| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| PWC56341 | GAGE, | 2 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 856A1068G02 | GAGE,LOCKING LUG | 1 | |
| (CALIB) 97A27003000000 | GAGE GAGE,ASSY-PUSH-PULL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 97A27003000004 | GAGE GAGE,ASSY-PUSH-PULL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 97A27003000005 | GAGE GAGE,ASSY-PUSH-PULL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 97A27003000006 | GAGE GAGE,ASSY-PUSH-PULL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 97A27003000007 | GAGE GAGE,ASSY-PUSH-PULL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 9C1341P01 | GAGE, TAPER-FAN BLADE/CASE (CALIBRATION) | 1 | |
| (CALIB) IAE1P16092 | GAGE,IGNITER (CALIBRATION) | 1 | |
| (CALIB) IAEIP16092 | GAGE, IGNITER (CALIBRATION) | 1 | |
| (CALIB) PWA104199 | Gage, Immersion (CALIBRATION) (CALIBRATION) | 1 | |
| 106 | GAGE,DEPTH,MICROMETER;2.500";PROVIDED;0.0010";MULTIPLE ROD; 0.000 TO 6.000";NOT INCLUDED;6;1/8 IN. DIA;| | 1 | |
| 1064 | GAGE,PRESSURE,DIAL | 1 | |
| 1075 | INFLATOR-GAGE, PNEUMATIC TIRE | 2 | |
| 1076 | GAGE,PRESSURE,DIAL INDICATING | 1 | |
| 100547 | GAGE, PRESSURE, PANEL MOUNT,200PSI | 1 | |
| 10163777 | GAGE,PROFILE | 1 | |
| 1082-00-20 | GAGE, HYDRAULIC PRESSURE: 0 TO 20 PSIG (138 KPAG) ,0 TO 100 PSIG (690 KPAG),0 TO 250 PSIG (1724 KPAG),0 TO 300 PSIG (2069 KPAG),0 TO 600 PSIG (4137 KPAG) AND 0 TO 5000 PSIG (34475 KPAG) | 1 | |
| 10C1141G01 | Gage,locking lug-compressor rotor assembly | 1 | |
| 10C1147G01 | Gage, Length-Core Engine Module | 1 | |
| 10C1400P01 | GAGE, NO. 4 BEARING TO FORWARD, ROTATING OIL SEAL, | 1 | |
| 11C23-10524 | TOOL, GAGE, GO/NO GO GROUND PWR | 1 | |
| 11C28-10036-1 | STRUT INFL GAGE, ALL A/C, | 1 | |
| 11C3340G01 | GAGE, DIGITAL IMMERSION DEPTH – HOOK TYPE (FOR IGNITER PLUG) | 1 | |
| 11C3403P02 | GAGE, TAPER - FAN BLADE/CASE | 1 | |
| 11C3403P03 | GAGE, TAPER - FAN BLADE/CASE | 1 | |
| 11C3403P04 | GAGE, TAPER - FAN BLADE/CASE | 1 | |
| 11C3403P05 | GAGE, TAPER - FAN BLADE/CASE | 1 | |
| 11C3403P06 | GAGE, TAPER - FAN BLADE/CASE | 1 | |
| 11C3584G01 | Gage,paralle bar-lpt rotor/stator build up | 1 | |
| 11C3584P02 | Gage,paralle bar-lpt rotor/stator build up | 1 | |
| 120-1D90-H7-01 | GAGE,PRESSURE,DIAL INDICATION;A4991-120-1D90-H7-01(NMCRL) | 1 | |
| 132D1282 | GAGE,PROFILE | 1 | |
| 14-6805-6010 | GAGE,TIRE PRESSURE, | 20 | |
| 14-6806-6011 | GAGE,TIRE PRESSURE, | 23 | |
| 14-6830-6012 | PRESSURE GAGE, TIRE | 11 | |
| 14145 | SWITCHGAGE, FUEL (MURPHY) 24V | 2 | |
| 1527T-305332 | GAGE,PLUG,THREAD,GO-NOGO,1"-12UNF,DOUBLE-END,TRU | 1 | |
| 1527T-315333 | GAGE,PLUG,THREAD,GO-NOGO,1"-12UNF,DOUBLE-END,TRU | 1 | |
| 17A1572G01 | GAGE, OVERSIZED SETSCREW STG 8-14 | 1 | |
| 17A1573G01 | GAGE, OVERSIZED SETSCREW STG 3-4 | 1 | |
| 17G130483-1 | GAGE,PRESSURE,DIAL INDICATING | 1 | |
| 18C1181 | GAGE,LOCKNG LUG-CPRT ASSY | 1 | |
| 18C1414G01 | Gage, Parallel Bar-Lpt Shaft/Coupling Nut | 1 | |
| 190432 | GAGE, SUPPORT | 1 | |
| 190G92000-G01 | JOINT GAGE, FLAP, SET | 2 | |
| 190T05730-401 | JOINT GAGE, FLAP, SET | 4 | |
| 19BCXXX0200E1BXAXX05 | GAGE, DIFFERENCIAL PRESSURE | 1 | |
| 1AE1M14122 | GAGE,LPT ACC PIPING | 1 | |
| 1C5759 | GAGE, CONCENTRICITY-VARIABLE STATOR INTERSTAGE SEA | 1 | |
| 1C5759 REV F | GAGE, CONCENTRICITY-VARIABLE STATOR INTERSTAGE SEAL. FM | 1 | |
| 1C5759G01 | GAGE, CONCENTRICITY, VARIABLE STATOR INTERSTAGE SEAL..TF39 ENGINE AGE | 1 | |
| 1C5937 | GAGE, CONCENTR #NAME? 5 BEARING INNER RING VERTICAL | 1 | |
| 1C5937 REV F | GAGE, CONCENTRICITY-NO.5 BEARING INNER RING VERTICAL | 1 | |
| 1C5937G01 | GAGE, VERTICAL CONCENTRICITY - BEARING 5 INNER RING | 1 | |
| 1C6096 | GAGE, IMMERSION DEPTH-IGNITER PLUG | 1 | |
| 1C6096 REV D | GAGE, IMMERSION DEPTH-IGNITER PLUG | 1 | |
| 1C6096G01 | Gage, Depth, Vernier | 1 | |
| 1C6096G01 | GAGE,IMMERSION DEPTH-IGNITETER | 1 | |
| 1C6299 | GAGE, INSPECT - STATIONARY AIR | 1 | |
| 1C6299G01 | GAGE, INSPECT - STATIONARY AIR | 1 | |
| 1C6345 | GAGE, CLEARANCE- OVERSPEED TRANSDUCER | 1 | |
| 1C6345 REV G | GAGE, CLEARANCE- OVERSPEED TRANSDUCER | 1 | |
| 1C6345G01 | GAGE, CLEARANCE OVERSPEED TRANSDUCER | 2 | |
| 1C6838 | GAGE, CONCENTRICITY TRF | 1 | |
| 1C6838 REV D | GAGE, CONCENTRICITY TRF | 1 | |
| 1C6958 | GAGE, CONCENCTRICITY - TURB. MID FRAME | 1 | |
| 1C6958 REV B | GAGE, CONCENCTRICITY - TURB. MID FRAME | 1 | |
| 1C8021 | GAGE, RUNOUT COMPR. REAR SHAFT | 1 | |
| 1C8021 REVA | GAGE, RUNOUT COMPR. REAR SHAFT | 1 | |
| 1C8021G01 | GAGE,CONCENTRICITY/RUNOUT,COMP | 1 | |
| 1C9620G01 | Gage，inspection-fan shaft to hpt stator case | 1 | |
| 1J12356 | Gage, setting | 1 | |
| 1M14114 | Gage, Sizing, LPT Seal ring | 1 | |
| 1M14115 | GAGE, CHECKING GO | 1 | |
| 1R18274 | Gage, Checking | 1 | |
| 1R18639 | Gage, Setting | 1 | |
| 20-1000-01B160 | GAGE,PRESSURE,DIAL 0-160PSI | 1 | |
| 2141-202 | GAGE,DEPTH,DIGITAL DISPLAY;|DIGITAL D GAUGE;FOR TOOL STORE FOR SERVICE HELI BELL 206 / 429;WWW.INSIZE.COM; | 1 | |
| 21C11432P01 | GAGE,FANDRIVESSHAFTFWDO.D. | 1 | |
| 21C11432P01 | GAGE, FAN DRIVES SHAFT FWD O.D. | 1 | |
| 21C2637G001 | GAGE,PROFILE | 1 | |
| 21C3110G002 | GAGE, PROFILE | 1 | |
| 21C565G002 | GAGE, INDICATING, TURBINE SEALS RUNOUT | 1 | |
| 21C6142G01 | GAGE,PROFILE | 1 | |
| 21C6198P01 | GAGE, THICKNESS, DIAL | 1 | |
| 21C7326G01 | CONTOUR GAGE, IMPELLER SHROUD | 1 | |
| 21C7326G01 | GAGE,CONTOUR,IMPELLER SHR | 1 | |
| 493 | GAGE,THICKNESS:STRAIGHT,3.312" BLADE LG | 1 | |
| 644 | DIAL DEPTH GAGE, 0-3" RANGE, 0-100 DIAL, .001" GRADUATIONS | 1 | |
| 3856 | GAGE, TURBINE ROTOR TO VANE AXIAL CLEARANCE (ALLISON) | 3 | |
| 64530 | GAGE, CONNECTING ROD PARALLELISM AND SQUARENESS | 1 | |
| 64537 | GAGE, FLAT PLUG - CONNECTING ROD BUSHING REJECTION ADQUIRIR | 1 | |
| 291455 | Gage, Shim Checking | 1 | |
| 294145 | GAGE, COUPLING ALIGNMENT | 1 | |
| 660047 | GAGE, STEPPED | 1 | |
| 660071 | GAGE, MM | 1 | |
| 660072 | GAGE, MM | 1 | |
| 660073 | GAGE, MM | 1 | |
| 660074 | GAGE, MM | 1 | |
| 660075 | GAGE, MM | 1 | |
| 660076 | GAGE, MM | 1 | |
| 2013508 | GAGE,TIRE PRESSURE,SELFC 2013508 LEONARD | 1 | |
| 2550693 | Plug Gage, Involute Spline – No-Go | 1 | |
| 2550726 | Gage, Concentricity, Lever Assy. | 1 | |
| 2561687 | GAGE, SETTING | 1 | |
| 6796371 | GAGE, RIVET, COUNT. SINK DEPTH | 1 | |
| 6796372 | GAGE, RIVET, HEAD DEPTH | 1 | |
| 6796373 | GAGE, TRIM, PB FACING | 1 | |
| 6796374 | GAGE, BORE DIA. PB FACING | 1 | |
| 6796377 | GAGE, GROOVE DEPTH PB FACING | 1 | |
| 6796378 | GAGE, CONCENTRICITY ANGLE | 1 | |
| 6796535 | ADAPTER GAGE, TURBINE ROTOR TO VANE AXIAL CLEARANCE | 3 | |
| 6796641 | GAGE, PLUG, CROSSOVER TUBE | 2 | |
| 6796739 | GAGE, SPACING, GROOVE PB FACING | 1 | |
| 6796740 | GAGE,WIDTH, GROOVE, PB FACING | 1 | |
| 6796871 | GAGE, DEPTH, TORQUEMETER PICKUP MOUNTING PAD | 2 | |
