| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 98D27507541000 | Flap Wrench | 10 | |
| ST2580-190 | FLAP WRENCH | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| .8125 WRENCH KIT | FLAP SWITCH WRENCH KIT | 1 | |
| .875 WRENCH KIT | FLAP SWITCH WRENCH KIT | 1 | |
| 1SF2348 | FLAP/NLG LIMIT WRENCH | 1 | |
| 25Y1571A | WRENCH - FLAP SCREWACTUATOR | 1 | |
| 269T9308-001 | Wrench, Assembly For Flapping Hinge | 2 | |
| 269T9308-1 | WRENCH, ASSEMBLY FOR FLAPPING HINGE | 1 | |
| 3MIT65B04008-12 | SPLINED WRENCH - TORQUE TUBE, INBOARD FLAP DRIVE | 1 | |
| 505T06847-001 | ROLLER-LOCKING WRENCH, FLAP SUR-FACE | 1 | |
| 57736 A 0000-01 | WRENCH FLAP POINT | 4 | |
| 5MIT65B81129 | ADAPTER ASSEMBLY - TORQUE WRENCH INBOARD TRAILING EDGE FLAP DRIVE, INBOARD TRANSMISSION | 2 | |
| 65-22958-1 | FLAP DRUM CHECKNUT WRENCH SET | 1 | |
| 98A27508038000 | SOCKET WRENCH SET - FLAP TRACK REAR ATTACHMENT | 2 | |
| 98A27508050000 | WRENCH-TURNING JIG,FLAP DRIVE SHAFT | 7 | |
| 98A27901020000 | WRENCH-OPERATING,SLAT FLAP ASYMMETRY PICK-OFFS | 2 | |
| 98A57704000002 | SOCKET WRENCH-FLAP TRACK | 1 | |
| 98A57704000003 | SOCKET WRENCH-FLAP TRACK | 1 | |
| 98D27504028000 | 2+3 FLAP TRACK WRENCH TOOL | 14 | |
| 98D27504029000 | 4 FLAP TRACK WRENCH TOOL | 12 | |
| 98D27504035000 | FLAP TRUNNION WRENCH TOOL | 20 | |
| 98D27504119000 | WRENCH,SPANNER;|SPANNER FLAP ADJUSTMENT; | 18 | |
| 98D27507536000 | SOCKET WRENCH - RETAINER NUT, TRACK 1FLAP TRACK ACT. LEVER RETAINER NUT WRENCH | 10 | |
| 98D27507541000 | WRENCH - BEARING, FLAP TO CARRIAGE TRACK 2 | 10 | |
| 98F57508702000 | ADAPTER-WRENCH,INBOARD FLAP | 4 | |
| 98F57508702001 | ADAPTER-WRENCH,INBOARD FLAP | 5 | |
| A27122-1 | WRENCH EQUIPMENT - BEARING RETAINING NUT, INBOARD FLAP LINKAGE | 4 | |
| A300-27-51-00-0253 | GROOVE WRENCH SET-FLAP SPIGOT | 1 | |
| A300-27-81-00-0246 | SPECIAL WRENCH SET-KRUEGER FLAP ACTUATOR | 1 | |
| A310-27-00-00-0284 | SOCKET WRENCH-FWD BEARING, FLAP TRACK 2 | 1 | |
| A57006-1 | SPANNER WRENCH - SPECIAL NUT, INBOARD TRAILING EDGE MAIN FLAP | 1 | |
| C27001-16 | ADAPTOR EQUIPMENT - TORCH WRENCH FLAP DRIVE TRANSMISSION | 7 | |
| C27017-1 | Adaptor Set - Torque Wrench T/E Flaps | 3 | |
| C27041 | WRENCH-COUPLING SLEEVE FLAP ACTUARION | 1 | |
| C27041-1 | Wrench - Coupling Sleeve, Flap Actuation | 11 | |
| C27041-2 | COUPLING SLEEVE FLAP ACTUATION WRENCH | 1 | |
| F70085 | FLAP GIMBLE BEARING WRENCH TOOL | 22 | |
| F71228 | FLAP T/E GEARBOX COUP. SPLINED WRENCH | 3 | |
| F71228-500 | FLAP T/E GEARBOX COUP. SPLINED WRENCH | 11 | |
| F72800 | WRENCH -0 FLAP TRANSMISSION GIMBAL NUT USED WITH | 1 | |
| F72802 | WRENCH -0 FLAP TRANSMISSION TORQUE USED TO | 1 | |
| F72802-1 | WRENCH XMISSION FLAP | 2 | |
| F72802-2 | WRENCH XMISSION FLAP | 1 | |
| F72803 | WRENCH -0 FLAP TRANS. TORQUE LIMITER USED TO | 1 | |
| F72803-1 | WRENCH XMISSION FLAP | 2 | |
| F72803-2 | WRENCH XMISSION FLAP | 1 | |
| F72804-1 | WRENCH XMISSION FLAP | 1 | |
| F72804-2 | WRENCH XMISSION FLAP | 1 | |
