| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| AGE-01410-401 | FIXTURE SE | 8 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 856A1818 | FIXTURE, SEATING, CK CORE | 2 | |
| 2024474-1 | CRIMP FIXTURE ASSEMBLY | 1 | |
| 2024481-1 | TORQUING FIXTURE ASSEMBLY | 1 | |
| H3275538CK1 | HOLDING FIXTURE (BASE) | 1 | |
| H3275538CK1-1 | HOLDING FIXTURE (BASE) | 1 | |
| H3275538CK1-2 | HOLDING FIXTURE (BASE) | 1 | |
| (CALIB) 2C5122P01 | FIXTURE, LPT ROTOR SEATING CHECK (CALIBRATION) | 1 | |
| (CALIB) 2C5186P01 | FIXTURE, HPT ROTOR SEATING CHECK (CALIBRATION) | 1 | |
| (CALIB) 98D27207508000 | GSE-FIXTURE VERTICAL STABILIZER/RUDDER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) IAE1J12514 | Setting Fixture (CALIBRATION) (CALIBRATION) | 1 | |
| 0061BE | FIXTURE, VERIFICATION TEST AOA SENSOR | 5 | |
| 0061CF | AOA SENSOR INSTALL FIXTURE | 2 | |
| 0061CG | FIXTURE, VERIFICATION TEST AOA SENSOR | 1 | |
| 0061R41613 | UNIVERSAL VIDEO TEST FIXTURE (UVTF) / COMERCIALIZADO POR V59885 (ROSEMOUNT) | 1 | |
| 0061R50003 | HINGE ASSEMBLY PIN PRESS FIXTURE | 1 | |
| 011-01085-01 | GSM 85 SLIP-CLUTCH SET FIXTURE | 1 | |
| 0110E102450-18 | FIXTURE, HOLDING ASSEMBLY | 1 | |
| 067-00-0431 | FLANGE SEALING SURFACE LOCATION FIXTURE | 1 | |
| 0S21976 | FIXTURE-SETTING | 1 | |
| 0S22309A | SETTING FIXTURE | 1 | |
| 0T900-0239 | TRACK SETTING FIXTURE | 1 | |
| 0T900-0247 | SEAT TRACK SETTING FIXTURE ASSEMBLY | 5 | |
| 0T900-0309 | SETTING FIXTURE | 1 | |
| 0T900-0311 | TRACK SETTING FIXTURE | 1 | |
| 0T900-0517 | SEAT FIXTURE | 1 | |
| 0T900-0518 | SEAT FIXTURE | 1 | |
| 0T900-052Y | TRACK SETTING FIXTURE | 1 | |
| 0T900-0542 | TEST FIXTURE CO-PILOT SEAT | 1 | |
| 0T900-0845 | SEAT FIXTURE | 2 | |
| 0T900-0846 | SEAT FIXTURE | 2 | |
| 0T900-0927 | TRACK SETTING FIXTURE | 2 | |
| 0T900-5155 | HORIZONTAL ACTUATOR SETTING FIXTURE | 1 | |
| 0T9000247 | FIXTURE TRACK SETTING | 5 | |
| 0U146627 | ASSEMBLY FIXTURE | 1 | |
| 0U147264 | SERVO CONTROL HANDLING FIXTURE | 1 | |
| 0U148017 | ASSEMBLY FIXTURE | 1 | |
| 10-100 | FIXED STRUCUTRE ASSEMBLY DRILL FIXTURE, DETAIL | 1 | |
| 10-101 | FIXED STRUCUTRE ASSEMBLY DRILL FIXTURE, DETAIL | 1 | |
| 100-47823 | STATIONARY SEAL INSTALLATION FIXTURE | 1 | |
| 100-49289 | Pump Assembly Fixture | 1 | |
| 100-49335 | ASSEMBLY FIXTURE | 1 | |
| 100-51125 | PUMP ASSEMBLY FIXTURE | 1 | |
| 100-51125 | Pump Assembly Fixture | 1 | |
| 100-51529 | MAIN ASSEMBLY FIXTURE | 1 | |
| 100-51960 | Pump Assembly Fixture | 1 | |
| 10013677-S5 7-2 | REGULATOR ASSEMBLY FIXTURE | 1 | |
| 10013677-S57-2 | ASSEMBLY FIXTURE | 1 | |
| 1007291-1 | ASSEMBLY - FIXTURE, HANDLING | 1 | |
| 1007291-2 | ASSEMBLY - FIXTURE, HANDLING | 3 | |
| 10260-BASE | HOLDING FIXTURE ASSEMBLY DISSESAMBLY (2IT) | 1 | |
| 105-14181W1 | NEEDLE BEARINGS ASSEMBLY FIXTURE | 1 | |
| 105-31501W5 | ASSEMBLY/DISASSEMBLY FIXTURE | 1 | |
| 107233 | Assembly Fixture | 1 | |
| 107233 PM | ASSEMBLY FIXTURE | 1 | |
| 10C1001 | FIXTURE - LIFT-ADJUSTABLE CG GENERAL PURPOSE | 1 | |
| 10C1001G04 | FIXTURE, LIFT - ADJUSTABLE CG, GENERAL PURPOSE (LIFT FIXTURE) (RECOMMENDED) | 1 | |
| 10C1072G01 | FIXTURE, DISASSEMBLY - HPT ROTOR/COMPRESSOR ROTOR (DISASSEMBLY FIXTURE) (SUPERSEDED BY 10C1072G02) | 1 | |
| 10C1072G02 | FIXTURE, DISASSEMBLY - HPT ROTOR/COMPRESSOR ROTOR (DISASSEMBLY FIXTURE) (SUPERSEDES 10C1072G01) | 1 | |
| 10C1077 | FIXTURE - LIFT-HPC STATOR CASE - F | 1 | |
| 10C1077G01 | UPPER CASE LIFT FIXTURE (CF34-10E) | 1 | |
| 10C1087G01 | FIXTURE, PULLER - NO. 5 BEARING AIR/OIL SEPARATOR (PULLER FIXTURE) | 1 | |
| 10C1103G01 | FIXTURE, CLAMPING - NO. 3 BEARING ASSEMBLY, INLET GEARBOX (CLAMPING FIXTURE) | 1 | |
| 10C1120G01 | FIXTURE, INSTALL/REMOVE - NO. 5 BEARING RETAINING NUT (INSTALL/REMOVE FIXTURE) (SUPERSEDED BY 10C1120G02) | 1 | |
| 10C1120G02 | FIXTURE, INSTALL/REMOVE - NO. 5 BEARING RETAINING NUT (INSTALL/REMOVE FIXTURE) (SUPERSEDES 10C1120G01) | 1 | |
| 10C1121G01 | FIXTURE, RESTRAIN - HPT NOZZLE ASSEMBLY (RESTRAIN FIXTURE) | 1 | |
| 10C1155 | FIXTURE, SEATING CHECK - CORE | 1 | |
| 10C1155G02 | FIXTURE, SEATING CHECK - CORE MODULE TO INLET GEAR BOX (SEATING CHECK FIXTURE) (RECOMMENDED) | 1 | |
| 10C1169G01 | FIXTURE, ASSEMBLY/DISASSEMBLY - HPT NOZZLE, STAGE 1 (FIXTURE) (SUPERSEDED BY 10C1169G02) | 1 | |
| 10C1169G02 | FIXTURE, ASSEMBLY/DISASSEMBLY - HPT NOZZLE STAGE 1 (FIXTURE) (SUPERSEDES 10C1169G01) | 1 | |
| 10C1218 | FIXTURE - PULLER - HP TURB AFT AIR SEAL | 1 | |
| 10C1218G01 | FIXTURE, PULLER - HPT AFT AIR SEAL (AFT AIR SEAL PULLER FIXTURE) | 1 | |
| 10C1218G02 | FIXTURE, PULLER - HPT AFT AIR SEAL (PULLER FIXTURE) (HIGHER REMOVAL FORCE FOR THE AFT AIR SEAL 2044M65P03) | 1 | |
| 10C1222 | FIXTURE - I/R - AIR/OIL SEPARAT | 1 | |
| 10C1222G01 | FIXTURE, INSTALL/REMOVE - AIR/OIL SEPARATOR NUT | 1 | |
| 10C1276G01 | ASSEMBLY, PRESEAT - VARIABLE STATOR VANE ACTUATION ARMS (PRESEAT FIXTURE) | 1 | |
| 10C1281G01 | FIXTURE, PRE-SET | 1 | |
| 10C1344 | FIXTURE, PULLER- NO 5 BEARING AIR/OIL SEPARATOR | 1 | |
| 10C2043G02 | FIXTURE, HANDLING LPTM (LPT MODULE HANDLING FIXTURE) (SUPERSEDED BY 10C2043G04) | 1 | |
| 10C2043G04 | FIXTURE, HANDLING LPTM (LPT MODULE HANDLING FIXTURE) (SUPERSEDES 10C2043G02) | 1 | |
| 10C2149 | OMNI SEAL INST FIXTURE | 1 | |
| 11-10830 | AIR SEALING FIXTURE | 1 | |
| 1106469 | PRESSURE SEAL INSTALLATION/ REMOVAL FIXTURE | 1 | |
| 1106469-1 | Assembly Fixture | 1 | |
| 1106569-2 | Pressure Seal Remover Fixture | 1 | |
| 114-212-1 | Pressure Plate Assembly Fixture | 1 | |
| 114-212-2 | Pressure Plate Assembly Fixture | 1 | |
| 114-212-3 | Pressure Plate Assembly Fixture | 1 | |
| 114-227 | SEAL INSPECTION FIXTURE | 1 | |
| 114-253 | FIXTURE FOR ASSEMBLY OF TIRE WHEEL | 1 | |
| 114-432 | SEAL INSPECTION FIXTURE | 1 | |
| 114-441 | GREASE SEAL EXAMINATION FIXTURE | 5 | |
| 114-759-1 | SEAL INSPECTION FIXTURE 1 | 1 | |
| 114-759-2 | SEAL INSPECTION FIXTURE 2 | 1 | |
| 117-12010W60 | SPANNER SOCKET INSERT (FOR FIXTURE TOOL 105-31501 W5) | 1 | |
| 11C3001 | FIXTURE - MACHINING FAN CASE | 1 | |
| 11C3001G03 | FIXTURE-FAN CASE SHROUD MACHINING (ALT SPL-13736) | 1 | |
| 11C3001G07 | FIXTURE, MACHINING FAN CASE SHROUD | 1 | |
| 11C3004P02 | FIXTURE, SHIPPING - FAN STATOR CASE MODULE, HYDRAULIC (DELUXE) | 1 | |
| 11C3006 | FIXTURE - INSTALL/REMOVE-HP TURB RTR INNER STG SEAL | 1 | |
| 11C3009 | FIXTURE - SUPPORT - HPC ROTOR ASSEMBLY (GENSPECT) | 1 | |
| 11C3009G01 | FIXTURE, SUPPORT - HPC ROTOR ASSEMBLY (GENSPECT) | 1 | |
| 11C3024 | FIXTURE - ASSEMBLY/DISASSEMBLY - HPT ROTOR | 1 | |
| 11C3042 | FIXTURE - CHILL - INTERSTAGE SEAL | 1 | |
| 11C3052 | FIXTURE - RESTRAINT-DIFFUSER | 1 | |
| 11C3063 | FIXTURE - CHIL-STATIONARY SEAL & IGV SHROUD | 1 | |
| 11C3063G01 | FIXTURE, CHILL - STATIONARY SEAL AND IGV SHROUD | 1 | |
| 11C3065 | FIXTURE - REMOVAL-HPTR AFT SEAL | 1 | |
| 11C3076 | FIXTURE - RMV/INST CMBSTR DIFFUSER NOZ STG 1 HPT NOZ SEAL | 1 | |
| 11C3079 | FIXTURE - LIFT-STG 10 OUTLET GUIDE VANE ASSEMBLY | 1 | |
| 11C3081 | FIXTURE, BUILD UP- STG 1 HP TURB NOZZLE ASSEMBLY | 1 | |
| 11C3094 | FIXTURE - SEATING - CHECK-NO 2 BEARING | 1 | |
| 11C3094G02 | FIXTURE, SEATING, CHECK - NO. 2 BEARING | 1 | |
| 11C3143 | FIXTURE, INSTALL-STG 1 HANGER/SUPPORT HPT STATOR CASE | 1 | |
| 11C3147 | FIXTURE - RUN OUT-CDP SEAL/HPT ROTOR | 1 | |
| 11C3166 | FIXTURE, I/R - SEAL ROTATING, NO. 1 BRG | 1 | |
| 11C3199 | FIXTURE - ASSEMBLY LIFT & TURN-FAN STATOR CASE - AFT | 1 | |
| 11C3317 | FIXTURE - SEPARATE-HPC MODULE FROM FAN FRAME | 1 | |
| 11C3321 | FIXTURE - REMOVAL-STAGE 2 HPT SHROUD/HANGER SUB-ASSEMBLY | 1 | |
| 11C3354 | FIXTURE - INSTALL/REMOVE - HPT INTERSTAGE SEAL | 1 | |
| 11C3406 | FIXTURE, RUNOUT MEASUREMENT-FAN CASE | 1 | |
| 11C3406G04 | FIXTURE-FAN CASE RUN OUT MEASUREMENT (ALTSPL-8372) | 1 | |
| 11C3406G05 | FIXTURE, RUNOUT MEASUREMENT-FAN CASE | 1 | |
| 11C3411 | FIXTURE - INSTALL-CARBON SEAL - NO. 1 BRG | 1 | |
| 11C3428 | FIXTURE - TEST-CARBON SEAL - NO. 1 BRG | 1 | |
| 11C3437 | FIXTURE, REMOVAL - SEAL, LPT AFT | 1 | |
| 11C3439 | FIXTURE - PROTECTOR/INSTALLATION-NOZZLE COVER - FWD OUTER SEAL | 1 | |
| 11C3440 | FIXTURE - PUSHER/PULL CARBON SEAL NO 1 BRG | 1 | |
| 11C3480 | FIXTURE - LIFT/TURN -HP COMPR ROTOR ASSEMBLY | 1 | |
| 11C3484 | FIXTURE - INSPECT/RESTRAIN HPTR AFT SEAL | 1 | |
| 11C3487 | FIXTURE - INSPECTION-SEAL - SUMP-HPT ROTOR | 1 | |
| 11C3490 | FIXTURE - INSPECTION/MACHINING RESTRAIN-HP TURB CASE | 1 | |
| 11C3499 | FIXTURE - INSPECT RESTRAIN-LPT FWD SEALS | 1 | |
| 11C3512 | FIXTURE - GUIDE VERTICAL - TRF ASSEMBLY | 1 | |
| 11C3590 | FIXTURE - RUNOUT-LPT BRUSH SEAL (ENGLISH) (USA) | 1 | |
| 11C3921 | TOOL SET - SHIPPING FIXTURE IGB | 1 | |
| 11C4206 | FIXTURE - RESTRAINING - HP TURBINE FORWARD OUTER SEAL | 1 | |
| 11C4215 | FIXTURE - RESTRAINING SEAL AIR/OIL ROT NO 4 BRG | 1 | |
| 11C4219 | FIXTURE - RESTRAINING-CDN CASE | 1 | |
| 11C4232 | FIXTURE - RESTRAINING-SEAL - STATIONARY INNER FWD NO 5 BEARING | 1 | |
| 11C4246 | FIXTURE - REMOVAL - CASE HP COMPR. FORWARD LOWER | 1 | |
| 11C4246G03 | FIXTURE, REMOVAL-CASE, HPC, FORWARD, LOWER | 1 | |
| 11C4247 | FIXTURE - RESTRAINING RING MATING SEAL ROT NO 5 BRG | 1 | |
| 11C4249 | FIXTURE - START & RUN TCF SEAL RUNS (SOURCE CTRL-RHINESTAHL) | 1 | |
| 11C4256 | FIXTURE - SEATING-FAN SHAFT SPEED SENSOR | 1 | |
| 11C4256G02 | FIXTURE, SEATING - FAN SHAFT SPEED SENSOR | 1 | |
| 11C4257 | FIXTURE - SEATING-NO 2 BEARING INNER RACE | 1 | |
| 11C4257G01 | FIXTURE, SEATING - NO. 2 BEARING INNER RACE | 1 | |
| 11C4258 | FIXTURE - SEATING-NO 1 BEARING - RLR - CYL - INNER RACE | 1 | |
| 11C4258G01 | SEATING FIXTURE, NO. 1 ROLLER BEARING, INNER RACE | 1 | |
| 11C4259 | FIXTURE - SEATING-FAN SHAFT EXTENSION | 1 | |
| 11C4259G01 | FIXTURE, SEATING - FAN SHAFT EXTENSION | 1 | |
| 11C4292 | FIXTURE - INSTALLATION-EXPANSION - NO 5 BRG CARBON SEAL | 1 | |
| 11C4307G03 | FIXTURE - RUNOUT MEASUREMENT, FAN CASE | 1 | |
| 11C4307G04 | FIXTURE，RUNOUT MEASUREMENT-FAN CASE | 1 | |
| 11C4376 | FIXTURE, BRACKET SET, FAN HUB FRAME | 1 | |
| 11C4434 | FIXTURE, REMOVAL - SEAL, LPT AFT | 1 | |
| 11C4439 | FIXTURE - LIFT & TURN - AFT FAN STATOR CASE ASSY | 1 | |
| 11C4490P02 | FAN STATOR SEPERATION FIXTURE GENX-1B | 1 | |
| 11C4509 | FIXTURE - AIR TUBE INSERT-HYD | 1 | |
| 11C4523 | DISASSEMBLY FIXTURE-STAGE 5 RING | 1 | |
| 11C4523G01 | FIXTURE, DISASSEMBLY - STAGE 5 RING RETAINER | 1 | |
| 11C4525 | FIXTURE - TORQUE-CDP SEAL JOINT | 1 | |
| 11C4562 | FIXTURE - INSTALLATION - INTERSTAGE SEAL - HPTR | 1 | |
| 11C4563 | FIXTURE - SEPARATION- INTERSTAGE SEAL / BLADE RETAINER HPTR | 1 | |
| 11C4572P01 | FIXTURE, SHIPPING - FAN STATOR CASE MODULE, TWO CRANE TIPPABLE | 1 | |
| 11C4588P01 | FIXTURE-SHIPPING, FAN STATOR CASE MODULE | 1 | |
| 11C4589 | FIXTURE - REMOVAL-AFT EXTENSION CASE | 1 | |
| 11C4594G02 | FIXTURE, FAN BLADE TRANSPORTION CAROUSEL | 1 | |
| 11C4623 | FIXTURE - CLAMP-STG 10 OGV SEALING RING | 1 | |
| 11C4658 | FIXTURE, I/R - HPT INTERSTAGE STAGE SEAL | 1 | |
| 11C4664 | FIXTURE - RAISE/LOWER ACCESORY GEAR BOX MODULE | 1 | |
| 11C4687 | FIXTURE, REMOVE - CDP SEAL AND STAGE 6-10 SP JOINT | 1 | |
| 11C4687G01 | FIXTURE, REMOVE - CDP SEAL AND STAGE 6-10 SP JOINT | 1 | |
| 11C4702 | ASSEMBLY FIXTURE | 1 | |
| 11C4729 | FIXTURE, PRESS - SEAL | 1 | |
| 11C4800 | FIXTURE, DISASSEMBLY - HPT ROTOR/HPC ROTOR | 1 | |
| 11C4882G01 | FIXTURE, LIFT/TURN - HPC ROTOR ASSEMBLY/FORWARD SHAFT, FORWARD END | 1 | |
| 11C4888 | FIXTURE - TORQUE-CDP SEAL JOINT | 1 | |
| 12-811538-106 | ASSEMBLY AND WELD FIXTURE | 1 | |
| 13-0543 | FIXTURE-FUSE,TEST | 1 | |
| 135349 | SPA HANDLING FIXTURE ASSEMBLY | 1 | |
| 139W00-113-00 | DRILL FIXTURE FOR SEAT BEAM | 1 | |
| 14-6896-6000 | HOLDING FIXTURE (CONSISTS OF HOLDING FIXTURE, STOP PLATE AND INSERT) | 3 | |
| 1503-501 | FIXTURE, ASSEMBLY | 1 | |
| 150–035493–001 | SLTA HANDLING FIXTURE ASSEMBLY, SMALL | 1 | |
| 1525-519 | FIXTURE, TARGET, PROXIMITY SENSOR | 1 | |
| 1544320AT2-1001 | ASSEMBLY FIXTURE | 1 | |
| 1591782-1 | Assembly Fixture | 1 | |
| 1610000F1 | ASSEMBLY FIXTURE | 1 | |
| 16A1403-3 | TEST FIXTURE ASSEMBLY | 1 | |
| 170-62060-80 2-38H 1 | FIXTURE NEUTRAL SETTING RH ELEVATOR | 8 | |
| 170-62060-801-38H1 | NEUTRAL SETTING FIXTURE, LEFT-HAND, ELEVATOR | 8 | |
| 170-62060-801-38H1 | FIXTURE, NEUTRAL SETT. LH ELEV | 8 | |
| 170-62060-802-38H1 | NEUTRAL SETTING FIXTURE, RIGHT-HAND, ELEVATOR | 8 | |
| 170-6206080138H1 | NEUTRAL SETTING FIXTURE,LEFT-HAND,ELEVATOR | 8 | |
| 170-6206080238H1 | NEUTRAL SETTING FIXTURE,RIGHT-HAND,ELEVATOR | 8 | |
| 1778300 | ASSEMBLY FIXTURE | 1 | |
| 179-402 | FIXTURE, TIRE AND WHEEL ASSEMBLY | 1 | |
| 18C1013 | FIXTURE, REMOVE - HPT AFT SEAL | 1 | |
| 18C1019 | FIXTURE, REMOVE - NO. 4 BRG. & SEALS | 1 | |
| 18C1037 | ASSEMBLY FIXTURES:ASSEMBLY & INSPECTION FIXTURE | 1 | |
| 18C1058 | FIXTURE, GUIDE - STG 2 SUBASSEMBLY, HPTR | 1 | |
| 18C1062 | FIXTURE, REMOVE - M10 SEAL | 1 | |
| 18C1113 | FIXTURE, SEPARATOR HPCR | 1 | |
| 18C1120 | FIXTURE, LIFT - HPCR ASSEMBLY | 1 | |
| 18C1126 | FIXTURE, LIFT - HPC ASSEMBLY, HORIZONTAL | 1 | |
| 18C1143 | ASSEMBLY:STACKING FIXTURE | 1 | |
| 18C1179 | ASSEMBLY FIXTURES:ASSY | 1 | |
| 18C1233 | FIXTURE, INSTALL - STG 1 HANGER/SUPPORT STATOR CASE - MANUAL | 1 | |
| 18C1310 | FIXTURE,CG-FAN CASE | 1 | |
| 18C1423 | FIXTURE, GUIDE LP TURBINE CASE | 1 | |
| 18C1503 | ASSEMBLY FIXTURES:ASSY | 1 | |
| 18C1519 | ASSEMBLY FIXTURES:ASSY | 1 | |
| 18C8404 | ASSEMBLY FIXTURES:ASSY | 1 | |
| 1900127 | MOTOR ASSEMBLY FIXTURE | 1 | |
| 1900127-1 | MOTOR ASSEMBLY FIXTURE | 1 | |
| 1900195 | MOTOR ASSEMBLY FIXTURE | 1 | |
| 1900196 | MOTOR/GENERATOR ASSEMBLY FIXTURE | 1 | |
| 1900541 | STATOR ASSEMBLY FIXTURE | 1 | |
| 1900896 | BEARING INSERTION FIXTURE | 1 | |
| 190147-1 | FLEX SHAFT ASSEMBLY TEST FIXTURE | 1 | |
| 1A258-0505 | ACTUATOR SETTING FIXTURE | 1 | |
| 1C5635G01 | LIFT FIXTURE - LOW PRESSURE TURBINE STATOR CASE | 1 | |
| 1C6147 | FIXTURE SET, REPAIR - PT ROTOR BLADES | 1 | |
| 1C6172 | FIXTURE; RAIL SETS | 1 | |
| 1C6193 | FIXTURE SET, MACHINING - FRONT COMPRESSOR STATOR | 1 | |
| 1C6193 REV B | FIXTURE SET, MACHINING - FRONT COMPRESSOR STATOR | 1 | |
| 1C6208 | FIXTURE SET | 1 | |
| 1C6208G01 | FIXTURE SET | 1 | |
| 1C6274 | FIXTURE SET, INSPECTION - LPT STATOR SEAL, STG. 2 | 1 | |
| 1C6274 REV B | FIXTURE SET, INSPECTION - LPT STATOR SEAL, STG. 2 | 1 | |
| 1C6276 | STAGE 4, SEAL HOLDING FIXTURE | 1 | |
| 1C6277 | STAGE 5, SEAL HOLDING FIXTURE | 1 | |
| 1C6278 | STAGE 6, SEAL HOLDING FIXTURE | 1 | |
| 1C6279 | FIXTURE SET, INSP LPT STATOR SEAL STG 4 TF39 ENG | 1 | |
| 1C6279 REV B | FIXTURE SET, INSP. LPT STATOR SEAL, STAGE 4 TF39 ENG. | 1 | |
| 1C6280 | FIXTURE , INSP. LPT STATOR SEAL, STG. 3 | 1 | |
| 1C6280 REV C | FIXTURE , INSP. LPT STATOR SEAL, STG. 3 | 1 | |
| 1C6281 | FIXTURE, INSP. LPT STATOR SEAL, STG. 5 | 1 | |
| 1C6281 REV C | FIXTURE, INSP. LPT STATOR SEAL, STG. 5 | 1 | |
| 1C6282 | FIXTURE, INSP. LPT STATOR SEAL, STG. 6 | 1 | |
| 1C6282 REV B | FIXTURE, INSP. LPT STATOR SEAL, STG. 6 | 1 | |
| 1C6284 | FIXTURE SET, REPAIR - PT INTERSTAGE SEAL, STAGES 2-6 | 1 | |
| 1C6923 | FIXTURE SET, MASKING - PT ROTOR SHAFT | 1 | |
| 1C6955 | FIXTURE, LIFT-POWER TURBINE ASSEMBLY | 1 | |
| 1C6955G03 | Fixture, Lift - Power Turbine Assembly | 1 | |
| 1C8031G05 | Fixture, Hinge - Upper Compressor Case | 1 | |
| 1C8032G01 | Fixture, Hinge - Low Pressure Turbine Stator Case | 1 | |
| 1C8032G03 | FIXTURE, HINGE - LOW PRESSURE TURBINE STATOR CASE | 1 | |
| 1C8039 | FIXTURE, RAISE & SUPPORT- UPPER COMPRESSOR CASE | 1 | |
| 1C8039G02 | Fixture, Raise and Support - Upper Compressor Case | 1 | |
| 1C8039G03 | FIXTURE, RAISE AND SUPPORT - UPPER COMPRESSOR CASE | 1 | |
| 1C8042 | FIXTURE - RAISE UPPER CASE | 1 | |
| 1C8042G01 | Lift Fixture - Power Turbine Stator Case | 1 | |
| 1C8065G01 | FIXTURE ASSEMBLY - ALIGNMENT NO. 5 AND NO. 6 BEARING | 1 | |
| 1C8114 | FIXTURE - CASE ROTATE | 1 | |
| 1C8124G01 | FIXTURE,ASSEMBLY/DISASSEMBLY | 1 | |
| 1C8161 | FIXTURE, ASSY HP TURB. INTERSTAGE SEAL | 1 | |
| 1C8161 REV C | FIXTURE, ASSY HP TURB. INTERSTAGE SEAL | 1 | |
| 1C8182 | FIXTURE SET - REMOVAL MATING SEAL | 2 | |
| 1C8182 REV B | FIXTURE SET - REMOVAL MATING SEAL | 1 | |
| 1C8182G01 | Fixture set, Mating Seal Removal | 1 | |
| 1C8183 | FIXTURE - TORQUE MEASURING - VSV ASSEMBLY | 1 | |
| 1C8186 | FIXTURE, LEFT LP TURB CASE | 1 | |
| 1C8186 REV D | FIXTURE, LEFT LP TURB CASE | 1 | |
| 1C8210 | FIXTURE, SETTING - ACTUATION SYSTEM | 1 | |
| 1C8210G01 | FIXTURE, SETTING- ACTUATION SYSTEM | 1 | |
| 1C8215G01 | FIXTURE, ASSEMBLY-HP TURBINE NOZZLE | 1 | |
| 1C8322 | FIXTURE,LIFT-LPC CASE HORIZONA | 1 | |
| 1C8343 | FIXTURE SET, TOP HALVING- HP COMPR STATOR CASE | 1 | |
| 1C8343G01 | Fixture Set, Top Halving - HP Compressor Stator Case | 1 | |
| 1C8348 | FIXTURE - GRIND-COMPR CASE | 1 | |
| 1C8350 | FIXTURE, LIFT- COMPRESSOR STATOR CASE, UPPER | 1 | |
| 1C8353G01 | LIFT FIXTURE - HPC STATOR CASE | 1 | |
| 1C8400 | FIXTURE, SETTING-ACTUATOR, VARIABLE STATOR VANE/IG | 1 | |
| 1C8400G01 | FIXTURE, SETTING-ACTUATOR, VSV/IGV | 1 | |
| 1C8400G02 | Fixture, Setting - Actuator, Variable Stator Vane/IGV | 1 | |
| 1C8412G01 | FIXTURE, TORQUE MEASURING - VSV ASSEMBLY | 1 | |
| 1C8481 | FIXTURE, LIFTING GG/GT LM2500 SERIES | 1 | |
| 1C9029G01 | FIXTURE, CONC -NO. 5 AND 7 BR.SEALS | 1 | |
| 1C9300G01 | FIXTURE BHGE 1C9300G01FOR LIFTING AIR COLLECTOR USED IN WP 2310 00 SPECIAL TOOL (LIFTING TOOL) FOR REPLACEMENT FRONT FRAME AIR COLLECTOR | 1 | |
| 1C9311G02 | FIXTURE, SEAT CHECK - COUPLING NUT, SHAFT,LPT ROTOR | 1 | |
| 1C9336G01 | FIXTURE, ASSEMBLY, INSTALL / REMOVE - AFT DRIVE SHAFT NUT | 1 | |
| 1C9355 | FIXTURE, ASSEMBLY IMPINGEMENT - NO.1 BRG OIL NOZZL | 1 | |
| 1C9390G01 | FIXTURE ASSEMBLY, LIFT & TURN VIGV | 1 | |
| 1C9400 | FIXTURE SET, RAISE & HINGE- UPPER COMPR CASE | 1 | |
| 1C9400G01 | Fixture set raise and hinge upper compressor case | 1 | |
| 1C9403 | FIXTURE, SETTING- ACTUATOR, VARIABLE STATOR VANE/I | 1 | |
| 1C9403G01 | FIXTURE, SETTING-ACTUATOR, VSV/IGV | 1 | |
| 1C9408 | FIXTURE, TORQUE MEASURING- VSV ASSEMBLY | 1 | |
| 1C9408G02 | Fixture, Torque Measuring - VSV Assembly | 1 | |
| 1C9422 | FIXTURE - INSTALL/REMOVE CRF AFT CASE | 1 | |
| 1C9422G02 | Fixture, Installation/Removal - CRF Aft Case | 1 | |
| 1C9602G01 | FIXTURE, LIFT - LPC CASE, STAGES 0-3 | 1 | |
| 1C9608 | FIXTURE, INSTALL/REMOVE - HP TURB MODULE ASSEMBLY | 1 | |
| 1C9616 | FIXTURE - SEAT CHECK-COUPLING NUT | 1 | |
| 1C9616G01 | Fixture, Seat Check - Coupling Nut, Shaft | 1 | |
| 1C9621G01 | FIXTURE, SUPPORT BHGE 1C9621G01 USED IN WP 1510 00 SPECIAL TOOL FOR GAS FUEL SYSTEM REPLACEMENT | 1 | |
| 1C9642 | FIXTURE - LIFT / INSTALL - SPACER SEAL AFT | 1 | |
| 1J12444 | Fixture, Setting | 1 | |
| 1J12513 | Setting Fixture | 1 | |
| 1J12584 | Fixture, Setting | 1 | |
| 1T900-0107 | SETTING FIXTURE | 2 | |
| 1T900-5155 | HORIZONTAL ACTUATOR SETTING FIXTURE | 1 | |
| 1X46169987 | ASSEMBLY FIXTURE | 1 | |
| 1X54170010 | ASSEMBLY FIXTURE | 1 | |
| 1X56131407 | FIXTURE SEAL INSTALLATION | 1 | |
| 1X56131407/PHP | FIXTURE SEAL INSTALLATION 1X56131407EQUAL | 1 | |
| 1X56170003 | ASSEMBLY FIXTURE | 1 | |
| 2-11057 | SPRING RETURN ASSEMBLY FIXTURE | 1 | |
| 2024151-1 | SEAL PRESS FIXTURE | 1 | |
| 215847 | SHAFT ASSEMBLY FIXTURE | 1 | |
| 216564 | ASSY FIXTURE, SHAFT SEAL | 1 | |
| 2024067 | Fixture-Press Seal And Shim | 1 | |
| 2024067-1 | Seal Press Fixture | 1 | |
| 2024186-1 | Pin Fixture Assembly | 1 | |
| 2024229 | Fixture-Assembly | 1 | |
| 2024370-1 | Seal Press Fixture | 1 | |
| 2024473-1 | DRILL FIXTURE ASSEMBLY | 1 | |
| 2024474-1 | CRIMP FIXTURE ASSEMBLY | 1 | |
| 2024475-1 | BACKLASH CHECKING FIXTURE ASSEMBLY | 1 | |
| 2024481-1 | TORQUING FIXTURE ASSEMBLY | 1 | |
| 2024593-1 | LEAKAGE TEST FIXTURE SET | 1 | |
| 2024639-1 | Valve test fixture assembly | 1 | |
| 2024649-1 | Seal Installer Fixture | 1 | |
| 2024821-1 | FIXTURE TEST, BEARING SEAL | 1 | |
| 2024822-1 | FIXTURE, TEST, PRESSURE SENSOR | 1 | |
| 2024958-1 | Assembly Fixture | 1 | |
| 2024973-1 | FILTER FIXTURE ASSEMBLY | 1 | |
| 2025064-1 | FIXTURE, TEST, PRESSURE SENSOR | 1 | |
| 2025261-1 | BEARING REMOVAL FIXTURE (REMOVES 3617585-001 COMPRESSOR BEARING FROM 3810127-1 BEARING HOUSING ASSEMBLY AND 3822055-1 COUPLING SHAFT) | 1 | |
| 2025613-1 | FIXTURE ASSEMBLY RIVET | 1 | |
| 2025659-1 | Valve Test Fixture Assembly | 1 | |
| 2025660-1 | VALVE TEST FIXTURE ASSEMBLY (2IT) | 1 | |
| 211945-0 | PACKING FIXTURE WITH BANDING BOARD (USED | 1 | |
| 211946-0 | PACKING FIXTURE WITH BANDING BOARD (USED | 1 | |
| 2128M93 | THE CARBON SEAL REPLACEMENT FIXTURE | 1 | |
| 2189005F1 | Assembly And Stroke Set Fixture | 1 | |
| 21C11423G01 | FIXTURE ASSEMBLY STAGE 1 FAN BLADE | 1 | |
| 21C7090G02 | SET, COMPRESSOR STATOR MEASUREMENT FIXTURES (CONSISTING OF) | 1 | |
| 21C7092G02 | SET, COMPRESSOR STATOR LANDS/VANES GRINDING FIXTURES (CONSITING OF) | 1 | |
| 21C7098G02 | COMPRESSOR ROTOR MEASUREMENT FIXTURES SET | 1 | |
| 21C7237G01 | GRINDING FIXTURE, COMPRESSOR DISCHARGE ROTATING SEAL | 1 | |
| 21C7406P01 | FIXTURE, HOLDINGSEAL | 1 | |
| 21C7701G01 | FIXTURE, ASSEMBLY | 1 | |
| 21C7786G01 | FIXTURE REVERSE FLUSH | 1 | |
| 21C7821G01 | FIXTURE, GAS GENERATOR STATOR ASSEMBLY | 1 | |
| 21C7863P01 | TAB INSPECTION AND SETTING FIXTURE, PT SHAFT | 1 | |
| 21C8104G01 | FIXTURE FAN VARIABLE GEOMETRY SETTING | 1 | |
| 21C8284G01 | FIXTURE, LPT MODULE ASSEMBLY HOLDING | 1 | |
| 21C895G003 | FIXTURE SET | 1 | |
| 2227000F120 | ASSEMBLY TORQUE FIXTURE | 1 | |
| 22282-T200 | HOLDING FIXTURE ASSEMBLY | 2 | |
| 22282T200 | HOLDING FIXTURE ASSEMBLY | 2 | |
| 23058496-2 | FIXTURE – COMPRESSOR CASE, LATHE HOLDING | 1 | |
| 247C5020 | FIXTURE, INSTALL/REMOVE-MID SHAFT ASSEMBLY | 1 | |
