| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 856A1411G03 | FIXT RING | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 2024488-1 | BEARING PRESS FIXTURE | 1 | |
| (CALIB) 044A411058D | FIXTURE MLG BORING FIXTURE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 044AF124014D | FIXTURE MLG BORING FIXTURE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D57004038000 | FIXTURE FIXTURE BORING-CARDEN FITTING (CALIBRATION) (CALIBRATION) | 1 | |
| 044A411058D | MLG BORING FIXTURE | 1 | |
| 044A4411058D | MLG BORING FIXTURE | 1 | |
| 044AF1240014D | MLG BORING FIXTURE | 1 | |
| 044AF124014D | MLG BORING FIXTURE | 1 | |
| 0S22482 | MEASURING FIXTURE | 1 | |
| 0U131467 | SOLDERING FIXTURE | 1 | |
| 0U140573 | SPRING CRUSHING FIXTURE | 1 | |
| 105-14181W1 | NEEDLE BEARINGS ASSEMBLY FIXTURE | 1 | |
| 10C1062G01 | FIXTURE, PULLER - NO. 4 BEARING INNER RACE | 1 | |
| 10C1076G03 | FIXTURE, TORQUE - NO. 4 BEARING NUT (TORQUE FIXTURE) | 1 | |
| 10C1087G01 | FIXTURE, PULLER - NO. 5 BEARING AIR/OIL SEPARATOR (PULLER FIXTURE) | 1 | |
| 10C1103G01 | FIXTURE, CLAMPING - NO. 3 BEARING ASSEMBLY, INLET GEARBOX (CLAMPING FIXTURE) | 1 | |
| 10C1120G01 | FIXTURE, INSTALL/REMOVE - NO. 5 BEARING RETAINING NUT (INSTALL/REMOVE FIXTURE) (SUPERSEDED BY 10C1120G02) | 1 | |
| 10C1120G02 | FIXTURE, INSTALL/REMOVE - NO. 5 BEARING RETAINING NUT (INSTALL/REMOVE FIXTURE) (SUPERSEDES 10C1120G01) | 1 | |
| 10C1224G01 | FIXTURE, CENTERING - LPT SHAFT (CENTERING FIXTURE) | 1 | |
| 10C1241G01 | FIXTURE, PULLER - SPLITTER FAIRING F | 1 | |
| 10C1344 | FIXTURE, PULLER- NO 5 BEARING AIR/OIL SEPARATOR | 1 | |
| 114-1106 | Furnace Flattering Fixture | 1 | |
| 114-498 | BEARING CUP REMOVAL AND FIXTURES | 1 | |
| 114G1373-1 | FIXTURE, ALIGNMENT, BEARING SLIDING | 1 | |
| 11C3094 | FIXTURE - SEATING - CHECK-NO 2 BEARING | 1 | |
| 11C3094G02 | FIXTURE, SEATING, CHECK - NO. 2 BEARING | 1 | |
| 11C3118 | FIXTURE - LIFT & TURN NO. 2 BEARING HOUSING | 1 | |
| 11C3151 | FIXTURE - LIFT AND TURN NO. 1 BEARING SUPPORT HOUSING | 1 | |
| 11C3151G02 | FIXTURE, LIFT AND TURN NO. 1 BEARING SUPPORT HOUSING | 1 | |
| 11C3206G01 | FIXTURE, TARGET - OIL NOZZLE, NO. 1 BEARING | 1 | |
| 11C3334 | FIXTURE - TORQUE - NO. 5 BEARING SPANNER NUT | 1 | |
| 11C3454 | FIXTURE - FLOW CHECK-NO 5 LPT BEARING DAMPER | 1 | |
| 11C3454G02 | FIXTURE, FLOW CHECK - NO. 3 BEARING DAMPERS, FHF | 1 | |
| 11C3455 | FIXTURE - ALIGNMENT TUBE NO. 1 BEARING OIL SUPPLY | 1 | |
| 11C3543 | FIXTURE - BUILDUP - NO. 5 BEARING HOUSING (BUILDUP FIXTURE) | 1 | |
| 11C3550 | FIXTURE - HANDLING/INSTALLATION - NO. 5 BEARING HOUSING (HANDLING/INSTALLATION FIXTURE) | 1 | |
| 11C3596 | FIXTURE - PLUG - NO. 5 BEARING OIL FLOW (FLOW CHECK FIXTURE) | 1 | |
| 11C4232 | FIXTURE - RESTRAINING-SEAL - STATIONARY INNER FWD NO 5 BEARING | 1 | |
| 11C4233 | FIXTURE - RESTRAINING-COVER - SUMP NO 5 BEARING | 1 | |
| 11C4247 | FIXTURE - RESTRAINING RING MATING SEAL ROT NO 5 BRG | 1 | |
| 11C4254G01 | FIXTURE, CAL-ROD HEATER - NO. 1 BEARING HOUSING (208-240 VAC, 50-60 HZ) | 1 | |
| 11C4257 | FIXTURE - SEATING-NO 2 BEARING INNER RACE | 1 | |
| 11C4257G01 | FIXTURE, SEATING - NO. 2 BEARING INNER RACE | 1 | |
| 11C4258 | FIXTURE - SEATING-NO 1 BEARING - RLR - CYL - INNER RACE | 1 | |
| 11C4258G01 | SEATING FIXTURE, NO. 1 ROLLER BEARING, INNER RACE | 1 | |
| 11C4260 | FIXTURE - LIFT & TURN-FWD FAN SHAFT & NO 2 BEARING | 1 | |
| 11C4260G02 | FIXTURE, LIFT/TURN - FORWARD FAN SHAFT AND NO. 2 BEARING | 1 | |
| 11C4262 | FIXTURE, LIFT & TURN FWD FAN SHAFT & NO 2 BEARING | 1 | |
| 11C4523 | DISASSEMBLY FIXTURE-STAGE 5 RING | 1 | |
| 11C4523G01 | FIXTURE, DISASSEMBLY - STAGE 5 RING RETAINER | 1 | |
| 11C4599G01 | FIXTURE, HEAT GUN - NO. 2 BEARING HOUSING | 1 | |
| 11C4623 | FIXTURE - CLAMP-STG 10 OGV SEALING RING | 1 | |
| 11C4847G01 | FIXTURE, LIFT AND TURN NO. 2 BEARING HOUSING | 1 | |
| 12-43-04-102 | REAR AND FRONT WHEEL CENTERING FIXTURE | 1 | |
| 13P44-1F8 | angle measuring fixture | 1 | |
| 1525-510 | FIXTURE, BEARING PRELOAD | 1 | |
| 17312-0-201 | Bearing Press Fixture | 1 | |
| 17320-0-201 | Bearing Press Fixture | 1 | |
| 18C1042 | FIXTURE, LIFT - NO 5 BEARING SUPPORT | 1 | |
| 18C1180 | FIXTURE, RESTAIN - HPCS VSV'S HALF RING | 1 | |
| 18C1508 | FIXTURE, HOLDING - NO. 1 BEARING AFT INNER RACE | 1 | |
| 18C1516 | FIXTURE, TORQUE - NO. 1 BEARING OUTER RACE LOCKNUT | 1 | |
| 1900896 | BEARING INSERTION FIXTURE | 1 | |
| 1C6176 | FIXTURE, MEASURING | 1 | |
| 1C6176G01 | FIXTURE, MEASURING | 1 | |
| 1C8065G01 | FIXTURE ASSEMBLY - ALIGNMENT NO. 5 AND NO. 6 BEARING | 1 | |
| 1C8183 | FIXTURE - TORQUE MEASURING - VSV ASSEMBLY | 1 | |
| 1C8412 | TORQUE MEASURING FIXTURE | 1 | |
| 1C8412G01 | FIXTURE, TORQUE MEASURING - VSV ASSEMBLY | 1 | |
| 1C9318G01 | FIXTURE, INSTALL/REMOVE - RETAINER RING LPT/MID SHAFT | 1 | |
| 1C9319G01 | FIXTURE, INSTALL/REMOVE - NO. 6 BEARING PLUG | 1 | |
| 1C9408 | FIXTURE, TORQUE MEASURING- VSV ASSEMBLY | 1 | |
| 1C9408G02 | Fixture, Torque Measuring - VSV Assembly | 1 | |
| 1C9618G01 | Fixture, Install/Remove - Retainer Ring LPT/Mid-Shaft | 1 | |
| 1P01194896 | MEASURING FIXTURE | 1 | |
| 1P01194897 | MEASURING FIXTURE | 1 | |
| 2-11057 | SPRING RETURN ASSEMBLY FIXTURE | 1 | |
| 2023A0000W01 | MEASURING FIXTURE | 1 | |
| 2024056-1 | BEARING PRESS FIXTURE | 1 | |
| 2024056-1PM | BEARING PRESS FIXTURE | 1 | |
| 2024064-1 | bearing Press Fixture | 1 | |
| 2024065-1 | Bearing Press Fixture | 1 | |
| 2024150-1 | Bearing Press Fixture | 1 | |
| 2024226 | Spring Comp.Fixture | 1 | |
| 2024246-3 | BEARING PRESS FIXTURE | 1 | |
| 2024272-1 | Bearing Removal Fixture | 1 | |
| 2024272-1PM | BEARING REMOVAL FIXTURE | 1 | |
| 2024488-1 | BEARING PRESS FIXTURE | 1 | |
| 2024544-1 | Bearing Removal Fixture | 1 | |
| 2024658-1 | Bearing Press Fixture | 1 | |
| 2024783-1 | Bearing Removal Fixture | 1 | |
| 2024783-1PM | BEARING REMOVAL FIXTURE | 1 | |
| 2024821-1 | FIXTURE TEST, BEARING SEAL | 1 | |
| 2025261-1 | BEARING REMOVAL FIXTURE | 1 | |
| 2025517-1 | Flyweight Bearing Fixture | 1 | |
| 204783-1 | BEARING REMOVAL FIXTURE | 1 | |
| 206R2200-10 | BEARING REMOVAL FIXTURE | 1 | |
| 2189070F1 | Bearing Press And Stake Fixture | 1 | |
| 21C7771G01 | FIXTURE, FLARING | 1 | |
| 2250A0000-01 | FIXTURE-MEASURING | 1 | |
| 2306-T003-401 | FIXTURE, INSTALLATION - SPRING | 1 | |
| 247C5145 | FIXTURE - SUPPORT & CENTERING | 1 | |
| 247C5307 | FIXTURE, INSTALL SPRING ASSEMBLY | 1 | |
| 278392 | BEARING PRESS FIXTURE | 1 | |
| 2550145 | Fixture, preset, governor spring | 2 | |
| 2550669 | Fixture Measuring | 1 | |
| 2550875 | Fixture – Leak Test, Metering Valve Sleeve Assembl | 1 | |
| 2550A0000-01 | FIXTURE,MEASURING | 1 | |
| 2558694 | ASSEMBLY FIXTURE USED DURING ASSEMBLY AND DISASSEMBLY OF THE BRAKE TIE BOLTS. | 2 | |
| 2558783 | FIXTURE BEARING CUP | 1 | |
| 2561598 | FIXTURE, METERING VALVE TRAVEL | 2 | |
| 2566535 | Metering Valve Assembly Fixture | 1 | |
| 2566810 | Metering Valve Freeze Fixture | 1 | |
