| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| AMT23101DA | GAGE 10 | 1 | |
| AMT23263L | GAGE 10 | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) FDIX 100 | GAGE - FORCE, DIGITAL (0 TO 100 LBS) (CALIBRATION) | 1 | |
| (CALIB) SM709 | GAGE 0-100PSI (CALIBRATION) (CALIBRATION) | 1 | |
| 106 | GAGE,DEPTH,MICROMETER;2.500";PROVIDED;0.0010";MULTIPLE ROD; 0.000 TO 6.000";NOT INCLUDED;6;1/8 IN. DIA;| | 1 | |
| 062516 | Sensor Gaged for SDX10i | 1 | |
| 063603 | Sensor Gaged for BMX10i | 1 | |
| 063606 | Sensor Gaged for BMX100i | 1 | |
| 063611 | Sensor Gaged for BMX100F | 1 | |
| 063614 | Sensor Gaged for BMX1000F | 1 | |
| 066581 | Sensor Gaged MTX 10z | 1 | |
| 1005SWATER | PRESSURE GAGE (WATER 0-100PSI) | 1 | |
| 101-000000/934 | TORQUE SYSTEM PRESSURE TESTER (WITH 0-100 INSP. GAGE) | 3 | |
| 101-00212 | TORQUE SYSTEM PRESSURE TESTER (WITH 0-100 INSP. GAGE) BARFIELD MODEL 2311-F | 9 | |
| 1082-00-20 | GAGE, HYDRAULIC PRESSURE: 0 TO 20 PSIG (138 KPAG) ,0 TO 100 PSIG (690 KPAG),0 TO 250 PSIG (1724 KPAG),0 TO 300 PSIG (2069 KPAG),0 TO 600 PSIG (4137 KPAG) AND 0 TO 5000 PSIG (34475 KPAG) | 1 | |
| 138-70-343-21 | ENERPAC GAGE 0-10,000 | 1 | |
| 138-70-343-22 | ENERPAC GAGE 0-10,000 | 1 | |
| 1409-161949 | GAGE PRESSURE 0-100PSI | 1 | |
| 1409-161954 | GAGE PRESSURE 0-1000 PSI | 1 | |
| 1410 | TRACTOR - BAGGAGE & CARGO 10,000 LB DRAWBAR PULL | 1 | |
| 1440-2 | GAGES PART NUMBER: 1440-2, SUPPLIER CODE: K1012/01558 | 3 | |
| 155-903 | GAGE SET TELESCOPING - 5210004739350 | 3 | |
| 2004830 | model 5' x 10' closed baggage cart with knock down side option | 1 | |
| 2004831 | model 5' x 10' closed baggage cart with reinforced vinyl side curtains on both sides (one side can be closed at no charge). | 1 | |
| 2004872 | model 5' x 10' open baggage cart with removable end panels. | 1 | |
| 20161120 | GAGE 0- 10,000 | 1 | |
| 24-67003SP | ED1050 GAGE PLATE ASSY | 1 | |
| 25-1009-SW-02L-XSG-0/100 | GAGE KMA AIR PRESSURE KMA 0-100PSI | 1 | |
| 2C5702G01 | GAGE - STG 10 THRU 14 | 1 | |
| 2C81133G01 | GAGE, BUMPER WEAR - FAN DISK (0101") | 1 | |
| 2C91326G01 | GAGE - CLEARANCE STG 104. 105, AND 159 | 1 | |
| 4001255-1 | BEARING ALIGNMENT & GAP GAGE [ P/N CMM : SA30103 ] | 1 | |
| 4096461-613P02 | GAGE, GO-NO-GO (STAGE 10 VANE AIRFOILS) | 1 | |
| 451082PS02L200#XPDXC4 | TEST GAGE MODEL 1082 0-200PSI | 1 | |