| 247C5046 | FIXTURE - LIFT STG 1 HPT NOZZLE ASSEMBLY | 1 | |
| 247C5189 | FIXTURE, LIFT & TURN-HP COMPRESSOR UPPER CASE HALF | 1 | |
| 247C5307 | FIXTURE, INSTALL SPRING ASSEMBLY | 1 | |
| 247C5361 | FIXTURE, INSTALL/REMOVE MID SHAFT ASSEMBLY | 1 | |
| 2518000F1 | ASSEMBLY FIXTURE | 1 | |
| 2550105 | Fixture, setting, operating lever | 2 | |
| 2550134 | Fixture, preset, operating lever | 2 | |
| 2550145 | Fixture, preset, governor spring | 2 | |
| 2550171 | Fixture – Assembly | 1 | |
| 2550875 | Fixture – Leak Test, Metering Valve Sleeve Assembl | 1 | |
| 2558596 | BRAKE ASSEMBLY FIXTURE | 1 | |
| 2558604 | FIXTURE, ASSEMBLY | 1 | |
| 2558637 | ASSEMBLY FIXTURE | 1 | |
| 2558692 | BUSHING ASSEMBLY FIXTURE | 1 | |
| 2558694 | ASSEMBLY FIXTURE | 2 | |
| 2558760 | Brake Assembly Fixture | 1 | |
| 2558783 | FIXTURE, BEARING CUP/SLEEVE REMOVAL, IB AND OB WHEEL HALF,USED WITH KIT P/N 2558782 | 1 | |
| 2558927 | TORQUE TUBE DRIVE PIN ASSEMBLY FIXTURE | 1 | |
| 2561520 | Fixture, setting, hat valve | 2 | |
| 2566442 | Seal Installation Fixture | 1 | |
| 2566501 | ASSEMBLY FIXTURE | 1 | |
| 2566531 | Assembly Fixture | 1 | |
| 2566532-38 | TRAVEL CHECK FIXTURE ASSEMBLY (CAGE: 06848) | 1 | |
| 2566535 | Metering Valve Assembly Fixture | 1 | |
| 2566676 | ASSEMBLY FIXTURE | 1 | |
| 2566696 | VARIABLE DISPLACEMENT (IN-LINE) ASSEMBLY FIXTURE | 1 | |
| 2566697 | FIXED DISPLACEMENT (BENT-AXIS) ASSEMBLY FIXTURE | 1 | |
| 2566819-2 | MAGNET RETAINER ASSEMBLY FREEZE FIXTURE (CAGE: 06848) | 1 | |
| 2585780 | END PLAY SETTING FIXTURE | 1 | |
| 26015080-101 | HOLDING FIXTURE ASSEMBLY | 1 | |
| 26015080-102 | HOLDING FIXTURE ASSEMBLY | 1 | |
| 26015080-202 | HOLDING FIXTURE ASSEMBLY | 1 | |
| 26122-AF1 | INLET COVER HOLDING FIXTURE ASSEMBLY DISASSEMBL | 1 | |
| 26122-AT1 | TORQUE FIXTURE ASSEMBLY | 1 | |
| 26398-AT1 | PRESS FIXTURE ASSEMBLY | 1 | |
| 269T9269 | CNTRG FIXTURE ASSEMBLY | 2 | |
| 270-00951 | ASSEMBLY FIXTURE, AIR INLET ASSY | 1 | |
| 27010-046-000 | SET OF TIE LOADS FOR TEXT FIXTURE | 1 | |
| 27010-048-000 | SET OF TIE LOADS FOR TEXT FIXTURE | 1 | |
| 274000AT4 | ASSEMBLY HOLDING FIXTURE | 1 | |
| 274040AT1 | ACTUATOR ASSEMBLY HOLDING FIXTURE | 1 | |
| 276980-1-1 | FIXTURE ASSEMBLY AXIAL LOAD | 1 | |
| 282700TF1-1001 | Test Fixture Assembly, Elevator PCA | 1 | |
| 282700TF1-1003 | Test Fixture Assembly, Elevator PCA | 1 | |
| 282870AF1 | ASSEMBLY FIXTURE, RELIEF VALVE | 1 | |
| 282870AF1 | Assembly Fixture, Relief Valve | 1 | |
| 282900AF2 | Assembly Fixture | 1 | |
| 283200TF1-1001 | TEST FIXTURE ASSEMBLY, OUTBOARD AILERON PCA | 1 | |
| 287842-1 | Pawl Assembly Drill Fixture | 1 | |
| 287854-1 | Ratchet Assembly Drill Fixture | 1 | |
| 287859-1 | Ring Assembly Drill Fixture | 1 | |
| 287912-1 | GEAR BACKLASH CHECK FIXTURE ASSEMBLY | 1 | |
| 289520-1 | RIVET SET PNEUMATIC FIXTURE | 1 | |
| 290285LAT | Assembly Fixture | 1 | |
| 291133-1 | FIXTURE ASSEMBLY DRAIN VALVE | 1 | |
| 291212-1 | FIXTURE ASSEMBLY VALVE INSTALLING | 1 | |
| 291441-1 | FIXTURE LEAKAGE SEAL TEST | 1 | |
| 293001-1 | HP SHAFT STRETCHING FIXTURE ASSEMBLY | 1 | |
| 293323-1 | SEAL ALIGNMENT FIXTURE | 1 | |
| 293348-1 | SPACER POSITIONER FIXTURE ASSEMBLY | 1 | |
| 293406-1 | BEARING ALIGNMENT FIXTURE ASSEMBLY | 1 | |
| 293778-1 | FIXTURE-SETTING | 1 | |
| 294527-1 | FIXTURE SEAL, HOLDING | 1 | |
| 294813-1 | RIVET SET FIXTURE | 1 | |
| 294882-1 | TURBINE MODULE HANDLING FIXTURE (TO INSTALL OR REMOVE 3801004-2 POWER SECTION FROM ENGINE ASSEMBLY) | 1 | |
| 2958A0000-01 | ASSEMBLY FIXTURE - PISTON | 1 | |
| 2960A0000-01 | ASSEMBLY FIXTURE | 2 | |
| 2960A000D-01 | ASSEMBLY FIXTURE | 1 | |
| 296165-2 | ALIGNMENT FIXTURE, SEAL | 1 | |
| 296324-1 | Pneumatic Drive Rivet Set Fixture | 1 | |
| 296395-1 | STATOR ASSEMBLY HOLDING FIXTURE | 1 | |
| 296447-1 | Fixture-Seal | 1 | |
| 2965A0000-01 | ASSEMBLY FIXTURE | 1 | |
| 296955 | TEST FIXTURE ASSEMBLY BY PASS | 1 | |
| 296957 | TEST FIXTURE ASSEMBLY | 1 | |
| 298185 | TEST FIXTURE ASSEMBLY | 1 | |
| 298262-1 | TEST FIXTURE ASSEMBLY | 1 | |
| 2992A0000-01 | GSE 428 ADJUSTING FIXTURE | 3 | |
| 2AJ65B81120 | ASSEMBLY FIXTURE - ANGLE GEARBOX ASSEMBLY, TRAILING EDGE FLAP DRIVE | 1 | |
| 2AJ65B81121 | ASSEMBLY FIXTURE - ANGLE GEARBOX ASSEMBLY TRAILING EDGE FLAP DRIVE | 1 | |
| 2AJ65B81130 | ASSEMBLY FIXTURE - ANGLE GEARBOX ASSEMBLY TRAILING EDGE FLAP DRIVE | 1 | |
| 2AJ65B81131 | ASSEMBLY FIXTURE - ANGLE GEARBOX ASSEMBLY TRAILING EDGE FLAP DRIVE | 1 | |
| 2AJ65B81131-13 | ASSEMBLY FIXTURE | 1 | |
| 2C 14094G06 | FIXTURE, SEAL CHECK NO. 4 BEARING AND SEAL | 1 | |
| 2C 14672G02 | FIXTURE, LIFT - HP TURBINE ASSEMBLY FORWARD | 1 | |
| 2C14011P03 | ASSEMBLY FIXTURE | 1 | |
| 2C14038G02 | FIXTURE, LIFT - HPT ASSEMBLY AFT | 1 | |
| 2C14042G01TK | FIXTURE , ASSEMBLY-STAGE 2 HPT NOZZLE | 1 | |
| 2C14084 | FIXTURE, RAISE/LOWER ACCESS. DRIVE MOD. FIXT. | 1 | |
| 2C14084 REV C | FIXTURE, RAISE/LOWER ACCESS. DRIVE MOD. FIXT. | 1 | |
| 2C14084G01 | FIXTURE RAISELOWER - ACCESSORY DRIVE GB MODULE | 3 | |
| 2C14094 | FIXTURE, SEATCHECK-NO. 4B BEARING & SEAL | 1 | |
| 2C14094 REV Y | FIXTURE, SEATCHECK-NO. 4B BEARING & SEAL | 1 | |
| 2C14094G04 | SEATING CHECK FIXTURE | 1 | |
| 2C14094G05 | FIXTURE, SEATING CHE | 1 | |
| 2C14094G06 | FIXTURE, SEATING #4 BEARING & SEAL | 1 | |
| 2C14096 | FIXTURE, SEATING CHECK LP TURB ROTOR | 1 | |
| 2C14096 REV E | FIXTURE, SEATING CHECK LP TURB ROTOR | 1 | |
| 2C14096G02 | FIXTURE,SEATING CHECK LP TURBINE ROTOR | 1 | |
| 2C14124 | FIXTURE,SEAL-PRESSURIZE AGB | 1 | |
| 2C14124 REV D | FIXTURE, SEAL/PRESSURIZE ACCESS. GEARBOX | 1 | |
| 2C14124G02 | FIXTURE SEAL | 4 | |
| 2C14126G01TK | FIXTURE, LIFT-COMP. STATOR CASE-UPPER | 1 | |
| 2C14130G04 | FIXTURE, LIFT - ENGINE ASSEMBLY | 2 | |
| 2C14130G05 | FIXTURE, LIFT ‐ ENGINE ASSEMBLY | 1 | |
| 2C14130G09 | FIXTURE, LIFT ‐ ENGINE ASSEMBLY | 3 | |
| 2C14131 | FIXTURE, SEATING CHECK HP TURB. ROTOR | 1 | |
| 2C14131 REV C | FIXTURE, SEATING CHECK HP TURB. ROTOR | 1 | |
| 2C14131G01 | FIXTURE, SEATING CHECK HP TURB | 1 | |
| 2C14131G02 | FIXTURE, SEATING CHECK HPT ROTOR | 4 | |
| 2C14138 | FIXTURE, REMVL-MATING SEAL RINGS - ACCESS GEARBOX | 1 | |
| 2C14138 REV B | FIXTURE, REMOVAL-MATING SEAL RINGS - ACCESS. GEARBOX | 1 | |
| 2C14138G01 | FIXTURE SET, REMOVAL | 11 | |
| 2C14138G02 | FIXTURE REMOVAL MATING SEAL RINGS ACC GEARBOX CF6-80C2 | 12 | |
| 2C14174G02 | FIXTURE, CONCENTRICITY-NO.6 BRG. AND SEALS | 1 | |
| 2C14199 | FIXTURE, INSTALL REMOVE-HP TURB MODULE ASSEMBLY | 1 | |
| 2C14199G03 | FIXTURE, INSTALL/REMOVE HPT MODULE ASSEMBLY | 1 | |
| 2C14199G06 | FIXTURE, INSTALL/REMOVE - HP TURB MODULE ASSEMBLY | 1 | |
| 2C14199G07 | FIXTURE, INSTALL AND REMOVE - HP TURBINE MODULE ASSEMBLY | 4 | |
| 2C14199G08 | FIXTURE, INSTALL/REMOVE HPT MODULE ASSEMBLY | 1 | |
| 2C14199G09 | FIXTURE, INSTALL/REMOVE - HPT MODULE (USE FOR PB) | 1 | |
| 2C14219 | FIXTURE - ASSEMBLY -STAGE 1 LPTN | 1 | |
| 2C14614G01 | FIXTURE RESTRAIN – LPT ASSEMBLY AFT | 1 | |
| 2C14651G01 | CHUCK COMPRESSOR ROTOR ASSEMBLY FIXTURE | 3 | |
| 2C14661G01 | FIXTURE, INSTALLATION/REMOVAL COMPRESSOR REAR FRAME ASSEMBLY | 2 | |
| 2C14661G02 | FIXTURE, REMOVAL COMPRESSOR EAR FRAME ASSEMBLY | 1 | |
| 2C14668 | FIXTURE SET, I/R LPT NOZ STG1 | 1 | |
| 2C14668G01 | FIXTURE SET INST & REM LPT STG 1 NOZZLE | 3 | |
| 2C14668G01TK | FIXTURE SET, INSTALLATION AND REMOVAL LPT NOZZLES STAGE 1 | 1 | |
| 2C14668G02 | FIXTURE SET, INSTALLATION AND REMOVAL - LPT NOZZLES STAGE 1 | 1 | |
| 2C14672G04 | FIXTURE, LIFT - HPT ASSEMBLY FWD | 1 | |
| 2C14695G01 | FIXTURE, LIFT - STAGE 1 HPT NOZZLE ASSEMBLY | 2 | |
| 2C14695G01TK | FIXTURE, LIFT-STAGE 1 HPT NOZZLE ASSEMBLY | 1 | |
| 2C14696G01 | FIXTURE, ASSEMBLY ‐ STAGE 1 HPT NOZZLE | 1 | |
| 2C14696G01TK | FIXTURE, ASSEMBLY HPT NOZZLE STAGE 1 | 1 | |
| 2C14696G02 | FIXTURE,ASSEMBLY STG 1 | 1 | |
| 2C14699 | FIXTURE, LIFT-COMPR. STATOR CASE, ,UPPER | 2 | |
| 2C14699 REV D | FIXTURE, LIFT-COMPR. STATOR CASE, ,UPPER | 1 | |
| 2C14699G01 | FIXTURE, LIFT - COMPRESSOR STATOR CASE, UPPER | 2 | |
| 2C14702G01 | FIXTURE, ASSEMBLY-HPT NOZZLE STAGE 2 | 2 | |
| 2C14712 | FIXTURE, LIFT-COMPR. STATOR CASE, ,UPPER | 1 | |
| 2C14712 REV D | FIXTURE, LIFT-COMPR. STATOR CASE, ,UPPER | 1 | |
| 2C14722 | FIXTURE, RUNOUT-FAN STATOR, ASSEMBLED ENGINE | 2 | |
| 2C14722 REV A | FIXTURE, RUNOUT-FAN STATOR, ASSEMBLED ENGINE | 1 | |
| 2C14722G01 | FIXTURE, RUNOUT ‐ FAN STATOR, ASSEMBLED ENGINE | 4 | |
| 2C14722G01TK | FIXTURE, RUNOUT-FAN STATOR ASSEMBLED ENGINE | 1 | |
| 2C14751G01 | FIXTURE, LIFT ‐ FORWARD FAN CASE | 3 | |
| 2C14770G01 | FIXTURE, INSPECT-LPT NOZZLE ASSEMBLY STAGE 1 | 2 | |
| 2C14784 | FIXTURE, REMOVE-HPT ROTOR AFT OUTER AIR SEAL | 1 | |
| 2C14784G01 | FIXTURE, REMOVE - HPT ROTOR AFT OUTER AIR SEAL | 1 | |
| 2C14785 | FIXTURE, PULL-HPT ROTOR AFT AIR SEALS | 1 | |
| 2C14785 REV B | FIXTURE, PULL-HPT ROTOR AFT AIR SEALS | 1 | |
| 2C14785G01 | FIXTURE, PULL-HPTR AFT AIR SEALS | 2 | |
| 2C14785G02 | FIXTURE, PULL - HPT ROTOR AFT AIR SEALS | 1 | |
| 2C14785G05 | FIXTURE, PULL- HPTR AFT AIR SEALS ( PULL FIXTURES ) | 1 | |
| 2C14790 | FIXTURE, RUNOUT - NO. 3 BEARING/SEALS | 1 | |
| 2C14790 REV C | FIXTURE, RUNOUT - NO. 3 BEARING/SEALS | 1 | |
| 2C14790G01 | FIXTURE, RUNOUT - NO. 3 BEARING SEALS | 2 | |
| 2C14816G01 | FIXTURE, LIFT/TURN,FIXTURE, LIFT/TURN,STAGE 2 HPT SHROUD ASSEMBLY | 1 | |
| 2C14818G01 | FIXTURE ASSEMBLY, RESTRAINING HPTN SUPPORT STG. 1 | 1 | |
| 2C14821G01 | FIXTURE ASSEMBLY, RE | 1 | |
| 2C14821G02 | FIXTURE ASSEMBLY, RESTRAIN -IMPELLER | 1 | |
| 2C14848 | FIXTURE, ASSEMBLY / DISASSEMBL | 1 | |
| 2C14866 | FIXTURE SET | 1 | |
| 2C14930G01 | FIXTURE, LIFT AND TURN ‐ FAN ROTOR ASSEMBLY | 1 | |
| 2C14974G02 | FIXTURE RUNOUT - FAN STATOR, ASSEMBLED ENGINE | 2 | |
| 2C14981G01 | FIXTURE, LIFT - ROTATING INTERSTAGE SEAL | 1 | |
| 2C15010G04 | FIXTURE, ASSEMBLY/IN | 1 | |
| 2C15010G06 | FIXTURE, ASSEMBLY/IN | 1 | |
| 2C18051 | FIXTURE RUNOUT - FAN STATOR, ASSEMBLED ENGINE | 1 | |
| 2C18051G01 | FIXTURE RUNOUT - FAN STATOR, ASSEMBLED ENGINE | 1 | |
| 2C18063G01 | FIXTURE, LIFT, LPT NOZZLE ASSEMBLIES, STAGE 2-4 | 1 | |
| 2C18096G01 | FIXTURE, INSTL - ROTATING INNER SEAL RETAINER | 1 | |
| 2C18118 | FIXTURE, GAGE GO- STATIONARY AIR/OIL SEAL, NO 4 BRG | 1 | |
| 2C4094 | FIXTURE, SEATCHECK- NO 4B BEARING AND SEAL | 1 | |
| 2C5122P01 | FIXTURE, LPT ROTOR SEATING CHECK | 1 | |
| 2C5186P01 | FIXTURE, HPT ROTOR SEATING CHECK | 1 | |
| 2C5203P01 | FIXTURE, HPT STAGE 2 DISK SEATING CHECK | 1 | |
| 2C5786G01 | FIXTURE - MACHINING SUMP SEALS | 1 | |
| 2C6029 | FIXTURE, DISASSEMBLY-COMP. | 1 | |
| 2C6029G01 | FIXTURE, DISASSEMBLY-COMP. | 1 | |
| 2C6029G04 | FIXTURE, DISASSEMBLY - HPCR | 1 | |
| 2C6029G05 | FIXTURE, DISASSEMBLY | 1 | |
| 2C6145 | FIXTURE, CONCENTRICITY-FAN FRAME, NO. 3 BRG. SEALS | 1 | |
| 2C6145 REV H | FIXTURE, CONCENTRICITY-FAN FRAME, NO. 3 BRG. SEALS | 1 | |
| 2C6175 | COMPRESSOR CASE FIXTURE TOOL | 1 | |
| 2C6175G04 | FIXTURE, LIFT - COMPRESSOR STATOR CASE, UPPER | 1 | |
| 2C6178 | FIXTURE SET | 1 | |
| 2C61789G02 | FIXTURE SET, VSV TIP | 1 | |
| 2C6178G01 | FIXTURE SET, POSITION VSV | 1 | |
| 2C6178G11 | FIXTURE SET | 1 | |
| 2C6178G13 | FIXTURE SET, POSITION - VSV | 1 | |
| 2C6200 | FIXTURE, ASSEMBLY/DISASSEMBLY | 1 | |
| 2C6200G01 | FIXTURE, ASSEMBLY/DISASSEMBLY | 1 | |
| 2C6259 | FIXTURE, SET SECURE-VARIABLE STATR ARMS, STG 3 - 6 | 1 | |
| 2C6259 REV P | FIXTURE, SET SECURE-VARIABLE STATOR ARMS, STG. 3 - 6 | 1 | |
| 2C6259G01 | FIXTURE SET, SECURE-VARIABLE | 1 | |
| 2C6259G04 | FIXTURE SET, SECURE - VSV ARMS | 1 | |
| 2C6259G05 | FIXTURE SET - SECURE | 1 | |
| 2C6536 | FIXTURE SET, PLASMA SPRAY | 1 | |
| 2C6536G01 | FIXTURE SET, PLASMA SPRAY | 1 | |
| 2C6537 | FIXTURE SET, MACHINING-C/R S | 1 | |
| 2C6537G01 | FIXTURE SET, MACHINING-C/R S | 1 | |
| 2C6538 | FIXTURE SET, MACHINING-C/R | 1 | |
| 2C6538G01 | FIXTURE SET, MACHINING-C/R | 1 | |
| 2C6539 | FIXTURE SET, MACHINING - C/R | 1 | |
| 2C6539G01 | FIXTURE SET, MACHINING - C/R | 1 | |
| 2C6543 | FIXTURE SET, PLASMA SPRAY | 1 | |
| 2C6543G01 | FIXTURE SET, PLASMA SPRAY | 1 | |
| 2C6544 | FIXTURE SET, MACHINING | 1 | |
| 2C6544G01 | FIXTURE SET, MACHINING | 1 | |
| 2C6546 | FIXTURE SET, MACHINING | 1 | |
| 2C6546G01 | FIXTURE SET, MACHINING | 1 | |
| 2C6567 | FIXTURE,WELD-STATIONARY AIR SE | 1 | |
| 2C6567G01 | FIXTURE,WELD-STATIONARY AIR SE | 1 | |
| 2C6568 | FIXTURE,WELD-STATIONARY AIR SE | 1 | |
| 2C6568G01 | FIXTURE,WELD-STATIONARY AIR SE | 1 | |
| 2C6581 | FIXTURE, ASSEMBLY - CDP SEAL | 1 | |
| 2C6585 | FIXTURE, ASSEMBLY - TMF | 1 | |
| 2C6585G01 | FIXTURE, ASSEMBLY - TMF | 1 | |
| 2C658I | FIXTURE, ASSEMBLY - CDP SEAL | 1 | |
| 2C6628 | SET MASTER, FIXTURE | 1 | |
| 2C6661G01 | FIXTURE,SET-GRIND HPC PLATFORM BLDS | 1 | |
| 2C6825 | FIXTURE,LIFT-TURBINE REVERSER. (GE) | 1 | |
| 2C6856 | FIXTURE, LIFT - FAN ROTOR SUBASSEMBLY | 2 | |
| 2C6856G03 | LIFT FIXTURE - FAN ROTOR SUBASSEMBLY | 1 | |
| 2C6856G04 | Fixture, Lift - Fan Rotor Sub-Assembly | 3 | |
| 2C6880G0 | ASSEMBLY FIXTURE | 1 | |
| 2C6880G01 | ASSEMBLY FIXTURE | 1 | |
| 2C6880G02 | ASSEMBLY FIXTURE | 1 | |
| 2C6880G03 | ASSEMBLY FIXTURE | 1 | |
| 2C6880G04 | ASSEMBLY FIXTURE | 1 | |
| 2C6880G05 | ASSEMBLY FIXTURE | 1 | |
| 2C6880G07 | ASSEMBLY FIXTURE | 1 | |
| 2C6880G08 | ASSEMBLY FIXTURE | 1 | |
| 2C6951G01 | FIXTURE - RUNOUT, FAN ROTOR ASSEMBLED ENGINE | 2 | |
| 2C6987G03 | FIXTURE, RUNOUT – FAN STATOR CASE | 1 | |
| 2C6998G05 | FIXTURE SET REMOVAL MATING SEAL RINGS-ACCESORY GEARBOX | 2 | |
| 2C6998G06 | FIXTURE SET REM/ PIN | 3 | |
| 2C6I45 | FIXTURE, CONCENTRICITY-FAN FRAME, NO. 3 BRG. SEALS | 1 | |
| 2C7147G02 | FIXTURE, HOLDING, ROT AIR SEAL, NO. 4 BEARING | 1 | |
| 2C7147P02 | FIXTURE, HOLDING, ROT AIR SEAL, NO. 4 BEARING | 1 | |
| 2C7148G03 | Fixture, Holding, Nut, Seal, No. 4R Brg | 1 | |
| 2C7149 | FIXTURE,HOLDING-NO.4R BEAR SEA | 1 | |
| 2C7149G01 | Fixture, Holding, Air Vent Seal, No. 4R Brg | 1 | |
| 2C7149G01 | FIXTURE,HOLDING-NO.4R BEAR SEA | 1 | |
| 2C7180 | FIXTURE SET,SHOT PEEN-ENGINE C | 1 | |
| 2C7180G01 | FIXTURE SET,SHOT PEEN-ENGINE C | 1 | |
| 2C7224G03 | FIXTURE SET | 1 | |
| 2C7284 | FIXTURE SET, POSITIONING - CRF | 1 | |
| 2C7284G01 | FIXTURE SET, POSITIONING - CRF | 1 | |
| 2C7406 | FIXTURE SET,HEAT TREAT AND WEL | 1 | |
| 2C7406G01 | FIXTURE SET,HEAT TREAT AND WEL | 1 | |
| 2C7434G01 | FIXTURE, BRAZING, SEA;, STA. AIR 4R | 1 | |
| 2C7787G01 | FIXTURE SET, HEAT | 1 | |
| 2C8040G01TK | FIXTURE CONCENTRICITY-NO.3 BRG. STATIONARY AIR &OIL SEALS | 1 | |
| 2C8041G06 | FIXTURE SET | 1 | |
| 2C8072G02 | G/B DRIVE SHAFT SEAL FIXTURE | 2 | |
| 2C8072G03 | FIXTURE SEAL REMOVAL | 1 | |
| 2C8102G02 | FIXTURE, TORQUE MEASURING - VSV ASSEMBLY | 1 | |
| 2C81039G01 | ADAPTER, HPT MODULE LIFT AND TURN (HPT MODULE ASSEMBLY/DISASSEMBLY FIXTURE) | 1 | |
| 2C81189 | SET, FIXTURE | 1 | |
| 2C81189G01 | SET, FIXTURE, RESTRAINING | 1 | |
| 2C81191G01 | FIXTURE, VANE SETTING | 1 | |
| 2C81221 | FIXTURE, SETTING VG TURNBUCKL | 1 | |
| 2C81221G01 | FIXTURE, SETTING VG TURNBUCKL | 1 | |
| 2C81221G02 | FIXTURE, SETTING | 1 | |
| 2C81224 | FIXTURE ASSEMBLE/DISASSEMBLE HPC ROTOR | 1 | |
| 2C81224 FIX | FIXTURE ASSEMBLE/DISASSEMBLE HPC ROTOR | 1 | |
| 2C81243G01 | FIXTURE, TURNBUCKLE SET | 1 | |
| 2C81301G01 | FIXTURE, ASSEMBLY - STAGE 2 NOZZLE | 1 | |
| 2C81433 | FIXTURE, DISASSEMBLY HPTR | 1 | |
| 2C81433G01 | FIXTURE, DISASSEMBLY HPTR | 1 | |
| 2C81433G03 | FIXTURE, DISASSEMBLE - HPT ROTOR | 1 | |
| 2C81455G01 | FIXTURE, ASSEMBLE OTC TO STAGE 2 | 1 | |
| 2C81480G01 | FIXTURE, ASSEMBLY/DISASSEMBLY | 1 | |
| 2C81801G01 | FIXTURE HOLDING - GENERAL PURPOSE | 1 | |
| 2C90567G01 | FIXTURE, GAS GENERATOR ASSEMBLY | 1 | |
| 2C90595G01 | FIXTURE, GAS GENERATOR STATOR ASSEMBLY | 1 | |
| 2C91030G01 | FIXTURE - #6 SEAL | 1 | |
| 2C91088G01 | FIXTURE - SPLITTER NOSE | 1 | |
| 2C91110G01 | FIXTURE - HPT DISASSEMBLY | 1 | |
| 2C91118G01 | FIXTURE-ASSY/DISASSEMBLY NOZZLE | 1 | |
| 2C91120G01 | FIXTURE-ASSY/DISASSEMBLY NOZZLE | 1 | |
| 2C91122G01 | FIXTURE-MACHINING TURBINE SEAL | 1 | |
| 2C91123G01 | FIXTURE-MACHINING TURBINE SEAL | 1 | |
| 2C91124G01 | FIXTURE-MACHINING TURBINE SEAL | 1 | |
| 2C91192G01 | FIXTURE-COMPRESSOR SUB ASSEMBLY | 1 | |
| 2C91333G01 | FIXTURE - SET VG | 1 | |
| 2C91350G01 | FIXTURE, STAGE 1-2 ROTOR COOLING PLATES ASSEMBLY/DISASSEMBLY | 1 | |
| 2C91350P38 | FIXTURE, STG.1 - 2. ROTOR COOLING PLATE ASSEM / DISA. .HYDRAULIC RAM RW50 | 1 | |
| 2C91352G01 | FIXTURE - ASSY/DISASSEMBLY HPT | 1 | |
| 2C91352G03 | FIXTURE HPT MODULE ASSEMBLY | 1 | |
| 2C91354 | FIXTURE, HOLDING-SENSOR BYPASS FILTER, OIL | 1 | |
| 2C91354G01 | Holding Fixture − Oil Filter By− Pass Sensor (Alternate) | 5 | |
| 2C91354G02 | Holding Fixture − Oil Filter By− Pass Sensor (Recommended) | 10 | |
| 2C91364G01 | FIXTURE, ASSEMBLY/DISASSEMBLY | 1 | |
| 2C91364G03 | FIXTURE STAGE 2 HPT COLING PLATE ASSY / DISASSEMBLY | 1 | |
| 2MIT-1544470 | ASSEMBLY FIXTURE | 1 | |
| 2R1003 | DRILL FIXTURE - FRAME CASE AND SUPPORT | 1 | |
| 2R1484G01 | FIXTURE, PRESS - CASE | 1 | |
| 2TSJ65B01557 | TEST FIXTURE - AUTOBRAKE ACTUATOR ASSEMBLY | 1 | |
| 300-1110 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| 3003A0000-01 | FIXTURE,ASSEMBLY | 1 | |
| 3052A0000-01 | ASSEMBLY FIXTURE | 1 | |
| 3060A0000-01 | ASSEMBLY FIXTURE | 1 | |
| 3062A0000-01 | FIXTURE-ASSEMBLY | 1 | |
| 306500AT1 | Assembly Fixture | 1 | |
| 30R0004G01 | FIXTURE,DRILL, SET SCREW HPC | 1 | |
| 30R0004G02 | FIXTURE, DRILL - SET SCREW, F414 HPC ROTOR, STAGE 4 -7 | 1 | |
| 3170014-1 | NOSE STRUT HOLDING FIXTURE | 1 | |
| 3176-4 | BEARING ASSEMBLING PRESS-IN FIXTURE | 1 | |
| 318200AF1 | ASSEMBLY FIXTURE | 1 | |
| 318203TF1-1 | TEST FIXTURE FILTER PLUG GSE 231 EMB-120 | 1 | |
| 32-41-12 - FIG 902 | WHEEL AND TIRE ASSEMBLY FIXTURE | 1 | |
| 32-41-12-FIG902 | WHEEL AND TIRE ASSEMBLY FIXTURE | 1 | |
| 3211A0000-01 | ASSEMBLY FIXTURE | 3 | |
| 3211B0000-01 | ASSEMBLY FIXTURE | 4 | |
| 3220A0000-01 | DISASSEMBLY FIXTURE | 1 | |
| 32409 | FIXTURE SETTING | 1 | |
| 3402244-1 | FIXTURE ASSEMBLY | 1 | |
| 34500063-1AT | ASSEMBLY FIXTURE | 1 | |
| 354153-TCR-1 | FIXTURE SET,AIRCRAFT MAINTENANCE | 1 | |
| 35M5M01060000 | FIXTURE; POSITIONING, ANGLE-OF-ATTACK SENSOR | 1 | |
| 365A91-3245-01 | REINFORCED NOSE LG LOCKING FIXTURE. | 1 | |
| 3712023-1 | BALANCE CRADLE ASSEMBLY FIXTURE | 1 | |
| 3727324-1 | PRESSURE TEST FIXTURE ASSEMBLY | 1 | |
| 3791111-1 | Actuator Assembly Fixture | 1 | |
| 381200AT1-101 | Assembly Fixture | 1 | |
| 381500AT1-101 | ASSEMBLY FIXTURE | 1 | |
| 381500AT1-103 | ASSEMBLY FIXTURE | 1 | |
| 390500AF1 | ASSEMBLY FIXTURE, TORQUE | 1 | |
| 390500AF2 | ASSEMBLY FIXTURE, TORQUE | 1 | |
| 390580TF1 | TEST FIXTURE, PRESSURE SENSOR | 1 | |
| 390600AF1 | ASSEMBLY FIXTURE, TORQUE | 1 | |
| 390600AF1 | Assembly Fixture, Torque | 1 | |
| 390600AF2 | ASSEMBLY FIXTURE, TORQUE | 1 | |
| 390600AF2 | Assembly Fixture, Torque | 1 | |
| 3928003-101 or -103 | Test Fixture (Swivel Valve subassembly) | 1 | |
| 3928003-101-103 | TEST FIXTURE (SWIVEL VALVE SUBASSEMBLY) | 1 | |
| 3C4334P01 | #4 BEARING SEATING FIXTURE | 1 | |
| 3CF65B80552 | CHECK FIXTURE - STABILIZER JACKSCREW DIFFERENTIAL ASSEMBLY, BACKLASH | 1 | |
| 3J12773 | Fixture, curing-nose cone assy | 1 | |
| 3S81071-101 | FIXTURE ASSEMBLY HOLDING CORE HONEYCOMB REPAIR | 1 | |
| 3T900-0579 | FIXTURE HEIGHTLOCK PLATE SETTING | 1 | |
| 3TSJ65B01503-1 | TEST FIXTURE - ACTUATOR ASSEMBLY, NOSE LANDING GEAR STEERING | 1 | |
| 4002-0028-1 | FIXTURE, ARM ASSEMBLY, STIFFNESS AND BACKLASH | 1 | |
| 4066413-90 | SENSOR - TEST FIXTURE WEIGHT | 1 | |
| 4066413-901 | SENSOR - TEST FIXTURE WEIGHT AND BALANCE. | 1 | |
| 4070352 | ALTITUDE ASSEMBLY CALIBRATION FIXTURE | 1 | |
| 40885-8AF1 | ASSEMBLY FIXTURE, DIAPHRAGM | 1 | |
| 41-1579-F-2 | Assembly Fixture | 1 | |
| 41-1844-001-F-1 | Assembly Fixture-Drain Valve Manifold | 1 | |
| 4101003-F1 | VARIABLE DISPLACEMENT (IN-LINE) ASSEMBLY FIXTURE | 1 | |
| 4101003-F2 | FIXED DISPLACEMENT (BENT-AXIS) ASSEMBLY FIXTURE | 1 | |
| 4101003-F3 | ASSEMBLY FIXTURE | 1 | |
| 4164003-8 | ROTOR BEARING DISASSEMBLY FIXTURE (2 IT) | 1 | |
| 41771T600 | ASSEMBLY FIXTURE | 1 | |
| 419300AF1 | ASSEMBLY FIXTURE | 1 | |
| 419300F1 | ASSEMLY FIXTURE | 1 | |
| 42-27-04-025 | FIXTURE FOR ADJUSTING THE COUNTERWEIGHT-PAWL ASSEMBLY | 1 | |
| 421-036 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| 421-0951 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| 421-3326 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| 421-3437 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| 4216008 | DIFFUSER FIXTURE | 1 | |
| 4220-0013-1 | FIXTURE, MOUNT ASSEMBLY, STIFFNESS, AND BACKLASH | 1 | |
| 4246000F1 | ASSEMBLY FIXTURE | 1 | |
| 429-242-006-101 | FIXTURE ASSEMBLY | 1 | |
| 43100-20-2001 | ASSEMBLY FIXTURE | 1 | |
| 43100-20-2002-X | BEARING ASSEMBLY FIXTURE | 1 | |
| 43100-20-2006 | LONG BASE ASSEMBLY FIXTURE | 1 | |
| 442238-F-8 | Head Sensor Cover Hold -Down Fixture | 1 | |
| 4448006-000 | DIAPHRAGM ASSEMBLY FIXTURE | 2 | |
| 45-135030-9/ 810 | SERIES REFERENCE: 1077. NOMENCLATURE: TRIM TAB FREE PLAY CHECK FIXTURE. SPECIFICATIONADDITIONAL DATA: LOCAL MANUFACTURE PER APPROPRIATE MM ATA 27 AS ALTERNATE TOOL. CALIBRATED DIAL INDICATOR MUST BE WITH UNIT FOR USE. ATA: 270055 | 2 | |
| 460005887PM | SETTING FIXTURE | 1 | |
| 470-24990J | SETTING FIXTURE | 1 | |
| 473014 | REPLACEMENT HYDRAULIC HOSE TOOL NO. 473014TURNS HYDRAULICALLY TIGHTENED FASTENER COLLARS. ONE SIZE FITS ALL HOLES. INCLUDED WITH AA293268 HEAD FIXTURE | 1 | |
| 473015 | REPLACEMENT HOSES TOOL NO. 473015 THIS KIT CONTAINS ALL HYDRAULIC SEALS CAPABLE OF REBUILDING ONE HYDRAULIC JACK OF THE AA293268 CYLINDER HEAD/MAIN BEARING HYDRAULIC FIXTURE. | 1 | |
