| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| HS6809 | FIXTURE BEARING | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 2024488-1 | BEARING PRESS FIXTURE | 1 | |
| 105-14181W1 | NEEDLE BEARINGS ASSEMBLY FIXTURE | 1 | |
| 10C1062G01 | FIXTURE, PULLER - NO. 4 BEARING INNER RACE | 1 | |
| 10C1076G03 | Fixture,torque-No.4 bearing nut | 1 | |
| 10C1087G01 | FIXTURE, PULLER - NO. 5 BEARING AIR/OIL SEPARATOR (PULLER FIXTURE) | 1 | |
| 10C1103G01 | Fixture,clamping-No 3 bearing assembly,inlet bearbox | 1 | |
| 10C1114G02 | Fixture, Liftno 1 & No 2 Bearing Housing Assembly | 1 | |
| 10C1120G01 | FIXTURE, INSTALL/REMOVE - NO. 5 BEARING RETAINING NUT (INSTALL/REMOVE FIXTURE) (SUPERSEDED BY 10C1120G02) | 1 | |
| 10C1120G02 | FIXTURE, INSTALL/REMOVE - NO. 5 BEARING RETAINING NUT (INSTALL/REMOVE FIXTURE) (SUPERSEDES 10C1120G01) | 1 | |
| 10C1173G01 | Fixture,install/remove- no 5 bearing retaining nut | 1 | |
| 10C1295G01 | Fixture,holding-race,outer,No.4 bearing | 1 | |
| 10C1344 | FIXTURE, PULLER- NO 5 BEARING AIR/OIL SEPARATOR | 1 | |
| 10C1344G01 | Fixture，puller-No 5 bearing air/oil separator | 1 | |
| 10C3115G01 | Fixture,support-N° 2 bearing outer race | 1 | |
| 114-498 | BEARING CUP REMOVAL AND FIXTURES | 1 | |
| 114G1373-1 | FIXTURE, ALIGNMENT, BEARING SLIDING | 1 | |
| 11C3094 | FIXTURE - SEATING - CHECK-NO 2 BEARING | 1 | |
| 11C3094G02 | FIXTURE, SEATING, CHECK - NO. 2 BEARING | 1 | |
| 11C3118 | FIXTURE - LIFT & TURN NO. 2 BEARING HOUSING | 1 | |
| 11C3151 | FIXTURE - LIFT AND TURN NO. 1 BEARING SUPPORT HOUSING | 1 | |
| 11C3151G02 | FIXTURE, LIFT AND TURN NO. 1 BEARING SUPPORT HOUSING | 1 | |
| 11C3166G04 | Fixture install remove seal rotating no 1 bearing | 1 | |
| 11C3206G01 | FIXTURE, TARGET - OIL NOZZLE, NO. 1 BEARING | 1 | |
| 11C3334 | FIXTURE - TORQUE - NO. 5 BEARING SPANNER NUT | 1 | |
| 11C3454 | FIXTURE - FLOW CHECK-NO 5 LPT BEARING DAMPER | 1 | |
| 11C3454G02 | FIXTURE, FLOW CHECK - NO. 3 BEARING DAMPERS, FHF | 1 | |
| 11C3455 | FIXTURE - ALIGNMENT TUBE NO. 1 BEARING OIL SUPPLY | 1 | |
| 11C3543 | FIXTURE - BUILDUP - NO. 5 BEARING HOUSING (BUILDUP FIXTURE) | 1 | |
| 11C3550 | FIXTURE - HANDLING/INSTALLATION - NO. 5 BEARING HOUSING (HANDLING/INSTALLATION FIXTURE) | 1 | |
| 11C3596 | FIXTURE - PLUG - NO. 5 BEARING OIL FLOW (FLOW CHECK FIXTURE) | 1 | |
| 11C4208G01 | Fixture, Inspect / Machine-Restraining No 2 Bearing Housing | 1 | |
| 11C4209G01 | Fixture,restraining-no.1 bearing support housing | 1 | |
| 11C4211G01 | Fixture,restraining-no 1 bearing stationary seal | 1 | |
| 11C4214G01 | Fixture,restraining-no 5 bearing seal hsg | 1 | |
| 11C4215G01 | Fixture,restraining-seal,rotating,air,No 4 bearing | 1 | |
| 11C4223G01 | Fixture,restraining-seal stationary.no 3 bearing | 1 | |
| 11C4227G01 | Fixture,restraining-drain seal,shroud rear no.3 bearing | 1 | |
| 11C4229G01 | Fixture,restraining-seal rotating oil rear no 3 bearing | 1 | |
| 11C4232 | FIXTURE - RESTRAINING-SEAL - STATIONARY INNER FWD NO 5 BEARING | 1 | |
| 11C4232G01 | Fixture,restraining-seal,stationary inner fwd,No 5 bearing | 1 | |
| 11C4233 | FIXTURE - RESTRAINING-COVER - SUMP NO 5 BEARING | 1 | |
| 11C4254G01 | FIXTURE, CAL-ROD HEATER - NO. 1 BEARING HOUSING (208-240 VAC, 50-60 HZ) | 1 | |
| 11C4257 | FIXTURE - SEATING-NO 2 BEARING INNER RACE | 1 | |
| 11C4257G01 | FIXTURE, SEATING - NO. 2 BEARING INNER RACE | 1 | |
| 11C4258 | FIXTURE - SEATING-NO 1 BEARING - RLR - CYL - INNER RACE | 1 | |
| 11C4258G01 | Fixture,seating-No 1 bearing,rlr.cyl inner race | 1 | |
| 11C4260 | FIXTURE - LIFT & TURN-FWD FAN SHAFT & NO 2 BEARING | 1 | |
| 11C4260G02 | FIXTURE, LIFT/TURN - FORWARD FAN SHAFT AND NO. 2 BEARING | 1 | |
| 11C4262 | FIXTURE, LIFT & TURN FWD FAN SHAFT & NO 2 BEARING | 1 | |
| 11C4599G01 | FIXTURE, HEAT GUN - NO. 2 BEARING HOUSING | 1 | |
| 11C4847G01 | FIXTURE, LIFT AND TURN NO. 2 BEARING HOUSING | 1 | |
| 1525-510 | FIXTURE, BEARING PRELOAD | 1 | |
| 17312-0-201 | Bearing Press Fixture | 1 | |
| 17320-0-201 | Bearing Press Fixture | 1 | |
| 18C1042 | FIXTURE, LIFT - NO 5 BEARING SUPPORT | 1 | |
| 18C1508 | FIXTURE, HOLDING - NO. 1 BEARING AFT INNER RACE | 1 | |
| 18C1516 | FIXTURE, TORQUE - NO. 1 BEARING OUTER RACE LOCKNUT | 1 | |
| 18C1532G01 | Base fixture, assy/dissassy no.3 bearing | 1 | |
| 1900896 | BEARING INSERTION FIXTURE | 1 | |
| 19C0124G01 | Fixture,inner race bearing roller cylindrical no.1 | 1 | |
| 19C0628G01 | Fixture Install-Aft Seals Inner Race&Oil Scoop No 4 Bearing | 1 | |
| 19C0636P01 | Fixture, Build- No 4 Bearing Housi | 1 | |
| 19C0637G01 | Fixture Install-Aft Seal No.4 Bearing Housing | 1 | |
| 1C8065G01 | FIXTURE ASSEMBLY - ALIGNMENT NO. 5 AND NO. 6 BEARING | 1 | |
| 1C9319G01 | FIXTURE, INSTALL/REMOVE - NO. 6 BEARING PLUG | 1 | |
| 2024056-1 | BEARING PRESS FIXTURE | 1 | |
| 2024056-1PM | BEARING PRESS FIXTURE | 1 | |
| 2024064-1 | bearing Press Fixture | 1 | |
| 2024065-1 | Bearing Press Fixture | 1 | |
| 2024150-1 | Bearing Press Fixture | 1 | |
| 2024246-3 | BEARING PRESS FIXTURE | 1 | |
| 2024272-1 | Bearing Removal Fixture | 1 | |
| 2024272-1PM | BEARING REMOVAL FIXTURE | 1 | |
| 2024488-1 | BEARING PRESS FIXTURE | 1 | |
| 2024544-1 | Bearing Removal Fixture | 1 | |
| 2024658-1 | Bearing Press Fixture | 1 | |
| 2024783-1 | Bearing Removal Fixture | 1 | |
| 2024783-1PM | BEARING REMOVAL FIXTURE | 1 | |
| 2024821-1 | FIXTURE TEST, BEARING SEAL | 1 | |
| 2025261-1 | BEARING REMOVAL FIXTURE | 1 | |
| 2025517-1 | Flyweight Bearing Fixture | 1 | |
