| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| WA23-10 | GAGE 6 | 3 | |
| WA23-130DA | GAGE 6 | 3 | |
| WA23-132L | GAGE 6 | 3 | |
| WA23-3 | GAGE 6 | 3 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 06-042-D | STRUT GAGE( 06-042-D) | 1 | |
| 106 | GAGE,DEPTH,MICROMETER;2.500";PROVIDED;0.0010";MULTIPLE ROD; 0.000 TO 6.000";NOT INCLUDED;6;1/8 IN. DIA;| | 1 | |
| 1066 | GAGE ELEMENT (50 TO 600 PSI) | 1 | |
| 060178 | Sensor Gaged MTX 160z | 1 | |
| 1082-00-20 | GAGE, HYDRAULIC PRESSURE: 0 TO 20 PSIG (138 KPAG) ,0 TO 100 PSIG (690 KPAG),0 TO 250 PSIG (1724 KPAG),0 TO 300 PSIG (2069 KPAG),0 TO 600 PSIG (4137 KPAG) AND 0 TO 5000 PSIG (34475 KPAG) | 1 | |
| 1159GSE50029 | GAGE PIN, 0.562 INCH DIAMETER | 1 | |
| 12-05372 | GAGE ELEMENT (50 TO 600 PSI) | 1 | |
| 139-00-115-01 | BAGGAGE BAR 2226 | 1 | |
| 14-6805-6010 | NITROGEN PRESSURE GAGE(GSE1220206 OR EQUIVALENT) | 20 | |
| 14-6807-6011 | GAGE - TIRE PRESSURE, 0-300 PSIG (0-2069 KPA), STD-1132 | 19 | |
| 1409-161948 | GAGE PRESSURE 0-60PSI | 1 | |
| 1409-161950 | GAGE PRESSURE 0-160 PSI | 1 | |
| 1409-161953 | GAGE PRESSURE 0-600 PSI | 1 | |
| 155-903 | MITUTOYO 5/16 IN A 6 IN SET DE 6 PIEZAS TELESCOPICO GAGE SET | 3 | |
| 155-907 | TELESCOPING GAGE SET 0.313-6” | 1 | |
| 15F2800 | CART - BAGGAGE - 60 INCH X 120 INCH OPEN STYLE WITH REMOVABLE END PANELS - 8,000 LB CAPACITY | 1 | |
| 186 | STARRETT® #1 thru #60 EZ Read Drill Gage- USA MADE! | 1 | |
| 187 | STARRETT® Fractional 1/16" thru 1/2" EZ Read Drill Gage- USA MADE! | 3 | |
| 19286-0370 | Imperium™ Cable Assembly Inspection Gage for Receptacle Harness Assembly Kits for 1/0 and 1 AWG cables, 171466 series. | 1 | |
| 2.0625-16-UNS-3B-NO-GO | GAGE - 2\.0625-16-UNS-3B NO GO/2\.0272 PITCH DIA (FOR ST | 1 | |
| 20-1000-01B160 | GAGE,PRESSURE,DIAL 0-160PSI | 1 | |
| 206P4 | GAGE FINISH REAMER FTI TOOLS (46 DEGREES) | 1 | |
| 210-004 | CANOPY COVER, Wrap-Around, (late mod's, no struts, 1967 G-model & up, ext. to cover baggage door) | 1 | |
| 210-007 | CANOPY COVER, Wrap-Around (early mod's, with struts, with rear window, 1962-66, aft extension over baggage door) | 1 | |
| 210-009 | CANOPY COVER, over top type, B thru F models, 1962-66, aft extension over baggage door | 1 | |
| 210-013 | EXTENDED CANOPY COVER, over-top type, 1962-66: w/struts, w/rear window), extends to cover baggage door | 1 | |
| 210-806 | TRAVEL COVER, Light Weight Canopy Cover, Wrap-Around, (late mod's, no struts, 1967 G-model & up, ext. to cover baggage door) | 1 | |
| 2141-202 | GAGE,DEPTH,DIGITAL DISPLAY;|DIGITAL D GAUGE;FOR TOOL STORE FOR SERVICE HELI BELL 206 / 429;WWW.INSIZE.COM; | 1 | |
| 232 | FEELER GAGE SET 15 PC 6 L .0020 - .025 | 4 | |
| 11851 | GAGE G189 FOR Y216 | 1 | |
| 231846 | PPG Semco 231846 15 Gage 1 Orange Sem-Luer Needle | 1 | |
| 231856 | PPG Semco 231856 21 Gage 1 Green Sem-Luer Needle | 1 | |
| 231860 | PPG Semco 231860 23 Gage 1 Light Blue Sem-Luer Needle | 1 | |
| 231863 | PPG Semco 231863 25 Gage 12 Blue Sem-Luer Needle | 1 | |
| 231864 | PPG Semco 231864 25 Gage 1 Blue Sem-Luer Needle | 1 | |
| 231866 | PPG Semco 231866 26 Gage 12 Peach Sem-Luer Needle | 1 | |
| 231867 | PPG Semco 231867 27 Gage 516 Tan Sem-Luer Needle | 1 | |
| 231869 | PPG Semco 231869 30 Gage 516 Lavender Sem-Luer Needle | 1 | |
| 232736 | PPG Semco 232736 20 Gage 1 Yellow Sem-Flex Needle | 1 | |
| 232893 | PPG Semco 232893 26 Gage 18 Peach Sem-Flex Needle | 1 | |
| 2566824 | DEPTH GAGE (CAGE: 06848) | 1 | |
| 2685742-G-4 | BOBBER GAGE (CAGE: 06848) | 1 | |
| 269B | STARRETT 269B TAPER GAGE ( 0.5” - 1 “ ) | 2 | |
| 269B12 | CherryMAXIBOLT 269B12 Lockbolt Grip Gage | 2 | |
| 269C3 | CherryMaxCherryLOCK 269C3 Grip Selector Gage | 10 | |
| 2900-51R | RIVET HEIGHT GAGE - 2900-5-1R W/683-3 BODY | 1 | |
| 297292-1 | (NSN: 5220-01-687-5924), GAGE, RING, MASTER SETTING | 1 | |
| 298108-1 | FAN SHAFT STRETCH GAGE [PRE SB TFE731-72-3637 | 1 | |
| 2C14656G02 | 6 BRG. AND SEALS GAGE | 3 | |
| 2C6542 | (RT) GAGE,INSP-HPCR-STG 14-16 | 1 | |
| 2C6613G01 | GAGE BHGE 2C6613G01, IMMERSION DEPTH USED IN WP 1516 00 SPECIAL TOOL FOR IGNITER PLUG REPLACEMENT | 10 | |
| 2C6962G05 | GAGE SIGHT (CF6-6,-50,-80A,-80C2,-80E1 | 8 | |
| 2C6966G05 | GAGE, SIGHT - COMPRESSOR STATOR VANE ACT ARMS 2C6966G05 | 7 | |
| 2C6966G07 | GAGE, SIGHT BHGE 2C6966G07 FOR VSV ACTUATION ARMS USED IN WP 4028 00 SPECIAL TOOL FOR HIGH PRESSURE COMPRESSOR IGV AND VSV VISUAL INDPECTION | 3 | |
| 2C7549G03 | Comp. Blade Length Gage (CF6-80A3) | 1 | |
| 2C8016 | GAGE,SIGHT-VARIABLE STATOR VANE-STG 5 AND 6 | 2 | |
| 2C8016 REV A | GAGE, SIGHT-VARIABLE STATOR VANE STG. 5 & 6 | 1 | |
