FIXTURE, CLAMPING-NO.3 BRG. ASSY. INLET GEARBOX | 1 | |
| 8C2583 | FIXTURE, BUILD & INSTALL/REMOVE - ACCESSORY GEARBOX | 1 | |
| 8C2587 | TOOL SET, LIFTING FIXTURE - ACCESSORY GEARBOX | 1 | |
| 8C2587G01 | Tool set,lifting fixture-accessory gearbox | 1 | |
| 8C2651G01 | Fixture，raise/lower-accesory gearbox module | 1 | |
| 8C3638 | FIXTURE - SHAFT - IGBX - GEARSHAFT - HORIZONTAL | 1 | |
| 8C3638G01 | Fixture,shaft-igbx,gearshaft horizontal | 1 | |
| 9441M34 | FIXTURE-BACKLASH CHK. RADIAL BEVEL GEAR | 1 | |
| 9441M34 REV E | FIXTURE-BACKLASH CHK. RADIAL BEVEL GEAR | 1 | |
| 9441M43 | FIXTURE, ASSY. BRGS. TO GEARS | 1 | |
| 9441M43 REV C | FIXTURE, ASSY. BRGS. TO GEARS | 1 | |
| 9446M57 | FIXTURE, RAISE/LOWER - ACCESSORY GEARBOX MODULE FIXTURE | 1 | |
| 9446M57P03 | FIXTURE - RAISE/LOWER, ACCESSORY GEARBOX MODULE | 1 | |
| 9461M12G01 | Fixture,torque-loading transfer&inlet gearbox | 1 | |
| 9471M26G01 | Fixture raise lower accessory gearbox | 1 | |
| 9480M04 | FIXTURE, BACKLASH - TRANSFER GEARBOX | 1 | |
| 9480M58G02 | Fixture, Backlashtransfer Gearbox | 1 | |
| 9480M78G01 | FIXTURE, BACKLASH – HORIZONTAL & RADIAL BEVEL GEARS, INLET GEARBOX | 1 | |
| 9485M28 | FIXTURE, PRESSURE TEST - ACCESSORY GEARBOX | 1 | |
| 956A1315 | FIXTURE - SEATING CHECK - CORE MODULE TO INLET GEAR BOX | 1 | |
| 956A1315G01 | Fixture,seating check-core module to inlet gear box | 1 | |
| 956A1523 | FIXTURE - TORQUE - LOCKNUT - RADIAL BEVEL GEAR | 1 | |
| 956A1523G02 | Fixture,torque-locknut,radial bevel gear | 1 | |
| 956A1560 | FIXTURE - SHIPPING - INLET GEAR BOX | 1 | |
| 956A1560G01 | Fixture,dhipping-inlet gear box | 1 | |
| 956A3500 | FIXTURE - HEATING-INLET GEARBOX | 1 | |
| 956A3533 | FIXTURE - BUILD - HORIZ BEVEL GEAR | 1 | |
| 956A3533G01 | Fixture,build-horizontal bevel gear | 1 | |
| 956A6017 | FIXTURE - LIFTING - TRANSFER GEAR BOX | 1 | |
| 956A6017G03 | Fixture Lifting-Transfer Gear Box | 1 | |
| 956A6021 | TRANSFER-GEARBOX PISTON-RING-INSTALLATION FIXTURE | 1 | |
| 956A6021G01 | TRANSFER-GEARBOX PISTON-RING-INSTALLATION FIXTURE | 1 | |
| 956A6151G01 | Fixture lift-internal gear box | 1 | |
| 956A6151G02 | Fixture lift-internal gear box | 1 | |
| 956A6217 | FIXTURE - LOCKING - BEVEL GEAR | 1 | |
| 956A6221 | FIXTURE - LOCKING - BEVEL GEAR | 1 | |
| 956A6229 | FIXTURE - LOCKING - BEVEL GEAR | 1 | |
| 956A6260 | FIXTURE - LOCKING - SPUR GEAR | 1 | |
| 956A6603 | FIXTURE -INSTALL - ACCESSORY GEARBOX | 1 | |
| 956A7009 | FIXTURE - MANUAL ORIENTATION - RADIAL SHAFT - TRANSFER GEARBOX | 1 | |
| 956A7009P01 | Fixture,manual orientation-radial shaft,transfer gearbox outillage dorientation arbre radial boite de transfert | 1 | |
