| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 2C14124G02 | FIXTURE SEAL | 6 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 114-441 | SEAL INSPECTION FIXTURE (CALIBRATION) | 1 | |
| 067-00-0431 | FLANGE SEALING SURFACE LOCATION FIXTURE | 1 | |
| 100-47823 | Seal assembly fixture | 1 | |
| 10C1218 | FIXTURE - PULLER - HP TURB AFT AIR SEAL | 1 | |
| 10C1218G01 | FIXTURE, PULLER - HPT AFT AIR SEAL (AFT AIR SEAL PULLER FIXTURE) | 1 | |
| 10C1218G02 | FIXTURE, PULLER - HPT AFT AIR SEAL (PULLER FIXTURE) (HIGHER REMOVAL FORCE FOR THE AFT AIR SEAL 2044M65P03) | 1 | |
| 10C1349G01 | Fixture,puller-fan shaft sealing sleeve | 1 | |
| 10C2149 | OMNI SEAL INST FIXTURE | 1 | |
| 11-10830 | AIR SEALING FIXTURE | 1 | |
| 1106469 | PRESSURE SEAL INSTALLATION/ REMOVAL FIXTURE | 1 | |
| 1106569-2 | Pressure Seal Remover Fixture | 1 | |
| 114-227 | SEAL INSPECTION FIXTURE | 1 | |
| 114-432 | SEAL INSPECTION FIXTURE | 1 | |
| 114-441 | GREASE SEAL EXAMINATION FIXTURE | 5 | |
| 114-759-1 | SEAL INSPECTION FIXTURE 1 | 1 | |
| 114-759-2 | SEAL INSPECTION FIXTURE 2 | 1 | |
| 11C3006 | FIXTURE - INSTALL/REMOVE-HP TURB RTR INNER STG SEAL | 1 | |
| 11C3042 | FIXTURE - CHILL - INTERSTAGE SEAL | 1 | |
| 11C3063 | FIXTURE - CHIL-STATIONARY SEAL & IGV SHROUD | 1 | |
| 11C3063G01 | FIXTURE, CHILL - STATIONARY SEAL AND IGV SHROUD | 1 | |
| 11C3065 | FIXTURE - REMOVAL-HPTR AFT SEAL | 1 | |
| 11C3065G01 | Fixture, removalaft seal,hpt rotor | 1 | |
| 11C3076 | FIXTURE - RMV/INST CMBSTR DIFFUSER NOZ STG 1 HPT NOZ SEAL | 1 | |
| 11C3147 | FIXTURE - RUN OUT-CDP SEAL/HPT ROTOR | 1 | |
| 11C3147G02 | Fixture, Run Out- Cdp Seal/Hpt Rotor | 1 | |
| 11C3166 | FIXTURE, I/R - SEAL ROTATING, NO. 1 BRG | 1 | |
| 11C3166G04 | Fixture install remove seal rotating no 1 bearing | 1 | |
| 11C3354 | FIXTURE - INSTALL/REMOVE - HPT INTERSTAGE SEAL | 1 | |
| 11C3366G01 | Fixture,turnover/lifting,cdp seal hpcr | 1 | |
| 11C3366G02 | Fixture,turnover/lifting,cdp seal hpcr | 1 | |
| 11C3411 | FIXTURE - INSTALL-CARBON SEAL - NO. 1 BRG | 1 | |
| 11C3428 | FIXTURE - TEST-CARBON SEAL - NO. 1 BRG | 1 | |
| 11C3428G01 | Fixture,test-carbon seal,no 1 brg | 1 | |
| 11C3437 | FIXTURE, REMOVAL - SEAL, LPT AFT | 1 | |
| 11C3437G01 | Fixture,removal-seal,lpt aft | 1 | |
| 11C3439 | FIXTURE - PROTECTOR/INSTALLATION-NOZZLE COVER - FWD OUTER SEAL | 1 | |
| 11C3440 | FIXTURE - PUSHER/PULL CARBON SEAL NO 1 BRG | 1 | |
| 11C3440G01 | Fixture,pusher/pull carbon seal No.1 brg | 1 | |
| 11C3484 | FIXTURE - INSPECT/RESTRAIN HPTR AFT SEAL | 1 | |
| 11C3484G02 | Fixture,restraining-aft seal,hpt rotor | 1 | |
| 11C3485G01 | Fixture Machining-Seal Forward-Hpt Rotor | 1 | |
| 11C3487 | FIXTURE - INSPECTION-SEAL - SUMP-HPT ROTOR | 1 | |
| 11C3487G01 | Fixture，inspection-seal，sump-HPT rotor | 1 | |
| 11C3489G01 | Fixture, Inspection/ Machining Restrainingaft Bulkhead Seal | 1 | |
| 11C3493G01 | Fixture,inspection restrain-lpt stg 2and 4 interstage seal | 1 | |
| 11C3495G01 | Fixture,inspection/restraining-lpt stage 3&6 interstage seal | 1 | |
| 11C3497G01 | Fixture Restraining-No 5 Brg Outer Rotating Air Seal | 1 | |
| 11C3499 | FIXTURE - INSPECT RESTRAIN-LPT FWD SEALS | 1 | |
| 11C3590 | FIXTURE - RUNOUT-LPT BRUSH SEAL (ENGLISH) (USA) | 1 | |
| 11C4204G01 | Fixture,inspection/machining restraining,No.3 rotating seal | 1 | |
| 11C4206 | FIXTURE - RESTRAINING - HP TURBINE FORWARD OUTER SEAL | 1 | |
| 11C4206G01 | Fixture, Restraining - Hp Turbine Forward Outer Seal | 1 | |
| 11C4210G01 | Fixture,inspect/machine restraining-no.1 carbon seal runner | 1 | |
| 11C4211G01 | Fixture,restraining-no 1 bearing stationary seal | 1 | |
| 11C4214G01 | Fixture,restraining-no 5 bearing seal hsg | 1 | |
| 11C4215 | FIXTURE - RESTRAINING SEAL AIR/OIL ROT NO 4 BRG | 1 | |
| 11C4215G01 | Fixture,restraining-seal,rotating,air,No 4 bearing | 1 | |
| 11C4220G01 | Fixture,inspection-restrain-lpt interstage seal 5&7 | 1 | |
| 11C4223G01 | Fixture,restraining-seal stationary.no 3 bearing | 1 | |
| 11C4227G01 | Fixture,restraining-drain seal,shroud rear no.3 bearing | 1 | |
| 11C4229G01 | Fixture,restraining-seal rotating oil rear no 3 bearing | 1 | |
| 11C4232 | FIXTURE - RESTRAINING-SEAL - STATIONARY INNER FWD NO 5 BEARING | 1 | |
| 11C4232G01 | Fixture,restraining-seal,stationary inner fwd,No 5 bearing | 1 | |
| 11C4247 | FIXTURE - RESTRAINING RING MATING SEAL ROT NO 5 BRG | 1 | |
| 11C4249 | FIXTURE - START & RUN TCF SEAL RUNS (SOURCE CTRL-RHINESTAHL) | 1 | |
| 11C4292 | FIXTURE - INSTALLATION-EXPANSION - NO 5 BRG CARBON SEAL | 1 | |
| 11C4418G01 | Fixture,inspection-lpt stg 3&6 interstage seal | 1 | |
| 11C4434 | FIXTURE, REMOVAL - SEAL, LPT AFT | 1 | |
| 11C4434G01 | Fixture, Removal -Seal, Lpt Aft | 1 | |
