| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 2550144 | Fixture - Holding | 2 | |
| 25Y1319A | FIXTURE - HOLDING | 1 | |
| 6795922 | Fixture - Holding | 1 | |
| 6795924 | Fixture - Holding | 1 | |
| 6795925 | Fixture - Holding | 1 | |
| 6795927 | Fixture - Holding | 1 | |
| 6796598 | FIXTURE - HOLDING | 1 | |
| 6796977 | FIXTURE - HOLDING | 1 | |
| 6872416 | FIXTURE - HOLDING | 1 | |
| 6872499 | FIXTURE - HOLDING | 1 | |
| 6872937 | FIXTURE - HOLDING | 1 | |
| 6872946 | FIXTURE - HOLDING | 1 | |
| AJ65B81127 | FIXTURE - HOLDING | 1 | |
| AJ65B81128 | FIXTURE - HOLDING | 1 | |
| AJ65B81129 | FIXTURE - HOLDING | 1 | |
| PWC62771 | FIXTURE - HOLDING | 1 | |
| T27260 | FIXTURE - HOLDING | 1 | |
| T27360 | FIXTURE - HOLDING | 1 | |
| T304270 | FIXTURE - HOLDING | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| F70320-1 | Holding Fixture - Control Column | 10 | |
| 100000-S96-3 | HOLDING FIXTURE-PIN REMOVAL-MANIFOLD | 1 | |
| 16A11193-3 | FIXTURE ASSY, HOLDING - RIB/SPAR, BL 71, LH | 1 | |
| 16A11194-3 | FIXTURE ASSY, HOLDING - RIB/SPAR, BL 71, RH | 1 | |
| 16A11195-3 | FIXTURE ASSY, HOLDING - RIB/SPAR, EL 120, LH | 1 | |
| 16A11196-3 | FIXTURE ASSY, HOLDING - RIB/SPAR, EL 120, RH | 1 | |
| 18C1028 | FIXTURE, TEST/HOLDING - NO 5 BRG HOUSING | 1 | |
| 18C1508 | FIXTURE, HOLDING - NO. 1 BEARING AFT INNER RACE | 1 | |
| 1C6001 | FIXTURE, HOLDING- LOW PRESSURE TURBINE ROTOR FORWA | 1 | |
| 1C6896 | FIXTURE, HOLDING - PTR TO TRF | 1 | |
| 1C6896G01 | FIXTURE, HOLDING - PTR TO TRF | 1 | |
| 1C6908 | FIXTURE, HOLDING - COMPRESSOR | 1 | |
| 1C6908G01 | FIXTURE, HOLDING - COMPRESSOR | 1 | |
| 21C8861G01 | FIXTURE, HOLDING, TORQUE - MOUNT, ENGINE FRONT | 1 | |
| 23008710 | FIXTURE----HOLDING GAS PRODUCER ROTOR | 3 | |
| 23033031 | FIXTURE--HOLDING, FRONT BEARING HOUSING 7 | 1 | |
| 23033043 | FIXTURE--HOLDING, SERIES II 4TH STAGE NOZZLE | 1 | |
| 23037982 | FIXTURE--HOLDING, COMPRESSOR FIRST-, SECOND-, THIRD-, AND FOURTH-STAGE VANE ASSEMBLY | 1 | |
| 247C5168 | FIXTURE, HOLDING - ACTUATING SYSTEM (LMS100) | 1 | |
| 2C14104G01 | FIXTURE, HOLDING - NO.4 BRG AFT INNER RACE | 3 | |
| 2C14722G01 | FIXTURE - RUNOUT HOLDING | 4 | |
| 2C6259G05 | FIXTURE, HOLDING - VARIABLE STATOR ARMS, | 1 | |
| 2C6549 | FIXTURE, HOLDING - | 1 | |
| 2C6549G01 | FIXTURE, HOLDING-COMPRESSOR | 1 | |
| 2C7145 | FIXTURE,HOLDING-COMPRESSOR ROT | 1 | |