| 956A7010 | FIXTURE - PREPARATION - TRANSFER GEAR BOX | 1 | |
| 956A7010G02 | Fixture,preparation-transfert gear box | 1 | |
| 956A7018 | FIXTURE, REMOVE/INSTALL - ACCESSORY GEARBOX | 1 | |
| 956A7018G02 | FIXTURE, LIFT - ACCESSORY GEARBOX | 4 | |
| 956A7601 | FIXTURE - ASSEMBLY STAND - ACCESSORY GEARBOX | 1 | |
| 956A7602 | FIXTURE - LIFT - ACCESSORY GEARBOX | 1 | |
| 956A7602G01 | Fixture,lift-accessory gearbox elingue de levage agb | 1 | |
| 956A7607 | FIXTURE - LIFT BAR-ACCESSORY GEARBOX | 1 | |
| 956A7607G01 | Fixture,lift bar-accessory gearbox | 1 | |
| 956A8044 | FIXTURE - LIFT AND TURN - TRANSFER GEAR BOX | 1 | |
| 956A8044G01 | Fixture,lift and turn transfer gear box | 1 | |
| 956A8145 | FIXTURE - TORQUING-INLET GEAR BOX | 1 | |
| 956A8927 | FIXTURE - BACKLASH - BEVEL GEAR - TGB | 1 | |
| 956A8979 | FIXTURE - BACKLASH - BEVEL GEAR -AGB | 1 | |
| 96400-0-2000 | Gear Press Fixture | 1 | |
| 96400-0-2000 PM | GEAR PRESS FIXTURE | 1 | |
| 9C1171G02 | Fixture,lift-accessory gearbox module | 1 | |
| 9C1172G03 | Fixture，install/remove-accessory gearbox module | 1 | |
| 9C1173G02 | FIXTURE - RAISE/LOWER, ACCESSORY GEARBOX MODULE | 1 | |
| 9C1385G01 | RAISE/LOWER ACCESSORY GEARBOX MODULE FIXTURE | 1 | |
| 9C1385G02 | FIXTURE - RAISE/LOWER, ACCESSORY GEARBOX MODULE | 1 | |
| 9MIT65B01211 | ASSEMBLY FIXTURE - SHOCK STRUT, WING LANDING GEAR, BODY LANDING GEAR AND NOSE LANDING GEAR | 2 | |
| A22004-1 | Checking Fixture - Autothrottle Gearbox | 5 | |
| A27048-1 | FIXTURE - CHECK, GEARBOX BACKLASH | 1 | |
| A27048-2 | FIXTURE - CHECK, GEARBOX BACKLASH | 1 | |
| A27048-3 | FIXTURE - CHECK, GEARBOX BACKLASH | 1 | |
| A27048-40 | FIXTURE - CHECK, GEARBOX BACKLASH | 1 | |
| A27049-1 | CHECK FIXTURE - LEADING EDGE SLAT ANGLE GEARBOX BACKLASH | 1 | |
| A27054-14 | FIXTURE-H0LDING, GEAR ASSEMBLY, LE SLAT DRIVE | 1 | |
| A27055-1 | FIXTURE - TRAILING EDGE FLAP DRIVE WORM GEAR SHIM THICKNESS | 1 | |
| A27119-1 | HOLDING FIXTURE EQUIPMENT - GEAR ASSEMBLY, LE SLAT DRIVE | 1 | |
| A32043-1 | TEST FIXTURE - ACTUATOR, MAIN LANDING GEAR (MLG) DOOR LATCH | 1 | |
| A32050-1 | TORQUE FIXTURE - ACTUATOR PISTON, MAIN LANDING GEAR (MLG) AND NOSE LANDING GEAR (NLG) | 2 | |
| A32058-1 | HOLDING FIXTURE - ACTUATOR LOCK, NOSE LANDING GEAR (NLG) | 1 | |
| A32063-7 | TEST FIXTURE - SIDE AND DRAG BRACE LOCK ACTUATOR, MAIN LANDING GEAR (MLG) | 1 | |
| A32064-1 | FIXTURE - TEST, MAIN LANDING GEAR (MLG) DOOR ARMING LOCKOUT ACTUATOR | 1 | |
| A32072-1 | FIXTURE - FUNCTIONAL TEST, NOSE LANDING GEAR STEERING ACTUATOR | 1 | |
| A32084-1 | HOLDING FIXTURE - PISTON ROD, NOSE LANDING GEAR (NLG) LOCK ACTUATOR | 1 | |
