| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 1C6208 | FIXTURE SET | 1 | |
| 1C6208G01 | FIXTURE SET | 1 | |
| 1C8182 | FIXTURE SET | 2 | |
| 1C8182G01 | FIXTURE SET | 1 | |
| 21C895G003 | FIXTURE SET | 1 | |
| 2C14138G01 | FIXTURE SET | 11 | |
| 2C14866 | FIXTURE SET | 1 | |
| 2C6178 | FIXTURE SET | 1 | |
| 2C6178G11 | FIXTURE SET | 1 | |
| 2C6259 | FIXTURE SET | 1 | |
| 2C6259G05 | FIXTURE SET | 1 | |
| 2C7224G03 | FIXTURE SET | 1 | |
| 2C8041G06 | FIXTURE SET | 1 | |
| 856A1055G01 | FIXTURE SET | 1 | |
| 98V2730900A000 | FIXTURE SET | 1 | |
| F80180-1 | FIXTURE SET | 1 | |
| PWA57617 | FIXTURE SET | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) IAE1J12514 | Setting Fixture (CALIBRATION) (CALIBRATION) | 1 | |
| 011-01085-01 | GSM 85 SLIP-CLUTCH SET FIXTURE | 1 | |
| 0S21976 | FIXTURE-SETTING | 1 | |
| 0S22309A | SETTING FIXTURE | 1 | |
| 0T900-0239 | TRACK SETTING FIXTURE | 1 | |
| 0T900-0247 | SEAT TRACK SETTING FIXTURE ASSEMBLY | 5 | |
| 0T900-0309 | SETTING FIXTURE | 1 | |
| 0T900-0311 | TRACK SETTING FIXTURE | 1 | |
| 0T900-0927 | TRACK SETTING FIXTURE | 2 | |
| 0T900-5155 | HORIZONTAL ACTUATOR SETTING FIXTURE | 1 | |
| 0T9000247 | FIXTURE TRACK SETTING | 5 | |
| 11C3921 | TOOL SET - SHIPPING FIXTURE IGB | 1 | |
| 11C4376 | FIXTURE, BRACKET SET, FAN HUB FRAME | 1 | |
| 170-62060-80 2-38H 1 | FIXTURE NEUTRAL SETTING RH ELEVATOR | 8 | |
| 170-62060-801-38H1 | NEUTRAL SETTING FIXTURE, LEFT-HAND, ELEVATOR | 8 | |
| 170-62060-801-38H1 | FIXTURE, NEUTRAL SETT. LH ELEV | 8 | |
| 170-62060-802-38H1 | NEUTRAL SETTING FIXTURE, RIGHT-HAND, ELEVATOR | 8 | |
| 170-6206080138H1 | NEUTRAL SETTING FIXTURE,LEFT-HAND,ELEVATOR | 8 | |
| 170-6206080238H1 | NEUTRAL SETTING FIXTURE,RIGHT-HAND,ELEVATOR | 8 | |
| 18901810000 | SYNCHROTEL NULL SETTING FIXTURE | 1 | |
| 1A258-0505 | ACTUATOR SETTING FIXTURE | 1 | |
| 1C6147 | FIXTURE SET, REPAIR - PT ROTOR BLADES | 1 | |
| 1C6172 | FIXTURE; RAIL SETS | 1 | |
| 1C6193 | FIXTURE SET, MACHINING - FRONT COMPRESSOR STATOR | 1 | |
| 1C6193 REV B | FIXTURE SET, MACHINING - FRONT COMPRESSOR STATOR | 1 | |
| 1C6274 | FIXTURE SET, INSPECTION - LPT STATOR SEAL, STG. 2 | 1 | |
| 1C6274 REV B | FIXTURE SET, INSPECTION - LPT STATOR SEAL, STG. 2 | 1 | |
| 1C6279 | FIXTURE SET, INSP LPT STATOR SEAL STG 4 TF39 ENG | 1 | |
| 1C6279 REV B | FIXTURE SET, INSP. LPT STATOR SEAL, STAGE 4 TF39 ENG. | 1 | |