| 2C8016G02 | GAGE, SIGHT - VSV STAGES 5 AND 6 ACTUATION ARMS | 4 | |
| 2C8016G03 | GAGE,SIGHT-VARIABLE STATOR VANE-STG 5 AND 6 | 2 | |
| 2C80616G01 | GAGE,SIGHT-VARIABLE STATOR VANE-STG 5 AND 6 | 1 | |
| 2C80I6 | GAGE, SIGHT-VARIABLE STATOR VANE STG. 5 & 6 | 1 | |
| 30386-0035 | FORCE GAGE_[30386-0035] | 1 | |
| 35-1009-SW-02L-200PSI | PRESSURE GAGE (2 REQUIRED (0 TO 300 PSIG (0 TO 2068 KPA), ±1% OF FULL SCALE) (ASHCROFT) | 1 | |
| 350A91-0211-01/PHP | SHACKLE, GAGE 16 | 1 | |
| 3648-260 | HARDENED BASE EXTENSION 260 MM USED FOR 3753 SERIES ELECTRONIC DEPTH GAGES STARRETT PART NO: 3648-260 | 1 | |
| 3C-681-25 | GAGE BILT 3C-681-25 Straight Non Self-Releasing 332 Blind Rivet Pulling Head | 1 | |
| 4001256-1 | BEARING ALIGNMENT & GAP GAGE [ P/N CMM : AM29363 ] | 1 | |
| 442124-G-1 | GO-GAGE (CAGE: 06848) | 1 | |
| 456MAX-704-43OS | GAGE BILT OFFSET PULLING HEAD FOR GBP704 GUN456MAX-704-43OS | 4 | |
| 456MAX-751D-54RA | ANGLE NOZZLE 3/16, GAGE BILT | 2 | |
| 4697 | GAGE POSITIONER (MS3196-1) | 1 | |
| 46647 | CRIMP TOOL SIZE GAGE 16-22 | 1 | |
| 492037Z146105 | RE-ENGAGEMENT TOOL - BUSHING (856A3924G01) | 1 | |
| 50-590158-5 | FEELER GAGE (OR PWC 30364) | 1 | |
| 516-126 | GAGE BLOCK SET_[516-126] | 1 | |
| 52-32-TOOL-01 | TEFLON GAGES (0.6 AND 0.7 INCH) | 1 | |
| 60-1125-SW-02L-200PSI | DIFFERENTIAL PRESSURE GAGE (0 TO 300 PSIG (0 TO 2068 KPA), ±1% OF FULL SCALE) (ASHCROFT) | 1 | |
| 6000 | POSITECTOR 6000 MIL GAGE | 1 | |
| 59230 | CRIMPER CRIMP 16 GAGE. | 1 | |
| 612179 | MULTIPURPOSE PIN CRIMPER 16 TO 22 GAGE. | 2 | |
| 612962 | DIE SET, CHS-GAGE:AGM06003 FO | 1 | |
| 614824 | DIE SET, SPECIAL-GAGE AGM06006 | 1 | |
| 620667-G | GAGE-FOR 620667 | 1 | |
| 620770-G | GAGE-FOR 620770 DIE | 1 | |
| 620784-G | GAGE-FOR 620784 DIE | 1 | |
| 620963-G | GAGE-FOR 620963 DIE | 1 | |
| 620964-G | GAGE-FOR 620964 DIE | 1 | |
| 620988 | DIE SET (M/5)-GAGES: AGM06009, | 1 | |
| 621053 | GAGE (M22520/3-6) | 1 | |
| 621068 | GAGE (MS3196-20) | 1 | |
| 621071 | GAGE (MS3196-20A) | 1 | |
| 621072 | GAGE (MS3196-16A) | 1 | |
| 621073 | GAGE (MS3196-12A) | 1 | |
| 621074 | GAGE (MS3196-3) | 1 | |
| 630067 | DIE SET (PIC)-GAGE: AGM06029 | 1 | |
| 630129-GA | GAGE, FOR 630129 4.95MM | 1 | |
| 630129-GB | GAGE, FOR 630129 5.5MM | 1 | |
| 630130-GB | GAGE, FOR 630130 (.270 HEX) | 1 | |
| 630145-G | GAGE, FLAT, FOR .165 HEX | 1 | |
| 630147-1GA | GAGE, FOR 630147-2 | 1 | |
| 630147-2GB | GAGE, FOR 630147-2 | 1 | |
| 631027-GB | GAGE, FLAT, FOR .056 HEX | 1 | |
| 64AAB477R | Mitutoyo 64AAB477R MeasurLink 8 Gage R&R | 1 | |
| 64AAB478R | Mitutoyo 64AAB478R MeasurLink 8 Gage Management | 1 | |
| 65425-101 | MASTER GAGE/ADAPTER ASSEMBLY 65425-101 | 1 | |
| 660005 | GAGE (MS3197-16X1) | 1 | |
| 660006 | GAGE (MS3197-16Y1) | 1 | |
| 660020 | GAGE-FOR M/1-01 USE SEL. #6 | 1 | |
| 660028 | GAGE-FOR M/2-01 USE SEL.#6 | 1 | |
| 660032 | GAGE-FOR M/7-01, USE SEL 6 | 1 | |
| 67514-101 | ENVELOPE GAGE, D31516-XXX | 1 | |
| 67515-101 | ENVELOPE GAGE, AFT DOOR D31517-( ) 67515-101 | 1 | |
| 67808-101 | ENVELOPE GAGE, AFT DOOR D30665-() | 2 | |
| 67809-101 | ENVELOPE GAGE, FORWARD DOOR D30664-() | 2 | |
| 6799579 | GAGE KIT – P D DIAL BORE, INTERNAL SPLINE (WITH 6 SPLINE MASTERS & STORAGE CASE) | 1 | |
| 6808-101 | ENVELOP GAGE AFT DOOR D30665-() | 1 | |
| 6C681-25 | NOSE ASSEMBLY - ;GAGE BILT (BACB30VX6P04U) | 1 | |
| 6T112X6 | LIFT-ALL 6" X 6 FT TYPE 1 ROUGHNECK WIRE MESH SLING - 12 GAGE - 4800 LBS WLL | 3 | |
| 6T212X6 | SLING - HOT BRAKE, TYPE 1, WIRE MESH, GALVANIZED HIGH CARBON;6 IN. WIDE, 12 GAGE, 6FT LONG MESH, 7FT LONG OVER ALL. | 3 | |
| 703A91-021 1-00 | SHACKLE, GAGE 16 | 1 | |
| 703A91-0211-00 | SHACKLE, GAGE 16 | 1 | |
| 703A91021101 | SHACKLE, GAGE 16 | 1 | |
| 704006 | Gage Bilt Powermax Riveter - Pulling Head Extension - 6" | 1 | |
| 856A1050G02 | FIXT INSPECT SHIM 3-6" DEPTH GAGE | 1 | |
| 856A1068 | CFM56 - GAGE, LOCKING LUG - COMPRESSOR ROTOR ASSEM | 1 | |
| 856A1068G02 | CFM56 - GAGE, LOCKING LUG - COMPRESSOR ROTOR ASSEM | 11 | |
| 856A1260P01 | GAGE ID INTERSTAGE SEAL HPCS FOR REPAIR OF HPC REAR CASE OF CFM56-7B ENGINE | 6 | |
| 856A1809G01 | CFM56-7 BLADE CHORD INSPECTION GAGE | 5 | |
| 856A180PG01 | CFM56-7 BLADE CHORD GAGE | 1 | |
| 856A1814G01 | CFM56-7 BLADES, GAGE EDGE THICKNESS | 8 | |
| 856A2676G01 | CHECK FEELER GAGE - LPT (FEELER GAGE)OBSELETE REPLACED BY 856A2676G02 | 1 | |
| 856A3408G02 | GAGE - MASTER, VBV DOOR SETTING YOKE - CFM56-3 ENGINE | 13 | |
| 856A3629P02 | GAGE - INSPECTION, UNACCEPTABLE SCALING AREA - CFM56-3 ENGINE | 11 | |
