| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| PWC38151 | Fixture GE | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 98S71003000002 | FIXTURE ENG/PROP R/I -PERFORM MAGNETIC PARTICLE INSPECTION OF STRUCTURAL COMPONENTS, WELDING JOINTS, CLAMPING PINS, SHACKLES, AND PINS OF THE EQUIPMENT -PERFORM LOAD TESTS, CERTIFICATION OF ALL TOOL PINS, CHANGE OF WHEELS TO THE PACKAGING BOXES -ISSUE A | 1 | |
| (CALIB) GS25565-1 | TEST FIXTURE ASSY, LOW-STAGE BLEED CHECK-VALVE (CALIBRATION) | 1 | |
| -343 | FIXTURE - TRANSPORTATION, MAIN LANDING GEAR, REMOVAL/INSTALLATION | 8 | |
| 0061R50003 | HINGE ASSEMBLY PIN PRESS FIXTURE | 1 | |
| 067-00-0431 | FLANGE SEALING SURFACE LOCATION FIXTURE | 1 | |
| 0S22465 | REFRIGERATION UNIT, FIXTURE | 1 | |
| 100-47813 | GEAR LOCK FIXTURE, PRESSURE TEST | 1 | |
| 100-47827 | GEAR MOTOR TORQUING FIXTURE | 1 | |
| 100-48576 | SUPPORT FIXTURE, GEAR MOTOR | 1 | |
| 10C1001 | FIXTURE - LIFT-ADJUSTABLE CG GENERAL PURPOSE | 1 | |
| 10C1001G04 | FIXTURE, LIFT - ADJUSTABLE CG, GENERAL PURPOSE (LIFT FIXTURE) (RECOMMENDED) | 1 | |
| 10C1102G01 | FIXTURE, BUILDUP - CORE MODULE (GENSPEC) (CORE BUILDUP FIXTURE) | 1 | |
| 10C1103G01 | FIXTURE, CLAMPING - NO. 3 BEARING ASSEMBLY, INLET GEARBOX (CLAMPING FIXTURE) | 1 | |
| 10C1113 | FIXTURE REMOVE SPACERSTAGE 1 FAN BLADE HYDRAULIC | 1 | |
| 10C1113G01 | FIXTURE REMOVE-SPACERSTAGE 1 FAN BLADE, HYDRAULIC REMOVE FIXTURE) | 2 | |
| 10C1155G02 | FIXTURE, SEATING CHECK - CORE MODULE TO INLET GEAR BOX (SEATING CHECK FIXTURE) (RECOMMENDED) | 1 | |
| 10C1169G01 | FIXTURE, ASSEMBLY/DISASSEMBLY - HPT NOZZLE, STAGE 1 (FIXTURE) (SUPERSEDED BY 10C1169G02) | 1 | |
| 10C1169G02 | FIXTURE, ASSEMBLY/DISASSEMBLY - HPT NOZZLE STAGE 1 (FIXTURE) (SUPERSEDES 10C1169G01) | 1 | |
| 10C1221P02 | FIXTURE, NUT RUNNER - COMPRESSOR ROTOR AFT FLANGE (NUT RUNNER FIXTURE) | 1 | |
| 10C1253 | FIXTURE, PULLER-AGB SCAVANGE S | 1 | |
| 10C1253G01 | FIXTURE, PULLER- AGB SCAVANGE SCREENS | 3 | |
| 1106629-1 | MAGNET CHARGER FIXTURE | 1 | |
| 11C3001G07 | FIXTURE - FAN CASE SHROUD MACHINING, GENX-2B | 1 | |
| 11C3004P02 | FIXTURE, SHIPPING - FAN STATOR CASE MODULE, GENX-1B/2B | 1 | |
| 11C3007 | FIXTURE - GRIND-STAGES 1 & 2 HPT SHROUDS | 1 | |
| 11C3009 | FIXTURE - SUPPORT - HPC ROTOR ASSEMBLY (GENSPECT) | 1 | |
| 11C3009G01 | FIXTURE, SUPPORT - HPC ROTOR ASSEMBLY (GENSPECT) | 1 | |
| 11C3022 | FIXTURE - INSTALL/REMOVE-DISK - HPT ROTOR - STAGE 2 | 1 | |
| 11C3042 | FIXTURE - CHILL - INTERSTAGE SEAL | 1 | |
| 11C3059 | FIXTURE - LIFT & TURN-HPTR STAGE 2 DISK-AFT | 1 | |
| 11C3087G01 | FIXTURE, REMOVAL - HPC ROTOR, STAGE 5 DISK, STAGES 3-4 SPOOL | 1 | |
| 11C3126 | FIXTURE - CHILL - HPT BLADE RETAINER - STAGE 2 (BLADE RETAINER CHILL FIXTURE) | 1 | |
| 11C3132 | FIXTURE - BUILD-UP STAGE 2 SHROUD HANGER ASSY/INSTL AFT RTNR | 1 | |
| 11C3143 | FIXTURE, INSTALL-STG 1 HANGER/SUPPORT HPT STATOR CASE | 1 | |
| 11C3159 | GUIDE - VERTICAL/HORIZONTAL-TCF/STAGE 2 HPT NOZZLE HANDLING FIXTURE (GUIDE FIXTURE) | 1 | |
| 11C3206 | FIXTURE - TARGET-OIL NOZZLE - NO. 1 BRG | 1 | |
| 11C3206G01 | FIXTURE, TARGET - OIL NOZZLE, NO. 1 BEARING | 1 | |
| 11C3224 | FIXTURE - CHILL-COMPR RTR FLANGE | 1 | |
| 11C3224G01 | FIXTURE, CHILL - HPC ROTOR FLANGE | 1 | |
| 11C3225G01 | FIXTURE, LIFT - HPC ROTOR STAGE 1 BLISK, FORWARD END | 1 | |
| 11C3262G04 | G/B MODULE FIXTURE (GENX-2B) | 1 | |
| 11C3268 | FIXTURE - LIFT - ACCESSORY GEARBOX | 1 | |
| 11C3321 | FIXTURE - REMOVAL-STAGE 2 HPT SHROUD/HANGER SUB-ASSEMBLY | 1 | |
| 11C3335 | FIXTURE - CHILL-FWD FLANGE HP TURB ROTOR | 1 | |
| 11C3336 | FIXTURE - SUPPORT-TRANSFER GEARBOX | 1 | |
| 11C3336G01 | FIXTURE, SUPPORT - TRANSFER GEARBOX | 1 | |
| 11C3339 | FIXTURE - REMOVE-HANGER AFT RETAINER - STG 2-HPT | 1 | |
| 11C3354 | FIXTURE - INSTALL/REMOVE - HPT INTERSTAGE SEAL | 1 | |
| 11C3406G05 | FIXTURE - FAN CASE RUNOUT MEASUREMENT, GENX-1B | 1 | |
| 11C3434 | FIXTURE - LIFT/TURN - HORIZONTAL/VERTICAL HPT NOZZLE ASSY STAGE 2 (LIFT/TURN FIXTURE) | 1 | |
| 11C3436P01 | FIXTURE, GUIDE/PROTECTOR STAGE 1 BLISK, HPC ROTOR | 1 | |
| 11C3541 | FIXTURE, LIFT/TURN-LPT DISK STAGE 1-7 | 1 | |
| 11C3542 | FIXTURE - LIFT-TURN - LPT DISK STAGE 1-7 | 1 | |
| 11C3553 | FIXTURE - LIFT-LPT NOZZLE STAGE 2 | 1 | |
| 11C3554 | FIXTURE - LIFT-LPT NOZZLE STAGE 3 | 1 | |
| 11C3555 | FIXTURE - LIFT - LPT NOZZLE STAGE 4 | 1 | |
| 11C3832 | FIXTURE, PIN ALIGNING ALL STATOR STAGES ? BOOSTER | 1 | |
| 11C4201 | FIXTURE - RESTRAIN-OGV STAGE 10 | 1 | |
| 11C4412G02 | SPL-9927 FIXTURE - LINE REPLACEABLE UNITS, GENX-1B/-2B | 1 | |
| 11C4412G03 | FIXTURE-I/R LINE RPL UNITS-GENX-1B/-2B | 1 | |
| 11C4412G04 | Fixture - Line Replaceable Units, GEnx-1B/-2B | 2 | |
| 11C4413G05 | FIXTURE, INSTALL/REMOVE - TRIM BALANCE CLIP - STAGE 7 LPT BLADE | 1 | |
| 11C4490P02 | FAN STATOR SEPERATION FIXTURE GENX-1B | 1 | |
| 11C4523 | DISASSEMBLY FIXTURE-STAGE 5 RING | 1 | |
| 11C4523G01 | FIXTURE, DISASSEMBLY - STAGE 5 RING RETAINER | 1 | |
| 11C4562 | FIXTURE - INSTALLATION - INTERSTAGE SEAL - HPTR | 1 | |
| 11C4563 | FIXTURE - SEPARATION- INTERSTAGE SEAL / BLADE RETAINER HPTR | 1 | |
| 11C4572P01 | FIXTURE, SHIPPING - FAN STATOR CASE MODULE, GENX-1B/2B | 1 | |
| 11C4579 | FIXTURE - LIFT/TURN - LPT STAGE 6 2B - STG 7 1B | 1 | |
| 11C4588P01 | FIXTURE, SHIPPING - FAN STATOR CASE MODULE, GENX-1B/2B | 1 | |
| 11C4609 | FIXTURE - INSTALL/REMOVE -TRIM BALANCE CLIP - STAGE 6 LPT BLADE | 1 | |
| 11C4609G04 | FIXTURE, INSTALL/REMOVE - TRIM BALANCE CLIP - STAGE 7 LPT BLADE | 1 | |
| 11C4641G01 | FIXTURE-I/R , FUEL SPLIT VALVE-GENX-1B/-2B | 2 | |
| 11C4647P01 | GENX 2B ENGINE LIFT FIXTURE | 1 | |
| 11C4649G01 | SPL-14118 - FIXTURE - LIFT, EEC, GENX-1B & -2B | 1 | |
| 11C4658 | FIXTURE, I/R - HPT INTERSTAGE STAGE SEAL | 1 | |
| 11C4664 | FIXTURE - RAISE/LOWER ACCESORY GEAR BOX MODULE | 1 | |
| 11C4665 | FIXTURE - INSTALL/REMOVE-ACCESSORY GEARBOX MODULE | 1 | |
| 11C4687 | FIXTURE, REMOVE - CDP SEAL AND STAGE 6-10 SP JOINT | 1 | |
| 11C4687G01 | FIXTURE, REMOVE - CDP SEAL AND STAGE 6-10 SP JOINT | 1 | |
| 11C4693G01 | FIXTURE, INSTALL/REMOVE - MAIN FUEL OIL HEAT EXCHANGER | 1 | |
| 11C4818G01 | FIXTURE, REMOVAL - STAGE 2 BLISK/SPOOL, 3-4 HPC ROTOR | 1 | |
| 11C5002G01 | CART, STORAGE - ENGINE LIFT FIXTURE | 1 | |
| 1525-519 | FIXTURE, TARGET, PROXIMITY SENSOR | 1 | |
| 18C1107 | FIXTURE, ADAPTER GENSPECT HPC STG 2-7 | 1 | |
| 18C1118 | FIXTURE, ASSY ADPATER - GENSPECT HP COMPR-ROTOR FWD SHAFT | 1 | |
| 18C1225 | FIXTURE, REMOVAL - STG 2 HPT SHROUD / HANGER SUB ASSY | 1 | |
| 18C1233 | FIXTURE, INSTALL - STG 1 HANGER/SUPPORT STATOR CASE - MANUAL | 1 | |
| 18C1240 | FIXTURE, GRIND - STAGE 2 HPT SHROUDS & NOZZLES | 1 | |
| 18C1260 | FIXTURE, GRIND-STAGE 1 & 2 HPT SHROUDS | 1 | |
| 1900196 | MOTOR/GENERATOR ASSEMBLY FIXTURE | 1 | |
| 1C6274 | FIXTURE SET, INSPECT - PT STATIONARY SEALS, STAGE 2 | 1 | |
| 1C6276 | STAGE 4, SEAL HOLDING FIXTURE | 1 | |
| 1C6277 | STAGE 5, SEAL HOLDING FIXTURE | 1 | |
| 1C6278 | STAGE 6, SEAL HOLDING FIXTURE | 1 | |
| 1C6279 | FIXTURE SET, INSP. LPT STATOR SEAL, STAGE 4 TF39 ENG. | 1 | |
| 1C6279 REV B | FIXTURE SET, INSP. LPT STATOR SEAL, STAGE 4 TF39 ENG. | 1 | |
| 1C6280 | FIXTURE SET, INSPECT - PT STATIONARY SEALS, STAGE 3 | 1 | |
| 1C6281 | FIXTURE SET, INSPECT - PT STATIONARY SEALS, STAGE 5 | 1 | |
| 1C6282 | FIXTURE SET, INSPECT - PT STATIONARY SEALS, STAGE 6 | 1 | |
| 1C6284 | FIXTURE SET, REPAIR - PT INTERSTAGE SEAL, STAGES 2-6 | 1 | |
| 1C6366G01 | FIXTURE LIFT FOR GE EXHAUST DUCT | 1 | |
| 1C6455 | FIXTURE, GRIND - PT ROTOR BLADES, STAGE 1 | 1 | |
| 1C6456 | FIXTURE, GRIND - PT ROTOR BLADES, STAGE 2 | 1 | |
| 1C6457 | FIXTURE, GRIND - PT ROTOR BLADES, STAGE 3 | 1 | |
| 1C6458 | FIXTURE, GRIND - PT ROTOR BLADES, STAGE 4 | 1 | |
| 1C6459 | FIXTURE, GRIND - PT ROTOR BLADES, STAGE 5 | 1 | |
| 1C6460 | FIXTURE, GRIND - PT ROTOR BLADES, STAGE 6 | 1 | |
| 1C6803G01 | LIFT FIXTURE, FRONT FRAME GAS GENERATOR TURNOVER | 1 | |
| 1C6855G01 | FIXTURE,LIFT-ACCESSORY GEARBOX | 1 | |
| 1C6872 | FIXTURE, INST. & REMOAL- ACCESS GEARBOX HORIZ | 1 | |
| 1C6872G01 | FIXTURE, INSTALLATION/REMOVAL, GEARBOX ASSY | 1 | |
| 1C6872G01 | FIXTURE LIFT-ACCESSORY GEARBOX | 1 | |
| 1C6874 | FIXTURE LIFT - ACCESSORY GEAR | 1 | |
| 1C6874G01 | FIXTURE LIFT - ACCESSORY GEAR | 1 | |
| 1C6950P37 | HPT TORQUE FIXTURE SPACER BRAND (GE) | 1 | |
| 1C8000G01 | FIXTURE SPREADER, HPCR STAGE 1 | 1 | |
| 1C8018G01 | GE LM2500 G4 ENGINE LIFT FIXTURE | 1 | |
| 1C8031 | FIXTURE - HINGE | 1 | |
| 1C8031G05 | Fixture, Hinge - Upper Compressor Case | 1 | |
| 1C8032G01 | Fixture, Hinge - Low Pressure Turbine Stator Case | 1 | |
| 1C8032G03 | FIXTURE, HINGE - LOW PRESSURE TURBINE STATOR CASE | 1 | |
| 1C8080 | FIXTURE, LIFT-GAS TURB/GAS GEN | 1 | |
| 1C8118G03 | Fixture, Alignment - Gas Generator to Power Turbine | 1 | |
| 1C8161 | FIXTURE, ASSY HP TURB. INTERSTAGE SEAL | 1 | |
| 1C8161 REV C | FIXTURE, ASSY HP TURB. INTERSTAGE SEAL | 1 | |
| 1C8200 | FIXTURE, LIFTING- GAS GENERATOR | 1 | |
| 1C8217 | FIXTURE, LIFT- HP TURB NOZZLE STAGE 1 | 1 | |
| 1C8217G01 | Fixture, Lift - High Pressure Turbine Nozzle Stage 1 | 1 | |
| 1C8217G02 | Fixture, Lift - High Pressure Turbine Nozzle Stage 1 | 1 | |
| 1C8300G01 | FIXTURE, SUPPORT-HP COMPRESSOR STAGE 0 | 1 | |
| 1C8332 | FIXTURE - LIFT GAS GENERATOR | 1 | |
| 1C8332G01 | FIXTURE, LIFT - GAS GENERATOR TURNOVER FRONT FRAME | 1 | |
| 1C8340G01 | Fixture, Lift- Gas generator | 1 | |
| 1C8481G01 | FIXTURE, LIFT - GAS GENERATOR/GAS TURBINE | 1 | |
| 1C9300G01 | FIXTURE BHGE 1C9300G01FOR LIFTING AIR COLLECTOR USED IN WP 2310 00 SPECIAL TOOL (LIFTING TOOL) FOR REPLACEMENT FRONT FRAME AIR COLLECTOR | 1 | |
| 1C9355 | FIXTURE, ASSEMBLY IMPINGEMENT - NO.1 BRG OIL NOZZL | 1 | |
| 1C9390G01 | FIXTURE ASSEMBLY BHGE 1C9390G01 FOR LIFT AND TURN - VIGV USED IN WP 2110 00 SPECIAL TOOL FOR INLET GIDE VANE (IGV) ASSEMBLY REPLACEMENT T | 1 | |
| 1C9400 | FIXTURE SET, RAISE & HINGE- UPPER COMPR CASE | 1 | |
| 1C9400G01 | Fixture set raise and hinge upper compressor case | 1 | |
| 1C9403G01 | FIXTURE BHGE 1C9403G01 CHECK VSV/VIGV ACTUATOR USED IN WP 1112 00 | 1 | |
| 1C9602G01 | FIXTURE, LIFT - LPC CASE, STAGES 0-3 | 1 | |
| 1C9621G01 | FIXTURE, SUPPORT BHGE 1C9621G01 USED IN WP 1510 00 SPECIAL TOOL FOR GAS FUEL SYSTEM REPLACEMENT | 1 | |
| 1R18209 | Fixture, Grinding - HP Compressor, Stage 6 Variable Stator Vanes | 1 | |
| 2024046-1 | LEAKAGE CHECK FIXTURE | 1 | |
| 2024061-1 | Air Leakage Test Fixture | 1 | |
| 2024072-1 | FLOW LEAKAGE TEST FIXTURE | 1 | |
| 2024487-1 | GAGE FIXTURE | 1 | |
| 2024593-1 | LEAKAGE TEST FIXTURE SET | 1 | |
| 2024736-1 | AIR LEAKAGE TEST FIXTURE | 1 | |
| 2024736-4 | AIR LEAKAGE TEST FIXTURE | 1 | |
| 2056B0000-02W01 | EDGE REPAIR FIXTURE | 1 | |
| 21C11423G01 | FIXTURE ASSEMBLY STAGE 1 FAN BLADE | 1 | |
| 21C7099G01 | FIXTURE,RUNOUT,GAS GEN RTR | 1 | |
| 21C7202P01 | FIXTURE. GAGE | 1 | |
| 21C7203P01 | FIXTURE, GAGE | 1 | |
