| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| M22520/23-02 | GAGE 8 | 6 | |
| WA23-131L | GAGE 8 | 1 | |
| WA23-140DA | GAGE 8 | 3 | |
| WA23-2 | GAGE 8 | 6 | |
| WA23-9 | GAGE 8 | 4 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 101-00540 | TESTER - FUEL GAGE SYSTEM (8000) | 2 | |
| 106 | GAGE,DEPTH,MICROMETER;2.500";PROVIDED;0.0010";MULTIPLE ROD; 0.000 TO 6.000";NOT INCLUDED;6;1/8 IN. DIA;| | 1 | |
| 1082-00-20 | GAGE, HYDRAULIC PRESSURE: 0 TO 20 PSIG (138 KPAG) ,0 TO 100 PSIG (690 KPAG),0 TO 250 PSIG (1724 KPAG),0 TO 300 PSIG (2069 KPAG),0 TO 600 PSIG (4137 KPAG) AND 0 TO 5000 PSIG (34475 KPAG) | 1 | |
| 1408 | TRACTOR - BAGGAGE & CARGO - 8,000 LB DRAW BAR PULL | 1 | |
| 11851 | GAGE G189 FOR Y216 | 1 | |
| 1440-2 | GAGES PART NUMBER: 1440-2, SUPPLIER CODE: K1012/01558 | 3 | |
| 15F2800 | CART - BAGGAGE - 60 INCH X 120 INCH OPEN STYLE WITH REMOVABLE END PANELS - 8,000 LB CAPACITY | 1 | |
| 17A1572G01 | GAGE, OVERSIZED SETSCREW STG 8-14 | 1 | |
| 192-112 | HEIGHT GAGE .001-18 | 1 | |
| 2141-201A | DIGITAL DEPTH GAGE - RANGE: 0-12"/300MM ACCURACY: /- 0.0008/.02MM | 1 | |
| 21C6131G01 | GAGE 54-84 | 1 | |
| 23878 | PRESSURE GAGE 0-85 PSI | 1 | |
| 060177 | Sensor Gaged MTX 80z | 1 | |
| 063602 | Sensor Gaged for BMX80z | 1 | |
| 231843 | PPG Semco 231843 14 Gage 12 Dark Green Sem-Luer Needles | 1 | |
| 231844 | PPG Semco 231844 14 Gage 1 Dark Green Sem-Luer Needles | 2 | |
| 231845 | PPG Semco 231845 15 Gage 12 Orange Sem-Luer Needle | 1 | |
| 231846 | PPG Semco 231846 15 Gage 1 Orange Sem-Luer Needle | 1 | |
| 231849 | PPG Semco 231849 18 Gage 12 Pink Sem-Luer Needle | 1 | |
| 231850 | PPG Semco 231850 18 Gage 1 Pink Sem-Luer Needle | 1 | |
| 231851 | PPG Semco 231851 19 Gage 12 Brown Sem-Luer Needle | 1 | |
| 231852 | PPG Semco 231852 19 Gage 1 Brown Sem-Luer Needle | 1 | |
| 231853 | PPG Semco 231853 20 Gage 12 Yellow Sem-Luer Needle | 1 | |
| 231854 | PPG Semco 231854 20 Gage 1 Yellow Sem-Luer Needle | 1 | |
| 231855 | PPG Semco 231855 21 Gage 12 Green Sem-Luer Needle | 1 | |
| 231856 | PPG Semco 231856 21 Gage 1 Green Sem-Luer Needle | 1 | |
| 231857 | PPG Semco 231857 22 Gage 12 Black Sem-Luer Needle | 1 | |
| 231859 | PPG Semco 231859 23 Gage 12 Light Blue Sem-Luer Needle | 1 | |
| 231860 | PPG Semco 231860 23 Gage 1 Light Blue Sem-Luer Needle | 1 | |
| 231863 | PPG Semco 231863 25 Gage 12 Blue Sem-Luer Needle | 1 | |
| 231864 | PPG Semco 231864 25 Gage 1 Blue Sem-Luer Needle | 1 | |
| 231866 | PPG Semco 231866 26 Gage 12 Peach Sem-Luer Needle | 1 | |
| 231867 | PPG Semco 231867 27 Gage 516 Tan Sem-Luer Needle | 1 | |
| 231869 | PPG Semco 231869 30 Gage 516 Lavender Sem-Luer Needle | 1 | |
| 232728 | PPG Semco 232728 14 Gage 1 Dark Green Sem-Flex Needle | 1 | |
| 232734 | PPG Semco 232734 18 Gage 2 Pink Sem-Flex Needle | 1 | |
| 232748 | PPG Semco 232748 28 Gage 1 Tan Sem-Flex Needle | 1 | |
| 232893 | PPG Semco 232893 26 Gage 18 Peach Sem-Flex Needle | 1 | |
| 282645 | GAGE - ACCELERATION LIMITER, FUEL CONTROL CRACK PRESSURE - GTCP85-129 ONLY | 7 | |
| 1177697 | HAND BRAKE CABLE (FOR TLD BAGGAGE TRACTOR, MODEL: JST-30 S/L: T58941, T58942, T58943) | 1 | |
| 2566824 | DEPTH GAGE (CAGE: 06848) | 1 | |
| 23068612 | Gage – Seal, HP & LP 3.428R | 1 | |
| 2685742-G-4 | BOBBER GAGE (CAGE: 06848) | 1 | |
| 2843-006 | GAGE, MANDREL CHECK(1.0285) | 1 | |
| 2900-51R | RIVET HEIGHT GAGE - 2900-5-1R W/683-3 BODY | 1 | |
| 294884-1 | DUMMY SHAFT (LOCATES OVER TURBINE END OF 3822077-1 TIE SHAFT AND ENGAGE ON SHAFT) | 1 | |
| 297292-1 | (NSN: 5220-01-687-5924), GAGE, RING, MASTER SETTING | 1 | |
| 2C6613G01 | GAGE DEPTH TOOL-ENG CF6-80E1 | 10 | |
| 2C6962G05 | GAGE SIGHT (CF6-6,-50,-80A,-80C2,-80E1 | 8 | |
