| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| PWC30411 | Fixture Bal | 4 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) PWC66366 | FIXTURE - BALANCING | 1 | |
| 0U141312 | BALL FITTING FIXTURE | 1 | |
| 1078349 | BALANCING FIXTURE | 1 | |
| 1159CS20004-TEC | RUDDER / ELEVATOR BALANCE FIXTURE | 1 | |
| 1159CS20006-01-02 ICF | AILERON BALANCE FIXTURE | 1 | |
| 11C4413G05 | FIXTURE, INSTALL/REMOVE - TRIM BALANCE CLIP - STAGE 7 LPT BLADE | 1 | |
| 11C4609 | FIXTURE - INSTALL/REMOVE -TRIM BALANCE CLIP - STAGE 6 LPT BLADE | 1 | |
| 11C4609G04 | FIXTURE, INSTALL/REMOVE - TRIM BALANCE CLIP - STAGE 7 LPT BLADE | 1 | |
| 11C4645 | FIXTURE SPREAD BALANCE | 1 | |
| 1778051 | BALANCING FIXTURE | 1 | |
| 1778306 | BALANCING FIXTURE | 1 | |
| 18C1531 | FIXTURE, TORQUE - NO. 3 BALL BRG OUTER RACE LOCKNUT | 1 | |
| 1C6296 | FIXTURE, WELD AFT PRESSURE BAL | 1 | |
| 1C6296G01 | FIXTURE, WELD AFT PRESSURE BAL | 1 | |
| 1P16007 | Fixture, Balance | 1 | |
| 23002210 | BALANCING DRILL FIXTURE | 2 | |
| 23034394 | FIXTURE--RETAINING, COMPRESSOR ROTOR BALANCE USED | 1 | |
| 23063510 | Fixture – Balance, Compressor Wheel Assembly | 1 | |
| 247C5147 | FIXTURE, ADJUSTMENT - TRIM BALANCE WEIGHTS | 1 | |
| 2C18012G02 | FIXTURE FAN BALDE R/I CF680E1 | 6 | |
| 2C6356 | FIXTURE, INSTALL - NO.4 BALL BEARING | 1 | |
| 3-506-01 | SPRING TEST AND BALANCE FIXTURE | 1 | |
| 3-506-02 | BALANCE FIXTURE | 1 | |
| 3170035-1 | AILERON, RUDDER TRIM TAB BALANCE FIXTURE | 1 | |
| 3170036-1 | BALANCE FIXTURE | 3 | |
| 330A93-3412-00 | TOOL, BALL BEARING CAGE FIXTURE | 1 | |
| 330A93341200 | TOOL,BALL BEARING CAGE FIXTURE | 1 | |
| 3712023-1 | BALANCE CRADLE ASSEMBLY FIXTURE | 1 | |
| 3791092-1 | FIXTURE BALLSCREW.TORQUING | 1 | |
| 4066413-901 | SENSOR - TEST FIXTURE WEIGHT AND BALANCE. | 1 | |
| 5180002-1 | FIXTURE-CONTROL SURFACE BAL. | 3 | |
| 570-2336-02 | GIMBAL SPHERE ALIGNMENT FIXTURE | 1 | |
| 570-2354-01 | SPHERE BALANCE FIXTURE | 1 | |
| 570-7408-01 | GIMBAL LOCKING FIXTURE | 1 | |
| 5916761-3 | Detail Balance Fixture | 1 | |
| 5916761-501 | BALANCING FIXTURES | 1 | |
| 5916761-507 | Fixture Assy - Balance | 1 | |
| 6798257 | FIXTURE- CRADLE, PWR TURBINE ROTOR ASSY BAL. | 1 | |
| 6798259 | FIXTURE - CRADLE, GAS PRODUCER TURB ROTOR ASSY BAL | 1 | |
