| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| WA23-184DA | GAGE 2 | 3 | |
| WA23-185L | GAGE 2 | 3 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 02.02.4033 | HELICOIL OVERSIZE INSERT 2B THREAD GO-HI GAGE | 1 | |
| 02.02.4034 | HELICOIL OVERSIZE INSERT 2B THREAD GO-HI GAGE | 1 | |
| 02.03.4034 | HELICOIL OVERSIZE INSERT 2B THREAD GO-HI GAGE | 1 | |
| 02.04.4033 | HELICOIL OVERSIZE INSERT 2B THREAD GO-HI GAGE | 1 | |
| 02.04.4034 | HELICOIL OVERSIZE INSERT 2B THREAD GO-HI GAGE | 1 | |
| 02.05.4034 | HELICOIL OVERSIZE INSERT 2B THREAD GO-HI GAGE | 1 | |
| 02.06.4033 | HELICOIL OVERSIZE INSERT 2B THREAD GO-HI GAGE | 1 | |
| 02.06.4034 | HELICOIL OVERSIZE INSERT 2B THREAD GO-HI GAGE | 1 | |
| 06-042-D | STRUT GAGE( 06-042-D) | 1 | |
| 106 | GAGE,DEPTH,MICROMETER;2.500";PROVIDED;0.0010";MULTIPLE ROD; 0.000 TO 6.000";NOT INCLUDED;6;1/8 IN. DIA;| | 1 | |
| 11851 | GAGE G189 FOR Y216 | 1 | |
| 14145 | SWITCHGAGE, FUEL (MURPHY) 24V | 2 | |
| 060175 | Sensor Gaged MTX 20z | 1 | |
| 063600 | Sensor Gaged for BMX20z | 1 | |
| 063604 | Sensor Gaged for BMX25i | 1 | |
| 063607 | Sensor Gaged for BMX250i | 1 | |
| 063612 | Sensor Gaged for BMX250F | 1 | |
| 063615 | Sensor Gaged for BMX2500F | 1 | |
| 100547 | GAGE, PRESSURE, PANEL MOUNT,200PSI | 1 | |
| 101-00212 | TORQUE SYSTEM PRESSURE TESTER (WITH 0-100 INSP. GAGE) BARFIELD MODEL 2311-F | 9 | |
| 1082-00-20 | GAGE, HYDRAULIC PRESSURE: 0 TO 20 PSIG (138 KPAG) ,0 TO 100 PSIG (690 KPAG),0 TO 250 PSIG (1724 KPAG),0 TO 300 PSIG (2069 KPAG),0 TO 600 PSIG (4137 KPAG) AND 0 TO 5000 PSIG (34475 KPAG) | 1 | |
| 1159GSE50029 | GAGE PIN, 0.562 INCH DIAMETER | 1 | |
| 139-00-115-01 | BAGGAGE BAR 2226 | 1 | |
| 14-6805-6010 | NITROGEN PRESSURE GAGE(GSE1220206 OR EQUIVALENT) | 20 | |
| 14-6806-6011 | 1.PRESSURE GAGE( GSE3200197 OR EQUIVALENT) | 23 | |
| 14-6807-6011 | GAGE - TIRE PRESSURE, 0-300 PSIG (0-2069 KPA), STD-1132 | 19 | |
| 1409-161951 | GAGE PRESSURE 0-200 PSI | 1 | |
| 1409-161956 | GAGE PRESSURE 0-2000 PSI | 1 | |
| 1440-2 | GAGES PART NUMBER: 1440-2, SUPPLIER CODE: K1012/01558 | 3 | |
| 1442-04 | HELICOIL STANDARD INSERT 2B THREAD GO-HI GAGE | 1 | |
| 1442-06 | HELICOIL STANDARD INSERT 2B THREAD GO-HI GAGE | 1 | |
| 1442-2 | HELICOIL STANDARD INSERT 2B THREAD GO-HI GAGE | 1 | |
| 1443-2 | HELICOIL STANDARD INSERT 2B THREAD GO-HI GAGE | 1 | |
| 1443-3 | HELICOIL STANDARD INSERT 2B THREAD GO-HI GAGE | 1 | |
| 1443-4 | HELICOIL STANDARD INSERT 2B THREAD GO-HI GAGE | 1 | |
| 1443-5 | HELICOIL STANDARD INSERT 2B THREAD GO-HI GAGE | 1 | |
| 1443-6 | HELICOIL STANDARD INSERT 2B THREAD GO-HI GAGE | 1 | |
| 1527T-305332 | GAGE,PLUG,THREAD,GO-NOGO,1"-12UNF,DOUBLE-END,TRU | 1 | |
| 1527T-315333 | GAGE,PLUG,THREAD,GO-NOGO,1"-12UNF,DOUBLE-END,TRU | 1 | |
| 155-903 | GAGE SET TELESCOPING - 5210004739350 | 3 | |
| 15F2800 | CART - BAGGAGE - 60 INCH X 120 INCH OPEN STYLE WITH REMOVABLE END PANELS - 8,000 LB CAPACITY | 1 | |
| 18-35 | DRILL GAGE METRIC 1.5 TO 12.5 | 1 | |
| 187 | STARRETT® Fractional 1/16" thru 1/2" EZ Read Drill Gage- USA MADE! | 3 | |
| 2-1522HST | HI-LITE PROTRUSION GAGE #5-12 DIA | 1 | |
| 2.0625-16-UNS-3B-NO-GO | GAGE - 2\.0625-16-UNS-3B NO GO/2\.0272 PITCH DIA (FOR ST | 1 | |
| 210-007 | CANOPY COVER, Wrap-Around (early mod's, with struts, with rear window, 1962-66, aft extension over baggage door) | 1 | |
| 210-009 | CANOPY COVER, over top type, B thru F models, 1962-66, aft extension over baggage door | 1 | |
| 210-013 | EXTENDED CANOPY COVER, over-top type, 1962-66: w/struts, w/rear window), extends to cover baggage door | 1 | |
| 2141-201A | DIGITAL DEPTH GAGE - RANGE: 0-12"/300MM ACCURACY: /- 0.0008/.02MM | 1 | |
| 2141-202 | GAGE,DEPTH,DIGITAL DISPLAY;|DIGITAL D GAUGE;FOR TOOL STORE FOR SERVICE HELI BELL 206 / 429;WWW.INSIZE.COM; | 1 | |
| 230 | FEELER GAGES #230 | 6 | |
| 2311FA | TESTER,PRESSURE GAGE 2311FA | 7 | |
| 232 | FEELER GAGE SET 15 PC 6 L .0020 - .025 | 4 | |
| 231843 | PPG Semco 231843 14 Gage 12 Dark Green Sem-Luer Needles | 1 | |
| 231844 | PPG Semco 231844 14 Gage 1 Dark Green Sem-Luer Needles | 2 | |
| 231845 | PPG Semco 231845 15 Gage 12 Orange Sem-Luer Needle | 1 | |
| 231846 | PPG Semco 231846 15 Gage 1 Orange Sem-Luer Needle | 1 | |
| 231849 | PPG Semco 231849 18 Gage 12 Pink Sem-Luer Needle | 1 | |
| 231850 | PPG Semco 231850 18 Gage 1 Pink Sem-Luer Needle | 1 | |
| 231851 | PPG Semco 231851 19 Gage 12 Brown Sem-Luer Needle | 1 | |
| 231852 | PPG Semco 231852 19 Gage 1 Brown Sem-Luer Needle | 1 | |
| 231853 | PPG Semco 231853 20 Gage 12 Yellow Sem-Luer Needle | 1 | |
| 231854 | PPG Semco 231854 20 Gage 1 Yellow Sem-Luer Needle | 1 | |
| 231855 | PPG Semco 231855 21 Gage 12 Green Sem-Luer Needle | 1 | |
| 231856 | PPG Semco 231856 21 Gage 1 Green Sem-Luer Needle | 1 | |
| 231857 | PPG Semco 231857 22 Gage 12 Black Sem-Luer Needle | 1 | |
| 231859 | PPG Semco 231859 23 Gage 12 Light Blue Sem-Luer Needle | 1 | |
| 231860 | PPG Semco 231860 23 Gage 1 Light Blue Sem-Luer Needle | 1 | |
| 231863 | PPG Semco 231863 25 Gage 12 Blue Sem-Luer Needle | 1 | |
| 231864 | PPG Semco 231864 25 Gage 1 Blue Sem-Luer Needle | 1 | |
| 231866 | PPG Semco 231866 26 Gage 12 Peach Sem-Luer Needle | 1 | |
| 231867 | PPG Semco 231867 27 Gage 516 Tan Sem-Luer Needle | 1 | |
| 231869 | PPG Semco 231869 30 Gage 516 Lavender Sem-Luer Needle | 1 | |
| 232728 | PPG Semco 232728 14 Gage 1 Dark Green Sem-Flex Needle | 1 | |
| 232734 | PPG Semco 232734 18 Gage 2 Pink Sem-Flex Needle | 1 | |
| 232736 | PPG Semco 232736 20 Gage 1 Yellow Sem-Flex Needle | 1 | |
| 232742 | PPG Semco 232742 23 Gage 1 Light Blue Sem-Flex Needle | 1 | |
| 232748 | PPG Semco 232748 28 Gage 1 Tan Sem-Flex Needle | 1 | |
| 232749 | PPG Semco 232749 30 Gage 12 Lavender Sem-Flex Needle | 1 | |
| 232893 | PPG Semco 232893 26 Gage 18 Peach Sem-Flex Needle | 1 | |
| 1177697 | HAND BRAKE CABLE (FOR TLD BAGGAGE TRACTOR, MODEL: JST-30 S/L: T58941, T58942, T58943) | 1 | |
| 2001591 | model 2959 Luggage Valet Cart. | 1 | |
| 23002243 | GAGE, IND. 2ND STG BLADE TIP SHAKE | 1 | |
| 23060616 | Gage - 2nd Stage Vane Aft Platform Radius. | 1 | |
| 23060617 | Gage - 2nd Stage Vane Inner Honeycomb Seal | 1 | |
| 23060619 | Gage - 2nd Stage Gas Generator Blade Tracks | 1 | |
| 23060621 | Gage - 2nd Stage Vane Forward Platform Face | 1 | |
| 23060765 | Gage - HP 2nd Stage Vane Forward Platform Radius | 1 | |
| 23060767 | Gage – LP Turbine 2nd Stage Blade Tracks | 1 | |
| 23060769 | Gage – Low Pressure 2nd & 3rd Stage Vane Inner Honeycomb Seal | 1 | |
| 23068612 | Gage – Seal, HP & LP 3.428R | 1 | |
| 247C5039 | GAGE, LENGTH-BLADE HPTR STG 1-2 | 1 | |
| 25DL | ULTRASONIC THICKNESS GAGE PANAMETRICS MODEL 25DL | 1 | |
| 269B | STARRETT 269B TAPER GAGE ( 0.5” - 1 “ ) | 2 | |
| 269B12 | CherryMAXIBOLT 269B12 Lockbolt Grip Gage | 2 | |
| 269C3 | CherryMaxCherryLOCK 269C3 Grip Selector Gage | 10 | |
| 26MG-XT | DIGITAL ULTRASONIC THICKNESS GAGE (PANAMETRICS INC., 221 CRESCENT STREET, WALTHAM, MA 02154-2719, U.S.A.) | 1 | |
| 281988-1-1 | SHIM CLEARANCE GAGE (2 IT) | 1 | |
| 282645 | GAGE - ACCELERATION LIMITER, FUEL CONTROL CRACK PRESSURE - GTCP85-129 ONLY | 7 | |
| 2843-006 | GAGE, MANDREL CHECK(1.0285) | 1 | |
| 28A | GAGE, SMALL, 200-300 | 1 | |
| 2900-5-1R | STARRET 2900-5-1R RIVET HEIGHT GAGE | 1 | |
| 2900-51R | RIVET HEIGHT GAGE - 2900-5-1R W/683-3 BODY | 1 | |
| 294884-1 | DUMMY SHAFT (LOCATES OVER TURBINE END OF 3822077-1 TIE SHAFT AND ENGAGE ON SHAFT) | 1 | |
| 297292-1 | (NSN: 5220-01-687-5924), GAGE, RING, MASTER SETTING | 1 | |
| 298108-1 | FAN SHAFT STRETCH GAGE [PRE SB TFE731-72-3637 | 1 | |
| 2C14796G02 | GAGE, LENGTH - HPT ROTOR STAGE 2 BLADE | 2 | |
| 2C641 | ASCROFT 0-5 PSI , +/- 1 PRESSURE GAGE, ¼ NPT X 2.5 DIA | 2 | |
| 2C6613G01 | GAGE BHGE 2C6613G01, IMMERSION DEPTH USED IN WP 1516 00 SPECIAL TOOL FOR IGNITER PLUG REPLACEMENT | 10 | |
| 2C6962G05 | GAGE SIGHT (CF6-6,-50,-80A,-80C2,-80E1 | 8 | |
| 2C6963G04 | Gage Set, IGV, Stg.1-4 (80A3 / C2) | 2 | |
| 2C6966G05 | GAGE, SIGHT - COMPRESSOR STATOR VANE ACT ARMS 2C6966G05 | 7 | |
| 2C6966G05TK | VSV Lever Arm Gage (80A3/C2) | 1 | |