| 4916802-16 | FIXTURE NOSE WHEEL RIGGING | 1 | |
| 4916802-2 | NOSE WHEEL RIG FIXTURE | 3 | |
| 4916802-501 | Fixture-nose wheel rigging | 1 | |
| 4916802-502 | NOSE WHEEL RIGGING FIXTURE | 1 | |
| 4920-99-617-1839 | ASSEMBLY FIXTURE | 1 | |
| 4D1691-12 | HOLDING FIXTURE DISASSEMBLY | 1 | |
| 4F60160 | Holding Fixture, Fluid Flow Test Setup (2IT) | 1 | |
| 4MIT65B82591 | TORQUE FIXTURE - PISTON, STEERING ACTUATOR, NOSE LANDING GEAR | 1 | |
| 4TSJ65B80859 | TEST FIXTURE - SEQUENCE MECHANISM ASSEMBLY, SPEED BRAKE | 1 | |
| 501353 | FIXTURE – 501 SERIES LLL VANE & SEAL SUPPORT STRESS RELIEVE | 1 | |
| 5035-0023W01 | LOWER CAM EXT SEALS ASSY FIXTURE | 1 | |
| 504553XIE | Assembly Fixture | 1 | |
| 5098T01G02 | FIXTURE, ASSEMBLY, DISASSEMBLY | 1 | |
| 51154AF1 | ASSEMBLY FIXTURE (PARKER HANNIFIN CORPORATION) | 1 | |
| 5180002-1 | CONTROL SERVICE BALANCING FIXTURE | 3 | |
| 5213A0000-01 | ASSEMBLY FIXTURE | 3 | |
| 5214A0000-01 | ASSEMBLY FIXTURE (IF REQUIRED) | 4 | |
| 5215A0000-01 | ASSEMBLY FIXTURE - PISTON | 1 | |
| 52434A0000-01 | TEST FIXTURE SET | 1 | |
| 528-161 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| 53023AF2 | RESERVOIR ASSEMBLY FIXTURE | 1 | |
| 53065-AT7 | HOLDING FIXTURE ASSEMBLY, DISASSEMBLY | 1 | |
| 53377A2600-02 | ASSEMBLY FIXTURE (IF REQUIRED) | 1 | |
| 5533A0000-01 | ASSEMBLY FIXTURE (IF REQUIRED) | 1 | |
| 55614S0000 | ASSEMBLY FIXTURE | 1 | |
| 558-1-03180 | ASSEMBLE FIXTURE | 1 | |
| 558-1-05849 | ASSEMBLY FIXTURE | 1 | |
| 558-1-30120 | FIXTURE-TORQUE, SETTING | 1 | |
| 558-1-30123 | FIXTURE-SETTING | 1 | |
| 558-2-05990 | FIXTURE BONDING MOTOR HOUSING ASSEMBLY | 1 | |
| 55961S0000 | ASSEMBLY FIXTURE | 1 | |
| 56193T4 | SPRING SEAT ASSEMBLY FIXTURE | 1 | |
| 56535S0000 | ASSEMBLY FIXTURE | 2 | |
| 56536S0000 | ASSEMBLY FIXTURE | 1 | |
| 56580S0000 | HOLDING FIXTURE ASSEMBLY | 1 | |
| 56951A0000-01 | ASSEMBLY MEASURING FIXTURE | 1 | |
| 56966A0000-01 | ASSEMBLY FIXTURE | 1 | |
| 56976A0000-01 | ASSEMBLY FIXTURE | 1 | |
| 57005A0000-01 | ASSEMBLY FIXTURE | 1 | |
| 57283A0000-01 | ASSEMBLY FIXTURE | 1 | |
| 57547 A 0000-01 | FIXTURE - FTB TEST (GSE 071) | 9 | |
| 57547A0000-01 | FIXTURE - FTB TEST GSE 072 | 9 | |
| 57560A0000-01 | Assembly Fixture | 1 | |
| 57949A0000-01 | FIXTURE,HOLDING,NOSE LANDING GEAR | 2 | |
| 57949A0000‐01 | FIXTURE,HOLDING,NOSE LANDING GEAR | 2 | |
| 57975A0000-01 | ASSEMBLY FIXTURE | 1 | |
| 58256 | FIXTURE, FLOW TEST, NOZZLE ASSEMBLY | 1 | |
| 58332A0000-01 | ASSEMBLY FIXTURE | 1 | |
| 58371A0000-01 | Assembly Fixture | 1 | |
| 5838073-1 | APU LIFTING FIXTURE-5838073-1-GSE4900047 | 2 | |
| 58472A0000-01 | ASSEMBLY FIXTURE | 1 | |
| 58474A0000-01 | ASSEMBLY FIXTURE | 1 | |
| 58758A0000-01 | Disassembly Fixture | 1 | |
| 59060A0000-01 | Assembly Fixture | 1 | |
| 59078A0000-01 | ASSEMBLY FIXTURE | 1 | |
| 59131A0000-01 | ASSEMBLY FIXTURE | 1 | |
| 59148A0000-01 | ASSEMBLY FIXTURE | 1 | |
| 5916715-1 | Fixture assemly-tab rigging，univer sal | 7 | |
| 5916784-1 | CHECK FIXTURE TEST SET 0.0005"READIN | 4 | |
| 59197A0000-01 | ASSEMBLY FIXTURE | 1 | |
| 59225A0000-01 | ASSEMBLY FIXTURE | 1 | |
| 59492A0000-01 | CLAMPING FIXTURE 170 GSE-435 | 1 | |
| 59513A0000-01 | FIXTURE-ASSEMBLY | 1 | |
| 59516A0000M01 | FIXTURE-ASSEMBLY AND STAKING | 1 | |
| 5952844-1 | THRUST REVERSER AMIT FIXTURE | 1 | |
| 59594A0000-01 | ASSEMBLY FIXTURE | 1 | |
| 59595A0000-01 | ASSEMBLY FIXTURE | 1 | |
| 59597A0000-01 | ASSEMBLY FIXTURE | 1 | |
| 59654T200 | HOLDING FIXTURE BASE | 1 | |
| 59654T200 | Holding Fixture base | 1 | |
| 59654T200PM | HOLDINGFIXTUREBASE | 1 | |
| 5965877-501 | Align Fixture-Seat Track | 7 | |
| 59824A0000-01 | DESASSEMBLY FIXTURE | 1 | |
| 5MIT-1527100-1 | ASSEMBLY FIXTURE | 1 | |
| 5MIT65B01503 | TORQUE FIXTURE - STEERING ACTUATOR PISTON, NOSE LANDING GEAR | 2 | |
| 5T5-471A | GIRP LOAD TEST FIXTURE ASSEMBLY | 1 | |
| 6037500 | DRIBBLE FLOW TEST FIXTURE USED ON THE LARGE NOZZLE METERING TIPS FOR DRIBBLE FLOW TEST. | 1 | |
| 6037501 | DRIBBLE FLOW TEST FIXTURE USED ON THE SMALL NOZZLE METERING TIPS FOR DRIBBLE FLOW. | 1 | |
| 60429-101 | PACKING FIXTURE, CANOPY (WITH CARDBOARD INSERTS) | 1 | |
| 615000AF1 | Assembly Fixture, Torque | 1 | |
| 615000AF2 | Assembly Fixture, Spring | 1 | |
| 616600AF1 | ASSEMBLY FIXTURE | 1 | |
| 620-01FE224 | ASSEMBLY/DISASSEMBLY FIXTURE | 1 | |
| 6201FE146 | ASSEMBLY, DISASSEMBLY FIXTURE | 1 | |
| 6201FE146-171 | ASSEMBLY/DISASSEMBLY FIXTURE | 1 | |
| 62203-0500 | 154 Way CMC Header Assembly PCB Insertion Fixture | 1 | |
| 63041017-IAS | ASSEMBLY FIXTURE NLG | 1 | |
| 6398-AT1 | PRESS FIXTURE PARKER HSD ASSEMBLY | 1 | |
| 6429927-1 | Generator Assembly Fixture | 1 | |
| 6429931-1 | ROTOR ASSEMBLY FIXTURE | 1 | |
| 6429931-1 | Rotor Assembly Fixture | 1 | |
| 64882-101 | VACUUM ADAPTER USE WITHMETAL PACKING FIXTURES | 1 | |
| 65-44761-F12 | Bearing Assembly Fixture | 1 | |
| 65-44761-F3 | Test Fixture Manifold Assembly | 1 | |
| 65-44761-F4 | Test Fixture Manifold Assembly | 1 | |
| 65-44834-F6 | Rod End Assembly Pressing Fixture | 1 | |
| 65-6-01FV135-3 | Assembly Fixture | 2 | |
| 65-6-01FV135-3PM | ASSEMBLY FIXTURE | 1 | |
| 653-2528-002 | REAR INTERCONNECT ASSEMBLY ALIGNMENT FIXTURE | 1 | |
| 65455-101 | RESERVOIR MOUNTING FIXTURE | 2 | |
| 65530 | FIXTURE, FLOW TEST, TIP ASSEMBLY | 1 | |
| 662-2741-001 | FIXTURE SERVO TORQUE | 1 | |
| 66D38172 | FIXTURE ASSEMBLY | 1 | |
| 6717X-PG-AF1 | ASSEMBLY FIXTURE - POTENTIONMETER | 1 | |
| 67360-101 | PACKING FIXTURE ASSEMMBLY | 1 | |
| 67548-101 | PACK HEIGHT FIXTURE BASE | 1 | |
| 676-5328-001 | NOISE TEST FIXTURE | 1 | |
| 67759-101 | INSERT，PACKING FIXTURE | 1 | |
| 767 | Assembly Fixture | 8 | |
| 7943 | CAM ASSEMBLY FIXTURE | 1 | |
| 69928 | FLOW TEST, FIXTURE, NOZZLE ASSEMBLY | 1 | |
| 71604 | Installing Fixture, Compensator Seat | 1 | |
| 88332 | 88332;Test Fixture;Comsec;IFF45TS | 1 | |
| 739171 | HOLDING FIXTURE ASSEMBLY, ROTOR | 2 | |
| 831630 | Fixture, Flush, No. 2 Bearing Seal Retainer | 1 | |
| 906037 | ASSEMBLY FIXTURE | 1 | |
| 919266 | VACUUM SEAL FIXTURE | 1 | |
| 995011 | SEALING STRAP AND SOLDE-RING FIXTURE | 1 | |
| 995063 | VACUUM SEAL FIXTURE; B/E AEROSPACE | 1 | |
| 6755010 | SEAL FIXTURE | 1 | |
| 6795594 | FIXTURE ASSEMBLY COMPRESSOR ROTOR | 2 | |
| 6795633 | ADAPTER GAS PRODUCER TURBINE ASSEMBLY TO TURBINE ASSEMBLY FIXTURE ATTACHING | 2 | |
| 6795948 | SUPPORT - TURBINE VANE ASSEMBLY VANES STRAIGHTENING FIXTURE | 2 | |
| 6795966 | FIXTURE ASSEMBLY COMPRESSOR ROTOR | 3 | |
| 6796291 | Setting Fixture | 1 | |
| 6796458 | Setting Fixture | 1 | |
| 6796606 | Combustion Liner Assembly Saw Fixture | 2 | |
| 6796609 | GAGE ,SETTING,COMPRESSOR CASE BORING FIXTURE | 1 | |
| 6796747 | COMBUSTION LINER ASSEMBLY BRAZE FIXTURE | 1 | |
| 6796761 | Comp Stator Vane Corrugated Seal fixture | 1 | |
| 6796764 | Fixture Assy Corrugated seal | 2 | |
| 6796774 | FIXTURE -SETTING, FUEL CUTOFF ROD ASSEMBLY | 2 | |
| 6796793 | COMBUSTION LINER ASSEMBLY CHECKING FIXTURE | 1 | |
| 6796794 | COMBUSTION LINER ASSEMBLY SAW FIXTURE | 1 | |
| 6796795 | FIXTURE, HOLDING, COMBUSTION LINER ASSEMBLY | 1 | |
| 6796984 | INLET CASE PRESSURE TEST FIXTURE | 1 | |
| 6797197 | SETTING FIXTURE - FUEL CONTROL | 1 | |
| 6797375 | FIXTURE, SAW, COMBUSTION LINER ASSEMBLY | 1 | |
| 6797530 | Fixture-Setting | 1 | |
| 6798037 | FIXTURE FUEL NOZZLE ASEEMBLY | 2 | |
| 6798227 | FIXTURE, CHECKING, COMPRESSOR VANE ASSEMBLY | 1 | |
| 6798776 | FIXTURE - SELECTOR, DIFFUSER VENT ORIFICE | 1 | |
| 6798787 | FIXTURE-COMPRESSOR DISCHARGE AIR TUBE ASSEMBLY PRESSURE CHECK | 1 | |
| 6799596 | FIXTURE -INSTALLATION, SPEED SENSITIVE CONTROL SEAL | 2 | |
| 6799630 | COMP. RTR LAYBRINTH STATOR SEAL CHECKING FIXTURE | 1 | |
| 6799780 | Igniter Ferrule Mount Assembly Fixture | 1 | |
| 6799891 | FIXTURE, WELDING DIFFUSER | 1 | |
| 6799955 | FIXTURE - ASSEMBLY | 2 | |
| 6799955-100 | FIXTURE - ASSEMBLY | 2 | |
| 68482-101 | PACKING FIXTURE BASE ASSEMBLY | 1 | |
| 68637-101 | HEIGHT CHECK FIXTURE BASE | 1 | |
| 68647-103 | PACKING FIXTURE ASSEMBLY | 1 | |
| 68662-101 | HEIGHT CHECK FIXTURE BASE | 1 | |
| 68676-101 | PACKING FIXTURE INSERT | 1 | |
| 68678-101 | PACKING FIXTURE INSERT | 1 | |
| 6872162 | FIXTURE PRESSURE TEST SUMP ASSEMBLY | 1 | |
| 6872164 | FIXTURE CONCENTRICITY TURBINE GAS PRODUCER ROTOR ASSEMBLY ADAPTER | 1 | |
| 6872288 | FIXTURE - INSTALLATION AND REMOVAL, STARTER SHAFT SEAL | 1 | |
| 6872482 | FIXTURE - SETTING | 1 | |
| 6872535 | FIXTURE ALIGNMENT COMBUSTION LINER AFT SECTION | 1 | |
| 6872536 | FIXTURE POSITIONING COMBUSTION LINER AFT SECTION | 1 | |
| 6872632 | FIXTURE - MACHINING, COMPRESSOR CASE | 1 | |
| 6872680 | FIXTURE SELECTOR DIFFUSER VENT ORIFICE | 2 | |
| 6872805 | FIXTURE - STRESS RELIEVE, COMPRESSOR CASE ASSY | 1 | |
| 6872880 | FIXTURE----CHECKING, COMPRESSOR MOUNTING INSERTS (GEARBOX) | 1 | |
| 6872936 | ADAPTER - SERIES 1 1ST STAGENOZZLE FIXTURE | 1 | |
| 6872937 | FIXTURE----HOLDING, SERIES I AND II 1ST STAGE NOZZLE | 1 | |
| 6872938 | FIXTURE----HOLDING, SERIES I AND II 2ND STAGE NOZZLE | 1 | |
| 6872941 | FIXTURE - HOLDING SERIES 2 4TH STAGE | 1 | |
| 6872943 | FIXTURE - HOLDING, SERIES 2 3RD STAGE | 1 | |
| 6872945 | ADAPTER----SERIES II 3RD AND 4TH STAGE NOZZLE FIXTURES | 1 | |
| 6872948 | FIXTURE----HOLDING, SERIES II 3RD STAGE NOZZLE SHOT PEENING | 1 | |
| 6877003 | TURNING FIXTURE, SUPPORT MOUNTING FLANGE HOLDS FUEL NOZZLE FOR MACHINING OF MOUNTING FLANGE SEAL SURFACE. | 1 | |
| 6877011 | HOLDING FIXTURE, FINAL TEST HOLDS FUEL NOZZLE/COMPONENTS ON SPRAY CHAMBER DURING ASSEMBLY AND TESTING. | 1 | |
| 6877016 | PURGING AND HEAT SINK FIXTURE (FOR NOZZLES PROVIDES ARGON PURGE CONNECTION WITH WEAR SLEEVES) AND DISSIPATES HEAT DURING SECONDARY BODY WELDING PROCEDURE. | 1 | |
| 6877017 | PURGING AND HEAT SINK FIXTURE (FOR NOZZLES PROVIDES ARGON PURGE CONNECTION WITHOUT WEAR SLEEVES) AND DISSIPATES HEAT DURING SECONDARY BODY WELDING PROCEDURE. | 1 | |
| 6877021 | SEAL FIXTURE SECONDARY ORIFICE | 1 | |
| 6877022 | IN-PROCESS INSPECTION FIXTURE USED TO MEASURE CRITICAL DIMENSIONS DURING DISASSEMBLY AND REPAIR OPERATIONS. | 1 | |
| 6877024 | TACK WELD FIXTURE PRIMARY AND SECONDARY BODY | 1 | |
| 6877025 | SEAL RING ADAPTER FIXTURE VALVE END | 1 | |
| 6877029 | LEAK TEST FIXTURE, CARTRIDGE VALVE HOLDS CARTRIDGE VALVE FOR CHECKING VALVE SEAL. | 1 | |
| 6877108 | ASSEMBLY FIXTURE | 1 | |
| 6877123 | Fixture – Assembly, Nozzle Inle. | 1 | |
| 6887000 | PRESSURE DECAY TEST FIXTURE CHECKS PRESSURE LOSS THROUGH CHECK VALVE SEAT. | 1 | |
| 68932-097-1 | FIXTURE-SETTING | 1 | |
| 6893360 | FIXTURE - ASSEMBLY, COMPRESSOR | 2 | |
| 6893376 | ATTACHING GAS PRODUCER TURBINE ASSEMBLY FIXTURE AD | 2 | |
| 6893380 | FIXTURE - SELECTOR, DIFFUSER VENT ORIFICE | 1 | |
| 6893737 | FIXTURE - SELECTOR, DIFFUSER VENT ORIFICE | 1 | |
| 6897101 | TEST FIXTURE, INLET PLUG PROVIDES SEPARATE PRIMARY AND SECONDARY INLET FLUID CONNECTIONS DURING SUPPORT TESTING. | 1 | |
| 6897102 | PRIMARY SUPPORT RING FIXTURE LOCATES AND SEALS PRIMARY TO SUPPORT JOINT DURING PREWELD TESTING. | 1 | |
| 6897103 | HOLDING FIXTURE TIP SEAL | 1 | |
| 6897104 | SEAL FIXTURE PRIMARY ORIFICE | 1 | |
| 23033026 | NUT CLAMP COMPRESSOR ROTOR ASSEMBLY FIXTURE | 2 | |
| 23033036 | FIXTURE--SEPARATING, COMPRESSOR WHEEL | 1 | |
| 23033043 | FIXTURE--HOLDING, SERIES II 4TH STAGE NOZZLE | 1 | |
| 23034394 | FIXTURE--RETAINING, COMPRESSOR ROTOR BALANCE USED | 1 | |
| 23037978 | FIXTURE BLAST, COMPRESSOR FOURTH-STAGE VANE AND BAND ASSEMBLY | 1 | |
| 23037982 | FIXTURE--HOLDING, COMPRESSOR FIRST-, SECOND-, THIRD-, AND FOURTH-STAGE VANE ASSEMBLY | 1 | |
| 23037983 | FIXTURE--BLAST, COMPRESSOR FIRST-STAGE VANE AND BAND ASSEMBLY | 1 | |
| 23037984 | FIXTURE--BLAST, COMPRESSOR SECOND-STAGE VANE AND BAND ASSEMBLY | 1 | |
| 23037985 | FIXTURE--BLAST, COMPRESSOR THIRD-STAGE VANE AND BAND ASSEMBLY | 1 | |
| 23037987 | FIXTURE--SPRAY, COMPRESSOR CASE | 1 | |
| 23051156 | FIXTURE – CONCENTRICITY, COMPRESSOR ROTOR - SUPERSEDES 6897434 | 2 | |
| 23051176 | Fixture – Assembly, Spur Assembly Gear-shaft | 2 | |
| 23051180 | FIXTURE, INST, PROP SHAFT SEAL | 3 | |
| 23052541 | Fixture – Holding, Inner Gas Generator Case Assembly | 1 | |
| 23053680 | Fixture – Assembly, Wheel 2nd & 3rd Stage, Low Pressure Turbine Rotor | 1 | |
| 23053681 | Fixture – Assembly Wheel 1st Stage, Forward & Aft Shaft, LPT Rotor | 1 | |
| 23054823 | Fixture – Grinding, Turbine Cased Blade Track | 1 | |
| 23054848 | Fixture – Grinding, Offset Gas Generator Blade track Grinding | 1 | |
| 23055289 | Fixture – Buildup, 1st Stage Vane And Support Assembly | 1 | |
| 23055718 | Fixture – Flow Test, No. 7 Carbon Seal | 1 | |
| 23055719 | Fixture – Flow Test, No. 6 Carbon Seal | 1 | |
| 23055720 | Fixture – Flow Test, No. 5 Carbon Seal | 1 | |
| 23055721 | Fixture – Flow Test, No. 4 Carbon Seal | 1 | |
| 23055763 | Fixture – Holding, Turbine Wheel Assembly Grind Fixture | 1 | |
| 23055791 | Fixture – Flow Test, No. 0 Carbon Seal | 1 | |
| 23058405 | Fixture – Arbor Press, Separate Damper From No. 5 Bearing | 1 | |
| 23058454 | Fixture – Turntable, Compressor Case Assembly | 1 | |
| 23058483 | Fixture – Alignment, 2nd Stage Vane Ring To Case | 1 | |
| 23058496 | Fixture – Compressor Case, Lathe Holding | 1 | |
| 23060615 | Fixture – Inspection, Turbine Vane Cases | 1 | |
| 23060655 | Fixture – Flow Test, No. 6 Carbon Seal | 1 | |
| 23060731 | Fixture – Grind, Center Sump Forward Labyrinth Seal | 1 | |
| 23060772 | Fixture – Grinding, Rear Stationary Seal | 1 | |
| 23060774 | Fixture – Grinding, Air Seal, Rear Center Sump | 1 | |
| 23063510 | Fixture – Balance, Compressor Wheel Assembly | 1 | |
| 23063518 | Fixture – Pull Test, Outer Bypass Duct Insert | 1 | |
| 23063520 | Fixture – Holding, Rear Stationary Seal | 1 | |
| 23068488 | Fixture – Grinding, Air Seal, Rear Compressor | 1 | |
| 23068591 | Fixture – Flow Test No. 6 Carbon Seal | 1 | |
| 23068592 | Fixture – Flow Check No. 5 Carbon Seal | 1 | |
| 23068617 | Fixture – Flow Check No. 4 Carbon Seal | 1 | |
| 23076508 | Fixture – Flow Check No. 4 Carbon Seal | 1 | |
| 39376301 | ASSEMBLY FIXTURE | 1 | |
| 63040014 | Cycling and set-up fixture | 1 | |
| 63041017 | ASSEMBLY FIXTURE NLG | 1 | |
| 460002873 | SETTING FIXTURE | 1 | |
| 460005205 | SETTING FIXTURE | 1 | |
| 460005845 | SETTING AND HOLDING FIXTURE | 1 | |
| 460005887 | SETTING FIXTURE | 1 | |
| 460006457 | SETTING FIXTURE | 1 | |
| 460006502 | SETTING FIXTURE | 1 | |
| 460006581 | SETTING FIXTURE | 1 | |
| 460006958 | SETTING FIXTURE | 1 | |
| 460006963 | ASSEMBLY FIXTURE | 1 | |
| 460007086 | SETTING FIXTURE | 1 | |
| 460007130 | TARGET SETTING FIXTURE | 1 | |
| 460007131 | FIXTURE PISTON ASSEMBLY | 1 | |
| 460007134 | Fixture, Cylinder Assembly | 1 | |
| 4600067296 | ASSEMBLY FIXTURE | 1 | |
| 18901810000 | SYNCHROTEL NULL SETTING FIXTURE | 1 | |
| 6895995-3 | Fixture Allignment Compresser Holder | 1 | |
| 69-35665-F1 | Assembly Fixture | 1 | |
| 6SV-86665 | Assembly Fixture | 1 | |
| 6SV-93326 | Assembly Fixture | 1 | |
| 6SV-94795 | Assembly Fixture | 1 | |
| 6SV-95030 | Assembly Fixture | 1 | |
| 6SV86665 | ASSEMBLY FIXTURE | 1 | |
| 6SV95030 | ASSEMBLY FIXTURE | 1 | |
| 7-363100003 | FIXTURE ASSEMBLY, ST | 1 | |
| 70641311-1 | GSE 063 - FIXTURE,LIFTING-ENGINE | 1 | |
| 70700-20675-041 | NULLING FIXTURE ASSEMBLY, SAS ACTUATOR | 1 | |
| 71030013 | 12613.3-SEPARATING FIXTURE | 1 | |
| 71915-101 | PACKING FIXTURE INSERT | 1 | |
| 74177AF2 | ASSEMBLY FIXTURE | 1 | |
| 74194TF3-101 | FIRST STAGE SETUP FIXTURE | 1 | |
| 74194TF3-102 | FIRST STAGE SETUP FIXTURE | 1 | |
| 7500-00142-3 | ASSEMBLY AND TEST FIXTURE | 1 | |
| 7637987-19 | CUSTOM SPO-2664 SLIDING PROBE FIXTURE USED WITH DC-10 REFERENCE STANDARD 7637987-15 Includes Certificate of Conformance | 1 | |
| 767 PM | ASSEMBLY FIXTURE | 1 | |
| 79000132-1 | PRESSURE TEST FIXTURE ASSEMBLY | 1 | |
| 7C2021 | FIXTURE - RUN OUT- CDP SEAL/HP TURB ROTOR | 1 | |
| 7C2142G01 | FIXTURE, REMOVAL - SEAL LPT AFT INNER | 1 | |
| 7J10030TXG | BULLNOSE HANDLING FIXTURE | 1 | |
| 80005-897 | FIXTURE SET AIRCRAFT MAINTENANCE | 1 | |
| 800114-S51-2 | REGULATOR ASSEMBLY FIXTURE | 1 | |
| 802-0144 | RSU BASE SCR-500 CVR Audio Breakout Fixture | 1 | |
| 802-0167 | RSU BASE MCR-500 CVR Audio Breakout Fixture | 1 | |
| 807801-S57-1 | OUTLET AND TOP COVER ASSEMBLY INSTALLATION FIXTURE | 1 | |
| 80T1801 | ASSEMBLY FIXTURE, THRUST REVERSER | 1 | |
| 80T2751 | UPPER LOWER DOOR FIXTURE THRUST REVERSER | 3 | |
| 810-45-135030-9 | SERIES REFERENCE: 1077. NOMENCLATURE: TRIM TAB FREE PLAY CHECK FIXTURE. SPECIFICATIONADDITIONAL DATA: LOCAL MANUFACTURE PER APPROPRIATE MM ATA 27 AS ALTERNATE TOOL. CALIBRATED DIAL INDICATOR MUST BE WITH UNIT FOR USE. ATA: 270055 | 1 | |
| 81205135 | ROTOR ASSEMBLY PILOT FIXTURE | 1 | |
| 81268100 | WELDING FIXTURE ASSY FOR HERMEIC SEAL DISC ASSEMBLIES | 4 | |
| 81996-13083230 | HOLDING FIXTURE ASSEMBLY (PNVS) | 1 | |
| 82640AF1 | PRE-SET FIXTURE | 1 | |
| 830-8175-001 | TEST FIXTURE ASSEMBLY | 1 | |
| 830006-809-00682 | ASSEMBLY & DISASSEMBLY FIXTURE GEARBOX BEV/PIN | 1 | |
| 833054-1 | FUEL NOZZLE HOLDER FIXTURE ASSEMBLY | 1 | |
| 833110-12 | FIXTURE, SEAL PRESSING | 1 | |
| 833126-1 | BEARING ASSEMBLY FIXTURE | 1 | |
| 833189-1 | ASSEMBLY FIXTURE | 1 | |
| 833202-1 | SET FIXTURE BEARING PRESSING | 1 | |
| 833431-1 | LIFT FIXTURE POWER SECTION | 2 | |
| 833431-2 | FIXTURE,LIFT-POWER SECTION | 1 | |
| 833433-1 | Pneumatic Drive Rivet Set Fixture | 1 | |
| 833543-1 | FIXTURE ASSEMBLY SEAL PRESS | 1 | |
| 833544-1 | FIXTURE REMOVAL SEAL | 1 | |
| 833667-1 | FIXTURE INSTALLATION AND REMOVAL SEAL | 1 | |
| 833667-2 | Seal Installation&Removal fixture | 1 | |
| 833669-1 | Actuator Assembly Fixture | 1 | |
| 834044-1 | FIXTURE SEAL REMOVAL | 1 | |
| 834332-1 | Seal Removal Fixture | 1 | |
| 834349-1 | Seal Assembly Fixture | 1 | |
| 834383-1 | Rotor Seal Installation Fixture | 1 | |
| 834384-1 | VALVE ASSEMBLY HOLDING FIXTURE (HOLDING TOOL) | 1 | |
| 834417-1 | HOLDING FIXTURE ASSEMBLY | 1 | |
| 834424-1 | Assembly And Check Fixture | 1 | |
| 834443- | SEAL REMOVAL FIXTURE | 1 | |
| 834447-1 | SEAL REMOVAL FIXTURE | 1 | |
| 834769-1 | FIXTURE REMOVAL DIFFUSER | 1 | |
| 834846-1 | SENSOR TEST FIXTURE | 1 | |
| 835036-1 | Assembly Fixture | 1 | |
| 835064-1 | Rod End Set Fixture | 1 | |
| 835207-1 | ASSEMBLY FIXTURE | 1 | |
| 835207-1PM | ASSEMBLY FIXTURE | 1 | |
| 835224 -1 | SEAL REMOVAL FIXTURE | 1 | |
| 835224-1 | SEAL REMOVAL FIXTURE | 1 | |
| 835291-1 | ASSEMBLY FIXTURE | 1 | |
| 835359-1 | WELDING AND ASSEMBLY FIXTURE | 1 | |
| 835558-1 | SEAL REMOVA FIXTURE | 1 | |
| 835741-1 | Assembly Fixture | 1 | |
| 835801-1 | Seal Press Fixture | 1 | |
| 835807-1 | Gear Hub Assembly Fixture | 1 | |
| 83710279 | ASSEMBLY FIXTURE | 1 | |
| 854004-13 | PRELOAD FIXTURE EQUIPMENT - STRUT, PW2000 SERIES ENGINES | 1 | |
| 85424001-001-58 | ALIGNMENT FIXTURE - MLG SENSOR/TARGET BRACKET | 1 | |
| 85424001-001-58-1 | ALIGNMENT FIXTURE - MLG SENSOR/TARGET BRACKET | 1 | |
| 85424076-105-58 | ALIGNMENT FIXTURE, MLG SENSOR BRKT | 2 | |
| 85694200G04 | FIXTURE INSPECTION - COMBUSTOR ASSEMBLY (INSPECTION FIXTURE) | 1 | |
| 856A 2377G01 | FIXTURE CENTERING & HANDELING ROTATIONAL SEAL | 1 | |
| 856A 2382G03 | FIXTURE HANDELING LPT. CASE | 1 | |
| 856A 2383G03 | FIXTURE ASSEM./DISASSEM.LPT ROTOR | 2 | |
| 856A 2411G01 | FIXTURE ASSEMBLY STAGE 2,3,4,5 NOZZLE SEGMENT | 1 | |
| 856A1008G01 | Lift Fixture- see G03 | 1 | |
| 856A1008G02 | Lift Fixture- see G03 | 3 | |
| 856A1019 | FIXTURE, VERTICAL LIFT - COMBUSTION CASE ASSEMBLY, AFT | 1 | |
| 856A1019 G04 | Fixture Vertical Lift ‐ Comb Case Assy Aft | 9 | |
| 856A1019G02 | FIXTURE, VERT LIFT COMBUSTION CASE | 1 | |
| 856A1019G04 | FIXTURE, VERTICAL LIFT - COMBUSTION CASE ASSEMBLY, AFT | 9 | |
| 856A1021 | FIXTURE, LIFT AND TURN - COMPRESSOR ROTOR ASSEMBLY FORWARD END | 1 | |
| 856A1021G02 | FIXTURE LIFT AND TURN C/R ASSEMBLY FWD END | 11 | |
| 856A1041G04 | FIXTURE, CENTERING - HPTR TO COMBUSTION CASE | 1 | |
| 856A1047G03 | Fixture Hold IGB Module Use W/1048 | 3 | |
| 856A1055G01 | FIXTURE SET GRIND SPACER C/S STAGE 4-9 LINERS | 1 | |
| 856A1056G03 | FIXTURE, GRIND - COMPRESSOR STATOR FLOW PATH (GRIND FIXTURE) NOT ESSENTIAL TO START | 1 | |
| 856A1056G04 | FIXTURE, GRIND -COMPRESSOR STATOR CASE - FLOWPATH | 5 | |
| 856A1056G05 | FIXTURE, GRIND - COMPRESSOR STATOR FLOW PATH (GRIND FIXTURE) NOT ESSENTIAL TO START | 8 | |
| 856A1057 | FIXTURE, LIFT AND TURN - HPT ROTOR ASSEMBLY, AFT | 1 | |
| 856A1057G03 | FIXTURE, LIFT AND TURN - HPT ROTOR ASSEMBLY, AFT | 7 | |
| 856A1057G04 | FIXTURE, LIFT AND TURN - HPT ROTOR ASSEMBLY, AFT | 8 | |
| 856A1057G05 | FIXTURE, LIFT AND TURN - HPT ROTOR ASSEMBLY, AFT | 1 | |
| 856A1061G03 | Fixture Lift/Turn Disk & Seal Fwd | 7 | |
| 856A1092P01 | FIXTURE, HOLDING - HPT AFT OUTER SEAL (HOLDING FIXTURE) | 1 | |
| 856A1095 G04 | FIXTURE, ASSEMBLY - HPT NOZZLE ASSEMBLY | 3 | |
| 856A1095 G04 | Fixture, Assembly - HPT Nozzle Assembly | 3 | |
| 856A1095G01 | FIXTURE, ASSEMBLY - HPT NOZZLE ASSEMBLY | 1 | |
| 856A1095G04 | Assembly Fixture | 3 | |
| 856A1099 | FIXTURE, INSTALLATION AND REMOVAL - HPT AFT OUTER AIR SEAL | 1 | |
| 856A1099 G01 | Fixture Install/Removal ‐ HPT Aft Outer Air Seal | 6 | |
| 856A1099G01 | FIXTURE INSTALL/REMOVAL HPT AFT OUTER AIR SEAL | 6 | |
| 856A1099P01 | FIXTURE, INSTALL/REMOVAL - HPT AFT OUTER AIR SEAL (INSTALL/REMOVAL FIXTURE) | 1 | |
| 856A1103 | FIXTURE, LIFT - HPT NOZZLE ASSEMBLY (LIFT FIXTURE) | 2 | |
| 856A1103 G01 | Lift-HPT Nozzle Assembly Fixture | 8 | |
| 856A1103G01 | FIXTURE LIFT-HPT NOZZLE ASSEMBLY | 8 | |
| 856A1125G01 | FIXTURE, LIFT-CG ADJUSTABLE, GENERAL PURPOSE | 5 | |