| A32087-1 | FIXTURE - HOLDING, MAIN LANDING GEAR RETRACT ACTUA | 1 | |
| A32087-12 | FIXTURE - HOLDING, MAIN LANDING GEAR RETRACT ACTUATOR | 1 | |
| A32089-1 | SWAGING FIXTURE - PISTON ROD, MAIN LANDING GEAR (MLG) | 1 | |
| A32121-1 | FIXTURE EQUIPMENT - LANDING GEAR ACTUATOR ASSEMBLIES | 2 | |
| A32122-1 | FIXTURE EQUIPMENT - RETRACT ACTUATOR, MAIN LANDING GEAR (MLG) | 1 | |
| A52017-1 | TEST FIXTURE - GEARBOX, OVERHEAD PASSENGER DOOR COUNTERBALANCE | 1 | |
| B32026-1 | FIXTURE - STAKING, ACTUATOR, NOSE LANDING GEAR LOCK | 3 | |
| B32030-1 | FIXTURE - LOCK ACTUATOR, OVERHAUL EQUIPMENT, NOSE LANDING GEAR (NLG) | 3 | |
| B32039-134 | FIXTURE - FUNCTIONAL TEST, RETRACT ACTUATOR, LANDING GEAR | 1 | |
| B32039-135 | FIXTURE - FUNCTIONAL TEST, RETRACT ACTUATOR, LANDING GEAR | 3 | |
| B32039-135PM | FIXTURE - FUNCTIONAL TEST, RETRACT ACTUATOR, LANDING GEAR | 1 | |
| B32041-1 | TEST FIXTURE - TRUCK POSITION ACTUATOR, MAIN LANDING GEAR | 2 | |
| B32045 | LOCATING FIXTURE -0 VALVE, GEAR OPERATED | 1 | |
| B32045-1 | LOCATING FIXTURE - VALVE, GEAR OPERATED SEQUENCE, NOSE LANDING GEAR (NLG) | 3 | |
| B32045-11 | LOCATING FIXTURE - VALVE, GEAR OPERATED SEQUENCE, NOSE LANDING GEAR (NLG) | 4 | |
| B32045-11-ML | LOCATING FIXTURE-VALVE GEAR | 1 | |
| B32050-1 | ASSEMBLY FIXTURE - MAIN LANDING GEAR (MLG) | 1 | |
| B32050-50 | ASSEMBLY FIXTURE - MAIN LANDING GEAR (MLG) | 2 | |
| B32064 | RIGGING FIXTURE -0 MAIN LANDING GEAR DOOR | 1 | |
| B32064-1 | RIGGING FIXTURE - MAIN LANDING GEAR DOOR OPERATED SEQUENCE VALVE ASSEMBLY | 1 | |
| B32065 | TEST FIXTURE -0 MAIN LANDING GEAR DOWNLOCK | 1 | |
| B32065-1 | TEST FIXTURE - MAIN LANDING GEAR DOWNLOCK ACTUATOR | 1 | |
| B52010 | FIXTURE BACKLASH NO 1/2 DOOR MANUAL DRIVE GEARBOX ASSY | 1 | |
| B52010-1 | FIXTURE - BACKLASH, NUMBER 1 & 2 DOOR MANUAL DRIVE GEARBOX ASSEMBLY | 1 | |
| B71018 | HANDLING FIXTURE -0 HIGH SPEED GEARBOX, RB211- | 1 | |
| B71018-28 | HANDLING FIXTURE - HIGH SPEED GEARBOX, RB211-535 | 2 | |
| BOF65B00763 | BORING FIXTURE - BODY LANDING GEAR TRUNNION SUPPORT FITTING REWORK | 1 | |
| BOF65B07950 | BORING FIXTURE - TRUNNION FITTING ASSEMBLY, NOSE LANDING GEAR | 1 | |
| BOFAOGTOOL747LG0013 | BORING FIXTURE FITTING ASSEMBLY - TRUNNION, NOSE LANDING GEAR | 1 | |
| BOFAOGTOOL767LG6035 | BORING FIXTURE FITTING ASSEMBLY - TRUNNION, NOSE LANDING GEAR | 1 | |
| C27088-1 | Test Fixture - Hypoid Gear Backlash | 1 | |
| C32008-1 | Holding Fixture -Main Landing Gear Damper Assembly | 3 | |
| C32027-1 | Holding Fixture Equipment - Functional Test, Landing Gear Control Lever | 2 | |