| 6796989 | GAGE, RING, PINION GEAR BRG. | 1 | |
| 6797564 | GAGE, PINION DRIVE GEAR BUSHING | 2 | |
| 6797571 | GAGE, DEPTH | 2 | |
| 6797645 | GAGE, RING, MAIN DR. GEAR BRG. | 1 | |
| 6797648 | GAGE, RING, FRT. PINION GEAR BRG. | 1 | |
| 6797978 | GAGE, ANGLE AND DIAMETER, PROPELLER BRAKE INNER CONE, | 1 | |
| 6798782 | GAGE,PROFILE | 1 | |
| 6798783 | GAGE,PROFILE | 1 | |
| 6798784 | GAGE,COMPARATOR,AIR | 1 | |
| 6799576 | GAGE,PD DIAL BORE INTERNAL SPLINE | 1 | |
| 6799577 | GAGE,PD DIAL BORE INTERNAL SPLINE | 1 | |
| 6799578 | GAGE,PD DIAL BORE INTERNAL SPLINE | 2 | |
| 6799579 | GAGE,PD DIAL BORE INTERNAL SPLINE | 1 | |
| 6799635 | GAGE, ALIGNING, TURBINE CLAMP BOLT NUT | 1 | |
| 6799683 | Master â Gage, Checking Air Inlet Housing Pilot O.D. | 2 | |
| 6799795 | GAGE, RING, MAIN DR. GEAR BRG. | 1 | |
| 6799821 | GAGE,RING,TORQUEMET | 1 | |
| 6872461 | GAGE, WIDTH, COMPRESSOR VANE ASSEMBLY SEAL GROOVE, | 1 | |
| 6899957 | GAGE, F/NZ | 2 | |
| 8743890 | GAGE,PRESSURE,DIAL | 1 | |
| 23002242 | GAGE, IND. 1ST STG BLADE TIP SHAKE | 1 | |
| 23002243 | GAGE, IND. 2ND STG BLADE TIP SHAKE | 1 | |
| 23003629 | GAGE,INDICATING,INTERNAL | 1 | |
| 23003630 | GAGE,PROFILE | 1 | |
| 23006764 | GAGE, RETAINING RING SAGS | 2 | |
| 23055268 | GAGE, COMPRESSOR- TIEBOLT STRETCH | 2 | |
| 23068571 | GAGE, VARIABLE VANE ADJUSTMENT | 1 | |
| 23083891 | GAGE, SAGS RETAINING RING | 1 | |
| 23083892 | GAGE, SAGS RETAINING RING | 1 | |
| 23090699 | GAGE, GO--NO--GO, NO. 5 BEARING RETAINING RING | 1 | |
| 23090722 | GAGE, ACCESSORY-GEARBOX MAGNETIC-SEAL RETAINING RING | 1 | |
| 247C5039 | GAGE, LENGTH-BLADE HPTR STG 1-2 | 1 | |
| 247C5318 | GAGE, SIGHT - S3-S5 LEVER | 1 | |
| 25-1009-SW-02L-XSG C4 | GAGE, AIR PRESSUR, 0-100# | 1 | |
| 25-1009A-XFWNH-02B-30PSI | GAGE,DIFFERENTIAL,DIAL INDICATIN | 1 | |
| 25502-28 | GAGE, PRESSURE OUTLET | 1 | |
| 272-B | GAGE, FILLET AND RAD | 1 | |
| 281469-1 | GAGE, GEAR POSITIONING (GAGE) | 1 | |
| 281873-1-1 | GAGE, ELONGATION, TURBINE WHEEL SHAFT | 1 | |
| 281988-1-1 | Gage, Shim Clearance | 1 | |
| 284241-1-1 | Holder, And Gage, Solenoid Rod Trimming | 1 | |
| 2843-006 | GAGE, MANDREL CHECK(1.0285) | 1 | |
| 285373-1-1 | GAGE, (MASTER), CURVIC COUPLING | 1 | |
| 287041-1 | GAGE, (MASTER), CURVIC COUPLING | 1 | |
| 287042-1 | GAGE, (MASTER), CURVIC COUPLING | 1 | |
| 289205-1 | GAGE, SHIM CLEARANCE | 1 | |
| 289459-1 | GAGE,SHIM CHECKING | 1 | |
| 289588-1 | GAGE, (MASTER), CURVIC COUPLING | 1 | |
| 289663-1 | GAGE, MASTER, CURVIC COUPLING | 1 | |
| 28A | GAGE, SMALL, 200-300 | 1 | |
| 291819-1 | GAGE, SHIM CHECKING | 1 | |
| 294299-1 | GAGE, PLENUM WALL THICKNESS | 1 | |
| 295296-1 | GAGE, (MASTER), CURVIC COUPLING | 1 | |
| 296079-1 | GAGE,STACK DIMENSION | 1 | |
| 296265-1 | GAGE, HEIGHT | 1 | |
| 296478-1 | GAGE, SHIM CHECKING | 1 | |
| 296797-2 | GAGE,POWER SECTION STACKING | 1 | |
| 297292-1 | (NSN: 5220-01-687-5924), GAGE, RING, MASTER SETTING | 1 | |
| 2C14096G02 | GAGE, SEATING CHECK | 1 | |
| 2C14276 | GAGE, INSPECT. FAN SHAFT TO HPT STATOR CASE | 1 | |
| 2C14276 REV A | GAGE, INSPECT. FAN SHAFT TO HPT STATOR CASE | 1 | |
| 2C14276G01 | GAGE, INSPECT ‐ FAN SHAFT TO HPT CASE | 1 | |
| 2C14276G01TK | GAGE, INSPECTION-FAN SHAFT TO HPT STATOR CASE | 1 | |
| 2C14656G01 | GAGE, CONCENTRICITY- | 1 | |
| 2C14656G02 | GAGE, CONCENTRICITY‐TRF | 3 | |
| 2C14774 | GAGE, FLOW AREA- HP TURBINE NOZZLE | 1 | |
| 2C14774G03 | GAGE, FLOW AREA -HPT NOZZLE STAGE 1 | 1 | |
| 2C14774G04 | GAGE, FLO AREA- HIGH-PRESSURE TURBINE NOZZLE | 1 | |
| 2C14777G01 | GAGE, INSPECT HPT TR | 1 | |
| 2C14796G01 | Gage,length-blade | 2 | |
| 2C14796G02 | GAGE, LENGTH - HPT ROTOR STAGE 2 BLADE | 2 | |
| 2C14805 | GAGE, TRAILING EDGE BOW - STAGE 1 HP TURB ROTOR BL | 1 | |
| 2C14867P01 | Gage,trailing edge thickness-hpc airfoils | 1 | |
| 2C18003G01 | GAGE, LPT ROTORSTATOR | 1 | |
| 2C5086 | GAGE, EXTENSION ACTUATOR | 1 | |
| 2C5086G01 | GAGE, ACT. EXTENSION | 3 | |
| 2C6096 | GAGE,INSP-LPT ROTOR TO FAN SHAFT | 1 | |
| 2C6130 | GAGE,IMMERSION DEPTH-IGNITER PLUG | 1 | |
| 2C6384 | GAGE, PLATE | 1 | |
| 2C641 | ASCROFT 0-5 PSI , +/- 1 PRESSURE GAGE, ¼ NPT X 2.5 DIA | 2 | |
| 2C6505 | GAGE, HIGH PRESSURE TURBINE NOZZLE OPEN AREA | 1 | |
| 2C6505G01 | GAGE, AREA-HPT NOZZLE, STAGE 1 | 1 | |
| 2C6505G02 | GAGE, AREA - HPT NOZZLE STAGE 1 | 1 | |
| 2C6540 | (RT) GAGE, INSPECTION - | 1 | |
| 2C6540G01 | GAGE, INSPECT-COMPRESSOR ROTOR | 1 | |
| 2C6541 | (RT) GAGE,INSP-HPCR-STG 11-13 | 1 | |
| 2C6541G01 | GAGE, INSPECT-COMPRESSOR ROTOR | 1 | |
| 2C6542 | (RT) GAGE,INSP-HPCR-STG 14-16 | 1 | |
| 2C6542G01 | Gage,inspection-comprrotor spool,stage14-16 | 1 | |
| 2C6547 | GAGE,INSPECT-COMPRESSOR REAR S | 1 | |
| 2C6547G01 | GAGE,INSPECT-COMPRESSOR REAR S | 1 | |
| 2C6589G01TK | GAGE, SEATING CHECK-INLET GEARBOX | 1 | |
| 2C6613 | GAGE,IMMERSION DEPTH-IGNITER PLUG | 2 | |
| 2C6613 REV D | GAGE, IMMERSION DEPTH-IGNITER PLUG | 1 | |
| 2C6613C01 | GAGE, IMMERSION DEPTH - IGNITER PLUG | 1 | |
| 2C6613G01 | GAGE, IMMERSION DEPTH ‐IGNITER PLUG | 10 | |
| 2C6646 | GAGE, OFF ENGINE | 1 | |
| 2C6646G01 | GAGE,VSV LEVER ARM INSPECTION | 1 | |
| 2C66I3 | GAGE, IMMERSION DEPTH-IGNITER PLUG | 1 | |
| 2C6846 | GAGE, 1ST STAGE HPT NOZZLE | 1 | |
| 2C6846G03 | GAGE, AREA-HPT NOZZLE STAGE 1 | 1 | |
| 2C6874 | GAGE, PROTRACTOR- LOW PRESSURE | 1 | |
| 2C6874 REV C | GAGE, PROTRACTOR- LOW PRESSURE | 1 | |
| 2C6920 | PIN, GAGE, FAN DISK - STAGE 1 | 2 | |
| 2C6920 REV A | PIN, GAGE, FAN DISK - STAGE I | 1 | |
| 2C6925 | GAGE, SET - VSV CLEVIS ASSEMBLIES | 2 | |
| 2C6925G02 | GAGE, SET -VSV CLEVIS ASSEMBLIES | 1 | |
| 2C6925G03 | SET,GAGE,VSV FOR GAS TURBINE APPLICATIONS | 1 | |
| 2C6925G05 | GAGE, SET - VARIABLE STATOR VANE CLEVIS ASSEMBLIES | 1 | |
| 2C6930G01 | GAGE,COMPARISON-S1 FAN BLD DVTL WE | 1 | |
| 2C6962G02 | GAGE, SIGHT - COMPRESSOR STATOR VANE ARMS | 1 | |
| 2C6962G03 | GAGE,SIGHT-VSV LEVERARMS | 5 | |
| 2C6962G05 | GAGE,VSV LEVER ARMS | 10 | |
| 2C6963 | GAGE, INSPECT-VSV LEVER | 1 | |
| 2C6965P05 | GAGE, VSV LEVER ARM | 1 | |
| 2C6966G05 | GAGE, SIGHT - COMPRESSOR STATOR VANE ACT ARMS 2C6966G05 | 7 | |
| 2C6966G07 | GAGE, VSV - LEVER ARM (I | 3 | |
| 2C7349 | GAGE, PADDLE | 1 | |
| 2C7349G01 | GAGE, PADDLE | 1 | |
| 2C8016 | GAGE,SIGHT-VARIABLE STATOR VANE-STG 5 AND 6 | 2 | |
| 2C8016 REV A | GAGE, SIGHT-VARIABLE STATOR VANE STG. 5 & 6 | 1 | |
| 2C8016G01 | GAGE,SIGHT-VSV LEVER ARMS STG5 | 3 | |
| 2C8016G02 | GAGE, SIGHT | 4 | |
| 2C8016G03 | GAGE,SIGHT-VARIABLE STATOR VANE-STG 5 AND 6 | 2 | |
| 2C80616G01 | GAGE,SIGHT-VARIABLE STATOR VANE-STG 5 AND 6 | 1 | |
| 2C8063 | GO/NO GO GAGE, INSPECT-SPLINED ADAPTOR | 1 | |
| 2C8063 REV C | GO/NO GO GAGE, INSPECT-SPLINED ADAPTOR | 1 | |
| 2C8064 | GO/NO GO GAGE, INSPCT-SPLINED ADAPTOR | 1 | |
| 2C8064 REV C | GO/NO GO GAGE, INSPCT-SPLINED ADAPTOR | 1 | |
| 2C8064G02 | GAGE, INSPECT - MUFF | 1 | |
