| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 06-3313 | FIXTURE REMOVE | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 109-3131-02-101 | TR BLADE BUSHING REMOVE/INSTALL FIXTURE - NEW BLADES | 1 | |
| 10C1042G01 | Fixture remove instal accessory gearbox drive shaft | 1 | |
| 10C1058G01 | Fixture,Install And Remove-Bolts,Fwd Shafi | 1 | |
| 10C1063G03 | FIXTURE, INSTALL/REMOVE - LPT NOZZLE | 1 | |
| 10C1063G04 | Fixture,install/remove-lpt nozzle | 1 | |
| 10C1089G01 | Fixture,strat/remove hp turb rotor nuts | 1 | |
| 10C1107G01 | FIXTURE, INSTALL/REMOVE - LPT MODULE (INSTALL/REMOVE FIXTURE) | 1 | |
| 10C1107G02 | Fixture, Install/ Remove - Lpt Module | 1 | |
| 10C1108G02 | FIXTURE, REMOVE - SPACER STG 1 FAN BLADE, MECHANIC | 4 | |
| 10C1113 | FIXTURE - REMOVE-SPACER STG 1 F | 1 | |
| 10C1113G01 | Fixture，remove-spacer STG 1 fan blade，hydraulic | 2 | |
| 10C1120 | FIXTURE - INSTALL / REMOVE | 1 | |
| 10C1120G01 | FIXTURE, INSTALL/REMOVE - NO. 5 BEARING RETAINING NUT (INSTALL/REMOVE FIXTURE) (SUPERSEDED BY 10C1120G02) | 1 | |
| 10C1120G02 | FIXTURE, INSTALL/REMOVE - NO. 5 BEARING RETAINING NUT (INSTALL/REMOVE FIXTURE) (SUPERSEDES 10C1120G01) | 1 | |
| 10C1173G01 | Fixture,install/remove- no 5 bearing retaining nut | 1 | |
| 10C1222G01 | FIXTURE, INSTALL/REMOVE - AIR/OIL SEPARATOR NUT | 1 | |
| 10C1222G02 | Fixture, Install/Remove Air/Oil Separator Nut | 1 | |
| 10C1272G02 | Fixture, Vibrate - Compressor Rotor Blades, Remove and Install | 1 | |
| 10C2086G02 | Fixture,inst/remove-cvt support assembly | 1 | |
| 10C2141 | INST/REMOVE FIXTURE | 1 | |
| 10C2214G01 | Fixture-remove BRG pto | 1 | |
| 10C2217G01 | Fixture-remove BRG pto | 1 | |
| 10C2222G01 | Fixture-Remove Brg Rds | 1 | |
| 1106569-2 | Pressure Seal Remover Fixture | 1 | |
| 11C3002 | FIXTURE - INSTALL/REMOVE-HPTR FOS | 1 | |
| 11C3006 | FIXTURE - INSTALL/REMOVE-HP TURB RTR INNER STG SEAL | 1 | |
| 11C3017 | FIXTURE - INSTALL/REMOVE-STG 2 AFT BLADE RETAINER | 1 | |
| 11C3017G02 | Fixture,install/remove-stg 2 aft blade retainer | 1 | |
| 11C3022 | FIXTURE - INSTALL/REMOVE-DISK - HPT ROTOR - STAGE 2 | 1 | |
| 11C3022G01 | Fixture Install/Remove-Disk,Hpt Rotor Stg 2 | 1 | |
| 11C3033 | FIXTURE - INSTALL/REMOVE-COUPLING NUT - HPT RTR STG 2 | 1 | |
| 11C3033G03 | Fixture，install/remove-coupling nut，HPT PTR STG 2 | 1 | |
| 11C3050 | FIXTURE - ASSY-VERTICAL - REMOVE/INSTALL - COMBUSTOR | 1 | |
| 11C3050G01 | Fixture,assy-vertical,remove/install,combustor | 1 | |
| 11C3068 | FIXTURE - INSTALL/REMOVE-SHANK NUT - HPTR STG 2 | 1 | |
| 11C3166G04 | Fixture install remove seal rotating no 1 bearing | 1 | |
| 11C3262 | FIXTURE - INSTALL / REMOVE AGB MODUL | 1 | |
| 11C3267 | FIXTURE, INSTALL/REMOVE-HEAT SHIELD, HP TURB ROTOR | 1 | |
| 11C3339 | FIXTURE - REMOVE-HANGER AFT RETAINER - STG 2-HPT | 1 | |
| 11C3339G01 | Fixture，remove-hanger AFT retainer，STG 2-HPT | 1 | |
| 11C3347G02 | FIXTURE, INSTALL/REMOVE - HPC ROTOR TUBE CARRIER | 1 | |
| 11C3354 | FIXTURE - INSTALL/REMOVE - HPT INTERSTAGE SEAL | 1 | |
| 11C3421 | FIXTURE - INSTALL/REMOVE - FAN SHAFT COVER | 1 | |
| 11C3421G03 | Fixture install/remove fan shaft cover | 1 | |
| 11C4248G01 | HORIZONTAL DRIVE SHAFT REMOVE/INSTALL FIXTURE | 1 | |
| 11C4271 | FIXTURE - INSTALL/REMOVE - SHAFT MID FAN | 1 | |
| 11C441 | FIXTURE INSTALL/REMOVE LRU | 1 | |
| 11C4412 | FIXTURE, INSTALL/REMOVE - LRU | 1 | |
| 11C4412G02 | FIXTURE, INSTALL/REMOVE - LINE REPLACEMENT | 1 | |
| 11C4412G04 | FIXTURE, INSTALL/REMOVE - LINE REPLACEABLE UNITS | 2 | |
| 11C4413 | FIXTURE, INSTALL/REMOVE - TRIM | 1 | |
| 11C4413G05 | FIXTURE, INSTALL/REMOVE - TRIM BALANCE CLIP - STAGE 7 LPT BLADE | 1 | |
| 11C4472 | FIXTURE - INSTALL/REMOVE-COOLER OIL-AIR COOLED | 1 | |
| 11C4472G01 | SPL-11575 - FIXTURE - REMOVE/INSTALL, AIR COOLED OIL COOLER | 1 | |
| 11C4472G02 | SPL-11575 - FIXTURE - REMOVE/INSTALL, AIR COOLED OIL COOLER | 1 | |
| 11C4517 | FIXTURE - REMOVE - HEAT SHIELD HP TURB ROTOR | 1 | |
| 11C4517G02 | Fixture,remove-heat shield hp turb rotor | 1 | |
| 11C4538 | FIXTURE - INSTALL/REMOVE - EEC | 1 | |
| 11C4605G01 | Fixture,install/remove-coupling nut,hpt rotor | 1 | |
| 11C4609 | FIXTURE - INSTALL/REMOVE -TRIM BALANCE CLIP - STAGE 6 LPT BLADE | 1 | |
| 11C4609G04 | FIXTURE, INSTALL/REMOVE - TRIM BALANCE CLIP - STAGE 7 LPT BLADE | 1 | |
| 11C4641 | FIXTURE - INSTALL/REMOVE - FUEL SPLIT VALVE | 1 | |
| 11C4641G01 | FIXTURE - INSTALL/REMOVE - FUEL SPLIT VALVE | 2 | |
