| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| WA23-11 | GAGE 4 | 5 | |
| WA23-12 | GAGE 4 | 3 | |
| WA23-138DA | GAGE 4 | 3 | |
| WA23-139L | GAGE 4 | 3 | |
| WA23-16 | GAGE 4 | 3 | |
| WA23-4 | GAGE 4 | 4 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 0-600 PSI | PRESSURE GAGE (0-40BAR) | 1 | |
| 06-042-D | STRUT GAGE( 06-042-D) | 1 | |
| 060176 | Sensor Gaged MTX 40z | 1 | |
| 063601 | Sensor Gaged for BMX40z | 1 | |
| 101-01501 | TESTER - FUEL GAGE SYSTEM (DFQ40K) | 5 | |
| 1082-00-20 | GAGE, HYDRAULIC PRESSURE: 0 TO 20 PSIG (138 KPAG) ,0 TO 100 PSIG (690 KPAG),0 TO 250 PSIG (1724 KPAG),0 TO 300 PSIG (2069 KPAG),0 TO 600 PSIG (4137 KPAG) AND 0 TO 5000 PSIG (34475 KPAG) | 1 | |
| 10C1400 | GAGE - NO 4 BEARING TO FWD ROTATING OIL SEAL | 1 | |
| 10C1400P01 | GAGE, NO. 4 BEARING TO FORWARD, ROTATING OIL SEAL, | 1 | |
| 14-6806-6011-A1 | DIGITAL PRESSURE GAGE W/ BOOT, RANGE 0-300 PSI WITH 4-DIGIT DISPLAY, ±0.5% ACCURACY, | 3 | |
| 14145 | SWITCHGAGE, FUEL (MURPHY) 24V | 2 | |
| 1440-2 | GAGES PART NUMBER: 1440-2, SUPPLIER CODE: K1012/01558 | 3 | |
| 155-903 | GAGE SET TELESCOPING - 5210004739350 | 3 | |
| 16A13228 | AIR PRESSURE GAGE ASSEMBLY (0-400 PSI) | 1 | |
| 17A1572G01 | GAGE, OVERSIZED SETSCREW STG 8-14 | 1 | |
| 17A1573G01 | GAGE, OVERSIZED SETSCREW STG 3-4 | 1 | |
| 190T05730-401 | 4 CAIXAS - JOINT GAGE, FLAP, SET | 4 | |
| 192-115 | HEIGHT GAGE .001-40 | 1 | |
| 19286-0370 | Imperium™ Cable Assembly Inspection Gage for Receptacle Harness Assembly Kits for 1/0 and 1 AWG cables, 171466 series. | 1 | |
| 200AO | GAGE PROTECTOR 1/4" NPT 5000PSI | 1 | |
| 206P4 | GAGE FINISH REAMER FTI TOOLS (46 DEGREES) | 1 | |
| 2141-202 | GAGE,DEPTH,DIGITAL DISPLAY;|DIGITAL D GAUGE;FOR TOOL STORE FOR SERVICE HELI BELL 206 / 429;WWW.INSIZE.COM; | 1 | |
| 21C6131G01 | GAGE 54-84 | 1 | |
| 23055A001 | PLUG GAGE (DIA 0.0440") | 1 | |
| 231843 | PPG Semco 231843 14 Gage 12 Dark Green Sem-Luer Needles | 1 | |
| 231844 | PPG Semco 231844 14 Gage 1 Dark Green Sem-Luer Needles | 2 | |
| 231845 | PPG Semco 231845 15 Gage 12 Orange Sem-Luer Needle | 1 | |
| 231846 | PPG Semco 231846 15 Gage 1 Orange Sem-Luer Needle | 1 | |
| 231849 | PPG Semco 231849 18 Gage 12 Pink Sem-Luer Needle | 1 | |
| 231854 | PPG Semco 231854 20 Gage 1 Yellow Sem-Luer Needle | 1 | |
| 231864 | PPG Semco 231864 25 Gage 1 Blue Sem-Luer Needle | 1 | |
| 232728 | PPG Semco 232728 14 Gage 1 Dark Green Sem-Flex Needle | 1 | |
| 232734 | PPG Semco 232734 18 Gage 2 Pink Sem-Flex Needle | 1 | |
| 232742 | PPG Semco 232742 23 Gage 1 Light Blue Sem-Flex Needle | 1 | |
| 232748 | PPG Semco 232748 28 Gage 1 Tan Sem-Flex Needle | 1 | |
| 232749 | PPG Semco 232749 30 Gage 12 Lavender Sem-Flex Needle | 1 | |
| 1177697 | HAND BRAKE CABLE (FOR TLD BAGGAGE TRACTOR, MODEL: JST-30 S/L: T58941, T58942, T58943) | 1 | |
| 2566824 | DEPTH GAGE (CAGE: 06848) | 1 | |
| 23068612 | Gage – Seal, HP & LP 3.428R | 1 | |
| 26-1613-24-000 | PRESSURE GAGE (0-4000 PSI) | 1 | |
| 2685742-G-4 | BOBBER GAGE (CAGE: 06848) | 1 | |
| 26MG-XT | DIGITAL ULTRASONIC THICKNESS GAGE (PANAMETRICS INC., 221 CRESCENT STREET, WALTHAM, MA 02154-2719, U.S.A.) | 1 | |
| 297292-1 | (NSN: 5220-01-687-5924), GAGE, RING, MASTER SETTING | 1 | |
| 2C14094G06 | GAGE FOR BRG 4B | 1 | |
| 2C18118 | FIXTURE, GAGE GO- STATIONARY AIR/OIL SEAL, NO 4 BRG | 1 | |
| 2C5702G01 | GAGE - STG 10 THRU 14 | 1 | |
| 2C6542 | (RT) GAGE,INSP-HPCR-STG 14-16 | 1 | |
| 2C6646G01 | GAGE BLOCK, COMP STATOR VANE STG 4 | 1 | |
| 2C6962G05 | GAGE, SIGHT BHGE 2C6962G05 FOR VSV ACTUATION ARMS USED IN WP 4028 00 SPECIAL TOOL FOR HIGH PRESSURE COMPRESSOR IGV AND VSV VISUAL INDPECTION | 8 | |
| 2C6963G04 | Gage Set, IGV, Stg.1-4 (80A3 / C2) | 2 | |
| 2C6966G07 | GAGE, SIGHT BHGE 2C6966G07 FOR VSV ACTUATION ARMS USED IN WP 4028 00 SPECIAL TOOL FOR HIGH PRESSURE COMPRESSOR IGV AND VSV VISUAL INDPECTION | 3 | |
| 2C7104 | GAGE SET,INSPECT-NO.4 BEARING | 1 | |
| 2C7104G01 | GAGE SET,INSPECT-NO.4 BEARING | 1 | |
| 2C8016 | GAGE, SIGHT - VARIABLE STATOR VANE STG 3, 4 & 5 | 2 | |
| 2C8016G03 | GAGE, SIGHT BHGE 2C8016G03 FOR VSV STAGE 5 ACTUATION ARMS USED IN WP 4028 00 SPECIAL TOOL FOR HIGH PRESSURE COMPRESSOR IGV AND VSV VISUAL INDPECTION | 2 | |
| 2C91326G01 | GAGE - CLEARANCE STG 104. 105, AND 159 | 1 | |
| 2GE22 | Gage,Coating,Ferrous/Non Ferrous,40 Mils | 1 | |
| 2M14167 | GAGE, INSP - LPT BLADE STG 4 | 1 | |