| 11C4438G01 | Fixture,inspection re'strain-lpt stg 5 interstage seal | 1 | |
| 11C4452G01 | Fixture,inspection restrain-lpt stg 2and 4 interstage seal | 1 | |
| 11C4525 | FIXTURE - TORQUE-CDP SEAL JOINT | 1 | |
| 11C4562 | FIXTURE - INSTALLATION - INTERSTAGE SEAL - HPTR | 1 | |
| 11C4562G03 | Fixture,installtion-interstage seal high pressure turbine rotor | 1 | |
| 11C4563 | FIXTURE - SEPARATION- INTERSTAGE SEAL / BLADE RETAINER HPTR | 1 | |
| 11C4563G01 | Fixture,separation-interstage seal/blade retainer hptr | 1 | |
| 11C4623 | FIXTURE - CLAMP-STG 10 OGV SEALING RING | 1 | |
| 11C4623G01 | Fixture,clamp-stage 10 0gv sealing ring | 1 | |
| 11C4658 | FIXTURE, I/R - HPT INTERSTAGE STAGE SEAL | 1 | |
| 11C4687 | FIXTURE, REMOVE - CDP SEAL AND STAGE 6-10 SP JOINT | 1 | |
| 11C4687G01 | FIXTURE, REMOVE - CDP SEAL AND STAGE 6-10 SP JOINT | 1 | |
| 11C4729 | FIXTURE, PRESS - SEAL | 1 | |
| 11C4888 | FIXTURE - TORQUE-CDP SEAL JOINT | 1 | |
| 18C1013 | FIXTURE, REMOVE - HPT AFT SEAL | 1 | |
| 18C1013G01 | Fixture,removal-hpt aft seal | 1 | |
| 18C1019 | FIXTURE, REMOVE - NO. 4 BRG. & SEALS | 1 | |
| 18C1019G01 | Fixture, Remove-Seal Rotating Aft N0 4Roller Brg & Aft Seal, Hpt | 1 | |
| 18C1020G02 | Fixture,install - no 4 brg & seals | 1 | |
| 18C1041G01 | Fixture, Removeno 4 & 5 Carbon Seal | 1 | |
| 18C1043G01 | Fixture,install/remove-hpt intershaft seal arm | 1 | |
| 18C1045G01 | Fixture, Installtcf Seal, Fwd | 1 | |
| 18C1062 | FIXTURE, REMOVE - M10 SEAL | 1 | |
| 19C0524G01 | Fixture, Install - Aft Air Seal | 1 | |
| 19C0628G01 | Fixture Install-Aft Seals Inner Race&Oil Scoop No 4 Bearing | 1 | |
| 19C0637G01 | Fixture Install-Aft Seal No.4 Bearing Housing | 1 | |
| 1C6274 | FIXTURE SET, INSPECTION - LPT STATOR SEAL, STG. 2 | 1 | |
| 1C6274 REV B | FIXTURE SET, INSPECTION - LPT STATOR SEAL, STG. 2 | 1 | |
| 1C6276 | STAGE 4, SEAL HOLDING FIXTURE | 1 | |
| 1C6277 | STAGE 5, SEAL HOLDING FIXTURE | 1 | |
| 1C6278 | STAGE 6, SEAL HOLDING FIXTURE | 1 | |
| 1C6279 | FIXTURE SET, INSP LPT STATOR SEAL STG 4 TF39 ENG | 1 | |
| 1C6279 REV B | FIXTURE SET, INSP. LPT STATOR SEAL, STAGE 4 TF39 ENG. | 1 | |
| 1C6280 | FIXTURE , INSP. LPT STATOR SEAL, STG. 3 | 1 | |
| 1C6280 REV C | FIXTURE , INSP. LPT STATOR SEAL, STG. 3 | 1 | |
| 1C6281 | FIXTURE, INSP. LPT STATOR SEAL, STG. 5 | 1 | |
| 1C6281 REV C | FIXTURE, INSP. LPT STATOR SEAL, STG. 5 | 1 | |
| 1C6282 | FIXTURE, INSP. LPT STATOR SEAL, STG. 6 | 1 | |
| 1C6282 REV B | FIXTURE, INSP. LPT STATOR SEAL, STG. 6 | 1 | |
| 1C6284 | FIXTURE SET, REPAIR - PT INTERSTAGE SEAL, STAGES 2-6 | 1 | |
| 1C8161 | FIXTURE, ASSY HP TURB. INTERSTAGE SEAL | 1 | |
| 1C8161 REV C | FIXTURE, ASSY HP TURB. INTERSTAGE SEAL | 1 | |
| 1C8182 | FIXTURE SET - REMOVAL MATING SEAL | 2 | |
| 1C8182 REV B | FIXTURE SET - REMOVAL MATING SEAL | 1 | |
| 1C8182G01 | Fixture set, Mating Seal Removal | 1 | |
| 1C9029G01 | FIXTURE, CONC -NO. 5 AND 7 BR.SEALS | 1 | |
| 1C9642 | FIXTURE - LIFT / INSTALL - SPACER SEAL AFT | 1 | |
| 1X56131407 | FIXTURE SEAL INSTALLATION | 1 | |
| 1X56131407/PHP | FIXTURE SEAL INSTALLATION 1X56131407EQUAL | 1 | |
| 2024067 | Fixture-Press Seal And Shim | 1 | |
| 2024067-1 | Seal Press Fixture | 1 | |
| 2024151-1 | SEAL PRESS FIXTURE | 1 | |
| 2024370-1 | Seal Press Fixture | 1 | |
| 2024649-1 | Seal Installer Fixture | 1 | |
| 2024821-1 | FIXTURE TEST, BEARING SEAL | 1 | |
| 2128M93 | THE CARBON SEAL REPLACEMENT FIXTURE | 1 | |
| 2129M59G02 | Carbon seal replacement fixture | 1 | |
| 216564 | Shaft seal assy fixture for seal carrier | 1 | |
| 21C7237G01 | GRINDING FIXTURE, COMPRESSOR DISCHARGE ROTATING SEAL | 1 | |
| 21C7406P01 | FIXTURE, HOLDINGSEAL | 1 | |
| 2566442 | Seal Installation Fixture | 1 | |
| 23051180 | FIXTURE, INST, PROP SHAFT SEAL | 3 | |
| 23055718 | Fixture – Flow Test, No. 7 Carbon Seal | 1 | |
| 23055719 | Fixture – Flow Test, No. 6 Carbon Seal | 1 | |
| 23055720 | Fixture – Flow Test, No. 5 Carbon Seal | 1 | |
| 23055721 | Fixture – Flow Test, No. 4 Carbon Seal | 1 | |
| 23055791 | Fixture – Flow Test, No. 0 Carbon Seal | 1 | |
| 23060655 | Fixture – Flow Test, No. 6 Carbon Seal | 1 | |
| 23060731 | Fixture – Grind, Center Sump Forward Labyrinth Seal | 1 | |
| 23060772 | Fixture – Grinding, Rear Stationary Seal | 1 | |
| 23060774 | Fixture – Grinding, Air Seal, Rear Center Sump | 1 | |
| 23063520 | Fixture – Holding, Rear Stationary Seal | 1 | |
| 23068488 | Fixture – Grinding, Air Seal, Rear Compressor | 1 | |
| 23068591 | Fixture – Flow Test No. 6 Carbon Seal | 1 | |
| 23068592 | Fixture – Flow Check No. 5 Carbon Seal | 1 | |
| 23068617 | Fixture – Flow Check No. 4 Carbon Seal | 1 | |
| 23076508 | Fixture – Flow Check No. 4 Carbon Seal | 1 | |
| 291441-1 | FIXTURE LEAKAGE SEAL TEST | 1 | |
| 293323-1 | SEAL ALIGNMENT FIXTURE | 1 | |