| 2C7145G01 | FIXTURE,HOLDING-COMPRESSOR ROT | 1 | |
| 2C7146 | FIXTURE,HOLDING-NO.4R BEARING | 1 | |
| 2C7146G01 | FIXTURE,HOLDING-NO.4R BEARING | 1 | |
| 2C7149 | FIXTURE,HOLDING-NO.4R BEAR SEA | 1 | |
| 2C7149G01 | FIXTURE,HOLDING-NO.4R BEAR SEA | 1 | |
| 2C7283G04 | FIXTURE, HOLDING - J | 1 | |
| 2C7399 | FIXTURE, HOLDING - FAN BLADE STG. 1 | 1 | |
| 2C7399 REV C | FIXTURE, HOLDING - FAN BLADE STG. I | 1 | |
| 2C81041 | FIXTURE, HOLDING/SHIPPING - HP | 1 | |
| 2C81041G01 | FIXTURE, HOLDING/SHIPPING - HP | 1 | |
| 2C81041G02 | FIXTURE - HOLDING, SHIPPING, HPT MODULE | 1 | |
| 2C81305G01 | FIXTURE, HOLDING - STAGE 2 NOZZLE | 1 | |
| 2C81431G01 | FIXTURE, HOLDING - HPT ROTOR | 1 | |
| 2C81801G01 | FIXTURE HOLDING - GENERAL PURPOSE | 1 | |
| 2C91097G01 | FIXTURE - OIL TANK HOLDING | 1 | |
| 2C91137G01 | FIXTURE-HOLDING FAN DISK | 1 | |
| 2C91186G01 | FIXTURE-HOLDING LPT | 1 | |
| 2C91288P01 | FIXTURE - HOLDING - TRANSITION CASING | 1 | |
| 2C91354 | FIXTURE, HOLDING-SENSOR BYPASS FILTER, OIL | 1 | |
| 2C91354G01 | HOLDING FIXTURE-OIL FLTER BY PASS SENSOR | 5 | |
| 2C91354G02 | HOLDING FIXTURE - OIL FILTER BY− PASS SENSOR (RECOMMENDED) | 10 | |
| 350A93-3205-00 | MGB INPUT LOCK WRENCH- SHAFT HOLDING FIXTURE | 2 | |
| 350A93-3302-01 | T/R Hub Holding Fixture - Yoke Restraint | 1 | |
| 460006231 | HOLDING FIXTURE - MLG A320NEO | 7 | |
| 59512A0000-01 | FIXTURE-HOLDING | 1 | |
| 59549A0000-01 | FIXTURE-HOLDING | 1 | |
| 6796338 | HOLDING FIXTURE - PROP SHAFT | 1 | |
| 6796621 | FIXTURE - HOLDING, TURBINE COUPLING SHAFT | 2 | |
| 6796698 | FIXTURE -HOLDING, FUEL CONTROL | 2 | |
| 6797173 | HOLDING FIXTURE - TURB COUPLING SHAFT | 1 | |
| 6798783 | FIXTURE-HOLDING, INNER & INTERM. MEMBER | 1 | |
| 68506-050-1 | HOLDING FIXTURE - THOMSON-CSF | 1 | |
| 6872596 | FIXTURE - HOLDING, TURB AND EXHAUST COLL SUP ASSY | 1 | |
| 6872937 | FIXTURE----HOLDING, SERIES I AND II 1ST STAGE NOZZLE | 1 | |
| 6872938 | FIXTURE - HOLDING 2ND STAGE | 1 | |
| 6872940 | FIXTURE - HOLDING 4TH STAGE | 1 | |
| 6872941 | FIXTURE - HOLDING SERIES 2 4TH STAGE | 1 | |
| 6872943 | FIXTURE - HOLDING, SERIES 2 3RD STAGE | 1 | |
| 6872947 | FIXTURE - HOLDING 1ST STAGE | 1 | |
| 6872948 | FIXTURE----HOLDING, SERIES II 3RD STAGE NOZZLE SHOT PEENING | 1 | |
| 6872984 | FIXTURE - HOLDING, COMPRESSOR REAR | 1 | |