| 2R1121G04 | GAGE SET, TANG HANG - STAGE 4 | 1 | |
| 30-1084-S-02L-0/60 PSI ASHCROFT | 3" PRESSURE GAGE WITH CERTIFICATE 1/4NPT LOWER CONNECTOR | 1 | |
| 343-20-12SP | GAGE DRIVE 400 IN LB 3/8DR | 1 | |
| 3648-260 | HARDENED BASE EXTENSION 260 MM USED FOR 3753 SERIES ELECTRONIC DEPTH GAGES STARRETT PART NO: 3648-260 | 1 | |
| 3G3205G00231 | PIN, NOSE L/G CENTER LOCK DISENGAGE (GF-43-00) | 1 | |
| 442124-G-1 | GO-GAGE (CAGE: 06848) | 1 | |
| 456MAX-701-17 | Gage Bilt Straight Pulling Head for GBP704 Gun | 2 | |
| 456MAX-704-43OS | Gage Bilt Offset Pulling Head for GBP704 Gun | 4 | |
| 456MAX-704-54RA | Gage Bilt Right Angle Pulling Head for GB704 Gun | 2 | |
| 45MG-X-MT-E-EN | 45MG DIGITAL ULTRASONIC THICKNESS GAGE | 1 | |
| 482-009 | PRESSURE GAGE 0-4000 PSI | 1 | |
| 482-010 | LOW PRESSURE GAGE 0-400 PSI | 1 | |
| 482-086 | PRESS.GAGE,400 PSI,W/NIST CERT (MALABAR) | 1 | |
| 492037Z146105 | RE-ENGAGEMENT TOOL - BUSHING (856A3924G01) | 1 | |
| 4GP | PLUG, MS GAGE PORT, WITH O-RING 4GP | 1 | |
| 5/8-18-TRG-3A-SET | 5/8-18 UNJF 3A GO/NO GO RING GAGE SET. PD: .5889" / .5854" | 1 | |
| 50-590158-5 | FEELER GAGE (OR PWC 30364) | 1 | |
| 52-472-004 | GAGE HOLE .400-.50 | 1 | |
| 612406 | GAGE (FOR 11545) | 1 | |
| 620784-G | GAGE-FOR 620784 DIE | 1 | |
| 620964-G | GAGE-FOR 620964 DIE | 1 | |
| 621051 | GAGE (M22520/3-4) | 1 | |
| 621061 | GAGE (= TO M22520/3-14) | 1 | |
| 621069 | GAGE (MS90414-1)FOR: 11707-1 | 1 | |
| 621081 | GAGE-FOR M/2-01 USE SEL.#4 | 1 | |
| 630074-GC | GAGE, FOR .432" HEX | 1 | |
| 630129-GA | GAGE, FOR 630129 4.95MM | 1 | |
| 630147-1GA | GAGE, FOR 630147-2 | 1 | |
| 630147-2GB | GAGE, FOR 630147-2 | 1 | |
| 631027-GA | GAGE, FLAT, FOR .042 HEX | 1 | |
| 64AAB477R | Mitutoyo 64AAB477R MeasurLink 8 Gage R&R | 1 | |
| 64AAB478R | Mitutoyo 64AAB478R MeasurLink 8 Gage Management | 1 | |
| 65425-101 | MASTER GAGE/ADAPTER ASSEMBLY 65425-101 | 1 | |
| 660016 | GAGE (MS3197-24Y1) | 1 | |
| 660030 | GAGE-FOR M/7-01, USE SEL 4 | 1 | |
| 660039 | GAGE-FOR .415 HEX | 1 | |
| 6685P316SS | PRESSURE GAGE 4" DIAL | 1 | |
| 67809-101 | ENVELOPE GAGE, FORWARD DOOR D30664-() | 2 | |
| 6797161 | GAGE - 14TH STAGE COMP WHEEL PERMANENT | 1 | |
| 6799577 | GAGE KIT – P D DIAL BORE, INTERNAL SPLINE (WITH 4 SPLINE MASTERS & STORAGE CASE) | 1 | |
| 6C681-25 | NOSE ASSEMBLY - ;GAGE BILT (BACB30VX6P04U) | 1 | |
| 6T112X6 | LIFT-ALL 6" X 6 FT TYPE 1 ROUGHNECK WIRE MESH SLING - 12 GAGE - 4800 LBS WLL | 3 | |
| 704004 | Gage Bilt Powermax Riveter - Pulling Head Extension - 4" | 2 | |
| 744F | GAGE ASSEMBLY - PRESSURE TEST, FUEL - SPL-7344 | 1 | |
| 831412-1 | SPLINE WEAR INDICATION KIT (CONSISTS OF 831412-11/-13/-15/ -17/-19/-21 GAGES) | 1 | |
| 856A1206G06 | GAGE, RUNOUT - CDP SEAL (220V/50HZ) (RUNOUT GAGE) G04 | 9 | |
| 856A2664G01 | A320/A330/A340/GAGE, SETTING-VBV DOORS | 24 | |
| 856A3955 | GAGE BUCKLING CHECK LPT BLADES, STAGE 1 TO 4 | 1 | |
| 856A3955G01 | BUCKLING CHECKING GAGE - LPT BLADES STG 1/4 | 1 | |
| 856A3955G02 | BUCKLING CHECKING GAGE - LPT BLADES STG 1/4 | 2 | |
| 856A4622 | GAGE - CK DISTOR. STG4 AIR SEAL | 1 | |
| 856A4622G01 | GAGE - LPT OUTER STATIONARY AIR SEAL STG 4 | 1 | |
| 856A4638 | GAGE, BUCKLING CHECK - LPT BLADES 1-4 | 1 | |
| 856A4638G01 | BUCKLING CHECKING GAGE - LPT BLADES STG 1/4 | 1 | |
| 856A5522G01 | GAGE - NOTCH LPT BLADES STG1-4 | 4 | |
| 856A5522G02 | GAGE NOTCH BLADE TIP LPT STAGE 1-4 | 1 | |
| 856A5562G02 | BUCKLING INSPECTION GAGE - LPT BLADES STG1/4 | 3 | |
| 856A5590G01 | GAGE BOW CHECK LPT BLADES STAGES 1-4 | 1 | |
| 856A5909G02 | GAGE, BUCKLING CHECK - LPT BLADES, STAGE 1-4 (CHECK GAGE) NOT ESSENTIAL TO START | 1 | |
| 856A6710 | (RT) GAGE BUCKLING CHECK LPT BLADES. STAGES 1 TO 4 | 1 | |
| 856A6710G03 | GAGE SET, BUCKLING CHECK - LPT BLADES STAGES 1 THRU 4 | 1 | |
| 8844B | GAGE PRESS TIRES 0-400 | 6 | |
| 90-PG6002 | Bowers 90-PG6002 Gagemaker Internal Thread Roll Gauge 2 1/2" Reach Range 16 - 24" | 1 | |
| 90-RG7000 | Bowers 90-RG7000 Gagemaker External Thread Roll Gauge Range 5/8-4" | 1 | |
| 90-RG7001 | Bowers 90-RG7001 Gagemaker External Thread Roll Gauge Range 4-8" | 1 | |
| 90-RG7004 | Bowers 90-RG7004 Gagemaker External Thread Roll Gauge Range 16-20" | 1 | |
| 90-RG7005 | Bowers 90-RG7005 Gagemaker External Thread Roll Gauge Range 20-24" | 1 | |
| 90-TP-4-2-38 | Bowers Profile Gage 4" API Full Hole | 1 | |
