| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 856A3629P02 | GAGE INSPECT | 11 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 10008758 | INSPECTION GAGE | 1 | |
| 118-06 | GAGE BILT TOOL PART, SWAGE INSPECTION GAGE | 1 | |
| 19286-0370 | Imperium™ Cable Assembly Inspection Gage for Receptacle Harness Assembly Kits for 1/0 and 1 AWG cables, 171466 series. | 1 | |
| 1C6299 | GAGE, INSPECT - STATIONARY AIR | 1 | |
| 1C6299G01 | GAGE, INSPECT - STATIONARY AIR | 1 | |
| 1C9620 | GAGE - INSPECTION-FAN SHAFT | 1 | |
| 1C9620G01 | Gage Inspection - Fan Shaft To Hpt Stator Case | 1 | |
| 21C3751P02 | GAGE SET, INSPECTION | 1 | |
| 23005044 | GAGE SET, INSPECTION, TURBINE WHEEL CURVIC | 1 | |
| 270-00945 | DOOR OFFSET INSPECTION GAGE | 1 | |
| 270-00945-01 | DOOR OFFSTE INSPECTION GAGE | 1 | |
| 270-00945-02 | DOOR OFFSTE INSPECTION GAGE | 1 | |
| 2C14276 | GAGE, INSPECT. FAN SHAFT TO HPT STATOR CASE | 1 | |
| 2C14276 REV A | GAGE, INSPECT. FAN SHAFT TO HPT STATOR CASE | 1 | |
| 2C14276G01 | GAGE INSPECT - FAN S | 1 | |
| 2C14276G01TK | GAGE, INSPECTION-FAN SHAFT TO HPT STATOR CASE | 1 | |
| 2C14777G01 | GAGE, INSPECT HPT TR | 1 | |
| 2C6540 | (RT) GAGE, INSPECTION - | 1 | |
| 2C6540G01 | GAGE, INSPECT-COMPRESSOR ROTOR | 1 | |
| 2C6540G02 | GAGE INSPECTION COMP SPOOL | 1 | |
| 2C6541 | GAGE, INSPECT-COMPRESSOR ROTOR | 1 | |
| 2C6541G01 | GAGE, INSPECT-COMPRESSOR ROTOR | 1 | |
| 2C6542 | GAGE, INSPECT-COMPRESSOR ROTOR | 1 | |
| 2C6542G01 | GAGE, INSPECT-COMPRESSOR ROTOR | 1 | |
| 2C6545 | GAGE INSPECT-COMPRESSOR FRONT | 1 | |
| 2C6545G01 | GAGE INSPECT-COMPRESSOR FRONT | 1 | |
| 2C6547 | GAGE,INSPECT-COMPRESSOR REAR S | 1 | |
| 2C6547G01 | GAGE,INSPECT-COMPRESSOR REAR S | 1 | |
| 2C6646 | GAGE,VSV LEVER ARM INSPECTION | 1 | |
| 2C6646G01 | GAGE,VSV LEVER ARM INSPECTION | 1 | |
| 2C6963 | GAGE, INSPECT-VSV LEVER | 1 | |
| 2C7104 | GAGE SET,INSPECT-NO.4 BEARING | 1 | |
| 2C7104G01 | GAGE SET,INSPECT-NO.4 BEARING | 1 | |
| 2C7112 | GAGE SET,INSPECT-CDP STATIONAR | 1 | |
| 2C7112G01 | GAGE SET,INSPECT-CDP STATIONAR | 1 | |
| 2C8055G01 | INSPECTION GAGE | 3 | |
| 2C8063 | GO/NO GO GAGE, INSPECT-SPLINED ADAPTOR | 1 | |
| 2C8063 REV C | GO/NO GO GAGE, INSPECT-SPLINED ADAPTOR | 1 | |
| 2C8064G01 | SPLINE ADAPTER INSPECTION GONO-GO GAGE | 2 | |
| 2C8064G02 | GAGE, INSPECT - MUFF | 1 | |
| 2C91069 | GAGE,INSPECT LEAD.EDGE-FAN BLD | 1 | |
| 2C91069G01 | GAGE - FAN BLADE L.E. INSPECTION | 1 | |
| 2C91387G01 | COMBUSTOR FERRULE INSPECTION GAGE | 1 | |
| 2C91395G01 | GAGE, COMPRESSOR BLADE DOVETAIL INSPECTION | 1 | |
| 2J12625 | GAGE, INSPECTION | 1 | |
| 2M14166 | GAGE, INSPECTION - LPT, BLADE STAGE 3 | 1 | |
| 2M14170 | GAGE, INSPECTION | 1 | |
| 2ME140W9255 | GAGE, INSPECTION - LPT, BLADE STAGE 3 | 2 | |
| 2P16260 | INSPECTION GAGE | 1 | |
| 38W00209975184 | INSPECTION GAGE | 1 | |
| 38W00209975186 | INSPECTION GAGE | 1 | |
| 3C3420G03 | GAGE, INSPECTION-FAN ROTOR TO LPT, SHAFT EATING | 1 | |