| 6897875 | FIXTURE-HOLDING, FUEL NOZZLE | 2 | |
| 7637987-17 | A53-142 Douglas DC-9 Probe Holding Fixture and alignment 2024-T3 Clad Aluminum. Figure 1, Sheet 4 | 1 | |
| 856A1035 | FIXTURE, HOLDING - NO. 3 BEARING IGB RETAINER NUT | 1 | |
| 856A1035G01 | Fixture Holding - No. 3 Brg IGB Retainer Nut (holding fixture) | 9 | |
| 856A1047G03 | FIXTURE, HOLDING - IGB MODULE | 3 | |
| 856A1092P01 | FIXTURE, HOLDING - HPT AFT OUTER SEAL (HOLDING FIXTURE) | 1 | |
| 856A1199 | HOLDING FIXTURE - HPCR/HPTR BOLTS | 1 | |
| 856A1199P01 | HOLDING FIXTURE - HPCR/HPTR BOLTS | 11 | |
| 856A1430 | FIXTURE, HOLDING - IGB MODULE (HOLDING FIXTURE) | 1 | |
| 856A1430G02 | Fixture, Holding - IGB Module (holding fixture) | 7 | |
| 856A1451P01 | FIXTURE, HOLDING - HP TURBINE AFT OUTER SEAL | 1 | |
| 856A1845G02 | FIXTURE, HOLDING - VANE SECTOR | 3 | |
| 856A1845G03 | FIXTURE, HOLDING - VANE SECTOR | 5 | |
| 856A2377G01 | FIXTURE, CENTERING AND HOLDING - ROTATING SEALS(CENTERING AND HOLDING FIXTURE) | 1 | |
| 856A2618 | FIXTURE- HOLDING/ROTOR/STATOR | 1 | |
| 856A2618 REV C | FIXTURE- HOLDING/ROTOR/STATOR | 1 | |
| 856A2618G01 | FIXTURE HOLDING-ROTOR | 5 | |
| 856A2618G02 | FIXTURE, HOLDING-ROTOR/STATOR | 2 | |
| 856A2618G03 | Fixture, Holding-Rotor/Stator | 3 | |
| 856A2618G04 | HOLDING FIXTURE - LPT ROTOR/STATOR | 11 | |
| 856A2660G11 | HOLDING FIXTURE - ROTOR/STATOR, LPT | 5 | |
| 856A2693G03 | HOLDING FIXTURE - N°4 BEARING INNER | 1 | |
| 856A2826G01 | FIXTURE, HOLDING - NO. 4 BEARING INNER RACE BOLTS (HOLDING FIXTURE) | 1 | |
| 856A2826G02 | HOLDING FIXTURE - N°4 BEARING INNER | 1 | |
| 856A2826G03 | HOLDING FIXTURE - N4 BEARING INNER | 2 | |
| 856A3287G02 | FIXTURE, HOLDING - FORWARD ROTATING AIR SEAL BOLT HEADS | 3 | |
| 856A3358 | FIXTURE, HOLDING - NO. 4 BEARING INNER RACE BOLTS | 1 | |
| 856A3358G03 | FIXTURE, HOLDING - NO. 4 BEARING INNER RACE BOLTS(HOLDING FIXTURE)OBSELETE REPLACED BY 856A3358G04 THEN 856A3358G05 | 2 | |
| 856A3358G04 | FIXTURE, HOLDING - NO. 4 BEARING INNER RACE BOLTS | 2 | |
| 856A3358G05 | Fixture, Holding - No. 4 Bearing Inner Race Bolts (holding fixture) | 4 | |
| 856A4706G01 | FIXTURE, HOLDING -FAN BLADE | 1 | |
| 856A4706G02 | FIXTURE, HOLDING -FAN BLADE | 1 | |
| 856A5556G01 | STAGE 1-4 LPT BLADE TWIST ANGLE CHECK (CONF.2 AND 3) (HOLDING FIXTURE) | 1 | |
| 856A5556G02 | FIXTURE HOLDING TWIST ANGLE CHECK LPT BLADES STAGE 1-4 | 3 | |