| 90-TP-5-3-40 | Bowers Profile Gage 2 3/8" - 4 1/2" API REG | 1 | |
| 90-TRA-14P | Bowers 90-TRA-14P Gagemaker Thread Roll ACME 14 Pitch (Set of 2) | 1 | |
| 90-TRA-4P | Bowers 90-TRA-4P Gagemaker Thread Roll ACME 4 Pitch (Set of 2) | 1 | |
| 90-TRB74510P | Bowers 90-TRB74510P Gagemaker Thread Rolls 10mm Pitch | 1 | |
| 90-TRB74512P | Bowers 90-TRB74512P Gagemaker Thread Rolls 12mm Pitch | 1 | |
| 90-TRB74516P | Bowers 90-TRB74516P Gagemaker Thread Rolls 16mm Pitch | 1 | |
| 90-TRB7452P | Bowers 90-TRB7452P Gagemaker Thread Rolls 2mm Pitch | 1 | |
| 90-TRB74535P | Bowers 90-TRB74535P Gagemaker Thread Rolls 3.5mm Pitch | 1 | |
| 90-TRB7454P | Bowers 90-TRB7454P Gagemaker Thread Rolls 4mm Pitch | 1 | |
| 90-TRB7456P | Bowers 90-TRB7456P Gagemaker Thread Rolls 6mm Pitch | 1 | |
| 90-TRB7458P | Bowers 90-TRB7458P Gagemaker Thread Rolls 8mm Pitch | 1 | |
| 90-TRME-4P | Bowers 90-TRME-4P Gagemaker Thread Roll External Metric 4mm Pitch | 1 | |
| 90-TRMI-4P | Bowers 90-TRMI-4P Gagemaker Thread Roll Internal Metric 4mm Pitch | 1 | |
| 90-TRSA-14P | Bowers 90-TRSA-14P Gagemaker Thread Roll Stub ACME 14 Pitch | 1 | |
| 90-TRSA-4P | Bowers 90-TRSA-4P Gagemaker Thread Roll Stub ACME 4 Pitch | 1 | |
| 90-TRVE-4P | Bowers 90-TRVE-4P Gagemaker Thread Roll External 4 Pitch | 1 | |
| 98F27508206000 | GAGE END STOP ACTUATOR FLAP - A330/A340 | 17 | |
| 98F27508206210 | GO-NOGO GAGE TRACK1,4 +5 | 1 | |
| 98F27808205002 | CENTER-GAGE-SLAT, TR.16 (A340-500/600) | 1 | |
| 98F27808205003 | CHECK-GAGE-SLAT, TR. 16 (A340-500/600) | 1 | |
| A1290-4G | GAGE (FOR A1290-4, AP1290-4) | 1 | |
| A1290-SP4G | GAGE (AP1290-SP4) OBSOLETE | 1 | |
| A27062-12 | GAGE ASSEMBLY (4 IT) & (EQ A27062-1A) | 1 | |
| A422-G | GAGE FOR A422 | 1 | |
| AEM1610 | 14PC BLD VLV LSH GAGE SET | 1 | |
| AEM210423008 | STEP GAGE .004-.008/1/2X3/1/2L | 1 | |
| AGM06004 | GAGE (EQUIVALENT TO M22520/6-004) | 1 | |
| AGM06014 | GAGE (EQUIVALENT TO M22520/6-014) | 1 | |
| AMT23004DA | DIE ASSEMBLY (M22520/23-04) 4 GAGE | 1 | |
| AMT23007DA | DIE ASSEMBLY (M22520/23-07) 4/0 GAGE | 1 | |
| AMT23011L | LOCATOR (M22520/23-11) 4 GAGE | 1 | |
| AMT23122L | LOCATOR, 4 GAGE | 1 | |
| AMT23138DA | DIE ASSEMBLY, 4 GAGE | 1 | |
| AMT23139L | LOCATOR, 4 GAGE | 1 | |
| AMT23156L | LOCATOR, 4 GAGE | 1 | |
| AMT23157DA | DIE ASSEMBLY, 4 GAGE | 1 | |
| AMT23163L | LOCATOR, 4 GAGE | 1 | |
| AMT23166L | LOCATOR, 4-6 GAGE | 1 | |
| AMT23182L | LOCATOR, 4 GAGE | 1 | |
| AMT23245L | LOCATOR, 4 THROUGH 8 GAGE | 1 | |
| AMT23262L | LOCATOR, 4 GAGE | 1 | |
| AMT23298L | LOCATOR, 4-6 GAGE | 1 | |
| AMTG2304 | GAGE-FOR M22520/23-04 | 1 | |
| AMTG23140 | GAGE-FOR AMT23140DA | 1 | |
| AMTG23184 | GAGE-FOR AMT23184DA | 1 | |
| AMTG23264 | GAGE-FOR AMT23264DA | 1 | |
| AMTG4301 | Gage Go/No-Go Size 22-16 - M22520/43-01 | 2 | |
| AMTG4302 | Gage Go/No-Go Size 16-14 - M22520/43-02 | 2 | |
| AMTG4303 | Gage Go/No-Go Size 22-16 - M22520/43-03 | 2 | |
| AMTG4304 | Gage Go/No-Go Size 16-14 - M22520/43-04 | 2 | |
| ASHCROFT 0-100 | ASHCROFT 0-100 PSI GAGE TO 2C14711G01 | 1 | |
| ATC 2426 | PLIER, REMOVAL, 4 GAGE | 1 | |
| BAR 0-6 | GAGE 0-6 TO 2C14711G01 | 1 | |
| BAT-HGS4 | 4 Piece Small Hole Ball Gage Set | 1 | |
| CAL-36/4 | CAL-36/4-UNK (TORQUIMETER NOTCH GAGE) | 4 | |
| CAR-40-1-.2495-CBD | GAGE FINISH REAMERS, REF: FTI, P/N: CAR-40-1-.2495 | 1 | |
| CBFG-40-.2495/.2505 | FINAL HOLE GAGES, REF: FTI, P/N: CBFG-40-.2495/.25 | 1 | |
| CBG-14-0-N-1 | Combination Gage 14-0-N | 1 | |
| CBG-14-3-N-1 | Combination Gage 14-3-N | 3 | |
| CBG-4-2-N-1 | GAGE, COMBINATION (SET 4-2-N) | 1 | |
| CBG-8-2-N-1 | COMBINATION GAGE 2DO OVZ 1/4 | 2 | |
| CBMG-12-3-N | MANDREL GAGE CBMG-12-3-N (0.4014INCH) | 3 | |
| CBMG-14-0-N | MANDREL GAGE 14-0-N | 1 | |
| CBMG-14-3-N | MANDREL GAGE 14-3-N | 3 | |
| CBMG-4-4-N | GAGE, MANDREL CHECK(0,1648) | 3 | |
| CBMG-6-0-N | GAGE, MANDREL CHECK (0.1734) | 3 | |
| CBMG-6-2-N | GAGE, MANDREL CHECK (0.2064) | 4 | |
| CBMG-6-3-N | GAGE, MANDREL CHECK (0.2224) | 3 | |
| CBMG-8-0-N | GAGE, MANDREL CHECK (0.2294) | 5 | |
| CBMG-8-1-N | GAGE, MANDREL CHECK (0.2454) | 6 | |
| CBMG4-4N | GAGE, MANDREL CHECK (0.1648) | 3 | |
| CBMG8-1N | GAGE, MANDREL CHECK (0.24) | 6 | |
| CBR-14-0-N-1-**** | GAGE FINISH REAMER (KIT STDN 14-0-N) | 1 | |
| CBR-14-0-N-1-.4520 | REAMER, GAGE FINISH 14-0-N | 1 | |
| CBR-4-4-N-1-1875 | GAGE FINISH REAMER (ORIGINAL PN:CBR-4-4-N-1-.1875) | 1 | |
