| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 2C81012 | FIXTURE, INSTALL | 1 | |
| 2C81012G01 | FIXTURE, INSTALL | 1 | |
| 856A1291 | FIXTURE, INSTALL | 1 | |
| 856A1291G10 | FIXTURE, INSTALL | 7 | |
| 956A8675G01 | FIXTURE, INSTALL | 2 | |
| 956A8675G02 | FIXTURE, INSTALL | 6 | |
| IAE1P16122 | FIXTURE, INSTALL | 1 | |
| IAE1P16124 | FIXTURE, INSTALL | 2 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) PWA111529 | FIXTURE, INSTALLATION (CALIBRATION) (CALIBRATION) | 1 | |
| 100-47823 | INSTALLATION FIXTURE, STATIONARY SEAL | 1 | |
| 10C1039P01 | FIXTURE, INSTALLATION - OUTER COOLING AIR DUCT | 1 | |
| 10C1040G01 | FIXTURE, INSTALLATION - OUTER COOLING AIR DUCT RETAINING | 1 | |
| 10C1058G01 | Fixture,Install And Remove-Bolts,Fwd Shafi | 1 | |
| 10C1063G03 | FIXTURE, INSTALL/REMOVE - LPT NOZZLE | 1 | |
| 10C1063G04 | Fixture,install/remove-lpt nozzle | 1 | |
| 10C1075G03 | Fixture,installation-radial,drive shaft | 1 | |
| 10C1107G01 | FIXTURE, INSTALL/REMOVE - LPT MODULE (INSTALL/REMOVE FIXTURE) | 1 | |
| 10C1107G02 | Fixture, Install/ Remove - Lpt Module | 1 | |
| 10C1120G01 | FIXTURE, INSTALL/REMOVE - NO. 5 BEARING RETAINING NUT (INSTALL/REMOVE FIXTURE) (SUPERSEDED BY 10C1120G02) | 1 | |
| 10C1120G02 | FIXTURE, INSTALL/REMOVE - NO. 5 BEARING RETAINING NUT (INSTALL/REMOVE FIXTURE) (SUPERSEDES 10C1120G01) | 1 | |
| 10C1132P01 | FIXTURE, INSTALLATION - INNER COOLING AIR DUCT | 1 | |
| 10C1173G01 | Fixture,install/remove- no 5 bearing retaining nut | 1 | |
| 10C1222G01 | FIXTURE, INSTALL/REMOVE - AIR/OIL SEPARATOR NUT | 1 | |
| 10C1222G02 | Fixture, Install/Remove Air/Oil Separator Nut | 1 | |
| 10C1250G01 | FIXTURE, INSTALL/INSPECT - HPT SHROUD SUPPORT | 1 | |
| 10C1272G02 | Fixture, Vibrate - Compressor Rotor Blades, Remove and Install | 1 | |
| 10C3111G01 | Fixture,installation-oil separator nut | 1 | |
| 10C3112G01 | Fixture,installation-rear retaining | 1 | |
| 11C3017G02 | Fixture,install/remove-stg 2 aft blade retainer | 1 | |
| 11C3033G03 | Fixture，install/remove-coupling nut，HPT PTR STG 2 | 1 | |
| 11C3050G01 | Fixture,assy-vertical,remove/install,combustor | 1 | |
| 11C3143 | FIXTURE, INSTALL-STG 1 HANGER/SUPPORT HPT STATOR CASE | 1 | |
| 11C3143G04 | Fixture,install-stg 1 hanger/support hpt stator case | 1 | |
| 11C3237G02 | Fixture，restrain-installation outer guide vane | 1 | |
| 11C3267 | FIXTURE, INSTALL/REMOVE-HEAT SHIELD, HP TURB ROTOR | 1 | |
| 11C3347G02 | FIXTURE, INSTALL/REMOVE - HPC ROTOR TUBE CARRIER | 1 | |
| 11C3353G03 | FIXTURE, INSTALL/REMOVAL - TUBE CARRIER RETAINING NUT - HPC ROTOR | 1 | |
| 11C3354G03 | Fixture，install-blade retainer，stage 1 | 1 | |
| 11C3550G02 | Fixture,handling/installation-No.5 brg housing | 1 | |
| 11C4412 | FIXTURE, INSTALL/REMOVE - LRU | 1 | |
| 11C4412G02 | FIXTURE, INSTALL/REMOVE - LINE REPLACEMENT | 1 | |
| 11C4412G04 | FIXTURE, INSTALL/REMOVE - LINE REPLACEABLE UNITS | 2 | |
| 11C4413 | FIXTURE, INSTALL/REMOVE - TRIM | 1 | |
| 11C4413G05 | FIXTURE, INSTALL/REMOVE - TRIM BALANCE CLIP - STAGE 7 LPT BLADE | 1 | |
| 11C4562G03 | Fixture,installtion-interstage seal high pressure turbine rotor | 1 | |
| 11C4605G01 | Fixture,install/remove-coupling nut,hpt rotor | 1 | |
| 11C4609G04 | FIXTURE, INSTALL/REMOVE - TRIM BALANCE CLIP - STAGE 7 LPT BLADE | 1 | |
| 11C4641G01 | FIXTURE, INSTALL/REMOVE - FUEL SPLIT VALVE | 2 | |
| 11C4649G01 | FIXTURE, INSTALL/REMOVE - EEC | 1 | |
| 11C4665G01 | Fixture,install/remove-accessory gearbox module | 1 | |
| 11C4689P01 | Fixture，installation-hpc aft stator wear guide | 1 | |
| 11C4693G01 | FIXTURE, INSTALL/REMOVE - MAIN FUEL OIL HEAT EXCHANGER | 1 | |
| 11C4714 | FIXTURE, PRESS - INSTALLATION OUTER RETAINER, AIR ADAPTER | 1 | |
| 11C4803G01 | Fixture，install-HPCS deflector | 1 | |
| 11C5014G01 | Fixture,Install-Inserts, Case Cdn | 1 | |
| 18C1020G02 | Fixture,install - no 4 brg & seals | 1 | |
| 18C1034 | FIXTURE, INSTALL/REMOVE - | 1 | |
| 18C1040G01 | Fixture,install/remove-no.4 brg outer race | 1 | |
| 18C1043G01 | Fixture,install/remove-hpt intershaft seal arm | 1 | |
| 18C1045G01 | Fixture, Installtcf Seal, Fwd | 1 | |
| 18C1075 | FIXTURE, INSTALL - STG. 1 & 2 RETAINER, HPTR | 1 | |
| 18C1078 | FIXTURE, TIE-ROD / INSTALLATION | 1 | |
| 18C1079 | FIXTURE, INSTALL - SHANK NUTS | 1 | |
| 18C1079G01 | Fixture,install-shank nuts | 1 | |
| 18C1080G01 | Fixture,lift-hptr install/remove | 1 | |
| 18C1233 | FIXTURE, INSTALL - STG 1 HANGER/SUPPORT STATOR CASE - MANUAL | 1 | |