| 68936-062-1 | BALANCING FIXTURE FOR ROCKING SHAFT | 1 | |
| 6898299 | FIXTURE--BALANCE, POWER TURBINE ROTOR BALANCES POWER TURBINE ROTOR | 1 | |
| 6898400 | FIXTURE--BALANCE, GAS PRODUCER TURBINE BALANCES THE GAS PRODUCER TURBINE | 1 | |
| 6P1005521000CKF | FIXTURE, BALANCING, ELEVATOR | 2 | |
| 833581-1 | GIMBAL ALIGNMENT FIXTURE | 1 | |
| 834427-1 | BALANCING FIXTURE | 1 | |
| 834640-1 | BALLSCREW PRESS FIXTURE | 1 | |
| 856A1160G03 | Balance Fixture | 1 | |
| 856A1161G01 | Balance Fixture | 1 | |
| 856A1173 | FIXTURE, LIFT - BALANCE ARBORS | 1 | |
| 856A1173G02 | Fixture, Lift - Balance Arbors (lift fixture) | 5 | |
| 856A1173P03 | FIXTURE - LIFT BALANCE ARBORS | 1 | |
| 856A1176 | FIXTURE, LIFT - HPC/HPTR AND BALANCE ARBOR - HORIZONTAL | 1 | |
| 856A1176G02 | Fixture, Lift - HPC/HPT Rotor and Balance Arbor - Horizontal (lift fixture) | 5 | |
| 856A1234G01 | Balance Fixture | 1 | |
| 856A1886G01 | FIXTURE, LIFT - BALANCE ARBORS | 1 | |
| 856A1896 | FIXTURE LIFT-BALANCE ARBORS | 1 | |
| 856A1896G01 | FIXTURE, LIFT-BALANCE ARBORS | 1 | |
| 856A2001G04 | FIXTURE, LIFT-BALANCE ARBORS | 2 | |
| 856A2762G02 | Fixture - Balance Baseplate (balance baseplate) | 1 | |
| 856A2783G01 | FIXTURE, SYSTEM BALANCING, BOOSTER | 1 | |
| 856A2783G02 | FIXTURE, SYSTEM BALANCING, BOOSTER | 1 | |
| 856A2784G02 | DOLLY - BOOSTER AND BALANCE FIXTURE ASSY | 3 | |
| 856A2798 | LOCKING FIXTURE AND SOCKET - AGB 31/71-TOOTH GEARSHAFT BALL BEARING NUT LOCKING (FIXTURE AND SOCKET) | 1 | |
| 856A2798G01 | LOCKING FIXTURE AND SOCKET- AGB 31/71-TOOTH GEARSHAFT BALL BEARING NUT | 5 | |
| 856A3314G01 | FIXTURE-BALANCE BOOSTER | 1 | |
| 856A3450G01 | Balancing Fixture | 1 | |
| 856A3450G02 | FIXTURE, BALANCE - LPT ROTOR/STATOR ASSY | 3 | |
| 856A3451G01 | FIXTURE, BALANCE - LPT MAJOR MODULE | 1 | |
| 856A3451G02 | FIXTURE, BALANCE - LPT MAJOR MODULE | 1 | |
| 856A3451G03 | FIXTURE-BALANCE-LPT MAJOR MODULE | 1 | |
| 856A3467G01 | BALANCING FIXTURE | 1 | |
| 856A3467G02 | FIXTURE, BALANCING - LPT MAJOR MODULE | 1 | |
| 856A3487G02 | FIXTURE # BALL BEAR.4 THE TOOL IS USED TO PROTECT THE NO. 4 BALL BEARING | 4 | |
| 856A5513G05 | GRINDING/CHECKING FIXTURE - CONCAVE SIDE LPT BALDES STG1 | 2 | |
| 856A5513G06 | GRINDING/CHECKING FIXTURE - CONCAVE SIDE LPT BALDES STG1 | 3 | |
