| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 6796937 | FIXTURE - CHECK | 2 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) GS25565-1 | TEST FIXTURE ASSY, LOW-STAGE BLEED CHECK-VALVE (CALIBRATION) | 1 | |
| 10C1155 | FIXTURE, SEATING CHECK - CORE | 1 | |
| 10C1155G02 | FIXTURE, SEATING CHECK - CORE MODULE TO INLET GEAR BOX (SEATING CHECK FIXTURE) (RECOMMENDED) | 1 | |
| 114-263 | FIXTURE-FOR CHECK OF THE OVERINFLATION PLUGS FOR LEAKS | 5 | |
| 114-263 PM | FIXTURE-FOR CHECK OF THE OVERINFLATION PLUGS FOR LEAKS | 1 | |
| 114-263PM | FIXTURE-FOR CHECK OF THE OVERINFLATION PLUGS FOR LEAKS | 1 | |
| 11C3094 | FIXTURE - SEATING - CHECK-NO 2 BEARING | 1 | |
| 11C3094G02 | FIXTURE, SEATING, CHECK - NO. 2 BEARING | 1 | |
| 11C3454 | FIXTURE - FLOW CHECK-NO 5 LPT BEARING DAMPER | 1 | |
| 11C3454G02 | FIXTURE, FLOW CHECK - NO. 3 BEARING DAMPERS, FHF | 1 | |
| 11C3596 | FIXTURE - PLUG - NO. 5 BEARING OIL FLOW (FLOW CHECK FIXTURE) | 1 | |
| 18C1174 | FIXTURE, RUNOUT - KINK CHECK | 1 | |
| 18C1341 | FIXTURE, KINK CHECK - HORIZONTAL | 1 | |
| 18C1552 | FIXTURE, FLOW CHECK - OIL | 1 | |
| 1C6065 | FIXTURE, CONCENTRICITY CHECK-LOW PRESS TURBINE RTR | 1 | |
| 1C6065 REV J | FIXTURE, CONCENTRICITY CHECK-LOW PRESS. TURBINE ROTOR | 1 | |
| 1C6895 | FIXTURE,DROP CHECK-COMPRESS | 1 | |
| 1C6895G01 | FIXTURE,DROP CHECK-COMPRESS | 1 | |
| 1C6909 | FIXTURE, DROP CHECK - PT ROTOR, AFT | 1 | |
| 1C6909G01 | FIXTURE, DROP CHECK - PT ROTOR, AFT | 1 | |
| 1C6996 | FIXTURE - CHECK ACTUATOR | 1 | |
| 1C9311G02 | FIXTURE, SEAT CHECK - COUPLING NUT, SHAFT,LPT ROTOR | 1 | |
| 1C9403G01 | Fixture- Check Actuators VSV/VIGV | 1 | |
| 1C9616 | FIXTURE - SEAT CHECK-COUPLING NUT | 1 | |
| 1C9616G01 | Fixture, Seat Check - Coupling Nut, Shaft | 1 | |
| 21C7113G02 | SPECIAL TOOL - FIXTURE, FLOW CHECK, NOZZLE | 1 | |
| 23033028 | FIXTURE----CHECKING, COMPRESSOR ROTOR TIE BOLT STRETCH | 1 | |
| 23033040 | ADAPTER--PRESSURE CHECK FIXTURE, | 1 | |
| 2C14094 | FIXTURE, SEATCHECK-NO. 4B BEARING & SEAL | 1 | |
| 2C14094 REV Y | FIXTURE, SEATCHECK-NO. 4B BEARING & SEAL | 1 | |
| 2C14094G06 | FIXTURE, SEAT CHECK - NO. 4B BEARING AND SEAL | 1 | |
| 2C14131 | FIXTURE - SEATING CHECK | 1 | |
| 2C14131G01 | FIXTURE, SEATING CHECK - HPTR (WITH FAN AND MID SHAFT OUT - VERTICAL) | 1 | |