| 18C1407G01 | Fixture,installation-fwd retaining ring | 1 | |
| 18C1416 | FIXTURE, INSTALL/REMOVE FWD./AFT SHAFT COVER | 1 | |
| 18C1568 | FIXTURE, INSTALL - AGB | 1 | |
| 18C1610 | FIXTURE, INSTALL/REMOVE-LINE REPLACEABLE UNITS | 1 | |
| 18C1633 | FIXTURE, REMOVE/INSTALL - LOWER FFD PANEL | 1 | |
| 19C0524G01 | Fixture, Install - Aft Air Seal | 1 | |
| 1C6103 | FIXTURE, BLADE INSTALL/REMOVE - PT ROTOR | 1 | |
| 1C6872G01 | FIXTURE, INSTALLATION/REMOVAL, GEARBOX ASSY | 1 | |
| 1C6902 | FIXTURE, REMOVE/INSTALL - COMP | 1 | |
| 1C6902G01 | FIXTURE, REMOVE/INSTALL - COMP | 1 | |
| 1C6978 | FIXTURE, INSTALL. & REMOVAL, HORIZ. - PWR TURB. | 1 | |
| 1C6978 REV G | FIXTURE, INSTALL. & REMOVAL, HORIZ. - PWR TURB. | 1 | |
| 1C8134 | FIXTURE, INSTALL & REMOVE COMPR ROTOR HUB TIE | 1 | |
| 1C8134G01 | FIXTURE, INSTALL & REMOVE COMPR ROTOR HUB TIE | 1 | |
| 1C8305 | FIXTURE, INSTALL/REMOVE-POWER TURBINE, AFT SHAFT S | 1 | |
| 1C9318G01 | FIXTURE, INSTALL/REMOVE - RETAINER RING LPT/MID SHAFT | 1 | |
| 1C9319G01 | FIXTURE, INSTALL/REMOVE - NO. 6 BEARING PLUG | 1 | |
| 1C9336G01 | FIXTURE, ASSEMBLY, INSTALL / REMOVE - AFT DRIVE SHAFT NUT | 1 | |
| 1C9422G01 | FIXTURE, INSTALL/REMOVE-CRF AFT CAS | 1 | |
| 1C9422G02 | Fixture, Installation/Removal - CRF Aft Case | 1 | |
| 1C9608 | FIXTURE, INSTALL/REMOVE - HP TURB MODULE ASSEMBLY | 1 | |
| 1C9608G01 | Fixture, Install-Remove - HP Turbine Module | 1 | |
| 1C9608G02 | FIXTURE, INSTALL/REMOVE - HP TURBINE MODULE | 1 | |
| 1C9608P11 | Fixture,Install/Remove-Hp Turb ,Module Assembly | 1 | |
| 1C9618G01 | Fixture, Install/Remove - Retainer Ring LPT/Mid-Shaft | 1 | |
| 1F10152 | Fixture, Remove/Install | 1 | |
| 1P16494 | FIXTURE, INSTALLATION | 1 | |
| 2306-T003-401 | FIXTURE, INSTALLATION - SPRING | 1 | |
| 247C5020 | FIXTURE, INSTALL/REMOVE-MID SHAFT ASSEMBLY | 1 | |
| 247C5307 | FIXTURE, INSTALL SPRING ASSEMBLY | 1 | |
| 247C5361 | FIXTURE, INSTALL/REMOVE MID SHAFT ASSEMBLY | 1 | |
| 2550958 | FIXTURE, PIN, INSTALLATION & REMOVAL | 1 | |
| 2C14084G01 | FIXTURE, INSTALL/REM | 3 | |
| 2C14107 | FIXTURE, REMOVE/INSTALL ACCESS GEARBOX DRIVE SHAFT | 1 | |
| 2C14107 REV D | FIXTURE, REMOVE/INSTALL ACCESS. GEARBOX DRIVE SHAFT | 1 | |
| 2C14107G01 | FIXTURE, REMOVAL/INSTALL-AGB DRIVE SHAFT | 13 | |
| 2C14113G01 | FIXTURE, INSTALL AND REMOVE-COMP.ROTOR FWD. SHAFT SPLINE ADAPTER | 3 | |
| 2C14131G02 | FIXTURE, SEATING CHECK - HPTR (WITH FAN AND MID SHAFT INSTALL) | 4 | |
| 2C14137G01 | TOOL - FIXTURE, ACCESSORY GEAR BOX (AGB) MATING RING INSTALL | 10 | |
| 2C14137G02 | TOOL - FIXTURE, ACCESSORY GEAR BOX (AGB) MATING RING INSTALL | 8 | |
| 2C14199 | FIXTURE, INSTALL REMOVE-HP TURB MOD. ASSY | 1 | |
| 2C14199 REV V | FIXTURE, INSTALL REMOVE-HP TURB MOD. ASSY | 1 | |
| 2C14199G03 | FIXTURE, INSTALL/REMOVE HPT MODULE ASSEMBLY | 1 | |
| 2C14199G06 | FIXTURE, INSTALL/REM | 1 | |
| 2C14199G07 | FIXTURE, INSTALL AND REMOVE - HP TURBINE MODULE ASSEMBLY | 4 | |
| 2C14199G08 | FIXTURE, INSTALL/REM | 1 | |
| 2C14199G09 | FIXTURE, INSTALL/REMOVE - HPT MODULE (USE FOR PB) | 1 | |
| 2C14199G10 | FIXTURE, INSTALL/REMOVE - HPT MODULE ASSEMBLY | 1 | |
| 2C14644 | FIXTURE, INSTALL/REMOVE ACCESS. GEARBOX MODULE | 1 | |
| 2C14644 REV K | FIXTURE, INSTALL/REMOVE ACCESS. GEARBOX MODULE | 1 | |
| 2C14644G02 | FIXTURE, INSTALL/REM | 1 | |
| 2C14644G03 | FIXTURE, INSTALL/REM | 1 | |
| 2C14661G01 | FIXTURE, INSTALL/REM | 2 | |
| 2C14661G02 | FIXTURE, INSTALLATION/ REMOVAL COMPRESSOR REAR FRAME ASSEMBLY ( INSTALLATION/ REMOVAL FIXTURE ) | 1 | |
| 2C14676G01 | FIXTURE, INSTALLATION / REMOVAL ‐ OUTER AIR TUBE, STAGE 1 NOZZLE | 1 | |
| 2C14691 | FIXTURE, INSTALL/REMOVE COMBUSTER | 1 | |
| 2C14691 REV C | FIXTURE, INSTALL/REMOVE COMBUSTER | 1 | |
| 2C14691G01 | FIXTURE, INSTALLREMOVE COMBUSTOR | 2 | |
| 2C14718G02 | Fixture,install& remove-air tube hp turb stg 2 nozzle | 2 | |
| 2C14773 | FIXTURE, INSTALL/REMOVE - STG 1 FAN DISK NUTS | 1 | |
| 2C14773G03 | FIXTURE, INSTALL/REMOVE | 1 | |
| 2C14797 | FIXTURE, INSTALL-REMOVE-MAIN ENGINE FUEL CONTROL | 1 | |
| 2C14797 REV B | FIXTURE, INSTALL/REMOVE -MAIN ENG. FUEL CONTROL | 1 | |
| 2C14824 | FIXTURE,INSTALL REMOVE-THRML SHLD HP TURB ROTOR DISK | 1 | |
| 2C14824G04 | Fixture, install remove - thrml shld hp turb rotor disk | 1 | |
| 2C14825G01 | FIXTURE, INSTALLATION AND REMOVAL - HPT | 1 | |
| 2C14825G03 | FIXTURE, INSTALLATION AND REMOVAL - HPT | 1 | |
| 2C14836 | FIXTURE, INSTALL/REMOVE | 1 | |