| 269T9203-11 | Rigging Fixture Cyclic Stick Centering (Right) | 1 | |
| 269T9203-7 | Rigging Fixture Cyclic Stick Centering (Left) | 2 | |
| 269T9203-7P | RIGGING FIXTURE CYCLIC STICK CENTERING LEFT | 1 | |
| 270-00944 | WIRING DIAGRAM, AIR INLET TEST FIXTURE | 1 | |
| 272166-2 | BEARING PRESS FIXTURE | 1 | |
| 274164-1-1 | Bearing Press fixtu (2 IT) | 1 | |
| 285640-4 | RING HOLDER FIXTURE | 1 | |
| 287859-1 | Ring Assembly Drill Fixture | 1 | |
| 289238-1 | FIXTURE BEARING PRESS | 1 | |
| 289452-1 | FIXTURE, PNEUMATIC, TOOTH BEARING PATTERN | 1 | |
| 291866-1 | BEARING CARRIER MACHINING FIXTURE | 1 | |
| 291867-1 | BEARING CARRIER MACHINING FIXTURE | 1 | |
| 293133-1 | BEARING INSPECTION FIXTURE | 1 | |
| 293406-1 | BEARING ALIGNMENT FIXTURE ASSEMBLY | 1 | |
| 293824-1 | BORING MACHINE GEAR BOX HOLDING FIXTURE | 1 | |
| 2BOF 65-32211 | BORING FIXTURE-FRONT SPAR TERMINAL FITTING | 1 | |
| 2BOF65-32211 | BORING FIXTURE-FRONT SPAR TERMINAL FITTING | 1 | |
| 2C 14094G06 | FIXTURE, SEAL CHECK NO. 4 BEARING AND SEAL | 1 | |
| 2C14094 | FIXTURE, SEATCHECK-NO. 4B BEARING & SEAL | 1 | |
| 2C14094 REV Y | FIXTURE, SEATCHECK-NO. 4B BEARING & SEAL | 1 | |
| 2C14094G05 | FIXTURE, SEATING CHECK ‐ NO. 4B BEARING AND SEAL | 1 | |
| 2C14094G06 | FIXTURE, SEATING #4 BEARING & SEAL | 1 | |
| 2C14104G01 | FIXTURE, HANDLING-NO.4B BEARING AFT INNER RACE | 3 | |
| 2C14137G01 | TOOL - FIXTURE, ACCESSORY GEAR BOX (AGB) MATING RING INSTALL | 11 | |
| 2C14137G02 | TOOL - FIXTURE, ACCESSORY GEAR BOX (AGB) MATING RING INSTALL | 7 | |
| 2C14138 | FIXTURE, REMVL-MATING SEAL RINGS - ACCESS GEARBOX | 1 | |
| 2C14138 REV B | FIXTURE, REMOVAL-MATING SEAL RINGS - ACCESS. GEARBOX | 1 | |
| 2C14138G01 | TOOL - FIXT REM MATING SEAL RINGS | 11 | |
| 2C14138G02 | TOOL - FIXT REM MATING SEAL RINGS | 12 | |
| 2C14649 | FIXTURE,MOTORING-CORE ENGINE | 1 | |
| 2C14649G07 | FIXTURE,MOTORING-CORE ENGINE | 1 | |
| 2C14649P02 | FIXTURE,MOTORING-CORE ENGINE | 1 | |
| 2C14649P04 | FIXTURE,MOTORING-CORE ENGINE | 1 | |
| 2C14649P06 | FIXTURE, MOTORING - CORE ENGINE (MOTORING FIXTURE) | 1 | |
| 2C14649P07 | FIXTURE MOTORING | 1 | |
| 2C14789P01 | CONCENTRICITY FIXTURE NO. 3 BEARING HOUSING | 1 | |
| 2C14789P02 | ARBOR, CONCENTRICITY FIXTURE - NO. 3 BEARING HOUSING | 1 | |
| 2C14790 | FIXTURE, RUNOUT - NO. 3 BEARING/SEALS | 1 | |
| 2C14790 REV C | FIXTURE, RUNOUT - NO. 3 BEARING/SEALS | 1 | |
| 2C14790G01 | FIXTURE, RUNOUT - NO. 3 BEARING SEALS | 2 | |
| 2C14846G01 | CENTERING FIXTURE - CVT REMOVAL/INSTALLATION | 1 | |
| 2C14858G01 | FIXTURE,INTALL,-HPC BUMPER BEARING | 1 | |
| 2C14871 | FIXTURE, MANIFOLD - N°1 BEARING | 1 | |
| 2C14871G01 | FIXTURE, INSTALL \ REMOVE-MANIFOLD NO 1 BEARING | 6 | |
| 2C14871G02 | FIXTURE,INSTALL/REMOVE-MANIFOLD N°1 BEARING | 2 | |
| 2C14871G03 | Fixture, Installation/Removal - Manifold No. 1 Bearing | 1 | |
| 2C18118 | 4R BEARING STATIONARY AIR/OIL SEAL GAGE FIXTURE | 1 | |
| 2C4094 | FIXTURE, SEATCHECK- NO 4B BEARING AND SEAL | 1 | |
| 2C5263G01 | FIXTURE - #1 & #2 BEARING HOUSING | 1 | |
| 2C6084G04 | NO.5 BEARING SPANNER NUT FIXTURE (LONG) BRAND (GE) | 1 | |
| 2C6090G03 | FIXTURE- INST/RML RETAINING RING FAN S | 1 | |
| 2C6356 | FIXTURE, INSTALL - NO.4 BALL BEARING | 1 | |
| 2C6860P22 | MASTER FIXTURE RING | 1 | |
| 2C6895G01 | FIXTURE, RUNOUT NO.1 AND NO.2 BEARING HOUSING. | 1 | |
| 2C6912G04 | FIXTURE, TORQUE MEASURING | 1 | |
| 2C6998G05 | FIXTURE SET REMOVAL MATING SEAL RINGS-ACCESORY GEARBOX | 2 | |
| 2C7098 | FIXTURE,MACHINE-NO.4 BEARING S | 1 | |
| 2C7098G01 | FIXTURE,MACHINE-NO.4 BEARING S | 1 | |
| 2C7146 | FIXTURE,HOLDING-NO.4R BEARING | 1 | |
| 2C7146G01 | FIXTURE,HOLDING-NO.4R BEARING | 1 | |
| 2C7147G02 | FIXTURE, HOLDING, ROT AIR SEAL, NO. 4 BEARING | 1 | |
| 2C7147P02 | FIXTURE, HOLDING, ROT AIR SEAL, NO. 4 BEARING | 1 | |
| 2C7154 | FIXTURE,WELD,SPOT-NO.4 BEARING | 1 | |
| 2C7154G01 | FIXTURE,WELD,SPOT-NO.4 BEARING | 1 | |
| 2C7224 | FIXTURE,REPAIR-ACTUATION RING | 1 | |
| 2C7224G01 | FIXTURE,REPAIR-ACTUATION RING | 1 | |
| 2C8008 | FIXTURE, REMOVAL - FAN STATOR FAIRING | 1 | |
| 2C8008 REV A | FIXTURE, REMOVAL - FAIRING, FAN STATOR | 1 | |
| 2C8008G01 | Fixture, Remove - Fan Stator Fairing | 4 | |
| 2C8008G01TK | FIXTURE, REMOVAL-FAIRING, FAN STATOR | 1 | |
| 2C80417G01 | FIXTURE, SPREADER - RETAINING RING | 1 | |
| 2C80417G04 | FIXTURE, SPREADER - RETAINING RING | 1 | |
| 2C81012G01 | FIXTURE, INSTALL SPIRAL RING | 1 | |
| 2C81013G01 | FIXTURE, AFT COUPLING NUT DRIVE SHAFT SPIRAL RING INSTALLATION (SPIRAL RING FIXTURE) | 1 | |
| 2C81016G01 | FIXTURE, INSTALL, SPIRAL RING | 1 | |
| 2C8102G02 | FIXTURE,TORQ-MEASURING,VSV ASSY | 1 | |
| 2C81457G02 | FIXTURE SPREADER - RETAINING RING | 1 | |
| 2C81461G01 | FIXTURE, INSTALL - RETAINING RING | 1 | |
| 2C81543G01 | FIXTURE, SHROUD RING N0 3 | 1 | |
| 2C81591G01 | FIXTURE, SHROUD RING N0 3 POST SB 72-0138 | 1 | |
| 2C81668G01 | FIXTURE, REMOVAL, BEARING, AXI | 1 | |
| 2C81945 | FIXTURE - INSTALL RING - MATING AXIS B | 1 | |
| 2C81945G01 | FIXTURE - INSTALL RING - MATING AXIS B | 2 | |
| 2C91075G01 | FIXTURE - #3 BEARING O/R | 1 | |
| 2C91078 | FIXT.#3 BEARING INNER RACE DC | 1 | |
| 2C91078G01 | FIXTURE - #3 BEARING I/R | 1 | |
| 2C91175G01 | FIXTURE-REMOVAL PTO BEARING | 1 | |
| 2C91381 | FIXTURE,INST.SNAP RING TRANS T | 1 | |
| 2C91424G01 | FIXTURE - RETAINING RING | 1 | |
| 2CF65B80511 | FIXTURE - SPRING REMOVAL AND INSTALLATION, FORCE LIMITER, LATERAL CONTROL INPUT BUS | 1 | |
| 3-506-01 | SPRING TEST AND BALANCE FIXTURE | 1 | |
| 3004A0000-01 | FIXTURE,MEASURING | 1 | |
| 3057A0000-01 | MEASURING FIXTURE | 1 | |
| 3176-4 | BEARING ASSEMBLING PRESS-IN FIXTURE | 1 | |
| 330A93-2024-20 | BLOCK,BEARING FIXTURE | 1 | |
| 330A93-3412-00 | TOOL, BALL BEARING CAGE FIXTURE | 1 | |
| 330A93341200 | TOOL,BALL BEARING CAGE FIXTURE | 1 | |
| 35009-0-2000 | Bearing Press Fixture | 1 | |
| 362395TF1 | Test Fixture - Bearing Free Play | 1 | |
| 3727088-1 | SHAFT CENTURING FIXTURE | 1 | |
| 3727377-1 | FIXTURE, CONNECTOR WIRING | 1 | |
| 383900TF1 | TEST FIXTURE ( STEERING VALVE ) | 1 | |
| 383930TF1 | TEST FIXTURE (STEERING VALVE) | 1 | |
| 39626-810 | BORDERING FIXTURE | 1 | |
| 3C4334P01 | #4 BEARING SEATING FIXTURE | 1 | |
| 3J12773 | Fixture, curing-nose cone assy | 1 | |
| 3TSJ65B01503-1 | TEST FIXTURE - ACTUATOR ASSEMBLY, NOSE LANDING GEAR STEERING | 1 | |
| 4164003-8 | ROTOR BEARING DISASSEMBLY FIXTURE (2 IT) | 1 | |
| 42-27-04-019 | FIXTURE FOR CALIBRATING THE LEAF SPRINGS INDIVIDUALLY | 1 | |
| 42315-60-221 | SPRING COMPRESSION FIXTURE | 1 | |
| 43100-20-2002-X | BEARING ASSEMBLY FIXTURE | 1 | |
| 473015 | REPLACEMENT HOSES TOOL NO. 473015 THIS KIT CONTAINS ALL HYDRAULIC SEALS CAPABLE OF REBUILDING ONE HYDRAULIC JACK OF THE AA293268 CYLINDER HEAD/MAIN BEARING HYDRAULIC FIXTURE. | 1 | |
| 4MIT65B82591 | TORQUE FIXTURE - PISTON, STEERING ACTUATOR, NOSE LANDING GEAR | 1 | |
| 50264 | SPRING ADJUSTMENT FIXTURE | 1 | |
| 5006122 | BEARING - THRUST FIXTURE (5 ITEMS) | 1 | |
