| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 2C6367G01 | FIXTURE INSTALL | 10 | |
| 856A1833G01 | FIXTURE INSTALL | 4 | |
| 956A3077G02 | FIXTURE INSTALL | 1 | |
| 956A8675G02 | FIXTURE INSTALL | 6 | |
| HS8909 | FIXTURE INSTALL | 1 | |
| PWA111720 | FIXTURE INSTALL | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 9C1132G05 | FIXTURE - INSTALLATION/REMOVAL, LINE REPLACEABLE U | 1 | |
| (CALIB) 856A1833G01 | FIXTURE INSTALL (CALIBRATION) | 1 | |
| (CALIB) PWA111529 | FIXTURE, INSTALLATION (CALIBRATION) (CALIBRATION) | 1 | |
| -343 | FIXTURE - TRANSPORTATION, MAIN LANDING GEAR, REMOVAL/INSTALLATION | 8 | |
| 0061CF | AOA SENSOR INSTALL FIXTURE | 2 | |
| 100-47823 | STATIONARY SEAL INSTALLATION FIXTURE | 1 | |
| 10002684-S51-1 | FILLER PORT FILTER INSTALLATION FIXTURE | 1 | |
| 10002684-S91-1 | FILLER PORT FILTER INSTALLATION FIXTURE | 1 | |
| 109-3131-02-101 | TR BLADE BUSHING REMOVE/INSTALL FIXTURE - NEW BLADES | 1 | |
| 10C1039P01 | FIXTURE, INSTALLATION - OUTER COOLING AIR DUCT | 1 | |
| 10C1040G01 | FIXTURE, INSTALLATION - OUTER COOLING AIR DUCT RETAINING | 1 | |
| 10C1063G03 | FIXTURE, INSTALL/REMOVE - LPT NOZZLE | 1 | |
| 10C1075G02 | FIXTURE INSTALLATION RADIAL DRIVE SH | 1 | |
| 10C1107G01 | FIXTURE, INSTALL/REMOVE - LPT MODULE (INSTALL/REMOVE FIXTURE) | 1 | |
| 10C1120 | FIXTURE - INSTALL / REMOVE | 1 | |
| 10C1120G01 | FIXTURE, INSTALL/REMOVE - NO. 5 BEARING RETAINING NUT (INSTALL/REMOVE FIXTURE) (SUPERSEDED BY 10C1120G02) | 1 | |
| 10C1120G02 | FIXTURE, INSTALL/REMOVE - NO. 5 BEARING RETAINING NUT (INSTALL/REMOVE FIXTURE) (SUPERSEDES 10C1120G01) | 1 | |
| 10C1132P01 | FIXTURE, INSTALLATION - INNER COOLING AIR DUCT | 1 | |
| 10C1222G01 | FIXTURE, INSTALL/REMOVE - AIR/OIL SEPARATOR NUT | 1 | |
| 10C1250G01 | FIXTURE, INSTALL/INSPECT - HPT SHROUD SUPPORT | 1 | |
| 1106469 | PRESSURE SEAL INSTALLATION/ REMOVAL FIXTURE | 1 | |
| 11C3002 | FIXTURE - INSTALL/REMOVE-HPTR FOS | 1 | |
| 11C3006 | FIXTURE - INSTALL/REMOVE-HP TURB RTR INNER STG SEAL | 1 | |
| 11C3017 | FIXTURE - INSTALL/REMOVE-STG 2 AFT BLADE RETAINER | 1 | |
| 11C3022 | FIXTURE - INSTALL/REMOVE-DISK - HPT ROTOR - STAGE 2 | 1 | |
| 11C3033 | FIXTURE - INSTALL/REMOVE-COUPLING NUT - HPT RTR STG 2 | 1 | |
| 11C3050 | FIXTURE - ASSY-VERTICAL - REMOVE/INSTALL - COMBUSTOR | 1 | |
| 11C3068 | FIXTURE - INSTALL/REMOVE-SHANK NUT - HPTR STG 2 | 1 | |
| 11C3143 | FIXTURE, INSTALL-STG 1 HANGER/SUPPORT HPT STATOR CASE | 1 | |
| 11C3237 | FIXTURE - RESTRAIN - INSTALLATION OUTER GUIDE VANE | 1 | |
| 11C3262 | FIXTURE - INSTALL / REMOVE AGB MODUL | 1 | |
| 11C3262G04 | FIXTURE - REMOVAL/INSTALLATION, ACCESSORY GEARBOX (AGB) | 1 | |
| 11C3266 | FIXTURE - INSTALLATION HPT AIRDUCT/HPT DISK | 1 | |
| 11C3267 | FIXTURE, INSTALL/REMOVE-HEAT SHIELD, HP TURB ROTOR | 1 | |
| 11C3291 | FIXTURE - BUILDUP - LIFT & TURN - INSTALL-STG 2 HPT NOZ ASSY | 1 | |
| 11C3304 | FIXTURE - INSTALL-FWD RETAINER | 1 | |
| 11C3347G02 | FIXTURE, INSTALL/REMOVE - HPC ROTOR TUBE CARRIER | 1 | |
| 11C3353G03 | FIXTURE, INSTALL/REMOVAL - TUBE CARRIER RETAINING NUT - HPC ROTOR | 1 | |
| 11C3354 | FIXTURE - INSTALL/REMOVE - HPT INTERSTAGE SEAL | 1 | |
| 11C3411 | FIXTURE - INSTALL-CARBON SEAL - NO. 1 BRG | 1 | |
| 11C3421 | FIXTURE - INSTALL/REMOVE - FAN SHAFT COVER | 1 | |
| 11C3439 | FIXTURE - PROTECTOR/INSTALLATION-NOZZLE COVER - FWD OUTER SEAL | 1 | |
| 11C3550 | FIXTURE - HANDLING/INSTALLATION - NO. 5 BEARING HOUSING (HANDLING/INSTALLATION FIXTURE) | 1 | |
| 11C3599 | FIXTURE - INSTALLATION SUPPORT ASSY | 1 | |
| 11C4248G01 | HORIZONTAL DRIVE SHAFT REMOVE/INSTALL FIXTURE | 1 | |
| 11C4271 | FIXTURE - INSTALL/REMOVE - SHAFT MID FAN | 1 | |
| 11C4292 | FIXTURE - INSTALLATION-EXPANSION - NO 5 BRG CARBON SEAL | 1 | |
| 11C441 | FIXTURE INSTALL/REMOVE LRU | 1 | |
| 11C4412 | FIXTURE, INSTALL/REMOVE - LRU | 1 | |
| 11C4412G02 | FIXTURE, INSTALL/REMOVE - LINE REPLACEMENT | 1 | |
| 11C4412G04 | FIXTURE, INSTALL/REMOVE - LINE REPLACEABLE UNITS | 2 | |
| 11C4412G06 | FIXTURE-REMOVAL/INSTALLATION VFEG | 1 | |
| 11C4413 | FIXTURE, INSTALL/REMOVE - TRIM | 1 | |
| 11C4413G05 | FIXTURE, INSTALL/REMOVE - TRIM BALANCE CLIP - STAGE 7 LPT BLADE | 1 | |
| 11C4472 | FIXTURE - INSTALL/REMOVE-COOLER OIL-AIR COOLED | 1 | |
| 11C4472G01 | SPL-11575 - FIXTURE - REMOVE/INSTALL, AIR COOLED OIL COOLER | 1 | |
| 11C4472G02 | SPL-11575 - FIXTURE - REMOVE/INSTALL, AIR COOLED OIL COOLER | 1 | |
| 11C4538 | FIXTURE - INSTALL/REMOVE - EEC | 1 | |
| 11C4562 | FIXTURE - INSTALLATION - INTERSTAGE SEAL - HPTR | 1 | |
| 11C4609 | FIXTURE - INSTALL/REMOVE -TRIM BALANCE CLIP - STAGE 6 LPT BLADE | 1 | |
| 11C4609G04 | FIXTURE, INSTALL/REMOVE - TRIM BALANCE CLIP - STAGE 7 LPT BLADE | 1 | |
| 11C4641 | FIXTURE - INSTALL/REMOVE - FUEL SPLIT VALVE | 1 | |
| 11C4641G01 | FIXTURE - INSTALL/REMOVE - FUEL SPLIT VALVE | 2 | |
| 11C4649G01 | FIXTURE, INSTALL/REMOVE - EEC | 1 | |
| 11C4665 | FIXTURE - INSTALL/REMOVE-ACCESSORY GEARBOX MODULE | 1 | |
| 11C4689P01 | FIXTURE, INSTALLATION - HPC AFT STATOR WEAR GUIDE | 1 | |
| 11C4693 | INSTALL/REMOVE FIXTURE | 1 | |
| 11C4693G01 | INSTALL/REMOVE FIXTURE - MFOHX | 1 | |
| 11C4714 | FIXTURE, PRESS - INSTALLATION OUTER RETAINER, AIR ADAPTER | 1 | |
| 11C4803G01 | FIXTURE, INSTALL-HPCS DEFLECTOR | 1 | |
| 133-430025-7/952 | FLSC INSTALLATION TOOL (EJECTION SYSTEM HANDLING FIXTURE) | 1 | |
| 18C1034 | FIXTURE, INSTALL/REMOVE - | 1 | |
| 18C1075 | FIXTURE, INSTALL - STG. 1 & 2 RETAINER, HPTR | 1 | |
| 18C1078 | FIXTURE, TIE-ROD / INSTALLATION | 1 | |
| 18C1079 | FIXTURE, INSTALL - SHANK NUTS | 1 | |
| 18C1233 | FIXTURE, INSTALL - STG 1 HANGER/SUPPORT STATOR CASE - MANUAL | 1 | |
| 18C1416 | FIXTURE, INSTALL/REMOVE FWD./AFT SHAFT COVER | 1 | |
| 18C1568 | FIXTURE, INSTALL - AGB | 1 | |
| 18C1610 | FIXTURE, INSTALL/REMOVE-LINE REPLACEABLE UNITS | 1 | |
| 18C1633 | FIXTURE, REMOVE/INSTALL - LOWER FFD PANEL | 1 | |
| 1C6103 | FIXTURE, BLADE INSTALL/REMOVE - PT ROTOR | 1 | |