| CBR-6-0-N-RA-.1850 | RIGHT ANGLE GAGE FINISH REAMER (0.184" - 0.186") | 2 | |
| CBR-6-2-N-1 | GAGE REAMER .2319/.2294 | 1 | |
| CBR-6-3-N-1 | GAGE REAMER .2319/.2294 | 1 | |
| CBR-8-0-N-1 | GAGE REAMER .2480/.2450 | 1 | |
| CBR-8-0-N-RA-.2465 | RIGHT ANGLE GAGE FINISH REAMER. (0.246" - 0.248") | 1 | |
| CGF-4X-3B | KATO TANGLESS GAGE WORKING 3B SIZE 1/4-28 REF. CGF-4X-3B | 1 | |
| CGF-5X-3B | KATO TANGLESS GAGE WORKING 3B SIZE 5/16-24 REF. CGF-5X-3B | 1 | |
| CGF-6X-3B | KATO TANGLESS GAGE WORKING 3B SIZE 3/8 -24 REF. CGF-6X-3B | 1 | |
| CNT6553 | 4 PC TELESCOPING GAGE | 1 | |
| CODENO.514-105 | HS-18 (HS45) HEIGHTGAGE "Mitutoyo" | 1 | |
| CT-494 | GAGE (GROUND SHELL INSIDE DIAMETER AND SEMICONDUCTOR DEPTH)-CHAMPION CT-494 | 3 | |
| CT494 | CHAMPION CT-494 GAGE (GROUND SHELL INSIDE DIAMETER AND SEMICONDUCTOR DEPTH) | 3 | |
| D12-9892-04 | INSPECTION GAGE 04 | 5 | |
| D12-9892-24 | INSPECTION GAGE 24 | 1 | |
| DAT08AECG5004 | INSPECTION GAGES -04 | 1 | |
| DAT08AEMT5004 | MARKING GAGES -04 | 1 | |
| DFS2-250G | GAGE - GRAM, APPROX. 40 - 350 GRAM FORCE CAPACITY, /- 0.1% | 2 | |
| DIN-7280 | 124127999 WET FILM GAGE | 1 | |
| DM012 | DIAL DEPTH GAGE 643 | 1 | |
| DPPH-100 | GAGE - DIAL PUSH/PULL, 0-100 LBS (GDC10114) | 2 | |
| DS 150K1 | GAGE - FORCE, WITH RESOLUTION OF 0.15-LB OR BETTER, COM-4907 | 1 | |
| E1440 | DIAL GAGE 2.5" 0-160 PSI CENTRAL CONNECTION 1/4NPT | 1 | |
| EUS309-G | GAGE, ROUND, FOR EUS309 SEL #4 | 1 | |
| EXT023 | GO NO GO GAGE BRAKE ATR 42-500 | 1 | |
| F28276000 | ADJUSTMENT TOOL WITH SETTING SHIMS (GS48354 GS48363) AND GAGE T47948 | 1 | |
| F70284-1 | GAGE SET-GROUND POWER_1.8KG/330X179X102MM_[F70284-1] | 28 | |
| F72977-62 | BRAKE PRESSURE GAGE SET (0 TO 4000 PSI) | 16 | |
| F80179-6-CM | 14 GAGE 304 SERIES SS | 1 | |
| F80198-14 | PLUG GAGE - NOSE LANDING GEAR NUT (F80198-18 IS INCLUDED IN THE KITF80198-14) | 12 | |
| FB322 | FEELER GAGE (0.004" A 0.027") | 2 | |
| FBL4 | FEELER GAGE_0.005(4), 0.008(4), 0.010(4), 0.015(4)_[FBL4] | 1 | |
| FFL72646400 | 1.4IN-6IN DIAL BORE GAGE | 1 | |
| FTE-03-35-34000 | RUDDER SETTING GAGE STA.3333.4 | 1 | |
| FTMG-483-A-0 | GAGE, MANDREL CHECK (0.2471) | 1 | |
| G1001 | Gage - GO .0360 - NO-GO .0410 for M309 | 2 | |
| G1002 | Gage - GO .0450 - NO-GO .0500 for M309 | 2 | |
| G1005 | Gage - GO .0690 - NO-GO .0740 for M309 | 2 | |
| G1016 | Gage - GO .1490 - NO-GO .1530 | 2 | |
| G1045 | Gage - GO .0340 - NO-GO .0390 | 2 | |
| G1122 | Gage GO .0360 - NO-GO .0410 | 2 | |
| G1150 | GAGE GO.1110 - NO-GO.1190- Use w/ HD51-114N & -118N | 2 | |
| G1153 | GAGE- GO.1860 - NO-GO.1940- Use w/ HD51-117N & -121N | 2 | |
| G1155 | Gage - GO .3160 - NO-GO .3240 - Use w/ HD51-124N & -125N | 2 | |
| G125 | GAGE GO.0390 NO-GO.044 | 10 | |
| G1261 | Gage GO .1490 - NO-GO .1530 | 2 | |
| G1262 | Gage GO .0340 - NO-GO .0390 | 2 | |
| G1263 | Gage GO 0.042 - NO-GO 0.058 | 2 | |
| G140 | Gage - GO .1420 - NO-GO .1460 | 2 | |
| G145 | Gage - GO .0410 - NO-GO.0460 - M22520/3-3 | 2 | |
| G1459 | GAGE GO .1450 NO GO .1490 | 1 | |
| G155 | Gage - GO .1245 - NO-GO .1315 - M22520/6-003 | 2 | |
| G160 | Gage - GO .0645 - NO-GO .0715 - M22520/6-029 | 2 | |
| G165 | Gage - GO .4255 - NO-GO.4325 - M22520/6-022 | 2 | |
| G175 | Gage - GO .3395 - NO-GO .3465 - M22520/6-018 | 2 | |
| G185 | Gage - GO .1745 - NO-GO .1815 - M22520/6-006 | 2 | |
| G186 | Gage - GO .1145 - NO-GO .1215 - M22520/6-002 | 2 | |
| G187 | Gage - GO .1475 - NO-GO .1545 - M22520/6-004 | 2 | |
| G190 | Gage - GO .2145 - NO-GO .2215 - M22520/6-009 | 2 | |
| G191 | Gage - GO .2275 - NO-GO .2345 - M22520/6-010 | 2 | |
| G193 | Gage - GO .2645 - NO-GO .2715 - M22520/6-013 | 2 | |
| G194 | Gage - GO .2865 - NO-GO .2935 - M22520/6-014 | 2 | |
| G200 | Gage - GO .3975 - NO-GO .4045 - M22520/6-021 | 2 | |
| G201 | Gage - GO .4275 - NO-GO .4345 - M22520/6-023 | 2 | |
| G202 | Gage - GO .4505 - NO-GO .4575 - M22520/6-024 | 2 | |
| G203 | Gage - GO .4715 - NO-GO .4785 - M22520/6-025 | 2 | |
| G204 | Gage - GO .4975 - NO-GO .5045 - M22520/6-026 | 2 | |
| G206 | Gage - GO .1345 - NO-GO .1415 - M22520/6-028 | 2 | |
| G207 | Gage - GO .0875 - NO-GO .0945 - M22520/6-030 | 2 | |
| G215 | Gage - GO .0190 - NO-GO .0240 | 2 | |
| G219 | Gage - GO .0340 - NO-GO .0390 | 2 | |
| G222 | Gage - GO .0360 - NO-GO .0410 | 2 | |
| G223 | Gage - GO .0390 - NO-GO .0440 | 2 | |
| G224 | Gage - GO .0450 - NO-GO .0500 | 2 | |