| 2C14131G02 | FIXTURE, SEATING CHECK- HPT ROTOR | 4 | |
| 2C4094 | FIXTURE, SEATCHECK- NO 4B BEARING AND SEAL | 1 | |
| 2C5186P01 | FIXTURE- HPT ROTOR SEATING CHECK | 1 | |
| 2C5937G01 | FIXTURE - BUBBLE CHECK LUBE | 1 | |
| 2C6934G04-AF | FIXTURE,LEAK CHECK-A SUMP, FAN FRAME | 1 | |
| 2C7376G01/G03TK | Stg.1 & 2 HPT Blade Water Flow Check Fixture (CF6-80A3 / C2) | 1 | |
| 2C81145G01 | PRESSURE CHECK B-SUMP FIXTURE | 1 | |
| 2C81622 | FIXTURE - TARGET CHECK - PTO OI | 1 | |
| 2C81622G01 | FIXTURE - TARGET CHECK - PTO OI | 1 | |
| 2C91213G01 | FIXTURE-CHECKING SHIM BACKLASH | 1 | |
| 30R0327G01 | SPECIAL TOOL - FIXTURE, LEAK CHECK SWIRL FRAME ANTI-ICING | 1 | |
| 3CF65B80552 | CHECK FIXTURE - STABILIZER JACKSCREW DIFFERENTIAL ASSEMBLY, BACKLASH | 1 | |
| 400-8337 | CHECKING FIXTURE, END-PLAY | 1 | |
| 45-135030-9/810 | TRIM TAB FREEPLAY,CHECK FIXTURE (APKAD-270-1) | 2 | |
| 5916784-1 | Fixture Assy - Static Port Contour Check | 4 | |
| 5916803-1 | Fixture-MLG Damper Check | 8 | |
| 6796446 | Check Fixture- Propeller Control Linkage | 1 | |
| 6796708 | FIXTURE - CHECK, PROPELLER CONTROL LINKAGE | 3 | |
| 6796711 | FIXTURE - CHECKING, TURBINE VANE LOCKING KEY | 2 | |
| 6796712 | FIXTURE - CHECKING, STOCK | 2 | |
| 6796889 | FIXTURE - CHECKING | 1 | |
| 6796937 | FIXTURE - CHECK, PINION GEAR BUSHING CONCENTRICITY | 2 | |
| 6797590 | FIXTURE - CHECKING, EXTENSION SHAFT AND SIDE GEAR BACKLASH | 2 | |
| 6798227 | FIXTURE - CHECKING, COMPRESSOR VANE ASSEMBLY AXIAL LOCATION | 1 | |
| 6798232 | FIXTURE - FUNCTIONAL CHECK, ANTI - ICING ASSY | 2 | |
| 6798787 | FIXTURE-COMPRESSOR DISCHARGE AIR TUBE ASSEMBLY PRESSURE CHECK | 1 | |
| 6872178 | FIXTURE - FLOW CHECK AND TARGET | 1 | |
| 6872180 | FIXTURE - FLOW CHECK | 1 | |
| 6872283 | FIXTURE - CHECKING | 1 | |
| 6872475 | FIXTURE - CHECKING | 1 | |
| 6872532 | FIXTURE - CHECKING | 1 | |
| 6872804 | FIXTURE - PRESSURE CHECK | 1 | |
| 6872880 | FIXTURE----CHECKING, COMPRESSOR MOUNTING INSERTS (GEARBOX) | 1 | |
| 6873066 | FIXTURE----CHECKING, COMPRESSOR AXIS | 1 | |
| 6887819 | FIXTURE----CHECKING, GAS PRODUCER AND POWER TURBINE SUPPORTS BEARING BORES | 2 | |
| 6893363 | FIXTURE - PRESSURE CHECK | 1 | |