| 1C6872G01 | FIXTURE, INSTALLATION/REMOVAL, GEARBOX ASSY | 1 | |
| 1C6902 | FIXTURE, REMOVE/INSTALL - COMP | 1 | |
| 1C6902G01 | FIXTURE, REMOVE/INSTALL - COMP | 1 | |
| 1C6978 | FIXTURE, INSTALL. & REMOVAL, HORIZ. - PWR TURB. | 1 | |
| 1C6978 REV G | FIXTURE, INSTALL. & REMOVAL, HORIZ. - PWR TURB. | 1 | |
| 1C8134 | FIXTURE, INSTALL & REMOVE COMPR ROTOR HUB TIE | 1 | |
| 1C8305 | FIXTURE, INSTALL/REMOVE-POWER TURBINE, AFT SHAFT S | 1 | |
| 1C9318G01 | FIXTURE, INSTALL/REMOVE - RETAINER RING LPT/MID SHAFT | 1 | |
| 1C9319G01 | FIXTURE, INSTALL/REMOVE - NO. 6 BEARING PLUG | 1 | |
| 1C9336G01 | FIXTURE, ASSEMBLY, INSTALL / REMOVE - AFT DRIVE SHAFT NUT | 1 | |
| 1C9422 | FIXTURE - INSTALL/REMOVE CRF AFT CASE | 1 | |
| 1C9422G01 | FIXTUREINSTALLATION/REMOVAL CRF AFT CAS | 1 | |
| 1C9422G02 | Fixture, Installation/Removal - CRF Aft Case | 1 | |
| 1C9608 | FIXTURE, INSTALL/REMOVE - HP TURB MODULE ASSEMBLY | 1 | |
| 1C9608G01 | Fixture, Install-Remove - HP Turbine Module | 1 | |
| 1C9618G01 | Fixture, Install/Remove - Retainer Ring LPT/Mid-Shaft | 1 | |
| 1C9642 | FIXTURE - LIFT / INSTALL - SPACER SEAL AFT | 1 | |
| 1F10152 | Fixture, Remove/Install | 1 | |
| 1P16494 | FIXTURE, INSTALLATION | 1 | |
| 1X56131407 | FIXTURE SEAL INSTALLATION | 1 | |
| 1X56131407/PHP | FIXTURE SEAL INSTALLATION 1X56131407EQUAL | 1 | |
| 200-972-1 | FIXTURE INSTALLATION, ENGINE CONTROLS, QEC FIRE WALL | 1 | |
| 2024649-1 | Seal Installer Fixture | 1 | |
| 2024681-1 | Stud Installer Fixture | 1 | |
| 2025615-1 | STEM INSTALLATION FIXTURE | 1 | |
| 2227000F129 | RIVET INSTALLATION FIXTURE SPRIM DRUM | 1 | |
| 23051176 | 2 1/2 INNER RACE INSTALLATION FIXTURE | 2 | |
| 23055676 | Fixture – Inner Band, Installation 1st and 2nd Stage | 1 | |
| 23055677 | Fixture – Inner Band, Installation 3rd 4th and 5th Stage | 1 | |
| 2306-T003-401 | FIXTURE, INSTALLATION - SPRING | 1 | |
| 247C5020 | FIXTURE, INSTALL/REMOVE-MID SHAFT ASSEMBLY | 1 | |
| 247C5253 | FIXTURE - INSTALL/REMOVE | 1 | |
| 247C5253G01 | FIXTURE - INSTALL/REMOVE | 1 | |
| 247C5307 | FIXTURE, INSTALL SPRING ASSEMBLY | 1 | |
| 247C5361 | FIXTURE, INSTALL/REMOVE MID SHAFT ASSEMBLY | 1 | |
| 2550958 | FIXTURE, PIN, INSTALLATION & REMOVAL | 1 | |
| 2566442 | Seal Installation Fixture | 1 | |
| 2566501 | Plug Installation Fixture | 1 | |
| 2566800 | Bypass Valve Sleve Installation Fixture | 1 | |
| 2700187LAT1 | Pin Installation Fixture | 1 | |
| 274010TF1-1001 | TEST FIXTURE INSTALLATION KEY | 1 | |
| 274010TF1-101 | TEST FIXTURE INSTALLATION | 1 | |
| 291212-1 | FIXTURE ASSEMBLY VALVE INSTALLING | 1 | |
| 294882-1 | TURBINE MODULE HANDLING FIXTURE (TO INSTALL OR REMOVE 3801004-2 POWER SECTION FROM ENGINE ASSEMBLY) | 1 | |
| 295298-1 | Installing Fixture | 1 | |
| 296819-1 | FIXTURE ASSY,INSTALL,ANTI-ICE TUBE | 1 | |
| 298029-1 | GEARBOX HANDLING FIXTURE (TO HOLD GEARBOX STABLE FOR REMOVAL OR INSTALLATION) | 1 | |
| 298057-1 | GEARBOX HANDLING FIXTURE (TO HOLD GEARBOX STABLE FOR REMOVAL OR INSTALLATION) | 1 | |
| 2C14084G01 | FIXTURE, INSTALL/REM | 3 | |
| 2C14107 | FIXTURE, REMOVE/INSTALL ACCESS GEARBOX DRIVE SHAFT | 1 | |
| 2C14107 REV D | FIXTURE, REMOVE/INSTALL ACCESS. GEARBOX DRIVE SHAFT | 1 | |
| 2C14107G01 | FIXTURE, REMOVAL/INSTALL-AGB DRIVE SHAFT | 10 | |
| 2C14113G01 | FIXTURE, INSTALL AND REMOVE-COMP.ROTOR FWD. SHAFT SPLINE ADAPTER | 3 | |
| 2C14131G02 | FIXTURE, SEATING CHECK - HPTR (WITH FAN AND MID SHAFT INSTALL) | 4 | |
| 2C14137G01 | TOOL - FIXTURE, ACCESSORY GEAR BOX (AGB) MATING RING INSTALL | 11 | |
| 2C14137G02 | TOOL - FIXTURE, ACCESSORY GEAR BOX (AGB) MATING RING INSTALL | 7 | |
| 2C14199 | FIXTURE, INSTALL REMOVE-HP TURB MOD. ASSY | 1 | |
| 2C14199 REV V | FIXTURE, INSTALL REMOVE-HP TURB MOD. ASSY | 1 | |
| 2C14199G03 | FIXTURE, INSTALL/REMOVE HPT MODULE ASSEMBLY | 1 | |
| 2C14199G06 | FIXTURE, INSTALL/REM | 1 | |
| 2C14199G07 | FIXTURE INSTALLREMOVE HPT | 4 | |
| 2C14199G08 | FIXTURE, INSTALL/REM | 1 | |
| 2C14199G09 | FIXTURE, INSTALL/REMOVE - HPT MODULE (USE FOR PB) | 1 | |
| 2C14644 | FIXTURE, INSTALL/REMOVE ACCESS. GEARBOX MODULE | 1 | |
| 2C14644 REV K | FIXTURE, INSTALL/REMOVE ACCESS. GEARBOX MODULE | 1 | |
| 2C14644G02 | FIXTURE, INSTALL/REM | 1 | |
| 2C14644G03 | FIXTURE, INSTALL/REM | 1 | |
| 2C14661G01 | FIXTURE, INSTALL/REM | 2 | |
| 2C14661G02 | FIXTURE, INSTALLATION/ REMOVAL COMPRESSOR REAR FRAME ASSEMBLY ( INSTALLATION/ REMOVAL FIXTURE ) | 1 | |
| 2C14668G01TK | FIXTURE SET, INSTALLATION AND REMOVAL LPT NOZZLES STAGE 1 | 1 | |
| 2C14668G02 | FIXTURE SET, INSTALLATION AND REMOVAL - LPT NOZZLES STAGE 1 | 1 | |
| 2C14676G01 | FIXTURE, INSTALLATION / REMOVAL ‐ OUTER AIR TUBE, STAGE 1 NOZZLE | 1 | |
| 2C14691 | FIXTURE, INSTALL/REMOVE COMBUSTER | 1 | |
| 2C14691 REV C | FIXTURE, INSTALL/REMOVE COMBUSTER | 1 | |
| 2C14691G01 | FIXTURE, INSTALLREMOVE COMBUSTOR | 2 | |
| 2C14718G02 | FIXTURE, INSTALL/REM | 2 | |
| 2C14773 | FIXTURE, INSTALL/REMOVE - STG 1 FAN DISK NUTS | 1 | |
| 2C14773G03 | FIXTURE, INSTALL/REMOVE | 1 | |
| 2C14797 | FIXTURE, INSTALL-REMOVE-MAIN ENGINE FUEL CONTROL | 1 | |
| 2C14797 REV B | FIXTURE, INSTALL/REMOVE -MAIN ENG. FUEL CONTROL | 1 | |
| 2C14797G01 | FIXTURE INSTALL/REMOVE MAIN ENGINE | 2 | |
| 2C14824 | FIXTURE,INSTALL REMOVE-THRML SHLD HP TURB ROTOR DISK | 1 | |
| 2C14825G01 | FIXTURE, INSTALLATION AND REMOVAL - HPT | 1 | |
| 2C14825G03 | FIXTURE, INSTALLATION AND REMOVAL - HPT | 1 | |
| 2C14836 | FIXTURE, INSTALL/REMOVE | 1 | |
| 2C14836G01 | FIXTURE, INSTALL/REMOVE - STAGE 2 AFT BLADE RETAINER (INSTALL/REMOVE FIXTURE) | 1 | |
| 2C14836G02 | FIXTURE, INSTALL/REMOVE - STAGE 2 AFT BLADE RETAINER (INSTALL/REMOVE FIXTURE) | 1 | |
| 2C14846G01 | CENTERING FIXTURE - CVT REMOVAL/INSTALLATION | 1 | |
| 2C14852 | FIXTURE INSTALL-REMOVE-MAIN ENG FUEL CONTROL | 1 | |
| 2C14858G01TK | FIXTURE INSTALL-HIGH PRESS.COMPR.BUMPER BRG. | 1 | |
| 2C14858P02 | FIXTURE, INSTALLATION-HPC BUMPER | 1 | |