| 2C14836G01 | FIXTURE, INSTALL/REMOVE - STAGE 2 AFT BLADE RETAINER (INSTALL/REMOVE FIXTURE) | 1 | |
| 2C14836G02 | FIXTURE, INSTALL/REMOVE - STAGE 2 AFT BLADE RETAINER (INSTALL/REMOVE FIXTURE) | 1 | |
| 2C14852G01 | FIXTURE, INSTALL/REM | 1 | |
| 2C14858P02 | FIXTURE, INSTALLATION-HPC BUMPER | 1 | |
| 2C14871G01 | FIXTURE, INSTALL \ REMOVE-MANIFOLD NO 1 BEARING | 6 | |
| 2C14871G02 | FIXTURE,INSTALL/REMOVE-MANIFOLD N°1 BEARING | 3 | |
| 2C14871G03 | Fixture, Installation/Removal - Manifold No. 1 Bearing | 1 | |
| 2C18049G01 | FIXTURE, INSTALL/REMOVE, SPACER & CENTER VENT TUBE (FIXTURE) | 1 | |
| 2C18062G01 | FIXTURE, INSTALL/REMOVE - LPT MOD/FAN FWD SFT | 1 | |
| 2C18062G02 | FIXTURE, INSTALL/REMOVE - LPT MODULE/FAN FORWARD SHAFT (FIXTURE) | 1 | |
| 2C6122 | FIXTURE, INSTALL & REMOVAL - BOLTS, FWD FAN SHAFT | 1 | |
| 2C6122 REV G | FIXTURE, INSTALL & REMOVAL - BOLTS, FWD FAN SHAFT | 1 | |
| 2C6122G02 | FIXTURE, INSTALL/REMOVE, BOLTS ‐ FORWARD FAN SHAFT | 1 | |
| 2C6356 | FIXTURE, INSTALL - NO.4 BALL BEARING | 1 | |
| 2C6356G01 | FIXTURE, INSTALL-NO.4 BEARIG | 1 | |
| 2C6557 | FIXTURE, INSTALL S2 | 1 | |
| 2C6588 | FIXTURE,INSTALL/REMOVE-C/R FOR | 1 | |
| 2C6588G01 | FIXTURE,INSTALL/REMOVE-C/R FOR | 1 | |
| 2C81012G01 | FIXTURE, INSTALL SPIRAL RING | 1 | |
| 2C81013G01 | FIXTURE, AFT COUPLING NUT DRIVE SHAFT SPIRAL RING INSTALLATION (SPIRAL RING FIXTURE) | 1 | |
| 2C81016G01 | FIXTURE, INSTALL, SPIRAL RING | 1 | |
| 2C81220G01 | FIXTURE, INSTALLATION | 1 | |
| 2C81330G01 | Fixture, Install / Remove No 3 Bearing Outer Race | 1 | |
| 2C81445G01 | FIXTURE, INSTALL/REMOVE | 1 | |
| 2C81452 | FIXTURE, INSTALL/REMOVE | 1 | |
| 2C81452G02 | FIXTURE, INSTALL/REMOVE STAGE 1 | 1 | |
| 2C81456G01 | FIXTURE, INSTALL/REMOVE SPACER | 1 | |
| 2C81461G01 | FIXTURE, INSTALL - RETAINING RING | 1 | |
| 2C81465G01 | Fixture, Install/Remove- Stg 1, Fwd Cooling Plate | 1 | |
| 2C81549G01 | FIXTURE, INSTALL NOZZLE (NOZZL | 1 | |
| 2C81549G03 | Fixture,install-stg 3 nozzle | 1 | |
| 2C81560G01 | FIXTURE, INSTALL, NO. 4 NOZZLE | 1 | |
| 2C81560G02 | Fixture,installation nozzle,stage 4 | 1 | |
| 2C81608 | FIXTURE, INSTALL/REMOVE AGB - | 1 | |
| 2C81608G01 | FIXTURE, INSTALL/REMOVE AGB - | 1 | |
| 2C81705G01 | Fixture,install hpt rotor | 1 | |
| 2C81945G01 | Fixture，install ring,mating axis b | 2 | |
| 2C81946G01 | Fixture，install ring,mating axis d | 2 | |
| 2C81969 | FIXTURE, INSTALL/REMOVE, STG 4 AIR CONDUITS | 1 | |
| 2C81969G01 | FIXTURE, INSTALL/REMOVE, STG 4 AIR CONDUITS | 1 | |
| 2C91367G03 | FIXTURE, INSTALL - SHROUD RETAINERS | 1 | |
| 2C91380G01 | FIXTURE, INSTALL - TRANSFER TUBE | 1 | |
| 2C91381G01 | Fixture,install - retaining ring transfer tube | 2 | |
| 390700GSE1-1001 | ALIGNMENT FIXTURE, INSTALL TOOL | 7 | |
| 5815A0000-01 | FIXTURE, RETAINING RING INSTALLATION | 1 | |
| 71604 | Installing Fixture, Compensator Seat | 1 | |
| 7C1160G01 | Fixture,installation-interstage seal,hptr | 1 | |
| 7C2006G03 | Fixture,install/remove-hp turb inner stg seal | 1 | |
| 7C2071G02 | Fixture,install/remove-shank nut,disk,hpt rotor | 1 | |
| 7C2177G01 | Fixture,install/remove-no 4 brg fwd spacer | 1 | |
| 7C2247 | FIXTURE, INSTALL/REMOVE A SUMP FWD SPANNER NUT | 1 | |
| 7R1004 | (RT) FIXTURE, INSTALLATION - WEAR STRIP | 1 | |
| 7R1004G01 | FIXTURE FIXTURE, INSTALLATION WEAR STRI | 1 | |
| 834739 | Fixture, Installation, Turbine Nozzle | 1 | |
| 6799596 | "FIXTURE, INSTALLATION SPEED SENSITIVE | 2 | |
| 834739-1 | FIXTURE, INSTALLATION, TURBINE NOZZLE | 1 | |
| 856A1038 | FIXTURE, INSTALLATION - IGB BEARING AND SPACER | 1 | |
| 856A1038G01 | Fixture, Installation - IGB Bearing and Spacer (installation fixture) | 9 | |
| 856A1099 | FIXTURE, INSTALLATION AND REMOVAL - HPT AFT OUTER AIR SEAL | 1 | |
| 856A1099G01 | FIXTURE, INSTALLATIO | 6 | |
| 856A1099P01 | FIXTURE, INSTALL/REMOVAL - HPT AFT OUTER AIR SEAL (INSTALL/REMOVAL FIXTURE) | 1 | |
| 856A1111G01 | FIXTURE, INSTALL - NO. 4 BEARING OUTER RACE | 3 | |
| 856A1120 | FIXTURE, INSTALL AND REMOVE - IGB MODULE | 1 | |
| 856A1120G05 | FIXTURE, INSTALL AND REMOVE - IGB MODULE (INSTALL AND REMOVE FIXTURE) | 2 | |
| 856A1143 | FIXTURE, INSTALLATION - LP NOZZLE RETAINING RING | 1 | |
| 856A1143G02 | FIXTURE, INSTALLATION - OUTER | 8 | |
| 856A1143G03 | FIXTURE, INSTALLATION - OUTER COOLING | 1 | |
| 856A1145 | FIXTURE, INSTALLATION - OUTER COOLING AIR DUCT | 1 | |
| 856A1145P02 | FIXTURE, INSTALLATION - OUTER COOLING AIR DUCT | 3 | |
