| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| WA23-14 | GAGE 1 | 3 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) A21012-1 | GAGE TEST INSTULENT COOLING 15PSI (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) FDIX 100 | GAGE - FORCE, DIGITAL (0 TO 100 LBS) (CALIBRATION) | 1 | |
| (CALIB) SM709 | GAGE 0-100PSI (CALIBRATION) (CALIBRATION) | 1 | |
| 01A1302-0000 | TOW BAR-AIR PORTABLE (BAGGAGE HOLD) EMB195 | 3 | |
| 1005SWATER | PRESSURE GAGE (WATER 0-100PSI) | 1 | |
| 101-000000/934 | TORQUE SYSTEM PRESSURE TESTER (WITH 0-100 INSP. GAGE) | 3 | |
| 101-00212 | TORQUE SYSTEM PRESSURE TESTER (WITH 0-100 INSP. GAGE) BARFIELD MODEL 2311-F | 9 | |
| 106 | GAGE,DEPTH,MICROMETER;2.500";PROVIDED;0.0010";MULTIPLE ROD; 0.000 TO 6.000";NOT INCLUDED;6;1/8 IN. DIA;| | 1 | |
| 1082-00-20 | GAGE, HYDRAULIC PRESSURE: 0 TO 20 PSIG (138 KPAG) ,0 TO 100 PSIG (690 KPAG),0 TO 250 PSIG (1724 KPAG),0 TO 300 PSIG (2069 KPAG),0 TO 600 PSIG (4137 KPAG) AND 0 TO 5000 PSIG (34475 KPAG) | 1 | |
| 11851 | GAGE G189 FOR Y216 | 1 | |
| 1250 CORREX 3R | FORCE GAGE +-3G (0.1)/+-3CN(0.1) | 1 | |
| 138-70-343-21 | ENERPAC GAGE 0-10,000 | 1 | |
| 138-70-343-22 | ENERPAC GAGE 0-10,000 | 1 | |
| 14-6805-6010 | NITROGEN PRESSURE GAGE(GSE1220206 OR EQUIVALENT) | 20 | |
| 14-6806-6011 | 1.PRESSURE GAGE( GSE3200197 OR EQUIVALENT) | 23 | |
| 14-6807-6011 | GAGE - TIRE PRESSURE, 0-300 PSIG (0-2069 KPA), STD-1132 | 19 | |
| 1409-161949 | GAGE PRESSURE 0-100PSI | 1 | |
| 1409-161950 | GAGE PRESSURE 0-160 PSI | 1 | |
| 1409-161954 | GAGE PRESSURE 0-1000 PSI | 1 | |
| 1409-161955 | GAGE PRESSURE 0-1500 PSI | 1 | |
| 1440-2 | GAGES PART NUMBER: 1440-2, SUPPLIER CODE: K1012/01558 | 3 | |
| 1527T-305332 | GAGE,PLUG,THREAD,GO-NOGO,1"-12UNF,DOUBLE-END,TRU | 1 | |
| 1527T-315333 | GAGE,PLUG,THREAD,GO-NOGO,1"-12UNF,DOUBLE-END,TRU | 1 | |
| 155-903 | GAGE SET TELESCOPING - 5210004739350 | 3 | |
| 155-907 | TELESCOPING GAGE SET 0.313-6” | 1 | |
| 15F2800 | CART - BAGGAGE - 60 INCH X 120 INCH OPEN STYLE WITH REMOVABLE END PANELS - 8,000 LB CAPACITY | 1 | |
| 173MA | THICKNESS GAGE(13 LEAVES) 0.03-0.5MM | 1 | |
| 17A1572G01 | GAGE, OVERSIZED SETSCREW STG 8-14 | 1 | |
| 18-35 | DRILL GAGE METRIC 1.5 TO 12.5 | 1 | |
| 186 | STARRETT® #1 thru #60 EZ Read Drill Gage- USA MADE! | 1 | |
| 187 | STARRETT® Fractional 1/16" thru 1/2" EZ Read Drill Gage- USA MADE! | 3 | |
| 1410 | TRACTOR - BAGGAGE & CARGO 10,000 LB DRAWBAR PULL | 1 | |
| 192-112 | HEIGHT GAGE .001-18 | 1 | |
| 192-115 | HEIGHT GAGE .001-40 | 1 | |
| 19286-0370 | Imperium™ Cable Assembly Inspection Gage for Receptacle Harness Assembly Kits for 1/0 and 1 AWG cables, 171466 series. | 1 | |
| 2-1522HST | HI-LITE PROTRUSION GAGE #5-12 DIA | 1 | |
| 2.0625-16-UNS-3B-NO-GO | GAGE - 2\.0625-16-UNS-3B NO GO/2\.0272 PITCH DIA (FOR ST | 1 | |
| 20-1000-01B160 | GAGE,PRESSURE,DIAL 0-160PSI | 1 | |
| 200AO | GAGE PROTECTOR 1/4" NPT 5000PSI | 1 | |
| 210-004 | CANOPY COVER, Wrap-Around, (late mod's, no struts, 1967 G-model & up, ext. to cover baggage door) | 1 | |
| 210-007 | CANOPY COVER, Wrap-Around (early mod's, with struts, with rear window, 1962-66, aft extension over baggage door) | 1 | |
| 210-009 | CANOPY COVER, over top type, B thru F models, 1962-66, aft extension over baggage door | 1 | |
| 210-013 | EXTENDED CANOPY COVER, over-top type, 1962-66: w/struts, w/rear window), extends to cover baggage door | 1 | |
| 210-806 | TRAVEL COVER, Light Weight Canopy Cover, Wrap-Around, (late mod's, no struts, 1967 G-model & up, ext. to cover baggage door) | 1 | |
| 2141-201A | DIGITAL DEPTH GAGE - RANGE: 0-12"/300MM ACCURACY: /- 0.0008/.02MM | 1 | |
| 2311FA | TESTER,PRESSURE GAGE 2311FA | 7 | |
| 232 | FEELER GAGE SET 15 PC 6 L .0020 - .025 | 4 | |
| 24-67003SP | ED1050 GAGE PLATE ASSY | 1 | |
| 247C5039 | GAGE, LENGTH-BLADE HPTR STG 1-2 | 1 | |
| 25-1009-SW-02L-XSG-0/100 | GAGE KMA AIR PRESSURE KMA 0-100PSI | 1 | |
| 269B | STARRETT 269B TAPER GAGE ( 0.5” - 1 “ ) | 2 | |
| 269B12 | CherryMAXIBOLT 269B12 Lockbolt Grip Gage | 2 | |
| 26MG-XT | DIGITAL ULTRASONIC THICKNESS GAGE (PANAMETRICS INC., 221 CRESCENT STREET, WALTHAM, MA 02154-2719, U.S.A.) | 1 | |
| 2843-006 | GAGE, MANDREL CHECK(1.0285) | 1 | |
| 2900-5-1R | STARRET 2900-5-1R RIVET HEIGHT GAGE | 1 | |
| 2900-51R | RIVET HEIGHT GAGE - 2900-5-1R W/683-3 BODY | 1 | |
| 294884-1 | DUMMY SHAFT (LOCATES OVER TURBINE END OF 3822077-1 TIE SHAFT AND ENGAGE ON SHAFT) | 1 | |
| 297292-1 | (NSN: 5220-01-687-5924), GAGE, RING, MASTER SETTING | 1 | |
| 298108-1 | FAN SHAFT STRETCH GAGE [PRE SB TFE731-72-3637 | 1 | |
| 2C14774G03 | GAGE, FLOW AREA -HPT NOZZLE STAGE 1 | 1 | |
| 2C14777G01 | GAGE, INSPECT – HPT1 BLADE T/E | 1 | |
| 2C14796G01 | STG 1 HPT BLADE LENGTH GAGE | 2 | |
| 2C14805 | GAGE, TRAILING EDGE BOW - STAGE 1 HP TURB ROTOR BL | 1 | |
| 2C14805G01 | GAGE - TRAILING EDGE BOW STG 1 HPT ROTOR BLADE | 2 | |
| 2C5702G01 | GAGE - STG 10 THRU 14 | 1 | |
| 2C5772P01 | GAGE - STG 1 NOZZLE | 1 | |
| 2C641 | ASCROFT 0-5 PSI , +/- 1 PRESSURE GAGE, ¼ NPT X 2.5 DIA | 2 | |
| 2C6505 | GAGE, AREA-HPT NOZZLE, STAGE 1 | 1 | |
| 2C6505G01 | GAGE, AREA-HPT NOZZLE, STAGE 1 | 1 | |
| 2C6505G02 | GAGE, AREA - HPT NOZZLE STAGE 1 | 1 | |
| 2C6541 | (RT) GAGE,INSP-HPCR-STG 11-13 | 1 | |
| 2C6542 | (RT) GAGE,INSP-HPCR-STG 14-16 | 1 | |
| 2C6613G01 | GAGE BHGE 2C6613G01, IMMERSION DEPTH USED IN WP 1516 00 SPECIAL TOOL FOR IGNITER PLUG REPLACEMENT | 10 | |
| 2C6846 | GAGE, 1ST STAGE HPT NOZZLE | 1 | |
| 2C6846G03 | GAGE, AREA-HPT NOZZLE STAGE 1 | 1 | |
| 2C6920 | PIN, GAGE, FAN DISK - STAGE 1 | 2 | |
| 2C6930G01 | GAGE,COMPARISON-S1 FAN BLD DVTL WE | 1 | |
| 2C6962G05 | GAGE SIGHT (CF6-6,-50,-80A,-80C2,-80E1 | 8 | |
| 2C6963G04 | Gage Set, IGV, Stg.1-4 (80A3 / C2) | 2 | |
| 2C7549G06 | LENGTH GAGE STG 1 BLADES | 1 | |
| 2C8016G03 | GAGE, SIGHT BHGE 2C8016G03 FOR VSV STAGE 5 ACTUATION ARMS USED IN WP 4028 00 SPECIAL TOOL FOR HIGH PRESSURE COMPRESSOR IGV AND VSV VISUAL INDPECTION | 2 | |
| 2C8055 | GO/NO GO GAGE SPLINE WEAR, HORIZ DRIVE SHAFT - 1GB | 2 | |
| 2C81133G01 | GAGE, BUMPER WEAR - FAN DISK (0101") | 1 | |
| 2C81303P02 | GAGE, AREA - HPT, STAGE 1 NOZZLE | 1 | |
| 2C91326G01 | GAGE - CLEARANCE STG 104. 105, AND 159 | 1 | |
| 2C91389 | GAGE, SIGHT, VANE ANGLE STAGE 1-5 (IGV) | 1 | |
| 2OHME65B00163-2-CM | 11 GAGE HRS | 1 | |
| 2OHME65B00163-2-CMF | 11 GAGE HRS | 1 | |
| 2R1121G01 | GAGE SET, TANG HANG - STAGE 1 | 1 | |
| 2ZVE1 | FEELER GAGE 13 LEAVES | 1 | |
| 30-1084-S-02L-0/60 PSI ASHCROFT | 3" PRESSURE GAGE WITH CERTIFICATE 1/4NPT LOWER CONNECTOR | 1 | |
| 332A94-3182-00 | TOOLING ASSEMBLY,LANDING GEAR (ICO 13-30-90-02) CHECK GAGE 000 | 1 | |
| 3402-3 | POSITIONER, STATIC, 12 GAGE | 1 | |
| 35-1009-SW-02L-200PSI | PRESSURE GAGE (2 REQUIRED (0 TO 300 PSIG (0 TO 2068 KPA), ±1% OF FULL SCALE) (ASHCROFT) | 1 | |
| 350A91-0211-01/PHP | SHACKLE, GAGE 16 | 1 | |
| 3C-681-25 | GAGE BILT 3C-681-25 Straight Non Self-Releasing 332 Blind Rivet Pulling Head | 1 | |
| 4001255-1 | BEARING ALIGNMENT & GAP GAGE [ P/N CMM : SA30103 ] | 1 | |
| 4088K42 | PRESSURE GAGE 138 BAR ( 2000PSI) | 1 | |
| 4096461-613P02 | GAGE, GO-NO-GO (STAGE 10 VANE AIRFOILS) | 1 | |
| 4096461-613P03 | GAGE, GO-NO-GO (STAGE 11 VANE AIRFOILS) | 1 | |
| 451082PS02L200#XPDXC4 | TEST GAGE MODEL 1082 0-200PSI | 1 | |
| 456MAX-751D-54RA | ANGLE NOZZLE 3/16, GAGE BILT | 2 | |
| 493 | GAGE,THICKNESS:STRAIGHT,3.312" BLADE LG | 1 | |
| 4697 | GAGE POSITIONER (MS3196-1) | 1 | |
| 46647 | CRIMP TOOL SIZE GAGE 16-22 | 1 | |
| 4823-1 | GAGE (FOR ST2220-10 TOOL) | 1 | |
| 492037Z146105 | RE-ENGAGEMENT TOOL - BUSHING (856A3924G01) | 1 | |
| 4GP | PLUG, MS GAGE PORT, WITHO-RING(D18302 VALVE/REGULATORS) | 1 | |
| 4KY23 | DIAL DEPTH GAGE 22" / WESTWARD 10 PCS | 2 | |
| 5/8-18-TRG-3A-SET | 5/8-18 UNJF 3A GO/NO GO RING GAGE SET. PD: .5889" / .5854" | 1 | |
| 516-126 | GAGE BLOCK SET_[516-126] | 1 | |
| 527-113 | VERNIER DEPTH GAGE_[527-113] | 1 | |
| 53-022-100 | 20-INCH GAGE BLOCK, COMPARATOR, RESOLUTION: 0.1 Μ IN. | 1 | |