| 11C4649G01 | FIXTURE, INSTALL/REMOVE - EEC | 1 | |
| 11C4650 | FIXTURE - REMOVE - HPT BLADE RET - STG 1 | 1 | |
| 11C4654G01 | Fixture,remove-lpt nut retaining ring,fwd | 1 | |
| 11C4665 | FIXTURE - INSTALL/REMOVE-ACCESSORY GEARBOX MODULE | 1 | |
| 11C4665G01 | Fixture,install/remove-accessory gearbox module | 1 | |
| 11C4687 | FIXTURE, REMOVE - CDP SEAL AND STAGE 6-10 SP JOINT | 1 | |
| 11C4687G01 | FIXTURE, REMOVE - CDP SEAL AND STAGE 6-10 SP JOINT | 1 | |
| 11C4693 | INSTALL/REMOVE FIXTURE | 1 | |
| 11C4693G01 | INSTALL/REMOVE FIXTURE - MFOHX | 1 | |
| 11C5015G01 | Fixture-install/remove,hp compr rtr tube carrier | 1 | |
| 18C1006 | FIXTURE, REMOVE - STG 1 & | 1 | |
| 18C1013 | FIXTURE, REMOVE - HPT AFT SEAL | 1 | |
| 18C1019 | FIXTURE, REMOVE - NO. 4 BRG. & SEALS | 1 | |
| 18C1019G01 | Fixture, Remove-Seal Rotating Aft N0 4Roller Brg & Aft Seal, Hpt | 1 | |
| 18C1034 | FIXTURE, INSTALL/REMOVE - | 1 | |
| 18C1040G01 | Fixture,install/remove-no.4 brg outer race | 1 | |
| 18C1041G01 | Fixture, Removeno 4 & 5 Carbon Seal | 1 | |
| 18C1043G01 | Fixture,install/remove-hpt intershaft seal arm | 1 | |
| 18C1062 | FIXTURE, REMOVE - M10 SEAL | 1 | |
| 18C1066G01 | Fixture,remove-lpt nozzle stg -1 | 1 | |
| 18C1068G02 | Fixture,remove-spoolie,b-sump | 1 | |
| 18C1080G01 | Fixture,lift-hptr install/remove | 1 | |
| 18C1182G01 | Fixture, Remove - Hpt Rotor, Rear Shaft | 1 | |
| 18C1346G01 | Fixture Install/Remove Fan Blisk | 1 | |
| 18C1416 | FIXTURE, INSTALL/REMOVE FWD./AFT SHAFT COVER | 1 | |
| 18C1610 | FIXTURE, INSTALL/REMOVE-LINE REPLACEABLE UNITS | 1 | |
| 18C1633 | FIXTURE, REMOVE/INSTALL - LOWER FFD PANEL | 1 | |
| 19C0523G01 | Fixture Remove-Hpt Rotor Stage 1 Blade Retainer | 1 | |
| 1C6103 | FIXTURE, BLADE INSTALL/REMOVE - PT ROTOR | 1 | |
| 1C6902 | FIXTURE, REMOVE/INSTALL - COMP | 1 | |
| 1C6902G01 | FIXTURE, REMOVE/INSTALL - COMP | 1 | |
| 1C6978 | FIXTURE, INSTALL/REMOVE - PT HORIZONTAL | 1 | |
| 1C8134 | FIXTURE, INSTALL & REMOVE COMPR ROTOR HUB TIE | 1 | |
| 1C8134G01 | FIXTURE, INSTALL & REMOVE COMPR ROTOR HUB TIE | 1 | |
| 1C8305 | FIXTURE, INSTALL/REMOVE-POWER TURBINE, AFT SHAFT S | 1 | |
| 1C9318G01 | FIXTURE, INSTALL/REMOVE - RETAINER RING LPT/MID SHAFT | 1 | |
| 1C9319G01 | FIXTURE, INSTALL/REMOVE - NO. 6 BEARING PLUG | 1 | |
| 1C9336G01 | Fixture assembly,install/remove-aft drive shaft nut | 1 | |
| 1C9422 | FIXTURE - INSTALL/REMOVE CRF AFT CASE | 1 | |
| 1C9422G01 | FIXTURE, INSTALL/REMOVE-CRF AFT CAS | 1 | |
| 1C9608 | FIXTURE, INSTALL/REMOVE - HP TURB MODULE ASSEMBLY | 1 | |
| 1C9608G01 | Fixture, Install-Remove - HP Turbine Module | 1 | |
| 1C9608G02 | FIXTURE, INSTALL/REMOVE - HP TURBINE MODULE | 1 | |
| 1C9608P11 | Fixture,Install/Remove-Hp Turb ,Module Assembly | 1 | |
| 1C9618G01 | Fixture, Install/Remove - Retainer Ring LPT/Mid-Shaft | 1 | |
| 1F10152 | Fixture, Remove/Install | 1 | |
| 2025261-1 | BEARING REMOVAL FIXTURE (REMOVES 3617585-001 COMPRESSOR BEARING FROM 3810127-1 BEARING HOUSING ASSEMBLY AND 3822055-1 COUPLING SHAFT) | 1 | |
| 23068599 | Fixture – Remove & Replace Compressor Cone Shaft Studs | 1 | |
| 247C5020 | FIXTURE, INSTALL/REMOVE-MID SHAFT ASSEMBLY | 1 | |
| 247C5253 | FIXTURE - INSTALL/REMOVE | 1 | |
| 247C5253G01 | FIXTURE - INSTALL/REMOVE | 1 | |
| 247C5361 | FIXTURE, INSTALL/REMOVE MID SHAFT ASSEMBLY | 1 | |
| 294882-1 | TURBINE MODULE HANDLING FIXTURE (TO INSTALL OR REMOVE 3801004-2 POWER SECTION FROM ENGINE ASSEMBLY) | 1 | |
| 2C14084G01 | FIXTURE, INSTALL/REMOVE/RAISE/ LOWER MODULE | 3 | |
| 2C14107 | FIXTURE, REMOVE/INSTALL ACCESS GEARBOX DRIVE SHAFT | 1 | |
| 2C14107 REV D | FIXTURE, REMOVE/INSTALL ACCESS. GEARBOX DRIVE SHAFT | 1 | |
| 2C14107G01 | FIXTURE, REMOVE/INSTALL - ACCESSORY GEARBOX DRIVE SHAFT (FIXTURE) | 13 | |
| 2C14113G01 | FIXTURE, INSTALL AND REMOVE-COMP.ROTOR FWD. SHAFT SPLINE ADAPTER | 3 | |
| 2C14138G01 | FIXTURE, REMOVE AGB MATING RIG | 11 | |
| 2C14138G02 | FIXTURE, REMOVE AGB MATING RING | 14 | |
| 2C14199 | FIXTURE, INSTALL REMOVE-HP TURB MOD. ASSY | 1 | |
| 2C14199 REV V | FIXTURE, INSTALL REMOVE-HP TURB MOD. ASSY | 1 | |
| 2C14199G03 | FIXTURE, INSTALL/REMOVE HPT MODULE ASSEMBLY | 1 | |
| 2C14199G06 | FIXTURE, INSTALL/REMOVE - HP TURB MODULE ASSEMBLY | 1 | |
| 2C14199G07 | FIXTURE INSTALLREMOVE HPT | 4 | |
| 2C14199G08 | FIXTURE, INSTALL/REMOVE HPT MODULE ASSEMBLY | 1 | |