| 734-60988 | PILOT CHECK VALVE TEST FIXTURE (EQUIVALENT TO 737-11191) | 1 | |
| 734-60990 | CHECK VALVE TEST FIXTURE (EQUIVALENT TO 737-11193) | 1 | |
| 856A1053 | FIXTURE, IMPINGMENT CHECK - LUBE JET | 1 | |
| 856A1053P01 | Fixture, Impingement Check - Lube Jet (impingement check fixture) | 4 | |
| 856A1053P03 | FIXTURE, IMPINGEMENT CHECK - LUBE JET (IMPINGEMENT CHECK FIXTURE) | 1 | |
| 856A2380 | FIXTURE, CHECKING-CENTER VENT TUBE INNER SUPPORTS | 1 | |
| 856A2380G02 | Fixture, Checking - Center Vent Tube Inner Support (checking fixture) | 4 | |
| 856A2416 | CHECKING FIXTURE - INTMD FLANGE | 1 | |
| 856A2667 | AD2 RUNOUT CHECKING FIXTURE - FAN MAJOR | 1 | |
| 856A2667G01 | AD2 RUNOUT CHECKING FIXTURE - FAN MAJOR | 1 | |
| 856A2667G02 | AD2 RUNOUT CHECKING FIXTURE - FAN MAJOR | 1 | |
| 856A2667G03 | AD2 RUNOUT CHECKING FIXTURE - FAN MAJOR | 1 | |
| 856A2667G04 | AD2 RUNOUT CHECKING FIXTURE - FAN MAJOR | 8 | |
| 856A2667G05 | AD2 RUNOUT CHECKING FIXTURE - FAN | 1 | |
| 856A2667G06 | AD2 RUNOUT CHECKING FIXTURE - FAN MAJOR | 7 | |
| 856A2748G03 | CHECKING FIXTURE - BACKLASH | 4 | |
| 856A2924G01 | DIM V CHECKING FIXTURE - N1/2 BRG | 4 | |
| 856A3460G01 | FIXTURE, CHECKING - CENTER VENT TUBE INNER SUPP. | 1 | |
| 856A3460G02 | FIXTURE, CHECKING - CENTER VENT TUBE INNER SUPP. | 1 | |
| 856A3460G03 | FIXTURE, CHECKING - CENTER VENT TUBE INNER SUPP. | 1 | |
| 856A3460G04 | FIXTURE, CHECKING - CENTER VENT TUBE INNER SUPP. | 1 | |
| 856A3460G05 | FIXTURE, CHECKING - CENTER VENT TUBE INNER SUPP. | 1 | |
| 856A3460G06 | FIXTURE, CHECKING - CENTER VENT TUBE INNER SUPPORTS | 6 | |
| 856A3460G06 | FIXTURE, CHECKING - CENTER VENT TUBE INNER SUPP. | 6 | |
| 856A3472G01 | AXIAL CHECKING FIXTURE - CVT | 10 | |
| 856A3474G01 | EXPANSION LOAD CHECKING FIXTURE - | 7 | |
| 856A3546 | Fixture, Checking Backlash - TGB Bevel Gear | 1 | |
| 856A3546G01 | FIXTURE, CHECKING. BACKLASH - TGB BEVEL GEAR DUO | 1 | |
| 856A3546G02 | FIXTURE, CHECKING. BACKLASH - TGB BEVEL GEAR DUO | 1 | |
| 856A3546G03 | FIXTURE, CHECKING. BACKLASH - TGB BEVEL GEAR DUO | 1 | |
| 856A3546G04 | FIXTURE, CHECKING. BACKLASH - TGB BEVEL GEAR DUO | 1 | |
| 856A3546G05 | FIXTURE, CHECKING. BACKLASH - TGB BEVEL GEAR DUO | 1 | |
| 856A3546G06 | FIXTURE, CHECKING. BACKLASH - TGB BEVEL GEAR DUO | 4 | |