| 2C6963G04 | Gage Set, IGV, Stg.1-4 (80A3 / C2) | 2 | |
| 2C6966G05TK | VSV Lever Arm Gage (80A3/C2) | 1 | |
| 2C6966G07 | GAGE, SIGHT BHGE 2C6966G07 FOR VSV ACTUATION ARMS USED IN WP 4028 00 SPECIAL TOOL FOR HIGH PRESSURE COMPRESSOR IGV AND VSV VISUAL INDPECTION | 3 | |
| 2C7549G03 | Comp. Blade Length Gage (CF6-80A3) | 1 | |
| 2C8016G01 | VSV Sight Gage (80C2) HPT Pressure Tube | 2 | |
| 2C8016G03 | GAGE, SIGHT BHGE 2C8016G03 FOR VSV STAGE 5 ACTUATION ARMS USED IN WP 4028 00 SPECIAL TOOL FOR HIGH PRESSURE COMPRESSOR IGV AND VSV VISUAL INDPECTION | 2 | |
| 30386-0035 | FORCE GAGE_[30386-0035] | 1 | |
| 343-20-12SP | GAGE DRIVE 400 IN LB 3/8DR | 1 | |
| 35-1009-SW-02L-200PSI | PRESSURE GAGE (2 REQUIRED (0 TO 300 PSIG (0 TO 2068 KPA), ±1% OF FULL SCALE) (ASHCROFT) | 1 | |
| 3648-260 | HARDENED BASE EXTENSION 260 MM USED FOR 3753 SERIES ELECTRONIC DEPTH GAGES STARRETT PART NO: 3648-260 | 1 | |
| 38DL | OLYMPUS THICKNESS GAGES 38DL PLUS | 1 | |
| 38DLP90SMUMTEES | DIGITAL ULTRASONIC THICKNESS GAGE 38DL P | 1 | |
| 3C-681-25 | GAGE BILT 3C-681-25 Straight Non Self-Releasing 332 Blind Rivet Pulling Head | 1 | |
| 4088K42 | PRESSURE GAGE 138 BAR ( 2000PSI) | 1 | |
| 442124-G-1 | GO-GAGE (CAGE: 06848) | 1 | |
| 451082PS02L200#XPDXC4 | TEST GAGE MODEL 1082 0-200PSI | 1 | |
| 492037Z146105 | RE-ENGAGEMENT TOOL - BUSHING (856A3924G01) | 1 | |
| 4GP | PLUG, MS GAGE PORT, WITHO-RING(D18302 VALVE/REGULATORS) | 1 | |
| 5/8-18-TRG-3A-SET | 5/8-18 UNJF 3A GO/NO GO RING GAGE SET. PD: .5889" / .5854" | 1 | |
| 516-704-10 | PLANE GAGE BLOCKS -GRADE 2; -8 BLOCKS PER SET | 1 | |
| 60-1125-SW-02L-200PSI | DIFFERENTIAL PRESSURE GAGE (0 TO 300 PSIG (0 TO 2068 KPA), ±1% OF FULL SCALE) (ASHCROFT) | 1 | |
| 620784-G | GAGE-FOR 620784 DIE | 1 | |
| 621055 | GAGE (M22520/3-8) | 1 | |
| 643JZ | DIAL DEPTH GAGE, 1/8 | 11 | |
| 64AAB477R | Mitutoyo 64AAB477R MeasurLink 8 Gage R&R | 1 | |
| 64AAB478R | Mitutoyo 64AAB478R MeasurLink 8 Gage Management | 1 | |
| 65425-101 | MASTER GAGE/ADAPTER ASSEMBLY (OR EQUIVALENT GAGE PER 49 CFR 180.205) | 1 | |
| 660022 | GAGE-FOR M/1-01 USE SEL. #8 | 1 | |
| 660037 | GAGE-FOR A810-1 CRIMP TOOL | 1 | |
| 67808-101 | ENVELOPE GAGE, AFT DOOR D30665-( ) 67808-101 | 2 | |
| 67809-101 | ENVELOPE GAGE, FORWARD DOOR D30664-( ) 67809-101 | 2 | |
| 6872423 | GAGE - GO PLUG NO. 8 | 1 | |
| 6T112X6 | LIFT-ALL 6" X 6 FT TYPE 1 ROUGHNECK WIRE MESH SLING - 12 GAGE - 4800 LBS WLL | 3 | |
| 829A | GAGE 829A - STARETT HOLE | 3 | |
| 829B | GAGE 829B - STARETT HOLE | 2 | |
| 831412-1 | SPLINE WEAR INDICATION KIT (CONSISTS OF 831412-11/-13/-15/ -17/-19/-21 GAGES) | 1 | |
| 856A2676G01 | CHECK FEELER GAGE - LPT (FEELER GAGE)OBSELETE REPLACED BY 856A2676G02 | 1 | |
| 8600393 | PROTRUSION GAGE-ROLLS-ROYCE 8600393 | 1 | |
| 88-100 | Gage Set for AF8, M22520/1-01 | 4 | |
| 88-200 | Gage Set for AFM8, M22520/2-01 | 2 | |
| 88-300BT | Gage Set for M300BT-Go/No-Go Sel 1-8 | 2 | |
| 88-307 | GAGE SET FOR M307 - 8 GAGES INSMALL BOX WITH FOAM AND CHART | 1 | |
| 88-309 | Gage Set for M309-Go/No-Go Sel 1-8 | 2 | |
| 88-700 | Gage Set for MH860, M22520/7-01 | 2 | |
| 88-800 | Gage Set for MH800 | 2 | |
| 90-RG7000 | Bowers 90-RG7000 Gagemaker External Thread Roll Gauge Range 5/8-4" | 1 | |
| 90-RG7001 | Bowers 90-RG7001 Gagemaker External Thread Roll Gauge Range 4-8" | 1 | |
| 90-RG7002 | Bowers 90-RG7002 Gagemaker External Thread Roll Gauge Range 8-12" | 1 | |
| 90-SPG6000 | Bowers 90-SPG6000 Gagemaker Internal Thread Roll Gauge 1" Reach Range 5/8 - 1 1/2" | 1 | |
| 90-TP-3-1.25-84 | Bowers Profile Gage 2 3/8" - 3 1/2" Hughes | 1 | |
| 90-TP-3.5-2-50 | Bowers Profile Gage 3 1/2" - 6 5/8" Hughes H-90 | 1 | |