| 571-100-20 | TIRE TREAD DEPTH GAGE SERIES 571 | 1 | |
| 644 | DIAL DEPTH GAGE, 0-3" RANGE, 0-100 DIAL, .001" GRADUATIONS | 1 | |
| 7210 | DIAL DEPTH GAGE 0-10MM | 9 | |
| 9093 | All Metal Drill Gage - #1-60 - MADE IN THE USA! | 1 | |
| 9095 | JUMBO All Metal Drill Gage - For 1/2" thru 1" Drills | 1 | |
| 59230 | CRIMPER CRIMP 16 GAGE. | 1 | |
| 060178 | Sensor Gaged MTX 160z | 1 | |
| 062516 | Sensor Gaged for SDX10i | 1 | |
| 063603 | Sensor Gaged for BMX10i | 1 | |
| 063606 | Sensor Gaged for BMX100i | 1 | |
| 063611 | Sensor Gaged for BMX100F | 1 | |
| 063614 | Sensor Gaged for BMX1000F | 1 | |
| 066581 | Sensor Gaged MTX 10z | 1 | |
| 231843 | PPG Semco 231843 14 Gage 12 Dark Green Sem-Luer Needles | 1 | |
| 231844 | PPG Semco 231844 14 Gage 1 Dark Green Sem-Luer Needles | 2 | |
| 231845 | PPG Semco 231845 15 Gage 12 Orange Sem-Luer Needle | 1 | |
| 231846 | PPG Semco 231846 15 Gage 1 Orange Sem-Luer Needle | 1 | |
| 231849 | PPG Semco 231849 18 Gage 12 Pink Sem-Luer Needle | 1 | |
| 231850 | PPG Semco 231850 18 Gage 1 Pink Sem-Luer Needle | 1 | |
| 231851 | PPG Semco 231851 19 Gage 12 Brown Sem-Luer Needle | 1 | |
| 231852 | PPG Semco 231852 19 Gage 1 Brown Sem-Luer Needle | 1 | |
| 231853 | PPG Semco 231853 20 Gage 12 Yellow Sem-Luer Needle | 1 | |
| 231854 | PPG Semco 231854 20 Gage 1 Yellow Sem-Luer Needle | 1 | |
| 231855 | PPG Semco 231855 21 Gage 12 Green Sem-Luer Needle | 1 | |
| 231856 | PPG Semco 231856 21 Gage 1 Green Sem-Luer Needle | 1 | |
| 231857 | PPG Semco 231857 22 Gage 12 Black Sem-Luer Needle | 1 | |
| 231859 | PPG Semco 231859 23 Gage 12 Light Blue Sem-Luer Needle | 1 | |
| 231860 | PPG Semco 231860 23 Gage 1 Light Blue Sem-Luer Needle | 1 | |
| 231863 | PPG Semco 231863 25 Gage 12 Blue Sem-Luer Needle | 1 | |
| 231864 | PPG Semco 231864 25 Gage 1 Blue Sem-Luer Needle | 1 | |
| 231866 | PPG Semco 231866 26 Gage 12 Peach Sem-Luer Needle | 1 | |
| 231867 | PPG Semco 231867 27 Gage 516 Tan Sem-Luer Needle | 1 | |
| 231869 | PPG Semco 231869 30 Gage 516 Lavender Sem-Luer Needle | 1 | |
| 232728 | PPG Semco 232728 14 Gage 1 Dark Green Sem-Flex Needle | 1 | |
| 232734 | PPG Semco 232734 18 Gage 2 Pink Sem-Flex Needle | 1 | |
| 232736 | PPG Semco 232736 20 Gage 1 Yellow Sem-Flex Needle | 1 | |
| 232742 | PPG Semco 232742 23 Gage 1 Light Blue Sem-Flex Needle | 1 | |
| 232748 | PPG Semco 232748 28 Gage 1 Tan Sem-Flex Needle | 1 | |
| 232749 | PPG Semco 232749 30 Gage 12 Lavender Sem-Flex Needle | 1 | |
| 232893 | PPG Semco 232893 26 Gage 18 Peach Sem-Flex Needle | 1 | |
| 282645 | GAGE - ACCELERATION LIMITER, FUEL CONTROL CRACK PRESSURE - GTCP85-129 ONLY | 7 | |
| 505056 | GAGE 10 GAUSS EMF | 5 | |
| 600373 | GAGE-FOR M/1-01 USE SEL. #3 | 1 | |
| 600375 | GAGE-FOR M/1-01 USE SEL. #5 | 1 | |
| 612179 | MULTIPURPOSE PIN CRIMPER 16 TO 22 GAGE. | 2 | |
| 612406 | GAGE (FOR 11545) | 1 | |
| 615716 | GAGE (M22520/3-1) | 1 | |
| 621052 | GAGE (M22520/3-5) FOR M/19-01 | 1 | |
| 621056 | GAGE (M22520/3-9) FOR M/5-100, /10-100 | 1 | |
| 621057 | GAGE (M22520/3-10) FOR M/5-100, /10-101 | 1 | |
| 621060 | GAGE (= TO M22520/3-13) | 1 | |
| 621061 | GAGE (= TO M22520/3-14) | 1 | |
| 621062 | GAGE (= TO M22520/3-15) | 1 | |
| 621068 | GAGE (MS3196-20) | 1 | |
| 621069 | GAGE (MS90414-1)FOR: 11707-1 | 1 | |
| 621070 | GAGE (MS3199-1) | 1 | |
| 621071 | GAGE (MS3196-20A) | 1 | |
| 621072 | GAGE (MS3196-16A) | 1 | |
| 621073 | GAGE (MS3196-12A) | 1 | |
| 621074 | GAGE (MS3196-3) | 1 | |
| 621081 | GAGE-FOR M/2-01 USE SEL.#4 | 1 | |
| 660000 | GAGE-FOR M/1-01 USE SEL. #1 | 1 | |
| 660001 | GAGE (MS3197-22X1) | 1 | |
| 660002 | GAGE (MS3197-22Y1) | 1 | |
| 660003 | GAGE (MS3197-20X1) | 1 | |
| 660005 | GAGE (MS3197-16X1) | 1 | |
| 660006 | GAGE (MS3197-16Y1) | 1 | |
| 660016 | GAGE (MS3197-24Y1) | 1 | |
| 660019 | GAGE-FOR M/1-01 USE SEL. #2 | 1 | |
| 660020 | GAGE-FOR M/1-01 USE SEL. #6 | 1 | |
| 660021 | GAGE-FOR M/1-01 USE SEL. #7 | 1 | |
| 660022 | GAGE-FOR M/1-01 USE SEL. #8 | 1 | |
| 660023 | GAGE-FOR M/2-01 USE SEL.#1 | 1 | |
| 660027 | GAGE-FOR M/2-01 USE SEL.#5 | 1 | |
| 660028 | GAGE-FOR M/2-01 USE SEL.#6 | 1 | |
| 660029 | GAGE-FOR M/2-01 USE SEL.#7 | 1 | |
| 660030 | GAGE-FOR M/7-01, USE SEL 4 | 1 | |
| 660031 | GAGE-FOR M/7-01, USE SEL 5 | 1 | |
| 660032 | GAGE-FOR M/7-01, USE SEL 6 | 1 | |
| 660033 | GAGE-FOR M/7-01, USE SEL 7 | 1 | |
| 660037 | GAGE-FOR A810-1 CRIMP TOOL | 1 | |
| 660039 | GAGE-FOR .415 HEX | 1 | |
| 660048 | GAGE-FOR TGV515 TOOL, SEL. #7 | 1 | |
| 1177697 | HAND BRAKE CABLE (FOR TLD BAGGAGE TRACTOR, MODEL: JST-30 S/L: T58941, T58942, T58943) | 1 | |
| 2004830 | model 5' x 10' closed baggage cart with knock down side option | 1 | |
| 2004831 | model 5' x 10' closed baggage cart with reinforced vinyl side curtains on both sides (one side can be closed at no charge). | 1 | |
| 2004872 | model 5' x 10' open baggage cart with removable end panels. | 1 | |
| 20161120 | GAGE 0- 10,000 | 1 | |
| 23002242 | GAGE, IND. 1ST STG BLADE TIP SHAKE | 1 | |
| 23060764 | Gage - 1st Stage NP Ceramic Blade Tracks | 1 | |
| 23060766 | Gage – Low Pressure Turbine 1st Stage Blade Track | 1 | |
| 60-1125-SW-02L-200PSI | DIFFERENTIAL PRESSURE GAGE (0 TO 300 PSIG (0 TO 2068 KPA), ±1% OF FULL SCALE) (ASHCROFT) | 1 | |
| 630129-GA | GAGE, FOR 630129 4.95MM | 1 | |
| 630129-GB | GAGE, FOR 630129 5.5MM | 1 | |
| 630130-GB | GAGE, FOR 630130 (.270 HEX) | 1 | |
| 630145-G | GAGE, FLAT, FOR .165 HEX | 1 | |
| 630147-1GA | GAGE, FOR 630147-2 | 1 | |
| 630147-2GB | GAGE, FOR 630147-2 | 1 | |
| 643J | DIAL DEPTH GAGES RANGE 0-.125" | 1 | |
| 643JZ | DIAL DEPTH GAGE, 1/8 | 11 | |
| 644JZ | 0-1" x .001" DIAL DEPTH GAGE | 5 | |
| 65425-101 | MASTER GAGE/ADAPTER ASSEMBLY 65425-101 | 1 | |
| 667-21 | GAGE FEELER 12" .021 | 1 | |
| 66MA | THICKNESS GAGE (20 LEAVES) 0.05-1MM | 1 | |
| 67514-101 | ENVELOPE GAGE, D31516-XXX | 1 | |
| 67515-101 | ENVELOPE GAGE, D31517-XXX | 1 | |
| 67808-101 | ENVELOPE GAGE, AFT DOOR D30665-( ) 67808-101 | 2 | |
| 67809-101 | A321 AFT SIDE & SLIDE/RAFTPACK ENVELOPE GAGE | 2 | |
| 6797161 | GAGE - 14TH STAGE COMP WHEEL PERMANENT | 1 | |
| 6T112X6 | LIFT-ALL 6" X 6 FT TYPE 1 ROUGHNECK WIRE MESH SLING - 12 GAGE - 4800 LBS WLL | 3 | |
| 6T212X6 | SLING - HOT BRAKE, TYPE 1, WIRE MESH, GALVANIZED HIGH CARBON;6 IN. WIDE, 12 GAGE, 6FT LONG MESH, 7FT LONG OVER ALL. | 3 | |
| 703A91-021 1-00 | SHACKLE, GAGE 16 | 1 | |
| 703A91-0211-00 | SHACKLE, GAGE 16 | 1 | |
| 703A91021101 | SHACKLE, GAGE 16 | 1 | |
| 7218S | 0 - 1" DIAL DEPTH GAGE | 2 | |
| 7572-3B | INSTALL TOOL, TANGLESS GAGE STYLE, 10-32 | 2 | |
| 831412-1 | SPLINE WEAR INDICATION KIT (CONSISTS OF 831412-11/-13/-15/ -17/-19/-21 GAGES) | 1 | |
| 856A 2410G01 | TOOL SET POSITION GAGE STAGE 1 LPT SHROUD | 1 | |
| 856A1068G02 | #179-- GAGE, LOCK LU | 11 | |
| 856A1118G02 | GAGE SET, SEATING - 1GB MODULE TO C/R SHAFT (SEATING GAGE SET) | 1 | |
| 856A1206G06 | GAGE, RUNOUT - CDP SEAL (110V / 220V/50HZ) (RUNOUT GAGE) | 9 | |
| 856A1259G04 | GAGE, SEATING CHECK - CORE MODULE TO 1GB (SEATING CHECK GAGE) | 3 | |
| 856A1260P01 | ID GAGE - HPCS STG 1/5 | 6 | |
| 856A1331 | GAGE,SET-IGV, STG. 1,2,3 CAR. STATOR VANE CLEVIS | 1 | |
| 856A1331 REV D | GAGE,SET-IGV, STG. 1,2,3 CAR. STATOR VANE CLEVIS | 1 | |
| 856A1331G04 | GAGE SET IGV STG 1/2/3 VSV CLV ASSY | 1 | |
| 856A1369 G04 | FIXTURE, ADAPTER LINI-GAGE - DATA ACQUISITION SYSTEM G01 | 5 | |
| 856A1388 | GAGE, SEATING CHECK - CORE MODULE TO 1GB (GAGE) | 1 | |
| 856A1388G01 | GAGE, SEATING CHECK - CORE MODULE TO 1GB (GAGE) | 6 | |
| 856A1434 | GAGE SET IGV , 123 | 1 | |
| 856A1441G02 | GAGE FLOW AREA 1 | 2 | |
| 856A1818G02 | GAGE, SEATING CHECK MM01 TO MM02 | 8 | |
| 856A2676 | CHECKING GAGE-CLEARANCE M01B LPT | 1 | |
| 856A2676G01 | CHECKING GAGE-CLEARANCE M01B LPT | 1 | |
| 856A2676G02 | CHECKING GAGE - M01B CLEARANCE LPT | 2 | |
| 856A2676G02 | CHECKING GAGE â M01B CLEARANCE LPT | 2 | |
| 856A2676G04 | CHECKING GAGE - M01B CLEARANCE LPT | 4 | |
| 856A2676G05 | CHECKING GAGE - M01B CLEARANCE LPT | 2 | |
