| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| HS7056 | FIXTURE MACHINI | 1 | |
| HS7299 | FIXTURE MACHINI | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 11C3001 | FIXTURE - MACHINING FAN CASE | 1 | |
| 11C3001G03 | FIXTURE-FAN CASE SHROUD MACHINING (ALT SPL-13736) | 1 | |
| 11C3001G07 | FIXTURE, MACHINING FAN CASE SHROUD | 1 | |
| 11C3490 | FIXTURE - INSPECTION/MACHINING RESTRAIN-HP TURB CASE | 1 | |
| 18C1316 | FIXTURE, MACHINING - FAN | 1 | |
| 1C6193 | FIXTURE SET, MACHINING - FRONT COMPRESSOR STATOR | 1 | |
| 1C6193 REV B | FIXTURE SET, MACHINING - FRONT COMPRESSOR STATOR | 1 | |
| 21C7197G01 | FIXTURE, INSPECTION, MACHINING | 1 | |
| 21C7200G01 | MACHINING FIXTURE | 1 | |
| 21C7283G01 | FIXTURE, MACHINING | 1 | |
| 21C7284G01 | FIXTURE, MACHINING | 1 | |
| 21C7285G01 | FIXTURE, MACHINING | 1 | |
| 21C7286G01 | FIXTURE, MACHINING | 1 | |
| 21C7760G01 | FIXTURE, MACHINING | 1 | |
| 291866-1 | BEARING CARRIER MACHINING FIXTURE | 1 | |
| 291867-1 | BEARING CARRIER MACHINING FIXTURE | 1 | |
| 2C15042G03 | FIXTURE,MACHINING AND INSPECTION- HPT COUP. NUT | 2 | |
| 2C15620G01 | FIXTURE, MACHINING | 1 | |
| 2C15637G01 | MACHINING / INSPECTION FIXTURE | 1 | |
| 2C5712G01 | FIXTURE - MACHINING | 1 | |
| 2C5786G01 | FIXTURE - MACHINING SUMP SEALS | 1 | |
| 2C6537 | FIXTURE SET, MACHINING-C/R S | 1 | |
| 2C6537G01 | FIXTURE SET, MACHINING-C/R S | 1 | |
| 2C6538 | FIXTURE SET, MACHINING-C/R | 1 | |
| 2C6538G01 | FIXTURE SET, MACHINING-C/R | 1 | |
| 2C6539 | FIXTURE SET, MACHINING - C/R | 1 | |
| 2C6539G01 | FIXTURE SET, MACHINING - C/R | 1 | |
| 2C6544 | FIXTURE SET, MACHINING | 1 | |
| 2C6544G01 | FIXTURE SET, MACHINING | 1 | |
| 2C6546 | FIXTURE SET, MACHINING | 1 | |
| 2C6546G01 | FIXTURE SET, MACHINING | 1 | |
| 2C7048G02 | MACHINING AND INSPECTION FIXTURE | 1 | |
| 2C7143 | FIXTURE,MACHINING-TMF LINER | 1 | |
| 2C7143G01 | FIXTURE,MACHINING-TMF LINER | 1 | |
| 2C7511G01 | FIXTURE, MACHINING, TMF LINER | 1 | |
| 2C7512G03 | MACHINING FIXTURE, TMF LINER (MACHINING/ INSPECTION FIXTURE) | 1 | |
| 2C7760 | FIXTURE,MACHINING/WELDING-COMB | 1 | |
| 2C7760G01 | FIXTURE,MACHINING/WELDING-COMB | 1 | |
| 2C7856G01 | MACHINING FIXTURE, INNER LINER CUTOFF | 1 | |
| 2C91122G01 | FIXTURE-MACHINING TURBINE SEAL | 1 | |
| 2C91123G01 | FIXTURE-MACHINING TURBINE SEAL | 1 | |
| 2C91124G01 | FIXTURE-MACHINING TURBINE SEAL | 1 | |
| 2C91297G01 | FIXTURE - MACHINING - FAN DISK | 1 | |
| 2R1495 | MACHINING FIXTURE, OUTER LINER CUTOFF | 1 | |
| 3J12727 | Fixture, Machining | 1 | |
| 65-44761-F19 | Machining Fixture | 1 | |
| 6872632 | FIXTURE - MACHINING, COMPRESSOR CASE | 1 | |
| 6872760 | FIXTURE - MACHINING, OIL FILTER | 1 | |
| 6877003 | TURNING FIXTURE, SUPPORT MOUNTING FLANGE HOLDS FUEL NOZZLE FOR MACHINING OF MOUNTING FLANGE SEAL SURFACE. | 1 | |