| G226 | Gage - GO .0590 - NO-GO .0640 | 2 | |
| G229 | Gage - GO .0190 - NO-GO .0240 | 2 | |
| G232 | Gage - GO .0290 - NO-GO .0340 | 2 | |
| G234 | Gage - GO .0370 - NO-GO .0420 | 2 | |
| G236 | Gage - GO .0410 - NO-GO .0460 | 2 | |
| G248 | Gage - GO .0140 - NO-GO .0160 | 2 | |
| G254 | Gage - GO .0400 - NO-GO .0420 | 2 | |
| G256 | Gage - GO .0640 - NO-GO .0670 - M22520/3-4 | 2 | |
| G258 | Gage - GO .0740 - NO-GO .0770 - M22520/3-6 | 2 | |
| G259 | Gage - GO .1480 - NO-GO .1510 - M22520/3-7 | 2 | |
| G260 | Gage - GO .1210 - NO-GO .1240 - M22520/3-8 | 2 | |
| G261 | Gage - GO .1320 - NO-GO .1400 - M22520/3-9 | 2 | |
| G262 | Gage - GO .0960 - NO-GO .1040 - M22520/3-10 | 2 | |
| G263 | Gage - GO .0660 - NO-GO .0740 - M22520/3-11 | 2 | |
| G264 | Gage - GO .0640 - NO-GO .0720 - M22520/3-12 | 2 | |
| G265 | Gage - GO .0430 - NO-GO .0510 - M22520/3-13 | 2 | |
| G266 | Gage - GO .0250 - NO-GO .0330 - M22520/3-14 | 2 | |
| G268 | Gage - GO .0240 - NO-GO .0290 | 2 | |
| G280 | Gage - GO .0455 - NO-GO .0485 | 2 | |
| G281 | Gage - GO .3098 - NO-GO .3140 - MS23003-2 | 2 | |
| G282 | Gage - GO .4358 - NO-GO .4400 - MS23003-03 | 2 | |
| G287 | Gage - GO .1245 - NO-GO .1315 | 2 | |
| G32004-5 | GAGE EQPT - TRUNNION & DRAG LINK FITTING INSTL, NLG (G32004-6 INCLUDED IN G32004-5 KIT) | 6 | |
| G327 | Gage - GO .0510 - NO-GO .0570 for AMP 46447 | 2 | |
| G328 | Gage - GO .0590 - NO-GO .0650 for AMP 46447 | 2 | |
| G329 | DMC AMP46447 Gage | 3 | |
| G333 | Gage - GO .1900 - NO-GO .2040 | 2 | |
| G335 | Gage - GO .1540 - NO-GO .1620 | 2 | |
| G344 | Gage - GO .0490 - NO-GO .0540 | 2 | |
| G347 | Gage - GO .1415 - NO-GO .1505 | 2 | |
| G351 | Gage - GO .0410 - NO-GO .0490 | 2 | |
| G352 | Gage - GO .0860 - NO-GO .0940 | 2 | |
| G354 | Gage - GO .1470 - NO-GO .1550 | 2 | |
| G359 | Gage - GO .1485 - NO-GO .1535 | 2 | |
| G398 | Gage - GO .0490 - NO-GO .0550 | 2 | |
| G40 | Gage - GO .0440 - NO-GO .0510 | 2 | |
| G403 | Gage - GO .0330 - NO-GO .0410 | 2 | |
| G4039L | GAGE, 4 INCH GLYCERINE FILLED | 1 | |
| G409 | Gage - GO .3760 - NO-GO.3840 | 2 | |
| G40D-06-P10 | GAGE (DIAMETER IS 40MM 0-150 PSI 0 -1 MPA CONNECTOR G1/8) | 1 | |
| G410 | Gage - GO .4090 - NO-GO .4170 | 3 | |
| G411 | Gage GO .025/.0420/.0620 - NO-GO .035/.0520/.0720 | 6 | |
| G430 | Gage - GO .1040 - NO-GO .1080 | 2 | |
| G432 | Gage - GO .2720 - NO-GO .2840 | 2 | |
| G433 | Gage - GO .2400 - NO-GO .2520 | 2 | |
| G443 | Gage - GO .1420 - NO-GO .1460 - M22520/3-15 | 2 | |
| G446 | Gage - GO .1540 - NO-GO .1580 | 2 | |
| G460 | Gage - GO .0445 - NO-GO .0495 | 2 | |
| G468 | Gage - GO .2045 - NO-GO .2115 | 2 | |
| G470 | Gage - GO .0395 - NO-GO .0445 | 2 | |
| G486 | Gage - GO .4125 - NO-GO .4175 | 2 | |
| G487 | Gage - GO .0440 - NO-GO .0460 | 2 | |
| G493 | Gage - GO .1445 - NO-GO .1495 | 2 | |
| G506 | Gage - GO .0360 - NO-GO .0410 | 2 | |
| G513 | Gage - GO .0190 - NO-GO .0240 | 2 | |
| G538 | Gage - GO .0470 - NO-GO .0520 | 2 | |
| G598 | Gage - GO .0200 - NO-GO .0240 | 2 | |
| G615 | Gage - GO .0845 - NO-GO .0915 | 2 | |
| G616 | Gage - GO .1375 - NO-GO .1425 | 2 | |
| G628 | Gage - GO .0105 - NO-GO .0145 | 2 | |
| G635 | Gage - GO .3415 - NO-GO .3465 | 2 | |
| G649 | Gage - GO .4125 - NO-GO .4175 | 2 | |
| G651 | Gage - GO .0380 - NO-GO .0400 | 2 | |
| G664 | Gage - GO .1470 - NO-GO .1550 | 2 | |
| G668 | Gage - GO .1680 - NO-GO .1740 | 2 | |
| G669 | Gage - GO .2370 - NO-GO .2430 | 2 | |
| G682 | Gage - GO .1660 - NO-GO .1740 | 2 | |
| G686 | Gage - GO .1450 - NO-GO .1490 | 2 | |
| G698 | Gage - GO .4250 - NO-GO .4320 | 2 | |
| G700 | Gage - GO .1645 - NO-GO .1715 | 2 | |
| G700-523103-1 | Internal Baggage Door Lock (Pre Sb700-52-034/Sb700-1A11-52-011) | 2 | |
| G700-523103-15 | Internal Baggage Door Lock (Post Sb700-52-034/Sb700-1A11-52-011) | 2 | |
| G701 | Gage - GO .0440 - NO-GO .0510 - MS3196-20 | 2 | |
| G720 | Gage - GO .2078 - NO-GO .2120 -MS90486-8 | 2 | |
| G721 | Gage - GO .2378 - NO-GO .2420 - MS90486-6 | 2 | |
| G722 | Gage - GO .2968 - NO-GO .3010 - MS90486-4 | 2 | |
| G724 | Gage - GO .1998 - NO-GO .2040 -MS23003-6 | 2 | |
| G725 | Gage - GO .2518 - NO-GO .2560 - MS23003-4 | 2 | |
| G726 | Gage - GO .3368 - NO-GO .3410 - MS23003-1 | 2 | |
| G728 | Gage - GO .4018 - NO-GO .4060 - MS23003-02 | 2 | |
| G729 | Gage - GO .4708 - NO-GO .4750 - MS23003-04 | 2 | |
| G732 | Gage - GO .0800 - NO-GO .0840 | 2 | |