| 856A2757 | GAGE POSITION STG 1 LPT SHROUD | 1 | |
| 856A2757G01 | POSITIONING GAGE - LPT SHROUD STG 1 | 4 | |
| 856A3244 | CHEKING GAGE-N 1 SPEED SENSOR | 1 | |
| 856A3244G03 | CHEKING GAGE-N1 SPEED SENSOR | 4 | |
| 856A3955 | GAGE BUCKLING CHECK LPT BLADES, STAGE 1 TO 4 | 1 | |
| 856A3955G01 | BUCKLING CHECKING GAGE - LPT BLADES STG 1/4 | 1 | |
| 856A3955G02 | BUCKLING CHECKING GAGE - LPT BLADES STG 1/4 | 2 | |
| 856A4618G02 | AREA GAGE MASTER - LPT NOZZLE STG1 | 1 | |
| 856A4638 | GAGE, BUCKLING CHECK - LPT BLADES 1-4 | 1 | |
| 856A4638G01 | BUCKLING CHECKING GAGE - LPT BLADES STG 1/4 | 1 | |
| 856A5522G01 | GAGE - NOTCH LPT BLADES STG1-4 | 4 | |
| 856A5522G02 | GAGE NOTCH BLADE TIP LPT STAGE 1-4 | 1 | |
| 856A5562G02 | BUCKLING INSPECTION GAGE - LPT BLADES STG1/4 | 3 | |
| 856A5590G01 | GAGE BOW CHECK LPT BLADES STAGES 1-4 | 1 | |
| 856A5618G02 | DIM INSP AREA GAGE - LPT NOZZLE STG1 | 1 | |
| 856A5632G01 | DIM INSP AREA GAGE MASTER - LPT NOZZLE STG1 | 1 | |
| 856A5711G03 | BUCKLE CHECKING GAGE - LPT BLADES STG 1/5 | 1 | |
| 856A5735G01 | AREA GAGE MASTER - LPT NOZZLE STG1 | 1 | |
| 856A5735G02 | AREA GAGE MASTER - LPT NOZZLE STG1 | 1 | |
| 856A5735G03 | AREA GAGE MASTER - LPT NOZZLE STG1 | 1 | |
| 856A5909G02 | GAGE, BUCKLING CHECK - LPT BLADES, STAGE 1-4 (CHECK GAGE) NOT ESSENTIAL TO START | 1 | |
| 856A5924G01 | DIM INSP AREA GAGE MASTER - LPT NOZZLE STG1 | 1 | |
| 856A5926G01 | DIM INSP AREA GAGE - LPT NOZZLE STG1 | 1 | |
| 856A6629G03 | GAGE, DOVE TAIL SLOT 0~0.015IN | 10 | |
| 856A6710 | (RT) GAGE BUCKLING CHECK LPT BLADES. STAGES 1 TO 4 | 1 | |
| 856A6710G03 | GAGE SET, BUCKLING CHECK - LPT BLADES STAGES 1 THRU 4 | 1 | |
| 856A6755G01 | DIM INSP AREA GAGE MASTER - LPT NOZZLE STG1 | 1 | |
| 856A6755G02 | DIM INSP AREA GAGE MASTER - LPT NOZZLE STG1 | 1 | |
| 856A6757G03 | DIM INSP AREA GAGE - LPT NOZZLE STG1 | 1 | |
| 88-100 | Gage Set for AF8, M22520/1-01 | 4 | |
| 88-200 | Gage Set for AFM8, M22520/2-01 | 2 | |
| 88-300BT | Gage Set for M300BT-Go/No-Go Sel 1-8 | 2 | |
| 88-309 | Gage Set for M309-Go/No-Go Sel 1-8 | 2 | |
| 88-700 | Gage Set for MH860, M22520/7-01 | 2 | |
| 88-800 | Gage Set for MH800-Go/No-Go Sel 1-8 | 2 | |
| 8813435200 | DIAL GAGE SUPPORT1 | 2 | |
| 8C2768 | GAGE - SEATING - STG 1 HANGER PIN | 1 | |
| 90-PG6000 | Bowers 90-PG6000 Gagemaker Internal Thread Roll Gauge 2 1/2" Reach Range 1 1/2 - 9" | 1 | |
| 90-PG6001 | Bowers 90-PG6001 Gagemaker Internal Thread Roll Gauge 2 1/2" Reach Range 9 - 16" | 1 | |
| 90-PG6002 | Bowers 90-PG6002 Gagemaker Internal Thread Roll Gauge 2 1/2" Reach Range 16 - 24" | 1 | |
| 90-RG7001 | Bowers 90-RG7001 Gagemaker External Thread Roll Gauge Range 4-8" | 1 | |
| 90-RG7002 | Bowers 90-RG7002 Gagemaker External Thread Roll Gauge Range 8-12" | 1 | |
| 90-RG7003 | Bowers 90-RG7003 Gagemaker External Thread Roll Gauge Range 12-16" | 1 | |
| 90-RG7004 | Bowers 90-RG7004 Gagemaker External Thread Roll Gauge Range 16-20" | 1 | |
| 90-SPG6000 | Bowers 90-SPG6000 Gagemaker Internal Thread Roll Gauge 1" Reach Range 5/8 - 1 1/2" | 1 | |
| 90-TP-11.5V | Bowers Thread Profile Gage 11½" V API Line Pipe | 1 | |
| 90-TP-3-1.25-84 | Bowers Profile Gage 2 3/8" - 3 1/2" Hughes | 1 | |
| 90-TP-3.5-2-50 | Bowers Profile Gage 3 1/2" - 6 5/8" Hughes H-90 | 1 | |
| 90-TP-4-1.5-76 | Bowers Profile Gage 2 3/8" - 3 1/2" P.A.C. | 1 | |
| 90-TP-4-3-50 | Bowers Profile Gage 5 1/2", 7 5/8" & 8 5/8" | 1 | |
| 90-TP-5-3-40 | Bowers Profile Gage 2 3/8" - 4 1/2" API REG | 1 | |
| 90-TRA-10P | Bowers 90-TRA-10P Gagemaker Thread Roll ACME 10 Pitch (Set of 2) | 1 | |
| 90-TRA-12P | Bowers 90-TRA-12P Gagemaker Thread Roll ACME 12 Pitch (Set of 2) | 1 | |
| 90-TRA-14P | Bowers 90-TRA-14P Gagemaker Thread Roll ACME 14 Pitch (Set of 2) | 1 | |
| 90-TRA-16P | Bowers 90-TRA-16P Gagemaker Thread Roll ACME 16 Pitch (Set of 2) | 1 | |
| 90-TRA-18P | Bowers 90-TRA-18P Gagemaker Thread Roll ACME 18 Pitch (Set of 2) | 1 | |
| 90-TRB74510P | Bowers 90-TRB74510P Gagemaker Thread Rolls 10mm Pitch | 1 | |
| 90-TRB74512P | Bowers 90-TRB74512P Gagemaker Thread Rolls 12mm Pitch | 1 | |
| 90-TRB74516P | Bowers 90-TRB74516P Gagemaker Thread Rolls 16mm Pitch | 1 | |
| 90-TRME-15P | Bowers 90-TRME-15P Gagemaker Thread Roll External Metric 1.5mm Pitch | 1 | |
| 90-TRME-175P | Bowers 90-TRME-175P Gagemaker Thread Roll External Metric 1.75mm Pitch | 1 | |
| 90-TRMI-15P | Bowers 90-TRMI-15P Gagemaker Thread Roll Internal Metric 1.5mm Pitch | 1 | |
| 90-TRMI-175P | Bowers 90-TRMI-175P Gagemaker Thread Roll Internal Metric 1.75mm Pitch | 1 | |
| 90-TRSA-10P | Bowers 90-TRSA-10P Gagemaker Thread Roll Stub ACME 10 Pitch | 1 | |
| 90-TRSA-12P | Bowers 90-TRSA-12P Gagemaker Thread Roll Stub ACME 12 Pitch | 1 | |
| 90-TRSA-14P | Bowers 90-TRSA-14P Gagemaker Thread Roll Stub ACME 14 Pitch | 1 | |
| 90-TRSA-16P | Bowers 90-TRSA-16P Gagemaker Thread Roll Stub ACME 16 Pitch | 1 | |
| 90-TRSA-18P | Bowers 90-TRSA-18P Gagemaker Thread Roll Stub ACME 18 Pitch | 1 | |
| 90-TRVE-10P | Bowers 90-TRVE-10P Gagemaker Thread Roll External 10 Pitch | 1 | |
| 939-2 | 02 SYSTEM TEST EQUIPMENT PRESSURE GAGE (0 TO 100 PSI) (MM 35-00-00 / 20-52-00) | 2 | |
| 9429M94P01 | (LINIGAGE SYSTEM, 120V); W/WINDOWS-BASED LGWAS & (1) 20' 5506-1800 PROBE | 1 | |
| 9446M10P01 | PROBE, RUNOUT-LINI GAGE (PROBE) P01 | 1 | |
| 95-93032-0005 | RIGGING FEELER GAGES, RUDDER, ELEVATOR AND ROLL CONTROL - SUPPORT EQUIPMENT AND TOOLS DATA 95-93032-0001 | 1 | |
| 956A8597 | GAGE - ALIGNMENT - LPT NOZZLE STG 1 - SEGMENT | 1 | |
| 98A52107632000 | GAGE-THICKNESS, PAINT BORER 518 | 26 | |
| 98D27504008000 | #S01#GAGE | 26 | |
| 98F27508206210 | GO-NOGO GAGE TRACK1,4 +5 | 1 | |
| 98F27808205002 | CENTER-GAGE-SLAT, TR.16 (A340-500/600) | 1 | |
| 98F27808205003 | CHECK-GAGE-SLAT, TR. 16 (A340-500/600) | 1 | |
| 9C1022G01 | DEPTH GAGE_(0.5 ~ 6) INCH_[9C1022G01] | 1 | |
| 9C1666 | GAGE TUBE, OIL 1-2 BRG. | 1 | |
| A-305183 | REMOVAL TOOL 18 AND 20 GAGE AMP RECTANGULAR PLUGS. | 1 | |
| A005414D | CART - BAGGAGE - 60 INCH X 120 INCH OPEN STYLE WITH REMOVABLE END PANELS - 8,000 LB CAPACITY | 1 | |
| A1290-3G | GAGE (A1290-3, AP1290-3) | 1 | |
| A1290-4G | GAGE (FOR A1290-4, AP1290-4) | 1 | |
| A1290-6G | GAGE (FOR A1290-6) | 1 | |
| A1290-SP11G | GAGE (AP1290-SP11) OBSOLETE | 1 | |
| A1290-SP1G | GAGE (AP1290-SP1) OBSOLETE | 1 | |
| A1290-SP2G | GAGE (AP1290-SP2) OBSOLETE | 1 | |
| A1290-SP3G | GAGE (AP1290-SP3) OBSOLETE | 1 | |
| A1290-SP4G | GAGE (AP1290-SP4) OBSOLETE | 1 | |
| A1290-SP5G | GAGE (AP1290-SP5) OBSOLETE | 1 | |
| A1290-SP7G | GAGE (AP1290-SP7) OBSOLETE | 1 | |
| A1290-SP8G | GAGE (AP1290-SP8) OBSOLETE | 1 | |
| A27062-12 | GAGE ASSEMBLY (4 IT) & (EQ A27062-1A) | 1 | |
| A768-210-30 | DIAL INDICATING PRESSURER GAGE (NSN 6685013269186) | 1 | |
| AEM1610 | 14PC BLD VLV LSH GAGE SET | 1 | |
| AEM210423008 | STEP GAGE .004-.008/1/2X3/1/2L | 1 | |
| AGE-01098-001 | WRENCH-ADJ, BAGGAGE DOOR ECCENTRIC P/N AGE-01098-001 | 4 | |
| AGM06001 | GAGE (EQUIVALENT TO M22520/6-001) | 1 | |
| AGM06010 | GAGE (EQUIVALENT TO M22520/6-010) | 1 | |
| AGM06011 | GAGE (EQUIVALENT TO M22520/6-011) | 1 | |
| AGM06013 | GAGE (EQUIVALENT TO M22520/6-013) | 1 | |
| AGM06014 | GAGE (EQUIVALENT TO M22520/6-014) | 1 | |
| AGM06015 | GAGE (EQUIVALENT TO M22520/6-015) | 1 | |
| AGM06016 | GAGE (EQUIVALENT TO M22520/6-016) | 1 | |
| AGM06017 | GAGE (EQUIVALENT TO M22520/6-017) | 1 | |
| AGM06019 | GAGE (EQUIVALENT TO M22520/6-019) | 1 | |
| AGM06031 | GAGE (EQUIVALENT TO M22520/6-031) | 1 | |
| AMT23010L | LOCATOR (M22520/23-10) 6 GAGE | 1 | |
| AMT23011L | LOCATOR (M22520/23-11) 4 GAGE | 1 | |
| AMT23013L | LOCATOR (M22520/23-13)1/0 GAGE | 1 | |
| AMT23101DA | GAGE 10 | 1 | |
| AMT23102L | LOCATOR, 10 GAGE | 1 | |
| AMT23113L | LOCATOR, 1/0 GAGE | 1 | |
| AMT23115L | LOCATOR, 12 GAGE | 1 | |
| AMT23153L | LOCATOR, 10-12 GAGE | 1 | |
| AMT23154DA | DIE ASSEMBLY, 12 GAGE, SPECIAL | 1 | |
| AMT23168DA | DIE ASSEMBLY, 12 GAGE | 1 | |