| 2C80I6 | GAGE, SIGHT-VARIABLE STATOR VANE STG. 5 & 6 | 1 | |
| 2C81044P01 | Gage，"GO"-snap ring assembly | 1 | |
| 2C81133G01 | Gage，bumper wear-fan disk | 1 | |
| 2C81303P02 | GAGE, AREA - HPT, STAGE 1 NOZZLE | 2 | |
| 2C81577G01 | GAGE, TEF SCAVENGE TUBE POSITION | 1 | |
| 2C91008P01 | GAGE, COMPRESSOR STATOR VARIABLE VANE ANGLE | 1 | |
| 2C91069 | GAGE,INSPECT LEAD.EDGE-FAN BLD | 1 | |
| 2C91089G01 | GAGE, HPT SHROUD | 1 | |
| 2C91389 | GAGE,SIGHT, VANE ANGLE | 1 | |
| 2C91395G01 | GAGE, COMPRESSOR BLADE DOVETAIL INSPECTION | 1 | |
| 2GE22 | Gage,Coating,Ferrous/Non Ferrous,40 Mils | 1 | |
| 2J12625 | GAGE, INSPECTION | 1 | |
| 2M14166 | GAGE, INSPECTION - LPT, BLADE STAGE 3 | 1 | |
| 2M14167 | GAGE, INSP - LPT BLADE STG 4 | 1 | |
| 2M14170 | GAGE, INSPECTION | 1 | |
| 2ME140W9255 | GAGE, INSPECTION - LPT, BLADE STAGE 3 | 2 | |
| 30389-0016 | X-C Force Gage, Lbs 5000x50 | 2 | |
| 304-00006 | GAGE, PRESSURE | 6 | |
| 30R0326 | WALL THICKNESS GAGE,T700 PT | 1 | |
| 30R0598G01 | GAGE, V-GROOVE AFT FAN CASE (ANGLE C GAGE) | 1 | |
| 3694-3 | Gage, sTi | 1 | |
| 38-66901-01 | GAGE, TEXT PROX. | 1 | |
| 38DL-PLUS | GAGE,THICKNESS,ELECTRONIC | 1 | |
| 3C3420G03 | GAGE, INSPECTION-FAN ROTOR TO LPT, SHAFT EATING | 1 | |
| 3J13152 | Gage, Shape | 1 | |
| 4096461-613P01 | GAGE, GO-NO-GO (STAGE 9 VANE AIRFOILS) | 1 | |
| 4096461-613P02 | GAGE, GO-NO-GO (STAGE 10 VANE AIRFOILS) | 1 | |
| 4096461-613P03 | GAGE, GO-NO-GO (STAGE 11 VANE AIRFOILS) | 1 | |
| 440Z-3RL | GAGE,DEPTH,MICROMETER | 1 | |
| 45-135030-9 | GAGE, TRIM TAB | 4 | |
| 45A10001-001/810-2 | TRAVEL GAGE, FLAP L.H. | 2 | |
| 482-086 | PRESS.GAGE,400 PSI,W/NIST CERT (MALABAR) | 1 | |
| 482-087 | VAC GAGE,30/0HG,W/NIST CERT (MALABAR) | 1 | |
| 5006586-WEAR GAGE | WEAR GAGE, TOOL KEY | 1 | |
| 571-214 | GAGE,DEPTH,RULE | 1 | |
| 571-214-30 | GAGE,DEPTH,RULE | 1 | |
| 599-586-18 | GAGE, HEIGHT | 1 | |
| 60087018 | GAGE, SNAP | 1 | |
| 60087019 | GAGE, SNAP | 1 | |
| 6010916M03-5M | GAGE, PRECISIONIARE 3 COLUMN | 1 | |
| 6043T34 | GAGE, RING, QUICK CHECK TYPE EX | 1 | |
| 612118-G | GAGE, VERIFICATION | 1 | |
| 612548-G | GAGE, VERIFICATION | 1 | |
| 630074-GC | GAGE, FOR .432" HEX | 1 | |
| 630129-GA | GAGE, FOR 630129 4.95MM | 1 | |
| 630129-GB | GAGE, FOR 630129 5.5MM | 1 | |
| 630130-GB | GAGE, FOR 630130 (.270 HEX) | 1 | |
| 630145-G | GAGE, FLAT, FOR .165 HEX | 1 | |
| 630147-1GA | GAGE, FOR 630147-2 | 1 | |
| 630147-2GB | GAGE, FOR 630147-2 | 1 | |
| 631027-GA | GAGE, FLAT, FOR .042 HEX | 1 | |
| 631027-GB | GAGE, FLAT, FOR .056 HEX | 1 | |
| 643JZ | DIAL DEPTH GAGE, 1/8 | 11 | |
| 644JZ | DIAL DEPTH GAGE, 0-3 RANGE, 0-100 DIAL, .001 G | 5 | |
| 651C-3 | GAGE,TORQUE | 1 | |
| 65C17194 | GAGE, STRIKER POINT | 1 | |
| 65C17197 | GAGE, AFT SNUBBER | 1 | |
| 67514-101 | ENVELOPE GAGE, D31516-XXX | 1 | |
| 67515-101 | ENVELOPE GAGE, D31517-XXX | 1 | |
| 67597571 | GAGE, DEPTH | 1 | |
| 67808-101 | ENVELOPE GAGE, AFT DOOR | 2 | |
| 67809-101 | ENVELOPE GAGE, FORWARD DOOR | 2 | |
| 68D50058-1001 | GAGE, PROFILE | 1 | |
| 6C2058 | GAGE, SEAL RIM CALIPER | 1 | |
| 6C2058G01 | GAGE, SEAL RIM CALIPER | 1 | |
| 6T112X6 | SLING - HOT BRAKE, TYPE 1, WIRE MESH, GALVANIZED HIGH CARBON; 6 IN. WIDE, 12 GAGE, 6FT LONG MESH, 7FT LONG OVER ALL. | 3 | |
| 6T212X6 | SLING - HOT BRAKE, TYPE 1, WIRE MESH, GALVANIZED HIGH CARBON;6 IN. WIDE, 12 GAGE, 6FT LONG MESH, 7FT LONG OVER ALL. | 3 | |
| 700-381002-TFIX4 | PRESSURE GAGE, GRAY LINE | 1 | |
| 7C2068G01 | Gage, orientation-hpt interstage seal | 1 | |
| 81100ST1-015003 | LEVER-ADJUSTMENT GAGE, | 10 | |
| 81700SB3- 002051 | GAGE,ADJUSTMENT-LEVERS,CAPT,F.O. SEATS | 13 | |
| 81700SB3-002-051 | GAGE,ADJUSTMENT-LEVERS,CAPT,F.O. SEATS | 13 | |
| 81700SB3-002051 | GAGE,ADJUSTMENT-LEVERS,CAPT,F.O. SEATS | 13 | |
| 81700SB3-00251 | GAGE, ADJUSTMENT LEVER | 1 | |
| 81700ST1-015003 | GAGE, ADJUSTMENT-LEVERS, CAPT, F.O. SEATS | 15 | |
| 81700STI-015003 | GAGE, ADJUSTMENT LEVER | 1 | |
| 829B | GAGE,SMALL HOLE | 2 | |
| 834887-1 | GAGE, IGV | 1 | |
| 856A-1259-G02 | Gage, Seating Chk, Core Mod to IGB | 1 | |
| 856A-1300-G02 | Gage, Length, Core Engine Module | 10 | |
| 856A1068 | GAGE, LOCKING LUG COMPR. ROTOR ASSY | 1 | |
| 856A1068 (G02) | GAGE, LOCKING LUG - COMPRESSOR ROTOR ASSEMBLY | 11 | |
| 856A1068 REV E | GAGE, LOCKING LUG COMPR. ROTOR ASSY | 1 | |
| 856A1068G01 | GAGE, LOCKING LUG - COMPRESSOR ROTOR ASSEMBLY (LOCKING LUG GAGE) | 1 | |
| 856A1068G02 | GAGE, LOCK LUG | 11 | |
| 856A1206 | GAGE, RUNOUT - CDP SEAL | 1 | |
| 856A12060G6 | GAGE, RUNOUT CDP SEA | 1 | |
| 856A1206G05 | Gage,runout cdp seal | 2 | |
| 856A1206G06 | GAGE, RUNOUT CDP SEAL | 9 | |
| 856A1206G07 | GAGE, RUNOUT CDP SEAL | 3 | |
| 856A1259 | GAGE, SEATING CHECK-CORE MODUE TO IGB | 1 | |
| 856A1259 REV J | GAGE, SEATING CHECK-CORE MODUE TO IGB | 1 | |
| 856A1259G02 | GAGE, SEATING CHECK – CORE MODULE TO IGB (SEATING CHECK GAGE) | 1 | |
| 856A1259G04 | GAGE, SEATING CHECK - CORE MODULE TO IGB (SEATING CHECK GAGE) | 3 | |
| 856A1259G05 | GAGE, SEATING CHECK-CORE MODUE TO IGB | 1 | |
| 856A1260 | GAGE, ID - INTER STAGE SEAL HPCS | 1 | |
| 856A1260P01 | GAGE, ID - INTER STAGE SEAL HPCS | 6 | |
| 856A1275 | GAGE, CORD LENGTH HPCR BLADE | 1 | |
| 856A1275G04 | GAGE,LENGTH COMPRESSOR ROTOR BLADES | 6 | |
| 856A1276 | GAGE, EDGE THICKNESS, HPCR BLADE | 1 | |
| 856A1276G02 | Gage, Edge Thickness - Compressor Rotor Blades (edge gage thickness set) | 6 | |
| 856A1300G02 | Gage, Length - Core Engine Module (core engine length gage) | 10 | |
| 856A1331 | GAGE,SET-IGV, STG. 1,2,3 CAR. STATOR VANE CLEVIS | 1 | |
| 856A1331 REV D | GAGE,SET-IGV, STG. 1,2,3 CAR. STATOR VANE CLEVIS | 1 | |
| 856A1372G01 | GAGE,HPTR FWD OUT SEAL ARM BOW | 6 | |
| 856A1372G01 | GAGE, ARM BOW - HIGH PRESSURE TURBINE ROTOR FORWARD OUTER SEALEQUIVALENT | 6 | |
| 856A1376G01 | GAGE, THICKNESS | 1 | |
| 856A1387G01 | GAGE, THICKNESS - VANE SECTOR COMPRESSOR STATOR (GAGE) | 3 | |
| 856A1387G02 | GAGE, THICKNISS-VANE SECTOR, COMPR | 2 | |
| 856A1388 | GAGE, SEATING CHECK - CORE MODULE TO 1GB (GAGE) | 1 | |
| 856A1388G01 | GAGE, SEATING CHECK - CORE MODULE | 6 | |
| 856A1388G02 | GAGE, SEATING CHECK - CORE MODULE TO INLET GEARBOX | 1 | |
| 856A1392G01 | GAGE, SEATING CHECK | 1 | |
| 856A1439P01 | GAGE, ID - INTER STAGE SEAL HPCS | 1 | |
| 856A1441G01 | GAGE, FLOW AREA - HP TURBINE NOZZLE (FLOW AREA GAGE) | 1 | |
| 856A1441G02 | GAGE, FLOW AREA - HP TURBINE NOZZLE (FLOW AREA GAGE) | 2 | |
| 856A1560 | GAGE, ID – INNER STAGE SEALS | 1 | |
| 856A1809 | GAGE, CHORD LENGH HPCR BLD | 1 | |
| 856A1809G01 | GAGE, CHORD LENGTH-COMPR ROTOR | 5 | |
| 856A1814 | GAGE,CHORD THICK HPCR BLD | 1 | |
| 856A1814G01 | Gage, Edge Thickness Compresspr | 8 | |
| 856A1818 | GAGE, SEATING CHECK - CORE MODULE TO INLET GEAR BO | 2 | |
| 856A1818 G02 | GAGE, SEATING CHK, CORE MOD TO IGB | 8 | |