| 21C7237G01 | GRINDING FIXTURE, COMPRESSOR DISCHARGE ROTATING SEAL | 1 | |
| 21C7280G01 | FIXTURE, MASKING, STAGE 2 BLISK | 1 | |
| 21C7397G02 | FIXTURE, STAGE 1 BLADE EXTENSION | 2 | |
| 21C7398G02 | FIXTURE, STAGE 2 BLADE EXTENSION | 2 | |
| 21C7479G01 | POSITIONING, GAS GENERATOR COOLING PLATES FIXTURE | 1 | |
| 21C7729G01 | FIXTURE, STAGE 1 GAS GENERATOR ROTOR FORWARD PRESSURE FLUSHING | 1 | |
| 21C7730G01 | FLUSH FIXTURE STAGE 2GG | 1 | |
| 21C7731G02 | FWD PRESSURE, FLUSH FIXTURE, STAGE 1 NOZZLE | 1 | |
| 21C7786G01 | FLUSH FIXTURE REV STAGE 1 | 1 | |
| 21C7787G01 | FLUSH FIXTURE REV STAGE 2 | 1 | |
| 21C7821G01 | FIXTURE, GAS GENERATOR STATOR ASSEMBLY | 1 | |
| 21C7881P01 | T700 STAGE 2 BLISK GRINDING FIXTURE | 1 | |
| 21C8104G01 | FIXTURE FAN VARIABLE GEOMETRY SETTING | 1 | |
| 21C8138G01 | FIXTURE STAGE 1 FAN BLADE | 1 | |
| 2550184 | Fixture – Leakage | 1 | |
| 2557854 | PRESSURIZING VALVE COVER SIZING FIXTURE (CAGE: 06848) | 1 | |
| 2557866 | SHUTTLE VALVE BLEED HOLDING FIXTURE (CAGE: 06848) | 1 | |
| 2558804 | WHEEL HUB HEATING FIXTURE) - CAGE: 06848 | 1 | |
| 2562112 | CFM56 ESS TEST FIXTURE (CAGE: 06848) | 1 | |
| 2566526 | INTEGRATOR SLEEVE FREEZE FIXTURE PULLER (CAGE: 06848) | 1 | |
| 2566531 | ASSEMBLY FIXTURE (CAGE: 06848) | 1 | |
| 2566535 | METERING VALVE ASSEMBLY FIXTURE (CAGE: 06848) | 1 | |
| 2566536 | PRESSURIZING VALVE COVER TORQUING FIXTURE (CAGE: 06848) | 1 | |
| 2566539 | EHSV PROTECTIVE COVER FIXTURE (CAGE: 06848) | 1 | |
| 2566542 | EHSV TEST COVER FIXTURE (CAGE: 06848) | 1 | |
| 2566800 | BYPASS VALVE SLEEVE INSTALLATION FIXTURE (CAGE: 06848) | 1 | |
| 2566802 | PCR REGULATOR FREEZE FIXTURE (CAGE: 06848) | 1 | |
| 2566810 | METERING VALVE SLEEVE FREEZE FIXTURE (CAGE: 06848) | 1 | |
| 2566819 | MAGNET RETAINER FREEZE FIXTURE (CAGE: 06848) | 1 | |
| 23033043 | FIXTURE--HOLDING, SERIES II 4TH STAGE NOZZLE | 1 | |
| 23037978 | FIXTURE BLAST, COMPRESSOR FOURTH-STAGE VANE AND BAND ASSEMBLY | 1 | |
| 23037982 | FIXTURE--HOLDING, COMPRESSOR FIRST-, SECOND-, THIRD-, AND FOURTH-STAGE VANE ASSEMBLY | 1 | |
| 23037983 | FIXTURE--BLAST, COMPRESSOR FIRST-STAGE VANE AND BAND ASSEMBLY | 1 | |
| 23037984 | FIXTURE--BLAST, COMPRESSOR SECOND-STAGE VANE AND BAND ASSEMBLY | 1 | |
| 23037985 | FIXTURE--BLAST, COMPRESSOR THIRD-STAGE VANE AND BAND ASSEMBLY | 1 | |
| 23050254 | FIXTURE, OIL PUMP SCAVENGE RG | 1 | |
| 23051176 | Fixture – Assembly, Spur Assembly Gear-shaft | 2 | |
| 23052541 | Fixture – Holding, Inner Gas Generator Case Assembly | 1 | |
| 23053680 | Fixture – Assembly, Wheel 2nd & 3rd Stage, Low Pressure Turbine Rotor | 1 | |
| 23053681 | Fixture – Assembly Wheel 1st Stage, Forward & Aft Shaft, LPT Rotor | 1 | |
| 23054848 | Fixture – Grinding, Offset Gas Generator Blade track Grinding | 1 | |
| 23055289 | Fixture – Buildup, 1st Stage Vane And Support Assembly | 1 | |
| 23055676 | Fixture – Inner Band, Installation 1st and 2nd Stage | 1 | |
| 23055677 | Fixture – Inner Band, Installation 3rd 4th and 5th Stage | 1 | |
| 23055761 | FIXTURE, GRID, 3RD STAGE WHEEL AND BLADE | 1 | |
| 23055778 | Fixture – Grind 2nd Stage Turbine Wheel and Blade | 1 | |
| 23055779 | Fixture – Grind, !st Stage Turbine Wheel & Blade | 1 | |
| 23058483 | Fixture – Alignment, 2nd Stage Vane Ring To Case | 1 | |
| 23060722 | Fixture – Spray, Compressor Vane Stages 6-13 | 1 | |
| 23068504 | Fixture – Grind, Low Pressure Turbine, 1st Stage | 1 | |
| 23068505 | Fixture – Grind, LP Turbine 2nd Stage Wheel and Blade | 1 | |
| 23068519 | Fixture – Grind, 1st Stage Vane and Support | 1 | |
| 2566532-38 | TRAVEL CHECK FIXTURE ASSEMBLY (CAGE: 06848) | 1 | |
| 2566819-2 | MAGNET RETAINER ASSEMBLY FREEZE FIXTURE (CAGE: 06848) | 1 | |
| 26142-AT1 | GEROTOR PIN PRESS FIXTURE | 1 | |
| 26142AT1 | GEROTOR PIN PRESS FIXTURE | 1 | |
| 285701-1-1 | Gear Drilling Fixture | 1 | |
| 287887-1 | Diaphragm Leakage Test Fixture | 1 | |
| 287912-1 | FIXTURE CHECKING GEAR BACKLASH | 1 | |
| 289442-1 | LEAKAGE CHECK FIXTURE | 1 | |
| 291441-1 | FIXTURE LEAKAGE SEAL TEST | 1 | |
| 291985-1 | GEARSHAFT NUT TORQUING FIXTURE | 1 | |
| 293824-1 | BORING MACHINE GEAR BOX HOLDING FIXTURE | 1 | |
| 294458-1 | THIRD STAGE LP STATOR FIXTURE | 1 | |
| 2960A0000-01 | FIXTURE, LDG GEAR ASSY(GSE343) 190 | 2 | |
| 296316-1 | GAGE FIXTURE | 1 | |
| 296317-1 | Hinge pin drill fixture | 1 | |
| 296317-1PM | HINGE PIN DRILL FIXTURE | 1 | |
| 296326-1 | GAGE FIXTURE | 1 | |
| 296559-1 | FLANGE PRESS FIXTURE | 1 | |
| 296725-1 | FIXTURE SPLITTER GEARBOX TORQUING | 1 | |
| 298029-1 | GEARBOX HANDLING FIXTURE (TO HOLD GEARBOX STABLE FOR REMOVAL OR INSTALLATION) | 1 | |
| 298057-1 | GEARBOX HANDLING FIXTURE | 1 | |
| 2AJ65B81120 | ASSEMBLY FIXTURE - ANGLE GEARBOX ASSEMBLY, TRAILING EDGE FLAP DRIVE | 1 | |
| 2AJ65B81121 | ASSEMBLY FIXTURE - ANGLE GEARBOX ASSEMBLY TRAILING EDGE FLAP DRIVE | 1 | |
| 2AJ65B81130 | ASSEMBLY FIXTURE - ANGLE GEARBOX ASSEMBLY TRAILING EDGE FLAP DRIVE | 1 | |
| 2AJ65B81131 | ASSEMBLY FIXTURE - ANGLE GEARBOX ASSEMBLY TRAILING EDGE FLAP DRIVE | 1 | |
| 2C14003G01TK | FIXTURE, LIFT&TURN-HPTR STAGE 1 DISK | 1 | |
| 2C14042G01TK | FIXTURE , ASSEMBLY-STAGE 2 HPT NOZZLE | 1 | |
| 2C14083G01 | FIXTURE, LIFT - ACCESSORY GEARBOX | 1 | |
| 2C14096 | SEATING GAGE FIXTURE | 1 | |
| 2C14107 | FIXTURE-R/I ACCESSORY GEARBOX DRIVE SHAFT | 1 | |
| 2C14107 REV D | FIXTURE, REMOVE/INSTALL ACCESS. GEARBOX DRIVE SHAFT | 1 | |
| 2C14107G01 | FIXTURE-R/I ACCESSORY GEARBOX DRIVE SHAFT | 10 | |
| 2C14124 | FIXTURE, SEAL/PRESSURIZE ACCESS. GEARBOX | 1 | |
| 2C14124 REV D | FIXTURE, SEAL/PRESSURIZE ACCESS. GEARBOX | 1 | |
| 2C14124G02 | FIXTURE, SEALPRESSURE-ACCESSORY GEAR BOX | 4 | |
| 2C14137G01 | TOOL - FIXTURE, ACCESSORY GEAR BOX (AGB) MATING RING INSTALL | 11 | |
| 2C14137G02 | TOOL - FIXTURE, ACCESSORY GEAR BOX (AGB) MATING RING INSTALL | 7 | |
| 2C14138 | FIXTURE, REMVL-MATING SEAL RINGS - ACCESS GEARBOX | 1 | |
| 2C14138 REV B | FIXTURE, REMOVAL-MATING SEAL RINGS - ACCESS. GEARBOX | 1 | |
| 2C14138G01 | FIXTURE REMOVAL MATING SEAL RINGS ACC GEARBOX CF6-80C2 | 11 | |
| 2C14138G02 | FIXTURE REMOVAL MATING SEAL RINGS ACC GEARBOX CF6-80C2 | 12 | |
| 2C14204G01TK | FIXTURE, LIFT-HPC ROTOR STAGE 11-14 POOL/SHAFT | 1 | |
| 2C14219 | FIXTURE - ASSEMBLY -STAGE 1 LPTN | 1 | |
| 2C14239 | FIXTURE, RUNOUT - HIGH PRESS. TURB. RTR AFT FLANGE | 1 | |
| 2C14239 REV G | FIXTURE, RUNOUT - HIGH PRESS. TURB. RTR AFT FLANGE | 1 | |
| 2C14239G03 | FIXTURE, RUNOUT ‐ HPT ROTOR, AFT FLANGE | 2 | |
| 2C14630G02 | FIXTURE,PRELOAD-STAGE 1 FAN BLADE SPAC | 1 | |
| 2C14644 | FIXTURE, INSTALL/REMOVE ACCESS. GEARBOX MODULE | 1 | |
| 2C14644 REV K | FIXTURE, INSTALL/REMOVE ACCESS. GEARBOX MODULE | 1 | |
| 2C14645 | FIXTURE,LIFT-ACCESSORY GEARBOX | 1 | |
| 2C14654G01 | FIXTURE, LIFT ‐ LPT STAGE 5 DISK | 1 | |
| 2C14668G01 | FIXTURE, ASSEMBLY, LPT NOZZLE ‐ STAGE 1 | 3 | |
| 2C14668G01TK | FIXTURE SET, INSTALLATION AND REMOVAL LPT NOZZLES STAGE 1 | 1 | |
| 2C14668G02 | FIXTURE SET, INSTALLATION AND REMOVAL - LPT NOZZLES STAGE 1 | 1 | |
| 2C14676G01 | FIXTURE, INSTALLATION / REMOVAL ‐ OUTER AIR TUBE, STAGE 1 NOZZLE | 1 | |
| 2C14676G02 | FIXTURE INST/REM AIR TUBE STAGE 1 | 1 | |
| 2C14695G01 | FIXTURE, LIFT - STAGE 1 HPT NOZZLE ASSEMBLY | 2 | |
| 2C14695G01TK | FIXTURE, LIFT-STAGE 1 HPT NOZZLE ASSEMBLY | 1 | |
| 2C14696 | FIXTURE, ASSY - STAGE 1 HP TURB NOZZLE | 1 | |
| 2C14696 REV E | FIXTURE, ASSY - STAGE 1 HP TURB NOZZLE | 1 | |
| 2C14696G01 | FIXTURE, ASSEMBLY ‐ STAGE 1 HPT NOZZLE | 1 | |
| 2C14696G01TK | FIXTURE, ASSEMBLY HPT NOZZLE STAGE 1 | 1 | |
| 2C14696G02 | FIXTURE, ASSEMBLY - STAGE 1 HIGH PRESSURE TURBINE NOZZLE | 1 | |
| 2C14702G01 | FIXTURE, ASSEMBLY-HPT NOZZLE STAGE 2 | 2 | |
| 2C14712G01 | FIXTURE – R&I, ACCESS GEARBOX DRIVE SHAFT | 8 | |
| 2C14714G02 | FIXTURE, TORQUE/RESTRAINT ‐ STAGE 2 HPT NOZZLE | 1 | |
| 2C14718G02 | FIXTURE, INSTALLATION AND REMOVAL - AIR TUBE, HPT STAGE 2 NOZZLE | 2 | |
| 2C14725G01 | FIXTURE LIFT, INLET GEARBOX | 1 | |
| 2C14770G01 | FIXTURE, INSPECT-LPT NOZZLE ASSEMBLY STAGE 1 | 2 | |
| 2C14772 | FIXTURE CLAMPING- STAGE 1 LP TURBINE SHROUD | 1 | |
| 2C14772 REV A | FIXTURE CLAMPING- STAGE 1 LP TURBINE SHROUD | 1 | |
| 2C14772G01 | FIXTURE, CLAMPING – STAGE 1 LPT SHROUD | 1 | |
| 2C14772G01TK | FIXTURE, CLAMPING-STAGE 1 LPT SHROUD | 1 | |
| 2C14816G01 | FIXTURE, LIFT/TURN,FIXTURE, LIFT/TURN,STAGE 2 HPT SHROUD ASSEMBLY | 1 | |
| 2C14823G01 | FIXTURE,GRIND,HIGH PRESSURE TURBINE STAGE 2 SHROUDS | 1 | |
| 2C14836G01 | FIXTURE, INSTALL/REMOVE - STAGE 2 AFT BLADE RETAINER (INSTALL/REMOVE FIXTURE) | 1 | |
| 2C14836G02 | FIXTURE, INSTALL/REMOVE - STAGE 2 AFT BLADE RETAINER (INSTALL/REMOVE FIXTURE) | 1 | |
| 2C14981G01 | FIXTURE, LIFT - ROTATING INTERSTAGE SEAL | 1 | |
| 2C15618 | FIXTURE, BOND-BLOCKER DOOR HINGES | 1 | |
| 2C15618G01 | FIXTURE, BOND-BLOCKER DOOR HINGES | 1 | |
| 2C15619 | FIXTURE, BOND-BLOCKER DOOR HINGES | 1 | |
| 2C15619G01 | FIXTURE, BOND-BLOCKER DOOR HINGES | 1 | |
| 2C15629 | INSPECTION FIXTURE, FAN BLADES STAGE 1 | 1 | |
| 2C18012 | FIXTURE, PRELOAD - SPACER, STAGE 1 FAN BLADE | 2 | |
| 2C18012G01 | FIXTURE PRELOAD-SPACER STAGE 1 FAN BLADE | 2 | |
| 2C18012G02 | FIXTURE PRELOAD-SPACER STAGE 1 FAN BLADE | 6 | |
| 2C18012GO2 | FIXTURE, PRELOAD - SPACER, STAGE 1 FAN BLADE | 6 | |
| 2C18019G01 | FIXTURE,LIFT,LPT DISK,STAGE 5 | 1 | |
| 2C18063G01 | FIXTURE, LIFT, LPT NOZZLE ASSEMBLIES, STAGE 2-4 | 1 | |
| 2C18118 | FIXTURE, GAGE GO- STATIONARY AIR/OIL SEAL, NO 4 BRG | 1 | |
| 2C5203P01 | FIXTURE, HPT STAGE 2 DISK SEATING CHECK | 1 | |
| 2C5872 | HPT STAGE 1 RUNOUT FIXTURE | 1 | |
| 2C5872G01 | FIXTURE, HPT ROTOR STAGE 1 DISK RUNOUT | 1 | |
| 2C6031G02 | FIXTURE, LIFT ‐ HPCR STAGES 3‐9 SPOOL | 1 | |
| 2C6037G01 | FIXTURE, SUPPORT-STAGES 1-2 | 1 | |
| 2C6060G02-2044 | FIXTURE, LIFT - HPT NOZZLE, STAGE1 | 1 | |
| 2C6084G04 | NO.5 BEARING SPANNER NUT FIXTURE (LONG) BRAND (GE) | 1 | |
| 2C6123G03 | GEAR BOX FIXTURE | 2 | |
| 2C6259G04 | FIXTURE SET- STAGE 3 THROUGH 6 VARIABLE STATOR ARMS SECURE | 1 | |
| 2C6269 | FIXTURE INSTALL REMOVE-SPACER STAGE 1 FAN BLADE | 1 | |
| 2C6825 | FIXTURE,LIFT-TURBINE REVERSER. (GE) | 1 | |
| 2C6908G01TK | FIXTURE, ALIGNMENT, GEARBOX TUBING | 1 | |
| 2C6916G01 | FIXTURE CUTTER STAGE 1 FAN SHROUD | 1 | |
| 2C6998G05 | FIXTURE SET REMOVAL MATING SEAL RINGS-ACCESORY GEARBOX | 2 | |
| 2C7546G11 | FIXTURE - FAN BLADE LEADING EDGE, 60 HZ | 1 | |
| 2C7546G12 | FIXTURE - FAN BLADE LEADING EDGE, 50 HZ | 1 | |
| 2C7549 | FIXTURE, COMPRESSOR ROTOR BLADE LENGTH GAGE | 1 | |
| 2C7549 REV U | FIXTURE, COMPRESSOR ROTOR BLADE LENGTH GAGE | 1 | |
| 2C7761G02 | FIXTURE, POSITIONING-STAGE 8 MANIFOLD | 1 | |
| 2C7761P31 | FIXTURE, POSITIONING-STAGE 8 MANIFOLD | 1 | |
| 2C8072 | FIXTURE, PRELOAD-SPACER STAGE 1 FAN BLADE 1 | 1 | |
| 2C8073 | FIXTURE,PRELOAD-SPACER STAGE 1 FAN BLADE | 2 | |
| 2C8073G01 | FIXTURE,PRELOAD-SPACER STAGE 1 FAN BLADE | 2 | |