| 1C6280 | FIXTURE SET, INSPECT - PT STATIONARY SEALS, STAGE 3 | 1 | |
| 1C6281 | FIXTURE SET, INSPECT - PT STATIONARY SEALS, STAGE 5 | 1 | |
| 1C6282 | FIXTURE SET, INSPECT - PT STATIONARY SEALS, STAGE 6 | 1 | |
| 1C6284 | FIXTURE SET, REPAIR - PT INTERSTAGE SEAL, STAGES 2-6 | 1 | |
| 1C6923 | FIXTURE SET, MASKING - PT ROTOR SHAFT | 1 | |
| 1C8182 | FIXTURE SET - REMOVAL MATING SEAL | 2 | |
| 1C8182 REV B | FIXTURE SET - REMOVAL MATING SEAL | 1 | |
| 1C8182G01 | Fixture set, Mating Seal Removal | 1 | |
| 1C8210 | FIXTURE, SETTING - ACTUATION SYSTEM | 1 | |
| 1C8210G01 | FIXTURE, SETTING- ACTUATION SYSTEM | 1 | |
| 1C8343 | FIXTURE SET, TOP HALVING- HP COMPR STATOR CASE | 1 | |
| 1C8343G01 | Fixture Set, Top Halving - HP Compressor Stator Case | 1 | |
| 1C8400 | FIXTURE, SETTING-ACTUATOR, VARIABLE STATOR VANE/IG | 1 | |
| 1C8400G01 | FIXTURE, SETTING-ACTUATOR, VSV/IGV | 1 | |
| 1C8400G02 | Fixture, Setting - Actuator, Variable Stator Vane/IGV | 1 | |
| 1C9400 | FIXTURE SET, RAISE & HINGE- UPPER COMPR CASE | 1 | |
| 1C9400G01 | Fixture set raise and hinge upper compressor case | 1 | |
| 1C9403 | FIXTURE, SETTING- ACTUATOR, VARIABLE STATOR VANE/I | 1 | |
| 1C9403G01 | FIXTURE, SETTING-ACTUATOR, VSV/IGV | 1 | |
| 1C9408G02 | FIXTURE, SET, VSV TORQUE MEASURING | 1 | |
| 1J12444 | Fixture, Setting | 1 | |
| 1J12513 | Setting Fixture | 1 | |
| 1J12584 | Fixture, Setting | 1 | |
| 1T900-0107 | SETTING FIXTURE | 2 | |
| 1T900-5155 | HORIZONTAL ACTUATOR SETTING FIXTURE | 1 | |
| 2024593-1 | LEAKAGE TEST FIXTURE SET | 1 | |
| 2189005F1 | Assembly And Stroke Set Fixture | 1 | |
| 21C7090G02 | SET, COMPRESSOR STATOR MEASUREMENT FIXTURES (CONSISTING OF) | 1 | |
| 21C7092G02 | SET, COMPRESSOR STATOR LANDS/VANES GRINDING FIXTURES (CONSITING OF) | 1 | |
| 21C7098G02 | COMPRESSOR ROTOR MEASUREMENT FIXTURES SET | 1 | |
| 21C7863P01 | TAB INSPECTION AND SETTING FIXTURE, PT SHAFT | 1 | |
| 21C8104G01 | FIXTURE FAN VARIABLE GEOMETRY SETTING | 1 | |
| 2550105 | Fixture, setting, operating lever | 2 | |
| 2550134 | Fixture, preset, operating lever | 2 | |
| 2550145 | Fixture, preset, governor spring | 2 | |
| 2561520 | Fixture, setting, hat valve | 2 | |
| 2585780 | END PLAY SETTING FIXTURE | 1 | |
| 23054848 | Fixture – Grinding, Offset Gas Generator Blade track Grinding | 1 | |
| 27010-046-000 | SET OF TIE LOADS FOR TEXT FIXTURE | 1 | |
| 27010-048-000 | SET OF TIE LOADS FOR TEXT FIXTURE | 1 | |