| 2C6966G07 | GAGE, SIGHT BHGE 2C6966G07 FOR VSV ACTUATION ARMS USED IN WP 4028 00 SPECIAL TOOL FOR HIGH PRESSURE COMPRESSOR IGV AND VSV VISUAL INDPECTION | 3 | |
| 2C8016G01 | VSV Sight Gage (80C2) HPT Pressure Tube | 2 | |
| 2C8016G03 | GAGE, SIGHT BHGE 2C8016G03 FOR VSV STAGE 5 ACTUATION ARMS USED IN WP 4028 00 SPECIAL TOOL FOR HIGH PRESSURE COMPRESSOR IGV AND VSV VISUAL INDPECTION | 2 | |
| 2R1121G02 | GAGE SET, TANG HANG - STAGE 2 | 1 | |
| 3030 | PRESSURE GAGE 7000 PSI ±0.2%FS | 3 | |
| 332A94-3182-00 | TOOLING ASSEMBLY,LANDING GEAR (ICO 13-30-90-02) CHECK GAGE 000 | 1 | |
| 3402-3 | POSITIONER, STATIC, 12 GAGE | 1 | |
| 35-1009-SW-02L-200PSI | PRESSURE GAGE (2 REQUIRED (0 TO 300 PSIG (0 TO 2068 KPA), ±1% OF FULL SCALE) (ASHCROFT) | 1 | |
| 3648-260 | HARDENED BASE EXTENSION 260 MM USED FOR 3753 SERIES ELECTRONIC DEPTH GAGES STARRETT PART NO: 3648-260 | 1 | |
| 3C-681-25 | GAGE BILT 3C-681-25 Straight Non Self-Releasing 332 Blind Rivet Pulling Head | 1 | |
| 4001256-1 | BEARING ALIGNMENT & GAP GAGE [ P/N CMM : AM29363 ] | 1 | |
| 4088K42 | PRESSURE GAGE 138 BAR ( 2000PSI) | 1 | |
| 414DA-4N | GAGE .200 | 2 | |
| 451082PS02L200#XPDXC4 | TEST GAGE MODEL 1082 0-200PSI | 1 | |
| 456MAX-731-430S | Gage Bilt Offset Pulling Head for model GB752 Gun | 3 | |
| 456MAX-751A-21 | Gage Bilt Straight Pulling Head for model GB752 Gun | 1 | |
| 456MAX-751D-54RA | Gage Bilt Right Angle Pulling Head for model GB752 Gun | 2 | |
| 47907-1 | CRIMPER CRIMP 22 GAGE. | 8 | |
| 492037Z146105 | RE-ENGAGEMENT TOOL - BUSHING (856A3924G01) | 1 | |
| 493 | GAGE,THICKNESS:STRAIGHT,3.312" BLADE LG | 1 | |
| 46647 | CRIMP TOOL SIZE GAGE 16-22 | 1 | |
| 4823-1 | GAGE (FOR ST2220-10 TOOL) | 1 | |
| 4GP | PLUG, MS GAGE PORT, WITHO-RING(D18302 VALVE/REGULATORS) | 1 | |
| 4KY23 | DIAL DEPTH GAGE 22" / WESTWARD 10 PCS | 2 | |
| 516-126 | GAGE BLOCK SET_[516-126] | 1 | |
| 516-704-10 | PLANE GAGE BLOCKS -GRADE 2; -8 BLOCKS PER SET | 1 | |
| 516-944-11 | GAGE BLOCK SET;|GAUGE BLOCKS STEEL,MEASURING,GRADE 2; | 1 | |
| 527-113 | VERNIER DEPTH GAGE_[527-113] | 1 | |
| 53-022-100 | 20-INCH GAGE BLOCK, COMPARATOR, RESOLUTION: 0.1 Μ IN. | 1 | |
| 60-1125-SW-02L-200PSI | DIFFERENTIAL PRESSURE GAGE (0 TO 300 PSIG (0 TO 2068 KPA), ±1% OF FULL SCALE) (ASHCROFT) | 1 | |
| 60092 | ELCON 29 GO/NO GO GAGE | 1 | |
| 612179 | MULTIPURPOSE PIN CRIMPER 16 TO 22 GAGE. | 2 | |
| 615716 | GAGE (M22520/3-1) | 1 | |
| 616337 | GAGE (M22520/3-3) | 1 | |
| 620156 | GAGE (M22520/3-2) | 1 | |
| 620667-G | GAGE-FOR 620667 | 1 | |
| 620770-G | GAGE-FOR 620770 DIE | 1 | |
| 620784-G | GAGE-FOR 620784 DIE | 1 | |
| 620963-G | GAGE-FOR 620963 DIE | 1 | |
| 620964-G | GAGE-FOR 620964 DIE | 1 | |
| 621051 | GAGE (M22520/3-4) | 1 | |
| 621052 | GAGE (M22520/3-5) FOR M/19-01 | 1 | |
| 621053 | GAGE (M22520/3-6) | 1 | |
| 621054 | GAGE (M22520/3-7) | 1 | |
| 621055 | GAGE (M22520/3-8) | 1 | |
| 621056 | GAGE (M22520/3-9) FOR M/5-100, /10-100 | 1 | |
| 621057 | GAGE (M22520/3-10) FOR M/5-100, /10-101 | 1 | |
| 621060 | GAGE (= TO M22520/3-13) | 1 | |
| 621061 | GAGE (= TO M22520/3-14) | 1 | |
| 621062 | GAGE (= TO M22520/3-15) | 1 | |
| 621064 | GAGE (= TO M22520/35) | 1 | |
| 621068 | GAGE (MS3196-20) | 1 | |
| 621071 | GAGE (MS3196-20A) | 1 | |
| 621073 | GAGE (MS3196-12A) | 1 | |
| 621081 | GAGE-FOR M/2-01 USE SEL.#4 | 1 | |
| 630067 | DIE SET (PIC)-GAGE: AGM06029 | 1 | |
| 630074-GC | GAGE, FOR .432" HEX | 1 | |
| 630129-GA | GAGE, FOR 630129 4.95MM | 1 | |
| 630129-GB | GAGE, FOR 630129 5.5MM | 1 | |
| 630130-GB | GAGE, FOR 630130 (.270 HEX) | 1 | |
| 630147-1GA | GAGE, FOR 630147-2 | 1 | |
| 630147-2GB | GAGE, FOR 630147-2 | 1 | |
| 631027-GA | GAGE, FLAT, FOR .042 HEX | 1 | |
| 643J | DIAL DEPTH GAGES RANGE 0-.125" | 1 | |
| 643JZ | 0-.125" X .0005" DIAL DEPTH GAGE - KNIFE EDGE | 11 | |
| 65425-101 | MASTER GAGE/ADAPTER ASSEMBLY 65425-101 | 1 | |
| 660001 | GAGE (MS3197-22X1) | 1 | |
| 660002 | GAGE (MS3197-22Y1) | 1 | |
| 660003 | GAGE (MS3197-20X1) | 1 | |
| 660016 | GAGE (MS3197-24Y1) | 1 | |
| 660019 | GAGE-FOR M/1-01 USE SEL. #2 | 1 | |
| 660023 | GAGE-FOR M/2-01 USE SEL.#1 | 1 | |
| 660024 | GAGE-FOR M/2 SEL.#2 | 1 | |
| 660025 | GAGE-FOR M/2 SEL.#3 | 1 | |
| 660027 | GAGE-FOR M/2-01 USE SEL.#5 | 1 | |
| 660028 | GAGE-FOR M/2-01 USE SEL.#6 | 1 | |
| 660029 | GAGE-FOR M/2-01 USE SEL.#7 | 1 | |
| 667-21 | GAGE FEELER 12" .021 | 1 | |
| 66MA | THICKNESS GAGE (20 LEAVES) 0.05-1MM | 1 | |
| 67514-101 | A320 FWD SLIDE PACKENVELOPE GAGE | 1 | |
| 67515-101 | A320 AFT SLIDE PACKENVELOPE GAGE | 1 | |
| 67808-101 | A320 AFT SIDE & SLIDE/RAFTPACK ENVELOPE GAGE | 2 | |
| 67809-101 | A320 FWD. SLIDE & SLIDE/RAFT PACK ENVELOPE GAGE | 2 | |
| 6T112X6 | LIFT-ALL 6" X 6 FT TYPE 1 ROUGHNECK WIRE MESH SLING - 12 GAGE - 4800 LBS WLL | 3 | |
| 6T212X6 | SLING - HOT BRAKE, TYPE 1, WIRE MESH, GALVANIZED HIGH CARBON;6 IN. WIDE, 12 GAGE, 6FT LONG MESH, 7FT LONG OVER ALL. | 3 | |
| 718A | 20 TON TRIPOD JACK / AIR ASSIST AND LOAD GAGE | 3 | |
| 7210 | ABSOLUTE DIAL DEPTH GAGE SERIES 7200 | 9 | |
| 74155 | ALMEN GAGE NO. 2 | 1 | |
| 704002 | Gage Bilt Powermax Riveter - Pulling Head Extensions - 2" | 1 | |
| 6872421 | GAGE - GO PLUG NO. 2 | 1 | |
| 7572-3B | INSTALL TOOL, TANGLESS GAGE STYLE, 10-32 | 2 | |
| 7901267 | GAGE BLOCKS, RANGE: 0.050 TO 20 IN. ACCURACY: SEE TEST REPORT | 1 | |
| 829A | GAGE 829A - STARETT HOLE | 3 | |
| 829B | GAGE 829B - STARETT HOLE | 2 | |
| 831412-1 | SPLINE WEAR INDICATION KIT (CONSISTS OF 831412-11/-13/-15/ -17/-19/-21 GAGES) | 1 | |
| 856A1206G06 | GAGE, RUNOUT - CDP SEAL (220V/50HZ) (RUNOUT GAGE) G04 | 9 | |
| 856A1331 | GAGE,SET-IGV, STG. 1,2,3 CAR. STATOR VANE CLEVIS | 1 | |
| 856A1331 REV D | GAGE,SET-IGV, STG. 1,2,3 CAR. STATOR VANE CLEVIS | 1 | |
| 856A1331G04 | GAGE SET IGV STG 1/2/3 VSV CLV ASSY | 1 | |
| 856A1434 | GAGE SET IGV , 123 | 1 | |
| 856A1818G02 | GAGE, SEATING CHECK MM01 TO MM02 | 8 | |
| 856A2660G01 | AXIAL CLERANCE MEASURE GAGE - LPT NOZZLE STG 2 | 5 | |
| 856A2660G02 | AXIAL CLERANCE MEASURE GAGE - LPT NOZZLE STG 2 | 5 | |
| 856A2660G03 | AXIAL CLERANCE MEASURE GAGE - LPT NOZZLE STG 2 | 1 | |
| 856A2660G09 | AXIAL CLERANCE MEASURE GAGE GÃÃ LPT NOZZLE STG 2 | 2 | |
| 856A2660G10 | AXIAL CLERANCE MEASURE GAGE – LPT NOZZLE STG 2 | 4 | |
| 856A2660G11 | AXIAL CLERANCE MEASURE GAGE - LPT NOZZLE STG 2 | 5 | |
| 856A2664G01 | A320/A330/A340/GAGE, SETTING-VBV DOORS | 24 | |
| 856A2676G01 | CHECK FEELER GAGE - LPT (FEELER GAGE)OBSELETE REPLACED BY 856A2676G02 | 1 | |
| 88-100 | Gage Set for AF8, M22520/1-01 | 4 | |
| 88-200 | Gage Set for AFM8, M22520/2-01 | 2 | |
| 88-700 | Gage Set for MH860, M22520/7-01 | 2 | |
| 90-PG6000 | Bowers 90-PG6000 Gagemaker Internal Thread Roll Gauge 2 1/2" Reach Range 1 1/2 - 9" | 1 | |
| 90-PG6001 | Bowers 90-PG6001 Gagemaker Internal Thread Roll Gauge 2 1/2" Reach Range 9 - 16" | 1 | |
| 90-PG6002 | Bowers 90-PG6002 Gagemaker Internal Thread Roll Gauge 2 1/2" Reach Range 16 - 24" | 1 | |
| 90-RG7002 | Bowers 90-RG7002 Gagemaker External Thread Roll Gauge Range 8-12" | 1 | |
| 90-RG7003 | Bowers 90-RG7003 Gagemaker External Thread Roll Gauge Range 12-16" | 1 | |
| 90-RG7004 | Bowers 90-RG7004 Gagemaker External Thread Roll Gauge Range 16-20" | 1 | |
| 90-RG7005 | Bowers 90-RG7005 Gagemaker External Thread Roll Gauge Range 20-24" | 1 | |
| 90-SPG6000 | Bowers 90-SPG6000 Gagemaker Internal Thread Roll Gauge 1" Reach Range 5/8 - 1 1/2" | 1 | |
| 90-TP-3-1.25-84 | Bowers Profile Gage 2 3/8" - 3 1/2" Hughes | 1 | |
| 90-TP-3.5-2-50 | Bowers Profile Gage 3 1/2" - 6 5/8" Hughes H-90 | 1 | |
| 90-TP-4-1.5-76 | Bowers Profile Gage 2 3/8" - 3 1/2" P.A.C. | 1 | |
| 90-TP-4-3-50 | Bowers Profile Gage 5 1/2", 7 5/8" & 8 5/8" | 1 | |
| 90-TP-5-3-40 | Bowers Profile Gage 2 3/8" - 4 1/2" API REG | 1 | |
| 90-TP-6-2-32 | Bowers Profile Gage 2 3/8" - 2 7/8" Hughes | 1 | |
| 90-TRA-10P | Bowers 90-TRA-10P Gagemaker Thread Roll ACME 10 Pitch (Set of 2) | 1 | |
| 90-TRA-12P | Bowers 90-TRA-12P Gagemaker Thread Roll ACME 12 Pitch (Set of 2) | 1 | |