| 856A1145P03 | FIXTURE, INSTALLATION - OUTER COOLING AIR DUCT | 9 | |
| 856A1146 | FIXTURE, INSTALLATION - INNER COOLING AIR DUCT | 1 | |
| 856A1146P02 | Fixture, Installation - Inner Cooling Air Duct (installation fixture) | 8 | |
| 856A1290G01 | FIXTURE, INSTALL AND REMOVE | 7 | |
| 856A1291 | FIXTURE, INSTALL & REMOVE - INLET GEAR - BOX MODULE | 1 | |
| 856A1291 G05 | FIXTURE, INSTALL & REMOVE - INLET GEARBOX MODULE | 1 | |
| 856A1291G01 | FIXTURE, INSTALL & REMOVE - INLET GEAR - BOX MODULE | 1 | |
| 856A1291G02 | FIXTURE, INSTALL & REMOVE - INLET GEAR - BOX MODULE | 1 | |
| 856A1291G03 | FIXTURE, INSTALL & REMOVE - INLET GEAR - BOX MODULE | 1 | |
| 856A1291G04 | FIXTURE, INSTALL & REMOVE - INLET GEAR - BOX MODULE | 1 | |
| 856A1291G05 | FIXTURE, INSTALL & REMOVE - INLET GEARBOX MODULE | 1 | |
| 856A1291G06 | FIXTURE, INSTALL & REMOVE - INLET GEAR - BOX MODULE | 3 | |
| 856A1291G07 | FIXTURE, INSTALL & REMOVE - INLET GEAR - BOX MODULE | 1 | |
| 856A1291G08 | FIXTURE, INSTALL AND REMOVE-INLET GEARBOX MODULE | 8 | |
| 856A1291G09 | FIXTURE, INSTALL AND REMOVE - INLET GEARBOX MODULE (INSTALL AND REMOVE FIXTURE) | 4 | |
| 856A1291G10 | FIXTURE, INSTALL & REMOVE - INLET GEAR - BOX MODULE | 7 | |
| 856A1291G35 | FIXTURE, INSTALL AND REMOVE - INLET GEARBOX MODULE | 1 | |
| 856A1291P35 | FIXTURE, INSTALL AND REMOVE - INLET GEARBOX MODULE | 4 | |
| 856A1358 | FIXTURE, REMOVE/INSTALL PART | 2 | |
| 856A1358G01 | Fixture, Install / Remove | 1 | |
| 856A1358G02 | FIXTURE, INSTALL/REMOVE - MODULE 12 | 8 | |
| 856A1374 | FIXTURE, INSTALL/REMOVE - AIR SEAL IGB (FIXTURE) | 1 | |
| 856A1374G02 | FIXTURE, INSTALL/REMOVE - AIR SEAL IGB (FIXTURE) | 2 | |
| 856A1387G01 | FIXTURE, INSTALL/REMOVE | 3 | |
| 856A1389G01 | FIXTURE, INSTALL - NO. 4 BRG OUTER | 8 | |
| 856A1390G01 | FIXTURE, INSTALL - RETAINING CLIP, HPT SHROUD | 1 | |
| 856A1490 | FIXTURE, INSTALL/REMOVE MODULE 10 | 1 | |
| 856A1490G01 | FIXTURE, INSTALL/REMOVE MODULE 10 | 1 | |
| 856A1490G02 | FIXTURE, INSTALL/ REMOVE - MODULE 12 (INSTALL/REMOVE FIXTURE) | 1 | |
| 856A1490G04 | FIXTURE, INSTALL/REMOVE | 3 | |
| 856A1490G05 | FIXTURE, INSTALL/REMOVE MOD 12 FOR - | 6 | |
| 856A1501G01 | Fixture, Install and Remove - IGB Retainer Pins | 4 | |
| 856A1503G01 | FIXTURE, INSTALL/REMOVE | 1 | |
| 856A1603 | FIXTURE, INSTALL/REMOVE - HPT ROTOR FWD OUTER SEAL | 1 | |
| 856A1603G03 | FIXTURE, INSTALL/REMOVE - HPT ROTOR FWD OUTER SEAL | 3 | |
| 856A1603G05 | FIXTURE, INSTALL/REMOVE - HPTR FORWARD OUTER SEAL (INSTALL/REMOVAL FIXTURE) (SB 72-0643) | 2 | |
| 856A1603G07 | FIXTURE, INSTALL/REMOVE - HPT ROTOR FWD OUTER SEAL | 2 | |
| 856A1603G08 | FIXTURE, INSTALL/REMOVE - HPT ROTOR FWD OUTER SEAL | 3 | |
| 856A1619G01 | FIXTURE, LIFT-FIXT, INSTALL/REMOVE | 6 | |
| 856A1621G01 | Fixture, Lift - Fixture Install/Remove, HP Turbine Rotor Forward Outer Seal (lift fixture) | 3 | |
| 856A1826G01 | Fixture, Install/Remove - No. 3 Stationary Air Seal (fixture) | 3 | |
| 856A1833G01 | FIXTURE,INSTALL - RETAINING CLIP, HPT | 4 | |
| 856A1845G01 | FIXTURE, ALIGNING- HIGH PRESSURE COMPRESSOR TO HOLD HP COMPRESSOR VANE SECTOR WHILE INSTALLING AND REMOVING SEALS | 3 | |
| 856A1868 | FIXTURE, INSTALL/REMOVE-HP TURB ROTOR FWD OUTER SEAL | 1 | |
| 856A1868G01 | FIXTURE, INSTALL/REMOVE-HP TURB ROTOR FWD OUTER SEAL | 4 | |
| 856A1868G02 | FIXTURE, INSTALL/REMOVE-HP TURB ROTOR FWD OUTER SEAL | 1 | |
| 856A1868G03 | FIXTURE, INSTALL/ REMOVE-HP TURB | 3 | |
| 856A2215G01 | FIXTURE, INSTALL - NO. 4 BRG OUTER RACE (INSTALLATION FIXTURE) | 1 | |
| 856A2308G02 | FIXTURE, INSTALL/REMOVE | 9 | |
| 856A2310G02 | FIXTURE, INSTALL - RESTRAINING CLIP | 10 | |
| 856A2316G01 | FIXTURE, INSTALL/REMOVAL | 13 | |
| 856A2379G01 | FIXTURE, INSTALL/REMOVE | 7 | |
| 856A2384G01 | FIXTURE, REMOVAL/INSTALLATION - LPT BLADES STAGES 1 AND 5 (REMOVAL/INSTALLATION FIXTURE | 1 | |
| 856A2618G04 | FIXTURE, INSTALL AND REMOVE - INLET GEARBOX MODULE | 11 | |
| 856A2655 | FIXTURE, INSTALL/REMOVE RADIAL DRIVE SHAFT HSGS. | 1 | |
| 856A2655 REV A | FIXTURE, INSTALL/REMOVE RADIAL DRIVE SHAFT HSGS. | 1 | |
| 856A2655G02 | FIXTURE, INSTALL/REMOVE - RADIAL DRIVE SHAFT HOUSINGS (FIXTURE) | 1 | |
| 856A2655G03 | Fixture, Install/Remove - Radial Drive Shaft Housings (fixture) | 5 | |
| 856A2694G01 | FIXTURE, INSTALLFREMOVE - RADIAL DRIVE SHAFT HOUSINGS (FIXTURE) | 4 | |
| 856A2705G01 | FIXTURE, REMOVAL/INSTALLATION AND HANDLING - BOOSTER ROTOR/STATOR ASSEMBLY | 1 | |