| 289520-1 | RIVET SET PNEUMATIC FIXTURE | 1 | |
| 293778-1 | FIXTURE-SETTING | 1 | |
| 294813-1 | RIVET SET FIXTURE | 1 | |
| 296324-1 | Pneumatic Drive Rivet Set Fixture | 1 | |
| 2C14138G01 | FIXTURE SET, REMOVAL | 11 | |
| 2C14668 | FIXTURE SET, I/R LPT NOZ STG1 | 1 | |
| 2C14668G01 | FIXTURE SET INST & REM LPT STG 1 NOZZLE | 3 | |
| 2C14668G01TK | FIXTURE SET, INSTALLATION AND REMOVAL LPT NOZZLES STAGE 1 | 1 | |
| 2C14668G02 | FIXTURE SET, INSTALLATION AND REMOVAL - LPT NOZZLES STAGE 1 | 1 | |
| 2C6178 | FIXTURE SET, POSITION VSV | 1 | |
| 2C61789G02 | FIXTURE SET, VSV TIP | 1 | |
| 2C6178G01 | FIXTURE SET, POSITION VSV | 1 | |
| 2C6178G11 | FIXTURE SET, POSITION - VSV | 1 | |
| 2C6178G13 | FIXTURE SET, POSITION - VSV | 1 | |
| 2C6259 | FIXTURE, SET SECURE-VARIABLE STATR ARMS, STG 3 - 6 | 1 | |
| 2C6259 REV P | FIXTURE, SET SECURE-VARIABLE STATOR ARMS, STG. 3 - 6 | 1 | |
| 2C6259G01 | FIXTURE SET, SECURE-VARIABLE | 1 | |
| 2C6259G04 | FIXTURE SET, SECURE - VSV ARMS | 1 | |
| 2C6259G05 | FIXTURE SET - SECURE | 1 | |
| 2C6536 | FIXTURE SET, PLASMA SPRAY | 1 | |
| 2C6536G01 | FIXTURE SET, PLASMA SPRAY | 1 | |
| 2C6537 | FIXTURE SET, MACHINING-C/R S | 1 | |
| 2C6537G01 | FIXTURE SET, MACHINING-C/R S | 1 | |
| 2C6538 | FIXTURE SET, MACHINING-C/R | 1 | |
| 2C6538G01 | FIXTURE SET, MACHINING-C/R | 1 | |
| 2C6539 | FIXTURE SET, MACHINING - C/R | 1 | |
| 2C6539G01 | FIXTURE SET, MACHINING - C/R | 1 | |
| 2C6543 | FIXTURE SET, PLASMA SPRAY | 1 | |
| 2C6543G01 | FIXTURE SET, PLASMA SPRAY | 1 | |
| 2C6544 | FIXTURE SET, MACHINING | 1 | |
| 2C6544G01 | FIXTURE SET, MACHINING | 1 | |
| 2C6546 | FIXTURE SET, MACHINING | 1 | |
| 2C6546G01 | FIXTURE SET, MACHINING | 1 | |
| 2C6628 | SET MASTER, FIXTURE | 1 | |
| 2C6661G01 | FIXTURE,SET-GRIND HPC PLATFORM BLDS | 1 | |
| 2C6998G05 | FIXTURE SET REMOVAL MATING SEAL RINGS-ACCESORY GEARBOX | 2 | |
| 2C6998G06 | FIXTURE SET REM/ PIN | 3 | |
| 2C7180 | FIXTURE SET,SHOT PEEN-ENGINE C | 1 | |
| 2C7180G01 | FIXTURE SET,SHOT PEEN-ENGINE C | 1 | |
| 2C7284 | FIXTURE SET, POSITIONING - CRF | 1 | |
| 2C7284G01 | FIXTURE SET, POSITIONING - CRF | 1 | |
| 2C7406 | FIXTURE SET,HEAT TREAT AND WEL | 1 | |
| 2C7406G01 | FIXTURE SET,HEAT TREAT AND WEL | 1 | |
| 2C7787G01 | FIXTURE SET, HEAT | 1 | |
| 2C81189 | SET, FIXTURE | 1 | |
| 2C81189G01 | SET, FIXTURE, RESTRAINING | 1 | |
| 2C81191G01 | FIXTURE, VANE SETTING | 1 | |