| C32027-2 | Holding Fixture Equipment - Functional Test, Landing Gear Control Lever | 2 | |
| C32027-3 | Holding Fixture Equipment - Functional Test, Landing Gear Control Lever | 2 | |
| C32034 | FIXTURE - TRANSPORTATION, MAIN LANDING GEAR, REMOVAL/INSTALLATION | 2 | |
| C32034 -339 | FIXTURE - TRANSPORTATION, MAIN LANDING GEAR, REMOVAL/INSTALLATION | 11 | |
| C32034-211 | FIXTURE - TRANSPORTATION, MAIN LANDING GEAR, REMOVAL/INSTALLATION | 4 | |
| C32034-227 | SPL-1869 Fixture - Transportation, Main Landing Gear, Removal/Installation | 12 | |
| C32034-227 | FIXTURE, B767 GEAR | 12 | |
| C32034-273 | FIXTURE – TRANSPORTATION, MAIN LANDING GEAR, REMOVAL/INSTALLATION | 6 | |
| C32034-33 | FIXTURE – TRANSPORTATION, MAIN LANDING GEAR, REMOVAL/INSTALLATION | 1 | |
| C32034-339 | FIXTURE - TRANSPORTATION, MAIN LANDING GEAR, REMOVAL/INSTALLATION | 11 | |
| C32034-343 | FIXTURE - TRANSPORTATION, MAIN LANDING GEAR, REMOVAL/INSTALLATION | 7 | |
| C32034-9 | FIXTURE, MAIN LANDING GEAR, INSTALLATION AND REMOVAL | 10 | |
| C32036-1 | Fixture Equipment - Actuator Assemblies, Nose Landing Gear | 1 | |
| C32036-101 | FIXTURE EQUIPMENT - ACTUATOR ASSEMBLIES, NOSE LANDING GEAR | 1 | |
| C32036-45 | Fixture Equipment - Actuator Assemblies, Nose Landing Gear | 4 | |
| C32036-46 | Fixture Equipment - Actuator Assemblies, Nose Landing Gear | 4 | |
| C32036-88 | Fixture equipment-actuator assemblies，nose landing gear | 1 | |
| C32036-92 | FIXTURE EQUIPMENT - ACTUATOR ASSEMBLIES, NOSE LANDING GEAR | 7 | |
| C32037 | HOLDING FIXTURE MAIN LANDING GEAR | 1 | |
| C32037-1 | Holding Fixture - Main Landing Gear | 10 | |
| C32037-46 | HOLDING FIXTURE - MAIN LANDING GEAR | 1 | |
| C32045-23 | Holding Fixture - Seal Change, Main Landing Gear | 5 | |
| C32045-63 | HOLDING FIXTURE - SEAL CHANGE, MAIN LANDING GEAR | 4 | |
| C32046-1 | Holding Fixture Equipment - Shimmy Damper Assembly, Main Landing Gear | 10 | |
| C32046-25 | HOLDING FIXTURE EQUIPMENT - SHIMMY DAMPER ASSEMBLY, MAIN LANDING GEAR | 3 | |
| C32053-1 | Fixture Equipment - Side Strut Assembly, Main Landing Gear | 2 | |
| C32053-37 | FIXTURE EQUIPMENT - SIDE STRUT ASSEMBLY, MAIN LANDING GEAR | 5 | |
| C32053-41 | FIXTURE EQUIPMENT - SIDE STRUT ASSEMBLY, MAIN LANDING GEAR | 5 | |
| C32053-50 | FIXTURE EQUIPMENT - SIDE STRUT ASSEMBLY, MAIN LANDING GEAR | 1 | |
| C32063-1 | HOLDING FIXTURE - SEAL CHANGE, MAIN LANDING GEAR | 1 | |
| C32076-1 | DISASSEMBLY/ASSEMBLY FIXTURE - SHOCK STRUT, MAIN LANDING GEAR | 1 | |
| CF65B80934 | CHECK FIXTURE - OUTBOARD AILERON GEARBOX | 1 | |
| CF65B82986 | CHECK FIXTURE - BACKLASH CF65B82986 GEARBOX ASSEMBLY, INBOARD LEADING EDGE FLAP DRIVE | 1 | |