| 856A2705G02 | FIXTURE, REMOVAL/INSTALLATION AND HANDLING - BOOSTER ROTOR/STATOR ASSEMBLY | 3 | |
| 856A2705G03 | FIXTURE, REMOVAL/INSTALLATION AND HANDLING - BOOSTER ROTOR/STATOR ASSEMBLY | 4 | |
| 856A2719 | FIXTURE, SUPPORT - REMOVE/INSTALL TGB (SUPPORT FIXTURE) | 4 | |
| 856A2719G01 | FIXTURE, SUPPORT - REMOVE/INSTALL TGB (SUPPORT FIXTURE) | 2 | |
| 856A2719G02 | FIXTURE, SUPPORT - REMOVE/INSTALL TGB (SUPPORT FIXTURE) | 7 | |
| 856A2719G03 | FIXTURE, SUPPORT - REMOVEJ INSTALLTGB (SUPPORT FIXTURE) | 12 | |
| 856A2778G01 | FIXTURE, INSTALLATION SHIELD LPT | 7 | |
| 856A3429G01 | FIXTURE, INSTALLATION SHIELD LPT | 3 | |
| 856A3503 G01 | FIXTURE, REMOVAL/INSTALLATION AND HANDLING - BOOSTER | 3 | |
| 856A3503G01 | FIXTURE, REMOVAL/INSTALLATION AND HANDLING | 3 | |
| 856A3503G02 | FIXTURE, REMOVAL/INSTALLATION AND HANDLING - BOOSTER ROTOR/STATOR ASSY | 5 | |
| 856A3722 | FIXTURE, INSTALLATION - NO. 1 BEARING SUPPORT (INSTALLATION FIXTURE) | 1 | |
| 856A3722G02 | FIXTURE, INSTALLATION - NO. 1 BEARING SUPPORT (INSTALLATION FIXTURE) | 1 | |
| 856A3722G04 | Fixture, Installation - No. 1 Bearing Support (installation fixture) | 9 | |
| 856A3739 | FIXTURE, INSTALLATION | 1 | |
| 856A3739G02 | Fixture, Installation - No. 2 Bearing Oil Nozzle (installation fixture) | 3 | |
| 856A3756 | FIXTURE, INSTALL LPT STG2 | 1 | |
| 856A3756G01 | Fixture, Installation - Shield, Stage 2 (fixture) | 6 | |
| 856A3756G02 | FIXTURE, INSTALLATION - SHIELD, STAGE 2 (FIXTURE) | 5 | |
| 856A3757 | FIXTURE, INSTALLATION SHIELD STG 1 | 1 | |
| 856A3757G01 | Fixture, Install LPT Stage 3 Shield | 1 | |
| 856A3757G02 | Fixture, Installation - Shield, Stage 3 (fixture) | 5 | |
| 856A3757G03 | FIXTURE, INSTALLATION SHIELD LPT STAGE 3 | 4 | |
| 856A3763G03 | FIXTURE, INSTALLATION - SHIELD, STAGE 3 | 6 | |
| 856A3853 | FIXTURE, SUPPORT, REMOVAL/INSTALLATION - TGB | 1 | |
| 8C2011G02 | Fixture,install/remove-hpt rotor,fwd seal | 1 | |
| 8C2011G04 | Fixture,install/remove-hpt rotor,fwd seal | 1 | |
| 8C2018 | FIXTURE, INSTALL/ REMOVE STG 2 AFT BLADE RETAINER | 1 | |
| 8C2018G02 | Fixture,Install /Remove-Stg 2 Aft Blade Retainer/Stg2 Hptr Sub-Assembly | 1 | |
| 8C2067 | FIXTURE, INSTALLATION - #4 BEARING CARBON SEAL | 1 | |
| 8C2069G02 | Fixture,guide tube-tcf,vertical installation | 1 | |
| 8C2070 | FIXTURE, GUIDE TUBE - TCF, HORIZONTAL INSTALL | 1 | |
| 8C2070G02 | Fixture,guide tube-tcf,horizontal install | 1 | |
| 8C2079G01 | Fixture，install stage 2 disk and midseal hptr | 1 | |
| 8C2083G01 | Fixture，install/remove aspirating seal，M10 | 1 | |
| 8C2162 | FIXTURE, INSTALL – STATOR WEAR GUIDES | 1 | |
| 8C2198 | FIXTURE, INSTALL/REMOVE - HPCS BUSHINGS | 1 | |
| 8C2418G01 | Fixture, Install Aft Retaining Ring | 1 | |
| 8C2423G01 | Fixture,installation-no 5 bearing carbon seal | 1 | |
| 8C2455G02 | FIXTURE, INSTALL/REMOVE – TRIM BALANCE CLIP – STAG | 1 | |
| 8C2459 | FIXTURE, INSTALL/REMOVE-SHAFT COVER, FWD | 1 | |
| 8C2583 | FIXTURE, BUILD & INSTALL/REMOVE - ACCESSORY GEARBOX | 1 | |
| 8C2591G01 | Fixture,lift/installation-AGB(vert) | 1 | |
| 8C2615 | FIXTURE, INSTALL/REMOVE-FAN BLADE | 1 | |
| 8C2615G01 | Fixture,install/remove-fan blade | 1 | |
| 8C2615G02 | Fixture,install/remove-fan blade | 1 | |
| 8C2666 | FIXTURE, INSTALL/REMOVE-LINE REPLACEABLE UNITS | 1 | |
| 8C2666G03 | Fixture,install/remove-line replaceable units | 1 | |
| 8C2716G01 | Fixture,installation fwd outer seal | 1 | |
| 8C2716G02 | Fixture,installation fwd outer seal | 1 | |
| 8C2724 | FIXTURE, INSTALL - STG 1 AND 2 HANGER/SUPPORT STATOR CASE | 1 | |
| 8C2730 | FIXTURE, LIFT & INSTALL - STG 2 HPT NOZZLE ASSY | 1 | |
| 8C2730G01 | Fixture,install-stg 2 hpt nozzle assy | 1 | |
| 8C2736 | FIXTURE, INSTALLATION - HPT AIR DUCT / HPT ROTOR (STARTER LONG VERSION) | 1 | |
| 8C2895 | FIXTURE, INSTALL - FUEL PUMP, MFF ADAPTER | 1 | |
| 8C2897G01 | Fixture，install/remove-fmu vertical | 1 | |
| 8C2898G01 | Fixture，install/remove-fmu vertical | 1 | |
| 8C2899G01 | Fixture，install/remove-fmu vertical | 1 | |
| 8C2915G01 | Fixture,install-No.2 brg fwd inner race | 1 | |
| 8C3115G01 | Fixture,handling,installation No 5 brg hsg assy | 1 | |
| 9481M77 | FIXTURE, LIFT/INSTALL-STG 9/10 OGV | 1 | |
| 956A1005G03 | Fixture, Install/Removestg 2 Aft Blade Retainer | 1 | |
| 956A1007G01 | Fixture,install/remove-shank nut,hptr-stg 2 | 1 | |
| 956A1012G01 | Fixture,install/remove-coupling nut,hpt rotor | 1 | |