| 2C81221 | FIXTURE, SETTING VG TURNBUCKL | 1 | |
| 2C81221G01 | FIXTURE, SETTING VG TURNBUCKL | 1 | |
| 2C81221G02 | FIXTURE, SETTING | 1 | |
| 2C81243G01 | FIXTURE, TURNBUCKLE SET | 1 | |
| 2C91333G01 | FIXTURE - SET VG | 1 | |
| 30R0004G01 | FIXTURE,DRILL, SET SCREW HPC | 1 | |
| 30R0004G02 | FIXTURE, DRILL - SET SCREW, F414 HPC ROTOR, STAGE 4 -7 | 1 | |
| 32409 | FIXTURE SETTING | 1 | |
| 354153-TCR-1 | FIXTURE SET,AIRCRAFT MAINTENANCE | 1 | |
| 3T900-0579 | FIXTURE HEIGHTLOCK PLATE SETTING | 1 | |
| 460005887PM | SETTING FIXTURE | 1 | |
| 6796291 | Setting Fixture | 1 | |
| 6796458 | Setting Fixture | 1 | |
| 6796609 | GAGE ,SETTING,COMPRESSOR CASE BORING FIXTURE | 1 | |
| 6796774 | FIXTURE -SETTING, FUEL CUTOFF ROD ASSEMBLY | 2 | |
| 6797197 | SETTING FIXTURE - FUEL CONTROL | 1 | |
| 6797530 | Fixture-Setting | 1 | |
| 6872482 | FIXTURE - SETTING | 1 | |
| 6877024 | TACK WELD FIXTURE, PRIMARY AND SECONDARY HOLDS SUPPORT AND METERING SET BODY COMPONENTS IN POSITION DURING TACK WELD OPERATIONS. | 1 | |
| 6897103 | HOLDING FIXTURE, TIP SEAL HOLDS METERING SET SEAL FIXTURES ON FUEL NOZZLE FOR PRESSURE TESTING. | 1 | |
| 63040014 | Cycling and set-up fixture | 1 | |
| 460002873 | SETTING FIXTURE | 1 | |
| 460005205 | SETTING FIXTURE | 1 | |
| 460005845 | SETTING AND HOLDING FIXTURE | 1 | |
| 460005887 | SETTING FIXTURE | 1 | |
| 460006457 | SETTING FIXTURE | 1 | |
| 460006502 | SETTING FIXTURE | 1 | |
| 460006581 | SETTING FIXTURE | 1 | |
| 460006958 | SETTING FIXTURE | 1 | |
| 460007086 | SETTING FIXTURE | 1 | |
| 460007130 | TARGET SETTING FIXTURE | 1 | |
| 470-24990J | SETTING FIXTURE | 1 | |
| 4F60160 | Holding Fixture, Fluid Flow Test Setup (2IT) | 1 | |
| 52434A0000-01 | TEST FIXTURE SET | 1 | |
| 558-1-30120 | FIXTURE-TORQUE, SETTING | 1 | |
| 558-1-30123 | FIXTURE-SETTING | 1 | |
| 5916784-1 | CHECK FIXTURE TEST SET 0.0005"READIN | 4 | |
| 5965877-501 | ALIGN FIXTURE-SET TRACK | 7 | |
| 68932-097-1 | FIXTURE-SETTING | 1 | |
| 74194TF3-101 | FIRST STAGE SETUP FIXTURE | 1 | |
| 74194TF3-102 | FIRST STAGE SETUP FIXTURE | 1 | |
| 80005-897 | FIXTURE SET AIRCRAFT MAINTENANCE | 1 | |
| 82640AF1 | PRE-SET FIXTURE | 1 | |
| 833202-1 | SET FIXTURE BEARING PRESSING | 1 | |
| 833433-1 | Pneumatic Drive Rivet Set Fixture | 1 | |
| 835064-1 | Rod End Set Fixture | 1 | |
| 856A1055G01 | FIXTURE SET GRIND SPACER C/S STAGE 4-9 LINERS | 1 | |