| 204783-1 | BEARING REMOVAL FIXTURE | 1 | |
| 206R2200-10 | BEARING REMOVAL FIXTURE | 1 | |
| 2189070F1 | Bearing Press And Stake Fixture | 1 | |
| 272166-2 | BEARING PRESS FIXTURE | 1 | |
| 278392 | BEARING PRESS FIXTURE | 1 | |
| 2558783 | FIXTURE BEARING CUP | 1 | |
| 23033031 | FIXTURE--HOLDING, FRONT BEARING HOUSING 7 | 1 | |
| 23058405 | Fixture – Arbor Press, Separate Damper From No. 5 Bearing | 1 | |
| 289238-1 | FIXTURE BEARING PRESS | 1 | |
| 289452-1 | FIXTURE, PNEUMATIC, TOOTH BEARING PATTERN | 1 | |
| 291866-1 | BEARING CARRIER MACHINING FIXTURE | 1 | |
| 291867-1 | BEARING CARRIER MACHINING FIXTURE | 1 | |
| 293133-1 | BEARING INSPECTION FIXTURE | 1 | |
| 293406-1 | BEARING ALIGNMENT FIXTURE ASSEMBLY | 1 | |
| 298112-1 | BEARING INSTALLATION FIXTURE ASSEMBLY | 1 | |
| 2C 14094G06 | FIXTURE, SEAL CHECK NO. 4 BEARING AND SEAL | 1 | |
| 2C14094 | FIXTURE, SEATCHECK-NO. 4B BEARING & SEAL | 1 | |
| 2C14094 REV Y | FIXTURE, SEATCHECK-NO. 4B BEARING & SEAL | 1 | |
| 2C14094G05 | FIXTURE, SEATING CHECK ‐ NO. 4B BEARING AND SEAL | 1 | |
| 2C14094G06 | FIXTURE, SEATING #4 BEARING & SEAL | 1 | |
| 2C14104G01 | FIXTURE, HANDLING-NO.4B BEARING AFT INNER RACE | 3 | |
| 2C147892 | ARBOR, CONCENTRICITY FIXTURE - NO. 3 BEARING | 1 | |
| 2C14789P01 | CONCENTRICITY FIXTURE NO. 3 BEARING HOUSING | 1 | |
| 2C14789P02 | ARBOR, CONCENTRICITY FIXTURE - NO. 3 BEARING HOUSING | 1 | |
| 2C14790 | FIXTURE, RUNOUT - NO. 3 BEARING/SEALS | 1 | |
| 2C14790 REV C | FIXTURE, RUNOUT - NO. 3 BEARING/SEALS | 1 | |
| 2C14790G01 | FIXTURE, RUNOUT - NO. 3 BEARING SEALS | 2 | |
| 2C14858G01 | FIXTURE,INTALL,-HPC BUMPER BEARING | 1 | |
| 2C14871 | FIXTURE, MANIFOLD - N°1 BEARING | 1 | |
| 2C14871G01 | FIXTURE, INSTALL \ REMOVE-MANIFOLD NO 1 BEARING | 6 | |
| 2C14871G02 | FIXTURE,INSTALL/REMOVE-MANIFOLD N°1 BEARING | 3 | |
| 2C14871G03 | Fixture, Installation/Removal - Manifold No. 1 Bearing | 1 | |
| 2C18118 | 4R BEARING STATIONARY AIR/OIL SEAL GAGE FIXTURE | 1 | |
| 2C4094 | FIXTURE, SEATCHECK- NO 4B BEARING AND SEAL | 1 | |
| 2C5263G01 | FIXTURE - #1 & #2 BEARING HOUSING | 1 | |
| 2C6084G04 | NO.5 BEARING SPANNER NUT FIXTURE (LONG) BRAND (GE) | 1 | |
| 2C6356 | FIXTURE, INSTALL - NO.4 BALL BEARING | 1 | |
| 2C6895G01 | FIXTURE, RUNOUT NO.1 AND NO.2 BEARING HOUSING. | 1 | |
| 2C7098 | FIXTURE,MACHINE-NO.4 BEARING S | 1 | |
| 2C7098G01 | FIXTURE,MACHINE-NO.4 BEARING S | 1 | |
| 2C7146 | FIXTURE,HOLDING-NO.4R BEARING | 1 | |
| 2C7146G01 | FIXTURE,HOLDING-NO.4R BEARING | 1 | |
| 2C7147G02 | FIXTURE, HOLDING, ROT AIR SEAL, NO. 4 BEARING | 1 | |
| 2C7147P02 | FIXTURE, HOLDING, ROT AIR SEAL, NO. 4 BEARING | 1 | |
| 2C7154 | FIXTURE,WELD,SPOT-NO.4 BEARING | 1 | |
| 2C7154G01 | FIXTURE,WELD,SPOT-NO.4 BEARING | 1 | |
| 2C81170G01 | Fixture, Assy/Dis-Assy No.4 Bearing Outer Race | 1 | |
| 2C81324G01 | Fixture, Puller - No 3 Bearing Components | 1 | |
| 2C81330G01 | Fixture, Install / Remove No 3 Bearing Outer Race | 1 | |
| 2C81628G01 | Fixture,removal-bearings pto | 1 | |
| 2C81668G01 | FIXTURE, REMOVAL, BEARING, AXI | 1 | |
| 2C91075G01 | FIXTURE - #3 BEARING O/R | 1 | |
| 2C91078G01 | FIXTURE - #3 BEARING I/R | 1 | |
| 2C91175G01 | FIXTURE-REMOVAL PTO BEARING | 1 | |
| 3176-4 | BEARING ASSEMBLING PRESS-IN FIXTURE | 1 | |
| 330A93-2024-20 | BLOCK,BEARING FIXTURE | 1 | |
| 330A93-3412-00 | TOOL, BALL BEARING CAGE FIXTURE | 1 | |
| 330A93341200 | TOOL,BALL BEARING CAGE FIXTURE | 1 | |
| 35009-0-2000 | Bearing Press Fixture | 1 | |
| 362395TF1 | Test Fixture - Bearing Free Play | 1 | |
| 3C4334P01 | #4 BEARING SEATING FIXTURE | 1 | |
| 4164003-8 | ROTOR BEARING DISASSEMBLY FIXTURE (2 IT) | 1 | |
| 43100-20-2002-X | BEARING ASSEMBLY FIXTURE | 1 | |
| 473015 | REPLACEMENT HOSES TOOL NO. 473015 THIS KIT CONTAINS ALL HYDRAULIC SEALS CAPABLE OF REBUILDING ONE HYDRAULIC JACK OF THE AA293268 CYLINDER HEAD/MAIN BEARING HYDRAULIC FIXTURE. | 1 | |
| 5006122 | BEARING - THRUST FIXTURE (5 ITEMS) | 1 | |
| 570-3877-02 | BEARING ALIGNMENT FIXTURE | 1 | |
| 570-3983-02 | BEARING ALIGNMENT AND PRELOAD FIXTURE | 1 | |
| 5838151-1 | FIXTURE, BEARING MEASUREMENT | 2 | |
| 617-4431-001 | BEARING PREOLAD FIXTURE | 1 | |
| 65-44761-F12 | Bearing Assembly Fixture | 1 | |
| 65885T2 | Bearing Installation Holding Fixture | 1 | |
| 65885T3 | Bearing Removal Holding Fixture | 1 | |
| 6796945 | FIXTURE – INSPECTION, OUT OF ROUD BEARING OUTER RING | 1 | |
| 6796964 | FIXTURE – CHECK, BEARING INTERNAL CLEARANCE | 1 | |
| 6799650 | FIXTURE – WELD, TURBINE REAR BEARING SUPPORT | 2 | |
| 6872781 | FIXTURE - ALIGNMENT, BEARING BORE | 1 | |
| 6887819 | Fixture â Checking, Gas Producer and Power Turbine Supports Bearing Bores | 2 | |
| 6893384 | FIXTURE - ALIGNMENT, BEARING BORE | 1 | |
| 7C2205 | FIXTURE, HEATER-NO 4 BEARING | 1 | |
| 831132-1 | Bearing Press Fixture Split Plate | 1 | |
| 831630 | Fixture, Flush, No. 2 Bearing Seal Retainer | 1 | |
| 833126-1 | BEARING ASSEMBLY FIXTURE | 1 | |
| 833129-1 | BEARING AND GEAR REMOVAL FIXTURE | 1 | |
| 833201-1 | FIXTURE BEARING PRESSING | 1 | |
| 833202-1 | SET FIXTURE BEARING PRESSING | 1 | |
| 833207 | FIXTURE BEARING INSTALLATION | 1 | |
| 833207-1 | FIXTURE-BEARING INSTALLATION | 2 | |
| 833207-1PM | FIXTURE-BEARING INSTALLATION | 1 | |
| 833283-1 | Bearing Preload check fixture | 1 | |
| 833283-1PM | BEARING PRELOAD CHECK FIXTURE | 1 | |
| 833437-1 | FIXTURE, BEARING PRESS | 1 | |
| 833438-2 | FIXTURE BEARING PRESS | 1 | |
| 833472-1 | FIXTURE BEARING REMOVAL | 1 | |