| 90-TP-3.5-3-50 | Bowers Profile Gage 7" - 8 5/8" Hughes H-90 | 1 | |
| 90-TP-4-1.5-76 | Bowers Profile Gage 2 3/8" - 3 1/2" P.A.C. | 1 | |
| 90-TP-4-2-50 | Bowers Profile Gage 6 5/8" API REG | 1 | |
| 90-TP-4-3-50 | Bowers Profile Gage 5 1/2", 7 5/8" & 8 5/8" | 1 | |
| 90-TP-5-3-40 | Bowers Profile Gage 2 3/8" - 4 1/2" API REG | 1 | |
| 90-TP-6-2-32 | Bowers Profile Gage 2 3/8" - 2 7/8" Hughes | 1 | |
| 90-TRA-18P | Bowers 90-TRA-18P Gagemaker Thread Roll ACME 18 Pitch (Set of 2) | 1 | |
| 90-TRA-8P | Bowers 90-TRA-8P Gagemaker Thread Roll ACME 8 Pitch (Set of 2) | 1 | |
| 90-TRB7458P | Bowers 90-TRB7458P Gagemaker Thread Rolls 8mm Pitch | 1 | |
| 90-TRSA-18P | Bowers 90-TRSA-18P Gagemaker Thread Roll Stub ACME 18 Pitch | 1 | |
| 90-TRSA-8P | Bowers 90-TRSA-8P Gagemaker Thread Roll Stub ACME 8 Pitch | 1 | |
| 90-TRVE-8P | Bowers 90-TRVE-8P Gagemaker Thread Roll External 8 Pitch | 1 | |
| 9429M94P01 | (LINIGAGE SYSTEM, 120V); W/WINDOWS-BASED LGWAS & (1) 20' 5506-1800 PROBE | 1 | |
| 98A52107632000 | GAGE-THICKNESS, PAINT BORER 518 | 26 | |
| A-305183 | REMOVAL TOOL 18 AND 20 GAGE AMP RECTANGULAR PLUGS. | 1 | |
| A005414D | CART - BAGGAGE - 60 INCH X 120 INCH OPEN STYLE WITH REMOVABLE END PANELS - 8,000 LB CAPACITY | 1 | |
| A1290-SP8G | GAGE (AP1290-SP8) OBSOLETE | 1 | |
| A768-210-30 | DIAL INDICATING PRESSURER GAGE (NSN 6685013269186) | 1 | |
| AEM210423008 | STEP GAGE .004-.008/1/2X3/1/2L | 1 | |
| AGE-01098-001 | WRENCH-ADJ, BAGGAGE DOOR ECCENTRIC P/N AGE-01098-001 | 4 | |
| AGM06008 | GAGE (EQUIVALENT TO M22520/6-008) | 1 | |
| AGM06028 | GAGE (EQUIVALENT TO M22520/6-028) | 1 | |
| AK2061-GB | GAGE, .068 HEX CAVITY | 1 | |
| AMT23002DA | DIE (M22520/23-02) 8 GAGE | 1 | |
| AMT23009L | LOCATOR (M22520/23-09) 8 GAGE | 1 | |
| AMT23104L | LOCATOR, 8 GAGE | 1 | |
| AMT23117L | LOCATOR, 8 GAGE | 1 | |
| AMT23131L | LOCATOR, 8 GAGE | 1 | |
| AMT23140DA | DIE ASSEMBLY, 8 GAGE | 1 | |
| AMT23147L | LOCATOR, 8 GAGE | 1 | |
| AMT23161L | LOCATOR, 8 GAGE | 1 | |
| AMT23165L | LOCATOR, 8 GAGE | 1 | |
| AMT23189L | LOCATOR, 8 GAGE | 1 | |
| AMT23223L-BX | LOCATOR, 8 GAGE (=10-589525-8) | 1 | |
| AMT23245L | LOCATOR, 4 THROUGH 8 GAGE | 1 | |
| AMT23249DA | DIE ASSEMBLY, 8 GAGE | 1 | |
| AMT23280L | LOCATOR, 8 GAGE | 1 | |
| AMT23291L | LOCATOR, 8 GAGE | 1 | |
| AMT23366L | LOCATOR, 8 GAGE | 1 | |
| AMT23447L | LOCATOR, #8 & 10 GAGE | 1 | |
| AMTG1801 | GAGE-M22520/18-01 | 1 | |
| AMTG23118 | GAGE-FOR AMT23118DA | 1 | |
| AMTG23138 | GAGE-FOR AMT23138DA | 1 | |
| AMTG23168 | GAGE-FOR AMT23168DA | 1 | |
| AMTG23184 | GAGE-FOR AMT23184DA | 1 | |
| AMTG23198 | GAGE-FOR AMT23198DA | 1 | |
| ATBO 2279 | TWEEZER, REMOVAL (8 GAGE) | 1 | |
| ATBO 2279-100 | TWEEZER, REMOVAL (8 GAGE) | 1 | |
| ATBX 1-8220 | PLIER, INSERTION, 8 GAGE | 1 | |
| ATBX 2277 | TWEEZER, REMOVAL 8 GAGE | 1 | |
| ATC 2281 | PLIER, REMOVAL, 8 GAGE | 1 | |
| B27039-28 | RIGGING EQPT - GAGE (B27039-3 ASSY INCLUDED IN B27039-28 EQPT) | 9 | |
| BLOCK GAGE | 81PC SHOP GR ECONOMY RECT SPI GAGE BLOCK SET | 1 | |
| C32051-1 | SET, GAGE - HYDRAULIC BRAKE SYSTEM, PRESSURE CHECKING_WEIGHT : 75 LBS, DIMENSION : 16 X 27 X 28” | 8 | |
| CBMG-12-2-N | GAGE, MANDREL CHECK (0.3857) | 2 | |
| CBMG-4-4-N | GAGE, MANDREL CHECK(0,1648) | 3 | |
| CBMG-6-1-N | GAGE, MANDREL CHECK (0.1889) | 4 | |
| CBMG-8-3-N | GAGE, MANDREL CHECK (0.2783) | 6 | |
| CBMG4-4N | GAGE, MANDREL CHECK (0.1648) | 3 | |
| CBMG6-1N | GAGE, MANDREL CHECK (0.18) | 4 | |
| CBR-4-2-N-RA-.1590 | RIGHT ANGLE GAGE FINISH REAMER (0.1580" - 0.1600") | 1 | |
| CBR-4-4-N-1 | GAGE REAMER .1870/.1850 | 1 | |
| CBR-4-4-N-1-1875 | GAGE FINISH REAMER (ORIGINAL PN:CBR-4-4-N-1-.1875) | 1 | |
| CBR-4-4-N-RA-.1770 | RIGHT ANGLE GAGE FINISH REAMER (0.1760" - 0.1780") | 1 | |