| 8600393 | PROTRUSION GAGE-ROLLS-ROYCE 8600393 | 1 | |
| 88-700 | Gage Set for MH860, M22520/7-01 | 2 | |
| 90-PG6000 | Bowers 90-PG6000 Gagemaker Internal Thread Roll Gauge 2 1/2" Reach Range 1 1/2 - 9" | 1 | |
| 90-PG6001 | Bowers 90-PG6001 Gagemaker Internal Thread Roll Gauge 2 1/2" Reach Range 9 - 16" | 1 | |
| 90-PG6002 | Bowers 90-PG6002 Gagemaker Internal Thread Roll Gauge 2 1/2" Reach Range 16 - 24" | 1 | |
| 90-RG7003 | Bowers 90-RG7003 Gagemaker External Thread Roll Gauge Range 12-16" | 1 | |
| 90-RG7004 | Bowers 90-RG7004 Gagemaker External Thread Roll Gauge Range 16-20" | 1 | |
| 90-SPG6000 | Bowers 90-SPG6000 Gagemaker Internal Thread Roll Gauge 1" Reach Range 5/8 - 1 1/2" | 1 | |
| 90-TP-3.5-2-50 | Bowers Profile Gage 3 1/2" - 6 5/8" Hughes H-90 | 1 | |
| 90-TP-4-2-50 | Bowers Profile Gage 6 5/8" API REG | 1 | |
| 90-TRA-16P | Bowers 90-TRA-16P Gagemaker Thread Roll ACME 16 Pitch (Set of 2) | 1 | |
| 90-TRA-6P | Bowers 90-TRA-6P Gagemaker Thread Roll ACME 6 Pitch (Set of 2) | 1 | |
| 90-TRB74516P | Bowers 90-TRB74516P Gagemaker Thread Rolls 16mm Pitch | 1 | |
| 90-TRB7456P | Bowers 90-TRB7456P Gagemaker Thread Rolls 6mm Pitch | 1 | |
| 90-TRSA-16P | Bowers 90-TRSA-16P Gagemaker Thread Roll Stub ACME 16 Pitch | 1 | |
| 90-TRSA-6P | Bowers 90-TRSA-6P Gagemaker Thread Roll Stub ACME 6 Pitch | 1 | |
| 90-TRVE-6P | Bowers 90-TRVE-6P Gagemaker Thread Roll External 6 Pitch | 1 | |
| 9093 | All Metal Drill Gage - #1-60 - MADE IN THE USA! | 1 | |
| 9429M94P01 | (LINIGAGE SYSTEM, 120V); W/WINDOWS-BASED LGWAS & (1) 20' 5506-1800 PROBE | 1 | |
| 98F27808205002 | CENTER-GAGE-SLAT, TR.16 (A340-500/600) | 1 | |
| 98F27808205003 | CHECK-GAGE-SLAT, TR. 16 (A340-500/600) | 1 | |
| 9C1022G01 | DEPTH GAGE_(0.5 ~ 6) INCH_[9C1022G01] | 1 | |
| A005414D | CART - BAGGAGE - 60 INCH X 120 INCH OPEN STYLE WITH REMOVABLE END PANELS - 8,000 LB CAPACITY | 1 | |
| A12007-20 | GAGE - TIRE PRESSURE INFLATOR - TIRE GAUGE - TIRE PRESSURE, 0-300 PSIG (0-2069 KPA), /- 3 PSIG ACCURACY | 7 | |
| A12007-23 | GAGE - TIRE PRESSURE INFLATOR - TIRE GAUGE - TIRE PRESSURE, 0-300 PSIG (0-2069 KPA), /- 3 PSIG ACCURACY | 10 | |
| A1290-6G | GAGE (FOR A1290-6) | 1 | |
| A25008 | B767 LUGGAGE BIN EQUIP TOOL | 1 | |
| A25020-8 | GAGE767, INSPECTION SEAT TRACK | 25 | |
| A27001-1 | RUDDER GAGE-SET B767 | 9 | |
| A27001-2 | INBD AILERON GAGE SET B767 | 3 | |
| A27001-3 | ELEVATOR GAGE SET. B767 | 7 | |
| A27001-4 | OUTBD AILERON GAGE SET B767 | 7 | |
| A27062-12 | GAGE ASSEMBLY (4 IT) & (EQ A27062-1A) | 1 | |
| A322-1 | CRIMP TOOL, 22-26 GAGE | 1 | |
| A768-210-30 | DIAL INDICATING PRESSURER GAGE (NSN 6685013269186) | 1 | |
| AGM06001 | GAGE (EQUIVALENT TO M22520/6-001) | 1 | |
| AGM06002 | GAGE (EQUIVALENT TO M22520/6-002) | 1 | |
| AGM06003 | GAGE (EQUIVALENT TO M22520/6-003) | 1 | |
| AGM06004 | GAGE (EQUIVALENT TO M22520/6-004) | 1 | |
| AGM06005 | GAGE (EQUIVALENT TO M22520/6-005) | 1 | |
| AGM06006 | GAGE (EQUIVALENT TO M22520/6-006) | 1 | |
| AGM06007 | GAGE (EQUIVALENT TO M22520/6-007) | 1 | |
| AGM06008 | GAGE (EQUIVALENT TO M22520/6-008) | 1 | |
| AGM06009 | GAGE, (EQUIVALENT TO M22520/6-009) | 1 | |
| AGM06010 | GAGE (EQUIVALENT TO M22520/6-010) | 1 | |
| AGM06011 | GAGE (EQUIVALENT TO M22520/6-011) | 1 | |
| AGM06013 | GAGE (EQUIVALENT TO M22520/6-013) | 1 | |
| AGM06014 | GAGE (EQUIVALENT TO M22520/6-014) | 1 | |
| AGM06015 | GAGE (EQUIVALENT TO M22520/6-015) | 1 | |
| AGM06016 | GAGE (EQUIVALENT TO M22520/6-016) | 1 | |
| AGM06017 | GAGE (EQUIVALENT TO M22520/6-017) | 1 | |
| AGM06019 | GAGE (EQUIVALENT TO M22520/6-019) | 1 | |
| AGM06020 | GAGE (EQUIVALENT TO M22520/6-020) | 1 | |
| AGM06022 | GAGE (EQUIVALENT TO M22520/6-022) | 1 | |
| AGM06025 | GAGE (EQUIVALENT TO M22520/6-025) | 1 | |
| AGM06027 | GAGE (EQUIVALENT TO M22520/6-027) | 1 | |
| AGM06028 | GAGE (EQUIVALENT TO M22520/6-028) | 1 | |
| AGM06029 | GAGE (EQUIVALENT TO M22520/6-029) | 1 | |
| AGM06031 | GAGE (EQUIVALENT TO M22520/6-031) | 1 | |
| AK2061-GB | GAGE, .068 HEX CAVITY | 1 | |
| AMT23003DA | DIE ASSEMBLY (M22520/23-03) 6 GAGE | 1 | |
| AMT23006DA | DIE ASSEMBLY (M22520/23-06) 2/0 GAGE | 1 | |
| AMT23010L | LOCATOR (M22520/23-10) 6 GAGE | 1 | |
| AMT23130DA | DIE ASSEMBLY, 6 GAGE | 1 | |
| AMT23166L | LOCATOR, 4-6 GAGE | 1 | |
| AMT23170DA | DIE ASSEMBLY, 16 GAGE | 1 | |
| AMT23225L | LOCATOR, 16 GAGE | 1 | |
| AMT23298L | LOCATOR, 4-6 GAGE | 1 | |
| AMTG2306 | GAGE-FOR M22520/23-06 | 1 | |
| AMTG23168 | GAGE-FOR AMT23168DA | 1 | |
| AMTG23264 | GAGE-FOR AMT23264DA | 1 | |
| AMTG4301 | Gage Go/No-Go Size 22-16 - M22520/43-01 | 2 | |