| 2C14871G01 | FIXTURE, INSTALL \ REMOVE-MANIFOLD NO 1 BEARING | 6 | |
| 2C14871G02 | FIXTURE,INSTALL/REMOVE-MANIFOLD N°1 BEARING | 2 | |
| 2C14871G03 | Fixture, Installation/Removal - Manifold No. 1 Bearing | 1 | |
| 2C18062G01 | FIXTURE, INSTALL/REMOVE - LPT MOD/FAN FWD SFT | 1 | |
| 2C6122 | FIXTURE, INSTALL & REMOVAL - BOLTS, FWD FAN SHAFT | 1 | |
| 2C6122 REV G | FIXTURE, INSTALL & REMOVAL - BOLTS, FWD FAN SHAFT | 1 | |
| 2C6122G02 | FIXTURE, INSTALL/REMOVE, BOLTS ‐ FORWARD FAN SHAFT | 1 | |
| 2C6122G03 | FIXTURE REMOVEL/INSTALL BOLTS FWD FAN SHAFT | 1 | |
| 2C6269 | FIXTURE INSTALL REMOVE-SPACER STAGE 1 FAN BLADE | 1 | |
| 2C6356 | FIXTURE, INSTALL - NO.4 BALL BEARING | 1 | |
| 2C6356G01 | FIXTURE/INSTALL NO.4 | 1 | |
| 2C6356G01 | FIXTURE, INSTALL-NO.4 BEARIG | 1 | |
| 2C6356G03 | INSTALLATION/REMOVAL FIXTURE | 1 | |
| 2C6557 | FIXTURE, INSTALL S2 | 1 | |
| 2C6588 | FIXTURE,INSTALL/REMOVE-C/R FOR | 1 | |
| 2C6588G01 | FIXTURE,INSTALL/REMOVE-C/R FOR | 1 | |
| 2C81012 | FIXTURE, INSTALL | 1 | |
| 2C81012G01 | FIXTURE, INSTALL SPIRAL RING | 1 | |
| 2C81013G01 | FIXTURE, AFT COUPLING NUT DRIVE SHAFT SPIRAL RING INSTALLATION (SPIRAL RING FIXTURE) | 1 | |
| 2C81016G01 | FIXTURE, INSTALL, SPIRAL RING | 1 | |
| 2C81220G01 | FIXTURE, INSTALLATION | 1 | |
| 2C81445G01 | FIXTURE, INSTALL/REMOVE | 1 | |
| 2C81452 | FIXTURE, INSTALL/REMOVE | 1 | |
| 2C81452G02 | FIXTURE, INSTALL/REMOVE STAGE 1 | 1 | |
| 2C81456G01 | FIXTURE, INSTALL/REMOVE SPACER | 1 | |
| 2C81461G01 | FIXTURE, INSTALL - RETAINING RING | 1 | |
| 2C81549G01 | FIXTURE, INSTALL NOZZLE (NOZZL | 1 | |
| 2C81560G01 | FIXTURE, INSTALL, NO. 4 NOZZLE | 1 | |
| 2C81608 | FIXTURE, INSTALL/REMOVE AGB - | 1 | |
| 2C81608G01 | FIXTURE, INSTALL/REMOVE AGB - | 1 | |
| 2C81945 | FIXTURE - INSTALL RING - MATING AXIS B | 1 | |
| 2C81945G01 | FIXTURE - INSTALL RING - MATING AXIS B | 2 | |
| 2C81969 | FIXTURE, INSTALL/REMOVE, STG 4 AIR CONDUITS | 1 | |
| 2C81969G01 | FIXTURE, INSTALL/REMOVE, STG 4 AIR CONDUITS | 1 | |
| 2C91367G01 | HPT STATOR INSTALLATION FIXTURE | 1 | |
| 2C91367G03 | FIXTURE, INSTALL - SHROUD RETAINERS | 1 | |
| 2C91380G01 | FIXTURE, INSTALL - TRANSFER TUBE | 1 | |
| 2CF65B80511 | FIXTURE - SPRING REMOVAL AND INSTALLATION, FORCE LIMITER, LATERAL CONTROL INPUT BUS | 1 | |
| 2MIT7001066-001 | BELT INSTALLATION FIXTURE | 1 | |
| 3400323-9 | FIXTURE INSTALLATION, ENGINE CONTROLS, QEC FIRE WALL | 1 | |
| 3791061-1 | FIXTURE MOUNT INSTALLATION | 1 | |
| 390700GSE1-1001 | ALIGNMENT FIXTURE, INSTALL TOOL | 7 | |
| 41937-T600 | INSTALLATION FIXTURE | 1 | |
| 41937T600 | INSTALLATION FIXTURE | 1 | |
| 5815A0000-01 | FIXTURE, RETAINING RING INSTALLATION | 1 | |
| 58T-108 | FIXTURE-BODY REMOVAL / INSTALLATION | 3 | |
| 5952435 | INSTALLATION, FIXTURE SLAT DRIVE | 1 | |
| 65885T2 | Bearing Installation Holding Fixture | 1 | |
| 6795872 | Installation Fixture | 4 | |
| 6796289 | INSTALLATION FIXTURE - REAR | 1 | |
| 6799596 | FIXTURE -INSTALLATION, SPEED SENSITIVE CONTROL SEAL | 2 | |
| 6872288 | FIXTURE - INSTALLATION AND REMOVAL, STARTER SHAFT SEAL | 1 | |
| 70030AF5 | SLEEVE INSTALLATION FIXTURE | 1 | |
| 71604 | Installing Fixture, Compensator Seat | 1 | |
| 7416680-1 | SLEEVE INSTALLATION FIXTURE | 1 | |
| 7C2247 | FIXTURE, INSTALL/REMOVE A SUMP FWD SPANNER NUT | 1 | |
| 7R1004 | (RT) FIXTURE, INSTALLATION - WEAR STRIP | 1 | |
| 8077C | CRANKSHAFT COUNTERWEIGHT BUSHING REMOVAL / INSTALLER FIXTURE | 1 | |
| 807801-S57-1 | OUTLET AND TOP COVER ASSEMBLY INSTALLATION FIXTURE | 1 | |
| 807801-S58-1 | OUTLET AND TOP COVER INSTALLATION FIXTURE | 1 | |
| 833184-1 | TUBE - INSTALLATION FIXTURE | 7 | |
| 833207 | FIXTURE BEARING INSTALLATION | 1 | |
| 833207-1 | FIXTURE-BEARING INSTALLATION | 2 | |
| 833207-1PM | FIXTURE-BEARING INSTALLATION | 1 | |
| 833288 | FIXTURE INSTALLER BUSHING | 1 | |
| 833430-1 | SUPPORT SHAFT INSTALLATION FIXTURE | 1 | |
| 833432-1 | COUPLING INSTALLATION FIXTURE | 1 | |
| 833582 | FIXTURE REMOVAL AND INSTALLATION | 1 | |
| 833667-1 | FIXTURE INSTALLATION AND REMOVAL SEAL | 1 | |
| 833667-2 | Seal Installation&Removal fixture | 1 | |
| 833671-1 | PIN INSTALLATION FIXTURE | 2 | |
| 833673-1 | PIN INSTALLATION FIXTURE | 1 | |
| 834235-1 | Pin Installation Fixture | 1 | |
| 834269-1 | Bearing Installer Fixture | 1 | |
| 834383-1 | Rotor Seal Installation Fixture | 1 | |
| 834435-1 | Pin Installation and Removal Fixture | 1 | |
| 834437-1 | SPRING INSTALLATION FIXTURE | 1 | |
| 834587 | FIXTURE INSTALLER BEARING | 2 | |
| 834587-1 | FIXTURE INSTALLER BEARING | 1 | |
| 834675-1 | COMPRESSOR ROTOR INSTALL FIXTURE | 1 | |
| 834695-1 | Bearing Installer Fixture | 1 | |
| 834739 | Fixture, Installation, Turbine Nozzle | 1 | |
| 834739-1 | FIXTURE, INSTALLATION, TURBINE NOZZLE | 1 | |
| 851-30486-506 | FIXTURE-BODY REMOVAL / INSTALLATION | 11 | |
| 856A 2384G01 | FIXTURE REMOVAL/INSTALLATION LPT. BLADES 1-5 | 1 | |
| 856A-2677-G01 | FIXTURE -REMOVAL AND INSTALLATION | 21 | |
| 856A1038 | FIXTURE, INSTALLATION - IGB BEARING AND SPACER | 1 | |
| 856A1038 G01 | Fixture Installation ‐ IGB Bearing & Spacer | 9 | |
| 856A1038G01 | Fixture, Installation - IGB Bearing and Spacer (installation fixture) | 9 | |
| 856A1099 | FIXTURE, INSTALLATION AND REMOVAL - HPT AFT OUTER AIR SEAL | 1 | |
| 856A1099 G01 | Fixture Install/Removal ‐ HPT Aft Outer Air Seal | 6 | |
| 856A1099G01 | FIXTURE INSTALL/REMOVAL HPT AFT OUTER AIR SEAL | 6 | |
| 856A1099P01 | FIXTURE, INSTALL/REMOVAL - HPT AFT OUTER AIR SEAL (INSTALL/REMOVAL FIXTURE) | 1 | |
| 856A1111G01 | FIXTURE, INSTALL - NO. 4 BEARING OUTER RACE | 3 | |
| 856A1120G05 | FIXTURE INSTALL AND REMOVE IGB MODULE | 2 | |
| 856A1143 | FIXTURE, INSTALLATION - LP NOZZLE RETAINING RING | 1 | |
| 856A1143G02 | FIXTURE, INSTALLATION - OUTER | 8 | |
| 856A1143G03 | FIXTURE, INSTALLATION - OUTER COOLING | 1 | |
| 856A1145 | FIXTURE, INSTALLATION - OUTER COOLING AIR DUCT | 1 | |