| 90-TRA-14P | Bowers 90-TRA-14P Gagemaker Thread Roll ACME 14 Pitch (Set of 2) | 1 | |
| 90-TRA-16P | Bowers 90-TRA-16P Gagemaker Thread Roll ACME 16 Pitch (Set of 2) | 1 | |
| 90-TRA-18P | Bowers 90-TRA-18P Gagemaker Thread Roll ACME 18 Pitch (Set of 2) | 1 | |
| 90-TRA-3P | Bowers 90-TRA-3P Gagemaker Thread Roll ACME 3 Pitch (Set of 2) | 1 | |
| 90-TRA-4P | Bowers 90-TRA-4P Gagemaker Thread Roll ACME 4 Pitch (Set of 2) | 1 | |
| 90-TRA-5P | Bowers 90-TRA-5P Gagemaker Thread Roll ACME 5 Pitch (Set of 2) | 1 | |
| 90-TRA-6P | Bowers 90-TRA-6P Gagemaker Thread Roll ACME 6 Pitch (Set of 2) | 1 | |
| 90-TRA-8P | Bowers 90-TRA-8P Gagemaker Thread Roll ACME 8 Pitch (Set of 2) | 1 | |
| 90-TRB74512P | Bowers 90-TRB74512P Gagemaker Thread Rolls 12mm Pitch | 1 | |
| 90-TRB7452P | Bowers 90-TRB7452P Gagemaker Thread Rolls 2mm Pitch | 1 | |
| 90-TRME-25P | Bowers 90-TRME-25P Gagemaker Thread Roll External Metric 2.5mm Pitch | 1 | |
| 90-TRME-2P | Bowers 90-TRME-2P Gagemaker Thread Roll External Metric 2mm Pitch | 1 | |
| 90-TRMI-25P | Bowers 90-TRMI-25P Gagemaker Thread Roll Internal Metric 2mm Pitch | 1 | |
| 90-TRMI-2P | Bowers 90-TRMI-2P Gagemaker Thread Roll Internal Metric 2.5mm Pitch | 1 | |
| 90-TRSA-12P | Bowers 90-TRSA-12P Gagemaker Thread Roll Stub ACME 12 Pitch | 1 | |
| 9095 | JUMBO All Metal Drill Gage - For 1/2" thru 1" Drills | 1 | |
| 939-2 | 02 SYSTEM TEST EQUIPMENT PRESSURE GAGE (0 TO 100 PSI) (MM 35-00-00 / 20-52-00) | 2 | |
| 9429M94P01 | (LINIGAGE SYSTEM, 120V); W/WINDOWS-BASED LGWAS & (1) 20' 5506-1800 PROBE | 1 | |
| 95-93032-0005 | RIGGING FEELER GAGES, RUDDER, ELEVATOR AND ROLL CONTROL - SUPPORT EQUIPMENT AND TOOLS DATA 95-93032-0001 | 1 | |
| 950-251 | FEELER GAGE .002-.03 | 1 | |
| 97A27003000005 | GAGE,ASSY - PUSH-PULL OR 97A27003000007 | 8 | |
| 97A27003000007 | GAGE ASSY A320F | 21 | |
| 98A27508052000 | FEELER GAGE - FAIL SAFE SPIGOT RING, CARRIAGE 2 | 2 | |
| 98F27508206000 | GAGE-ADJUSTMENT, ROTARY ACTUACTORS (QTY 2) | 17 | |
| 99-3467 | GAGE BILT RIGHT ANGLE PULLING HEAD FOR MODEL GB752 GUN | 4 | |
| 999500 | ROTARY FLAP KIT WITH #2 ALMEN GAGE | 2 | |
| 999500.TSP | ROTARY FLAP KIT WITH #2 ALMEN GAGE | 1 | |
| 9C1022G01 | DEPTH GAGE_(0.5 ~ 6) INCH_[9C1022G01] | 1 | |
| 9C1666 | GAGE TUBE, OIL 1-2 BRG. | 1 | |
| A-305183 | REMOVAL TOOL 18 AND 20 GAGE AMP RECTANGULAR PLUGS. | 1 | |
| A005414D | CART - BAGGAGE - 60 INCH X 120 INCH OPEN STYLE WITH REMOVABLE END PANELS - 8,000 LB CAPACITY | 1 | |
| A12007-20 | GAGE - TIRE PRESSURE INFLATOR - TIRE GAUGE - TIRE PRESSURE, 0-300 PSIG (0-2069 KPA), /- 3 PSIG ACCURACY | 7 | |
| A12007-23 | GAGE - TIRE PRESSURE INFLATOR - TIRE GAUGE - TIRE PRESSURE, 0-300 PSIG (0-2069 KPA), /- 3 PSIG ACCURACY | 10 | |
| A1290-3G | GAGE (A1290-3, AP1290-3) | 1 | |
| A1290-4G | GAGE (FOR A1290-4, AP1290-4) | 1 | |
| A1290-6G | GAGE (FOR A1290-6) | 1 | |
| A1290-SP11G | GAGE (AP1290-SP11) OBSOLETE | 1 | |
| A1290-SP1G | GAGE (AP1290-SP1) OBSOLETE | 1 | |
| A1290-SP2G | GAGE (AP1290-SP2) OBSOLETE | 1 | |
| A1290-SP3G | GAGE (AP1290-SP3) OBSOLETE | 1 | |
| A1290-SP4G | GAGE (AP1290-SP4) OBSOLETE | 1 | |
| A1290-SP5G | GAGE (AP1290-SP5) OBSOLETE | 1 | |
| A1290-SP7G | GAGE (AP1290-SP7) OBSOLETE | 1 | |
| A1290-SP8G | GAGE (AP1290-SP8) OBSOLETE | 1 | |
| A27001-1 | GAGE - RUDDER PCA (2 NECESSARY) | 9 | |
| A27062-12 | GAGE ASSEMBLY (4 IT) & (EQ A27062-1A) | 1 | |
| A32092-3 | GAGE OPP -2 | 1 | |
| A322-1 | CRIMP TOOL, 22-26 GAGE | 1 | |
| A422-G | GAGE FOR A422 | 1 | |
| A768-210-30 | DIAL INDICATING PRESSURER GAGE (NSN 6685013269186) | 1 | |
| AEM210423008 | STEP GAGE .004-.008/1/2X3/1/2L | 1 | |
| AGM06001 | GAGE (EQUIVALENT TO M22520/6-001) | 1 | |
| AGM06002 | GAGE (EQUIVALENT TO M22520/6-002) | 1 | |
| AGM06003 | GAGE (EQUIVALENT TO M22520/6-003) | 1 | |
| AGM06004 | GAGE (EQUIVALENT TO M22520/6-004) | 1 | |
| AGM06005 | GAGE (EQUIVALENT TO M22520/6-005) | 1 | |
| AGM06006 | GAGE (EQUIVALENT TO M22520/6-006) | 1 | |
| AGM06007 | GAGE (EQUIVALENT TO M22520/6-007) | 1 | |
| AGM06008 | GAGE (EQUIVALENT TO M22520/6-008) | 1 | |
| AGM06009 | GAGE, (EQUIVALENT TO M22520/6-009) | 1 | |
| AGM06010 | GAGE (EQUIVALENT TO M22520/6-010) | 1 | |
| AGM06011 | GAGE (EQUIVALENT TO M22520/6-011) | 1 | |
| AGM06013 | GAGE (EQUIVALENT TO M22520/6-013) | 1 | |
| AGM06014 | GAGE (EQUIVALENT TO M22520/6-014) | 1 | |
| AGM06015 | GAGE (EQUIVALENT TO M22520/6-015) | 1 | |
| AGM06016 | GAGE (EQUIVALENT TO M22520/6-016) | 1 | |
| AGM06017 | GAGE (EQUIVALENT TO M22520/6-017) | 1 | |
| AGM06019 | GAGE (EQUIVALENT TO M22520/6-019) | 1 | |
| AGM06020 | GAGE (EQUIVALENT TO M22520/6-020) | 1 | |
| AGM06022 | GAGE (EQUIVALENT TO M22520/6-022) | 1 | |
| AGM06025 | GAGE (EQUIVALENT TO M22520/6-025) | 1 | |
| AGM06027 | GAGE (EQUIVALENT TO M22520/6-027) | 1 | |
| AGM06028 | GAGE (EQUIVALENT TO M22520/6-028) | 1 | |
| AGM06029 | GAGE (EQUIVALENT TO M22520/6-029) | 1 | |
| AGM06031 | GAGE (EQUIVALENT TO M22520/6-031) | 1 | |
| ALPHAGAGE+ CPDLWOS | AlphaGage+CP with Oxide Scale, 20MHz transducer required | 1 | |
| ALPHAGAGE+ PDLWOS | AlphaGage+ P with Oxide Scale, 20MHz transducer required | 1 | |
| AMT23002DA | DIE (M22520/23-02) 8 GAGE | 1 | |
| AMT23003DA | DIE ASSEMBLY (M22520/23-03) 6 GAGE | 1 | |
| AMT23004DA | DIE ASSEMBLY (M22520/23-04) 4 GAGE | 1 | |
| AMT23005DA | DIE ASSEMBLY (M22520/23-05) 0 GAGE | 1 | |
| AMT23006DA | DIE ASSEMBLY (M22520/23-06) 2/0 GAGE | 1 | |
| AMT23007DA | DIE ASSEMBLY (M22520/23-07) 4/0 GAGE | 1 | |
| AMT23009L | LOCATOR (M22520/23-09) 8 GAGE | 1 | |
| AMT23010L | LOCATOR (M22520/23-10) 6 GAGE | 1 | |
| AMT23011L | LOCATOR (M22520/23-11) 4 GAGE | 1 | |
| AMT23013L | LOCATOR (M22520/23-13)1/0 GAGE | 1 | |
| AMT23115L | LOCATOR, 12 GAGE | 1 | |
| AMT23153L | LOCATOR, 10-12 GAGE | 1 | |
| AMT23154DA | DIE ASSEMBLY, 12 GAGE, SPECIAL | 1 | |
| AMT23158L | LOCATOR, 2/0 GAGE | 1 | |
| AMT23168DA | DIE ASSEMBLY, 12 GAGE | 1 | |
| AMT23184DA | DIE ASSEMBLY, 2 GAGE | 1 | |
| AMT23185L | LOCATOR, 2 GAGE | 1 | |
| AMT23198DA | DIE ASSEMBLY, 2 GAGE | 1 | |
| AMT23203L | LOCATOR ASSEMBLY, 2 GAGE | 1 | |
| AMT23223L-BX | LOCATOR, 8 GAGE (=10-589525-8) | 1 | |
| AMT23252DA | DIE ASSEMBLY, 2 GAGE | 1 | |
| AMTG1801 | GAGE-M22520/18-01 | 1 | |
| AMTG2302 | GAGE-FOR M22520/23-02 | 1 | |
| AMTG2303 | GAGE-FOR M22520/23-03 | 1 | |
| AMTG2304 | GAGE-FOR M22520/23-04 | 1 | |
| AMTG2305 | GAGE-FOR M22520/23-05 | 1 | |
| AMTG2306 | GAGE-FOR M22520/23-06 | 1 | |
| AMTG2307 | GAGE-FOR M22520/23-07 | 1 | |
| AMTG23100 | GAGE-FOR AMT23100DA | 1 | |
| AMTG23101 | GAGE-FOR AMT23101DA | 1 | |
| AMTG23118 | GAGE-FOR AMT23118DA | 1 | |
| AMTG23130 | GAGE-FOR AMT23130DA | 1 | |
| AMTG23138 | GAGE-FOR AMT23138DA | 1 | |
| AMTG23140 | GAGE-FOR AMT23140DA | 1 | |
| AMTG23168 | GAGE-FOR AMT23168DA | 1 | |
| AMTG23170 | GAGE-FOR AMT23170DA | 1 | |
| AMTG23184 | GAGE-FOR AMT23184DA | 1 | |
| AMTG23197 | GAGE-FOR AMT23197DA | 1 | |
| AMTG23198 | GAGE-FOR AMT23198DA | 1 | |
| AMTG23199 | GAGE-FOR AMT23199DA | 1 | |
| AMTG23252 | GAGE-FOR AMT23252DA | 1 | |
| AMTG23257 | GAGE-FOR AMT23257DA | 1 | |
| AMTG23264 | GAGE-FOR AMT23264DA | 1 | |
| AMTG4301 | Gage Go/No-Go Size 22-16 - M22520/43-01 | 2 | |
| AMTG4302 | Gage Go/No-Go Size 16-14 - M22520/43-02 | 2 | |
| AMTG4303 | Gage Go/No-Go Size 22-16 - M22520/43-03 | 2 | |
| AMTG4304 | Gage Go/No-Go Size 16-14 - M22520/43-04 | 2 | |
| AP1290-11G | GAGE (FOR AP1290-11) | 1 | |
| AP1290-12G | GAGE (FOR AP1290-12) | 1 | |
| ASHCROFT 0-100 | ASHCROFT 0-100 PSI GAGE TO 2C14711G01 | 1 | |
| AT 0012 | CONTACT GAGE (12 GA.) | 1 | |
| AT 0020 | CONTACT GAGE (20 GA.) | 1 | |
| AT 0022 | CONTACT GAGE (22 GA.) | 1 | |
| AT2020 | REMOVAL TOOL 20 GAGE MALE AND FEMALE PINS: CANNON, BRUNDY AND BENDIX ROUND PLUGS. | 4 | |
| AT4000 | INSERTION TOOL 22 GAGE DEUTSCH CONNECTOR. | 2 | |
| ATB1067 | INSERTION TOOL 20 GAGE FEMALE ROUND CANNON PLUG (WITHOUT SPRING LOCKS). | 3 | |
| ATBL 1050 | INSERTION TWEEZER, 22 GAGE | 1 | |
| ATBL 1060 | INSERTION TWEEZER, 20 GAGE | 1 | |
| ATBL 1161 | INSERTION TOOL, 12 GAGE | 1 | |
| ATBL 2050-70 | REMOVAL TWEEZER, 22 GAGE | 1 | |
| ATBO 1071 | TWEEZER, INSERTION, (20 GAGE) | 1 | |