| 956A1022G01 | Fixture,install/remove-hpt rotor,fwd seal | 1 | |
| 956A1070G01 | Fixture,install-blade retainer,stage 1 | 1 | |
| 956A1089G02 | FIXTURE, INSTALL, RETAINING PI | 1 | |
| 956A1115G01 | Fixture,removal/installation retaining nut | 1 | |
| 956A1177G01 | Fixture,install-hpc aft stator wear guide | 1 | |
| 956A1211G03 | Fixture, installation hpt air duct hpt rotor | 1 | |
| 956A1216 | Fixture,buildup-lift&install stg 2 hpt nozzle assy | 1 | |
| 956A1257G01 | Fixture, Remove/Install - Variable Center Of Gravity 1000 Lb Max | 1 | |
| 956A1277G02 | Fixture,install-stg 1 hanger/support hpt stator case | 1 | |
| 956A1277G03 | Fixture,install-stg 1 hanger/support hpt stator case | 1 | |
| 956A1282G01 | Fixture,removal-install flange nuts,cdp | 1 | |
| 956A1286G01 | Fixture,buildup-lift&install stg 2 hpt nozzle assy | 1 | |
| 956A1287 | Fixture,buildup-lift&install stg 2 hpt nozzle assy | 1 | |
| 956A1287G01 | Fixture,buildup-lift&install stg 2 hpt nozzle assy | 1 | |
| 956A1525G01 | Fixture,install-bolts,self retaining ,igb | 1 | |
| 956A1536G01 | Fixture, Install And Remove - Retaining Pins Hpc Lock Nut | 1 | |
| 956A1536G02 | Fixture, Install And Remove - Retaining Pins Hpc Lock Nut | 1 | |
| 956A1727G03 | Fixture,installation-hpt fwd outer seal | 1 | |
| 956A1736G01 | Fixture,installation-hpt fwd outer seal | 1 | |
| 956A1738G01 | Fixture,install/remove-shank nut,hptr-stg 2 | 1 | |
| 956A1738G02 | Fixture,install/remove-shank nut,hptr-stg 2 | 1 | |
| 956A1739G01 | Fixture,installation-hpt fwd outer seal | 1 | |
| 956A1740G01 | Fixture,installation-hpt fwd outer seal | 1 | |
| 956A1743G01 | Fixture, Install / Remove - Hpc Stator Flange Shoulder Pins | 1 | |
| 956A1817G01 | Fixture, Installation - Retaining Ring, No 4 Bearing Spanner Nut | 1 | |
| 956A3005G01 | Fixture,install/remove-stg 2aft blade retainer | 1 | |
| 956A3005G03 | Fixture,install/remove-stg 2aft blade retainer | 1 | |
| 956A3064G01 | Fixture, Installstationary Oil & Air Seals, Fwd | 1 | |
| 956A3065G02 | Fixture，install-carbon seal,No.4 | 1 | |
| 956A3096G01 | Fixture,install-carbon seal No.4 | 1 | |
| 956A3114G01 | Fixture,install-retaining nut | 1 | |
| 956A3215G01 | Fixture,install-stg 1 hanger/support hpt stator case | 1 | |
| 956A3227G01 | Fixture,install-stg 1 hanger/support hpt stator case | 1 | |
| 956A3254G01 | Fixture, Build Up - Lift & Install Stg 2 Hpt Nozzle Assy | 1 | |
| 956A3255G01 | Fixture,build up-lift&install stg 2 hpt nozzle assy | 1 | |
| 956A3277G01 | Fixture,install-stg 1 hanger/support hpt stator case | 1 | |
| 956A3277G02 | Fixture,install-stg 1 hanger/support hpt stator case | 1 | |
| 956A3278G01 | Fixture,install-core wrench | 1 | |
| 956A3564G02 | Fixture,install and remove-retaining pins hpc lock nut | 1 | |
| 956A3564G03 | Fixture,install and remove-retaining pins hpc lock nut | 1 | |
| 956A3727G02 | Fixture,installation-hpt fwd outer seal | 1 | |
| 956A3728G01 | Fixture, Installation - Hpt Stg 1 Aft Retainer & Mid Seal | 1 | |
| 956A3739G01 | Fixture,installation-hpt fwd outer seal | 1 | |
| 956A3743G01 | Fixture, Install / Remove - Hpc Stator Flange Shoulder Pins | 1 | |
| 956A6021 | FIXTURE, INSTALL - TGB PISTON RING | 1 | |
| 956A6021G01 | FIXTURE, REMOVE/INSTALL TGB PISTON RING | 1 | |
| 956A6145 | FIXTURE, INSTALL - OGV CUP | 1 | |
| 956A6145G01 | FIXTURE, INSTALL - OGV CUP | 1 | |
| 956A6145G02 | FIXTURE, INSTALL -OGV CUP | 5 | |
| 956A6145G03 | FIXTURE, INSTALL - OGV CUP | 1 | |
| 956A6154G02 | Fixture,install rear seal support-vbvdoor | 1 | |
| 956A6154G03 | Fixture,install rear seal support-vbvdoor | 1 | |
| 956A6312G01 | Fixture,guide installation-lpt,rear frame | 1 | |
| 956A6312G02 | Fixture,guide installation-lpt,rear frame | 1 | |
| 956A6526G01 | Fixture，installation and removeal-retaining ring | 1 | |
| 956A6637G02 | FIXTURE, REMOVAL/INSTALLATION FAN SPINNER | 3 | |
| 956A6653G04 | Fixture,install-front vent tube | 1 | |
| 956A6655G01 | Fixture,install/remove-rear center vent tube | 1 | |
| 956A6655G03 | Fixture,install/remove-rear center vent tube | 1 | |
| 956A6678G02 | Fixture,removal/install-VFG | 1 | |
| 956A6803 | FIXTURE, INSTALL/REMOVE-SUPPORT BEARING 2 | 1 | |
| 956A6803G01 | Fixture，install/remove-support bearing 2 | 1 | |
| 956A6805G02 | Fixture，install/remove-support bearing1 pied de montage SP1 sur module | 1 | |
| 956A6847G01 | Fixture，install/remove-support bearing 1/2 | 1 | |
| 956A7014 | FIXTURE, REMOVE/INSTALL - PANEL FLOW PATH | 1 | |