| 52426A0000 | MEASURING FIXTURE | 1 | |
| 52426A0000-01 | Measuring Fixture | 1 | |
| 52485A0000 | TORQUE MEASURING FIXTURE | 1 | |
| 52485A0000-01 | TORQUE MEASURING FIXTURE | 1 | |
| 52485A0000-02 | TORQUE MEASURING FIXTURE | 1 | |
| 52485A0000-02A | ANGLE MEASURING FIXTURE | 1 | |
| 52485A0000-02T | TORQUE MEASURING FIXTURE | 1 | |
| 53042A0000-02 | ANGLE MEASURING FIXTURE | 1 | |
| 55469S0000 | BORDERING FIXTURE | 1 | |
| 55535S0000 | MEASURING FIXTURE | 1 | |
| 558-1-30102 | FIXTURE-WIRING | 1 | |
| 558-2-16306 | FIXTURE-SHIM,MEASURING | 1 | |
| 55852S0000 | MEASURING FIXTURE | 1 | |
| 55855S0000 | BACKLASH MEASURING FIXTURE | 1 | |
| 56193T4 | SPRING SEAT ASSEMBLY FIXTURE | 1 | |
| 56295S0000 | MEASURING FIXTURE | 1 | |
| 56469S0000 | BORDERING FIXTURE | 1 | |
| 56714S0000 | Measuring Fixture | 2 | |
| 56719S0000 | MEASURING FIXTURE | 2 | |
| 56719S0001 | FIXTURE RING | 1 | |
| 56719S0002 | Fixture Spring | 1 | |
| 56863A0000-01 | MEASURING FIXTURE | 2 | |
| 56864A0000-01 | Measuring Fixture | 2 | |
| 56865A0000-01 | Measuring Fixture | 2 | |
| 56951A0000-01 | ASSEMBLY MEASURING FIXTURE | 1 | |
| 570-3877-02 | BEARING ALIGNMENT FIXTURE | 1 | |
| 570-3983-02 | BEARING ALIGNMENT AND PRELOAD FIXTURE | 1 | |
| 57010A0000-01 | MEASURING FIXTURE | 1 | |
| 57811A0000-01 | END PLAY MEASURING FIXTURE | 1 | |
| 58048A0000-01 | MEASURING FIXTURE | 1 | |
| 58089A0000-01 | Measuring Fixture | 1 | |
| 5815A0000-01 | FIXTURE, RETAINING RING INSTALLATION | 1 | |
| 5838151-1 | FIXTURE, BEARING MEASUREMENT | 2 | |
| 58594A0000-01 | Measuring Fixture | 1 | |
| 59132A0000-01 | SPRING CLAMPING FIXTURE | 1 | |
| 59134A0000-01 | MEASURING FIXTURE | 1 | |
| 59610A0000-01 | MEASURING FIXTURE | 1 | |
| 5MIT65B01503 | TORQUE FIXTURE - STEERING ACTUATOR PISTON, NOSE LANDING GEAR | 2 | |
| 615000AF2 | Assembly Fixture, Spring | 1 | |
| 617-4431-001 | BEARING PREOLAD FIXTURE | 1 | |
| 62100-3700 | Soldering Fixture | 1 | |
| 65-44761-F12 | Bearing Assembly Fixture | 1 | |
| 65885T2 | Bearing Installation Holding Fixture | 1 | |
| 65885T3 | Bearing Removal Holding Fixture | 1 | |
| 831630 | Fixture, Flush, No. 2 Bearing Seal Retainer | 1 | |
| 833207 | FIXTURE BEARING INSTALLATION | 1 | |
| 834587 | FIXTURE INSTALLER BEARING | 2 | |
| 834731 | Centering Fixture, 1st and 2nd Stage Impeller Axial Tip Clearance | 1 | |
| 6037500 | DRIBBLE FLOW TEST FIXTURE USED ON THE LARGE NOZZLE METERING TIPS FOR DRIBBLE FLOW TEST. | 1 | |
| 6037501 | DRIBBLE FLOW TEST FIXTURE USED ON THE SMALL NOZZLE METERING TIPS FOR DRIBBLE FLOW. | 1 | |
| 6795872 | Fly Weight Snap Ring Removal Fixture | 4 | |
| 6796345 | FIXTURE - BORING, PINION GEAR BUSHING | 2 | |
| 6796436 | FIXTURE - BORING | 1 | |
| 6796609 | GAGE ,SETTING,COMPRESSOR CASE BORING FIXTURE | 1 | |
| 6796945 | FIXTURE – INSPECTION, OUT OF ROUD BEARING OUTER RING | 1 | |
| 6796964 | FIXTURE – CHECK, BEARING INTERNAL CLEARANCE | 1 | |
| 6799628 | Fixture-Measuring, Thermocouple | 3 | |
| 6799650 | FIXTURE – WELD, TURBINE REAR BEARING SUPPORT | 2 | |
| 6803035 | TURNING FIXTURE, COVER HOLDS COVER DURING CUTOFF SURFACE REPAIR PROCEDURE. | 1 | |
| 6833108 | PURGE FIXTURE, ARGON, INLET COVER (NOT ILLUS- CONNECTS ARGON SUPPLY TO NOZZLE TRATED) INLET DURING COVER WELD PROCEDURE. | 1 | |
| 6872504 | FIXTURE - AIR FLOW MEASURING 1ST STAGE | 1 | |
| 6872505 | FIXTURE - AIR FLOW MEASURING 3RD STAGE | 1 | |
| 6872781 | FIXTURE - ALIGNMENT, BEARING BORE | 1 | |
| 6877001 | TACK WELD FIXTURE, COVER HOLDS FUEL NOZZLE COMPONENTS IN POSITION DURING INLET COVER TACK WELD PROCEDURE. | 1 | |
| 6877004 | STEM STRAIGHTENING FIXTURE HOLDS FUEL NOZZLE WHILE ADJUSTING METERING TIP POSITION. | 1 | |
| 6877005 | HOLDING FIXTURE, VALVE END HOLDS FUEL NOZZLE DURING CUTTING, MACHINING, AND WELDING OF VALVE END COMPONENTS. | 1 | |
| 6877006 | HOLDING FIXTURE, CHECK VALVE PLUG HOLDS FUEL NOZZLE DURING MACHINING OF CHECK VALVE PLUG WELD. | 1 | |
| 6877010 | HOLDING FIXTURE, TIP END HOLDS FUEL NOZZLE DURING CUTTING, MACHINING, AND WELDING OF TIP END COMPONENTS. | 1 | |
| 6877011 | HOLDING FIXTURE, FINAL TEST HOLDS FUEL NOZZLE/COMPONENTS ON SPRAY CHAMBER DURING ASSEMBLY AND TESTING. | 1 | |
| 6877012 | HOLDING FIXTURE, PRESSURE TEST HOLDS FUEL NOZZLE COMPONENTS DURING TESTING AND CLEANING OPERATIONS. | 1 | |
| 6877014 | PURGE FIXTURE, AIR (CHECK VALVE REMOVAL) BACK PRESSURES FUEL NOZZLE TO BLOW CHIPS OUT OF NOZZLE DURING CHECK VALVE MACHINING OPERATION. | 1 | |
| 6877015 | PURGE FIXTURE, ARGON, PRIMARY BODY PROVIDES ARGON PURGE CONNECTION DURING PRIMARY BODY WELDING PROCEDURE. | 1 | |
| 6877016 | PURGING AND HEAT SINK FIXTURE (FOR NOZZLES PROVIDES ARGON PURGE CONNECTION WITH WEAR SLEEVES) AND DISSIPATES HEAT DURING SECONDARY BODY WELDING PROCEDURE. | 1 | |
| 6877017 | PURGING AND HEAT SINK FIXTURE (FOR NOZZLES PROVIDES ARGON PURGE CONNECTION WITHOUT WEAR SLEEVES) AND DISSIPATES HEAT DURING SECONDARY BODY WELDING PROCEDURE. | 1 | |
| 6877019 | THERMAL CLEANING FIXTURE HOLDS SUPPORTS DURING PYROLYTIC CLEANING. | 1 | |
| 6877021 | SEAL FIXTURE, SECONDARY ORIFICE (WITH INLET SIMULTANEOUSLY CONNECTS METERING AND EXIT HOSE) TIP AND INLET OF FUEL NOZZLE ASSEMBLY TO PRESSURE SOURCE FOR PROOF TESTING. | 1 | |
| 6877022 | IN-PROCESS INSPECTION FIXTURE USED TO MEASURE CRITICAL DIMENSIONS DURING DISASSEMBLY AND REPAIR OPERATIONS. | 1 | |
| 6877024 | TACK WELD FIXTURE, PRIMARY AND SECONDARY HOLDS SUPPORT AND METERING SET BODY COMPONENTS IN POSITION DURING TACK WELD OPERATIONS. | 1 | |
| 6877025 | SEAL RING ADAPTER FIXTURE VALVE END | 1 | |
| 6877028 | STEM HOLDING FIXTURE HOLDS WEAR SLEEVE AND FUEL NOZZLE IN POSITION DURING TACK WELD OPERATION. | 1 | |
| 6877030 | DRILL FIXTURE, FLANGE PIN HOLDS SUPPORT DURING DRILLING OF FLANGE PINHOLE TO ENSURE CORRECT LOCATION. | 1 | |
| 6887819 | Fixture â Checking, Gas Producer and Power Turbine Supports Bearing Bores | 2 | |
| 6893384 | FIXTURE - ALIGNMENT, BEARING BORE | 1 | |
| 6897006 | PRESSURE TEST FIXTURE, INLET COVER HOLDS INLET COVER IN POSITION DURING WELD REPAIR PRESSURE TEST. | 1 | |
| 6897101 | TEST FIXTURE, INLET PLUG PROVIDES SEPARATE PRIMARY AND SECONDARY INLET FLUID CONNECTIONS DURING SUPPORT TESTING. | 1 | |
| 6897102 | PRIMARY SUPPORT RING FIXTURE | 1 | |
| 6897103 | HOLDING FIXTURE, TIP SEAL HOLDS METERING SET SEAL FIXTURES ON FUEL NOZZLE FOR PRESSURE TESTING. | 1 | |
| 6897104 | SEAL FIXTURE, PRIMARY ORIFICE PLUGS PRIMARY ORIFICE DURING PAST WELD PRESSURE TEST, NO SECONDARY PRESENT. | 1 | |
| 6897106 | PRE QUALIFYING FIXTURE, CARTRIDGE VALVE HOLDS CARTRIDGE VALVE DURING PRE QUALIFYING TESTING. | 1 | |
| 6897107 | PRE QUALIFYING FIXTURE, CHECK VALVE HOLDS CHECK VALVE DURING TESTING. | 1 | |
| 6899966 | FIXTURE- FUEL NOZZLESHIMMEASURING | 2 | |
| 6977602 | FLOW DIVIDER VALVE PREQUAL FIXTURE HOLDS CARTRIDGE VALVE DURING PREQUALIFYING TESTING. | 1 | |
| 7001276 | WIRING DIAGRAM, AIR INLET, TEST FIXTURE APS5000 | 1 | |
| 23033031 | FIXTURE--HOLDING, FRONT BEARING HOUSING 7 | 1 | |