| CF65B83864 | CHECKING FIXTURE - ANGLE GEARBOX, TRAILING EDGE FLAP DRIVE | 1 | |
| CJMD327-100 | GEARBOX HOLDING FIXTURE | 2 | |
| CPWA-30482 | Fixture – Holding, Accessories Gear Box Coupling S | 1 | |
| DAH604105 | TEST FIXTURE-BRAKE ROD MAIN LANDING GEAR | 1 | |
| F-3501734-1 | OIL GEAR PUMP ASSEMBLY FIXTURE | 1 | |
| F2MA927522100 | MEASURING FIXTURE FOR FLAP INTERMEDIATE TRANSFER GEARBOX BACKLASH AND TORQUE | 1 | |
| F2MA927522200 | MEASURING FIXTURE FOR FLAP DUAL TRANSFER GEARBOX BACKLASH AND TORQUE | 1 | |
| F65-0-3098-29 | Detail 29, Nose Gear Steering Test Fixture | 1 | |
| F65-0-3098-41 | Detail 41 (DLD Cover Plate), Nose Gear Steering Test Fixture | 1 | |
| F65-0-3098-42 | Nose Gear Steering Test Fixture Detail 42 (Compensator Cap) | 1 | |
| F71263 | FIXTURE ASSY-AILERON GEARBOX TO HOLD THE | 1 | |
| F72770 | TEST FIXTURE -0 NOSE GEAR TRUNNION SWIVEL USED | 1 | |
| F72814 | FIXTURE ASSEMBLY -0 MAIN GEAR ACTUATOR TO | 1 | |
| F73003 | FIXTURE-NOSE LANDING GEAR BUILD-UP USED TO | 1 | |
| F80088-1 | HOLDING FIXTURE NOSE GEAR UPPER ORIFICE SUPPORT TU | 1 | |
| F80088-1 -3 | Holding Fixture -Upper Orifice Support Tube. Nose Gear | 1 | |
| F80088-3 | HOLDING FIXTURE - UPPER ORIFICE SUPPORT TUBE, NOSE GEAR | 2 | |
| F80096-1 | HOLDING FIXTURE - FORWARD TRUNNION BEARING HOUSING, MAIN GEAR | 2 | |
| F80096-1 -4 -7 | Holding Fixture -Forward Trunnion Bearing Housing. Main Gear | 1 | |
| F80096-4 | HOLDING FIXTURE - FORWARD TRUNNION BEARING HOUSING, MAIN GEAR | 10 | |
| F80096-7 | HOLDING FIXTURE - FORWARD TRUNNION BEARING HOUSING, MAIN GEAR | 7 | |
| F80174(-1) | TEST FIXTURE - MAIN LANDING GEAR SHOCK STRUT | 1 | |
| F80174-1 | Test Fixture - Main Landing Gear Shock Strut | 1 | |
| F80174-100 | Fixture -Main Landing Gear Shock Strut Test | 2 | |
| F80186-1 | ALIGNMENT FIXTURE TE FLAP DRIVE RIGHT ANGLE GEAR B | 1 | |
| F80186-10 | Alignment Fixture -Trailing Edge Flap Drive. Right Angle Gear Box | 7 | |
| FME65-73761 | HOLDING FIXTURE -0 MAIN LANDING GEAR | 5 | |
| G32030 | TEST FIXTURE -0 BRAKE ROD, MAIN LANDING GEAR | 1 | |
| G32030-120 | TEST FIXTURE - BRAKE ROD, MAIN LANDING GEAR (CE) | 1 | |
| G32030-121 | TEST FIXTURE - BRAKE ROD, MAIN LANDING GEAR (CE) | 1 | |
| G32030-122 | TEST FIXTURE - BRAKE ROD, MAIN LANDING GEAR (CE) | 3 | |
| G32035-1 | TEST FIXTURE - DOWNLOCK ACTUATOR, WING LANDING GEAR AND BODY LANDING GEAR | 1 | |
| G32071-1 | TEST SUPPORT FIXTURE - LANDING GEAR BLEEDER TOOL | 1 | |
| G32078-1 | TEST SUPPORT FIXTURE - LANDING GEAR BLEE | 6 | |
| GS15818-1 | DIFFERENTIAL GEAR SHIMMING FIXTURE | 1 | |
| GS22275-1 | IDLER INPUT GEAR CUP INSTALLING FIXTURE | 1 | |