| 956A7014G01 | FIXTURE, REMOVE/INSTALL - PANEL FLOW PATH | 4 | |
| 956A7015 | FIXTURE, REMOVE/INSTALL - SPLITTER FAIRING | 1 | |
| 956A7015G01 | FIXTURE, REMOVE/INSTALL - SPLITTER FAIRING | 3 | |
| 956A7018 | FIXTURE, REMOVE/INSTALL - ACCESSORY GEARBOX | 1 | |
| 956A7018G02 | FIXTURE, REMOVE/ INSTALL - AGB 1 | 4 | |
| 956A7606 | FIXTURE, REMOVE/INSTALL - TGB SLIDE | 2 | |
| 956A7606G01 | FIXTURE, REMOVE/INSTALL - TGB SLIDE | 1 | |
| 956A7606G02 | FIXTURE, INSTALL/REMOVE | 1 | |
| 956A7606G02? | FIXTURE, REMOVE/INSTALL - TGB SLIDE | 1 | |
| 956A7617 | FIXTURE, REMOVAL/INSTALL - FRONT SPINNER | 1 | |
| 956A7617G02 | FIXTURE, REMOVAL/INSTALL - FRONT SPINNER | 5 | |
| 956A7617G03 | FIXTURE, REMOVAL/INSTALL -FRONT SPINNER | 1 | |
| 956A7618 | FIXTURE, REMOVE /INSTALL - LUBRICATION UNIT | 1 | |
| 956A7618G02 | FIXTURE, REMOVE /INSTALL - LUBRICATION UNIT | 4 | |
| 956A7625 | FIXTURE, INSTALL - FRONT CENTEREING/INSTALL LPT | 1 | |
| 956A7632 | FIXTURE, INSTALL - RING RETAINER TGB SHAFT | 1 | |
| 956A7632G01 | FIXTURE, INSTALL - RING RETAIN | 5 | |
| 956A7632G02 | Fixture,install-ring retainer tgb shaft | 1 | |
| 956A8043G01 | FIXTURE, INSTALL - OUTER RADIAL SHAFT | 1 | |
| 956A8054G01 | Fixture,install-shroud fam frame | 1 | |
| 956A8074G01 | FIXTURE, REMOVE/INSTALL - PANEL FLOW PATH | 2 | |
| 956A8076G02 | FIXTURE, REMOVE/INSTALL - TGB ASSEMBLY | 3 | |
| 956A8102G01 | Fixture,install,remove-sleeve radial shaft outillage de mise en position fourreau rds | 1 | |
| 956A8102G02 | Fixture,install,remove-sleeve radial shaft outillage de mise en position fourreau rds | 1 | |
| 956A8102G03 | Fixture,install,remove-sleeve radial shaft outillage de mise en position fourreau rds | 1 | |
| 956A8104G01 | Fixture，install-n1 sensor bolt outillage de mise en position vis sonde | 1 | |
| 956A8104G02 | Fixture，install-n1 sensor bolt outillage de mise en position vis sonde | 1 | |
| 956A8402G01 | Fixture,install/remove-ring seal,rear enclosure | 1 | |
| 956A8402G02 | Fixture,install/remove-ring seal,rear enclosure | 1 | |
| 956A8402G03 | Fixture,install/remove-ring seal,rear enclosure | 1 | |
| 956A8403G01 | Fixture,install/remove-ring,seal outillage | 1 | |
| 956A8403G02 | Fixture,install/remove-ring,seal outillage | 1 | |
| 956A8403G03 | Fixture,install/remove-ring,seal outillage | 1 | |
| 956A8430G01 | Fixture,install-bolt d,retaining ring | 1 | |
| 956A8430G02 | Fixture,install-bolt d,retaining ring | 1 | |
| 956A8439G02 | Fixture, Install - Shroud, Lpt Stg 1 To 4, Segment | 1 | |
| 956A8601G01 | FIXTURE, INSTALL/REMOVE – TRV | 1 | |
| 956A8622G01 | Fixture,remove,install-lpt rear case assy | 1 | |
| 956A8631G01 | Fixture,install/remove-lpt nut,retaining ring | 1 | |
| 956A8663G01 | Fixture,lift,install-lpt rear frame assy | 1 | |
| 956A8663G02 | Fixture,lift,install-lpt rear frame assy | 1 | |
| 956A8670G01 | FIXTURE, REMOVAL/INSTALL - FRONT SPINNER | 3 | |
| 956A8670G02 | FIXTURE, REMOVAL/INSTALL FRONT SPINNER | 4 | |
| 956A8675 | FIXTURE, INSTALL - PLATFORM FRONT SHROUD | 1 | |
| 956A8675G01 | FIXTURE, INSTALL - PLATFORM FRONT SHROUD | 2 | |
| 956A8675G02 | FIXTURE, INSTALL - PLATFORM FRONT SHROUD | 6 | |
| 956A8675G03 | [KIT] FIXTURE, INSTALL - PLATFORM FRONT SHROUD | 2 | |
| 956A8675G04 | FIXTURE, INSTALL - PLATFORM FRONT SHROUD | 1 | |
| 956A8675G05 | FIXTURE, INSTALL - PLATFORM FRONT SHROUD | 1 | |
| 956A8685G02 | FIXTURE, REMOVE/INSTALL - TGB SLIDE | 4 | |
| 956A8686G01 | FIXTURE, INSTALL - TRANSFER SHAFT NUT RETAINER | 3 | |
| 956A8803G01 | Fixture，install-remove support bearing 2 | 1 | |
| 956A8805G01 | Fixture,install-remove support bearing 1 | 1 | |
| 956L6600G01 | FIXTURE, INSTALL - FUEL TUBE | 1 | |
| 9C1017G01 | FIXTURE, REMOVE/INSTALL - VARIABLE CENTER OF GRAVITY | 1 | |
| 9C1017G02 | FIXTURE, REMOVE/INSTALL - VARIABLE CENTER OF GRAVITY | 1 | |
| 9C1050G01 | FIXTURE, REMOVE/INSTALL - VARIABLE CENTER OF GRAVITY (CG BAR) | 1 | |
| 9C1127 | FIXTURE, INSTALL/REMOVE - SHAN | 1 | |
| 9C1132G05 | FIXTURE, INSTALL/REMOVE - LRU_B777-300ER TOOL INITIAL PROVISIONING_[9C1132G05] | 2 | |
| 9C1172G03 | Fixture，install/remove-accessory gearbox module | 1 | |
| 9C1238G04 | FIXTURE, INSTALL/REMOVE HEAT SHIELD, HIGH PRESSURE TURBINE ROTOR | 1 | |
| 9C1265G01 | Fixture,installation-balance arbor,hpt rotor | 1 | |
| 9C1310 | FIXTURE, INSTALL/REMOVE STAGE | 1 | |
| 9C1328G02 | Fixture,handling/installation-no 5 brg hsg assy | 1 | |