| 833545-1 | FIXTURE BEARING REMOVAL | 1 | |
| 833916-1 | FIXTURE REMOVAL BEARING AND SPACER | 1 | |
| 833916-2 | BEARING & SPACER REMOVAL FIXTURE | 1 | |
| 834236-1 | Bearing Check Fixture | 1 | |
| 834236-1PM | BEARING CHECK FIXTURE | 1 | |
| 834236-2 | BEARING CHECK FIXTURE | 1 | |
| 834269-1 | Bearing Installer Fixture | 1 | |
| 834331-1 | Bearing Removal Fixture | 1 | |
| 834341-1 | Bearing Indicator Fixture | 1 | |
| 834341-1PM | BEARING INDICATOR FIXTURE | 1 | |
| 834447-1 | SEAL REMOVAL FIXTURE (SUPPORTS 3810187-2 BEARING INLET HOUSING ASSEMBLY DURING REMOVAL OF 3611175-1 | 1 | |
| 834541-1 | THRUST BEARING END PLAY MEASURING FIXTURE | 2 | |
| 834587 | FIXTURE INSTALLER BEARING | 2 | |
| 834587-1 | FIXTURE INSTALLER BEARING | 1 | |
| 834695-1 | Bearing Installer Fixture | 1 | |
| 835689-1 | BEARING PRESS FIXTURE | 1 | |
| 835700-1 | BEARING PRESS FIXTURE | 1 | |
| 835701-1 | BEARING PRESS FIXTURE | 1 | |
| 835703-1 | BEARING PRESS FIXTURE | 1 | |
| 835869-1 | Bearing Press Fixture | 1 | |
| 856A 2826G03 | FIXTURE HOLDING NO.4 BEARING | 2 | |
| 856A 3358G03 | FIXTURE HOLDING NO.4BEARINGINNER RACE BOLT | 3 | |
| 856A1035 | FIXTURE, HOLDING - NO. 3 BEARING IGB RETAINER NUT | 1 | |
| 856A1035G01 | FIXTURE, HOLDING - NO. 3 BEARING IGB RETAINER NUT | 9 | |
| 856A1038 | FIXTURE, INSTALLATION - IGB BEARING AND SPACER | 1 | |
| 856A1038 G01 | Fixture Installation ‐ IGB Bearing & Spacer | 9 | |
| 856A1038G01 | Fixture, Installation - IGB Bearing and Spacer (installation fixture) | 9 | |
| 856A1040 | FIXTURE, REMOVAL - IGB BEARING AND SPACER | 1 | |
| 856A1040 G01 | Fixture Removal ‐ IGB Bearing and Spacer | 8 | |
| 856A1040G01 | Fixture, Removal - IGB Bearing and Spacer (removal fixture) | 8 | |
| 856A1111 G01 | No.4 Bearing Outer Race Fixture | 3 | |
| 856A1111G01 | NO.4 BEARING OUTER RACE FIXTURE | 3 | |
| 856A1171G05 | FIXTURE, PRESSURE TEST - SEAL, STATIONARY, NO. 3 BEARING AFT (PRESSURE TEST FIXTURE) | 1 | |
| 856A1171G06 | FIXTURE, PRESSURE TEST - SEAL, STATIONARY, NO. 3 BEARING AFT (PRESSURE TEST FIXTURE) | 2 | |
| 856A1211G01 | Fixture, Clamping - No. 3 Bearing Assembly, Inlet Gearbox (clamping fixture) | 9 | |
| 856A1356G02 | INSTALLATION N4 BEARING FIXTURE | 7 | |
| 856A1389G01 | FIXTURE, INSTALL - NO. 4 BEARING OUTER RACE | 8 | |
| 856A1426 | FIXTURE, TORQUE - NO. 4 BEARING RETAINER (TORQUE FIXTURE) | 1 | |
| 856A1426G01 | FIXTURE, TORQUE - NO. 4 BEARING RETAINER (TORQUE FIXTURE) | 4 | |
| 856A1426G02 | Fixture Torque #4 Bearing | 1 | |
| 856A1426G03 | Fixture Torque #4 Bearing | 3 | |
| 856A1430G02 | IGB HOLDING FIXTURE - BEARING REMOVAL | 7 | |
| 856A1478 | FIXTURE, REMOVAL - NO. 3 BEARING AFT STATIONARY SEAL (REMOVAL FIXTURE) | 1 | |
| 856A1478G02 | Fixture Puller #3 Bearing | 1 | |
| 856A1495G01 | Fixture Inspect #3 Bearing | 1 | |
| 856A1826 | FIXTURE, REMOVAL - NO. 3 BEARING AFT STATIONARY SEAL (REMOVAL FIXTURE) | 1 | |
| 856A1826G01 | FIXTURE, REMOVAL - NO. 3 BEARING AFT STATIONARY SEAL (REMOVAL FIXTURE) | 3 | |
| 856A1828 | FIXTURE, TORQUE NO. 4 BEARING RETAINER (TORQUE FIXTURE) | 1 | |
| 856A1828G01 | Torque Fixture No4 Bearing | 1 | |
| 856A1828G03 | Fixture, Torque No. 4 Bearing Retainer (torque fixture) | 6 | |
| 856A1865G01 | FIXTUE. TORQUE - NO. 3 BEARING LOCK NUT (TORQUE FIXTURE) | 3 | |
| 856A1865G03 | Fixture, Torque-N03 Bearing - this replaces 856A1000G09 | 1 | |
| 856A1865G04 | Fixture, Torque - No. 3 Bearing Lock Nut (torque fixture) | 6 | |
| 856A2340G01 | FIXTURE, TORQUE/LOOSEN - NO. 1 BEARING NUT | 3 | |
| 856A2341G03 | FIXTURE, PULLER/PRESS - NO. 2 ROLLER BEARING OUTER RACE | 1 | |
| 856A2690 | FIXTURE ALIGNMENT NO1 AND NO2 BEARING MODULE | 1 | |
| 856A2690G01 | FIXTURE ALIGNMENT NO1 AND NO2 BEARING MODULE | 5 | |
| 856A2693G03 | HOLDING FIXTURE - N°4 BEARING INNER | 1 | |
| 856A2723G03 | FIXTIJE. MCHINING, SLEEVE,ADJUSTING - NO. 5 BEARING (MACHINING FIXTURE) | 1 | |
| 856A2723G04 | FIXTURE, MACHINING - SLEEVE NO. 5 BEARING OUTER RACE | 2 | |
| 856A2798 | LOCKING FIXTURE AND SOCKET - AGB 31/71-TOOTH GEARSHAFT BALL BEARING NUT LOCKING (FIXTURE AND SOCKET) | 1 | |
| 856A2798G01 | LOCKING FIXTURE AND SOCKET- AGB 31/71-TOOTH GEARSHAFT BALL BEARING NUT | 5 | |
| 856A2822 | FIXTURE TORQUE NO4 BEARING RETAINER | 1 | |
| 856A2822G01 | FIXTURE TORQUE NO4 BEARING RETAINER | 1 | |
| 856A2822G02 | #4 BEARING RETAINER TORQUE FIXTURE | 2 | |
| 856A2822G03 | FIXTURE TORQUE #4 BEARING | 4 | |
| 856A2826 | HOLDING FIXTURE NO.4 BEARING | 1 | |
| 856A2826G01 | FIXTURE, HOLDING - NO. 4 BEARING INNER RACE BOLTS (HOLDING FIXTURE) | 1 | |
| 856A2826G02 | HOLDING FIXTURE - N°4 BEARING INNER | 1 | |
| 856A2826G03 | HOLDING FIXTURE - N4 BEARING INNER | 2 | |
| 856A2922 | FIXTURE, TORQUE/LOOSEN - NO. 1 BEARING NUT (TORQUE/LOOSEN FIXTURE) | 1 | |
| 856A2922G01 | Fixture, Torque/Loosen - No. 1 Bearing Nut (torque/loosen fixture) | 6 | |
| 856A2924G01 | Fixture, Checking Dim. V - No. 1 and No. 2 Bearing Support (checking fixture) | 6 | |
| 856A3017 G01 | Fixture Torque‐No. 1 Bearing Housing | 1 | |
| 856A3017 G05 | Fixture Torque‐No. 1 Bearing Housing | 8 | |
| 856A3017G05 | FIXTURE TORQUE-NO.1 BEARING | 8 | |
| 856A3030G02 | FIXTURE, TORQUE - NO. 1 BEARING HOUSING | 5 | |
| 856A3265 | FIXTURE, MACHINING - SLEEVE, NO. 5 BEARING OUTER RACE | 1 | |
| 856A3265G03 | FIXTURE, MACHINING - SLEEVE, NO. 5 BEARING OUTER RACE | 2 | |
| 856A3265G04 | MACHING FIXTURE FOR OIL DAMPER NO.5 BEARING | 4 | |
| 856A3358 | FIXTURE, HOLDING - NO. 4 BEARING INNER RACE BOLTS | 1 | |