| 6723094 | FINEL INSPECTION GAGE | 1 | |
| 6723100 | INSPECTION GAGE | 1 | |
| 831000-1 | GAGE ASSEMBLY SET, "P" POINT INSPECTION | 1 | |
| 856A1050G02 | FIXT INSPECT SHIM 3-6" DEPTH GAGE | 1 | |
| 856A1809G01 | CFM56-7 BLADE CHORD INSPECTION GAGE | 5 | |
| 856A1837G01 | GAGE INSPECTION, FAN DISK | 1 | |
| 856A3629P01 | GAGE INSPECTION | 1 | |
| 856A3629P02 | GAGE INSPECTION UNACCEPTABLE SEALING AREA | 11 | |
| 856A4633G02 | GAGE INSPECTION, FAN DISK | 13 | |
| 856A4637G01 | INSPECTION TOOL - BOOSTER SPOOL FLANGE GAGE | 9 | |
| 856A5562G02 | BUCKLING INSPECTION GAGE - LPT | 3 | |
| 859R1003 | GAGE, INSPECTION - SHROUD HANGER HP TURBINE STATOR (INSPECTION GAGE) | 1 | |
| 859R1003G01 | (RT) GAGE - INSPECTION | 1 | |
| A25020 | GAGE INSPECTION SEAT TRACK FLIGHT CREW | 1 | |
| A25020-1 | GAGE - INSPECTION, SEAT TRACK, FLIGHT CREW | 2 | |
| A25020-4 | GAGE - INSPECTION, SEAT TRACK, FLIGHT CREW | 5 | |
| A25020-4 | INSPECTION GAGE SEAT TRACK | 5 | |
| A25020-8 | GAGE - INSPECTION, SEAT TRACK, FLIGHT CREW | 25 | |
| A25020-8-M | SEAT TRACK INSPECTION GAGE | 1 | |
| CE4-1267 | GAGE INSPECT BLADE | 1 | |
| CRES-17-4 PH | GAGE,INSPECTION | 2 | |
| D12-09892-12 | INSPECTION GAGE | 1 | |
| D12-9892-04 | INSPECTION GAGE | 4 | |
| D12-9892-06 | INSPECTION GAGE 06 | 5 | |
| D12-9892-08 | INSPECTION GAGE | 5 | |
| D12-9892-10 | INSPECTION GAGE 10 | 4 | |
| D12-9892-12 | INSPECTION GAGE 12 | 2 | |
| D12-9892-16 | INSPECTION GAGE 16 | 1 | |
| D12-9892-20 | INSPECTION GAGE 20 | 1 | |
| D12-9892-24 | INSPECTION GAGE 24 | 1 | |
| DAT06AECG1016 | CIRCULAR INSPECTION GAGE | 1 | |
| DAT06AEIG1016 | FLAT INSPECTION GAGE | 4 | |
| DAT08AECG5004 | INSPECTION GAGES -04 | 1 | |
| DAT08AECG5006 | INSPECTION GAGE | 1 | |
| DBS-CG7 | VERIFICATION INSPECTION GAGE FOR DBS-2100 | 3 | |
| DBS-CG8 | VERIFICATION INSPECTION GAGE FOR DBS-2200 | 3 | |
| G125 | Inspection Gage | 10 | |
| G125 (M22520/3-1) | IN - SERVICE INSPECTION GAGE | 1 | |
| G27041 | INSPECTION GAUGE - CONNECTOR ENGAGEMENT | 1 | |
| G411 | IN SERVICE INSPECTION A GAGE | 6 | |
| G687 | INSPECTION GAGE FOR CONDUCTOR | 2 | |
| G720 | INSPECTION GAGE | 2 | |
| G721 | INSPECTION GAGE | 2 | |
| G722 | INSPECTION GAGE | 2 | |
| G723 | INSPECTION GAGE | 2 | |
| G724 | INSPECTION GAGE | 2 | |
| G725 | INSPECTION GAGE | 2 | |
| G743 | INSPECTION GAGE FOR CONDUCTOR | 3 | |
| GS23881-1 | KNIFE EDGE INSPECTION FIXTURE, ROUGHNESS GAGE | 1 | |
| IAE2J12624 | GAGE INSPECTION | 1 | |
| IAE2M14176 | GAGE, INSPECTION | 1 | |
| IAE2M14177 | INSPECTION GAGE | 1 | |
| IAE2M14178 | GAGE, INSPECTION | 1 | |
| IAE2M14179 | GAGE, INSPECTION | 1 | |
| IAE2M14180 | GAGE, INSPECTION | 1 | |
| IAE2M14186 | GAGE, INSPECTION | 4 | |
| IAE2M14187 | GAGE, INSPECTION | 4 | |
| J24016-1 | BATTERY INSPECTION GAGE TOOL | 7 | |
| J24016-2 | Battery inspection gage assy | 1 | |
| K-10 | COAX INSPECTION GAGE KIT | 2 | |