| 23058405 | Fixture – Arbor Press, Separate Damper From No. 5 Bearing | 1 | |
| 23058483 | Fixture – Alignment, 2nd Stage Vane Ring To Case | 1 | |
| 697505663 | SPRING DISC FIXTURE | 1 | |
| 520E801055 | MEASURING FIXTURE LH (BAE) | 1 | |
| 520E801056 | MEASURING FIXTURE RH (BAE) | 1 | |
| 7-363300003 | GUN STOW SPRING COMPRESSOR FIXTURE | 1 | |
| 7C2205 | FIXTURE, HEATER-NO 4 BEARING | 1 | |
| 7K800256D004 | MLG BORING FIXTURE | 1 | |
| 7K800256D044 | MLG BORING FIXTURE | 1 | |
| 80A3722305K1TK | Piston Ring Insp. Restraining Fixture | 1 | |
| 8111A | CONNECTING ROD BORING & ALIGNMENT FIXTURE | 1 | |
| 82202-20506 | TORQUE MEASURING TOOL-SWIVEL CONTROL FIXTURE | 1 | |
| 831132-1 | Bearing Press Fixture Split Plate | 1 | |
| 833102-1 | COMPRESSOR CENTERING FIXTURE | 1 | |
| 833126-1 | BEARING ASSEMBLY FIXTURE | 1 | |
| 833129-1 | BEARING AND GEAR REMOVAL FIXTURE | 1 | |
| 833201-1 | FIXTURE BEARING PRESSING | 1 | |
| 833202-1 | SET FIXTURE BEARING PRESSING | 1 | |
| 833207-1 | FIXTURE-BEARING INSTALLATION | 2 | |
| 833207-1PM | FIXTURE-BEARING INSTALLATION | 1 | |
| 833283-1 | Bearing Preload check fixture | 1 | |
| 833283-1PM | BEARING PRELOAD CHECK FIXTURE | 1 | |
| 833296-1 | Diaphragm Curing Fixture | 1 | |
| 833437-1 | FIXTURE, BEARING PRESS | 1 | |
| 833438-2 | FIXTURE BEARING PRESS | 1 | |
| 833472-1 | FIXTURE BEARING REMOVAL | 1 | |
| 833545-1 | FIXTURE BEARING REMOVAL | 1 | |
| 833916-1 | FIXTURE REMOVAL BEARING AND SPACER | 1 | |
| 833916-2 | BEARING & SPACER REMOVAL FIXTURE | 1 | |
| 834213-1 | Spring Compressor Fixture | 1 | |
| 834223-1 | SPRING COMPRESSION FIXTURE | 1 | |
| 834223-1PM | SPRING COMPRESSION FIXTURE | 1 | |
| 834223-2 | SPRING COMPRESSION FIXTURE | 1 | |
| 834223-2PM | SPRING COMPRESSION FIXTURE | 1 | |
| 834236-1 | Bearing Check Fixture | 1 | |
| 834236-1PM | BEARING CHECK FIXTURE | 1 | |
| 834236-2 | BEARING CHECK FIXTURE | 1 | |
| 834239-1 | BUTTERFLY CENTERING FIXTURE | 1 | |
| 834269-1 | Bearing Installer Fixture | 1 | |
| 834331-1 | Bearing Removal Fixture | 1 | |
| 834341-1 | Bearing Indicator Fixture | 1 | |
| 834341-1PM | BEARING INDICATOR FIXTURE | 1 | |
| 834437-1 | SPRING INSTALLATION FIXTURE | 1 | |
| 834447-1 | SEAL REMOVAL FIXTURE (SUPPORTS 3810187-2 BEARING INLET HOUSING ASSEMBLY DURING REMOVAL OF 3611175-1 | 1 | |
| 834541-1 | THRUST BEARING END PLAY MEASURING FIXTURE | 2 | |
| 834587-1 | FIXTURE INSTALLER BEARING | 1 | |
| 834695-1 | Bearing Installer Fixture | 1 | |
| 834731-1 | CENTERING FIXTURE , 1ST & 2ND STAGE IMP | 1 | |
| 834731-2 | CENTERING FIXTURE | 1 | |
| 835689-1 | BEARING PRESS FIXTURE | 1 | |
| 835700-1 | BEARING PRESS FIXTURE | 1 | |
| 835701-1 | BEARING PRESS FIXTURE | 1 | |
| 835703-1 | BEARING PRESS FIXTURE | 1 | |
| 835869-1 | Bearing Press Fixture | 1 | |
| 856A 2377G01 | FIXTURE CENTERING & HANDELING ROTATIONAL SEAL | 1 | |
| 856A 2758G02 | FIXTURE CENTERING LPT. SHAFT | 6 | |
| 856A 2826G03 | FIXTURE HOLDING NO.4 BEARING | 2 | |
| 856A 3358G03 | FIXTURE HOLDING NO.4BEARINGINNER RACE BOLT | 2 | |
| 856A1035 | FIXTURE, HOLDING - NO. 3 BEARING IGB RETAINER NUT | 1 | |
| 856A1035G01 | FIXTURE, HOLDING - NO. 3 BEARING IGB RETAINER NUT | 9 | |
| 856A1038 | FIXT., BEARINGS & | 1 | |
| 856A1038 G01 | Fixture Installation ‐ IGB Bearing & Spacer | 9 | |
| 856A1038G01 | Fixture, Installation - IGB Bearing and Spacer (installation fixture) | 9 | |
| 856A1040 | FIXTURE, REMOVAL - IGB BEARING AND SPACER | 1 | |
| 856A1040 G01 | Fixture Removal ‐ IGB Bearing and Spacer | 8 | |
| 856A1040G01 | Fixture, Removal - IGB Bearing and Spacer (removal fixture) | 8 | |
| 856A1041G | CENTERING FIXTURE | 1 | |
| 856A1041G04 | FIXT CENTERING-HPTR | 1 | |
| 856A1111 G01 | No.4 Bearing Outer Race Fixture | 3 | |
| 856A1111G01 | NO.4 BEARING OUTER RACE FIXTURE | 3 | |
| 856A1143 | FIXTURE, INSTALLATION - LP NOZZLE RETAINING RING | 1 | |
| 856A1143G02 | Fixture, Installation - LP Nozzle Retaining Ring (installation fixture) | 8 | |
| 856A1171G05 | FIXTURE, PRESSURE TEST - SEAL, STATIONARY, NO. 3 BEARING AFT (PRESSURE TEST FIXTURE) | 1 | |
| 856A1171G06 | FIXTURE, PRESSURE TEST - SEAL, STATIONARY, NO. 3 BEARING AFT (PRESSURE TEST FIXTURE) | 2 | |
| 856A1211G01 | Fixture, Clamping - No. 3 Bearing Assembly, Inlet Gearbox (clamping fixture) | 9 | |
| 856A1356G02 | INSTALLATION N4 BEARING FIXTURE | 5 | |
| 856A1358G02 | CENTERING FIXTURE | 7 | |
| 856A1383G01 | Fixture, Centering-HPTRS to Comb | 1 | |
| 856A1389G01 | FIXTURE, INSTALL - NO. 4 BEARING OUTER RACE | 8 | |
| 856A1408G05 | FIXTURE, RESTRAINING - HPT ROTOR FRONT RETAINING RING | 1 | |
| 856A1411G04 | Fixture Ring Comp | 4 | |
| 856A1426 | FIXTURE, TORQUE - NO. 4 BEARING RETAINER (TORQUE FIXTURE) | 1 | |
| 856A1426G01 | FIXTURE, TORQUE - NO. 4 BEARING RETAINER (TORQUE FIXTURE) | 4 | |
| 856A1426G02 | Fixture Torque #4 Bearing | 1 | |
| 856A1426G03 | Fixture Torque #4 Bearing | 2 | |
| 856A1430G02 | IGB HOLDING FIXTURE - BEARING REMOVAL | 7 | |
| 856A1431G03 | FIIXTURE, RESTRAINING-HPT NOZZLE ASSEMB(THE RESTRAIN FIXTURE IS USED TO RESTRAIN THE NOZZLE SEGMENTS OF THE HP TURBINE NOZZLE ASSEMBLY CIRCUMFERENTIALLY DURING THE INSTALLATION OR REMOVAL FROM THE COMPRESSOR REAR FRAME (CRF) | 7 | |
| 856A1478 | FIXTURE, REMOVAL - NO. 3 BEARING AFT STATIONARY SEAL (REMOVAL FIXTURE) | 1 | |
| 856A1478G02 | Fixture Puller #3 Bearing | 1 | |
| 856A1495G01 | Fixture Inspect #3 Bearing | 1 | |
| 856A1602G01 | FIXTURE, CHILL - HPT ROTOR BLADE AFT BLADE RETAINER (CHILL FIXTURE) THE CHILL FIXTURE IS USED TO HOLD DRY ICE AGAINST THE AFT HPT ROTOR DISK BLADE RETAINER, DURING DISASSEMBLY, TO RELEASE THE INTERFERENCE FIT BETWEEN THE RETAINER AND THE HPT DISK | 6 | |
| 856A1826 | FIXTURE, REMOVAL - NO. 3 BEARING AFT STATIONARY SEAL (REMOVAL FIXTURE) | 1 | |
| 856A1826G01 | FIXTURE, REMOVAL - NO. 3 BEARING AFT STATIONARY SEAL (REMOVAL FIXTURE) | 3 | |
| 856A1828 | FIXTURE, TORQUE NO. 4 BEARING RETAINER (TORQUE FIXTURE) | 1 | |
| 856A1828G01 | Torque Fixture No4 Bearing | 1 | |
| 856A1828G03 | Fixture, Torque No. 4 Bearing Retainer (torque fixture) | 6 | |
| 856A1865G01 | FIXTUE. TORQUE - NO. 3 BEARING LOCK NUT (TORQUE FIXTURE) | 3 | |
| 856A1865G03 | Fixture, Torque-N03 Bearing - this replaces 856A1000G09 | 1 | |
| 856A1865G04 | Fixture, Torque - No. 3 Bearing Lock Nut (torque fixture) | 5 | |
| 856A211 | FIXTURE, CENTERING LPT SHAFT MODULE | 1 | |
| 856A211 REV B | FIXTURE, CENTERING LPT SHAFT MODULE | 1 | |
| 856A2340G01 | FIXTURE, TORQUE/LOOSEN - NO. 1 BEARING NUT | 3 | |
| 856A2341G03 | FIXTURE, PULLER/PRESS - NO. 2 ROLLER BEARING OUTER RACE | 1 | |
| 856A2377G01 | FIXTURE CENTERING & HANDELING ROTATIONAL SEAL | 1 | |
| 856A2543 | CENTERING FIXTURE - LPT SHAFT MODULE | 2 | |
| 856A2543 G02 | Fixture Centering ‐ LPT Shaft Module | 7 | |
| 856A2543G02 | CENTERING FIXTURE - LPT SHAFT | 7 | |
| 856A2677 | FIXTURE, I/R - REMOVABLE RETAINING RING | 2 | |
| 856A2677G01 | FIXTURE, I/R -0 REMOVABLE RETAINING RING | 21 | |
| 856A2677G01 | FIXTURE INST AND REM RETAINING RING | 21 | |