| AMTG4302 | Gage Go/No-Go Size 16-14 - M22520/43-02 | 2 | |
| AMTG4303 | Gage Go/No-Go Size 22-16 - M22520/43-03 | 2 | |
| AMTG4304 | Gage Go/No-Go Size 16-14 - M22520/43-04 | 2 | |
| AT 0016 | CONTACT GAGE (16 GA.) | 1 | |
| AT1020 | INSERTION TOOL 16 GAGE DEUTSCH ENGINE INSTALLATION PLUGS. | 2 | |
| ATA 1102 | INSERTION TOOL, 16 GAGE | 1 | |
| ATBO 1105 | TWEEZER, INSERTION (16 GAGE) | 1 | |
| ATBO 2105 | TWEEZER, REMOVAL (16 GAGE) | 1 | |
| ATBX 1-6781 | PLIER, INSERTION, 16 GAGE | 1 | |
| ATBX 1-7345 | PLIER, INSERTION, 16 GAGE | 1 | |
| ATBX 1-8107-16 | PLIER, INSERTION, 16 GAGE | 1 | |
| ATC-3076 | RETENTION TEST TOOL 16 GAGE | 3 | |
| ATGH 1106 | TWEEZER, INSERTION, 16 GAGE | 1 | |
| ATGH 2102 | TWEEZER, REMOVAL 16 GAGE | 1 | |
| ATGH 2106 | INSERTION/REMOVAL TOOL, 16 GAGE | 1 | |
| ATGH 2111 | TWEEZER, REMOVAL 16 GAGE | 1 | |
| ATK6000 | GAGE KIT (MS3196-2) | 1 | |
| B27045-51 | SHIM GAGE -6 | 1 | |
| BAR 0-6 | GAGE 0-6 TO 2C14711G01 | 1 | |
| C32051-1 | SET, GAGE - HYDRAULIC BRAKE SYSTEM, PRESSURE CHECKING_WEIGHT : 75 LBS, DIMENSION : 16 X 27 X 28” | 8 | |
| C36001-3 | 60 PSI GAGE ASSY | 3 | |
| C54007-1 | Feeler gage-CFM56-7 strut to wing | 6 | |
| C54007-2 | FEELER GAGE CFM56-7 STRUT TO WING | 1 | |
| CAL-36/4 | CAL-36/4-UNK (TORQUIMETER NOTCH GAGE) | 4 | |
| CB3G-6-0-N-1 | FATIGUE CB3G-6-0-N-1 ASSEMBLY, COMBINATION GAGE | 1 | |
| CBMG-20-1-N | GAGE MANDREL CHECK 0.6053 | 2 | |
| CBMG-20-3-N | GAGE MANDREL CHECK 0.6396 | 1 | |
| CBMG-4-4-N | GAGE, MANDREL CHECK(0,1648) | 3 | |
| CBMG-6-2-N | GAGE, MANDREL CHECK (0.2064) | 4 | |
| CBMG-8-2-N | GAGE, MANDREL CHECK (0.2611) | 4 | |
| CBMG12-1N | GAGE, MANDREL CHECK (0.3690) | 2 | |
| CBMG4-4N | GAGE, MANDREL CHECK (0.16) | 3 | |
| CBR-4-2-N-1 | GAGE REAMER .1610/.1590 | 1 | |
| CBR-4-2-N-RA-.1590 | RIGHT ANGLE GAGE FINISH REAMER (0.1580" - 0.1600") | 1 | |
| CBR-4-4-N-RA-.1770 | RIGHT ANGLE GAGE FINISH REAMER (0.1760" - 0.1780") | 1 | |
| CBR-6-0-N-RA-.1850 | RIGHT ANGLE GAGE FINISH REAMER (0.184" - 0.186") | 2 | |
| CBR-6-2-N-RA-.2150 | RIGHT ANGLE GAGE FINISH REAMER (0.215" - 0.216") | 1 | |
| CBR-8-0-N-RA-.2465 | RIGHT ANGLE GAGE FINISH REAMER. (0.246" - 0.248") | 1 | |
| CBR-8-1-N-RA-.2620 | RIGHT ANGLE GAGE FINISH REAMER (0.261" - 0.263") | 1 | |
| CGC-06X-3B | KATO TANGLESS GAGE WORKING 3B SIZE 6-32 REF. CGC-06X-3B | 1 | |
| CGF-5X-3B | KATO TANGLESS GAGE WORKING 3B SIZE 5/16-24 REF. CGF-5X-3B | 1 | |
| CGF-6X-3B | KATO TANGLESS GAGE WORKING 3B SIZE 3/8 -24 REF. CGF-6X-3B | 1 | |
| CGF-7X-3B | KATO TANGLESS GAGE WORKING 3B SIZE 7/16-20 | 1 | |
| D-4000 | FEDERAL DIMENSION AIR GAGE ( WITH SETTING RING ADN AIR PLUG) OR EQUIVALENT 1.1268 SETTING RING 1.1268 AIR PLUG | 1 | |
| D12-9892-04 | GAGE #6 3/8" INSPECTION | 5 | |
| D12-9892-06 | INSPECTION GAGE 06 | 6 | |
| D12-9892-16 | INSPECTION GAGE 16 | 1 | |
| DBS-2102 | Hand Operated .250 Wide One-Step Band Application Tool M81306/1A with Gage and Tension Key | 2 | |
| DBS-2202 | Hand Operated .125 Wide One-Step Mini-Band Application Tool M81306/1B with Gage and Tension Key | 2 | |
| DBS-CG2A | M81306/2-01E Verification Set which includes DBS-CG2 and G691 Gage | 2 | |
| DBS-CG3A | M81306/2-02F Verification Set which includes DBS-CG3 and G752 Gage | 2 | |
| DM012 | DIAL DEPTH GAGE 643 | 1 | |
| DMC199 | DMC199 - MH860 with Postioner & Gage Tool Kit | 2 | |
| DMC5033 | Tool Kit with EMC3300, 6 Nest & Indent Dies, & Applicable Gages (DMC5000 Series) | 1 | |
| DPP-500G | DIAL P/P GAGE_26.5X13X7.5CM,0~500GRAMS_[DPP-500G] | 1 | |
| DPPH-100 | GAGE - DIAL PUSH/PULL MODEL DPPH-100 (PART # DPPH-100, SUPPLIER 92456)(S-54-062-03-01, S-54-062-03-02, S-54-062-03-03, S-54-062-03-04) | 2 | |
| DR9415 | Starrett S3089MZ-181-160J BORE GAGE | 1 | |
| E1440 | DIAL GAGE 2.5" 0-160 PSI CENTRAL CONNECTION 1/4NPT | 1 | |
| EN837-1 | GAGE 0-60 BAR | 2 | |
| F28276000 | ADJUSTMENT TOOL WITH SETTING SHIMS (GS48354 GS48363) AND GAGE T47948 | 1 | |
| F70284-1 | SPL-1625 Wear Gage Set - Ground Power Plug and Receptacle 737-600, -700, -800 | 28 | |
| FB326B | 26 FLR/IGN GAGE (.008-.035") | 1 | |
| FFL72646400 | 1.4IN-6IN DIAL BORE GAGE | 1 | |
| FFL74554630 | 0?6IN/150MM OUTSD CALIP GAGE | 1 | |
| FMG-647-30010-B | GAGE, MANDREL CHECK (1.6859) | 1 | |
| FTE-01-35-14000 | AILERON SETTING GAGE STA.3860 | 1 | |
| FTE-03-35-14000 | AILERON SETTING GAGE STA.5660 | 1 | |
| FTE-04-35-34000 | RUDDER SETTING GAGE STA.1362.5 | 1 | |
| FTE01-35-13000-1/2 | INNER FLAP SETTING GAGE STA.1600 | 1 | |
| FZ9-24-600 | GAGE,PRESSURE,DIALINDIATING (600 PSI) | 8 | |
| G1001 | Gage - GO .0360 - NO-GO .0410 for M309 | 2 | |