| 2C14199G09 | FIXTURE, INSTALL/REMOVE - HPT MODULE (USE FOR PB) | 1 | |
| 2C14199G10 | FIXTURE, INSTALL/REMOVE - HPT MODULE ASSEMBLY | 1 | |
| 2C14636G01 | FIXTURE, RESTRAINING ‐ LPT, AFT (TRF REMOVED) | 1 | |
| 2C14644 | FIXTURE, INSTALL/REMOVE ACCESS. GEARBOX MODULE | 1 | |
| 2C14644 REV K | FIXTURE, INSTALL/REMOVE ACCESS. GEARBOX MODULE | 1 | |
| 2C14644G02 | FIXTURE, REMOVE/INSTALL ‐ MODULE | 1 | |
| 2C14661G01 | FIXTURE, INSTALLREMOVE COMP REAR FRAME ASSY | 2 | |
| 2C14691 | FIXTURE, INSTALL/REMOVE COMBUSTER | 1 | |
| 2C14691 REV C | FIXTURE, INSTALL/REMOVE COMBUSTER | 1 | |
| 2C14691G01 | FIXTURE, INSTALLREMOVE COMBUSTOR | 2 | |
| 2C14712G01 | POSITION FIXTURE T/GBOX REMOVE | 8 | |
| 2C14718G02 | Fixture,install& remove-air tube hp turb stg 2 nozzle | 2 | |
| 2C14773 | FIXTURE, INSTALL/REMOVE - STG 1 FAN DISK NUTS | 1 | |
| 2C14773G03 | FIXTURE, INSTALL/REMOVE | 1 | |
| 2C14784 | FIXTURE, REMOVE-HPT ROTOR AFT OUTER AIR SEAL | 1 | |
| 2C14784G01 | FIXTURE, REMOVE - HPT ROTOR AFT OUTER AIR SEAL | 1 | |
| 2C14785 | FIXTURE - REMOVE | 1 | |
| 2C14797 | FIXTURE, INSTALL-REMOVE-MAIN ENGINE FUEL CONTROL | 1 | |
| 2C14797 REV B | FIXTURE, INSTALL/REMOVE -MAIN ENG. FUEL CONTROL | 1 | |
| 2C14797G01 | FIXTURE INSTALL/REMOVE MAIN ENGINE | 2 | |
| 2C14809G01 | FIXTURE, REMOVE STAG | 1 | |
| 2C14824 | FIXTURE,INSTALL REMOVE-THRML SHLD HP TURB ROTOR DISK | 1 | |
| 2C14824G04 | Fixture, install remove - thrml shld hp turb rotor disk | 1 | |
| 2C14836 | FIXTURE, INSTALL/REMOVE | 1 | |
| 2C14836G01 | FIXTURE, INSTALL/REMOVE - STAGE 2 AFT BLADE RETAINER (INSTALL/REMOVE FIXTURE) | 1 | |
| 2C14836G02 | FIXTURE, INSTALL/REMOVE - STAGE 2 AFT BLADE RETAINER (INSTALL/REMOVE FIXTURE) | 1 | |
| 2C14846 | FIXTURE,INTALLREMOVE-CENTER VENT TUBE | 1 | |
| 2C14852 | FIXTURE INSTALL-REMOVE-MAIN ENG FUEL CONTROL | 1 | |
| 2C14871G01 | FIXTURE, INSTALL \ REMOVE-MANIFOLD NO 1 BEARING | 6 | |
| 2C14871G02 | FIXTURE,INSTALL/REMOVE-MANIFOLD N°1 BEARING | 3 | |
| 2C15031G01 | FIXTURE, INTALL/REMOVE - SHANK NUTS, | 1 | |
| 2C18049G01 | FIXTURE, INSTALL/REMOVE, SPACER & CENTER VENT TUBE (FIXTURE) | 1 | |
| 2C18062G01 | FIXTURE,INTALLREMOVE-LPT MODFAN FWD SFT | 1 | |
| 2C18062G02 | FIXTURE,P20,P21,P22 INTALL REMOVE LPT | 1 | |
| 2C6122 | FIXTURE, INSTALL & REMOVE - BOLTS, FWD SHAFT | 1 | |
| 2C6122G02 | FIXTURE, INSTALL/REMOVE, BOLTS ‐ FORWARD FAN SHAFT | 1 | |
| 2C6122G03 | FIXTURE REMOVEL/INSTALL BOLTS FWD FAN SHAFT | 1 | |
| 2C6269 | FIXTURE INSTALL REMOVE-SPACER STAGE 1 FAN BLADE | 1 | |
| 2C6588 | FIXTURE,INSTALL/REMOVE-C/R FOR | 1 | |
| 2C6588G01 | FIXTURE,INSTALL/REMOVE-C/R FOR | 1 | |
| 2C8008 | FIXTURE, REMOVE - | 1 | |
| 2C8008G01 | Fixture, Remove - Fan Stator Fairing | 4 | |
| 2C81330G01 | Fixture, Install / Remove No 3 Bearing Outer Race | 1 | |
| 2C81445G01 | FIXTURE, INSTALL/REMOVE | 1 | |
| 2C81452 | FIXTURE, INSTALL/REMOVE | 1 | |
| 2C81452G02 | FIXTURE, INSTALL/REMOVE STAGE 1 | 1 | |
| 2C81456G01 | FIXTURE, INSTALL/REMOVE SPACER | 1 | |
| 2C81465G01 | Fixture, Install/Remove- Stg 1, Fwd Cooling Plate | 1 | |
| 2C81575G02 | Fixture，blade retainer remove | 1 | |
| 2C81608 | FIXTURE, INSTALL/REMOVE AGB - | 1 | |
| 2C81608G01 | FIXTURE, INSTALL/REMOVE AGB - | 1 | |
| 2C81969 | FIXTURE, INSTALL/REMOVE, STG 4 AIR CONDUITS | 1 | |
| 2C81969G01 | FIXTURE, INSTALL/REMOVE, STG 4 AIR CONDUITS | 1 | |
| 3402244-1 | FIXTURE ASSY., FLIGHT STATION AIR CONDITIONING UNIT, INSTL/REMOVE | 1 | |
| 7C2006G03 | Fixture,install/remove-hp turb inner stg seal | 1 | |
| 7C2071G02 | Fixture,install/remove-shank nut,disk,hpt rotor | 1 | |
| 7C2177G01 | Fixture,install/remove-no 4 brg fwd spacer | 1 | |
| 7C2247 | FIXTURE, INSTALL/REMOVE A SUMP FWD SPANNER NUT | 1 | |
| 833461-1 | LIFT FIXTURE (TO REMOVE ENGINE FROM SHIPPING CRATE) | 1 | |
| 835093-1 | Wheel Remove Fixture | 1 | |
| 856A1120 | FIXTURE, INSTALL AND REMOVE - IGB MODULE | 1 | |
| 856A1120G02 | FIXTURE INSTALL & REMOVE IGB | 1 | |
| 856A1120G05 | FIXTURE INSTALL AND REMOVE IGB MODULE | 2 | |
| 856A1204 | FIXTURE, REMOVE | 1 | |
| 856A1204G01 | FIXTURE, REMOVE | 10 | |
| 856A1281G02 | LIFT FIXTURE (IT'S POSSIBLE TO REMOVE SEAL FROM DISK BY HAND) | 5 | |
| 856A1290G01 | FIXTURE, INSTALL AND REMOVE | 7 | |
| 856A1291 | Fixture, Instal/ Remove Inlet GB module | 1 | |
| 856A1291 G05 | FIXTURE, INSTALL & REMOVE - INLET GEARBOX MODULE | 1 | |
| 856A1291 G06 | Fixture Install and Remove ‐ Inlet Gearbox | 3 | |