| AMT23170DA | DIE ASSEMBLY, 16 GAGE | 1 | |
| AMT23223L-BX | LOCATOR, 8 GAGE (=10-589525-8) | 1 | |
| AMT23225L | LOCATOR, 16 GAGE | 1 | |
| AMT23263L | GAGE 10 | 1 | |
| AMT23264DA | DIE ASSEMBLY, 10 GAGE | 1 | |
| AMT23265DA | DIE ASSEMBLY, 10 GAGE | 1 | |
| AMT23293L | LOCATOR, 10 GAGE | 1 | |
| AMT23447L | LOCATOR, #8 & 10 GAGE | 1 | |
| AMTG1801 | GAGE-M22520/18-01 | 1 | |
| AMTG23100 | GAGE-FOR AMT23100DA | 1 | |
| AMTG23101 | GAGE-FOR AMT23101DA | 1 | |
| AMTG23118 | GAGE-FOR AMT23118DA | 1 | |
| AMTG23130 | GAGE-FOR AMT23130DA | 1 | |
| AMTG23138 | GAGE-FOR AMT23138DA | 1 | |
| AMTG23140 | GAGE-FOR AMT23140DA | 1 | |
| AMTG23168 | GAGE-FOR AMT23168DA | 1 | |
| AMTG23170 | GAGE-FOR AMT23170DA | 1 | |
| AMTG23184 | GAGE-FOR AMT23184DA | 1 | |
| AMTG23197 | GAGE-FOR AMT23197DA | 1 | |
| AMTG23198 | GAGE-FOR AMT23198DA | 1 | |
| AMTG23199 | GAGE-FOR AMT23199DA | 1 | |
| AMTG4301 | Gage Go/No-Go Size 22-16 - M22520/43-01 | 2 | |
| AMTG4302 | Gage Go/No-Go Size 16-14 - M22520/43-02 | 2 | |
| AMTG4303 | Gage Go/No-Go Size 22-16 - M22520/43-03 | 2 | |
| AMTG4304 | Gage Go/No-Go Size 16-14 - M22520/43-04 | 2 | |
| AP1290-11G | GAGE (FOR AP1290-11) | 1 | |
| AP1290-12G | GAGE (FOR AP1290-12) | 1 | |
| ASHCROFIT 1008 | ASHCROFIT GAGE 0-10,000 | 1 | |
| ASHCROFT 0-100 | ASHCROFT 0-100 PSI GAGE TO 2C14711G01 | 1 | |
| AT 0012 | CONTACT GAGE (12 GA.) | 1 | |
| AT 0016 | CONTACT GAGE (16 GA.) | 1 | |
| AT1020 | INSERTION TOOL 16 GAGE DEUTSCH ENGINE INSTALLATION PLUGS. | 2 | |
| ATA 1102 | INSERTION TOOL, 16 GAGE | 1 | |
| ATBL 1161 | INSERTION TOOL, 12 GAGE | 1 | |
| ATBO 1105 | TWEEZER, INSERTION (16 GAGE) | 1 | |
| ATBO 2105 | TWEEZER, REMOVAL (16 GAGE) | 1 | |
| ATBO 2160 | TWEEZER, REMOVAL (12 GAGE) | 1 | |
| ATBX 1-6781 | PLIER, INSERTION, 16 GAGE | 1 | |
| ATBX 1-7082 | PLIER, INSERTION, 12 GAGE | 1 | |
| ATBX 1-7345 | PLIER, INSERTION, 16 GAGE | 1 | |
| ATBX 1-8107-16 | PLIER, INSERTION, 16 GAGE | 1 | |
| ATBX 1154 | INSERTION TOOL, 12 GAGE | 1 | |
| ATC-3076 | RETENTION TEST TOOL 16 GAGE | 3 | |
| ATC-3077 | RETENTION TEST TOOL 12 GAGE | 3 | |
| ATD 1035-135 | INSERTION TOOL 22 GAGE DEUTSCH TSE 10 TO 22 SPLICE. | 1 | |
| ATD1035 | INSERTION TOOL 22 GAGE DEUTSCH TSE 10 TO 22 SPLICE. | 2 | |
| ATGH 1106 | TWEEZER, INSERTION, 16 GAGE | 1 | |
| ATGH 2102 | TWEEZER, REMOVAL 16 GAGE | 1 | |
| ATGH 2106 | INSERTION/REMOVAL TOOL, 16 GAGE | 1 | |
| ATGH 2111 | TWEEZER, REMOVAL 16 GAGE | 1 | |
| ATK6000 | GAGE KIT (MS3196-2) | 1 | |
| ATR1080 | INSERTION TOOL 20 GAGE DEUTCSH TSE10-20 SPLICE. | 3 | |
| ATRD 5153 | INSERTION TOOL, TWEEZER, 12 GAGE | 1 | |
| ATRD 6153 | REMOVAL TOOL, TWEEZER, 12 GAGE | 1 | |
| B27039-28 | RIGGING EQUIPMENT - CONTROL INSTALLATION, ELEVATOR AND STABILIZER TRIM SYSTEMS - 757,RIGGING EQPT - GAGE (B27039-3 ASSY INCLUDED IN B27039-28 EQPT) (GDC10117) | 9 | |
| BAR 0-6 | GAGE 0-6 TO 2C14711G01 | 1 | |
| BG200 | DIGITAL FORCE GAGE 1000 N; 0.5 N | 1 | |
| BGP10S | ENERPAC GAGE 0-10,000 PSI | 1 | |
| BLOCK GAGE | 81PC SHOP GR ECONOMY RECT SPI GAGE BLOCK SET | 1 | |
| C32004-5 | GAGE ASSY GRP 1 | 1 | |
| C32051-1 | SET, GAGE - HYDRAULIC BRAKE SYSTEM, PRESSURE CHECKING_WEIGHT : 75 LBS, DIMENSION : 16 X 27 X 28” | 8 | |
| CAFG-61-1-.3895 | 1ST GO/NOGO GAGE | 1 | |
| CAFG-61-1-.3920 | 1ST GO/NOGO GAGE | 1 | |
| CAG-61 | 1ST O.S. COMB GAGE | 1 | |
| CAI60412 | GAGE DIAL DEPTH 0-.125IN0-25-0 | 1 | |
| CAI60412J | GAGE DIAL DEP 0 .125IN 0 25 0 | 1 | |
| CAMG-6 | 1ST O.S. MANDREL GAGE | 1 | |
| CAR-40-1-.2495-CBD | GAGE FINISH REAMERS, REF: FTI, P/N: CAR-40-1-.2495 | 1 | |
| CB3G-6-0-N-1 | FATIGUE CB3G-6-0-N-1 ASSEMBLY, COMBINATION GAGE | 1 | |
| CBG-10-0-N-1 | COMBINATION GAGE1 | 3 | |
| CBG-14-0-N-1 | Combination Gage 14-0-N | 1 | |
| CBG-14-3-N-1 | Combination Gage 14-3-N | 3 | |
| CBG-6-1-N-1 | COMBINATION GAGE 1ER OVZ | 5 | |
| CBG-8-2-N-1 | COMBINATION GAGE 2DO OVZ 1/4 | 2 | |
| CBMG-12-3-N | MANDREL GAGE CBMG-12-3-N (0.4014INCH) | 3 | |
| CBMG-14-0-N | MANDREL GAGE 14-0-N | 1 | |
| CBMG-14-3-N | MANDREL GAGE 14-3-N | 3 | |
| CBMG-16-2-N-1 | MANDREL GAGE PER COLD WORKING DIAM 17/32" CLASSE I | 1 | |
| CBMG-4-4-N | GAGE, MANDREL CHECK(0,1648) | 3 | |
| CBMG-6-0-N | GAGE, MANDREL CHECK (0.1734) | 3 | |
| CBMG-6-1-N | MANDREL GAGE 1ER OVZ | 4 | |
| CBMG-8-2-N | GAGE, MANDREL CHECK (0.2611) | 4 | |
| CBMG10-2N | GAGE, MANDREL CHECK (0.3213) | 2 | |
| CBMG4-2N | GAGE, MANDREL CHECK (0.13) | 1 | |
| CBMG4-4N | GAGE, MANDREL CHECK (0.16) | 3 | |
| CBMG6-1N | GAGE, MANDREL CHECK (0.18) | 4 | |
| CBR-10-0-N-1 | GAGE REAMER .3100/.3070 | 1 | |
| CBR-14-0-N-1-**** | GAGE FINISH REAMER (KIT STDN 14-0-N) | 1 | |
| CBR-14-0-N-1-.4520 | REAMER, GAGE FINISH 14-0-N | 1 | |
| CBR-4-2-N-1 | GAGE REAMER .1610/.1590 | 1 | |
| CBR-4-2-N-RA-.1590 | RIGHT ANGLE GAGE FINISH REAMER (0.1580" - 0.1600") | 1 | |
| CBR-4-4-N-1 | GAGE REAMER .1870/.1850 | 1 | |
| CBR-4-4-N-1-1875 | GAGE FINISH REAMER (ORIGINAL PN:CBR-4-4-N-1-.1875) | 1 | |
| CBR-4-4-N-RA-.1770 | RIGHT ANGLE GAGE FINISH REAMER (0.1760" - 0.1780") | 1 | |
| CBR-6-0-N-1 | GAGE REAMER .1870/.1850 | 1 | |
| CBR-6-0-N-RA-.1850 | RIGHT ANGLE GAGE FINISH REAMER (0.184" - 0.186") | 2 | |
| CBR-6-1-N-1 | GAGE REAMER .2010/.1990 | 1 | |
| CBR-6-1-N-RA-.1995 | RIGHT ANGLE GAGE FINISH REAMER (0.199" - 0.201") | 1 | |
| CBR-6-2-N-1 | GAGE REAMER .2319/.2294 | 1 | |
| CBR-6-2-N-RA-.2150 | RIGHT ANGLE GAGE FINISH REAMER (0.215" - 0.216") | 1 | |
| CBR-6-3-N-1 | GAGE REAMER .2319/.2294 | 1 | |
| CBR-8-1-N-RA-.2620 | RIGHT ANGLE GAGE FINISH REAMER (0.261" - 0.263") | 1 | |
| CGF-10X-3B | KATO GAGE WORKING 3B SIZE 5/8-18 | 1 | |
| CGF-3X-3B | KATO TANGLESS GAGE WORKING 3B SIZE 10-32 REF. CGF-3X-3B | 1 | |
| CGF-4X-3B | KATO TANGLESS GAGE WORKING 3B SIZE 1/4-28 REF. CGF-4X-3B | 1 | |
| CGF-5X-3B | KATO TANGLESS GAGE WORKING 3B SIZE 5/16-24 REF. CGF-5X-3B | 1 | |
| CGF-7X-3B | KATO TANGLESS GAGE WORKING 3B SIZE 7/16-20 | 1 | |
| CGF-8X-3B | KATO TANGLESS GAGE WORKING 3B SIZE 1/2 -20 | 1 | |
| CM_*5000PSI | PRESSURE GAGE 5000 PSI ACCY: ±0.1%FS | 1 | |
| CODENO.514-105 | HS-18 (HS45) HEIGHTGAGE "Mitutoyo" | 1 | |
| COM-1557 | GAGE,ASSY-PUSH-PULL - 0-150N | 2 | |
| CXORK-1C | KIT CXORK-1C AND INITAL HOLE GAGE AND FINAL HOLE GAGE | 1 | |
| D-4000 | FEDERAL DIMENSION AIR GAGE ( WITH SETTING RING ADN AIR PLUG) OR EQUIVALENT 1.1268 SETTING RING 1.1268 AIR PLUG | 1 | |
| D12-9892-10 | INSPECTION GAGE 10 | 5 | |
| D12-9892-12 | INSPECTION GAGE 12 | 3 | |
| D12-9892-16 | INSPECTION GAGE 16 | 1 | |
| DBS-2102 | Hand Operated .250 Wide One-Step Band Application Tool M81306/1A with Gage and Tension Key | 2 | |
| DBS-2202 | Hand Operated .125 Wide One-Step Mini-Band Application Tool M81306/1B with Gage and Tension Key | 2 | |
| DBS-CG2A | M81306/2-01E Verification Set which includes DBS-CG2 and G691 Gage | 2 | |
| DBS-CG3A | M81306/2-02F Verification Set which includes DBS-CG3 and G752 Gage | 2 | |
| DBS-CG7 | VERIFICATION INSPECTION GAGE FOR DBS-2100 | 3 | |
| DEM-18 | VERNIER DEPTH GAGE_17INCHES_[DEM-18] | 1 | |
| DEM18 | DEPTH GAGE_(0 ~ 20) INCH, 0.001 INCH_[DEM18] | 1 | |
| DFE 200 | FORCE GAGE (0 - 100 LB) (OR EQUIVALENT) | 2 | |
| DFS2-250G | GAGE - GRAM, APPROX. 40 - 350 GRAM FORCE CAPACITY, /- 0.1% | 2 | |
| DG-100 | TOOL GAGE DPPH100 PUSH PULL | 1 | |
| DG-200 | GAGE - FORCE, DIGITAL (0 TO 100 LBS) | 11 | |
| DGB1 | DIGITAL PRESSURE GAGE_0 ~ 10000 PSI (10) ±0.5 %_[DGB1] | 1 | |
| DGD-2 | Gage - Gram, 2.5-15 Gram Force, +/-2% | 1 | |
| DGSLG10 | ANALOG FORCE GAGE 10LB | 1 | |
| DIN-7280 | 124127999 WET FILM GAGE | 1 | |
| DMC199 | DMC199 - MH860 with Postioner & Gage Tool Kit | 2 | |
| DP6328 | Starrett 1015MB-100 DIAL THICKNESS GAGE | 1 | |
| DPG-102 | DIGITAL PRESSURE GAGE 0-15 PSI; 0.25 | 2 | |
| DPP-500G | DIAL P/P GAGE_26.5X13X7.5CM,0~500GRAMS_[DPP-500G] | 1 | |
| DPPH-100 | GAGE - DIAL PUSH/PULL, 0-100 LBS | 2 | |
| DPPH-150 | GAGE - PUSH/PULL 150 LBS CAPACITY | 3 | |
| DPPH100 | TOOL GAGE DPPH100 PUSH PULL | 2 | |
| DPPH150 | PUSH-PULL GAGE (150 LB.) | 3 | |