| 856A1141G03 | Fixture Set Insp. | 1 | |
| 856A1141G04 | Fixture Set Radiograph | 1 | |
| 856A1141G06 | Fixture Set Radiograph | 1 | |
| 856A1342 | VSV PRESET FIXTURE | 1 | |
| 856A1344 | FIXTURE-SET UP CORE | 1 | |
| 856A1344G01 | Fixture Set-up Core/HCPR | 1 | |
| 856A1344G02 | Fixture Set Up Core/HPCR | 7 | |
| 856A1344G02 | FIXTURE,SETUP-CORE HPC ROTOR BUILDUP | 7 | |
| 856A3731G03 | FIXTURE HANDLING - FAN DISK (SET) | 6 | |
| 856A4234G03 | FIXTURE SET, MACHINING HPT ROTOR SHAFT - FRONT | 1 | |
| 856A5678G01 | Tool Set holding Fixture | 1 | |
| 856A5679G01 | Tool Set holding Fixture | 1 | |
| 882640AF1 | LEVEL INDICATOR PRE-SET FIXTURE | 1 | |
| 8C2587 | TOOL SET, LIFTING FIXTURE - ACCESSORY GEARBOX | 1 | |
| 916482-1-1 | LEAKAGE FIXTURE SET | 1 | |
| 9446M61G02 | FIXTURE, LIFT - COMPRESSOR STATOR CASE, UPPER, SET | 1 | |
| 956A1323 | FIXTURE - SETMASTER/TEST - DROP CHECK TOOL | 1 | |
| 956A1701 | SET - FIXTURE LIFT - HPCR | 1 | |
| 956A3701 | SET - FIXTURE LIFT | 1 | |
| 956A8126 | FIXTURE - SETTING - VARIABLE BLEED VALVE | 1 | |
| 956A8331 | FIXTURE - SETTLING - SHAFT - LP TURBINE ASSEMBLY | 1 | |
| 956A8475 | FIXTURE - SETTING BEAM | 1 | |
| 956A8516 | FIXTURE - SETTING - LPT DISK 1 | 1 | |
| 956A8665 | FIXTURE - SETTLING - REAR CENTER VENTILATION TUBE | 1 | |
| 964C719-1 | AIR INSET ASSEMBLY FIXTURE | 1 | |
| 964C720-1 | AIR INSET ASSEMBLY FIXTURE | 1 | |
| 98A27903000000 | FIXTURE-SETTING MICROSWITCH UNIT | 1 | |
| 98A27903000001 | FIXTURE-SETTING MICROSWITCH UNIT | 1 | |
| 98A33403502000 | SETTING,FIXTURE-LANDING AND TAXIING LIGHTS | 7 | |
| 98A71103508000 | SETTING CLOSURE FIXTURE-PWA THRUST REVER COWL DOORS | 2 | |
| 98A76103002000 | SETTING-MICROSWITCH UNIT FIXTURE | 1 | |
| 9C1197 | FIXTURE SET - GUIDE - COMPRESSO | 1 | |
| 9C1882 | TOOL SET/LIFTING FIXTURE | 1 | |
| 9C1888 | TOOL SET/LIFTING FIXTURE | 1 | |
| 9C1903 | TOOL SET/ LIFTING FIXTURE | 1 | |
| 9C2396 | SETTING FIXTURE VSV ACTUATOR SUPPORT | 1 | |
| A20001-152 | FIXTURE SET,AIRCRAFT MAINTENANCE | 14 | |
| A20001-185 | FIXTURE SET,AIRCRAFT MAINTENANCE | 9 | |
| A685208 | LENGTH SETTING FIXTURE | 1 | |
| AD-280245 | Hot Upset Fixture | 1 | |
| AD-280258 | Hot Upset Fixture | 1 | |
| AD-280284 | Hot Upset Fixture | 1 | |
| AD-280298 | Hot Upset Fixture | 1 | |
| AD-280306 | Hot Upset Fixture | 1 | |
| AD-280317 | Hot Upset Fixture | 1 | |