| G1004 | Gage - GO .0610 - NO-GO .0660 for M309 | 2 | |
| G1005 | Gage - GO .0690 - NO-GO .0740 for M309 | 2 | |
| G1006 | Gage - GO .0760 - NO-GO .0810 for M309 | 2 | |
| G1007 | Gage - GO .0860 - NO-GO .0950 for M309 | 2 | |
| G1122 | Gage GO .0360 - NO-GO .0410 | 2 | |
| G1152 | GAGE- GO.1270 - NO-GO.1350- Use w/ HD51-116N & -120N | 2 | |
| G1153 | GAGE- GO.1860 - NO-GO.1940- Use w/ HD51-117N & -121N | 2 | |
| G1154 | Gage GO .0760 - NO-GO .0810 | 2 | |
| G1155 | Gage - GO .3160 - NO-GO .3240 - Use w/ HD51-124N & -125N | 2 | |
| G120 | Gage - GO .0960 - NO-GO .1000 - M22520/3-2 | 2 | |
| G1262 | Gage for TE 576783 Wire Barrel | 2 | |
| G1263 | Gage - GO NO-GO for TE 576783 Insulation | 2 | |
| G140 | Gage - GO .1420 - NO-GO .1460 | 2 | |
| G145 | Gage - GO .0410 - NO-GO.0460 - M22520/3-3 | 2 | |
| G150 | Gage - GO .1015 - NO-GO .1085 - M22520/6-001 | 2 | |
| G155 | Gage - GO .1245 - NO-GO .1315 - M22520/6-003 | 2 | |
| G160 | Gage - GO .0645 - NO-GO .0715 - M22520/6-029 | 2 | |
| G165 | Gage - GO .4255 - NO-GO.4325 - M22520/6-022 | 2 | |
| G170 | Gage - GO .2515 - NO-GO.2585 - M22520/6-011 | 2 | |
| G175 | Gage - GO .3395 - NO-GO .3465 - M22520/6-018 | 2 | |
| G180 | Gage - GO .2095 - NO-GO .2165 - M22520/6-008 | 2 | |
| G185 | Gage - GO .1745 - NO-GO .1815 - M22520/6-006 | 2 | |
| G186 | Gage - GO .1145 - NO-GO .1215 - M22520/6-002 | 2 | |
| G187 | Gage - GO .1475 - NO-GO .1545 - M22520/6-004 | 2 | |
| G188 | Gage - GO .1565 - NO-GO .1635 - M22520/6-005 | 2 | |
| G189 | Gage - GO .1935 - NO-GO .2005 - M22520/6-007 | 2 | |
| G190 | Gage - GO .2145 - NO-GO .2215 - M22520/6-009 | 2 | |
| G191 | Gage - GO .2275 - NO-GO .2345 - M22520/6-010 | 2 | |
| G192 | Gage - GO .2595 - NO-GO .2665 - M22520/6-012 | 2 | |
| G193 | Gage - GO .2645 - NO-GO .2715 - M22520/6-013 | 2 | |
| G194 | Gage - GO .2865 - NO-GO .2935 - M22520/6-014 | 2 | |
| G195 | Gage - GO .3055 - NO-GO .3125 - M22520/6-015 | 2 | |
| G196 | Gage - GO .3105 - NO-GO .3175 - M22520/6-016 | 2 | |
| G197 | Gage - GO .3205 - NO-GO .3275 - M22520/6-017 | 2 | |
| G198 | Gage - GO .3555 - NO-GO .3625 - M22520/6-019 | 2 | |
| G199 | Gage - GO .3805 - NO-GO .3875 - M22520/6-020 | 2 | |
| G200 | Gage - GO .3975 - NO-GO .4045 - M22520/6-021 | 2 | |
| G201 | Gage - GO .4275 - NO-GO .4345 - M22520/6-023 | 2 | |
| G202 | Gage - GO .4505 - NO-GO .4575 - M22520/6-024 | 2 | |
| G203 | Gage - GO .4715 - NO-GO .4785 - M22520/6-025 | 2 | |
| G204 | Gage - GO .4975 - NO-GO .5045 - M22520/6-026 | 2 | |
| G205 | Gage - GO .5285 - NO-GO .5355 - M22520/6-027 | 2 | |
| G206 | Gage - GO .1345 - NO-GO .1415 - M22520/6-028 | 2 | |
| G207 | Gage - GO .0875 - NO-GO .0945 - M22520/6-030 | 2 | |
| G208 | Gage - GO .0965 - NO-GO .1035 - M22520/6-031 | 2 | |
| G214 | Gage - GO .0160 - NO-GO .0210 | 2 | |
| G217 | Gage - GO .0260 - NO-GO .0310 | 2 | |
| G222 | Gage - GO .0360 - NO-GO .0410 | 2 | |
| G226 | Gage - GO .0590 - NO-GO .0640 | 2 | |
| G227 | Gage - GO .0680 - NO-GO .0730 | 2 | |
| G22705 | GAGE,PRESSURE,DIAL 0-60PSI | 1 | |
| G228 | Gage - GO .0160 - NO-GO .0210 | 2 | |
| G236 | Gage - GO .0410 - NO-GO .0460 | 2 | |
| G248 | Gage - GO .0140 - NO-GO .0160 | 2 | |
| G255 | Gage - GO .1025 - NO-GO .1065 | 2 | |
| G256 | Gage - GO .0640 - NO-GO .0670 - M22520/3-4 | 2 | |
| G258 | Gage - GO .0740 - NO-GO .0770 - M22520/3-6 | 2 | |
| G262 | Gage - GO .0960 - NO-GO .1040 - M22520/3-10 | 2 | |
| G263 | Gage - GO .0660 - NO-GO .0740 - M22520/3-11 | 2 | |
| G264 | Gage - GO .0640 - NO-GO .0720 - M22520/3-12 | 2 | |
| G289 | Gage - GO .3815 - NO-GO .3865 | 2 | |
| G292 | Gage - GO .0665 - NO-GO .0715 | 2 | |
| G315 | Gage - GO .0260 - NO-GO .0300 | 2 | |
| G32004-5 | GAGE EQPT - TRUNNION & DRAG LINK FITTING INSTL, NLG SPL-6909, SPL-6910 | 6 | |
| G32005-8 | GAGE - FITTING, INBD TRUNNION VERTICAL SUPPORT SPL-5168 | 6 | |
| G324 | Gage - GO .2535 - NO-GO .2605 | 2 | |
| G325 | Gage - GO .2165 - NO-GO .2235 | 2 | |
| G326 | Gage - GO .1665 - NO-GO .1735 | 2 | |
| G327 | Gage - GO .0510 - NO-GO .0570 for AMP 46447 | 2 | |
| G328 | Gage - GO .0590 - NO-GO .0650 for AMP 46447 | 2 | |
| G329 | DMC AMP46447 Gage | 3 | |
| G330 | Gage - GO .0860 - NO-GO .1000 | 2 | |
| G334 | Gage - GO .1000 - NO-GO .1060 | 2 | |
| G335 | Gage - GO .1540 - NO-GO .1620 | 2 | |
| G340 | Gage - GO .0590 - NO-GO .0650 | 2 | |
| G348 | Gage - GO .1175 - NO-GO .1265 | 2 | |
| G352 | Gage - GO .0860 - NO-GO .0940 | 2 | |
| G384 | Gage - GO .0655 - NO-GO .0705 | 2 | |
| G407 | Gage - GO .0670 - NO-GO .0770 | 2 | |
| G409 | Gage - GO .3760 - NO-GO.3840 | 2 | |
| G411 | Gage GO .025/.0420/.0620 - NO-GO .035/.0520/.0720 | 6 | |