| ATBO 1072 | TWEEZER, INSERTION, (20 GAGE) | 1 | |
| ATBO 2072 | TWEEZER, REMOVAL (20 GAGE) | 1 | |
| ATBO 2160 | TWEEZER, REMOVAL (12 GAGE) | 1 | |
| ATBX 1-6782 | PLIER, INSERTION, 20 GAGE | 1 | |
| ATBX 1-7082 | PLIER, INSERTION, 12 GAGE | 1 | |
| ATBX 1-8107-20 | PLIER, INSERTION, 20 GAGE | 1 | |
| ATBX 1154 | INSERTION TOOL, 12 GAGE | 1 | |
| ATBX1073 | INSERTION TOOL 20 GAGE DEUTSCH ENGINE INSTALLATION PLUGS. | 3 | |
| ATC 2036 | REMOVAL TOOL, 22 GAGE | 1 | |
| ATC-3075 | RETENTION TEST TOOL 20 GAGE | 3 | |
| ATC-3077 | RETENTION TEST TOOL 12 GAGE | 3 | |
| ATD 1035-135 | INSERTION TOOL 22 GAGE DEUTSCH TSE 10 TO 22 SPLICE. | 1 | |
| ATD1035 | INSERTION TOOL 22 GAGE DEUTSCH TSE 10 TO 22 SPLICE. | 2 | |
| ATGH 1057 | TWEEZER, INSERTION, 22 GAGE | 1 | |
| ATGH 1075 | TWEEZER, INSERTION, 20 GAGE | 1 | |
| ATGH 2056 | TWEEZER, REMOVAL, 22 GAGE | 1 | |
| ATGH 2073 | TWEEZER, REMOVAL, 20 GAGE | 1 | |
| ATGH 2074 | TWEEZER, REMOVAL, 20 GAGE | 1 | |
| ATH 1052 | INSERTION TOOL, 22 GAGE | 1 | |
| ATK6000 | GAGE KIT (MS3196-2) | 1 | |
| ATR 2080S | TWEEZER, REMOVAL, 20 GAGE STRAIGHT | 1 | |
| ATR1080 | INSERTION TOOL 20 GAGE DEUTCSH TSE10-20 SPLICE. | 3 | |
| ATRD 5072 | INSERTION TOOL, TWEEZER, 20 GAGE | 1 | |
| ATRD 5153 | INSERTION TOOL, TWEEZER, 12 GAGE | 1 | |
| ATRD 6072 | TWEEZER,REMOVAL, 20 GAGE | 1 | |
| ATRD 6153 | REMOVAL TOOL, TWEEZER, 12 GAGE | 1 | |
| B27039-28 | RIGGING EQPT - GAGE (B27039-3 ASSY INCLUDED IN B27039-28 EQPT) | 9 | |
| BAR 0-6 | GAGE 0-6 TO 2C14711G01 | 1 | |
| C32004-6 | GAGE ASSY GRP 2 | 1 | |
| C32051-1 | SET, GAGE - HYDRAULIC BRAKE SYSTEM, PRESSURE CHECKING_WEIGHT : 75 LBS, DIMENSION : 16 X 27 X 28” | 8 | |
| CAFG-62-1-4050 | 2ND O.S. GO/NOGO GAGE | 1 | |
| CAFG-62-1-4075 | 2ND O.S. GO/NOGO GAGE | 1 | |
| CAG-62 | 2ND O.S. COMB GAGE | 1 | |
| CAI60412 | GAGE DIAL DEPTH 0-.125IN0-25-0 | 1 | |
| CAI60412J | GAGE DIAL DEP 0 .125IN 0 25 0 | 1 | |
| CAMG-62 | 2ND O.S. MANDREL GAGE | 1 | |
| CAR-40-1-.2495-CBD | GAGE FINISH REAMERS, REF: FTI, P/N: CAR-40-1-.2495 | 1 | |
| CASR-60-1 | 2ND O.S. GO/NOGO GAGE | 1 | |
| CBFG-40-.2495/.2505 | FINAL HOLE GAGES, REF: FTI, P/N: CBFG-40-.2495/.25 | 1 | |
| CBG-4-2-N-1 | GAGE, COMBINATION (SET 4-2-N) | 1 | |
| CBG-6-2-N-1 | COMBINATION GAGE 2DO OVZ | 4 | |
| CBG-8-2-N-1 | COMBINATION GAGE 2DO OVZ 1/4 | 2 | |
| CBMG-10-0-N | GAGE, MANDREL CHECK (0.2930) | 4 | |
| CBMG-12-3-N | MANDREL GAGE CBMG-12-3-N (0.4014INCH) | 3 | |
| CBMG-16-2-N-1 | MANDREL GAGE PER COLD WORKING DIAM 17/32" CLASSE I | 1 | |
| CBMG-6-2-N | GAGE, MANDREL CHECK (0.2064) | 4 | |
| CBMG-6-3-N | GAGE, MANDREL CHECK (0.2224) | 3 | |
| CBMG-8-0-N | GAGE, MANDREL CHECK (0.2294) | 5 | |
| CBMG-8-1-N | GAGE, MANDREL CHECK (0.2454) | 6 | |
| CBMG-8-2-N | GAGE, MANDREL CHECK (0.2611) | 4 | |
| CBMG-8-3-N | GAGE, MANDREL CHECK (0.2783) | 6 | |
| CBMG10-2N | GAGE, MANDREL CHECK (0.3213) | 2 | |
| CBMG6-3N | GAGE, MANDREL CHECK (0.22) | 3 | |
| CBMG8-0N | GAGE, MANDREL CHECK (0.22) | 5 | |
| CBMG8-1N | GAGE, MANDREL CHECK (0.24) | 6 | |
| CBR-6-1-N-1 | GAGE REAMER .2010/.1990 | 1 | |
| CBR-6-1-N-RA-.1995 | RIGHT ANGLE GAGE FINISH REAMER (0.199" - 0.201") | 1 | |
| CBR-6-2-N-1 | GAGE REAMER .2319/.2294 | 1 | |
| CBR-6-2-N-RA-.2150 | RIGHT ANGLE GAGE FINISH REAMER (0.215" - 0.216") | 1 | |
| CBR-6-3-N-1 | GAGE REAMER .2319/.2294 | 1 | |
| CBR-6-3-N-RA-.2305 | RIGHT ANGLE GAGE FINISH REAMER (0.230" - 0.232") | 1 | |
| CBR-8-0-N-1 | GAGE REAMER .2480/.2450 | 1 | |
| CBR-8-0-N-RA-.2465 | RIGHT ANGLE GAGE FINISH REAMER. (0.246" - 0.248") | 1 | |
| CBR-8-1-N-RA-.2620 | RIGHT ANGLE GAGE FINISH REAMER (0.261" - 0.263") | 1 | |
| CBR-8-2-N-RA-.2775 | RIGHT ANGLE GAGE FINISH REAMER (0.277" - 0.279") | 1 | |
| CBR-8-3-N-RA-.2930 | RIGHT ANGLE GAGE FINISH REAMER (0.290" - 0.293") | 1 | |
| CDI343206S | GAGE & DR, 250 IN LB. TTPM,ETT | 1 | |
| CGC-06X-3B | KATO TANGLESS GAGE WORKING 3B SIZE 6-32 REF. CGC-06X-3B | 1 | |
| CGF-3X-3B | KATO TANGLESS GAGE WORKING 3B SIZE 10-32 REF. CGF-3X-3B | 1 | |
| CGF-4X-3B | KATO TANGLESS GAGE WORKING 3B SIZE 1/4-28 REF. CGF-4X-3B | 1 | |
| CGF-5X-3B | KATO TANGLESS GAGE WORKING 3B SIZE 5/16-24 REF. CGF-5X-3B | 1 | |
| CGF-6X-3B | KATO TANGLESS GAGE WORKING 3B SIZE 3/8 -24 REF. CGF-6X-3B | 1 | |
| CGF-7X-3B | KATO TANGLESS GAGE WORKING 3B SIZE 7/16-20 | 1 | |
| CGF-8X-3B | KATO TANGLESS GAGE WORKING 3B SIZE 1/2 -20 | 1 | |
| D-4000 | FEDERAL DIMENSION AIR GAGE ( WITH SETTING RING ADN AIR PLUG) OR EQUIVALENT 1.1268 SETTING RING 1.1268 AIR PLUG | 1 | |
| D12-9892-12 | INSPECTION GAGE 12 | 3 | |
| D12-9892-20 | INSPECTION GAGE 20 | 2 | |
| D12-9892-24 | INSPECTION GAGE 24 | 1 | |
| D7910 | OLYMPUS 27MG DIGITAL ULTRASONIC THICKNESS GAGE | 1 | |
| DAK95-22B | TOOL-INSTALLING-GAGE 22 | 3 | |
| DAK95-22MB | TOOL-INSTALLING,GAGE 22 | 3 | |
| DBS-2102 | Hand Operated .250 Wide One-Step Band Application Tool M81306/1A with Gage and Tension Key | 2 | |
| DBS-2202 | Hand Operated .125 Wide One-Step Mini-Band Application Tool M81306/1B with Gage and Tension Key | 2 | |
| DBS-CG2A | M81306/2-01E Verification Set which includes DBS-CG2 and G691 Gage | 2 | |
| DBS-CG3A | M81306/2-02F Verification Set which includes DBS-CG3 and G752 Gage | 2 | |
| DBS-CG7 | VERIFICATION INSPECTION GAGE FOR DBS-2100 | 3 | |
| DBS-CG8 | VERIFICATION INSPECTION GAGE FOR DBS-2200 | 3 | |
| DEM18 | DEPTH GAGE_(0 ~ 20) INCH, 0.001 INCH_[DEM18] | 1 | |
| DFX-DFPG213 | PEFCT GAP PANEL GAGE 2 EACH | 1 | |
| DG-200 | PUSH-PULL GAGE (200 LB.) | 11 | |
| DGD-2 | Gage - Gram, 2.5-15 Gram Force, +/-2% | 1 | |
| DIN-7280 | 124127999 WET FILM GAGE | 1 | |
| DMC1550 | WA23 Tool Kit & Mil-Spec Locators, Die Assemblies & Gages | 2 | |
| DMC1663A | WA23 Tool Kit with all Mil-Spec Die Assemblies, Locators & Gages | 2 | |
| DMC2265 | HD23 with All MIL SPEC Dies/Locators/Gages | 2 | |
| DPG-102 | DIGITAL PRESSURE GAGE 0-15 PSI; 0.25 | 2 | |
| DPP-50 | FORCE GAGE, PUSH/PULL GAGE 0-50LB (FUNDO DE ESCALA 0,2) | 6 | |
| DPP-500G | DIAL P/P GAGE_26.5X13X7.5CM,0~500GRAMS_[DPP-500G] | 1 | |
| DPPH-100 | GAGE - DIAL PUSH/PULL MODEL DPPH-100 (PART # DPPH-100, SUPPLIER 92456)(S-54-062-03-01, S-54-062-03-02, S-54-062-03-03, S-54-062-03-04) | 2 | |
| DPPH-200 | GAGE, FORCE 0~200 LBS, PUSH-PULL_0~200LBSFORCEGAGE_[DPPH-200] | 1 | |
| DRK95-22MA | TOOL-REMOVAL,GAGE 22 | 3 | |
| DRK95-22MB | TOOL-REMOVAL,GAGE 22 | 3 | |
| E1440 | DIAL GAGE 2.5" 0-160 PSI CENTRAL CONNECTION 1/4NPT | 1 | |
| EXT023 | GO NO GO GAGE BRAKE ATR 42-500 | 1 | |
| F28276000 | ADJUSTMENT TOOL WITH SETTING SHIMS (GS48354 GS48363) AND GAGE T47948 - NLG A320NEO | 1 | |
| F70200-18 | STRUT INFLATION TOOL, GAGE (S/S BY F70200-35) | 21 | |
| F70284-1 | SPL-1625 Wear Gage Set - Ground Power Plug and Receptacle 737-600, -700, -800 | 28 | |
| F72977-47 | Gage Equipment -Hydraulic Brake System Pressure Checking (Repl. By C32051) | 5 | |
| F72977-62 | Gage Equipment -Hydraulic Brake System Pressure Checking (Repl. By C32051) | 16 | |
| FB-325A | FEELER GAGE_0.0015"~0.025"_[FB-325A] | 8 | |
| FB-335 | GAGE,THICKNESS:STRAIGHT,3.312" BLADE LG | 6 | |
| FB322 | FEELER GAGE (0.004" A 0.027") | 2 | |
| FB325A | FEELER GAGE_0.0015"~0.025"_[FB-325A] | 8 | |
| FB326B | 26 FLR/IGN GAGE (.008-.035") | 1 | |
| FB3355 | GAGE,THICKNESS:STRAIGHT,3.312" BLADE LG | 1 | |
| FBM320 | FEELER GAGE - NUMBER OF BLADES: 20 BLADES SIZE: 0.05 - 1MM INCREMENT:0.05MM | 3 | |
| FDIX100 | PUSH PULL GAGE(FORCE GAGE)_100 X 9.1 LBF, ACC 0.2%_[FDIX100] | 6 | |
| FLAP PEENING KIT | ROTARY FLAP KIT WITH #2 ALMEN GAGE | 1 | |
| FSG-1501-35110A | FORCEMATE STARTING HOLE GAGE, 1ST OVERSIZE (CLASS 2) | 1 | |
| FTE-03-35-15000 | FLAP SETTING GAGE STA.2900 | 1 | |
| FTE-04-35-34000 | RUDDER SETTING GAGE STA.1362.5 | 1 | |
| FTMG-483-A-0 | GAGE, MANDREL CHECK (0.2471) | 1 | |
| G100 | Gage - GO .0200 - NO-GO .0220 | 2 | |
| G1003 | Gage - GO .0520 - NO-GO .0570 for M309 | 2 | |
| G1014 | Gage - GO .0820 - NO-GO .0880 | 2 | |
| G1047 | Gage- GO .1190 – NO-GO .1250 | 2 | |
| G1122 | GAGE, GO/NO-GO M22520/39-03 GMT1090 | 2 | |
| G1151 | GAGE GO.1220 - NO-GO.1300- Use w/ HD51-115N & -119N | 2 | |
