| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| GS19621-1 | FIXTURE HEAT | 2 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 11C3021 | FIXTURE - HEAT- HP TURBINE ROTO | 1 | |
| 11C3021G02 | FIXTURE HEAT - HPT ROTOR, STG 1 DISK | 1 | |
| 11C3267 | FIXTURE, INSTALL/REMOVE-HEAT SHIELD, HP TURB ROTOR | 1 | |
| 11C4254 | FIXTURE - CAL-ROD HEATER-NO 1 BRG HOUSING | 1 | |
| 11C4254G01 | FIXTURE, CAL-ROD HEATER - NO. 1 BEARING HOUSING (208-240 VAC, 50-60 HZ) | 1 | |
| 11C4517 | FIXTURE - REMOVE - HEAT SHIELD HP TURB ROTOR | 1 | |
| 11C4599G01 | FIXTURE, HEAT GUN - NO. 2 BEARING HOUSING | 1 | |
| 11C4624 | FIXTURE - HEAT GUN - IGB (EUROPEAN) | 1 | |
| 11C4693G01 | FIXTURE, INSTALL/REMOVE - MAIN FUEL OIL HEAT EXCHANGER | 1 | |
| 1C6185 | FIXTURE,HEAT-TREAT- CRF | 1 | |
| 1C6185G01 | FIXTURE,HEAT-TREAT- CRF | 1 | |
| 2558133 | HEATING FIXTURE | 1 | |
| 2558368 | HEATING FIXTURE, WHEEL HUB (240V, 4500 WATTS) | 1 | |
| 2558450 | HEAT FIXTURE WHEEL HUB | 1 | |
| 2558500 | HEATING FIXTURE, WHEEL HUB (240 VOLTS, 3,000 WATTS) | 1 | |
| 2558544 | HEATING FIXTURE | 2 | |
| 2558677 | HEATING FIXTURE | 1 | |
| 2558722 | HEATING FIXTURE | 1 | |
| 2558739 | HEATING FIXTURE WHEEL HUB | 1 | |
| 2558804 | wheel hub heating fixture | 1 | |
| 2558873 | heating fixture | 1 | |
| 2C15007G01 | FIXTURE, HEAT-TREAT DOME | 1 | |
| 2C15008G01 | FIXTURE, HEAT TREAT, COMBUSTOR LINERS (HEAT TREAT FIXTURE) | 1 | |
| 2C15623G01 | FIXTURE, HEAT-TREAT INNER LINER | 1 | |
| 2C6565 | FIXTURE,HEAT-TREAT-STATIONARY | 1 | |
| 2C6565G01 | FIXTURE,HEAT-TREAT-STATIONARY | 1 | |
| 2C6576 | FIXTURE,HEAT-TREAT-HPTR PRESSU | 1 | |
| 2C6576G01 | FIXTURE,HEAT-TREAT-HPTR PRESSU | 1 | |
| 2C7107 | FIXTURE,HEAT-TREAT-CDP STATION | 1 | |
| 2C7107G01 | FIXTURE,HEAT-TREAT-CDP STATION | 1 | |
| 2C7111 | FIXTURE,HEAT-TREAT-CDP STATION | 1 | |
| 2C7111G01 | FIXTURE,HEAT-TREAT-CDP STATION | 1 | |
| 2C7268 | FIXTURE, HEAT TREAT | 1 | |
| 2C7268G01 | FIXTURE, HEAT TREAT | 1 | |
| 2C7331 | FIXTURE,HEAT-TREAT-COMBUSTOR D | 1 | |
| 2C7331G01 | FIXTURE,HEAT-TREAT-COMBUSTOR D | 1 | |
| 2C7336 | FIXTURE,HEAT-TREAT-INNER COMBU | 1 | |
| 2C7336G01 | FIXTURE,HEAT-TREAT-INNER COMBU | 1 | |
| 2C7406 | FIXTURE SET,HEAT TREAT AND WEL | 1 | |
| 2C7406G01 | FIXTURE SET,HEAT TREAT AND WEL | 1 | |