| DPS-0.5 | DIGITAL FORCE GAGE 0-5 N (0.001) 0-500 G (0.1) | 1 | |
| DR9415 | Starrett S3089MZ-181-160J BORE GAGE | 1 | |
| DS 150K1 | GAGE - FORCE, WITH RESOLUTION OF 0.15-LB OR BETTER, COM-4907 | 1 | |
| DS2-110 | Digital Force Gage - 110 lbs. x .1 lb. | 3 | |
| E1440 | DIAL GAGE 2.5" 0-160 PSI CENTRAL CONNECTION 1/4NPT | 1 | |
| ES750-51 | GAGE-PDU1 WEAR | 16 | |
| EUS309-G1 | GAGE, ROUND, FOR EUS309, APC309 SEL #1 | 1 | |
| F70284-1 | SPL-1625 Wear Gage Set - Ground Power Plug and Receptacle 737-600, -700, -800 | 28 | |
| F72977-47 | Gage Equipment -Hydraulic Brake System Pressure Checking (Repl. By C32051) | 5 | |
| F72977-62 | Gage Equipment -Hydraulic Brake System Pressure Checking (Repl. By C32051) | 16 | |
| F80179-6-CM | 14 GAGE 304 SERIES SS | 1 | |
| F80198-14 | PLUG GAGE - NOSE LANDING GEAR NUT (F80198-18 IS INCLUDED IN THE KITF80198-14) | 12 | |
| FB-310B | FEELER GAGE_(0.001 ~ 0.015) INCH_[FB-310B] | 4 | |
| FB-325A | FEELER GAGE_0.0015"~0.025"_[FB-325A] | 8 | |
| FB-335 | GAGE,THICKNESS:STRAIGHT,3.312" BLADE LG | 6 | |
| FB310B | 13 US/MET FLR GAGE-.001-.015IN | 4 | |
| FB316B | 18SPK/IGN FLR GAGE(.010-.035") | 3 | |
| FB325A | FEELER GAGE_0.0015"~0.025"_[FB-325A] | 8 | |
| FB335 | 35 US/MT FLR GAGE .0015-035IN | 6 | |
| FB3355 | GAGE,THICKNESS:STRAIGHT,3.312" BLADE LG | 1 | |
| FBL4 | FEELER GAGE_0.005(4), 0.008(4), 0.010(4), 0.015(4)_[FBL4] | 1 | |
| FBM320 | FEELER GAGE - NUMBER OF BLADES: 20 BLADES SIZE: 0.05 - 1MM INCREMENT:0.05MM | 3 | |
| FDIX 100 | GAGE - FORCE, DIGITAL (0 TO 100 LBS) | 6 | |
| FDIX100 | GAGE-FORCE,DIGITAL- 0 TO 100 LBS | 6 | |
| FDK-10 | GAGE, FORCE, PUSH/PULL, 10 LB | 1 | |
| FFL72646400 | 1.4IN-6IN DIAL BORE GAGE | 1 | |
| FFL74554630 | 0?6IN/150MM OUTSD CALIP GAGE | 1 | |
| FMG-647-30010-B | GAGE, MANDREL CHECK (1.6859) | 1 | |
| FSG-1501-35010A | FORCEMATE STARTING HOLE GAGE, NOMINAL (CLASS 1) | 1 | |
| FSG-1501-35110A | FORCEMATE STARTING HOLE GAGE, 1ST OVERSIZE (CLASS 2) | 1 | |
| FSG-1911-35110A | STARTING HOLE GAGE, 1ST OVERSIZE | 1 | |
| FTE-01-35-32000 | ELEVATOR SETTING GAGE STA.1890 | 1 | |
| FTE-04-35-34000 | RUDDER SETTING GAGE STA.1362.5 | 1 | |
| FTE01-35-13000-1/2 | INNER FLAP SETTING GAGE STA.1600 | 1 | |
| FTG-3-1-3 | COMBINATION GAGE1 | 1 | |
| FTG-483-A-1-1 | COMBINATION GAGE, FORCETEC MANDREL (1ST OVER) | 1 | |
| FTG-483-A-2-1 | COMBINATION GAGE, FORCETEC MANDREL (1ST OVER) | 1 | |
| FTMG-483-A-0 | GAGE, MANDREL CHECK (0.2471) | 1 | |
| FZDG-4 | BRILES GAGE 1/8 | 1 | |
| G1001 | Gage - GO .0360 - NO-GO .0410 for M309 | 2 | |
| G1004 | Gage - GO .0610 - NO-GO .0660 for M309 | 2 | |
| G1006 | Gage - GO .0760 - NO-GO .0810 for M309 | 2 | |
| G1008 | Gage - GO .1000 - NO-GO .1100 for M309 | 4 | |
| G1016 | Gage - GO .1490 - NO-GO .1530 | 2 | |
| G1047 | Gage- GO .1190 – NO-GO .1250 | 2 | |
| G1122 | GAGE, GO/NO-GO M22520/39-03 GMT1090 | 2 | |
| G1150 | GAGE GO.1110 - NO-GO.1190- Use w/ HD51-114N & -118N | 2 | |
| G1151 | GAGE GO.1220 - NO-GO.1300- Use w/ HD51-115N & -119N | 2 | |
| G1152 | GAGE- GO.1270 - NO-GO.1350- Use w/ HD51-116N & -120N | 2 | |
| G1153 | GAGE- GO.1860 - NO-GO.1940- Use w/ HD51-117N & -121N | 2 | |
| G1154 | GAGE GO.2710 - NO-GO.2790 - Use w/ HD51-122N & -123N | 2 | |
| G1155 | Gage - GO .3160 - NO-GO .3240 - Use w/ HD51-124N & -125N | 2 | |
| G120 | Gage - GO .0960 - NO-GO .1000 - M22520/3-2 | 2 | |
| G125 | Gage - GO .0390 - NO-GO .0440 - M22520/3-1 | 10 | |
| G1261 | Gage GO .1490 - NO-GO .1530 | 2 | |
| G140 | Gage - GO .1420 - NO-GO .1460 | 2 | |
| G145 | Gage - GO .0410 - NO-GO.0460 - M22520/3-3 | 2 | |
| G1459 | GAGE GO .1450 NO GO .1490 | 1 | |
| G150 | Gage - GO .1015 - NO-GO .1085 - M22520/6-001 | 2 | |
| G155 | Gage - GO .1245 - NO-GO .1315 - M22520/6-003 | 2 | |
| G160 | Gage - GO .0645 - NO-GO .0715 - M22520/6-029 | 2 | |
| G170 | Gage - GO .2515 - NO-GO.2585 - M22520/6-011 | 2 | |
| G1720-5 | Gage - GO .0510 - NO-GO .0580 | 2 | |
| G175 | Gage - GO .3395 - NO-GO .3465 - M22520/6-018 | 2 | |
| G180 | Gage - GO .2095 - NO-GO .2165 - M22520/6-008 | 2 | |
| G185 | Gage - GO .1745 - NO-GO .1815 - M22520/6-006 | 2 | |
| G186 | Gage - GO .1145 - NO-GO .1215 - M22520/6-002 | 2 | |
| G187 | Gage - GO .1475 - NO-GO .1545 - M22520/6-004 | 2 | |
| G188 | Gage - GO .1565 - NO-GO .1635 - M22520/6-005 | 2 | |
| G189 | Gage - GO .1935 - NO-GO .2005 - M22520/6-007 | 2 | |
| G190 | Gage - GO .2145 - NO-GO .2215 - M22520/6-009 | 2 | |
| G191 | Gage - GO .2275 - NO-GO .2345 - M22520/6-010 | 2 | |
| G192 | Gage - GO .2595 - NO-GO .2665 - M22520/6-012 | 2 | |
| G193 | Gage - GO .2645 - NO-GO .2715 - M22520/6-013 | 2 | |
| G194 | Gage - GO .2865 - NO-GO .2935 - M22520/6-014 | 2 | |
| G195 | Gage - GO .3055 - NO-GO .3125 - M22520/6-015 | 2 | |
| G196 | Gage - GO .3105 - NO-GO .3175 - M22520/6-016 | 2 | |
| G197 | Gage - GO .3205 - NO-GO .3275 - M22520/6-017 | 2 | |
| G198 | Gage - GO .3555 - NO-GO .3625 - M22520/6-019 | 2 | |
| G200 | Gage - GO .3975 - NO-GO .4045 - M22520/6-021 | 2 | |
| G203 | Gage - GO .4715 - NO-GO .4785 - M22520/6-025 | 2 | |
| G206 | Gage - GO .1345 - NO-GO .1415 - M22520/6-028 | 2 | |
| G208 | Gage - GO .0965 - NO-GO .1035 - M22520/6-031 | 2 | |
| G213 | Gage - GO .0130 - NO-GO .0180 | 2 | |
| G214 | Gage - GO .0160 - NO-GO .0210 | 2 | |
| G215 | Gage - GO .0190 - NO-GO .0240 | 2 | |
| G217 | Gage - GO .0260 - NO-GO .0310 | 2 | |
| G222 | Gage - GO .0360 - NO-GO .0410 | 2 | |
| G228 | Gage - GO .0160 - NO-GO .0210 | 2 | |
| G229 | Gage - GO .0190 - NO-GO .0240 | 2 | |
| G236 | Gage - GO .0410 - NO-GO .0460 | 2 | |
| G247 | Gage - GO .1080 - NO-GO .1180 | 2 | |
| G248 | Gage - GO .0140 - NO-GO .0160 | 2 | |
| G249 | Gage - GO .0170 - NO-GO .0190 | 2 | |
| G252 | Gage - GO .0310 - NO-GO .0330 | 2 | |
| G255 | Gage - GO .1025 - NO-GO .1065 | 2 | |
| G259 | Gage - GO .1480 - NO-GO .1510 - M22520/3-7 | 2 | |
| G260 | Gage - GO .1210 - NO-GO .1240 - M22520/3-8 | 2 | |
| G261 | Gage - GO .1320 - NO-GO .1400 - M22520/3-9 | 2 | |
| G262 | Gage - GO .0960 - NO-GO .1040 - M22520/3-10 | 2 | |
| G263 | Gage - GO .0660 - NO-GO .0740 - M22520/3-11 | 2 | |
| G264 | Gage - GO .0640 - NO-GO .0720 - M22520/3-12 | 2 | |
| G265 | Gage - GO .0430 - NO-GO .0510 - M22520/3-13 | 2 | |
| G266 | Gage - GO .0250 - NO-GO .0330 - M22520/3-14 | 2 | |
| G275 | Gage - GO .1255 - NO-GO .1305 with Flats | 2 | |
| G276 | Gage - GO .1025 - NO-GO .1075 | 2 | |
| G278 | Gage - GO .1220 - NO-GO .1280 | 2 | |
| G281 | Gage - GO .3098 - NO-GO .3140 - MS23003-2 | 2 | |
| G287 | Gage - GO .1245 - NO-GO .1315 | 2 | |
| G288 | Gage - GO .1755 - NO-GO .1805 | 2 | |
| G289 | Gage - GO .3815 - NO-GO .3865 | 2 | |
| G290 | Gage - GO .0975 - NO-GO .1025 | 2 | |
| G292 | Gage - GO .0665 - NO-GO .0715 | 2 | |
| G296 | Gage - GO .1080 - NO-GO .1180 | 2 | |
| G316 | Gage - GO .0180 - NO-GO .0220 | 2 | |
| G32004-5 | GAGE EQPT - TRUNNION & DRAG LINK FITTING INSTL, NLG SPL-6909, SPL-6910 | 6 | |
| G32005-8 | GAGE - FITTING, INBD TRUNNION VERTICAL SUPPORT SPL-5168 | 6 | |
| G325 | Gage - GO .2165 - NO-GO .2235 | 2 | |
| G326 | Gage - GO .1665 - NO-GO .1735 | 2 | |
| G327 | Gage - GO .0510 - NO-GO .0570 for AMP 46447 | 2 | |
| G330 | Gage - GO .0860 - NO-GO .1000 | 2 | |
| G331 | Gage - GO .1230 - NO-GO .1370 | 2 | |
| G332 | Gage - GO .1590 - NO-GO .1730 | 2 | |
| G333 | Gage - GO .1900 - NO-GO .2040 | 2 | |
| G334 | Gage - GO .1000 - NO-GO .1060 | 2 | |
| G335 | Gage - GO .1540 - NO-GO .1620 | 2 | |
| G336 | Gage - GO .1850 - NO-GO .1930 | 2 | |
| G346 | Gage - GO .1715 - NO-GO .1805 | 2 | |
| G347 | Gage - GO .1415 - NO-GO .1505 | 2 | |
| G348 | Gage - GO .1175 - NO-GO .1265 | 2 | |
| G351 | Gage - GO .0410 - NO-GO .0490 | 2 | |
| G353 | Gage - GO .1130 - NO-GO .1210 | 2 | |
| G354 | Gage - GO .1470 - NO-GO .1550 | 2 | |
| G359 | Gage - GO .1485 - NO-GO .1535 | 2 | |
| G390 | Gage - GO .1985 - NO-GO .2055 | 2 | |
| G395 | Gage - GO .0920 - NO-GO .1020 | 3 | |
| G396 | Gage - GO .0990 - NO-GO .1090 | 2 | |
| G397 | Gage - GO .1180 - NO-GO .1280 | 2 | |
| G40 | Gage - GO .0440 - NO-GO .0510 | 2 | |