| 2C8073G02 | FIXTURE,PRELOAD-SPACER STAGE 1 FAN BLADE | 1 | |
| 2C8073G03 | FIXTURE,PRELOAD-SPACER STAGE 1 FAN BLADE | 1 | |
| 2C8073G04 | FIXTURE,PRELOAD-SPACER STAGE 1 FAN BLADE | 8 | |
| 2C8073G05 | FIXTURE,PRELOAD-SPACER STAGE 1 FAN BLADE | 13 | |
| 2C81236G01 | FIXTURE, GENSPECT COMPRESSOR | 1 | |
| 2C81301G01 | FIXTURE, ASSEMBLY - STAGE 2 NOZZLE | 1 | |
| 2C81305G01 | FIXTURE, HOLDING - STAGE 2 NOZZLE | 1 | |
| 2C81448P01 | FIXTURE, SUPPORT, STAGE 1 DISK - HPT | 1 | |
| 2C81452G02 | FIXTURE, INSTALL/REMOVE STAGE 1 | 1 | |
| 2C81455G01 | FIXTURE, ASSEMBLE OTC TO STAGE 2 | 1 | |
| 2C81459G02 | FIXTURE, STAGE 1 AND 2 HPT SHROUD | 1 | |
| 2C81542G01 | LIFT FIXTURE, STAGE 3 NOZZLE ( | 1 | |
| 2C81622 | FIXTURE - TARGET CHECK - PTO OI | 1 | |
| 2C81622G01 | FIXTURE - TARGET CHECK - PTO OI | 1 | |
| 2C81631G01 | FIXTURE, LOCKING, PTO BEVEL GE | 1 | |
| 2C81801 | FIXTURE, HOLDING GENERAL PURP | 1 | |
| 2C81801G01 | FIXTURE HOLDING - GENERAL PURPOSE | 1 | |
| 2C90479G01 | FIXTURE, GAS GENERATOR COOLING PLATES POSITIONING | 1 | |
| 2C90567G01 | FIXTURE, GAS GENERATOR ASSEMBLY | 1 | |
| 2C90595G01 | FIXTURE, GAS GENERATOR STATOR ASSEMBLY | 1 | |
| 2C90714G01 | T701C T701D>. FIXTURE, STAGE 2 GAS GENERATOR ROTOR FORWARD PRESSURE FLUSHING | 1 | |
| 2C91031G01 | Fixture Accessory Drive Gearbox (AGB) Positionning | 1 | |
| 2C91133G01 | FIXTURE-BRAZING SCAVENGE TUBE | 1 | |
| 2C91254G02 | FIXTURE, RESTRAINT - VG STAGES 3 THROUGH 5, GRIND | 1 | |
| 2C91350G01 | FIXTURE, STAGE 1-2 ROTOR COOLING PLATES ASSEMBLY/DISASSEMBLY | 1 | |
| 2C91354G02 | FIXTURE - MANUFACTURER GENERAL ELECTRIC | 10 | |
| 2C91364G03 | FIXTURE, STAGE 2 AFT COOLING PLATE | 1 | |
| 2ME65B94600 | AFT MOUNT ADAPTER - GE LIFT FIXTURE, CF6-50 ENGINE | 1 | |
| 2R1005 | WELD FIXTURE - TMF OUTER FLANGE | 1 | |
| 2R1050G01 | FIXTURE, SHOT PEEN DOVETAIL, STAGE 1 FAN ROTOR DISK (PEEN FIXTURE) | 1 | |
| 2R1120 | FIXTURE, DOVETAIL MACHIN. STAGE 1 ROTOR FAN BLADE | 1 | |
| 2R1131 | STAGE 1 DATUM P MACHINE FIXTURE | 1 | |
| 2R1132 | STAGE 2 DATUM P MACHINE FIXTURE | 1 | |
| 2R1133 | STAGE 3 DATUM P MACHINE FIXTURE | 1 | |
| 2R1135 | STAGE 5 DATUM P MACHINE FIXTURE | 1 | |
| 2RII20 | FIXTURE, DOVETAIL MACHIN. STAGE I ROTOR FAN BLADE | 1 | |
| 2SK50210-1 | FIXTURE - KRUEGER FLAPS ACTUATOR VALVE BLOCK LEAKAGE T | 1 | |
| 2TSJ65B01539-1 | TEST FIXTURE - ACTUATOR, TRUCK POSITIONER, WING LANDING GEAR | 1 | |
| 30R0004G02 | FIXTURE, DRILL - SET SCREW, F414 HPC ROTOR, STAGE 4 -7 | 1 | |
| 330A93-3412-00 | TOOL, BALL BEARING CAGE FIXTURE | 1 | |
| 330A93341200 | TOOL,BALL BEARING CAGE FIXTURE | 1 | |
| 3402900-1 | MAIN LANDING GEAR TIEDOWN FIXTURE | 1 | |
| 3403264-1 | MAIN LANDING GEAR TIEDOWN FIXTURE | 1 | |
| 35004-0-2000 | Gear Press Fixture | 1 | |
| 350A93-3302-01 | T/R HUB HOLDING FIXTURE - YOKE RESTRAINT-LARGE | 1 | |
| 350A93322400 | TOOL PLANET GEAR BOX FIXTURE | 1 | |
| 369A5107-3 | HOLDING FIXTURE INPUT GEAR "C" MODEL MAIN ROTOR | 1 | |
| 369D29915 | OUTPUT GEARSHAFT HOLDING FIXTURE | 1 | |
| 3791008-1 | LEAKAGE FIXTURE ASSY | 2 | |
| 3791008-1 PM | LEAKAGE FIXTURE ASSY | 1 | |
| 3791008-1PM | LEAKAGE FIXTURE ASSY | 1 | |
| 3791461-1 | Leakage Fixture Assy | 1 | |
| 3791461-1PM | LEAKAGE FIXTURE | 1 | |
| 3T900-0101 | FIXTURE, GAUGE | 11 | |
| 3TSJ65B01503-1 | TEST FIXTURE - ACTUATOR ASSEMBLY, NOSE LANDING GEAR STEERING | 1 | |
| 4.92001E 12 | FWD PRESSURE, FLUSH FIXTURE, STAGE 1 ROTOR | 1 | |
| 4170 | CONCORDE® 4170 BC BATTERY CAPACITY TESTER / CHARGER CALIBRATION FIXTURE – CF-1 | 2 | |
| 442238-F-8 | HEAD SENSOR HOLD-DOWN COVER FIXTURE (CAGE: 06848) | 1 | |
| 4MIT65B82591 | TORQUE FIXTURE - PISTON, STEERING ACTUATOR, NOSE LANDING GEAR | 1 | |
| 501090 | L-382 QEC DRILLING FIXTURE & PROP LINKAGE TOOL | 1 | |
| 5213A0000-01 | FIXTURE, LDG GEAR ASSY(GSE348)EMB | 3 | |
| 53065-TF3 | MOUNTING FLANGE TEST FIXTURE | 1 | |
| 53065TF17 | MOUNTING FLANGE TEST FIXTURE | 1 | |
| 53065TF3 | MOUNTING FLANGE TEST FIXTURE | 1 | |
| 53080TF1 | MOUNTING FLANGE FIXTURE | 1 | |
| 57949A0000-01 | FIXTURE,HOLDING,NOSE LANDING GEAR | 2 | |
| 57949A0000‐01 | FIXTURE,HOLDING,NOSE LANDING GEAR | 2 | |
| 5916803-1 | FIXTURE, MAIN LANDING GEAR DAMPER CHECK | 8 | |
| 59197A0000-01 | GSE 343 LANDING GEAR ASSEMBLY FIXTURE FOR E175 | 1 | |
| 5965683 REV A | FIXTURE - SUPPORT, FWD HINGE BEAM, THRUST RVSR | 1 | |
| 5965683-5 | FIXTURE UPPER FWD L.H. T/R HINGE BEAM SUPPORT | 1 | |
| 5965683-6 | FIXTURE UPPER FWD R.H. T/R HINGE BEAM SUPPORT | 1 | |
| 5MIT65B01503 | TORQUE FIXTURE - STEERING ACTUATOR PISTON, NOSE LANDING GEAR | 2 | |
| 623A050-A | SOUND PRESSURE GAUGE TEST FIXTURE | 1 | |
| 6429927-1 | Generator Assembly Fixture | 1 | |
| 68920-652 | GEARWHEEL POSITIONING FIXTURE | 1 | |
| 70742 | SUN GEAR LIFTING FIXTURE | 1 | |
| 735-10412 | GEAR ALIGNMENT FIXTURE | 1 | |
| 74194TF3-101 | FIRST STAGE SETUP FIXTURE | 1 | |
| 74194TF3-102 | FIRST STAGE SETUP FIXTURE | 1 | |
| 75800T7 | First Stage Test Fixture | 1 | |
| 75800T8 | First Stage Test Fixture | 1 | |
| 803440-S58- 10 | REGULATOR TEST FIXTURE (INTERNAL LEAKAGE TEST) | 1 | |
| 803440-S58-10 | REGULATOR TEST FIXTURE (INTERNAL LEAKAGE TEST) | 1 | |
| 830006-809-00671 | ARBOR PRESS FIXTURE TAIL ROTOR GEARBOX HOUSING | 1 | |
| 830006-809-00682 | ASSEMBLY & DISASSEMBLY FIXTURE GEARBOX BEV/PIN | 1 | |
| 833129-1 | BEARING AND GEAR REMOVAL FIXTURE | 1 | |
| 833207-1 | TOOL - ALIGNMENT, BEARING GEAR FIXTURE | 2 | |
| 833477-1 | PLANETARY GEAR TIMING FIXTURE | 1 | |
| 833549-1 | FIXTURE GAGE STOP POSITION | 1 | |
| 833549-1PM | STOP POSITION FIXTURE GAGE | 1 | |
| 834708-1 | LIFTING FIXTURE GEAR BOX | 1 | |
| 834731 | Centering Fixture, 1st and 2nd Stage Impeller Axial Tip Clearance | 1 | |
| 5965683 | FIXTURE - SUPPORT, FWD HINGE BEAM, THRUST RVSR | 1 | |
| 6037500 | DRIBBLE FLOW TEST FIXTURE USED ON THE LARGE NOZZLE METERING TIPS FOR DRIBBLE FLOW TEST. | 1 | |
| 6796345 | FIXTURE - BORING, PINION GEAR BUSHING | 2 | |
| 6796446 | Check Fixture- Propeller Control Linkage | 1 | |
| 6796609 | GAGE ,SETTING,COMPRESSOR CASE BORING FIXTURE | 1 | |
| 6796708 | FIXTURE - CHECK, PROPELLER CONTROL LINKAGE | 3 | |
| 6796796 | FIXTURE - SWAGE | 1 | |
| 6796937 | FIXTURE - CHECK, PINION GEAR BUSHING CONCENTRICITY | 2 | |
| 6797589 | FIXTURE – BENDING, SUN GEAR HUB LOCK TAB | 2 | |
| 6797590 | SIDE GEAR CHECKING FIXTURE | 2 | |
| 6798239 | Fixture â Holding, Tach Drive Idler Gear | 2 | |
| 6798787 | FIXTURE - PRESSURE CHK, COMP DISCHARGE AIR TUBE AS | 1 | |
| 6799596 | SHAFT GEAR OIL SEAL FIXTURE - INSTALLATION, SPEED | 2 | |
| 6799628 | FIXTURE - MEASURING, THERMOCOUPLE WARPAGE | 3 | |
| 6799707 | FIXTURE 2ND,3RD & 4TH STAGE TURBINE VANES | 1 | |
| 6799708 | FIXTURE, ALIGNMENT OIL SCAVENGER TUBES | 2 | |
| 6799765 | FIXTURE - ALIGNMENT, REDUCTION GEAR EYEBOLT | 2 | |
| 6833108 | PURGE FIXTURE | 1 | |
| 6851342 | FIXTURE - ALMEN TEST, 1ST STAGE COMP WHEEL | 1 | |
| 6851343 | FIXTURE - ALMEN TEST, 2ND AND 3RD STAGE COMP WHEEL | 1 | |
| 6851344 | FIXTURE - ALMEN TEST, 4TH STAGE COMP WHEEL | 1 | |
| 6851345 | FIXTURE - ALMEN TEST, 5TH AND 6TH STAGE COMP WHEE | 1 | |
| 6851346 | FIXTURE - ALMEN TEST, 5TH STAGE COMP WHEEL | 1 | |
| 6851347 | FIXTURE - ALMEN TEST, 6TH STAGE COMP WHEEL | 1 | |
| 6872178 | FIXTURE - FLOW CHECK AND TARGET | 1 | |
| 6872504 | FIXTURE - AIR FLOW MEASURING 1ST STAGE | 1 | |
| 6872505 | FIXTURE - AIR FLOW MEASURING 3RD STAGE | 1 | |
| 6872546 | BLEED VALVE CONTROL FIXTURE GAUGE | 2 | |
| 6872601 | FIXTURE - WELDING, COMPRESSOR DISCHARGEAIR TUBE | 1 | |
| 6872602 | FIXTURE - GRINDING, COMP DISCHARGE AIR TUBE | 1 | |
| 6872603 | FIXTURE - PRESSURE TEST, COMP DISCHARGE AIR TUBE | 1 | |
| 6872880 | FIXTURE----CHECKING, COMPRESSOR MOUNTING INSERTS (GEARBOX) | 1 | |
| 6872936 | ADAPTER - SERIES 1 1ST STAGENOZZLE FIXTURE | 1 | |
| 6872937 | FIXTURE----HOLDING, SERIES I AND II 1ST STAGE NOZZLE | 1 | |
| 6872938 | FIXTURE - HOLDING 2ND STAGE | 1 | |
| 6872940 | FIXTURE - HOLDING 4TH STAGE | 1 | |
| 6872941 | FIXTURE - HOLDING SERIES 2 4TH STAGE | 1 | |
| 6872943 | FIXTURE - HOLDING, SERIES 2 3RD STAGE | 1 | |
| 6872945 | ADAPTER----SERIES II 3RD AND 4TH STAGE NOZZLE FIXTURES | 1 | |
| 6872947 | FIXTURE - HOLDING 1ST STAGE | 1 | |
| 6872948 | FIXTURE----HOLDING, SERIES II 3RD STAGE NOZZLE SHOT PEENING | 1 | |
| 6877003 | TURNING FIXTURE SUPPORT MOUNTING FLANGE | 1 | |
| 6877014 | PURGE FIXTURE AIR | 1 | |
| 6877015 | PURGE FIXTURE ARGON | 1 | |
| 6877016 | Fixture, Purge | 1 | |
| 6877017 | Fixture, Purge | 1 | |
| 6877029 | LEAK TEST FIXTURE CRTRIDGE VALVE | 1 | |
| 6877030 | DRILL FIXTURE FLANGE PIN | 1 | |
| 6877108 | ASSEMBLY FIXTURE ASSISTS REMOVAL OF CARTRIDGE VALVE FROM FUEL NOZZLE CARTRIDGE VALVE CAVITY USING AIR PRESSURE THROUGHTIP END. | 1 | |
| 6889888 | GEAR BOX/ENGINE LIFT FIXTURE | 4 | |
| 6895994 | COMPRESSOR DISCHARGE AIR TUBE PRESSURE TEST FIXTURE | 1 | |
| 6897106 | PRE QUALIFYING FIXTURE CARTRIDGE VALVE | 1 | |
| 6897107 | PRE QUALIFYING FIXTURE CARTRIDGE VALVE | 1 | |
| 6977602 | FLOW DIVIDER VALVE PREQUAL FIXTURE HOLDS CARTRIDGE VALVE DURING PREQUALIFYING TESTING. | 1 | |
| 83330794 | WELD FIXTURE GAUGE GUARD SWITCH | 2 | |
| 460007130 | TARGET SETTING FIXTURE | 1 | |
| 4920012417454 | FWD PRESSURE, FLUSH FIXTURE, STAGE 1 ROTOR | 1 | |
| 4920012417455 | FWD PRESSURE, FLUSH FIXTURE, STAGE 2 ROTOR | 1 | |
| 4920015155251 | FIXTURE - ALIGNMENT, ACCESSORY GEARBOX(856A3709G02) | 1 | |
| 834731-1 | CENTERING FIXTURE , 1ST & 2ND STAGE IMP | 1 | |
| 834949-1 | FIXTURE, 2ND STAGE STATOR | 1 | |
| 835088-1 | Gear Removal Fixture | 1 | |
| 8357901- | SWAGE FIXTURE | 1 | |
| 835807-1 | Gear Hub Assembly Fixture | 1 | |
| 835807-1A | Gear Holder Fixture | 1 | |
| 835975-1 | Swage fixture | 1 | |
| 835975-1PM | SWAGE FIXTURE | 1 | |
| 846-504-400 | FIXTURE – FAN RETAINING FLANGE | 1 | |
| 85237003-001-138/01 | FORCE GAUGE FIXTURE | 1 | |
| 85414001-001-58 | CHECKING FIXTURE, GEAR LUG REPL, MLG | 1 | |
| 85424001-001-58 | ALIGNMENT FIXTURE - MLG SENSOR/TARGET BRACKET | 1 | |
| 85424001-001-58-1 | ALIGNMENT FIXTURE - MLG SENSOR/TARGET BRACKET | 1 | |
| 856A 2411G01 | FIXTURE ASSEMBLY STAGE 2,3,4,5 NOZZLE SEGMENT | 1 | |
| 856A1026G02 | FIXTURE, LIFT - COMPRESSOR ROTOR, STAGE 4-9 SPOOL, AFT HPTR | 4 | |
| 856A1027 | FIXTURE, LIFT - COMPRESSOR ROTOR STAGE 3 DISK AND BLADES | 1 | |
| 856A1027 G01 | Lift Fixture - Compressor Rotor Stage 3 Disk and Blades | 10 | |
| 856A1027G01 | FIXTURE, LIFT - COMPRESSOR ROTOR STAGE 3 DISK AND BLADES | 10 | |
| 856A1028 | FIXTURE, LIFT - COMPRESSOR ROTOR STAGE 1-2 SPOOL, AFT AND STG 4-8 | 1 | |
| 856A1028G01 | Fixture, Lift - C/R Stage 1-2 Spool, Aft, and Stg 4-9 Spool, Fwd (lift fixture) | 10 | |
| 856A1029 | FIXTURE, LIFT - COMPRESSOR ROTOR STAGE 1-2 SPOOL, FORWARD | 1 | |
| 856A1029G01 | FIXTURE, LIFT - COMPRESSOR ROTOR STAGE 1-2 SPOOL, FORWARD | 1 | |
| 856A1029G02 | FIXTURE, LIFT - COMPRESSOR ROTOR STAGE 1-2 SPOOL, FORWARD | 2 | |
| 856A1044 | FIXTURE, CHILL - FORWARD FLANGE, STAGE 4-9 C/R SPOOL | 1 | |