| 8C2195 | FIXTURE - REMOVE - HPC ROTOR AFT GRIND / BALANCE ARBOR (PRODUCTION) | 1 | |
| 8C2916 | FIXTURE - LIFT - BALLS & CAGE - NO 2 BRG | 1 | |
| 8C4119 | FIXTURE - BALANCING - BOOSTER ASSY | 1 | |
| 928A693-1 | BALANCING FIXTURE | 1 | |
| 956A1092 | FIXTURE - LIFT - BALANCE ARBORS | 1 | |
| 956A1526 | FIXTURE - LOADING BALL BEARINGS LEAP 1A/1C | 1 | |
| 956A6343 | FIXTURE - BALANCING - LPT ROTOR STATOR ASSY | 1 | |
| 956A6358 | FIXTURE - GAUGE RING BALANCING - LPT | 1 | |
| 956A6878 | FIXTURE - BALANCING - LOW PRESSURE COMPRESSOR | 1 | |
| 956A8305 | FIXTURE - BALANCING BARREL - LPT ASSY | 1 | |
| 956A8311 | FIXTURE - BALANCING ADJUST - LPT STATOR ASSY | 1 | |
| 956A8435 | FIXTURE - BALANCE BASEPLATE LPT BLADED DISK | 1 | |
| 956A8635 | FIXTURE - INSTALL - LPT BALANCING CLIP | 1 | |
| 956A8635G01 | FIXTURE - INSTALLATION, LPT BALANCING CLIP | 1 | |
| 956A8635G02 | FIXTURE - INSTALLATION, LPT BALANCING CLIP | 1 | |
| 956A8869 | FIXTURE - BALANCING - LOW PRESSURE COMPRESSOR | 1 | |
| 98A27207561000 | FIXTURE RUDDER VERTICAL STABALIZER | 3 | |
| 98D07103001000 | FIXTURE STRUT THSA/ GLOBAL JACKING SA | 6 | |
| 98D27403003000 | CHECKING TOOL-BALL SCREW AND TIE BAR FIXTURE STRUT THSA | 13 | |
| 98D27403003102 | CLEVIS ASSY (UPPPER FITTING) BALL LOCK PINFIXTURE STRUT THSA | 1 | |
| A52017-1 | TEST FIXTURE - GEARBOX, OVERHEAD PASSENGER DOOR COUNTERBALANCE | 1 | |
| AB27001-Y2I | CLEVIS ASSY (UPPPER FITTING) BALL LOCK PINFIXTURE STRUT THSA | 1 | |
| AGE10668 | ROTOR BALANCE FLUSH FIXTURE | 2 | |
| AGE11698 | ROTOR BALANCE FLUSH FIXTURE | 2 | |
| AGE11716 | BALANCE FIXTURE | 2 | |
| AGE12846 | BALANCING FIXTURE ARMATURE | 1 | |
| AGE13595 | BALANCE FIXTURE | 1 | |
| AGE13728-01 | ROTOR BALANCE ASSEMBLY FIXTURE | 1 | |
| AGE13728-02 | ROTOR BALANCE ASSEMBLY FIXTURE | 1 | |
| AGE13728-1 | FIXTURE-ROTOR BALANCE ASSEMBLY | 2 | |
| AGE13728-1,-2,-3,-4 | Rotor Balance Assembly Fixture | 1 | |
| AGE13728-2 | FIXTURE-ROTOR BALANCE ASSEMBLY | 2 | |
| AGE13728-3 | FIXTURE-ROTOR BALANCE ASSEMBLY | 2 | |
| AGE13728-4 | FIXTURE-ROTOR BALANCE ASSEMBLY | 2 | |
| AGE14799 | FIXTURE, BALANCE | 1 | |
| AGE15634 | Rotor Balance Assembly Fixture Head Support (Schenck) | 1 | |
| AGE15874 | BALANCE FIXTURE | 1 | |
| AGE16270 | FIXTURE, BALANCE | 1 | |