| G739 | Gage - GO .0460 - NO-GO .0520 | 2 | |
| G740 | Gage - GO .0540 - NO-GO .0600 | 2 | |
| G750 | Gage - GO .3660 - NO-GO .3740 | 2 | |
| G756 | Gage - GO .2860 - NO-GO .2940 | 2 | |
| G759 | Gage - GO .2465 - NO-GO .2535 | 2 | |
| G771 | Gage - GO .1180 - NO-GO .1240 | 2 | |
| G789 | Gage - GO .1415 - NO-GO .1465 | 2 | |
| G790 | Gage - GO .5495 - NO-GO .5545 | 2 | |
| G791 | Gage - GO .2395 - NO-GO .2445 | 2 | |
| G792 | Gage - GO .1920 - NO-GO .1940 | 2 | |
| G80 | Gage - GO .0410 - NO-GO .0445 | 2 | |
| G805 | Gage - GO .0740 - NO-GO .0800 | 2 | |
| G808 | Gage - GO .1455 - NO-GO .1525 | 2 | |
| G809 | Gage - GO .0360 - NO-GO .0440 | 2 | |
| G811 | Gage - GO .0310 - NO-GO .0340 | 2 | |
| G821 | Gage - GO .1380 - NO-GO .1460 | 2 | |
| G827 | Gage - GO .1545 - NO-GO .1615 | 2 | |
| G828 | Gage - GO .4220 - NO-GO .4260 | 2 | |
| G833 | Gage - GO .3748 - NO-GO .3790 - MS90486-2 | 2 | |
| G834 | Gage - GO .4148 - NO-GO .4190 - MS90486-1 | 2 | |
| G835 | Gage - GO .4538 - NO-GO .4580 - MS90486-01 | 2 | |
| G836 | Gage - GO .4978 - NO-GO .5020 - MS90486-02 | 2 | |
| G837 | Gage - GO .5598 - NO-GO .5640 - MS90486-03 | 2 | |
| G838 | Gage - GO .6158 - NO-GO .6200 - MS90486-04 | 2 | |
| G854 | Gage - GO .3660 - NO-GO .3740 | 2 | |
| G855 | Gage - GO .4000 - NO-GO .4080 | 2 | |
| G867 | Gage - GO .2495 - NO-GO .2565 | 2 | |
| G871 | Gage - GO .0240 - NO-GO .0270 | 2 | |
| G872 | Gage - GO .2370 - NO-GO .2410 | 2 | |
| G873 | Gage - GO .1390 - NO-GO .1430 | 2 | |
| G874 | Gage - GO .0425 - NO-GO .0445 | 2 | |
| G875 | Gage - GO .0475 - NO-GO .0545 | 2 | |
| G884 | Gage - GO .1430 - NO-GO .1470 | 2 | |
| G885 | Gage - GO .1000 - NO-GO .1080 for DCT4-105 | 2 | |
| G886 | Gage - GO .0740 - NO-GO .0820 for DCT4-105 | 2 | |
| G887 | Gage - GO .0630 - NO-GO .0710 for DCT4-105 | 2 | |
| G90 | Gage - GO .0385 - NO-GO .0435 | 2 | |
| G917 | Gage - GO .1240 - NO-GO .1280 | 2 | |
| G925 | Gage - GO .0420 - NO-GO .0460 | 2 | |
| G929 | Gage - GO .2320 - NO-GO .2440 | 2 | |
| G930 | Gage - GO .2640 - NO-GO .2760 | 2 | |
| G950 | Gage - GO .0400 - NO-GO .0600 | 2 | |
| G959 | Gage - GO .0360 - NO-GO .0400 | 2 | |
| G960 | Gage - GO .3540 - NO-GO .3620 | 2 | |
| G984 | GAGE G984 FOR Y888 | 2 | |
| G987 | Gage - GO .0120 - NO-GO .0140 | 2 | |
| GA47567-110-A | GAGE, PRESSURE, DIAL INDICATING NSN 6685-14-563-5048 | 1 | |
| GAUGE 0-4000 PSI | PRESSURE GAGE 0-4000 PSI | 2 | |
| GB751204 | 751204, GAGE BILT TOOL PART, ADAPTER ASSEMBLY | 2 | |
| GB752 | Gage Bilt Blind Riveter (Installs CherryMAX up to 1/4" Diameter!) | 3 | |
| GD-30 | GAGE - GRAM, 40-350 GRAM FORCE, /-0.1% ACCURACY | 2 | |
| GGG-G-17 | GAGE SET,TELESCOPIN NSN: 5210004739350 | 1 | |
| GSB3210002 | GAGE-GO - NO GO TEST (PROXIMITY SENSOR ELDEC 8SC04) | 1 | |
| H-2657 | GAGE, PRESSURE, 0-60 PSI (0-4BAR) | 3 | |
| H681-6C | NOSE ASSEMBLY - ;GAGE BILT (BACB30VX6P04U) | 8 | |
| HC-1042 | GAGE,PRESSURE,DIAL INDICATING;|06-5004 | 4 | |
| HC-2144 | GAGE,DIFFERENTIAL,DIAL INDICATING;|SYSTEM PRESSURE GAUGE;HYDRULIC POWER UNIT (MODEL 5241) FOR TESTING HELLI 429 | 5 | |
| HDE23C | Battery Powered Large Gage 4 Indent Crimp Tool | 2 | |
| HG177-4 | PIN PROTUSION GAGE 1/4"DIA | 1 | |
| HG177-5 | PIN PROTUSION GAGE 1/4"DIA | 1 | |
| HU24463 | GAGE - THREAD (0.3125 IN - 24 THD/IN) | 3 | |
| HU24464 | GAGE - THREAD (0.3750 IN - 24 THD/IN) | 3 | |
| HU24465 | GAGE - THREAD (0.4375 IN - 20 THD/IN) | 3 | |
| IAE 2F10418 | IAE 2F10418 LENGTH GAGE | 1 | |
| IAE1M14114 | IAE 1M14114 SIZING GAGE | 1 | |
| IAE2J13314 | EROSION MEASURING GAGE (0-240MM) | 1 | |
| ISO CUP | VISCOSITY GAGE #4 | 1 | |
| ISOCUP4 | VISCOSITY GAGE #4 | 1 | |
| J4M001 | 145 BAGGAGE BAY DOOR TENSION TOOL | 1 | |
| J52041-1 | GAGE - GO/NO-GO_[J52041-1] | 5 | |
| LBS586 | HEIGHT GAGE 0 - 14 | 1 | |
| LEO1 | GAGE DIGITAL (0-4 BAR) | 3 | |
| LST12457 | DIAL BORE GAGE 1.4-2.4IN | 1 | |
| LST51296 | RADIUS GAGE 1/32IN 17 64IN | 1 | |
| LST51298 | RADIUS GAGE 9/32IN 33 64IN | 1 | |
| LST52611 | GAGE, TELESCOPING 1/2 - 3/4 | 1 | |
| LST52612 | GAGE TELESCOPING 3/4-1 1/4 | 1 | |
| LST52613 | TELESCOPING GAGE 1-1/4-2-1/8" | 1 | |
| LST52718 | 644JZ DIAL DEPTH GAGE | 1 | |
| LST67677 | BORE GAGE 2 5/8 - 3 1/4 | 1 | |
| LST67678 | BORE GAGE 3 1/4 - 4 | 1 | |
| LST68133 | BORE GAGE 5/8 - 3/4 | 1 | |
| LST68134 | BORE GAGE 3/4 - 1 | 1 | |
| LTCT6917 | 34. GAGE SPLINE | 1 | |