| 856A1044G02 | Fixture, Chill - Fwd Flange, Stg 4-9 C/R Spool (chill fixture) | 4 | |
| 856A1044G07 | FIXTURE, CHILL FORWARD FLANGE, STG 4-9 SPOOL | 1 | |
| 856A1050 | FIXTURE, INSPECT SHIMMING INLET GEAR BOX | 1 | |
| 856A1050 G04 | FIXTURE, INSPECT SHIMMING INLET GEARBOX | 3 | |
| 856A1050G01 | FIXTURE, INSPECT SHIMMING INLET GEAR BOX | 1 | |
| 856A1050G02 | FIXTURE, INSPECT SHIMMING INLET GEAR BOX | 1 | |
| 856A1050G03 | FIXTURE, INSPECT SHIMMING INLET GEAR BOX | 1 | |
| 856A1050G04 | FIXTURE, INSPECT SHIMMING INLET GEAR | 3 | |
| 856A1050G05 | FIXTURE, INSPECT SHIMMING INLET GEARBOX | 1 | |
| 856A1053P01 | Fixture, Impingement Check - Lube Jet (impingement check fixture) | 4 | |
| 856A1053P03 | FIXTURE, IMPINGEMENT CHECK - LUBE JET (IMPINGEMENT CHECK FIXTURE) | 1 | |
| 856A1055G01 | FIXTURE SET GRIND SPACER C/S STAGE 4-9 LINERS | 1 | |
| 856A1062 | FIXTURE, CHILLING - HPTR FORWARD FLANGE, HORIZONTAL | 1 | |
| 856A1062G01 | FIXTURE, CHILLING - HPTR FWD FLANGE, HORIZ | 1 | |
| 856A1062G02 | FIXTURE, CHILLING - HPTR FORWARD FLANGE, HORIZONTAL | 2 | |
| 856A1062G03 | FIXTURE, CHILLING - HPTR FWD FLANGE, | 6 | |
| 856A1076G01 | FIXTURE, CHILLING - HPTR DISK FLANGES | 6 | |
| 856A1125G01 | FIXTURE, LIFT-CG ADJUSTABLE, GENERAL PURPOSE | 5 | |
| 856A1157 | FIXTURE, LIFT-VARIABLE C G GEN. PURPOSE, HEAVY | 1 | |
| 856A1157 G01 | Fixture Lift ‐ Variable CG General Purpose | 5 | |
| 856A1157 G02 | FIXTURE, LIFT - VARIABLE CG GENERAL PURPOSE, HEAVY | 8 | |
| 856A1157 REV J | FIXTURE, LIFT-VARIABLE C G GEN. PURPOSE, HEAVY | 1 | |
| 856A1157G01 | FIXTURE, LIFT-VARIABLE C G GEN. PURPOSE, HEAVY | 5 | |
| 856A1157G02 | Fixture, Lift - Variable CG General Purpose, Heavy (CG lift fixture) | 8 | |
| 856A1195 | FIXTURE, ASSEMBLY - HPC ROTOR STAGE 1 AND 2 SPOOL TO FWD SHAFT | 1 | |
| 856A1195G02 | FIXTURE, ASSEMBLY - HPC ROTOR STAGE 1 AND 2 SPOOL TO FWD SHAFT | 4 | |
| 856A1196 | FIXTURE, VERT LIFT & TURN COMBUSTION CASE ASSY - FWD FLANGE | 1 | |
| 856A1196G02 | FIXTURE, LIFT AND TURN - COMBUSTION ASSEMBLY, FORWARD FLANGE | 4 | |
| 856A1196G03 | FIXTURE, VERT LIFT & TURN COMBUSTION CASE ASY-FWD FLANGE | 5 | |
| 856A1211 | FIXTURE, CLAMPING-NO.3 BRG. ASSY. INLET GEARBOX | 1 | |
| 856A1211 REV B | FIXTURE, CLAMPING-NO.3 BRG. ASSY. INLET GEARBOX | 1 | |
| 856A1211G01 | Fixture, Clamping - No. 3 Bearing Assembly, Inlet Gearbox (clamping fixture) | 9 | |
| 856A1212 G01 | Fixture, Compressor Rotor Blade Length Gage | 1 | |
| 856A1212G09 | FIXTURE, COMPRESSOR ROTOR BLADE LENGTH GAGE | 1 | |
| 856A1212G10 | LENGTH GAGE FIXTURE | 1 | |
| 856A1212G11 | FIXTURE, BLADE LENGTH GAGE | 6 | |
| 856A1291 | FIXTURE, INSTALL & REMOVE - INLET GEAR - BOX MODULE | 1 | |
| 856A1291 G05 | FIXTURE, INSTALL & REMOVE - INLET GEARBOX MODULE | 1 | |
| 856A1291 G06 | Fixture Install and Remove ‐ Inlet Gearbox | 3 | |
| 856A1291G01 | FIXTURE, INSTALL & REMOVE - INLET GEAR - BOX MODULE | 1 | |
| 856A1291G02 | FIXTURE, INSTALL & REMOVE - INLET GEAR - BOX MODULE | 1 | |
| 856A1291G03 | FIXTURE, INSTALL & REMOVE - INLET GEAR - BOX MODULE | 1 | |
| 856A1291G04 | FIXTURE, INSTALL & REMOVE - INLET GEAR - BOX MODULE | 1 | |
| 856A1291G05 | FIXTURE, INSTALL & REMOVE - INLET GEARBOX MODULE | 1 | |
| 856A1291G06 | FIXTURE, INSTALL & REMOVE - INLET GEAR - BOX MODULE | 3 | |
| 856A1291G07 | FIXTURE, INSTALL & REMOVE - INLET GEAR - BOX MODULE | 1 | |
| 856A1291G08 | FIXTURE, INSTALL AND REMOVE-INLET GEARBOX MODULE | 8 | |
| 856A1291G09 | FIXTURE, INSTALL AND REMOVE - INLET GEARBOX MODULE (INSTALL AND REMOVE FIXTURE) | 4 | |
| 856A1291G10 | FIXTURE, INSTALL & REMOVE - INLET GEAR - BOX MODULE | 7 | |
| 856A1291G35 | FIXTURE, INSTALL AND REMOVE - INLET GEARBOX MODULE | 1 | |
| 856A1291P34 | Gear/Fixture IGB Model I/R | 1 | |
| 856A1291P35 | FIXTURE, INSTALL AND REMOVE - INLET GEARBOX MODULE | 3 | |
| 856A1356G02 | Fixture, Lift - HPCR Stage 1-2 Spool, Forward (lift fixture) | 5 | |
| 856A1369 | FIXTURE, ADAPTER LINI- GAGE- DATA ACQUISITION SYST | 1 | |
| 856A1369 G04 | FIXTURE, ADAPTER LINI-GAGE - DATA ACQUISITION SYSTEM G01 | 5 | |
| 856A1369G01 | FIXTURE ADAPTER, LINI-GAGE - DATA | 1 | |
| 856A1369G02 | FIXTURE, ADAPTER LINI-GAGE-DATA ACQUISITION SYSTEM | 1 | |
| 856A1369G04 | FIXTURE, ADAPTER LINI-GAGE-DATA ACQUISITION SYSTEM | 5 | |
| 856A1392G03 | Fixture, Pusher-HPC FWD Shaft/IGB Bevel Gear Shaft | 3 | |
| 856A1394 | FIXTURE, LIFT - C G ADJUSTABLE, GENERAL PURPOSE | 1 | |
| 856A1394 G03 | FIXTURE, LIFT-CG ADJUSTABLE, GENERAL PURPOSE | 11 | |
| 856A1394G01 | FIXTURE - LIFT ADJ C/G GEN PURPOSE | 2 | |
| 856A1394G02 | FIXTURE - LIFT ADJ C/G GEN PURPOSE | 3 | |
| 856A1394G03 | Fixture, Lift-CG Adjustable, General Purpose (CG lift fixture) | 11 | |
| 856A1394G03 | FIXTURE - LIFT ADJ C/G GEN PURPOSE | 11 | |
| 856A1396G01 | FIXTURE BUILD-UP LPT STAGE 1 NOZZLE | 3 | |
| 856A1412G06 | FIXTURE, ASSEMBLY/ DISASSEMBLY - HPT NOZZLE, STAGE 1 (FIXTURE) | 6 | |
| 856A1416G02 | FIXTURE, BUILDUP - HP TURBINE SHROUD/LP STAGE 1 NOZZLE (BUILDUP FIXTURE) | 2 | |
| 856A1416G03 | Fixture, Buildup - HP Turbine Shroud/LP Stage 1 Nozzle (buildup fixture) | 6 | |
| 856A1495G01 | FIXTURE, INSPECTION - NO. 3 BEARING RACE/CAGE CLEARANCE | 1 | |
| 856A1812G01 | FIXTURE, ASSEMBLY/DISASSEMBLY - HPT NOZZLE, STAGE 1 (FIXTURE) | 1 | |
| 856A1812G02 | Fixture, Assembly/ Disassembly - HPT Nozzle, Stage 1 (fixture) | 8 | |
| 856A2008 | GEARBOX LIFT FIXTURE | 1 | |
| 856A2384G01 | FIXTURE, REMOVAL/INSTALLATION - LPT BLADES STAGES 1 AND 5 (REMOVAL/INSTALLATION FIXTURE | 1 | |
| 856A2387G02 | FIXTURE,TURNNION-LPT.CONICAL ROTOR SUPPORT & STAGE 4DISK ASSEM | 1 | |
| 856A2416 | CHECKING FIXTURE - INTMD FLANGE | 1 | |
| 856A2618G04 | FIXTURE, INSTALL AND REMOVE - INLET GEARBOX MODULE | 11 | |
| 856A2733 | FIXTURE, LOCK HORZ GEAR | 1 | |
| 856A2733G03 | FIXTUJE, LOCKING - HORIZONTAL BEVET GEAR (LOCKING FIXTURE) | 3 | |
| 856A2733G04 | HORIZONTAL LOCKING FIXTURE - BEVEL GEAR TGB | 1 | |
| 856A2739 | FIXTURE, LOCK INPUT GEAR | 1 | |
| 856A2739G03 | Fixture, Locking - Input Bevel Gear (locking fixture) | 3 | |
| 856A2748G03 | FIXTURE, CHECKING, BACKLASH- TGB, DUO BEVEL GEARS | 4 | |
| 856A2750G01 | Fixture LPT BLD Stage 1 - 4 | 1 | |
| 856A2750G02 | Fixture - LPT Blades, Stages 1-4 (fixture) | 5 | |
| 856A2798 | LOCKING FIXTURE AND SOCKET - AGB 31/71-TOOTH GEARSHAFT BALL BEARING NUT LOCKING (FIXTURE AND SOCKET) | 1 | |
| 856A2798G01 | LOCKING FIXTURE AND SOCKET- AGB 31/71-TOOTH GEARSHAFT BALL BEARING NUT | 5 | |
| 856A2873G01 | INSTALLATION FIXTURE - OIL DISTRIBUTOR GEAR 61 TOOTH | 2 | |
| 856A2976G02 | Fixture, Assembly/Disassembly - LPT Nozzle Segments, Stage 3 (fixture) | 5 | |
| 856A3193G01 | Fixture Assy/Dis Assy No3 Gearshaft | 1 | |
| 856A3294G01 | Fixture, locking Starter Bevel Gear | 1 | |
| 856A3426G01 | FIXTURE ASSEMBLY/DISASSEMBLY LPT BLADES STAGES 1-4 | 5 | |
| 856A3545G03 | FIXTURE ACCESSORY GEARBOX | 9 | |
| 856A3546 | Fixture, Checking Backlash - TGB Bevel Gear | 1 | |
| 856A3546G01 | FIXTURE, CHECKING. BACKLASH - TGB BEVEL GEAR DUO | 1 | |
| 856A3546G02 | FIXTURE, CHECKING. BACKLASH - TGB BEVEL GEAR DUO | 1 | |
| 856A3546G03 | FIXTURE, CHECKING. BACKLASH - TGB BEVEL GEAR DUO | 1 | |
| 856A3546G04 | FIXTURE, CHECKING. BACKLASH - TGB BEVEL GEAR DUO | 1 | |
| 856A3546G05 | FIXTURE, CHECKING. BACKLASH - TGB BEVEL GEAR DUO | 1 | |
| 856A3546G06 | Fixture Check Backlash Duo Bevel Gear TGB | 4 | |
| 856A3546G07 | FIXTURE, CHECKING. BACKLASH - TGB BEVEL GEAR DUO | 1 | |
| 856A3553 G03 | Fixture Locking ‐ Horizontal and Input Bevel Gear | 1 | |
| 856A3709G01 | FIXTURE - ALIGNMENT, ACCESSORY GEARBOX | 5 | |
| 856A3709G02 | FIXTURE - ALIGNMENT, ACCESSORY GEARBOX | 11 | |
| 856A3709G03 | ACCESSORY GEARBOX ALIGNMENT FIXTURE | 7 | |
| 856A3752 | FIXTURE, REMOVAL - STAGE 1-2-3 OUTER STATIONARY AIR SEAL (FIXTURE) | 1 | |
| 856A3752 G04 | Removal Fixture - Stage 1, 2 and 3 Outer Sta Air Seal | 8 | |
| 856A3752G02 | Fixture, Remove Stage 1-2-3 Outer Stat Air Seal | 1 | |
| 856A3752G04 | Fixture, Removal - Stage 1-2-3 Outer Stationary Air Seal (fixture) | 8 | |
| 856A3756 | FIXTURE, INSTALLATION - SHIELD, STAGE 2 (FIXTURE) | 1 | |
| 856A3756G01 | Fixture Install LPT Stage 2 Shield | 5 | |
| 856A3756G02 | INSTALLATION FIXTURE - SHIELD LPT STAGE 2 | 5 | |
| 856A3757 | FIXTURE, INSTALLATION - SHIELD, STAGE 3 (FIXTURE) | 1 | |
| 856A3757002 | FIXTURE INSTALLATION - SHIELD, STAGE 3 (FIXTURE) | 1 | |
| 856A3757G01 | Fixture, Install LPT Stage 3 Shield | 1 | |
| 856A3757G02 | Fixture, Installation - Shield, Stage 3 (fixture) | 5 | |
| 856A3757G03 | FIXTURE, INSTALLATION SHIELD LPT STAGE 3 | 4 | |
| 856A3760 | FIXTURE STAGE 2 | 1 | |
| 856A3760G01 | Fixture Assy/Disassy LPT Nozzle Segments Stage 2 | 1 | |
| 856A3760G03 | FIXTURE, ASSEMBLY/DISASSEMBLY - LPT NOZZLE SEGMENTS, STAGE 2 (FIXTURE) | 1 | |
| 856A3760G04 | Fixture, Assembly/Disassembly - LPT Nozzle Segments, Stage 2 (fixture) | 2 | |
| 856A3760G05 | FIXTURE, ASSEMBLY/DISASSEMBLY - LPT NOZZLE SEGMENTS, STAGE 2 | 4 | |
| 856A3763 | FIXTURE STAGE 3 | 1 | |
| 856A3763G03 | Fixture, Assembly/Disassembly - LPT Nozzle Segments, Stage 3 (fixture) | 6 | |
| 856A3781G02 | FIXTURE - ADJUSTMENT, VBV DOOR (CFM INTERNATIONAL INC. - GE SUPPORT SERVICES) | 7 | |
| 856A3855 | FIXTURE GEARBOX | 1 | |
| 856A3908 | FIXTURE BUILD-UP LPT STAGE | 1 | |
| 856A3908G02 | FIXTURE BUILD-UP LPT STAGE | 8 | |
| 856A3950G01 | CARTRIDGE - FILM, RECONDITIONING FIXTURE, FAN FRAME ABRADABLE | 1 | |
| 856A4044G01 | FIXTURE MACHINING COMPRESSOR ROTOR SPOOL, STAGE4 THRU STAGE 9 | 1 | |
| 856A4142G01 | FIXTURE, GRINDING- INNER TRUNNION, IGV, STAGE 1-3 STATOR VANE | 1 | |
| 856A4604G01 | FIXTURE, CHECKING - LPT STAGE 1 BLADE NOT ESSENTIAL TO START | 1 | |
| 856A4604G02 | FIXTURE, CHECKING - LPT STAGE 1 BLADE | 1 | |
| 856A4605G01 | FIXTURE, CHECKING - LPT STAGE 2 BLADE | 2 | |
| 856A4606G01 | FIXTURE, CHECKING - LPT STAGE 3 BLADE | 2 | |
| 856A5505G04 | STAGE 1 LPT BLADE (OLD CONFIGURATION) (CHECKING FIXTURE) | 1 | |
| 856A5505G06 | STAGE 1 LPT BLADE (NEW CONFIGURATION) (CHECKING FIXTURE) | 1 | |
| 856A5505G07 | STAGE 1 LPT BLADE (NEW CONFIGURATION) (CHECKING FIXTURE) | 1 | |
| 856A5506G04 | STAGE 2 LPT BLADE (CHECKING FIXTURE) | 1 | |
| 856A5507G04 | STAGE 3 LPT BLADES (CHECKING FIXTURE) | 2 | |
| 856A5508G04 | FIXTURE CHECKING STAGE 4 LPT BLADE | 2 | |
| 856A5513G05 | FIXTURE, GRIND OR CHECK – STAGE 1 LPT BLADE CONCAVE SIDE (CONFIGS. 2 AND 3) | 2 | |
| 856A5513G06 | FIXTURE GRIND OR CHECK CONCAVE SIDE LPT BLADE STAGE 1 | 3 | |
| 856A5556G01 | STAGE 1-4 LPT BLADE TWIST ANGLE CHECK (CONF.2 AND 3) (HOLDING FIXTURE) | 1 | |
| 856A5556G02 | FIXTURE HOLDING TWIST ANGLE CHECK LPT BLADES STAGE 1-4 | 3 | |
| 856A5655 G01 | Checking Fixture tilt angle to Stage 2 Outer | 2 | |
| 856A5655G01 | FIXTURE CHECK TILT ANGLE STAGE 2 OUTER STATIONARY AIR SEAL | 2 | |
| 856A5656 G01 | Checking Fixture tilt angle to Stage 3 Outer | 1 | |