| BL52544 | BALL JOINT FITTING FIXTURE | 1 | |
| CF65B80562 | CHECKING FIXTURE - BALL SCREW, DRIVE MECHANISM, STABILIZER TRIM | 1 | |
| CF65B81117 | CHECKING FIXTURE EQPT-BALL NUT,TE FLAP DRIVE | 1 | |
| DZZ7179 | FIXTURE-CONTROL SURFACE BALANCE | 1 | |
| DZZ7179 REV B | FIXTURE-CONTROL SURFACE BALANCE | 1 | |
| DZZ7179-1 | FIXTURE, CONTROL SURFACE BALANCE BALANCE DETERMINATION OF UPPER FORWARD RUDDER (NMC6017-I,-505, -511) | 1 | |
| DZZ7179-501 | CONTROL SURFACE BALANCE FIXTURE | 1 | |
| DZZ7179-503 | FIXTURE, BAL CTRL SF | 1 | |
| DZZ7179-507 | CONTROL SURFACE BALANCE FIXTURE | 1 | |
| EMB-00466-001 | Tire Balance Patch Application Fixture | 1 | |
| F-1704 | Fixture, Ball Setter | 1 | |
| F70330-3 | CONTROL SURFACE BALANCE FIXTURE | 10 | |
| FES-25131 | Balance Cradle Fixture | 1 | |
| FES-30120 | Balance Cradle Fixture | 1 | |
| FES-33380 | Balance Cradle Fixture | 1 | |
| FES25131 | BALANCE CRABLE FIXTURE | 1 | |
| FES30120 | BALANCE CRADLE FIXTURE | 1 | |
| FES33380 | BALANCE CRADLE FIXTURE | 1 | |
| FES33924 | BALANCING FIXTURE | 1 | |
| G1002731001-001 | AILERON ELEVATOR BALANCING FIXTURE | 2 | |
| G27067 | CHECKING FIXTURE EQPT-BALL NUT,TE FLAP DRIVE | 1 | |
| G27067-1 | CHECKING FIXTURE EQUIPMENT - BALL NUT, TRAILING EDGE FLAP DRIVE | 5 | |
| G27067-2 | CHECKING FIXTURE EQUIPMENT - BALL NUT, TRAILING EDGE FLAP DRIVE | 3 | |
| G27067-80 | CHECKING FIXTURE EQUIPMENT - BALL NUT, TRAILING EDGE FLAP DRIVE | 5 | |
| G27067-81 | CHECKING FIXTURE EQUIPMENT - BALL NUT, TRAILING EDGE FLAP DRIVE | 5 | |
| GS | BALANCING FIXTURE | 1 | |
| GS 23440-1 | BALANCE FIXTURE PLATE | 11 | |
| GS10888 | FIXTURE BALL SEAT & GA | 1 | |
| GS13196-1 | FIXTURE BALANCING | 2 | |
| GS13196-4 | FIXTURE BALANCING | 2 | |
| GS13203-1 | ROTOR BALANCING FIXTURE | 1 | |
| GS13490 | FIXTURE BALL RETAINER LEVER | 1 | |
| GS14069-3 | FIXTURE BALANCI | 1 | |
| GS14070 | BAL FIXTURE | 1 | |
| GS14070-8 | FIXTURE, BALANCI | 1 | |
| GS14549-1 | FIXTURE BALANCING | 2 | |
| GS14549-3 | FIXTURE BALANCING | 2 | |
| GS14773-1 | BALANCE FIXTURE | 1 | |
| GS15164-1 | BALANCE FIXTURE ROTOR | 2 | |
| GS15164-3 | BALANCE FIXTURE ROTOR | 2 | |
| GS15548-1 | BALANCE FIXTURE | 1 | |
| GS15555-1 | FIXTURE BALANCE | 1 | |
| GS15626-1 | FIXTURE BALANCE | 1 | |
| GS15796-1 | FIXTURE, BALANCE | 1 | |