| AGE-01410-401 | FIXTURE SET, BACKLASH MEASUREMENT | 8 | |
| AGE10809 | SETTING FIXTURE | 1 | |
| AGE18809 | STROKE SETTING FIXTURE | 1 | |
| AR024A001 | FIXTURE-SPRING LOAD SETTING | 1 | |
| AR024X006 | FIXTURE-TORQUE SWITCH SETTING | 1 | |
| AR024X007 | FIXTURE-SWITCH SETTING | 1 | |
| AT-00228 | TRIUMPH LENGTH SETTING FIXTURE | 1 | |
| AT201 1 -0-1 | ACTUATOR PRE-SETTING AND TORQUE TEST FIXTURE, | 1 | |
| AT2011-0-1 | PRE SETTING AND TORQUE TEST FIXTURE | 1 | |
| AT5284 | FIXTURE SWITCH SETTING | 1 | |
| C0M1644 | FIXTURE - TRACK SETTING | 1 | |
| CF1126 | FIXTURE, SETTING | 2 | |
| DAH601979 | FIXTURE-SETTING AND HOLDING | 1 | |
| DRT 65702 | DRT 65702 SETTING FIXTURE | 1 | |
| DRT65702 | Setting Fixture | 1 | |
| DRT65702PM | DRT 65702 SETTING FIXTURE | 1 | |
| F-1487 | Fixture, Block Pin Setter | 1 | |
| F-1704 | Fixture, Ball Setter | 1 | |
| F27209 | BENCH SETTING FIXTURE | 1 | |
| F2MA927522 | SET OF BACKLASH MEASURING FIXTURES | 1 | |
| F532-R1060-000W2300-01 | SET OF DRILLING FIXTURES FOR FRAME SHELL MDCD-HIN | 1 | |
| F72947 | TEST FIXTURE SET -0 POWER CONTROL UNIT, FLIGHT | 1 | |
| F72947-163 | TEST FIXTURE SET | 1 | |
| F80180-1 | Fixture Set -Compass Swinging | 1 | |
| F80224-50 | TEST FIXTURE SET EQUIPMENT | 1 | |
| FBS35293 | FIXTURE PRESET FOR EJECTION JACK AY 730820 | 1 | |
| FBS35821 | SETTING FIXTURE | 1 | |
| FDS35293 | PRESET FIXTURE | 1 | |
| FS0025 | SET JIG VALVE FIXTURE | 1 | |
| G34002-7 | SET FIXTURE | 1 | |
| G685208 | LENGTH SETTING FIXTURE | 1 | |
| G685208PM | LENGTH SETTING FIXTURE | 1 | |
| GS13405-1 | TV WINDOW SETTING FIXTURE | 1 | |
| GS13569 | FIXTURE RESET LEVER | 1 | |
| GS14147-1 | Heat Set Fixture | 2 | |
| GS14242-1 | SETTING FIXTURE | 1 | |
| GS14247-1 | SWITCH, SETTING FIXTURE | 1 | |
| GS14670-1 | SW SETTING FIXTURE | 1 | |
| GS15428-1 | HEAT SETTING FIXTURE | 1 | |
| GS15429-1 | FIXTURE HEAT SETTINGS | 1 | |
| GS15859-1 | FIXTURE LEAKAGE VALVE SET | 1 | |
| GS15860-1 | FIXTURE LEAKAGE VALVE SET | 1 | |
| GS19621-1 | Heat Set Fixture | 2 | |
| GS19623-1 | Heat Set and Bond Fixture | 2 | |
| GS19712-1 | FIXTURE, SUPPORT RESET HOUSING | 1 | |
| GS21248-1 | FIXTURE ASSY, STOP PLATE SETTING | 1 | |
| GS21586-1 | NOZZLE SETTING FIXTURE | 2 | |
| GS21911-1 | Heat Set and Bond Fixture | 2 | |
| GS21912-1 | Heat Set Fixture | 2 | |
| GS21913-1 | Heat Set and Bond Fixture | 2 | |
| GS21970-1 | NOZZLE SETTING FIXTURE | 2 | |