| 856A1145 P02 | Fixture Installation - Outer Cooling Air Duct | 3 | |
| 856A1145 P03 | Fixture Installation - Outer Cooling Air Duct | 9 | |
| 856A1145P01 | Install Fixture | 1 | |
| 856A1145P02 | FIXTURE, INSTALLATION - OUTER COOLING AIR DUCT | 3 | |
| 856A1145P03 | FIXTURE, INSTALLATION - OUTER COOLING AIR DUCT | 9 | |
| 856A1146 | FIXTURE, INSTALLATION - INNER COOLING AIR DUCT | 1 | |
| 856A1146 P02 | Fixture Installation - Inner Cooling Air Duct | 8 | |
| 856A1146P02 | Fixture, Installation - Inner Cooling Air Duct (installation fixture) | 8 | |
| 856A1290G01 | FIXTURE, INSTALL AND REMOVE | 7 | |
| 856A1291 | FIXTURE, INSTALL & REMOVE - INLET GEAR - BOX MODULE | 1 | |
| 856A1291 G05 | FIXTURE, INSTALL & REMOVE - INLET GEARBOX MODULE | 1 | |
| 856A1291 G06 | Fixture Install and Remove ‐ Inlet Gearbox | 3 | |
| 856A1291G01 | FIXTURE, INSTALL & REMOVE - INLET GEAR - BOX MODULE | 1 | |
| 856A1291G02 | FIXTURE, INSTALL & REMOVE - INLET GEAR - BOX MODULE | 1 | |
| 856A1291G03 | FIXTURE, INSTALL & REMOVE - INLET GEAR - BOX MODULE | 1 | |
| 856A1291G04 | FIXTURE, INSTALL & REMOVE - INLET GEAR - BOX MODULE | 1 | |
| 856A1291G05 | FIXTURE, INSTALL & REMOVE - INLET GEARBOX MODULE | 1 | |
| 856A1291G06 | FIXTURE INSTALL AND REMOVE-I | 3 | |
| 856A1291G07 | FIXTURE, INSTALL & REMOVE - INLET GEAR - BOX MODULE | 1 | |
| 856A1291G08 | FIXTURE, INSTALL AND REMOVE-INLET GEARBOX MODULE | 8 | |
| 856A1291G09 | FIXTURE, INSTALL AND REMOVE - INLET GEARBOX MODULE (INSTALL AND REMOVE FIXTURE) | 4 | |
| 856A1291G10 | FIXTURE, INSTALL | 7 | |
| 856A1291G35 | FIXTURE, INSTALL AND REMOVE - INLET GEARBOX MODULE | 1 | |
| 856A1291P35 | FIXTURE, INSTALL AND REMOVE - INLET GEARBOX MODULE | 3 | |
| 856A1356G02 | INSTALLATION N4 BEARING FIXTURE | 5 | |
| 856A1358 | FIXTURE, REMOVE/INSTALL PART | 2 | |
| 856A1358 G01 | Fixture Install/Remove ‐ Module 12 | 1 | |
| 856A1358G01 | Fixture, Install / Remove | 1 | |
| 856A1358G02 | FIXTURE, INSTALL/REMOVE-MODULE 12 | 7 | |
| 856A1374 | FIXTURE, INSTALL/REMOVE - AIR SEAL IGB (FIXTURE) | 1 | |
| 856A1374G02 | FIXTURE, INSTALL/REMOVE - AIR SEAL IGB (FIXTURE) | 2 | |
| 856A1377 | FIXTURE INSTALLATION INNER COOLING AIR DUCT | 1 | |
| 856A1377G02 | FIXTURE INSTALLATION INNER COOLING AIR DUCT | 10 | |
| 856A1387G01 | FIXTURE, INSTALL/REMOVE | 3 | |
| 856A1389 | INSTALLATION FIXTURE | 1 | |
| 856A1389G01 | FIXTURE INSTALL-N4 BRG OUTER | 8 | |
| 856A1390G01 | FIXTURE, INSTALL - RETAINING CLIP, HPT SHROUD | 1 | |
| 856A1431G03 | FIIXTURE, RESTRAINING-HPT NOZZLE ASSEMB(THE RESTRAIN FIXTURE IS USED TO RESTRAIN THE NOZZLE SEGMENTS OF THE HP TURBINE NOZZLE ASSEMBLY CIRCUMFERENTIALLY DURING THE INSTALLATION OR REMOVAL FROM THE COMPRESSOR REAR FRAME (CRF) | 7 | |
| 856A1490 | FIXTURE, INSTALL/REMOVE MODULE 10 | 1 | |
| 856A1490G01 | FIXTURE, INSTALL/REMOVE MODULE 10 | 1 | |
| 856A1490G02 | FIXTURE, INSTALL/ REMOVE - MODULE 12 (INSTALL/REMOVE FIXTURE) | 1 | |
| 856A1490G04 | FIXTURE, INSTALL/REMOVE | 3 | |
| 856A1490G05 | FIXTURE, INSTALL/REMOVE MOD 12 FOR - | 6 | |
| 856A1501001 | FIXTURE. INSTALL AND REMOVE- IGB RETAINER PINS | 1 | |
| 856A1501G01 | Fixture, Install and Remove - IGB Retainer Pins | 4 | |
| 856A1503G01 | FIXTURE, INSTALL/REMOVE | 1 | |
| 856A1603 | FIXTURE INSTALL/REMOVE HPTR FW | 1 | |
| 856A1603G03 | FIXTURE, INSTALL/REMOVE - HPT ROTOR FWD OUTER SEAL | 3 | |
| 856A1603G05 | FIXTURE. INSTALLFREMOVE - HPTR FORWARD OUTER SEAL (INSTALL/REMOVAL FIXTURE) (SB 72-0643) | 2 | |
| 856A1603G08 | FIXTURE INSTALL/REMOVE - HPT ROTOR FWD OUTER SEAL | 3 | |
| 856A1619G01 | FIXTURE, LIFT-FIXT, INSTALL/REMOVE | 6 | |
| 856A1621G01 | Fixture, Lift - Fixture Install/Remove, HP Turbine Rotor Forward Outer Seal (lift fixture) | 3 | |
| 856A1826G01 | Fixture, Install/Remove - No. 3 Stationary Air Seal (fixture) | 3 | |
| 856A1833G01 | FIXTURE,INSTALL - RETAINING CLIP, HPT | 4 | |
| 856A1845G01 | FIXTURE, ALIGNING- HIGH PRESSURE COMPRESSOR TO HOLD HP COMPRESSOR VANE SECTOR WHILE INSTALLING AND REMOVING SEALS | 3 | |
| 856A1868 | FIXTURE - INSTALL/REMOVE | 1 | |
| 856A1868G01 | Fixture Install/Remove - HPTR Forward Outer Seal | 4 | |
| 856A1868G02 | FIXTURE, INSTALL/REMOVE-HP TURB ROTOR FWD OUTER SEAL | 1 | |
| 856A1868G03 | FIXTURE, INSTALL/ REMOVE-HP TURB | 3 | |
| 856A2215G01 | FIXTURE, INSTALL - NO. 4 BRG OUTER RACE (INSTALLATION FIXTURE) | 1 | |
| 856A2308G02 | FIXTURE, INSTALL/REMOVE | 9 | |
| 856A2310G02 | FIXTURE, INSTALL - RESTRAINING CLIP | 10 | |
| 856A2316G01 | FIXTURE, INSTALL/REMOVAL | 13 | |
| 856A2379G01 | FIXTURE, INSTALL/REMOVE | 5 | |
| 856A2384G01 | FIXTURE, REMOVAL/INSTALLATION - LPT BLADES STAGES 1 AND 5 (REMOVAL/INSTALLATION FIXTURE | 1 | |
| 856A2618G04 | FIXTURE, INSTALL AND REMOVE - INLET GEARBOX MODULE | 11 | |
| 856A2655 | FIXTURE, INSTALL/REMOVE RADIAL DRIVE SHAFT HSGS. | 1 | |
| 856A2655 G01 | Fixture Install/Remove ‐ Radial Drive Shaft Housing | 1 | |
| 856A2655 REV A | FIXTURE, INSTALL/REMOVE RADIAL DRIVE SHAFT HSGS. | 1 | |
| 856A2655G01 | FIXTURE INSTALL/REMOVE | 1 | |
| 856A2655G02 | FIXTURE, INSTALL/REMOVE - RADIAL DRIVE SHAFT HOUSINGS (FIXTURE) | 1 | |
| 856A2655G03 | Fixture, Install/Remove - Radial Drive Shaft Housings (fixture) | 5 | |
| 856A2677 | FIXTURE INSTALLATION AND REMOVAL | 2 | |
| 856A2677G01 | REMOVAL/INSTALL FIXTURE | 21 | |
| 856A2677G01 | FIXTURE - REMOVAL AND INSTALLATION, REMOVABLE RETAINING RING | 21 | |
| 856A2694G01 | FIXTURE, INSTALLFREMOVE - RADIAL DRIVE SHAFT HOUSINGS (FIXTURE) | 4 | |
| 856A2705G01 | FIXTURE, REMOVAL/INSTALLATION AND HANDLING - BOOSTER ROTOR/STATOR ASSEMBLY | 1 | |
| 856A2705G02 | FIXTURE, REMOVAL/INSTALLATION AND HANDLING - BOOSTER ROTOR/STATOR ASSEMBLY | 3 | |
| 856A2705G03 | FIXTURE, REMOVAL/INSTALLATION AND HANDLING - BOOSTER ROTOR/STATOR ASSEMBLY | 4 | |
| 856A2719 | FIXTURE, SUPPORT - REMOVE/INSTALL TGB (SUPPORT FIXTURE) | 5 | |
| 856A2719G01 | FIXTURE, SUPPORT - REMOVE/INSTALL TGB (SUPPORT FIXTURE) | 3 | |