| G1152 | GAGE- GO.1270 - NO-GO.1350- Use w/ HD51-116N & -120N | 2 | |
| G1153 | GAGE- GO.1860 - NO-GO.1940- Use w/ HD51-117N & -121N | 2 | |
| G1154 | GAGE GO.2710 - NO-GO.2790 - Use w/ HD51-122N & -123N | 2 | |
| G1155 | Gage - GO .3160 - NO-GO .3240 - Use w/ HD51-124N & -125N | 2 | |
| G120 | Gage - GO .0960 - NO-GO .1000 - M22520/3-2 | 2 | |
| G125 | Gage - GO .0390 - NO-GO .0440 - M22520/3-1 | 10 | |
| G1261 | Gage - GO/NO-GO for Y832 Cavity "B" | 2 | |
| G1263 | Gage GO 0.042 - NO-GO 0.058 | 2 | |
| G140 | Gage - GO .1420 - NO-GO .1460 | 2 | |
| G145 | Gage - GO .0410 - NO-GO.0460 - M22520/3-3 | 2 | |
| G150 | Gage - GO .1015 - NO-GO .1085 - M22520/6-001 | 2 | |
| G155 | Gage - GO .1245 - NO-GO .1315 - M22520/6-003 | 2 | |
| G160 | Gage - GO .0645 - NO-GO .0715 - M22520/6-029 | 2 | |
| G165 | Gage - GO .4255 - NO-GO.4325 - M22520/6-022 | 2 | |
| G170 | Gage - GO .2515 - NO-GO.2585 - M22520/6-011 | 2 | |
| G175 | Gage - GO .3395 - NO-GO .3465 - M22520/6-018 | 2 | |
| G180 | Gage - GO .2095 - NO-GO .2165 - M22520/6-008 | 2 | |
| G185 | Gage - GO .1745 - NO-GO .1815 - M22520/6-006 | 2 | |
| G186 | Gage - GO .1145 - NO-GO .1215 - M22520/6-002 | 2 | |
| G187 | Gage - GO .1475 - NO-GO .1545 - M22520/6-004 | 2 | |
| G188 | Gage - GO .1565 - NO-GO .1635 - M22520/6-005 | 2 | |
| G189 | Gage - GO .1935 - NO-GO .2005 - M22520/6-007 | 2 | |
| G190 | Gage - GO .2145 - NO-GO .2215 - M22520/6-009 | 2 | |
| G191 | Gage - GO .2275 - NO-GO .2345 - M22520/6-010 | 2 | |
| G192 | Gage - GO .2595 - NO-GO .2665 - M22520/6-012 | 2 | |
| G193 | Gage - GO .2645 - NO-GO .2715 - M22520/6-013 | 2 | |
| G194 | Gage - GO .2865 - NO-GO .2935 - M22520/6-014 | 2 | |
| G195 | Gage - GO .3055 - NO-GO .3125 - M22520/6-015 | 2 | |
| G196 | Gage - GO .3105 - NO-GO .3175 - M22520/6-016 | 2 | |
| G197 | Gage - GO .3205 - NO-GO .3275 - M22520/6-017 | 2 | |
| G198 | Gage - GO .3555 - NO-GO .3625 - M22520/6-019 | 2 | |
| G199 | Gage - GO .3805 - NO-GO .3875 - M22520/6-020 | 2 | |
| G200 | Gage - GO .3975 - NO-GO .4045 - M22520/6-021 | 2 | |
| G201 | Gage - GO .4275 - NO-GO .4345 - M22520/6-023 | 2 | |
| G202 | Gage - GO .4505 - NO-GO .4575 - M22520/6-024 | 2 | |
| G203 | Gage - GO .4715 - NO-GO .4785 - M22520/6-025 | 2 | |
| G204 | Gage - GO .4975 - NO-GO .5045 - M22520/6-026 | 2 | |
| G205 | Gage - GO .5285 - NO-GO .5355 - M22520/6-027 | 2 | |
| G206 | Gage - GO .1345 - NO-GO .1415 - M22520/6-028 | 2 | |
| G207 | Gage - GO .0875 - NO-GO .0945 - M22520/6-030 | 2 | |
| G208 | Gage - GO .0965 - NO-GO .1035 - M22520/6-031 | 2 | |
| G214 | Gage - GO .0160 - NO-GO .0210 | 2 | |
| G215 | Gage - GO .0190 - NO-GO .0240 | 2 | |
| G216 | Gage - GO .0220 - NO-GO .0270 | 2 | |
| G217 | Gage - GO .0260 - NO-GO .0310 | 2 | |
| G220 | Gage - GO .0280 - NO-GO .0330 | 2 | |
| G221 | Gage - GO .0320 - NO-GO .0370 | 2 | |
| G225 | Gage - GO .0520 - NO-GO .0570 | 2 | |
| G228 | Gage - GO .0160 - NO-GO .0210 | 2 | |
| G229 | Gage - GO .0190 - NO-GO .0240 | 2 | |
| G230 | Gage - GO .0220 - NO-GO .0270 | 2 | |
| G231 | Gage - GO .0250 - NO-GO .0300 | 2 | |
| G232 | Gage - GO .0290 - NO-GO .0340 | 2 | |
| G234 | Gage - GO .0370 - NO-GO .0420 | 2 | |
| G250 | Gage - GO .0230 - NO-GO .0250 | 2 | |
| G251 | Gage - GO .0270 - NO-GO .0290 | 2 | |
| G254 | Gage - GO .0400 - NO-GO .0420 | 2 | |
| G255 | Gage - GO .1025 - NO-GO .1065 | 2 | |
| G256 | Gage - GO .0640 - NO-GO .0670 - M22520/3-4 | 2 | |
| G257 | Gage - GO .0890 - NO-GO .0920 - M22520/3-5 | 2 | |
| G258 | Gage - GO .0740 - NO-GO .0770 - M22520/3-6 | 2 | |
| G259 | Gage - GO .1480 - NO-GO .1510 - M22520/3-7 | 2 | |
| G260 | Gage - GO .1210 - NO-GO .1240 - M22520/3-8 | 2 | |
| G261 | Gage - GO .1320 - NO-GO .1400 - M22520/3-9 | 2 | |
| G262 | Gage - GO .0960 - NO-GO .1040 - M22520/3-10 | 2 | |
| G263 | Gage - GO .0660 - NO-GO .0740 - M22520/3-11 | 2 | |
| G264 | Gage - GO .0640 - NO-GO .0720 - M22520/3-12 | 2 | |
| G265 | Gage - GO .0430 - NO-GO .0510 - M22520/3-13 | 2 | |
| G266 | Gage - GO .0250 - NO-GO .0330 - M22520/3-14 | 2 | |
| G268 | Gage - GO .0240 - NO-GO .0290 | 2 | |
| G269 | Gage - GO .2775 - NO-GO .2825 | 2 | |
| G270 | Gage - GO .0285 - NO-GO .0335 | 2 | |
| G275 | Gage - GO .1255 - NO-GO .1305 with Flats | 2 | |
| G276 | Gage - GO .1025 - NO-GO .1075 | 2 | |
| G278 | Gage - GO .1220 - NO-GO .1280 | 2 | |
| G281 | Gage - GO .3098 - NO-GO .3140 - MS23003-2 | 2 | |
| G282 | Gage - GO .4358 - NO-GO .4400 - MS23003-03 | 2 | |
| G287 | Gage - GO .1245 - NO-GO .1315 | 2 | |
| G290 | Gage - GO .0975 - NO-GO .1025 | 2 | |
| G293 | Gage - GO .2525 - NO-GO .2575 | 2 | |
| G315 | Gage - GO .0260 - NO-GO .0300 | 2 | |
| G316 | Gage - GO .0180 - NO-GO .0220 | 2 | |
| G32004-5 | GAGE EQPT - TRUNNION & DRAG LINK FITTING INSTL, NLG (G32004-6 INCLUDED IN G32004-5 KIT) | 6 | |
| G324 | Gage - GO .2535 - NO-GO .2605 | 2 | |
| G325 | Gage - GO .2165 - NO-GO .2235 | 2 | |
| G331 | Gage - GO .1230 - NO-GO .1370 | 2 | |
| G333 | Gage - GO .1900 - NO-GO .2040 | 2 | |
| G335 | Gage - GO .1540 - NO-GO .1620 | 2 | |
| G345 | Gage - M22520/35 | 2 | |
| G348 | Gage - GO .1175 - NO-GO .1265 | 2 | |
| G353 | Gage - GO .1130 - NO-GO .1210 | 2 | |
| G390 | Gage - GO .1985 - NO-GO .2055 | 2 | |
| G395 | Gage - GO .0920 - NO-GO .1020 | 3 | |
| G397 | Gage - GO .1180 - NO-GO .1280 | 2 | |
| G408 | Gage - GO .1170 - NO-GO .1229 | 2 | |
| G411 | GAGE 3 STEP M22520/3 | 6 | |
| G418 | Gage - GO .0920 - NO-GO .0960 | 2 | |
| G419 | Gage - GO .1250 - NO-GO .1290 | 2 | |
| G427 | Gage - GO .0320 - NO-GO .0370 | 2 | |
| G4308 | GAGE, PRESSURE, DIAL INDICATING:0-2000 PSI | 1 | |
| G432 | Gage - GO .2720 - NO-GO .2840 | 2 | |
| G433 | Gage - GO .2400 - NO-GO .2520 | 2 | |
| G435 | Gage GO .2780 - NO-GO .2820 | 1 | |
| G438 | Gage - GO .0280 - NO-GO .0330 | 2 | |
| G443 | Gage - GO .1420 - NO-GO .1460 - M22520/3-15 | 2 | |
| G465 | Gage - GO .2160 - NO-GO .2200 | 2 | |
| G467 | Gage - GO .2580 - NO-GO .2620 | 2 | |
| G468 | Gage - GO .2045 - NO-GO .2115 | 2 | |
| G485 | Gage - GO .3725 - NO-GO .3775 | 2 | |
| G486 | Gage - GO .4125 - NO-GO .4175 | 2 | |
| G491 | Gage - GO .2765 - NO-GO .2835 | 2 | |
| G513 | Gage - GO .0190 - NO-GO .0240 | 2 | |
| G533 | Gage - GO .1970 - NO-GO .2010 | 2 | |
| G537 | Gage - GO .2095 - NO-GO .2135 with Flats | 2 | |
| G538 | Gage - GO .0470 - NO-GO .0520 | 2 | |
| G541 | Gage - GO .0270 - NO-GO .0320 | 2 | |
| G542 | Gage - GO .0230 - NO-GO .0280 | 2 | |
| G594 | Gage - GO .1181 - NO-GO .1200 | 2 | |
| G598 | Gage - GO .0200 - NO-GO .0240 | 2 | |
| G616 | Gage - GO .1375 - NO-GO .1425 | 2 | |
| G624 | Gage - GO .1910 - NO-GO .2010 | 3 | |
| G625 | Gage - GO .2160 - NO-GO .2220 | 2 | |
| G648 | Gage - GO .0520 - NO-GO .0580 | 2 | |
| G649 | Gage - GO .4125 - NO-GO .4175 | 2 | |
| G669 | Gage - GO .2370 - NO-GO .2430 | 2 | |
| G683 | Gage - GO .1980 - NO-GO .2060 | 2 | |
| G684 | Gage - GO .2500 - NO-GO .2580 | 2 | |
| G688 | Gage - GO .0825 - NO-GO .0875 | 2 | |
| G691 | Gage - GO .1230 - NO-GO .1270 | 2 | |
| G695 | Gage - GO .1950 - NO-GO .2020 | 2 | |
| G696 | Gage - GO .3250 - NO-GO .3320 | 2 | |
| G698 | Gage - GO .4250 - NO-GO .4320 | 2 | |
| G700-523103-1 | Internal Baggage Door Lock (Pre Sb700-52-034/Sb700-1A11-52-011) | 2 | |
| G700-523103-15 | Internal Baggage Door Lock (Post Sb700-52-034/Sb700-1A11-52-011) | 2 | |
| G701 | Gage - GO .0440 - NO-GO .0510 - MS3196-20 | 2 | |
| G704 | Gage - GO .2150 - NO-GO .2190 with Flats | 2 | |
| G713 | Gage - Stepped GO/NO-GO - M22520/39-02 | 2 | |
| G719 | Gage - GO .1230 - NO-GO .1290 | 2 | |
| G720 | Gage - GO .2078 - NO-GO .2120 -MS90486-8 | 2 | |
| G721 | Gage - GO .2378 - NO-GO .2420 - MS90486-6 | 2 | |
| G722 | Gage - GO .2968 - NO-GO .3010 - MS90486-4 | 2 | |
| G723 | Gage - GO .1678 - NO-GO .1720 - MS23003-8 | 2 | |
| G724 | Gage - GO .1998 - NO-GO .2040 -MS23003-6 | 2 | |
| G725 | Gage - GO .2518 - NO-GO .2560 - MS23003-4 | 2 | |
| G726 | Gage - GO .3368 - NO-GO .3410 - MS23003-1 | 2 | |
| G727 | Gage - GO .3678 - NO-GO .3720 -MS23003-01 | 2 | |
| G728 | Gage - GO .4018 - NO-GO .4060 - MS23003-02 | 2 | |