| 856A3358G03 | FIXTURE, HOLDING - NO. 4 BEARING INNER RACE BOLTS(HOLDING FIXTURE)OBSELETE REPLACED BY 856A3358G04 THEN 856A3358G05 | 3 | |
| 856A3358G04 | FIXTURE, HOLDING - NO. 4 BEARING INNER RACE BOLTS | 2 | |
| 856A3358G05 | Fixture, Holding - No. 4 Bearing Inner Race Bolts (holding fixture) | 4 | |
| 856A3487G02 | FIXTURE # BALL BEAR.4 THE TOOL IS USED TO PROTECT THE NO. 4 BALL BEARING | 4 | |
| 856A3722 | FIXTURE, INSTALLATION - NO. 1 BEARING SUPPORT (INSTALLATION FIXTURE) | 1 | |
| 856A3722G01 | Fixture Install #1-2 Bearing Support | 1 | |
| 856A3722G02 | FIXTURE, INSTALLATION - NO. 1 BEARING SUPPORT (INSTALLATION FIXTURE) | 1 | |
| 856A3722G04 | Fixture, Installation - No. 1 Bearing Support (installation fixture) | 9 | |
| 856A3738 | FIXTURE, TORQUE / LOOSEN NO 1 BEARING NUT. | 1 | |
| 856A3738G01 | Fixture Torque Loosen NB 1 Bearing Nut | 9 | |
| 856A3738G01 | FIXTURE, TORQUE / LOOSEN - #1 BEARING NUT | 9 | |
| 856A3739G01 | Fixture Install Oil Nozzle Bearing 2 | 1 | |
| 856A3739G02 | Fixture, Installation - No. 2 Bearing Oil Nozzle (installation fixture) | 3 | |
| 856A3783 | FIXTURE CHECKING, NO 1 & NO 2 BEARING SUPPORT | 1 | |
| 856A3783G01 | Fixture, Check Dim 'V' N1&2 Bearing Support | 1 | |
| 856A3783G02 | FIXTURE CHECKING, NO 1 & NO 2 BEARING SUPPORT | 6 | |
| 856A3791 | FIXTURE, MACHINING, SLEEVE, ADJUSTING - NO. 5 BEARING (MACHINING FIXTURE) | 1 | |
| 856A3791G03 | FIXTURE, MACHINING, SLEEVE, ADJUSTING - NO. 5 BEARING (MACHINING FIXTURE) | 1 | |
| 856A3791G04 | Fixture, Machining, Sleeve, Adjusting - No. 5 Bearing | 4 | |
| 856A3913 | FIXTURE, CHECKING - ASSEMBLY/TRF WITH NO. 5 BEARING SUPPORT (CHECKING FIXTURE) | 1 | |
| 856A3913G01 | Fixture, Checking - Assembly/TRF with No. 5 Bearing Support | 2 | |
| 856A3913G03 | Fixture, Checking - Assembly/TRF with No. 5 Bearing Support (checking fixture) | 6 | |
| 856A3918 | FIXTURE, PULLER / PRESS NO 2 ROLLER BEARING OUTER RACE | 1 | |
| 856A3918G01 | FIXTURE, PULLER / PRESS NO 2 ROLLER BEARING OUTER RACE | 1 | |
| 856A3918G02 | FIXTURE, PULLER / PRESS NO 2 ROLLER BEARING OUTER RACE | 2 | |
| 856A3918G03 | Fixture, Puller/Press - No. 2 Roller Bearing Outer Race (puller/press fixture) | 4 | |
| 856A4026G02 | FIXTURE MACHINING NO. 3 BEARING FORWARD STATIONARY OIL SEAL | 1 | |
| 856A4065G01 | FIXTURE, THREAD REPAIR -NO. 3 BEARING LOCKNUT | 1 | |
| 8574813 | Fixture – Assembly, Housing Bearing | 1 | |
| 8943-0-2000 | Bearing Press Fixture | 1 | |
| 8945-0-2001-R | Bearing Removal Fixture | 1 | |
| 8951 | BEARING REMOVAL FIXTURE | 1 | |
| 8951-0-2001-R | Bearing Removal Fixture | 1 | |
| 8951/895100 | BEARING REMOVAL FIXTURE | 1 | |
| 8955-0-2000 | Bearing Press Fixture | 1 | |
| 8C2067 | FIXTURE, INSTALLATION - #4 BEARING CARBON SEAL | 1 | |
| 8C2067G03 | fixture installation no 4 bearing carbon seal holder | 1 | |
| 8C2071 | FIXTURE, REMOVAL - CARBON SEAL, NO. 4 BEARING | 1 | |
| 8C2071G01 | fixture removal no 4 bearing carbon seal | 1 | |
| 8C2071G02 | fixture removal no 4 bearing carbon seal | 1 | |
| 8C2421G01 | Fixture，torque-No 5 bearing spanner nut | 1 | |
| 8C2423G01 | Fixture,installation-no 5 bearing carbon seal | 1 | |
| 8C2465G01 | Fixture Install/Remove-Bearing Race | 1 | |
| 8C2502 | FIXTURE, LIFT & TURN - NO. 1 BEARING SUPPORT HOUSING | 1 | |
| 8C2502G01 | Fixture Lift-Turn-No 1Bearing Suppor | 1 | |
| 8C2511 | FIXTURE, PUSHER/PULLER CARBON SEAL NO. 1 BEARING | 1 | |
| 8C2511G01 | Fixture, Pusher/Puller-Carbon Seal, Sp No 1 Bearing | 1 | |
| 8C2513G01 | Fixture Install-No 1 Bearing Carbon Seal | 1 | |
| 8C2514 | FIXTURE, TEST - CARBON SEAL - NO. 1 BEARING | 1 | |
| 8C2514G01 | Fixture,test-carbon seal,no 1 bearing | 1 | |
| 8C2530 | FIXTURE, LIFT AND TURN NO. 2 BEARING HOUSING | 1 | |
| 8C2530G01 | Fixture,lift&turn-no 2 bearing housing | 1 | |
| 8C2532 | FIXTURE, HEAT GUN - NO. 2 BEARING HOUSING | 1 | |
| 8C2532G01 | Fixture, Heat Gun - No. 2 Bearing Housing | 1 | |
| 8C2535 | SEATING FIXTURE, NO. 1 BEARING, RLR, CYL, INNER RACE | 1 | |
| 8C2540 | FIXTURE, SEATING - NO. 2 BEARING INNER RACE | 1 | |
| 8C2553G01 | Fixture Lift-No.1 Bearing Support Aft | 1 | |
| 8C2913G02 | Fixture,seating,check-No.2 bearing | 1 | |
| 8C2917 | FIXTURE, ALIGNMENT TUBE NO. 1 BEARING OIL SUPPLY | 1 | |
| 907816-1-1 | THRUST-BEARING END PLAY MEASURING FIXTURE | 1 | |
| 9446M39G01 | Fixture, Build- No 4 Bearing Housing | 1 | |
| 9446M39G02 | Fixture, Buildno 4 Bearing Housing | 1 | |
| 956A1036 | FIXTURE - RESTRAINING - HOUSING - NO. 4 BEARING | 1 | |
| 956A1036G01 | Fixture restraining housing no 4 bearing | 1 | |
| 956A1037 | FIXTURE - RESTRAINING - FWD ROTATING OIL SEAL NO. 4 BEARING | 1 | |
| 956A1037G01 | Fixture,restraining-fwd rotating oil seal no 4 bearing | 1 | |
| 956A1037G02 | Fixture,restraining-fwd rotating oil seal no 4 bearing | 1 | |
| 956A1066 | FIXTURE - INSTALL - NO. 4 BEARING OUTER RACE | 1 | |
| 956A1098 | FIXTURE - LEAKAGE TEST-CARBON SEAL - N0 4. BEARING | 1 | |
| 956A1308 | FIXTURE - TORQUE - NO. 3 BEARING | 1 | |
| 956A1511 | FIXTURE - TORQUE - LOCKNUT - 3B BEARING | 1 | |
| 956A1511G01 | Fixture,torque-locknut,3b,bearing | 1 | |
| 956A1513 | FIXTURE - REMOVAL - PINION BEARING | 1 | |
| 956A1513G01 | Fixture, removal- pinion bearing | 1 | |
| 956A1514 | FIXTURE - REMOVAL - OUTER RACER - 3R BEARING | 1 | |
| 956A1526 | FIXTURE - LOADING BALL BEARINGS LEAP 1A/1C | 1 | |
| 956A1526G01 | Fixture,Loading Ball Bearings Leap 1a/1c | 1 | |