| 856A1818G01 | GAGE, SEATING CHECK | 3 | |
| 856A1818G02 | GAGE, SEATING CHECK-CORE MODULE TO | 8 | |
| 856A2405G01 | TOOL-GAGE,LEADING | 1 | |
| 856A2660 | GAGE, MEASUREMENT-LPT | 1 | |
| 856A2660G01 | GAGE, MEASURE | 5 | |
| 856A2660G03 | GAGE, MEASURE - AXIAL CLEARANCE - LPT (MEASURE GAGE) | 1 | |
| 856A2660G09 | GAGE, MEASURE - AXIAL CLEARANCE - LPT (MEASURE GAGE) | 2 | |
| 856A2660G10 | GAGE, MEASURE - AXIAL CLEARANCE - LPT (MEASURE GAGE) | 4 | |
| 856A2664 | GAGE, SETTING - VBV DOORS | 4 | |
| 856A2664G01 | GAGE, SETTING - VBV DOORS | 24 | |
| 856A2664G01 | GAGE, SETTING - VARIABLE BLEED VALVE DOORS | 24 | |
| 856A2757G01 | Gage, Positioning - LPT Outer Stationary Air Seal, Stage 1 (positioning gage) | 4 | |
| 856A2993 | GAGE, SEATING CHECK-CORE MODULE TO IGB | 1 | |
| 856A2993G01 | Gage, Seating Check - Core Module to IGB | 4 | |
| 856A2997 | GAGE, SEATING CHECK CORE MODULE TO IGB | 1 | |
| 856A2997G01 | GAGE, SEATING CHECK-CORE MODULE TO IGB | 3 | |
| 856A3408G02 | GAGE, SETTING VBV DOOR YOKE | 13 | |
| 856A3453G01 | GAGE, LENGTH - CORE ENGINE MODULE | 2 | |
| 856A3629P02 | GAGE, INSPECTION | 11 | |
| 856A4192G01 | GAGE, MID-CHORD LENGTH | 2 | |
| 856A4194G01 | GAGE, DIAMETER - OUTER LINER | 1 | |
| 856A4209 | (RT) GAGE, DIAMETER-OUTER LINER SUP | 1 | |
| 856A4209G02 | GAGE, DIAMETER - OUTER LINER SUPPORT RING | 2 | |
| 856A4209G03 | GAGE, DIAMETER-OUTER LINER SUPPORT | 1 | |
| 856A4622G01 | GAGE, CHECK DISTORTION OF STAGE 4 OUTER STATIONARY AIR SEAL | 1 | |
| 856A4633G02 | GAGE, FAN DISK DOVETAIL SLOTS | 13 | |
| 856A4638 | GAGE, BUCKLING CHECK - LPT BLADES 1-4 | 1 | |
| 856A4638G01 | GAGE, BUCKLE CHECK -LPT STAGE 1-4 NOT ESSENTIAL TO START | 1 | |
| 856A5522G02 | GAGE, BLADE TIP NOTCH | 1 | |
| 856A5687G01 | GAGE, FAN DISK DOVETAIL SLOTS | 3 | |
| 856A5814G01 | GAGE,FAN DISK DOVETAIL SLOT | 1 | |
| 856A5909G02 | GAGE, BUCKLING CHECK - LPT BLADES, STAGE 1-4 (CHECK GAGE) NOT ESSENTIAL TO START | 1 | |
| 856A5931G01 | GAGE # GAGE, FAN DISK DOVETAIL SLOTS | 2 | |
| 856A5942 | GAGE, FAN DISK DOVETAIL SLOTS | 1 | |
| 856A5942G02 | GAGE, FAN DISK DOVETAIL SLOTS | 2 | |
| 856A6629G03 | GAGE, DOVE TAIL SLOT 0~0.015IN | 10 | |
| 856A6802G01 | GAGE, FAN DISK DOVETAIL SLOT | 1 | |
| 856AI068 | GAGE, LOCKING LUG COMPR. ROTOR ASSY | 1 | |
| 859R1003 | GAGE, INSPECTION - SHROUD HANGER HP TURBINE STATOR (INSPECTION GAGE) | 1 | |
| 89391-000 | GAGE, FEELER, (PRESSURE ROLLER ALIGNMENT) | 1 | |
| 8C2157 | GAGE, LOCKING LUG - COMPRESSOR ROTOR ASSEMBLY | 1 | |
| 8C2362 | GAGE, TAPER - FAN BLADE/CASE | 1 | |
| 8C2764 | GAGE, RADIAL - CDN ASSEMBLY | 1 | |
| 8C2768G01 | Gage,seating stage 1 hanger pin | 1 | |
| 9016D47-1 | GAGE, MOUNTING FLANGE | 1 | |
| 9448M19 | GAGE, HOLE LOCATION, HPT ROTOR | 1 | |
| 9448M19G01 | GAGE, HOLE LOCATION, HPT ROTOR | 1 | |
| 9448M25 | GAGE, FUNCTIONAL PIN HPT ROTOR | 1 | |
| 9448M25G01 | GAGE, FUNCTIONAL PIN HPT ROTOR | 1 | |
| 95-93034-0001 | RIGGING FEELER GAGE, | 1 | |
| 956A1238G01 | GAGE, DEPTH –IGNITER | 5 | |
| 956A3281G01 | Gage,length-core enegine module | 1 | |
| 97A27003000-007 | GAGE,ASSY - PUSH-PULL | 21 | |
| 97A27003000000 | GAGE,ASSY-PUSH-PULL | 6 | |
| 97A27003000001 | GAGE,ASSY-PUSH-PULL | 3 | |
| 97A27003000002 | GAGE GAGE,ASSY-PUSH-PULL (CALIBRATION) | 12 | |
| 97A27003000003 | GAGE,ASSY - PUSH-PULL | 5 | |
| 97A27003000004 | GAGE,ASSY-PUSH-PULL | 5 | |
| 97A27003000005 | GAGE,ASSY - PUSH-PULL | 8 | |
| 97A27003000006 | GAGE,ASSY-PUSH-PULL | 4 | |
| 97A27003000007 | GAGE,ASSY-PUSH-PULL | 21 | |
| 97A2700300007 | GAGE, ASSY-PUSH-PULL | 1 | |
| 97A27902016000 | GAGE,ASSY-PUSH-PULL | 9 | |
| 98A27003000007 | GAGE,ASSY-PUSH-PULL | 1 | |
| 98A27608015200 | SETTING GAGE,COMPL. | 1 | |
| 98A55308440001 | GAGE, ZERO POSITION - SLATS | 18 | |
| 98D27804012000 | Gage, Rigging | 13 | |
| 98D27804013000 | Gage, Go/No Go, Slats | 12 | |
| 98F27508206001 | GAGE, END STOP - FLAP ACTUATOR | 9 | |
| 98F27508230001 | GAGE, FLAP LOWER END STOP | 12 | |
| 98F27808205001 | GAGE, ZERO POSITION - SLATS | 17 | |
| 98F27808205002 | GAGE, CENTER - SLAT TRACK 16 | 1 | |
| 98F27808205003 | GAGE, CHECK - SLAT TRACK 16 | 1 | |
| 98L27508485000 | GAGE, END - FLAP LE STEP | 3 | |
| 98L27508486001 | GAGE, END - GRA STOP | 3 | |
| 98L27808493000 | GAGE, ZERO POSITION - SLAT | 1 | |
| 98L27808493001 | GAGE, ZERO POSITION - SLAT | 4 | |
| 98L27808556001 | GAGE, RIG - DROOP NOSE | 6 | |
| 9C1022G01 | GAGE, IMERSION DEPTH | 1 | |
| 9C1138 | GAGE, ORIENTATION - MID-SEAL, | 1 | |
| 9C1138G01 | GAGE, ORIENTATION MID SEAL HPT | 1 | |
| 9C1341 | GAGE, FAN BLADE/CASE TAPER | 1 | |
| 9C1341P01 | GAGE, TAPER - FAN BLADE/CASE | 2 | |
| 9C3010G01 | GAGE, FAN MID SHAFT TO SHAFT NUT | 1 | |
| A12834 | GAGE, PRESSURE INLET 5000 PSI | 1 | |
| A27001-2 | Rigging Gage, Inboard Aileron PCA | 3 | |
| A27089-1 | GAGE, RIGGING I.E. | 1 | |
| A32094-1 | GAGE, OVERCENTER NLG LOCK LINK | 6 | |
| A3Q | GAGE, MEASURING | 3 | |
| A42705 | GAGE, CONE BOLT NUT HEIGHT | 1 | |
| A768-210-30 | Gage, High Pressure | 2 | |
| A768-210-6 | GAGE, LANDING GEAR STRUT | 1 | |
| A768-2106 | GAGE, LANDING GEAR STRUT SERVICING LOW PRESSURE | 1 | |
| AB25001-SU8 | GAGE,ADJUSTMENT-LEVERS,CAPT,F.O. SEATS | 1 | |
| AE1P16092 | GAGE, IGNITER | 1 | |
| AFG 500 | FORCE GAGE, PUSH/PULL GAGE | 1 | |
| AFG-500 | FORCE GAGE, PUSH/PULL GAGE | 1 | |
| AGE-12845 | GAGE, LINEAR MOVEMENT | 1 | |
| AGE11390 | GAGE, LINEAR MOVEMENT | 1 | |
| AGE11963 | GAGE, LIN MVT | 1 | |
| AGE12196 | GAGE, LINEAR | 2 | |
| AGE12845 | GAGE, LINEAR MOVEMENT | 1 | |
| AGE13266 | GAGE, LINEAR MOVEMENT | 1 | |
| AGE13579 | GAGE, HEIGHT | 1 | |
| AGM06009 | GAGE, (EQUIVALENT TO M22520/6-009) | 1 | |
| AK2061-GB | GAGE, .068 HEX CAVITY | 1 | |
| ALG3H03 | INFLATOR-GAGE,PNEUMATIC TIRE | 1 | |
| AMT23154DA | DIE ASSEMBLY, 12 GAGE, SPECIAL | 1 | |
| AMTG4301 | GAGE, REF: M22440/43-1 | 2 | |
| AMTG4302 | GAGE, REF: M22440/43-2 | 2 | |
| B1-12100 | GAGE, CYLINDER | 1 | |
| B1-12101 | GAGE, CYLINDER | 1 | |
| B1-12102 | GAGE, CYLINDER | 1 | |
| B1-12103 | GAGE, CYLINDER | 1 | |
| B71034-34 | GAGE,PRESSURE,DIAL INDICATING | 1 | |
| CA85500-0005 | GAGE, PRESSURE | 2 | |
| CAG-41 | GAGE, COMBINATION | 1 | |
| CAG-50-1 | GAGE, COLD WORK MANDREL | 1 | |
| CAG-51 | GAGE, COMBINATION | 1 | |
| CAG-52 | GAGE, COLD WORK MANDREL | 1 | |
| CATPG2 | PIN PROTRUSION 'GO-NOGO' GAGE, HI-LOKS | 2 | |
| CBG-10-0-N-1 | GAGE, COMBINATION | 3 | |
| CBG-10-1-N-1 | GAGE, COMBINATION | 3 | |
| CBG-10-2-N-1 | GAGE, COMBINATION | 2 | |
| CBG-10-3-N-1 | GAGE, COMBINATION | 2 | |
| CBG-12-3-N-1 | GAGE, COMBINATION | 2 | |
| CBG-14-1-N-1 | GAGE, COMBINATION | 2 | |
| CBG-14-3-N-1 | GAGE, COMBINATION | 3 | |
| CBG-16-1-N-1 | GAGE, COMBINATION | 1 | |
| CBG-16-3-N-1 | GAGE, COMBINATION | 1 | |
| CBG-18-3-N-1 | GAGE, COMBINATION | 2 | |
| CBG-20-0-N-1 | GAGE, COMBINATION | 2 | |