| 6877005 | HOLDING FIXTURE, VALVE END HOLDS FUEL NOZZLE DURING CUTTING, MACHINING, AND WELDING OF VALVE END COMPONENTS. | 1 | |
| 6877006 | HOLDING FIXTURE, CHECK VALVE PLUG HOLDS FUEL NOZZLE DURING MACHINING OF CHECK VALVE PLUG WELD. | 1 | |
| 6877010 | HOLDING FIXTURE, TIP END HOLDS FUEL NOZZLE DURING CUTTING, MACHINING, AND WELDING OF TIP END COMPONENTS. | 1 | |
| 6877014 | PURGE FIXTURE, AIR (CHECK VALVE REMOVAL) BACK PRESSURES FUEL NOZZLE TO BLOW CHIPS OUT OF NOZZLE DURING CHECK VALVE MACHINING OPERATION. | 1 | |
| 6897008 | FACE PLATE ADAPTER MOUNTS MACHINING AND WELD FIXTURES TO LATHE. | 1 | |
| 83760372 | MACHINING FIXTURE | 1 | |
| 83760377 | MACHINING FIXTURE | 1 | |
| 856A 2369G02 | FIXTURE MACHINING NO. 5 OUTER RACE SLEEVE | 1 | |
| 856A-3265-G04 | Fixture, Machining | 4 | |
| 856A1056G04 | FIXTURE, MACHINING - HPC FRONT CASE (MACHINING FIXTURE)G02 | 5 | |
| 856A1056G05 | MACHINING FIXTURE | 8 | |
| 856A2314G05 | MACHINING FIXTURE - FAN FRAME | 1 | |
| 856A2369G02 | MACHINING FIXTURE - N5 BRG OUTER | 1 | |
| 856A2720P49 | MACHINING FIXTURE - FAN FRAME | 1 | |
| 856A2723G03 | FIXTIJE. MCHINING, SLEEVE,ADJUSTING - NO. 5 BEARING (MACHINING FIXTURE) | 1 | |
| 856A2723G04 | MACHINING FIXTURE - SLEEVE N°5 BRG OUTER RACE | 1 | |
| 856A2723G05 | MACHINING FIXTURE - SLEEVE N5 BRG | 2 | |
| 856A2907G01 | FIXTURE, MACHINING - ABRADABLE STRIP FAN CASING (MACHINING FIXTURE) | 1 | |
| 856A2907G04 | MACHINING FIXTURE - FAN FRAME ABRADABLE LINER | 1 | |
| 856A2907G05 | MACHINING FIXTURE - FAN FRAME | 2 | |
| 856A3120 | FIXTURE, MACHINING | 1 | |
| 856A3265G03 | FIXTURE, MACHINING-SLEEVE | 2 | |
| 856A3265G04 | FIXTURE, MACHINING-SLEEVE | 4 | |
| 856A3265G05 | MACHINING FIXTURE | 1 | |
| 856A3549G03 | FIXTURE, MACHINING ABRADABLE STRIP | 5 | |
| 856A3580 | FIXTURE, MACHINING - FAN CASING ABRADABLE STRIP | 1 | |
| 856A3580G03 | FIXTURE MACHINING | 1 | |
| 856A3776G01 | Fixture, Machining Adradable Strip | 1 | |
| 856A3784G01 | Fixture, Axial Load Abradable Strip Machining | 1 | |
| 856A3791 | MACHINING FIXTURE - SLEEVE N 5 BRG OUTER RACE | 1 | |
| 856A3791G03 | FIXTURE, MACHINING, SLEEVE, ADJUSTING - NO. 5 BEARING (MACHINING FIXTURE) | 1 | |
| 856A3791G04 | Fixture, Machining, Sleeve, Adjusting - No. 5 Bearing | 3 | |
| 856A4026G02 | FIXTURE MACHINING NO. 3 BEARING FORWARD STATIONARY OIL SEAL | 1 | |
| 856A4028G02 | FIXTURE,MACHINING-COMPR ROTOR AIR DUCT | 1 | |
| 856A4044G01 | FIXTURE MACHINING COMPRESSOR ROTOR SPOOL, STAGE4 THRU STAGE 9 | 1 | |
| 856A4046G02 | FIXTURE MACHINING COMPRESSOR ROTOR SHAFT | 1 | |
| 856A4076G02 | Weld & Machining Fixture | 1 | |
| 856A4076GO1 | Weld & Machining Fixture | 1 | |
| 856A4230 | (RT) FIXTURE, MACHINING LINER, OUTER-COMB CHAMBER | 1 | |
| 856A4230G03 | FIXTURE, MACHINING – OUTER LINER, COMBUSTION CHAMBER | 1 | |
| 856A4234G03 | FIXTURE SET, MACHINING HPT ROTOR SHAFT - FRONT | 1 | |