| 294527-1 | FIXTURE SEAL, HOLDING | 1 | |
| 296165-2 | ALIGNMENT FIXTURE, SEAL | 1 | |
| 296447-1 | Fixture-Seal | 1 | |
| 2C 14094G06 | FIXTURE, SEAL CHECK NO. 4 BEARING AND SEAL | 1 | |
| 2C14094 | FIXTURE, SEATCHECK-NO. 4B BEARING & SEAL | 1 | |
| 2C14094 REV Y | FIXTURE, SEATCHECK-NO. 4B BEARING & SEAL | 1 | |
| 2C14094G05 | FIXTURE, SEATING CHECK ‐ NO. 4B BEARING AND SEAL | 1 | |
| 2C14094G06 | FIXTURE, SEATING #4 BEARING & SEAL | 1 | |
| 2C14124 | FIXTURE,SEAL-PRESSURIZE AGB | 1 | |
| 2C14124 REV D | FIXTURE, SEAL/PRESSURIZE ACCESS. GEARBOX | 1 | |
| 2C14124G02 | G/BOX SEAL PRESS. TEST FIXTURE | 6 | |
| 2C14138 | FIXTURE, REMVL-MATING SEAL RINGS - ACCESS GEARBOX | 1 | |
| 2C14138 REV B | FIXTURE, REMOVAL-MATING SEAL RINGS - ACCESS. GEARBOX | 1 | |
| 2C14138G01 | FIXTURE REMOVAL MATING SEAL RING | 11 | |
| 2C14138G02 | FIXTURE REMOVAL MATING SEAL RINGS ACC GEARBOX CF6-80C2 | 14 | |
| 2C14174G02 | FIXTURE, CONCENTRICITY-NO.6 BRG. AND SEALS | 1 | |
| 2C14784 | FIXTURE, REMOVE-HPT ROTOR AFT OUTER AIR SEAL | 1 | |
| 2C14784G01 | FIXTURE, REMOVE - HPT ROTOR AFT OUTER AIR SEAL | 1 | |
| 2C14785 | FIXTURE, PULL-HPT ROTOR AFT AIR SEALS | 1 | |
| 2C14785 REV B | FIXTURE, PULL-HPT ROTOR AFT AIR SEALS | 1 | |
| 2C14785G01 | FIXTURE, PULL-HPTR AFT AIR SEALS | 2 | |
| 2C14785G02 | FIXTURE, PULL - HPT ROTOR AFT AIR SEALS | 1 | |
| 2C14785G05 | FIXTURE, PULL- HPTR AFT AIR SEALS ( PULL FIXTURES ) | 1 | |
| 2C14790 | FIXTURE, RUNOUT - NO. 3 BEARING/SEALS | 1 | |
| 2C14790 REV C | FIXTURE, RUNOUT - NO. 3 BEARING/SEALS | 1 | |
| 2C14790G01 | FIXTURE, RUNOUT - NO. 3 BEARING SEALS | 2 | |
| 2C14981G01 | FIXTURE, LIFT - ROTATING INTERSTAGE SEAL | 1 | |
| 2C18096G01 | FIXTURE, INSTL - ROTATING INNER SEAL RETAINER | 1 | |
| 2C18118 | FIXTURE, GAGE GO- STATIONARY AIR/OIL SEAL, NO 4 BRG | 1 | |
| 2C4094 | FIXTURE, SEATCHECK- NO 4B BEARING AND SEAL | 1 | |
| 2C5786G01 | FIXTURE - MACHINING SUMP SEALS | 1 | |
| 2C6145 | FIXTURE, CONCENTRICITY-FAN FRAME, NO. 3 BRG. SEALS | 1 | |
| 2C6145 REV H | FIXTURE, CONCENTRICITY-FAN FRAME, NO. 3 BRG. SEALS | 1 | |
| 2C6260G01 | Fixture,alighment-stationary oil seal | 1 | |
| 2C6567G02 | Fixture welding tig seal stationary air Brg4R | 1 | |
| 2C6568G03 | Fixture welding tig seal stationary air rrg4b | 1 | |
| 2C6581 | FIXTURE, ASSEMBLY - CDP SEAL | 1 | |
| 2C658I | FIXTURE, ASSEMBLY - CDP SEAL | 1 | |
| 2C6998G05 | FIXTURE SET REMOVAL MATING SEAL RINGS-ACCESORY GEARBOX | 2 | |
| 2C6998G06 | FIXTURE SEAL REMOVAL | 3 | |
| 2C6I45 | FIXTURE, CONCENTRICITY-FAN FRAME, NO. 3 BRG. SEALS | 1 | |
| 2C7109G01 | Fixture,alloying-seal,stationary air,cdp/lpt | 1 | |
| 2C7147G02 | FIXTURE, HOLDING, ROT AIR SEAL, NO. 4 BEARING | 1 | |
| 2C7147P02 | FIXTURE, HOLDING, ROT AIR SEAL, NO. 4 BEARING | 1 | |
| 2C7148G03 | Fixture, Holding, Nut, Seal, No. 4R Brg | 1 | |
| 2C7149G01 | Fixture, Holding, Air Vent Seal, No. 4R Brg | 1 | |
| 2C8040G01TK | FIXTURE CONCENTRICITY-NO.3 BRG. STATIONARY AIR &OIL SEALS | 1 | |
| 2C8072G02 | G/B DRIVE SHAFT SEAL FIXTURE | 2 | |
| 2C8072G03 | FIXTURE SEAL REMOVAL | 1 | |
| 2C81322G01 | Fixture, Puller - No 1 Brg Inner Race & Seal | 1 | |
| 2C81327G01 | Fixture, Puller - No 4 Oil Seal & Inner Race | 1 | |
| 2C81328G01 | Fixture,puller-No 4 oil seal,hpt rotor | 1 | |
| 2C91030G01 | FIXTURE - #6 SEAL | 1 | |
| 2C91122G01 | FIXTURE-MACHINING TURBINE SEAL | 1 | |
| 2C91123G01 | FIXTURE-MACHINING TURBINE SEAL | 1 | |
| 2C91124G01 | FIXTURE-MACHINING TURBINE SEAL | 1 | |
| 473015 | REPLACEMENT HOSES TOOL NO. 473015 THIS KIT CONTAINS ALL HYDRAULIC SEALS CAPABLE OF REBUILDING ONE HYDRAULIC JACK OF THE AA293268 CYLINDER HEAD/MAIN BEARING HYDRAULIC FIXTURE. | 1 | |
| 501353 | FIXTURE – 501 SERIES LLL VANE & SEAL SUPPORT STRESS RELIEVE | 1 | |
| 5035-0023W01 | LOWER CAM EXT SEALS ASSY FIXTURE | 1 | |
| 831630 | Fixture, Flush, No. 2 Bearing Seal Retainer | 1 | |
| 6755010 | SEAL FIXTURE | 1 | |
| 6796761 | Comp Stator Vane Corrugated Seal fixture | 1 | |
| 6796764 | Fixture Assy Corrugated seal | 2 | |
| 6799596 | FIXTURE -INSTALLATION, SPEED SENSITIVE CONTROL SEAL | 2 | |
| 6799630 | COMP. RTR LAYBRINTH STATOR SEAL CHECKING FIXTURE | 1 | |
| 6872288 | FIXTURE - INSTALLATION AND REMOVAL, STARTER SHAFT SEAL | 1 | |
| 6877003 | TURNING FIXTURE, SUPPORT MOUNTING FLANGE HOLDS FUEL NOZZLE FOR MACHINING OF MOUNTING FLANGE SEAL SURFACE. | 1 | |
| 6877021 | SEAL FIXTURE SECONDARY ORIFICE | 1 | |
| 6877025 | SEAL RING ADAPTER FIXTURE VALVE END | 1 | |
| 6877029 | LEAK TEST FIXTURE, CARTRIDGE VALVE HOLDS CARTRIDGE VALVE FOR CHECKING VALVE SEAL. | 1 | |
| 6897102 | PRIMARY SUPPORT RING FIXTURE LOCATES AND SEALS PRIMARY TO SUPPORT JOINT DURING PREWELD TESTING. | 1 | |
| 6897103 | HOLDING FIXTURE TIP SEAL | 1 | |