| 856A1141G03 | Fixture Set Insp. | 1 | |
| 856A1141G04 | Fixture Set Radiograph | 1 | |
| 856A1141G06 | Fixture Set Radiograph | 1 | |
| 856A1157 | FIXTURE, LIFT-VARIABLE C G GEN. PURPOSE, HEAVY | 1 | |
| 856A1157 G01 | Fixture Lift ‐ Variable CG General Purpose | 5 | |
| 856A1157 G02 | FIXTURE, LIFT - VARIABLE CG GENERAL PURPOSE, HEAVY | 8 | |
| 856A1157 REV J | FIXTURE, LIFT-VARIABLE C G GEN. PURPOSE, HEAVY | 1 | |
| 856A1157G01 | FIXTURE, LIFT-VARIABLE C G GEN. PURPOSE, HEAVY | 5 | |
| 856A1157G02 | Fixture, Lift - Variable CG General Purpose, Heavy (CG lift fixture) | 8 | |
| 856A1169G02 | FIXTURE, LIFT-HP COMP STATOR FWD CASE ASSY | 4 | |
| 856A1171 | FIXTURE, PRESS TEST NO 3 BRG AFT AIR/OIL SEAL | 1 | |
| 856A1171G03 | FIXTURE, PRESS TEST, #3 BRG AFT AIR/OIL SEAL | 1 | |
| 856A1171G05 | FIXTURE, PRESSURE TEST - SEAL, STATIONARY, NO. 3 BEARING AFT (PRESSURE TEST FIXTURE) | 1 | |
| 856A1171G06 | FIXTURE, PRESS TEST, #3 BRG AFT AIR/OIL SEAL | 2 | |
| 856A1195 | FIXTURE, ASSEMBLY - HPC ROTOR STAGE 1 AND 2 SPOOL TO FWD SHAFT | 1 | |
| 856A1195G02 | Assembly Fixture | 4 | |
| 856A1196 | FIXTURE, VERT LIFT & TURN COMBUSTION CASE ASSY - FWD FLANGE | 1 | |
| 856A1196G01 | FIXTURE, LIFT AND TURN - COMB CASE FWD (LIFT AND TURN FIXTURE) | 1 | |
| 856A1196G02 | FIXTURE, LIFT AND TURN - COMB CASE FWD (LIFT AND TURN FIXTURE) | 4 | |
| 856A1196G03 | Fixture, Lift and Turn - Comb Case Fwd (lift and turn fixture) | 5 | |
| 856A1208G01 | Assembly Fixture | 1 | |
| 856A1209 | Assembly Fixture | 1 | |
| 856A1211G01 | Fixture, Clamping - No. 3 Bearing Assembly, Inlet Gearbox (clamping fixture) | 9 | |
| 856A1225G01 | Base, Support - HPT Rotor Buildup/Runout Fixture (support base) | 7 | |
| 856A1281G02 | FIXTURE LIFT HPT FRONT OUTER SEAL | 5 | |
| 856A1295G02 | FIXTURE - ALIGNMENT - CDP SEAL BOLT EROSION SHIELD | 5 | |
| 856A1342 | FIXTURE, PRESEAT - VSV LEVER ARMS | 1 | |
| 856A1342G01 | Fixture Preseat VSV | 7 | |
| 856A1344 | FIXTURE-SET UP CORE | 1 | |
| 856A1344G01 | Fixture Set-up Core/HCPR | 1 | |
| 856A1344G02 | Fixture Set Up Core/HPCR | 7 | |
| 856A1344G02 | FIXTURE,SETUP-CORE HPC ROTOR BUILDUP | 7 | |
| 856A1374 | FIXTURE, INSTALL/REMOVE - AIR SEAL IGB (FIXTURE) | 1 | |
| 856A1374G02 | FIXTURE, I/R - AIR SEAL, IGB | 2 | |
| 856A1377G01 | FIXTURE, LIFT AND TURN - HPTS/LPTN ASSEMBLY | 2 | |
| 856A1377G02 | FIXTURE, LIFT AND TURN - HPTS/LPTN ASSEMBLY (LIFT AND TURN FIXTURE) | 10 | |
| 856A1381 | FIXTURE LIFT TURN SUPPORT ASSEMBLY | 1 | |
| 856A1381G02 | FIXTURE LIFT TURN SUPPORT ASSEMBLY | 3 | |
| 856A1394 | FIXTURE, LIFT - C G ADJUSTABLE, GENERAL PURPOSE | 1 | |
| 856A1394 G03 | FIXTURE, LIFT-CG ADJUSTABLE, GENERAL PURPOSE | 11 | |
| 856A1394G01 | FIXTURE - LIFT ADJ C/G GEN PURPOSE | 2 | |
| 856A1394G02 | FIXTURE - LIFT ADJ C/G GEN PURPOSE | 3 | |
| 856A1394G03 | Fixture, Lift-CG Adjustable, General Purpose (CG lift fixture) | 11 | |
| 856A1394G03 | FIXTURE - LIFT ADJ C/G GEN PURPOSE | 11 | |
| 856A1412 | FIXTURE, ASSEMBLY/ DISASSEMBLY - HPT NOZZLE ASSY, STG 0 | 1 | |
| 856A1412G06 | Fixture, Assembly/Disassembly - HPT Nozzle Assy, Stg 1 (assembly/disassembly fixture) | 6 | |
| 856A1421 | FIXTURE, LIFT-HP COMPR. STATOR CASE, FRONT ASSY | 1 | |
| 856A1421 G01 | Fixture Lift ‐ HP Compressor Case Front Stator | 10 | |
| 856A1421 REV B | FIXTURE, LIFT-HP COMPR. STATOR CASE, FRONT ASSY | 1 | |
| 856A1421G01 | FIXTURE, LIFT - HP COMP STATOR CASE FRONT ASSY | 10 | |
| 856A1421G01 | FIXTURE, LIFT HPC STATOR FWD CASE | 10 | |
| 856A1421G02 | FIXTURE, LIFT - HP COMPRESSOR STATOR CASE FRONt | 9 | |
| 856A1421G02 | FIXTURE LIFT HP COMPR STATOR CASE | 9 | |
| 856A1424 | FIXTURE, LIFT - COMBUSTOR ASSEMBLY VERTICAL AND HORIZONTAL | 1 | |
| 856A1424G01 | Fixture, Lifting See G04 | 1 | |
| 856A1424G02 | Lifting Fixture- See G04 | 1 | |
| 856A1424G03 | FIXTURE, LIFT - COMBUSTOR ASSEMBLY VERTICAL AND HORIZONTAL | 2 | |
| 856A1424G04 | Fixture, Lift - Combustor Assembly - Vertical and Horizontal (lift fixture) | 10 | |
| 856A1431 | FIXTURE, RESTRAINING - HPT NOZZLE ASSEMBLY (RESTRAINING FIXTURE) | 1 | |
| 856A1431G01 | FIXTURE, RESTRAINING - HPT NOZZLE ASSEMBLY (RESTRAINING FIXTURE) | 1 | |
| 856A1431G02 | FIXTURE, RESTRAINING - HPT NOZZLE ASSEMBLY (RESTRAINING FIXTURE) | 1 | |
| 856A1431G03 | Fixture, Restraining - HPT Nozzle Assembly (restraining fixture) | 7 | |
| 856A1451P01 | FIXTURE HOLDING SEAL | 1 | |
| 856A1478 | FIXTURE, REMOVAL NO. 3 BRG. AFT STATIONARY SEAL | 1 | |
| 856A1478 REV A | FIXTURE, REMOVAL NO. 3 BRG. AFT STATIONARY SEAL | 1 | |
| 856A1499G01 | Fixture Ins/Rem Air Seal | 1 | |
| 856A1517G01 | FIXTURE, LIFT-COMBUSTION CASE | 1 | |
| 856A1602G01 | FIXTURE, CHILL - HPT ROTOR BLADE AFT BLADE RETAINER (CHILL FIXTURE) THE CHILL FIXTURE IS USED TO HOLD DRY ICE AGAINST THE AFT HPT ROTOR DISK BLADE RETAINER, DURING DISASSEMBLY, TO RELEASE THE INTERFERENCE FIT BETWEEN THE RETAINER AND THE HPT DISK | 6 | |
| 856A1603 | FIXTURE, I/R - HPTR FWD OUTER SEAL | 1 | |
| 856A1603G03 | FIXTURE, INSTALL/REMOVE - HPT ROTOR FWD OUTER SEAL | 3 | |
| 856A1603G05 | FIXTURE, I/R -HPTR FWD OUTER SEAL | 2 | |
| 856A1603G07 | FIXTURE, I/R -HPTR OUTER SEAL (CONFIG | 2 | |
| 856A1603G08 | FIXTURE, I/R -HPTR FWD OUTER SEAL | 3 | |
| 856A1621 | FIXTURE,LIFT I/R HPTR FWD SEAL | 1 | |
| 856A1621G01 | Fixture, Lift - Fixture Install/Remove, HP Turbine Rotor Forward Outer Seal (lift fixture) | 3 | |
| 856A1812 | FIXTURE, ASSEMBLY/DISASSEMBLY HPT NOZZLE STG 1 (HPT NOZZLE ASSEMBLY/DISASSEMBLY FIXTURE) | 1 | |
| 856A1812G01 | FIXTURE, ASSEMBLY/DISASSEMBLY - HPT NOZZLE, STAGE 1 (FIXTURE) | 1 | |
| 856A1812G02 | Fixture, Assembly/ Disassembly - HPT Nozzle, Stage 1 (fixture) | 8 | |
| 856A1818 | FIXTURE, SEATING, CK CORE | 2 | |
| 856A1826 | FIXTURE, REMOVAL - NO. 3 BEARING AFT STATIONARY SEAL (REMOVAL FIXTURE) | 1 | |
| 856A1826G01 | Fixture, Install/Remove - No. 3 Stationary Air Seal (fixture) | 3 | |
| 856A1838G01 | FIXTURE, PULLER HPT FWD SHAFT (SEAL) | 4 | |
| 856A1839 | FIXTURE, DISASSEMBLY - HPT/ HP COMPRESSOR ROTOR | 1 | |
| 856A1839G01 | FIXTURE, DISASSEMBLY-HPT/HP | 8 | |
| 856A1845G01 | FIXTURE, ALIGNING- HIGH PRESSURE COMPRESSOR TO HOLD HP COMPRESSOR VANE SECTOR WHILE INSTALLING AND REMOVING SEALS | 3 | |
| 856A1845G02 | FIXTURE, HOLDING - VANE SECTOR | 3 | |
| 856A1845G03 | FIXTURE, HOLDING - VANE SECTOR | 5 | |
| 856A1868 | FIXTURE, INSTALL/REMOVE-HP TURB ROTOR FWD OUTER SEAL | 1 | |
| 856A1868G01 | Fixture Install/Remove - HPTR Forward Outer Seal | 4 | |
| 856A1868G02 | FIXTURE, INSTALL/REMOVE-HP TURB ROTOR FWD OUTER SEAL | 1 | |
| 856A1868G03 | FIXTURE, INSTALL/REMOVE-HP TURB ROTOR FWD OUTER SEAL | 3 | |
| 856A1874 | FIXTURE ASSEMBLY, RUNOUT-TURBINE ROTOR | 1 | |
| 856A1874G01 | FIXTURE ASSEMBLY, RUNOUT - TURBINE ROTOR | 2 | |
| 856A2323G01 | FIXTURE, ASSEMBLY/DISASSEMBLY - FAN AND BOOSTER (ASSEMBLY/DISASSEMBLY FIXTURE) | 1 | |
| 856A2340G01 | FIXTURE, TORQUE/LOOSEN - NO. 1 BEARING NUT | 3 | |
| 856A2360G01 | FIXTURE, HOIST/HANDLING - LPT ROTOR/STATOR ASSEMBLY,(HANDLING FIXTURE)OBSELETE REPLACED BY 856A2359G02_C | 1 | |
| 856A2360G02 | FIXTURE,HOIST/HANDLING -LPT ROTOR AASEMBLY | 3 | |
| 856A2377G01 | FIXTURE CENTERING & HANDELING ROTATIONAL SEAL | 1 | |
| 856A2382G01 | FIXTURE, HANDLING AND TURN - LPT CASE (HANDLING AND TURN FIXTURE)OBSELETE REPLACED BY 856A2382G03_E | 1 | |
| 856A2382G03 | FIXTURE HANDELING LPT CASE | 1 | |
| 856A2383G02 | FIXTURE, ASSEMBLY/DISASSEMBLY - LPT ROTOR AND STATOR (ASSEMBLY/DISASSEMBLY FIXTURE)OBSELETE REPLACED BY 856A2383G03_F | 1 | |
| 856A2383G03 | FIXTURE ASSEM./DISASSEM.LPT ROTOR | 2 | |
| 856A2387G02 | FIXTURE,TURNNION-LPT.CONICAL ROTOR SUPPORT & STAGE 4DISK ASSEM | 1 | |
| 856A2409G02 | REMOVAL FIXTURE - LPT STG 1 OUTER STA AIR SEAL | 2 | |
| 856A2411G01 | FIXTURE ASSEMBLY STG 2, 4, 4, 5 NOZZLE SEGMENT | 1 | |
| 856A2705G01 | FIXTURE, REMOVAL/INSTALLATION AND HANDLING - BOOSTER ROTOR/STATOR ASSEMBLY | 1 | |
| 856A2705G02 | FIXTURE, HANDLING - BOOSTER ROTOR/STATOR ASSEMBLY. | 3 | |
| 856A2705G03 | FIXTURE, HANDLING-BOOSTER ROTOR/STATOR ASSEMBLY | 4 | |
| 856A2713G06 | LPT ASSEMBLY FIXTURE | 1 | |
| 856A2719G03 | FIXTURE HANDLING LPT CASE | 12 | |
| 856A2729 | FIXTURE, HANDLING/TURN - LPT CASE | 1 | |
| 856A2729G01 | Fixture Handle LPT Case | 1 | |
| 856A2729G02 | FIXTURE HANDLING LPT CASE AT SHROUD SUPT | 6 | |
| 856A2729G03 | HANDLING FIXTURE - LPT CASE | 1 | |
| 856A2730G03 | FIXTURE, ASSEMBLY/DISASSEMBLY- LPT ROTOR/STATOR (ASSEMBLY/DISASSEMBLY FIXTURE) | 3 | |
| 856A2750G02 | FIXTURE TO DISASSEMBLE T1,2,3,4 BLADES | 5 | |
| 856A2762G02 | Fixture - Balance Baseplate (balance baseplate) | 1 | |
| 856A2903G01 | FIXTURE, HANDLING - BOOSTER ROTOR/STATOR ASSEMBLY (HANDLING FIXTURE) | 11 | |
| 856A2904 | FIXTURE, HANDLING - BOOSTER ROTOR/STATOR ASSEMBLY | 1 | |
| 856A2904G01 | FIXTURE, HANDLING - BOOSTER ROTOR/STATOR ASSEMBLY | 3 | |
| 856A2904G02 | FIXTURE, HANDLING - BOOSTER ROTOR/STATOR ASSEMBLY | 7 | |
| 856A2912 | FIXTURE, ASSEMBLY/DISASSEMBLY - FAN BOOSTER (DISK SUPPORT) | 1 | |
| 856A2912G01 | Fixture, Assembly/Disassembly - Fan Booster (disk support) | 1 | |
| 856A2912G02 | FIXTURE, ASSEMBLY/DISASSEMBLY - FAN BOOSTER (DISK SUPPORT) | 3 | |
| 856A2922 | FIXTURE, TORQUE/LOOSEN - NO. 1 BEARING NUT (TORQUE/LOOSEN FIXTURE) | 1 | |
| 856A2922G01 | FIXTURE, TORQUE/LOOSEN - NO. 1 BEARING NUT (TORQUE/ LOOSEN FIXTURE) | 5 | |
| 856A2961G02 | INS/REM FIXTURE - AGB HANDCRANKING SEALOL | 8 | |
| 856A2961G03 | INS/REM FIXTURE - AGB HANDCRANKING SEALOL & MAGNETIC SEAL | 14 | |
| 856A2976 | FIXTURE, ASSY/DISASSY - LKTP NOZZLE SEGMENTS | 1 | |
| 856A2976G02 | Fixture, Assembly/Disassembly - LPT Nozzle Segments, Stage 3 (fixture) | 5 | |
| 856A2977 | Fixture, Assembly/Disassembly - LPT Rotor/Stator (fixture) | 1 | |
| 856A2977G01 | FIXTURE, ASSEMBLY / DISSASSEMBLY - LPT ROOTER / STATOR | 3 | |
| 856A3017G05 | FIXTURE, TORQUE - NO.1 BEARING HOUSE | 8 | |
| 856A3287G02 | HOLDING FIXTURE ROTATING AIR SEAL BOLT HEADS | 3 | |
| 856A3320G05 | FIXTURE ASSEMBLY/DISASSEMBLY LPT ROTOR STATOR | 5 | |
| 856A3358G03 | FIXTURE, HOLDING - NO. 4 BEARING INNER RACE BOLTS(HOLDING FIXTURE)OBSELETE REPLACED BY 856A3358G04 THEN 856A3358G05 | 2 | |
| 856A3387 G02 | Fixture Handling/Turn ‐ LPT Case and LPT Shroud | 1 | |
| 856A3387G03 | FIXTURE HANDLING/TURN LPT CASE AND LPT CASE AND LPT SHROUD SUPPORT | 3 | |
| 856A3416 G01 | Fixture Disassembly ‐ Rotating Air Seal | 3 | |
| 856A3416G01 | FIXTURE DISASSEMBLY ‐ ROTATING AIR SEAL | 3 | |
| 856A3426 G01 | Fixture Assembly/ Disassembly ‐ LPT Blades | 5 | |
| 856A3426G01 | Assembly Fixture | 5 | |
| 856A3450G02 | - FIXTURE, BALANCE - LPT ROTOR/STATOR ASSEMBLY | 3 | |
| 856A3466G01 | FIXTURE, ASSEMBLY/DISASSEMBLY | 6 | |
| 856A3487G02 | FIXTURE # BALL BEAR.4 THE TOOL IS USED TO PROTECT THE NO. 4 BALL BEARING | 4 | |
| 856A3503G01 | FIXTURE, REMOVAL/INSTALLATION AND HANDLING - BOOSTER ROTOR/STATOR ASSEMBLY | 3 | |
| 856A3503G02 | FIXTURE, REMOVAL/INSTALLATION AND HANDLING - BOOSTER ROTOR/STATOR ASSEMBLY | 5 | |
| 856A3532G02 | FIXTURE, LIFT AND TURN-FAN FRAME ASSEMBLY | 1 | |
| 856A3535 G02 | Fixture Lift ‐ Booster Rotor‐Stator Assembly | 3 | |
| 856A3535G02 | FIXTURE LIFT BOOSTER ROTOR STATOR ASSEMBLY | 3 | |
| 856A3731G03 | FIXTURE HANDLING - FAN DISK (SET) | 6 | |
| 856A3732G01 | Fixture Handling Booster Rotor/Stator Assembly | 1 | |
| 856A3732G04 | BOOSTER/STATOR ASSEMBLY HANDLING FIXTURE | 8 | |
| 856A3738 | FIXTURE, TORQUE / LOOSEN NO 1 BEARING NUT. | 1 | |
| 856A3738G01 | Fixture Torque Loosen NB 1 Bearing Nut | 9 | |
| 856A3738G01 | FIXTURE, TORQUE / LOOSEN - #1 BEARING NUT | 9 | |
| 856A3752 | FIXTURE, REMOVAL - STAGE 1-2-3 OUTER STATIONARY AIR SEAL (FIXTURE) | 1 | |
| 856A3752 G04 | Removal Fixture - Stage 1, 2 and 3 Outer Sta Air Seal | 8 | |
| 856A3752G02 | Fixture, Remove Stage 1-2-3 Outer Stat Air Seal | 1 | |
| 856A3752G04 | Fixture, Removal - Stage 1-2-3 Outer Stationary Air Seal (fixture) | 8 | |
| 856A3760 | FIXTURE, ASSEMBLY / DISSASSEMBLY - LPT NOZZLE SEGMENTS STG 2 | 1 | |
| 856A3760G01 | Fixture Assy/Disassy LPT Nozzle Segments Stage 2 | 1 | |
| 856A3760G03 | FIXTURE, ASSEMBLY/DISASSEMBLY - LPT NOZZLE SEGMENTS, STAGE 2 (FIXTURE) | 1 | |
| 856A3760G04 | Fixture, Assembly/Disassembly - LPT Nozzle Segments, Stage 2 (fixture) | 2 | |
| 856A3760G05 | FIXTURE, ASSY/DIS - LPT NOZZLE SEGMENTS STG 2 | 4 | |
| 856A3762 | FIXTURE, ASSEMBLY/DISASSEMBLY - LPT ROTOR/STATOR (FIXTURE) | 1 | |
| 856A3762G02 | FIXTURE, ASSEMBLY/DISASSEMBLY - LPT ROTOR/STATOR (FIXTURE) | 1 | |
| 856A3762G03 | Fixture, Assembly/Disassembly - LPT Rotor/Stator (fixture) | 8 | |
| 856A3763 | FIXTURE, A/D- LPT NOZZLE SEGMENTS, STG 1 | 1 | |
| 856A3763G01 | FIXTURE, ASSEMBLY/DISASSEMBLY - LPT NOZZLE SEGMENTS,STG 3 (FIXTURE)OBSELETE REPLACED BY 856A3763G02 THEN 856A3763G03 | 1 | |
| 856A3763G03 | Fixture, Assembly/Disassembly - LPT Nozzle Segments, Stg 3 (fixture) | 6 | |
| 856A3767G01 | HANDLING FIXTURE - LPT STATOR/ROTOR (HANDLING FIXTURE)OBSELETE SUPERSEDED BY 856A3767G02 | 1 | |
| 856A3769G01 | Fixture, Handling Pivoting-Fan Frame & Case | 1 | |
| 856A3781G02 | FIXTURE - ADJUSTMENT, VBV DOOR (CFM INTERNATIONAL INC. - GE SUPPORT SERVICES) | 7 | |
| 856A3913 | FIXTURE, CHECK ASSEMBLY | 1 | |
| 856A3913G01 | Fixture, Checking - Assembly/TRF with No. 5 Bearing Support | 2 | |
| 856A3913G03 | FIXTURE, CHECK ASSEMBLY | 6 | |
| 856A3921 | FIXTURE, TIGHTENING/LOOSENESS | 1 | |
| 856A3921G01 | TIGHTENING/LOOSENING FIXTURE - TGB NUTS | 1 | |
| 856A3921G02 | Fixture, Tightening/Looseness - TGB Vespel Nuts (tightening/looseness fixture) | 2 | |
| 856A4009G04 | FIXTURE INSPECTION COMBUSTOR ASSEMBLY | 1 | |
| 856A4012G05 | ASSEMBLY/DRILL FIXTURE | 1 | |
| 856A4026G02 | FIXTURE MACHINING NO. 3 BEARING FORWARD STATIONARY OIL SEAL | 1 | |
| 856A4071G01 | Fixture Stack/Weld Comb Case | 1 | |
| 856A4185G01 | FIXTURE, WATERFLOW - HPT BLADES (WATERFLOW FIXTURE) NOT ESSENTIAL TO START | 1 | |
| 856A4200G02 | FIXTURE, INSPECTION - COMBUSTOR ASSEMBLY | 1 | |
| 856A4200G04 | FIXTURE, INSPECTION - COMBUSTOR ASSEMBLY (INSPECTION FIXTURE) | 1 | |
| 856A4201G02 | Fixture, Assembly & Inspection | 1 | |
| 856A4206 | FIXTURE, WELD/MACHINE - SEAL LIP, COMBUSTOR, AFT | 1 | |
| 856A4206G02 | FIXTURE, WELD/MACHINE – SEAL LIP, COMBUSTOR, AFT | 1 | |
| 856A4219G01 | FIXTURE, SHOTPEEN - HPT BLADE DOVETAIL (SHOTPEEN FIXTURE) NOT ESSENTIAL TO START | 1 | |
| 856A4219G02 | FIXTURE, SHOTPEEN - HPT BLADE DOVETAIL (SHOTPEEN FIXTURE) NOT ESSENTIAL TO START | 1 | |
| 856A4234G03 | FIXTURE SET, MACHINING HPT ROTOR SHAFT - FRONT | 1 | |
| 856A4604G01 | FIXTURE, CHECKING - LPT STAGE 1 BLADE NOT ESSENTIAL TO START | 1 | |
| 856A4605G01 | FIXTURE, CHECKING - LPT STAGE 2 BLADE NOT ESSENTIAL TO START | 2 | |
| 856A4606G01 | FIXTURE, CHECKING - LPT STAGE 3 BLADE NOT ESSENTIAL TO START | 2 | |
| 856A4619G02 | SEGMENT FIXTURE - LPT NOZZLE STG1 | 1 | |
| 856A4624 | FIXTURE SCOURING ABRADABLE STRIP FAN CASE | 1 | |
| 856A4624G02 | FIXTURE - SCOURING, ABRADABLE STRIP, FAN CASE | 1 | |
| 856A4624G03 | Fixture, Scouring - Abradable Strip Fan Case | 5 | |
| 856A5636G01 | EDM FIXTURE - LPT NOZZ STG 1 STAT AIR SEAL USE | 1 | |
| 856A5636G02 | EDM FIXTURE - LPT NOZZ STG 1 STAT AIR SEAL USE | 1 | |
| 856A5636G03 | EDM FIXTURE - LPT NOZZ STG 1 STAT AIR SEAL USE | 1 | |
| 856A5636G04 | EDM FIXTURE - LPT NOZZ STG 1 STAT AIR SEAL USE | 1 | |
| 856A5638G01 | EDM FIXTURE - LPT FWD ROTATING AIR SEAL | 1 | |
| 856A5638G02 | EDM FIXTURE - LPT FWD ROTATING AIR SEAL | 1 | |
| 856A5655G01 | FIXTURE CHECK TILT ANGLE STAGE 2 OUTER STATIONARY AIR SEAL | 2 | |
| 856A5656G01 | FIXTURE CHECK TILT ANGLE STAGE 3 OUTER STATIONARY AIR SEAL | 1 | |
| 856A5678G01 | Tool Set holding Fixture | 1 | |
| 856A5679G01 | Tool Set holding Fixture | 1 | |
| 856A5795G01 | MACHINING & CHECKING FIXTURE LPT SEGMENT | 1 | |
| 856A5795G02 | MACHINING & CHECKING FIXTURE LPT SEGMENT | 1 | |
| 856A5796G01 | MACHINING & CHECKING FIXTURE LPT SEGMENT | 1 | |
| 856A5797G01 | MACHINING & CHECKING FIXTURE LPT SEGMENT | 1 | |
| 856A5802G01 | SEGMENT CHECKING FIXTURE - LPT | 1 | |
| 856A5904G01 | FIXTURE, CHECKING - LPT STAGE 1 BLADE NOT ESSENTIAL TO START | 1 | |
| 856A5905G01 | FIXTURE, CHECKING - LPT STAGE 2 BLADE (CHECKING FIXTURE) NOT ESSENTIAL TO START | 1 | |
| 856A5906G01 | FIXTURE, CHECKING - LPT STAGE 3 BLADE (CHECKING FIXTURE) NOT ESSENTIAL TO START | 1 | |
| 856A5907G01 | FIXTURE, CHECKING - LPT STAGE 4 BLADE NOT ESSENTIAL TO START | 1 | |
| 856A5911G01 | FIXTURE, CHECKING - FAN BLADE TIP SHROUD DIMENSIONAL CHECKS NOT ESSENTIAL TO START | 1 | |
| 856A5925G01 | SEGMENT FIXTURE - LPT NOZZLE STG1 | 1 | |
| 856A9001G03 | THURST REVERSER R&R FIXTURE | 1 | |
| 856A9001G07 | SLING, THRUST REVERSER R&R FIXTURE | 1 | |
| 856AI0I9 | FIXTURE VERTICAL LIFT - COMB CASE ASSY AFT | 1 | |
| 856AII57 | FIXTURE, LIFT-VARIABLE C G GEN. PURPOSE, HEAVY | 1 | |
| 8574812 | Fixture – Assembly, Actuator | 1 | |
| 8574813 | Fixture – Assembly, Housing Bearing | 1 | |
| 8813535000 | SEALING FIXTURE | 1 | |
| 8813824000 | SEALING RING FIXTURE | 3 | |
| 8815815000 | FT ASSEMBLY FIXTURE | 1 | |
| 8817958000 | SEALING FIXTURE | 1 | |
| 8819385000 | ASSEMBLY FIXTURE | 2 | |
| 8819744000 | ASSEMBLY FIXTURE | 1 | |
| 882640AF1 | LEVEL INDICATOR PRE-SET FIXTURE | 1 | |
| 882700AF1 | ASSEMBLY FIXTURE | 1 | |
| 8C2057 | FIXTURE, CHILL – HPT ROTOR, HOT SECT MODULE | 1 | |
| 8C2060 | FIXTURE, CHILL - HPT AFT ROTATING SEAL | 1 | |
| 8C2067 | FIXTURE, INSTALLATION - #4 BEARING CARBON SEAL | 1 | |
| 8C2071 | FIXTURE, REMOVAL - CARBON SEAL, NO. 4 BEARING | 1 | |
| 8C2075 | FIXTURE - SEPARATION - TCF AND HPT CASE | 1 | |
| 8C2087 | FIXTURE, ALIGNMENT - ASPIRATING AIR SEAL | 1 | |
| 8C2123 | FIXTURE, REMOVAL-CDP SEAL | 1 | |
| 8C2137 | FIXTURE, DUMMY CDP SEAL | 1 | |
| 8C2176 | FIXTURE - INSTALL - EXTENSION CASE MID FLANGE BOLTS (FOR PRODUCTION ONLY) | 1 | |
| 8C2178 | FIXTURE, SUPPORT - AFT HPCS EXTENSION CASE (LIKE 2704 BUT LIGHTER) | 1 | |
| 8C2179 | FIXTURE, LIFT – HPCS FORWARD CASE, VERTICAL | 1 | |
| 8C2182 | FIXTURE, LIFT – HPCS FORWARD CASE, HORIZONTAL | 1 | |
| 8C2186 | FIXTURE, COUNTER TORQUE – HPC VSV (DISASSEMBLY | 1 | |
| 8C2189 | FIXTURE, SUPPORT - AFT COMPRESSOR INNER STATOR ASSEMBLY | 1 | |
| 8C2231 | FIXTURE, DISASSEMBLY - HP | 1 | |
| 8C2315 | FIXTURE - RUNOUT - FAN CASE | 1 | |
| 8C2316 | FIXTURE - GRIND - STG 1 FAN CASE SHROUD | 1 | |
| 8C2511 | FIXTURE, PUSHER/PULLER CARBON SEAL NO. 1 BEARING | 1 | |
| 8C2514 | FIXTURE, TEST - CARBON SEAL - NO. 1 BEARING | 1 | |
| 8C2527 | FIXTURE, REMOVE – INTERSHAFT SEAL | 1 | |
| 8C2535 | SEATING FIXTURE, NO. 1 BEARING, RLR, CYL, INNER RACE | 1 | |
| 8C2538 | FIXTURE SEATING - FAN SHAFT EXTENSION | 1 | |
| 8C2540 | FIXTURE, SEATING - NO. 2 BEARING INNER RACE | 1 | |
| 8C2544 | FIXTURE, SEATING - FAN SHAFT SPEED SENSOR | 1 | |
| 8C2556 | FIXTURE, SEPARATION - NO 1 AND NO 2 BRG HOUSING | 1 | |
| 8C2587 | TOOL SET, LIFTING FIXTURE - ACCESSORY GEARBOX | 1 | |
| 8C2717 | FIXTURE - RMV/INST FWD OUTER SEAL - LITE (PRODUCTION TOOL) | 1 | |
| 8C2718 | FIXTURE, LIFT – CDN ASSEMBLY | 1 | |
| 8C2720 | FIXTURE,RESTRAIN - COMPRESSOR ROTOR, AFT (SERVICE SHOP TOOL ONLY) | 1 | |
| 8C2724 | FIXTURE, INSTALL - STG 1 AND 2 HANGER/SUPPORT STATOR CASE | 1 | |
| 8C2769 | FIXTURE - INDIVIDUAL INSTALL - STG 1 AND 2 HANGER / SUPPORT STATOR CASE | 1 | |
| 8C2802 | FIXTURE, ALIGNMENT - HOT SECT MODULE | 1 | |
| 8C2833 | FIXTURE - LIFT - HPTR MIDSEAL | 1 | |
| 8C2904 | FIXTURE, ALIGNMENT - A/O SEPARATOR TO FFS | 1 | |
| 8C3109 | FIXTURE - LIFT - LPT CASE -VERT - AFT | 1 | |
| 8C3191 | FIXTURE - RESTRAINING - LOW PRESSURE TURBINE CASE | 1 | |
| 8C3193 | FIXTURE - RESTRAINING - LPT STAGE 3 INTERSTAGE SEAL | 1 | |
| 8C3197 | FIXTURE - RESTRAINING - NO 5 BRG OUTERROTATING AIR SEAL | 1 | |
| 8MIT-1544200 | ASSEMBLY FIXTURE | 1 | |
| 905632-1-1 | ALIGNMENT FIXTURE TURBINE ASSEMBLY | 1 | |
| 916482-1-1 | LEAKAGE FIXTURE SET | 1 | |
| 9429M49G01 | FIXTURE, PULLER BHGE 9429M49G01 АЩК EXHAUST GAS TEMPERATURE PROBE -- (ALTERNATE FOR 2C14898) USED IN WP 1711 00 | 4 | |
| 9429M59 | FIXTURE - ASSEMBLY-BREACH LOADER | 1 | |
| 9446M57 | FIXTURE, RAISE/LOWER - ACCESSORY GEARBOX MODULE FIXTURE | 1 | |
| 9446M57P03 | RAISE / LOWER FIXTURE (GENX-2B) | 1 | |
| 9446M61G02 | FIXTURE, LIFT - COMPRESSOR STATOR CASE, UPPER, SET | 1 | |
| 9446M95 | FIXTURE, LIFT ARM - GENERAL PURPOSE | 1 | |
| 9471M24 | FIXTURE, LIFT AND TURN - GENERAL PURPOSE | 1 | |
| 9471M24G01 | FIXTURE, LIFT AND TURN - GENERAL PURPOSE | 1 | |
| 9471M25 | FIXTURE, LIFT AND TURN - GENERAL PURPOSE | 1 | |
| 9471M26G01 | FIXTURE, RAISE/LOWER ACCESSORY GEARBOX MODULE | 1 | |
| 9480M67G01 | FIXTURE, ASSEMBLE/RE | 1 | |
| 953-161 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| 956A1031 | FIXTURE - RTNR-NO 4 BRG INNER RACE/OIL SCOOP/ROTATING SEAL/FWD SEAL | 1 | |
| 956A1037 | FIXTURE - RESTRAINING - FWD ROTATING OIL SEAL NO. 4 BEARING | 1 | |
| 956A1040 | FIXTURE - REMOVAL-AFT SEAL - HPT ROTOR | 1 | |
| 956A1042 | FIXTURE - SEPARATION - INTERSTAGE SEAL/BLADE RETAINER | 1 | |
| 956A1042G01 | Fixture,separation-interstage seal/blade retainer | 1 | |
| 956A1050 | FIXTURE REMOVE - NO. 4 SEAL RUNNER | 1 | |
| 956A1064 | FIXTURE - INSTALL - STATIONARY OIL SEAL - FWD | 1 | |
| 956A1065 | FIXTURE - INSTALL - CARBON SEAL - NO 4 | 1 | |
| 956A1068 | FIXTURE - SEPARATION - TCF & HPT CASE | 1 | |
| 956A1089 | FIXTURE - INSTALL - RETAINING PIN - SERVICES TUBE NUTS | 1 | |
| 956A1098 | FIXTURE - LEAKAGE TEST-CARBON SEAL - N0 4. BEARING | 1 | |
| 956A1102 | FIXTURE - SUPPORT - HPC ROTOR ASSEMBLY (GENSPECT) | 1 | |
| 956A1150 | FIXTURE - SUPPORT - HPC AFT STATOR ASSEMBLY | 1 | |