| G729 | Gage - GO .4708 - NO-GO .4750 - MS23003-04 | 2 | |
| G739 | Gage - GO .0460 - NO-GO .0520 | 2 | |
| G741 | Gage - GO .0760 - NO-GO .0820 | 2 | |
| G743 | Gage - GO .0990 - NO-GO.1120 | 3 | |
| G745 | Gage - GO .1720 - NO-GO .1800 | 2 | |
| G746 | Gage - GO .2020 - NO-GO .2100 | 2 | |
| G747 | Gage - GO .2610 - NO-GO .2690 | 9 | |
| G749 | Gage - GO .2710 - NO-GO .2790 | 2 | |
| G752 | Gage - GO .1110 - NO-GO .1270 - M81306/2-02F | 2 | |
| G756 | Gage - GO .2860 - NO-GO .2940 | 2 | |
| G759 | Gage - GO .2465 - NO-GO .2535 | 2 | |
| G760 | Gage - GO .0250 - NO-GO .0270 | 2 | |
| G768 | Gage - GO .1190 - NO-GO .1250 | 2 | |
| G771 | Gage - GO .1180 - NO-GO .1240 | 2 | |
| G786 | Gage - GO .1960 - NO-GO .2020 | 2 | |
| G788 | Gage - GO .2150 - NO-GO .2210 | 2 | |
| G791 | Gage - GO .2395 - NO-GO .2445 | 2 | |
| G792 | Gage - GO .1920 - NO-GO .1940 | 2 | |
| G806 | Gage - GO .1270 - NO-GO .1370 | 2 | |
| G808 | Gage - GO .1455 - NO-GO .1525 | 2 | |
| G820 | Gage - GO .1120 - NO-GO .1200 | 2 | |
| G828 | Gage - GO .4220 - NO-GO .4260 | 2 | |
| G833 | Gage - GO .3748 - NO-GO .3790 - MS90486-2 | 2 | |
| G836 | Gage - GO .4978 - NO-GO .5020 - MS90486-02 | 2 | |
| G838 | Gage - GO .6158 - NO-GO .6200 - MS90486-04 | 2 | |
| G864 | Gage - GO .0190 - NO-GO .0220 | 2 | |
| G867 | Gage - GO .2495 - NO-GO .2565 | 2 | |
| G871 | Gage - GO .0240 - NO-GO .0270 | 2 | |
| G872 | Gage - GO .2370 - NO-GO .2410 | 2 | |
| G874 | Gage - GO .0425 - NO-GO .0445 | 2 | |
| G879 | Gage - GO .0265 - NO-GO .0305 | 2 | |
| G886 | Gage - GO .0740 - NO-GO .0820 for DCT4-105 | 2 | |
| G917 | Gage - GO .1240 - NO-GO .1280 | 2 | |
| G924 | Gage - GO .0270 - NO-GO .0290 | 2 | |
| G925 | Gage - GO .0420 - NO-GO .0460 | 2 | |
| G928 | Gage - GO .1170 - NO-GO .1210 with Flats | 2 | |
| G929 | Gage - GO .2320 - NO-GO .2440 | 2 | |
| G930 | Gage - GO .2640 - NO-GO .2760 | 2 | |
| G931 | Gage GO 0.1260/0.0900/0.0760 - NO-GO 0.1380/0.1020/0.0880 | 2 | |
| G933 | Gage - GO .2065 - NO-GO .2135 | 2 | |
| G942 | Gage - GO .2565 - NO-GO .2635 | 2 | |
| G946 | Gage - GO .2085 - NO-GO .2155 | 2 | |
| G958 | Gage - GO .2260 - NO-GO .2280 | 2 | |
| G960 | Gage - GO .3540 - NO-GO .3620 | 2 | |
| G961 | Gage - GO .3210 - NO-GO .3290 | 2 | |
| G966 | Gage - GO .2580 - NO-GO .2680 | 2 | |
| G967 | Gage - GO .3100 - NO-GO.3200 | 2 | |
| G985 | Gage - GO .0920 - NO-GO .1120 | 2 | |
| G987 | Gage - GO .0120 - NO-GO .0140 | 2 | |
| G995 | Gage - GO .0655 - NO-GO .0725 | 2 | |
| G996 | Gage - GO .2200 - NO-GO .2300 | 2 | |
| G997 | Gage - GO .1525 - NO-GO .1595 | 2 | |
| GA47567-140-A | GAGE,PRESSURE,DIAL INDICATING,(0-25BAR) | 1 | |
| GAGE PIN, 0.562 INCH DIAMETER | GAGE PIN, 0.562 INCH DIAMETER | 1 | |
| GAGE PIN, 1/2 INCH DIAMETER | GAGE PIN, 1/2 INCH DIAMETER | 1 | |
| GAGE-829A | GAGE 829A - STARETT HOLE | 1 | |
| GAGE-829B | GAGE 829B - STARETT HOLE | 1 | |
| GA_*200PSI-CL0.5 | PRESSURE GAGE 200 PSI CL-0.5 | 1 | |
| GB751204 | 751204, GAGE BILT TOOL PART, ADAPTER ASSEMBLY | 2 | |
| GD-25 | FORCE GAGE DYNAMOMETER 30-250 GRAM | 13 | |
| GGG-G-17 | GAGE SET,TELESCOPIN NSN: 5210004739350 | 1 | |
| GR-254527 / GR-255327 | JT8D-200 ENG GO,NO-GO GAGE | 1 | |
| GS10-752B-20 | GB713-NOSE ASSEMBLY ACCESSORIES (MFG : GAGEBILT DIA : 10/32 TYPE : STRAIGHT) | 1 | |
| GS8-752C-20 | GB713-NOSE ASSEMBLY ACCESSORIES (MFG : GAGEBILT DIA : 8/32 TYPE : STRAIGHT ) | 1 | |
| GSB5231001 | TEST FIXTURE P/N: GSB5231001 TO BE USED IN TESTING JXH AFT BAGGAGE DOOR GAS SPRINGS INTEGRITY. | 1 | |
| GSE5101092 | BALL GAGES-GSE5101092 | 1 | |
| GSE5120516 | PUSH-PULL GAGE 0-200 POUNDS-GSE5120516 | 1 | |
| H-2016-01 | GAGE 20 BAR (290 PSI) - PRESSURE, TIRE | 6 | |
| H2636 | GAGE - TIRE PRESSURE, 0-300 PSIG (0-2069 KPA), STD-1132 | 3 | |
| HA1601-005 | ADAPTER WITH GAGE 0-25BAR, INFLATION OF PRESSURE | 1 | |
| HC-2144 | GAGE,DIFFERENTIAL,DIAL INDICATING;|SYSTEM PRESSURE GAUGE;HYDRULIC POWER UNIT (MODEL 5241) FOR TESTING HELLI 429 | 5 | |
| HD120 | 12 Ton Large Gage Hydraulic Crimp Tool | 2 | |
| HG177-2 | PIN PROTUSION GAGE 5/32"DIA | 1 | |
| HG177-3A | PIN PROTUSION GAGE 7/32"DIA | 1 | |
| HG77-13A | PIN/COLLAR GAGE (FOR PINS 0.250 IN DIAMETER AND COLLARS, NAS1080C08) | 1 | |
| HU20604 | GAGE, POSITION OF I.D.G. COOLER TO L.P. COMPRESSOR FAN CASE RB211 | 1 | |
| HU24461 | GAGE - THREAD (0.1900 IN - 32 THD/IN) | 3 | |
| HU24462 | GAGE - THREAD (0.2500 IN - 28 THD/IN) | 3 | |
| HU24463 | GAGE - THREAD (0.3125 IN - 24 THD/IN) | 3 | |
| HU24464 | GAGE - THREAD (0.3750 IN - 24 THD/IN) | 3 | |
| HU24465 | GAGE - THREAD (0.4375 IN - 20 THD/IN) | 3 | |
| HU24466 | GAGE - THREAD (0.5000 IN - 20 THD/IN) | 3 | |
| HU24467 | GAGE - THREAD (0.5625 IN - 18 THD/IN) | 3 | |
| HU24468 | GAGE - THREAD (0.6250 IN - 18 THD/IN) | 3 | |
| IAE 1P16092 | IAE 1P16092 IGNITER IMMERSION GAGE | 14 | |
| IAE 2F10418 | IAE 2F10418 LENGTH GAGE | 1 | |
| IAE1J12356 | IAE 1J12356 SETTING GAGE | 1 | |
| IAE1P17515 | GAGELHT Dwg No.(537250057) | 1 | |
| IAE1R18271 | IAE 1R18271 AIR PLUG GAGE | 1 | |
| IAE2J13314 | EROSION MEASURING GAGE (0-240MM) | 1 | |
| IAE2M14186 | GAGE, INSPECTIONLHT Dwg No.(537200037) | 3 | |
| IAE2M14187 | GAGE, INSPECTIONLHT DWG NO.(537200038) | 3 | |
| IAE2P16207 | STAGES 1 & 2 HPT BLADE LENGTH OPTICAL GAGE | 1 | |
| J27034-26 | .002 thickness gage | 1 | |
| J27034-28 | .020 thickness gage | 1 | |
| J27081-1 | GAGE - GO/NO GO (J27081-6 ASSY INCLUDED IN J27081-1 RIGGING EQUIPMENT - OUTBOARD TRAILING EDGE FLAPS) USED ON 777-200LR, -300ER AND 777F AIRPLANES. | 7 | |
| J52041-1 | GAGE - GO/NO-GO_[J52041-1] | 5 | |
| KB2G-100-XXXX-0 | KB2 Combo Gages | 1 | |
| KB2G-101-XXXX-0 | KB2 Combo Gages | 1 | |
| KB2G-102-XXXX-0 | KB2 Combo Gages | 1 | |
| KB2G-103-XXXX-0 | KB2 Combo Gages | 1 | |
| KB2G-120-XXXX-0 | KB2 Combo Gages | 1 | |
| KB2G-121-XXXX-0 | KB2 Combo Gages | 1 | |
| KB2G-122-XXXX-0 | KB2 Combo Gages | 1 | |
| KB2G-123-XXXX-0 | KB2 Combo Gages | 1 | |
| KB2G-40-XXXX-0 | KB2 Combo Gages | 1 | |
| KB2G-41-XXXX-0 | KB2 Combo Gages | 1 | |
| KB2G-42-XXXX-0 | KB2 Combo Gages | 1 | |
| KB2G-43-XXXX-0 | KB2 Combo Gages | 1 | |
| KB2G-60-XXXX-0 | KB2 Combo Gages | 1 | |
| KB2G-61-XXXX-0 | KB2 Combo Gages | 1 | |
| KB2G-62-XXXX-0 | KB2 Combo Gages | 1 | |
| KB2G-63-XXXX-0 | KB2 Combo Gages | 1 | |
| KB2G-80-XXXX-0 | KB2 Combo Gages | 1 | |
| KB2G-81-XXXX-0 | KB2 Combo Gages | 1 | |
| KB2G-82-XXXX-0 | KB2 Combo Gages | 1 | |
| KB2G-83-XXXX-0 | KB2 Combo Gages | 1 | |
| KB2MG-100-XXXX-0 | KB2 Mandrel Gages | 1 | |
| KB2MG-101-XXXX-0 | KB2 Mandrel Gages | 1 | |
| KB2MG-102-XXXX-0 | KB2 Mandrel Gages | 1 | |
| KB2MG-103-XXXX-0 | KB2 Mandrel Gages | 1 | |
| KB2MG-120-XXXX-0 | KB2 Mandrel Gages | 1 | |
| KB2MG-121--XXXX-0 | KB2 Mandrel Gages | 1 | |
| KB2MG-122-XXXX-0 | KB2 Mandrel Gages | 1 | |
| KB2MG-123-XXXX-0 | KB2 Mandrel Gages | 1 | |
| KB2MG-40-XXXX-0 | KB2 Mandrel Gages | 1 | |
| KB2MG-41-XXXX-0 | KB2 Mandrel Gages | 1 | |
| KB2MG-42-XXXX-0 | KB2 Mandrel Gages | 1 | |
| KB2MG-43-XXXX-0 | KB2 Mandrel Gages | 1 | |
| KB2MG-60-XXXX-0 | KB2 Mandrel Gages | 1 | |
| KB2MG-61-XXXX-0 | KB2 Mandrel Gages | 1 | |
| KB2MG-62-XXXX-0 | KB2 Mandrel Gages | 1 | |
| KB2MG-63-XXXX-0 | KB2 Mandrel Gages | 1 | |
| KB2MG-80-XXXX-0 | KB2 Mandrel Gages | 1 | |
| KB2MG-81-XXXX-0 | KB2 Mandrel Gages | 1 | |
| KB2MG-82-XXXX-0 | KB2 Mandrel Gages | 1 | |
| KB2MG-83-XXXX-0 | KB2 Mandrel Gages | 1 | |
| LG-100 | GAGE - DIAL PUSH/PULL MODEL DPPH-100(S-32-021-01-01) | 10 | |
| LST12260 | ELECT DEPTH GAGE 3753A-12/300 | 1 | |
| LST12457 | DIAL BORE GAGE 1.4-2.4IN | 1 | |
| LST12458 | DIAL BORE GAGE 2-6IN | 1 | |
| LST24483-0 | BORE GAGE HEAD .160-.200 | 1 | |
| LST50150 | DRILLPOINTGAGE59DEGBEVEL 32NDS | 1 | |
| LST50201 | SCRATCH GAGE 29B | 1 | |
| LST50677 | JOBBERS' DRILL GAGE 1/16-1/2" | 1 | |
| LST50927 | TELESCOPING GAGES 229E | 1 | |
| LST51296 | RADIUS GAGE 1/32IN 17 64IN | 1 | |
| LST51298 | RADIUS GAGE 9/32IN 33 64IN | 1 | |
| LST51318 | USSTANDARDGAGE#0-36(.3125-.007 | 1 | |
| LST52610 | GAGE TELESCOPING 5/16 - 1/2 | 1 | |
| LST52611 | GAGE, TELESCOPING 1/2 - 3/4 | 1 | |
| LST52613 | TELESCOPING GAGE 1-1/4-2-1/8" | 1 | |
