| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| HS9791 | FIXTURE POSITIO | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 0S22939 | FIXTURE POSITIONING | 1 | |
| 0U144973 | POSITIONAL FIXTURE | 1 | |
| 0U144976 | POSITIONAL FIXTURE | 1 | |
| 11C3430 | FIXTURE - POSITION - ENGINE MOUNT - AFT | 1 | |
| 123 | BOEING TRANSDUCER POSITIONER FIXTURE 737 PT 4 52-10-01 | 2 | |
| 10108 | A350 VERTICAL SUPPORT TO HOLD THE HOLDING FIXTURE IN VERTICAL POSITION | 1 | |
| 123T465 | PROBE POSITION FIXTURE | 1 | |
| 1P16059 | POSITION FIXTURE (FOR "A1" jwc) | 1 | |
| 21C7479G01 | POSITIONING, GAS GENERATOR COOLING PLATES FIXTURE | 1 | |
| 293348-1 | SPACER POSITIONER FIXTURE ASSEMBLY | 1 | |
| 293714-1 | SHAFT POSITIONING FIXTURE | 1 | |
| 2C14280 | FIXTURE, POSITION-FUEL NOZZLE | 1 | |
| 2C14280G01 | POSITION FIXTURE-FUEL NOZZLE | 2 | |
| 2C14712 | FIXTURE,POSITIONING-HORIZONTAL DRIVE SHAFT HOUSING | 1 | |
| 2C14712G01 | FIXTURE - POSITION | 8 | |
| 2C14778G01 | FIXTURE, TUBE POSITIONING | 2 | |
| 2C15051G02 | FIXTURE, PRESSURE - AXIAL POSITION | 1 | |
| 2C15600G01 | FIXTURE, POSITION-COMPR REAR FRAME SUMP | 1 | |
| 2C6178 | FIXTURE, POSITIONING COMPR. STATOR | 1 | |
| 2C6178G01 | FIXTURE SET, POSITION VSV | 1 | |
| 2C6178G11 | FIXTURE SET, POSITION - VSV | 1 | |
| 2C6178G13 | FIXTURE SET, POSITION - VSV | 1 | |
| 2C6I78 | FIXTURE, POSITIONING COMPR. STATOR | 1 | |
| 2C7090 | FIXTURE,POSITION-TMF COUNTER E | 1 | |
| 2C7090G01 | FIXTURE,POSITION-TMF COUNTER E | 1 | |
| 2C7284 | FIXTURE SET, POSITIONING - CRF | 1 | |
| 2C7284G01 | FIXTURE SET, POSITIONING - CRF | 1 | |
| 2C7761G02 | FIXTURE, POSITIONING-STAGE 8 MANIFOLD | 1 | |
| 2C7761P31 | FIXTURE, POSITIONING-STAGE 8 MANIFOLD | 1 | |
| 2C90479G01 | FIXTURE, GAS GENERATOR COOLING PLATES POSITIONING | 1 | |
| 2C91031G01 | Fixture Accessory Drive Gearbox (AGB) Positionning | 1 | |
| 2F10321 | FIXTURE CHECKING AXIAL POSITION LPT SHAFT | 1 | |
| 2TSJ65B01539-1 | TEST FIXTURE - ACTUATOR, TRUCK POSITIONER, WING LANDING GEAR | 1 | |
| 35M5M01060000 | FIXTURE; POSITIONING, ANGLE-OF-ATTACK SENSOR | 1 | |
| 627A100-A | HORIZONTAL STABILIZER FIXING/POSITIONING FIXTURE | 1 | |
| 63811-8675 | TOOL POSITIONING FIXTURE | 1 | |
| 649-0667-001 | POSITION CALIBRATION FIXTURE | 1 | |
| 6872536 | FIXTURE POSITIONING COMBUSTION LINER AFT SECTION | 1 | |
| 6877001 | TACK WELD FIXTURE, COVER HOLDS FUEL NOZZLE COMPONENTS IN POSITION DURING INLET COVER TACK WELD PROCEDURE. | 1 | |
| 6877004 | STEM STRAIGHTENING FIXTURE HOLDS FUEL NOZZLE WHILE ADJUSTING METERING TIP POSITION. | 1 | |