| CBR-6-0-N-1 | GAGE REAMER .1870/.1850 | 1 | |
| CBR-6-0-N-RA-.1850 | RIGHT ANGLE GAGE FINISH REAMER (0.184" - 0.186") | 2 | |
| CBR-8-0-N-1 | GAGE REAMER .2480/.2450 | 1 | |
| CBR-8-0-N-RA-.2465 | RIGHT ANGLE GAGE FINISH REAMER. (0.246" - 0.248") | 1 | |
| CGF-10X-3B | KATO GAGE WORKING 3B SIZE 5/8-18 | 1 | |
| CGF-4X-3B | KATO TANGLESS GAGE WORKING 3B SIZE 1/4-28 REF. CGF-4X-3B | 1 | |
| CGF-6X-3B | KATO TANGLESS GAGE WORKING 3B SIZE 3/8 -24 REF. CGF-6X-3B | 1 | |
| CODENO.514-105 | HS-18 (HS45) HEIGHTGAGE "Mitutoyo" | 1 | |
| D-4000 | FEDERAL DIMENSION AIR GAGE ( WITH SETTING RING ADN AIR PLUG) OR EQUIVALENT 1.1268 SETTING RING 1.1268 AIR PLUG | 1 | |
| D12-9892-04 | GAGE #6 3/8" INSPECTION | 5 | |
| D12-9892-08 | INSPECTION GAGE 08 | 6 | |
| DBS-2102 | Hand Operated .250 Wide One-Step Band Application Tool M81306/1A with Gage and Tension Key | 2 | |
| DBS-2202 | Hand Operated .125 Wide One-Step Mini-Band Application Tool M81306/1B with Gage and Tension Key | 2 | |
| DBS-CG2A | M81306/2-01E Verification Set which includes DBS-CG2 and G691 Gage | 2 | |
| DBS-CG3A | M81306/2-02F Verification Set which includes DBS-CG3 and G752 Gage | 2 | |
| DEM-18 | VERNIER DEPTH GAGE_17INCHES_[DEM-18] | 1 | |
| DEM18 | DEPTH GAGE_(0 ~ 20) INCH, 0.001 INCH_[DEM18] | 1 | |
| DMC199 | DMC199 - MH860 with Postioner & Gage Tool Kit | 2 | |
| DR9415 | Starrett S3089MZ-181-160J BORE GAGE | 1 | |
| F28276000 | ADJUSTMENT TOOL WITH SETTING SHIMS (GS48354 GS48363) AND GAGE T47948 | 1 | |
| F70284-1 | SPL-1625 Wear Gage Set - Ground Power Plug and Receptacle 737-600, -700, -800 | 28 | |
| F80198-14 | PLUG GAGE - NOSE LANDING GEAR NUT (F80198-18 IS INCLUDED IN THE KITF80198-14) | 12 | |
| FB316B | 18SPK/IGN FLR GAGE(.010-.035") | 3 | |
| FB326B | 26 FLR/IGN GAGE (.008-.035") | 1 | |
| FBL4 | FEELER GAGE_0.005(4), 0.008(4), 0.010(4), 0.015(4)_[FBL4] | 1 | |
| FMG-647-30010-B | GAGE, MANDREL CHECK (1.6859) | 1 | |
| FTE-01-35-14000 | AILERON SETTING GAGE STA.3860 | 1 | |
| FTE-01-35-32000 | ELEVATOR SETTING GAGE STA.1890 | 1 | |
| FZDG-4 | BRILES GAGE 1/8 | 1 | |
| G1006 | Gage - GO .0760 - NO-GO .0810 for M309 | 2 | |
| G1007 | Gage - GO .0860 - NO-GO .0950 for M309 | 2 | |
| G1014 | Gage - GO .0820 - NO-GO .0880 | 2 | |
| G1150 | GAGE GO.1110 - NO-GO.1190- Use w/ HD51-114N & -118N | 2 | |
| G1153 | GAGE- GO.1860 - NO-GO.1940- Use w/ HD51-117N & -121N | 2 | |
| G1154 | Gage GO .0760 - NO-GO .0810 | 2 | |
| G1155 | Gage GO .0860 - NO-GO .0950 | 2 | |
| G1261 | Gage - GO/NO-GO for Y832 Cavity "B" | 2 | |
| G1262 | Gage for TE 576783 Wire Barrel | 2 | |
| G1263 | Gage - GO NO-GO for TE 576783 Insulation | 2 | |
| G150 | Gage - GO .1015 - NO-GO .1085 - M22520/6-001 | 2 | |
| G170 | Gage - GO .2515 - NO-GO.2585 - M22520/6-011 | 2 | |
| G1720-5 | Gage - GO .0510 - NO-GO .0580 | 2 | |
| G175 | Gage - GO .3395 - NO-GO .3465 - M22520/6-018 | 2 | |
| G180 | Gage - GO .2095 - NO-GO .2165 - M22520/6-008 | 2 | |
| G185 | Gage - GO .1745 - NO-GO .1815 - M22520/6-006 | 2 | |
| G194 | Gage - GO .2865 - NO-GO .2935 - M22520/6-014 | 2 | |
| G199 | Gage - GO .3805 - NO-GO .3875 - M22520/6-020 | 2 | |
| G203 | Gage - GO .4715 - NO-GO .4785 - M22520/6-025 | 2 | |
| G205 | Gage - GO .5285 - NO-GO .5355 - M22520/6-027 | 2 | |
| G206 | Gage - GO .1345 - NO-GO .1415 - M22520/6-028 | 2 | |
| G207 | Gage - GO .0875 - NO-GO .0945 - M22520/6-030 | 2 | |
| G208 | GAGE G208 FOR Y635 Y680 | 2 | |
| G212 | Gage - GO .0350 - NO-GO .0380 | 2 | |
| G213 | Gage - GO .0130 - NO-GO .0180 | 2 | |
| G220 | Gage - GO .0280 - NO-GO .0330 | 2 | |
| G227 | Gage - GO .0680 - NO-GO .0730 | 2 | |
| G233 | Gage - GO .0330 - NO-GO .0380 | 2 | |
| G247 | Gage - GO .1080 - NO-GO .1180 | 2 | |