| 956A1817G01 | Fixture, Installation - Retaining Ring, No 4 Bearing Spanner Nut | 1 | |
| 956A3093 | FIXTURE - LEAKAGE TEST - CARBON SEAL - NO. 4 BEARING | 1 | |
| 956A3093G01 | Fixture,leakage test-carbon seal No 4 bearing | 1 | |
| 956A3093G02 | Fixture,leakage test-carbon seal No 4 bearing | 1 | |
| 956A3093G03 | Fixture,leakage test-carbon seal No 4 bearing | 1 | |
| 956A3094G02 | fixture install remove carbon seal no 4 bearing | 1 | |
| 956A3308 | FIXTURE - TORQUE - NO. 3 BEARING | 1 | |
| 956A3401 | FIXTURE - INSTALLATION - RETAINING RING - NO 4 BEARING SPANNER NUT | 1 | |
| 956A3401G01 | Fixture installation retaining ring no 4 bearing spanner nut | 1 | |
| 956A3401G02 | Fixture installation retaining ring no 4 bearing spanner nut | 1 | |
| 956A3504G01 | ffixture install remove seal rotating oil number 3 bearing | 1 | |
| 956A3531G02 | Fixture,torque-locknut.3B bearing | 1 | |
| 956A3532 | FIXTURE - REMOVAL - BEARING RACE | 1 | |
| 956A3538G01 | Fixture,puller-inner ring,3r bearing | 1 | |
| 956A6006 | FIXTURE, GUIDE - NO.1-2 BEARING SUPPORT | 1 | |
| 956A6006G02 | Fixture guide no1-2 bearing support | 1 | |
| 956A6010 | FIXTURE - GUIDE - NO. 1-2 BEARING SUPPORT | 1 | |
| 956A6010G04 | Fixture,guide-1-2 bearing support | 1 | |
| 956A6027 | FIXTURE - LIFT & TURN - BEARING SUPPORT 1/2 | 1 | |
| 956A6027G01 | Fixture,lift and turn -bearing spt 1-2 | 1 | |
| 956A6027G02 | Fixture,lift and turn -bearing spt 1-2 | 1 | |
| 956A6028 | FIXTURE - LIFT VARIABLE CG - BEARING SPT 1 & 2 | 1 | |
| 956A6028G03 | Fixture,lift variable cg-bearing spt 1-2 | 1 | |
| 956A6030 | FIXTURE - GUIDE - BEARING SPT 1-2 | 1 | |
| 956A6034 | FIXTURE - CHECK - NIPPLE LOCATION - BEARING # 2 | 1 | |
| 956A6215 | FIXTURE - SUPPORT - BEARING - TGB | 1 | |
| 956A6263P01 | Fixture,support-bearing,agb support d emmanchement | 1 | |
| 956A6265P01 | Fixture support bearing agb | 1 | |
| 956A6304 | FIXTURE, RESTRAIN-ROTATING SEAL BEARING 4 | 1 | |
| 956A6304G01 | Fixture restrain rotating seal bearing 4 | 1 | |
| 956A6311 | FIXTURE - REMOVE - ROTATING SEAL BEARING 4 | 1 | |
| 956A6311G01 | Fixture remove rotating seal bearing 4 | 1 | |
| 956A6351 | FIXTURE - INSTALL - SLAVE - NO.5 BEARING | 1 | |
| 956A6351G01 | Fixture install slave no 5 bearing | 1 | |
| 956A6352 | FIXTURE - LIFT - SLAVE - NO.5 BEARING | 1 | |
| 956A6352G01 | Fixture,lift-slave,no.5 bearing palonnier fausse piste palier 5 | 1 | |
| 956A6352G02 | Fixture,lift-slave,no.5 bearing palonnier fausse piste palier 5 | 1 | |
| 956A6483 | FIXTURE - PUSHER - LPT RING -SEAL BEARING 5 | 1 | |
| 956A6483G02 | Fixture,pusher-lpt ring.seal-bearing 5 | 1 | |
| 956A6491 | FIXTURE - PULLER - LPT RING -SEAL BEARING 5 | 1 | |
| 956A6491G02 | Fixture puller lpt ring seal bearing 5 | 1 | |
| 956A6492G01 | Fixture,remove-lpt,bearing 5 outillage extraction roulement palier 5 | 1 | |
| 956A6492G02 | Fixture,remove-lpt,bearing 5 outillage extraction roulement palier 5 | 1 | |
| 956A6523 | FIXTURE - REMOVE - NO.5 BEARING FERRULE | 1 | |
| 956A6523G02 | Fixture,removal-N.5 bearing Ferrule | 1 | |
| 956A6524 | FIXTURE - REMOVAL - NO.5 BEARING OUTER CASE | 1 | |
| 956A6524G02 | Fixture,removal-N.5 bearing outer case | 1 | |
| 956A6525 | FIXTURE - REMOVE - NO.5 BEARING SQUEEZE FILM | 1 | |
| 956A6525G02 | Fixture,remove-No.5 bearing squeeze film | 1 | |
| 956A6527G01 | Fixture,remove-No.5 bearing squeeze film | 1 | |
| 956A6541 | FIXTURE - TORQUING - LOCKING NUT BEARING 5 | 1 | |
| 956A6541G01 | Fixture, Torquing-Locking Nut Bearing 5 | 1 | |
| 956A6541G02 | Fixture, Torquing-Locking Nut Bearing 5 | 1 | |
| 956A6541G03 | Fixture, Torquing-Locking Nut Bearing 5 | 1 | |
| 956A6556G02 | Fixture,lift-No.5 bearing support | 1 | |
| 956A6556G03 | Fixture,lift-No.5 bearing support | 1 | |
| 956A6559 | FIXTURE - HEATER - NO.5 BEARING FERRULE | 1 | |
| 956A6559G02 | Fixture Heater-No.5 Bearing Ferrule | 1 | |
| 956A6560 | FIXTURE - RESTRAINING - NO.5 BEARING FERRULE | 1 | |
| 956A6560G02 | Fixture Restraining-No5 Bearing Ferrule | 1 | |
| 956A6561 | FIXTURE - HEATER - NO.5 BEARING SQUEEZE FILM | 1 | |
| 956A6561G01 | Fixture heater no 5 bearing squeeze film | 1 | |
| 956A6561G02 | Fixture heater no 5 bearing squeeze film | 1 | |
| 956A6561G03 | Fixture heater no 5 bearing squeeze film | 1 | |
| 956A6562 | FIXTURE - RESTRAINING - NO.5 BEARING SQUEEZE FILM | 1 | |
| 956A6562G02 | Fixture restraining-NO.5 bearing squeeze film | 1 | |
| 956A6572 | FIXTURE - HEATER - NO.5 BEARING OUTER RACE | 1 | |
| 956A6572G02 | Fixture,heater-no.5 bearing outer race diffuseur de chauffe support palier6 | 1 | |
| 956A6572G03 | Fixture,heater-no.5 bearing outer race diffuseur de chauffe support palier7 | 1 | |
| 956A6576 | FIXTURE - RESTRAINER - NO.5 BEARING OUTER RACE | 1 | |
| 956A6576G01 | Fixture,restrainer-outer race,bearing 5 | 1 | |
| 956A6581 | FIXTURE - LIFT - NO.5 BEARING SUPPORT EQUIPPED | 1 | |
| 956A6581G01 | Fixture,lift-N°5 bearingsupportequipped | 1 | |
| 956A6604 | FIXTURE - HEATER - REAR SEAL NO.5 BEARING | 1 | |
| 956A6617 | FIXTURE, FLOW CHECK - CARBON SEAL NO.5 BEARING | 1 | |
| 956A6619 | FIXTURE - CENTERING - CARBON SEAL NO.5 BEARING | 1 | |
| 956A6802G02 | Fixture,assy/disassy -support bearing 2 | 1 | |
| 956A6803 | FIXTURE, INSTALL/REMOVE-SUPPORT BEARING 2 | 1 | |
| 956A6803G01 | Fixture，install/remove-support bearing 2 | 1 | |
| 956A6804 | FIXTURE FOR SUPPORT BEARING 1 ASSEMBLY WITH BEARING 1 | 1 | |
| 956A6804G01 | Fixture assy/disassy-support bearing 1 | 1 | |