| G418 | Gage - GO .0920 - NO-GO .0960 | 2 | |
| G424 | Gage - GO .0760 - NO-GO .0810 | 2 | |
| G434 | Gage - GO .0650 - NO-GO .0690 | 2 | |
| G436 | Gage - GO .0610 - NO-GO .0660 | 2 | |
| G443 | Gage - GO .1420 - NO-GO .1460 - M22520/3-15 | 2 | |
| G445 | Gage - GO .1560 - NO-GO .1600 | 2 | |
| G452 | Gage - GO .0680 - NO-GO .0730 | 2 | |
| G465 | Gage - GO .2160 - NO-GO .2200 | 2 | |
| G467 | Gage - GO .2580 - NO-GO .2620 | 2 | |
| G487 | Gage - GO .0440 - NO-GO .0460 | 2 | |
| G491 | Gage - GO .2765 - NO-GO .2835 | 2 | |
| G506 | Gage - GO .0360 - NO-GO .0410 | 2 | |
| G611 | Gage - GO .0600 - NO-GO .0660 | 2 | |
| G625 | Gage - GO .2160 - NO-GO .2220 | 2 | |
| G635 | Gage - GO .3415 - NO-GO .3465 | 2 | |
| G654 | Gage - GO .1690 - NO-GO .1750 | 2 | |
| G668 | Gage - GO .1680 - NO-GO .1740 | 2 | |
| G682 | Gage - GO .1660 - NO-GO .1740 | 2 | |
| G683 | Gage - GO .1980 - NO-GO .2060 | 2 | |
| G693 | Gage - GO .1300 - NO-GO .1360 | 2 | |
| G700 | Gage - GO .1645 - NO-GO .1715 | 2 | |
| G701 | Gage - GO .0440 - NO-GO .0510 - MS3196-20 | 2 | |
| G703 | Gage - GO .1530 - NO-GO .1560 | 2 | |
| G720 | Gage - GO .2078 - NO-GO .2120 -MS90486-8 | 2 | |
| G721 | Gage - GO .2378 - NO-GO .2420 - MS90486-6 | 2 | |
| G722 | Gage - GO .2968 - NO-GO .3010 - MS90486-4 | 2 | |
| G723 | Gage - GO .1678 - NO-GO .1720 - MS23003-8 | 2 | |
| G724 | Gage - GO .1998 - NO-GO .2040 -MS23003-6 | 2 | |
| G725 | Gage - GO .2518 - NO-GO .2560 - MS23003-4 | 2 | |
| G726 | Gage - GO .3368 - NO-GO .3410 - MS23003-1 | 2 | |
| G727 | Gage - GO .3678 - NO-GO .3720 -MS23003-01 | 2 | |
| G728 | Gage - GO .4018 - NO-GO .4060 - MS23003-02 | 2 | |
| G739 | Gage - GO .0460 - NO-GO .0520 | 2 | |
| G740 | Gage - GO .0540 - NO-GO .0600 | 2 | |
| G741 | Gage - GO .0760 - NO-GO .0820 | 2 | |
| G747 | Gage - GO .2610 - NO-GO .2690 | 9 | |
| G750 | Gage - GO .3660 - NO-GO .3740 | 2 | |
| G752 | Gage - GO .1110 - NO-GO .1270 - M81306/2-02F | 2 | |
| G756 | Gage - GO .2860 - NO-GO .2940 | 2 | |
| G759 | Gage - GO .2465 - NO-GO .2535 | 2 | |
| G769 | Gage - GO .0630 - NO-GO .0690 | 2 | |
| G772 | Gage - GO .1600 - NO-GO .1680 | 2 | |
| G786 | Gage - GO .1960 - NO-GO .2020 | 2 | |
| G789 | Gage - GO .1415 - NO-GO .1465 | 2 | |
| G801 | Gage - GO .3080 - NO-GO .3160 | 3 | |
| G809 | Gage - GO .0360 - NO-GO .0440 | 2 | |
| G813 | Gage - GO .1600 - NO-GO .1670 | 2 | |
| G818 | Gage - GO .0680 - NO-GO .0760 | 2 | |
| G821 | Gage - GO .1380 - NO-GO .1460 | 2 | |
| G827 | Gage - GO .1545 - NO-GO .1615 | 2 | |
| G828 | Gage - GO .4220 - NO-GO .4260 | 2 | |
| G833 | Gage - GO .3748 - NO-GO .3790 - MS90486-2 | 2 | |
| G834 | Gage - GO .4148 - NO-GO .4190 - MS90486-1 | 2 | |
| G835 | Gage - GO .4538 - NO-GO .4580 - MS90486-01 | 2 | |
| G836 | Gage - GO .4978 - NO-GO .5020 - MS90486-02 | 2 | |
| G837 | Gage - GO .5598 - NO-GO .5640 - MS90486-03 | 2 | |
| G838 | Gage - GO .6158 - NO-GO .6200 - MS90486-04 | 2 | |
| G854 | Gage - GO .3660 - NO-GO .3740 | 2 | |
| G856 | Gage - GO .0900 - NO-GO .0960 | 2 | |
| G867 | Gage - GO .2495 - NO-GO .2565 | 2 | |
| G879 | Gage - GO .0265 - NO-GO .0305 | 2 | |
| G887 | Gage - GO .0630 - NO-GO .0710 for DCT4-105 | 2 | |
| G919 | Gage - GO .0860 - NO-GO .0900 | 2 | |
| G925 | Gage - GO .0420 - NO-GO .0460 | 2 | |
| G930 | Gage - GO .2640 - NO-GO .2760 | 2 | |
| G931 | Gage GO 0.1260/0.0900/0.0760 - NO-GO 0.1380/0.1020/0.0880 | 2 | |
| G933 | Gage - GO .2065 - NO-GO .2135 | 2 | |
| G942 | Gage - GO .2565 - NO-GO .2635 | 2 | |
| G949 | Gage - GO .0670 - NO-GO .0730 | 2 | |
| G950 | Gage - GO .0400 - NO-GO .0600 | 2 | |
| G958 | Gage - GO .2260 - NO-GO .2280 | 2 | |
| G959 | Gage - GO .0360 - NO-GO .0400 | 2 | |
| G960 | Gage - GO .3540 - NO-GO .3620 | 2 | |
| G966 | Gage - GO .2580 - NO-GO .2680 | 2 | |
| G995 | Gage - GO .0655 - NO-GO .0725 | 2 | |
| GA47567-110-A | GAGE, PRESSURE, DIAL INDICATING NSN 6685-14-563-5048 | 1 | |
| GA75-241 | PRESSURE GAGE 0-60 PSIG (1) CL0.75 | 1 | |
| GAGE 0-160 PSI | PRESSURE GAGE 0-160 PSI | 1 | |
| GAGE PIN, 0.562 INCH DIAMETER | GAGE PIN, 0.562 INCH DIAMETER | 1 | |
| GLOB925297 | GAGE SET TELESCOPIC 5/16-6 | 1 | |
| GSE5100758 | PUSH-PULL FORCE GAGE, (0 - 50 POUNDS)-GSE5100761 & GSE5100758 | 1 | |
| GSE5100761 | PUSH-PULL FORCE GAGE, (0 - 50 POUNDS)-GSE5100761 & GSE5100758 | 1 | |
| GSE5120516 | PUSH-PULL GAGE 0-200 POUNDS-GSE5120516 | 1 | |
| H-2657 | GAGE, PRESS 0-60 PSI/BAR | 3 | |
| H2636 | GAGE - TIRE PRESSURE, 0-300 PSIG (0-2069 KPA), STD-1132 | 3 | |
| H681-6C | NOSE ASSEMBLY - ;GAGE BILT (BACB30VX6P04U) | 8 | |
| HC-1042 | GAGE,PRESSURE,DIAL INDICATING;|06-5004 | 4 | |