| G403 | Gage - GO .0330 - NO-GO .0410 | 2 | |
| G408 | Gage - GO .1170 - NO-GO .1229 | 2 | |
| G40D-06-P10 | GAGE (DIAMETER IS 40MM 0-150 PSI 0 -1 MPA CONNECTOR G1/8) | 1 | |
| G410 | Gage - GO .4090 - NO-GO .4170 | 3 | |
| G411 | Gage - 3 Step - M22520/39-01 | 6 | |
| G416 | Gage - GO .1010 - NO-GO .1090 | 2 | |
| G419 | Gage - GO .1250 - NO-GO .1290 | 2 | |
| G424 | Gage - GO .0760 - NO-GO .0810 | 2 | |
| G430 | Gage - GO .1040 - NO-GO .1080 | 2 | |
| G436 | Gage - GO .0610 - NO-GO .0660 | 2 | |
| G443 | Gage - GO .1420 - NO-GO .1460 - M22520/3-15 | 2 | |
| G445 | Gage - GO .1560 - NO-GO .1600 | 2 | |
| G446 | Gage - GO .1540 - NO-GO .1580 | 2 | |
| G465 | Gage - GO .2160 - NO-GO .2200 | 2 | |
| G468 | Gage - GO .2045 - NO-GO .2115 | 2 | |
| G475 | Gage - GO .3315 - NO-GO .3375 | 2 | |
| G486 | Gage - GO .4125 - NO-GO .4175 | 2 | |
| G488 | Gage - GO .1315 - NO-GO .1385 | 2 | |
| G493 | Gage - GO .1445 - NO-GO .1495 | 2 | |
| G506 | Gage - GO .0360 - NO-GO .0410 | 2 | |
| G513 | Gage - GO .0190 - NO-GO .0240 | 2 | |
| G519 | Gage - GO .1055 - NO-GO .1105 | 2 | |
| G524 | Gage - GO .1930 - NO-GO .1950 | 2 | |
| G533 | Gage - GO .1970 - NO-GO .2010 | 2 | |
| G537 | Gage - GO .2095 - NO-GO .2135 with Flats | 2 | |
| G594 | Gage - GO .1181 - NO-GO .1200 | 2 | |
| G615 | Gage - GO .0845 - NO-GO .0915 | 2 | |
| G616 | Gage - GO .1375 - NO-GO .1425 | 2 | |
| G624 | Gage - GO .1910 - NO-GO .2010 | 3 | |
| G625 | Gage - GO .2160 - NO-GO .2220 | 2 | |
| G628 | Gage - GO .0105 - NO-GO .0145 | 2 | |
| G630 | Gage - GO .1030 - NO-GO .1090 | 2 | |
| G635 | Gage - GO .3415 - NO-GO .3465 | 2 | |
| G649 | Gage - GO .4125 - NO-GO .4175 | 2 | |
| G654 | Gage - GO .1690 - NO-GO .1750 | 2 | |
| G664 | Gage - GO .1470 - NO-GO .1550 | 2 | |
| G668 | Gage - GO .1680 - NO-GO .1740 | 2 | |
| G678 | Gage - GO .1080 - NO-GO .1170 | 2 | |
| G682 | Gage - GO .1660 - NO-GO .1740 | 2 | |
| G683 | Gage - GO .1980 - NO-GO .2060 | 2 | |
| G686 | Gage - GO .1450 - NO-GO .1490 | 2 | |
| G691 | Gage - GO .1230 - NO-GO .1270 | 2 | |
| G693 | Gage - GO .1300 - NO-GO .1360 | 2 | |
| G694 | Gage - GO .1710 - NO-GO .1780 | 2 | |
| G695 | Gage - GO .1950 - NO-GO .2020 | 2 | |
| G697 | Gage - GO .3510 - NO-GO .3580 | 2 | |
| G700 | Gage - GO .1645 - NO-GO .1715 | 2 | |
| G700-523103-1 | Internal Baggage Door Lock (Pre Sb700-52-034/Sb700-1A11-52-011) | 2 | |
| G700-523103-15 | Internal Baggage Door Lock (Post Sb700-52-034/Sb700-1A11-52-011) | 2 | |
| G701 | Gage - GO .0440 - NO-GO .0510 - MS3196-20 | 2 | |
| G703 | Gage - GO .1530 - NO-GO .1560 | 2 | |
| G704 | Gage - GO .2150 - NO-GO .2190 with Flats | 2 | |
| G719 | Gage - GO .1230 - NO-GO .1290 | 2 | |
| G720 | Gage - GO .2078 - NO-GO .2120 -MS90486-8 | 2 | |
| G722 | Gage - GO .2968 - NO-GO .3010 - MS90486-4 | 2 | |
| G723 | Gage - GO .1678 - NO-GO .1720 - MS23003-8 | 2 | |
| G724 | Gage - GO .1998 - NO-GO .2040 -MS23003-6 | 2 | |
| G725 | Gage - GO .2518 - NO-GO .2560 - MS23003-4 | 2 | |
| G726 | Gage - GO .3368 - NO-GO .3410 - MS23003-1 | 2 | |
| G727 | Gage - GO .3678 - NO-GO .3720 -MS23003-01 | 2 | |
| G728 | Gage - GO .4018 - NO-GO .4060 - MS23003-02 | 2 | |
| G743 | Gage - GO .0990 - NO-GO.1120 | 3 | |
| G744 | Gage - GO .1310 - NO-GO .1390 | 5 | |
| G745 | Gage - GO .1720 - NO-GO .1800 | 2 | |
| G746 | Gage - GO .2020 - NO-GO .2100 | 2 | |
| G747 | Gage - GO .2610 - NO-GO .2690 | 9 | |
| G749 | Gage - GO .2710 - NO-GO .2790 | 2 | |
| G752 | Gage - GO .1110 - NO-GO .1270 - M81306/2-02F | 2 | |
| G755 | Gage - GO .1510 - NO-GO .1590 | 2 | |
| G767 | Gage - GO .1090 - NO-GO .1150 | 2 | |
| G768 | Gage - GO .1190 - NO-GO .1250 | 2 | |
| G771 | Gage - GO .1180 - NO-GO .1240 | 2 | |
| G772 | Gage - GO .1600 - NO-GO .1680 | 2 | |
| G786 | Gage - GO .1960 - NO-GO .2020 | 2 | |
| G788 | Gage - GO .2150 - NO-GO .2210 | 2 | |
| G789 | Gage - GO .1415 - NO-GO .1465 | 2 | |
| G792 | Gage - GO .1920 - NO-GO .1940 | 2 | |
| G795 | Gage - GO .1080 - NO-GO .1130 | 2 | |
| G80 | Gage - GO .0410 - NO-GO .0445 | 2 | |
| G801 | Gage - GO .3080 - NO-GO .3160 | 3 | |
| G806 | Gage - GO .1270 - NO-GO .1370 | 2 | |
| G808 | Gage - GO .1455 - NO-GO .1525 | 2 | |
| G811 | Gage - GO .0310 - NO-GO .0340 | 2 | |
| G812 | Gage - GO .3105 - NO-GO .3155 | 2 | |
| G813 | Gage - GO .1600 - NO-GO .1670 | 2 | |
| G820 | Gage - GO .1120 - NO-GO .1200 | 2 | |
| G821 | Gage - GO .1380 - NO-GO .1460 | 2 | |
| G827 | Gage - GO .1545 - NO-GO .1615 | 2 | |
| G834 | Gage - GO .4148 - NO-GO .4190 - MS90486-1 | 2 | |
| G835 | Gage - GO .4538 - NO-GO .4580 - MS90486-01 | 2 | |
| G838 | Gage - GO .6158 - NO-GO .6200 - MS90486-04 | 2 | |
| G842 | Gage - GO .1800 - NO-GO .1850 | 2 | |
| G864 | Gage - GO .0190 - NO-GO .0220 | 2 | |
| G872 | Gage - GO .2370 - NO-GO .2410 | 2 | |
| G873 | Gage - GO .1390 - NO-GO .1430 | 2 | |
| G876 | Gage - GO .1915 - NO-GO .1985 | 2 | |
| G884 | Gage - GO .1430 - NO-GO .1470 | 2 | |
| G885 | Gage - GO .1000 - NO-GO .1080 for DCT4-105 | 2 | |
| G886 | Gage - GO .0740 - NO-GO .0820 for DCT4-105 | 2 | |
| G887 | Gage - GO .0630 - NO-GO .0710 for DCT4-105 | 2 | |
| G917 | Gage - GO .1240 - NO-GO .1280 | 2 | |
| G928 | Gage - GO .1170 - NO-GO .1210 with Flats | 2 | |
| G931 | Gage GO 0.1260/0.0900/0.0760 - NO-GO 0.1380/0.1020/0.0880 | 2 | |
| G933 | Gage - GO .2065 - NO-GO .2135 | 2 | |
| G946 | Gage - GO .2085 - NO-GO .2155 | 2 | |
| G961 | Gage - GO .3210 - NO-GO .3290 | 2 | |
| G967 | Gage - GO .3100 - NO-GO.3200 | 2 | |
| G985 | Gage - GO .0920 - NO-GO .1120 | 2 | |
| G986 | Gage - GO .0910 - NO-GO .0970 | 2 | |
| G987 | Gage - GO .0120 - NO-GO .0140 | 2 | |
| G997 | Gage - GO .1525 - NO-GO .1595 | 2 | |
| GA47567-110-A | GAGE, PRESSURE, DIAL INDICATING NSN 6685-14-563-5048 | 1 | |
| GA75-241 | PRESSURE GAGE 0-60 PSIG (1) CL0.75 | 1 | |
| GAGE 0-160 PSI | PRESSURE GAGE 0-160 PSI | 1 | |
| GAGE PIN, 1/2 INCH DIAMETER | GAGE PIN, 1/2 INCH DIAMETER | 1 | |
| GB751204 | 751204, GAGE BILT TOOL PART, ADAPTER ASSEMBLY | 2 | |
| GB752 | Gage Bilt Blind Riveter (Installs CherryMAX up to 1/4" Diameter!) | 3 | |
| GD-1431 | Gage-1.D. contour | 1 | |
| GD-25 | GAGE - GRAM, 50-250 GRAM FORCE, /-0.1 ACCURACY | 13 | |
| GD-30 | GAGE - GRAM, 40-350 GRAM FORCE, /-0.1% ACCURACY | 2 | |
| GGG-G-17 | GAGE SET,TELESCOPIN NSN: 5210004739350 | 1 | |
| GLOB925297 | GAGE SET TELESCOPIC 5/16-6 | 1 | |
| GS-18019 | UNIVERSAL SURFACE GAGE. 18 LNCHES LONG. HARDENED STEEL BASE. WIDE RANGE, FINE ADJUSTMENT. WITH SCRIBER. | 1 | |
| GS10-752B-20 | GB713-NOSE ASSEMBLY ACCESSORIES (MFG : GAGEBILT DIA : 10/32 TYPE : STRAIGHT) | 1 | |
| GS13966-1 | GAGE,N1, SPLINE WEAR | 1 | |
| GS8-752C-20 | GB713-NOSE ASSEMBLY ACCESSORIES (MFG : GAGEBILT DIA : 8/32 TYPE : STRAIGHT ) | 1 | |
| GSB2000024 | FORCE GAGE (0 - 100 LB) | 1 | |
| GSB5231001 | TEST FIXTURE P/N: GSB5231001 TO BE USED IN TESTING JXH AFT BAGGAGE DOOR GAS SPRINGS INTEGRITY. | 1 | |
| GSE113-11 | GAGE PIN-1159GSE113-11 | 1 | |
| GSE5100758 | PUSH-PULL FORCE GAGE, (0 - 50 POUNDS)-GSE5100761 & GSE5100758 | 1 | |
| GSE5100761 | PUSH-PULL FORCE GAGE, (0 - 50 POUNDS)-GSE5100761 & GSE5100758 | 1 | |
| GSE5101092 | BALL GAGES-GSE5101092 | 1 | |
| GSE5120516 | PUSH-PULL GAGE 0-200 POUNDS-GSE5120516 | 1 | |
| H-2318 | GAGE, PRESSURE, 0-15 PSI (0-1.03 BAR) | 1 | |
| H2636 | GAGE - TIRE PRESSURE, 0-300 PSIG (0-2069 KPA), STD-1132 | 3 | |
| HC-2144 | GAGE,DIFFERENTIAL,DIAL INDICATING;|SYSTEM PRESSURE GAUGE;HYDRULIC POWER UNIT (MODEL 5241) FOR TESTING HELLI 429 | 5 | |
| HCS2027-01 | VACUUM GAGE 0-(-100) KPA | 3 | |
| HCS2027-03 | VACUUM GAGE 0-(-100) KPA | 1 | |
| HD120 | 12 Ton Large Gage Hydraulic Crimp Tool | 2 | |
| HF439 | GAGE ASSY AIR PRESSUR KMA 0-100PSI | 2 | |
| HG177-3 | PIN PROTUSION GAGE 3/16"DIA | 1 | |
| HG177-4 | PIN PROTUSION GAGE 1/4"DIA | 1 | |
| HG177-5 | PIN PROTUSION GAGE 1/4"DIA | 1 | |
| HG77-13A | PIN/COLLAR GAGE (FOR PINS 0.250 IN DIAMETER AND COLLARS, NAS1080C08) | 1 | |
| HG77-14A | PIN/COLLAR GAGE (FOR PINS 0.190 IN DIAMETER AND COLLARS, NAS1080C06) | 1 | |