| 2C7457 | FIXTURE, HEAT TREAT | 1 | |
| 2C7457G01 | FIXTURE, HEAT TREAT | 1 | |
| 2C7787G01 | FIXTURE SET, HEAT | 1 | |
| 35-92065-0003 | FIXTURE, AIR HEATER | 1 | |
| 558-1-13430 | HEATSINK FIXTURE | 1 | |
| 558-1-13510 | FIXTURE-HEATSINK | 1 | |
| 6799649 | FIXTURE, HEAT TREAT, RTBS | 3 | |
| 6877016 | PURGING AND HEAT SINK FIXTURE | 1 | |
| 6877017 | PURGING AND HEAT SINK FIXTURE | 1 | |
| 7C2205 | FIXTURE, HEATER-NO 4 BEARING | 1 | |
| 800C172100 | HEAT TREATMENT FIXTURE | 1 | |
| 800C172200 | HEAT TREATMENT FIXTURE | 1 | |
| 800C172300 | HEAT TREATMENT FIXTURE | 1 | |
| 800C172400 | HEAT TREATMENT FIXTURE | 1 | |
| 856A1219G02 | FIXTURE HEATER HPT | 4 | |
| 856A1219G05 | FIXTURE, HEATER - HPT AFT SHAFT | 2 | |
| 856A1502G01 | FIXTURE, LOCATOR - HPT SHROUD HEAT | 2 | |
| 856A1508 | FIXTURE,HEATER-HP TURB,AFT SHAF | 1 | |
| 856A1508G01 | HEATER FIXTURE AFT SHAFT | 1 | |
| 856A1508G02 | FIXTURE, HEATER-HP TURB, AFT SHAFT | 2 | |
| 856A1889G01 | FIXTURE, HEATER-HP TURB, AFT SHAFT (208-240V,50-60 HZ) | 6 | |
| 856A4015G02 | HEAT TREAT FIXTURE | 3 | |
| 856A4019G02 | Heat Treat Fixture | 1 | |
| 856A4019G03 | HEAT TREAT FIXTURE | 1 | |
| 856A4024G01 | Heat Treat Fixture | 1 | |
| 856A4025G01 | Heat Treat Fixture | 1 | |
| 856A4075G01 | Heat Treat Fixture | 1 | |
| 856A4203G01 | FIXTURE, HEAT TREAT – COMBUSTOR INNER LINER | 1 | |
| 856A4207G01 | FIXTURE, HEAT TREAT – COMBUSTOR OUTER LINER | 1 | |
| 856A6759G02 | FIXTURE, RESTRAINING TURBINE FRAME HEAT TREATMENT | 1 | |
| 8C2092 | FIXTURE, REMOVE - AFT HEAT SHIELD, HPTR | 1 | |
| 8C2280 | FIXTURE - HEATING - OUTER RACE - NO 4 BRG | 1 | |
| 8C2532 | FIXTURE, HEAT GUN - NO. 2 BEARING HOUSING | 1 | |
| 8C2561 | FIXTURE, HEAT GUN - IGB | 1 | |
| 8C2822 | FIXTURE - HEATER - CDP DISK | 1 | |
| 9481M70G03 | FIXTURE, HEAT COMPR ROTOR STG 5 BLISK | 1 | |
| 956A1206 | FIXTURE - REMOVE - CDN AFT HEAT SHIELD | 1 | |
| 956A1500 | FIXTURE - HEATING IGB (230V) | 1 | |
| 956A3500 | FIXTURE - HEATING-INLET GEARBOX | 1 | |
| 956A3810 | FIXTURE - RESTRAINING - HEAT SHIELD - TCF CASE | 1 | |
| 956A6559 | FIXTURE - HEATER - NO.5 BEARING FERRULE | 1 | |
| 956A6561 | FIXTURE - HEATER - NO.5 BEARING SQUEEZE FILM | 1 | |
| 956A6572 | FIXTURE - HEATER - NO.5 BEARING OUTER RACE | 1 | |