| F72805 | WRENCH -0 FLAP TRANSMISSION TORQUE LIMIT USED TO | 1 | |
| F72805-1 | WRENCH XMISSION FLAP | 2 | |
| F72805-2 | WRENCH XMISSION FLAP | 1 | |
| F72806 | WRENCH -FLAP TRANSMISSION TORQUE LIMITER USED | 1 | |
| F72806-1 | WRENCH XMISSION FLAP | 1 | |
| F72806-2 | WRENCH XMISSION FLAP | 1 | |
| F72897 | SPANNER WRENCH -0 THRUST NUT- TE FLAP CARRIAGE. | 1 | |
| F72897-1 | THRUST NUT FLAP KIT WRENCH | 4 | |
| F80017-23 | ADAPTOR EQUIPMENT - TORCH WRENCH FLAP DRIVE TRANSMISSION | 12 | |
| F80040-2 | ADAPTOR EQUIPMENT - TORCH WRENCH FLAP DRIVE TRANSMISSION | 29 | |
| F80122-11 | TRQ WRENCH - FLAP | 2 | |
| F80122-12 | ADAPTER EQPT-TORQUE WRENCH FLAP DRIVE TRANSMISSION | 5 | |
| F80122-13 | TRQ WRENCH - FLAP | 2 | |
| F80122-14 | TORQUE WRENCH-FLAP DRIVE TRANSMISSION | 13 | |
| F80122-15 | TORQUE WRENCH FLAP DRIVE TRANSMISSION | 12 | |
| F80122-16 | TORQUE WRENCH-FLAP DRIVE TRANSMISSION | 11 | |
| F80122-XX | Adapter Equipment -Torque Wrench. Flap Drive Transmission | 1 | |
| F80197-5 | Wrench Set - Limit Switch, Flap Control Unit | 25 | |
| F80197-6 | WRENCH-LIMIT SWITCH ,FLAP CONTROL UNIT | 3 | |
| F80197-6-7 | WRENCH SET-LIMIT SWITCH FLAP CONT UN | 1 | |
| F80197-7 | WRENCH-LIMIT SWITCH ,FLAP CONTROL UNIT | 3 | |
| F80216-1 | FLAP POSITION XMTR SUPPORT SPANNER WRENCH | 3 | |
| HS8111 | FLAPPER VALVE WRENCHING ADAPTER | 1 | |
| J27050-1 | WRENCH - COUPLING SLEEVE, FLAP ACTUATION | 6 | |
| J27050-2 | Wrench - Coupling Sleeve, Flap Actuator | 1 | |
| J27051-1 | WRENCH - WING TE FLAP SUPPORT NUT | 9 | |
| J27074 | SPANNER WRENCH-TORQUE TUBE,INBOARD MAIN FLAP | 1 | |
| J27074-1 | SPANNER WRENCH - TORQUE TUBE, INBOARD MAIN FLAP | 10 | |
| J27110 | WRENCH - NUT, WING TE FLAP SUPPORT SPL-15305 | 1 | |
| J27110-1 | Wrench-nut,wing trailing edge flap support | 1 | |
| K27033 | WRENCH - WING TRAILING EDGE FLAP SUPPORT NUT | 1 | |
| K27033-1 | WRENCH SET - WING TRAILING EDGE FLAP SUPPORT NUT | 3 | |
| K27036-1 | WRENCH EQUIPMENT - ECCENTRIC BUSHING ADJUSTMENT, TRAILING EDGE FLAPS | 8 | |
| K27036-1 | WRENCH EQPT-ECCENTRIC BUSHINGADJUSTMENT,TE FLAPS | 8 | |
| LL537A334 | WRENCH FLAP BALLSREW | 1 | |
| MIT65-56638-1 | FLAP POSITION WRENCH | 1 | |
| MIT65B02025 | TORQUE WRENCH ADAPTER ASSEMBLY - MIDFLAP INBOARD TRAILING EDGE | 1 | |
| MIT65B19248 | WRENCH SET - TRAILING EDGE FLAPS | 1 | |
| MIT65B83853 | WRENCH - TRAILING EDGE FLAP TRANSMISSION | 1 | |
| SE27-5104 | Spanner Wrench - Flap Position and Stall Warning XMTR | 1 | |
| SL90-314-7500 | Spoiler & Flaps wrench | 24 | |
| SPL-5384 | Wrench - Coupling Sleeve Flap Actuation | 1 | |
| ST2580-145B | WRENCH MODIFIED - INBOARD LEADING EDGE FLAPS | 1 | |
| ST2580-189 | WRENCH FLAP | 1 | |
| ST2580-190 | WRENCH FLAP | 1 | |
| ST2580-422 | SPANNER WRENCH FLAP | 6 | |
| T01001247 | MD-11 OUTBD FLAP FTG WRENCH | 1 | |
| U21972 | ADJUSTMENT WRENCH FOR FLAPPER ASSEMBLY | 1 | |
| f 80197-5 | wrench set limit switch flap cont Unit | 25 | |
| f80197-5 | wrench set limit switch flap cont Unit | 25 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