| 856A1291G01 | FIXTURE, INSTALL & REMOVE - INLET GEAR - BOX MODULE | 1 | |
| 856A1291G02 | FIXTURE, INSTALL & REMOVE - INLET GEAR - BOX MODULE | 1 | |
| 856A1291G03 | FIXTURE, INSTALL & REMOVE - INLET GEAR - BOX MODULE | 1 | |
| 856A1291G04 | FIXTURE, INSTALL & REMOVE - INLET GEAR - BOX MODULE | 1 | |
| 856A1291G05 | FIXTURE, INSTALL & REMOVE - INLET GEARBOX MODULE | 1 | |
| 856A1291G06 | FIXTURE INSTALL AND REMOVE-I | 3 | |
| 856A1291G07 | FIXTURE, INSTALL & REMOVE - INLET GEAR - BOX MODULE | 1 | |
| 856A1291G08 | FIXTURE, INSTALL AND REMOVE-INLET GEARBOX MODULE | 8 | |
| 856A1291G09 | FIXTURE, INSTALL AND REMOVE - INLET GEARBOX MODULE (INSTALL AND REMOVE FIXTURE) | 4 | |
| 856A1291G10 | FIXTURE, INSTALL & REMOVE - INLET GEAR - BOX MODULE | 7 | |
| 856A1291G35 | FIXTURE, INSTALL AND REMOVE - INLET GEARBOX MODULE | 1 | |
| 856A1291P35 | FIXTURE, INSTALL AND REMOVE - INLET GEARBOX MODULE | 4 | |
| 856A1358 | FIXTURE, REMOVE/INSTALL PART | 2 | |
| 856A1358 G01 | Fixture Install/Remove ‐ Module 12 | 1 | |
| 856A1358G01 | Fixture, Install / Remove | 1 | |
| 856A1358G02 | FIXTURE, INSTALL/REMOVE - MODULE 12 | 8 | |
| 856A1374 | FIXTURE, INSTALL/REMOVE - AIR SEAL IGB (FIXTURE) | 1 | |
| 856A1374G02 | FIXTURE, INSTALL/REMOVE - AIR SEAL IGB (FIXTURE) | 2 | |
| 856A1387G01 | FIXTURE, INSTALL/REMOVE | 3 | |
| 856A1490 | FIXTURE, INSTALL/REMOVE MODULE 10 | 1 | |
| 856A1490G01 | FIXTURE INSTALL/REMOVE MODULE 12 | 1 | |
| 856A1490G02 | FIXTURE INSTALL/REMOVE MODULE 11 | 1 | |
| 856A1490G03 | FIXTURE INSTALL/REMOVE MODULE 10 | 1 | |
| 856A1490G04 | FIXTURE INSTALL/REMOVE MODULE 9 | 3 | |
| 856A1490G05 | FIXTURE, INSTALL/REMOVE MOD 12 FOR - | 6 | |
| 856A1501001 | FIXTURE. INSTALL AND REMOVE- IGB RETAINER PINS | 1 | |
| 856A1501G01 | Fixture, Install and Remove - IGB Retainer Pins | 4 | |
| 856A1503G01 | FIXTURE, INSTALL/REMOVE | 1 | |
| 856A1603 | FIXTURE INSTALL/REMOVE HPTR FW | 1 | |
| 856A1603G03 | FIXTURE, INSTALL/REMOVE - HPT ROTOR FWD OUTER SEAL | 3 | |
| 856A1603G05 | FIXTURE. INSTALLFREMOVE - HPTR FORWARD OUTER SEAL (INSTALL/REMOVAL FIXTURE) (SB 72-0643) | 2 | |
| 856A1603G07 | FIXTURE, INSTALL/REMOVE - HPT ROTOR FWD OUTER SEAL | 2 | |
| 856A1603G08 | FIXTURE INSTALL/REMOVE - HPT ROTOR FWD OUTER SEAL | 3 | |
| 856A1604G01 | Fixture Splined Bolt Remove | 1 | |
| 856A1604G02 | Fixture Spuned Bolt Remove | 10 | |
| 856A1619G01 | FIXTURE, LIFT-FIXT, INSTALL/REMOVE | 6 | |
| 856A1621G01 | Fixture, Lift - Fixture Install/Remove, HP Turbine Rotor Forward Outer Seal (lift fixture) | 3 | |
| 856A1826G01 | Fixture, Install/Remove - No. 3 Stationary Air Seal (fixture) | 3 | |
| 856A1868 | FIXTURE - INSTALL/REMOVE | 1 | |
| 856A1868G01 | Fixture Install/Remove - HPTR Forward Outer Seal | 4 | |
| 856A1868G02 | FIXTURE, INSTALL/REMOVE-HP TURB ROTOR FWD OUTER SEAL | 1 | |
| 856A1868G03 | FIXTURE, INSTALL/ REMOVE-HP TURB | 3 | |
| 856A2010G01 | Fixture Remove HPTR | 2 | |
| 856A2308G02 | FIXTURE, INSTALL/REMOVE | 9 | |
| 856A2379G01 | FIXTURE, INSTALL/REMOVE | 7 | |
| 856A2618G04 | FIXTURE, INSTALL AND REMOVE - INLET GEARBOX MODULE | 11 | |
| 856A2655 | FIXTURE, INSTALL/REMOVE RADIAL DRIVE SHAFT HSGS. | 1 | |
| 856A2655 G01 | Fixture Install/Remove ‐ Radial Drive Shaft Housing | 1 | |
| 856A2655 REV A | FIXTURE, INSTALL/REMOVE RADIAL DRIVE SHAFT HSGS. | 1 | |
| 856A2655G01 | FIXTURE INSTALL/REMOVE | 1 | |
| 856A2655G02 | FIXTURE, INSTALL/REMOVE - RADIAL DRIVE SHAFT HOUSINGS (FIXTURE) | 1 | |
| 856A2655G03 | Fixture, Install/Remove - Radial Drive Shaft Housings (fixture) | 5 | |
| 856A2677G01 | FIXTURE, RETAINING RING REMOVE | 21 | |
| 856A2694G01 | FIXTURE, INSTALLFREMOVE - RADIAL DRIVE SHAFT HOUSINGS (FIXTURE) | 4 | |
| 856A2719 | FIXTURE, SUPPORT - REMOVE/INSTALL TGB (SUPPORT FIXTURE) | 4 | |
| 856A2719G01 | FIXTURE, SUPPORT - REMOVE/INSTALL TGB (SUPPORT FIXTURE) | 2 | |
| 856A2719G02 | FIXTURE, SUPPORT - REMOVE/INSTALL TGB (SUPPORT FIXTURE) | 7 | |
| 856A2719G03 | FIXTURE, SUPPORT - REMOVEJ INSTALLTGB (SUPPORT FIXTURE) | 12 | |
| 856A3752G02 | Fixture, Remove Stage 1-2-3 Outer Stat Air Seal | 1 | |
| 8C2011G02 | Fixture,install/remove-hpt rotor,fwd seal | 1 | |
| 8C2011G04 | Fixture,install/remove-hpt rotor,fwd seal | 1 | |
| 8C2018 | FIXTURE, INSTALL/ REMOVE STG 2 AFT BLADE RETAINER | 1 | |
| 8C2018G02 | Fixture,Install /Remove-Stg 2 Aft Blade Retainer/Stg2 Hptr Sub-Assembly | 1 | |
| 8C2026G01 | Fixture,remove-disk,hpt rotor stage 2 | 1 | |