| 856A2690 | FIXTURE ALIGNMENT NO1 AND NO2 BEARING MODULE | 1 | |
| 856A2690G01 | FIXTURE ALIGNMENT NO1 AND NO2 BEARING MODULE | 4 | |
| 856A2693G03 | HOLDING FIXTURE - N°4 BEARING INNER | 1 | |
| 856A2711 | FIXTURE, CENTERING LPT SHAFT MODULE;G01 | 1 | |
| 856A2711G01 | CENTERING FIXTURE - LPT SHAFT | 11 | |
| 856A2711G03 | CENTERING FIXTURE - LPT SHAFT | 1 | |
| 856A2716G01 | LPT SHAFT CENTRING FIXTURE | 3 | |
| 856A2723G03 | FIXTIJE. MCHINING, SLEEVE,ADJUSTING - NO. 5 BEARING (MACHINING FIXTURE) | 1 | |
| 856A2723G04 | FIXTURE, MACHINING - SLEEVE NO. 5 BEARING | 1 | |
| 856A2757G01 | FIXTURE, CENTERING LPT SHAFT MODULE | 3 | |
| 856A2758 | FIXTURE, CENTERING - LPT SHAFT TO LPT (CENTERING FIXTURE) | 1 | |
| 856A2758G01 | FIXTURE, CENTERING - LPT SHAFT TO LPT (CENTERING FIXTURE) | 1 | |
| 856A2758G02 | FIXTURE, CENTERING - LPT SHAFT TO LPT (CENTERING FIXTURE) | 6 | |
| 856A2758G02 | FIXTURE CENTERING LPT SHAFT TO LPT | 6 | |
| 856A2798 | LOCKING FIXTURE AND SOCKET - AGB 31/71-TOOTH GEARSHAFT BALL BEARING NUT LOCKING (FIXTURE AND SOCKET) | 1 | |
| 856A2798G01 | LOCKING FIXTURE AND SOCKET- AGB 31/71-TOOTH GEARSHAFT BALL BEARING NUT | 5 | |
| 856A2822 | FIXT TORQUE - NO4 BEARING RETAINER | 1 | |
| 856A2822G01 | FIXTURE TORQUE NO4 BEARING RETAINER | 1 | |
| 856A2822G02 | FIXT TORQUE - No4 BEARING RETAINER | 2 | |
| 856A2822G03 | FIXT TORQUE - No4 BEARING RETAINER | 4 | |
| 856A2826 | HOLDING FIXTURE NO.4 BEARING | 1 | |
| 856A2826G01 | FIXTURE, HOLDING - NO. 4 BEARING INNER RACE BOLTS (HOLDING FIXTURE) | 1 | |
| 856A2826G02 | HOLDING FIXTURE - N°4 BEARING INNER | 1 | |
| 856A2826G03 | HOLDING FIXTURE - N4 BEARING INNER | 2 | |
| 856A2922 | FIXTURE, TORQUE/LOOSEN - NO. 1 BEARING NUT (TORQUE/LOOSEN FIXTURE) | 1 | |
| 856A2922G01 | FIXTURE, TORQUE/LOOSEN - NO. 1 BEARING NUT (TORQUE/ LOOSEN FIXTURE) | 5 | |
| 856A2924G01 | FIXTURE, CHECKING DIM. V - NO. 1 AND NO. 2 BEARING SUPPORT | 4 | |
| 856A2941G01 | FIXTURE, CENTERING | 5 | |
| 856A2950 | FIXTURE, CENTERING | 1 | |
| 856A2950G0 | FIXTURE, CENTERING - LPT SHAFT MODULE | 1 | |
| 856A2950G01 | CENTERING FIXTURE - LPT SHAFT | 10 | |
| 856A3017 G01 | Fixture Torque‐No. 1 Bearing Housing | 1 | |
| 856A3017 G05 | Fixture Torque‐No. 1 Bearing Housing | 8 | |
| 856A3017G05 | FIXTURE TORQUE-NO.1 BEARING | 8 | |
| 856A3030G02 | FIXTURE, TORQUE - NO. 1 BEARING HOUSING | 5 | |
| 856A3265G03 | FIXTURE, MACHINING - SLEEVE, NO. 5 BEARING OUTER RACE | 2 | |
| 856A3265G04 | MACHING FIXTURE FOR OIL DAMPER NO.5 BEARING | 4 | |
| 856A3358 | FIXTURE, HOLDING - NO. 4 BEARING INNER RACE BOLTS | 1 | |
| 856A3358G03 | FIXTURE, HOLDING - NO. 4 BEARING INNER RACE BOLTS(HOLDING FIXTURE)OBSELETE REPLACED BY 856A3358G04 THEN 856A3358G05 | 2 | |
| 856A3358G04 | FIXTURE, HOLDING - NO. 4 BEARING INNER RACE BOLTS | 2 | |
| 856A3358G05 | Fixture, Holding - No. 4 Bearing Inner Race Bolts (holding fixture) | 4 | |
| 856A3487G02 | FIXTURE # BALL BEAR.4 THE TOOL IS USED TO PROTECT THE NO. 4 BALL BEARING | 4 | |
| 856A3711G03 | FIXTURE, HANDLING - FAN FRAME OUTER RING (HANDLING FIXTURE) | 2 | |
| 856A3722 | FIXTURE, INSTALLATION - NO. 1 BEARING SUPPORT (INSTALLATION FIXTURE) | 1 | |
| 856A3722G01 | Fixture Install #1-2 Bearing Support | 1 | |
| 856A3722G02 | FIXTURE, INSTALLATION - NO. 1 BEARING SUPPORT (INSTALLATION FIXTURE) | 1 | |
| 856A3722G04 | Fixture, Installation - No. 1 Bearing Support (installation fixture) | 8 | |
| 856A3738 | FIXTURE, TORQUE / LOOSEN NO 1 BEARING NUT. | 1 | |
| 856A3738G01 | Fixture Torque Loosen NB 1 Bearing Nut | 9 | |
| 856A3738G01 | FIXTURE, TORQUE / LOOSEN - #1 BEARING NUT | 9 | |
| 856A3739G01 | Fixture Install Oil Nozzle Bearing 2 | 1 | |
| 856A3739G02 | Fixture, Installation - No. 2 Bearing Oil Nozzle (installation fixture) | 3 | |
| 856A3750 | FIXTURE, CENTERING LPT SHAFT MODULE | 1 | |
| 856A3750G01 | FIXTURE, CENTERING LPT SHAFT MODULE | 2 | |
| 856A3750G02 | Centering Fixture | 13 | |
| 856A3750G04 | FIXTURE, CENTERING LPT SHAFT MODULE | 1 | |
| 856A3783 | FIXTURE CHECKING, NO 1 & NO 2 BEARING SUPPORT | 1 | |
| 856A3783G01 | Fixture, Check Dim 'V' N1&2 Bearing Support | 1 | |
| 856A3783G02 | FIXTURE CHECKING, NO 1 & NO 2 BEARING SUPPORT | 6 | |
| 856A3791 | FIXTURE, MACHINING, SLEEVE, ADJUSTING - NO. 5 BEARING (MACHINING FIXTURE) | 1 | |
| 856A3791G03 | FIXTURE, MACHINING, SLEEVE, ADJUSTING - NO. 5 BEARING (MACHINING FIXTURE) | 1 | |
| 856A3791G04 | Fixture, Machining, Sleeve, Adjusting - No. 5 Bearing | 3 | |
| 856A3792 | CENTERING FIXTURE - LPT SHAFT/LPT | 1 | |
| 856A3792G01 | CENTERING FIXTURE - LPT SHAFT/LPT | 6 | |
| 856A3913 | FIXT, CHECK ASSEMBLY TRF / 5 BEARING SUPPORT | 1 | |
| 856A3913G01 | Fixture, Checking - Assembly/TRF with No. 5 Bearing Support | 2 | |
| 856A3913G02 | FIXT, CHECK ASSEMBLY TRF / 5 BEARING SUPPORT | 1 | |
| 856A3913G03 | FIXT, CHECK ASSEMBLY TRF / 5 BEARING SUPPORT | 6 | |
| 856A3918 | FIXTURE, PULLER / PRESS NO 2 ROLLER BEARING OUTER RACE | 1 | |
| 856A3918G01 | FIXTURE, PULLER / PRESS NO 2 ROLLER BEARING OUTER RACE | 1 | |
| 856A3918G02 | FIXTURE, PULLER / PRESS NO 2 ROLLER BEARING OUTER RACE | 2 | |
| 856A3918G03 | Fixture, Puller/Press - No. 2 Roller Bearing Outer Race (puller/press fixture) | 4 | |
| 856A4026G02 | FIXTURE MACHINING NO. 3 BEARING FORWARD STATIONARY OIL SEAL | 1 | |
| 856A4065G01 | FIXTURE, THREAD REPAIR -NO. 3 BEARING LOCKNUT | 1 | |
| 856A4072G02 | FIXT.WELD-AFT SUPPORT RING | 1 | |
| 856A4240G02 | FIXTURE, TURNING – COMBUSTOR LUG RING | 1 | |
| 856A4624 | SCOURING FIXTURE - FAN FRAME STRIP | 1 | |
| 856A4624G02 | SCOURING FIXTURE - FAN FRAME STRIP | 1 | |
| 856A4624G03 | SCOURING FIXTURE - FAN FRAME STRIP | 5 | |
| 856A5786G03 | PRETWIST ANGLE RESTORING FIXTURE - | 1 | |
| 856A6754G02 | PRETWIST RESTORING FIXTURE - LPT | 1 | |
| 856A6754G03 | PRETWIST RESTORING FIXTURE - LPT BLADES STG 1/4 | 1 | |
| 856A6754G05 | PRETWIST RESTORING FIXTURE - LPT | 1 | |
| 856A6754G06 | PRETWIST RESTORING FIXTURE - LPT | 1 | |
| 856AI040 | FIXT IGB BEARING | 1 | |
| 856А3750 | FIXTURE, CENTERING LPT SHAFT MODULE | 1 | |
| 856А3750G02 | FIXTURE, CENTERING LPT SHAFT MODULE | 1 | |
| 8574813 | Fixture – Assembly, Housing Bearing | 1 | |
| 8813824000 | SEALING RING FIXTURE | 3 | |
| 8943-0-2000 | Bearing Press Fixture | 1 | |
| 8945-0-2001-R | Bearing Removal Fixture | 1 | |
| 8951 | BEARING REMOVAL FIXTURE | 1 | |
| 8951-0-2001-R | Bearing Removal Fixture | 1 | |
| 8951/895100 | BEARING REMOVAL FIXTURE | 1 | |
| 8955-0-2000 | Bearing Press Fixture | 1 | |
| 8C2055 | FIXTURE, SPREADER-RETAINING RING, HPTR | 1 | |
| 8C2067 | FIXTURE, INSTALLATION - #4 BEARING CARBON SEAL | 1 | |
| 8C2071 | FIXTURE, REMOVAL - CARBON SEAL, NO. 4 BEARING | 1 | |
| 8C2185 | FIXTURE, HOLDING – STG 1 VSV RING | 1 | |
| 8C2188 | FIXTURE, LIFT - COMPRESSOR STATOR RINGS | 1 | |
| 8C2452 | FIXTURE, CENTERING-LPT SHAFT | 1 | |
| 8C2502 | FIXTURE, LIFT & TURN - NO. 1 BEARING SUPPORT HOUSING | 1 | |
| 8C2511 | FIXTURE, PUSHER/PULLER CARBON SEAL NO. 1 BEARING | 1 | |