| 956A6805 | FIXTURE FOR SUPPORT BEARING 1 INSTALLATION | 1 | |
| 956A6805G02 | Fixture，install/remove-support bearing1 pied de montage SP1 sur module | 1 | |
| 956A6806G01 | Fixture Torque-Bearing 2 Inner Race | 1 | |
| 956A6807G01 | Fixture，torque-bearing 2 outer race | 1 | |
| 956A6809G01 | Fixture Torque-Nut Bearing 1 | 1 | |
| 956A6810 | FIXTURE - LIFT AND TURN - 1 & 2 BEARING SUPPORT | 1 | |
| 956A6810G03 | Fixture lift and turn bearing support 1/2 | 1 | |
| 956A6811 | FIXTURE, LIFTING - BEARING SUPPORT 1/2 | 1 | |
| 956A6811G01 | Fixture,lifting-bearing support 1/2 | 1 | |
| 956A6814 | FIXTURE, REMOVE - BEARING 2 INNER RACE | 1 | |
| 956A6814G01 | Fixture remove bearing 2 inner race | 1 | |
| 956A6815G01 | Fixture,remove-bearing 2 outer race | 1 | |
| 956A6816 | FIXTURE, REMOVE - BEARING 1 INNER RACE | 1 | |
| 956A6816G02 | Fixture,remove-bearing 1 inner race | 1 | |
| 956A6816G03 | Fixture,remove-bearing 1 inner race | 1 | |
| 956A6817G01 | Fixture,lifting,shaft no 1&2 bearing support | 1 | |
| 956A6817G02 | Fixture,lifting,shaft no 1&2 bearing support | 1 | |
| 956A6818 | FIXTURE - REMOVE - SUPPORT BEARING 2 ASSY | 1 | |
| 956A6818G01 | Fixture，remove-support bearing 2 assy | 1 | |
| 956A6821 | FIXTURE, LIFTING - SUPPORT BEARING 2 ASSY | 1 | |
| 956A6821G01 | Fixture,lifting-support bearing 2 assy | 1 | |
| 956A6823 | FIXTURE, LIFTING - SUPPORT BEARING 1 ASSY | 1 | |
| 956A6823G01 | Fixture，lifting-support bearing 1 assy | 1 | |
| 956A6823G02 | Fixture,lifting-support bearing 1 assy | 1 | |
| 956A6823G03 | Fixture，lifting-support bearing 1 assy | 1 | |
| 956A6824G01 | Fixture,Guide-N°2Bearing Support Assembly Cone Guidage Assemblage Sp2 | 1 | |
| 956A6827 | FIXTURE - LIFTING - AND TURN - SHAFT - SUPPORT BEARING 2 | 1 | |
| 956A6828 | FIXTURE LEAKAGE TEST - BEARING SUPPORT 1/2 | 1 | |
| 956A6828G01 | Fixture leakage test-bearing support 1/2 | 1 | |
| 956A6828G02 | Fixture leakage test-bearing support 1/2 | 1 | |
| 956A6829 | FIXTURE - RETAINING - BEARING 2 INNER RACE | 1 | |
| 956A6829G01 | Fixture Retaining-Bearing 2 Inner Race | 1 | |
| 956A6830P01 | Fixture,retaining-bearing 2 outer race | 1 | |
| 956A6831 | FIXTURE - RETAINING - BEARING 1 INNER RACE | 1 | |
| 956A6831G01 | Fixture Retaining-Bearing 1 | 1 | |
| 956A6832 | FIXTURE - RETAINING - SUPPORT BEARING 2 | 1 | |
| 956A6843 | FIXTURE - POSITIONING BEARING SUPPORT 1/2 | 1 | |
| 956A6843G01 | Fixture,postioning-support bearing 1/2 | 1 | |
| 956A6845 | FIXTURE - POSTIONNING - TUBES BEARING SUPPORT 1/2 | 1 | |
| 956A6845G01 | Fixture,Postionning Of Tubes-Bearing Support 1/2 Gabarit Positionement Destubes | 1 | |
| 956A6847 | FIXTURE - INSTALL/REMOVE BEARING SUPPORT 1/2 | 1 | |
| 956A6847G01 | Fixture，install/remove-support bearing 1/2 | 1 | |
| 956A6849 | FIXTURE - MEASURING BEARING SUPPORT 1/2 | 1 | |
| 956A6912P01 | Fixture,support-line 1 bearing agb | 1 | |
| 956A6913P01 | Fixture,support-line 3 bearing agb | 1 | |
| 956A6916G01 | Fixture,support-line 4 bearing agb | 1 | |
| 956A6920P01 | Fixture,support-line 5 bearing agb | 1 | |
| 956A6923P01 | Fixture,support-line 5 bearing agb | 1 | |
| 956A6925P01 | Fixture,support-line 6 bearing agb | 1 | |
| 956A6985 | FIXTURE - SUPPORT LINE 1-LINE 2 - BEARING TGB | 1 | |
| 956A6985P01 | Fixture,support l1&l2 bearing,tgb | 1 | |
| 956A8002 | FIXTURE - GUIDE - 1-2 BEARING SUPPORT | 1 | |
| 956A8002G01 | Fixture guide n1-2 bearing support | 1 | |
| 956A8004 | FIXTURE - LIFT AND TURN - BEARING 1/2 | 1 | |
| 956A8004G01 | Fixture，lift and turn-bearing 1/2 | 1 | |
| 956A8006 | FIXTURE - GUIDE - BEARING 1/2 SUPPORT | 1 | |
| 956A8006G01 | Fixture,guide bearing 1/2 support | 1 | |
| 956A8025 | FIXTURE - CHECK - NOZZLE - OIL BEARING 2 | 1 | |
| 956A8025G01 | Fixture，check-nozzle,oil bearing 2 | 1 | |
| 956A8113 | FIXTURE - REMOVE - HOUSING - BEARING 3 DAMPER | 1 | |
| 956A8113G01 | Fixture,remove-housing,bearing 3 damper | 1 | |
| 956A8113G02 | Fixture,remove-housing,bearing 3 damper | 1 | |
| 956A8113G03 | Fixture,remove-housing,bearing 3 damper | 1 | |
| 956A8301G01 | Fixture Torque-Nut Bearing 5 | 1 | |
| 956A8492 | FIXTURE - ASSEMBLY STAND - NO.5 BEARING SUPPORT | 1 | |
| 956A8492G02 | fixture support #5 support bearing | 1 | |
| 956A8493 | FIXTURE - VARIABLE CG - NO.5 BEARING SUPPORT | 1 | |
| 956A8493G01 | Fixture,variable cg-No.5 bearing support | 1 | |
| 956A8495 | FIXTURE - INSTALL - NO.5 BEARING SQUEEZE FILM | 1 | |
| 956A8495G01 | Fixture Install-N°5 Bearing Squeeze Film | 1 | |
| 956A8496G01 | Fixture Install-N°5 Bearing Squeeze Film | 1 | |
| 956A8498 | FIXTURE - RESTRAIN - LPT BEARING 5 ASSY | 1 | |
| 956A8498G03 | Fixture,restrain-lpt bearing 5 assy | 1 | |
| 956A8541 | FIXTURE - LIFT AND TURN - NO.5 BEARING SUPPORT | 1 | |
| 956A8541G01 | Fixture,lift and turn-No.5 bearing support | 1 | |
| 956A8541G02 | Fixture,lift and turn-No.5 bearing support | 1 | |
| 956A8541G03 | Fixture,lift and turn-No.5 bearing support | 1 | |
| 956A8802 | FIXTURE - ASSY/DISASSY - SUPPORT BEARING 2 | 1 | |
| 956A8802G02 | Fixture,assy-disassy support bearing 2 | 1 | |
| 956A8803 | FIXTURE - INSTALL/REMOVE- SUPPORT BEARING 2 | 1 | |
| 956A8803G01 | Fixture，install-remove support bearing 2 | 1 | |
| 956A8804 | FIXTURE - ASSY/DISASSY - SUPPORT BEARING 1 | 1 | |
| 956A8805 | FIXTURE - INSTALL/REMOVE- SUPPORT BEARING 1 | 1 | |
| 956A8805G01 | Fixture,install-remove support bearing 1 | 1 | |
| 956A8806 | FIXTURE - TORQUE - BEARING 2 INNER RACE | 1 | |
| 956A8806G02 | Fixture,torque-bearing 2 inner race | 1 | |