| 856A5656G01 | FIXTURE CHECK TILT ANGLE STAGE 3 OUTER STATIONARY AIR SEAL | 1 | |
| 856A5678G01 | HOLDING FIXTURE STAGE 2OUTE | 1 | |
| 856A5679G01 | HOLDING FIXTURE STAGE 3 OUT | 1 | |
| 856A5904G01 | Lift and Turn Fixture (GAGE ??) | 1 | |
| 856A5905G01 | FIXTURE, CHECKING - LPT STAGE 2 BLADE (CHECKING FIXTURE) NOT ESSENTIAL TO START | 1 | |
| 856A5906G01 | FIXTURE, CHECKING - LPT STAGE 3 BLADE (CHECKING FIXTURE) NOT ESSENTIAL TO START | 1 | |
| 856A5907G01 | FIXTURE, CHECKING - LPT B STAGE 4 BLADE | 1 | |
| 856A5944 | FIXTURE, ALIGNMENT - LPT SHAFT (TOOL GAGE) | 1 | |
| 856A5944G01 | FIXTURE, ALIGNMENT - LPT SHAFT (TOOL GAGE) | 2 | |
| 856A6705G01 | FIXTURE, CHECKING - BLADE STAGE 1, LPT | 1 | |
| 856A6706G01 | FIXTURE, CHECKING - STAGE 2, LPT | 1 | |
| 856A6707G01 | FIXTURE, CHECKING - STAGE 3, LPT | 1 | |
| 856A6708G01 | FIXTURE, CHECKING - STAGE 4, LPT | 1 | |
| 856A6749G01 | FIXTURE AIR FLOW GAUGE | 1 | |
| 856A6751G01 | FIXTURE DRILLING STAGE 1 | 1 | |
| 856A6754G06 | FIXTURE, RESTORING PRETWIST ANGLE - LPT BLADES STAGE 1 THRU 4 | 1 | |
| 856AI062 | FIXTURE CHILLING HPTR FWD FLANGE HORIZONTAL | 1 | |
| 856AI2II | FIXTURE, CLAMPING-NO.3 BRG. ASSY. INLET GEARBOX | 1 | |
| 856AII57 | FIXTURE, LIFT-VARIABLE C G GEN. PURPOSE, HEAVY | 1 | |
| 8C2134 | FIXTURE, ADAPTER - GENSPECT (AFT END DOWN) | 1 | |
| 8C2139 | FIXTURE, LIFT / TURN - HPCR DISK STAGE 2, 5, 8 | 1 | |
| 8C2176 | FIXTURE - INSTALL - EXTENSION CASE MID FLANGE BOLTS (FOR PRODUCTION ONLY) | 1 | |
| 8C2193 | FIXTURE, COUNTER TORQUE / AXIALLY RESTRAIN - HPCR STAGE 9 BOLTS | 1 | |
| 8C2583 | FIXTURE, BUILD & INSTALL/REMOVE - ACCESSORY GEARBOX | 1 | |
| 8C2587 | TOOL SET, LIFTING FIXTURE - ACCESSORY GEARBOX | 1 | |
| 8C2724 | FIXTURE, INSTALL - STG 1 AND 2 HANGER/SUPPORT STATOR CASE | 1 | |
| 8C2734 | FIXTURE, LIFT & TURN – HORIZ / VERT HPT NOZZLE ASSY STAGE 2 | 1 | |
| 8C2769 | FIXTURE - INDIVIDUAL INSTALL - STG 1 AND 2 HANGER / SUPPORT STATOR CASE | 1 | |
| 8C2916 | FIXTURE - LIFT - BALLS & CAGE - NO 2 BRG | 1 | |
| 8C3134 | FIXTURE - BUILD UP- LPT NOZZLE - STAGE 3 & STAGE 5 | 1 | |
| 8C3193 | FIXTURE - RESTRAINING - LPT STAGE 3 INTERSTAGE SEAL | 1 | |
| 8C3262 | FIXTURE - STORAGE - FAN HUB FRAME | 1 | |
| 8C3638 | FIXTURE - SHAFT - IGBX - GEARSHAFT - HORIZONTAL | 1 | |
| 916482-1-1 | LEAKAGE FIXTURE SET | 1 | |
| 9429M18 | CART - STORAGE-BUILDUP FIXTURE-NOZZLE - STG 1-HPT | 1 | |
| 9429M19 | FIXTURE - LIFT - UNIVERSAL FLANGE - VERTICAL | 1 | |
| 9429M49G01 | FIXTURE, PULLER BHGE 9429M49G01 АЩК EXHAUST GAS TEMPERATURE PROBE -- (ALTERNATE FOR 2C14898) USED IN WP 1711 00 | 4 | |
| 9441M34 | FIXTURE-BACKLASH CHK. RADIAL BEVEL GEAR | 1 | |
| 9441M34 REV E | FIXTURE-BACKLASH CHK. RADIAL BEVEL GEAR | 1 | |
| 9441M43 | FIXTURE, ASSY. BRGS. TO GEARS | 1 | |
| 9441M43 REV C | FIXTURE, ASSY. BRGS. TO GEARS | 1 | |
| 9446M57 | FIXTURE, RAISE/LOWER - ACCESSORY GEARBOX MODULE FIXTURE | 1 | |
| 9446M57P03 | RAISE / LOWER FIXTURE (GENX-2B) | 1 | |
| 9446M76G01 | FIXTURE, CHILL DAM, LIQ NITROGEN | 2 | |
| 9446M78G01 | FIXTURE, CHILL PLATE. LIQ NITROGEN | 1 | |
| 9446M95 | FIXTURE, LIFT ARM - GENERAL PURPOSE | 1 | |
| 9461M12G01 | FIXTURE, TORQUE LOADING - TRANSFER & INLET GEARBOX | 1 | |
| 9471M24 | FIXTURE, LIFT AND TURN - GENERAL PURPOSE | 1 | |
| 9471M24G01 | FIXTURE, LIFT AND TURN - GENERAL PURPOSE | 1 | |
| 9471M25 | FIXTURE, LIFT AND TURN - GENERAL PURPOSE | 1 | |
| 9471M26G01 | FIXTURE, RAISE/LOWER ACCESSORY GEARBOX MODULE | 1 | |
| 9480M04 | FIXTURE, BACKLASH - TRANSFER GEARBOX | 1 | |
| 9480M78G01 | FIXTURE, BACKLASH – HORIZONTAL & RADIAL BEVEL GEARS, INLET GEARBOX | 1 | |
| 9485M28 | FIXTURE, PRESSURE TEST - ACCESSORY GEARBOX | 1 | |
| 956A1030 | FIXTURE - CHILL-HPT BLADE RETAINER - STAGE 2 | 1 | |
| 956A1042 | FIXTURE - SEPARATION - INTERSTAGE SEAL/BLADE RETAINER | 1 | |
| 956A1042G01 | Fixture,separation-interstage seal/blade retainer | 1 | |
| 956A1070 | FIXTURE - INSTALL - BLADE RETAINER - STAGE 1 | 1 | |
| 956A1070G01 | Fixture,install-blade retainer,stage 1 | 1 | |
| 956A1098 | FIXTURE - LEAKAGE TEST-CARBON SEAL - N0 4. BEARING | 1 | |
| 956A1102 | FIXTURE - SUPPORT - HPC ROTOR ASSEMBLY (GENSPECT) | 1 | |
| 956A1185 | FIXTURE - ASSY ADAPTER - GENSPEC HPCR/HPTR | 1 | |
| 956A1186 | FIXTURE - SUPPORT - HPC/HPT ROTOR ASSY (GENSPECT) | 1 | |
| 956A1205 | FIXTURE - LIFT - STAGE 1 HPT NOZZLE ASSY | 1 | |
| 956A1215 | FIXTURE - INSTALL - STG 1 HANGER/SUPPORT STATOR CASE | 1 | |
| 956A1230 | FIXTURE - REMOVAL - STAGE 2 SHROUD/HANGER | 1 | |
| 956A1249 | FIXTURE - VERTICAL STORAGE - CORE MODULE | 1 | |
| 956A1254 | FIXTURE - GRIND-STAGE 1 & 2 HPT SHROUDS & STAGE 2 HPT NOZZLES | 1 | |
| 956A1261 | FIXTURE - REMOVAL - STAGE 1 HPT SHROUD HANGERS | 1 | |
| 956A1277 | FIXTURE - INSTALL - STG 1 HANGER - SUPPORT STATOR CASE | 1 | |
| 956A1297 | FIXTURE - GRIND - STAGE 1 AND 2 HPT SHROUDS AND STAGE 2 HPT NOZZLES | 1 | |
| 956A1315 | FIXTURE - SEATING CHECK - CORE MODULE TO INLET GEAR BOX | 1 | |
| 956A1322 | FIXTURE - LIFT-ADJUSTABLE CG - GENERAL PURPOSE | 1 | |
| 956A1523 | FIXTURE - TORQUE - LOCKNUT - RADIAL BEVEL GEAR | 1 | |
| 956A1560 | FIXTURE - SHIPPING - INLET GEAR BOX | 1 | |
| 956A1806 | FIXTURE - RESTRAINING - HPCR STAGE 6-10 SPOOL | 1 | |
| 956A3027 | FIXTURE - CHILL - STAGE 1 HPT DISK/FWD FLANGE | 1 | |
| 956A3089 | FIXTURE - LEAKAGE CHECK - C SUMP | 1 | |
| 956A3093 | FIXTURE - LEAKAGE TEST - CARBON SEAL - NO. 4 BEARING | 1 | |
| 956A3122 | FIXTURE - TORQUE - HPCR STAGE 2 | 1 | |
| 956A3215 | FIXTUREM INSTALL - STG 1 HANGER/SUPPORT HPT STATOR CASE | 1 | |
| 956A3219 | FIXTURE - BUILDUP - STG 2 SHROUD HANGER ASSY | 1 | |
| 956A3230 | FIXTURE - REMOVAL - STG 2 HPT SHROUD / HANGER SUB ASSY | 1 | |
| 956A3249 | FIXTURE - GRIND - STAGE 1 AND 2 HPT SHROUDS AND STAGE 2 HPT NOZZLES | 1 | |
| 956A3277 | FIXTURE - INSTALL - STG 1 HANGER - SUPPORT STATOR CASE | 1 | |
| 956A3295 | FIXTURE - GRIND - STAGE 1 AND 2 HPT SHROUDS AND STAGE 2 HPT NOZZLES | 1 | |
| 956A3297 | FIXTURE - GRIND - STAGE 1 AND 2 HPT SHROUDS AND STAGE 2 HPT NOZZLES | 1 | |
| 956A3500 | FIXTURE - HEATING-INLET GEARBOX | 1 | |
| 956A3533 | FIXTURE - BUILD - HORIZ BEVEL GEAR | 1 | |
| 956A3559 | FIXTURE - GUAGE - NO 3 BRG | 1 | |
| 956A6017 | FIXTURE - LIFTING - TRANSFER GEAR BOX | 1 | |
| 956A6021 | TRANSFER-GEARBOX PISTON-RING-INSTALLATION FIXTURE | 1 | |
| 956A6021G01 | TRANSFER-GEARBOX PISTON-RING-INSTALLATION FIXTURE | 1 | |
| 956A6112 | FIXTURE - LIFT - VANE LPC STAGE 4 | 1 | |
| 956A6146 | FIXTURE - TORQUE WRENCH - STAGE 4 BOOSTER | 1 | |
| 956A6217 | FIXTURE - LOCKING - BEVEL GEAR | 1 | |
| 956A6221 | FIXTURE - LOCKING - BEVEL GEAR | 1 | |
| 956A6229 | FIXTURE - LOCKING - BEVEL GEAR | 1 | |
| 956A6260 | FIXTURE - LOCKING - SPUR GEAR | 1 | |
| 956A6358 | FIXTURE - GAUGE RING BALANCING - LPT | 1 | |
| 956A6404 | FIXTURE - LIFT/TURN - LPT ASSY DISK STAGE 1 TO 7 | 1 | |
| 956A6452 | FIXTURE - REMOVAL - LPT BLADE STAGE 7 | 1 | |
| 956A6466 | FIXTURE - DISASSY-LPT SEAL RING STAGE 2-3 | 1 | |
| 956A6468 | FIXTURE - ALIGNMENT - SHROUD -LPT STAGE 1 | 1 | |
| 956A6499 | FIXTURE - ASSEMBLY/DISASSEMBLY - LPT NOZZLE STAGE 2 | 1 | |
| 956A6501 | FIXTURE - ASSEMBLY/DISASSEMBLY - LPT NOZZLE STAGE 3 | 1 | |
| 956A6503 | FIXTURE - ASSEMBLY/DISASSEMBLY - LPT NOZZLE STAGE 4 | 1 | |
| 956A6505 | FIXTURE - ASSEMBLY/DISASSEMBLY - LPT NOZZLE STAGE 5 | 1 | |
| 956A6509 | FIXTURE - ASSEMBLY/DISASSEMBLY - LPT NOZZLE STAGE 6 | 1 | |
| 956A6511 | FIXTURE - ASSEMBLY/DISASSEMBLY - LPT NOZZLE STAGE 7 | 1 | |
| 956A6533 | FIXTURE - RESTRAINER - LPT BLADES STAGE 2-3 | 1 | |
| 956A6545 | FIXTURE - CLEARANCE CHECK - LPT BLADES STAGE 7 | 1 | |
| 956A6568 | FIXTURE - PULLER - TRF - OIL SCAVENGE | 1 | |
| 956A6571 | FIXTURE - STORAGE SUPPORT - LPT REAR FRAME | 1 | |
| 956A6603 | FIXTURE -INSTALL - ACCESSORY GEARBOX | 1 | |
| 956A6627 | FIXTURE - RANGE CONTROL - ENGINE ASSEMBLY | 1 | |
| 956A6627G02 | RANGE CONTROL FIXTURE ENGINE ASSEMBLY | 1 | |
| 956A6828 | FIXTURE LEAKAGE TEST - BEARING SUPPORT 1/2 | 1 | |
| 956A7009 | FIXTURE - MANUAL ORIENTATION - RADIAL SHAFT - TRANSFER GEARBOX | 1 | |
| 956A7010 | FIXTURE - PREPARATION - TRANSFER GEAR BOX | 1 | |
| 956A7018 | FIXTURE, REMOVE/INSTALL - ACCESSORY GEARBOX | 1 | |
| 956A7403 | FIXTURE - RESTRAIN-SQUARE HEAD BOLT STAGE 4 | 1 | |
| 956A7601 | FIXTURE - ASSEMBLY STAND - ACCESSORY GEARBOX | 1 | |
| 956A7602 | FIXTURE - LIFT - ACCESSORY GEARBOX | 1 | |
| 956A7607 | FIXTURE - LIFT BAR-ACCESSORY GEARBOX | 1 | |
| 956A7639 | FIXTURE - REMOVAL - INLET DRIVE GENERATOR | 1 | |
| 956A7639G01 | INLET DRIVE GENERATOR REMOVAL FIXTURE 1 | 1 | |
| 956A8044 | FIXTURE - LIFT AND TURN - TRANSFER GEAR BOX | 1 | |
| 956A8087 | FIXTURE - RADIAL WRENCH - VANE LPC - STAGE 4 | 1 | |
| 956A8134 | FIXTURE - LIFTING - FAN BOOSTER - STAGE 4 | 1 | |
| 956A8145 | FIXTURE - TORQUING-INLET GEAR BOX | 1 | |
| 956A8152 | FIXTURE - WRENCH - VANE LPC-STAGE 4 | 1 | |
| 956A8329 | FIXTURE, SLIDE HAMMER - LPT DISK STG 1 OUTILLAGE, EXTRACTEUR INERTIEL DISQUE TBP ETG 1 | 1 | |
| 956A8401 | FIXTURE - RESTRAIN DISK - LPT STAGE 4 | 1 | |
| 956A8408 | FIXTURE - INDEXING - TIGHTENING WRENCH- DISK - LPT STAGE 3/4 | 1 | |
| 956A8449 | FIXTURE - SUPPORT -RING RETAINER STAGE 1 | 1 | |
| 956A8553 | FIXTURE - RESTRAIN-SQUARE HEAD BOLT STAGE 2 | 1 | |
| 956A8592 | FIXTURE - LIFT & TURN - LPT NOZZLE STAGE 1 | 1 | |
| 956A8594 | FIXTURE - LIFT - SHROUD - LPT NOZZLE STAGE 1 | 1 | |
| 956A8598 | FIXTURE - RESTRAIN - SHROUD - LPT NOZZLE STAGE 1 | 1 | |
| 956A8658 | DOLLY - STORAGE - FIXTURE VARIABLE CG - LPT | 1 | |
| 956A8687 | DOLLY - STORAGE - LPT REAR FRAME LIFTING FIXTURE | 1 | |
| 956A8826 | FIXTURE - LEAKAGE TEST - BEARING SUPPORT 1/2 | 1 | |
| 956A8927 | FIXTURE - BACKLASH - BEVEL GEAR - TGB | 1 | |
| 956A8979 | FIXTURE - BACKLASH - BEVEL GEAR -AGB | 1 | |
| 96400-0-2000 | Gear Press Fixture | 1 | |
| 96400-0-2000 PM | GEAR PRESS FIXTURE | 1 | |
| 98A27208442000 | FIXTURE HINGE ARMS SERVOCONTROLS | 3 | |
| 98A27407530000 | FIXTURE-HINGE ARMS AND SERVO CONTROLS, RUDDER | 6 | |
| 9C1004 | FIXTURE, INST/REM STAGE 2 | 1 | |
| 9C1035 | FIXTURE - INSTALL - STG 1 HANGE | 1 | |
| 9C1115G03 | FIXTURE ASSEMBLY BHGE 9C1115G03, HORIZONTAL LIFT, SUPER CORE/WITHOUT MINIBASE (BAKER HUGHES) | 1 | |
| 9C1165G01 | FIXTURE - POSITION, AFT ENAINE MOUNT,GE90 | 3 | |
| 9C1165G02 | SPL-7749 FIXTURE - POSITION, AFT ENGINE MOUNT, GE90-115B | 3 | |
| 9C1172G03 | FIXTURE,INSTALL/REMOVE-ACCESSORY GEARBOX MODULE | 1 | |
| 9C1173G02 | FIXTURE - RAISE/LOWER, ACCESSORY GEARBOX MODULE | 1 | |
| 9C1236 | FIXTURE,CHILL-FWD FLANGE | 1 | |
| 9C1286G02 | FIXTURE, LIFT & TURN - STAGES 1-6 LPT DISKS | 1 | |
| 9C1310 | FIXTURE, INSTALL/REMOVE STAGE | 1 | |
| 9C1379G01 | FIXTURE,LIFT ENG GE90 | 1 | |
| 9C1385G02 | FIXTURE - RAISE/LOWER, ACCESSORY GEARBOX MODULE | 1 | |
| 9C1433 | FIXTURE, RESTRAINING-LPT STAGE 3 INTERSTAGE SEAL | 1 | |
| 9C1434 | FIXTURE, RESTRAINING-LPT STAGE 4 INTERSTAGE SEAL | 1 | |