| 856A3546G07 | FIXTURE, CHECKING. BACKLASH - TGB BEVEL GEAR DUO | 1 | |
| 856A3610G01 | FIXTURE, CHECKING, DIM “V” - NO. 1 AND 2 BRG SUPPORT | 4 | |
| 856A3783G02 | FIXTURE - CHECKING D | 6 | |
| 856A3913 | FIXTURE, CHECKING - ASSEMBLY/TRF WITH NO. 5 BEARING SUPPORT (CHECKING FIXTURE) | 1 | |
| 856A3913G01 | Fixture, Checking - Assembly/TRF with No. 5 Bearing Support | 2 | |
| 856A3913G03 | Fixture, Checking - Assembly/TRF with No. 5 Bearing Support (checking fixture) | 6 | |
| 856A4604G01 | FIXTURE, CHECKING - LPT STAGE 1 BLADE NOT ESSENTIAL TO START | 1 | |
| 856A4604G02 | FIXTURE, CHECKING - LPT STAGE 1 BLADE | 1 | |
| 856A4605G01 | FIXTURE, CHECKING - LPT STAGE 2 BLADE | 2 | |
| 856A4606G01 | FIXTURE, CHECKING - LPT STAGE 3 BLADE | 2 | |
| 856A4611G02 | FIXTURE, CHECKING - FAN BLADE | 1 | |
| 856A4615G04 | AIRFLOW CHECKING FIXTURE - LPT | 1 | |
| 856A5507G04 | CHECKING FIXTURE - LPT BLADES STG 3 | 2 | |
| 856A5507G05 | CHECKING FIXTURE - LPT BLADES STG 3 | 1 | |
| 856A5513G05 | GRINDING/CHECKING FIXTURE - | 2 | |
| 856A5513G06 | GRINDING/CHECKING FIXTURE - CONCAVE SIDE LPT BALDES STG1 | 3 | |
| 856A5556G01 | STAGE 1-4 LPT BLADE TWIST ANGLE CHECK (CONF.2 AND 3) (HOLDING FIXTURE) | 1 | |
| 856A5556G02 | FIXTURE HOLDING TWIST ANGLE CHECK LPT BLADES STAGE 1-4 | 3 | |
| 856A5562G02 | FIXTURE BUCKLING CHECK-LPT STG 1-4 | 3 | |
| 856A5574G01 | CHECKING FIXTURE - FAN BLADE | 1 | |
| 856A5621G01 | CHECKING FIXTURE - FAN BLADE | 1 | |
| 856A5749G01 | CHECKING FIXTURE - LPT NOZZLE STG 2 | 1 | |
| 856A5749G02 | CHECKING FIXTURE - LPT NOZZLE STG 2 | 1 | |
| 856A5750G01 | CHECKING FIXTURE - LPT NOZZLE STG 3 | 1 | |
| 856A5750G02 | CHECKING FIXTURE - LPT NOZZLE STG 3 | 1 | |
| 856A5751G01 | CHECKING FIXTURE - LPT NOZZLE STG 4 | 1 | |
| 856A5752G01 | CHECKING FIXTURE - LPT NOZZLE STG 5 | 1 | |
| 856A5802G01 | SEGMENT CHECKING FIXTURE - LPT | 1 | |
| 856A5803G01 | AIRFLOW CHECKING FIXTURE - LPT NOZZLE STG1 | 1 | |
| 856A5904G01 | DIM INSP CHECKING FIXTURE - LPT | 1 | |
| 856A5905G01 | FIXTURE, CHECKING - LPT STAGE 2 BLADE (CHECKING FIXTURE) NOT ESSENTIAL TO START | 1 | |
| 856A5905G02 | DIM INSP CHECKING FIXTURE - LPT BLADE STG 2 | 1 | |
| 856A5905G03 | DIM INSP CHECKING FIXTURE - LPT | 1 | |