| 956A1153 | FIXTURE - SHIM HP COMPRESSOR STATOR AFT CASE | 1 | |
| 956A1155 | FIXTURE - LIFT FPCS FWD HALF CASE | 1 | |
| 956A1161 | FIXTURE - ALIGHTMENT HPC STATOR SPLIT CASE | 1 | |
| 956A1161P01 | FIXTURE - ALIGNMENT HPC STATOR SPLIT CASE | 1 | |
| 956A1172 | FIXTURE - LIFT - HP COMPR STATOR CASE | 1 | |
| 956A1192 | FIXTURE - ALIGNMENT - HPC STATOR SPLIT CASE | 1 | |
| 956A1204 | FIXTURE - BUILD UP - STG 1 HOT NOZZLE ASSEMBLY | 1 | |
| 956A1208 | FIXTURE - LIFT - CDN ASSEMBLY | 1 | |
| 956A1215 | FIXTURE - INSTALL - STG 1 HANGER/SUPPORT STATOR CASE | 1 | |
| 956A1229 | FIXTURE - DISASSEMBLY - HPT ROTOR/HP COMPRESSOR ROTOR | 1 | |
| 956A1234 | FIXTURE - SUPPORT - AFT COMPRESSOR CASE | 1 | |
| 956A1262 | FIXTURE - DISASSEMBLY - HPTR/HPCR | 1 | |
| 956A1266 | FIXTURE - ASSEMBLY - CMC SEGMENTED SHROUD | 1 | |
| 956A1275 | FIXTURE - LIFT-VERTICAL CORE ASSEMBLY | 1 | |
| 956A1276 | FIXTURE - LIFT - VERTICAL CORE ASSEMBLY - HPTR INSTALLED | 1 | |
| 956A1277 | FIXTURE - INSTALL - STG 1 HANGER - SUPPORT STATOR CASE | 1 | |
| 956A1282 | FIXTURE - INSTALL/REMOVE- SHANK NUT - CDP STATOR SEAL | 1 | |
| 956A1305 | FIXTURE - LIFT - FAN ASSEMBLY | 1 | |
| 956A1315 | FIXTURE - SEATING CHECK - CORE MODULE TO INLET GEAR BOX | 1 | |
| 956A1322 | FIXTURE - LIFT-ADJUSTABLE CG - GENERAL PURPOSE | 1 | |
| 956A1323 | FIXTURE - SETMASTER/TEST - DROP CHECK TOOL | 1 | |
| 956A1351 | FIXTURE - REMOVE - HPT AFT STATIONARY SEAL | 1 | |
| 956A1502 | FIXTURE - TEST - NO. 3 CARBON SEAL | 1 | |
| 956A1503 | FIXTURE - GUIDE - NO. 3 CARBON SEAL | 1 | |
| 956A1507 | FIXTURE - LIFT - IGB ASSEMBLY | 1 | |
| 956A1512 | FIXTURE - ASSEMBLY - NO. 3 BRG | 1 | |
| 956A1520 | ASSEMBLY ALIGNING FIXTURE - INSTALL - RETAINING PINS | 1 | |
| 956A1525 | FIXTURE - INSTALL - BOLTS - SELF RETAINING - IGB | 1 | |
| 956A1527 | FIXTURE - ASSEMBLY - LOCKNUT - IGB | 1 | |
| 956A1700 | FIXTURE - STAND HYDRAULIC SEATING - HPT ROTOR | 1 | |
| 956A1701 | SET - FIXTURE LIFT - HPCR | 1 | |
| 956A1727 | FIXTURE - INSTALLATION - HPT FWD OUTER SEAL | 1 | |
| 956A1729 | FIXTURE - SUPPORT - AFT COMPRESSOR CASE | 1 | |
| 956A1736 | FIXTURE - INSTALLATION-HPT FWD OUTER SEAL | 1 | |
| 956A1804 | FIXTURE - RESTRAINING - SEAL - TRANSITION DUCT - TCF | 1 | |
| 956A1805 | FIXTURE - RESTRAIN - SEAL ROTATING - OIL | 1 | |
| 956A1805G02 | ROTATING OIL SEAL RESTRAIN FIXTURE | 1 | |
| 956A1807 | FIXTURE - RESTRAINING -MIDSEAL - HPTR | 1 | |
| 956A1807G02 | Fixture,restraining-midseal,hptr | 1 | |
| 956A1810 | FIXTURE - RESTRAINING - FWD OUTER SEAL - ROTATING | 1 | |
| 956A1811 | FIXTURE - RESTRAIN - AFT ROTATING AIR SEAL - HPTR | 1 | |
| 956A1816 | FIXTURE - INSTALL/REMOVE-HPT ROTOR - FWD SEAL | 1 | |
| 956A3001 | FIXTURE - ASSEMBLY & DISASSEMBLY - HPT ROTOR | 1 | |
| 956A3006 | FIXTURE - INSTALL/ REMOVE-HPTR MIDSEAL | 1 | |
| 956A3022 | FIXTURE - INSTALL/REMOVE- HPT ROTOR - FWD SEAL | 1 | |
| 956A3031 | FIXTURE - RTNR-NO 4 BRG INNER RACE/OIL SCOOP/ROTATING SEAL/FWD SEAL | 1 | |
| 956A3041 | FIXTURE - CHILL-HPT ROTOR INTSTG SEAL/ STG 1 AFT RETAINER | 1 | |
| 956A3042 | FIXTURE - SEPARATION-HPTR MIDSEAL | 1 | |
| 956A3050 | FIXTURE - REMOVE - NO 4 CARBON SEAL RUNNER | 1 | |
| 956A3061 | FIXTURE - REMOVE - STATIONARY SEALS - B-SUMP | 1 | |
| 956A3077 | FIXTURE - INSTALL - RETAINING WIRE - SERVICE TUBE NUTS | 1 | |
| 956A3079 | FIXTURE - REMOVAL - AFT SEAL - HPT ROTOR | 1 | |
| 956A3088 | FIXTURE, SEPARATION - TCF AND HPT CASE | 1 | |
| 956A3090 | FIXTURE - REMOVAL - STATIONARY SEAL - B SUMP | 1 | |
| 956A3093 | FIXTURE - LEAKAGE TEST - CARBON SEAL - NO. 4 BEARING | 1 | |
| 956A3094 | FIXTURE - INSTALL / REMOVE - CARBON SEAL. NO. 4 | 1 | |
| 956A3096 | FIXTURE - INSTALL - CARBON SEAL - NO 4 | 1 | |
| 956A3129 | FIXTURE - SUPPORT - DISASSEMBLY - HIGH PRESSURE COMPRESSOR ROTOR | 1 | |
| 956A3130 | FIXTURE - SEPARATE/DISASSEMBLE - HPCR | 1 | |
| 956A3150 | FIXTURE - SUPPORT - HPC AFT STATOR ASSEMBLY | 1 | |
| 956A3153 | FIXTURE - SHIM HPCS AFT CASE | 1 | |
| 956A3155 | FIXTURE - LIFT - FWD COMPRESSOR CASE HALF | 1 | |
| 956A3204 | FIXTURE - BUILD UP - STG 1 HPT NOZZLE ASSEMBLY | 1 | |
| 956A3215 | FIXTUREM INSTALL - STG 1 HANGER/SUPPORT HPT STATOR CASE | 1 | |
| 956A3234 | FIXTURE - SUPPORT - AFT COMPRESSOR CASE | 1 | |
| 956A3260 | FIXTURE - ASSEMBLY - CMC SEGMENTED SHROUD (U SHROUD) | 1 | |
| 956A3262 | FIXTURE - DISASSEMBLY - HPTR/HPCR | 1 | |
| 956A3277 | FIXTURE - INSTALL - STG 1 HANGER - SUPPORT STATOR CASE | 1 | |
| 956A3400 | FIXTURE - INSTALL-RETAINING WIRE - SERVICE TUBE NUTS | 1 | |
| 956A3502 | FIXTURE - TEST - NO. 3 CARBON SEAL | 1 | |
| 956A3503 | FIXTURE - GUIDE - NO. 3 CARBON SEAL | 1 | |
| 956A3530 | FIXTURE - ASSEMBLY - NO 3 BRG | 1 | |
| 956A3542 | FIXTURE - ASSEMBLY - LOCKNUT - IGB | 1 | |
| 956A3700 | FIXTURE - LIFT - MIDSEAL | 1 | |
| 956A3701 | SET - FIXTURE LIFT | 1 | |
| 956A3727 | FIXTURE - INSTALLATION - HPT FWD OUTER SEAL | 1 | |
| 956A3728 | FIXTURE - INSTALLATION - HPT STG1 RETAINER & MIDSEAL | 1 | |
| 956A3732 | FIXTURE - CHILL - HPT ROTOR AFT SEAL | 1 | |
| 956A3734 | FIXTURE - LIFT COMPRESSOR MODULE/SUPPORT ? AFT COMPRESSOR CASE | 1 | |
| 956A3805 | FIXTURE - RESTRAIN - AFT ROTATING OIL SEAL - NO 4 BRG | 1 | |
| 956A3807 | FIXTURE - RESTRAINING -MIDSEAL - HPTR | 1 | |
| 956A3810 | FIXTURE - RESTRAINING - HEAT SHIELD - TCF CASE | 1 | |
| 956A6003 | FIXTURE - TRUNNION - FAN CASE | 1 | |
| 956A6023 | FIXTURE - CLEARANCE CHECK - SENSOR N1 | 1 | |
| 956A6053 | FIXTURE - LIFT AND TURN - HANDLE AND GUIDE - FAN CASE | 1 | |
| 956A6058 | FIXTURE - BACKLASH CHECK - ABRADABLE SEAL | 1 | |
| 956A6074G01 | FIXTURE HANDLING FAN CASE LEAP 1A | 1 | |
| 956A6075G01 | FIXTURE, SHIPPING - FAN STATOR CASE MODULE, LEAP-1 | 1 | |
| 956A6084 | FIXTURE - GUIDE INSTALLATION - FAN CASE | 1 | |
| 956A6102 | FIXTURE - ASSEMBLY STAND - FAN HUB | 1 | |
| 956A6147 | FIXTURE - DUMMY - SENSOR N1 | 1 | |
| 956A6147G01 | FIXTURE, DUMMY - SENSOR N1 | 1 | |
| 956A6154 | FIXTURE - INSTALL REAR SEAL SUPPORT - VBV DOOR | 1 | |
| 956A6155 | FIXTURE - ASSEMBLY - BELLCRANCK ACTUATING - VBV | 1 | |
| 956A6208G01 | FIXTURE, ASSEMBLY STAND - TGB | 2 | |
| 956A6302 | FIXTURE - ASSEMBLY STAND - LPT | 1 | |
| 956A6304 | FIXTURE, RESTRAIN-ROTATING SEAL BEARING 4 | 1 | |
| 956A6311 | FIXTURE - REMOVE - ROTATING SEAL BEARING 4 | 1 | |
| 956A6337G01 | FIXTURE, ASSEMBLY - LOCKING RING | 1 | |
| 956A6435 | FIXTURE - ASSEMBLY / DISASSEMBLY - LPT ROTOR STG 1 TO 7 | 1 | |
| 956A6465 | FIXTURE - HOLDING - LPT CASE MISE AU ROND | 1 | |
| 956A6466 | FIXTURE - DISASSY-LPT SEAL RING STAGE 2-3 | 1 | |
| 956A6483 | FIXTURE - PUSHER - LPT RING -SEAL BEARING 5 | 1 | |
| 956A6489 | FIXTURE - PULLER - LPT RING -SEAL REAR ENCLOSURE | 1 | |
| 956A6490 | FIXTURE - REMOVE - LPT - RING SEAL | 1 | |
| 956A6491 | FIXTURE - PULLER - LPT RING -SEAL BEARING 5 | 1 | |
| 956A6499 | FIXTURE - ASSEMBLY/DISASSEMBLY - LPT NOZZLE STAGE 2 | 1 | |
| 956A6501 | FIXTURE - ASSEMBLY/DISASSEMBLY - LPT NOZZLE STAGE 3 | 1 | |
| 956A6503 | FIXTURE - ASSEMBLY/DISASSEMBLY - LPT NOZZLE STAGE 4 | 1 | |
| 956A6505 | FIXTURE - ASSEMBLY/DISASSEMBLY - LPT NOZZLE STAGE 5 | 1 | |
| 956A6509 | FIXTURE - ASSEMBLY/DISASSEMBLY - LPT NOZZLE STAGE 6 | 1 | |
| 956A6511 | FIXTURE - ASSEMBLY/DISASSEMBLY - LPT NOZZLE STAGE 7 | 1 | |
| 956A6524 | FIXTURE - REMOVAL - NO.5 BEARING OUTER CASE | 1 | |
| 956A6529 | FIXTURE - ASSEMBLY/DISASSEMBLY - LPT SHROUD 1 TO 6 | 1 | |
| 956A6575 | FIXTURE - RESTRAINER - SEALING RING | 1 | |
| 956A6604 | FIXTURE - HEATER - REAR SEAL NO.5 BEARING | 1 | |
| 956A6610 | FIXTURE - LIFTING - FRONT - ENGINE ASSEMBLY | 1 | |
| 956A6610G01 | FIXTURE, LIFTING - FRONT, ENGINE ASSEMBLY | 1 | |
| 956A6610G02 | FIXTURE, LIFT FORWARD ENGINE ASSEMBLY | 1 | |
| 956A6613 | FIXTURE - LIFTING - REAR - ENGINE ASSEMBLY | 1 | |
| 956A6613G01 | FIXTURE, LIFTING - REAR, ENGINE ASSEMBLY | 2 | |
| 956A6617 | FIXTURE, FLOW CHECK - CARBON SEAL NO.5 BEARING | 1 | |
| 956A6619 | FIXTURE - CENTERING - CARBON SEAL NO.5 BEARING | 1 | |
| 956A6627 | FIXTURE - RANGE CONTROL - ENGINE ASSEMBLY | 1 | |
| 956A6627G02 | RANGE CONTROL FIXTURE ENGINE ASSEMBLY | 1 | |
| 956A6637 | FIXTURE - ASSEMBLY - LOCKING RING | 1 | |
| 956A6637G01 | FIXTURE, ASSEMBLY - LOCKING RING | 2 | |
| 956A6637G02 | FIXTURE, ASSEMBLY - LOCKING RING | 3 | |
| 956A6804 | FIXTURE FOR SUPPORT BEARING 1 ASSEMBLY WITH BEARING 1 | 1 | |
| 956A6812 | FIXTURE, CENTERING - FRONT ROTATING SEAL | 1 | |
| 956A6834 | FIXTURE ASSY/DIASSY - JOINT ROTATING SEAL | 1 | |
| 956A7018 | FIXTURE, REMOVE/ INSTALL - AGB ASSEMBLY | 1 | |
| 956A7018G02 | FIXTURE AGB ASSEMBLY | 4 | |
| 956A7601 | FIXTURE - ASSEMBLY STAND - ACCESSORY GEARBOX | 1 | |
| 956A7638 | FIXTURE - GAP MEASURE - N1 SENSOR/WHEEL SPEED | 1 | |
| 956A7655 | FIXTURE - LIFTING - ENGINE ASSEMBLY | 1 | |
| 956A7655G01 | FIXTURE, LIFTING - ENGINE ASSEMBLY | 1 | |
| 956A7655G02 | FIXTURE LIFTING ENGINE ASSEMBLY | 2 | |
| 956A7655G03 | FIXTURE, LIFTING - ENGINE ASSEMBLY | 1 | |
| 956A7658 | FIXTURE - LIFTING - ENGINE ASSEMBLY | 1 | |
| 956A7658G02 | FIXTURE, LIFTING - ENGINE ASSEMBLY CFM LEAP | 1 | |
| 956A7658G03 | FIXTURE - LIFTING, LEAP-1B ENGINE ASSEMBLY | 4 | |
| 956A7658GO3 | FIXTURE, LIFTING- ENGINE ASSEMBLY | 4 | |
| 956A7660 | FIXTURE, SUPPORT OIL TUBE — LPT CASE | 1 | |
| 956A7660G01 | FIXTURE,SUPPORT OIL TUBE-LPT CASE | 1 | |
| 956A7680 | FIXTURE- OIL TANK PROTECTOR - ENGINE ASSEMBLY | 1 | |
| 956A8011 | FIXTURE - LIFT - FAN CASE & FAN FRAME | 1 | |
| 956A8017 | FIXTURE - LIFT - FAN ASSEMBLY | 1 | |
| 956A8076 | FIXTURE - REMOVE/INSTALL - TGB ASSEMBLY | 1 | |
| 956A8076G02 | FIXTURE, REMOVE/INSTALL - TGB ASSEMBLY | 3 | |
| 956A8085 | FIXTURE - EXTENSION PIN AND SPHERICAL JOINT - FAN CASE | 1 | |
| 956A8085G01 | FIXTURE, EXTENSION PIN AND SPHERICAL JOINT - FAN CASE | 1 | |
| 956A8085G02 | FIXTURE, EXTENSION PIN AND SPHERICAL JOINT - FAN CASE | 2 | |
| 956A8093G01 | FIXTURE, EXTENSION PIN AND SPHERICAL JOINT - FAN CASE | 2 | |
| 956A8104 | FIXTURE - INSTALL - N1 SENSOR BOLT | 1 | |
| 956A8126 | FIXTURE - SETTING - VARIABLE BLEED VALVE | 1 | |
| 956A8150 | FIXTURE - REMOVE - SLEEVE N1 SENSOR | 1 | |
| 956A8151 | FIXTURE - INSTALL - SEAL | 1 | |
| 956A8156 | FIXTURE - CHECK - IGV ASSEMBLY | 1 | |
| 956A8157 | FIXTURE - ASSY - TORQUING - VBV DOOR & REAR SEAL | 1 | |
| 956A8161 | FIXTURE - DUMMY - N1 SENSOR | 1 | |
| 956A8320 | FIXTURE - REMOVE - RING SEAL | 1 | |
| 956A8331 | FIXTURE - SETTLING - SHAFT - LP TURBINE ASSEMBLY | 1 | |
| 956A8402 | FIXTURE - INSTALL/REMOVE - RING - SEAL-REAR ENCLOSURE | 1 | |
| 956A8403 | FIXTURE - INSTALL/REMOVE - RING - SEAL | 1 | |
| 956A8404 | FIXTURE - HOLDING RING - LPT CASE | 1 | |
| 956A8432 | FIXTURE - DOG-CLUTCHING - RING - SEAL STG 2 | 1 | |
| 956A8435 | FIXTURE - BALANCE BASEPLATE LPT BLADED DISK | 1 | |
| 956A8438 | FIXTURE - ALIGNMENT - SHROUD - LPT STG 1 - SEGMENT | 1 | |
| 956A8439 | FIXTURE - INSTALL - SHROUD - LPT STG 1 TO 4 - SEGMENT | 1 | |
| 956A8443 | FIXTURE - RESTRAIN - NOZZLE - LPT STG 2 SEGMENT | 1 | |
| 956A8445 | FIXTURE - ALIGNMENT - SHROUD - LPT STG 2 - SEGMENT | 1 | |
| 956A8448 | FIXTURE - RESTRAIN - NOZZLE - LPT STG 3 SEGMENT | 1 | |
| 956A8451 | FIXTURE - RESTRAIN - NOZZLE - LPT STG 4 SEGMENT | 1 | |
| 956A8455 | FIXTURE - RESTRAIN - NOZZLE - LPT STG 5 SEGMENT | 1 | |
| 956A8475 | FIXTURE - SETTING BEAM | 1 | |
| 956A8492 | FIXTURE - ASSEMBLY STAND - NO.5 BEARING SUPPORT | 1 | |
| 956A8501 | FIXTURE - RESTRAIN - SUPPORT - SEG RADIAL SEAL | 1 | |
| 956A8505 | FIXTURE - LIFT - LPT REAR FRAME AND LPT CASE | 1 | |
| 956A8506 | FIXTURE - LIFT & TURN - FRAME - LPT REAR ASSEMBLY | 1 | |
| 956A8513 | FIXTURE - REMOVE - SUPPORT - SEG RADIAL SEAL | 1 | |
| 956A8516 | FIXTURE - SETTING - LPT DISK 1 | 1 | |
| 956A8609 | KIT FIXTURE - ASSEMBLY LOCKING RING | 1 | |
| 956A8622G01 | LPT REAR CASE ASSY REMOVE AND INSTALL FIXTURE | 1 | |
| 956A8638 | FIXTURE - GAP MEASURE - N1 SENSOR/WHEEL SPEED | 1 | |
| 956A8645 | FIXTURE - LIFT & TURN � REAR - ENGINE ASSEMBLY | 1 | |
| 956A8665 | FIXTURE - SETTLING - REAR CENTER VENTILATION TUBE | 1 | |
| 956A8688 | FIXTURE - LIFTING - FRONT - ENGINE ASSEMBLY | 1 | |
| 956A8688G01 | FIXTURE, LIFTING - FRONT, ENGINE ASSEMBLY | 2 | |
| 956A8939 | FIXTURE - ASSEMBLY STAND - AGB | 1 | |
| 96390-0-2006 | Brake Assembly Fixture | 1 | |
| 96390-0-2006 PM | BRAKE ASSEMBLY FIXTURE | 1 | |
| 964C719-1 | AIR INSET ASSEMBLY FIXTURE | 1 | |
| 964C720-1 | AIR INSET ASSEMBLY FIXTURE | 1 | |
| 96SPL-12757-D-0043 | SUPPORT FIXTURE ASSEMBLY | 1 | |
| 983-4287-201 | ZERO MONITOR CAL FIXTURE ASSEMBLY | 1 | |
| 98A27208442000 | FIXTURE HINGE ARMS SERVOCONTROLS | 3 | |
| 98A27303502000 | MEASURING EQUIPMENT,USE TO CHECK FIXTURE | 2 | |
| 98A27407530000 | FIXTURE-HINGE ARMS AND SERVO CONTROLS, RUDDER | 6 | |
| 98A27903000000 | FIXTURE-SETTING MICROSWITCH UNIT | 1 | |
| 98A27903000001 | FIXTURE-SETTING MICROSWITCH UNIT | 1 | |
| 98A33403502000 | SETTING,FIXTURE-LANDING AND TAXIING LIGHTS | 7 | |
| 98A52003500000 | FIXTURE OF DISASSEMBLY AND REASSEMBLY OF DAMPER PISTON | 1 | |
| 98A57004002000 | SEALING FIXTURE | 1 | |
| 98A57004002001 | FIXTURE - SEALING | 1 | |
| 98A71101024000 | HOLD-OPEN FIXTURE,USED TO ENABLE ENGINE | 1 | |
| 98A71101025000 | HOLD-OPEN FIXTURE,USED TO ENABLE ENGINE | 1 | |
| 98A71101502000 | HOLD-OPEN FIXTURE,USED TO HOLD/OPEN PWA | 8 | |
| 98A71103250000 | FIXTURE - THRUST REVERSER HOLD OPEN | 9 | |
| 98A71103508000 | SETTING CLOSURE FIXTURE-PWA THRUST REVER COWL DOORS | 2 | |
| 98A76103002000 | SETTING-MICROSWITCH UNIT FIXTURE | 1 | |
| 98D27403003052 | HYDRAULIC ASSEMBLY PUMP WITH PRESSURE HOSESFIXTURE STRUT THSA | 1 | |
| 98V2730900A000 | FIXTURE SET | 1 | |
| 997004-00 | DIAPHRAGM ASSEMBLY FIXTURE | 1 | |
| 99A34201003000 | FIXTURE-POSITIONING,AOA SENSOR | 1 | |
| 9C03039G01 | FIXTURE, FUN CASE (RUNOUT TOOL) NOT REQUIRED IF 9R7066 IS AVAILABLE | 1 | |
| 9C1003 | FIXTURE, LIFT/TURN - HPT ROTOR ASSEMBLY - AFT | 1 | |
| 9C1115G03 | FIXTURE ASSEMBLY HORIZONTAL LIFT, SUPER CORE/WITHOUT MINIBASE 20,000 LB. (9072 KG) SPECIAL TOOL FOR GAS TURBINE REPLACEMENT | 1 | |
| 9C1135 | FIXTURE, RUNOUT-CDP SEAL/HPTR | 1 | |
| 9C1165G02 | Fixture - Position, Aft Engine Mount, GE90-70/80/90 Series And GE90-100 Series | 3 | |
| 9C1173G02 | FIXTURE - RAISE/LOWER, ACCESSORY GEARBOX MODULE | 1 | |
| 9C1197 | FIXTURE SET - GUIDE - COMPRESSO | 1 | |
| 9C1322G03 | FIXTURE, RUNOUT MEASUREMENT-FAN CASE | 1 | |
| 9C1335 | FIXTURE,ASSEMBLY AFT FAN CASE | 1 | |
| 9C1335G02 | FIXTURE, ASSEMBLY AFT FAN CASE | 1 | |
| 9C1336 | FIXTURE,ASSEMBLY AFT FAN CASE | 1 | |
| 9C1347 | FIXTURE, LIFT-STG 2 HPTN ASSEM | 1 | |
| 9C1381G01 | FIXTURE, LIFT AND TURN - FWD FAN CASE MODULE | 1 | |
| 9C1385G01 | AGB RAISE/LOWER FIXTURE | 1 | |
| 9C1385G02 | FIXTURE - RAISE/LOWER, ACCESSORY GEARBOX MODULE | 1 | |
| 9C1422 | FIXTURE, RESTRAINING-HPT FORWARD OUTER SEAL | 1 | |
| 9C1425 | FIXTURE, RESTRAINING-FORWARD INNER SEAL | 1 | |
| 9C1433 | FIXTURE, RESTRAINING-LPT STAGE 3 INTERSTAGE SEAL | 1 | |
| 9C1434 | FIXTURE, RESTRAINING-LPT STAGE 4 INTERSTAGE SEAL | 1 | |
| 9C1436 | FIXTURE, RESTRAINING-SEAL, PLT ROTOR STGE 2 | 1 | |
| 9C1437 | FIXTURE, RESTRAINING-LPT FORWARD SEAL SUPPORT | 1 | |
| 9C1438 | FIXTURE, RESTRAINING-LPT STAGE 5 INTERSTAGE SEAL | 1 | |
| 9C1441 | FIXTURE, RESTRAINING-NO 5 BRG OUTER ROTATING AIR SEAL | 1 | |
| 9C1703 | FIXTURE, MACHINING VANES SECT, | 1 | |
| 9C1882 | TOOL SET/LIFTING FIXTURE | 1 | |
| 9C1888 | TOOL SET/LIFTING FIXTURE | 1 | |
| 9C1903 | TOOL SET/ LIFTING FIXTURE | 1 | |
| 9C2311 | FIXTURE BUILDUP VANE SECTOR | 1 | |
| 9C2324 | FIXTURE R/I SEAL ROT #1 BRG. | 1 | |
| 9C2365 | FIXTURE, HANDLING BEARING ASSEMBLY NO 2 | 1 | |
| 9C2373 | FIXTURE, LIFT HPC STATOR CASE | 1 | |
| 9C2373G02 | LIFTING FIXTURE - HPCS FWD CASE | 1 | |
| 9C2396 | SETTING FIXTURE VSV ACTUATOR SUPPORT | 1 | |
| 9C301G01 | FIXTURE FAN CASE RUNOUT | 1 | |
| 9C3039 | FIXTURE, RUNOUT MEASUREMENT - FAN CASE | 1 | |
| 9C3039G01 | FIXTURE FAN CASE RUN | 1 | |
| 9C3048 | FIXTURE,GUIDE-FAN FORWARD SHAFT ASSEMBLY | 1 | |
| 9C3060 | FIXTURE, RESTRAINING-LPT STAGE 6 INTERSTAGE SEAL | 1 | |
| 9C3067 | SUPERSEDED BY G02FIXTURE, RESTRAINING-NO 3 BEARING, ROTATING SEAL | 1 | |
| 9C3070 | FIXTURE, RESTRAINING-HPT ROTOR FORWARD SEAL | 1 | |
| 9C3071 | FIXTURE, RESTRAINING-TRANSITION DUCT SEAL SUPPORT | 1 | |
| 9C3084 | FIXTURE, RESTRAINING-NO 5 BEARING SEAL HSG | 1 | |
| 9C3144 | FIXTURE, INSTALLATION ASSEMBLY FAN STATOR | 1 | |
| 9C3144G01 | FIXTURE INSTALLATION ASSEMBLE FAN STATOR | 1 | |
| 9C3329 | FIXTURE - BASE - WATER WASH GRIND | 1 | |
| 9C3420G01 | AFT FAN CASE DRILL FIXTURE KIT | 1 | |
| 9C6003 | FIXTURE - SHIPPING FAN STATOR CASE MODULE | 1 | |
| 9C6003P01 | FIXTURE, SHIPPING - FAN STATOR CASE MODULE | 1 | |
| 9C6015 | FIXTURE SHIPPING FAN STATOR CASE MODULE | 1 | |
| 9C6015P01 | FIXTURE, SHIPPING - FAN STATOR CASE MODULE | 1 | |
| 9C6015P08 | FIXTURE, SHIPPING - FAN STATOR CASE MODULE | 1 | |
| 9C6015P09 | FIXTURE, SHIPPING - FAN STATOR CASE MODULE | 1 | |
| 9C6020G06 | FIXTURE, LIFT - ENGINE/PROPULSOR, GE90-70/80/90 AND -100 SERIES ENGINES | 4 | |
| 9C6023 | FIXTURE - SHIPPING - FAN STATOR CASE MODULE (2 OVERHEAD HOISTS REQUIRED) | 1 | |
| 9C6030P01 | FIXTURE, SEPARATION - FAN CASE GE90-70/80/90 AND GE90-100 SERIES | 3 | |
| 9MIT65B0121 | ASSEMBLY FIXTURE | 1 | |
| 9MIT65B01211 | ASSEMBLY FIXTURE - SHOCK STRUT, WING LANDING GEAR, BODY LANDING GEAR AND NOSE LANDING GEAR | 2 | |
| 9R7066 | (RT) FIXTURE, MACHINING- STG1 FAN CASE SHROUD | 1 | |
| 9R7066G02 | FIXTURE MACHINING-STAGE 1 FAN CASE SHROUD (GRIND TOOL) | 1 | |
| 9R7066G03 | FIXTURE MACHINING-STAGE 1 FAN CASE SHROUD (GRIND TOOL) | 1 | |
| 9R7066G04 | FIXTURE MACHINING-STAGE 1 FAN CASE SHROUD (GRIND TOOL) | 1 | |
| 9R7066G06 | FIXTURE MACHINING - STG1 FAN CASE SHEOUD | 1 | |
| A20001-152 | FIXTURE SET,AIRCRAFT MAINTENANCE | 14 | |
| A20001-185 | FIXTURE SET,AIRCRAFT MAINTENANCE | 9 | |
| A2006407 | FIXTURE-ASSEMBLY FOR KEYS KEYBOARD | 1 | |
| A2006408 | FIXTURE-ASSEMBLY FOR KEYS KEYBOARD | 1 | |
| A2172G1 | FIXTURE-LENS AND GASKET ASSEMBLING | 1 | |
| A2173G1 | FIXTURE-LENS AND SUPPORT ASSEMBLY | 1 | |
| A2173G700 | FIXTURE-LENS AND GASKET ASSEMBLING | 1 | |
| A2252P9 | FIXTURE-TORQUE MOTOR ASSEMBLY LINEUP | 1 | |
| A2367 | MOTOR ASSEMBLY HOLDING FIXTURE | 1 | |
| A27054-14 | FIXTURE-H0LDING, GEAR ASSEMBLY, LE SLAT DRIVE | 1 | |
| A27071-85 | FIXTURE ASSEMBLY | 1 | |
| A27072-55 | Fixture Assembly | 2 | |
| A27072-56 | Fixture Assembly | 1 | |
| A27119-1 | HOLDING FIXTURE EQUIPMENT - GEAR ASSEMBLY, LE SLAT DRIVE | 1 | |
| A27126-1 | HOLDING FIXTURE - INPUT ROD ASSEMBLY, ELEVATOR POWER CONTROL UNIT (PCU) | 3 | |
| A27127-1 | Checking Fixture -Input Rod Assembly. Elevator Pcu | 3 | |
| A27127-29 | CHECKING FIXTURE - INPUT ROD ASSEMBLY, ELEVATOR PCU | 8 | |
| A32042-1 | FIXTURE - FUNCTIONAL TEST, SIDE STRUT SPRING ASSEMBLY | 1 | |
| A32050-1 | TORQUE FIXTURE - ACTUATOR PISTON, MAIN LANDING GEAR (MLG) AND NOSE LANDING GEAR (NLG) | 2 | |
| A32058-1 | HOLDING FIXTURE - ACTUATOR LOCK, NOSE LANDING GEAR (NLG) | 1 | |
| A32072-1 | FIXTURE - FUNCTIONAL TEST, NOSE LANDING GEAR STEERING ACTUATOR | 1 | |
| A32084-1 | HOLDING FIXTURE - PISTON ROD, NOSE LANDING GEAR (NLG) LOCK ACTUATOR | 1 | |
| A32121-1 | FIXTURE EQUIPMENT - LANDING GEAR ACTUATOR ASSEMBLIES | 2 | |
| A34012-1 | Fixture - Test, Angle Of Attack Sensor | 2 | |
| A34012-19 | FIXTURE - TEST, ANGLE OF ATTACK SENSOR | 7 | |
| A34012-24 | TEST FIXTURE - ANGLE OF ATTACK FOR AOA SENSOR | 11 | |
| A340412-19 | FIXTURE- TEST, ANGLE OF ATTACK SENSOR | 1 | |
| A47143 | BRAKE ASSEMBLY FIXTURE | 1 | |
| A52017-1 | TEST FIXTURE - GEARBOX, OVERHEAD PASSENGER DOOR COUNTERBALANCE | 1 | |
| A685208 | LENGTH SETTING FIXTURE | 1 | |
| A685491 | ASSEMBLY FIXTURE | 1 | |
| A685491 PM | ASSEMBLY FIXTURE | 1 | |
| A71013-40 | FIXTURE SPACER ASSEMBLY | 5 | |
| A71013-45 | FIXTURE SPACER ASSEMBLY | 5 | |
| A78011-69 | FIXTURE - SUPPORT, THRUST REVERSER | 4 | |
| A78023-1 | REPAIR FIXTURE EQUIPMENT - PW4000 ENGINE THRUST REVERSER | 2 | |
| A78023-121 | REPAIR FIXTURE EQUIPMENT - PW4000 ENGINE THRUST REVERSER | 2 | |
| A78023-89 | REPAIR FIXTURE EQUIPMENT - PW4000 ENGINE THRUST REVERSER | 2 | |
| A813690T-4 | CLOUSER REMOVAL FIXTURE | 1 | |
| A813690T5 | DISC ASSEMBLY REMOVAL FIXTURE | 1 | |
| AA292579 | SPRING COMPRESSOR TOOL NO. AA292579 FOUR (4) REPLACEMENT HOSES FOR CYLINDER HEAD HYDRAULIC MOUNTING FIXTURE AA293268 | 1 | |
| AB27001-Y2F | HYDRAULIC ASSEMBLY PUMP WITH PRESSURE HOSESFIXTURE STRUT THSA | 1 | |
| AC1100-001 | AC1100-001;MAP-Series OPM remote head slider fixture | 1 | |
| AD-280245 | Hot Upset Fixture | 1 | |
| AD-280258 | Hot Upset Fixture | 1 | |
| AD-280284 | Hot Upset Fixture | 1 | |
| AD-280298 | Hot Upset Fixture | 1 | |
| AD-280306 | Hot Upset Fixture | 1 | |
| AD-280317 | Hot Upset Fixture | 1 | |
| AE5377 | FIXTURE ASSEMBLY | 1 | |
| AE5471 | FIXTURE ASSEMBLY | 1 | |
| AGE-01410-401 | FIXTURE SET, BACKLASH MEASUREMENT | 8 | |
| AGE-01623-401 | GSE FIXTURE, BACKLASH MEASUREMENT | 1 | |
| AGE-04267-401 | FIXTURE, BACKLASH MEASUREMENT AGE-01623-401 GSE 258 | 6 | |
| AGE-10043 | FIXTURE, ASSEMBLY HOLDING | 2 | |
| AGE-10379 | FIXTURE ASSEMBLY, HOLDING | 2 | |
| AGE-10802 | FIXTURE, ASSEMBLY, PROTECTION | 2 | |
| AGE-11432 | FIXTURE ASSEMBLY, HOLDING. FIXED WOBBLER | 2 | |
| AGE-11820 | FIXTURE, COMPRESSION ASEEMBLY | 2 | |
| AGE-11959 | SLEEVE ASSEMBLY FIXTURE | 1 | |
| AGE-13093 | FIXTURE, COMPRESSION ASEEMBLY | 3 | |
| AGE-13107 | FIXTURE, ASSEMBLY TAB BENDING | 4 | |
| AGE10032 | ASSEMBLY HOLDING FIXTURE | 3 | |
| AGE10040 | ASSEMBLY FIXTURE | 2 | |
| AGE10043 | ASSEMBLY HOLDING FIXTURE | 2 | |
| AGE10043A | ASSEMBLY HOLDING FIXTURE | 1 | |
| AGE10049 | Bearing Assembly Fixture | 2 | |