| G257 | Gage - GO .0890 - NO-GO .0920 - M22520/3-5 | 2 | |
| G259 | Gage - GO .1480 - NO-GO .1510 - M22520/3-7 | 2 | |
| G260 | Gage - GO .1210 - NO-GO .1240 - M22520/3-8 | 2 | |
| G269 | Gage - GO .2775 - NO-GO .2825 | 2 | |
| G270 | Gage - GO .0285 - NO-GO .0335 | 2 | |
| G278 | Gage - GO .1220 - NO-GO .1280 | 2 | |
| G280 | Gage - GO .0455 - NO-GO .0485 | 2 | |
| G281 | Gage - GO .3098 - NO-GO .3140 - MS23003-2 | 2 | |
| G282 | Gage - GO .4358 - NO-GO .4400 - MS23003-03 | 2 | |
| G288 | Gage - GO .1755 - NO-GO .1805 | 2 | |
| G289 | Gage - GO .3815 - NO-GO .3865 | 2 | |
| G296 | Gage - GO .1080 - NO-GO .1180 | 2 | |
| G314 | Gage - GO .0730 - NO-GO .0830 | 2 | |
| G316 | Gage - GO .0180 - NO-GO .0220 | 2 | |
| G32005-8 | GAGE - FITTING, INBD TRUNNION VERTICAL SUPPORT SPL-5168 | 6 | |
| G329 | Gage - GO .0830 - NO-GO .0890 for AMP 46447 | 3 | |
| G330 | Gage - GO .0860 - NO-GO .1000 | 2 | |
| G336 | Gage - GO .1850 - NO-GO .1930 | 2 | |
| G346 | Gage - GO .1715 - NO-GO .1805 | 2 | |
| G352 | Gage - GO .0860 - NO-GO .0940 | 2 | |
| G359 | Gage - GO .1485 - NO-GO .1535 | 2 | |
| G390 | Gage - GO .1985 - NO-GO .2055 | 2 | |
| G391 | Gage - GO .0700 - NO-GO .0800 | 2 | |
| G392 | Gage - GO .0750 - NO-GO .0850 | 2 | |
| G393 | Gage - GO .0800 - NO-GO .0900 | 2 | |
| G394 | Gage - GO .0850 - NO-GO .0950 | 2 | |
| G397 | Gage - GO .1180 - NO-GO .1280 | 2 | |
| G409 | Gage - GO .3760 - NO-GO.3840 | 2 | |
| G40D-06-P10 | GAGE (DIAMETER IS 40MM 0-150 PSI 0 -1 MPA CONNECTOR G1/8) | 1 | |
| G415 | Gage - GO .0730 - NO-GO .0780 | 2 | |
| G424 | Gage - GO .0760 - NO-GO .0810 | 2 | |
| G430 | Gage - GO .1040 - NO-GO .1080 | 2 | |
| G432 | Gage - GO .2720 - NO-GO .2840 | 2 | |
| G435 | Gage GO .2780 - NO-GO .2820 | 1 | |
| G438 | Gage - GO .0280 - NO-GO .0330 | 2 | |
| G446 | Gage - GO .1540 - NO-GO .1580 | 2 | |
| G452 | Gage - GO .0680 - NO-GO .0730 | 2 | |
| G467 | Gage - GO .2580 - NO-GO .2620 | 2 | |
| G488 | Gage - GO .1315 - NO-GO .1385 | 2 | |
| G491 | Gage - GO .2765 - NO-GO .2835 | 2 | |
| G542 | Gage - GO .0230 - NO-GO .0280 | 2 | |
| G594 | Gage - GO .1181 - NO-GO .1200 | 2 | |
| G612 | Gage - GO .0830 - NO-GO .0890 | 2 | |
| G615 | Gage - GO .0845 - NO-GO .0915 | 2 | |
| G648 | Gage - GO .0520 - NO-GO .0580 | 2 | |
| G651 | Gage - GO .0380 - NO-GO .0400 | 2 | |
| G668 | Gage - GO .1680 - NO-GO .1740 | 2 | |
| G678 | Gage - GO .1080 - NO-GO .1170 | 2 | |
| G683 | Gage - GO .1980 - NO-GO .2060 | 2 | |
| G684 | Gage - GO .2500 - NO-GO .2580 | 2 | |
| G687 | Gage - GO .0530 - NO-GO .0580 | 2 | |
| G688 | Gage - GO .0825 - NO-GO .0875 | 2 | |
| G694 | Gage - GO .1710 - NO-GO .1780 | 2 | |
| G697 | Gage - GO .3510 - NO-GO .3580 | 2 | |
| G720 | Gage - GO .2078 - NO-GO .2120 -MS90486-8 | 2 | |
| G721 | Gage - GO .2378 - NO-GO .2420 - MS90486-6 | 2 | |
| G722 | Gage - GO .2968 - NO-GO .3010 - MS90486-4 | 2 | |
| G723 | Gage - GO .1678 - NO-GO .1720 - MS23003-8 | 2 | |
| G724 | Gage - GO .1998 - NO-GO .2040 -MS23003-6 | 2 | |
| G725 | Gage - GO .2518 - NO-GO .2560 - MS23003-4 | 2 | |
| G726 | Gage - GO .3368 - NO-GO .3410 - MS23003-1 | 2 | |
| G727 | Gage - GO .3678 - NO-GO .3720 -MS23003-01 | 2 | |
| G728 | Gage - GO .4018 - NO-GO .4060 - MS23003-02 | 2 | |
| G729 | Gage - GO .4708 - NO-GO .4750 - MS23003-04 | 2 | |
| G731 | Gage - GO .0700 - NO-GO .0830 | 2 | |
| G732 | Gage - GO .0800 - NO-GO .0840 | 2 | |
| G741 | Gage - GO .0760 - NO-GO .0820 | 2 | |
| G745 | Gage - GO .1720 - NO-GO .1800 | 2 | |
| G752 | Gage - GO .1110 - NO-GO .1270 - M81306/2-02F | 2 | |
| G756 | Gage - GO .2860 - NO-GO .2940 | 2 | |
| G770 | Gage - GO .0890 - NO-GO .0950 | 2 | |
| G771 | Gage - GO .1180 - NO-GO .1240 | 2 | |