| 6877024 | TACK WELD FIXTURE, PRIMARY AND SECONDARY HOLDS SUPPORT AND METERING SET BODY COMPONENTS IN POSITION DURING TACK WELD OPERATIONS. | 1 | |
| 6877028 | STEM HOLDING FIXTURE HOLDS WEAR SLEEVE AND FUEL NOZZLE IN POSITION DURING TACK WELD OPERATION. | 1 | |
| 68920-652 | GEARWHEEL POSITIONING FIXTURE | 1 | |
| 6897006 | PRESSURE TEST FIXTURE, INLET COVER HOLDS INLET COVER IN POSITION DURING WELD REPAIR PRESSURE TEST. | 1 | |
| 6899966 | FIXTURE-COMBUSTION LINER POSITIONING | 2 | |
| 833549-1 | FIXTURE GAGE STOP POSITION | 1 | |
| 833549-1PM | STOP POSITION FIXTURE GAGE | 1 | |
| 834778-1 | POSITIONING FIXTURE, | 1 | |
| 856A1102G03 | ADAPTER, HORIZONTAL LIFT - FIXTURE （TO ADAPT THE VARIOUS HORIZONTAL LIFT FIXTURES FOR LIFTING IN THE VERTICAL AND HORIZONTAL POSITIONS.） | 10 | |
| 856A1193G07 | FIXTURE, MEASURE – VARIABLE BLEED VALVE – POSITION | 2 | |
| 856A1343 | FIXTURE, POSITION/RESTRAINT VSV LEVER ARMS | 1 | |
| 856A1343 REV C | FIXTURE, POSITION/RESTRAINT VSV LEVER ARMS | 1 | |
| 856A1424G04 | FIXTURE LIFT COMBUSTION VERT HORIZ (1EA COVER)(TO PROVIDE A MEANS BY WHICH THE COMBUSTORS CAN BE LIFTED IN BOTH HORIZONTAL AND VERTICAL POSITIONS.) | 10 | |
| 856A2001G04 | FIXTURE INDICATOR VSV POSITION | 2 | |
| 856A2001P17 | FIXTURE, INDICATE -VSV POSITION DYNAMIC RIG SIGNAL CONDITIONER | 1 | |
| 856A3437G01 | Positioning Fixture | 1 | |
| 856A4078G01 | FIXTURE, POSITION/WELD – IGNITER FERRULE RETAINERS, COMBUSTOR | 1 | |
| 856A4096G01 | FIXTURE,POSITION/WELD-IGNITER SLEEVE,C | 1 | |
| 956A6843 | FIXTURE - POSITIONING BEARING SUPPORT 1/2 | 1 | |
| 956A8001 | FIXTURE - LIFTING AND POSITIONNING - SHROUD FAN FRAME | 1 | |
| 956A8839 | FIXTURE - POSITIONING - TUBES - 1 & 2 BEARING SUPPORT | 1 | |
| 98A57203000000 | POSITIONNING AND DRILLING FIXTURE | 1 | |
| 99A34201003000 | FIXTURE-POSITIONING,AOA SENSOR | 1 | |
| 9C1165 | FIXTURE POSITION - ENGINE MOUNT AFT | 1 | |
| 9C1165G01 | FIXTURE POSITION -EN | 3 | |
| 9C1165G02 | FIXTURE POSITION ENGINE MOUNT AFT | 3 | |
| 9C1185 | FIXTURE, POSITIONING - THRUST | 1 | |
| AFC-0510F | TRANSDUCER POSITIONING FIXTURE PT 4 57-50-07 FIG 3 | 1 | |
| B157 | FIXTURE,ELEVATOR POSITIONING | 1 | |
| B32041 | TEST FIXTURE -0 TRUCK POSITION ACTUATOR, MLG | 1 | |
| B32041-1 | TEST FIXTURE - TRUCK POSITION ACTUATOR, MAIN LANDING GEAR | 2 | |
| BTR-1383 | VANE ZERO FIXTURE ±0.025° POSITIONING ACCURACY | 1 | |
| BTR-2867 | VANE INDEXING FIXTURE ±0.025° POSITIONING ACCURACY | 1 | |
| C117-00-1095 | PS WELD POSITIONING FIXTURE | 1 | |
| C117-00-1096 | PPM WELD POSITIONING FIXTURE | 1 | |
| C27206 | FIXTURE,POSITIONING-TMF SEAL | 1 | |
| C27206G01 | FIXTURE,POSITIONING-TMF SEAL | 1 | |