| GS22312-1 | RIGHT HAND IDLER GEAR CUP INSTALLING FIXTURE | 1 | |
| GSE343 | LANDING GEAR ASSEMBLY FIXTURE FOR E175 | 1 | |
| HS7594 | FIXTURE-BLADE GEAR POSITIONING | 1 | |
| HU56215 | ADAPTER-FIXTURE ON GEARBOX TROLLEY | 1 | |
| IAE1J12362 | V2500 Internal Gearbox Fixture (EXT LEG SET ONLY) | 1 | |
| J27059-38 | CHECK FIXTURE EQUIPMENT - BACKLASH, LE SLAT ANGLE GEARBOXES | 1 | |
| J27080-1 | HOLDING FIXTURE - TE FLAP, ANGLE GEARBOX | 1 | |
| J32053-1 | FIXTURE EQUIPMENT - FUNCTIONAL TEST LANDING GEAR ACTUATOR | 1 | |
| J32053-129 | FIXTURE EQUIPMENT - FUNCTIONAL TEST LANDING GEAR ACTUATOR | 2 | |
| J32053-148 | FIXTURE EQUIPMENT, FUNCTIONAL TEST LANDING GEAR ACTUATOR | 1 | |
| J32053-92 | FIXTURE EQUIPMENT - FUNCTIONAL TEST LANDING GEAR ACTUATOR | 2 | |
| J32057-1 | FIXTURE EQUIPMENT - LANDING GEAR ACTUATOR ASSEMBLY | 1 | |
| J32057-108 | FIXTURE EQUIPMENT - LANDING GEAR ACTUATOR ASSEMBLY | 2 | |
| J32057-94 | FIXTURE EQUIPMENT - LANDING GEAR ACTUATOR ASSEMBLY | 1 | |
| J32067 | FIXTURE FUNCTIONAL TEST LANDING GEAR SPRINGS | 1 | |
| J32067-1 | FIXTURE - FUNCTIONAL TEST, LANDING GEAR SPRINGS | 1 | |
| J32067-155 | FIXTURE - FUNCTIONAL TEST, LANDING GEAR SPRINGS | 1 | |
| J32067-46 | FIXTURE - FUNCTIONAL TEST, LANDING GEAR SPRINGS | 1 | |
| J32067-85 | FIXTURE - FUNCTIONAL TEST, LANDING GEAR SPRINGS | 3 | |
| J32069-129 | BUILD-UP FIXTURE EQUIPMENT - OLEO STRUT, MAIN LANDING GEAR | 2 | |
| J32069-182 | BUILD-UP FIXTURE EQUIPMENT - OLEO STRUT, MAIN LANDING GEAR | 1 | |
| J32069-183 | BUILD-UP FIXTURE EQUIPMENT - OLEO STRUT, MAIN LANDING GEAR | 1 | |
| J32069-184 | BUILD-UP FIXTURE EQUIPMENT - OLEO STRUT, MAIN LANDING GEAR | 1 | |
| J32069-185 | BUILD-UP FIXTURE EQUIPMENT - OLEO STRUT, MAIN LANDING GEAR | 1 | |
| J32070 | BUILD UP FIXTURE EQPT. SHOCK STRUT NOSE LANDING GEAR | 1 | |
| J32070-59 | BUILD-UP FIXTURE EQUIPMENT - SHOCK STRUT, NOSE LANDING GEAR | 1 | |
| J32070-64 | BUILD-UP FIXTURE EQUIPMENT - SHOCK STRUT, NOSE LANDING GEAR | 1 | |
| J32080-1 | FIXTURE EQUIPMENT - HYDRAULIC STRUT, ACTUATOR ASSEMBLY, MAIN LANDING GEAR | 1 | |
| J32080-23 | FIXTURE EQUIPMENT - HYDRAULIC STRUT, ACTUATOR ASSEMBLY, MAIN LANDING GEAR | 1 | |
| J32089-1 | FIXTURE EQUIPMENT - HYDRAULIC STRUT, ACTUATOR ASSEMBLY, MAIN LANDING GEAR | 1 | |
| J32089-124 | FIXTURE EQUIPMENT - HYDRAULIC STRUT, ACTUATOR ASSEMBLY, MAIN LANDING GEAR | 2 | |
| J32107-1 | FIXTURE EQUIPMENT - SIDE STRUT ASSEMBLY, MAIN LANDING GEAR | 1 | |
| J32109-1 | FIXTURE EQUIPMENT - DRAG STRUT ASSEMBLY, MAIN LANDING GEAR | 1 | |
| J52023-1 | Backlash Fixture -Large Cargo Door. Manual Drive Gearbox | 1 | |