| 8C2026G02 | Fixture,remove-disk,hpt rotor stage 2 | 1 | |
| 8C2028G02 | Fixture, Remove- Hptr Interstage Seal | 1 | |
| 8C2044G01 | fixture remove no 4 carbon seal runner | 1 | |
| 8C2050G02 | Fixture,remove -stg 1 blade retainer,hptr | 1 | |
| 8C2083G01 | Fixture，install/remove aspirating seal，M10 | 1 | |
| 8C2092 | FIXTURE, REMOVE - AFT HEAT SHIELD, HPTR | 1 | |
| 8C2092G01 | Fixture Install/Remove-Aft Heat Shield Hptr | 1 | |
| 8C2195 | FIXTURE - REMOVE - HPC ROTOR AFT GRIND / BALANCE ARBOR (PRODUCTION) | 1 | |
| 8C2198 | FIXTURE, INSTALL/REMOVE - HPCS BUSHINGS | 1 | |
| 8C2433G01 | Fixture,remove-fwd& aft nut retaining ring | 1 | |
| 8C2455G02 | FIXTURE, INSTALL/REMOVE – TRIM BALANCE CLIP – STAG | 1 | |
| 8C2459 | FIXTURE, INSTALL/REMOVE-SHAFT COVER, FWD | 1 | |
| 8C2465G01 | Fixture Install/Remove-Bearing Race | 1 | |
| 8C2509G02 | Fixture, Remove - Seal Rotating, No 1 Brg | 1 | |
| 8C2520 | FIXTURE, REMOVE - KEYED RING, FAN SHAFT | 1 | |
| 8C2527 | FIXTURE, REMOVE – INTERSHAFT SEAL | 1 | |
| 8C2527G01 | Fixture Remove-Intershaft Seal | 1 | |
| 8C2555 | FIXTURE, REMOVE - EXTENSION SHAFT, NO 2 BRG | 1 | |
| 8C2555G02 | Fixture,remove-extension shaft No.2 brg | 1 | |
| 8C2580 | INSTALL/REMOVE ACCESSORY MODULE FIXTURE | 1 | |
| 8C2583 | FIXTURE, BUILD & INSTALL/REMOVE - ACCESSORY GEARBOX | 1 | |
| 8C2615 | FIXTURE, INSTALL/REMOVE-FAN BLADE | 1 | |
| 8C2615G01 | Fixture,install/remove-fan blade | 1 | |
| 8C2615G02 | Fixture,install/remove-fan blade | 1 | |
| 8C2666 | FIXTURE, INSTALL/REMOVE-LINE REPLACEABLE UNITS | 1 | |
| 8C2666G03 | Fixture,install/remove-line replaceable units | 1 | |
| 8C2692G01 | Fixture Install/Remove Fuel Nozzle Insert | 1 | |
| 8C2896 | FIXTURE - INSTALL / REMOVE - FUEL PUMP VERTICAL | 1 | |
| 8C2896G01 | Fixture Install /Remove-Fuel Pump Vertical | 1 | |
| 8C2897 | FIXTURE - INSTALL / REMOVE - FMU VERTICAL | 1 | |
| 8C2897G01 | Fixture，install/remove-fmu vertical | 1 | |
| 8C2898 | FIXTURE - INSTALL / REMOVE - LUBE UNIT VERTICAL | 1 | |
| 8C2898G01 | Fixture，install/remove-fmu vertical | 1 | |
| 8C2899G01 | Fixture，install/remove-fmu vertical | 1 | |
| 8C2905G01 | Fixture,remove-a/o separator,no 2 brg | 1 | |
| 8C4113 | FIXTURE - REMOVE - FAN DISK - SPOOL | 1 | |
| 8C4115 | FIXTURE - REMOVE - BLADE LOW PRESSURE COMPRESSOR | 1 | |
| 956A1005G03 | Fixture, Install/Removestg 2 Aft Blade Retainer | 1 | |
| 956A1007G01 | Fixture,install/remove-shank nut,hptr-stg 2 | 1 | |
| 956A1012 | FIXTURE - INSTALL/REMOVE - COUPLING NUT - HPT ROTOR | 1 | |
| 956A1012G01 | Fixture,install/remove-coupling nut,hpt rotor | 1 | |
| 956A1022G01 | Fixture,install/remove-hpt rotor,fwd seal | 1 | |
| 956A1048 | FIXTURE - REMOVE - NO. 4 BRG INNER RACE | 1 | |
| 956A1049 | FIXTURE - REMOVE - NO 4 OIL SCOOP | 1 | |
| 956A1050 | FIXTURE REMOVE - NO. 4 SEAL RUNNER | 1 | |
| 956A1061G01 | Fixture, Remove - Stationary Seals, B-Sump | 1 | |
| 956A1062 | FIXTURE - REMOVE - STG 1 BLADE RETIANER - HPT | 1 | |
| 956A1067 | FIXTURE - REMOVE - NO 4 BRG INNER RACE - HORIZONTAL | 1 | |
| 956A1067G01 | Fixture,remove-No.4 BRG inner race,horizontal | 1 | |
| 956A1069G01 | Fixture,Remove-Tcf Hanger,Fwd | 1 | |
| 956A1114 | FIXTURE - TORQUE ADAPTER TO INSTALL/REMOVE TUBE IMPELLER | 1 | |
| 956A1114G01 | Fixture Torque Adapter To Install/Remove Tube Impell | 1 | |
| 956A1184 | FIXTURE - REMOVE - CDP / STG 6-10 | 1 | |
| 956A1206 | FIXTURE - REMOVE - CDN AFT HEAT SHIELD | 1 | |
| 956A1257G01 | Fixture, Remove/Install - Variable Center Of Gravity 1000 Lb Max | 1 | |
| 956A1261G01 | Fixture remove shroud hanger stage 1 hpt | 1 | |
| 956A1281G01 | Fixture, Remove - Cdn Aft Heat Shield | 1 | |
| 956A1282 | FIXTURE - INSTALL/REMOVE- SHANK NUT - CDP STATOR SEAL | 1 | |
| 956A1351 | FIXTURE - REMOVE - HPT AFT STATIONARY SEAL | 1 | |
| 956A1536 | FIXTURE - REMOVE - RETAINING PINS - HPC LOCKNUT | 1 | |
| 956A1536G01 | Fixture, Install And Remove - Retaining Pins Hpc Lock Nut | 1 | |
| 956A1536G02 | Fixture, Install And Remove - Retaining Pins Hpc Lock Nut | 1 | |
| 956A1738 | FIXTURE - INSTALL/REMOVE- SHANK NUT - HPTR STG 2 | 1 | |
| 956A1738G01 | Fixture,install/remove-shank nut,hptr-stg 2 | 1 | |
| 956A1738G02 | Fixture,install/remove-shank nut,hptr-stg 2 | 1 | |
| 956A1743G01 | Fixture, Install / Remove - Hpc Stator Flange Shoulder Pins | 1 | |
| 956A1803G03 | Fixture remove-cisk hpt rotor stg 2 | 1 | |
| 956A1803G04 | Fixture remove-cisk hpt rotor stg 2 | 1 | |