| 4823-1 | GAGE (FOR ST2220-10 TOOL) | 1 | |
| 4KY23 | DIAL DEPTH GAGE 22" / WESTWARD 10 PCS | 2 | |
| 644 | DIAL DEPTH GAGE, 0-3" RANGE, 0-100 DIAL, .001" GRADUATIONS | 1 | |
| 505056 | GAGE 10 GAUSS EMF | 5 | |
| 621056 | GAGE (M22520/3-9) FOR M/5-100, /10-100 | 1 | |
| 621057 | GAGE (M22520/3-10) FOR M/5-100, /10-101 | 1 | |
| 644JZ | DIAL DEPTH GAGE, 0-3 RANGE, 0-100 DIAL, .001 G | 5 | |
| 65425-101 | MASTER GAGE/ADAPTER ASSEMBLY 65425-101 | 1 | |
| 660037 | GAGE-FOR A810-1 CRIMP TOOL | 1 | |
| 67515-101 | ENVELOPE GAGE, AFT DOOR D31517-( ) 67515-101 | 1 | |
| 67808-101 | ENVELOPE GAGE, AFT DOOR D30665-( ) 67808-101 | 2 | |
| 67809-101 | ENVELOPE GAGE, FORWARD DOOR D30664-( ) 67809-101 | 2 | |
| 7210 | DIAL DEPTH GAGE 0-10MM | 9 | |
| 7572-3B | INSTALL TOOL, TANGLESS GAGE STYLE, 10-32 | 2 | |
| 856A1206G06 | GAGE, RUNOUT - CDP SEAL (110V / 220V/50HZ) (RUNOUT GAGE) | 9 | |
| 90-TRA-10P | Bowers 90-TRA-10P Gagemaker Thread Roll ACME 10 Pitch (Set of 2) | 1 | |
| 90-TRB74510P | Bowers 90-TRB74510P Gagemaker Thread Rolls 10mm Pitch | 1 | |
| 90-TRSA-10P | Bowers 90-TRSA-10P Gagemaker Thread Roll Stub ACME 10 Pitch | 1 | |
| 90-TRVE-10P | Bowers 90-TRVE-10P Gagemaker Thread Roll External 10 Pitch | 1 | |
| 939-2 | 02 SYSTEM TEST EQUIPMENT PRESSURE GAGE (0 TO 100 PSI) (MM 35-00-00 / 20-52-00) | 2 | |
| 9C1022G01 | DEPTH GAGE_(0.5 ~ 6) INCH_[9C1022G01] | 1 | |
| AGE-01098-001 | WRENCH-ADJ, BAGGAGE DOOR ECCENTRIC P/N AGE-01098-001 | 4 | |
| AGM06010 | GAGE (EQUIVALENT TO M22520/6-010) | 1 | |
| AMT23010L | LOCATOR (M22520/23-10) 6 GAGE | 1 | |
| AMT23102L | LOCATOR, 10 GAGE | 1 | |
| AMT23153L | LOCATOR, 10-12 GAGE | 1 | |
| AMT23223L-BX | LOCATOR, 8 GAGE (=10-589525-8) | 1 | |
| AMT23263L | LOCATOR, 10 GAGE | 1 | |
| AMT23264DA | DIE ASSEMBLY, 10 GAGE | 1 | |
| AMT23265DA | DIE ASSEMBLY, 10 GAGE | 1 | |
| AMT23293L | LOCATOR, 10 GAGE | 1 | |
| AMT23447L | LOCATOR, #8 & 10 GAGE | 1 | |
| AMTG23100 | GAGE-FOR AMT23100DA | 1 | |
| AMTG23101 | GAGE-FOR AMT23101DA | 1 | |
| AMTG4301 | Gage (22-16) -GO .1090 - NO-GO .1150 | 2 | |
| AMTG4303 | Gage (22-16) -GO .0300 - NO-GO .1100 | 2 | |
| ASHCROFIT 1008 | ASHCROFIT GAGE 0-10,000 | 1 | |
| ASHCROFT 0-100 | ASHCROFT 0-100 PSI GAGE TO 2C14711G01 | 1 | |
| ATD 1035-135 | INSERTION TOOL 22 GAGE DEUTSCH TSE 10 TO 22 SPLICE. | 1 | |