| J52028-1 | BACKLASH FIXTURE EQUIPMENT - MANUAL DRIVE GEARBOX, LATCH PDU, LARGE CARGO DOOR | 1 | |
| J52046-1 | Positioning fixture and strongback-main landing gear door | 1 | |
| J52046-2 | Positioning fixture and strongback-main landing gear door | 1 | |
| K32033-1 | BUILD-UP FIXTURE EQUIPMENT - SHOCK STRUT, NOSE LANDING GEAR | 3 | |
| K52019 | BACKLASH FIXTURE - LARGE CARGO DOOR MANUAL GEARBOX | 1 | |
| LTCT 2075 | HOLDING FIXTURE FOR SUN GEAR | 1 | |
| LTCT115 | GEAR HOLD FIXTURE | 1 | |
| LTCT14611-01 | Fixture, Holding, Bevel Gear and Backlash Gage | 1 | |
| LTCT14757-01 | Fixture Assembly, Pinion Gear Wrench and Torque | 1 | |
| LTCT14757-02 | Fixture Assembly, Pinion Gear Wrench and Torque | 1 | |
| LTCT14794-01 | Fixture, Holding, Air/Oil Separator Gear Wrench | 1 | |
| LTCT2048 | COMPRESSOR PINION GEAR HOLDING FIXTURE | 1 | |
| LTCT207 | FIXTURE,TEST,GEAR BOX | 1 | |
| LTCT2075 | HOLDING FIXTURE - SUN GEAR | 1 | |
| LTCT4996 | FIXTURE,HOLDING,GEAR | 1 | |
| LTCT5451 | OUTPUT GEAR HOLDING FIXTURE | 1 | |
| LTCT5709-01 | Fixture, Holding, Nut and Gear Shaft Wrench | 1 | |
| LTCT5769 | SPUR GEAR HOLDING FIXTURE | 1 | |
| LTCT5782-01 | Fixture, Holding, Gear | 1 | |
| LTCT7287-01 | FIXTURE, SPEED PICKUP GEAR TORQUE | 1 | |
| LTCT7467-01 | Fixture, Gearshaft Concentricity Gaging | 1 | |
| LTCT7699 | FIXTURE, HOLDING, SUN GEAR AFT | 1 | |
| LTCT7699-01 | Fixture, Holding, Sun Gear Aft | 1 | |
| LTCT7842 | Wrench and Holding Fixture, Nut and Gear Shaft | 1 | |
| MIT161U1000-991 | 747, MAIN GEAR SENSOR INSTALL & TEST FIXTURE | 1 | |
| MIT65B01290-1 | ASSEMBLY FIXTURE - UPLOCK ASSEMBLY, WING LANDING GEAR AND BODY LANDING GEAR | 1 | |
| NT984 | GEAR SELECTION FIXTURE | 1 | |
| OA-NBM-680 | LANDING GEAR FIXTURE, AIRCRAFT MAINT | 1 | |
| P35 | FIXTURE, INSTALL AND REMOVE - INLET GEARBOX MODULE (INSTALL AND REMOVE FIXTURE) | 1 | |
| PME65B01221-1 | SUPPORT FIXTURE - INNER CYLINDER, WING LANDING GEAR, BODY LANDING GEAR AND NOSE LANDING GEAR | 2 | |
| PWA104382 | FIXTURE HANDLING - ENGINE ASSEMBLY GEARBOX GROUP | 1 | |
| PWA111736 | FIXTURE FIXTURE, LIFT - MAIN GEARBOX AS | 1 | |
| PWA25968 | FIXTURE - NOZZLE ASSY, GEARBOX OIL FLOW_[PWA25968] | 2 | |
| PWA25970 | FIXTURE - NOZZLE ASSY, GEARBOX OIL FLOW_[PWA25970] | 2 | |
| PWA80575 | FIXTURE - HANDLING, GEARBOX GROUP - PW2000 ENGINES | 1 | |
| PWA80865 | FIXTURE, LEFT GEARING DRIVE | 1 | |
| PWA80866 | FIXTURE, RIGHT GEARING DRIVE | 1 | |
| PWA85123 | FIXTURE-HANDLING MAIN GEARBOX GROUP | 1 | |
| PWA86056 | FIXTURE - HANDLING, MAIN GEARBOX GROUP | 1 | |
| PWC37881 | FIXTURE, HOLDING LOWER ANGLE DRIVE GEARSHAFT | 1 | |
| PWC38681 | Fixture, Holding, Second Stage Reduction Idler Gear | 1 | |