| 6897104 | SEAL FIXTURE PRIMARY ORIFICE | 1 | |
| 7C1160G01 | Fixture,installation-interstage seal,hptr | 1 | |
| 7C1163G01 | Fixture,separation-interstage seal/blade retainer | 1 | |
| 7C1500G01 | Fixture，retaining-AFT bulkhead seal | 1 | |
| 7C1502G01 | Fixture，restraint-FWD support seal | 1 | |
| 7C1512G01 | Fixture，restraint-AFT support seal | 1 | |
| 7C2006G03 | Fixture,install/remove-hp turb inner stg seal | 1 | |
| 7C2021 | FIXTURE - RUN OUT- CDP SEAL/HP TURB ROTOR | 1 | |
| 7C2142G01 | FIXTURE, REMOVAL - SEAL LPT AFT INNER | 1 | |
| 81268100 | WELDING FIXTURE ASSY FOR HERMEIC SEAL DISC ASSEMBLIES | 4 | |
| 833110-12 | FIXTURE, SEAL PRESSING | 1 | |
| 833543-1 | FIXTURE ASSEMBLY SEAL PRESS | 1 | |
| 833544-1 | FIXTURE REMOVAL SEAL | 1 | |
| 833667-1 | FIXTURE INSTALLATION AND REMOVAL SEAL | 1 | |
| 833667-2 | Seal Installation&Removal fixture | 1 | |
| 834044-1 | FIXTURE SEAL REMOVAL | 1 | |
| 834332-1 | Seal Removal Fixture | 1 | |
| 834349-1 | Seal Assembly Fixture | 1 | |
| 834383-1 | Rotor Seal Installation Fixture | 1 | |
| 834443- | SEAL REMOVAL FIXTURE | 1 | |
| 834447-1 | SEAL REMOVAL FIXTURE | 1 | |
| 835224 -1 | SEAL REMOVAL FIXTURE | 1 | |
| 835224-1 | SEAL REMOVAL FIXTURE | 1 | |
| 835558-1 | SEAL REMOVA FIXTURE | 1 | |
| 835801-1 | Seal Press Fixture | 1 | |
| 856A 2377G01 | FIXTURE CENTERING & HANDELING ROTATIONAL SEAL | 1 | |
| 856A1061G03 | Fixture Lift/Turn Disk & Seal Fwd | 7 | |
| 856A1092P01 | FIXTURE, HOLDING - HPT AFT OUTER SEAL (HOLDING FIXTURE) | 1 | |
| 856A1099 | FIXTURE, INSTALLATION AND REMOVAL - HPT AFT OUTER AIR SEAL | 1 | |
| 856A1099 G01 | Fixture Install/Removal ‐ HPT Aft Outer Air Seal | 6 | |
| 856A1099G01 | FIXTURE INSTALL/REMOVAL HPT AFT OUTER AIR SEAL | 6 | |
| 856A1099P01 | FIXTURE, INSTALL/REMOVAL - HPT AFT OUTER AIR SEAL (INSTALL/REMOVAL FIXTURE) | 1 | |
| 856A1171 | FIXTURE, PRESS TEST NO 3 BRG AFT AIR/OIL SEAL | 1 | |
| 856A1171G03 | FIXTURE, PRESS TEST, #3 BRG AFT AIR/OIL SEAL | 1 | |
| 856A1171G05 | FIXTURE, PRESSURE TEST - SEAL, STATIONARY, NO. 3 BEARING AFT (PRESSURE TEST FIXTURE) | 1 | |
| 856A1171G06 | FIXTURE, PRESS TEST, #3 BRG AFT AIR/OIL SEAL | 2 | |
| 856A1281G02 | FIXTURE LIFT HPT FRONT OUTER SEAL | 5 | |
| 856A1295G02 | FIXTURE - ALIGNMENT - CDP SEAL BOLT EROSION SHIELD | 5 | |
| 856A1374 | FIXTURE, INSTALL/REMOVE - AIR SEAL IGB (FIXTURE) | 1 | |
| 856A1374G02 | FIXTURE, I/R - AIR SEAL, IGB | 2 | |
| 856A1451P01 | FIXTURE HOLDING SEAL | 1 | |
| 856A1478 | FIXTURE, REMOVAL NO. 3 BRG. AFT STATIONARY SEAL | 1 | |
| 856A1478 REV A | FIXTURE, REMOVAL NO. 3 BRG. AFT STATIONARY SEAL | 1 | |
| 856A1499G01 | Fixture Ins/Rem Air Seal | 1 | |
| 856A1603 | FIXTURE, I/R - HPTR FWD OUTER SEAL | 1 | |
| 856A1603G03 | FIXTURE, INSTALL/REMOVE - HPT ROTOR FWD OUTER SEAL | 3 | |
| 856A1603G05 | FIXTURE, I/R -HPTR FWD OUTER SEAL | 2 | |
| 856A1603G07 | FIXTURE, I/R -HPTR OUTER SEAL (CONFIG | 2 | |
| 856A1603G08 | FIXTURE, I/R -HPTR FWD OUTER SEAL | 3 | |
| 856A1621 | FIXTURE,LIFT I/R HPTR FWD SEAL | 1 | |
| 856A1621G01 | Fixture, Lift - Fixture Install/Remove, HP Turbine Rotor Forward Outer Seal (lift fixture) | 3 | |
| 856A1826 | FIXTURE, REMOVAL - NO. 3 BEARING AFT STATIONARY SEAL (REMOVAL FIXTURE) | 1 | |
| 856A1826G01 | Fixture, Install/Remove - No. 3 Stationary Air Seal (fixture) | 3 | |
| 856A1838G01 | FIXTURE, PULLER HPT FWD SHAFT (SEAL) | 5 | |
| 856A1845G01 | FIXTURE, ALIGNING- HIGH PRESSURE COMPRESSOR TO HOLD HP COMPRESSOR VANE SECTOR WHILE INSTALLING AND REMOVING SEALS | 3 | |
| 856A1868 | FIXTURE, INSTALL/REMOVE-HP TURB ROTOR FWD OUTER SEAL | 1 | |
| 856A1868G01 | Fixture Install/Remove - HPTR Forward Outer Seal | 4 | |
| 856A1868G02 | FIXTURE, INSTALL/REMOVE-HP TURB ROTOR FWD OUTER SEAL | 1 | |
| 856A1868G03 | FIXTURE, INSTALL/REMOVE-HP TURB ROTOR FWD OUTER SEAL | 3 | |
| 856A2377G01 | FIXTURE CENTERING & HANDELING ROTATIONAL SEAL | 1 | |
| 856A2409G02 | REMOVAL FIXTURE - LPT STG 1 OUTER STA AIR SEAL | 2 | |
| 856A2961G02 | INS/REM FIXTURE - AGB HANDCRANKING SEALOL | 8 | |
| 856A2961G03 | INS/REM FIXTURE - AGB HANDCRANKING SEALOL & MAGNETIC SEAL | 13 | |
| 856A3287 | FIXTURE, HOLDING - ROTATING AIR SEAL, BOLT HEADS (HOLDING FIXTURE) | 1 | |
| 856A3287G02 | FIXTURE, HOLD.-AIR SEAL BOLT HEADS | 3 | |
| 856A3416 G01 | Fixture Disassembly ‐ Rotating Air Seal | 3 | |
| 856A3416G01 | FIXTURE DISASSEMBLY ‐ ROTATING AIR SEAL | 3 | |
| 856A3752 | FIXTURE, REMOVAL - STAGE 1-2-3 OUTER STATIONARY AIR SEAL (FIXTURE) | 1 | |
| 856A3752 G04 | Removal Fixture - Stage 1, 2 and 3 Outer Sta Air Seal | 8 | |
| 856A3752G02 | Fixture, Remove Stage 1-2-3 Outer Stat Air Seal | 1 | |
| 856A3752G04 | Fixture, Removal - Stage 1-2-3 Outer Stationary Air Seal (fixture) | 8 | |
| 856A4026G02 | Fixture,holding-no.3 brg fwd stationary oil seal | 1 | |