| CBG-20-1-N-1 | GAGE, COMBINATION | 2 | |
| CBG-20-3-N-1 | GAGE, COMBINATION | 1 | |
| CBG-4-1-N-1 | GAGE, COMBINATION | 1 | |
| CBG-4-2-N-1 | GAGE, COMBINATION (SET 4-2-N) | 1 | |
| CBG-4-3-N-1 | GAGE, COMBINATION | 2 | |
| CBG-4-3-N-RA | GAGE, COMBINATION | 1 | |
| CBG-4-4-N-1 | GAGE, COMBINATION | 2 | |
| CBG-4-4-N-RA | GAGE, COMBINATION | 1 | |
| CBG-4-4-N-RA1 | GAGE, COMBINATION | 1 | |
| CBG-6-0-N-1 | GAGE, COMBINATION | 3 | |
| CBG-6-0-N-RA | GAGE, COMBINATION | 1 | |
| CBG-6-1-N-1 | GAGE, COMBINATION | 5 | |
| CBG-6-2-N-1 | GAGE, COMBINATION | 5 | |
| CBG-6-2-N-RA | GAGE, COMBINATION | 1 | |
| CBG-6-3-N-1 | GAGE, COMBINATION | 3 | |
| CBG-8-0-N-1 | GAGE, COMBINATION | 4 | |
| CBG-8-1-N-1 | GAGE, COMBINATION | 5 | |
| CBG-8-1-N-RA1 | COMBINATION GAGE, RT. ANGLE | 1 | |
| CBG-8-3-N-1 | GAGE, COMBINATION | 3 | |
| CBG10-0N1 | GAGE, COMBINATION | 3 | |
| CBMG-10-0-N | GAGE, COLD WORK MANDREL | 4 | |
| CBMG-10-1-N | GAGE, MANDREL CHECK (0.3090) | 4 | |
| CBMG-10-2-N | GAGE, FLUSH PIN, PLAIN CYLINDRICAL | 2 | |
| CBMG-10-3-N | GAGE, COLD WORK MANDREL | 2 | |
| CBMG-12-0-N | GAGE, MANDREL CHECK (0.3530) | 2 | |
| CBMG-12-2-N | GAGE, MANDREL CHECK (0.3857) | 2 | |
| CBMG-12-3-N | GAGE, COLD WORK MANDREL | 3 | |
| CBMG-14-1-N | GAGE, COLD WORK MANDREL | 2 | |
| CBMG-14-3-N | GAGE, COLD WORK MANDREL | 3 | |
| CBMG-16-1-N | GAGE, COLD WORK MANDREL | 2 | |
| CBMG-16-3-N | GAGE, COLD WORK MANDREL | 2 | |
| CBMG-18-2-N | GAGE, COLD WORK MANDREL | 1 | |
| CBMG-18-3-N | GAGE, COLD WORK MANDREL | 2 | |
| CBMG-20-0-N | GAGE, COLD WORK MANDREL | 2 | |
| CBMG-20-1-N | GAGE, COLD WORK MANDREL | 2 | |
| CBMG-20-3-N | GAGE, COLD WORK MANDREL | 1 | |
| CBMG-26-3-N | GAGE GAGE, MANDREL | 1 | |
| CBMG-4-1-N | GAGE, COLD WORK MANDREL | 1 | |
| CBMG-4-2-N | GAGE, COLD WORK MANDREL | 1 | |
| CBMG-4-3-N | GAGE, COLD WORK MANDREL | 1 | |
| CBMG-4-4-N | GAGE, MANDREL CHECK(0,1648) | 3 | |
| CBMG-6-0-N | GAGE, MANDREL CHECK (0.1734) | 3 | |
| CBMG-6-1-N | GAGE, MANDREL CHECK (0.1889) | 4 | |
| CBMG-6-2-N | GAGE, MANDREL CHECK (0.2064) | 4 | |
| CBMG-6-3-N | GAGE, COLD WORK MANDREL | 3 | |
| CBMG-8-0-N | GAGE, MANDREL CHECK (0.2294) | 5 | |
| CBMG-8-1-N | GAGE, MANDREL CHECK (0.2454) | 6 | |
| CBMG-8-2-N | GAGE, MANDREL CHECK (0.2611) | 4 | |
| CBMG-8-3-N | GAGE, MANDREL CHECK (0.2783) | 6 | |
| CBMG10-0N | GAGE GAGE, MANDREL | 4 | |
| CBMG10-2N | GAGE GAGE, MANDREL | 2 | |
| CBMG10-3N | GAGE GAGE, MANDREL | 2 | |
| CBMG12-0N | GAGE GAGE, MANDREL | 2 | |
| CBMG12-1N | GAGE GAGE, MANDREL | 2 | |
| CBMG14-2N | GAGE GAGE, MANDREL | 3 | |
| CBMG14-3N | GAGE GAGE, MANDREL | 3 | |
| CBMG16-0N | GAGE GAGE, MANDREL | 2 | |
| CBMG16-2N | GAGE GAGE, MANDREL | 2 | |
| CBMG16-3N | GAGE GAGE, MANDREL | 2 | |
| CBMG18-2N | GAGE GAGE, MANDREL | 1 | |
| CBMG20-1N | GAGE GAGE, MANDREL | 2 | |
| CBMG22-0N | GAGE GAGE, MANDREL | 1 | |
| CBMG22-1N | GAGE GAGE, MANDREL | 1 | |
| CBMG22-2N | GAGE GAGE, MANDREL | 1 | |
| CBMG24-2N | GAGE GAGE, MANDREL | 1 | |
| CBMG24-3N | GAGE GAGE, MANDREL | 1 | |
| CBMG26-0N | GAGE GAGE, MANDREL | 1 | |
| CBMG26-2N | GAGE GAGE, MANDREL | 1 | |
| CBMG26-3N | GAGE GAGE, MANDREL | 1 | |
| CBMG28-0N | GAGE GAGE, MANDREL | 1 | |
| CBMG28-1N | GAGE GAGE, MANDREL | 1 | |
| CBMG28-2N | GAGE GAGE, MANDREL | 1 | |
| CBMG28-3N | GAGE GAGE, MANDREL | 1 | |
| CBMG30-0N | GAGE GAGE, MANDREL | 1 | |
| CBMG30-1N | GAGE GAGE, MANDREL | 1 | |
| CBMG30-2N | GAGE GAGE, MANDREL | 1 | |
| CBMG32-3N | GAGE GAGE, MANDREL | 1 | |
| CBMG4-0N | GAGE GAGE, MANDREL | 1 | |
| CBMG4-1N | GAGE GAGE, MANDREL | 1 | |
| CBMG4-2N | GAGE, MANDREL CHECK (0.13) | 1 | |
| CBMG4-3N | GAGE GAGE, MANDREL | 1 | |
| CBMG4-4N | GAGE GAGE, MANDREL | 3 | |
| CBMG6-1N | GAGE GAGE, MANDREL | 4 | |
| CBMG6-3N | GAGE GAGE, MANDREL | 3 | |
| CBMG8-0N | GAGE GAGE, MANDREL | 5 | |
| CBMG8-1N | GAGE GAGE, MANDREL | 6 | |
| CBMG8-3N | GAGE GAGE, MANDREL | 6 | |
| CG22 | GAGE, CONTACT,ELECTR | 9 | |
| COM-1557 | GAGE, ASSY - PUSH-PULL | 2 | |
| CRES-17-4 PH | GAGE,INSPECTION | 2 | |
| CS-AGE-EQ106 | INFLATOR-GAGE, PNEUM | 1 | |
| CT-450 | GAGE, SPARK PLUG GAP, RETRACTABLE | 7 | |
| DBS-2102 | 1/4" SNGL STEP BAND TOOL, GAGE, AND KEY | 2 | |
| DBS-2202 | 1/8" SNGL STEP BAND TOOL, GAGE, AND KEY | 2 | |
| DHG49 | GAGE,HEIGHT | 1 | |
| DLT5302-031-01 | GAGE,MARKING,TUBE FITTING | 3 | |
| DPP-50 | FORCE GAGE, PUSH/PULL GAGE 0-50LB (FUNDO DE ESCALA 0,2) | 6 | |
| DPPH-200 | GAGE, FORCE 0~200 LBS, PUSH-PULL_0~200LBSFORCEGAGE_[DPPH-200] | 1 | |
| DPPH50 | PUSH-PULL GAGE, DIAL | 1 | |
| DS-B1-12102 | GAGE,CYLINDER | 1 | |
| DSR2829-08 | GAGE, TIRE PRESSURE | 2 | |
| DTC-643B | FORCE GAGE, PUSH/PULL GAGE 0-50 LB. | 1 | |
| DV1016 | GAGE,PRESSURE,DIAL INDICATING | 1 | |
| EHC-09DL-CW | GAGE, HAND HELT UT DIGITAL THICKNESS | 1 | |
| EUS309-G | GAGE, ROUND, FOR EUS309 SEL #4 | 1 | |
| EUS309-G1 | GAGE, ROUND, FOR EUS309, APC309 SEL #1 | 1 | |
| Eagle OPT-XM00-002-A | EXPANDED GAGE PACKAGE (COOLANT TEMP GAGE, OIL PRESURE GAGE, TRANSMISSION TEMP, TACHOMETER & VOLMETER | 1 | |
| F80198-12 | PLUG GAGE, LG NUT | 18 | |
| F80198-13 | PLUG GAGE, LANDING GEAR NUT | 11 | |
| F80198-15 | PLUG GAGE, UNDERSIZE - NOSE LANDING | 9 | |
| F80198-16 | Plug gage, MLG axle Unit | 7 | |
| F80198-17 | PLUG GAGE, UNDERSIZE - MAIN LANDING GEAR NUT | 3 | |
| F80198-19 | PLUG GAGE, UNDERSIZE - NOSE LANDING GEAR NUT | 2 | |
| FB-325A | GAGE,THICKNESS:STRAIGHT,3.312" BLADE LG | 8 | |
| FB-335 | GAGE,THICKNESS:STRAIGHT,3.312" BLADE LG | 6 | |
| FB335 | GAGE,THICKNESS | 6 | |
| FB3355 | GAGE,THICKNESS:STRAIGHT,3.312" BLADE LG | 1 | |
| FDK-10 | GAGE, FORCE, PUSH/PULL | 1 | |
| FMG-647-30010-B | GAGE, MANDREL CHECK (1.6859) | 1 | |
| FMI-100C5 | FORCE GAGE, PUSH/PULL GAGE RANGE 0-50LBS PULLFORCE, PEAK FORCE RECORDING | 1 | |
| FSG-1501-35010A | FORCEMATE STARTING HOLE GAGE, NOMINAL (CLASS 1) | 1 | |
| FSG-1501-35110A | FORCEMATE STARTING HOLE GAGE, 1ST OVERSIZE (CLASS 2) | 1 | |
| FSG-1911-35010A | STARTING HOLE GAGE, NOMINAL SIZE | 1 | |
| FSG-1911-35110A | STARTING HOLE GAGE, 1ST OVERSIZE | 1 | |
| FTG-483-A-0 | GAGE, FORCETEC MANDREL | 1 | |
| FTG-483-A-0-1 | COMBINATION GAGE, FORCETEC MANDREL (NOMINAL) | 1 | |
| FTG-483-A-1-1 | COMBINATION GAGE, FORCETEC MANDREL (1ST OVER) | 1 | |
| FTG-483-A-2-1 | COMBINATION GAGE, FORCETEC MANDREL (1ST OVER) | 1 | |
| FTMG-3-0-3 | GAGE, MANDREL CHECK | 1 | |
| FTMG-483-A-0 | GAGE, MANDREL CHECK (0.2471) | 1 | |
| FTMGAM20-0G0 | GAGE, MANDREL CHECK (.3129) | 1 | |
| FTMGAM20-0N0G0 | GAGE, MANDREL CHECK (.3120) | 1 | |
| FZ9-24-600 | GAGE,PRESSURE,DIALINDIATING (600 PSI) | 8 | |
| G1122 | GAGE, GO/NO-GO M22520/39-03 GMT1090 | 2 | |
| G1327 | GAGE,GO-NO-GO | 1 | |
| G22705 | GAGE,PRESSURE,DIAL 0-60PSI | 1 | |
| G28026-1 | GAGE, GO-NO-GO, AUXILLARY | 1 | |
| G30001 | BLOCK -0 HEIGHT GAGE, WIPER ARM | 1 | |
| G30001-1 | BLOCK -0 HEIGHT GAGE, WIPER | 3 | |
| G32004-5 | Gage, Rotation | 7 | |