| 856A5657G01 | HOLDING FIXTURE - LPT NOZZLE STG 2 | 1 | |
| 856A5658G01 | HOLDING FIXTURE - LPT NOZZLE STG 3 | 1 | |
| 856A5659G01 | HOLDING FIXTURE - LPT NOZZLE STG 4 | 1 | |
| 856A5671G01 | HOLDING & GRINDING MATING FACE FIXTURE - LPT NOZZLE STG1 | 1 | |
| 856A5947G02 | FIXTURE, HOLDING -FAN BLADE | 1 | |
| 856А2618 | FIXTURE, HOLDING - ROTOR/STATOR, LPT | 1 | |
| 856А2618G04 | FIXTURE, HOLDING - ROTOR/STATOR, LPT | 1 | |
| 8C2175 | FIXTURE, HOLDING - STG 7 HPCS BOLT | 1 | |
| 8C3300 | FIXTURE, HOLDING - VBV DOOR | 1 | |
| 956A6436 | FIXTURE - HOLDING - LPT NOZZLE | 1 | |
| 956A6465 | FIXTURE - HOLDING - LPT CASE MISE AU ROND | 1 | |
| 956A8404 | FIXTURE - HOLDING RING - LPT CASE | 1 | |
| 956A8547 | FIXTURE - HOLDING - BRACKETS - OIL DRAIN | 1 | |
| 98V27309004000 | FIXTURE, HOLDING -ELEVATOR ACTUATORS | 4 | |
| 9R7257G06 | FIXTURE, HOLDING - ABRAIDABLE GRIND | 1 | |
| A11006 | HOLDING FIXTURE - NLG A320NEO | 3 | |
| A27119-1 | HOLDING FIXTURE EQUIPMENT - GEAR ASSEMBLY, LE SLAT DRIVE | 1 | |
| A27126-1 | HOLDING FIXTURE - INPUT ROD ASSEMBLY, ELEVATOR POWER CONTROL UNIT (PCU) | 3 | |
| A32058-1 | HOLDING FIXTURE - ACTUATOR LOCK, NOSE LANDING GEAR (NLG) | 1 | |
| A32084-1 | HOLDING FIXTURE - PISTON ROD, NOSE LANDING GEAR (NLG) LOCK ACTUATOR | 1 | |
| A32087-1 | FIXTURE - HOLDING, MAIN LANDING GEAR RETRACT ACTUA | 1 | |
| A32087-12 | FIXTURE - HOLDING, MAIN LANDING GEAR RETRACT ACTUATOR | 1 | |
| A54013-1 | HOLDING FIXTURE - DIAGONAL BRACE | 1 | |
| A78021-7 | HOLDING FIXTURE - PISTON (A78021-7 INCLUDED IN A78021-45 AND A78021-46) | 1 | |
| AF-SPO-6450/5719 | CUSTOM NORTEC SPO-6450 STYLE MANUAL BOLT HOLE PROBE 500KHz-2MHz with SPO-5719 STYLE HOLDING FIXTURE W/ 1/16" PER rEVOLUTION THREAD. | 1 | |
| AGE13255 | ADAPTER, ASSY., HOLDING FIXTURE-T50 AMAD | 1 | |
| AJ65B80482 | HOLDING FIXTURE - QUADRANT ASSEMBLY, ELEVATOR CONTROL | 1 | |
| ASI-18-9B | SMT-65()CAPSTANHOLDINGFIXTURE | 4 | |
| C27023-1 | HOLDING FIXTURE - LEADING EDGE SLAT ACTUATOR | 1 | |
| C32008-1 | HOLDING FIXTURE - MLG DAMPER | 3 | |
| C32027-1 | Holding Fixture Equipment - Functional Test, Landing Gear Control Lever | 2 | |
| C32027-2 | Holding Fixture Equipment - Functional Test, Landing Gear Control Lever | 2 | |
| C32027-3 | Holding Fixture Equipment - Functional Test, Landing Gear Control Lever | 3 | |