| GS15797-1 | FIXTURE, BALANCE | 1 | |
| GS15798-1 | FIXTURE, BALANCE | 1 | |
| GS16022-1 | FIXTURE, HOLDING FL YBALL GOVERNOR | 1 | |
| GS20053-1 | FIXTURE, BALANCING | 2 | |
| GS20063-1 | FIXTURE, BALANCING | 2 | |
| GS20080-1 | ROTOR BALANCING FIXTURE | 2 | |
| GS20439-1 | FIXTURE BLADE, BALANCING | 2 | |
| GS20439-1 (14RF-21) | FIXTURE BALANCING | 1 | |
| GS20439-2 | FIXTURE BLADE, BALANCING | 1 | |
| GS20439-2 (14RF-9) | FIXTURE BALANCING | 1 | |
| GS20439-5 | FIXTURE BALANCING | 1 | |
| GS20968-1 | FIXTURE, BLADE BALANCING | 3 | |
| GS20986-1 | FIXTURE, BALANCE | 1 | |
| GS20987-1 | FIXTURE, BALANCE | 1 | |
| GS20987-3 | FIXTURE, BALANCE | 1 | |
| GS23440-1 | PLATE, BALANCE FIXTURE | 11 | |
| GS234401 | BALANCE FIXTURE PLATE | 11 | |
| GS23441-1 | BLADE BALANCING FIXTURE | 3 | |
| GS23441-2 | BALANCE FIXTURE | 1 | |
| GS24519-1 | BALANCE FIXTURE | 1 | |
| HC130H0179-000 | Fixture - back lash checking, flap ball screw jack | 3 | |
| HS-7575 | FIXTURE - BLADE BALANCING | 1 | |
| HS7575 | Fixture - Blade Balancing | 1 | |
| HS9688 | PROPELLER BALANCING FIXTURE | 1 | |
| HSP1285 | DOME BALANCING FIXTURE | 1 | |
| HSP4445 | FIXTURE FLY BALL REWOR | 1 | |
| HSP841 | BALANCING FIXTURE | 3 | |
| HU26602 | Balancing Fixture | 1 | |
| HU29014/1 | BALANCING FIXTURE | 1 | |
| HU35206 | (BALANCING FIXTURE) PIC1 | 1 | |
| IAE1J12532 | FIXTURE, BALANCE | 1 | |
| IAE1J13207 | IAE 1J13207 BALANCE COVER AND FIXTURE | 1 | |
| IAE1M14022 | DISK FIXTURE, BALANCING | 1 | |
| IAE1M14023 | DISK FIXTURE, BALANCING | 1 | |
| IAE1M14024 | DISK FIXTURE, BALANCING | 1 | |
| IAE1M14025 | DISK FIXTURE, BALANCING | 1 | |
| IAE1M14026 | SLEEVE FIXTURE, BALANCING | 1 | |
| IAE1M14027 | FIXTURE, BALANCING | 1 | |
| IAE1M14150 | FIXTURE, BALANCING | 1 | |
| IAE1P16006 | FIXTURE, BALANCE | 1 | |
| JW0890097 | BALANCE LPT - LIFT FIXTURE | 1 | |
| PWA 25519 | BALANCE FIXTURE | 1 | |
| PWA 25520 | HPC BALANCE FIXTURE | 1 | |
| PWA 27700 | HPC REAR BALANCE FIXTURE | 2 | |
| PWA 32535 | Balance fixture | 2 | |
| PWA 75126 | BALANCE FIXTURE | 2 | |
| PWA109641 | FIXTURE, INSTALL, TRIM BALANCE WEIGHT | 1 | |
| PWA26513 | FIXTURE,BALANCE - HPT FRONT_[PWA26513] | 2 | |
| PWA27700 | FIXTURE, BAL - REAR COMP R & STATOR_[PWA27700] | 2 | |
| PWA27705 | FIXTURE,BALANCE - HPC ROTOR & STATOR_[PWA27705] | 1 | |