| AGE10049 (FBS-30129) | Bearing Assembly Fixture | 1 | |
| AGE10055 | Assembly Fixture | 2 | |
| AGE10063 | ASSEMBLY FIXTURE | 2 | |
| AGE10063 PM | ASSEMBLY FIXTURE | 1 | |
| AGE10153 | Assembly Fixture | 1 | |
| AGE10158 | HOLDING FIXTURE ASSEMBLY | 1 | |
| AGE10165 | BEARING PULLER FIXTURE ASSEMBLY | 1 | |
| AGE10337 | Holding Fixture Assembly | 2 | |
| AGE10347 | Assembly Holding Fixture | 1 | |
| AGE10379 | ASSEMBLY HOLDING FIXTURE | 2 | |
| AGE10396 | ASSEMBLY HOLDING FIXTURE | 1 | |
| AGE10802 | FIXTURE, ASSEMBLY, PROTECTION | 2 | |
| AGE10809 | SETTING FIXTURE | 1 | |
| AGE11066 | FIXTURE ASSEMBLY FILTER DELTA P | 2 | |
| AGE11432 | FIXTURE ASSEMBLY, HOLDING. FIXED WOBBLER | 2 | |
| AGE11591 | ASSEMBLY HOLDING FIXTURE | 1 | |
| AGE11598 | ASSEMBLY HOLDING FIXTURE | 1 | |
| AGE11603 | ASSEMBLY HOLDING FIXTURE | 1 | |
| AGE11633 | ASSEMBLY FIXTURE | 1 | |
| AGE11636 | FIXTURE INSERT | 2 | |
| AGE11667 | HOLDING FIXTURE ASSEMBLY, ROTOR | 2 | |
| AGE11813 | FIXTURE, ASSEMBLY HOLDING | 2 | |
| AGE11820 | ASSEMBLY FIXTURE COMPRESSION TOOL | 2 | |
| AGE11959 | SLEEVE ASSEMBLY FIXTURE | 1 | |
| AGE12246 | ASSEMBLY FIXTURE | 2 | |
| AGE12373-9 | Rotor Holding Fixture Insert | 1 | |
| AGE12654 | STAKING FIXTURE ASSEMBLY | 2 | |
| AGE12945 | PISTON ASSEMBLY FIXTURE | 1 | |
| AGE12973 | FIXTURE, ASSEMBLY PROTECTION | 2 | |
| AGE13093 | ASSEMBLY FIXTURE | 3 | |
| AGE13107 | FIXTURE, ASSEMBLY TAB BENDING | 4 | |
| AGE13122 | PROTECTION FIXTURE ASSEMBLY | 2 | |
| AGE13570 | FIXTURE ASSEMBLY, HOLDING | 1 | |
| AGE13578 | FIXTURE ASSEMBLY, HOLDING | 1 | |
| AGE13581 | FIXTURE, HOLDING, ASSEMBLY | 1 | |
| AGE13721 | FIXTURE ASSEMBLY, ACTUATOR ADJUSTMENT | 3 | |
| AGE13728-01 | ROTOR BALANCE ASSEMBLY FIXTURE | 1 | |
| AGE13728-02 | ROTOR BALANCE ASSEMBLY FIXTURE | 1 | |
| AGE13728-1 | FIXTURE-ROTOR BALANCE ASSEMBLY | 2 | |
| AGE13728-1,-2,-3,-4 | Rotor Balance Assembly Fixture | 1 | |
| AGE13728-2 | FIXTURE-ROTOR BALANCE ASSEMBLY | 2 | |
| AGE13728-3 | FIXTURE-ROTOR BALANCE ASSEMBLY | 2 | |
| AGE13728-4 | FIXTURE-ROTOR BALANCE ASSEMBLY | 2 | |
| AGE13845 | FIXTURE ASSEMBLY, TORQUING | 1 | |
| AGE13846 | ASSEMBLY FIXTURE | 1 | |
| AGE13858 | ASSEMBLY FIXTURE | 1 | |
| AGE13860 | ASSEMBLY FIXTURE | 1 | |
| AGE13885 | FLUSH FIXTURE 025323-500 & 765448 SERIES PUMPS | 1 | |
| AGE13982 | FIXTURE ASSEMBLY | 1 | |
| AGE14063 | Assembly Fixture | 2 | |
| AGE14074 | ASSEMBLY FIXTURE | 2 | |
| AGE14075 | FIXTURE, ASSEMBLY HOLDING | 2 | |
| AGE14076 | HOLDING FIXTURE, ASSEMBLY | 2 | |
| AGE14077 | FIXTURE, HOLDING, ASSEMBLY | 2 | |
| AGE14092 | FIXTURE, PRESSURE TEST, ASSEMBLY | 2 | |
| AGE14893 | ASSEMBLY, HOLDING FIXTURE | 1 | |
| AGE14900 | ASSEMBLY, STRAINER HOLDING FIXTURE | 1 | |
| AGE14961 | ASSEMBLY, TEST FIXTURE, AVS, 2.5 INCH | 1 | |
| AGE14963 | ASSEMBLY, TEST FIXTURE, VALVE, CHECK – 7.0 IN | 1 | |
| AGE14965 | ASSEMBLY, TEST FIXTURE, CAC OUTLET, 5 INCH | 1 | |
| AGE14968 | ASSEMBLY, FIXTURE, RAMAIR TEST, RAM AIR VALVE | 1 | |
| AGE14977 | ASSEMBLY, TEST FIXTURE, 7 INCH | 1 | |
| AGE15634 | Rotor Balance Assembly Fixture Head Support (Schenck) | 1 | |
| AGE15897 | JAM BLOCK FIXTURE ASSEMBLY | 1 | |
| AGE16272 | FIXTURE, ASSEMBLY | 1 | |
| AGE16273 | FIXTURE, ASSEMBLY | 1 | |
| AGE16275 | FIXTURE, ASSEMBLY | 1 | |
| AGE16276 | FIXTURE, SPRING ASSEMBLY | 1 | |
| AGE16568 | FIXTURE DISASSEMBLY, FEATHERING ASSEMBLY | 1 | |
| AGE18803 | TOGGLE ASSEMBLY SWAGE FIXTURE | 1 | |
| AGE18809 | STROKE SETTING FIXTURE | 1 | |
| AGE70523 | ROTOR ASSEMBLY LIFTING FIXTURE | 1 | |
| AGE70718 | Assembly Test Fixture | 1 | |
| AGE70768 | CARBON SEAL ASSEMBLY FIXTURE | 1 | |
| AGEI0043 | FIXTURE, ASSEMBLY HOLDING | 1 | |
| AGEI0379 | FIXTURE ASSEMBLY, HOLDING | 1 | |
| AID-00901 | NOZZLE DISASSEMBLY FIXTURE | 1 | |
| AID-01133 | ROTOR ASSEMBLY LIFTING FIXTURE | 1 | |
| AJ65B80482 | HOLDING FIXTURE - QUADRANT ASSEMBLY, ELEVATOR CONTROL | 1 | |
| AJ65B80511 | LOCATING FIXTURE - FORCE LIMITER ASSEMBLY | 1 | |
| AJ65B80859 | ASSEMBLY FIXTURE - SEQUENCE MECHANISM, SPEED BRAKE | 1 | |
| AKS-31282 | Assembly Fixture | 2 | |
| AKS-31282 | ASSEMBLY FIXTURE (2IT) | 2 | |
| AKS31282 | ASSEMBLY FIXTURE | 2 | |
| APN 10013677-S57-2 | ASSEMBLY FIXTURE | 1 | |
| APT19391 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| AR002A010 | FIXTURE-MOTOR ASSEMBLY | 1 | |
| AR024A001 | FIXTURE-SPRING LOAD SETTING | 1 | |
| AR024A010 | FIXTURE-MOTOR ASSEMBLY | 1 | |
| AR024X006 | FIXTURE-TORQUE SWITCH SETTING | 1 | |
| AR024X007 | FIXTURE-SWITCH SETTING | 1 | |
| AT-00228 | TRIUMPH LENGTH SETTING FIXTURE | 1 | |
| AT-70731 | Assembly Fixture, Compensator | 1 | |
| AT-70731 | Assembly Fixture, Compensator(2 ITEMS) | 1 | |
| AT-70732 | Assembly Fixture, Compensator | 1 | |
| AT-71593 | Assembly Fixture, Relief Valve | 1 | |
| AT-71603 | Installing Fixture, Elevator Compensator Seat | 1 | |
| AT-71604 | Installation Fixture, Compensator Seat | 1 | |
| AT1648 | VALVE ASSEMBLY FIXTURE | 1 | |
| AT201 1 -0-1 | ACTUATOR PRE-SETTING AND TORQUE TEST FIXTURE, | 1 | |
| AT2011-0-1 | PRE SETTING AND TORQUE TEST FIXTURE | 1 | |
| AT50332 | AMPLIFIER ASSEMBLY FIXTURE | 1 | |
| AT5284 | FIXTURE SWITCH SETTING | 1 | |
| AT55730 | FIXTURE ASSEMBLY | 1 | |
| AT55772 | Test fixture used for testing electrical and bonding | 1 | |
| AT55773 | WLG leg assembly test fixture (support leg assembly while testing) | 1 | |
| AT65-44835 | Bearing Assembly Fixture | 1 | |
| AT65-44835PM | BEARING ASSEMBLY FIXTURE - INSTALLING BEARINGS FOR INPUT SHAFT ASSEMBLY AT65-44835 | 1 | |
| ATE2631-001 | FIXTURE-MANIFIOLD ASSEMBLY | 1 | |
| B20005-52 | TEST EQUIPMENT SENSOR FIXTURE | 3 | |
| B27031-16 | CHECKING FIXTURE - ELEVATOR POGO ROD ASSEMBLY | 3 | |
| B32026-1 | FIXTURE - STAKING, ACTUATOR, NOSE LANDING GEAR LOCK | 3 | |
| B32030-1 | FIXTURE - LOCK ACTUATOR, OVERHAUL EQUIPMENT, NOSE LANDING GEAR (NLG) | 3 | |
| B32031-2 | Torquing Fixture Assembly | 3 | |
| B32031-4 | Gland Torquing Fixture Assembly | 3 | |
| B32031-6 | Rod End Torquing Fixture Assembly | 3 | |
| B32045-1 | LOCATING FIXTURE - VALVE, GEAR OPERATED SEQUENCE, NOSE LANDING GEAR (NLG) | 4 | |
| B32045-11 | LOCATING FIXTURE - VALVE, GEAR OPERATED SEQUENCE, NOSE LANDING GEAR (NLG) | 4 | |
| B32050-1 | ASSEMBLY FIXTURE - MAIN LANDING GEAR (MLG) | 2 | |
| B32050-50 | ASSEMBLY FIXTURE - MAIN LANDING GEAR (MLG) | 2 | |
| B32064-1 | RIGGING FIXTURE - MAIN LANDING GEAR DOOR OPERATED SEQUENCE VALVE ASSEMBLY | 1 | |
| B34001 | TEST FIXTURE - POWER SUPPLY CARDS/CONTROL PANEL ASSEMBLY | 1 | |
| B34001-1 | TEST FIXTURE - POWER SUPPLY CARDS/CONTROL PANEL ASSEMBLY | 1 | |
| B52007 | TEST FIXTURE -0 PASSENGER DOOR LATCHING | 1 | |
| B52007-1 | TEST FIXTURE - PASSENGER DOOR LATCHING MECHANISM | 2 | |
| B52010-1 | FIXTURE - BACKLASH, NUMBER 1 & 2 DOOR MANUAL DRIVE GEARBOX ASSEMBLY | 1 | |
| B54004 | PRELOAD FIXTURE EQPT -0 STRUT, PW2000 SERIES | 1 | |
| B54004-13 | PRELOAD FIXTURE EQUIPMENT - STRUT, PW2000 SERIES ENGINES | 5 | |
| B71021-1 | PROOF LOAD FIXTURE - ENGINE HANDLING EQUIPMENT, PW2000 SERIES | 3 | |
| B71026 | PROOF LOAD FIXTURE -0 T/R SLING, PW2000 SERIES | 1 | |
| B71026-1 | PROOF LOAD FIXTURE - THRUST REVERSER SLING, PW2000 | 2 | |
| B78004-1 | RIGGING FIXTURE - SPRING BUMPER, FAN DUCT COWL AND THRUST REVERSER | 3 | |
| B78005 | BONDING FIXTURE -0 THRUST REVERSER SLEEVE ASSY | 1 | |
| B78005-1 | BONDING FIXTURE - THRUST REVERSER SLEEVE ASSEMBLY | 3 | |
| B78008-19 | TEST FIXTURE - ROD END AND STROKE STOP, LOCKING AND NON-LOCKING THRUST REVERSER ACTUATOR | 12 | |
| B78011-1 | Torque Fixture - Locking and Non-Locking Thrust Reverser Actuator | 1 | |
| B78011-25 | TORQUE FIXTURE - LOCKING AND NON-LOCKING THRUST REVERSER ACTUATOR ASSEMBLY | 9 | |
| B78014-1 | Test Fixture - Locking and Non-Locking Thrust Reverser Actuator | 1 | |
| B78014-29 | Test Fixture - Rod End and Stroke Stop, Locking and Non-locking Thrust Reverser Actuator | 4 | |
| B78014-37 | Test Fixture - Rod End and Stroke Stop, Locking and Non-locking Thrust Reverser Actuator | 8 | |
| BFG179-221 | FIXTURE INSERT SUPPORT | 1 | |
| BL49588 | FIXTURE-RIGGING, RUDDER SERVO CONTROL | 1 | |
| BL52550 | TEST FIXTURE FOR SERVO CONTROL | 1 | |
| BOF65B07950 | BORING FIXTURE - TRUNNION FITTING ASSEMBLY, NOSE LANDING GEAR | 1 | |
| BOF767LS311T4185 | BORING FIXTURE LOWER SPAR FITTING ASSEMBLY | 1 | |
| BOFAOGTOOL747LG00 | BORING FIXTURE -0 FITTING ASSY-TRUNNION NOSE | 1 | |
| BOFAOGTOOL747LG0013 | BORING FIXTURE FITTING ASSEMBLY - TRUNNION, NOSE LANDING GEAR | 1 | |
| C0M1644 | FIXTURE - TRACK SETTING | 1 | |
| C202-32-0711 | SEAL PRESS FIXTURE | 1 | |
| C27005-1 | Assembly Fixture - Elevator Feel and Centering Unit | 1 | |
| C27005-19 | Assembly Fixture - Elevator Feel and Centering Unit | 3 | |
| C27026-1 | Test Fixture - Brake Assembly, Stabilizer Trim Actuator | 1 | |
| C27026-14 | Test Fixture - Brake Assembly, Stabilizer Trim Actuator | 1 | |
| C27026-24 | Test Fixture - Brake Assembly, Stabilizer Trim Actuator | 9 | |
| C27082-2 | Fixture assembly | 1 | |
| C27206 | FIXTURE,POSITIONING-TMF SEAL | 1 | |
| C27206G01 | FIXTURE,POSITIONING-TMF SEAL | 1 | |
| C32008-1 | Holding Fixture -Main Landing Gear Damper Assembly | 3 | |
| C32027 | Lever Assembly Holding Fixture | 1 | |
| C32036-1 | Fixture Equipment - Actuator Assemblies, Nose Landing Gear | 2 | |
| C32036-101 | FIXTURE EQUIPMENT - ACTUATOR ASSEMBLIES, NOSE LANDING GEAR | 1 | |
| C32036-45 | Fixture Equipment - Actuator Assemblies, Nose Landing Gear | 5 | |
| C32036-46 | Fixture Equipment - Actuator Assemblies, Nose Landing Gear | 4 | |
| C32036-88 | Fixture equipment-actuator assemblies，nose landing gear | 1 | |
| C32036-92 | FIXTURE EQUIPMENT - ACTUATOR ASSEMBLIES, NOSE LANDING GEAR | 7 | |
| C32037-2 | Fixture Assembly | 1 | |
| C32045-1 | FIXTURE SEAL CHANGE | 3 | |
| C32045-23 | Holding Fixture - Seal Change, Main Landing Gear | 5 | |
| C32045-63 | HOLDING FIXTURE - SEAL CHANGE, MAIN LANDING GEAR | 4 | |
| C32046-1 | Holding Fixture Equipment - Shimmy Damper Assembly, Main Landing Gear | 10 | |
| C32046-2 | Holding Fixture Assembly | 1 | |
| C32046-25 | HOLDING FIXTURE EQUIPMENT - SHIMMY DAMPER ASSEMBLY, MAIN LANDING GEAR | 3 | |
| C32053-1 | Fixture Equipment - Side Strut Assembly, Main Landing Gear | 3 | |
| C32053-2 | Fixture Assembly | 1 | |
| C32053-3 | Fixture Assembly | 1 | |
| C32053-37 | FIXTURE EQUIPMENT - SIDE STRUT ASSEMBLY, MAIN LANDING GEAR | 5 | |
| C32053-41 | FIXTURE EQUIPMENT - SIDE STRUT ASSEMBLY, MAIN LANDING GEAR | 5 | |
| C32053-42 | FIXTURE ASSEMBLY | 1 | |
| C32053-50 | FIXTURE EQUIPMENT - SIDE STRUT ASSEMBLY, MAIN LANDING GEAR | 1 | |
| C32063-1 | HOLDING FIXTURE - SEAL CHANGE, MAIN LANDING GEAR | 1 | |
| C32076-1 | DISASSEMBLY/ASSEMBLY FIXTURE - SHOCK STRUT, MAIN LANDING GEAR | 1 | |
| C52001-1 | Holding Fixture - Compressed Spring Cartridge | 4 | |
| C52004 | HOLDING FIXTURE - COMPRESSED SPRING CARTRIDGE | 1 | |
| C52004-1 | HOLDING FIXTURE - COMPRESSED SPRING CARTRIDGE | 11 | |
| C78027-1 | Torque Fixture - Locking and Non-Locking Thrust Reverser Actuator Assembly | 4 | |
| C78027-2 | FIXTURE ASSEMBLY | 1 | |
| C78029-1 | Repair Fixture Eqpt-Thrust Reverser-CFM56-3 | 2 | |
| C78029-2 | REPAIR FIXTURE EQUIPMENT - THRUST REVERSER, CFM56-3 | 2 | |
| C78029-3 | REPAIR FIXTURE EQUIPMENT - THRUST REVERSER, CFM56-3 | 2 | |
| CA21038K-100 | CHECKING FIXTURE - ELEVATOR POGO ROD ASSEMBLY | 1 | |
| CAT5663-7 | ASSEMBLY FIXTURE | 1 | |
| CAT5665-5 | ASSEMBLY/TEST FIXTURE | 1 | |
| CF1126 | FIXTURE, SETTING | 2 | |
| CF65B05501 | FIXTURE ASSEMBLY - RUDDERS HINGE ALIGNMENT | 1 | |
| CF65B05700 | FIXTURE ASSEMBLY - HINGE ALIGNMENT, ELEVATORS | 1 | |
| CF65B40907 | CHECK FIXTURE - PRESSURE RELIEF VALVE ASSEMBLY, AIR CONDITIONING | 1 | |
| CF65B80511 | TEST AND BUILD FIXTURE - FORCE LIMITERS AND BUNGEE ASSEMBLIES | 1 | |
| CF65B80578 | CHECK FIXTURE - QUADRANT LEVER AND BRACKET ASSEMBLY, INBOARD SPOILER | 1 | |
| CF65B81126 | CHECK FIXTURE - OUTBOARD TRANSMISSION ASSEMBLY, OUTBOARD TRAILING EDGE FLAP DRIVE | 1 | |
| CF65B81127 | CHECK FIXTURE - INBOARD TRANSMISSION ASSEMBLY, OUTBOARD TRAILING EDGE FLAP DRIVE | 1 | |
| CF65B81128 | CHECK FIXTURE - OUTBOARD TRANSMISSION ASSEMBLY, INBOARD TRAILING EDGE FLAP DRIVE | 1 | |
| CF65B81129 | CHECKING FIXTURE - INBOARD TRANSMISSION ASSEMBLY, INBOARD TRAILING EDGE FLAP DRIVE | 1 | |
| CF65B82106 | SPRING CHECKING FIXTURE - LOAD LIMITER ASSEMBLY, AILERON CONTROL | 1 | |
| CF65B82986 | CHECK FIXTURE - BACKLASH CF65B82986 GEARBOX ASSEMBLY, INBOARD LEADING EDGE FLAP DRIVE | 1 | |
| CHA700-092 | ASSEMBLY FIXTURE | 1 | |
| CHA705-654 | ASSEMBLY FIXTURE | 1 | |
| CHA723-1110 | ASSEMBLY FIXTURE | 1 | |
| CJ5616-6E | SHOCK STRUT ASSEMBLY FIXTURE | 1 | |
| CPN676-5328-001 | NOISE TEST FIXTURE | 1 | |
| CPWA-30452 | Fixture – Aligning, Compressor Rotor Assembly | 1 | |
| CT22457 | RESCU 406 (SE) ™ ELT TEST FIXTURE/ ADAPTER | 1 | |
| CTR5643-9E | ASSEMBLY FIXTURE | 1 | |
| CTR5813-3 | UPLOCK ASSEMBLY TEST FIXTURE | 1 | |
| CTR5815-5 | TEST FIXTURE, DRAG BRACE ASSEMBLY | 1 | |
| D630P8001101 | ASSEMBLY/DISASSEMBLY FIXTURE | 1 | |
| DAF1050 | ASSEMBLY/DISAMSSEMBLY FIXTURE KIT | 1 | |
| DAH601979 | FIXTURE-SETTING AND HOLDING | 1 | |
| DAH602281 | FIXTURE ASSEMBLY | 1 | |
| DAH602282 | FIXTURE ASSEMBLY | 1 | |
| DAH602283 | FIXTURE ASSEMBLY | 1 | |
| DAH602288 | FIXTURE ASSEMBLY | 1 | |
| DFGDS | RESERVED FOR F100 FIXTURE TOOL IN CB01, AWAITING EO NUMBER | 1 | |
| DJS-25014 | Assembly Fixture | 1 | |
| DRT 65702 | DRT 65702 SETTING FIXTURE | 1 | |
| DRT174137 | assembly fixture (3IT) | 1 | |
| DRT65702 | Setting Fixture | 1 | |
| DRT65702PM | DRT 65702 SETTING FIXTURE | 1 | |
| E 51417 | SPRING ASSEMBLY & DISASSEMBLY FIXTURE | 1 | |
| E00329 | AMPLIFIER-FIRST STADE BODY ASSEMBLY FIXTURE | 1 | |
| E00332 | HOLDING FIXTURE FIRST STAGE ASSEMBLY | 1 | |
| E0329 | TMA AMP BODY ASSEMBLY FIXTURE | 1 | |
| E50500-7 | PERFORMANCE FIXTURE ASSEMBLY | 1 | |
| E53800-1 | Assembly Fixture, Rudder | 1 | |
| E59207 | SWAGING FIXTURE ASSEMBLY | 1 | |
| E66447-003 | TEST FIXTURE ASSEMBLY | 1 | |
| E71664 | TEST FIXTURE ASSEMBLY. | 1 | |
| Ex-92647 | Fixture-holding, nose bearing plate | 1 | |
| Ex-97184 | Fixture-holding, nose bearing plate | 1 | |
| Ex-98304 | Fixture-holding, diffuser scroll | 1 | |
| F-1487 | Fixture, Block Pin Setter | 1 | |
| F-1704 | Fixture, Ball Setter | 1 | |
| F-1896 | Fixture, Shock Assembly | 1 | |
| F-2446 | Fixture, Shock Assembly | 1 | |
| F-2601 | Fixture, Assembly | 1 | |
| F-2602 | Fixture, Assembly | 1 | |
| F-2603 | Fixture, Assembly | 1 | |
| F-2604 | Fixture, Assembly | 1 | |
| F-2605 | Fixture, Assembly | 1 | |
| F-2606 | Fixture, Assembly | 1 | |
| F-2608 | Fixture, Shock Assembly | 1 | |
| F-2610 | Fixture, Air Bleeder Hose | 1 | |
| F-3501734-1 | OIL GEAR PUMP ASSEMBLY FIXTURE | 1 | |
| F1000884 | HOLDING FIXTURE FOR HOUSING SUBASSEMBLY | 1 | |
| F1276386 | VISE FIXTURE FOR TUBE PLUG | 1 | |
| F27209 | BENCH SETTING FIXTURE | 1 | |
| F2MA927522 | SET OF BACKLASH MEASURING FIXTURES | 1 | |
| F4423 | FIXTURE-PISTON ASSEMBLY | 1 | |
| F532-R1060-000W2300-01 | SET OF DRILLING FIXTURES FOR FRAME SHELL MDCD-HIN | 1 | |
| F532-R1130-000W2300-01 | DRILLING FIXTURE FOR SEAT RAIL CUT-OFF POINT S14/S1 | 1 | |
| F65-0-3098-29 | Detail 29, Nose Gear Steering Test Fixture | 1 | |
| F65-0-3098-41 | Detail 41 (DLD Cover Plate), Nose Gear Steering Test Fixture | 1 | |
| F65-0-3098-42 | Nose Gear Steering Test Fixture Detail 42 (Compensator Cap) | 1 | |
| F65-0-3218 | TARE FIXTURE 737-300 THRUST REVERSER VALVE | 2 | |
| F70183 | FIXTURE ASSY -0 SERVO TORQUE MEASUREMENT TO TAKE | 1 | |
| F70183-500 | Fixture assy-servo，torque measurement | 1 | |
| F70250-3 | Lifting Fixture Assembly -Main Cargo Door | 2 | |
| F70250-35 | LIFTING FIXTURE ASSEMBLY - MAIN CARGO DOOR | 3 | |
| F70250-36 | LIFTING FIXTURE ASSEMBLY - MAIN CARGO DOOR | 3 | |
| F70320-15 | SHAFT - HOLDING FIXTURE, CONTROL COLUMN (SHAFT F70320-15 IS PART OF BASE F70320-2 INCLUDED KIT F70320-1) | 1 | |
| F71196 | FIXTURE ASSY -0 ACTUATOR LOADER TEST USED;TO | 1 | |
| F72770 | TEST FIXTURE -0 NOSE GEAR TRUNNION SWIVEL USED | 1 | |
| F72786-101 | CALIB FIXTURE AIR FLOW SENSOR | 6 | |
| F72786-181 | FIXTURE - TEST, ANGLE OF ATTACK SENSOR, CONRAC AOA'S | 12 | |
| F72786-3 | FIXTURE ANGLE OF AIRFLOW SENSOR | 1 | |
| F72804 | HOLDING FIXTURE -0 FLAP TRANSMISSION USED TO | 1 | |
| F72814 | FIXTURE ASSEMBLY -0 MAIN GEAR ACTUATOR TO | 1 | |
| F72828 | ALIGNMENT FIXTURE -0 THRUST REVERSER TO CHECK | 1 | |
| F72831-1 | TEST FIXTURE ASSEMBLY - FLAP POSITION TRANSMITTER | 1 | |
| F72831-10 | TEST FIXTURE ASSEMBLY - FLAP POSITION TRANSMITTER | 1 | |
| F72831-14 | TEST FIXTURE ASSEMBLY - FLAP POSITION TRANSMITTER | 1 | |
| F72831-21 | Test Fixture Assembly -Flap Position Transmitter | 1 | |
| F72850 | FIXTURE ASSEMBLY -0 OUTBOARD WING FLAP TO | 1 | |
| F72851 | FIXTURE ASSEMBLY -0 INBOARD WING FLAP TO INSTALL | 1 | |
| F72851-1 | FIXTURE ASSEMBLY -0 INBOARD WING FLAP TO | 1 | |
| F72857-1 | FIXTURE ASSY -0 ANGLE OF AIRFLOW SENSOR THIS IS | 1 | |
| F72919 | TEST FIXTURE -0 PRESSURE OPERATED SELECTOR VALVE | 1 | |
| F72919-1 | TEST FIXTURE - PRESSURE OPERATED SELECTOR VALVE ASSEMBLY | 1 | |
| F72926 | DRILL FIXTURE KIT -0 REWORK, STATIC PORT USED TO | 1 | |
| F72947 | TEST FIXTURE SET -0 POWER CONTROL UNIT, FLIGHT | 1 | |
| F72947-163 | TEST FIXTURE SET | 1 | |
| F72952-16 | Fixture Thrust Reverser | 6 | |
| F72952-17 | Fixture Thrust Reverser | 5 | |
| F73003 | FIXTURE-NOSE LANDING GEAR BUILD-UP USED TO | 1 | |
| F80-0-1324 | ASSEMBLY FIXTURE | 1 | |
| F80-0-2772 | ASSEMBLY FIXTURE | 1 | |
| F80-0-4231 | Assembly Fixture | 1 | |
| F80-0-4889 | Assembly Holding Fixture | 14 | |
| F80-0-4949 | VALVE ASSEMBLY FIXTURE | 1 | |
| F80-0-4982 | ASSEMBLY FIXTURE | 1 | |
| F80-0-50401 | ASSEMBLY FIXTURE | 1 | |
| F80-0-50401PM | ASSEMBLY FIXTURE | 1 | |
| F80-0-50456 | ASSEMBLY FIXTURE | 1 | |
| F80-0-50456PM | ASSEMBLY FIXTURE | 1 | |
| F80-0-50650 | ASSEMBLY FIXTURE | 1 | |
| F80-0-51228 | ASSEMBLY FIXTURE | 1 | |
| F80-0-52363 | ASSEMBLY FIXTURE | 1 | |
| F80-0-56350 | ASSEMBLY FIXTURE | 1 | |
| F80-0-5812 | MOTOR OPERATED VALVE ASSEMBLY FIXTURE | 1 | |
| F80-0-5840 | MOTOR OPERATED VALVE ASSEMBLY FIXTURE | 1 | |
| F80-0-5881 | PIN/SHAFT ASSEMBLY FIXTURE | 1 | |
| F80-0-5910 | RETAINER ASSEMBLY FIXTURE | 1 | |
| F80085-1 | Test Fixture - Cylinder Assembly, Feel Actuator | 4 | |
| F80085-12 | Test Fixture - Cylinder Assembly, Feel Actuator | 4 | |
| F80088-1 | HOLDING FIXTURE NOSE GEAR UPPER ORIFICE SUPPORT TU | 1 | |
| F80088-1 -3 | Holding Fixture -Upper Orifice Support Tube. Nose Gear | 1 | |
| F80088-3 | HOLDING FIXTURE - UPPER ORIFICE SUPPORT TUBE, NOSE GEAR | 2 | |
| F80096-4 | Holding Fixture-Fwd Trunion Bearing House MLG | 10 | |
| F80096-7 | HOLDING FIXTURE-FWD TRUNION BEARING HOUSE MLG | 6 | |
| F80166-1 | FIXTURE: TEST, USE F80166-1=AG | 26 | |
| F80180-1 | FIXTURE SET | 1 | |
| F80189-1 | Holding Fixture -Brake Valve Assembly | 1 | |
| F80224-50 | TEST FIXTURE SET EQUIPMENT | 1 | |
| F80232-1 | Test Fixture - Control Valve Assembly, Trailing Edge Flap | 3 | |
| F80323-1 | TEST FIXTURE -CONTROL VALVE ASSEMBLY,TRAILING EDGE FLAP | 1 | |
| FAJ35-19764-1 | NOSE COWL ALIGNMENT FIXTURE | 1 | |
| FAJ35-19764-2 | NOSE COWL ALIGNMENT FIXTURE | 1 | |
| FBS-30106 | Assembly Fixture | 1 | |
| FBS-30129 | Bearing Assembly Fixture | 1 | |
| FBS-39920 | Assembly Holding Fixture | 1 | |
| FBS30106 | ASSEMBLY FIXTURE | 1 | |
| FBS32473 | ASSEMBLY HOLDING FIXTURE | 1 | |
| FBS35293 | FIXTURE PRESET FOR EJECTION JACK AY 730820 | 1 | |
| FBS35821 | SETTING FIXTURE | 1 | |
| FDS-10408 | Assembly Fixture | 1 | |
| FDS-10708 | FIXTURE, ASSEMBLY, HOLDING | 1 | |
| FDS-1953 | Assembly Fixture | 1 | |
| FDS-32136 | Assembly Fixture | 1 | |
| FDS-32140 | FIXTURE, ASSEMBLY, HOLDING | 2 | |
| FDS-32473 | Assembly Holding Fixture | 1 | |
| FDS-33295 | ASSEMBLY HOLDING FIXTURE | 1 | |
| FDS-34302 | FIXTURE, ASSEMBLY, HOLDING | 2 | |
| FDS-34332 | FIXTURE, ASSEMBLY, HOLDING | 1 | |
| FDS-34702 | FIXTURE, ASSEMBLY, HOLDING | 2 | |
| FDS-35831 | Assembly Fixture | 1 | |
| FDS-35889 | Assembly Holding Fixture | 1 | |
| FDS-36315 | Assembly Holding Fixture | 1 | |
| FDS-36638 | FIXTURE, ASSEMBLY, HOLDING | 2 | |
| FDS-39914 | Assembly Holding Fixture | 1 | |
| FDS-43925 | Assembly Holding Fixture | 1 | |
| FDS10708 | ASSEMBLY FIXTURE | 1 | |
| FDS32140 | ASSEMBLY FIXTURE | 2 | |
| FDS32473 | ASSEMBLY HOLDING FIXTURE | 1 | |
| FDS34302 | ASSEMBLY HOLDING FIXTURE | 2 | |
| FDS34702 | ASSEMBLY HOLDING FIXTURE | 2 | |
| FDS35293 | PRESET FIXTURE | 1 | |
| FDS35778 | ASSEMBLY HOLDING.FIXTURE | 1 | |
| FDS35822 | ASSEMBLY HOLDING FIXTURE DELETED | 1 | |
| FDS35831 | ASSEMBLY FIXTURE | 1 | |
| FDS35889 | ASSEMBLY HOLDING FIXTURE | 1 | |
| FDS37455 | ASSEMBLY HOLDING FIXTURE | 1 | |
| FDS37459 | ASSEMBLY HOLDING FIXTURE | 1 | |
| FDS38732 | ASSEMBLY HOLDING FIXTURE | 1 | |
| FDS400-223 | ASSEMBLY HOLDING FIXTURE | 2 | |
| FI000884 | HOLDING FIXTURE FOR HOUSING SUBASSEMBLY | 1 | |
| FS0025 | SET JIG VALVE FIXTURE | 1 | |
| FV135-3-901 | Assembly Fixture | 1 | |
| FV135-3-901PM | ASSEMBLY FIXTURE | 1 | |
| FXT-10773 | ASSEMBLY FIXTURE | 1 | |
| FXT-11194 | ASSEMBLY FIXTURE | 1 | |
| FXT-11532 | ASSEMBLY FIXTURE | 1 | |
| FXT-12254 | PRESSURE SENSOR TEST FIXTURE | 1 | |
| FXT-14336-P12 | ASSEMBLY/ TEST FIXTURE(CART) | 1 | |
| FXT-14336-P13 | ASSEMBLY/ TEST FIXTURE(CART) | 1 | |
| FXT-14336-P18 | ASSEMBLY/ TEST FIXTURE(CART) | 1 | |
| FXT-14336-P19 | ASSEMBLY/ TEST FIXTURE(CART) | 1 | |
| FXT-14338 | ASSEMBLY FIXTURE | 1 | |
| FXT-14338 | Assembly Test Fixture | 1 | |
| FXT-15875 | ASSEMBLY FIXTURE | 1 | |