| C32037 | HOLDING FIXTURE-MAIN LANDING GEAR | 1 | |
| C32037-1 | Holding Fixture - Main Landing Gear | 10 | |
| C32037-46 | HOLDING FIXTURE - MAIN LANDING GEAR | 1 | |
| C32045-23 | Holding Fixture - Seal Change, Main Landing Gear | 5 | |
| C32045-63 | HOLDING FIXTURE - SEAL CHANGE, MAIN LANDING GEAR | 4 | |
| C32046-1 | Holding Fixture Equipment - Shimmy Damper Assembly, Main Landing Gear | 10 | |
| C32046-25 | HOLDING FIXTURE EQUIPMENT - SHIMMY DAMPER ASSEMBLY, MAIN LANDING GEAR | 3 | |
| C32063-1 | HOLDING FIXTURE - SEAL CHANGE, MAIN LANDING GEAR | 1 | |
| C52001-1 | Holding Fixture - Compressed Spring Cartridge | 4 | |
| C52004 | HOLDING FIXTURE - COMPRESSED SPRING CARTRIDGE | 1 | |
| C52004-1 | HOLDING FIXTURE - COMPRESSED SPRING CARTRIDGE | 11 | |
| C57006-1 | Holding Fixture - Winglet | 7 | |
| CJMDS32-002 | FIXTURE -OLEO HOLDING | 1 | |
| DAH601979 | FIXTURE-SETTING AND HOLDING | 1 | |
| DAH602255 | FIXTURE-HOLDING | 1 | |
| DAH602256 | FIXTURE-HOLDING | 1 | |
| DAH602337 | FIXTURE-HOLDING | 1 | |
| DAH602339 | FIXTURE-HOLDING | 1 | |
| DBS-CG1-F | Holding Fixture for DBS-CG1 | 1 | |
| Ex-92646 | Fixture-holding, rear carrier | 1 | |
| Ex-92647 | Fixture-holding, nose bearing plate | 1 | |
| Ex-97184 | Fixture-holding, nose bearing plate | 1 | |
| Ex-98304 | Fixture-holding, diffuser scroll | 1 | |
| F70320-1 | Holding Fixture - Control Column | 10 | |
| F70320-1-M | HOLDING FIXTURE-CONTROL COLUMN | 1 | |
| F70320-15 | SHAFT - HOLDING FIXTURE, CONTROL COLUMN (SHAFT F70320-15 IS PART OF BASE F70320-2 INCLUDED KIT F70320-1) | 1 | |
| F72804 | HOLDING FIXTURE -0 FLAP TRANSMISSION USED TO | 1 | |
| F80-0-2792 | Holding Fixture-Piston,L.E.Slat Actuator | 1 | |
| F80-0-2792PM | HOLDING FIXTURE-PISTON,L.E.SLAT ACTUATOR | 1 | |
| F80-0-5955 | POW-R-ARM HOLDING FIXTURE | 1 | |
| F80088-1 | HOLDING FIXTURE - UPPER ORIFICE SUPPORT TUBE, NOSE GEAR | 1 | |
| F80088-1 -3 | Holding Fixture -Upper Orifice Support Tube. Nose Gear | 1 | |
| F80088-3 | HOLDING FIXTURE - UPPER ORIFICE SUPPORT TUBE, NOSE GEAR | 2 | |
| F80096-1 | HOLDING FIXTURE - FORWARD TRUNNION BEARING HOUSING, MAIN GEAR | 2 | |
| F80096-1 -4 -7 | Holding Fixture -Forward Trunnion Bearing Housing. Main Gear | 1 | |
| F80096-4 | HOLDING FIXTURE- FWD TRUNNION | 10 | |
| F80096-7 | HOLDING FIXTURE ASSY-MLG FWD TRUNNION BEARING | 6 | |