| PWA27846 | BALANCE FIXTURE_[PWA27846] | 1 | |
| PWA29474 | FIXTURE,BALANCE_[PWA29474] | 1 | |
| PWA32535 | BALANCE FIXTURE, JT8D | 2 | |
| PWA45117 | REAR BALANCE FIXTURE | 1 | |
| PWA45189 | REAR BALANCE FIXTURE | 1 | |
| PWA45360 | FRONT BALANCE FIXTURE | 1 | |
| PWA45413 | FRONT BALANCE FIXTURE | 1 | |
| PWA75126 | FIXTURE, BALANCE_[PWA75126] | 2 | |
| PWA85766A | FIXTURE,BALANCE_1473X1473X158/189KG_[PWA85766A] | 1 | |
| PWC 34650-200 | PT-67A BALANCE FIXTURE | 3 | |
| PWC30411 | Fixture-Balancing Comp. | 4 | |
| PWC32050 | FIXTURE BALANCING | 1 | |
| PWC32051 | FIXTURE BALANCE | 4 | |
| PWC32150 | FIXTURE -BALANCING | 3 | |
| PWC34450 | Balancing fixture | 2 | |
| PWC34546 | BALANCING FIXTURE | 1 | |
| PWC34650-200 | Fixture Balance | 3 | |
| PWC37950 | Fixture Balance | 1 | |
| PWC38160 | FIXTURE, LPT ROTOR, BALANCING | 1 | |
| PWC50240 | FIXTURE - BALANCING, CARRIER | 3 | |
| PWC51017 | SUPPORT FIXTURE, ROTOR BALANCE | 1 | |
| PWC55241 | FIXTURE - BALANCING | 1 | |
| PWC55365 | BALANC FIXTURE | 1 | |
| PWC59064 | FIXTURE - BALANCING | 1 | |
| PWC60449 | LIFTING FIXTURE (FAN BALANCING ASSEMBLY) | 2 | |
| PWC66366 | FIXTURE - BALANCING | 2 | |
| PWC77143 | ALIGNMENT FIXTURE ROTOR BALL | 1 | |
| RB23002210 | Compressor Rotor Balance Correction Fixture | 2 | |
| RB23034394 | Fixture-Retaining Compressor Rotor Balance | 1 | |
| RB6898400 | Gas Producer Turbine Balance Fixture | 2 | |
| RBE330A93-3412-00 | Tool, Ball Bearing Cage Fixture | 2 | |
| RWT45-0021-00 | FIXTURE - LIFTING (GLOBAL EAGLE ENTERTAINMENT KU BAND ANTENNA) | 1 | |
| T-00906-1 | BALANCE FIXTURE | 1 | |
| T01551432 | BALANCE FIXTURE | 1 | |
| T119295 | GIMBAL HOLDING FIXTURE | 1 | |
| T26-12 | BALL LAPPING FIXTURE | 1 | |
| T4051723 | BALANCE & RUN-IN FIXTURE | 1 | |
| T4051723-1 | BALANCE & RUN-IN FIXTURE | 1 | |
| T723401451 | FIXTURE,TO LIFT & INTALL HPC BALANCING DRIVER | 1 | |
| TAF00463 | BALL BEARING ASSEMBLY FIXTURE | 1 | |
| TAF00550 | BALL BEARING ASSEMBLY FIXTURE | 1 | |
| TB3082G0XX | BALANCE FIXTURE | 1 | |
| TB3090G001 | T2 BALANCING FIXTURE | 1 | |
| TB3094G001 | IMPELLER BALANCING FIXTURE | 1 | |
| TMA2284 | BALLSCREW AXIAL PLAY/HOUSING FIXTURE | 1 | |
| V8BAIR | BALANCE FIXTURE | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