| GS23478-1 | SWITCH SETTING FIXTURE | 1 | |
| GS25308-1 | HEAT SET FIXTURE | 1 | |
| HC131H0069-000 | FIXTURE SETTING STALL VANE | 1 | |
| HC131H0069-002 | Fixture, Setting Stall Vane | 6 | |
| HH-101777 | Hot Upset Fixture | 1 | |
| HH-102110 | Hot Upset Fixture | 1 | |
| HLPTNK1101301-501 | CONFORMAL FUEL TANK TRANSPORTATION/STORAGE FIXTURE SET | 1 | |
| HS7619 | PITCH LOCK RESET SOLENOID FIXTURE | 1 | |
| HS9925 | Fixture Bellows Setting | 1 | |
| HTE20244A | SETTING FIXTURE | 1 | |
| HU20328 | SETTING FIXTURE | 1 | |
| IAE1J12362 | V2500 Internal Gearbox Fixture (EXT LEG SET ONLY) | 1 | |
| IAE1J12444 | FIXTURE SETTING | 1 | |
| IAE1J12511 | FIXTURE-SETTING | 8 | |
| IAE1J12514 | FIXTURE-SETTING | 2 | |
| IAE1J12539 | FIXTURE-SETTING | 2 | |
| IAE1J12623 | FIXTURE-SETTING | 1 | |
| J21848 | SETTING FIXTURE | 1 | |
| J32091-4 | TEST EQPT - SENSOR FIXTURE KIT FOR B32039 STAND (WORKS WITH OPTIONAL J32091-7 MACRO SET) J32091-4 | 1 | |
| J32091-5 | TEST EQPT - SENSOR FIXTURE KIT FOR G32009 STAND (WORKS WITH OPTIONAL J32091-9 MACRO SET) | 1 | |
| K55006-125 | TORQUE TOOL REACTION FIXTURE EQPT - CLAMP SET | 8 | |
| K55006-73 | FIXTURE PLATE SET | 9 | |
| K55006-74 | TORQUE TOOL REACTION FIXTURE EQPT - CLAMP SET | 5 | |
| K55006-75 | TORQUE TOOL REACTION FIXTURE EQPT - CLAMP SET | 9 | |
| L-545 | FIXTURE SUPPORT HPC SPLIT STATOR CASE AND AIRSEAL SET BUILD AND TURN | 1 | |
| L-545149 | FIXTURE SUPPORT HPC SPLIT STATOR CASE AND AIRSEAL SET BUILD AND TURN | 1 | |
| LLA1007A052 | SETTING FIXTURE | 1 | |
| LTCT14610-01 | Fixture Assembly, Pressure Test Set | 1 | |
| MIT65B18301 | PIN SET - RUDDER HINGE ALIGNMENT FIXTURE | 1 | |
| MIT65B82429 | SETTING FIXTURE - POSITION TRANSMITTER, STABILIZER | 1 | |
| MITK55006-74 | TORQUE TOOL REACTION FIXTURE EQUIPMENT - LAMP SET | 1 | |
| NT204M1 | COPTICAL STROKE SETTING FIXTURE | 1 | |
| OT900-0239 | Seat Track Setting Fixture | 1 | |
| OT900-0247 | FIXTURE-SEAT TRACKS SETTING | 5 | |
| OT900-0927 | FIXTURE TRACK SETTIN | 2 | |
| PWA71593 | FIXTURE SET, AIRCRAF | 1 | |
| PWC34040 | FIXTURE CARRIER SET | 1 | |
| PWC40101 | FIXTURE-SETTING | 1 | |
| PWC40102 | FIXTURE-SETTING | 1 | |
| PWC40249 | FIXTURE SETTING IGV | 1 | |
| PWC40673 | Setting fixture | 1 | |
| PWC50924 | SETTING FIXTURE | 1 | |
| PWC51379 | SETTING FIXTURE | 1 | |
| PWC77021 | ROD SETTING FIXTURE | 2 | |
| PWC86170 | SETTING FIXTURE | 1 | |