| HG177-3 | PIN PROTUSION GAGE 3/16"DIA | 1 | |
| HG77-14A | PIN/COLLAR GAGE (FOR PINS 0.190 IN DIAMETER AND COLLARS, NAS1080C06) | 1 | |
| HU24467 | GAGE - THREAD (0.5625 IN - 18 THD/IN) | 3 | |
| HU24468 | GAGE - THREAD (0.6250 IN - 18 THD/IN) | 3 | |
| IAE 1P16092 | IAE 1P16092 IGNITER IMMERSION GAGE | 14 | |
| IAE1J12356 | IAE 1J12356 SETTING GAGE | 1 | |
| IAE1P16186 | IAE 1P16186 GAGE BAR | 1 | |
| J25001-8-CMF | 13 GAGE HRS ASTM A569 | 1 | |
| J27081-1 | GAGE - GO/NO GO (J27081-6 ASSY INCLUDED IN J27081-1 RIGGING EQUIPMENT - OUTBOARD TRAILING EDGE FLAPS) USED ON 777-200LR, -300ER AND 777F AIRPLANES. | 7 | |
| LST12458 | DIAL BORE GAGE 2-6IN | 1 | |
| LST24483-0 | BORE GAGE HEAD .160-.200 | 1 | |
| LST50035 | NO.6 SCREW PITCH GAGE | 1 | |
| LST50677 | JOBBERS' DRILL GAGE 1/16-1/2" | 1 | |
| LST50678 | ENGLISHSTANDARDWIREGAGENOS1-36 | 1 | |
| LST51080 | STEELRULEDEPTHGAGE0-6"RANGE | 1 | |
| LST51296 | RADIUS GAGE 1/32IN 17 64IN | 1 | |
| LST51298 | RADIUS GAGE 9/32IN 33 64IN | 1 | |
| LST51316 | AMERICANSTANDARDWIREGAGE#0-36 | 1 | |
| LST51318 | USSTANDARDGAGE#0-36(.3125-.007 | 1 | |
| LST52610 | GAGE TELESCOPING 5/16 - 1/2 | 1 | |
| LST52615 | GAGE TELESCOPING 3 1/2 - 6 | 1 | |
| LST52718 | 644JZ DIAL DEPTH GAGE | 1 | |
| LST66876 | RADIUS GAGE SET S167CHZ W/SLC | 1 | |
| LST67482 | PIN GAGE SET .061-.250 | 1 | |
| LTCT14679 | 62. GAGE PLUG SPLINE | 1 | |
| M22520/3-10 | GAGE G262 FOR X511 | 1 | |
| M22520/3-13 | GAGE G265 FOR Y540 & X528 | 1 | |
| M22520/3-14 | GAGE G266 FOR Y540 & X528 | 1 | |
| M22520/3-3 | GAGE G145 FOR MH860 | 1 | |
| M22520/39-01 | GAGE GO .025/.0420/.0620 - NO-GO .035/.0520/.0720 | 1 | |
| M22520/6-002 | GAGE G186 FOR Y193 | 1 | |
| M22520/6-008 | GAGE G180 FOR Y197 Y205 Y680 | 1 | |
| M22520/6-022 | GAGE G165 FOR Y630P | 1 | |
| M22520/6-029 | GAGE G160 FOR Y679 Y205 | 1 | |
| M22520/6-031 | GAGE G208 FOR Y635 Y680 | 1 | |
| M85352/3-1 | GAGE ELEMENT (50 TO 600 PSI) | 1 | |
| MI5513-16 | INSERTION TOOL 16 GAGE DEUTSCH CONNECTOR. | 1 | |
| MI5515-16 | REMOVAL TOOL 16 GAGE CONTACTS ON DEUTSCH CONNECTOR. | 1 | |
| MODEL 6006 | TRACTOR - BAGGAGE/CARGO - 6,000 LB DRAW BAR PULL | 1 | |
| MT0000243 | BORE GAGE 100-160/0.01MM 511-714 | 1 | |
| MT0000246 | BORE GAGE 160-250/0.001MM 511-725 | 1 | |
| MTI516-126 | GAGE BLOCK_[MTI516-126] | 1 | |
| NRK-3AST | Gage Set NSN 5280-01-352-1336(KIT INCLUDES AL, ST, AND TI STDS) *DO NOT USE THIS PART NUMBER, OURS IS RSN-3AST | 1 | |
| PIN GAGE .011-.060 | .011 TO. 060 50PCS SPI PIN GAGE SETS | 1 | |
| PIN GAGE 0.61-.250 | .061 TO .250 190PC SPI PIN GAGE SETS | 1 | |
| PSDAF-113 | CABLE ASSY TEST SET FUEL GAGE UH60 (PSDA | 2 | |
| PWA 16469 | GAGE NO.6 BEARING SUPPORT RODS | 1 | |
| PWA101763 | GAGE SET_[PWA101763] | 1 | |
| PWA102391 | GAGE (REPLACES PWA 47926) | 1 | |
| PWA25917 | GAGE,CLASSIFICATION - LPT 6TH VANE_[PWA25917] | 1 | |
| PWA26004 | GAGE - MGB F/P BEVEL GEAR THICKNESS CHK_[PWA26004] | 1 | |
| PWA26005 | GAGE - MGB HYD G/SFT DISTANCE CHECK_[PWA26005] | 2 | |
| PWA26008 | GAGE - AGB BALL BEARING,AXIAL PLAY_[PWA26008] | 2 | |
| PWA26644 | GAGE, BLADE WEAR - HPC 5TH STAGE_[PWA26644] | 2 | |
| PWA26645E | GAGE - BLADE, HPC 6TH STAGE_[PWA26645E] | 1 | |
| PWA26646F | GAGE, BLADE WEAR - HPC 7TH STAGE_[PWA26646F] | 1 | |
| PWA26647 | GAGE, BLADE WEAR - HPC 8TH STAGE_[PWA26647] | 2 | |
| PWA26648 | GAGE - BLADE, HPC 9TH STAGE_[PWA26648] | 2 | |
| PWA26649 | GAGE, BLADE WEAR - HPC 10TH STG BLADE_[PWA26649] | 2 | |
| PWA26650 | GAGE - BLADE, HPC 11TH STAGE_[PWA26650] | 2 | |
| PWA26651H | GAGE, BLADE WEAR - HPC 12TH STAGE_[PWA26651H] | 1 | |
| PWA26652 | GAGE, BLADE WEAR - HPC 13TH STAGE_[PWA26652] | 2 | |
| PWA26683 | GAGE, BLADE WEAR - HPC 14TH STAGE_[PWA26683] | 2 | |
| PWA26684 | GAGE - BLADE WEAR, HPC 15TH STAGE_[PWA26684] | 2 | |
| PWA28223 | GAGE, NO GO - HPC 6TH STAGE CHORD WIDTH_[PWA28223] | 1 | |
| PWA28226 | GAGE, NO GO - HPC 9TH STAGE CHORD WIDTH_[PWA28226] | 1 | |
| PWA28242 | GAGE - DISK, HPC 6TH STG Z-PLANE DIA._[PWA28242] | 1 | |
| PWA28254 | GAGE, AXIAL DEFLECTION - LPT 6TH STG VAN_[PWA28254] | 1 | |
| PWA28462 | GAGE,POSITION - MGB CSD TRANSFER TUBE_[PWA28462] | 3 | |
| PWA28648 | GAGE_[PWA28648] | 1 | |
| PWA28666 | GAGE_[PWA28666] | 2 | |
| PWA28678 | INSPECTION GAGE - MASTER BLADE_[PWA28678] | 2 | |
| PWA28694 | GAGE - LOW TURBINE POSITION_[PWA28694] | 1 | |
| PWA28939 | GAGE, POSITIONING - 3.0 BLEED CONTROL_DIA.12.7X261.6MM/0.225KG_[PWA28939] | 2 | |
| PWA29156 | GAGE - FAN CASE RUB STRIP_127X102X102MM/0.45KG_[PWA29156] | 7 | |