| 8C2514 | FIXTURE, TEST - CARBON SEAL - NO. 1 BEARING | 1 | |
| 8C2520 | FIXTURE, REMOVE - KEYED RING, FAN SHAFT | 1 | |
| 8C2530 | FIXTURE, LIFT AND TURN NO. 2 BEARING HOUSING | 1 | |
| 8C2532 | FIXTURE, HEAT GUN - NO. 2 BEARING HOUSING | 1 | |
| 8C2535 | SEATING FIXTURE, NO. 1 BEARING, RLR, CYL, INNER RACE | 1 | |
| 8C2540 | FIXTURE, SEATING - NO. 2 BEARING INNER RACE | 1 | |
| 8C2662 | FIXTURE, MOTORING - CORE ROTOR | 1 | |
| 8C2917 | FIXTURE, ALIGNMENT TUBE NO. 1 BEARING OIL SUPPLY | 1 | |
| 905011-1 | Endplay Measuring Fixture | 1 | |
| 906080 | MEASURING DEVICE WITH HOLDING FIXTURE | 1 | |
| 907816-1-1 | THRUST-BEARING END PLAY MEASURING FIXTURE | 1 | |
| 956A1036 | FIXTURE - RESTRAINING - HOUSING - NO. 4 BEARING | 1 | |
| 956A1037 | FIXTURE - RESTRAINING - FWD ROTATING OIL SEAL NO. 4 BEARING | 1 | |
| 956A1066 | FIXTURE - INSTALL - NO. 4 BEARING OUTER RACE | 1 | |
| 956A1098 | FIXTURE - LEAKAGE TEST-CARBON SEAL - N0 4. BEARING | 1 | |
| 956A1308 | FIXTURE - TORQUE - NO. 3 BEARING | 1 | |
| 956A1511 | FIXTURE - TORQUE - LOCKNUT - 3B BEARING | 1 | |
| 956A1513 | FIXTURE - REMOVAL - PINION BEARING | 1 | |
| 956A1514 | FIXTURE - REMOVAL - OUTER RACER - 3R BEARING | 1 | |
| 956A1518 | FIXTURE - PULLER - INNER RING - NO. 3 ROLLER BRG | 1 | |
| 956A1526 | FIXTURE - LOADING BALL BEARINGS LEAP 1A/1C | 1 | |
| 956A3093 | FIXTURE - LEAKAGE TEST - CARBON SEAL - NO. 4 BEARING | 1 | |
| 956A3308 | FIXTURE - TORQUE - NO. 3 BEARING | 1 | |
| 956A3401 | FIXTURE - INSTALLATION - RETAINING RING - NO 4 BEARING SPANNER NUT | 1 | |
| 956A3532 | FIXTURE - REMOVAL - BEARING RACE | 1 | |
| 956A6006 | FIXTURE, GUIDE - NO.1-2 BEARING SUPPORT | 1 | |
| 956A6010 | FIXTURE - GUIDE - NO. 1-2 BEARING SUPPORT | 1 | |
| 956A6021 | FIXTURE, INSTALL - TGB PISTON RING | 1 | |
| 956A6021G01 | FIXTURE, REMOVE/INSTALL TGB PISTON RING | 1 | |
| 956A6027 | FIXTURE - LIFT & TURN - BEARING SUPPORT 1/2 | 1 | |
| 956A6028 | FIXTURE - LIFT VARIABLE CG - BEARING SPT 1 & 2 | 1 | |
| 956A6030 | FIXTURE - GUIDE - BEARING SPT 1-2 | 1 | |
| 956A6034 | FIXTURE - CHECK - NIPPLE LOCATION - BEARING # 2 | 1 | |
| 956A6049 | FIXTURE -CHECK LOCATION-SYSTEM ANTI ICING -FAIRING FLOW PATH | 1 | |
| 956A6089 | FIXTURE - RESTRAIN - FAIRING FLOW PATH | 1 | |
| 956A6105 | FIXTURE - INSTALL - RDE RING | 1 | |
| 956A6113 | FIXTURE - GUIDE - PADS RING | 1 | |
| 956A6215 | FIXTURE - SUPPORT - BEARING - TGB | 1 | |
| 956A6304 | FIXTURE, RESTRAIN-ROTATING SEAL BEARING 4 | 1 | |
| 956A6311 | FIXTURE - REMOVE - ROTATING SEAL BEARING 4 | 1 | |
| 956A6337G01 | FIXTURE, ASSEMBLY - LOCKING RING | 1 | |
| 956A6351 | FIXTURE - INSTALL - SLAVE - NO.5 BEARING | 1 | |
| 956A6352 | FIXTURE - LIFT - SLAVE - NO.5 BEARING | 1 | |
| 956A6358 | FIXTURE - GAUGE RING BALANCING - LPT | 1 | |
| 956A6466 | FIXTURE - DISASSY-LPT SEAL RING STAGE 2-3 | 1 | |
| 956A6483 | FIXTURE - PUSHER - LPT RING -SEAL BEARING 5 | 1 | |
| 956A6489 | FIXTURE - PULLER - LPT RING -SEAL REAR ENCLOSURE | 1 | |
| 956A6490 | FIXTURE - REMOVE - LPT - RING SEAL | 1 | |
| 956A6491 | FIXTURE - PULLER - LPT RING -SEAL BEARING 5 | 1 | |
| 956A6492 | FIXTURE - REMOVE - REARING #5 | 1 | |
| 956A6523 | FIXTURE - REMOVE - NO.5 BEARING FERRULE | 1 | |
| 956A6524 | FIXTURE - REMOVAL - NO.5 BEARING OUTER CASE | 1 | |
| 956A6525 | FIXTURE - REMOVE - NO.5 BEARING SQUEEZE FILM | 1 | |
| 956A6526 | FIXTURE - INSTALLATION AND REMOVAL - RETAINING RING | 1 | |
| 956A6535 | FIXTURE - CENTERING RING - LPT DISK 1 | 1 | |
| 956A6541 | FIXTURE - TORQUING - LOCKING NUT BEARING 5 | 1 | |
| 956A6559 | FIXTURE - HEATER - NO.5 BEARING FERRULE | 1 | |
| 956A6560 | FIXTURE - RESTRAINING - NO.5 BEARING FERRULE | 1 | |
| 956A6561 | FIXTURE - HEATER - NO.5 BEARING SQUEEZE FILM | 1 | |
| 956A6562 | FIXTURE - RESTRAINING - NO.5 BEARING SQUEEZE FILM | 1 | |
| 956A6567 | FIXTURE - PULLER - LPT - RETAINING RING 7 | 1 | |
| 956A6572 | FIXTURE - HEATER - NO.5 BEARING OUTER RACE | 1 | |
| 956A6575 | FIXTURE - RESTRAINER - SEALING RING | 1 | |
| 956A6576 | FIXTURE - RESTRAINER - NO.5 BEARING OUTER RACE | 1 | |
| 956A6581 | FIXTURE - LIFT - NO.5 BEARING SUPPORT EQUIPPED | 1 | |
| 956A6604 | FIXTURE - HEATER - REAR SEAL NO.5 BEARING | 1 | |
| 956A6617 | FIXTURE, FLOW CHECK - CARBON SEAL NO.5 BEARING | 1 | |
| 956A6619 | FIXTURE - CENTERING - CARBON SEAL NO.5 BEARING | 1 | |
| 956A6637 | FIXTURE - ASSEMBLY - LOCKING RING | 1 | |
| 956A6637G01 | LOCKING RING ASSY FIXTURE | 2 | |
| 956A6637G02 | FIXTURE, ASSEMBLY - LOCKING RING | 3 | |
| 956A6652 | FIXTURE - CENTERING - FRONT VENT TUBE | 1 | |
| 956A6803 | FIXTURE, INSTALL/REMOVE-SUPPORT BEARING 2 | 1 | |
| 956A6804 | FIXTURE FOR SUPPORT BEARING 1 ASSEMBLY WITH BEARING 1 | 1 | |
| 956A6805 | FIXTURE FOR SUPPORT BEARING 1 INSTALLATION | 1 | |
| 956A6810 | FIXTURE - LIFT AND TURN - 1 & 2 BEARING SUPPORT | 1 | |
| 956A6811 | FIXTURE, LIFTING - BEARING SUPPORT 1/2 | 1 | |
| 956A6812 | FIXTURE, CENTERING - FRONT ROTATING SEAL | 1 | |
| 956A6814 | FIXTURE, REMOVE - BEARING 2 INNER RACE | 1 | |
| 956A6816 | FIXTURE, REMOVE - BEARING 1 INNER RACE | 1 | |
| 956A6818 | FIXTURE - REMOVE - SUPPORT BEARING 2 ASSY | 1 | |
| 956A6821 | FIXTURE, LIFTING - SUPPORT BEARING 2 ASSY | 1 | |
| 956A6823 | FIXTURE, LIFTING - SUPPORT BEARING 1 ASSY | 1 | |
| 956A6827 | FIXTURE - LIFTING - AND TURN - SHAFT - SUPPORT BEARING 2 | 1 | |
| 956A6828 | FIXTURE LEAKAGE TEST - BEARING SUPPORT 1/2 | 1 | |
| 956A6829 | FIXTURE - RETAINING - BEARING 2 INNER RACE | 1 | |
| 956A6831 | FIXTURE - RETAINING - BEARING 1 INNER RACE | 1 | |
| 956A6832 | FIXTURE - RETAINING - SUPPORT BEARING 2 | 1 | |
| 956A6843 | FIXTURE - POSITIONING BEARING SUPPORT 1/2 | 1 | |
| 956A6845 | FIXTURE - POSTIONNING - TUBES BEARING SUPPORT 1/2 | 1 | |
| 956A6847 | FIXTURE - INSTALL/REMOVE BEARING SUPPORT 1/2 | 1 | |
| 956A6849 | FIXTURE - MEASURING BEARING SUPPORT 1/2 | 1 | |
| 956A6985 | FIXTURE - SUPPORT LINE 1-LINE 2 - BEARING TGB | 1 | |
| 956A7001 | FIXTURE - LIFT - INSTALL/REMOVE - FAIRING - FLOW PATH | 1 | |
| 956A7015 | FIXTURE - REMOVAL/INSTALL-SPLITTER FAIRING | 1 | |
| 956A7015G01 | FIXTURE SPLITTER FAIRING | 3 | |
| 956A7303 | FIXTURE - MAINTAIN - RETAINING RING STG 1 | 1 | |
| 956A7630 | FIXTURE - INSTALL - RING RETAINER - LPT NUT | 1 | |
| 956A7632 | FIXTURE - INSTALL - RING RETAINER TGB SHAFT | 1 | |
| 956A7632G01 | FIXTURE, INSTALL - RING RETAIN | 5 | |
| 956A8002 | FIXTURE - GUIDE - 1-2 BEARING SUPPORT | 1 | |
| 956A8004 | FIXTURE - LIFT AND TURN - BEARING 1/2 | 1 | |
| 956A8006 | FIXTURE - GUIDE - BEARING 1/2 SUPPORT | 1 | |
| 956A8025 | FIXTURE - CHECK - NOZZLE - OIL BEARING 2 | 1 | |
| 956A8034 | FIXTURE - LIFT - INSTALL - FAIRING - FLOW PATH | 1 | |
| 956A8113 | FIXTURE - REMOVE - HOUSING - BEARING 3 DAMPER | 1 | |
| 956A8125 | FIXTURE - LOCK - IGV RING | 1 | |
| 956A8140 | FIXTURE - LIFT - VBV ACTUACTING RING | 1 | |
| 956A8320 | FIXTURE - REMOVE - RING SEAL | 1 | |
| 956A8402 | FIXTURE - INSTALL/REMOVE - RING - SEAL-REAR ENCLOSURE | 1 | |