| G27014-15 | LOAD TEST FIXTURE - LOWER RUDDER SLING ASSEMBLY (CE) | 1 | |
| G32057-1 | TEST SUPPORT FIXTURE - TP SENSOR DEACTUATOR KIT | 2 | |
| G34001 | CALIBRATION FIXTURE -0 ANGLE OF ATTACK SENSOR | 1 | |
| G34001-1 | CALIBRATION FIXTURE - ANGLE OF ATTACK SENSOR | 1 | |
| G34001-2 | CALIBRATION FIXTURE - ANGLE OF ATTACK SENSOR | 1 | |
| G34002-1 | FIXTURE - TEST, ANGLE OF ATTACK SENSOR, CONRAC AOA'S | 21 | |
| G34002-5 | Check Fixture - Ang Of Attk Sens | 7 | |
| G34002-7 | SET FIXTURE | 1 | |
| G600-270014-1 | GSE 27-20-02 FIXTURE - RUDDER RIGGING | 3 | |
| G600-272002-1 | FIXTURE LASER RUDDER RIGGING & NEUTRAL POSITION | 1 | |
| G601-780002-114 | FIXTURE PDU ASSEMLY | 1 | |
| G685208 | LENGTH SETTING FIXTURE | 1 | |
| G685208PM | LENGTH SETTING FIXTURE | 1 | |
| G700-272102-169 | FIXTURE LASER RUDDE | 1 | |
| G700-272102-179 | FIXTURE LASER RUDDE | 5 | |
| G700-301101-1 | Drill Fixture - Wing Anti-Ice Sensor | 1 | |
| G700-301101-1/-2 | Drill Fixture - Wing Anti-Ice Sensor | 1 | |
| G700-301101-2 | Drill Fixture - Wing Anti-Ice Sensor | 1 | |
| G76003-1 | TEST FIXTURE - CONTROL STAND MICROSWITCH PACK ASSEMBLY | 1 | |
| G76003-23 | TEST FIXTURE CONTROL STAND SWITCH PACK ASSEMBLY | 1 | |
| G9 | CHARGING FIXTURE INSERT | 1 | |
| GE-FQAP-302F | HIGH SPEED GUIDE FIXTURE FOR USE WITH THE HOCKING MINI ROTOR PN: 33A100 | 1 | |
| GE-FQAP-302G | HIGH SPEED GUIDE FIXTURE FOR USE WITH THE OLYMPUS MINIMITE ROTOR | 1 | |
| GS10420 | BELLOWS ASSEMBLY FIXTURE | 1 | |
| GS10747 | FIXTURE ASSEMBLE | 1 | |
| GS10751 | SPACER ASSEMBLY FIXTURE | 1 | |
| GS10814 | FIXTURE SENSOR ASSY | 1 | |
| GS10888 | FIXTURE BALL SEAT & GA | 1 | |
| GS11063 | FIXTURE SENSOR | 1 | |
| GS11447 | FIXTURE HOLDING LM SEN | 1 | |
| GS11451 | FIXTURE CALIB LM SENSO | 1 | |
| GS11458 | FIXTURE SERVO DIFFUSSE | 1 | |
| GS12552-1 | HOSE ASSY PITCHLOCK TEST FIXTURE | 1 | |
| GS12552-2 | HOSE ASSY PITCHLOCK TEST FIXTURE | 1 | |
| GS12954-1 | FIXTURE, AIR INLET SERVO CHAMBER | 2 | |
| GS13050-1 | FIXTURE, SEAL COMPRESSING | 1 | |
| GS13165-1 | Rotative Assembly Holding Fixture | 2 | |
| GS13262-1 | FIXTURE-TEST SPD BIAS SERVO | 1 | |
| GS13292 | FIXTURE, ASSEMBL | 1 | |
| GS13381 | FIXTURE SEAL COMPRESSI | 1 | |
| GS13405-1 | TV WINDOW SETTING FIXTURE | 1 | |
| GS13569 | FIXTURE RESET LEVER | 1 | |
| GS13808-1 | FIXTURE-ADJUSTMENT N, SERVO | 1 | |
| GS13809-1 | FIXTURE, SERVO POSITION | 1 | |
| GS14147-1 | Heat Set Fixture | 2 | |
| GS14242-1 | SETTING FIXTURE | 1 | |
| GS14247-1 | SWITCH, SETTING FIXTURE | 1 | |
| GS14542-1 | POPPET SEAT FIXTURE | 1 | |
| GS14670-1 | SW SETTING FIXTURE | 1 | |
| GS14698-1 | FIXTURE, BEARING INSERTER | 1 | |
| GS15428-1 | HEAT SETTING FIXTURE | 1 | |
| GS15429-1 | FIXTURE HEAT SETTINGS | 1 | |
| GS15859-1 | FIXTURE LEAKAGE VALVE SET | 1 | |
| GS15860-1 | FIXTURE LEAKAGE VALVE SET | 1 | |
| GS19468-1 | FIXTURE, SEAL COMPRESSION | 1 | |
| GS19621-1 | Heat Set Fixture | 2 | |
| GS19623-1 | Heat Set and Bond Fixture | 2 | |
| GS19647-1 | FIXTURE, ASSEMBLY | 1 | |
| GS19667-1 | FIXTURE, ASSEMBLY | 3 | |
| GS19707-1 | FIXTURE-SEATING | 1 | |
| GS19712-1 | FIXTURE, SUPPORT RESET HOUSING | 1 | |
| GS20023-1 | FIXTURE, CHEVRON SEAL | 1 | |
| GS20154-1 | FIXTURE TEST TEMP , SENSOR | 2 | |
| GS20246-1 | FIXTURE, KEY INSERTER | 1 | |
| GS20246-2 | FIXTURE, KEY INSERTER | 1 | |
| GS20383-1 | FIXTURE, POWER ARM ASSEMBLY | 1 | |
| GS20395-1 | FIXTURE, ASSEMBLY AND TEST | 1 | |
| GS20414-1 | SERVO MECHANISM ADJUSTMENT DEVICE (TURNING FIXTURE) | 6 | |
| GS20788-1 | FIXTURE, PROPELLER ASSEMBLY | 2 | |
| GS21248-1 | FIXTURE ASSY, STOP PLATE SETTING | 1 | |
| GS21586-1 | NOZZLE SETTING FIXTURE | 2 | |
| GS21607-1 | CLOSE STOP FIXTURE | 1 | |
| GS21911-1 | Heat Set and Bond Fixture | 2 | |
| GS21912-1 | Heat Set Fixture | 2 | |
| GS21913-1 | Heat Set and Bond Fixture | 2 | |
| GS21970-1 | NOZZLE SETTING FIXTURE | 2 | |
| GS22266-1 | Sensor Test Fixture | 2 | |
| GS22519-1 | Assembly Fixture | 2 | |
| GS22826-1 | FIXTURE, DIFFUSER HOLDING | 1 | |
| GS23467-1 | SECONDARY QUILL SHIPPING FIXTURE | 1 | |
| GS23478-1 | SWITCH SETTING FIXTURE | 1 | |
| GS25308-1 | HEAT SET FIXTURE | 1 | |
| GS25565-1 | GSE 499 TEST FIXTURE ASSY, LOW-STAGE BLEED CHECK-VALVE | 7 | |
| GSB5231001 | TEST FIXTURE P/N: GSB5231001 TO BE USED IN TESTING JXH AFT BAGGAGE DOOR GAS SPRINGS INTEGRITY. | 1 | |
| GSE 27-20-01 | GSE 27-20-02 FIXTURE - RUDDER RIGGING | 1 | |
| GSE343 | ASSEMBLY FIXTURE | 1 | |
| GSE425 | ASSEMBLY FIXTURE - PISTON | 1 | |
| GSE4900047 | AUXILIARY POWER UNIT LIFTING FIXTURE-GSE4900047 | 1 | |
| H102021-5 | PRIMARY AIR INLET SEALING FIXTURE | 1 | |
| H102021-7 | SECONDARY AIR INLET SEALING FIXTURE | 1 | |
| H102076 | RAM AIR INLET SEALING FIXTURE | 1 | |
| H102103 | RAM AIR INLET SEALING FIXTURE | 1 | |
| H301ABV204M | ASSEMBLY FIXTURE | 1 | |
| HC131H0069-000 | FIXTURE SETTING STALL VANE | 1 | |
| HC131H0069-002 | Fixture, Setting Stall Vane | 6 | |
| HH-101777 | Hot Upset Fixture | 1 | |
| HH-102110 | Hot Upset Fixture | 1 | |
| HLPTNK1101301-501 | CONFORMAL FUEL TANK TRANSPORTATION/STORAGE FIXTURE SET | 1 | |
| HS 8065 | FIXTURE, FILTER ASSEMBLY | 2 | |
| HS7018 | FIXTURE TEMP SENSING T | 1 | |
| HS7167 | FIXTURE SENSITI | 1 | |
| HS7537 | ASSEMBLY FIXTURE | 1 | |
| HS7539 | FIXTURE-SEAL INSERTING | 2 | |
| HS7560 | FIXTURE-SLEEVE INSERTING | 1 | |
| HS7592 | CONE SEAT GRINDING FIXTURE | 1 | |
| HS7619 | PITCH LOCK RESET SOLENOID FIXTURE | 1 | |
| HS7623 | ASSEMBLY FIXTURE | 1 | |
| HS7647 | FIXTURE SERVO P | 1 | |
| HS7671 | PITCHLOCK SERVO VALVE TEST FIXTURE | 2 | |
| HS7968 | FIXTURE - TEST, SPD BIAS SERVO | 1 | |
| HS8065 | FIXTURE FILTER ASSEMBLY | 2 | |
| HS8231 | FIXTURE - TEMP. SENSING ASSY TEST | 1 | |
| HS8616 | FIXTURE,HOLDING,SEA | 1 | |
| HS8960 | STOP ASSEMBLY TEST FIXTURE | 2 | |
| HS9597 | FIXTURE ASSEMBL | 1 | |
| HS9925 | Fixture Bellows Setting | 1 | |
| HSP2127 | FIXTURE, ASSEMBL | 1 | |
| HSP2151 | FIXTURE, ASSEMBL | 1 | |
| HSP4446 | FIXTURE BASE REWORK | 1 | |
| HSP4447 | FIXTURE ASSEMBL | 1 | |
| HSP5483 | FIXTURE BASE REWORK | 1 | |
| HT307775 | MAIN ASSEMBLY FIXTURE | 1 | |
| HT307785 | MAIN ASSEMBLY FIXTURE | 1 | |
| HT307788 | MAIN ASSEMBLY FIXTURE | 1 | |
| HTE20244A | SETTING FIXTURE | 1 | |
| HU17656 | ASSEMBLY FIXTURE | 1 | |
| HU20328 | SETTING FIXTURE | 1 | |
| HU27678 | ASSEMBLY FIXTURE | 1 | |
| HU40908 | BLADE ASSEMBLY FIXTURE | 1 | |
| IAE 3P16434 | FLARING FIXTURE (SELF-LOCKING CLINCH NUT IS 0.250-28 THREAD AND IS FLARED TO 30 DEGREES CONICAL ANGLE) | 1 | |
| IAE1J12362 | V2500 Internal Gearbox Fixture (EXT LEG SET ONLY) | 1 | |
| IAE1J12444 | FIXTURE SETTING | 1 | |
| IAE1J12470 | Leak Check Fixture, Inter caseLHT Dwg No.(537220111) | 1 | |
| IAE1J12511 | FIXTURE-SETTING | 8 | |
| IAE1J12514 | FIXTURE-SETTING | 2 | |
| IAE1J12539 | FIXTURE-SETTING | 2 | |
| IAE1J12623 | FIXTURE-SETTING | 1 | |
| IAE1J12812 | MOLDING FIXTURE IGV SEAL | 1 | |
| IAE1J13400 | FIXTURE-COMMON NOZZLE ASSEMBLY | 15 | |
| IAE1M14036 | ASSEMBLY FIXTURE | 1 | |
| IAE1M14036A | FIXTURE ASSEMBLY | 1 | |
| IAE1N20001 | FIXTURE-COMMON NOZZLE ASSEMBLY | 16 | |
| IAE1N20004 | FIXTURE-COMMON NOZZLE ASSEMBLY | 14 | |
| IAE1P16013 | FIXTURE, ASSEMBLY | 1 | |
| IAE1P16026 | FIXTURE, ASSEMBLY | 1 | |
| IAE1P16567 | FLARING FIXTURE (SELF-LOCKING CLINCH NUT IS 0.250-28 THREAD AND IS FLARED TO 30 DEGREES CONICAL ANGLE) | 3 | |
| IAE1P17006 | FIXTURE, REMOVAL, INTERMEDIATE CASE, #3BRG HOUSING | 1 | |
| IAE1P17011 | FIXTURE, DISASSEMBLY | 1 | |
| IAE1P17016 | FIXTURE, SEATING | 1 | |
| IAE2J12617 | FIXTURE - LPC IGV SEAL | 1 | |
| IAE3J12797 | INSERTION FIXTURE | 1 | |
| J21848 | SETTING FIXTURE | 1 | |
| J27070-1 | FIXTURE EQUIPMENT - ASSEMBLY, STABILIZER TRIM ACTUATOR | 4 | |
| J27070-61 | FIXTURE EQUIPMENT - ASSEMBLY, STABILIZER TRIM ACTUATOR | 1 | |
| J32057-1 | FIXTURE EQUIPMENT - LANDING GEAR ACTUATOR ASSEMBLY | 1 | |
| J32057-108 | FIXTURE EQUIPMENT - LANDING GEAR ACTUATOR ASSEMBLY | 3 | |
| J32057-94 | FIXTURE EQUIPMENT - LANDING GEAR ACTUATOR ASSEMBLY | 1 | |
| J32070 | BUILD UP FIXTURE EQPT. SHOCK STRUT NOSE LANDING GEAR | 1 | |
| J32070-59 | BUILD-UP FIXTURE EQUIPMENT - SHOCK STRUT, NOSE LANDING GEAR | 1 | |
| J32070-64 | BUILD-UP FIXTURE EQUIPMENT - SHOCK STRUT, NOSE LANDING GEAR | 2 | |
| J32075-43 | HOLDING FIXTURE ASSEMBLY | 1 | |
| J32080-1 | FIXTURE EQUIPMENT - HYDRAULIC STRUT, ACTUATOR ASSEMBLY, MAIN LANDING GEAR | 1 | |
| J32080-23 | FIXTURE EQUIPMENT - HYDRAULIC STRUT, ACTUATOR ASSE | 1 | |
| J32089-1 | FIXTURE EQUIPMENT - HYDRAULIC STRUT, ACTUATOR ASSEMBLY, MAIN LANDING GEAR | 1 | |
| J32089-124 | FIXTURE EQUIPMENT - HYDRAULIC STRUT, ACTUATOR ASSEMBLY, MAIN LANDING GEAR | 2 | |
| J32091-10 | TEST EQUIPMENT SENSOR FIXTURE | 4 | |
| J32091-11 | Test Eqpt - Sensor Fixture | 3 | |
| J32091-3 | Test Eqpt - Sensor Fixture Kit | 3 | |
| J32091-4 | TEST EQPT. SENSOR FIXTURE FOR B32039 STAND | 1 | |
| J32091-5 | TEST EQPT - SENSOR FIXTURE KIT FOR G32009 STAND (WORKS WITH OPTIONAL J32091-9 MACRO SET) | 1 | |
| J32107-1 | FIXTURE EQUIPMENT - SIDE STRUT ASSEMBLY, MAIN LANDING GEAR | 1 | |
| J32109-1 | FIXTURE EQUIPMENT - DRAG STRUT ASSEMBLY, MAIN LANDING GEAR | 1 | |
| J3400-19 | FIXTURE TEST ANGLE OF ATTACK SENSOR | 1 | |
| J3400-19 OPT A34012-19 | FIXTURE TEST ANGLE OF ATTACK SENSOR | 1 | |
| J34002-18 | FIXTURE - TEST, ANGLE OF ATTACK SENSOR, ROSEMOUNT AOA'S | 5 | |
| J34002-19 | TEST FIXTURE-ANGLE OF ATTACK SENSOR | 20 | |
| J34002-19 | ROSEMOUNT AOA TEST FIXTURE | 20 | |
| J34002-24 | Fixture - Test, Angle of Attack Sensor, ROSEMOUNT AOAs | 1 | |
| J34012-19 | FIXTURE - TEST, ANGLE OF ATTACK SENSOR, ROSEMOUNT AOA'S | 1 | |
| J34012-24 | FIXTURE - TEST, ANGLE OF ATTACK SENSOR, ROSEMOUNT AOA'S | 1 | |
| J71064-1 | FIXTURE - ASSEMBLY, INLET COWL | 1 | |
| J71073-1 | FIXTURE - ASSEMBLY, INLET COWL | 4 | |
| K32033-1 | BUILD-UP FIXTURE EQUIPMENT - SHOCK STRUT, NOSE LANDING GEAR | 4 | |
| K32044-1 | TEST SUPPORT FIXTURE, TIRE PRESSURE SENSOR (TPS) INSTALLATION | 4 | |
| K55006-125 | TORQUE TOOL REACTION FIXTURE EQPT - CLAMP SET | 8 | |
| K55006-73 | FIXTURE PLATE SET | 9 | |
| K55006-74 | TORQUE TOOL REACTION FIXTURE EQPT - CLAMP SET | 5 | |
| K55006-75 | TORQUE TOOL REACTION FIXTURE EQPT - CLAMP SET | 9 | |
| L-38156 | FIXTURE REMOVAL INTERMEDIATE CASE | 1 | |
| L-38870 | FIXTURE REMOVAL INTERMEDIATE CASE | 1 | |
| L-545 | FIXTURE SUPPORT HPC SPLIT STATOR CASE AND AIRSEAL SET BUILD AND TURN | 1 | |
| L-545149 | FIXTURE SUPPORT HPC SPLIT STATOR CASE AND AIRSEAL SET BUILD AND TURN | 1 | |
| LLA1007A052 | SETTING FIXTURE | 1 | |
| LMT | HEAT TREAT FIXTURE, BASE | 1 | |
| LMT 967 | DIFFUSER CASE MEASURING FIXTURE | 1 | |
| LTCT 10440 | TEST FIXTURE ASSEMBLY | 1 | |
| LTCT1064-01 | Fixture Assembly, Holding | 1 | |
| LTCT11049 | FIXTURE,ASSEMBLING | 1 | |
| LTCT11503-01 | Fixture Assembly, First Stage Gas Producer, Disc Assembly Water Flow | 1 | |
| LTCT11519-01 | Fixture Assembly, Second Gas Producer Nozzle Flow | 1 | |
| LTCT11531-01 | Fixture, Flow, First Gas Producer, Segmented Nozzle | 1 | |
| LTCT12051-01 | Fixture, Molding, Fourth Stage Vane Assembly | 1 | |
| LTCT12754-01 | Fixture, Molding - Second Stage Vane Assembly | 1 | |
| LTCT12986-01 | Fixture, Locking, N 1 System Fan Assembly | 1 | |
| LTCT13930-01 | Fixture Assembly, Fan Assembly Torquing | 1 | |
| LTCT13936-01 | Fixture Assembly, Holding | 1 | |
| LTCT13971-01 | Adapter Assembly, Fixture, Flow | 1 | |
| LTCT14163-01 | Fixture Assembly, Third Stage Turbine Disc Riveting | 1 | |
| LTCT14164 | Fixture Assembly, Fourth Stage Riveting | 1 | |
| LTCT14491-01 | Fixture, Carrier Assembly, Shaft Removal/Installation | 1 | |
| LTCT14530 | AGB CASE HOLDING FIXTURE | 1 | |
| LTCT14610-01 | Fixture Assembly, Pressure Test Set | 1 | |
| LTCT14736-02 | Fixture Assembly, Compressor Rotor Checking | 1 | |
| LTCT14757-01 | Fixture Assembly, Pinion Gear Wrench and Torque | 1 | |
| LTCT14757-02 | Fixture Assembly, Pinion Gear Wrench and Torque | 1 | |
| LTCT14794-01 | Fixture, Holding, Air/Oil Separator Gear Wrench | 1 | |
| LTCT1576 | Fixture, Holding, Disc Assembly | 1 | |
| LTCT2072 | STAKING FIXTURE ASSEMBLY | 1 | |
| LTCT30835-01 | Fixture, Pressure, Check Tube Assembly | 1 | |
| LTCT4018 | FIXTURE ASSEMBLY H | 1 | |
| LTCT4440 | Base, Holding Fixture | 1 | |
| LTCT7229-01 | Fixture, Carrier Assembly, Oil Target | 1 | |
| LTCT7468-01 | Fixture Assembly, Fan Blade Indicator | 1 | |
| LTCT7507-01 | Fixture, No. 2 Aft Seal Support | 1 | |
| LTCT7539-01 | Fixture Assembly, Oil Tube Target | 1 | |
| LTCT7632-01 | Fixture, Carrier Assembly, Oil Flow Target | 1 | |
| LTCT859 | Fixture, Test, Valve Assembly | 3 | |
| M.DX7061N2-0 | HOLDING FIXTURE TO HOLD THE MANIFOLD ASSEMBLY DURING ASSEMBLY/ DISASSEMBLY | 1 | |
| M57975A0000-01 | ASSEMBLY FIXTURE | 1 | |
| M58011A0000-01 | ASSEMBLY FIXTURE | 1 | |
| M58255A0000-01 | ASSEMBLY FIXTURE | 1 | |
| M58256A0000-01 | ASSEMBLY FIXTURE | 1 | |
| M58332A0000-01 | ASSEMBLY FIXTURE | 1 | |
| M58371A0000-01 | ASSEMBLY FIXTURE | 1 | |
| M58472A0000-01 | ASSEMBLY FIXTURE | 1 | |
| M58474A0000-01 | ASSEMBLY FIXTURE | 1 | |
| M58570A0000-01 | DISSASSEMBLY FIXTURE | 1 | |
| M65724485 | TOOL, DRILLING FIXTURE ACFT USE | 1 | |
| M65724485PM | TOOL, DRILLING FIXTURE ACFT USE | 1 | |
| MCR500 | RSU BASE MCR-500 CVR Audio Breakout Fixture | 1 | |
| MIT-1544100 | DISASSEMBLY/ASSEMBLY FIXTURE | 1 | |
| MIT-1544470 | ASSEMBLY FIXTURE | 1 | |
| MIT-1704610 | ASSEMBLY FIXTURE | 1 | |
| MIT161U1000-991 | 747, MAIN GEAR SENSOR INSTALL & TEST FIXTURE | 1 | |
| MIT61B51273 | LIFTING FIXTURE - SELL GALLEY | 1 | |
| MIT65B01290-1 | ASSEMBLY FIXTURE - UPLOCK ASSEMBLY, WING LANDING GEAR AND BODY LANDING GEAR | 1 | |
| MIT65B18301 | PIN SET - RUDDER HINGE ALIGNMENT FIXTURE | 1 | |
| MIT65B81000 | ASSEMBLY FIXTURE - RUDDER ACTUATOR REACTION LINKS ASSEMBLY | 1 | |
| MIT65B82429 | SETTING FIXTURE - POSITION TRANSMITTER, STABILIZER | 1 | |
| MIT65B91151 | FIXTURE - DRAIN ASSEMBLY, JT9D ENGINE | 1 | |
| MITK55006-74 | TORQUE TOOL REACTION FIXTURE EQUIPMENT - LAMP SET | 1 | |
| NT204M1 | COPTICAL STROKE SETTING FIXTURE | 1 | |
| NT984 | GEAR SELECTION FIXTURE | 1 | |
| OT900-0239 | Seat Track Setting Fixture | 1 | |
| OT900-0247 | FIXTURE-SEAT TRACKS SETTING | 5 | |
| OT900-052X | AIRCRAFT SEAT TRACK FIXTURE | 1 | |
| OT900-052Y | AIRCRAFT SEAT TRACK FIXTURE | 1 | |
| OT900-0846 | SEAT FIXTURE | 2 | |
| OT900-0927 | CAPT. SEAT TRACK FIXTURE | 2 | |
| OU147264 | SERVO CONTROL HANDLING FIXTURE | 1 | |
| PLZ-00123 | AIR INLET INSPECTION ASSEMBLY FIXTURE | 1 | |
| PME65B01221-1 | SUPPORT FIXTURE - INNER CYLINDER, WING LANDING GEAR, BODY LANDING GEAR AND NOSE LANDING GEAR | 3 | |
| PR 135 | BEARING ASSEMBLING PRESS-IN FIXTURE | 1 | |
| PR135 | BEARING ASSEMBLING PRESS-IN FIXTURE | 1 | |
| PT10128 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT11460 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT11470 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT11478 | Pitot Pre-Test & Assembly Integrity Fixture | 2 | |
| PT11558 | Pitot Pre-Test & Assembly Integrity Fixture | 2 | |
| PT11558M1 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT11685 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT11772 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT11881 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT11881M | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT11882 | Pitot Pre-Test & Assembly Integrity Fixture | 4 | |
| PT12009 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT12148 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT12230 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT12294 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT12607 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT12828 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT12898 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT12993 | Pitot Pre-Test & Assembly Integrity Fixture | 2 | |
| PT13099 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT13304 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT13505 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT13589 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT13690 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT13692 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT13718 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT13805 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT13939 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT14064 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT14095 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT14097 | Pitot Pre-Test & Assembly Integrity Fixture | 2 | |
| PT14114 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT14149 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT14405 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT14412 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT14448 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT14460 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT14460M1 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT14769 | Pitot Pre-Test & Assembly Integrity Fixture | 4 | |
| PT14774 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT14829 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT14895 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT14916 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT14974 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT15228 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT15229 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT15243 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT15243 M1 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT15243M1 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT15275 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT15454 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT15510 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT15551 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT15561 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT15571 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT15582 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT15910 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT16061 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT16158 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT16226 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT16227 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT16286 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT16363 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT16443 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT16445 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT16682 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT16695 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT17325 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT17326 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT17560 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT17570 | Pitot Pre-Test & Assembly Integrity Fixture | 5 | |
| PT17573 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT17670 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT17779 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT17789 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT17790 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT18231 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT18236 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT18514 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT18555 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT18689 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT18712 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT18813 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT18823 | Pitot Pre-Test & Assembly Integrity Fixture | 5 | |
| PT18825 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT18834 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT18834M | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT18836 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT18890 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT18894 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT18902 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT18915 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT19122 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT19269 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT19342 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT19353 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT19625 | Pitot Pre-Test & Assembly Integrity Fixture | 2 | |
| PT19786 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT19823 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT19901 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT19918 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT19932 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT19935 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT19938 | Pitot Pre-Test & Assembly Integrity Fixture | 2 | |
| PT19952 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT19987 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT2000 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT421-0083 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT421-0373 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT421-1415 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT421-202M | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT421-217 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT421-2399 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT421-2915 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT421-2919 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT421-2981 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT421-3549 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT421-418 | Pitot Pre-Test & Assembly Integrity Fixture | 3 | |