| LST52614 | GAGE, TELESCOPING 2-1/8-3-1/2 | 1 | |
| LST52615 | GAGE TELESCOPING 3 1/2 - 6 | 1 | |
| LST53081 | HOLE GAGE 0.125IN-0.500IN 5PC | 1 | |
| LST55249 | WOOD CASE FOR 12" (300MM)GAGES | 1 | |
| LST67482 | PIN GAGE SET .061-.250 | 1 | |
| LST67484 | PIN GAGE SET .251-.500 | 1 | |
| LST67485 | GAGE PIN SET .251-.500 | 1 | |
| LST67675 | 2" MECHANICAL BORE GAGE | 1 | |
| LST67676 | BORE GAGE 2-2 5/8 | 1 | |
| LST67677 | BORE GAGE 2 5/8 - 3 1/4 | 1 | |
| LST68132 | BORE GAGE 1/2 - 5/8 | 1 | |
| LTCT14679 | 62. GAGE PLUG SPLINE | 1 | |
| M22520-3-2 | Military Specification M225203-2 Gage, Crimping Tool | 1 | |
| M22520/3-1 | G125 INSPECTION GAGE | 10 | |
| M22520/3-10 | GAGE G262 FOR X511 | 1 | |
| M22520/3-13 | GAGE G265 FOR Y540 & X528 | 1 | |
| M22520/3-14 | GAGE G266 FOR Y540 & X528 | 1 | |
| M22520/39-01 | GAGE GO .025/.0420/.0620 - NO-GO .035/.0520/.0720 | 1 | |
| M22520/6-003 | GAGE G155 FOR Y215 | 1 | |
| M22520/6-008 | GAGE G180 FOR Y197 Y205 Y680 | 1 | |
| M22520/6-010 | GAGE G191 FOR Y143/Y212 | 1 | |
| M22520/6-029 | GAGE G160 FOR Y679 Y205 | 1 | |
| M22520/6-031 | GAGE G208 FOR Y635 Y680 | 1 | |
| M70 | PRESSURE GAGE 20 BAR / 290 PSI | 1 | |
| M81969-8-01 | TOOL-INSTALLING,GAGE 22 | 7 | |
| M81969-8-02 | TOOL-REMOVAL,GAGE 22 | 4 | |
| M81969-8-03 | TOOL-INSTALLING-GAGE 22 | 2 | |
| M81969-8-04 | TOOL-REMOVAL,GAGE 22 | 1 | |
| MDL24 | BORE GAGE_I.D13/4~3.0"RANGE_[MDL24] | 1 | |
| MODEL 966A1 | OPTICAL MICROMETER GAGES OR WIRES - 0.004 TO 0.020 INCHES | 4 | |
| MS27495A20 | INSERTION TOOL 20GAGE | 2 | |
| MT0000246 | BORE GAGE 160-250/0.001MM 511-725 | 1 | |
| MT352-1 | MAIN ROTOR BLADE TRIM TAB GAGE (INCLUDES MT200-1 DIAL INDICATOR) | 2 | |
| MTI516-126 | GAGE BLOCK_[MTI516-126] | 1 | |
| MTS-0170 | CYLINDER GAGE 1.4"-2.4" | 1 | |
| NB200-001 | GAGE - (0-200PSI) | 1 | |
| NB4504-D | GAGE - PRESSURE, TIRE 2 X INLINE ADAPTERS FOR SMALL 8V & LARGE 12V SIZE VALVES | 1 | |
| NRK-3AST | Gage Set NSN 5280-01-352-1336(KIT INCLUDES AL, ST, AND TI STDS) *DO NOT USE THIS PART NUMBER, OURS IS RSN-3AST | 1 | |
| P29TF65 | VISUAL COMPARISON GAGE-SIDE 2 | 1 | |
| P5 | P1 TAPE GAGE_90X90X25MM,0.5KG_[P5] | 3 | |
| PA30-130 | ENGINE COVERS W/ NACELLE BAGGAGE DOOR MOD (set of 2) | 1 | |
| PA30-135 | INSULATED ENGINE COVERS W/ NACELLE BAGGAGE DOOR MOD (set of 2) | 1 | |
| PIN GAGE | .251-.500 PLUS PIN GAGE SET | 1 | |
| PIN GAGE 0.61-.250 | .061 TO .250 190PC SPI PIN GAGE SETS | 1 | |
| PPC1A | 2-5/8IN CHSL GAGE | 1 | |
| PT000821 | HPT VANE 2 DIMENSION B GAGE_[PT000821] | 1 | |
| PWA 102485 | STEP GAGE (TYPE 2 BLADE) | 1 | |
| PWA 102839 | GAGE, CROSS SHROUD/CROSS NOTCH (TYPE 2 BLADES) | 1 | |
| PWA 102903 | INDICATOR GAGE (REPLACES PWA 102844) | 1 | |
| PWA101022 | GAGE, GO-NO, GO_[PWA101022] | 1 | |
| PWA101023 | GAGE_[PWA101023] | 2 | |
| PWA102391 | GAGE (REPLACES PWA 47926) | 1 | |
| PWA102844 | GAGE, INDICATOR (REPLACED BY PWA 102903) | 1 | |
| PWA102903 | GAGE, INDICATOR (REPLACES PWA 102844) | 1 | |
| PWA15982 | TF33/JT3 TURBINE VANES STG 2 - CLASSIFICATION GAGE | 1 | |
| PWA15983 | TF33/JT3 TURBINE VANES STG 2 - CLASSIFICATION GAGE MASTER | 1 | |
| PWA25096 | 12 STG CHORD GAGE | 2 | |
| PWA25272 | GAGE - MGB HYD PUMP & F/C SPACERS_[PWA25272] | 2 | |
| PWA25595C | GAGE - LPC TIEROD STRETCH_[PWA25595C] | 1 | |
| PWA25915 | GAGE, CLASSIFICATION - LPT 5TH STG VANE_[PWA25915] | 2 | |
| PWA25917 | GAGE,CLASSIFICATION - LPT 6TH VANE_[PWA25917] | 1 | |
| PWA25939 | GAGE - COMP STATOR 8,9TH VANE ANGLE_[PWA25939] | 1 | |
| PWA25940 | GAGE - STATOR, HPC 9TH VANE ANGLE CHKG_[PWA25940] | 1 | |
| PWA25941 | GAGE - STATOR HPC 11TH VANE ANGLE CHK_[PWA25941] | 1 | |
| PWA25942 | GAGE - COMP STATOR 11TH STG VANE L/E_[PWA25942] | 1 | |
| PWA25943 | GAGE - STATOR, HPC 12,13 &14TH VANE ANGL_[PWA25943] | 1 | |
| PWA25944 | GAGE, STATOR - HPC 12,13 & 14TH VANE ANG_[PWA25944] | 1 | |
| PWA25978 | GAGE - IMC DRIVE GEAR_[PWA25978] | 2 | |
| PWA25979 | GAGE - AGB BACKLASH CHECK_[PWA25979] | 2 | |
| PWA26004 | GAGE - MGB F/P BEVEL GEAR THICKNESS CHK_[PWA26004] | 1 | |
| PWA26005 | GAGE - MGB HYD G/SFT DISTANCE CHECK_[PWA26005] | 2 | |
| PWA26008 | GAGE - AGB BALL BEARING,AXIAL PLAY_[PWA26008] | 2 | |
| PWA26644 | GAGE, BLADE WEAR - HPC 5TH STAGE_[PWA26644] | 2 | |
| PWA26645E | GAGE - BLADE, HPC 6TH STAGE_[PWA26645E] | 1 | |
| PWA26646F | GAGE, BLADE WEAR - HPC 7TH STAGE_[PWA26646F] | 1 | |
| PWA26647 | GAGE, BLADE WEAR - HPC 8TH STAGE_[PWA26647] | 2 | |
| PWA26648 | GAGE - BLADE, HPC 9TH STAGE_[PWA26648] | 2 | |
| PWA26649 | GAGE, BLADE WEAR - HPC 10TH STG BLADE_[PWA26649] | 2 | |
| PWA26650 | GAGE - BLADE, HPC 11TH STAGE_[PWA26650] | 2 | |
| PWA26651H | GAGE, BLADE WEAR - HPC 12TH STAGE_[PWA26651H] | 1 | |
| PWA26652 | GAGE, BLADE WEAR - HPC 13TH STAGE_[PWA26652] | 2 | |
| PWA26683 | GAGE, BLADE WEAR - HPC 14TH STAGE_[PWA26683] | 2 | |
| PWA26684 | GAGE - BLADE WEAR, HPC 15TH STAGE_[PWA26684] | 2 | |
| PWA27021 | GAGE, CALIPER - TURB C/A/NOZZ W/THK_[PWA27021] | 1 | |
| PWA27133 | GAGE - SUPPORT ASSY OVERALL DIM CHK_[PWA27133] | 1 | |
| PWA27287 | GAGE - HPT 1ST BLADE L/E EROSION_[PWA27287] | 1 | |
| PWA27720 | GAGE, CLASSIFICATION - 1ST TURB VANE_[PWA27720] | 2 | |
| PWA27724 | GAGE SET, AIRFOIL CONTOUR - 1ST TURB VN_[PWA27724] | 1 | |
| PWA27725 | GAGE_[PWA27725] | 1 | |
| PWA27850 | GAGE, STRETCH - LPC 2,3 & 4 TIERODS_[PWA27850] | 2 | |
| PWA27854B | GAGE - 2ND STG TURB VANE CLASSIFICATION_[PWA27854B] | 1 | |
| PWA28007 | GAGE, NO GO - FAN BLD INNER MIDSPAN_[PWA28007] | 1 | |
| PWA28008 | GAGE, NO GO - WEAR, 1ST FAN BLD H/FACE_[PWA28008] | 1 | |
| PWA28120 | GAGE, STRETCH - LPT SOLID TIEROD_[PWA28120] | 1 | |
| PWA28199 | GAGE - VANE ARM ANGLE CHECKING_[PWA28199] | 2 | |
| PWA28222 | GAGE, NO GO - HPC 5TH STAGE CHORD WIDTH_[PWA28222] | 1 | |
| PWA28223 | GAGE, NO GO - HPC 6TH STAGE CHORD WIDTH_[PWA28223] | 1 | |
| PWA28224 | GAGE, NO GO - BLADE, HPC 7TH STG CHORD_[PWA28224] | 1 | |
| PWA28225 | GAGE, NO GO - HPC 8TH STAGE CHORD WIDTH_[PWA28225] | 1 | |
| PWA28226 | GAGE, NO GO - HPC 9TH STAGE CHORD WIDTH_[PWA28226] | 1 | |
| PWA28227 | GAGE, NO GO - HPC 10TH STAGE CHORD WIDTH_[PWA28227] | 1 | |
| PWA28228 | GAGE, NO GO - HPC 11TH STG CHORD WIDTH_[PWA28228] | 1 | |
| PWA28229 | GAGE, NO GO - HPC 12TH STAGE CHORD WIDTH_[PWA28229] | 1 | |
| PWA28230 | GAGE,NO GO - HPC 13TH STG CHORD WIDTH_[PWA28230] | 1 | |
| PWA28231 | GAGE, NO GO - HPC 14TH STAGE CHORD WIDTH_[PWA28231] | 1 | |
| PWA28232 | GAGE, NO GO - HPC 15TH STAGE CHORD WIDTH_[PWA28232] | 1 | |
| PWA28241 | GAGES - Z.PLANE DIA 5TH STG COMPR DISK_[PWA28241] | 1 | |
| PWA28242 | GAGE - DISK, HPC 6TH STG Z-PLANE DIA._[PWA28242] | 1 | |
| PWA28243 | GAGE - DISKS,HPC 7TH~15TH STG Z-PL DIA._[PWA28243] | 1 | |
| PWA28251 | GAGE_[PWA28251] | 1 | |
| PWA28252D | GAGE, AXIAL DEFLECTION - LPT 4TH STG VAN_[PWA28252D] | 1 | |
| PWA28253 | GAGE, AXIAL DEFLECTION - LPT 5TH STG VAN_[PWA28253] | 1 | |
| PWA28254 | GAGE, AXIAL DEFLECTION - LPT 6TH STG VAN_[PWA28254] | 1 | |
| PWA28462 | GAGE,POSITION - MGB CSD TRANSFER TUBE_[PWA28462] | 3 | |
| PWA28648 | GAGE_[PWA28648] | 1 | |
| PWA28666 | GAGE_[PWA28666] | 2 | |
| PWA28678 | INSPECTION GAGE - MASTER BLADE_[PWA28678] | 2 | |
| PWA28694 | GAGE - LOW TURBINE POSITION_[PWA28694] | 1 | |
| PWA28818 | GAGE - FAN BLADE L/E & T/E THICKNESS_[PWA28818] | 2 | |
| PWA28939 | GAGE, POSITIONING - 3.0 BLEED CONTROL_DIA.12.7X261.6MM/0.225KG_[PWA28939] | 2 | |
| PWA29073 | GAGE, BLOCK - 3.0 MODUL BLD SWITCH_[PWA29073] | 1 | |
| PWA29074 | GAGE - 3.0 BLEED MODULATING LINKAGE_[PWA29074] | 2 | |
| PWA29156 | GAGE - FAN CASE RUB STRIP_127X102X102MM/0.45KG_[PWA29156] | 7 | |
| PWA29156-1 | GAGE - FAN CASE RUB STRIP_127X102X102MM/0.45KG_[PWA29156] | 1 | |
| PWA29335 | GAGE_[PWA29335] | 1 | |
| PWA29340A | GAGE, FLUSH PIN - IMC #2 BRG SEATING_[PWA29340A] | 1 | |
| PWA29527 | GAGE_[PWA29527] | 2 | |
| PWA29528 | GAGE_[PWA29528] | 1 | |
| PWA29679 | GAGE SET, AIRFOIL - LPT 4TH STG VANE_[PWA29679] | 1 | |
| PWA29681 | GAGE SET, AIRFOIL_[PWA29681] | 1 | |
| PWA29780 | GAGE - 3.0 BLEED FEEDBACK CABLE_27X25.4X12.7MM/0.225KG_[PWA29780] | 1 | |