| ATD1035 | INSERTION TOOL 22 GAGE DEUTSCH TSE 10 TO 22 SPLICE. | 2 | |
| ATR1080 | INSERTION TOOL 20 GAGE DEUTCSH TSE10-20 SPLICE. | 3 | |
| B27039-28 | RIGGING EQUIPMENT - CONTROL INSTALLATION, ELEVATOR AND STABILIZER TRIM SYSTEMS - 757,RIGGING EQPT - GAGE (B27039-3 ASSY INCLUDED IN B27039-28 EQPT) (GDC10117) | 9 | |
| BG200 | DIGITAL FORCE GAGE 1000 N; 0.5 N | 1 | |
| BGP10S | ENERPAC GAGE 0-10,000 PSI | 1 | |
| CBR-10-0-N-1 | GAGE REAMER .3100/.3070 | 1 | |
| CBR-4-2-N-1 | GAGE REAMER .1610/.1590 | 1 | |
| CBR-6-1-N-1 | GAGE REAMER .2010/.1990 | 1 | |
| CGF-3X-3B | KATO TANGLESS GAGE WORKING 3B SIZE 10-32 REF. CGF-3X-3B | 1 | |
| D12-9892-10 | INSPECTION GAGE 10 | 5 | |
| DBS-CG7 | VERIFICATION INSPECTION GAGE FOR DBS-2100 | 3 | |
| DFE 200 | FORCE GAGE (0 - 100 LB) (OR EQUIVALENT) | 2 | |
| DG-100 | TOOL GAGE DPPH100 PUSH PULL | 1 | |
| DG-200 | GAGE - FORCE, DIGITAL (0 TO 100 LBS) | 11 | |
| DGB1 | DIGITAL PRESSURE GAGE_0 ~ 10000 PSI (10) ±0.5 %_[DGB1] | 1 | |
| DGSLG10 | ANALOG FORCE GAGE 10LB | 1 | |
| DP6328 | Starrett 1015MB-100 DIAL THICKNESS GAGE | 1 | |
| DPPH-100 | GAGE - DIAL PUSH/PULL, 0-100 LBS | 2 | |
| DPPH100 | TOOL GAGE DPPH100 PUSH PULL | 2 | |
| DS2-110 | Digital Force Gage - 110 lbs. x .1 lb. | 3 | |
| F70284-1 | GAGE SET-GROUND POWER_1.8KG/330X179X102MM_[F70284-1] | 28 | |
| FB-310B | FEELER GAGE_(0.001 ~ 0.015) INCH_[FB-310B] | 4 | |
| FB316B | 18SPK/IGN FLR GAGE(.010-.035") | 3 | |
| FBL4 | FEELER GAGE_0.005(4), 0.008(4), 0.010(4), 0.015(4)_[FBL4] | 1 | |
| FDIX 100 | GAGE - FORCE, DIGITAL (0 TO 100 LBS) | 6 | |
| FDIX100 | GAGE-FORCE,DIGITAL- 0 TO 100 LBS | 6 | |
| FDK-10 | GAGE, FORCE, PUSH/PULL, 10 LB | 1 | |
| G1001 | Gage - GO .0360 - NO-GO .0410 for M309 | 2 | |
| G1004 | Gage - GO .0610 - NO-GO .0660 for M309 | 2 | |
| G1006 | Gage - GO .0760 - NO-GO .0810 for M309 | 2 | |
| G1008 | Gage - GO .1000 - NO-GO .1100 for M309 | 4 | |
| G1122 | GAGE, GO/NO-GO M22520/39-03 GMT1090 | 2 | |
| G1150 | GAGE GO.1110 - NO-GO.1190- Use w/ HD51-114N & -118N | 2 | |
| G1152 | Gage GO .0610 - NO-GO .0660 | 2 | |
| G1154 | GAGE GO.2710 - NO-GO.2790 - Use w/ HD51-122N & -123N | 2 | |
| G120 | Gage - GO .0960 - NO-GO .1000 - M22520/3-2 | 2 | |
| G145 | Gage - GO .0410 - NO-GO.0460 - M22520/3-3 | 2 | |
| G150 | Gage - GO .1015 - NO-GO .1085 - M22520/6-001 | 2 | |
| G1720-5 | Gage - GO .0510 - NO-GO .0580 | 2 | |