| 856A5906G01 | DIM INSP CHECKING FIXTURE - LPT BLADE STG 3 | 1 | |
| 856A5907G01 | DIM INSP CHECKING FIXTURE - LPT | 1 | |
| 856A5911G01 | CHECKING FIXTURE - FAN BLADE | 1 | |
| 856A6617 | FIXTURE, CHECKING - 25 DEG. & 37 DEG. ANGLED MIDSPAN SHROU | 1 | |
| 856A6617 REV D | FIXTURE, CHECKING - 25 DEG. & 37 DEG. ANGLED MIDSPAN SHROU | 1 | |
| 856A6705G01 | CHECKING FIXTURE - LPT BLADE STG 1 | 1 | |
| 856A6706G01 | CHECKING FIXTURE - LPT BLADE STG 2 | 1 | |
| 856A6707G01 | CHECKING FIXTURE - LPT BLADE STG 3 | 1 | |
| 856A6708G01 | CHECKING FIXTURE - LPT BLADE STG 4 | 1 | |
| 8C2672 | FIXTURE, LEAK CHECK - DRAIN MAST | 1 | |
| 8C3158 | FIXTURE - CHECK - C-CLIP ASSY | 1 | |
| 956A1315 | FIXTURE - SEATING CHECK - CORE MODULE TO INLET GEAR BOX | 1 | |
| 956A1323 | FIXTURE - SETMASTER/TEST - DROP CHECK TOOL | 1 | |
| 956A3089 | FIXTURE - LEAKAGE CHECK - C SUMP | 1 | |
| 956A3323 | FIXTURE - CALIBRATION - DROP CHECK TOOL | 1 | |
| 956A3624 | FIXTURE - LEAK CHECK | 1 | |
| 956A3624G01 | SPL-20664 - FIXTURE - LEAK CHECK | 3 | |
| 956A6023 | FIXTURE - CLEARANCE CHECK - SENSOR N1 | 1 | |
| 956A6032 | FIXTURE - CHECK ALIGNMENT - NUT - FAN & BOOSTER | 1 | |
| 956A6034 | FIXTURE - CHECK - NIPPLE LOCATION - BEARING # 2 | 1 | |
| 956A6049 | FIXTURE -CHECK LOCATION-SYSTEM ANTI ICING -FAIRING FLOW PATH | 1 | |
| 956A6058 | FIXTURE - BACKLASH CHECK - ABRADABLE SEAL | 1 | |
| 956A6086 | FIXTURE - DIMENSION CHECK - FAN HUB | 1 | |
| 956A6161 | FIXTURE - INSTALL & CHECK - VBV DOOR | 1 | |
| 956A6460 | FIXTURE - DIMENSION CHECK - LPT | 1 | |
| 956A6545 | FIXTURE - CLEARANCE CHECK - LPT BLADES STAGE 7 | 1 | |
| 956A6617 | FIXTURE, FLOW CHECK - CARBON SEAL NO.5 BEARING | 1 | |
| 956A7006 | FIXTURE, CHECK - VARIABLE BLEED VALVE | 1 | |
| 956A8025 | FIXTURE - CHECK - NOZZLE - OIL BEARING 2 | 1 | |
| 956A8084 | FIXTURE - CHECK - ABRADABLE STRIP - RUN OUT | 1 | |
| 956A8149 | FIXTURE - CHECK - VARIABLE BLEED VALVE | 1 | |
| 956A8156 | FIXTURE - CHECK - IGV ASSEMBLY | 1 | |
| 956A8335 | FIXTURE - CHECK - LPT ZF DIMENSION | 1 | |
| 956A8476 | FIXTURE - CHECK - BACKLASH | 1 | |
| 956A8477 | FIXTURE - MASTER - ALIGNMENT/CHECK | 1 | |
| 98D27403003000 | CHECKING TOOL-BALL SCREW AND TIE BAR FIXTURE STRUT THSA | 13 | |