| 856A2719G02 | FIXTURE, SUPPORT - REMOVE/INSTALL TGB (SUPPORT FIXTURE) | 8 | |
| 856A2719G03 | FIXTURE, SUPPORT - REMOVEJ INSTALLTGB (SUPPORT FIXTURE) | 12 | |
| 856A2778G01 | FIXTURE, INSTALLATION SHIELD LPT | 5 | |
| 856A2873G01 | INSTALLATION FIXTURE - OIL | 2 | |
| 856A3358 | #4 BEARING INSTALLATION/REMOVAL FIXTURE | 1 | |
| 856A3358G03 | HOLDING FIXTURE NO 4 BEARING - INSTALL | 2 | |
| 856A3429G01 | FIXTURE, INSTALLATION SHIELD LPT | 2 | |
| 856A3503 G01 | Fixture Removal/Installation and Handling | 3 | |
| 856A3503 G02 | Fixture Removal/Installation and Handling | 5 | |
| 856A3503G01 | FIXTURE REMOVAL/ INSTALLATION AND HANDLING | 3 | |
| 856A3503G02 | BOOSTER REMOVAL/INSTALLATION FIXTURE. | 5 | |
| 856A3722 | FIXTURE, INSTALLATION - NO. 1 BEARING SUPPORT (INSTALLATION FIXTURE) | 1 | |
| 856A3722G01 | Fixture Install #1-2 Bearing Support | 1 | |
| 856A3722G02 | FIXTURE, INSTALLATION - NO. 1 BEARING SUPPORT (INSTALLATION FIXTURE) | 1 | |
| 856A3722G04 | Fixture, Installation - No. 1 Bearing Support (installation fixture) | 8 | |
| 856A3739 | INSTALLATION FIXTURE - OIL NOZZLE N 2 BRG | 1 | |
| 856A3739G01 | Fixture Install Oil Nozzle Bearing 2 | 1 | |
| 856A3739G02 | Fixture, Installation - No. 2 Bearing Oil Nozzle (installation fixture) | 3 | |
| 856A3756 | FIXTURE, INSTALL LPT STG2 | 1 | |
| 856A3756G01 | Fixture Install LPT Stage 2 Shield | 5 | |
| 856A3756G02 | SHIELD INSTALLING FIXTURE – LPT STG 2 | 5 | |
| 856A3757 | FIXTURE, INSTALLATION SHIELD STG 1 | 1 | |
| 856A3757002 | FIXTURE INSTALLATION - SHIELD, STAGE 3 (FIXTURE) | 1 | |
| 856A3757G01 | Fixture, Install LPT Stage 3 Shield | 1 | |
| 856A3757G02 | SHIELD INSTALLING FIXTURE – LPT STG 3 | 5 | |
| 856A3757G03 | SHIELD INSTALLING FIXTURE – LPT STG 3 | 4 | |
| 856A3763G03 | FIXTURE, INSTALLATION - SHIELD, STAGE 3 | 6 | |
| 881700AT1 | PIN INSTALLATION FIXTURE | 1 | |
| 8C2018 | FIXTURE, INSTALL/ REMOVE STG 2 AFT BLADE RETAINER | 1 | |
| 8C2067 | FIXTURE, INSTALLATION - #4 BEARING CARBON SEAL | 1 | |
| 8C2070 | FIXTURE, GUIDE TUBE - TCF, HORIZONTAL INSTALL | 1 | |
| 8C2097 | FIXTURE - VISUAL ALIGNMENT - HPT INSTALL | 1 | |
| 8C2162 | FIXTURE, INSTALL – STATOR WEAR GUIDES | 1 | |
| 8C2176 | FIXTURE - INSTALL - EXTENSION CASE MID FLANGE BOLTS (FOR PRODUCTION ONLY) | 1 | |
| 8C2198 | FIXTURE, INSTALL/REMOVE - HPCS BUSHINGS | 1 | |
| 8C2459 | FIXTURE, INSTALL/REMOVE-SHAFT COVER, FWD | 1 | |
| 8C2580 | INSTALL/REMOVE ACCESSORY MODULE FIXTURE | 1 | |
| 8C2583 | FIXTURE, BUILD & INSTALL/REMOVE - ACCESSORY GEARBOX | 1 | |
| 8C2591 | FIXTURE - LIFT/INSTALLATION � AGB (VERTICAL) | 1 | |
| 8C2615 | FIXTURE, INSTALL/REMOVE-FAN BLADE | 1 | |
| 8C2666 | FIXTURE, INSTALL/REMOVE-LINE REPLACEABLE UNITS | 1 | |
| 8C2666G01 | FIXTURE INSTALLATIO N/REMOVAL | 1 | |
| 8C2666G02 | FIXTURE - INSTALLATION/REMOVA,L LINE REPLACEABLE UNITS WITH MAX LOAD CAPACITY OF 400IB | 1 | |
| 8C2724 | FIXTURE, INSTALL - STG 1 AND 2 HANGER/SUPPORT STATOR CASE | 1 | |
| 8C2730 | FIXTURE, LIFT & INSTALL - STG 2 HPT NOZZLE ASSY | 1 | |
| 8C2736 | FIXTURE, INSTALLATION - HPT AIR DUCT / HPT ROTOR (STARTER LONG VERSION) | 1 | |
| 8C2769 | FIXTURE - INDIVIDUAL INSTALL - STG 1 AND 2 HANGER / SUPPORT STATOR CASE | 1 | |
| 8C2836 | FIXTURE - INSTALL - HPCR NUTS | 1 | |
| 8C2895 | FIXTURE, INSTALL - FUEL PUMP, MFF ADAPTER | 1 | |
| 8C2896 | FIXTURE - INSTALL / REMOVE - FUEL PUMP VERTICAL | 1 | |
| 8C2897 | FIXTURE - INSTALL / REMOVE - FMU VERTICAL | 1 | |
| 8C2898 | FIXTURE - INSTALL / REMOVE - LUBE UNIT VERTICAL | 1 | |
| 8C2899 | FIXTURE - LIFT / INSTALL - STARTER VERTICAL | 1 | |
| 8C2915 | FIXTURE - INSTALL - FWD INNER RACE - NO 2 BRG | 1 | |
| 8C2921 | FIXTURE - INSTALL - ACCELEROMETER - NO 1 BRG | 1 | |
| 8C3115 | FIXTURE - HANDLING - INSTALLATION - NO 5 BRG HSG ASSY | 1 | |
| 905680-1-1 | Pin Installation fixture (2 IT) | 1 | |
| 905680-2-1 | Pin Installation fixture | 1 | |
| 9481M77 | FIXTURE, LIFT/INSTALL-STG 9/10 OGV | 1 | |
| 956A1012 | FIXTURE - INSTALL/REMOVE - COUPLING NUT - HPT ROTOR | 1 | |
| 956A1064 | FIXTURE - INSTALL - STATIONARY OIL SEAL - FWD | 1 | |
| 956A1065 | FIXTURE - INSTALL - CARBON SEAL - NO 4 | 1 | |
| 956A1066 | FIXTURE - INSTALL - NO. 4 BEARING OUTER RACE | 1 | |
| 956A1070 | FIXTURE - INSTALL - BLADE RETAINER - STAGE 1 | 1 | |
| 956A1070G01 | Fixture,install-blade retainer,stage 1 | 1 | |
| 956A1088 | FIXTURE - INSTALLATION & ALIGNMENT - BRG SUPPORT HSG | 1 | |
| 956A1089 | FIXTURE - INSTALL - RETAINING PIN - SERVICES TUBE NUTS | 1 | |
| 956A1089G02 | FIXTURE, INSTALL, RETAINING PI | 1 | |
| 956A1114 | FIXTURE - TORQUE ADAPTER TO INSTALL/REMOVE TUBE IMPELLER | 1 | |
| 956A1115 | FIXTURE - REMOVAL/INSTALLATION RETAINING NUT | 1 | |
| 956A1177 | FIXTURE - INSTALL HPC AFT STATOR WEAR GUIDE | 1 | |
| 956A1182 | FIXTURE - INSTALL - STG 4 HPCS DEFLECTOR | 1 | |
| 956A1211 | FIXTURE - INSTALLATION HPT AIR DUCT / HPT ROTOR | 1 | |
| 956A1215 | FIXTURE - INSTALL - STG 1 HANGER/SUPPORT STATOR CASE | 1 | |
| 956A1216 | FIXTURE - BUILDUP - LIFT & INSTALL STG 2 HPT NOZZLE ASSY | 1 | |
| 956A1276 | FIXTURE - LIFT - VERTICAL CORE ASSEMBLY - HPTR INSTALLED | 1 | |
| 956A1277 | FIXTURE - INSTALL - STG 1 HANGER - SUPPORT STATOR CASE | 1 | |
| 956A1282 | FIXTURE - INSTALL/REMOVE- SHANK NUT - CDP STATOR SEAL | 1 | |
| 956A1520 | ASSEMBLY ALIGNING FIXTURE - INSTALL - RETAINING PINS | 1 | |
| 956A1525 | FIXTURE - INSTALL - BOLTS - SELF RETAINING - IGB | 1 | |
| 956A1727 | FIXTURE - INSTALLATION - HPT FWD OUTER SEAL | 1 | |
| 956A1736 | FIXTURE - INSTALLATION-HPT FWD OUTER SEAL | 1 | |
| 956A1738 | FIXTURE - INSTALL/REMOVE- SHANK NUT - HPTR STG 2 | 1 | |
| 956A1739G01 | FIXTURE, INSTALLATION | 1 | |
| 956A1740G01 | FIXTURE, INSTALLATION | 1 | |
| 956A1816 | FIXTURE - INSTALL/REMOVE-HPT ROTOR - FWD SEAL | 1 | |
| 956A3005 | FIXTURE - INSTALL/REMOVE - STG 2 AFT BLADE RETAINER | 1 | |
| 956A3006 | FIXTURE - INSTALL/ REMOVE-HPTR MIDSEAL | 1 | |