| 956A8403 | FIXTURE - INSTALL/REMOVE - RING - SEAL | 1 | |
| 956A8404 | FIXTURE - HOLDING RING - LPT CASE | 1 | |
| 956A8430 | FIXTURE - INSTALL - BOLT D - RETAINING RING | 1 | |
| 956A8432 | FIXTURE - DOG-CLUTCHING - RING - SEAL STG 2 | 1 | |
| 956A8449 | FIXTURE - SUPPORT -RING RETAINER STAGE 1 | 1 | |
| 956A8452 | FIXTURE - REMOVE - RING - RETAINER LPT STG 4 - 5 | 1 | |
| 956A8492 | FIXTURE - ASSEMBLY STAND - NO.5 BEARING SUPPORT | 1 | |
| 956A8493 | FIXTURE - VARIABLE CG - NO.5 BEARING SUPPORT | 1 | |
| 956A8495 | FIXTURE - INSTALL - NO.5 BEARING SQUEEZE FILM | 1 | |
| 956A8498 | FIXTURE - RESTRAIN - LPT BEARING 5 ASSY | 1 | |
| 956A8541 | FIXTURE - LIFT AND TURN - NO.5 BEARING SUPPORT | 1 | |
| 956A8609 | KIT FIXTURE - ASSEMBLY LOCKING RING | 1 | |
| 956A8631 | FIXTURE - INSTALL/REMOVE - LPT NUT - RETAINING RING | 1 | |
| 956A8641 | FIXTURE - LIFT - FRONT CENTERING/INSTALL LPT | 1 | |
| 956A8642 | FIXTURE - REAR CENTERING - LPT | 1 | |
| 956A8694 | FIXTURE - INSTALL - FRONT CENTERING/INSTALL LPT | 1 | |
| 956A8802 | FIXTURE - ASSY/DISASSY - SUPPORT BEARING 2 | 1 | |
| 956A8803 | FIXTURE - INSTALL/REMOVE- SUPPORT BEARING 2 | 1 | |
| 956A8804 | FIXTURE - ASSY/DISASSY - SUPPORT BEARING 1 | 1 | |
| 956A8805 | FIXTURE - INSTALL/REMOVE- SUPPORT BEARING 1 | 1 | |
| 956A8806 | FIXTURE - TORQUE - BEARING 2 INNER RACE | 1 | |
| 956A8807 | FIXTURE - TORQUE - BEARING 2 OUTER RACE | 1 | |
| 956A8809 | FIXTURE - TORQUE - NUT BEARING 1 | 1 | |
| 956A8810 | FIXTURE - LIFT AND TURN - 1 & 2 BEARING SUPPORT | 1 | |
| 956A8811 | FIXTURE - LIFTING - 1 & 2 BEARING SUPPORT/FAN & BOOSTER ASSY | 1 | |
| 956A8814 | FIXTURE - REMOVE - BEARING 2 INNER RACE | 1 | |
| 956A8816 | FIXTURE - REMOVE - BEARING 1 INNER RACE | 1 | |
| 956A8817 | FIXTURE - REMOVE - SUPPORT BEARING 2 ASSY | 1 | |
| 956A8820 | FIXTURE - LIFTING - SUPPORT BEARING 2 ASSY | 1 | |
| 956A8822 | FIXTURE - LIFTING - SUPPORT BEARING 1 ASSY | 1 | |
| 956A8825 | FIXTURE - LIFTING AND TURN - SHAFT / SUPPORT BEARING 2 | 1 | |
| 956A8826 | FIXTURE - LEAKAGE TEST - BEARING SUPPORT 1/2 | 1 | |
| 956A8827 | FIXTURE - RETAINING - BEARING 2 INNER RACE | 1 | |
| 956A8828 | FIXTURE - RETAINING - BEARING 2 OUTER RACE | 1 | |
| 956A8829 | FIXTURE - RETAINING - BEARING 1 INNER RACE | 1 | |
| 956A8830 | FIXTURE - RETAINING - SUPPORT BEARING 2 | 1 | |
| 956A8839 | FIXTURE - POSITIONING - TUBES - 1 & 2 BEARING SUPPORT | 1 | |
| 956A8842 | FIXTURE - REMOVE - SUPPORT BEARING 2 | 1 | |
| 956A8871 | FIXTURE - TORQUE - LPC AND BEARING SUPPORT | 1 | |
| 956A8909 | FIXTURE - SUPPORT - LINE 1 BEARING - TGB | 1 | |
| 956A8916 | FIXTURE - SUPPORT - LINE 1 BEARING - TGB | 1 | |
| 956A8942 | FIXTURE - SUPPORT - LINE 1 BEARING - AGB | 1 | |
| 956A8954 | FIXTURE - SUPPORT - LINE 4 AND 5 BEARING - AGB | 1 | |
| 956A8955 | FIXTURE - SUPPORT - LINE 5 BEARING - AGB | 1 | |
| 956A8960 | FIXTURE - SUPPORT - LINE 6 AND 9 BEARING - AGB | 1 | |
| 956A8962 | FIXTURE - SUPPORT - LINE 6 - 7 AND 8 BEARING - AGB | 1 | |
| 956A8963 | FIXTURE - SUPPORT - LINE 7 BEARING - AGB | 1 | |
| 956A8966 | FIXTURE - SUPPORT - BEARING - AGB | 1 | |
| 956A8968 | FIXTURE - SUPPORT - LINE 9 BEARING - AGB | 1 | |
| 98A27303502000 | MEASURING EQUIPMENT,USE TO CHECK FIXTURE | 2 | |
| 98A53703508000 | EXPANDING FIXTURE-NLG BEARING FITTING | 1 | |
| 98D57004038000 | FIXTURE BORING-CARDEN FITTING | 9 | |
| 98D57004038002 | FIXTURE BORING-CARDEN FITTING | 1 | |
| 98S10203001000 | Mooring / Lifting Fixture | 1 | |
| 995011 | SEALING STRAP AND SOLDE-RING FIXTURE | 1 | |
| 9C1361G01 | FIXTURE, SPINNER AND SPINNER AFT SUPPORT RING | 1 | |
| 9C1443 | FIXTURE, RESTRAINING-LPT INNER AND OUTER LOCK RINGS | 1 | |
| 9C1593 | FIXTURE CENERING | 1 | |
| 9C1594 | FIXTURE CENTERING | 1 | |
| 9C1678G02 | Centering Fixture | 1 | |
| 9C2296 | FIXTURE CENTERING STG 5 VANE | 1 | |
| 9C2296G02 | Fixture centering STG 5 | 1 | |
| 9C2297 | FIXTURE CENTERING STG 5 VANE | 1 | |
| 9C2297G02 | Fixture centering STG 6 | 1 | |
| 9C2298 | FIXTURE CENTERING STG 7 VANE | 1 | |
| 9C2298G02 | Fixture centering STG 7 | 1 | |
| 9C2299G02 | Fixture centering STG 8 | 1 | |
| 9C2365 | FIXTURE, HANDLING BEARING ASSEMBLY NO 2 | 1 | |
| 9C3016 | FIXTURE, TORQUE - NO.5 BEARING SPANNER NUT | 1 | |
| 9C3016G01 | FIXTURE, TORQUE - NO.5 BEARING SPANNER NUT | 1 | |
| 9C3067 | SUPERSEDED BY G02FIXTURE, RESTRAINING-NO 3 BEARING, ROTATING SEAL | 1 | |
| 9C3084 | FIXTURE, RESTRAINING-NO 5 BEARING SEAL HSG | 1 | |
| 9C3190 | UNISON RING BUSHING REMOVAL/INSTALLATION FIXTURE | 1 | |
| 9SF11342-501 | Spring Fixture | 1 | |
| 9С3016G01 | FIXTURE, TORQUE NO.5 BEARING SPANNER NUT | 1 | |
| A27028-11 | CHECKING FIXTURE - LOAD LIMITER SPRING, AILERON CONTROL | 3 | |
| A27029-28 | REMOVAL/INSTALLATION FIXTURE - LOAD LIMITER AILERON CONTROL SPRING | 1 | |
| A27041-177 | FIXTURE FEEL ELEVATOR CENTERING UNIT | 1 | |
| A32042-1 | FIXTURE - FUNCTIONAL TEST, SIDE STRUT SPRING ASSEMBLY | 1 | |
| A32072-1 | FIXTURE - FUNCTIONAL TEST, NOSE LANDING GEAR STEERING ACTUATOR | 1 | |
| A52009-1 | TEST FIXTURE - BUNGEE SPRING, CARGO DOOR | 1 | |
| A52009-22 | TEST FIXTURE - BUNGEE SPRING, CARGO DOOR | 2 | |
| A52029-1 | CARGO DOOR BUNGEE SPRING TEST FIXT. | 3 | |
| A78010-1 | CHECK FIXTURE - SPRING INTERLOCK BELLCRANK, JT9D | 1 | |
| AA292579 | SPRING COMPRESSOR TOOL NO. AA292579 FOUR (4) REPLACEMENT HOSES FOR CYLINDER HEAD HYDRAULIC MOUNTING FIXTURE AA293268 | 1 | |
| AC21869000 | FIXTURE TOOL (for the back-up rings on the piston) | 8 | |
| AETL131113 | MEASURING FIXTURE | 1 | |
| AGE-70505 | TURBINE RING SUPPORT INSPECTION FIXTURE | 1 | |
| AGE10049 | BEARING ALIGNING FIXTURE | 2 | |
| AGE10049 (FBS-30129) | Bearing Assembly Fixture | 1 | |
| AGE10165 | BEARING PULLER FIXTURE ASSEMBLY | 1 | |
| AGE10260 | COMPRESSOR FIXTURE, VALVE SPRING | 1 | |
| AGE13628 | Wave Ring Installation Fixture | 2 | |
| AGE13628PM | WAVE RING INSTALLATION FIXTURE | 1 | |
| AGE16276 | FIXTURE, SPRING ASSEMBLY | 1 | |
| AGE16551 | FIXTURE, SPRING COMPRESSION | 1 | |
| AGE16568 | FIXTURE DISASSEMBLY, FEATHERING ASSEMBLY | 1 | |
| AGE17630 | FIXTURE, HOLDING, BEARING LINER REMOVAL | 1 | |
| AGE17633 | FIXTURE, HOLDING, BEARING LINER INSTALL | 1 | |
| AGE17638 | Fixture, Holding, Bearing Liner Removal | 1 | |
| AGE17639 | Fixture, Holding Bearing Liner Install | 1 | |
| AGE18801 | LOCK PISTON SPRING FIXTURE | 1 | |
| AGE19074 | SPRING INSTALL FIXTURE | 1 | |
| AGE70505 | TURBINE RING SUPPORT INSPECTION FIXTURE | 1 | |
| AR024A001 | FIXTURE-SPRING LOAD SETTING | 1 | |
| ARG7076-5511 | Metering Valve Test / Holding Fixture | 2 | |
| AT1 1 1 9 | BEARING PRESSING FIXTURE, | 1 | |
| AT3294 | FIXTURE, BEARING PRESSING, APU | 1 | |
| AT55850 | Electrical bonding test fixture (support drag brace during tests) | 1 | |
| AT55852 | Test Fixture (support sidestay during tests) | 1 | |
| AT65-44835 | Bearing Assembly Fixture | 1 | |
| AT65-44835PM | BEARING ASSEMBLY FIXTURE - INSTALLING BEARINGS FOR INPUT SHAFT ASSEMBLY AT65-44835 | 1 | |