| PWC38682 | Fixture, Holding, Second Stage Reduction Idler Gear | 1 | |
| PWC42189 | Fixture Starter gen gearshaft | 1 | |
| PWC43525 | FIXTURE LOADING GEARSHAFT | 1 | |
| PWC50353 | PRESS FIXTURE/GEARBOX | 1 | |
| PWC50681 | FIXTURE, GEAR BOX ASSY | 1 | |
| PWC55630 | FIXTURE-RGB GEAR TRAIN LOCKING | 5 | |
| PWC56097 | FIXTURE, LOADING, OIL PUMP DRIVE GEAR | 1 | |
| PWC56344 | FIXTURE, SECOND STAGE IDLER GEAR HOLDING, STARBOARD | 1 | |
| PWC58761 | GEARBOX ASSEMBLY FIXTURE | 1 | |
| PWC58840 | ASSEMBLY FIXTURE - GEARBOX | 1 | |
| PWC60613 | FIXTURE-HOLDING GEARSHAFT | 1 | |
| PWC70742 | SUN GEAR LIFTING FIXTURE | 1 | |
| RB T102076 | Quill Assembly Gear Holding Fixture | 3 | |
| RB T102079 | Main Input Gear Holding Fixture | 1 | |
| RB0006-809-00671 | Arbor Press Fixture Tail Rotor Gearbox Housing | 1 | |
| RB0006-809-00682 | Assembly & Disassembly Fixture Gearbox Bev/Pin | 1 | |
| RB6872880 | FIXTURE----CHECKING, COMPRESSOR MOUNTING INSERTS (GEARBOX) | 2 | |
| RBA5107-3 | Holding Fixture Input Gear "C" Model Main Rotor | 1 | |
| RBA5109-17 | Holding Fixture Output Gear "C" Model Main Rotor | 1 | |
| RBA5111-18 | Holding Fixture Output Gear "C" Model Tail Rotor | 1 | |
| RBD25121-30201 | Holding Fixture Input Gear | 1 | |
| RBD25125-30201 | Holding Fixture Output Gear | 1 | |
| RBD25430-30201 | Holding Fixture Gear Shaft Bev/Pin Output Tail Rotor | 1 | |
| RBT18801 | Tail Rotor Output Gear Holding Fixture Th55 | 1 | |
| SPL-10433 | FIXTURE - HANDLING, GEARBOX GROUP | 1 | |
| SPL-1869 | FIXTURE, MAIN LANDING GEAR, INSTALLATION AND REMOVAL | 1 | |
| SPL-5655 | TOOL-FIXTURE, ACCESSORY GEAR BOX MATING RING REMOV | 1 | |
| SPL-5656 | FIXTURE-REMOVAL, ACCESSORY GEAR BOX MATING RINGS | 1 | |
| SPL-9337 | Fixture - Torque, Actuator Piston, Landing Gear | 1 | |
| T102076 | QUILL ASSEMBLY GEAR HOLDING FIXTURE | 2 | |
| T103203-101 | XMSN GEARSHAFT FIXTURE | 1 | |
| TAF00458 | WORM GEAR HOLDING FIXTURE | 1 | |
| TAF00462 | WORM GEAR BUSHING ASSEMBLY FIXTURE | 1 | |
| TB7003G001 | GEARBOX LATCH ASSY FIXTURE | 1 | |
| TMA2361 | GEARSET INTALLATION FIXTURE | 1 | |
| TSJ65B01538-1 | TEST FIXTURE - UPLOCK ACTUATOR, MAIN LANDING GEAR | 2 | |
| TSJ65B01540-1 | TEST FIXTURE - DOWNLOCK ACTUATORS, WING LANDING GEAR AND BODY LANDING GEAR | 1 | |
| XPWA211110 | Fixture oil flow test main gearbox | 1 | |
| f 80186-10 | Aligmant Fixture T.E Flap Drive Right Angle Gear Box | 7 | |
| f80186-10 | Aligmant Fixture T.E Flap Drive Right Angle Gear Box | 7 | |
| lC6872 | FIXTURE, INST. & REMOAL- ACCESS GEARBOX HORIZ | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