| M22520/3-1 | GAGE GO.0390 NO-GO.044 | 10 | |
| M22520/3-13 | GAGE G265 FOR Y540 & X528 | 1 | |
| M22520/3-14 | GAGE G266 FOR Y540 & X528 | 1 | |
| M22520/3-3 | GAGE G145 FOR MH860 | 1 | |
| M22520/39-01 | GAGE GO .025/.0420/.0620 - NO-GO .035/.0520/.0720 | 1 | |
| M22520/6-009 | GAGE G190 FOR Y143 X155 | 1 | |
| M22520/6-010 | GAGE G191 FOR Y143/Y212 | 1 | |
| M22520/6-014 | GAGE G194 FOR Y140 | 1 | |
| MDL24 | BORE GAGE_I.D13/4~3.0"RANGE_[MDL24] | 1 | |
| MIT61B04020 | Rigging gage-type a door lift system 747-300 | 3 | |
| MODEL 966A1 | OPTICAL MICROMETER GAGES OR WIRES - 0.004 TO 0.020 INCHES | 4 | |
| MODEL EP | PRESSURE GAGE 4" DIAL | 1 | |
| MODEL: K40 | TRACTEUR DE BAGAGES SOVAM (MODEL: K40) | 1 | |
| MODL E SERIES | PRESSURE GAGE 4" DIAL | 1 | |
| MT0000243 | BORE GAGE 100-160/0.01MM 511-714 | 1 | |
| MTS-0170 | CYLINDER GAGE 1.4"-2.4" | 1 | |
| NB602672LONGCT | GAGE BLOCKS, RANGE: 0 TO 48 INCH, 8 PIECE SET, ACC | 1 | |
| NRK-3AST | GAGE SET NSN 5280-01-352-1336, CONSIST OF 7075T6, 4340 & 6AL4V STANDARDS | 1 | |
| PWA 102903 | INDICATOR GAGE (REPLACES PWA 102844) | 1 | |
| PWA 112010 | GAGE, HYDRAULIC PRESSURE − HYDRAULIC PUMP REPLACES 75048 | 1 | |
| PWA102391 | GAGE (REPLACES PWA 47926) | 1 | |
| PWA102903 | GAGE, INDICATOR (REPLACES PWA 102844) | 1 | |
| PWA11433 | GAGE - NO.1 BRG CONTACT ANGLE INSP_[PWA11433] | 1 | |
| PWA25940 | GAGE - STATOR, HPC 9TH VANE ANGLE CHKG_[PWA25940] | 1 | |
| PWA25941 | GAGE - STATOR HPC 11TH VANE ANGLE CHK_[PWA25941] | 1 | |
| PWA25942 | GAGE - COMP STATOR 11TH STG VANE L/E_[PWA25942] | 1 | |
| PWA25943 | GAGE - STATOR, HPC 12,13 &14TH VANE ANGL_[PWA25943] | 1 | |
| PWA25944 | GAGE, STATOR - HPC 12,13 & 14TH VANE ANG_[PWA25944] | 1 | |
| PWA26004 | GAGE - MGB F/P BEVEL GEAR THICKNESS CHK_[PWA26004] | 1 | |
| PWA26644 | GAGE, BLADE WEAR - HPC 5TH STAGE_[PWA26644] | 2 | |
| PWA26645E | GAGE - BLADE, HPC 6TH STAGE_[PWA26645E] | 1 | |
| PWA26646F | GAGE, BLADE WEAR - HPC 7TH STAGE_[PWA26646F] | 1 | |
| PWA26647 | GAGE, BLADE WEAR - HPC 8TH STAGE_[PWA26647] | 2 | |
| PWA26648 | GAGE - BLADE, HPC 9TH STAGE_[PWA26648] | 2 | |
| PWA26649 | GAGE, BLADE WEAR - HPC 10TH STG BLADE_[PWA26649] | 2 | |
| PWA26683 | GAGE, BLADE WEAR - HPC 14TH STAGE_[PWA26683] | 2 | |
| PWA26684 | GAGE - BLADE WEAR, HPC 15TH STAGE_[PWA26684] | 2 | |
| PWA27724 | GAGE SET, AIRFOIL CONTOUR - 1ST TURB VN_[PWA27724] | 1 | |
| PWA27850 | GAGE, STRETCH - LPC 2,3 & 4 TIERODS_[PWA27850] | 2 | |
| PWA27854B | GAGE - 2ND STG TURB VANE CLASSIFICATION_[PWA27854B] | 1 | |
| PWA28224 | GAGE, NO GO - BLADE, HPC 7TH STG CHORD_[PWA28224] | 1 | |
| PWA28231 | GAGE, NO GO - HPC 14TH STAGE CHORD WIDTH_[PWA28231] | 1 | |
| PWA28241 | GAGES - Z.PLANE DIA 5TH STG COMPR DISK_[PWA28241] | 1 | |
| PWA28242 | GAGE - DISK, HPC 6TH STG Z-PLANE DIA._[PWA28242] | 1 | |
| PWA28243 | GAGE - DISKS,HPC 7TH~15TH STG Z-PL DIA._[PWA28243] | 1 | |
| PWA28252D | GAGE, AXIAL DEFLECTION - LPT 4TH STG VAN_[PWA28252D] | 1 | |
| PWA28254 | GAGE, AXIAL DEFLECTION - LPT 6TH STG VAN_[PWA28254] | 1 | |
| PWA28462 | GAGE,POSITION - MGB CSD TRANSFER TUBE_[PWA28462] | 3 | |
| PWA28648 | GAGE_[PWA28648] | 1 | |
| PWA28694 | GAGE - LOW TURBINE POSITION_[PWA28694] | 1 | |
| PWA29074 | GAGE - 3.0 BLEED MODULATING LINKAGE_[PWA29074] | 2 | |
| PWA29156 | GAGE - FAN CASE RUB STRIP_127X102X102MM/0.45KG_[PWA29156] | 7 | |
| PWA29156-1 | GAGE - FAN CASE RUB STRIP_127X102X102MM/0.45KG_[PWA29156] | 1 | |
| PWA29340A | GAGE, FLUSH PIN - IMC #2 BRG SEATING_[PWA29340A] | 1 | |
| PWA29679 | GAGE SET, AIRFOIL - LPT 4TH STG VANE_[PWA29679] | 1 | |
| PWA29780 | GAGE - 3.0 BLEED FEEDBACK CABLE_27X25.4X12.7MM/0.225KG_[PWA29780] | 1 | |
| PWA29847 | GAGE_[PWA29847] | 2 | |
| PWA33782 | GAGE,NO GO-2ND & 4TH STS TURB DISK-PLANE SLOT WEAR | 1 | |
| PWA33782 REV A | GAGE,NO GO-2ND & 4TH STS. TURB. DISK,-PLANE SLOT WEAR | 1 | |
| PWA35054 | TF33/JT3 TURBINE VANES STAGE 4 - CLASSIFICATION GAGE | 1 | |
| PWA35055 | TF33/JT3 TURBINE VANES STAGE 4 - CLASSIFICATION GAGE MASTER | 1 | |
| PWA75028 | HYDRAULIC PRESS GAGE - HPC FRONT HUB_TO MEASURE PRESS_254 X 254 X 76 MM / 0.5 KG_[PWA75028] | 6 | |
| PWA75423 | GAGE_[PWA75423] | 2 | |
| PWA75443 | GAGE_[PWA75443] | 1 | |
| PWA75509 | GAGE IMMERSION - SPARK IGNITER_TO MEASURE DIST FR OUTER TO LINER_0.9 KG / 203 X 64 X 64 MM_[PWA75509] | 4 | |
| PWA76334 | C GAGE, BLADE_[PWA76334] | 1 | |