| F72831-1 | TEST FIXTURE - FLAP POSITION TRANSMITTER | 1 | |
| F72831-10 | TEST FIXTURE - FLAP POSITION TRANSMITTER | 1 | |
| F72831-14 | TEST FIXTURE - FLAP POSITION TRANSMITTER | 1 | |
| F72831-21 | TEST FIXTURE - FLAP POSITION TRANSMITTER | 1 | |
| F72953 | INSTL. FIXTURE -0 VENTRAL STAIRS TO POSITION FWD | 1 | |
| G600-272002-1 | FIXTURE LASER RUDDER RIGGING & NEUTRAL POSITION | 1 | |
| G601R272003-1 | FIXTURE - RUDDER RIGGING & NEUTRAL POSITION | 4 | |
| G601R272003−1 | Fixture − Rudder and Neutral Position | 4 | |
| G601R273301-1 | POSITIONING FIXTURE | 2 | |
| GS10396-1 | THROTTLE VALVE POSITION FIXTURE | 1 | |
| GS10689-1 | LEVER POSITIONING FIXTURE | 1 | |
| GS13809-1 | FIXTURE, SERVO POSITION | 1 | |
| GS14953-1 | FIXTURE, POSITIONING | 1 | |
| GS15187-1 | FIXTURE, DISC. POSITIONING | 1 | |
| GS15724-1 | FIXTURE, POSITIONING | 1 | |
| GS19316-1 | STOP PLATE POSITION FIXTURE | 1 | |
| GS19757-1 | FIXTURE, POSITION INDICATOR | 2 | |
| GS20259-1 | FIXTURE, PC POSITION ADJUST | 1 | |
| GS20710-1 | FIXTURE, ADJ, SCREW POSITIONER | 1 | |
| GS21936-1 | FIXTURE, VALVE POSITIONING | 1 | |
| GS22022-1 | FIXTURE.POSITION INDICAT | 1 | |
| GS24100-1 | FIXTURE, BORESCOPE POSITIONING | 1 | |
| GS24166-1 | RETROFIT KIT, BOROSCOPE POSITIONING FIXTURE; 24PF | 1 | |
| GS24705-1 | POSITION FIXTURE | 1 | |
| HS7594 | FIXTURE-BLADE GEAR POSITIONING | 1 | |
| HS8823 | FIXTURE SHAFT POSITION | 1 | |
| HS9138 | FIXTURE - LOADING & POSITIONING | 1 | |
| HU37639-2 | FIXTURE - POSITION, LP TURBINE SPEED PROBES. | 4 | |
| J52046-1 | Positioning fixture and strongback-main landing gear door | 1 | |
| J52046-2 | Positioning fixture and strongback-main landing gear door | 1 | |
| J71037-1 | POSITION FIXTURE - AFT ENGINE MOUNT (RR ENGINE) | 10 | |
| LTCT7991 | Fixture, Positioning | 1 | |
| MIT65B82429 | SETTING FIXTURE - POSITION TRANSMITTER, STABILIZER | 1 | |
| OU144973 | Positional Fixture | 1 | |
| OU144976 | Positional Fixture | 1 | |
| PWA76098 | FIXTURE-CALIBRATION TRANDUCER BLEED POSITION | 1 | |
| PWA76099 | FIXTURE CALIBRATION-TRANDUCER BLEED POSITION | 1 | |
| RB6899966 | Fixture-Combustion Liner Positioning | 2 | |
| SLZ7804 | PROBE POSITION FIXTURE | 1 | |
| SSW9-217610-01 | Alignment Fixture (Stop Spring Position) (Optional) | 1 | |
| ST70137 | Holder, Maintanence Fixture, Multi-Position | 1 | |
| TE3811-5008 | POSITIONING FIXTURE | 1 | |
| TEK 5005F | TRANSDUCER POSITIONING FIXTURE | 1 | |
| TM0856G001 | POSITIONING FIXTURE | 2 | |
| 98A27309012000 | HTP FIXTURE,USE TO FIXTURE POSITION THE | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