| 956A3010 | FIXTURE - INSTALL/REMOVE - DISK - HPTR - STG 2 | 1 | |
| 956A3012 | FIXTURE - INSTALL/REMOVE-COUPLING NUT -HPT RTR STG 2 | 1 | |
| 956A3022 | FIXTURE - INSTALL/REMOVE- HPT ROTOR - FWD SEAL | 1 | |
| 956A3047 | FIXTURE - INSTALL/REMOVE - STG 1 BLADES - HPTR | 1 | |
| 956A3070 | FIXTURE - INSTALLATION - HPT STG1 AFT RETAINER | 1 | |
| 956A3073 | FIXTURE - INSTALL/REMOVE- SHANK NUT - B-SUMP & TCF | 1 | |
| 956A3077 | FIXTURE - INSTALL - RETAINING WIRE - SERVICE TUBE NUTS | 1 | |
| 956A3094 | FIXTURE - INSTALL / REMOVE - CARBON SEAL. NO. 4 | 1 | |
| 956A3096 | FIXTURE - INSTALL - CARBON SEAL - NO 4 | 1 | |
| 956A3114 | FIXTURE - TORQUE ADAPTER TO INSTALL/REMOVE TUBE IMPELL | 1 | |
| 956A3211 | FIXTURE - INSTALLATION HPT AIR DUCT / HPT ROTOR (FOR PRODUCTION ONLY) | 1 | |
| 956A3215 | FIXTUREM INSTALL - STG 1 HANGER/SUPPORT HPT STATOR CASE | 1 | |
| 956A3216 | FIXTURE - BUILDUP - LIFT & INSTALL STG 2 HPT NOZZLE ASSY | 1 | |
| 956A3254 | FIXTURE - BUILDUP - LIFT & INSTALL STG 2 HPT NOZ ASSY | 1 | |
| 956A3277 | FIXTURE - INSTALL - STG 1 HANGER - SUPPORT STATOR CASE | 1 | |
| 956A3400 | FIXTURE - INSTALL-RETAINING WIRE - SERVICE TUBE NUTS | 1 | |
| 956A3401 | FIXTURE - INSTALLATION - RETAINING RING - NO 4 BEARING SPANNER NUT | 1 | |
| 956A3727 | FIXTURE - INSTALLATION - HPT FWD OUTER SEAL | 1 | |
| 956A3728 | FIXTURE - INSTALLATION - HPT STG1 RETAINER & MIDSEAL | 1 | |
| 956A6021 | FIXTURE, INSTALL - TGB PISTON RING | 1 | |
| 956A6021G01 | FIXTURE, REMOVE/INSTALL TGB PISTON RING | 1 | |
| 956A6084 | FIXTURE - GUIDE INSTALLATION - FAN CASE | 1 | |
| 956A6105 | FIXTURE - INSTALL - RDE RING | 1 | |
| 956A6126 | FIXTURE - INSTALL - BELT LOCATION OGV | 1 | |
| 956A6144 | FIXTURE - INSTALL - INNER RDS | 1 | |
| 956A6145 | FIXTURE - INSTALL - OGV CUP | 1 | |
| 956A6145G01 | FIXTURE, INSTALL - OGV CUP | 1 | |
| 956A6145G02 | FIXTURE, INSTALL -OGV CUP | 5 | |
| 956A6145G03 | FIXTURE, INSTALL - OGV CUP | 1 | |
| 956A6154 | FIXTURE - INSTALL REAR SEAL SUPPORT - VBV DOOR | 1 | |
| 956A6161 | FIXTURE - INSTALL & CHECK - VBV DOOR | 1 | |
| 956A6312 | FIXTURE - INSTALLATION GUIDE - LPT REAR FRAME | 1 | |
| 956A6351 | FIXTURE - INSTALL - SLAVE - NO.5 BEARING | 1 | |
| 956A6355 | FIXTURE - INSTALLATION GUIDE - LPT SHAFT | 1 | |
| 956A6526 | FIXTURE - INSTALLATION AND REMOVAL - RETAINING RING | 1 | |
| 956A6603 | FIXTURE -INSTALL - ACCESSORY GEARBOX | 1 | |
| 956A6637G02 | FIXTURE, REMOVAL/INSTALLATION FAN SPINNER | 3 | |
| 956A6653 | FIXTURE - INSTALL-FRONT VENT TUBE | 1 | |
| 956A6678G02 | FIXTURE, REMOVAL/INSTALLATION | 1 | |
| 956A6803 | FIXTURE, INSTALL/REMOVE-SUPPORT BEARING 2 | 1 | |
| 956A6805 | FIXTURE FOR SUPPORT BEARING 1 INSTALLATION | 1 | |
| 956A6847 | FIXTURE - INSTALL/REMOVE BEARING SUPPORT 1/2 | 1 | |
| 956A7001 | FIXTURE - LIFT - INSTALL/REMOVE - FAIRING - FLOW PATH | 1 | |
| 956A7014 | FIXTURE - REMOVAL/INSTALL-PANEL FLOW PATH | 1 | |
| 956A7014G01 | FIXTURE, REMOVE/INSTALL - PANEL FLOW PATH | 4 | |
| 956A7015 | FIXTURE - REMOVAL/INSTALL-SPLITTER FAIRING | 1 | |
| 956A7015G01 | FIXTURE, REMOVE/INSTALL - SPLITTER FAIRING | 3 | |
| 956A7018 | FIXTURE, REMOVE/INSTALL - ACCESSORY GEARBOX | 1 | |
| 956A7018G02 | FIXTURE, REMOVE/ INSTALL - AGB 1 | 4 | |
| 956A7606 | FIXTURE - INSTALL/REMOVE - TGB SLIDE | 2 | |
| 956A7606G01 | FIXTURE, REMOVE/INSTALL - TGB SLIDE | 1 | |
| 956A7606G02 | FIXTURE, INSTALL/REMOVE | 1 | |
| 956A7606G02? | FIXTURE, REMOVE/INSTALL - TGB SLIDE | 1 | |
| 956A7617 | FIXTURE - REMOVAL/INSTALL - FRONT SPINNER | 1 | |
| 956A7617G02 | FIXTURE, REMOVAL/INSTALL - FRONT SPINNER | 5 | |
| 956A7617G03 | FIXTURE, REMOVAL/INSTALL - FRONT SPINNER | 1 | |
| 956A7618 | FIXTURE - REMOVE /INSTALL - LUBRICATION UNIT | 1 | |
| 956A7618G02 | FIXTURE, REMOVE /INSTALL - LUBRICATION UNIT | 4 | |
| 956A7625 | FIXTURE, INSTALL - FRONT CENTEREING/INSTALL LPT | 1 | |
| 956A7630 | FIXTURE - INSTALL - RING RETAINER - LPT NUT | 1 | |
| 956A7632 | FIXTURE - INSTALL - RING RETAINER TGB SHAFT | 1 | |
| 956A7632G01 | FIXTURE, INSTALL - RING RETAIN | 5 | |
| 956A7648 | FIXTURE - INSTALL - REAR COVER | 1 | |
| 956A8026 | FIXTURE - INSTALL - VANE OUTLET GUIDE | 1 | |
| 956A8034 | FIXTURE - LIFT - INSTALL - FAIRING - FLOW PATH | 1 | |
| 956A8043 | FIXTURE - INSTALL - INNER RADIAL SHAFT | 1 | |
| 956A8043G01 | FIXTURE, INSTALL - OUTER RADIAL SHAFT | 1 | |
| 956A8054 | FIXTURE - INSTALL - SHROUD - FAN FRAME | 1 | |
| 956A8056 | FIXTURE - INSTALL - SHROUD - FAN FRAME | 1 | |
| 956A8074 | FIXTURE - REMOVE/INSTALL - PANEL FLOW PATH | 1 | |
| 956A8074G01 | FIXTURE, REMOVE/INSTALL - PANEL FLOW PATH | 2 | |
| 956A8076 | FIXTURE - REMOVE/INSTALL - TGB ASSEMBLY | 1 | |
| 956A8076G02 | FIXTURE, REMOVE/INSTALL - TGB ASSEMBLY | 3 | |
| 956A8102 | FIXTURE - INSTALL - REMOVE - SLEEVE - RADIAL SHAFT | 1 | |
| 956A8104 | FIXTURE - INSTALL - N1 SENSOR BOLT | 1 | |
| 956A8151 | FIXTURE - INSTALL - SEAL | 1 | |
| 956A8170 | FIXTURE - INSTALL - OGV CUPS | 1 | |
| 956A8402 | FIXTURE - INSTALL/REMOVE - RING - SEAL-REAR ENCLOSURE | 1 | |
| 956A8403 | FIXTURE - INSTALL/REMOVE - RING - SEAL | 1 | |
| 956A8430 | FIXTURE - INSTALL - BOLT D - RETAINING RING | 1 | |
| 956A8431 | FIXTURE - INSTALL TURBINE WHEELS | 1 | |
| 956A8439 | FIXTURE - INSTALL - SHROUD - LPT STG 1 TO 4 - SEGMENT | 1 | |
| 956A8441 | FIXTURE - INSTALL - PLATE INSULATION - STG 2 | 1 | |
| 956A8446 | FIXTURE - INSTALL - PLATE INSULATION - STG 3 | 1 | |
| 956A8495 | FIXTURE - INSTALL - NO.5 BEARING SQUEEZE FILM | 1 | |
| 956A8601 | FIXTURE - INSTALL/REMOVE TRV | 1 | |
| 956A8601G01 | TRV INSTALL AND REMOVE FIXTURE | 1 | |
| 956A8622G01 | LPT REAR CASE ASSY REMOVE AND INSTALL FIXTURE | 1 | |
| 956A8631 | FIXTURE - INSTALL/REMOVE - LPT NUT - RETAINING RING | 1 | |
| 956A8635 | FIXTURE - INSTALL - LPT BALANCING CLIP | 1 | |
| 956A8635G01 | FIXTURE - INSTALLATION, LPT BALANCING CLIP | 1 | |
| 956A8635G02 | FIXTURE - INSTALLATION, LPT BALANCING CLIP | 1 | |