| PWA86141 | GAGE ( SB PW4ENG 72-227 REV1 )_203X76X25MM/0.5KG_[PWA86141] | 1 | |
| PWA86282 | GAGE ID HPC 14TH STAGE RUBSTRIP | 1 | |
| PWC34061 | GAGE, AXIAL POSITION CHECK PWC34061 | 6 | |
| PWC34161 | GAGE,AXIAL POSITION CHECK PWC34161 | 4 | |
| PWC50374 | FLUSH PIN GAGE PWC50374 | 3 | |
| PWC70345 | GAGE PWC70345 | 2 | |
| PWC71903 | GROWTH GAGE - *P/N:3079351-01 - Blade Turbine requires qty 4 | 4 | |
| PWC72341 | GAGE CT BLADE GROWTH PT6A-140 | 1 | |
| RGS-300 | RADIUS GAGE SET 25 PIECES 1/64 TO 17/64'' | 1 | |
| RSN-3AST | Gage Set NSN 5280-01-352-1336, Consist of 7075T6, 4340 & 6AL4V Standards | 1 | |
| RTSG0-01-04 | MARKING GAGE 1/4 | 3 | |
| RTSG0-51-04 | INSPECTION GAGE 1/4 | 1 | |
| S-4000-060 | PIN GAGE SET_(0.011 ~ 0.060) INCH_[S-4000-060] | 2 | |
| S829EZ | STARRETT® 4 Piece Small Hole Ball Gage Set - USA MADE! | 2 | |
| S831EZ | HOLE GAGE SET 4 PIECE HALF BALL CASE | 2 | |
| SA30032 | BEARING ALIGNMENT MANDREL AND GAP GAGE 32-42-92 | 2 | |
| SA30056 | BEARING ALIGNMENT MANDREL AND GAP GAGE 32-42-91 | 2 | |
| SB06-752B20 | NOSE ASSEMBLY - ;GAGE BILT (BACB30VX6P04U) | 4 | |
| SB08-204D-27OS | GAGE BILT NOSE ASSY HUCK GUN OFFSET 1/46" | 1 | |
| SB08-713A-58RA | GAGE BILT NOSE ASSY HUCK GUN RIGHT ANGLE 1/4" | 1 | |
| SITRANS P | DIFFERENTIAL PRESSURE GAGE (2.4 TO 240 INH2O (0.0867 TO 8.67 PSIG (0.597 TO 59.78 KPA)), ACCURACY: ±1% OF FULL SCALE) SIEMENS, SITRANS P, SERIES DSIII, TRANSMITTER MODEL 7MF4432-1EA22-1AC7-7 | 1 | |
| SPD21004 | 2 1/4"100PSIGAGE/CLT2 W/O41910 | 1 | |
| ST1396J-H-8 | HAND GUN-DRIVEN GAGE 1/4" | 1 | |
| ST8709H | GO/NO-GO GAGE - FOR ASSEMBLY OF WIGGINS BACC42R COUPLING | 6 | |
| ST8709H-1 | Standard tool-go-no-go gage for assy，of wiggins BACC42R coupling | 7 | |
| ST8709H-2 | Standard tool-go-no-go gage for assy，of wiggins BACC42R coupling | 5 | |
| ST8709H-3 | Standard tool-go-no-go gage for assy，of wiggins BACC42R coupling | 5 | |
| ST8709H-4 | Standard tool-go-no-go gage for assy，of wiggins BACC42R coupling | 8 | |
| ST8709H-5 | Standard tool-go-no-go gage for assy，of wiggins BACC42R coupling | 5 | |
| ST8709H-6 | Standard tool-go-no-go gage for assy，of wiggins BACC42R coupling | 5 | |
| ST8709H-7 | Standard tool-go-no-go gage for assy，of wiggins BACC42R coupling | 6 | |
| ST8709H-KIT | GO/NO-GO GAGE FOR ASSEMBLY OF WIGGINS BACC42R COUPLING | 2 | |
| ST8709H-X | Gage - Go/No-Go, Fuel Wiggins Coupling (BACC42R); X indicates gage number -1 to -7 | 2 | |
| ST8712PC-8 | AD SLEEVE BOLT: SP1 AND SP2 SLEEVE PROTRUSION GAGE 4 (0.500) | 1 | |
| STDN 14-0-N | MANDRELS GAGE (KIT STDN 14-0-N) | 1 | |
| T-S506 | TIRE INFLATOR GAGE CM34 | 1 | |
| TUBE1"3/4ODX11GAGEX12"-SS304 | TUBE 1"3/4OD X 11GAGE (0.120) X 12" SS304 | 1 | |
| USGMODEL5080/5PSI | GAGE "USG" 47864 , USG Model 508 0/5psi | 1 | |
| V/1945-02-05 | AIR PRESSURE GAGE_(0 ~ 30) IN.HG (0.1) ±0.5 %_[V/1945-02-05] | 1 | |
| WAVEBRT100-8 | PADDLE GAGE BUT REMOVAL 1/4 | 1 | |
| WC-FR-14-0-N-4340 | GAGE FINISH REAMER (KIT STDN 14-0-N) | 1 | |
| WCI-CBG-06-3-N | COMBINATION GAGE, 1/4" 1ST OVERSIZE Ø.2350-.2380 , Ø.2390 | 2 | |
| WCI-CBG-08-1-N | COMBINATION GAGE, 1/4" 1ST OVERSIZE Ø.2350-.2380 , Ø.2390 | 2 | |
| WCI-CBG-14-0-N | COMBINATION GAGES (KIT STDN 14-0-N) | 2 | |
| WCI-FHG-****-XXXX | GAGE FINISH REAMER (KIT STDN 14-0-N) | 1 | |
| WCI-FHG-2495-2500 | FINAL HOLE GAGES, REF: FTI, P/N: CBFG-40-.2495/.25 | 1 | |
| WCI-FHG-2495-2505 | FINAL HOLE GAGES, REF: FTI, P/N: CBFG-40-.2495/.25 | 1 | |
| WCI-FHG-4340-4350 | GAGE FINISH REAMER (KIT STDN 14-0-N) | 1 | |
| WCI-FR-06-0-N-1850-RA | RIGHT ANGLE GAGE FINISH REAMER (0.184" - 0.186") | 2 | |
| WCI-FR-06-2-N-2294 | GAGE REAMER .2319/.2294 | 1 | |
| WCI-FR-06-3-N-2290 | GAGE REAMER .2319/.2294 | 1 | |
| WCI-FR-08-0-N-2450 | GAGE REAMER .2480/.2450 | 1 | |
| WCI-FR-08-0-N-2465-RA | RIGHT ANGLE GAGE FINISH REAMER. (0.246" - 0.248") | 2 | |
| WCI-FR-A40-2495 | GAGE FINISH REAMERS, REF: FTI, P/N: CAR-40-1-.2495 | 1 | |
| WCI-FR-A40-2495-CBD | GAGE FINISH REAMERS, REF: FTI, P/N: CAR-40-1-.2495 | 1 | |
| WCI-WGX-08-0 | MANDREL WEAR GAGE,FOR 1/4" NOMINAL HOLE SIZE | 1 | |
| WCI-WGX-08-1 | MANDREL WEAR GAGE,FOR 17/64" NOMINAL HOLE SIZE | 1 | |
| WCI-WGX-10-1 | MANDREL WEAR GAGE,FOR 21/64" NOMINAL FASTENER SI | 1 | |
| WCIS-WG-14-0-N | MANDRELS GAGE (KIT STDN 14-0-N) | 2 | |
| Y550 | Die Set #8 - Uses G664 Gage | 3 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