| 856A4076G01 | Fixture,weld/machine-ccmbustor,outer liner seal flange | 1 | |
| 856A4076G03 | Fixture,weld/machine-ccmbustor,outer liner seal flange | 1 | |
| 856A4206 | FIXTURE, WELD/MACHINE - SEAL LIP, COMBUSTOR, AFT | 1 | |
| 856A4206G02 | FIXTURE, WELD/MACHINE – SEAL LIP, COMBUSTOR, AFT | 1 | |
| 856A5636G01 | EDM FIXTURE - LPT NOZZ STG 1 STAT AIR SEAL USE | 1 | |
| 856A5636G02 | EDM FIXTURE - LPT NOZZ STG 1 STAT AIR SEAL USE | 1 | |
| 856A5636G03 | EDM FIXTURE - LPT NOZZ STG 1 STAT AIR SEAL USE | 1 | |
| 856A5636G04 | EDM FIXTURE - LPT NOZZ STG 1 STAT AIR SEAL USE | 1 | |
| 856A5638G01 | EDM FIXTURE - LPT FWD ROTATING AIR SEAL | 1 | |
| 856A5638G02 | EDM FIXTURE - LPT FWD ROTATING AIR SEAL | 1 | |
| 856A5641G04 | Fixture Weld And Machine Rear Rotating Air Seal Serrtions | 1 | |
| 856A5655G01 | FIXTURE CHECK TILT ANGLE STAGE 2 OUTER STATIONARY AIR SEAL | 3 | |
| 856A5656G01 | FIXTURE CHECK TILT ANGLE STAGE 3 OUTER STATIONARY AIR SEAL | 2 | |
| 856A6776G02 | Fixture checking machining outer stationary air seal lpt stg1 | 1 | |
| 856A6778G01 | Fixture checking machining outer stationary air seal lpt stg 2 | 1 | |
| 856A6780G01 | Fixture checking machining outer stationary air seal lpt stg3 | 1 | |
| 856A6782G01 | Fixture checking/machining outer stationary air seal lpt stg 4 | 1 | |
| 856A6784G01 | Fixture Machining-Inner Stationary Air Seal Lpt Stg 2 | 1 | |
| 856A6786G01 | Fixture Machining-Inner Stationary Air Seal Lpt Stg 3 | 1 | |
| 856A6788G01 | Fixture Machining-Inner Stationary Air Seal Lpt Stg 4 | 1 | |
| 8813535000 | SEALING FIXTURE | 1 | |
| 8813824000 | SEALING RING FIXTURE | 3 | |
| 8817958000 | SEALING FIXTURE | 1 | |
| 8C2011G02 | Fixture,install/remove-hpt rotor,fwd seal | 1 | |
| 8C2011G04 | Fixture,install/remove-hpt rotor,fwd seal | 1 | |
| 8C2015G02 | Fixture,lift&turn-midseal hptr | 1 | |
| 8C2021G02 | Fixture,chill-hpt rotor iinterstage seal/stage 1 aft blade retainer | 1 | |
| 8C2022G01 | Fixture, rtnr - no 4 brg inner race/oil scoop/ rotating seal/fwd seal | 1 | |
| 8C2025G01 | fixture removal aft seal hpt rotor | 1 | |
| 8C2028G02 | Fixture, Remove- Hptr Interstage Seal | 1 | |
| 8C2030G01 | fixture chill install stg 1 hpt blade retainer hpt interstage seal | 1 | |
| 8C2044G01 | fixture remove no 4 carbon seal runner | 1 | |
| 8C2047G01 | fixture removal fwd rotating seal oil hptr | 1 | |
| 8C2060 | FIXTURE, CHILL - HPT AFT ROTATING SEAL | 1 | |
| 8C2067 | FIXTURE, INSTALLATION - #4 BEARING CARBON SEAL | 1 | |
| 8C2067G03 | fixture installation no 4 bearing carbon seal holder | 1 | |
| 8C2071 | FIXTURE, REMOVAL - CARBON SEAL, NO. 4 BEARING | 1 | |
| 8C2071G01 | fixture removal no 4 bearing carbon seal | 1 | |
| 8C2071G02 | fixture removal no 4 bearing carbon seal | 1 | |
| 8C2079G01 | Fixture，install stage 2 disk and midseal hptr | 1 | |
| 8C2083G01 | Fixture，install/remove aspirating seal，M10 | 1 | |
| 8C2087 | FIXTURE, ALIGNMENT - ASPIRATING AIR SEAL | 1 | |
| 8C2087G01 | Fixture,alignment-aspirating air seal | 1 | |
| 8C2123 | FIXTURE, REMOVAL-CDP SEAL | 1 | |
| 8C2123G02 | Fixture,removal-cdp seal | 1 | |
| 8C2137 | FIXTURE, DUMMY CDP SEAL | 1 | |
| 8C2237G02 | Fixture,removal-cdp static seal&fins | 1 | |
| 8C2423G01 | Fixture,installation-no 5 bearing carbon seal | 1 | |
| 8C2509G02 | Fixture, Remove - Seal Rotating, No 1 Brg | 1 | |
| 8C2511 | FIXTURE, PUSHER/PULLER CARBON SEAL NO. 1 BEARING | 1 | |
| 8C2511G01 | Fixture, Pusher/Puller-Carbon Seal, Sp No 1 Bearing | 1 | |
| 8C2513G01 | Fixture Install-No 1 Bearing Carbon Seal | 1 | |
| 8C2514 | FIXTURE, TEST - CARBON SEAL - NO. 1 BEARING | 1 | |
| 8C2514G01 | Fixture,test-carbon seal,no 1 bearing | 1 | |
| 8C2527 | FIXTURE, REMOVE – INTERSHAFT SEAL | 1 | |
| 8C2527G01 | Fixture Remove-Intershaft Seal | 1 | |
| 8C2716G01 | Fixture,installation fwd outer seal | 1 | |
| 8C2716G02 | Fixture,installation fwd outer seal | 1 | |
| 8C2717 | FIXTURE - RMV/INST FWD OUTER SEAL - LITE (PRODUCTION TOOL) | 1 | |
| 8C2745G01 | fixture removal housing piston ring seal inner | 1 | |
| 8C2806G01 | Fixture,separation-insterstage seal/blade retainer | 1 | |
| 8C2833 | FIXTURE - LIFT - HPTR MIDSEAL | 1 | |
| 8C2833G01 | Fixture,lift-hptr midseal | 1 | |
| 8C2958G01 | Fixture，restraint-hpt forward seal | 1 | |
| 8C2959G01 | Fixture，restraint-hptr mid seal | 1 | |
| 8C2970G01 | Fixture,restraint-n1b carbon seal support | 1 | |
| 8C2971G01 | Fixture Restraint-N1B Rotating Oil Seal | 1 | |
| 8C2975G01 | Fixture,restraint - N3B rotating seal | 1 | |
| 8C3193 | FIXTURE - RESTRAINING - LPT STAGE 3 INTERSTAGE SEAL | 1 | |
| 8C3193G01 | Fixture,Restraining-seal,lpt rotor stage 3 | 1 | |
| 8C3197 | FIXTURE - RESTRAINING - NO 5 BRG OUTERROTATING AIR SEAL | 1 | |