| 956A8806G03 | Fixture,torque-bearing 2 inner race | 1 | |
| 956A8807 | FIXTURE - TORQUE - BEARING 2 OUTER RACE | 1 | |
| 956A8807G01 | Fixture,torque-bearing 2 outer race | 1 | |
| 956A8809 | FIXTURE - TORQUE - NUT BEARING 1 | 1 | |
| 956A8809G01 | Fixture torque -nut bearing 1 | 1 | |
| 956A8810 | FIXTURE - LIFT AND TURN - 1 & 2 BEARING SUPPORT | 1 | |
| 956A8811 | FIXTURE - LIFTING - 1 & 2 BEARING SUPPORT/FAN & BOOSTER ASSY | 1 | |
| 956A8811G01 | Fixture,lifting-1&2 bearing support/fan&booster assy | 1 | |
| 956A8814 | FIXTURE - REMOVE - BEARING 2 INNER RACE | 1 | |
| 956A8814G01 | Fixture，remove-bearing2 innerrace | 1 | |
| 956A8816 | FIXTURE - REMOVE - BEARING 1 INNER RACE | 1 | |
| 956A8816G01 | Fixture remove bearing 1 inner race | 1 | |
| 956A8816G02 | Fixture remove bearing 1 inner race | 1 | |
| 956A8817 | FIXTURE - REMOVE - SUPPORT BEARING 2 ASSY | 1 | |
| 956A8817G02 | Fixture remove support bearing 2 assy | 1 | |
| 956A8820 | FIXTURE - LIFTING - SUPPORT BEARING 2 ASSY | 1 | |
| 956A8820G01 | Fixture,lift-support bearing 2 assy | 1 | |
| 956A8822 | FIXTURE - LIFTING - SUPPORT BEARING 1 ASSY | 1 | |
| 956A8822G01 | Fixture lifting support bearing 1 assy | 1 | |
| 956A8825 | FIXTURE - LIFTING AND TURN - SHAFT / SUPPORT BEARING 2 | 1 | |
| 956A8825G01 | Fixture,lifting and turn-shaft/support bearing 2 levage-retournement module sana sp1 | 1 | |
| 956A8826 | FIXTURE - LEAKAGE TEST - BEARING SUPPORT 1/2 | 1 | |
| 956A8826G01 | Fixture,leakage test-bearing support 1/2 | 1 | |
| 956A8827 | FIXTURE - RETAINING - BEARING 2 INNER RACE | 1 | |
| 956A8827G01 | Fixture,retaining-bearing 2 inner race | 1 | |
| 956A8828 | FIXTURE - RETAINING - BEARING 2 OUTER RACE | 1 | |
| 956A8828P01 | Fixture，retaining-bearing 2 outer race | 1 | |
| 956A8829 | FIXTURE - RETAINING - BEARING 1 INNER RACE | 1 | |
| 956A8830 | FIXTURE - RETAINING - SUPPORT BEARING 2 | 1 | |
| 956A8839 | FIXTURE - POSITIONING - TUBES - 1 & 2 BEARING SUPPORT | 1 | |
| 956A8839G01 | Fixture positioning tubes 1&2 bearing support | 1 | |
| 956A8840G01 | Fixture Measuring-Support Bearing 1/2 | 1 | |
| 956A8842 | FIXTURE - REMOVE - SUPPORT BEARING 2 | 1 | |
| 956A8842G01 | Fixture，remove-support bearing 2 | 1 | |
| 956A8843G01 | Fixture remove bearing 2 balls | 1 | |
| 956A8871 | FIXTURE - TORQUE - LPC AND BEARING SUPPORT | 1 | |
| 956A8871P01 | Fixture-torque lpc and bearing support | 1 | |
| 956A8909 | FIXTURE - SUPPORT - LINE 1 BEARING - TGB | 1 | |
| 956A8916 | FIXTURE - SUPPORT - LINE 1 BEARING - TGB | 1 | |
| 956A8942 | FIXTURE - SUPPORT - LINE 1 BEARING - AGB | 1 | |
| 956A8942P01 | Fixture support line 1 bearing agb | 1 | |
| 956A8954 | FIXTURE - SUPPORT - LINE 4 AND 5 BEARING - AGB | 1 | |
| 956A8955 | FIXTURE - SUPPORT - LINE 5 BEARING - AGB | 1 | |
| 956A8955P01 | Fixture support line5 bearing agb | 1 | |
| 956A8960 | FIXTURE - SUPPORT - LINE 6 AND 9 BEARING - AGB | 1 | |
| 956A8960P01 | Fixture,support-line 6and 9 bearing agb | 1 | |
| 956A8962 | FIXTURE - SUPPORT - LINE 6 - 7 AND 8 BEARING - AGB | 1 | |
| 956A8962P01 | Fixture support line6,7 and 8 bearing agb | 1 | |
| 956A8963 | FIXTURE - SUPPORT - LINE 7 BEARING - AGB | 1 | |
| 956A8963P01 | Fixture support line7 bearing agb | 1 | |
| 956A8966 | FIXTURE - SUPPORT - BEARING - AGB | 1 | |
| 956A8968 | FIXTURE - SUPPORT - LINE 9 BEARING - AGB | 1 | |
| 956A8968P01 | Fixture support line9 bearing agb | 1 | |
| 98A53703508000 | EXPANDING FIXTURE-NLG BEARING FITTING | 1 | |
| 9C1428G01 | Fixture,restraining-No 1 bearing support housing | 1 | |
| 9C2162G01 | Fixture inner race bearing roller cylindrical No1 | 1 | |
| 9C2365 | FIXTURE, HANDLING BEARING ASSEMBLY NO 2 | 1 | |
| 9C2365G03 | Fixture,handling bearing assembly No.2 | 1 | |
| 9C3016 | FIXTURE, TORQUE - NO.5 BEARING SPANNER NUT | 1 | |
| 9C3016G01 | FIXTURE, TORQUE - NO.5 BEARING SPANNER NUT | 1 | |
| 9C3067 | SUPERSEDED BY G02FIXTURE, RESTRAINING-NO 3 BEARING, ROTATING SEAL | 1 | |
| 9C3077G01 | Fixture,restraining-no 1 bearing stationary seal | 1 | |
| 9C3084 | FIXTURE, RESTRAINING-NO 5 BEARING SEAL HSG | 1 | |
| 9С3016G01 | FIXTURE, TORQUE NO.5 BEARING SPANNER NUT | 1 | |
| AGE10049 | BEARING ALIGNING FIXTURE | 2 | |
| AGE10049 (FBS-30129) | Bearing Assembly Fixture | 1 | |
| AGE10165 | BEARING PULLER FIXTURE ASSEMBLY | 1 | |
| AGE17630 | FIXTURE, HOLDING, BEARING LINER REMOVAL | 1 | |
| AGE17633 | FIXTURE, HOLDING, BEARING LINER INSTALL | 1 | |
| AGE17638 | Fixture, Holding, Bearing Liner Removal | 1 | |
| AGE17639 | Fixture, Holding Bearing Liner Install | 1 | |
| AT1 1 1 9 | BEARING PRESSING FIXTURE, | 1 | |
| AT3294 | FIXTURE, BEARING PRESSING, APU | 1 | |
| AT65-44835 | Bearing Assembly Fixture | 1 | |
| AT65-44835PM | BEARING ASSEMBLY FIXTURE - INSTALLING BEARINGS FOR INPUT SHAFT ASSEMBLY AT65-44835 | 1 | |
| BFG179-236 | FIXTURE BEARING CUP RENOVAL-INSTALLATION | 1 | |
| BOFAOGTOOL777LG7035 | SPL-17597 ,MLG BEAM AFT TRUNNION SPHERICAL BEARING BORING FIXTURE | 1 | |
| CPWA-30441 | Fixture – Loading #1 Bearing | 1 | |
| CPWA-30830 | Fixture, no. 1 bearing housing | 1 | |
| D15657 | BEARING REMOVAL FIXTURE - LOWER BEARING HOUSING | 1 | |
| DAPT60-0392-00-IAS | DOWTY PROP BEARING FIXTURE Q400 | 1 | |
| E54993 | BEARING TORQUE FIXTURE | 1 | |
| E54994 | BEARING TORQUE FIXTURE | 1 | |
| E56440 | BEARING TORQUE FIXTURE | 1 | |
| E56441 | BEARING TORQUE FIXTURE | 1 | |
| EP5262-195A | BEARING SUPPORT FLUSHING FIXTURE | 1 | |
| EP5262-242 | Governor Bearing Support Flushing Fixture | 1 | |