| G191 | Gage - GO .2275 - NO-GO .2345 - M22520/6-010 | 2 | |
| G196 | Gage - GO .3105 - NO-GO .3175 - M22520/6-016 | 2 | |
| G208 | Gage - GO .0965 - NO-GO .1035 - M22520/6-031 | 2 | |
| G214 | Gage - GO .0160 - NO-GO .0210 | 2 | |
| G217 | Gage - GO .0260 - NO-GO .0310 | 2 | |
| G222 | Gage - GO .0360 - NO-GO .0410 | 2 | |
| G228 | Gage - GO .0160 - NO-GO .0210 | 2 | |
| G236 | Gage - GO .0410 - NO-GO .0460 | 2 | |
| G247 | Gage - GO .1080 - NO-GO .1180 | 2 | |
| G252 | Gage - GO .0310 - NO-GO .0330 | 2 | |
| G255 | Gage - GO .1025 - NO-GO .1065 | 2 | |
| G259 | Gage - GO .1480 - NO-GO .1510 - M22520/3-7 | 2 | |
| G260 | Gage - GO .1210 - NO-GO .1240 - M22520/3-8 | 2 | |
| G262 | Gage - GO .0960 - NO-GO .1040 - M22520/3-10 | 2 | |
| G265 | Gage - GO .0430 - NO-GO .0510 - M22520/3-13 | 2 | |
| G276 | Gage - GO .1025 - NO-GO .1075 | 2 | |
| G290 | Gage - GO .0975 - NO-GO .1025 | 2 | |
| G296 | Gage - GO .1080 - NO-GO .1180 | 2 | |
| G32004-5 | GAGE EQPT - TRUNNION & DRAG LINK FITTING INSTL, NLG SPL-6909, SPL-6910 | 6 | |
| G327 | Gage - GO .0510 - NO-GO .0570 for AMP 46447 | 2 | |
| G330 | Gage - GO .0860 - NO-GO .1000 | 2 | |
| G334 | Gage - GO .1000 - NO-GO .1060 | 2 | |
| G351 | Gage - GO .0410 - NO-GO .0490 | 2 | |
| G353 | Gage - GO .1130 - NO-GO .1210 | 2 | |
| G395 | Gage - GO .0920 - NO-GO .1020 | 3 | |
| G396 | Gage - GO .0990 - NO-GO .1090 | 2 | |
| G40 | Gage - GO .0440 - NO-GO .0510 | 2 | |
| G403 | Gage - GO .0330 - NO-GO .0410 | 2 | |
| G416 | Gage - GO .1010 - NO-GO .1090 | 2 | |
| G424 | Gage - GO .0760 - NO-GO .0810 | 2 | |
| G430 | Gage - GO .1040 - NO-GO .1080 | 2 | |
| G436 | Gage - GO .0610 - NO-GO .0660 | 2 | |
| G506 | Gage - GO .0360 - NO-GO .0410 | 2 | |
| G519 | Gage - GO .1055 - NO-GO .1105 | 2 | |
| G533 | Gage - GO .1970 - NO-GO .2010 | 2 | |
| G624 | Gage - GO .1910 - NO-GO .2010 | 3 | |
| G628 | Gage - GO .0105 - NO-GO .0145 | 2 | |
| G630 | Gage - GO .1030 - NO-GO .1090 | 2 | |
| G678 | Gage - GO .1080 - NO-GO .1170 | 2 | |
| G694 | Gage - GO .1710 - NO-GO .1780 | 2 | |
| G697 | Gage - GO .3510 - NO-GO .3580 | 2 | |
| G701 | Gage - GO .0440 - NO-GO .0510 - MS3196-20 | 2 | |
| G722 | Gage - GO .2968 - NO-GO .3010 - MS90486-4 | 2 | |
| G726 | Gage - GO .3368 - NO-GO .3410 - MS23003-1 | 2 | |
| G744 | Gage - GO .1310 - NO-GO .1390 | 5 | |