| G772 | Gage - GO .1600 - NO-GO .1680 | 2 | |
| G776 | Gage - GO .0300 - NO-GO .0800 | 2 | |
| G795 | Gage - GO .1080 - NO-GO .1130 | 2 | |
| G801 | Gage - GO .3080 - NO-GO .3160 | 3 | |
| G805 | Gage - GO .0740 - NO-GO .0800 | 2 | |
| G818 | Gage - GO .0680 - NO-GO .0760 | 2 | |
| G819 | Gage - GO .0850 - NO-GO .0930 | 2 | |
| G821 | Gage - GO .1380 - NO-GO .1460 | 2 | |
| G833 | Gage - GO .3748 - NO-GO .3790 - MS90486-2 | 2 | |
| G834 | Gage - GO .4148 - NO-GO .4190 - MS90486-1 | 2 | |
| G835 | Gage - GO .4538 - NO-GO .4580 - MS90486-01 | 2 | |
| G836 | Gage - GO .4978 - NO-GO .5020 - MS90486-02 | 2 | |
| G837 | Gage - GO .5598 - NO-GO .5640 - MS90486-03 | 2 | |
| G838 | Gage - GO .6158 - NO-GO .6200 - MS90486-04 | 2 | |
| G842 | Gage - GO .1800 - NO-GO .1850 | 2 | |
| G855 | Gage - GO .4000 - NO-GO .4080 | 2 | |
| G876 | Gage - GO .1915 - NO-GO .1985 | 2 | |
| G885 | Gage - GO .1000 - NO-GO .1080 for DCT4-105 | 2 | |
| G886 | Gage - GO .0740 - NO-GO .0820 for DCT4-105 | 2 | |
| G90 | Gage - GO .0385 - NO-GO .0435 | 2 | |
| G917 | Gage - GO .1240 - NO-GO .1280 | 2 | |
| G919 | Gage - GO .0860 - NO-GO .0900 | 2 | |
| G931 | Gage GO 0.1260/0.0900/0.0760 - NO-GO 0.1380/0.1020/0.0880 | 2 | |
| G946 | Gage - GO .2085 - NO-GO .2155 | 2 | |
| G958 | Gage - GO .2260 - NO-GO .2280 | 2 | |
| G966 | Gage - GO .2580 - NO-GO .2680 | 2 | |
| G984 | GAGE G984 FOR Y888 | 2 | |
| GA47567-110-A | GAGE, PRESSURE, DIAL INDICATING NSN 6685-14-563-5048 | 1 | |
| GAGE-829A | GAGE 829A - STARETT HOLE | 1 | |
| GAGE-829B | GAGE 829B - STARETT HOLE | 1 | |
| GB704SR-8 | Gage Bilt - PowerMAX Split Riveter - (With 8 foot hose) | 1 | |
| GR-254527 / GR-255327 | JT8D-200 ENG GO,NO-GO GAGE | 1 | |
| GS-18019 | UNIVERSAL SURFACE GAGE. 18 LNCHES LONG. HARDENED STEEL BASE. WIDE RANGE, FINE ADJUSTMENT. WITH SCRIBER. | 1 | |
| GS8-752C-20 | GB713-NOSE ASSEMBLY ACCESSORIES (MFG : GAGEBILT DIA : 8/32 TYPE : STRAIGHT ) | 1 | |
| GSB3210001 | GAGE-GO - NO GO TEST (PROXIMITY SENSOR ELDEC 8SC0) | 1 | |
| GSB3210002 | GAGE-GO - NO GO TEST (PROXIMITY SENSOR ELDEC 8SC04) | 1 | |
| GSE5100758 | PUSH-PULL FORCE GAGE, (0 - 50 POUNDS)-GSE5100761 & GSE5100758 | 1 | |
| GSE5100761 | PUSH-PULL FORCE GAGE, (0 - 50 POUNDS)-GSE5100761 & GSE5100758 | 1 | |
| HG77-13A | PIN/COLLAR GAGE (FOR PINS 0.250 IN DIAMETER AND COLLARS, NAS1080C08) | 1 | |
| HG77-14A | PIN/COLLAR GAGE (FOR PINS 0.190 IN DIAMETER AND COLLARS, NAS1080C06) | 1 | |
| HU24462 | GAGE - THREAD (0.2500 IN - 28 THD/IN) | 3 | |
| HU24467 | GAGE - THREAD (0.5625 IN - 18 THD/IN) | 3 | |
| HU24468 | GAGE - THREAD (0.6250 IN - 18 THD/IN) | 3 | |
| IAE 2F10418 | IAE 2F10418 LENGTH GAGE | 1 | |
| IAE1P16186 | IAE 1P16186 GAGE BAR | 1 | |
| IAE1R18271 | IAE 1R18271 AIR PLUG GAGE | 1 | |
| IAE2M14187 | GAGE, INSPECTIONLHT DWG NO.(537200038) | 3 | |
| J27081-1 | GAGE - GO/NO GO (J27081-6 ASSY INCLUDED IN J27081-1 RIGGING EQUIPMENT - OUTBOARD TRAILING EDGE FLAPS) USED ON 777-200LR, -300ER AND 777F AIRPLANES. | 7 | |
| K27014-38 | 787 GAP GAGE TOOL | 9 | |
| LDI32-40 | KIT BRAKES PRESS. GAGES (8 GAUGES) | 1 | |
| LST52613 | TELESCOPING GAGE 1-1/4-2-1/8" | 1 | |
| LST52614 | GAGE, TELESCOPING 2-1/8-3-1/2 | 1 | |
| LST53078 | GAGES 830C | 1 | |
| LST67676 | BORE GAGE 2-2 5/8 | 1 | |
| LST67677 | BORE GAGE 2 5/8 - 3 1/4 | 1 | |
| LST68132 | BORE GAGE 1/2 - 5/8 | 1 | |
| LST68133 | BORE GAGE 5/8 - 3/4 | 1 | |
| M22520/3-1 | AF8 GAGE CRIMP TOOL(DMC) | 10 | |
| M22520/3-13 | GAGE G265 FOR Y540 & X528 | 1 | |
| M22520/3-14 | GAGE G266 FOR Y540 & X528 | 1 | |
| M22520/3-3 | GAGE G145 FOR MH860 | 1 | |
| M22520/6-002 | GAGE G186 FOR Y193 | 1 | |
| M22520/6-005 | GAGE G188 FOR Y189 | 1 | |
| M22520/6-006 | GAGE G185 FOR Y197 | 1 | |