| 8C3282G01 | Fixture,ramp& carbon seal,brg No.3 | 1 | |
| 8C3283G01 | Fixture,load apply-carbon seal ,brg No.3 | 1 | |
| 919266 | VACUUM SEAL FIXTURE | 1 | |
| 956A1022G01 | Fixture,install/remove-hpt rotor,fwd seal | 1 | |
| 956A1031 | FIXTURE - RTNR-NO 4 BRG INNER RACE/OIL SCOOP/ROTATING SEAL/FWD SEAL | 1 | |
| 956A1037 | FIXTURE - RESTRAINING - FWD ROTATING OIL SEAL NO. 4 BEARING | 1 | |
| 956A1037G01 | Fixture,restraining-fwd rotating oil seal no 4 bearing | 1 | |
| 956A1037G02 | Fixture,restraining-fwd rotating oil seal no 4 bearing | 1 | |
| 956A1040 | FIXTURE - REMOVAL-AFT SEAL - HPT ROTOR | 1 | |
| 956A1040G03 | Fixture,removal-aft seal hpt rotor | 1 | |
| 956A1040G04 | Fixture,removal-aft seal hpt rotor | 1 | |
| 956A1041G01 | Fixture,chill-hpt rotor iinterstage seal/stage 1 aft blade retainer | 1 | |
| 956A1042 | FIXTURE - SEPARATION - INTERSTAGE SEAL/BLADE RETAINER | 1 | |
| 956A1042G01 | Fixture,separation-interstage seal/blade retainer | 1 | |
| 956A1050 | FIXTURE REMOVE - NO. 4 SEAL RUNNER | 1 | |
| 956A1061G01 | Fixture, Remove - Stationary Seals, B-Sump | 1 | |
| 956A1064 | FIXTURE - INSTALL - STATIONARY OIL SEAL - FWD | 1 | |
| 956A1064G02 | Install Fixture - Stationary Oil Seal, Fwd | 1 | |
| 956A1065 | FIXTURE - INSTALL - CARBON SEAL - NO 4 | 1 | |
| 956A1065G03 | Fixture Install-Carbon Seal No 4 | 1 | |
| 956A1065G04 | Fixture Install-Carbon Seal No 4 | 1 | |
| 956A1098 | FIXTURE - LEAKAGE TEST-CARBON SEAL - N0 4. BEARING | 1 | |
| 956A1282 | FIXTURE - INSTALL/REMOVE- SHANK NUT - CDP STATOR SEAL | 1 | |
| 956A1351 | FIXTURE - REMOVE - HPT AFT STATIONARY SEAL | 1 | |
| 956A1502 | FIXTURE - TEST - NO. 3 CARBON SEAL | 1 | |
| 956A1502G01 | Fixture,test-no.3 carbon seal | 1 | |
| 956A1503 | FIXTURE - GUIDE - NO. 3 CARBON SEAL | 1 | |
| 956A1503G02 | Fixture，guide-No.3 carbon seal | 1 | |
| 956A1503G03 | Fixture，guide-No.3 carbon seal | 1 | |
| 956A1503G04 | Fixture，guide-No.3 carbon seal | 1 | |
| 956A1710G01 | Fixture, Measure-Hpt Rotor Stg 1 Disk & Midseal | 1 | |
| 956A1727 | FIXTURE - INSTALLATION - HPT FWD OUTER SEAL | 1 | |
| 956A1727G03 | Fixture,installation-hpt fwd outer seal | 1 | |
| 956A1736 | FIXTURE - INSTALLATION-HPT FWD OUTER SEAL | 1 | |
| 956A1736G01 | Fixture,installation-hpt fwd outer seal | 1 | |
| 956A1739G01 | Fixture,installation-hpt fwd outer seal | 1 | |
| 956A1740G01 | Fixture,installation-hpt fwd outer seal | 1 | |
| 956A1804 | FIXTURE - RESTRAINING - SEAL - TRANSITION DUCT - TCF | 1 | |
| 956A1805 | FIXTURE - RESTRAIN - SEAL ROTATING - OIL | 1 | |
| 956A1805G02 | ROTATING OIL SEAL RESTRAIN FIXTURE | 1 | |
| 956A1807 | FIXTURE - RESTRAINING -MIDSEAL - HPTR | 1 | |
| 956A1807G02 | Fixture,restraining-midseal,hptr | 1 | |
| 956A1810 | FIXTURE - RESTRAINING - FWD OUTER SEAL - ROTATING | 1 | |
| 956A1810G01 | Fixture, restraining, fwd outer seal - rotating | 1 | |
| 956A1811 | FIXTURE - RESTRAIN - AFT ROTATING AIR SEAL - HPTR | 1 | |
| 956A1811G02 | Fixture,restrain-aft rotating air seal,hptr | 1 | |
| 956A1816 | FIXTURE - INSTALL/REMOVE-HPT ROTOR - FWD SEAL | 1 | |
| 956A3006 | FIXTURE - INSTALL/ REMOVE-HPTR MIDSEAL | 1 | |
| 956A3006G01 | Fixture Install/Remove-Hptr Interstage Seal | 1 | |
| 956A3022 | FIXTURE - INSTALL/REMOVE- HPT ROTOR - FWD SEAL | 1 | |
| 956A3031 | FIXTURE - RTNR-NO 4 BRG INNER RACE/OIL SCOOP/ROTATING SEAL/FWD SEAL | 1 | |
| 956A3038G01 | Fixture,Inspection,Fwd ouier Seal | 1 | |
| 956A3041 | FIXTURE - CHILL-HPT ROTOR INTSTG SEAL/ STG 1 AFT RETAINER | 1 | |
| 956A3041G01 | Fixture chill hpt rotor interstage seal | 1 | |
| 956A3042 | FIXTURE - SEPARATION-HPTR MIDSEAL | 1 | |
| 956A3050 | FIXTURE - REMOVE - NO 4 CARBON SEAL RUNNER | 1 | |
| 956A3061 | FIXTURE - REMOVE - STATIONARY SEALS - B-SUMP | 1 | |
| 956A3061G01 | Fixture remove stationary seals b sump | 1 | |
| 956A3064G01 | Fixture, Installstationary Oil & Air Seals, Fwd | 1 | |
| 956A3065G02 | Fixture，install-carbon seal,No.4 | 1 | |
| 956A3078G01 | fixture remove hpt aft stationary seal | 1 | |
| 956A3078G02 | Fixture, Remove-Hpt Aft Stationary Seal | 1 | |
| 956A3079 | FIXTURE - REMOVAL - AFT SEAL - HPT ROTOR | 1 | |
| 956A3090 | FIXTURE - REMOVAL - STATIONARY SEAL - B SUMP | 1 | |
| 956A3090G01 | Fixture,removal-stationary seal,B sump | 1 | |
| 956A3093 | FIXTURE - LEAKAGE TEST - CARBON SEAL - NO. 4 BEARING | 1 | |
| 956A3093G01 | Fixture,leakage test-carbon seal No 4 bearing | 1 | |
| 956A3093G02 | Fixture,leakage test-carbon seal No 4 bearing | 1 | |
| 956A3093G03 | Fixture,leakage test-carbon seal No 4 bearing | 1 | |
| 956A3094 | FIXTURE - INSTALL / REMOVE - CARBON SEAL. NO. 4 | 1 | |
| 956A3094G02 | fixture install remove carbon seal no 4 bearing | 1 | |
| 956A3096 | FIXTURE - INSTALL - CARBON SEAL - NO 4 | 1 | |