| 956A8641 | FIXTURE - LIFT - FRONT CENTERING/INSTALL LPT | 1 | |
| 956A8650G01 | FIXTURE - TGB REMOVAL/INSTALL | 1 | |
| 956A8651 | FIXTURE - INSTALL/REMOVE-FRONT CENTER VENT TUBE | 1 | |
| 956A8663 | FIXTURE - LIFT - INSTALL -LPT REAR FRAME ASSY | 1 | |
| 956A8670 | FIXTURE - REMOVAL/INSTALL - FRONT SPINNER | 1 | |
| 956A8670G01 | FIXTURE, REMOVAL/INSTALL - FRONT SPINNER | 3 | |
| 956A8670G02 | FIXTURE, REMOVAL/INSTALL FRONT SPINNER | 4 | |
| 956A8675 | FIXTURE - INSTALL - PLATFORM FRONT SHROUD | 1 | |
| 956A8675G01 | FIXTURE, INSTALL | 2 | |
| 956A8675G02 | FIXTURE, INSTALL - PLATFORM FRONT SHROUD | 6 | |
| 956A8675G03 | Fixture, Install - Platform Front Shroud | 3 | |
| 956A8675G04 | FIXTURE, INSTALL - PLATFORM FRONT SHROUD | 1 | |
| 956A8675G05 | FIXTURE, INSTALL - PLATFORM FRONT SHROUD | 1 | |
| 956A8684G01 | TGB NUT RETAINER INSTALL FIXTURE | 4 | |
| 956A8685 | FIXTURE - REMOVE/INSTALL - TGB SLIDE | 1 | |
| 956A8685G02 | FIXTURE - TGB SLIDE REMOVAL AND INSTALLATION | 4 | |
| 956A8685G03 | TGB SLIDE REMOVE/INSTALL FIXTURE | 1 | |
| 956A8686 | FIXTURE - INSTALL - TRANSFER SHAFT NUT RETAINER | 1 | |
| 956A8686G01 | FIXTURE, INSTALL - TRANSFER SHAFT NUT RETAINER | 3 | |
| 956A8694 | FIXTURE - INSTALL - FRONT CENTERING/INSTALL LPT | 1 | |
| 956A8803 | FIXTURE - INSTALL/REMOVE- SUPPORT BEARING 2 | 1 | |
| 956A8805 | FIXTURE - INSTALL/REMOVE- SUPPORT BEARING 1 | 1 | |
| 956L6600G01 | FIXTURE, INSTALL - FUEL TUBE | 1 | |
| 98S71003000002 | FIXTURE ENGINE - PROPELLER REMOVAL AND INSTALLATION | 10 | |
| 98S71003000230 | AXLE PIN FOR ENG /PROP REMOVAL INSTALLATION FIXTURE | 1 | |
| 9C1017 | FIXTURE REMOVE/INSTALL | 1 | |
| 9C1017G01 | FIXTURE, REMOVE/INSTALL - VARIABLE CENTER OF GRAVITY | 1 | |
| 9C1017G02 | FIXTURE, REMOVE/INSTALL - VARIABLE CENTER OF GRAVITY | 1 | |
| 9C1035 | FIXTURE - INSTALL - STG 1 HANGE | 1 | |
| 9C1050G01 | FIXTURE, REMOVE/INSTALL - VARIABLE CENTER OF GRAVITY (CG BAR) | 1 | |
| 9C1127 | FIXTURE INSTALL/REMOVE | 1 | |
| 9C1132 | FIXTURE INSTALL/REMOVE - LINE REPLACEABLE UNITS | 1 | |
| 9C1132G03 | SPL-331 FIXTURE - INSTALLATION/REMOVAL, LINE REPLACEABLE UNITS 777-300ER | 3 | |
| 9C1132G04 | FIXTURE - INSTALLATION/REMOVAL, LINE REPLACEABLE UNITS WITH MAX LOAD CAPACITY OF 100LB | 1 | |
| 9C1132G05 | FIXTURE - INSTALLATION/REMOVAL, LINE REPLACEABLE U | 1 | |
| 9C1132G05 8 | FIXTURE INSTALL / REMOVE LINE REPLACEABLE UNITS | 1 | |
| 9C1132G06 | FIXTURE - INSTALLATION/REMOVAL, LINE REPLACEABLE U | 3 | |
| 9C1172G03 | FIXTURE,INSTALL/REMOVE-ACCESSORY GEARBOX MODULE | 1 | |
| 9C1294 | FIXTURE INSTALLATION | 1 | |
| 9C1310 | FIXTURE, INSTALL/REMOVE STAGE | 1 | |
| 9C1361 | FIXTURE, INSTALL/REMOVE FAN | 1 | |
| 9C1361G01 | FIXTURE, REMOVAL/INSTALLATION SPINNER, FAN ROTOR (FIXTURE) | 1 | |
| 9C1499 | FIXTURE, INSTALLATION HPT AIR DUCT/HPT ROTOR DISK | 1 | |
| 9C1864 | FIXTURE INSTALLATION SUPPORT ASSY | 1 | |
| 9C2340 | INSTALLATION FIXTURE | 1 | |
| 9C3024 | FIXTURE, BUILD, LIFT & INSTALL-HPT NOZ ASSY | 1 | |
| 9C3036G01 | FIXTURE - REMOVAL/INSTALLATION, FAN ROTOR SPINNER | 2 | |
| 9C3036G02 | Fixture - Removal/Installation, Fan Rotor Spinner | 1 | |
| 9C3049 | FIXTURE, INSTALL GUIDE FAN HUB ASSY | 1 | |
| 9C3144 | FIXTURE, INSTALLATION ASSEMBLY FAN STATOR | 1 | |
| 9C3144G01 | FIXTURE INSTALLATION ASSEMBLE FAN STATOR | 1 | |
| 9C3185 | FIXTURE, INSTALL/REMOVE - COUPLING NUT, HPT RTR STG 2 | 1 | |
| 9C3190 | UNISON RING BUSHING REMOVAL/INSTALLATION FIXTURE | 1 | |
| 9C3403 | FIXTURE, INSTALL/REMOVE - LINE REPLACEABLE UNITS | 1 | |
| A-11711-1B | Tube Installation Fixture with Arbor | 1 | |
| A11006 | HOLDING FIXTURE (FOR INSTALLATION THE NUT) | 3 | |
| A27029-28 | REMOVAL/INSTALLATION FIXTURE - LOAD LIMITER AILERON CONTROL SPRING | 1 | |
| AGE13314 | LEFT - RIGHT INTEGRATED CONTROL INSTALLATION FIXTURE | 2 | |
| AGE13314A | LEFT - RIGHT INTEGRATED CONTROL INSTALLATION FIXTURE | 1 | |
| AGE13316 | EICC INSTALLATION FIXTURE | 3 | |
| AGE13320 | INSTALLATION FIXTURE ASSY. ATF BATTERY | 5 | |
| AGE13322 | lOG INSTALLATION FIXTURE ASSY. | 6 | |
| AGE13628 | WAVY WASHER INSTALLATION FIXTURE | 2 | |
| AGE13628PM | WAVE RING INSTALLATION FIXTURE | 1 | |
| AGE14041 | GP2700 INSTALLATION FIXTURE ASSY | 1 | |
| AGE17633 | FIXTURE, HOLDING, BEARING LINER INSTALL | 1 | |
| AGE17639 | Fixture, Holding Bearing Liner Install | 1 | |
| AGE19074 | SPRING INSTALL FIXTURE | 1 | |
| AGE21060 | FIXTURE, INSTALLA-TION-LICC/RICC | 1 | |
| AT-71603 | Installing Fixture, Elevator Compensator Seat | 1 | |
| AT-71604 | Installation Fixture, Compensator Seat | 1 | |
| AT65-44835 | BEARING ASSEMBLY FIXTURE - INSTALLING BEARINGS FOR INPUT SHAFT ASSEMBLY AT65-44835 | 1 | |
| AT65-44835PM | BEARING ASSEMBLY FIXTURE - INSTALLING BEARINGS FOR INPUT SHAFT ASSEMBLY AT65-44835 | 1 | |
| B27024-1 | REMOVAL/INSTALLATION FIXTURE - NEUTRAL SHIFT ROD SPRING | 1 | |
| B27053-1 | FIXTURE - SPRING INSTALLATION AND REMOVAL, RUDDER NEUTRAL SHIFT ROD | 2 | |
| BFG179-236 | FIXTURE BEARING CUP RENOVAL-INSTALLATION | 1 | |
| C32034 | FIXTURE - TRANSPORTATION, MAIN LANDING GEAR, REMOVAL/INSTALLATION | 2 | |
| C32034 -339 | FIXTURE - TRANSPORTATION, MAIN LANDING GEAR, REMOVAL/INSTALLATION | 11 | |
| C32034-211 | REMOVAL / INSTALLATION FIXTURE-MLG | 4 | |
| C32034-211 | FIXTURE-TRANSPORTATION MLG REMOVE/INSTALLATION EQPT | 4 | |
| C32034-227 | SPL-1869 Fixture - Transportation, Main Landing Gear, Removal/Installation | 11 | |
| C32034-273 | FIXTURE - TRANSPORT, MLG, REMOVAL/INSTALLATION | 6 | |
| C32034-33 | FIXTURE – TRANSPORTATION, MAIN LANDING GEAR, REMOVAL/INSTALLATION | 1 | |
| C32034-339 | FIXTURE - TRANSPORTATION, MAIN LANDING GEAR, REMOVAL/INSTALLATION | 11 | |
| C32034-343 | FIXTURE - TRANSPORTATION, MAIN LANDING GEAR, REMOVAL/INSTALLATION | 7 | |
| C32034-9 | FIXTURE, MAIN LANDING GEAR, INSTALLATION AND REMOVAL | 10 | |
| CF65B61160 | CHECKING FIXTURE - CARGO BAGGAGE RETRACTABLE GUIDE RAIL INSTALLATION | 1 | |