| 9C2397 | CHECKING FIXTURE-HPCR BLISK 1 | 1 | |
| 9C2397G03 | CHECKING FIXTURE - HPCR BLISK 1 | 1 | |
| 9C3184 | FIXTURE, LEAK CHECK - AGB CIRCUTS | 1 | |
| 9C3184G01 | FIXTURE - LEAK CHECK | 2 | |
| 9C3185 | FIXTURE- LEAK CHECK | 1 | |
| A22004-1 | Checking Fixture - Autothrottle Gearbox | 5 | |
| A27028-11 | CHECKING FIXTURE - LOAD LIMITER SPRING, AILERON CONTROL | 3 | |
| A27048-1 | FIXTURE - CHECK, GEARBOX BACKLASH | 1 | |
| A27048-2 | FIXTURE - CHECK, GEARBOX BACKLASH | 1 | |
| A27048-3 | FIXTURE - CHECK, GEARBOX BACKLASH | 1 | |
| A27048-40 | FIXTURE - CHECK, GEARBOX BACKLASH | 1 | |
| A27049-1 | CHECK FIXTURE - LEADING EDGE SLAT ANGLE GEARBOX BACKLASH | 1 | |
| A27127-1 | Checking Fixture -Input Rod Assembly. Elevator Pcu | 3 | |
| A27127-29 | CHECKING FIXTURE - INPUT ROD ASSEMBLY, ELEVATOR PCU | 8 | |
| A28004-1 | CHECK FIXTURE - SURGE TANK PRESSURE RELIEF VALVE | 4 | |
| A78010-1 | CHECK FIXTURE - SPRING INTERLOCK BELLCRANK, JT9D | 1 | |
| AR024G005 | FIXTURE-CHECKING | 1 | |
| B27031 | CHECKING FIXTURE -0 POGO ROD ASSY, ELEVATOR | 1 | |
| B27031-16 | CHECKING FIXTURE - ELEVATOR POGO ROD ASSEMBLY | 3 | |
| B56001-74 | CHECK FIXTURE - NO. 2 WINDOW | 1 | |
| CA21038K-100 | CHECKING FIXTURE - ELEVATOR POGO ROD ASSEMBLY | 1 | |
| CF65B40907 | CHECK FIXTURE - PRESSURE RELIEF VALVE ASSEMBLY, AIR CONDITIONING | 1 | |
| CF65B57391 | CHECKING FIXTURE - ESCAPE SLIDE/RAFT | 1 | |
| CF65B57652 | LINKAGE CHECK FIXTURE - UPPER DECK SLIDE | 1 | |
| CF65B61160 | CHECKING FIXTURE - CARGO BAGGAGE RETRACTABLE GUIDE RAIL INSTALLATION | 1 | |
| CF65B62206-9 | CHECKING FIXTURE - CAM FOLLOWER INSTALLATION | 1 | |
| CF65B80562 | CHECKING FIXTURE - BALL SCREW, DRIVE MECHANISM, STABILIZER TRIM | 1 | |
| CF65B80578 | CHECK FIXTURE - QUADRANT LEVER AND BRACKET ASSEMBLY, INBOARD SPOILER | 1 | |
| CF65B80836 | CHECK FIXTURE - SPOILER CONTROL, DIFFERENTIAL MECHANISM | 1 | |
| CF65B80934 | CHECK FIXTURE - OUTBOARD AILERON GEARBOX | 1 | |
| CF65B81117 | CHECKING FIXTURE EQPT-BALL NUT,TE FLAP DRIVE | 1 | |
| CF65B81126 | CHECK FIXTURE - OUTBOARD TRANSMISSION ASSEMBLY, OUTBOARD TRAILING EDGE FLAP DRIVE | 1 | |
| CF65B81127 | CHECK FIXTURE - INBOARD TRANSMISSION ASSEMBLY, OUTBOARD TRAILING EDGE FLAP DRIVE | 1 | |