| 956A6604 | FIXTURE - HEATER - REAR SEAL NO.5 BEARING | 1 | |
| AA1522 | Fixture, Alignment Brake Heat Packs | 1 | |
| AGE15162 | LIFTING FIXTURE - COMPONENTS, QUAD HEAT EXCHANGER | 1 | |
| AGE16392 | HOLDING FIXTURE, PRIMARY HEAT EXCHANGER | 1 | |
| AGE16393 | ALIGNMENT FIXTURE, QUAD HEAT EXCHANGER | 1 | |
| AGE16393A | ALIGNMENT FIXTURE, QUAD HEAT EXCHANGER | 1 | |
| AGE16393B | ALIGNMENT FIXTURE, QUAD HEAT EXCHANGER | 1 | |
| G116-00-0132 | MACHINE FIXTURE (HEAT SHIELD) | 1 | |
| G117-00-1313 | HEAT SHIELD WELD FIXTURE | 1 | |
| GS14023-1 | FIXTURE, HEAT SO | 1 | |
| GS14147-1 | FIXTURE, HEAT | 2 | |
| GS15428-1 | HEAT SETTING FIXTURE | 1 | |
| GS15429-1 | FIXTURE HEAT SETTINGS | 1 | |
| GS19621-1 | Heat Set Fixture | 2 | |
| GS19623-1 | FIXTURE, HEAT AND BOND | 2 | |
| GS19624-1 | FIXTURE, HEAT AND BOND | 1 | |
| GS20438-1 | FIXTURE, SHEATH BONDING | 1 | |
| GS204381 | FIXTURE, SHEATH BONDING | 1 | |
| GS20438M1 | SHEATH BONDING FIXTURE | 1 | |
| GS21911-1 | HEAT SOAK FIXTURE | 2 | |
| GS21912-1 | HEAT SOAK FIXTURE | 2 | |
| GS21913-1 | HEAT SOAK FIXTURE | 2 | |
| GS24675-1 | FIXTURE, HEAT SOAK | 2 | |
| GS24675-1 | HEAT SOAK FIXTURE (2 IT) | 2 | |
| GS24675-2 | HEAT SOAK FIXTURE | 1 | |
| GS24954-1 | LIFTING FIXTURE - COMPONENTS, QUAD HEAT EXCHANGER | 1 | |
| GS25308-1 | HEAT SET FIXTURE | 1 | |
| IAE1M14061 | FIXTURE, HEATING | 1 | |
| IAE1M14074 | CARRIER FIXTURE HEATING LPT TURBINE STG 3,4,5,6,7 | 1 | |
| K21031-1 | FIXTURE, ALIGNMENT - QUAD HEAT EXCHANGER | 2 | |
| K21031-3 | Alignment Fixture, Quad Heat Exchanger | 3 | |
| LMT | HEAT TREAT FIXTURE, BASE | 1 | |
| LMT 00274 | DOME HEAT TREAT FIXTURE | 1 | |
| LMT 00275 | DOME HEAT TREAT HOLD-DOWN FIXTURE | 1 | |
| LMT 00313 | OUTER LINER HEAT TREAT HOLD-DOWN FIXTURE | 1 | |
| LMT 00314 | INNER LINER HEAT TREAT HOLD-DOWN FIXTURE | 1 | |
| LMT FIG 904 | HEAT TREAT HOLD DOWN FIXTURE | 1 | |
| LTCT11528-01 | Fixture, Heat-Treat, Combustor Housing | 1 | |
| PWA111969 | FIXTURE HEATING | 1 | |
| PWA46156 | FIXTURE, WELD/HEATTREAT #4 BRG HSG, HEATSHLD & ELBOW | 1 | |
| PWA46156 REV A | FIXTURE, WELD/HEATTREAT #4 BRG HSG, HEATSHLD & ELBOW | 1 | |
| PWC65773 | Heating /Lifting Fixture | 1 | |
| SK13336 | HEAT TREAT FIXTURE, CVT | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