| 9C1436 | FIXTURE, RESTRAINING-SEAL, PLT ROTOR STGE 2 | 1 | |
| 9C1438 | FIXTURE, RESTRAINING-LPT STAGE 5 INTERSTAGE SEAL | 1 | |
| 9C3003 | FIXTURE, LIFT-LPT NOZZLE STAGE 2 & SYAGE 3 | 1 | |
| 9C3004 | FIXTURE, BUILD UP-LPT NOZZLE, STAGE 1 & STAGE 3 | 1 | |
| 9C3008 | FIXTURE, EXTENSION-DISK, HP TURBINE STAGE 1 | 1 | |
| 9C3039G01 | FIXTURE - FAN CASE RUNOUT (GE90-115B) | 1 | |
| 9C3043 | FIXTURE, CLAMP-HPT ROTOR STAGE 1 BLADES | 1 | |
| 9C3060 | FIXTURE, RESTRAINING-LPT STAGE 6 INTERSTAGE SEAL | 1 | |
| 9C3066 | FIXTURE, RESTRAINING-OGV STAGE 9 | 1 | |
| 9C3123G02 | FIXTURE, LIFT - STAGE 6 LPT DISK - VERTICAL (LIFT FIXTURE) | 1 | |
| 9C3124G01 | FIXTURE, INSPECTION - STAGE 6 LPT BLADES (STAGE 6 LPT BLADE INSPECTION TOOL) | 1 | |
| 9C3124G03 | FIXTURE, INSPECTION - STAGE 6 LPT BLADES (STAGE 6 LPT BLADE INSPECTION TOOL) | 2 | |
| 9C6003P01 | FIXTURE - SHIPPING, FAN STATOR MODULE, GE90-70/80/90 AND -100 SERIES ENGINES | 1 | |
| 9C6003P01-PPK | FAN STATOR SHIP FIXTURE, GE90 | 1 | |
| 9C6016 | STABILIZE FIXTURE - FORWARD ENGINE MOUNT, ALL GE90 ENGINES | 1 | |
| 9C6016G01 | STABILIZE FIXTURE - FORWARD ENGINE MOUNT, ALL GE90 ENGINES | 3 | |
| 9C6020G06 | SLING - ENGINE GE90 (FIXTURE) | 4 | |
| 9C6030P01 | FIXTURE, SEPARATION - FAN CASE GE90-70/80/90 AND GE90-100 SERIES | 3 | |
| 9MIT65B01211 | ASSEMBLY FIXTURE - SHOCK STRUT, WING LANDING GEAR, BODY LANDING GEAR AND NOSE LANDING GEAR | 2 | |
| 9R7066G02 | FIXTURE MACHINING-STAGE 1 FAN CASE SHROUD (GRIND TOOL) | 1 | |
| 9R7066G03 | FIXTURE MACHINING-STAGE 1 FAN CASE SHROUD (GRIND TOOL) | 1 | |
| 9R7066G04 | FIXTURE MACHINING-STAGE 1 FAN CASE SHROUD (GRIND TOOL) | 1 | |
| 9R7066G06 | FIXTURE MACHINING-STAGE 1 FAN CASE SHROUD (GRIND TOOL) | 1 | |
| A22004-1 | Checking Fixture - Autothrottle Gearbox | 5 | |
| A27048-1 | FIXTURE - CHECK, GEARBOX BACKLASH | 1 | |
| A27048-2 | FIXTURE - CHECK, GEARBOX BACKLASH | 1 | |
| A27048-3 | FIXTURE - CHECK, GEARBOX BACKLASH | 1 | |
| A27048-40 | FIXTURE - CHECK, GEARBOX BACKLASH | 1 | |
| A27049-1 | CHECK FIXTURE - LEADING EDGE SLAT ANGLE GEARBOX BACKLASH | 1 | |
| A27054-14 | FIXTURE-H0LDING, GEAR ASSEMBLY, LE SLAT DRIVE | 1 | |
| A27055-1 | FIXTURE - TRAILING EDGE FLAP DRIVE WORM GEAR SHIM THICKNESS | 1 | |
| A27086-10 | SUPPORT FIXTURE - ELEVATOR SLAVE LINKAGE | 1 | |
| A27119-1 | HOLDING FIXTURE EQUIPMENT - GEAR ASSEMBLY, LE SLAT DRIVE | 1 | |
| A28004-1 | CHECK FIXTURE - SURGE TANK PRESSURE RELIEF VALVE | 4 | |
| A32043-1 | TEST FIXTURE - ACTUATOR, MAIN LANDING GEAR (MLG) DOOR LATCH | 1 | |
| A32050-1 | TORQUE FIXTURE - ACTUATOR PISTON, MAIN LANDING GEAR (MLG) AND NOSE LANDING GEAR (NLG) | 2 | |
| A32058-1 | HOLDING FIXTURE - ACTUATOR LOCK, NOSE LANDING GEAR (NLG) | 1 | |
| A32063-7 | TEST FIXTURE - SIDE AND DRAG BRACE LOCK ACTUATOR, MAIN LANDING GEAR (MLG) | 1 | |
| A32064-1 | FIXTURE - TEST, MAIN LANDING GEAR (MLG) DOOR ARMING LOCKOUT ACTUATOR | 1 | |
| A32072-1 | FIXTURE - FUNCTIONAL TEST, NOSE LANDING GEAR STEERING ACTUATOR | 1 | |
| A32084-1 | HOLDING FIXTURE - PISTON ROD, NOSE LANDING GEAR (NLG) LOCK ACTUATOR | 1 | |
| A32087-1 | FIXTURE - HOLDING, MAIN LANDING GEAR RETRACT ACTUA | 1 | |
| A32087-12 | FIXTURE - HOLDING, MAIN LANDING GEAR RETRACT ACTUATOR | 1 | |
| A32089-1 | SWAGING FIXTURE - PISTON ROD, MAIN LANDING GEAR (MLG) | 1 | |
| A32121-1 | FIXTURE EQUIPMENT - LANDING GEAR ACTUATOR ASSEMBLIES | 2 | |
| A32122-1 | FIXTURE EQUIPMENT - RETRACT ACTUATOR, MAIN LANDING GEAR (MLG) | 1 | |
| A52009-1 | TEST FIXTURE - BUNGEE SPRING, CARGO DOOR | 1 | |
| A52009-22 | TEST FIXTURE - BUNGEE SPRING, CARGO DOOR | 2 | |
| A52017-1 | TEST FIXTURE - GEARBOX, OVERHEAD PASSENGER DOOR COUNTERBALANCE | 1 | |
| A71021-52 | PROOF LOAD FIXTURE - BOOTSTRAP, GE ENGINES | 1 | |
| AD-280221 | Univ. Gage/Fixture | 1 | |
| AD-280235 | Univ. Gage/Fixture | 1 | |
| AD-280247 | Univ. Gage/Fixture | 1 | |
| AD-280261 | Univ. Gage/Fixture | 1 | |
| AD-280273 | Univ. Gage/Fixture | 1 | |
| AD-280287 | Univ. Gage/Fixture | 1 | |
| AD-280297 | Univ. Gage/Fixture | 1 | |
| AD-280308 | Univ. Gage/Fixture | 1 | |
| AD-280335 | Univ. Gage/Fixture | 1 | |
| AE5420 | FIXTURE HOLDING GENERATOR | 1 | |
| AGE-04267-401 | FIXTURE, BACKLASH MEASUREMENT AGE-01623-401 GSE 258 | 6 | |
| AGE10227 | FIXTURE GAGE | 2 | |
| AGE13107 | TAB BENDING FIXTURE OUTILLAGE IDG | 4 | |
| AGE13153 | Scavenge Filter Delta Pressure Switch Test Fixture | 1 | |
| AGE13316 | INSTALLATION FIXTURE EMERGENCY INTEGRATION CONTROL ASSY | 3 | |
| AGE13320 | AGE13320 AFT BATTERY INSTL FIXTURE 1 | 5 | |
| AGE15162 | LIFTING FIXTURE - COMPONENTS, QUAD HEAT EXCHANGER | 1 | |
| AGE16392 | HOLDING FIXTURE, PRIMARY HEAT EXCHANGER | 1 | |
| AGE16393 | ALIGNMENT FIXTURE, QUAD HEAT EXCHANGER | 1 | |
| AGE16393A | ALIGNMENT FIXTURE, QUAD HEAT EXCHANGER | 1 | |
| AGE16393B | ALIGNMENT FIXTURE, QUAD HEAT EXCHANGER | 1 | |
| AGE16395 | ALIGNMENT FIXTURE - ADJUSTABLE FLANGE | 2 | |
| AGE18803 | TOGGLE ASSEMBLY SWAGE FIXTURE | 1 | |
| AGE70491 | GRIND FIXTURE 1st Stage TW | 1 | |
| B27037-1 | FIXTURE - TRAILING EDGE FLAP TRANSMISSION TORQUE LIMITER | 1 | |
| B32026-1 | FIXTURE - STAKING, ACTUATOR, NOSE LANDING GEAR LOCK | 3 | |
| B32030-1 | FIXTURE - LOCK ACTUATOR, OVERHAUL EQUIPMENT, NOSE LANDING GEAR (NLG) | 3 | |
| B32039-134 | FIXTURE - FUNCTIONAL TEST, RETRACT ACTUATOR, LANDING GEAR | 1 | |
| B32039-135 | FIXTURE - FUNCTIONAL TEST, RETRACT ACTUATOR, LANDING GEAR | 3 | |
| B32039-135PM | FIXTURE - FUNCTIONAL TEST, RETRACT ACTUATOR, LANDING GEAR | 1 | |
| B32041-1 | TEST FIXTURE - TRUCK POSITION ACTUATOR, MAIN LANDING GEAR | 2 | |
| B32045 | LOCATING FIXTURE -0 VALVE, GEAR OPERATED | 1 | |
| B32045-1 | LOCATING FIXTURE - VALVE, GEAR OPERATED SEQUENCE, NOSE LANDING GEAR (NLG) | 4 | |
| B32045-11 | LOCATING FIXTURE - VALVE, GEAR OPERATED SEQUENCE, NOSE LANDING GEAR (NLG) | 4 | |
| B32045-11-ML | LOCATING FIXTURE-VALVE GEAR | 1 | |
| B32050-1 | ASSEMBLY FIXTURE - MAIN LANDING GEAR (MLG) | 2 | |
| B32050-50 | ASSEMBLY FIXTURE - MAIN LANDING GEAR (MLG) | 2 | |
| B32064 | RIGGING FIXTURE -0 MAIN LANDING GEAR DOOR | 1 | |
| B32064-1 | RIGGING FIXTURE - MAIN LANDING GEAR DOOR OPERATED SEQUENCE VALVE ASSEMBLY | 1 | |
| B32065 | TEST FIXTURE -0 MAIN LANDING GEAR DOWNLOCK | 1 | |
| B32065-1 | TEST FIXTURE - MAIN LANDING GEAR DOWNLOCK ACTUATOR | 1 | |
| B52007 | TEST FIXTURE -0 PASSENGER DOOR LATCHING | 1 | |
| B52007-1 | TEST FIXTURE - PASSENGER DOOR LATCHING MECHANISM | 2 | |
| B52010 | FIXTURE BACKLASH NO 1/2 DOOR MANUAL DRIVE GEARBOX ASSY | 1 | |
| B52010-1 | FIXTURE - BACKLASH, NUMBER 1 & 2 DOOR MANUAL DRIVE GEARBOX ASSEMBLY | 1 | |
| B71018 | HANDLING FIXTURE -0 HIGH SPEED GEARBOX, RB211- | 1 | |
| B71018-28 | HANDLING FIXTURE - HIGH SPEED GEARBOX, RB211-535 | 2 | |
| BM70844V | ADJUSTMENT FIXTURE RANGE: ± 100° ACCURACY: ± 0.5° | 1 | |
| BOF65B00763 | BORING FIXTURE - BODY LANDING GEAR TRUNNION SUPPORT FITTING REWORK | 1 | |
| BOF65B07950 | BORING FIXTURE - TRUNNION FITTING ASSEMBLY, NOSE LANDING GEAR | 1 | |
| BOFAOGTOOL747LG0013 | BORING FIXTURE FITTING ASSEMBLY - TRUNNION, NOSE LANDING GEAR | 1 | |
| BQ487 | Starrett 111 STAIR GAUGE FIXTURE | 1 | |
| C27023-1 | HOLDING FIXTURE - LEADING EDGE SLAT ACTUATOR | 1 | |
| C27027-14 | Test Fixture -Leading Edge Slat Actuator | 2 | |
| C27088-1 | Test Fixture - Hypoid Gear Backlash | 1 | |
| C28005 | SUMP DRAIN FIXTURE-ROGERSON AUXILIARY FUEL TANK | 1 | |
| C28005-1 | Sump Drain Fixture -Rogerson Auxiliary Fuel Tank | 6 | |
| C32008-1 | Holding Fixture -Main Landing Gear Damper Assembly | 3 | |
| C32027-1 | Holding Fixture Equipment - Functional Test, Landing Gear Control Lever | 2 | |
| C32027-2 | Holding Fixture Equipment - Functional Test, Landing Gear Control Lever | 2 | |
| C32027-3 | Holding Fixture Equipment - Functional Test, Landing Gear Control Lever | 3 | |
| C32034 | FIXTURE - TRANSPORTATION, MAIN LANDING GEAR, REMOVAL/INSTALLATION | 2 | |
| C32034 -339 | FIXTURE - TRANSPORTATION, MAIN LANDING GEAR, REMOVAL/INSTALLATION | 11 | |
| C32034-211 | FIXTURE - TRANSPORTATION, MAIN LANDING GEAR, REMOVAL/INSTALLATION | 4 | |
| C32034-227 | SPL-1869 Fixture - Transportation, Main Landing Gear, Removal/Installation | 11 | |
| C32034-227 | FIXTURE, B767 GEAR | 11 | |
| C32034-273 | FIXTURE – TRANSPORTATION, MAIN LANDING GEAR, REMOVAL/INSTALLATION | 6 | |
| C32034-33 | FIXTURE – TRANSPORTATION, MAIN LANDING GEAR, REMOVAL/INSTALLATION | 1 | |
| C32034-339 | FIXTURE - TRANSPORTATION, MAIN LANDING GEAR, REMOVAL/INSTALLATION | 11 | |
| C32034-343 | FIXTURE - TRANSPORTATION, MAIN LANDING GEAR, REMOVAL/INSTALLATION | 7 | |
| C32034-9 | FIXTURE, MAIN LANDING GEAR, INSTALLATION AND REMOVAL | 10 | |
| C32036-1 | Fixture Equipment - Actuator Assemblies, Nose Landing Gear | 2 | |
| C32036-101 | FIXTURE EQUIPMENT - ACTUATOR ASSEMBLIES, NOSE LANDING GEAR | 1 | |
| C32036-45 | Fixture Equipment - Actuator Assemblies, Nose Landing Gear | 5 | |
| C32036-46 | Fixture Equipment - Actuator Assemblies, Nose Landing Gear | 4 | |
| C32036-88 | Fixture equipment-actuator assemblies，nose landing gear | 1 | |
| C32036-92 | FIXTURE EQUIPMENT - ACTUATOR ASSEMBLIES, NOSE LANDING GEAR | 7 | |
| C32037 | HOLDING FIXTURE MAIN LANDING GEAR | 1 | |
| C32037-1 | Holding Fixture - Main Landing Gear | 10 | |
| C32037-46 | HOLDING FIXTURE - MAIN LANDING GEAR | 1 | |
| C32045-1 | FIXTURE SEAL CHANGE | 3 | |
| C32045-23 | Holding Fixture - Seal Change, Main Landing Gear | 5 | |
| C32045-63 | HOLDING FIXTURE - SEAL CHANGE, MAIN LANDING GEAR | 4 | |
| C32046-1 | Holding Fixture Equipment - Shimmy Damper Assembly, Main Landing Gear | 10 | |
| C32046-25 | HOLDING FIXTURE EQUIPMENT - SHIMMY DAMPER ASSEMBLY, MAIN LANDING GEAR | 3 | |
| C32053-1 | Fixture Equipment - Side Strut Assembly, Main Landing Gear | 3 | |
| C32053-37 | FIXTURE EQUIPMENT - SIDE STRUT ASSEMBLY, MAIN LANDING GEAR | 5 | |
| C32053-41 | FIXTURE EQUIPMENT - SIDE STRUT ASSEMBLY, MAIN LANDING GEAR | 5 | |
| C32053-50 | FIXTURE EQUIPMENT - SIDE STRUT ASSEMBLY, MAIN LANDING GEAR | 1 | |
| C32063-1 | HOLDING FIXTURE - SEAL CHANGE, MAIN LANDING GEAR | 1 | |
| C32076-1 | DISASSEMBLY/ASSEMBLY FIXTURE - SHOCK STRUT, MAIN LANDING GEAR | 1 | |
| C52001-1 | Holding Fixture - Compressed Spring Cartridge | 4 | |
| C52004 | HOLDING FIXTURE - COMPRESSED SPRING CARTRIDGE | 1 | |
| C52004-1 | HOLDING FIXTURE - COMPRESSED SPRING CARTRIDGE | 11 | |
| CBMG-12-3-N | FIXTURE GAGE MANDREL CHECK | 3 | |
| CBMG123N | FIXTURE GAGE MANDREL CHECK | 3 | |
| CF65B05501 | FIXTURE ASSEMBLY - RUDDERS HINGE ALIGNMENT | 1 | |
| CF65B05700 | FIXTURE ASSEMBLY - HINGE ALIGNMENT, ELEVATORS | 1 | |
| CF65B57652 | LINKAGE CHECK FIXTURE - UPPER DECK SLIDE | 1 | |
| CF65B61160 | CHECKING FIXTURE - CARGO BAGGAGE RETRACTABLE GUIDE RAIL INSTALLATION | 1 | |
| CF65B80511 | TEST AND BUILD FIXTURE - FORCE LIMITERS AND BUNGEE ASSEMBLIES | 1 | |
| CF65B80934 | CHECK FIXTURE - OUTBOARD AILERON GEARBOX | 1 | |