| Ex-71586 | Fixture, grinding, turbine front bearing retaining | 1 | |
| Ex-92647 | Fixture-holding, nose bearing plate | 1 | |
| Ex-97184 | Fixture-holding, nose bearing plate | 1 | |
| F-16181 | BEARING REMOVAL FIXTURE | 1 | |
| F80096-1 | HOLDING FIXTURE - FORWARD TRUNNION BEARING HOUSING, MAIN GEAR | 2 | |
| F80096-1 -4 -7 | Holding Fixture -Forward Trunnion Bearing Housing. Main Gear | 1 | |
| F80096-1-4-7 | MLG TRNION BEARING HOLD FIXTURE | 1 | |
| F80096-4 | HOLDING FIXTURE - FWD TRUNNION BEARING H | 10 | |
| F80096-7 | HOLDING FIXTURE ASSY-MLG FWD TRUNNION BEARING | 7 | |
| FBS-30129 | Bearing Assembly Fixture | 1 | |
| FBS-30132 | FIXTURE BEARING PULLER | 2 | |
| FBS30129 | BEARING ALIGNMENT FIXTURE | 1 | |
| FDS-41331 | FIXTURE (BEARING INSTALLATION) (2IT) | 1 | |
| FIG908 | BEARING CUP REMOVAL FROM SLEEVE FIXTURE | 1 | |
| FXT- 03934 | BEARING FIXTURE (3IT) | 1 | |
| FXT-03934 | BEARING PRESS FIXTURE | 1 | |
| FXT-09694 | BEARING HOLDING FIXTURE | 1 | |
| FXT03934 | BEARING PRESS FIXTURE | 1 | |
| FXT09694 | BEARING HOLDING FIXTURE | 1 | |
| GS10752 | BEARING ASSY FIXTURE | 1 | |
| GS10752-1 | FIXTURE - BEARING ASSY | 1 | |
| GS14698-1 | FIXTURE, BEARING INSERTER | 1 | |
| GS20382-1 | FIXTURE, BEARING PRESS | 1 | |
| GS22921-1 | FIXTURE, BEARING TORQUE | 1 | |
| HRC03780 | machining fixture hp/ip bearing support outer case assembly | 1 | |
| HS 9515 | FIXTURE CAM BEARING NUT TORQUE | 1 | |
| HS7566 | FIXTURE, CAM BEARING NUT | 1 | |
| HS9515 | FIXTURE, CAM BEARING NUT TORQUE | 1 | |
| LAG-5877 | BEARING CUP REMOVAL FROM SLEEVE FIXTURE | 1 | |
| LTCT7202-01 | FIXTURE, HOLDING NO. 4 AND 5 BEARING OIL TUBE | 1 | |
| LTCT7217 | Fixture, Pressure Test Bearing Support Assy. | 1 | |
| LTCT7493-01 | Fixture, Test, Pressure, No. 4/5 Bearing | 1 | |
| LTCT7508-01 | Fixture, No. 2 Bearing Package Pressure Check | 1 | |
| LTCT7515-01 | Fixture, No. 3 Bearing Housing Support Oil Flow | 1 | |
| LTCT7845-01 | Fixture, Flow, No. 2 Bearing Housing | 1 | |
| LTCT7879-01 | Fixture, Bearing Screen Repair | 1 | |
| PLF617-4431-001 | BEARING PRELOAD FIXTURE | 1 | |
| PR 135 | BEARING ASSEMBLING PRESS-IN FIXTURE | 1 | |
| PR135 | BEARING ASSEMBLING PRESS-IN FIXTURE | 1 | |
| PS10352 | BEARING PRESS FIXTURE | 1 | |
| PS10518 | BEARING PRESS FIXTURE | 1 | |
| PWA 12812 | Fixture Compr.rear bearing seal air pressure tube | 1 | |
| PWA 16197 | FIXTURE NO.6 BEARING SEAL HOUSING | 1 | |
| PWA 27860 | BEARINGFIXTURE TOOL | 2 | |
| PWA103114 | FIXTURE, HANDLING (NO. 2 BEARING SUPPORT ASSEMBLY) | 1 | |
| PWA111330 | FIXTURE, LEAK TEST - TIC, #4 BEARING FRONT SEAL ASSY | 1 | |
| PWA111331 | FIXTURE, LEAK TEST - TIC, #4 BEARING REAR SEAL ASSY | 1 | |
| PWA111499 | FIXTURE, SUPPORT - #3 BEARING AFT SEAL PLATE | 1 | |
| PWA111629 | FIXTURE, LEAK - #5 BEARING | 1 | |
| PWA111687 | FIXTURE,LEAK TEST-FIC,#2 BEARING SEAL ASSY | 1 | |
| PWA111730 | FIXTURE, RETAINER -#3 BEARING SUPPORT, SEAL RINGS | 1 | |
| PWA211566 | FIXTURE, LEAK TEST - FDGS, No.1 BEARING SEAL | 1 | |
| PWA25658 | FIXTURE - NO.1,2,3 BEARING FLUSHING_[PWA25658] | 1 | |
| PWA29647 | FIXTURE - SEAL ASSEMBLY, N1 & 2 BEARING_[PWA29647] | 2 | |
| PWA75913 | FIXTURE - HOLDG NO4 BEARING SEAL SPACER_REPLACESPWA27491BYT.B87-067_[PWA75913] | 1 | |
| PWA80811-8 | FIXTURE, ASSEMBLY-NO.1 BEARING SHOULDER STUDS | 1 | |
| PWA85375 | FIXTURE HANDLING ENG. ASSY HPC 2 BEARING FRONT CASE | 1 | |
| PWA85378 | FIXTURE HANDLING ENG. ASSY HPC 2 BEARING FRONT CASE | 1 | |
| PWA85379 | FIXTURE HANDLING ENG. ASSY HPC 2 BEARING FRONT CASE | 1 | |
| PWA85384 | FIXTURE HANDLING ENG. ASSY.HPC # 2 BEARING FRONT CASE | 1 | |
| PWA85390 | FIXTURE HANDLING ENG. ASSY.HPC # 2 BEARING FRONT CASE | 1 | |
| PWA85391 | FIXTURE HANDLING ENG. ASSY.HPC # 2 BEARING FRONT CASE | 1 | |
| PWA85403 | FIXTURE HANDLING ENG. ASSY.HPC # 2 BEARING FRONT CASE | 1 | |
| PWA85406 | FIXTURE HANDLING ENG. ASSY.HPC # 2 BEARING FRONT CASE | 1 | |
| PWC37029 | FIXTURE, LOADING, OIL PUMP DRIVE SHAFT BEARING | 1 | |
| PWC37726 | FIXTURE, LOADING, OIL PUMP TRANSFER SHAFT BEARING | 1 | |
| PWC37737 | LOADING FIXTURE, HP IMPELLER CLEARANCE, NO. 4 BEARING | 1 | |
| PWC38088 | Fixture, Lifting & Loading LP Rotor & No. 3 Bearing Housing | 1 | |
| PWC42079 | Holding Fixture No. 3 bearing housing | 1 | |
| PWC43522 | FIXTURE LOADING BEARING | 1 | |
| PWC50001 | FIXTURE, FLOW, BEARING SUPPORT SLEEVE | 2 | |
| PWC71016 | HOLDING FIXTURE -BEARING | 1 | |
| RB23033031 | Fixture-Holding Front Bearing Housing | 2 | |
| RB6887818 | Bearing Bore Alignment Fixture | 2 | |
| RB6887819 | FIXTURE----CHECKING, GAS PRODUCER AND POWER TURBINE SUPPORTS BEARING BORES | 1 | |
| RB6893384 | Bearing Bore Alignment Fixture | 1 | |
| RBE105-14181W1 | NEEDLE BEARINGS ASSEMBLY FIXTURE | 3 | |
| RBE330A93-3412-00 | Tool, Ball Bearing Cage Fixture | 2 | |
| REP4M6-4FS428 | BEARING REMOVE FIXTURE | 1 | |
| T-232794 | BEARING ASSEMBLY FIXTURE | 1 | |
| T-438959 | Fixture Bearing Removal | 1 | |
| T12252-1 | PISTON BEARING CUTTING FIXTURE | 1 | |
| T3009208 | BEARING PRELOAD SETTING FIXTURE | 1 | |
| T462168 | Bearing Holding Fixture | 1 | |
| T743806 | BEARING PRESS FIXTURE | 1 | |
| TAF00463 | BALL BEARING ASSEMBLY FIXTURE | 1 | |
| TAF00550 | BALL BEARING ASSEMBLY FIXTURE | 1 | |
| TES-3775 | Fixture,Bearing Assembly | 1 | |
| TES-3775PM | FIXTURE,BEARING ASSEMBLY | 1 | |
| page 9004 | Bearing Cup Removal from Sleeve Fixture | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