| M22520/6-008 | GAGE G180 FOR Y197 Y205 Y680 | 1 | |
| M22520/6-031 | GAGE G208 FOR Y635 Y680 | 1 | |
| NB4504-D | GAGE - PRESSURE, TIRE 2 X INLINE ADAPTERS FOR SMALL 8V & LARGE 12V SIZE VALVES | 1 | |
| NB602672LONGCT | GAGE BLOCKS, RANGE: 0 TO 48 INCH, 8 PIECE SET, ACC | 1 | |
| NRK-3AST | Gage Set NSN 5280-01-352-1336(KIT INCLUDES AL, ST, AND TI STDS) *DO NOT USE THIS PART NUMBER, OURS IS RSN-3AST | 1 | |
| PPC1A | 2-5/8IN CHSL GAGE | 1 | |
| PT000821 | HPT VANE 2 DIMENSION B GAGE_[PT000821] | 1 | |
| PWA 102903 | INDICATOR GAGE (REPLACES PWA 102844) | 1 | |
| PWA 112010 | GAGE, HYDRAULIC PRESSURE − HYDRAULIC PUMP REPLACES 75048 | 1 | |
| PWA101089 | GAGE, GO-NO, GO_[PWA101089] | 1 | |
| PWA102903 | GAGE, INDICATOR (REPLACES PWA 102844) | 1 | |
| PWA25939 | GAGE - COMP STATOR 8,9TH VANE ANGLE_[PWA25939] | 1 | |
| PWA25978 | GAGE - IMC DRIVE GEAR_[PWA25978] | 2 | |
| PWA26008 | GAGE - AGB BALL BEARING,AXIAL PLAY_[PWA26008] | 2 | |
| PWA26647 | GAGE, BLADE WEAR - HPC 8TH STAGE_[PWA26647] | 2 | |
| PWA26648 | GAGE - BLADE, HPC 9TH STAGE_[PWA26648] | 2 | |
| PWA26683 | GAGE, BLADE WEAR - HPC 14TH STAGE_[PWA26683] | 2 | |
| PWA26684 | GAGE - BLADE WEAR, HPC 15TH STAGE_[PWA26684] | 2 | |
| PWA27287 | GAGE - HPT 1ST BLADE L/E EROSION_[PWA27287] | 1 | |
| PWA27850 | GAGE, STRETCH - LPC 2,3 & 4 TIERODS_[PWA27850] | 2 | |
| PWA27854B | GAGE - 2ND STG TURB VANE CLASSIFICATION_[PWA27854B] | 1 | |
| PWA28007 | GAGE, NO GO - FAN BLD INNER MIDSPAN_[PWA28007] | 1 | |
| PWA28008 | GAGE, NO GO - WEAR, 1ST FAN BLD H/FACE_[PWA28008] | 1 | |
| PWA28120 | GAGE, STRETCH - LPT SOLID TIEROD_[PWA28120] | 1 | |
| PWA28199 | GAGE - VANE ARM ANGLE CHECKING_[PWA28199] | 2 | |
| PWA28222 | GAGE, NO GO - HPC 5TH STAGE CHORD WIDTH_[PWA28222] | 1 | |
| PWA28223 | GAGE, NO GO - HPC 6TH STAGE CHORD WIDTH_[PWA28223] | 1 | |
| PWA28224 | GAGE, NO GO - BLADE, HPC 7TH STG CHORD_[PWA28224] | 1 | |
| PWA28225 | GAGE, NO GO - HPC 8TH STAGE CHORD WIDTH_[PWA28225] | 1 | |
| PWA28226 | GAGE, NO GO - HPC 9TH STAGE CHORD WIDTH_[PWA28226] | 1 | |
| PWA28227 | GAGE, NO GO - HPC 10TH STAGE CHORD WIDTH_[PWA28227] | 1 | |
| PWA28228 | GAGE, NO GO - HPC 11TH STG CHORD WIDTH_[PWA28228] | 1 | |
| PWA28229 | GAGE, NO GO - HPC 12TH STAGE CHORD WIDTH_[PWA28229] | 1 | |
| PWA28230 | GAGE,NO GO - HPC 13TH STG CHORD WIDTH_[PWA28230] | 1 | |
| PWA28231 | GAGE, NO GO - HPC 14TH STAGE CHORD WIDTH_[PWA28231] | 1 | |
| PWA28232 | GAGE, NO GO - HPC 15TH STAGE CHORD WIDTH_[PWA28232] | 1 | |
| PWA28241 | GAGES - Z.PLANE DIA 5TH STG COMPR DISK_[PWA28241] | 1 | |
| PWA28242 | GAGE - DISK, HPC 6TH STG Z-PLANE DIA._[PWA28242] | 1 | |
| PWA28243 | GAGE - DISKS,HPC 7TH~15TH STG Z-PL DIA._[PWA28243] | 1 | |
| PWA28251 | GAGE_[PWA28251] | 1 | |
| PWA28252D | GAGE, AXIAL DEFLECTION - LPT 4TH STG VAN_[PWA28252D] | 1 | |
| PWA28253 | GAGE, AXIAL DEFLECTION - LPT 5TH STG VAN_[PWA28253] | 1 | |
| PWA28254 | GAGE, AXIAL DEFLECTION - LPT 6TH STG VAN_[PWA28254] | 1 | |
| PWA28462 | GAGE,POSITION - MGB CSD TRANSFER TUBE_[PWA28462] | 3 | |
| PWA28648 | GAGE_[PWA28648] | 1 | |
| PWA28666 | GAGE_[PWA28666] | 2 | |
| PWA28678 | INSPECTION GAGE - MASTER BLADE_[PWA28678] | 2 | |
| PWA28694 | GAGE - LOW TURBINE POSITION_[PWA28694] | 1 | |
| PWA28818 | GAGE - FAN BLADE L/E & T/E THICKNESS_[PWA28818] | 2 | |
| PWA28939 | GAGE, POSITIONING - 3.0 BLEED CONTROL_DIA.12.7X261.6MM/0.225KG_[PWA28939] | 2 | |
| PWA29528 | GAGE_[PWA29528] | 1 | |
| PWA29681 | GAGE SET, AIRFOIL_[PWA29681] | 1 | |
| PWA29780 | GAGE - 3.0 BLEED FEEDBACK CABLE_27X25.4X12.7MM/0.225KG_[PWA29780] | 1 | |
| PWA29847 | GAGE_[PWA29847] | 2 | |
| PWA29875 | FILLER GAGE- FAN BLADE (JT9D-7Q)_[PWA29875] | 3 | |
| PWA29958 | GAGE_[PWA29958] | 1 | |