| CF65B81126 | CHECK FIXTURE - OUTBOARD TRANSMISSION ASSEMBLY, OUTBOARD TRAILING EDGE FLAP DRIVE | 1 | |
| CF65B81127 | CHECK FIXTURE - INBOARD TRANSMISSION ASSEMBLY, OUTBOARD TRAILING EDGE FLAP DRIVE | 1 | |
| CF65B81128 | CHECK FIXTURE - OUTBOARD TRANSMISSION ASSEMBLY, INBOARD TRAILING EDGE FLAP DRIVE | 1 | |
| CF65B81129 | CHECKING FIXTURE - INBOARD TRANSMISSION ASSEMBLY, INBOARD TRAILING EDGE FLAP DRIVE | 1 | |
| CF65B82986 | CHECK FIXTURE - BACKLASH CF65B82986 GEARBOX ASSEMBLY, INBOARD LEADING EDGE FLAP DRIVE | 1 | |
| CF65B83864 | CHECKING FIXTURE - ANGLE GEARBOX, TRAILING EDGE FLAP DRIVE | 1 | |
| CF65B94508 | CHECKING FIXTURE - BLEED DUCT, CF6-50 INTERFACE FLANGES | 1 | |
| CG9522103-0001 | OVERWING EMERGENCY EXIT DOOR (OWEED) SHAFT CAM RIGGING FIXTURE | 1 | |
| CJMD327-100 | GEARBOX HOLDING FIXTURE | 2 | |
| CPWA-30482 | Fixture – Holding, Accessories Gear Box Coupling S | 1 | |
| CTR5873-4 | DOOR LINKAGE TEST FIXTURE -LH | 1 | |
| CTR5873-5 | DOOR LINKAGE TEST FIXTURE -RH | 1 | |
| CX962 | Starrett 470 STAIR GAUGE FIXTURE (PAIR) | 1 | |
| DAH604105 | TEST FIXTURE-BRAKE ROD MAIN LANDING GEAR | 1 | |
| DZZ7352-1 | GAUGE, FIXTURE COMPENSATING PLATE | 6 | |
| E00332 | HOLDING FIXTURE FIRST STAGE ASSEMBLY | 1 | |
| E2J60661 | FILING FIXTURE STAGE 4,5&6 | 1 | |
| F-3501734-1 | OIL GEAR PUMP ASSEMBLY FIXTURE | 1 | |
| F-6770 | Fixture, Bolt Engagement | 1 | |
| F-6770 PM | FIXTURE, BOLT ENGAGEMENT | 1 | |
| F-6770PM | FIXTURE, BOLT ENGAGEMENT | 1 | |
| F2MA927522100 | MEASURING FIXTURE FOR FLAP INTERMEDIATE TRANSFER GEARBOX BACKLASH AND TORQUE | 1 | |
| F2MA927522200 | MEASURING FIXTURE FOR FLAP DUAL TRANSFER GEARBOX BACKLASH AND TORQUE | 1 | |
| F65-0-3098-29 | Detail 29, Nose Gear Steering Test Fixture | 1 | |
| F65-0-3098-41 | Detail 41 (DLD Cover Plate), Nose Gear Steering Test Fixture | 1 | |
| F65-0-3098-42 | Nose Gear Steering Test Fixture Detail 42 (Compensator Cap) | 1 | |
| F71263 | FIXTURE ASSY-AILERON GEARBOX TO HOLD THE | 1 | |
| F72770 | TEST FIXTURE -0 NOSE GEAR TRUNNION SWIVEL USED | 1 | |
| F72814 | FIXTURE ASSEMBLY -0 MAIN GEAR ACTUATOR TO | 1 | |
| F72851-1 | Grinding fixture-flap carriage inboard wing | 1 | |
| F73003 | FIXTURE-NOSE LANDING GEAR BUILD-UP USED TO | 1 | |
| F80088-1 | HOLDING FIXTURE NOSE GEAR UPPER ORIFICE SUPPORT TU | 1 | |
| F80088-1 -3 | Holding Fixture -Upper Orifice Support Tube. Nose Gear | 1 | |
| F80088-3 | HOLDING FIXTURE - UPPER ORIFICE SUPPORT TUBE, NOSE GEAR | 2 | |
| F80096-1 | HOLDING FIXTURE - FORWARD TRUNNION BEARING HOUSING, MAIN GEAR | 2 | |
| F80096-1 -4 -7 | Holding Fixture -Forward Trunnion Bearing Housing. Main Gear | 1 | |
| F80096-4 | HOLDING FIXTURE - FORWARD TRUNNION BEARING HOUSING, MAIN GEAR | 10 | |
| F80096-7 | HOLDING FIXTURE - FORWARD TRUNNION BEARING HOUSING, MAIN GEAR | 6 | |
| F80166-1 | Test Fixture - Pressure Relief Valve, Flame Arrestor Surge Tank | 26 | |
| F80174-1 | Test Fixture - Main Landing Gear Shock Strut | 1 | |
| F80174-100 | Fixture -Main Landing Gear Shock Strut Test | 1 | |
| F80180-1 | Fixture Set - Compass Swinging Target | 1 | |
| F80186-1 | ALIGNMENT FIXTURE TE FLAP DRIVE RIGHT ANGLE GEAR B | 1 | |
| F80186-10 | Alignment Fixture -Trailing Edge Flap Drive. Right Angle Gear Box | 7 | |
| F80232-1 | Test Fixture - Control Valve Assembly, Trailing Edge Flap | 3 | |
| F80263-1 | Holding Fixture -Piston. Leading Edge Slat Actuator | 4 | |
| F80267-1 | Test Fixture -Leading Edge Slat Actuator | 2 | |
| F80323-1 | TEST FIXTURE -CONTROL VALVE ASSEMBLY,TRAILING EDGE FLAP | 1 | |
| FCG30513 | ALIGNING AND GAUGE FIXTURE | 1 | |
| FCG31191 | ALIGNING AND GAUGE FIXTURE | 1 | |
| FCG31192 | ALIGNING AND GAUGE FIXTURE | 1 | |
| FCG32810 | ALIGNING AND GAUGE FIXTURE | 1 | |
| FD7043T-1 | TEST FIXTURE - PRESSURE RELIEF VALVE, FLAME ARRESTOR SURGE TANK | 1 | |
| FME65-73761 | HOLDING FIXTURE -0 MAIN LANDING GEAR | 5 | |
| FST51T254-01 | INLET LEAKAGE TEST FIXTURE | 1 | |
| FXT-13059 | GRIND FIXTURE 1st Stage TW | 1 | |
| FXT-13642 | LEAKAGE TEST FIXTURE (10IT) | 1 | |
| FXT-13675 | 2nd stage turbine nozzle rivet fixture | 1 | |
| FXT-15664 | GRIND FIXTURE (1st Stage whl) new design | 1 | |
| FXT13642 | LEAKAGE FIXTURE | 1 | |
| G27026-1 | TEST FIXTURE - INBOARD AND OUTBOARD TRAILING EDGE FLAP DRIVE POWER PACK | 1 | |
| G27067-1 | CHECKING FIXTURE EQUIPMENT - BALL NUT, TRAILING EDGE FLAP DRIVE | 5 | |
| G27067-2 | CHECKING FIXTURE EQUIPMENT - BALL NUT, TRAILING EDGE FLAP DRIVE | 3 | |
| G27067-80 | CHECKING FIXTURE EQUIPMENT - BALL NUT, TRAILING EDGE FLAP DRIVE | 5 | |
| G27067-81 | CHECKING FIXTURE EQUIPMENT - BALL NUT, TRAILING EDGE FLAP DRIVE | 5 | |
| G28005-35 | TEST FIXTURE-INTERGRAL TANK LEAKAGE TEST | 17 | |
| G32030 | TEST FIXTURE -0 BRAKE ROD, MAIN LANDING GEAR | 1 | |
| G32030-120 | TEST FIXTURE - BRAKE ROD, MAIN LANDING GEAR (CE) | 1 | |
| G32030-121 | TEST FIXTURE - BRAKE ROD, MAIN LANDING GEAR (CE) | 1 | |
| G32030-122 | TEST FIXTURE - BRAKE ROD, MAIN LANDING GEAR (CE) | 3 | |
| G32035-1 | TEST FIXTURE - DOWNLOCK ACTUATOR, WING LANDING GEAR AND BODY LANDING GEAR | 1 | |
| G32071-1 | TEST SUPPORT FIXTURE - LANDING GEAR BLEEDER TOOL | 1 | |
| G32078-1 | TEST SUPPORT FIXTURE - LANDING GEAR BLEE | 6 | |
| GAUGE29 | GAUGE29 FIXTURE | 3 | |
| GE-FQAP-302 | GUIDE FIXTURE FOR ROHMAN STD. ROTORS (GUIDE FIXTURE, GE-FQAP-302) | 2 | |
| GE-FQAP-302A | GUIDE FIXTURE FOR STAVELEY RA SCANNERS (GUIDE FIXTURE, GE-FQAP-302A) | 1 | |
| GE-FQAP-302B | GUIDE FIXTURE FOR HOCKING ROTORS AND NORTEC SPITFIRE 2000 ROTOR (GUIDE FIXTURE, GE-FQAP-302B) | 1 | |
| GE-FQAP-302C | GUIDE FIXTURE FOR FORSTER ROTORS (GUIDE FIXTURE, GE-FQAP-302C) | 1 | |
| GE-FQAP-302G | GUIDE FIXTURE N/P GE-FQAP-302G S/N 001 | 1 | |
| GS10673 | LEAKAGE TEST FIXTURE | 2 | |
| GS10885-1 | FIXTURE-LIMITING LINKAGE SHIMMING | 1 | |
| GS13258-1 | FIXTURE, VALVE LEAKAGE TEST | 1 | |
| GS13510 | FIXTURE LEAKAGE | 1 | |
| GS13570-1 | FIXTURE GAGE | 1 | |
| GS15047-1 | FIXTURE-SAFETY RELIEF VLV WITH GUAGE | 13 | |
| GS15818-1 | DIFFERENTIAL GEAR SHIMMING FIXTURE | 1 | |
| GS15859-1 | FIXTURE LEAKAGE VALVE SET | 1 | |
| GS15860-1 | FIXTURE LEAKAGE VALVE SET | 1 | |
| GS19307-1 | FIXTURE, GAGE | 1 | |
| GS20877-1 | TEST FIXTURE PROPELLER FLANGE | 2 | |
| GS21269-1 | LEAKAGE FIXTURE | 1 | |
| GS22266-1 | FIXTURE, PRESSURE & LEAKAGE TEST | 2 | |
| GS22275-1 | IDLER INPUT GEAR CUP INSTALLING FIXTURE | 1 | |
| GS22312-1 | RIGHT HAND IDLER GEAR CUP INSTALLING FIXTURE | 1 | |
| GS22468-1 | TEST FIXTURE, LEAKAGE | 1 | |
| GS22800-1 | LEAKAGE TEST FIXTURE | 1 | |
| GS23226-1 | LEAKAGE TEST FIXTURE | 1 | |
| GS2388 | KN IFE EDGE INSPECTION FIXTURE | 1 | |
| GS23881-1 | KN IFE EDGE INSPECTION FIXTURE | 1 | |
| GS24954-1 | LIFTING FIXTURE - COMPONENTS, QUAD HEAT EXCHANGER | 1 | |
| GS25565-1 | TEST FIXTURE ASSY, LOW-STAGE BLEED CHECK-VALVE | 7 | |
| GS25655-1 | TEST FIXTURE ASSY, LOW-STAGE BLEED CHECK-VALVE | 1 | |
| GSB5231001 | TEST FIXTURE P/N: GSB5231001 TO BE USED IN TESTING JXH AFT BAGGAGE DOOR GAS SPRINGS INTEGRITY. | 1 | |
| GSE343 | LANDING GEAR ASSEMBLY FIXTURE FOR E175 | 1 | |
| GSE499 | TEST FIXTURE ASSY, LOW-STAGE BLEED CHECK-VALVE | 1 | |
| Gedore-037110 | Gedore 037110 RUNDOWN ASSY 2 N.m - Rundown Fixture, Range : 0.2-2 N.m / | 1 | |
| Gedore-037120 | Gedore 037120 RUNDOWN ASSY 5 N.m - Rundown Fixture, Range : 0.5-5 N.m / | 1 | |
| Gedore-037130 | Gedore 037130 RUNDOWN ASSY 25 N.m - Rundown Fixture, Range : 2.5-25 N.m / | 1 | |
| HLPTNK1101301-501 | CONFORMAL FUEL TANK TRANSPORTATION/STORAGE FIXTURE SET | 1 | |
| HS7506 | FIXTURE-EMERGENCY THROTTLE VALVE | 1 | |
| HS7594 | FIXTURE-BLADE GEAR POSITIONING | 1 | |
| HS7670 | FIXTURE-SURGE VALVE TEST | 2 | |
| HS8134 | GAS GENERATOR GOVT FIXTURE | 1 | |
| HS8809 | REFRIGERATION UNIT HOLDING FIXTURE | 2 | |
| HS9492 | FIXTURE - LEAKAGE TEST | 2 | |
| HS9704 | FIXTURE - LIMITING LINKAGE HOLDING | 1 | |
| HS9839 | FIXTURE-LEAKAGE TEST | 1 | |
| HS9969 | LEAKAGE TEST FIXTURE | 1 | |
| HU35205 | Filing Fixture Stage 3 | 1 | |
| HU56207 | FIXTURE,VARIABLE FREQUENCY GENERATOR | 1 | |
| HU56215 | ADAPTER-FIXTURE ON GEARBOX TROLLEY | 1 | |
| IAE1J12362 | V2500 Internal Gearbox Fixture (EXT LEG SET ONLY) | 1 | |
| IAE1J12514 | FIXTURE, SETTING - ENGINE ASSY,LINKAGE,BLEED VALVE (2.5),INTERMEDIATE | 2 | |
| IAE1P16014 | FIXTURE LIFT TURN HPT ROTOR FIRST STAGE | 1 | |
| IAE1R18209 | FIXTURE, GRINDING - HP COMPRESSOR, STAGE 6 VARIABLE STATOR VANES | 1 | |
| IAE1R19811 | FILING FIXTURE, STAGE 3 | 1 | |
| IAE1R19812 | FILING FIXTURE, STAGE 4 | 1 | |
| IAE1R19813 | FILING FIXTURE, STAGE 5 | 1 | |
| IAE3R19167 | FIXTURE - HOLDING - FRONT STAGE 9-12 DIS | 1 | |
| IAE3R19168 | FIXTURE - HOLDING - REAR STAGE 9-12 DISC | 1 | |
| IAE3R19200 | FIXTURE - HOLDING - REAR STAGE 9-12 DISC | 1 | |
| J27059-38 | CHECK FIXTURE EQUIPMENT - BACKLASH, LE SLAT ANGLE GEARBOXES | 1 | |
| J27080-1 | HOLDING FIXTURE - TE FLAP, ANGLE GEARBOX | 1 | |
| J32043-119 | GEAR FIXTURE | 7 | |
| J32053-1 | FIXTURE EQUIPMENT - FUNCTIONAL TEST LANDING GEAR ACTUATOR | 1 | |
| J32053-129 | FIXTURE EQUIPMENT - FUNCTIONAL TEST LANDING GEAR ACTUATOR | 2 | |
| J32053-148 | FIXTURE EQUIPMENT, FUNCTIONAL TEST LANDING GEAR ACTUATOR | 1 | |
| J32053-92 | FIXTURE EQUIPMENT - FUNCTIONAL TEST LANDING GEAR ACTUATOR | 3 | |
| J32054-A11 | SUGGESTED PROOF LOAD FIXTURE EQPT | 1 | |
| J32057-1 | FIXTURE EQUIPMENT - LANDING GEAR ACTUATOR ASSEMBLY | 1 | |
| J32057-108 | FIXTURE EQUIPMENT - LANDING GEAR ACTUATOR ASSEMBLY | 3 | |
| J32057-94 | FIXTURE EQUIPMENT - LANDING GEAR ACTUATOR ASSEMBLY | 1 | |
| J32067 | FIXTURE FUNCTIONAL TEST LANDING GEAR SPRINGS | 1 | |
| J32067-1 | FIXTURE - FUNCTIONAL TEST, LANDING GEAR SPRINGS | 2 | |
| J32067-155 | FIXTURE - FUNCTIONAL TEST, LANDING GEAR SPRINGS | 1 | |
| J32067-46 | FIXTURE - FUNCTIONAL TEST, LANDING GEAR SPRINGS | 2 | |
| J32067-85 | FIXTURE - FUNCTIONAL TEST, LANDING GEAR SPRINGS | 4 | |
| J32069-129 | BUILD-UP FIXTURE EQUIPMENT - OLEO STRUT, MAIN LANDING GEAR | 2 | |
| J32069-182 | BUILD-UP FIXTURE EQUIPMENT - OLEO STRUT, MAIN LANDING GEAR | 1 | |
| J32069-183 | BUILD-UP FIXTURE EQUIPMENT - OLEO STRUT, MAIN LANDING GEAR | 1 | |
| J32069-184 | BUILD-UP FIXTURE EQUIPMENT - OLEO STRUT, MAIN LANDING GEAR | 1 | |
| J32069-185 | BUILD-UP FIXTURE EQUIPMENT - OLEO STRUT, MAIN LANDING GEAR | 1 | |
| J32070 | BUILD UP FIXTURE EQPT. SHOCK STRUT NOSE LANDING GEAR | 1 | |
| J32070-59 | BUILD-UP FIXTURE EQUIPMENT - SHOCK STRUT, NOSE LANDING GEAR | 1 | |
| J32070-64 | BUILD-UP FIXTURE EQUIPMENT - SHOCK STRUT, NOSE LANDING GEAR | 2 | |
| J32080-1 | FIXTURE EQUIPMENT - HYDRAULIC STRUT, ACTUATOR ASSEMBLY, MAIN LANDING GEAR | 1 | |
| J32080-23 | FIXTURE EQUIPMENT - HYDRAULIC STRUT, ACTUATOR ASSEMBLY, MAIN LANDING GEAR | 1 | |
| J32089-1 | FIXTURE EQUIPMENT - HYDRAULIC STRUT, ACTUATOR ASSEMBLY, MAIN LANDING GEAR | 1 | |
| J32089-124 | FIXTURE EQUIPMENT - HYDRAULIC STRUT, ACTUATOR ASSEMBLY, MAIN LANDING GEAR | 2 | |