| 956A1816 | FIXTURE - INSTALL/REMOVE-HPT ROTOR - FWD SEAL | 1 | |
| 956A1819G01 | Fixture remove- NO 4 brg inner race horizontal | 1 | |
| 956A3005 | FIXTURE - INSTALL/REMOVE - STG 2 AFT BLADE RETAINER | 1 | |
| 956A3005G01 | Fixture,install/remove-stg 2aft blade retainer | 1 | |
| 956A3005G03 | Fixture,install/remove-stg 2aft blade retainer | 1 | |
| 956A3006 | FIXTURE - INSTALL/ REMOVE-HPTR MIDSEAL | 1 | |
| 956A3006G01 | Fixture Install/Remove-Hptr Interstage Seal | 1 | |
| 956A3010 | FIXTURE - INSTALL/REMOVE - DISK - HPTR - STG 2 | 1 | |
| 956A3010G03 | Fixture,remove-disk hpt rotor,stg 2 | 1 | |
| 956A3010G04 | Fixture remove-cisk hpt rotor stg 2 | 1 | |
| 956A3012 | FIXTURE - INSTALL/REMOVE-COUPLING NUT -HPT RTR STG 2 | 1 | |
| 956A3022 | FIXTURE - INSTALL/REMOVE- HPT ROTOR - FWD SEAL | 1 | |
| 956A3047 | FIXTURE - INSTALL/REMOVE - STG 1 BLADES - HPTR | 1 | |
| 956A3048 | FIXTURE - REMOVE - NO 4 BRG INNER RACE | 1 | |
| 956A3049 | FIXTURE - REMOVE - NO 4 OIL SCOOP | 1 | |
| 956A3050 | FIXTURE - REMOVE - NO 4 CARBON SEAL RUNNER | 1 | |
| 956A3061 | FIXTURE - REMOVE - STATIONARY SEALS - B-SUMP | 1 | |
| 956A3061G01 | Fixture remove stationary seals b sump | 1 | |
| 956A3062 | FIXTURE - REMOVE - STG 1 BLADE RETAINER - HPT | 1 | |
| 956A3062G01 | Fixture,remove-stg 1 blade retainer hpt | 1 | |
| 956A3069G01 | Fixture,Remove-Tcf Hanger,Fwd | 1 | |
| 956A3073 | FIXTURE - INSTALL/REMOVE- SHANK NUT - B-SUMP & TCF | 1 | |
| 956A3078G01 | fixture remove hpt aft stationary seal | 1 | |
| 956A3078G02 | Fixture, Remove-Hpt Aft Stationary Seal | 1 | |
| 956A3094 | FIXTURE - INSTALL / REMOVE - CARBON SEAL. NO. 4 | 1 | |
| 956A3094G02 | fixture install remove carbon seal no 4 bearing | 1 | |
| 956A3114 | FIXTURE - TORQUE ADAPTER TO INSTALL/REMOVE TUBE IMPELL | 1 | |
| 956A3132G01 | Fixture remove-rotor blade locking lugs | 1 | |
| 956A3504G01 | ffixture install remove seal rotating oil number 3 bearing | 1 | |
| 956A3564G02 | Fixture,install and remove-retaining pins hpc lock nut | 1 | |
| 956A3564G03 | Fixture,install and remove-retaining pins hpc lock nut | 1 | |
| 956A3743G01 | Fixture, Install / Remove - Hpc Stator Flange Shoulder Pins | 1 | |
| 956A6021G01 | FIXTURE, REMOVE/INSTALL TGB PISTON RING | 1 | |
| 956A6040 | FIXTURE -REMOVE-FAN AND BOOSTER | 1 | |
| 956A6063 | FIXTURE - REMOVE - SPACER - FAN DISK | 1 | |
| 956A6063G01 | FIXTURE, REMOVE - SPACER, FAN DISK | 1 | |
| 956A6063G02 | FIXTURE, REMOVE - SPACER, FAN DISK | 3 | |
| 956A6063G02 | FIXTURE REMOVE SPACER FAN BLADE | 3 | |
| 956A6063G03 | FIXTURE, REMOVE - SPACER, FAN DISK | 2 | |
| 956A6063G04 | FIXTURE, REMOVE -SPACER, FAN DISK | 4 | |
| 956A6065 | FIXTURE - REMOVE - SPACER - FAN DISK | 1 | |
| 956A6065G01 | FIXTURE, REMOVE - SPACER, FAN DISK | 2 | |
| 956A6071G01 | FIXTURE, REMOVE | 7 | |
| 956A6090 | FIXTURE - REMOVE - PLATFORM FRONT SHROUD | 1 | |
| 956A6090G02 | FIXTURE, REMOVE - PLATFORM FRONT SHROUD | 6 | |
| 956A6128 | FIXTURE - REMOVE - OIL SUPPLY - FAN HUB | 1 | |
| 956A6128G01 | Fixture Remove-Oil Supply Fan Hub | 1 | |
| 956A6129 | FIXTURE - REMOVE - BLANK OFF - ARM 8 O'CLOCK | 1 | |
| 956A6129G02 | Fixture, Instaluremove ·Blank Off, Arm 8 O'Clock | 1 | |
| 956A6311 | FIXTURE - REMOVE - ROTATING SEAL BEARING 4 | 1 | |
| 956A6311G01 | Fixture remove rotating seal bearing 4 | 1 | |
| 956A6318 | FIXTURE - REMOVE - LPT REAR FRAME | 1 | |
| 956A6318G01 | Fixture remove lpt rear frame | 1 | |
| 956A6490 | FIXTURE - REMOVE - LPT - RING SEAL | 1 | |
| 956A6490G02 | fixture remove lpt ring seal | 1 | |
| 956A6490G03 | fixture remove lpt ring seal | 1 | |
| 956A6490G04 | fixture remove lpt ring seal | 1 | |
| 956A6492 | FIXTURE - REMOVE - REARING #5 | 1 | |
| 956A6492G01 | Fixture,remove-lpt,bearing 5 outillage extraction roulement palier 5 | 1 | |
| 956A6492G02 | Fixture,remove-lpt,bearing 5 outillage extraction roulement palier 5 | 1 | |
| 956A6523 | FIXTURE - REMOVE - NO.5 BEARING FERRULE | 1 | |
| 956A6525 | FIXTURE - REMOVE - NO.5 BEARING SQUEEZE FILM | 1 | |
| 956A6525G02 | Fixture,remove-No.5 bearing squeeze film | 1 | |
| 956A6526G01 | Fixture，installation and removeal-retaining ring | 1 | |
| 956A6527G01 | Fixture,remove-No.5 bearing squeeze film | 1 | |
| 956A6655G01 | Fixture,install/remove-rear center vent tube | 1 | |
| 956A6655G03 | Fixture,install/remove-rear center vent tube | 1 | |
| 956A6803 | FIXTURE, INSTALL/REMOVE-SUPPORT BEARING 2 | 1 | |