| PWA29847 | GAGE_[PWA29847] | 2 | |
| PWA29875 | FILLER GAGE- FAN BLADE (JT9D-7Q)_[PWA29875] | 3 | |
| PWA29958 | GAGE_[PWA29958] | 1 | |
| PWA32668 | GAGE_[PWA32668] | 1 | |
| PWA33782 | GAGE,NO GO-2ND & 4TH STS TURB DISK-PLANE SLOT WEAR | 1 | |
| PWA33782 REV A | GAGE,NO GO-2ND & 4TH STS. TURB. DISK,-PLANE SLOT WEAR | 1 | |
| PWA33789 | GAGE-N2 TACH DRIVE CHECK_[PWA33789] | 1 | |
| PWA47926 | GAGE (REPLACED BY PWA 102391) | 1 | |
| PWA75025 | GAGE_[PWA75025] | 1 | |
| PWA75028 | HYDRAULIC PRESS GAGE - HPC FRONT HUB_TO MEASURE PRESS_254 X 254 X 76 MM / 0.5 KG_[PWA75028] | 6 | |
| PWA75152 | GAGE_[PWA75152] | 2 | |
| PWA75208 | GAGE_[PWA75208] | 2 | |
| PWA75209 | GAGE,Z PLATE CONTACT_[PWA75209] | 2 | |
| PWA75221 | STRETCH GAGE (MASTER)_[PWA75221] | 2 | |
| PWA75233 | GAGE_[PWA75233] | 2 | |
| PWA75283 | GAGE_[PWA75283] | 1 | |
| PWA75423 | GAGE_[PWA75423] | 2 | |
| PWA75509 | GAGE IMMERSION - SPARK IGNITER_TO MEASURE DIST FR OUTER TO LINER_0.9 KG / 203 X 64 X 64 MM_[PWA75509] | 4 | |
| PWA75669 | GAGE - HUB LENGTH NO.2 BRG SEATING_[PWA75669] | 1 | |
| PWA75828 | GAGE_[PWA75828] | 2 | |
| PWA76012 | GAGE WEAR_[PWA76012] | 2 | |
| PWA76332 | B GAGE BLADE_[PW76332] | 1 | |
| PWA86141 | GAGE ( SB PW4ENG 72-227 REV1 )_203X76X25MM/0.5KG_[PWA86141] | 1 | |
| PWA86278 | GAGE ID HPC 12TH STAGE RUBSTRIP | 1 | |
| PWC34061 | GAGE COUPLING SHAFT (PRE-SB3277) | 6 | |
| PWC57100 | PUMP HYDR. 2 SPEED (DIGITAL PRESS.GAGE) | 3 | |
| RGS-25 | 25 Piece Radius Gage Set | 1 | |
| RGS-300 | RADIUS GAGE SET 25 PIECES 1/64 TO 17/64'' | 1 | |
| RIT-12A | POWER TERMINAL WIRE INSERTION TOOL (12 GAGE) | 1 | |
| RIT-12RA | POWER TERMINAL WIRE INSERTION TOOL (12 GAGE) | 1 | |
| RJ-100 | GAGE 20 BAR (290 PSI) - PRESSURE, TIRE | 1 | |
| RM/18K-6L/LG/TS | TIRE PRESSURE GAGE 0-270 PSI | 2 | |
| RSE3502-314-CM | 20 GAGE A36 ANNEALED | 1 | |
| RSE3502-314-CMF | 20 GAGE A36 ANNEALED | 1 | |
| RSN-3AST | Gage Set NSN 5280-01-352-1336, Consist of 7075T6, 4340 & 6AL4V Standards | 1 | |
| S1812000715 | SENSOR YOKE W/STRAIN GAGE 125 | 1 | |
| S4003-250 | PIN GAGE SET 0.061 - 0.250 IN | 3 | |
| S770BXTEZ | ELECTRONIC BORE GAGE SET 0.75-2.0" | 1 | |
| S781BXTHZ | ELECTRONIC BORE GAGE SET 0.25-0.75" | 1 | |
| S781BXTHZ-STR | ELECTRONIC BORE GAGE SET 0.25-0.75" | 1 | |
| S829EZ | BALL GAGE (GSE5101092) | 2 | |
| SA30032 | BEARING ALIGNMENT MANDREL AND GAP GAGE 32-42-92 | 2 | |
| SA30056 | BEARING ALIGNMENT MANDREL AND GAP GAGE 32-42-91 | 2 | |
| SAO10229 | OXIDATION GAGE-SAO10229 | 7 | |
| SG-1140885 | #2 ALMEN GAGE DIGITAL TSP-3BB | 1 | |
| SITRANS P | DIFFERENTIAL PRESSURE GAGE (2.4 TO 240 INH2O (0.0867 TO 8.67 PSIG (0.597 TO 59.78 KPA)), ACCURACY: ±1% OF FULL SCALE) SIEMENS, SITRANS P, SERIES DSIII, TRANSMITTER MODEL 7MF4432-1EA22-1AC7-7 | 1 | |
| SPD21004 | 2 1/4"100PSIGAGE/CLT2 W/O41910 | 1 | |
| SPR100X | RING GAGE MASTER 3.93723" | 1 | |
| SR25GSDA | SR25GSDA SWAGE GAGE | 3 | |
| ST-23 | GAGE, VALVE CLEARANCE 0.028”-0.080” | 2 | |
| ST1396J-H-5 | HAND GUN-DRIVEN GAGE 5/32" | 1 | |
| ST1396J-H-7 | HAND GUN-DRIVEN GAGE 7/32" | 1 | |
| ST1396J-H-9 | HAND GUN-DRIVEN GAGE 9/32" | 1 | |
| ST8709H | GO/NO-GO GAGE - FOR ASSEMBLY OF WIGGINS BACC42R COUPLING | 6 | |
| ST8709H-1 | Standard tool-go-no-go gage for assy，of wiggins BACC42R coupling | 7 | |
| ST8709H-2 | Standard tool-go-no-go gage for assy，of wiggins BACC42R coupling | 5 | |
| ST8709H-3 | Standard tool-go-no-go gage for assy，of wiggins BACC42R coupling | 5 | |
| ST8709H-4 | Standard tool-go-no-go gage for assy，of wiggins BACC42R coupling | 8 | |
| ST8709H-5 | Standard tool-go-no-go gage for assy，of wiggins BACC42R coupling | 5 | |
| ST8709H-6 | Standard tool-go-no-go gage for assy，of wiggins BACC42R coupling | 5 | |
| ST8709H-7 | Standard tool-go-no-go gage for assy，of wiggins BACC42R coupling | 6 | |
| ST8709H-KIT | GO/NO-GO GAGE FOR ASSEMBLY OF WIGGINS BACC42R COUPLING | 2 | |
| ST8709H-X | Gage - Go/No-Go, Fuel Wiggins Coupling (BACC42R); X indicates gage number -1 to -7 | 2 | |
| ST8712P-B-9-0-1 | AD PROTRUSION GAGE, .562, BMIN | 1 | |
| ST8712P-P-9-0-1 | AD SLEEVE BOLT: PMAX PROTRUSION GAGE (0.562) | 1 | |
| ST8712PA-EK-9-0-T | EK PROTRUSION GAGE, .562 NON-RECESSED | 1 | |
| ST8712PA-EK-9-0-W | EK PROTRUSION GAGE, .562 RECESSED | 1 | |
| ST8712PC-8 | PROTRUSION GAGE, .500, SP1 AND SP2 | 1 | |
| ST8712PC-9 | PROTRUSION GAGE, .562 SP1 AND SP2 | 1 | |
| ST8721P-P-9-0-1 | AD PROTRUCSION GAGE, .562, PMAX | 1 | |
| STARRETT 269B | STARRETT 269B TAPER GAGE ( 0.5” - 1 “ ) | 1 | |
| STD2 | FEELER GAGE, 0.001 IN. (0,02 MM) | 1 | |
| T-7243023 | PULLOVER GAGE W CONT 120MM | 1 | |
| T-7247997 | PULLOVER GAGE 120MM | 1 | |
| T172-500 | T172-500 CHERRY AEROSPACE GO/NO-GO GAGE | 1 | |
| T2PP | PLUG, PIPE THREAD GAGE PORT T2PP | 1 | |
| TB3107G001 | L.E., T.E. NGV2 CHECKING GAGE | 1 | |
| TB3503G001 | DIAMETER T2 CHECKING GAGE | 1 | |
| TIRE / WHEEL ASSEMBLY SAFETY C | PUSH-PULL GAGE 0-200 POUNDS | 1 | |
| TK 1738-6 | 02 SYSTEM TEST EQUIPMENT PRESSURE GAGE (0 TO 100 PSI) (MM 35-00-00 / 20-52-00) | 1 | |
| TSP-JR | #2 Almen Gage | 2 | |
| TTL-300-DTG | TYRE PRESSURE GAGE FOR A320 AIRCRAFT | 3 | |
| TUBE1"3/4ODX11GAGEX12"-SS304 | TUBE 1"3/4OD X 11GAGE (0.120) X 12" SS304 | 1 | |
| UNK_214 | FORCE GAGE +-6 G (0.2) | 1 | |
| V/1945-02-05 | AIR PRESSURE GAGE_(0 ~ 30) IN.HG (0.1) ±0.5 %_[V/1945-02-05] | 1 | |
| VKT-LYB300C-1.0 | GAGE - PRESSURE, TIRE (FOR A320) | 1 | |
| W643JZ | ELECTRONIC DEPTH GAGE STA-62332 | 1 | |
| WA23-15 | GAGE 2/0 | 3 | |
| WAVEB2G20008 | EDDIE BOLT 2 INSPECTION GAGE F | 1 | |
| WAVEBRT100-5 | PADDLE GAGE BUT REMOVAL 5/32 | 1 | |
| WCI-CBG-06-2-N | COMBINATION GAGE 2DO OVZ | 2 | |
| WCI-CBG-06-3-N | COMBINATION GAGE, 1/4" 1ST OVERSIZE Ø.2350-.2380 , Ø.2390 | 2 | |
| WCI-CBG-08-1-N | COMBINATION GAGE, 1/4" 1ST OVERSIZE Ø.2350-.2380 , Ø.2390 | 2 | |
| WCI-CBG-08-3-N | COMBINATION GAGE, 5/16" NOMINAL Ø.2830-.2860 , Ø.2870 | 2 | |
| WCI-CBG-A62 | 2ND O.S. COMB GAGE | 1 | |
| WCI-FHG-2495-2500 | FINAL HOLE GAGES, REF: FTI, P/N: CBFG-40-.2495/.25 | 1 | |
| WCI-FHG-2495-2505 | FINAL HOLE GAGES, REF: FTI, P/N: CBFG-40-.2495/.25 | 1 | |
| WCI-FHG-A62-4050 | 2ND O.S. GO/NOGO GAGE | 1 | |
| WCI-FHG-A62-4075 | 2ND O.S. GO/NOGO GAGE | 1 | |
| WCI-FR-06-1-N-1995-RA | RIGHT ANGLE GAGE FINISH REAMER (0.199" - 0.201") | 2 | |
| WCI-FR-06-2-N-2150-RA | RIGHT ANGLE GAGE FINISH REAMER (0.215" - 0.216") | 2 | |
| WCI-FR-06-2-N-2294 | GAGE REAMER .2319/.2294 | 1 | |
| WCI-FR-06-3-N-2290 | GAGE REAMER .2319/.2294 | 1 | |
| WCI-FR-06-3-N-2305-RA | RIGHT ANGLE GAGE FINISH REAMER (0.230" - 0.232") | 2 | |
| WCI-FR-08-0-N-2450 | GAGE REAMER .2480/.2450 | 1 | |
| WCI-FR-08-0-N-2465-RA | RIGHT ANGLE GAGE FINISH REAMER. (0.246" - 0.248") | 2 | |
| WCI-FR-08-1-N-2620-RA | RIGHT ANGLE GAGE FINISH REAMER (0.261" - 0.263") | 2 | |
| WCI-FR-08-2-N-2775-RA | RIGHT ANGLE GAGE FINISH REAMER (0.277" - 0.279") | 2 | |
| WCI-FR-08-3-N-2930-RA | RIGHT ANGLE GAGE FINISH REAMER (0.290" - 0.293") | 2 | |
| WCI-FR-10-3-N-3745 | GAGE FINISH REAMER (9.512 MM) | 1 | |
| WCI-FR-26-3-N-8661 | GAGE FINISH REAMER (22 MM) | 2 | |
| WCI-FR-8-3-N-3120 | GAGE FINISH REAMER (7.925 MM) | 1 | |
| WCI-FR-A40-2495 | GAGE FINISH REAMERS, REF: FTI, P/N: CAR-40-1-.2495 | 1 | |
| WCI-FR-A40-2495-CBD | GAGE FINISH REAMERS, REF: FTI, P/N: CAR-40-1-.2495 | 1 | |
| WCI-WGX-06-2 | MANDREL WEAR GAGE,FOR 7/32" NOMINAL FASTENER SIZ | 1 | |
| WCI-WGX-08-2 | MANDREL WEAR GAGE,FOR 9/32" NOMINAL FASTENER SIZ | 1 | |
| WCI-WGX-10-1 | MANDREL WEAR GAGE,FOR 21/64" NOMINAL FASTENER SI | 1 | |
| WCIS-W6-A62 | 2ND O.S. MANDREL GAGE | 1 | |
| WCIS-WG-08-3-N | GAGE, MANDREL CHECK (0.2783) | 2 | |
| WCIS-WG-16-2-N | MANDREL GAGE PER COLD WORKING DIAM 17/32" CLASSE I | 2 | |
| WCIS-WG-A62 | 2ND O.S. MANDREL GAGE | 1 | |
| X-250C | FORCE GAGE(COMPRESSION)_(0 ~ 250) LBF (1 DIV:2.5 LBF)_[X-250C] | 1 | |
| Y631 | Die Set - M22520/5-105 - Use G668 & G190 Gage | 5 | |
| Z67514-101 | PACK ENVELOPE GAGE, A320 FWD S | 1 | |
| Z67515-101 | PACK ENVELOPE GAGE, A320 AFT S | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