| G32004-6 | GAGE,ROTATION | 3 | |
| G32004-7 | GAGE,CLAMP-UP | 3 | |
| G32021-18 | EQUIPMENT - FORCE GAGE, LANDING GEAR LEVER | 15 | |
| G4039L | GAGE, 4 INCH GLYCERINE FILLED | 1 | |
| G411 | GAGE, 3 STEP | 6 | |
| G4308 | GAGE, PRESSURE, DIAL INDICATING:0-2000 PSI | 1 | |
| G713 | (MTO)-M22520/39-02 GAGE, 4 STEP | 2 | |
| GA246 | GAGE, TIRE PRESSURE | 1 | |
| GA47567-110-A | GAGE, PRESSURE, DIAL INDICATING | 1 | |
| GA47567-140-A | GAGE,PRESSURE,DIAL INDICATING,(0-25BAR) | 1 | |
| GF-813S | GAGE, HYDRAULIC | 1 | |
| GP-10S | GAGE, HYDRAULIC | 4 | |
| GP10S | GAGE, HYDRAULIC PRESSURE | 4 | |
| GS10621 | GAGE, TEMP. SIMULATING | 1 | |
| GS11901-1 | GAGE, BLADE ALIGNMENT INDICATOR | 1 | |
| GS12993-15 | GAGE, DC ACTUATOR | 1 | |
| GS12993-16 | GAGE, DC ACTUATOR | 1 | |
| GS13158-1 | GAGE, DISPLACEMENT | 1 | |
| GS13564-1 | GAGE, GEAR ADJUSTMENT | 1 | |
| GS13807-1 | GAGE, ALIGNMENT | 1 | |
| GS13847-1 | GAGE, SPINNER REWORK | 1 | |
| GS13966-1 | GAGE,N1, SPLINE WEAR | 1 | |
| GS14807-1 | GAGE, #60-SPLINE, NO-GO | 1 | |
| GS14874-1 | GAGE, PLUG | 2 | |
| GS15625-1 | GAGE, KIT WIRE | 1 | |
| GS18040-4 | GAGE, FORCE | 1 | |
| GS18257 | GAGE, RING | 1 | |
| GS18258 | GAGE, RING | 1 | |
| GS18260 | GAGE, PLUG | 1 | |
| GS20230-1 | GAGE, SERVO STOP SET | 1 | |
| GS20772-1 | GAGE, RIGGING | 1 | |
| GS20781-1 | GAGE, THICKNESS | 2 | |
| GS207811 | GAGE, THICKNESS | 2 | |
| GS21986 | Gage, Location | 1 | |
| GS21987 | Gage, Location | 1 | |
| GS22000 | Gage, Diameter | 1 | |
| GS22032-1 | GAGE, ALIGNMENT | 1 | |
| GS22422-1 | GAGE, FEEDBACK SHAFT | 1 | |
| GS22520-1 | GAGE, ALIGNMENT PLUG | 2 | |
| GS24113-1 | GAGE, SCRIBE/TRIM | 1 | |
| GS24114-1 | GAGE, SCRIBE/TRIM | 1 | |
| GS24515-1 | GAGE,COATING THICKNESS | 1 | |
| GS24589-1 | GAGE, BLADE ALIGNMENT | 1 | |
| GSE5100758 | PUSH -PULL GAGE, 5-50 POUNDS | 1 | |
| GSE5100761 | PUSH-PULL FORCE GAGE, (0 - 50 POUNDS)-GSE5100761 & GSE5100758 | 1 | |
| GTP-534-30A0 | GAGE,DIFFERENTIAL,DIAL INDICATIN | 1 | |
| H-2318 | GAGE, PRESSURE, 0-15 PSI (0-1.03 BAR) | 1 | |
| H-2630 | GAGE, VERTICAL SPEED | 1 | |
| H-2657 | GAGE, PRESS 0-60 PSI/BAR | 3 | |
| H-2890-01 | GAGE, CAPSUHELIC | 3 | |
| HC-1042 | GAGE,PRESSURE,DIAL INDICATING;|06-5004 | 4 | |
| HC-2144 | GAGE,DIFFERENTIAL,DIAL INDICATING;|SYSTEM PRESSURE GAUGE;HYDRULIC POWER UNIT (MODEL 5241) FOR TESTING HELLI 429 | 5 | |
| HC-2146 | GAGE, PRESSURE, DIAL INDICATING | 3 | |
| HC-2279 | GAGE,PRESSURE,DIAL INDICATING;GAGE PRESSURE 0-5000 | 4 | |
| HC1399 | GAGE, TIRE PRESSURE,SELF-CONTAINE | 4 | |
| HS 8550 | GAGE, INDICATOR, BLADE ALIGNMENT | 2 | |
| HS8550 | GAGE, INDICATOR, BLADE ALIGNMENT | 2 | |
| HSP1401 | GAGE, TAPER BORE | 1 | |
| HU20604 | GAGE, POSITION OF I.D.G. COOLER TO L.P. COMPRESSOR FAN CASE RB211 | 1 | |
| HU24461 | THREAD GAGE, SIZE 0.190 - 32 / IN. | 3 | |
| HU24462 | THREAD GAGE, SIZE 0.250 - 28 / IN. | 3 | |
| HU24463 | THREAD GAGE, SIZE 0.3125 - 24 / IN. | 3 | |
| HU24464 | THREAD GAGE, SIZE 0.375 - 24 / IN. | 3 | |
| HU24465 | THREAD GAGE, SIZE 0.4375 - 20 / IN. | 3 | |
| HU24466 | THREAD GAGE, SIZE 0.500 - 20 / IN. | 3 | |
| HU24467 | THREAD GAGE, SIZE 0.5625 - 18 / IN. | 3 | |
| HU24468 | THREAD GAGE, SIZE 0.625 - 18 / IN. | 3 | |
| IAE1J12509 | GAGE, AXIAL | 1 | |
| IAE1J12510 | GAGE, AXIAL | 1 | |
| IAE1J12528 | GAGE, SETTING | 1 | |
| IAE1M14115 | GAGE, CHECKING GO | 2 | |
| IAE1M14116 | GAGE, CHECKING NO GO | 2 | |
| IAE1M14117 | GAGE,CHECKING-GO NO GO | 11 | |
| IAE1M14118 | GAGE, CHECKING - GO/NO GO | 9 | |
| IAE1M14121 | GAGE, CHECKING-GO/ NO GO | 9 | |
| IAE1M14122 | GAGE, CHECKING-GO/ NO GO | 8 | |
| IAE1M14137 | GAGE, CHECKING - GO/NO GO | 1 | |
| IAE1M14138 | GAGE, CHECKING - GO/NO GO | 1 | |
| IAE1P16042 | GAGE, IGNITER | 13 | |
| IAE1P16092 | GAGE, IGNITER | 14 | |
| IAE1P16697 | GAGE GAGE, IGNITER | 1 | |
| IAE1R19313 | GAGE, BAYONET SLOT WEAR | 7 | |
| IAE2F10141 | GAGE, CLERANCE | 1 | |
| IAE2F10418 | GAGE, LENGTH | 1 | |
| IAE2J12614 | GAGE, CONTACT ANGLE | 1 | |
| IAE2J13056 | Gage, wear | 9 | |
| IAE2J13314 | GAGE, EROSION - ENGINE ASSY, IGNITER PLUG | 2 | |
| IAE2M14176 | GAGE, INSPECTION | 1 | |
| IAE2M14178 | GAGE, INSPECTION | 1 | |
| IAE2M14179 | GAGE, INSPECTION | 1 | |
| IAE2M14180 | GAGE, INSPECTION | 1 | |
| IAE2M14186 | GAGE, INSPECTION | 3 | |
| IAE2M14187 | GAGE, INSPECTION | 3 | |
| IAE2R19541 | GAGE, BAYONET SLOT WEAR | 1 | |
| IAE3J13516 | GAGE, SETTING | 10 | |
| IAE3J13517 | GAGE, SETTING | 8 | |
| IAE3R19016 | GAGE, PROFILE | 2 | |
| IAE3R19017 | GAGE, PROFILE | 2 | |
| L135M6501210 | GAGE, SETTING - VBV DOORS | 1 | |
| L60010-662 | GAGE GAGE, FEELER | 1 | |
| LG-050 | GAGE, PUSH-PULL | 8 | |
| LG-50 | GAGE, PUSH-PULL | 1 | |
| LG-50KG | GAGE, PUSH-PULL | 8 | |
| LG100 | GAGE,ASSY-PUSH-PULL | 10 | |
| LST50677 | JOBBERS DRILL GAGE, 1/16-1/2" RANGE, STEEL | 1 | |
| LST52616 | TELESCOPING GAGE, SET | 1 | |
| LST52617 | TELESCOPING GAGE, SET | 1 | |
| LST65662 | DEPTH GAGE, ELECTRONIC | 1 | |
| LT-27 | GAGE, LORD MOUNT, AFT | 1 | |
| LTCT11338 | GAGE,SPECIAL | 1 | |
| LTCT11350X | Gage, Fourth Stage Power Turbine Blade | 1 | |
| LTCT1229 | GAGE, BACKLASH | 1 | |
| LTCT14681 | Gage, Concentricity & Squareness | 1 | |
| LTCT1581 | Gage, Elongation | 1 | |
| LTCT2099 | GAGE, BACKLASH | 1 | |
| LTCT3653 | GAGE, CONTOUR | 1 | |
| LTCT5645 | Gage, Setting Flow Fence | 1 | |
| LTCT7154 | Gage, Electrical | 1 | |
| LTCT7197 | Gage, Depth, Module | 1 | |
| LTCT7538-01 | Kit, Checking Gage, Fourth Turbine Rotor Disc | 2 | |
| LTCT7538-02 | Kit, Checking Gage, Fourth Turbine Rotor Disc | 2 | |
| LTCT7538-03 | Kit, Checking Gage, Fourth Turbine Rotor Disc | 1 | |
| LTCT7538-04 | Kit, Checking Gage, Fourth Turbine Rotor Disc | 3 | |
| LTCT7859 | Gage, Checking | 1 | |
| LTCT9071 | Gage, Pressure, Dial Indicating | 1 | |
| M22520-3-2 | Military Specification M225203-2 Gage, Crimping Tool | 1 | |
| M22520/3-1 | GAGE, INSPECTION | 11 | |
| M22520/6-008 | GAGE, INSPECTION | 1 | |
| M8348-B-1 | GAGE,PRESSURE,DIAL INDICATING | 1 | |
| M8348-B1A | GAGE,PRESSURE,DIAL | 1 | |
| M85352/3-1 | GAGE,PRESSURE,DIAL INDICATING | 1 | |
| MME-PD459 | INFLATOR-GAGE, PNEUMATIC TIRE | 1 | |
| NTG2604MSB | PRESSURE GAGE,TIRE | 3 | |
| P611845 | GAGE, BRUSH WEAR CHECKING | 10 | |
| PWA 102832 | GAGE, CROSS SHROUD/CROSS NOTCH (TYPE 1 BLADES) | 1 | |
| PWA 102835 | GAGE, SHROUD | 1 | |
| PWA 102839 | GAGE, CROSS SHROUD/CROSS NOTCH (TYPE 2 BLADES) | 1 | |
| PWA 107152 | GAGE, TILT INSPECTION | 1 | |
| PWA 112010 | GAGE, HYDRAULIC PRESSURE − HYDRAULIC PUMP REPLACES 75048 | 1 | |
| PWA 29156 | GAGE, CHECKING-ENGINE ASSY, FAN CASE RUB STRIP | 8 | |
| PWA 81011 | GAGE, INDICATOR FLUSH PIN | 1 | |
| PWA 81970 | GAGE, INDICATOR | 1 | |
| PWA 85178 | GAGE, ASSEMBLY | 1 | |
| PWA101022 | GAGE, GO-NO, GO_[PWA101022] | 1 | |
| PWA101089 | GAGE, GO-NO, GO_[PWA101089] | 1 | |