| 956A6803G01 | Fixture，install/remove-support bearing 2 | 1 | |
| 956A6805G02 | Fixture，install/remove-support bearing1 pied de montage SP1 sur module | 1 | |
| 956A6814 | FIXTURE, REMOVE - BEARING 2 INNER RACE | 1 | |
| 956A6814G01 | Fixture remove bearing 2 inner race | 1 | |
| 956A6815G01 | Fixture,remove-bearing 2 outer race | 1 | |
| 956A6816 | FIXTURE, REMOVE - BEARING 1 INNER RACE | 1 | |
| 956A6816G02 | Fixture,remove-bearing 1 inner race | 1 | |
| 956A6816G03 | Fixture,remove-bearing 1 inner race | 1 | |
| 956A6818 | FIXTURE - REMOVE - SUPPORT BEARING 2 ASSY | 1 | |
| 956A6818G01 | Fixture，remove-support bearing 2 assy | 1 | |
| 956A6847 | FIXTURE - INSTALL/REMOVE BEARING SUPPORT 1/2 | 1 | |
| 956A6847G01 | Fixture，install/remove-support bearing 1/2 | 1 | |
| 956A6865 | FIXTURE - REMOVE - FAN DISK - SPOOL | 1 | |
| 956A6865G01 | Fixture remove fan disk spool | 1 | |
| 956A7001 | FIXTURE - LIFT - INSTALL/REMOVE - FAIRING - FLOW PATH | 1 | |
| 956A7014 | FIXTURE, REMOVE/INSTALL - PANEL FLOW PATH | 1 | |
| 956A7014G01 | FIXTURE, REMOVE/INSTALL - PANEL FLOW PATH | 4 | |
| 956A7015 | FIXTURE, REMOVE/INSTALL - SPLITTER FAIRING | 1 | |
| 956A7015G01 | FIXTURE, REMOVE/INSTALL - SPLITTER FAIRING | 3 | |
| 956A7018 | FIXTURE, REMOVE/INSTALL - ACCESSORY GEARBOX | 1 | |
| 956A7018G02 | FIXTURE, REMOVE/ INSTALL - AGB 1 | 4 | |
| 956A7606 | FIXTURE - INSTALL/REMOVE - TGB SLIDE | 2 | |
| 956A7606G01 | FIXTURE, REMOVE/INSTALL - TGB SLIDE | 1 | |
| 956A7606G02 | FIXTURE, INSTALL/REMOVE | 1 | |
| 956A7606G02? | FIXTURE, REMOVE/INSTALL - TGB SLIDE | 1 | |
| 956A7617G02 | FIXTURE, REMOVE | 5 | |
| 956A7618 | FIXTURE - REMOVE /INSTALL - LUBRICATION UNIT | 1 | |
| 956A7618G02 | FIXTURE, REMOVE /INSTALL - LUBRICATION UNIT | 4 | |
| 956A8051 | FIXTURE - REMOVE - SPACER - FAN BLADE | 1 | |
| 956A8051G02 | FIXTURE, FAN BLADE SPACER REMOVER | 6 | |
| 956A8062 | FIXTURE - REMOVE - PLATFORM FRONT SHROUD | 1 | |
| 956A8062G02 | FIXTURE, REMOVE - PLATFORM FRONT SHROUD | 5 | |
| 956A8074 | FIXTURE - REMOVE/INSTALL - PANEL FLOW PATH | 1 | |
| 956A8074G01 | FIXTURE, REMOVE/INSTALL - PANEL FLOW PATH | 2 | |
| 956A8076 | FIXTURE - REMOVE/INSTALL - TGB ASSEMBLY | 1 | |
| 956A8076G02 | FIXTURE, REMOVE/INSTALL - TGB ASSEMBLY | 3 | |
| 956A8102 | FIXTURE - INSTALL - REMOVE - SLEEVE - RADIAL SHAFT | 1 | |
| 956A8102G01 | Fixture,install,remove-sleeve radial shaft outillage de mise en position fourreau rds | 1 | |
| 956A8102G02 | Fixture,install,remove-sleeve radial shaft outillage de mise en position fourreau rds | 1 | |
| 956A8102G03 | Fixture,install,remove-sleeve radial shaft outillage de mise en position fourreau rds | 1 | |
| 956A8113 | FIXTURE - REMOVE - HOUSING - BEARING 3 DAMPER | 1 | |
| 956A8113G01 | Fixture,remove-housing,bearing 3 damper | 1 | |
| 956A8113G02 | Fixture,remove-housing,bearing 3 damper | 1 | |
| 956A8113G03 | Fixture,remove-housing,bearing 3 damper | 1 | |
| 956A8119G01 | Fixture,remove-shroud,compressor outillage extraction virole | 1 | |
| 956A8150 | FIXTURE - REMOVE - SLEEVE N1 SENSOR | 1 | |
| 956A8150G02 | Fixture，remove-sleeve n1 sensor | 1 | |
| 956A8302G02 | Fixture remove lpt assy rotating seals | 1 | |
| 956A8320 | FIXTURE - REMOVE - RING SEAL | 1 | |
| 956A8320G01 | Fixture,remove-ring seal outillage dextraction anneau labyrinthe | 1 | |
| 956A8321 | FIXTURE - REMOVE - LPT SHAFT | 1 | |
| 956A8321G01 | Fixture,remove-lpt shaft extracteur arbre tubp | 1 | |
| 956A8402 | FIXTURE - INSTALL/REMOVE - RING - SEAL-REAR ENCLOSURE | 1 | |
| 956A8402G01 | Fixture,install/remove-ring seal,rear enclosure | 1 | |
| 956A8402G02 | Fixture,install/remove-ring seal,rear enclosure | 1 | |
| 956A8402G03 | Fixture,install/remove-ring seal,rear enclosure | 1 | |
| 956A8403 | FIXTURE - INSTALL/REMOVE - RING - SEAL | 1 | |
| 956A8403G01 | Fixture,install/remove-ring,seal outillage | 1 | |
| 956A8403G02 | Fixture,install/remove-ring,seal outillage | 1 | |
| 956A8403G03 | Fixture,install/remove-ring,seal outillage | 1 | |
| 956A8452 | FIXTURE - REMOVE - RING - RETAINER LPT STG 4 - 5 | 1 | |
| 956A8513 | FIXTURE - REMOVE - SUPPORT - SEG RADIAL SEAL | 1 | |
| 956A8601 | FIXTURE - INSTALL/REMOVE TRV | 1 | |
| 956A8601G01 | TRV INSTALL AND REMOVE FIXTURE | 1 | |
| 956A8622 | FIXTURE - REMOVE - LPT REAR FRAME ASSY | 1 | |
| 956A8622G01 | Fixture,remove,install-lpt rear case assy | 1 | |