| LT-27 | INSPECTION GAGE | 1 | |
| LTCT3653 | CONTOUR GAGE INSPECT FOR EROSION ON ID(IMPELLER HOUSING) | 1 | |
| M22520/3-1 | Inspection Gage | 10 | |
| M22520/39-01 | GAGE - INSPECTION - DMC | 1 | |
| MG2-25 | INSPECTION GAGE SET | 1 | |
| MGP-05 | INSPECTION GAGE | 1 | |
| MS23003-4 | INSPECTION GAGE | 1 | |
| MS23003-6 | INSPECTION GAGE | 1 | |
| MS23003-8 | INSPECTION GAGE | 1 | |
| MS90486-01 | INSPECTION GAGE | 1 | |
| MS90486-02 | INSPECTION GAGE | 1 | |
| MS90486-03 | INSPECTION GAGE | 1 | |
| MS90486-04 | INSPECTION GAGE | 1 | |
| MS90486-1 | INSPECTION GAGE | 1 | |
| MS90486-2 | INSPECTION GAGE | 1 | |
| MS90486-4 | INSPECTION GAGE | 1 | |
| MS90486-6 | INSPECTION GAGE | 1 | |
| MS90486-8 | INSPECTION GAGE | 1 | |
| PWA 107152 | GAGE, TILT INSPECTION | 1 | |
| PWA101223 | GAGE INSPECTION | 1 | |
| PWA107152 | INSPECTION GAGE | 1 | |
| PWA107868 | GAGE INSPECTION | 1 | |
| PWA115296 | Gage, Inspection | 1 | |
| PWA28678 | INSPECTION GAGE - MASTER BLADE_[PWA28678] | 2 | |
| PWA29646 | GAGE-INSPECTION AIRFOIL RADII | 2 | |
| PWA45877 | GAGE INSPECTION FAN BLADE RUBSTRIP FOR DAMAGE | 1 | |
| PWA46050 | GAGE INSPECTION FAN BLADE RUBSTRIP FOR DAMAGE | 1 | |
| PWA46088 | GAGE - AIRFOIL RADII INSPECTION | 1 | |
| PWA46088 REV A | GAGE - AIRFOIL RADII INSPECTION | 1 | |
| PWA46319 | GAGE, INPROCESS INSPECT - FAN BLADE L.E. REWORK | 2 | |
| PWA46319 REV NC | GAGE, INPROCESS INSPECT - FAN BLADE L.E. REWORK | 1 | |
| PWA463I9 | GAGE, INPROCESS INSPECT - FAN BLADE L.E. REWORK | 1 | |
| PWA80705 | GAGE,INSPECTION | 1 | |
| PWA80706 | GAGE,INSPECTION | 1 | |
| PWA80707 | GAGE,INSPECTION | 1 | |
| PWA80708 | GAGE INSPECTION | 1 | |
| PWA80709 | GAGE,INSPECTION | 1 | |
| PWA85579 | GAGE INSPECTION CASE | 4 | |
| PWA85595 | GAGE INSPECTION | 1 | |
| PWA87275 | GAGE INSPECTION VANE ANGLE | 1 | |
| PWA87514 | GAGE - INSPECTION PLUG | 3 | |
| PWC32268-001 | Diffuser Entry Inspection Gage | 4 | |
| PWC32268-002 | Diffuser Entry Inspection Gage | 3 | |
| PWC32268-003 | Diffuser Entry Inspection Gage | 2 | |
| RM-18K-L-LG-TS | GAGE-INSPECTION | 2 | |
| RTSG0-51-04 | INSPECTION GAGE 1/4 | 1 | |
| RTSGO-51-05 | INSPECTION GAGE | 1 | |
| RTSGO-51-08 | INSPECTION GAGE | 1 | |
| SK215T-10012 | GAGE,INSPECTION | 1 | |
| SK215T10005 | GAGE,INSPECTION | 1 | |
| SK415-10001 | GAGE.INSPECTION | 1 | |
| SSTYPE301 | GAGE,INSPECTION,MAST | 2 | |
| ST4130 | GAGE,INSPECTION | 1 | |
| ST62899 | Gage, Inspection | 1 | |
| TI-6AL-6V-2SN | GAGE,INSPECTION | 3 | |
| TM6935G001 | EROSION GAGE INSPECTION TEMPLATE ASSY FOR AXIAL COMPRESSOR BLADES | 2 | |
| WAHHG75-5 | GAGE INSPECTION | 1 | |
| WAHHG75-6 | GAGE INSPECTION | 1 | |
| WAHHG85-7 | GAGE INSPECTION | 1 | |
| WAVEB2G20008 | EDDIE BOLT 2 INSPECTION GAGE F | 1 | |
| WCI8703CF | INSPECTION TOOLGAGE COUNTERSINK DEPTH (FOR GF) | 1 | |
| А25020-8 | GAGE - INSPECTION, SEAT TRACK, FLIGHT CREW | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