| G746 | Gage - GO .2020 - NO-GO .2100 | 2 | |
| G747 | Gage - GO .2610 - NO-GO .2690 | 9 | |
| G749 | Gage - GO .2710 - NO-GO .2790 | 2 | |
| G752 | Gage - GO .1110 - NO-GO .1270 - M81306/2-02F | 2 | |
| G755 | Gage - GO .1510 - NO-GO .1590 | 2 | |
| G767 | Gage - GO .1090 - NO-GO .1150 | 2 | |
| G788 | Gage - GO .2150 - NO-GO .2210 | 2 | |
| G795 | Gage - GO .1080 - NO-GO .1130 | 2 | |
| G80 | Gage - GO .0410 - NO-GO .0445 | 2 | |
| G811 | Gage - GO .0310 - NO-GO .0340 | 2 | |
| G812 | Gage - GO .3105 - NO-GO .3155 | 2 | |
| G872 | Gage - GO .2370 - NO-GO .2410 | 2 | |
| G885 | Gage - GO .1000 - NO-GO .1080 for DCT4-105 | 2 | |
| G886 | Gage - GO .0740 - NO-GO .0820 for DCT4-105 | 2 | |
| G887 | Gage - GO .0630 - NO-GO .0710 for DCT4-105 | 2 | |
| G928 | Gage - GO .1170 - NO-GO .1210 with Flats | 2 | |
| G931 | Gage GO 0.1260/0.0900/0.0760 - NO-GO 0.1380/0.1020/0.0880 | 2 | |
| G961 | Gage - GO .3210 - NO-GO .3290 | 2 | |
| G967 | Gage - GO .3100 - NO-GO.3200 | 2 | |
| G986 | Gage - GO .0910 - NO-GO .0970 | 2 | |
| GGG-G-17 | GAGE SET,TELESCOPIN NSN: 5210004739350 | 1 | |
| GS10-752B-20 | GB713-NOSE ASSEMBLY ACCESSORIES (MFG : GAGEBILT DIA : 10/32 TYPE : STRAIGHT) | 1 | |
| GSB2000024 | FORCE GAGE (0 - 100 LB) | 1 | |
| GSB5231001 | TEST FIXTURE P/N: GSB5231001 TO BE USED IN TESTING JXH AFT BAGGAGE DOOR GAS SPRINGS INTEGRITY. | 1 | |
| GSE5100758 | PUSH-PULL FORCE GAGE, (0 - 50 POUNDS)-GSE5100761 & GSE5100758 | 1 | |
| GSE5100761 | PUSH-PULL FORCE GAGE, (0 - 50 POUNDS)-GSE5100761 & GSE5100758 | 1 | |
| GSE5101092 | BALL GAGES-GSE5101092 | 1 | |
| HCS2027-01 | VACUUM GAGE 0-(-100) KPA | 3 | |
| HCS2027-03 | VACUUM GAGE 0-(-100) KPA | 1 | |
| HF439 | GAGE ASSY AIR PRESSUR KMA 0-100PSI | 2 | |
| HG77-13A | PIN/COLLAR GAGE (FOR PINS 0.250 IN DIAMETER AND COLLARS, NAS1080C08) | 1 | |
| HG77-14A | PIN/COLLAR GAGE (FOR PINS 0.190 IN DIAMETER AND COLLARS, NAS1080C06) | 1 | |
| IAE 2F10418 | IAE 2F10418 LENGTH GAGE | 1 | |
| J27034-27 | .010 thickness gage | 1 | |
| LG-100 | GAGE - FORCE, DIGITAL (0 TO 100 LBS) | 10 | |
| LSTRS100A1 | BLOCK GAGE-.100 SHORT | 1 | |
| LTCT9896 | 100. GAGE SPLIN WEAR | 1 | |
| M22520/3-3 | GAGE GO .0410 - NO-GO .0460 | 1 | |
| M22520/6-020 | GAGE G199 FOR Y910 | 1 | |
| M7-200 | DIGITAL FORCE GAGE 1000 N; 0.5 N | 1 | |
| M7200 | DIGITAL FORCE GAGE 1000 N; 0.5 N | 1 | |