| 956A3096G01 | Fixture,install-carbon seal No.4 | 1 | |
| 956A3502 | FIXTURE - TEST - NO. 3 CARBON SEAL | 1 | |
| 956A3502G01 | Fixture,test-carbon seal no 3 | 1 | |
| 956A3503 | FIXTURE - GUIDE - NO. 3 CARBON SEAL | 1 | |
| 956A3503G01 | Fixture guide-No 3 carbon seal | 1 | |
| 956A3503G02 | Fixture guide-No 3 carbon seal | 1 | |
| 956A3503G04 | Fixture guide-No 3 carbon seal | 1 | |
| 956A3504G01 | ffixture install remove seal rotating oil number 3 bearing | 1 | |
| 956A3700 | FIXTURE - LIFT - MIDSEAL | 1 | |
| 956A3727 | FIXTURE - INSTALLATION - HPT FWD OUTER SEAL | 1 | |
| 956A3727G02 | Fixture,installation-hpt fwd outer seal | 1 | |
| 956A3728 | FIXTURE - INSTALLATION - HPT STG1 RETAINER & MIDSEAL | 1 | |
| 956A3728G01 | Fixture, Installation - Hpt Stg 1 Aft Retainer & Mid Seal | 1 | |
| 956A3732 | FIXTURE - CHILL - HPT ROTOR AFT SEAL | 1 | |
| 956A3732G01 | Fixture, Chill - Hpt Rotor Aft Seal | 1 | |
| 956A3739G01 | Fixture,installation-hpt fwd outer seal | 1 | |
| 956A3805 | FIXTURE - RESTRAIN - AFT ROTATING OIL SEAL - NO 4 BRG | 1 | |
| 956A3805G01 | Fixture, Restrai-Aft Rotating Oil Seal,No 4 Brg | 1 | |
| 956A3807 | FIXTURE - RESTRAINING -MIDSEAL - HPTR | 1 | |
| 956A3807G02 | Fixture Restraining-Midseal Hptr | 1 | |
| 956A3811G01 | Fixture, Restrain - Aft Rotating Air Seal, Hptr | 1 | |
| 956A3825G01 | Fixture, Separation - Hptr Midseal | 1 | |
| 956A6058 | FIXTURE - BACKLASH CHECK - ABRADABLE SEAL | 1 | |
| 956A6058G01 | Fixture,backlash check-abradable seal | 1 | |
| 956A6058G03 | Fixture,backlash check-abradable seal | 1 | |
| 956A6154 | FIXTURE - INSTALL REAR SEAL SUPPORT - VBV DOOR | 1 | |
| 956A6154G02 | Fixture,install rear seal support-vbvdoor | 1 | |
| 956A6154G03 | Fixture,install rear seal support-vbvdoor | 1 | |
| 956A6304 | FIXTURE, RESTRAIN-ROTATING SEAL BEARING 4 | 1 | |
| 956A6304G01 | Fixture restrain rotating seal bearing 4 | 1 | |
| 956A6311 | FIXTURE - REMOVE - ROTATING SEAL BEARING 4 | 1 | |
| 956A6311G01 | Fixture remove rotating seal bearing 4 | 1 | |
| 956A6466 | FIXTURE - DISASSY-LPT SEAL RING STAGE 2-3 | 1 | |
| 956A6483 | FIXTURE - PUSHER - LPT RING -SEAL BEARING 5 | 1 | |
| 956A6483G02 | Fixture,pusher-lpt ring.seal-bearing 5 | 1 | |
| 956A6489 | FIXTURE - PULLER - LPT RING -SEAL REAR ENCLOSURE | 1 | |
| 956A6489G01 | Fixture,puller-lpt ring,seal rear enclosure | 1 | |
| 956A6490 | FIXTURE - REMOVE - LPT - RING SEAL | 1 | |
| 956A6490G02 | fixture remove lpt ring seal | 1 | |
| 956A6490G03 | fixture remove lpt ring seal | 1 | |
| 956A6490G04 | fixture remove lpt ring seal | 1 | |
| 956A6491 | FIXTURE - PULLER - LPT RING -SEAL BEARING 5 | 1 | |
| 956A6491G02 | Fixture puller lpt ring seal bearing 5 | 1 | |
| 956A6515G02 | Fixture，puller-lpt，disk 5/rotating seal ring | 1 | |
| 956A6575 | FIXTURE - RESTRAINER - SEALING RING | 1 | |
| 956A6604 | FIXTURE - HEATER - REAR SEAL NO.5 BEARING | 1 | |
| 956A6617 | FIXTURE, FLOW CHECK - CARBON SEAL NO.5 BEARING | 1 | |
| 956A6617G04 | Fixture,flow check-carbon seal | 1 | |
| 956A6619 | FIXTURE - CENTERING - CARBON SEAL NO.5 BEARING | 1 | |
| 956A6667G01 | Fixture,flow check-carbon seal | 1 | |
| 956A6812 | FIXTURE, CENTERING - FRONT ROTATING SEAL | 1 | |
| 956A6834 | FIXTURE ASSY/DIASSY - JOINT ROTATING SEAL | 1 | |
| 956A6834G01 | Fixture assy/diassy-joint rotating seal | 1 | |
| 956A8151 | FIXTURE - INSTALL - SEAL | 1 | |
| 956A8157 | FIXTURE - ASSY - TORQUING - VBV DOOR & REAR SEAL | 1 | |
| 956A8157G01 | Fixture,assy torquing vbv door and rear seal | 1 | |
| 956A8302G02 | Fixture remove lpt assy rotating seals | 1 | |
| 956A8320 | FIXTURE - REMOVE - RING SEAL | 1 | |
| 956A8320G01 | Fixture,remove-ring seal outillage dextraction anneau labyrinthe | 1 | |
| 956A8402 | FIXTURE - INSTALL/REMOVE - RING - SEAL-REAR ENCLOSURE | 1 | |
| 956A8402G01 | Fixture,install/remove-ring seal,rear enclosure | 1 | |
| 956A8402G02 | Fixture,install/remove-ring seal,rear enclosure | 1 | |
| 956A8402G03 | Fixture,install/remove-ring seal,rear enclosure | 1 | |
| 956A8403 | FIXTURE - INSTALL/REMOVE - RING - SEAL | 1 | |
| 956A8403G01 | Fixture,install/remove-ring,seal outillage | 1 | |
| 956A8403G02 | Fixture,install/remove-ring,seal outillage | 1 | |
| 956A8403G03 | Fixture,install/remove-ring,seal outillage | 1 | |
| 956A8432 | FIXTURE - DOG-CLUTCHING - RING - SEAL STG 2 | 1 | |
| 956A8501 | FIXTURE - RESTRAIN - SUPPORT - SEG RADIAL SEAL | 1 | |
| 956A8501G03 | Fixture,restrain-support.seg radial seal | 1 | |
| 956A8513 | FIXTURE - REMOVE - SUPPORT - SEG RADIAL SEAL | 1 | |
| 98A57004002000 | SEALING FIXTURE | 1 | |
| 98A57004002001 | FIXTURE - SEALING | 1 | |
| 995011 | SEALING STRAP AND SOLDE-RING FIXTURE | 1 | |
| 995063 | VACUUM SEAL FIXTURE; B/E AEROSPACE | 1 | |
| 9C1135 | FIXTURE, RUNOUT-CDP SEAL/HPTR | 1 | |