| F80189-1 | HOLDING FIXTURE - BRAKE VALVE | 1 | |
| F80263-1 | Holding Fixture -Piston. Leading Edge Slat Actuator | 4 | |
| FME65-73761 | HOLDING FIXTURE -0 MAIN LANDING GEAR | 5 | |
| FME65-73761-1 | HOLDING FIXTURE -0 MLG | 1 | |
| GS10456-1 | FIXTURE - HOLDING MOTOR | 1 | |
| HS-7572 | FIXTURE - BLADE HOLDING | 1 | |
| HS-8170 | ARBOR - HOLDING FIXTURE, BLADE | 1 | |
| HS8007 | FIXTURE - VALVE HOUSING HOLDING | 1 | |
| HS9380 | ARBOR - BLADE HOLDING FIXTURE | 1 | |
| HS9381 | ARBOR - BLADE HOLDING FIXTURE | 1 | |
| HS9704 | FIXTURE - LIMITING LINKAGE HOLDING | 1 | |
| HS9757 | ARBOR - BLADE HOLDING FIXTURE | 1 | |
| HS9808 | FIXTURE - CONTROL HOLDING | 1 | |
| IAE1P16271 | FIXTURE-HOLDING | 5 | |
| IAE3R19167 | FIXTURE - HOLDING - FRONT STAGE 9-12 DIS | 1 | |
| IAE3R19168 | FIXTURE - HOLDING - REAR STAGE 9-12 DISC | 1 | |
| IAE3R19200 | FIXTURE - HOLDING - REAR STAGE 9-12 DISC | 1 | |
| J27080-1 | HOLDING FIXTURE - TE FLAP, ANGLE GEARBOX | 1 | |
| J32062-26 | TRANSPORTATION EQUIPMENT - TOWER JACK OR HOLDING FIXTURE, MLG | 7 | |
| LTCT115 | HOLDING FIXTURE - NUT REMOVAL | 1 | |
| LTCT13344-01 | FIXTURE, HOLDING-NUT TO SHAFT | 2 | |
| LTCT2075 | HOLDING FIXTURE - SUN GEAR | 1 | |
| LTCT3024-B | NOF-FIXTURE HOLDING LTCT | 1 | |
| LTCT7157x | Plate, Holding - Torque Fixture | 1 | |
| MBEU57834 | HOLDING FIXTURE-FIRING UNITS | 1 | |
| MHS33654 | FIXTURE,HOLDING- FOR RAM AIR TURBINE 730816 | 1 | |
| PWA25443 | FIXTURE-#1 BRG HOUSING HOLDING_[PWA25443] | 2 | |
| PWA28264 | FIXTURE, HOLDING - 1ST STG TURB VANE_[PWA28264] | 1 | |
| PWA81311 | FIXTURE - HOLDING, LOWER TOWERSHAFT AND OIL DUCT - PW2000 ENGINES | 1 | |
| PWC30057 | holding fixture - Pratt & Whitney Canada | 3 | |
| PWC30059 | holding fixture - Pratt & Whitney Canada | 4 | |
| PWC30131 | FIXTURE-HOLDING | 3 | |
| PWC30252 | holding fixture - Pratt & Whitney Canada | 2 | |
| PWC30491 | FIXTURE-HOLDING | 2 | |
| PWC30560 | holding fixture - Pratt & Whitney Canada | 1 | |
| PWC30732 | holding fixture - Pratt & Whitney Canada | 4 | |
| PWC32226 | FIXTURE-HOLDING | 3 | |
| PWC33260 | HOLDING FIXTURE - PRATT & WHITNEY CANADA | 4 | |
| PWC34045 | FIXTURE-HOLDING | 2 | |
| PWC34045-1 | FIXTURE-HOLDING | 1 | |
| PWC34530 | holding fixture - Pratt & Whitney Canada | 3 | |
| PWC34597 | Holding fixture - Pratt & Whitney Canada | 4 | |