| CF65B81128 | CHECK FIXTURE - OUTBOARD TRANSMISSION ASSEMBLY, INBOARD TRAILING EDGE FLAP DRIVE | 1 | |
| CF65B81129 | CHECKING FIXTURE - INBOARD TRANSMISSION ASSEMBLY, INBOARD TRAILING EDGE FLAP DRIVE | 1 | |
| CF65B82106 | SPRING CHECKING FIXTURE - LOAD LIMITER ASSEMBLY, AILERON CONTROL | 1 | |
| CF65B82986 | CHECK FIXTURE - BACKLASH CF65B82986 GEARBOX ASSEMBLY, INBOARD LEADING EDGE FLAP DRIVE | 1 | |
| CF65B83864 | CHECKING FIXTURE - ANGLE GEARBOX, TRAILING EDGE FLAP DRIVE | 1 | |
| CF65B94508 | CHECKING FIXTURE - BLEED DUCT, CF6-50 INTERFACE FLANGES | 1 | |
| CJMD127-002 | RUDDER CHECK FIXTURE - CESSNA | 1 | |
| CJMD8B27-001 | CHECK FIXTURE-RUDDER | 2 | |
| CJMDE27-001 | RUDDER AND RUDDER TRIM TAB CHECK FIXTURE 560-0539 THRU 5000 | 1 | |
| CJMDL247-002 | ELEVATOR AND ELEVATOR TRIM TAB CHECK FIXTURE 560-0539 THRU 5000 | 1 | |
| CJMDL27-002 | CHECK FIXTURE -- ELEVATOR -- LEFT | 2 | |
| CJMDL27-006 | CHECK FIXTURE -- ELEVATOR -- RIGHT | 2 | |
| CJMDL27-007 | CHECK FIXTURE -- RUDDER AND TRIM | 2 | |
| CJMDS27-001 | CHECK FIXTURE - RUDDER | 1 | |
| CJMDS27-002 | CHECK FIXTURE - LH ELEVATOR | 1 | |
| CJMDS27-003 | CHECK FIXTURE - RH ELEVATOR | 1 | |
| DRT67522 | FIXTURE-CHECKING | 1 | |
| DRT67706 | FIXTURE-CHECKING | 1 | |
| EAS/B/1206 | CHECK FIXTURE EQUIPMENT - PRESSURE RELIEF VALVE | 1 | |
| F71421 | FIXTURE - END PLAY CHECKING, STABILIZER TRIM ACTUATOR | 1 | |
| F71421-27 | FIXTURE - END PLAY CHECKING, STABILIZER TRIM ACTUATOR | 1 | |
| F71421-500 | Fixture - End Play Checking, Stabilizer Trim Actuator | 1 | |
| F71421-501 | Fixture - End Play Checking, Stabilizer Trim Actuator | 7 | |
| F72828 | ALIGNMENT FIXTURE -0 THRUST REVERSER TO CHECK | 1 | |
| G27067 | CHECKING FIXTURE EQPT-BALL NUT,TE FLAP DRIVE | 1 | |
| G27067-1 | CHECKING FIXTURE EQUIPMENT - BALL NUT, TRAILING EDGE FLAP DRIVE | 5 | |
| G27067-2 | CHECKING FIXTURE EQUIPMENT - BALL NUT, TRAILING EDGE FLAP DRIVE | 3 | |
| G27067-80 | CHECKING FIXTURE EQUIPMENT - BALL NUT, TRAILING EDGE FLAP DRIVE | 5 | |
| G27067-81 | CHECKING FIXTURE EQUIPMENT - BALL NUT, TRAILING EDGE FLAP DRIVE | 5 | |
| G28005 | CHECK FIXTURE EQUIPMENT-PRESSURE RELIEF VALVE | 1 | |
| G28005-14 | CHECK FIXTURE EQUIPMENT - PRESSURE RELIEF VALVE | 4 | |
| G28005-18 | CHECK FIXTURE EQUIPMENT - PRESSURE RELIEF VALVE | 2 | |