| MF-10 | DIAL PUSH-PULL GAGE_(0 ~ 10) LBF (1 DIV:0.05 LBF)_[MF-10] | 1 | |
| MT0000243 | BORE GAGE 100-160/0.01MM 511-714 | 1 | |
| PWA 102903 | INDICATOR GAGE (REPLACES PWA 102844) | 1 | |
| PWA101022 | GAGE, GO-NO, GO_[PWA101022] | 1 | |
| PWA101023 | GAGE_[PWA101023] | 2 | |
| PWA101089 | GAGE, GO-NO, GO_[PWA101089] | 1 | |
| PWA101090 | GAGE_[PWA101090] | 2 | |
| PWA101763 | GAGE SET_[PWA101763] | 1 | |
| PWA102844 | GAGE, INDICATOR (REPLACED BY PWA 102903) | 1 | |
| PWA102903 | GAGE, INDICATOR (REPLACES PWA 102844) | 1 | |
| PWA26649 | GAGE, BLADE WEAR - HPC 10TH STG BLADE_[PWA26649] | 2 | |
| PWA28227 | GAGE, NO GO - HPC 10TH STAGE CHORD WIDTH_[PWA28227] | 1 | |
| PWA29156 | GAGE - FAN CASE RUB STRIP_127X102X102MM/0.45KG_[PWA29156] | 7 | |
| PWA29156-1 | GAGE - FAN CASE RUB STRIP_127X102X102MM/0.45KG_[PWA29156] | 1 | |
| PWA46008 | GAGE (REPLACED BY PWA 101193) | 1 | |
| PWA46009 | GAGE (REPLACED BY PWA 101193) | 1 | |
| PWA47926 | GAGE (REPLACED BY PWA 102391) | 1 | |
| PWA86224 | GAGE ID HPC 10TH STAGE RUBSTRIP | 1 | |
| S108-012 | CANOPY COVER, 108-3 models, over the top style, extends to cover baggage door | 1 | |
| S108-013 | CANOPY COVER, over top type, 108-3 models, extends to cover baggage door, extended to overlap with shortened Empennage Cover | 1 | |
| S108-014 | EXTENDED CANOPY COVER, 108-3 models, over-top type, extends to cover baggage door, extended to overlap with shortened Empennage Cover | 1 | |
| S108-825 | TRAVEL COVER, Light Weight Canopy Cover, 108-3 models, over the top style, extends to cover baggage door | 1 | |
| S343-20-11 | GAGE AND DRIVE ASSY 100IN OZ | 1 | |
| S829EZ | BALL GAGE (GSE5101092) | 2 | |
| SAO10229 | OXIDATION GAGE-SAO10229 | 7 | |
| SPD21004 | 2 1/4"100PSIGAGE/CLT2 W/O41910 | 1 | |
| ST-310 | LYCOMING™ ST-310 GAGE, FOR IO-360-N1A ENGINES | 3 | |
| T-7243022 | PULLOVER GAGE W CONT 105MM | 1 | |
| T-7247996 | PULLOVER GAGE 105MM | 1 | |
| TK 1738-6 | 02 SYSTEM TEST EQUIPMENT PRESSURE GAGE (0 TO 100 PSI) (MM 35-00-00 / 20-52-00) | 1 | |
| TK1738-6 | PRESSURE GAGE (0 TO 100PSI) (BEECHCRAFT CORP) | 1 | |
| WAVRTO100-10 | 10IN DIA WRENCH PADDLE GAGE | 1 | |
| WCI-FR-04-2-N-1590 | GAGE REAMER .1610/.1590 | 2 | |
| WCI-FR-10-0-N-xxxx | GAGE REAMER .3100/.3070 | 1 | |
| Y631 | Die Set - M22520/5-105 - Use G668 & G190 Gage | 5 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