| PWA32163FAS | JT8D HUB GAGE ADAPTER (IN 0005378) | 1 | |
| PWA32668 | GAGE_[PWA32668] | 1 | |
| PWA33788 | GAGE_[PWA33788] | 1 | |
| PWA33789 | GAGE-N2 TACH DRIVE CHECK_[PWA33789] | 1 | |
| PWA75028 | HYDRAULIC PRESS GAGE - HPC FRONT HUB_TO MEASURE PRESS_254 X 254 X 76 MM / 0.5 KG_[PWA75028] | 6 | |
| PWA75208 | GAGE_[PWA75208] | 2 | |
| PWA75283 | GAGE_[PWA75283] | 1 | |
| PWA75828 | GAGE_[PWA75828] | 2 | |
| PWA76338 | B GAGE, BLADE_[PWA76338] | 1 | |
| PWA86141 | GAGE ( SB PW4ENG 72-227 REV1 )_203X76X25MM/0.5KG_[PWA86141] | 1 | |
| RSN-3AST | Gage Set NSN 5280-01-352-1336, Consist of 7075T6, 4340 & 6AL4V Standards | 1 | |
| S108-012 | CANOPY COVER, 108-3 models, over the top style, extends to cover baggage door | 1 | |
| S108-013 | CANOPY COVER, over top type, 108-3 models, extends to cover baggage door, extended to overlap with shortened Empennage Cover | 1 | |
| S108-014 | EXTENDED CANOPY COVER, 108-3 models, over-top type, extends to cover baggage door, extended to overlap with shortened Empennage Cover | 1 | |
| S108-825 | TRAVEL COVER, Light Weight Canopy Cover, 108-3 models, over the top style, extends to cover baggage door | 1 | |
| SITRANS P | DIFFERENTIAL PRESSURE GAGE (2.4 TO 240 INH2O (0.0867 TO 8.67 PSIG (0.597 TO 59.78 KPA)), ACCURACY: ±1% OF FULL SCALE) SIEMENS, SITRANS P, SERIES DSIII, TRANSMITTER MODEL 7MF4432-1EA22-1AC7-7 | 1 | |
| ST-23 | GAGE, VALVE CLEARANCE 0.028”-0.080” | 2 | |
| ST8711J-6 | Standard Tool, Gage Protrusion (AA PO# HM51839001) | 1 | |
| ST8712H-14-BB-K-B | US PROTRUSION GAGE, .875 BMIN | 1 | |
| ST8712H-14-BB-K-P | US PROTRUSION GAGE, .875 PMAX | 1 | |
| T-12520690 | PULLOVER GAGE W CONT 81MM | 1 | |
| T-12520694 | PULLOVER GAGE 81MM | 1 | |
| T2PP | PLUG, PIPE THREAD GAGEPORT(D18302 VALVE/REGULATORS) | 1 | |
| TA358 | 3/8IN DR TORQUE ANGLE GAGE | 1 | |
| TS1171 | TRIM TAB CABLE STOP TOOL NOTE A 3/8 INCH DRIVE SOCKET CAN BE MODIFIED TO ENGAGE THE SLOTS ON THE TRIM TAB CABLE STOP CASTELLATED NUT. THE MODIFIED SOCKET CAN BE USED AS A TORQUE ADAPTER INSTEAD OF THIS TOOL. (BEECHCRAFT CORP) | 2 | |
| TS1171 (SN# L20843, TOOL CODE # D928) | TRIM TAB CABLE STOP TOOL NOTE A 3/8 INCH DRIVE SOCKET CAN BE MODIFIED TO ENGAGE THE SLOTS ON THE TRIM TAB CABLE STOP CASTELLATED NUT. THE MODIFIED SOCKET CAN BE USED AS A TORQUE ADAPTER INSTEAD OF THIS TOOL. (BEECHCRAFT CORP) | 1 | |
| USGMODEL5080/5PSI | GAGE "USG" 47864 , USG Model 508 0/5psi | 1 | |
| WA23-101DA | Die Assembly - Use G856 GO-NO-GO Gage | 2 | |
| WAVEBRT100-1 | PADDLE GAGE BUT REMOVAL 3/8 | 1 | |
| WCI-CBG-06-3-N | COMBINATION GAGE, 1/4" 1ST OVERSIZE Ø.2350-.2380 , Ø.2390 | 2 | |
| WCI-CBG-08-1-N | COMBINATION GAGE, 1/4" 1ST OVERSIZE Ø.2350-.2380 , Ø.2390 | 2 | |
| WCI-CBG-08-3-N | COMBINATION GAGE, 5/16" NOMINAL Ø.2830-.2860 , Ø.2870 | 2 | |
| WCI-FR-04-2-N-1590-RA | RIGHT ANGLE GAGE FINISH REAMER (0.1580" - 0.1600") | 1 | |
| WCI-FR-04-4-N-1770-RA | RIGHT ANGLE GAGE FINISH REAMER (0.1760" - 0.1780") | 1 | |
| WCI-FR-04-4-N-1845 | GAGE REAMER .1870/.1850 | 1 | |
| WCI-FR-04-4-N-1856 | GAGE REAMER .1870/.1850 | 1 | |
| WCI-FR-04-4-N-1870 | GAGE REAMER .1870/.1850 | 1 | |
| WCI-FR-06-0-N-1850 | GAGE REAMER .1870/.1850 | 2 | |
| WCI-FR-06-0-N-1850-RA | RIGHT ANGLE GAGE FINISH REAMER (0.184" - 0.186") | 2 | |
| WCI-FR-08-0-N-2450 | GAGE REAMER .2480/.2450 | 1 | |
| WCI-FR-08-0-N-2465-RA | RIGHT ANGLE GAGE FINISH REAMER. (0.246" - 0.248") | 2 | |
| WCIS-WG-08-3-N | GAGE, MANDREL CHECK (0.2783) | 2 | |
| Y550 | Die Set #8 - Uses G664 Gage | 3 | |
| Y631 | Die Set - M22520/5-105 - Use G668 & G190 Gage | 5 | |
| 38DL PLUS | THICKNESS GAGE,ULTRASONIC,RANGE 0.080MM | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