| 956A8631 | FIXTURE - INSTALL/REMOVE - LPT NUT - RETAINING RING | 1 | |
| 956A8631G01 | Fixture,install/remove-lpt nut,retaining ring | 1 | |
| 956A8637 | FIXTURE - REMOVE - LPT REAR FRAME ASSY | 1 | |
| 956A8651 | FIXTURE - INSTALL/REMOVE-FRONT CENTER VENT TUBE | 1 | |
| 956A8670G02 | FRONT SPINNER REMOVE/INSTALL FIXTURE | 4 | |
| 956A8685 | FIXTURE - REMOVE/INSTALL - TGB SLIDE | 1 | |
| 956A8685G02 | FIXTURE, REMOVE/INSTALL - TGB SLIDE | 4 | |
| 956A8685G03 | TGB SLIDE REMOVE/INSTALL FIXTURE | 1 | |
| 956A8803 | FIXTURE - INSTALL/REMOVE- SUPPORT BEARING 2 | 1 | |
| 956A8803G01 | Fixture，install-remove support bearing 2 | 1 | |
| 956A8805 | FIXTURE - INSTALL/REMOVE- SUPPORT BEARING 1 | 1 | |
| 956A8805G01 | Fixture,install-remove support bearing 1 | 1 | |
| 956A8814 | FIXTURE - REMOVE - BEARING 2 INNER RACE | 1 | |
| 956A8814G01 | Fixture，remove-bearing2 innerrace | 1 | |
| 956A8816 | FIXTURE - REMOVE - BEARING 1 INNER RACE | 1 | |
| 956A8816G01 | Fixture remove bearing 1 inner race | 1 | |
| 956A8816G02 | Fixture remove bearing 1 inner race | 1 | |
| 956A8817 | FIXTURE - REMOVE - SUPPORT BEARING 2 ASSY | 1 | |
| 956A8817G02 | Fixture remove support bearing 2 assy | 1 | |
| 956A8832G01 | Fixture,remove-shaft extracteur d arbre | 1 | |
| 956A8842 | FIXTURE - REMOVE - SUPPORT BEARING 2 | 1 | |
| 956A8842G01 | Fixture，remove-support bearing 2 | 1 | |
| 956A8843G01 | Fixture remove bearing 2 balls | 1 | |
| 956A8863 | FIXTURE - REMOVE - FAN DISK - SPOOL | 1 | |
| 9C1004G01 | FIXTURE, STAGE 2 AFT BLADE RETAINER INSTALL/REMOVE | 1 | |
| 9C1014 | FIXTURE, REMOVE, OGV | 1 | |
| 9C1017 | FIXTURE REMOVE/INSTALL | 1 | |
| 9C1017G01 | FIXTURE, REMOVE/INSTALL - VARIABLE CENTER OF GRAVITY | 1 | |
| 9C1017G02 | FIXTURE, REMOVE/INSTALL - VARIABLE CENTER OF GRAVITY | 1 | |
| 9C1050G01 | FIXTURE, REMOVE/INSTALL - VARIABLE CENTER OF GRAVITY (CG BAR) | 1 | |
| 9C1052 | FIXTURE, REMOVE - STG 2 HP TUR | 1 | |
| 9C1127 | FIXTURE INSTALL/REMOVE | 1 | |
| 9C1132 | FIXTURE INSTALL/REMOVE - LINE REPLACEABLE UNITS | 1 | |
| 9C1132G02 | FIXTURE, INST-REMOVE | 1 | |
| 9C1132G05 | FIXTURE INSTALL / REMOVE LINE REPLACEABLE UNITS | 3 | |
| 9C1132G05 8 | FIXTURE INSTALL / REMOVE LINE REPLACEABLE UNITS | 1 | |
| 9C1172G03 | Fixture，install/remove-accessory gearbox module | 1 | |
| 9C1238G04 | FIXTURE, INSTALL/REMOVE HEAT SHIELD, HIGH PRESSURE TURBINE ROTOR | 1 | |
| 9C1281G02 | Fixture,remove-stg 2 hpt shroud/hanger subassy | 1 | |
| 9C1310 | FIXTURE, INSTALL/REMOVE STAGE | 1 | |
| 9C1310G01 | FIXTURE, INSTALL/REMOVE STAGE 2 HP TURB ROTOR DISK (INSTALL/REMOVE FIXTURE) | 1 | |
| 9C1361 | FIXTURE, INSTALL/REMOVE FAN | 1 | |
| 9C3185 | FIXTURE, INSTALL/REMOVE - COUPLING NUT, HPT RTR STG 2 | 1 | |
| 9C3403 | FIXTURE, INSTALL/REMOVE - LINE REPLACEABLE UNITS | 1 | |
| B27053-1 | Fixture Spring Install / Remove | 2 | |
| C32034-211 | FIXTURE-TRANSPORTATION MLG REMOVE/INSTALLATION EQPT | 4 | |
| C32034-211 | FIXTURE-TRANSPORTATION MLG REMOVE/INSTALLATION EQPT | 4 | |
| IAE 1P16067 | INSTALL AND REMOVE FIXTURE | 1 | |
| IAE1F10073 | FIXTURE, REMOVE/INSTALL | 1 | |
| IAE1F10261 | FIXTURE, REMOVE/INSTALL. | 1 | |
| IAE1P16010 | FIXTURE, INSTALL/REMOVE | 1 | |
| IAE1P16046 | FIXTURE, REMOVE/INSTALL LHT Dwg No.(537250041) | 3 | |
| IAE1P16058 | REMOVE/INSTALL JAWS FIXTURE | 2 | |
| IAE1P16077 | FIXTURE, INSTALL/REMOVE | 1 | |
| IAE1P16384 | FIXTURE REMOVE/INSTALL | 1 | |
| IAE1P17750 | FIXTURE, INSTALL/REMOVE LHT Dwg No.(537250203) | 1 | |
| P35 | FIXTURE, INSTALL AND REMOVE - INLET GEARBOX MODULE (INSTALL AND REMOVE FIXTURE) | 1 | |
| PWA 80262 | FIXTURE, REMOVE/INSTALL | 1 | |
| PWA 85520 | FIXTURE, INSTALL AND REMOVE | 1 | |
| PWA 85749 | FIXTURE, INSTALL AND REMOVE CONNECTOR | 2 | |
| PWA 85769 | FIXTURE, INSTALL/REMOVE | 1 | |
| PWA102124 | FIXTURE, INSTALL/REMOVE | 1 | |
| PWA105767 | FIXTURE REMOVE - LPC FAN BLADE LOCK | 1 | |
| PWA107707 | FIXTURE, INSTALL/REMOVE (SUPERSEDES PWA 85769) | 1 | |
| PWA80262 | FIXTURE,REMOVE/INSTALL | 1 | |
| PWA85520 | FIXTURE, INSTALL AND REMOVE | 1 | |
| PWA85769 | FIXTURE, INSTALL/REMOVE (SUPERSEDED BY PWA 107707) | 1 | |
| PWA87034 | FIXTURE, INSTALL AND REMOVE | 1 | |
| PWA87360 | FIXTURE, INSTALL/REMOVE | 4 | |
| REP4M6-4FS428 | BEARING REMOVE FIXTURE | 1 | |
| 956A8062G02 | FIXTURE REMOVE- PLATFORM FRONT SHROUD | 5 | |
| 956A6065G01 | REMOVE FIXTURE,FAN DISK SPACER,SUPPORT E | 2 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