| G28005-23 | CHECK FIXTURE EQUIPMENT - PRESSURE RELIEF VALVE | 3 | |
| G28005-29 | CHECK FIXTURE EQUIPMENT - PRESSURE RELIEF VALVE | 5 | |
| G28005-35 | Check Fixture Equipment - Pressure Relief Valve | 17 | |
| G28005-4 | CHECK FIXTURE EQUIPMENT - PRESSURE RELIEF VALVE | 1 | |
| G28005-42 | Check Fixture Equipment - Pressure Relief Valve | 2 | |
| G28005-48 | CHECK FIXTURE EQUIPMENT - PRESSURE RELIEF VALVE | 3 | |
| G28031 | CHECK FIXTURE- REFUEL, VENT/TRANSFER, AUX FUEL | 1 | |
| G28031-1 | CHECK FIXTURE - REFUEL, VENT/TRANSFER, AUXILIARY FUEL SYSTEM | 1 | |
| G34002-5 | Check Fixture - Ang Of Attk Sens | 7 | |
| GS25565-1 | TEST FIXTURE ASSY, LOW-STAGE BLEED CHECK-VALVE | 7 | |
| GS25655-1 | TEST FIXTURE ASSY, LOW-STAGE BLEED CHECK-VALVE | 1 | |
| GSE499 | TEST FIXTURE ASSY, LOW-STAGE BLEED CHECK-VALVE | 1 | |
| HC130H0179-000 | Fixture - back lash checking, flap ball screw jack | 3 | |
| J27059-38 | CHECK FIXTURE EQUIPMENT - BACKLASH, LE SLAT ANGLE GEARBOXES | 1 | |
| LTCT13442 | FIXTURE, PRESSURE CHECK - TUBE ASSY | 1 | |
| PWA25871 | FIXTURE,CHECKING - BLADE,LPT 3RD NOTCH_[PWA25871] | 1 | |
| PWA25966 | FIXTURE - MGB NOZZLE CHECK_[PWA25966] | 2 | |
| PWA25969 | FIXTURE - MGB NOZZLE CHECK_[PWA25969] | 2 | |
| PWA27363 | FIXTURE - LPT 6TH BLADE NOTCH CHECK_[PWA27363] | 1 | |
| PWA28195 | FIXTURE-CHECK | 2 | |
| PWA29081 | FIXTURE,CHECKING - HPT 2ND AXIAL TILT VN_[PWA29081] | 1 | |
| PWA6320 | FIXTURE-CHECKING_[PWA6320] | 1 | |
| PWC72324 | FIXTURE-LEAK CHECK | 4 | |
| PWC72520 | ADAPTER-FLOW CHECK FIXTURE | 4 | |
| RB23033028 | Fixture-Checking-Compressor Rotor Tie Bolt Stretch | 1 | |
| RB6872880 | FIXTURE----CHECKING, COMPRESSOR MOUNTING INSERTS (GEARBOX) | 2 | |
| RB6873066 | FIXTURE----CHECKING, COMPRESSOR AXIS | 2 | |
| RB6887819 | FIXTURE----CHECKING, GAS PRODUCER AND POWER TURBINE SUPPORTS BEARING BORES | 1 | |
| SPL-8420 | PRESS RELIEF VALVE - CHECK FIXTURE | 1 | |
| TF65921 | TEST FIXTURE, ANTI-CAVITATION/INLET CHECK VALVE | 1 | |
| TF65921 | Test Fixture, Anti-Cavitation/Inlet Check Valve | 1 | |
| WSPL-39 | TEST FIXTURE ASSY, LOW-STAGE BLEED CHECK-VALVE | 1 | |
| lC6065 | FIXTURE, CONCENTRICITY CHECK-LOW PRESS. TURBINE ROTOR | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