| PWC86386 | SETTING FIXTURE | 1 | |
| Q21806 | Settling Fixture | 1 | |
| Q21806 PM | SETTLING FIXTURE | 1 | |
| RB T101508 | HOLDING FIXTURE SET, MAIN TRANSMISSION | 2 | |
| RB T103056 | Valve Assembly Holding Fixture Set | 1 | |
| SF1-P462A0001 | SETTING FIXTURE | 1 | |
| SF1-P665A0015-00 | SETING FIXTURE FOR P665A0001 | 1 | |
| ST879AF | Holding Fixture - Hand Presetting Tools, ST879A | 7 | |
| ST879AF-1 | Holding fixture for hand setting tools | 4 | |
| T 27306 | Setting Fixture Metering Valve | 1 | |
| T-27306 | SETTING FIXTURE METERING VALVE | 1 | |
| T10-00110-01 | GSM 85 SLIP CLUTCH SET FIXTURE | 5 | |
| T101508 | HOLDING FIXTURE SET, MAIN TRANSMISSION | 1 | |
| T103063 | TOOL SET, HOLDING FIXTURE, ENGINE ADAPTER | 1 | |
| T25777 | Fixture-setting | 1 | |
| T25803 | SETTING FIXTURE - THROTTLE LEVER | 1 | |
| T26781 | FIXTURE SETTING | 1 | |
| T27289 | Fixture, Holding Metering Valve Assy Preset | 1 | |
| T27306 | Setting Fixture Metering Valve | 1 | |
| T3009208 | BEARING PRELOAD SETTING FIXTURE | 1 | |
| T3009541 | BRUSH TENSION SETTING FIXTURE | 1 | |
| T3159-010 | LVDT SETTING FIXTURE | 1 | |
| T3159-10 | Setting Fixture | 1 | |
| T327265-9001 | FM CARD SET STACK FIXTURE | 1 | |
| T3779-20 | TEST FIXTURE TO SET EXTENDED LENGHT | 1 | |
| T86449 | SETTING FIXTURE | 1 | |
| TB3120G001 | Blade Setting Fixture | 1 | |
| TE65-73701 | Fixture Set -Compass Swinging Target | 1 | |
| TEK-5006/5007 ASY | Transducer Assembly and Manipulating Fixture set, w/ Plunger and Syringe | 1 | |
| TEKIT-5006/5007 | Transducer Assembly & Manipulating Fixture Set, Includes all items per 767 PT4 57-50-05 PG9 FIG4, TEK-5006,TEK-5006-C1,TEK-5006-C2, TEK-5007, TEK-5007-C1, Manipulating Rod, Syringe, Cable, Couplant & 1450 Pelican Case *Does not include NDT694 & NDT695 | 1 | |
| TF31840 | CYCLING AND SET-UP FIXTURE | 1 | |
| TF50B27522 | SET OF BACKLASH MEASURING FIXTURES | 1 | |
| TMA2361 | GEARSET INTALLATION FIXTURE | 1 | |
| TSFFT1W2820-2 | SET, TEST SUPPORT FIXTURE, NGS SYSTEM, BAC | 1 | |
| TT09925 | SETING FIXTURE FOR P665A0001 | 1 | |
| UTAS-T3779-20 | TEST FIXTURE TO SET EXTENDED LENGH | 1 | |
| lC6274 | FIXTURE SET, INSPECTION - LPT STATOR SEAL, STG. 2 | 1 | |
| lC6279 | FIXTURE SET, INSP. LPT STATOR SEAL, STAGE 4 TF39 ENG. | 1 | |
| lC6l93 | FIXTURE SET, MACHINING - FRONT COMPRESSOR STATOR | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