| PWA101211 | GAGE, CROSS SHROUD - FAN BLADE | 1 | |
| PWA101211 REV NC | GAGE, CROSS SHROUD - FAN BLADE | 1 | |
| PWA101674 | GAGE, SHROUD | 3 | |
| PWA102072 | GAGE, FLUSH PIN (OPTIONAL) | 1 | |
| PWA102126 | GAGE,LENGTH | 1 | |
| PWA102282 | GAGE,PROFILE | 3 | |
| PWA102835 | GAGE, SHROUD | 1 | |
| PWA102844 | GAGE, INDICATOR (REPLACED BY PWA 102903) | 1 | |
| PWA102903 | GAGE, INDICATOR (REPLACES PWA 102844) | 1 | |
| PWA104199 | GAGE, IMMERSION | 4 | |
| PWA104225 | Gage, Cross Notch | 1 | |
| PWA104226 | Gage, Cross Notch | 1 | |
| PWA104227 | Gage, Cross Notch | 1 | |
| PWA107152 | GAGE, TILT INSPECTION | 1 | |
| PWA107214 | GAGE, CHECKING | 3 | |
| PWA111592 | GAGE, INDICATOR BACKLASH , #3 BEARING PINION GEAR | 1 | |
| PWA111677 | GAGE, INSPECTION-HPT , 2ND STAGE VANE | 1 | |
| PWA111727 | GAGE, GO/NO HPT ROTAR 2. AFT MINI DISK | 2 | |
| PWA111859 | GAGE, INSPECTION | 1 | |
| PWA111860 | GAGE, INSPECTION -LPC,2ND STAGE LUG SEAL | 1 | |
| PWA111861 | GAGE,INSPECTION -LPC, 1ST STAGE VANE LUG | 1 | |
| PWA112010 | GAGE, HYDRAULIC PRESSURE - HYDRAULIC PUMP (REPLACES PWA 75028) | 1 | |
| PWA115296 | Gage, Inspection | 1 | |
| PWA17224 | Gage, master | 1 | |
| PWA17286 | GAGE,PROFILE | 1 | |
| PWA17401 | GAGE,PROFILE | 1 | |
| PWA1805-216 | GAGE,PLUG,PLAIN CYLINDRICAL | 1 | |
| PWA20048 | GAGE, ANGLE | 1 | |
| PWA211254 | GAGE,INDICATOR-HPC, REAR HUB | 1 | |
| PWA25915 | GAGE, CLASSIFICATION - LPT 5TH STG VANE_[PWA25915] | 2 | |
| PWA25917 | GAGE,CLASSIFICATION - LPT 6TH VANE_[PWA25917] | 1 | |
| PWA25944 | GAGE, STATOR - HPC 12,13 & 14TH VANE ANG_[PWA25944] | 1 | |
| PWA26644 | GAGE, BLADE WEAR - HPC 5TH STAGE_[PWA26644] | 2 | |
| PWA26646F | GAGE, BLADE WEAR - HPC 7TH STAGE_[PWA26646F] | 1 | |
| PWA26647 | GAGE, BLADE WEAR - HPC 8TH STAGE_[PWA26647] | 2 | |
| PWA26649 | GAGE, BLADE WEAR - HPC 10TH STG BLADE_[PWA26649] | 2 | |
| PWA26651H | GAGE, BLADE WEAR - HPC 12TH STAGE_[PWA26651H] | 1 | |
| PWA26652 | GAGE, BLADE WEAR - HPC 13TH STAGE_[PWA26652] | 2 | |
| PWA26683 | GAGE, BLADE WEAR - HPC 14TH STAGE_[PWA26683] | 2 | |
| PWA27021 | GAGE, CALIPER - TURB C/A/NOZZ W/THK_[PWA27021] | 1 | |
| PWA27720 | GAGE, CLASSIFICATION - 1ST TURB VANE_[PWA27720] | 2 | |
| PWA27850 | GAGE, STRETCH - LPC 2,3 & 4 TIERODS_[PWA27850] | 2 | |
| PWA28007 | GAGE, NO GO - FAN BLD INNER MIDSPAN_[PWA28007] | 1 | |
| PWA28008 | GAGE, NO GO - WEAR, 1ST FAN BLD H/FACE_[PWA28008] | 1 | |
| PWA28120 | GAGE, STRETCH - LPT SOLID TIEROD_[PWA28120] | 1 | |
| PWA28222 | GAGE, NO GO - HPC 5TH STAGE CHORD WIDTH_[PWA28222] | 1 | |
| PWA28223 | GAGE, NO GO - HPC 6TH STAGE CHORD WIDTH_[PWA28223] | 1 | |
| PWA28224 | GAGE, NO GO - BLADE, HPC 7TH STG CHORD_[PWA28224] | 1 | |
| PWA28225 | GAGE, NO GO - HPC 8TH STAGE CHORD WIDTH_[PWA28225] | 1 | |
| PWA28226 | GAGE, NO GO - HPC 9TH STAGE CHORD WIDTH_[PWA28226] | 1 | |
| PWA28227 | GAGE, NO GO - HPC 10TH STAGE CHORD WIDTH_[PWA28227] | 1 | |
| PWA28228 | GAGE, NO GO - HPC 11TH STG CHORD WIDTH_[PWA28228] | 1 | |
| PWA28229 | GAGE, NO GO - HPC 12TH STAGE CHORD WIDTH_[PWA28229] | 1 | |
| PWA28230 | GAGE,NO GO - HPC 13TH STG CHORD WIDTH_[PWA28230] | 1 | |
| PWA28231 | GAGE, NO GO - HPC 14TH STAGE CHORD WIDTH_[PWA28231] | 1 | |
| PWA28232 | GAGE, NO GO - HPC 15TH STAGE CHORD WIDTH_[PWA28232] | 1 | |
| PWA28252D | GAGE, AXIAL DEFLECTION - LPT 4TH STG VAN_[PWA28252D] | 1 | |
| PWA28253 | GAGE, AXIAL DEFLECTION - LPT 5TH STG VAN_[PWA28253] | 1 | |
| PWA28254 | GAGE, AXIAL DEFLECTION - LPT 6TH STG VAN_[PWA28254] | 1 | |
| PWA28462 | GAGE,POSITION-GEARBOX CSD TRANSFER TUBE.RETAINING RING | 3 | |
| PWA28939 | GAGE, POSITIONING - 3.0 BLEED CONTROL_DIA.12.7X261.6MM/0.225KG_[PWA28939] | 2 | |
| PWA29073 | GAGE, BLOCK - 3.0 MODUL BLD SWITCH_[PWA29073] | 1 | |
| PWA29156 | GAGE, CHECKING | 8 | |
| PWA29340A | GAGE, FLUSH PIN - IMC #2 BRG SEATING_[PWA29340A] | 1 | |
| PWA33782 | GAGE,NO GO-2ND & 4TH STS TURB DISK-PLANE SLOT WEAR | 1 | |
| PWA33782 REV A | GAGE,NO GO-2ND & 4TH STS. TURB. DISK,-PLANE SLOT WEAR | 1 | |
| PWA45411 | GAGE, DIFFERENTIAL PRESSURE | 1 | |
| PWA46319 | GAGE, INPROCESS INSPECT - FAN BLADE L.E. REWORK | 2 | |
| PWA46319 REV NC | GAGE, INPROCESS INSPECT - FAN BLADE L.E. REWORK | 1 | |
| PWA463I9 | GAGE, INPROCESS INSPECT - FAN BLADE L.E. REWORK | 1 | |
| PWA500456 | GAGE, PROFILE | 1 | |
| PWA51154 | GAGE, PROFILE | 1 | |
| PWA52626 | GAGE,PROFILE | 1 | |
| PWA55712 | GAGE, INDICATING, INT | 1 | |
| PWA75028 | GAGE, HYDRAULIC PRESSURE | 6 | |
| PWA75209 | GAGE,Z PLATE CONTACT_[PWA75209] | 2 | |
| PWA75532 | GAGE, TWIST | 1 | |
| PWA75533 | GAGE, SHROUD | 1 | |
| PWA75551 | GAGE,EROSN INSP-VANE,HPC 5TH STG LDNG & TRLNG EDGE | 1 | |
| PWA75551 REV B | GAGE,EROSION INSP-VANE,HPC 5TH STG LDNG & TRLNG EDGE | 1 | |
| PWA7555I | GAGE,EROSION INSP-VANE,HPC 5TH STG LDNG & TRLNG EDGE | 1 | |
| PWA75671 | GAGE, STRETCH | 1 | |
| PWA76334 | C GAGE, BLADE_[PWA76334] | 1 | |
| PWA76336 | C GAGE, BLADE_[PWA76336] | 1 | |
| PWA76338 | B GAGE, BLADE_[PWA76338] | 1 | |
| PWA80188 | GAGE,FORCE | 1 | |
| PWA80263 | GAGE, DIAL INDICATOR | 1 | |
| PWA80627 | GAGE, FIXTURE | 1 | |
| PWA80705 | GAGE,INSPECTION | 1 | |
| PWA80706 | GAGE,INSPECTION | 1 | |
| PWA80707 | GAGE,INSPECTION | 1 | |
| PWA80709 | GAGE,INSPECTION | 1 | |
| PWA80883 | GAGE, FLUSH PIN | 1 | |
| PWA81011 | GAGE,INDICATOR FLUSH PIN | 1 | |
| PWA81112 | GAGE, TIEBOLT STRETCH | 1 | |
| PWA81133 | GAGE, DEPTH | 3 | |
| PWA81817 | GAGE, FORCE | 1 | |
| PWA81970 | GAGE, INDICATOR | 1 | |
| PWA83166 | GAGE, CHECKING | 1 | |
| PWA85504 | GAGE, INDICATOR | 1 | |
| PWA85842 | GAGE, FLUSH PIN | 3 | |
| PWA87514 | GAGE, INSPECTION PLUG | 3 | |
| PWA88281 | GAGE, INDICATOR | 1 | |
| PWC 55990 | GAGE, COUPLING VERNIER | 1 | |
| PWC30128-15 | GAGE, EDGE THICKNESS - COMPRESSOR ROTOR BLADES (EDGE GAGE THICKNESS SET) | 9 | |
| PWC30403 | GAGE, POSITION, PULLER DISK | 13 | |
| PWC30499-50 | GAGE, ACCESSORY GEARSHAFT | 7 | |
| PWC30675 | GAGE, SPLINE WEAR | 7 | |
| PWC31683 | RADIUS GAGE, SHROUD | 1 | |
| PWC32133 | GAGE, INTERNAL PRESSURE | 1 | |
| PWC32248 | GAGE, FORCE, DISK | 1 | |
| PWC32268-001 | GAGE, EROSION MEASUREMENT | 4 | |
| PWC32268-002 | GAGE, EROSION MEASUREMENT | 3 | |
| PWC32307 | GAGE, BLADE STRETCH | 1 | |
| PWC32380 | Gage, Shroud | 2 | |
| PWC32417 | GAGE, RADIUS | 1 | |
| PWC32807 | GAGE, COMPRESSOR | 2 | |
| PWC34061 | GAGE, AXIAL POSITION CHECK PWC34061 | 6 | |
| PWC34161 | GAGE,AXIAL POSITION CHECK PWC34161 | 4 | |
| PWC34407 | GAGE, TURBINE BLADE | 3 | |
| PWC34910-800 | GAGE, CHORD LENGTH-COMPR ROTORBLADE (3D AERO) | 10 | |
| PWC37060 | GAGE, BACKLASH, UPPER TOWERSHAFT BEVEL GEAR RUNOUT (NON-PROCURABLE) | 1 | |
| PWC37487 | Gage, LPT Bladed Disk Measuring | 3 | |
| PWC37980 | GAGE, LOW AND HIGH PRESSURE TURBINE SHROUD SEGMENT | 3 | |
| PWC38487 | GAGE, LPT BLADE DISK MEASURING | 5 | |
| PWC40660 | GAGE, SEAL RUNNER | 4 | |