| HSP1617 | GAGE #51 SPLINE NO GO | 1 | |
| HU20604 | GAGE, POSITION OF I.D.G. COOLER TO L.P. COMPRESSOR FAN CASE RB211 | 1 | |
| HU24461 | GAGE - THREAD (0.1900 IN - 32 THD/IN) | 3 | |
| HU24463 | GAGE - THREAD (0.3125 IN - 24 THD/IN) | 3 | |
| HU24467 | GAGE - THREAD (0.5625 IN - 18 THD/IN) | 3 | |
| HU24468 | GAGE - THREAD (0.6250 IN - 18 THD/IN) | 3 | |
| IAE 1P16092 | IAE 1P16092 IGNITER IMMERSION GAGE | 14 | |
| IAE 1P17515 | IAE 1P17515 GAGE | 1 | |
| IAE 2F10418 | IAE 2F10418 LENGTH GAGE | 1 | |
| IAE1J12356 | IAE 1J12356 SETTING GAGE | 1 | |
| IAE1M14114 | IAE 1M14114 SIZING GAGE | 1 | |
| IAE1P16186 | IAE 1P16186 GAGE BAR | 1 | |
| IAE1R18271 | IAE 1R18271 AIR PLUG GAGE | 1 | |
| IAE2P16207 | STAGES 1 & 2 HPT BLADE LENGTH OPTICAL GAGE | 1 | |
| IAE2P16371 | STAGES 1 HPT BLADE LENGTH GAGE | 1 | |
| J25001-8-CMF | 13 GAGE HRS ASTM A569 | 1 | |
| J27034-27 | .010 thickness gage | 1 | |
| J27081-1 | GAGE - GO/NO GO (J27081-6 ASSY INCLUDED IN J27081-1 RIGGING EQUIPMENT - OUTBOARD TRAILING EDGE FLAPS) USED ON 777-200LR, -300ER AND 777F AIRPLANES. | 7 | |
| J4M001 | 145 BAGGAGE BAY DOOR TENSION TOOL | 1 | |
| J52041-1 | GAGE - GO/NO-GO_[J52041-1] | 5 | |
| LBS586 | HEIGHT GAGE 0 - 14 | 1 | |
| LG-0505 | PUSH-PULL GAGE (50 LB.) LG-0505 COTS Q0091W ONLY | 1 | |
| LG-100 | GAGE - FORCE, DIGITAL (0 TO 100 LBS) | 10 | |
| LG-1KG | GAGE - FORCE, WITH RESOLUTION OF 0.15-LB OR BETTER | 2 | |
| LST12260 | ELECT DEPTH GAGE 3753A-12/300 | 1 | |
| LST12456 | DIAL BORE GAGE 0.7-1.5IN | 1 | |
| LST12457 | DIAL BORE GAGE 1.4-2.4IN | 1 | |
| LST24483-0 | BORE GAGE HEAD .160-.200 | 1 | |
| LST50677 | JOBBERS' DRILL GAGE 1/16-1/2" | 1 | |
| LST50678 | ENGLISHSTANDARDWIREGAGENOS1-36 | 1 | |
| LST51296 | RADIUS GAGE 1/32IN 17 64IN | 1 | |
| LST51318 | USSTANDARDGAGE#0-36(.3125-.007 | 1 | |
| LST52610 | GAGE TELESCOPING 5/16 - 1/2 | 1 | |
| LST52611 | GAGE, TELESCOPING 1/2 - 3/4 | 1 | |
| LST52612 | GAGE TELESCOPING 3/4-1 1/4 | 1 | |
| LST52613 | TELESCOPING GAGE 1-1/4-2-1/8" | 1 | |
| LST52614 | GAGE, TELESCOPING 2-1/8-3-1/2 | 1 | |
| LST52615 | GAGE TELESCOPING 3 1/2 - 6 | 1 | |
| LST53081 | HOLE GAGE 0.125IN-0.500IN 5PC | 1 | |
| LST55249 | WOOD CASE FOR 12" (300MM)GAGES | 1 | |
| LST66876 | RADIUS GAGE SET S167CHZ W/SLC | 1 | |
| LST67482 | PIN GAGE SET .061-.250 | 1 | |
| LST67484 | PIN GAGE SET .251-.500 | 1 | |
| LST67485 | GAGE PIN SET .251-.500 | 1 | |
| LST67677 | BORE GAGE 2 5/8 - 3 1/4 | 1 | |
| LST67678 | BORE GAGE 3 1/4 - 4 | 1 | |
| LST68132 | BORE GAGE 1/2 - 5/8 | 1 | |
| LST68134 | BORE GAGE 3/4 - 1 | 1 | |
| LSTRS100A1 | BLOCK GAGE-.100 SHORT | 1 | |
| LTCT9896 | 100. GAGE SPLIN WEAR | 1 | |
| M22520/3-1 | G125 INSPECTION GAGE | 10 | |
| M22520/3-10 | GAGE G262 FOR X511 | 1 | |
| M22520/3-3 | GAGE G145 FOR MH860 | 1 | |
| M22520/6-002 | GAGE G186 FOR Y193 | 1 | |
| M22520/6-003 | GAGE G155 FOR Y215 | 1 | |
| M22520/6-005 | GAGE G188 FOR Y189 | 1 | |
| M22520/6-006 | GAGE G185 FOR Y197 | 1 | |
| M22520/6-008 | GAGE G180 FOR Y197 Y205 Y680 | 1 | |
| M22520/6-009 | GAGE G190 FOR Y143 X155 | 1 | |
| M22520/6-010 | GAGE G191 FOR Y143/Y212 | 1 | |
| M22520/6-011 | GAGE G170 FOR Y195 | 1 | |
| M22520/6-014 | GAGE G194 FOR Y140 | 1 | |
| M22520/6-015 | GAGE G195 FOR Y139 | 1 | |
| M22520/6-020 | GAGE G199 FOR Y910 | 1 | |
| M22520/6-022 | GAGE G165 FOR Y630P | 1 | |
| M22520/6-029 | GAGE G160 FOR Y679 Y205 | 1 | |
| M3914597 | GAGE LENGTH BLADE HPC 13TH STAGE | 1 | |
| M7-200 | DIGITAL FORCE GAGE 1000 N; 0.5 N | 1 | |
| M7200 | DIGITAL FORCE GAGE 1000 N; 0.5 N | 1 | |
| MDL24 | BORE GAGE_I.D13/4~3.0"RANGE_[MDL24] | 1 | |
| MF-10 | DIAL PUSH-PULL GAGE_(0 ~ 10) LBF (1 DIV:0.05 LBF)_[MF-10] | 1 | |
| MI5513-16 | INSERTION TOOL 16 GAGE DEUTSCH CONNECTOR. | 1 | |
| MI5515-16 | REMOVAL TOOL 16 GAGE CONTACTS ON DEUTSCH CONNECTOR. | 1 | |
| MT0000243 | BORE GAGE 100-160/0.01MM 511-714 | 1 | |
| MT0000246 | BORE GAGE 160-250/0.001MM 511-725 | 1 | |
| MT352-1 | MAIN ROTOR BLADE TRIM TAB GAGE (INCLUDES MT200-1 DIAL INDICATOR) | 2 | |
| MTI516-126 | GAGE BLOCK_[MTI516-126] | 1 | |
| MTS-0170 | CYLINDER GAGE 1.4"-2.4" | 1 | |
| NB4504-D | GAGE - PRESSURE, TIRE 2 X INLINE ADAPTERS FOR SMALL 8V & LARGE 12V SIZE VALVES | 1 | |
| NRK-3AST | Gage Set NSN 5280-01-352-1336(KIT INCLUDES AL, ST, AND TI STDS) *DO NOT USE THIS PART NUMBER, OURS IS RSN-3AST | 1 | |
| P5 | P1 TAPE GAGE_90X90X25MM,0.5KG_[P5] | 3 | |
| PIN GAGE | .251-.500 PLUS PIN GAGE SET | 1 | |
| PIN GAGE .011-.060 | .011 TO. 060 50PCS SPI PIN GAGE SETS | 1 | |
| PIN GAGE 0.61-.250 | .061 TO .250 190PC SPI PIN GAGE SETS | 1 | |
| PT000821 | HPT VANE 2 DIMENSION B GAGE_[PT000821] | 1 | |
| PWA 102488 | STEP GAGE (TYPE 1 BLADE) | 1 | |
| PWA 102832 | GAGE, CROSS SHROUD/CROSS NOTCH (TYPE 1 BLADES) | 1 | |
| PWA 102903 | INDICATOR GAGE (REPLACES PWA 102844) | 1 | |
| PWA | INDICATOR GAGE (TYPE 1 BLADE) | 1 | |
| PWA 102903 | INDICATOR GAGE (TYPE 1 BLADE) | 1 | |
| PWA101022 | GAGE, GO-NO, GO_[PWA101022] | 1 | |
| PWA101023 | GAGE_[PWA101023] | 2 | |
| PWA101089 | GAGE, GO-NO, GO_[PWA101089] | 1 | |
| PWA101090 | GAGE_[PWA101090] | 2 | |
| PWA101763 | GAGE SET_[PWA101763] | 1 | |
| PWA102844 | GAGE, INDICATOR (REPLACED BY PWA 102903) | 1 | |
| PWA102903 | GAGE, INDICATOR (REPLACES PWA 102844) | 1 | |
| PWA11433 | GAGE - NO.1 BRG CONTACT ANGLE INSP_[PWA11433] | 1 | |
| PWA25096 | 12 STG CHORD GAGE | 2 | |
| PWA25915 | GAGE, CLASSIFICATION - LPT 5TH STG VANE_[PWA25915] | 2 | |
| PWA25917 | GAGE,CLASSIFICATION - LPT 6TH VANE_[PWA25917] | 1 | |
| PWA25941 | GAGE - STATOR HPC 11TH VANE ANGLE CHK_[PWA25941] | 1 | |
| PWA25942 | GAGE - COMP STATOR 11TH STG VANE L/E_[PWA25942] | 1 | |
| PWA25943 | GAGE - STATOR, HPC 12,13 &14TH VANE ANGL_[PWA25943] | 1 | |
| PWA25944 | GAGE, STATOR - HPC 12,13 & 14TH VANE ANG_[PWA25944] | 1 | |
| PWA26649 | GAGE, BLADE WEAR - HPC 10TH STG BLADE_[PWA26649] | 2 | |
| PWA26650 | GAGE - BLADE, HPC 11TH STAGE_[PWA26650] | 2 | |
| PWA26651H | GAGE, BLADE WEAR - HPC 12TH STAGE_[PWA26651H] | 1 | |
| PWA26652 | GAGE, BLADE WEAR - HPC 13TH STAGE_[PWA26652] | 2 | |
| PWA26683 | GAGE, BLADE WEAR - HPC 14TH STAGE_[PWA26683] | 2 | |
| PWA26684 | GAGE - BLADE WEAR, HPC 15TH STAGE_[PWA26684] | 2 | |
| PWA27021 | GAGE, CALIPER - TURB C/A/NOZZ W/THK_[PWA27021] | 1 | |
| PWA27133 | GAGE - SUPPORT ASSY OVERALL DIM CHK_[PWA27133] | 1 | |
| PWA27287 | GAGE - HPT 1ST BLADE L/E EROSION_[PWA27287] | 1 | |
| PWA27720 | GAGE, CLASSIFICATION - 1ST TURB VANE_[PWA27720] | 2 | |
| PWA27724 | GAGE SET, AIRFOIL CONTOUR - 1ST TURB VN_[PWA27724] | 1 | |
| PWA28008 | GAGE, NO GO - WEAR, 1ST FAN BLD H/FACE_[PWA28008] | 1 | |
| PWA28120 | GAGE, STRETCH - LPT SOLID TIEROD_[PWA28120] | 1 | |
| PWA28199 | GAGE - VANE ARM ANGLE CHECKING_[PWA28199] | 2 | |
| PWA28227 | GAGE, NO GO - HPC 10TH STAGE CHORD WIDTH_[PWA28227] | 1 | |
| PWA28228 | GAGE, NO GO - HPC 11TH STG CHORD WIDTH_[PWA28228] | 1 | |
| PWA28229 | GAGE, NO GO - HPC 12TH STAGE CHORD WIDTH_[PWA28229] | 1 | |
| PWA28230 | GAGE,NO GO - HPC 13TH STG CHORD WIDTH_[PWA28230] | 1 | |
| PWA28231 | GAGE, NO GO - HPC 14TH STAGE CHORD WIDTH_[PWA28231] | 1 | |
| PWA28232 | GAGE, NO GO - HPC 15TH STAGE CHORD WIDTH_[PWA28232] | 1 | |
| PWA28241 | GAGES - Z.PLANE DIA 5TH STG COMPR DISK_[PWA28241] | 1 | |
| PWA28243 | GAGE - DISKS,HPC 7TH~15TH STG Z-PL DIA._[PWA28243] | 1 | |
| PWA28251 | GAGE_[PWA28251] | 1 | |
| PWA28818 | GAGE - FAN BLADE L/E & T/E THICKNESS_[PWA28818] | 2 | |
| PWA28939 | GAGE, POSITIONING - 3.0 BLEED CONTROL_DIA.12.7X261.6MM/0.225KG_[PWA28939] | 2 | |
| PWA29156 | GAGE - FAN CASE RUB STRIP_127X102X102MM/0.45KG_[PWA29156] | 7 | |
| PWA29156-1 | GAGE - FAN CASE RUB STRIP_127X102X102MM/0.45KG_[PWA29156] | 1 | |
| PWA29681 | GAGE SET, AIRFOIL_[PWA29681] | 1 | |
| PWA29780 | GAGE - 3.0 BLEED FEEDBACK CABLE_27X25.4X12.7MM/0.225KG_[PWA29780] | 1 | |
| PWA35050 | TF33/JT3 TURBINE VANES STG 1 - CLASSIFICATION GAGE | 1 | |
| PWA35051 | TF33/JT3 TURBINE VANES STG 1- CLASSIFICATION GAGE MASTER | 1 | |