| PT421-4368 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT421-4390 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT421-451 | Pitot Pre-Test & Assembly Integrity Fixture | 2 | |
| PT421-4520MD | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT421-453 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT421-458 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT421-4857 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT421-494 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT421-508 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT421-5210MD | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT421-5267 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT421-5400 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT421-5479 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT421-570 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT421-5705 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT421-596 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT421-632 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT421-6585 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT421-698 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT421-703 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT421-706 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT421-709 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT421-7432 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT421-7500 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT421-7634 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT421-7636 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT421-7731 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT421-7743 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT421-8139 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT421-818 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT421-850 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT421-8755 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT421-9262 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT421-9610 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT421-9872 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT44601 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PT757-161 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PTS3133L | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PTS41960 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PTS515 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | |
| PWA 107723 | FIXTURE, SUPPORT – HPT 1ST STAGE AIR SEAL | 1 | |
| PWA 12812 | Fixture Compr.rear bearing seal air pressure tube | 1 | |
| PWA 16197 | FIXTURE NO.6 BEARING SEAL HOUSING | 1 | |
| PWA 21500 | BASE HOLDER FIXTURE | 1 | |
| PWA 25166 | DIFFUSER LIFT FIXTURE | 1 | |
| PWA 25296 | BASE HOLDER FIXTURE | 2 | |
| PWA 28680 | FRONT FAN CASE DRILLING FIXTURE | 1 | |
| PWA 80474 | FIXTURE, DIFFUSER CASE/TURBINE NOZZLE LIFT AND TURN | 1 | |
| PWA 83265 | FIXTURE, ASSEMBLY | 1 | |
| PWA 86119 | FIXTURE, TARGET ASSEMBLY | 1 | |
| PWA104382 | FIXTURE HANDLING - ENGINE ASSEMBLY GEARBOX GROUP | 1 | |
| PWA105742 | FIXTURE-SHIPPING,FAN CASE MODULE,SPLIT SHIP TRANSPORT | 1 | |
| PWA107391 | INDEXING FIXTURE (INLET CONE SEAL) | 1 | |
| PWA111017 | FIXTURE SUPPORT CONE SEGMENT REMOVAL | 3 | |
| PWA111736 | FIXTURE, LIFT - MAIN GEARBOX ASSEMBLY | 1 | |
| PWA116013 | FIXTURE, ALIGNING HPC, SPLIT CASES & VANES | 1 | |
| PWA14370 | HONEYCOMB SEGMENT SLIDE FIXTURE | 1 | |
| PWA211404 | LIFT FIXTURE FAN CASE | 2 | |
| PWA211419 | FIXTURE PIN DIFFUSER H FLANGE BRACKETS | 1 | |
| PWA25039 | FIXTURE, PW4000 EXHAUST/DIFFUSER CASE | 2 | |
| PWA26112 | FIXTURE, LEAK TEST - #1 BRG SEAL ASSY_[PWA26112] | 2 | |
| PWA26113 | FIXTURE - #1 SEAL SUPPORT PRESSURE TEST_[PWA26113] | 1 | |
| PWA26436 | FIXTURE - MOLD, AIRSEALING RING | 2 | |
| PWA27656 | FIXTURE - DIFF CASE #3 BRG NOZ OIL FLOW_[PWA27656] | 1 | |
| PWA27906 | FIXTURE - NO.3 BRG FRT AIRSEAL RETNG NUT_[PWA27906] | 2 | |
| PWA27988 | FIXTURE - SEAL ASSY - NO.3 BRG, FRONT_[PWA27988] | 1 | |
| PWA27989 | FIXTURE, SEAL & HOLDER - #3 BRG REAR_[PWA27989] | 1 | |
| PWA29647 | FIXTURE - SEAL ASSEMBLY, N1 & 2 BEARING_[PWA29647] | 2 | |
| PWA45224 | Lifting Fixture - Engine Assembly Rear | 1 | |
| PWA45265 | Collar (Lifting Fixture, Combustion Chamber Outer Case) | 1 | |
| PWA45941 | FIXTURE, STRESS RELIEVE-REAR TURBINE CASE | 1 | |
| PWA45941 REV NC | FIXTURE, STRESS RELIEVE-REAR TURBINE CASE | 1 | |
| PWA500099 | CASE,FIXTURE | 1 | |
| PWA57617 | FIXTURE SET | 1 | |
| PWA71593 | FIXTURE SET, AIRCRAF | 1 | |
| PWA75913 | FIXTURE - HOLDG NO4 BEARING SEAL SPACER_REPLACESPWA27491BYT.B87-067_[PWA75913] | 1 | |
| PWA80811-8 | FIXTURE, ASSEMBLY-NO.1 BEARING SHOULDER STUDS | 1 | |
| PWA80948 | FIXTURE,DISASSEMBLY | 1 | |
| PWA81924 | FIXTURE, ASSEMBLY | 1 | |
| PWA82038-1 | FIXTURE, ASSEMBLY | 1 | |
| PWA83265 | FIXTURE, ASSEMBLY | 1 | |
| PWA85375 | FIXTURE HANDLING ENG. ASSY HPC 2 BEARING FRONT CASE | 1 | |
| PWA85378 | FIXTURE HANDLING ENG. ASSY HPC 2 BEARING FRONT CASE | 1 | |
| PWA85379 | FIXTURE HANDLING ENG. ASSY HPC 2 BEARING FRONT CASE | 1 | |
| PWA85384 | FIXTURE HANDLING ENG. ASSY.HPC # 2 BEARING FRONT CASE | 1 | |
| PWA85390 | FIXTURE HANDLING ENG. ASSY.HPC # 2 BEARING FRONT CASE | 1 | |
| PWA85391 | FIXTURE HANDLING ENG. ASSY.HPC # 2 BEARING FRONT CASE | 1 | |
| PWA85403 | FIXTURE HANDLING ENG. ASSY.HPC # 2 BEARING FRONT CASE | 1 | |
| PWA85406 | FIXTURE HANDLING ENG. ASSY.HPC # 2 BEARING FRONT CASE | 1 | |
| PWA88601 | FIXTURE INTERMEDIATE CASE | 1 | |
| PWC30057 | BASE. FIXTURE HOLDING | 3 | |
| PWC30420 | HOLDING FIXTURE, COMPRESSOR ROTOR ASSEMBLY | 1 | |
| PWC30525 | ASSEMBLY FIXTURE | 2 | |
| PWC30766 | insertion fixture | 3 | |
| PWC31668 | GRINDING FIXTURE, HP TURBINE SHROUD SEGMENTS | 1 | |
| PWC32216-100 | FIXTURE INSERTION BUSHING | 1 | |
| PWC32216-101 | FIXTURE INSERTION BUSHING | 2 | |
| PWC32216-102 | FIXTURE INSERTION BUSHING | 2 | |
| PWC32216-300 | FIXTURE INSERTION BUSHING | 1 | |
| PWC32266 | insertion fixture | 1 | |
| PWC32316 | Fixture, insertion | 1 | |
| PWC32316-101 | FIXTURE INSERTION BUSHING | 1 | |
| PWC32316-102 | FIXTURE INSERTION BUSHING | 1 | |
| PWC32513 | FIXTURE (USE WITH PWC37327) | 1 | |
| PWC34040 | FIXTURE CARRIER SET | 1 | |
| PWC34060 | FIXTURE, LOCKING INSERT | 5 | |
| PWC37387 | FIXTURE, REAR INLET CASE FLOW | 1 | |
| PWC37911 | FIXTURE, TURBINE SUPPORT CASE CENTERING | 3 | |
| PWC38088 | FIXTURE, LP DIFFUSER ASSEMBLY REMOVAL | 1 | |
| PWC38101 | FIXTURE, HOLDING, LOW PRESSURE VANE RING SEAL MACHINING | 2 | |
| PWC38681 | Fixture, Holding, Second Stage Reduction Idler Gear | 1 | |
| PWC38682 | Fixture, Holding, Second Stage Reduction Idler Gear | 1 | |
| PWC40101 | FIXTURE-SETTING | 1 | |
| PWC40102 | FIXTURE-SETTING | 1 | |
| PWC40220 | ASSEMBLY FIXTURE | 1 | |
| PWC40223 | ASSEMBLY FIXTURE | 1 | |
| PWC40249 | FIXTURE SETTING IGV | 1 | |
| PWC40348 | HOLDING FIXTURE FRONT CASE | 1 | |
| PWC40673 | Setting fixture | 1 | |
| PWC40679 | FIXTURE DISSASSEMBLY | 1 | |
| PWC40683 | FIXTURE ASSEMBLY | 1 | |
| PWC40927 | FIXTURE GRINDING - SHROUD SEGMENTS | 1 | |
| PWC42170 | Fixture CT baffle assembly | 1 | |
| PWC42171 | Fixture Diffuser case | 1 | |
| PWC43017 | LIFTING FIXTURE - FAN ASSEMBLY | 1 | |
| PWC46210 | LIFTING FIXTURE - DIFFUSER CASE | 1 | |
| PWC48028 | ASSEMBLY FIXTURE | 1 | |
| PWC48280 | FIXTURE ASSEMBLY COMBUSTION CHAMBER | 1 | |
| PWC48540 | DRILL FIXTURE, FAN CASE LINER INSERTS | 1 | |
| PWC50699 | FIXTURE LIFTING, POWER SECTION | 3 | |
| PWC50924 | SETTING FIXTURE | 1 | |
| PWC51262 | ASSEMBLY FIXTURE | 1 | |
| PWC51379 | SETTING FIXTURE | 1 | |
| PWC54002-CAISSE | CAISSE POUR LIFTING FIXTURE | 1 | |
| PWC54004 | PLUG FIXTURE ASSEMBLY | 3 | |
| PWC54207 | FIXTURE SERVOVALVE | 1 | |
| PWC56335 | FIXTURE, LP DIFFUSER ASSEMBLY REMOVAL | 1 | |
| PWC56344 | FIXTURE, SECOND STAGE IDLER GEAR HOLDING, STARBOARD | 1 | |
| PWC56663 | LOADING FIXTURE, HP TURBINE SUPPORT CASE | 3 | |
| PWC57827 | PLUG FIXTURE ASSEMBLY | 1 | |
| PWC58761 | GEARBOX ASSEMBLY FIXTURE | 1 | |
| PWC58803 | ENGINE ASSEMBLY FIXTURE | 2 | |
| PWC58840 | ASSEMBLY FIXTURE - GEARBOX | 1 | |
| PWC60449 | LIFTING FIXTURE (FAN BALANCING ASSEMBLY) | 2 | |
| PWC61079 | FIXTURE - SEGMENT | 1 | |
| PWC62294 | FIXTURE-BRUSH SEAL | 1 | |
| PWC62295 | FIXTURE-DISASSEMBLY | 1 | |
| PWC62663 | Fixture- Disassembly | 1 | |
| PWC62865 | Fixture Assy/Disassy Seal | 1 | |
| PWC64865 | DISASSEMBLY FIXTURE | 1 | |
| PWC64866 | ASSEMBLY FIXTURE | 1 | |
| PWC64903 | ASSEMBLY FIXTURE | 1 | |
| PWC65440 | FIXTURE EXHAUST CASE | 1 | |
| PWC65444 | HOLDING FIXTURE, INLET CASE | 1 | |
| PWC65511 | Drilling and assembly Fixture | 1 | |
| PWC67184 | Fixture Brush Seal Front | 1 | |
| PWC71528 | FIXTURE (USE WITH PWC37327) | 3 | |
| PWC71563 | ELECTRICAL BOX ASSEMBLY RIVETING FIXTURE | 1 | |
| PWC71564 | MECHANICAL ASSEMBLY RIVETING FIXTURE | 1 | |
| PWC71776 | HOLDING FIXTURE, COMPRESSOR ROTOR ASSEMBLY | 3 | |
| PWC71850 | REVERSE PROP FIXTURE | 2 | |
| PWC76057 | FIXTURE LINER ASSEMBLY COMBUSTION CHAMBER | 1 | |
| PWC77021 | ROD SETTING FIXTURE | 2 | |
| PWC86170 | SETTING FIXTURE | 1 | |
| PWC86276 | LP SHAFT ASSEMBLY FIXTURE | 1 | |
| PWC86386 | SETTING FIXTURE | 1 | |
| PWC86600 | BASE FIXTURE | 1 | |
| PWC86715 | FAN CASE ASSEMBLY FIXTURE | 1 | |
| PWC89950 | Fixture Data Plate Laser Marker | 1 | |
| Q21801 | ASSEMBLY FIXTURE | 1 | |
| Q21801 PM | ASSEMBLY FIXTURE | 1 | |
| Q21806 | Settling Fixture | 1 | |
| Q21806 PM | SETTLING FIXTURE | 1 | |
| R0050086 | THRUST REVERSER FIXTURE | 1 | |
| R0059484 | THRUST REVERSER FIXTURE | 1 | |
| RB T101508 | HOLDING FIXTURE SET, MAIN TRANSMISSION | 2 | |
| RB T101596 | Holding Fixture, Quill Assembly | 1 | |
| RB T101948 | Fixture Assembly | 2 | |
| RB T102013 | Fixture Assembly, Swashplate Rigging | 1 | |
| RB T102014 | Rigging Cyclic Pitch Stops Fixture Assembly | 1 | |
| RB T102055 | Holding Fixture Assembly | 1 | |
| RB T102069 | Holding Fixture Assembly | 1 | |
| RB T102076 | Quill Assembly Gear Holding Fixture | 3 | |
| RB T102098 | Rigging Cyclic Pitch Stops Fixture Assembly | 1 | |
| RB T102115 | Main Rotor Controls Collective Sleeve & Hub Fixture Assembly | 1 | |
| RB T103056 | Valve Assembly Holding Fixture Set | 1 | |
| RB T103063-3 | Fixture Assembly | 1 | |
| RB T103220-101 | Fixture Case | 3 | |
| RB T103308-101 | Fixture Assembly | 3 | |
| RB0006-809-00682 | Assembly & Disassembly Fixture Gearbox Bev/Pin | 1 | |
| RB23033026 | Nut, Clamp, Compressor Rotor Assembly Fixture | 1 | |
| RB23033036 | Fixture-Separating Compressor Rotor | 1 | |
| RB23034394 | FIXTURE--RETAINING, COMPRESSOR ROTOR BALANCE USED | 1 | |
| RB23055347 | Fixture-Inspection Frt. Compressor Support Assembly | 2 | |
| RB40MCAIRBUS003 | MLG BORING FIXTURE (KINDLY ADVISE MANUFACTURER AND PROVIDE CATALOG) | 1 | |
| RB6795594 | Fixture-Assembly, Compressor Rotor | 2 | |
| RB6795966 | COMPRESSOR DISASEMBLY FIXTURE | 2 | |
| RB6799955 | Fixture-Assembly Turbine | 2 | |
| RB6872162 | Sump Assembly Pressure Test Fixture | 1 | |
| RB6872164 | Turbine Gas Producer Rotor Assembly Adapter Fixture | 2 | |
| RB6872680 | FIXTURE SELECTOR DIFFUSER VENT ORIFICE | 2 | |
| RB6872880 | Compressor Mounting Inserts Checking Fixture | 2 | |
| RB6893360 | Compressor Fixture Assembly | 2 | |
| RB6893376 | Attaching Gas Producer Turbine Assembly Fixture Adapter | 1 | |
| RB6893737 | FIXTURE SELECTOR, REAR COMPRESSOR SEAL VENT ORIFICE | 2 | |
| RBA1003-30101 | Scissors Link Assembly Fixture | 1 | |
| RBA1003-30102-1 | Scissors Link Assembly Fixture | 1 | |
| RBE105-14181W1 | NEEDLE BEARINGS ASSEMBLY FIXTURE | 3 | |
| RBE105-31501W5 | ASSEMBLY/DISASSEMBLY FIXTURE | 2 | |
| RBE1X56-131-407 | Tool, Fixture, Seal Installation | 2 | |
| RBE3160-62-03-901-6501 | Insertion Fixture | 1 | |
| RBH5610-705-40101 | INSPECTION FIXTURE FAN ASSEMBLY TRANS & COUPLING | 2 | |
| RRT027643 | ASSEMBLY FIXTURE | 1 | |
| RRT027686 | ASSEMBLY FIXTURE | 1 | |
| RRT030338 | LASER FIXTURE | 1 | |
| RRT068480 | FIXTURE ASSEMBLY | 1 | |
| RRT075472 | ASSEMBLY FIXTURE | 1 | |
| RRT103050 | ASSEMBLY FIXTURE | 1 | |
| RSE1177 | ROTATING FIXTURE, THRUST REVERSER | 1 | |
| RSE1177 REV A | ROTATING FIXTURE, THRUST REVERSER | 1 | |
| RSE1209 | WELD FIXTURE TURBINE CASE COOLING DUCT LUG | 1 | |
| RSE1209 REV NC | WELD FIXTURE TURBINE CASE COOLING DUCT LUG | 1 | |
| RSE1220 | ASSEMBLY FIXTURE R/R RING ON NOZZLE | 1 | |
| RSE1220 REV C | ASSEMBLY FIXTURE RlR RING ON NOZZLE | 1 | |
| RSE7301 | ENGINE THRUST REVERSER LIFT FIXTURE | 3 | |
| RSE7306 | ROTATION FIXTURE - THRUST REVERSER | 3 | |
| RSE7306 REV C | ROTATION FIXTURE - THRUST REVERSER | 1 | |
| SA30203 | Assembly fixture | 1 | |
| SA30203PM | ASSEMBLY FIXTURE | 1 | |
| SF1-P462A0001 | SETTING FIXTURE | 1 | |
| SF1-P665A0015-00 | SETING FIXTURE FOR P665A0001 | 1 | |
| SK0017-1 | TOOL FIXTURE ASSEMBLY | 1 | |
| SPL-1917 | FIXTURE-TEST,ANGLE OF ATTACK SENSOR | 1 | |
| SPL-8541 | Grinding Fixture Assembly | 1 | |
| SPL-8594 | Fixture Assembly | 1 | |
| SPL-8598 | Fixture Assembly | 1 | |
| SPL-8622 | Fixture Assembly | 1 | |
| ST-71 | ASSEMBLY FIXTURE | 6 | |
| ST-93 | FIXTURE ASSEMBLY COUNTERWEIGHT | 1 | |
| ST69629 | ELEMENT ASSEMBLY FIXTURE | 1 | |
| ST70137 | ASSEMBLY FIXTURE | 1 | |
| ST70233 | ASSEMBLY FIXTURE | 1 | |
| ST70396 | Fixture, Assembly | 1 | |
| ST70433 | Fixture, Oil Filter Cap Assembly | 2 | |
| ST71188 | Assembly Fixture | 1 | |
| ST879AF | Holding Fixture - Hand Presetting Tools, ST879A | 7 | |
| ST879AF-1 | Holding fixture for hand setting tools | 4 | |
| SWE84036 | FIXTURE DOME SEAL REPLACEMENT | 1 | |
| T 27306 | Setting Fixture Metering Valve | 1 | |
| T-0104 | FIXTURE (SEE FIGURE 9001) | 1 | |
| T-21356 | Assembly Fixture | 1 | |
| T-226601 | FIXTURE BASE | 1 | |
| T-232794 | BEARING ASSEMBLY FIXTURE | 1 | |
| T-27210 | ASSEMBLY FIXTURE | 1 | |
| T-27306 | SETTING FIXTURE METERING VALVE | 1 | |
| T-31137 | Assembly Fixture,Primer Impeller | 1 | |
| T-438077 | Test Fixture Selenoid Valve | 1 | |
| T-66639 | Assembly Fixture,Pin Installation | 1 | |
| T-66639PM | ASSEMBLY FIXTURE,PIN INSTALLATION | 1 | |
| T-71044 | Assembly Fixture, Elevator | 1 | |
| T-71593 | Assembly Fixture, Relief Valve | 1 | |
| T09000 | ASSEMBLY CHECK FIXTURE | 1 | |
| T10-00110-01 | GSM 85 SLIP CLUTCH SET FIXTURE | 5 | |
| T101260-101 | FIXTURE ASSEMBLY | 1 | |
| T101447 | HOLDING FIXTURE, TRANSMISSION QUILL ASSEMBLY | 1 | |
| T101508 | HOLDING FIXTURE SET, MAIN TRANSMISSION | 1 | |
| T101572-3 | ALIGNMENT FIXTURE BASE | 1 | |
| T101596 | HOLDING FIXTURE, QUILL ASSEMBLY | 1 | |
| T102069 | HOLDING FIXTURE ASSEMBLY | 1 | |
| T102076 | QUILL ASSEMBLY GEAR HOLDING FIXTURE | 2 | |
| T103063 | TOOL SET, HOLDING FIXTURE, ENGINE ADAPTER | 1 | |
| T103220-101 | FIXTURE CASE | 1 | |
| T103308-10 | FIXTURE ASSEMBLY | 1 | |
| T103308-101 | FIXTURE ASSEMBLY | 1 | |
| T103312-101 | DISASSEMBLY FIXTURE, OUTER SHAFT, FREEWHEEL ASSEMBLY | 1 | |
| T127888 | ASSEMBLY AND TORQUE FIXTURE | 1 | |
| T129227 | ASSEMBLY AND TORQUE FIXTURE | 1 | |
| T129228 | ASSEMBLY AND TORQUE FIXTURE | 1 | |
| T190-428 | Assembly Fixture | 1 | |
| T190-428 PM | ASSEMBLY FIXTURE | 1 | |
| T25716 | FIXTURE, HOLDING, VALVE ASSEMBLY | 1 | |
| T25777 | Fixture-setting | 1 | |
| T25803 | SETTING FIXTURE - THROTTLE LEVER | 1 | |
| T25883 | Assembly Fixture | 1 | |
| T26359 | FUSE VALVE TEST FIXTURE | 1 | |
| T26781 | FIXTURE SETTING | 1 | |
| T27250 | FIXTURE - ASSEMLY | 1 | |
| T27289 | Fixture, Holding Metering Valve Assy Preset | 1 | |
| T27306 | Setting Fixture Metering Valve | 1 | |
| T28003782-FLFX-2 | TORQUE MOTOR CASE FIXTURE | 1 | |
| T3009208 | BEARING PRELOAD SETTING FIXTURE | 1 | |
| T3009541 | BRUSH TENSION SETTING FIXTURE | 1 | |
| T307962 | UNIVERSALINSTRUMENTSERVOTESTFIXTURE | 1 | |
| T3159-010 | LVDT SETTING FIXTURE | 1 | |
| T3159-10 | Setting Fixture | 1 | |
| T321420-901 | ELECTRIC COMPONENTS ASSEMBLY A1TEST FIXTURE | 1 | |
| T321473-901 | ELECTRONIC COMPONENTS ASSEMBLY A2TEST FIXTURE | 1 | |
| T325048 | ADI SENTRI EARTH TEST FIXTURE | 1 | |
| T325118 | ASI SENTRI EARTH TEST FIXTURE | 1 | |
| T327265-9001 | FM CARD SET STACK FIXTURE | 1 | |
| T3779-20 | TEST FIXTURE TO SET EXTENDED LENGHT | 1 | |
| T5-0264K | ASSEMBLY FIXTURE | 1 | |
| T500235-01/-02 | Insert Test Fixture | 1 | |
| T7-032001 | FIXED STRUCUTRE ASSEMBLY DRILL FIXTURE, LH | 1 | |
| T7-032002 | FIXED STRUCUTRE ASSEMBLY DRILL FIXTURE, RH | 1 | |
| T85002 | Assembly Fixture | 1 | |
| T86449 | SETTING FIXTURE | 1 | |
| T8857 | Assembly Fixture | 1 | |
| TAF00462 | WORM GEAR BUSHING ASSEMBLY FIXTURE | 1 | |
| TAF00463 | BALL BEARING ASSEMBLY FIXTURE | 1 | |
| TAF00465 | CLUTCH ASSEMBLY FIXTURE | 1 | |
| TAF00512 | MOTOR PLATE ASSEMBLY FIXTURE | 1 | |
| TAF00550 | BALL BEARING ASSEMBLY FIXTURE | 1 | |
| TAF01316 | Assembly Fixture | 1 | |
| TB3120G001 | Blade Setting Fixture | 1 | |
| TBS004 | PTI HOLDING FIXTURE SERVO ACTUATOR | 1 | |
| TD1604-001 | AMPLIFIER ASSEMBLY FIXTURE | 1 | |
| TD3017-001 | HOLDING FIXTURE FIRST STAGE ASSEMBLY | 1 | |
| TD50332 | AMPLIFIER ASSEMBLY FIXTURE | 1 | |
| TE65-73701 | Fixture Set -Compass Swinging Target | 1 | |
| TE65B81226 | TEST FIXTURE - FEEL UNIT ASSEMBLY, ELEVATOR CONTROL | 1 | |
| TEK-5005F | FIXTURE, 767 PT4 57-50-07, USED W/ TEK-5005 | 1 | |
| TEK-5006/5007 ASY | Transducer Assembly and Manipulating Fixture set, w/ Plunger and Syringe | 1 | |
| TEKIT-5006/5007 | Transducer Assembly & Manipulating Fixture Set, Includes all items per 767 PT4 57-50-05 PG9 FIG4, TEK-5006,TEK-5006-C1,TEK-5006-C2, TEK-5007, TEK-5007-C1, Manipulating Rod, Syringe, Cable, Couplant & 1450 Pelican Case *Does not include NDT694 & NDT695 | 1 | |
| TES-3771 | SHAFT SEAL REMOVING FIXTURE | 1 | |
| TES-3772 | SHAFT SEAL INSTALLING FIXTURE | 1 | |
| TES-3774 | Fixture,Shaft Seal | 1 | |
| TES-3774PM | FIXTURE,SHAFT SEAL | 1 | |
| TES-3775 | Fixture,Bearing Assembly | 1 | |
| TES-3775PM | FIXTURE,BEARING ASSEMBLY | 1 | |
| TF1248-629 | FIXTURE ASSEMBLY - AC LOAD | 1 | |
| TF31840 | CYCLING AND SET-UP FIXTURE | 1 | |
| TF50B27522 | SET OF BACKLASH MEASURING FIXTURES | 1 | |
| TF569-35662 | Test Fixture Manifold Assembly | 1 | |
| TF59197-105 | TEST FIXTURE ASSEMBLY | 1 | |
| TF59197-107 | TEST FIXTURE ASSEMBLY | 1 | |
| TF66-22801 | Test Fixture Manifold Assembly | 1 | |
| TF68061-1009 | TEST FIXTURE - BYPASS VALVE ASSEMBLY | 1 | |
| TFAC30-0028-001 | AUTOBRAKE SELECTOR SWITCH TEST FIXTURE | 1 | |
| TIF00328 | ROTATION BASE FIXTURE | 1 | |
| TIF00352 | ROTATION BASE FIXTURE | 1 | |
| TM1817G001 | DISASSEMBLY FIXTURE | 1 | |
| TMA2361 | GEARSET INTALLATION FIXTURE | 1 | |
| TMY20-28-001 | HOSE FIXTURE | 2 | |
| TSF33T-25001-1 | TEST SUPPORT FIXTURE, DUMMY PNL-FLT ATT SERV PNL | 1 | |
| TSF38T-11001-24 | TEST SUPPORT FIXTURE-PASSENGER WATER AIR GAGE | 1 | |
| TSF38T-11001-25 | TEST SUPPORT FIXTURE, PASSENGER WATER GAGE | 1 | |
| TSF38T-11001-28 | TEST SUPPORT FIXTURE-DRAIN HOSE ASSY-POTABLE WATER SYSTEM | 1 | |
| TSFFT1W2820-2 | SET, TEST SUPPORT FIXTURE, NGS SYSTEM, BAC | 1 | |
| TSJ50-3309-2 | Lever Assembly -Holding Fixture | 1 | |
| TT09925 | SETING FIXTURE FOR P665A0001 | 1 | |
| U0008 | Sealing Fixture Cockpit Sliding Windows | 1 | |
| UTAS-T3779-20 | TEST FIXTURE TO SET EXTENDED LENGH | 1 | |
| V-MO-165 | ASSEMBLY FIXTURE | 1 | |
| V25SH2510 | ASSEMBLY FIXTURE | 1 | |
| VM0-101 | ASSEMBLY FIXTURE | 1 | |
| VM0-111 | ASSEMBLY FIXTURE | 1 | |
| VM0-113 | ASSEMBLY FIXTURE | 1 | |
| VM0-132 | ASSEMBLY FIXTURE FOR MSV | 1 | |
| VM0-165 | ASSEMBLY FIXTURE | 1 | |
| VM0-211 | ASSEMBLY FIXTURE | 1 | |
| VM0-33 | ASSEMBLY FIXTURE | 1 | |
| VM0-34 | ASSEMBLY FIXTURE | 1 | |
| VM0-35 | ASSEMBLY FIXTURE | 1 | |
| VM0-62 | ASSEMBLY FIXTURE | 1 | |
| VM0-69 | ASSEMBLY FIXTURE | 1 | |
| VM0-74 | ASSEMBLY FIXTURE | 1 | |
| VM0-94 | ASSEMBLY FIXTURE | 1 | |
| WT-01962 | FIXTURE, VENT SEALING | 1 | |
| WT-107451 | TEST FIXTURE, SENSOR CALIBRATION | 1 | |
| WT-115698 | ASSEMBLY FIXTURE | 1 | |
| WT-115836 | ASSEMBLY FIXTURE | 1 | |
| WT-65217 | ASSEMBLY, FIXTURE | 1 | |
| X106-1-10 | Assembly Fixture | 1 | |
| X106-1-11 | Assembly Fixture | 1 | |
| X106-1-12 | Assembly Fixture | 1 | |
| Z0107-944 | TEST FIXTURE FOR SEALING TEST | 1 | |
| lC6274 | FIXTURE SET, INSPECTION - LPT STATOR SEAL, STG. 2 | 1 | |
| lC6279 | FIXTURE SET, INSP. LPT STATOR SEAL, STAGE 4 TF39 ENG. | 1 | |
| lC6280 | FIXTURE , INSP. LPT STATOR SEAL, STG. 3 | 1 | |
| lC6282 | FIXTURE, INSP. LPT STATOR SEAL, STG. 6 | 1 | |
| lC628l | FIXTURE, INSP. LPT STATOR SEAL, STG. 5 | 1 | |
| lC6955 | FIXTURE, LIFT-POWER TURBINE ASSEMBLY | 1 | |
| lC6l93 | FIXTURE SET, MACHINING - FRONT COMPRESSOR STATOR | 1 | |
| lC8039 | FIXTURE, RAISE & SUPPORT- UPPER COMPRESSOR CASE | 1 | |
| C067-00-0431 | FLANGE SEALING SURFACE LOCATION FIXTURE | 1 | |
| Р2.4 332А979.001.00 | FIXTURE FOR VISE RE-VERIFICATION | 1 | |
| 98A27208442000 | FIXTURE HINGE ARMS SERVOCONTROLS,USED TO | 3 | |
| 98A27303502000 | MEASURING EQUIPMENT,USE TO CHECK FIXTURE | 2 | |
| 98A27309012000 | HTP FIXTURE,USE TO FIXTURE POSITION THE | 1 | |
| 98A71101024000 | HOLD-OPEN FIXTURE,USED TO ENABLE ENGINE | 1 | |
| 98A71101025000 | HOLD-OPEN FIXTURE,USED TO ENABLE ENGINE | 1 | |
| 98A71101502000 | HOLD-OPEN FIXTURE,USED TO HOLD/OPEN PWA | 8 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