| PWC45409 | GAGE, FEELER | 1 | |
| PWC48055 | GAGE, VALVE SETTING | 1 | |
| PWC50061 | GAGE,STRETCH (C) | 3 | |
| PWC50832 | FEELER GAGE, BLADE TIP | 1 | |
| PWC52161 | GAGE, FUEL PRESSURE MANIFOLD PRESSURE CHECK | 1 | |
| PWC54020 | GAGE, HIGH PRESSURE TURBINE BLADED DISK RADIUS | 4 | |
| PWC56166 | GAGE, BACKLASH, UPPER TOWERSHAFT BEVEL GEAR RUNOUT | 1 | |
| PWC57755 | GAGE, FLUSH PIN | 1 | |
| PWC60535 | GAGE, BLADE RIVET | 3 | |
| PWC64327 | GAGE, PT SETTING | 1 | |
| PWC65845 | GAGE, PT DISK | 1 | |
| PWC70789 | GAGE, POWER TURBINE | 3 | |
| PWC715 | GAGE, SHROUD | 1 | |
| PWC71568 | GAGE, SHROUD | 6 | |
| PWC71903 | GAGE, BLADE GROWTH | 4 | |
| RB T101656-145 | BEND ANGLE GAGE, TRIM TAB | 2 | |
| RB23006764 | GAGE, RETAINING RING SAGS | 3 | |
| RB6899957 | GAGE, F/NZ | 2 | |
| RBT101656-145 | BEND ANGLE GAGE, TRIM TAB | 2 | |
| RC5128P10 | "GO" GAGE, PIN BASE COAT | 1 | |
| RE168230021-143 | GAGE, FLUSH PIN, PLAIN CYLINDRICAL | 1 | |
| RV3004 | GAGE,RIVET SELECTOR | 1 | |
| SIC3500 | GAGE, HIGH PRESSURE | 1 | |
| SIC3500-001 | GAGE, LANDING GEAR STRUT | 8 | |
| SIC800-001 | GAGE, LANDING GEAR STRUT SERVICING, LOW PRESSURE | 1 | |
| SK215T-10012 | GAGE,INSPECTION | 1 | |
| SK215T10005 | GAGE,INSPECTION | 1 | |
| SR19GSDA | GAGE, SCREW THREAD | 3 | |
| SSTYPE301 | GAGE,INSPECTION,MAST | 2 | |
| ST-23 | GAGE, VALVE CLEARANCE 0.028”-0.080” | 2 | |
| ST-310 | LYCOMING™ ST-310 GAGE, FOR IO-360-N1A ENGINES | 3 | |
| ST-314 | GAGE,PLUG VALVE | 1 | |
| ST-81 | GAGE, FLAT PLUG REJECTION (INTAKE VALVE GUIDE ID) | 1 | |
| ST-91 | GAGE, COUNTERWEIGHT SQUARENESS | 1 | |
| ST-94 | GAGE, COUNTERWEIGHT BUSHING LOCATION | 1 | |
| ST131 | GAGE,BELT | 4 | |
| ST4130 | GAGE,INSPECTION | 1 | |
| ST61188-03 | Gage, Ring, Plain | 2 | |
| ST61920 | Gage, Comparator, Air | 2 | |
| ST62899 | Gage, Inspection | 1 | |
| ST63076 | Gage, Profile | 1 | |
| ST8709H-3 | GAGE, PROFILE | 5 | |
| ST8712H-14-BB-K-B | US PROTRUSION GAGE, .875 BMIN | 1 | |
| ST8712H-14-BB-K-P | US PROTRUSION GAGE, .875 PMAX | 1 | |
| ST8712H-6-BB-K-B | US PROTRUSION GAGE, .375 BMIN | 1 | |
| ST8712H-6-BB-K-P | US PROTRUSION GAGE, .375 PMAX | 1 | |
| ST8712H-8-BB-K-B | US PROTRUSION GAGE, .500, BMIN | 1 | |
| ST8712H-8-BB-K-P | US PROTRUSION GAGE, .500 PMAX | 1 | |
| ST8712P-B-8-0-1 | AD PROTRUSION GAGE, .500, BMIN | 1 | |
| ST8712P-B-9-0-1 | AD PROTRUSION GAGE, .562, BMIN | 1 | |
| ST8712P-P-8-0-1 | AD PROTRUSION GAGE, .500, PMAX | 1 | |
| ST8712PA-EK-9-0-T | EK PROTRUSION GAGE, .562 NON-RECESSED | 1 | |
| ST8712PA-EK-9-0-W | EK PROTRUSION GAGE, .562 RECESSED | 1 | |
| ST8712PC-8 | PROTRUSION GAGE, .500, SP1 AND SP2 | 1 | |
| ST8712PC-9 | PROTRUSION GAGE, .562 SP1 AND SP2 | 1 | |
| ST8721P-P-9-0-1 | AD PROTRUCSION GAGE, .562, PMAX | 1 | |
| STD-6878 | PITOT SYSTEM TEST GAGE, 30 TO 35 INCHES OF MERCURY (ABSOLUTE) | 1 | |
| STD2 | FEELER GAGE, 0.001 IN. (0,02 MM) | 1 | |
| T-236977 | Gage, indicator attachment | 1 | |
| T-304582 | Gage, Internal Spline | 3 | |
| T-304584 | Gage, Internal Spline | 1 | |
| T-304590 | GAGE, INTERNAL SPLINE | 1 | |
| T-304591 | Gage,Spline | 1 | |
| T-456058 | Gage,Internal Spline | 1 | |
| T101559 | GAGE,GRIP SPACING | 1 | |
| T101656-145 | BEND ANGLE GAGE, TRIM TAB | 1 | |
| T300488 | GAGE,RING,PLAIN | 1 | |
| T304273 | RING, AIR GAGE, LOW LIMIT | 1 | |
| T304274 | RING, AIR GAGE, HIGH LIMIT | 1 | |
| T304584 | GAGE, INTERNAL SPINE | 1 | |
| T304591 | GAGE, INTERNAL SPINE | 1 | |
| T71884 | GAGE, BAYONET SLOT WEAR | 15 | |
| TES-5512 | Gage,Stator | 1 | |
| TES-5512PM | GAGE,STATOR | 1 | |
| TI-6AL-6V-2SN | GAGE,INSPECTION | 3 | |
| TIFHD160 | GAGE,PRESSURE,DIAL | 2 | |
| TTL-300-DTG | GAGE, PRESSURE, DIAL | 3 | |
| U10580 | GAGE, ALIGNMENT | 1 | |
| VE00-01-95-46101-0003 | RIGGING FEELER GAGE, ELEVATOR CONTROL | 1 | |
| VE00-03-95-46101-0003 | RIGGING FEELER GAGE, ROLL CONTROL | 1 | |
| VEOO-01-35-46102-0003 | RIGING FEELER GAGE, RUDDER CONTROL (LH/RH) | 1 | |
| VEOO-01-35-46102-0004 | RIGING FEELER GAGE, RUDDER CONTROL (RH) | 1 | |
| VEOO-01-35-46102-0005 | RIGING FEELER GAGE, RUDDER CONTROL (LH) | 1 | |
| VEOO-01-35-46102-0006 | RIGGING FEELER GAGE, RUDDER CONTROL (RH) | 1 | |
| VEOO-02-95-46101-0003 | RIGGING FEELER GAGE, RUDDER CONTROL | 1 | |
| WCI-CBG-04-4-N-RA | GAGE, COMBINATION | 2 | |
| WCI-CBG-06-0-N-RA | GAGE, COMBINATION | 2 | |
| WCI-CBG-06-2-N-RA | GAGE, COMBINATION | 2 | |
| WCI-CBG-06-3-N | COMBINATION GAGE, 1/4" 1ST OVERSIZE Ø.2350-.2380 , Ø.2390 | 2 | |
| WCI-CBG-08-1-N | COMBINATION GAGE, 1/4" 1ST OVERSIZE Ø.2350-.2380 , Ø.2390 | 2 | |
| WCI-CBG-08-1-N-RA | COMBINATION GAGE, RT. ANGLE | 1 | |
| WCI-CBG-08-3-N | COMBINATION GAGE, 5/16" NOMINAL Ø.2830-.2860 , Ø.2870 | 2 | |
| WCI-CBG-10-2-N | GAGE, COMBINATION | 2 | |
| WCI-CBG-16-1-N | GAGE, COMBINATION | 2 | |
| WCI-CBG-20-3-N | GAGE, COMBINATION | 2 | |
| WCI-CBG-A41 | GAGE, COMBINATION | 1 | |
| WCI-CBG-A50 | GAGE, COLD WORK MANDREL | 1 | |
| WCI-CBG-A51 | GAGE, COMBINATION | 1 | |
| WCI-CBG-A52 | GAGE, COLD WORK MANDREL | 1 | |
| WCI-WGX-06-2 | MANDREL WEAR GAGE,FOR 7/32" NOMINAL FASTENER SIZ | 1 | |
| WCI-WGX-08-0 | MANDREL WEAR GAGE,FOR 1/4" NOMINAL HOLE SIZE | 1 | |
| WCI-WGX-08-1 | MANDREL WEAR GAGE,FOR 17/64" NOMINAL HOLE SIZE | 1 | |
| WCI-WGX-08-2 | MANDREL WEAR GAGE,FOR 9/32" NOMINAL FASTENER SIZ | 1 | |
| WCI-WGX-10-1 | MANDREL WEAR GAGE,FOR 21/64" NOMINAL FASTENER SI | 1 | |
| WCIS-WG-08-3-N | GAGE, MANDREL CHECK (0.2783) | 2 | |
| WCIS-WG-10-0-N | GAGE, MANDREL CHECK (0.3090) | 2 | |
| WCIS-WG-16-1-N | GAGE, COLD WORK MANDREL | 2 | |
| WCIS-WG-16-3-N | GAGE, COLD WORK MANDREL | 2 | |
| WCIS-WG-18-2-N | GAGE, COLD WORK MANDREL | 2 | |
| WCIS-WG-20-3-N | GAGE, COLD WORK MANDREL | 2 | |
| XPWA111727 | Gage,go-no go-hpt,rotor 2,aft mini disk | 1 | |
| Z67514-101 | PACK ENVELOPE GAGE, A320 FWD S | 1 | |
| Z67515-101 | PACK ENVELOPE GAGE, A320 AFT S | 1 | |
| lC5759 | GAGE, CONCENTRICITY-VARIABLE STATOR INTERSTAGE SEAL. FM | 1 | |
| lC5937 | GAGE, CONCENTRICITY-NO.5 BEARING INNER RING VERTICAL | 1 | |
| lC6096 | GAGE, IMMERSION DEPTH-IGNITER PLUG | 1 | |
| lC6345 | GAGE, CLEARANCE- OVERSPEED TRANSDUCER | 1 | |
| lC6838 | GAGE, CONCENTRICITY TRF | 1 | |
| lC6958 | GAGE, CONCENCTRICITY - TURB. MID FRAME | 1 | |
| lC802l | GAGE, RUNOUT COMPR. REAR SHAFT | 1 | |
| 67514-101 | ENVELOPE GAGE, FORWARD DOOR | 1 | |
| CBG-12-3-N-1 | GAGE, COMBINATION | 2 | |
| CBMG-12-3-N | GAGE, COLD WORK MANDREL | 3 | |
| 38DL PLUS | THICKNESS GAGE,ULTRASONIC,RANGE 0.080MM | 1 | |
| 60-3SPC | GAGE,COUNTERSINK,DIGITAL,60DEG ANGLE,.56 | 1 | |
| 97A32402018000 | PRESSURE GAGE,BRAKE BLOCK HYDRAULIC PRES | 5 | |
| 98A52307631000 | GAGE,MSW LEVER,USED TO MEASURE THE DOOR | 1 | |
| CHA141382 | CHECKING GAGE,END FLOAT | 6 | |
| DPG-011 | GAGE,PRESSURE,DIGITAL,RANGE 5000PSI,OD=3 | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