| PWA46008 | GAGE (REPLACED BY PWA 101193) | 1 | |
| PWA46009 | GAGE (REPLACED BY PWA 101193) | 1 | |
| PWA47926 | GAGE (REPLACED BY PWA 102391) | 1 | |
| PWA75152 | GAGE_[PWA75152] | 2 | |
| PWA75221 | STRETCH GAGE (MASTER)_[PWA75221] | 2 | |
| PWA75961 | GAGE-MID SPAN_[PWA75961] | 1 | |
| PWA76011 | WEAR GAGE_[PWA76011] | 2 | |
| PWA76012 | GAGE WEAR_[PWA76012] | 2 | |
| PWA76013 | WEAR GAGE_[PWA76013] | 2 | |
| PWA86141 | GAGE ( SB PW4ENG 72-227 REV1 )_203X76X25MM/0.5KG_[PWA86141] | 1 | |
| PWA86224 | GAGE ID HPC 10TH STAGE RUBSTRIP | 1 | |
| PWA86227 | GAGE ID HPC 11TH STAGE RUBSTRIP | 1 | |
| PWA86278 | GAGE ID HPC 12TH STAGE RUBSTRIP | 1 | |
| PWA86279 | GAGE ID HPC 13TH STAGE RUBSTRIP | 1 | |
| PWA86282 | GAGE ID HPC 14TH STAGE RUBSTRIP | 1 | |
| PWA86284 | GAGE ID HPC 15TH STAGE RUBSTRIP | 1 | |
| PWC34061 | GAGE, AXIAL POSITION CHECK PWC34061 | 6 | |
| PWC34161 | GAGE,AXIAL POSITION CHECK PWC34161 | 4 | |
| PWC71903 | GROWTH GAGE - *P/N:3079351-01 - Blade Turbine requires qty 4 | 4 | |
| PWC72341 | GAGE CT BLADE GROWTH PT6A-140 | 1 | |
| RGS-300 | RADIUS GAGE SET 25 PIECES 1/64 TO 17/64'' | 1 | |
| RIT-12A | POWER TERMINAL WIRE INSERTION TOOL (12 GAGE) | 1 | |
| RIT-12RA | POWER TERMINAL WIRE INSERTION TOOL (12 GAGE) | 1 | |
| RSN-3AST | Gage Set NSN 5280-01-352-1336, Consist of 7075T6, 4340 & 6AL4V Standards | 1 | |
| RTSG0-01-04 | MARKING GAGE 1/4 | 3 | |
| RTSG0-51-04 | INSPECTION GAGE 1/4 | 1 | |
| S-4000-060 | PIN GAGE SET_(0.011 ~ 0.060) INCH_[S-4000-060] | 2 | |
| S108-012 | CANOPY COVER, 108-3 models, over the top style, extends to cover baggage door | 1 | |
| S108-013 | CANOPY COVER, over top type, 108-3 models, extends to cover baggage door, extended to overlap with shortened Empennage Cover | 1 | |
| S108-014 | EXTENDED CANOPY COVER, 108-3 models, over-top type, extends to cover baggage door, extended to overlap with shortened Empennage Cover | 1 | |
| S108-825 | TRAVEL COVER, Light Weight Canopy Cover, 108-3 models, over the top style, extends to cover baggage door | 1 | |
| S167AHZ | STARRETT® 17 Piece Radius Gage Set - USA MADE! | 1 | |
| S167AZ | STARRETT® 16 Piece Radius Gage Set - USA MADE! | 1 | |
| S167CHZ | RADIUS GAGES 1 | 1 | |
| S1812000715 | SENSOR YOKE W/STRAIN GAGE 125 | 1 | |
| S343-20-11 | GAGE AND DRIVE ASSY 100IN OZ | 1 | |
| S4003-250 | PIN GAGE SET 0.061 - 0.250 IN | 3 | |
| S829EZ | BALL GAGE (GSE5101092) | 2 | |
| SA30056 | BEARING ALIGNMENT MANDREL AND GAP GAGE 32-42-91 | 2 | |
| SAO10229 | OXIDATION GAGE-SAO10229 | 7 | |
| SB06-204D-27OS | GAGE BILT NOSE ASSY HUCK GUN OFFSET 3/16" | 2 | |
| SB06-751B-54RA | GAGE BILT NOSE ASSY HUCK GUN RIGHT ANGLE 3/16 | 2 | |
| SB08-204D-27OS | GAGE BILT NOSE ASSY HUCK GUN OFFSET 1/46" | 1 | |
| SB08-713A-58RA | GAGE BILT NOSE ASSY HUCK GUN RIGHT ANGLE 1/4" | 1 | |
| SITRANS P | DIFFERENTIAL PRESSURE GAGE (2.4 TO 240 INH2O (0.0867 TO 8.67 PSIG (0.597 TO 59.78 KPA)), ACCURACY: ±1% OF FULL SCALE) SIEMENS, SITRANS P, SERIES DSIII, TRANSMITTER MODEL 7MF4432-1EA22-1AC7-7 | 1 | |
| SPD21004 | 2 1/4"100PSIGAGE/CLT2 W/O41910 | 1 | |
| SR16GSDA | SR16GSDA SWAGE GAGE | 3 | |
| SRQ19GSDA | SRQ19GSDA AFTER SWAGE GAGE | 1 | |
| ST-310 | LYCOMING™ ST-310 GAGE, FOR IO-360-N1A ENGINES | 3 | |
| ST1396J-H-6 | HAND GUN-DRIVEN GAGE 3/16" | 1 | |
| ST1396J-H-8 | HAND GUN-DRIVEN GAGE 1/4" | 1 | |
| ST2220-2-4 | INSERTER - WIRE / CONTACTS (16 GAGE) (ASTRO TOOL CORPORATION) | 1 | |
| ST2220-3-14 | Removal - Wire / Contacts (16 Gage) | 1 | |
| ST8709H-X | Gage - Go/No-Go, Fuel Wiggins Coupling (BACC42R); X indicates gage number -1 to -7 | 2 | |
| ST8711J-6 | Standard Tool, Gage Protrusion (AA PO# HM51839001) | 1 | |
| ST8712PC-8 | PROTRUSION GAGE, .500, SP1 AND SP2 | 1 | |
| ST8712PC-9 | PROTRUSION GAGE, .562 SP1 AND SP2 | 1 | |
| STARRETT 269B | STARRETT 269B TAPER GAGE ( 0.5” - 1 “ ) | 1 | |
| STD-11739 | GAGE - PRESSURE - 0-50 PSIG +/- 1 ACCURACY WITH HOSE AND FITTINGS | 1 | |
| STD2 | FEELER GAGE, 0.001 IN. (0,02 MM) | 1 | |
| STDN 14-0-N | MANDRELS GAGE (KIT STDN 14-0-N) | 1 | |
| Sturdy box or platform | approximately 15 inches high with suitable mounting for dial indicator gage | 1 | |
| T-12520690 | PULLOVER GAGE W CONT 81MM | 1 | |
| T-12520694 | PULLOVER GAGE 81MM | 1 | |
| T-7243022 | PULLOVER GAGE W CONT 105MM | 1 | |
| T-7243023 | PULLOVER GAGE W CONT 120MM | 1 | |
| T-7243024 | PULLOVER GAGE W CONT 155MM | 1 | |
| T-7247996 | PULLOVER GAGE 105MM | 1 | |
| T-7247997 | PULLOVER GAGE 120MM | 1 | |
| T-7247998 | PULLOVER GAGE 155MM | 1 | |
| T01001418 | MD11 FWD CGO DOOR GO/NO GO GAGE | 1 | |
| T172-500 | T172-500 CHERRY AEROSPACE GO/NO-GO GAGE | 1 | |
| T2PP | PLUG, PIPE THREAD GAGEPORT(D18302 VALVE/REGULATORS) | 1 | |
| TB3104G001 | L.E. T1 CHECKING GAGE | 1 | |
| TB3501G001 | DIAMETER T1 CHECKING GAGE | 1 | |
| TH1A | TOOL - CRIMPING (16 GAGE CONTACT) | 13 | |
| TK 1738-6 | 02 SYSTEM TEST EQUIPMENT PRESSURE GAGE (0 TO 100 PSI) (MM 35-00-00 / 20-52-00) | 1 | |
| TK1738-6 | PRESSURE GAGE (0 TO 100PSI) (BEECHCRAFT CORP) | 1 | |
| TUBE1"3/4ODX11GAGEX12"-SS304 | TUBE 1"3/4OD X 11GAGE (0.120) X 12" SS304 | 1 | |
| V/1945-02-05 | AIR PRESSURE GAGE_(0 ~ 30) IN.HG (0.1) ±0.5 %_[V/1945-02-05] | 1 | |
| VDS-6DC | DIGITAL DEPTH GAGE (GSE316) | 1 | |
| WA23-113L | GAGE 1/0 | 3 | |
| WA23-13 | GAGE 1/0 | 4 | |
| WAVEBRT100-6 | PADDLE GAGE BUT REMOVAL 3/16 | 1 | |
| WAVEBRT100-8 | PADDLE GAGE BUT REMOVAL 1/4 | 1 | |
| WAVRTO100-10 | 10IN DIA WRENCH PADDLE GAGE | 1 | |
| WC-FR-14-0-N-4340 | GAGE FINISH REAMER (KIT STDN 14-0-N) | 1 | |
| WCI-CBG-06-3-N | COMBINATION GAGE, 1/4" 1ST OVERSIZE Ø.2350-.2380 , Ø.2390 | 2 | |
| WCI-CBG-08-1-N | COMBINATION GAGE, 1/4" 1ST OVERSIZE Ø.2350-.2380 , Ø.2390 | 2 | |
| WCI-CBG-08-3-N | COMBINATION GAGE, 5/16" NOMINAL Ø.2830-.2860 , Ø.2870 | 2 | |
| WCI-CBG-14-0-N | COMBINATION GAGES (KIT STDN 14-0-N) | 2 | |
| WCI-CBG-A61 | 1ST O.S. COMB GAGE | 1 | |
| WCI-FHG-****-XXXX | GAGE FINISH REAMER (KIT STDN 14-0-N) | 1 | |
| WCI-FHG-4340-4350 | GAGE FINISH REAMER (KIT STDN 14-0-N) | 1 | |
| WCI-FHG-A61-.3895 | 1ST GO/NOGO GAGE | 1 | |
| WCI-FHG-A61-.3920 | 1ST GO/NOGO GAGE | 1 | |
| WCI-FR-04-2-N-1590 | GAGE REAMER .1610/.1590 | 2 | |
| WCI-FR-04-2-N-1590-RA | RIGHT ANGLE GAGE FINISH REAMER (0.1580" - 0.1600") | 1 | |
| WCI-FR-04-4-N-1770-RA | RIGHT ANGLE GAGE FINISH REAMER (0.1760" - 0.1780") | 1 | |
| WCI-FR-04-4-N-1845 | GAGE REAMER .1870/.1850 | 1 | |
| WCI-FR-04-4-N-1856 | GAGE REAMER .1870/.1850 | 1 | |
| WCI-FR-04-4-N-1870 | GAGE REAMER .1870/.1850 | 1 | |
| WCI-FR-06-0-N-1850 | GAGE REAMER .1870/.1850 | 2 | |
| WCI-FR-06-0-N-1850-RA | RIGHT ANGLE GAGE FINISH REAMER (0.184" - 0.186") | 2 | |
| WCI-FR-06-1-N-1995-RA | RIGHT ANGLE GAGE FINISH REAMER (0.199" - 0.201") | 2 | |
| WCI-FR-06-2-N-2150-RA | RIGHT ANGLE GAGE FINISH REAMER (0.215" - 0.216") | 2 | |
| WCI-FR-06-2-N-2294 | GAGE REAMER .2319/.2294 | 1 | |
| WCI-FR-06-3-N-2290 | GAGE REAMER .2319/.2294 | 1 | |
| WCI-FR-08-1-N-2620-RA | RIGHT ANGLE GAGE FINISH REAMER (0.261" - 0.263") | 2 | |
| WCI-FR-10-0-N-xxxx | GAGE REAMER .3100/.3070 | 1 | |
| WCI-FR-10-3-N-3745 | GAGE FINISH REAMER (9.512 MM) | 1 | |
| WCI-FR-A40-2495 | GAGE FINISH REAMERS, REF: FTI, P/N: CAR-40-1-.2495 | 1 | |
| WCI-FR-A40-2495-CBD | GAGE FINISH REAMERS, REF: FTI, P/N: CAR-40-1-.2495 | 1 | |
| WCI-WG-A61 | 1ST O.S. MANDREL GAGE | 1 | |
| WCI-WGX-08-0 | MANDREL WEAR GAGE,FOR 1/4" NOMINAL HOLE SIZE | 1 | |
| WCI-WGX-08-1 | MANDREL WEAR GAGE,FOR 17/64" NOMINAL HOLE SIZE | 1 | |
| WCI-WGX-10-1 | MANDREL WEAR GAGE,FOR 21/64" NOMINAL FASTENER SI | 1 | |
| WCIS-WG-14-0-N | MANDRELS GAGE (KIT STDN 14-0-N) | 2 | |
| WCIS-WG-16-2-N | MANDREL GAGE PER COLD WORKING DIAM 17/32" CLASSE I | 2 | |
| X-250C | FORCE GAGE(COMPRESSION)_(0 ~ 250) LBF (1 DIV:2.5 LBF)_[X-250C] | 1 | |
| X-50C | FORCE GAGE(COMPRESSION)_(0 ~ 50) LBF (1 DIV:0.5 LBF)_[X-50C] | 1 | |
| Y631 | Die Set - M22520/5-105 - Use G668 & G190 Gage | 5 | |
| ZT345 | MICRO STOP GAGE 1/16D | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