| PWC34598 | Holding fixture - Pratt & Whitney Canada | 3 | |
| PWC34599 | Holding fixture - Pratt & Whitney Canada | 3 | |
| PWC34913 | FIXTURE HOLDING BORESC - Pratt & Whitney Canada | 14 | |
| PWC37388 | holding fixture - Pratt & Whitney Canada | 2 | |
| PWC37834 | holding fixture - Pratt & Whitney Canada | 3 | |
| PWC38101 | holding fixture - Pratt & Whitney Canada | 2 | |
| PWC41393 | FIXTURE-HOLDING, BORESCOPE | 1 | |
| PWC50048 | FIXTURE-HOLDING | 1 | |
| PWC50258 | holding fixture - Pratt & Whitney Canada | 3 | |
| PWC50630 | FIXTURE-HOLDING | 1 | |
| PWC51072 | holding fixture - Pratt & Whitney Canada | 2 | |
| PWC51131 | holding fixture - Pratt & Whitney Canada | 3 | |
| PWC51225 | FIXTURE-HOLDING | 1 | |
| PWC54783 | FIXTURE-HOLDING | 1 | |
| PWC54788 | FIXTURE-HOLDING | 1 | |
| PWC56344 | SUPPORT PINION GEAR/HOLDING FIXTURE - PR | 1 | |
| PWC56346 | HOLDING FIXTURE - PR | 1 | |
| PWC60613 | FIXTURE-HOLDING GEARSHAFT | 1 | |
| PWC71016 | HOLDING FIXTURE -BEARING | 1 | |
| PWC72107 | Holding fixture - Pratt & Whitney Canada | 3 | |
| PWC77028 | HOLDING FIXTURE-B37 | 1 | |
| RB23033031 | Fixture-Holding Front Bearing Housing | 2 | |
| SPL-5428 | Holding Fixture-Piston,L.E.Slat Actuator | 1 | |
| SPL-5440 | Holding Fixture-Piston,L.E.Slat Actuator | 1 | |
| SPL-9359 | Fixture - Holding, MLG Actuator | 1 | |
| SPL-9361 | Fixture - Holding, MLG Actuator | 1 | |
| ST879AF | Holding Fixture - Hand Presetting Tools, ST879A | 7 | |
| ST879AF-1 | HOLDING FIXTURE - HAND PRESETTING TOOLS, ST879A | 4 | |
| ST879AF-ML | HOLDING FIXTURE-HAND | 1 | |
| STD67673 | Fixture-Holding | 1 | |
| T-304270 | Fixture-Holding | 1 | |
| T-429970 | Fixture-Holding | 1 | |
| T-429970PM | FIXTURE-HOLDING | 1 | |
| T-436877 | FIXTURE-HOLDING LAP | 1 | |
| T-449854 | Holding Fixture-Yoke | 1 | |
| T103063 | TOOL SET- HOLDING FIXTURE, ENGINE ADAPT | 1 | |
| T119200 | FIXTURE-CDU HOLDING | 1 | |
| T8741 | FIXTURE-STABLE ELEVENT HOLDING | 1 | |
| TB3038G001 | I.G.V BLADE HOLDING FIXTURE - APU500 - Pratt & Whitney Aeropower / Pratt & Whitney Canada | 1 | |
| TE65B80308 | FIXTURE - HOLDING, CONTROL COLUMN | 1 | |
| TSJ5-87879-1 | Holding Fixture - Control Column | 1 | |
| TSJ50-3309-2 | LEVER ASSY -0 HOLDING FIXTURE | 1 | |
| lC600l | FIXTURE, HOLDING- LOW PRESSURE TURBINE ROTOR FORWA | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