| 856A4265 | FIXTURE, MACHINING - HPTR REARSHAFT | 1 | |
| 856A4265G01 | Machining Fixture - Hot Aft Shaft | 1 | |
| 856A5640G02 | MACHINING FIXTURE - LPT COOLING AIR | 1 | |
| 856A5672G01 | FIXTURE, HOLDING EDM MACHINING SLOT NOZZLE | 1 | |
| 856A5795G01 | MACHINING & CHECKING FIXTURE LPT | 1 | |
| 856A5795G02 | MACHINING & CHECKING FIXTURE LPT | 1 | |
| 856A5796G01 | MACHINING & CHECKING FIXTURE LPT | 1 | |
| 856A5797G01 | MACHINING & CHECKING FIXTURE LPT | 1 | |
| 856A6772G02 | FIXTURE CHECKING MACHINING | 1 | |
| 856A6776G01 | Fixture, Checking/Machining | 1 | |
| 856A6778G01 | Fixture, Checking/Machining | 1 | |
| 856A6780G01 | Fixture, Checking/Machining | 1 | |
| 856A6782G01 | Fixture, Checking/Machining | 1 | |
| 856A6784G01 | FIXTURE MACHINING | 1 | |
| 856A6786G01 | FIXTURE MACHINING | 1 | |
| 856A6788G01 | MACHINING FIXTURE | 1 | |
| 856A6792G02 | AFT SHROUD FACES MACHINING FIXTURE - LPT | 1 | |
| 9C1703 | FIXTURE, MACHINING VANES SECT, | 1 | |
| 9R7066 | (RT) FIXTURE, MACHINING- STG1 FAN CASE SHROUD | 1 | |
| 9R7066G02 | FIXTURE MACHINING-STAGE 1 FAN CASE SHROUD (GRIND TOOL) | 1 | |
| 9R7066G03 | FIXTURE MACHINING-STAGE 1 FAN CASE SHROUD (GRIND TOOL) | 1 | |
| 9R7066G04 | FIXTURE MACHINING-STAGE 1 FAN CASE SHROUD (GRIND TOOL) | 1 | |
| 9R7066G06 | FIXTURE, MACHINING | 1 | |
| EVT3745T130 | MACHINING FIXTURE | 1 | |
| HS7873 | FIXTURE,MACHINING,V | 1 | |
| HSP2479 | FIXTURE, MACHINI | 1 | |
| IAE3J12772 | MACHINING FIXTURE | 1 | |
| IAE3J12801 | Machining fixture | 1 | |
| IAE3M14514 | MACHINING FIXTURE | 1 | |
| KRRT025629 | MACHINING FIXTURE | 1 | |
| LTCT11491 | Fixture, Machining | 1 | |
| MF165-44761 | Machining Fixture | 1 | |
| MF265-44761 | Machining Fixture | 1 | |
| PWA46215 | MACHINING FIXTURE | 1 | |
| PWA72173 | MACHINING FIXTURE | 1 | |
| PWA85557 | MACHINING FIXTURE | 1 | |
| PWA85682 | Fixture, Constraint - Hub, LPT 5th Stage, Machining & Inspection | 2 | |
| PWC38101 | FIXTURE, HOLDING, LOW PRESSURE VANE RING SEAL MACHINING | 2 | |
| PWC54874 | FIXTURE MACHINING HP BLADES | 1 | |
| PWC57563 | Fixture, machining | 1 | |
| PWC57564 | Fixture, machining | 1 | |
| PWC61087 | MACHINING FIXTURE | 1 | |
| PWC61768 | FIXTURE-MACHINING | 1 | |
| RRT001959 | MACHINING FIXTURE | 1 | |
| RRT025629 | MACHINING FIXTURE | 1 | |
| RRT025687 | MACHINING FIXTURE | 1 | |
| SAALC7744951 | 9TH MACHINING FIXTURE | 1 | |
| SAALC7744958 | 11TH MACHINING FIXTURE | 1 | |
| SAALC7744959 | 11TH MACHINING FIXTURE | 1 | |
| SAALC7744963 | 13TH MACHINING FIXTURE | 1 | |
| SAALC7744964 | 13TH MACHINING FIXTURE | 1 | |
| SK13157 | MACHINING FIXTURE FIGURE 904 | 1 | |
| SK13389 | MACHINING FIXTURE SHROUD COMPRESSOR APU | 1 | |
| lC6l93 | FIXTURE SET, MACHINING - FRONT COMPRESSOR STATOR | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