| 9C1361 | FIXTURE, INSTALL/REMOVE FAN | 1 | |
| 9C1361G01 | FIXTURE, REMOVAL/INSTALLATION SPINNER, FAN ROTOR (FIXTURE) | 1 | |
| 9C1499 | FIXTURE, INSTALLATION HPT AIR DUCT/HPT ROTOR DISK | 1 | |
| 9C3024 | FIXTURE, BUILD, LIFT & INSTALL-HPT NOZ ASSY | 1 | |
| 9C3049 | FIXTURE, INSTALL GUIDE FAN HUB ASSY | 1 | |
| 9C3140G05 | Fixture,install-hp turb inner stg seal | 1 | |
| 9C3144 | FIXTURE, INSTALLATION ASSEMBLY FAN STATOR | 1 | |
| 9C3144G01 | FIXTURE, INSTALLATION ASSEMBLY FAN STATOR | 1 | |
| 9C3185 | FIXTURE, INSTALL/REMOVE - COUPLING NUT, HPT RTR STG 2 | 1 | |
| 9C3403 | FIXTURE, INSTALL/REMOVE - LINE REPLACEABLE UNITS | 1 | |
| AGE17633 | FIXTURE, HOLDING, BEARING LINER INSTALL | 1 | |
| AGE17639 | Fixture, Holding Bearing Liner Install | 1 | |
| AGE21060 | FIXTURE, INSTALLA-TION-LICC/RICC | 1 | |
| AT-71603 | Installing Fixture, Elevator Compensator Seat | 1 | |
| AT-71604 | Installation Fixture, Compensator Seat | 1 | |
| C32034-227 | FIXTURE, MAIN LANDING GEAR, INSTALLATION AND REMOVAL | 12 | |
| C32034-273 | FIXTURE, MAIN LANDING GEAR, INSTALLATION AND REMOVAL | 6 | |
| C32034-339 | FIXTURE, MAIN LANDING GEAR, INSTALLATION AND REMOVAL | 11 | |
| C32034-9 | FIXTURE, MAIN LANDING GEAR, INSTALLATION AND REMOVAL | 10 | |
| DZZ7311-1 | Fixture, Pylon Installation | 2 | |
| F80166-1 | FIXTURE, TEST - PRESSURE RELIEF, FLAME ARRESTOR SURGE TANK (REQUIRED IF FLAME ARRESTOR IS INSTALLED) (THE BOEING COMPANY) | 26 | |
| G601R324001-1 | DOLLY FIXTURE, WHEELS AND BRAKES REMOVAL/INSTALLATION | 2 | |
| G700-343201-85 | FIXTURE, H.U.D.S BRACKET INSTALLATION | 1 | |
| GS14687-1 | FIXTURE, SWITCH INSTALLATION | 1 | |
| GS21982-1 | FIXTURE, INSTALLATION | 1 | |
| IAE1F10073 | FIXTURE, REMOVE/INSTALL | 1 | |
| IAE1F10111 | FIXTURE, INSTALL./REMOVAL | 1 | |
| IAE1F10261 | FIXTURE, REMOVE/INSTALL. | 1 | |
| IAE1P16010 | FIXTURE, INSTALL/REMOVE | 1 | |
| IAE1P16046 | FIXTURE, REMOVE/INSTALL LHT Dwg No.(537250041) | 3 | |
| IAE1P16077 | FIXTURE, INSTALL/REMOVE | 1 | |
| IAE1P16122 | FIXTURE, INSTALL LHT Dwg No.(537240024) | 1 | |
| IAE1P17750 | FIXTURE, INSTALL/REMOVE LHT Dwg No.(537250203) | 1 | |
| K-2733-02 | ADAPTER, FIXTURE, NLG INSTALLATION | 3 | |
| K32044-1 | TEST SUPPORT FIXTURE, TIRE PRESSURE SENSOR (TPS) INSTALLATION | 4 | |
| LTCT14491-01 | Fixture, Carrier Assembly, Shaft Removal/Installation | 1 | |
| P35 | FIXTURE, INSTALL AND REMOVE - INLET GEARBOX MODULE (INSTALL AND REMOVE FIXTURE) | 1 | |
| PWA 80262 | FIXTURE, REMOVE/INSTALL | 1 | |
| PWA 85520 | FIXTURE, INSTALL AND REMOVE | 1 | |
| PWA 85749 | FIXTURE, INSTALL AND REMOVE CONNECTOR | 2 | |
| PWA 85769 | FIXTURE, INSTALL/REMOVE | 1 | |
| PWA102124 | FIXTURE, INSTALL/REMOVE | 1 | |
| PWA107707 | FIXTURE, INSTALL/REMOVE (SUPERSEDES PWA 85769) | 1 | |
| PWA109641 | FIXTURE, INSTALL, TRIM BALANCE WEIGHT | 1 | |
| PWA111515 | FIXTURE, INSTALLATION | 1 | |
| PWA111529 | FIXTURE, INSTALLATION - ENGINE ASSY, FAN | 5 | |
| PWA111529 | FIXTURE, INSTALLATION | 5 | |
| PWA115244 | FIXTURE, INSTALLATION - ENG | 2 | |
| PWA211301 | FIXTURE,ALIGNING -#6 BRG,OUTER RACE INSTALLATION | 1 | |
| PWA211308 | FIXTURE, INSTALLATION | 1 | |
| PWA211312 | FIXTURE, INSTALLATION | 1 | |
| PWA211313 | FIXTURE FIXTURE, INSTALLATION | 2 | |
| PWA211838 | FIXTURE,COOLING-HPC, REAR HUB INSTALL | 1 | |
| PWA212237 | FIXTURE, INSTALL-CIC , REAR SEAL ASSEMBLY | 1 | |
| PWA212520 | FIXTURE, INSTALLATION - #3 FRONT FACE SEAL SUPPORT | 1 | |
| PWA214209 | FIXTURE, INSTALLATION TIE ROD,LPC | 1 | |
| PWA80262 | FIXTURE,REMOVE/INSTALL | 1 | |
| PWA85520 | FIXTURE, INSTALL AND REMOVE | 1 | |
| PWA85769 | FIXTURE, INSTALL/REMOVE (SUPERSEDED BY PWA 107707) | 1 | |
| PWA87034 | FIXTURE, INSTALL AND REMOVE | 1 | |
| PWA87360 | FIXTURE, INSTALL/REMOVE | 4 | |
| RBE1X56-131-407 | Tool, Fixture, Seal Installation | 2 | |
| RSE1040 | FIXTURE, PRIMARY NOZZLE INSTALLATION | 1 | |
| RSE1040 REV NC | FIXTURE, PRIMARY NOZZLE INSTALLATION | 1 | |
| RSEI040 | FIXTURE, PRIMARY NOZZLE INSTALLATION | 1 | |
| SPL-15094 | FIXTURE, INSTALL - OGV CUP | 1 | |
| SPL-1869 | FIXTURE, MAIN LANDING GEAR, INSTALLATION AND REMOVAL | 1 | |
| T-66639 | Assembly Fixture,Pin Installation | 1 | |
| T-66639PM | ASSEMBLY FIXTURE,PIN INSTALLATION | 1 | |
| T81450 | PIN INSTALLING FIXTURE, | 1 | |
| XPWA111720 | Fixture,install-hpt,rotor 1, heatshield | 1 | |
| lC6978 | FIXTURE, INSTALL. & REMOVAL, HORIZ. - PWR TURB. | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