| J32107-1 | FIXTURE EQUIPMENT - SIDE STRUT ASSEMBLY, MAIN LANDING GEAR | 1 | |
| J32109-1 | FIXTURE EQUIPMENT - DRAG STRUT ASSEMBLY, MAIN LANDING GEAR | 1 | |
| J52023-1 | Backlash Fixture -Large Cargo Door. Manual Drive Gearbox | 1 | |
| J52028-1 | BACKLASH FIXTURE EQUIPMENT - MANUAL DRIVE GEARBOX, LATCH PDU, LARGE CARGO DOOR | 1 | |
| J52046-1 | Positioning fixture and strongback-main landing gear door | 1 | |
| J52046-2 | Positioning fixture and strongback-main landing gear door | 1 | |
| K21031-1 | FIXTURE, ALIGNMENT - QUAD HEAT EXCHANGER | 2 | |
| K21031-3 | Alignment Fixture, Quad Heat Exchanger | 3 | |
| K32033-1 | BUILD-UP FIXTURE EQUIPMENT - SHOCK STRUT, NOSE LANDING GEAR | 4 | |
| K52013 | TEST FIXTURE - BUNGEE SPRING CARGO DOOR | 1 | |
| K52019 | BACKLASH FIXTURE - LARGE CARGO DOOR MANUAL GEARBOX | 1 | |
| K71003-65 | PROOF LOAD FIXTURE GE | 4 | |
| K71003-79 | Proof Load Fixture Adapter - GE Engines | 1 | |
| L27001-5 | FORCE GAUGE TEST FIXTURE | 1 | |
| LP01000150 | LEAKAGE TEST FIXTURE | 1 | |
| LTCT 2075 | HOLDING FIXTURE FOR SUN GEAR | 1 | |
| LTCT11466-01 | Fixture, Masking, First Stage Gas Producer | 1 | |
| LTCT115 | GEAR HOLD FIXTURE | 1 | |
| LTCT11503-01 | Fixture Assembly, First Stage Gas Producer, Disc Assembly Water Flow | 1 | |
| LTCT11538-01 | Fixture, Flow, Third Stage Turbine Nozzle | 1 | |
| LTCT12051-01 | Fixture, Molding, Fourth Stage Vane Assembly | 1 | |
| LTCT12754-01 | Fixture, Molding - Second Stage Vane Assembly | 1 | |
| LTCT14163-01 | Fixture Assembly, Third Stage Turbine Disc Riveting | 1 | |
| LTCT14164 | Fixture Assembly, Fourth Stage Riveting | 1 | |
| LTCT14611-01 | Fixture, Holding, Bevel Gear and Backlash Gage | 1 | |
| LTCT14757-01 | Fixture Assembly, Pinion Gear Wrench and Torque | 1 | |
| LTCT14757-02 | Fixture Assembly, Pinion Gear Wrench and Torque | 1 | |
| LTCT14794-01 | Fixture, Holding, Air/Oil Separator Gear Wrench | 1 | |
| LTCT2048 | COMPRESSOR PINION GEAR HOLDING FIXTURE | 1 | |
| LTCT207 | FIXTURE,TEST,GEAR BOX | 1 | |
| LTCT2075 | HOLDING FIXTURE - SUN GEAR | 1 | |
| LTCT4996 | FIXTURE,HOLDING,GEAR | 1 | |
| LTCT5451 | OUTPUT GEAR HOLDING FIXTURE | 1 | |
| LTCT5487x | Target Fixture | 1 | |
| LTCT5709-01 | Fixture, Holding, Nut and Gear Shaft Wrench | 1 | |
| LTCT5769 | SPUR GEAR HOLDING FIXTURE | 1 | |
| LTCT5782-01 | Fixture, Holding, Gear | 1 | |
| LTCT7229-01 | Fixture, Carrier Assembly, Oil Target | 1 | |
| LTCT7287-01 | FIXTURE, SPEED PICKUP GEAR TORQUE | 1 | |
| LTCT7467-01 | Fixture, Gearshaft Concentricity Gaging | 1 | |
| LTCT7508-01 | Fixture, No. 2 Bearing Package Pressure Check | 1 | |
| LTCT7539-01 | Fixture Assembly, Oil Tube Target | 1 | |
| LTCT7605-01 | Fixture, Holding, First Stage Turbine Disc | 1 | |
| LTCT7632-01 | Fixture, Carrier Assembly, Oil Flow Target | 1 | |
| LTCT7699 | FIXTURE, HOLDING, SUN GEAR AFT | 1 | |
| LTCT7699-01 | Fixture, Holding, Sun Gear Aft | 1 | |
| LTCT7842 | Wrench and Holding Fixture, Nut and Gear Shaft | 1 | |
| MIT161U1000-991 | 747, MAIN GEAR SENSOR INSTALL & TEST FIXTURE | 1 | |
| MIT65B01290-1 | ASSEMBLY FIXTURE - UPLOCK ASSEMBLY, WING LANDING GEAR AND BODY LANDING GEAR | 1 | |
| MIT65B18301 | PIN SET - RUDDER HINGE ALIGNMENT FIXTURE | 1 | |
| NT984 | GEAR SELECTION FIXTURE | 1 | |
| P35 | FIXTURE, INSTALL AND REMOVE - INLET GEARBOX MODULE (INSTALL AND REMOVE FIXTURE) | 1 | |
| PME65B01221-1 | SUPPORT FIXTURE - INNER CYLINDER, WING LANDING GEAR, BODY LANDING GEAR AND NOSE LANDING GEAR | 3 | |
| PWA 107309 | NOTCH GAUGE SUPPORT FIXTURE (PRATT & WHITNEY – NDIP-662) | 5 | |
| PWA 107723 | FIXTURE, SUPPORT – HPT 1ST STAGE AIR SEAL | 1 | |
| PWA 25046 | Intermediate Outer Flange Lift Fixture | 1 | |
| PWA 25188 | HPC BIRD CAGE FIXTURE | 1 | |
| PWA 25732 | STORAGE FIXTURE | 1 | |
| PWA 25913 | FIXTURE WITH GAGE | 1 | |
| PWA 25915 | HOLDING FIXTURE WITH GAGE | 2 | |
| PWA 27850 | STRETCH GAUGE FIXTURE | 2 | |
| PWA 28678 | BLADE HOLDING FIXTURE WITH GAGE | 2 | |
| PWA 86119 | FIXTURE, TARGET ASSEMBLY | 1 | |
| PWA101473 | FIXTURE AXIAL RUN-OUT DISK ASSY LPT 6TH STAGE | 1 | |
| PWA102119 | INTERMEDIATE SCAVENGE TUBE REMOVAL FIXTURE | 1 | |
| PWA104382 | FIXTURE HANDLING - ENGINE ASSEMBLY GEARBOX GROUP | 1 | |
| PWA111736 | FIXTURE, LIFT - MAIN GEARBOX ASSEMBLY | 1 | |
| PWA12667 | Eye (Lifting Fixture, Stage Turbine; 400lbs) | 1 | |
| PWA211419 | FIXTURE PIN DIFFUSER H FLANGE BRACKETS | 1 | |
| PWA25968 | FIXTURE - NOZZLE ASSY, GEARBOX OIL FLOW_[PWA25968] | 2 | |
| PWA25970 | FIXTURE - NOZZLE ASSY, GEARBOX OIL FLOW_[PWA25970] | 2 | |
| PWA33304 | Eye (Lifting Fixture, #1 Stage Turbine; 380lbs) | 1 | |
| PWA46014 | Eye (Lifting Fixture, #1 Stage Turbine; 460lbs) | 1 | |
| PWA51235 | FIXTURE, ENGINE MAINGENANCE, AIRCRAFT | 1 | |
| PWA51235C | FIXTURE, ENGINE MAINGENANCE, AIRCRAFT | 1 | |
| PWA55527 | FIXTURE, ENGINE MAINGENANCE, AIRCRAFT | 1 | |
| PWA80575 | FIXTURE - HANDLING, GEARBOX GROUP - PW2000 ENGINES | 1 | |
| PWA80627 | GAGE, FIXTURE | 1 | |
| PWA80865 | FIXTURE, LEFT GEARING DRIVE | 1 | |
| PWA80866 | FIXTURE, RIGHT GEARING DRIVE | 1 | |
| PWA85123 | FIXTURE-HANDLING MAIN GEARBOX GROUP | 1 | |
| PWA85568 | FIXTURE MACH.CONTRAINT HUB LPT FIFTH STAGE | 1 | |
| PWA85682 | Fixture, Constraint - Hub, LPT 5th Stage, Machining & Inspection | 2 | |
| PWA86056 | FIXTURE - HANDLING, MAIN GEARBOX GROUP | 1 | |
| PWC30128-8 | FIXTURE, COMPRESSOR ROTOR BLADELENGTH GAGE | 2 | |
| PWC37881 | FIXTURE, HOLDING LOWER ANGLE DRIVE GEARSHAFT | 1 | |
| PWC38296 | FIXTURE, DRILLING, 1ST STAGE POWER TURBINE RIVET | 5 | |
| PWC38681 | Fixture, Holding, Second Stage Reduction Idler Gear | 1 | |
| PWC38682 | Fixture, Holding, Second Stage Reduction Idler Gear | 1 | |
| PWC42189 | Fixture Starter gen gearshaft | 1 | |
| PWC43525 | FIXTURE LOADING GEARSHAFT | 1 | |
| PWC50353 | PRESS FIXTURE/GEARBOX | 1 | |
| PWC50681 | FIXTURE, GEAR BOX ASSY | 1 | |
| PWC55630 | FIXTURE-RGB GEAR TRAIN LOCKING | 5 | |
| PWC56097 | FIXTURE, LOADING, OIL PUMP DRIVE GEAR | 1 | |
| PWC56344 | FIXTURE, SECOND STAGE IDLER GEAR HOLDING, STARBOARD | 1 | |
| PWC56358 | Fixture Gauge | 1 | |
| PWC58761 | GEARBOX ASSEMBLY FIXTURE | 1 | |
| PWC58840 | ASSEMBLY FIXTURE - GEARBOX | 1 | |
| PWC60613 | FIXTURE-HOLDING GEARSHAFT | 1 | |
| PWC62500 | FIXTURE - 1ST STAGE VANE | 1 | |
| PWC62629 | FIXTURE GAUGE | 1 | |
| PWC70742 | SUN GEAR LIFTING FIXTURE | 1 | |
| PWC72735 | FIXTURE LIFTING GAS GEN | 3 | |
| Q21820 | Stroke Gauge Checking Fixture | 1 | |
| Q21820 PM | STROKE GAUGE CHECKING FIXTURE | 1 | |
| Q21820PM | STROKE GAUGE CHECKING FIXTURE | 1 | |
| Q46137 | FIXTURE FOR THE ADJUSTMENT OF THE TARGETS | 1 | |
| RB T102076 | Quill Assembly Gear Holding Fixture | 3 | |
| RB T102079 | Main Input Gear Holding Fixture | 1 | |
| RB0006-809-00671 | Arbor Press Fixture Tail Rotor Gearbox Housing | 1 | |
| RB0006-809-00682 | Assembly & Disassembly Fixture Gearbox Bev/Pin | 1 | |
| RB6872546 | Bleed Valve Control Fixture Gauge | 1 | |
| RB6872880 | FIXTURE----CHECKING, COMPRESSOR MOUNTING INSERTS (GEARBOX) | 2 | |
| RB6895994 | Compressor Discharge Air Tube Pressure Test Fixture | 1 | |
| RBA5107-3 | Holding Fixture Input Gear "C" Model Main Rotor | 1 | |
| RBA5109-17 | Holding Fixture Output Gear "C" Model Main Rotor | 1 | |
| RBA5111-18 | Holding Fixture Output Gear "C" Model Tail Rotor | 1 | |
| RBD25121-30201 | Holding Fixture Input Gear | 1 | |
| RBD25125-30201 | Holding Fixture Output Gear | 1 | |
| RBD25430-30201 | Holding Fixture Gear Shaft Bev/Pin Output Tail Rotor | 1 | |
| RBE330A93-3412-00 | Tool, Ball Bearing Cage Fixture | 2 | |
| RBT18801 | Tail Rotor Output Gear Holding Fixture Th55 | 1 | |
| RRT023352 | GRINDING FIXTURE - CONCAVE WEDGE (FW34490) | 1 | |
| RSE1022 | STORAGE FIXTURE | 2 | |
| RSE1040 | Primary Nozzle Storage Fixture | 1 | |
| SB-CFM56-2-75-007 | LEACKAGE FIXTURE | 1 | |
| SE27-0001 | FIXTURE CONTROL WHEEL SRAIGHT EDGE | 21 | |
| SPL-1869 | FIXTURE, MAIN LANDING GEAR, INSTALLATION AND REMOVAL | 1 | |
| SPL-5655 | TOOL-FIXTURE, ACCESSORY GEAR BOX MATING RING REMOV | 1 | |
| SPL-5656 | FIXTURE-REMOVAL, ACCESSORY GEAR BOX MATING RINGS | 1 | |
| SPL-7130 | FIXTURE – LINKAGE CHECK, UPPER DECK SLIDE | 1 | |
| SPL-9337 | Fixture - Torque, Actuator Piston, Landing Gear | 1 | |
| SPL-9927 | FIXTURE - LINE REPLACEABLE UNITS, GENX-1B/-2B | 1 | |
| ST-71 | FIXTURES, GAGE VALVE GUIDE | 6 | |
| T 25758 | Fixture, Pressurizing Valve leakage Test | 1 | |
| T-19315 | LEAKAGE FIXTURE | 1 | |
| T-25758 | FIXTURE, TEST PRESSURIZING VALVE LEAKAGE | 1 | |
| T102076 | QUILL ASSEMBLY GEAR HOLDING FIXTURE | 2 | |
| T22280710-TF-1 | FIRST STAGE FIXTURE | 1 | |
| T25758 | Fixture, Test pressurizing Valve Leakage | 1 | |
| T322064 | VIEWING GAUGE FIXTURE AND MASK | 1 | |
| T325726-901 | HIGH VOLTAGE POWER SUPPLY TEST FIXTURE | 1 | |
| T326392 | HIGH VOLTAGE POWER SUPPLY HOLDING FIXTURE | 1 | |
| TAF00458 | WORM GEAR HOLDING FIXTURE | 1 | |
| TAF00462 | WORM GEAR BUSHING ASSEMBLY FIXTURE | 1 | |
| TB7003G001 | GEARBOX LATCH ASSY FIXTURE | 1 | |
| TD27480 | AMPLIFIER GAGE FIXTURE | 1 | |
| TD3017-001 | HOLDING FIXTURE FIRST STAGE ASSEMBLY | 1 | |
| TE65-73701 | Fixture Set -Compass Swinging Target | 1 | |
| TE65-73701-1 | FIXTURE COMPASS SWINGING TARGET | 1 | |
| TE65-73701-34 | FIXTURE COMPASS SWINGING TARGET | 1 | |
| TEK-5006/5007 ASY | Transducer Assembly and Manipulating Fixture set, w/ Plunger and Syringe | 1 | |
| TEKIT-5006/5007 | Transducer Assembly & Manipulating Fixture Set, Includes all items per 767 PT4 57-50-05 PG9 FIG4, TEK-5006,TEK-5006-C1,TEK-5006-C2, TEK-5007, TEK-5007-C1, Manipulating Rod, Syringe, Cable, Couplant & 1450 Pelican Case *Does not include NDT694 & NDT695 | 1 | |
| TMA2361 | GEARSET INTALLATION FIXTURE | 1 | |
| TQN543 | PLUNGER ASSY FIXTURE | 1 | |
| TSF29T-01001-4 | TEST SUPPORT FIXTURE, HYDRAULIC TUBING LEAKAGE TEST | 1 | |
| TSF35T-12001-4 | TEST SUPPORT FIXTURE, 737 OXYGEN ADAPTER | 1 | |
| TSF35T-12001-5 | TEST SUPPORT FIXTURE TEST KIT, CREW OXYGEN SYS | 1 | |
| TSF38T-11001-24 | TEST SUPPORT FIXTURE-PASSENGER WATER AIR GAGE | 1 | |
| TSF38T-11001-25 | TEST SUPPORT FIXTURE, PASSENGER WATER GAGE | 1 | |
| TSF38T-11001-35 | TEST SUPPORT FIXTURE - GAUGE SHUT OFF VALVE | 1 | |
| TSJ65B01538-1 | TEST FIXTURE - UPLOCK ACTUATOR, MAIN LANDING GEAR | 2 | |
| TSJ65B01540-1 | TEST FIXTURE - DOWNLOCK ACTUATORS, WING LANDING GEAR AND BODY LANDING GEAR | 1 | |
| WSPL-39 | TEST FIXTURE ASSY, LOW-STAGE BLEED CHECK-VALVE | 1 | |
| f 80186-10 | Aligmant Fixture T.E Flap Drive Right Angle Gear Box | 7 | |
| f80186-10 | Aligmant Fixture T.E Flap Drive Right Angle Gear Box | 7 | |
| lC6279 | FIXTURE SET, INSP. LPT STATOR SEAL, STAGE 4 TF39 ENG. | 1 | |
| lC6872 | FIXTURE, INST. & REMOAL- ACCESS GEARBOX HORIZ | 1 | |
| C067-00-0431 | FLANGE SEALING SURFACE LOCATION FIXTURE | 1 | |
| 98A27208442000 | FIXTURE HINGE ARMS SERVOCONTROLS,USED TO | 3 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