| PWA29156-1 | GAGE - FAN CASE RUB STRIP_127X102X102MM/0.45KG_[PWA29156] | 1 | |
| PWA29679 | GAGE SET, AIRFOIL - LPT 4TH STG VANE_[PWA29679] | 1 | |
| PWA29681 | GAGE SET, AIRFOIL_[PWA29681] | 1 | |
| PWA32668 | GAGE_[PWA32668] | 1 | |
| PWA75028 | HYDRAULIC PRESS GAGE - HPC FRONT HUB_TO MEASURE PRESS_254 X 254 X 76 MM / 0.5 KG_[PWA75028] | 6 | |
| PWA75509 | GAGE IMMERSION - SPARK IGNITER_TO MEASURE DIST FR OUTER TO LINER_0.9 KG / 203 X 64 X 64 MM_[PWA75509] | 4 | |
| PWA75669 | GAGE - HUB LENGTH NO.2 BRG SEATING_[PWA75669] | 1 | |
| PWA75961 | GAGE-MID SPAN_[PWA75961] | 1 | |
| PWA76011 | WEAR GAGE_[PWA76011] | 2 | |
| PWA76012 | GAGE WEAR_[PWA76012] | 2 | |
| PWA76013 | WEAR GAGE_[PWA76013] | 2 | |
| PWA76332 | B GAGE BLADE_[PW76332] | 1 | |
| PWA76334 | C GAGE, BLADE_[PWA76334] | 1 | |
| PWA76336 | C GAGE, BLADE_[PWA76336] | 1 | |
| PWA76338 | B GAGE, BLADE_[PWA76338] | 1 | |
| PWA86141 | GAGE ( SB PW4ENG 72-227 REV1 )_203X76X25MM/0.5KG_[PWA86141] | 1 | |
| PWC34061 | GAGE, AXIAL POSITION CHECK PWC34061 | 6 | |
| PWC34161 | GAGE,AXIAL POSITION CHECK PWC34161 | 4 | |
| PWC72341 | GAGE CT BLADE GROWTH PT6A-140 | 1 | |
| RGS-300 | RADIUS GAGE SET 25 PIECES 1/64 TO 17/64'' | 1 | |
| RSE3502-314-CM | 20 GAGE A36 ANNEALED | 1 | |
| RSE3502-314-CMF | 20 GAGE A36 ANNEALED | 1 | |
| RSN-3AST | Gage Set NSN 5280-01-352-1336, Consist of 7075T6, 4340 & 6AL4V Standards | 1 | |
| S-4000-060 | PIN GAGE SET_(0.011 ~ 0.060) INCH_[S-4000-060] | 2 | |
| S167AZ | STARRETT® 16 Piece Radius Gage Set - USA MADE! | 1 | |
| S4003-250 | PIN GAGE SET 0.061 - 0.250 IN | 3 | |
| SB06-204D-27OS | GAGE BILT NOSE ASSY HUCK GUN OFFSET 3/16" | 2 | |
| SB06-751B-54RA | GAGE BILT NOSE ASSY HUCK GUN RIGHT ANGLE 3/16 | 2 | |
| SB06-752B20 | NOSE ASSEMBLY - ;GAGE BILT (BACB30VX6P04U) | 4 | |
| SB08-204D-27OS | GAGE BILT NOSE ASSY HUCK GUN OFFSET 1/46" | 1 | |
| SITRANS P | DIFFERENTIAL PRESSURE GAGE (2.4 TO 240 INH2O (0.0867 TO 8.67 PSIG (0.597 TO 59.78 KPA)), ACCURACY: ±1% OF FULL SCALE) SIEMENS, SITRANS P, SERIES DSIII, TRANSMITTER MODEL 7MF4432-1EA22-1AC7-7 | 1 | |
| SR16GSDA | SR16GSDA SWAGE GAGE | 3 | |
| ST-310 | LYCOMING™ ST-310 GAGE, FOR IO-360-N1A ENGINES | 3 | |
| ST1396J-H-6 | HAND GUN-DRIVEN GAGE 3/16" | 1 | |
| ST2220-2-4 | INSERTER - WIRE / CONTACTS (16 GAGE) (ASTRO TOOL CORPORATION) | 1 | |
| ST2220-3-14 | Removal - Wire / Contacts (16 Gage) | 1 | |
| ST8712P-B-9-0-1 | AD PROTRUSION GAGE, .562, BMIN | 1 | |
| ST8712P-P-9-0-1 | AD SLEEVE BOLT: PMAX PROTRUSION GAGE (0.562) | 1 | |
| ST8712PA-EK-9-0-T | EK PROTRUSION GAGE, .562 NON-RECESSED | 1 | |
| ST8712PA-EK-9-0-W | EK PROTRUSION GAGE, .562 RECESSED | 1 | |
| ST8712PC-9 | PROTRUSION GAGE, .562 SP1 AND SP2 | 1 | |
| ST8721P-P-9-0-1 | AD PROTRUCSION GAGE, .562, PMAX | 1 | |
| STARRETT 269B | STARRETT 269B TAPER GAGE ( 0.5” - 1 “ ) | 1 | |
| T-12740006A | MICO QUADRIGAGE W 6FT HOSE | 1 | |
| T-12740006HS | 6FT HOSE FOR MICO QUADRIGAGE | 1 | |
| TC-60 | TRACTOR - BAGGAGE TRACTOR - 6,000 LB DRAW BAR PULL - DUAL REAR WHEELS - GASOLINE ENGINE (DIESEL OR LPG ENGINE OPTIONAL) | 1 | |
| TH1A | TOOL - CRIMPING (16 GAGE CONTACT) | 13 | |
| UNK_214 | FORCE GAGE +-6 G (0.2) | 1 | |
| USGMODEL5080/5PSI | GAGE "USG" 47864 , USG Model 508 0/5psi | 1 | |
| VDS-6DC | DIGITAL DEPTH GAGE (GSE316) | 1 | |
| VDS-6DCX | 6 DIGITAL DEPTH GAGE MITUTOYO FOR | 2 | |
| W643JZ | ELECTRONIC DEPTH GAGE STA-62332 | 1 | |
| WA23-101DA | Die Assembly - Use G856 GO-NO-GO Gage | 2 | |
| WAVEBRT100-6 | PADDLE GAGE BUT REMOVAL 3/16 | 1 | |
| WCI-CBG-08-3-N | COMBINATION GAGE, 5/16" NOMINAL Ø.2830-.2860 , Ø.2870 | 2 | |
| WCI-FR-04-2-N-1590 | GAGE REAMER .1610/.1590 | 2 | |
| WCI-FR-04-2-N-1590-RA | RIGHT ANGLE GAGE FINISH REAMER (0.1580" - 0.1600") | 1 | |
| WCI-FR-04-4-N-1770-RA | RIGHT ANGLE GAGE FINISH REAMER (0.1760" - 0.1780") | 1 | |
| WCI-FR-06-0-N-1850-RA | RIGHT ANGLE GAGE FINISH REAMER (0.184" - 0.186") | 2 | |
| WCI-FR-06-2-N-2150-RA | RIGHT ANGLE GAGE FINISH REAMER (0.215" - 0.216") | 2 | |
| WCI-FR-08-0-N-2465-RA | RIGHT ANGLE GAGE FINISH REAMER. (0.246" - 0.248") | 2 | |
| WCI-FR-08-1-N-2620-RA | RIGHT ANGLE GAGE FINISH REAMER (0.261" - 0.263") | 2 | |
| WCI-FR-6-3-N-2495 | GAGE FINISH REAMER (6.337 MM) | 1 | |
| WCI-WGX-08-1 | MANDREL WEAR GAGE,FOR 17/64" NOMINAL HOLE SIZE | 1 | |
| WCI-WGX-10-1 | MANDREL WEAR GAGE,FOR 21/64" NOMINAL FASTENER SI | 1 | |
| Y550 | Die Set #8 - Uses G664 Gage | 3 | |
| Y631 | Die Set - M22520/5-105 - Use G668 & G190 Gage | 5 | |
| ZT345 | MICRO STOP GAGE 1/16D | 1 | |
| 60-3SPC | GAGE,COUNTERSINK,DIGITAL,60DEG ANGLE,.56 | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