| CF65B62206-9 | CHECKING FIXTURE - CAM FOLLOWER INSTALLATION | 1 | |
| D-15518-2 | Spring Pin Installation Fixture | 1 | |
| DZZ7273-1 | APU INSTALLATION FIXTURE | 1 | |
| DZZ7311-1 | Fixture-pylon installation | 1 | |
| E13651 | BODY AND AMPLIFIER INSTALLATION FIXTURE | 1 | |
| F72851 | FIXTURE ASSEMBLY -0 INBOARD WING FLAP TO INSTALL | 1 | |
| F80-0-50921-3 | INSTALLATION FIXTURE | 1 | |
| F80166-1 | FIXTURE, TEST - PRESSURE RELIEF, FLAME ARRESTOR SURGE TANK (REQUIRED IF FLAME ARRESTOR IS INSTALLED) (THE BOEING COMPANY) | 26 | |
| FDS-41331 | FIXTURE (BEARING INSTALLATION) (2IT) | 1 | |
| FXT-14374 | INSTALLATION TOOL HOLDING FIXTURE | 1 | |
| G0100348 | MD-11 APU REMOVAL / INSTALL FIXTURE | 1 | |
| G601R324001-1 | Dolly And Fixture - Wheels And Brakes. Removal/ Installation | 2 | |
| G700-343201 | Fixture - H.U.D.S Bracket Installation | 1 | |
| G700-343201-1 | FIXTURE - H.U.D.S BRACKET INSTALLATION | 1 | |
| G700-343201-85 | FIXTURE, H.U.D.S BRACKET INSTALLATION | 1 | |
| GS14687-1 | FIXTURE, SWITCH INSTALLATION | 1 | |
| GS20690-1 | INSTALLING FIXTURE | 1 | |
| GS21969-1 | INSTALLATION FIXTURE | 1 | |
| GS21982-1 | FIXTURE, INSTALLATION | 1 | |
| GS22275-1 | IDLER INPUT GEAR CUP INSTALLING FIXTURE | 1 | |
| GS22312-1 | RIGHT HAND IDLER GEAR CUP INSTALLING FIXTURE | 1 | |
| GS22932-1 | INSTALLATION FIXTURE | 1 | |
| IAE 1P16046 | REMOVAL/INSTALLATION FIXTURE | 3 | |
| IAE 1P16067 | INSTALL AND REMOVE FIXTURE | 1 | |
| IAE 1P16122 | INSTALLATION FIXTURE | 1 | |
| IAE 1P16495 | IAE 1P16495 INSTALLATION FIXTURE | 1 | |
| IAE 1P16543 | IAE 1P16543 REMOVAL/INSTALLATION FIXTURE | 1 | |
| IAE1F10073 | FIXTURE, REMOVE/INSTALL | 1 | |
| IAE1F10111 | FIXTURE, INSTALL./REMOVAL | 1 | |
| IAE1F10152 | IAE 1F10152 REMOVAL/INSTALLATION FIXTURE | 1 | |
| IAE1F10261 | FIXTURE, REMOVE/INSTALL. | 1 | |
| IAE1P16010 | FIXTURE, INSTALL/REMOVE | 1 | |
| IAE1P16046 | FIXTURE REMOV INSTALL ENGINE ASSY HPT | 3 | |
| IAE1P16058 | REMOVE/INSTALL JAWS FIXTURE | 2 | |
| IAE1P16077 | FIXTURE, INSTALL/REMOVE | 1 | |
| IAE1P16122 | FIXTURE, INSTALL | 1 | |
| IAE1P16124 | FIXTURE, INSTALL | 2 | |
| IAE1P16384 | FIXTURE REMOVE/INSTALL | 1 | |
| IAE1P16543 | REMOVAL/INSTALLATION FIXTURE | 1 | |
| IAE1P17750 | FIXTURE, INSTALL/REMOVE LHT Dwg No.(537250203) | 1 | |
| K-2733-02 | ADAPTER (NLG INSTALLATION FIXTURE) | 3 | |
| K-2734-02 | ADAPTER (MLG INSTALLATION FIXTURE) | 5 | |
| K32044-1 | TEST SUPPORT FIXTURE, TIRE PRESSURE SENSOR (TPS) INSTALLATION | 4 | |
| K55006-73 | TORQUE FIXTURE - VERTICAL FIN TENSION BOLT REMOVAL/INSTALLATION | 9 | |
| LTCT14491-01 | Fixture, Carrier Assembly, Shaft Removal/Installation | 1 | |
| MIT161U1000-991 | 747, MAIN GEAR SENSOR INSTALL & TEST FIXTURE | 1 | |
| MIT65B82106 | SPRING INSTALLATION AND REMOVAL FIXTURE - LOAD LIMITER, AILERON CONTROL | 1 | |
| OUT75 | FIXTURE-BODY REMOVAL / INSTALLATION | 7 | |
| P35 | FIXTURE, INSTALL AND REMOVE - INLET GEARBOX MODULE (INSTALL AND REMOVE FIXTURE) | 1 | |
| PME65-45888-51 | INSTALLATION FIXTURE FORWARD AIRSTAIRS | 1 | |
| PME65B89802 | 5TH ENGINE STRUT INSTALLATION FIXTURE (RB211-524) | 1 | |
| PWA 111529 | INSTALLATION FIXTURE | 5 | |
| PWA 80262 | FIXTURE, REMOVE/INSTALL | 1 | |
| PWA 85520 | FIXTURE, INSTALL AND REMOVE | 1 | |
| PWA 85749 | FIXTURE, INSTALL AND REMOVE CONNECTOR | 2 | |
| PWA 85769 | FIXTURE, INSTALL/REMOVE | 1 | |
| PWA-115396 | VFG REMOVAL/INSTALLATION LIFT FIXTURES (VFG) | 1 | |
| PWA109641 | FIXTURE, INSTALL, TRIM BALANCE WEIGHT | 1 | |
| PWA111515 | FIXTURE, INSTALLATION | 1 | |
| PWA111529 | FIXTURE, INSTALLATION - ENGINE ASSY, FAN | 5 | |
| PWA111529 | FIXTURE, INSTALLATION | 5 | |
| PWA111707 | FIXTURE INSTALLATION | 1 | |
| PWA115244 | FIXTURE, INSTALLATION - ENG | 2 | |
| PWA115396 | VFG REMOVAL/INSTALL SUPPORT FIXTURE | 1 | |
| PWA211308 | FIXTURE, INSTALLATION | 1 | |
| PWA211312 | INSTALLATION FIXTURE | 1 | |
| PWA211313 | FIXTURE INSTALLATION (NEO) | 2 | |
| PWA80262 | FIXTURE,REMOVE/INSTALL | 1 | |
| PWA81311 | FIXTURE INSTALLATION LOWER TOWER SHAFT | 1 | |
| PWA87360 | FIXTURE, INSTALL/REMOVE | 4 | |
| PWC46345 | INSTALLATION FIXTURE | 1 | |
| PWC48032 | INSTALLATION FIXTURE | 1 | |
| PWC86227 | FIXTURE IBR FAN INSTALL AND REMOVAL | 1 | |
| RBE1X56-131-407 | Tool, Fixture, Seal Installation | 2 | |
| RSE1022 | FIXTURE - PRIMARY NOZZLE INSTALLATION | 2 | |
| RSE1022 REV A | FIXTURE - PRIMARY NOZZLE INSTALLATION | 1 | |
| RSE1040 | FIXTURE, PRIMARY NOZZLE INSTALLATION | 1 | |
| RSE1040 REV NC | FIXTURE, PRIMARY NOZZLE INSTALLATION | 1 | |
| RSE1080 | FIXTURE - PRIMARY NOZZLE INSTALLATION | 4 | |
| RSE1080 REV A | FIXTURE - PRIMARY NOZZLE INSTALLATION | 1 | |
| RSE1129 | Fixture Centre Body Installation | 5 | |
| RSEI022 | FIXTURE - PRIMARY NOZZLE INSTALLATION | 1 | |
| RSEI040 | FIXTURE, PRIMARY NOZZLE INSTALLATION | 1 | |
| RSEI080 | FIXTURE - PRIMARY NOZZLE INSTALLATION | 1 | |
| SBDP96-04-1IF | INSTALLATION FIXTURE | 1 | |
| SPL-15094 | FIXTURE, INSTALL - OGV CUP | 1 | |
| SPL-1869 | FIXTURE, MAIN LANDING GEAR, INSTALLATION AND REMOVAL | 1 | |
| ST-93 | FIXTURE ASSEMBLY COUNTER WEIGHT BUSH INSTALLATION | 1 | |
| STC32749 | APU INSTALLATION FIXTURE | 1 | |
| T-00883-1 | PIN INSTALLING AND CRIMPING FIXTURE | 1 | |
| T-66639 | Assembly Fixture,Pin Installation | 1 | |
| T-66639PM | ASSEMBLY FIXTURE,PIN INSTALLATION | 1 | |
| T7-032586 | FIXTURE (INSTALL ACSR) | 1 | |
| T81450 | PIN INSTALLING FIXTURE, | 1 | |
| T89264 | Rivet Installation Fixture | 1 | |
| TES-3772 | SHAFT SEAL INSTALLING FIXTURE | 1 | |
| TES-3775 | BEARING INSTALLING FIXTURE | 1 | |
| TM0856G001 | INSTALLATION FIXTURE | 2 | |
| VM0-29 | INSTALLATION FIXTURE | 1 | |
| VM0-36 | INSTALLATION FIXTURE | 1 | |
| VM0-51 | INSTALLATION FIXTURE | 1 | |
| lC6978 | FIXTURE, INSTALL. & REMOVAL, HORIZ. - PWR TURB. | 1 | |
| 956A8675G02 | FIXTURE INSTALL-PLATFORM FRONT SHROUD | 6 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