| 9C1135G07 | Fixture,run out-cdp seal/hpt rotor | 1 | |
| 9C1422 | FIXTURE, RESTRAINING-HPT FORWARD OUTER SEAL | 1 | |
| 9C1422G01 | Fixture,restraining -hpt forward outer seal | 1 | |
| 9C1425 | FIXTURE, RESTRAINING-FORWARD INNER SEAL | 1 | |
| 9C1425G02 | Fixture Restraining-Forward Inner Seal | 1 | |
| 9C1433 | FIXTURE, RESTRAINING-LPT STAGE 3 INTERSTAGE SEAL | 1 | |
| 9C1434 | FIXTURE, RESTRAINING-LPT STAGE 4 INTERSTAGE SEAL | 1 | |
| 9C1436 | FIXTURE, RESTRAINING-SEAL, PLT ROTOR STGE 2 | 1 | |
| 9C1437 | FIXTURE, RESTRAINING-LPT FORWARD SEAL SUPPORT | 1 | |
| 9C1437G01 | Fixture,restraining-lpt forward seal support | 1 | |
| 9C1438 | FIXTURE, RESTRAINING-LPT STAGE 5 INTERSTAGE SEAL | 1 | |
| 9C1441 | FIXTURE, RESTRAINING-NO 5 BRG OUTER ROTATING AIR SEAL | 1 | |
| 9C2324 | FIXTURE R/I SEAL ROT #1 BRG. | 1 | |
| 9C3060 | FIXTURE, RESTRAINING-LPT STAGE 6 INTERSTAGE SEAL | 1 | |
| 9C3063G01 | Fixture,restraining-lpt stg 1 noz trnsn duct seal support | 1 | |
| 9C3067 | SUPERSEDED BY G02FIXTURE, RESTRAINING-NO 3 BEARING, ROTATING SEAL | 1 | |
| 9C3070 | FIXTURE, RESTRAINING-HPT ROTOR FORWARD SEAL | 1 | |
| 9C3071 | FIXTURE, RESTRAINING-TRANSITION DUCT SEAL SUPPORT | 1 | |
| 9C3077G01 | Fixture,restraining-no 1 bearing stationary seal | 1 | |
| 9C3084 | FIXTURE, RESTRAINING-NO 5 BEARING SEAL HSG | 1 | |
| 9C3140G05 | Fixture,install-hp turb inner stg seal | 1 | |
| AGE70768 | CARBON SEAL ASSEMBLY FIXTURE | 1 | |
| C202-32-0711 | SEAL PRESS FIXTURE | 1 | |
| C27206 | FIXTURE,POSITIONING-TMF SEAL | 1 | |
| C27206G01 | FIXTURE,POSITIONING-TMF SEAL | 1 | |
| C32045-1 | Holding fixture, seal change, MLG (29) | 3 | |
| C32045-23 | Holding Fixture - Seal Change, Main Landing Gear | 5 | |
| C32045-63 | HOLDING FIXTURE - SEAL CHANGE, MAIN LANDING GEAR | 4 | |
| C32063-1 | HOLDING FIXTURE - SEAL CHANGE, MAIN LANDING GEAR | 1 | |
| GS13050-1 | FIXTURE, SEAL COMPRESSING | 1 | |
| GS13381 | FIXTURE SEAL COMPRESSI | 1 | |
| GS19468-1 | FIXTURE, SEAL COMPRESSION | 1 | |
| GS20023-1 | FIXTURE, CHEVRON SEAL | 1 | |
| H102021-5 | PRIMARY AIR INLET SEALING FIXTURE | 1 | |
| H102021-7 | SECONDARY AIR INLET SEALING FIXTURE | 1 | |
| H102076 | RAM AIR INLET SEALING FIXTURE | 1 | |
| H102103 | RAM AIR INLET SEALING FIXTURE | 1 | |
| HS7539 | FIXTURE-SEAL INSERTING | 2 | |
| IAE1J12812 | MOLDING FIXTURE IGV SEAL | 1 | |
| IAE2J12617 | FIXTURE - LPC IGV SEAL | 1 | |
| L-545 | FIXTURE SUPPORT HPC SPLIT STATOR CASE AND AIRSEAL SET BUILD AND TURN | 1 | |
| L-545149 | FIXTURE SUPPORT HPC SPLIT STATOR CASE AND AIRSEAL SET BUILD AND TURN | 1 | |
| LTCT7507-01 | Fixture, No. 2 Aft Seal Support | 1 | |
| NGT8T200 | FLANGE SEALING SURFACE LOCATION FIXTURE | 2 | |
| PWA 107723 | FIXTURE, SUPPORT – HPT 1ST STAGE AIR SEAL | 1 | |
| PWA 12812 | Fixture Compr.rear bearing seal air pressure tube | 1 | |
| PWA 16197 | FIXTURE NO.6 BEARING SEAL HOUSING | 1 | |
| PWA107391 | INDEXING FIXTURE (INLET CONE SEAL) | 1 | |
| PWA26112 | FIXTURE, LEAK TEST - #1 BRG SEAL ASSY_[PWA26112] | 2 | |
| PWA26113 | FIXTURE - #1 SEAL SUPPORT PRESSURE TEST_[PWA26113] | 1 | |
| PWA26436 | FIXTURE - MOLD, AIRSEALING RING | 2 | |
| PWA27906 | FIXTURE - NO.3 BRG FRT AIRSEAL RETNG NUT_[PWA27906] | 2 | |
| PWA27988 | FIXTURE - SEAL ASSY - NO.3 BRG, FRONT_[PWA27988] | 1 | |
| PWA27989 | FIXTURE, SEAL & HOLDER - #3 BRG REAR_[PWA27989] | 1 | |
| PWA29647 | FIXTURE - SEAL ASSEMBLY, N1 & 2 BEARING_[PWA29647] | 2 | |
| PWA75913 | FIXTURE - HOLDG NO4 BEARING SEAL SPACER_REPLACESPWA27491BYT.B87-067_[PWA75913] | 1 | |
| PWC38101 | FIXTURE, HOLDING, LOW PRESSURE VANE RING SEAL MACHINING | 3 | |
| PWC62294 | FIXTURE-BRUSH SEAL | 1 | |
| PWC62865 | Fixture Assy/Disassy Seal | 1 | |
| PWC67184 | Fixture Brush Seal Front | 1 | |
| RB6893737 | FIXTURE SELECTOR, REAR COMPRESSOR SEAL VENT ORIFICE | 2 | |
| RBE1X56-131-407 | Tool, Fixture, Seal Installation | 2 | |
| RRT058433-2 | Assembly fixture hp seal | 1 | |
| SWE84036 | FIXTURE DOME SEAL REPLACEMENT | 1 | |
| TES-3771 | SHAFT SEAL REMOVING FIXTURE | 1 | |
| TES-3772 | SHAFT SEAL INSTALLING FIXTURE | 1 | |
| TES-3774 | Fixture,Shaft Seal | 1 | |
| TES-3774PM | FIXTURE,SHAFT SEAL | 1 | |
| U0008 | Sealing Fixture Cockpit Sliding Windows | 1 | |
| WT-01962 | FIXTURE, VENT SEALING | 1 | |
| Z0107-944 | TEST FIXTURE FOR SEALING TEST | 1 | |
| lC6274 | FIXTURE SET, INSPECTION - LPT STATOR SEAL, STG. 2 | 1 | |
| lC6279 | FIXTURE SET, INSP. LPT STATOR SEAL, STAGE 4 TF39 ENG. | 1 | |
| lC6280 | FIXTURE , INSP. LPT STATOR SEAL, STG. 3 | 1 | |
| lC6282 | FIXTURE, INSP. LPT STATOR SEAL, STG. 6 | 1 | |
| lC628l | FIXTURE, INSP. LPT STATOR SEAL, STG. 5 | 1 | |
| C067-00-0431 | FLANGE SEALING SURFACE LOCATION FIXTURE | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