| B27024 | FIXTURE -0 SPRING, INSTL & REMOVAL, NEUT SHIFT | 1 | |
| B27024-1 | REMOVAL/INSTALLATION FIXTURE - NEUTRAL SHIFT ROD SPRING | 1 | |
| B27053 | FIXTURE -0 SPRING, INSTL & REMOVAL, NEUTRAL | 1 | |
| B27053-1 | FIXTURE - SPRING INSTALLATION AND REMOVAL, RUDDER NEUTRAL SHIFT ROD | 2 | |
| B78004 | RIGGING FIXTURE -0 SPRING BUMPER, FAN DUCT COWL | 1 | |
| B78004-1 | RIGGING FIXTURE - SPRING BUMPER, FAN DUCT COWL AND THRUST REVERSER | 3 | |
| B78004-1-M | RIGGING FIXTURE-SPRING BUMPER | 1 | |
| BFG179-236 | FIXTURE BEARING CUP RENOVAL-INSTALLATION | 1 | |
| BOF112T7000 | BORING FIXTURE, AFT DIAGONAL | 1 | |
| BOF311T2110 | BORING FIXTURE, ENGINE STRUT UPPER SPAR FITTING | 1 | |
| BOF321U2181-1 | BORING FIXTURE FITTING | 1 | |
| BOF65B00763 | BORING FIXTURE - BODY LANDING GEAR TRUNNION SUPPORT FITTING REWORK | 1 | |
| BOF65B07950 | BORING FIXTURE - TRUNNION FITTING ASSEMBLY, NOSE LANDING GEAR | 1 | |
| BOF65B10400 | BORING FIXTURE | 1 | |
| BOF767LS311T4185 | BORING FIXTURE LOWER SPAR FITTING ASSEMBLY | 1 | |
| BOFAOGTOOL747LG00 | BORING FIXTURE -0 FITTING ASSY-TRUNNION NOSE | 1 | |
| BOFAOGTOOL747LG0013 | BORING FIXTURE FITTING ASSEMBLY - TRUNNION, NOSE LANDING GEAR | 1 | |
| C07006-1 | Tethering Fixture - Rear Spar Vertical Fin, Aft Fitting | 2 | |
| C07006-1-M | TETHERING FIXTURE | 1 | |
| C07006-16 | TETHERING FIXTURE - REAR SPAR VERTICAL FIN, AFT FITTING | 5 | |
| C27005-1 | Assembly Fixture - Elevator Feel and Centering Unit | 1 | |
| C27005-19 | Assembly Fixture - Elevator Feel and Centering Unit | 3 | |
| C28005-8 | CENTERING FIXTURE | 1 | |
| C32036-1 | FIXTURE METERING PIN | 2 | |
| C32036-45 | FIXTURE METERING PIN | 5 | |
| C32036-46 | FIXTURE METERING PIN | 4 | |
| C32036-92 | NLG STEERING ACTUATOR FIXTURE EQUIPMENT | 7 | |
| C52001-1 | Holding Fixture - Compressed Spring Cartridge | 4 | |
| C52004 | HOLDING FIXTURE - COMPRESSED SPRING CARTRIDGE | 1 | |
| C52004-1 | HOLDING FIXTURE - COMPRESSED SPRING CARTRIDGE | 11 | |
| C52005-1 | Fixture Equipment - Automatic Overwing Exit Door Spring | 4 | |
| CF65B81128 | FIXTURE - MEASURING | 1 | |
| CF65B82106 | SPRING CHECKING FIXTURE - LOAD LIMITER ASSEMBLY, AILERON CONTROL | 1 | |
| CG9545401-0001 | SPECIAL FIXTUREAFT FAIRING REMOVAL INST | 1 | |
| CJMD8A27-003 | ELEVATOR CENTERING FIXTURE | 2 | |
| CPWA-30441 | Fixture – Loading #1 Bearing | 1 | |
| CPWA-30830 | Fixture, no. 1 bearing housing | 1 | |
| D-15518-2 | Spring Pin Installation Fixture | 1 | |
| D15657 | BEARING REMOVAL FIXTURE - LOWER BEARING HOUSING | 1 | |
| D46110 | Compression Fixture For Spring | 4 | |
| DAPT60-0392-00-IAS | DOWTY PROP BEARING FIXTURE Q400 | 1 | |
| DK741 | CENTERING FIXTURE | 1 | |
| E 51417 | SPRING ASSEMBLY & DISASSEMBLY FIXTURE | 1 | |
| E54993 | BEARING TORQUE FIXTURE | 1 | |
| E54994 | BEARING TORQUE FIXTURE | 1 | |
| E56440 | BEARING TORQUE FIXTURE | 1 | |
| E56441 | BEARING TORQUE FIXTURE | 1 | |
| EP5262-195A | BEARING SUPPORT FLUSHING FIXTURE | 1 | |
| EP5262-242 | Governor Bearing Support Flushing Fixture | 1 | |
| Ex-71586 | Fixture, grinding, turbine front bearing retaining | 1 | |
| Ex-92647 | Fixture-holding, nose bearing plate | 1 | |
| Ex-97184 | Fixture-holding, nose bearing plate | 1 | |
| F-1414 | Fixture, Snapbak Spring | 1 | |
| F-16181 | BEARING REMOVAL FIXTURE | 1 | |
| F2MA927522 | SET OF BACKLASH MEASURING FIXTURES | 1 | |
| F2MA927522100 | MEASURING FIXTURE FOR FLAP INTERMEDIATE TRANSFER GEARBOX BACKLASH AND TORQUE | 1 | |
| F2MA927522200 | MEASURING FIXTURE FOR FLAP DUAL TRANSFER GEARBOX BACKLASH AND TORQUE | 1 | |
| F2MA927522300 | MEASURING FIXTURE FOR FLAP POWER DRIVE UNIT BACKLASH | 1 | |
| F2MA927522400 | MEASURING FIXTURE FOR FLAP ACTUATOR BACKLASH | 1 | |
| F2MA927522500 | MEASURING FIXTURE FOR FLAP ACTUATOR SCREW-NUT PLAY | 1 | |
| F65-0-3036 | Test Fixture (Steering Valve) | 1 | |
| F65-0-3098 | Test Fixture (Steering Valve) | 1 | |
| F65-0-3098-29 | Detail 29, Nose Gear Steering Test Fixture | 1 | |
| F65-0-3098-41 | Detail 41 (DLD Cover Plate), Nose Gear Steering Test Fixture | 1 | |
| F65-0-3098-42 | Nose Gear Steering Test Fixture Detail 42 (Compensator Cap) | 1 | |
| F73008 | TEST FIXTURE-ELEVATOR FEEL & CENTERING UNIT | 1 | |
| F80-0-5932 | MOTOR SOLDERING FIXTURE | 1 | |
| F80096-1 | HOLDING FIXTURE - FORWARD TRUNNION BEARING HOUSING, MAIN GEAR | 2 | |
| F80096-1 -4 -7 | Holding Fixture -Forward Trunnion Bearing Housing. Main Gear | 1 | |
| F80096-1-4-7 | MLG TRNION BEARING HOLD FIXTURE | 1 | |
| F80096-4 | HOLDING FIXTURE - FWD TRUNNION BEARING H | 10 | |
| F80096-7 | HOLDING FIXTURE ASSY-MLG FWD TRUNNION BEARING | 6 | |
| F80120-1 | Test Fixture - Elevator and Rudder Centering Unit | 2 | |
| F80243-1 | FIXTURE - TETHERING REAR SPAR VERT FIN | 1 | |
| FBS-30129 | Bearing Assembly Fixture | 1 | |
| FBS-30132 | FIXTURE BEARING PULLER | 2 | |
| FBS30129 | BEARING ALIGNMENT FIXTURE | 1 | |
| FDS-41331 | FIXTURE (BEARING INSTALLATION) (2IT) | 1 | |
| FGFB927501 | RUDDER DEFLECTION MEASURING FIXTURE | 2 | |
| FGFB927504A1 | MEASURING FIXTURE FOR RUDDER PEDAL LOAD AND TRAVEL DISTANCE | 1 | |
| FGFB927507-1 | LH AILERON DEFLECTION MEASURING FIXTURE | 1 | |
| FGFB927507-2 | RH AILERON DEFLECTION MEASURING FIXTURE | 1 | |
| FIG908 | BEARING CUP REMOVAL FROM SLEEVE FIXTURE | 1 | |
| FXT- 03934 | BEARING FIXTURE (3IT) | 1 | |
| FXT-03438 | Spring Compression Fixture | 1 | |
| FXT-03934 | BEARING PRESS FIXTURE | 1 | |
| FXT-09694 | BEARING HOLDING FIXTURE | 1 | |
| FXT03934 | BEARING PRESS FIXTURE | 1 | |
| FXT09694 | BEARING HOLDING FIXTURE | 1 | |
| G211 | Fixturing | 1 | |
| G2111 | Fixturing | 1 | |
| G2111 | Fixturing Repair | 1 | |
| GB6-16 JAR NO SHANK | Fixture, Centering | 1 | |
| GB7-16 JAR NO SHANK | Fixture, Centering | 1 | |
| GS10362 | FIXTURE SLIP RING FACI | 1 | |
| GS10752 | BEARING ASSY FIXTURE | 1 | |
| GS10752-1 | FIXTURE - BEARING ASSY | 1 | |
| GS12676 | FIXTURE ELEC. CONTACT RING LOCATE | 1 | |
| GS14698-1 | FIXTURE, BEARING INSERTER | 1 | |
| GS15768-1 | FIXTURE – 0 RING COMPRESSOR | 1 | |
| GS15848-1 | MONITORING FIXTURE | 8 | |
| GS19474-1 | Depth Measuring -Fixture | 2 | |
| GS20382-1 | FIXTURE, BEARING PRESS | 1 | |
| GS20414-1 | TURING FIXTURE | 6 | |
| GS22921-1 | FIXTURE, BEARING TORQUE | 1 | |
| GS22924-2 | TORQUE MEASURING FIXTURE | 1 | |
| GSB5231001 | TEST FIXTURE P/N: GSB5231001 TO BE USED IN TESTING JXH AFT BAGGAGE DOOR GAS SPRINGS INTEGRITY. | 1 | |
| GSE55271 | FIXTURE, STEERING RIG | 1 | |
| HS 9515 | FIXTURE CAM BEARING NUT TORQUE | 1 | |
| HS2683 | FIXTURE SLIP RING | 1 | |
| HS6809 | FIXTURE BEARING | 1 | |
| HS7566 | FIXTURE, CAM BEARING NUT | 1 | |
| HS7876 | FIXTURE SPRING | 1 | |
| HS8040 | FIXTURE - AUX. FEATHERING VALVE | 1 | |
| HS8962 | FIXTURE, SLIP RING FACING | 2 | |
| HS9147 | FIXTURE PRELOAD TORSION SPRING | 1 | |
| HS9512 | FIXTURE - SPRING COMPRESSING | 2 | |
| HS9515 | FIXTURE, CAM BEARING NUT TORQUE | 1 | |
| HS9520 | FIXTURE, SLIP RING FACING | 1 | |
| HSP2683 | FIXT SLIP RING ALIGNIN | 1 | |
| HU26664 | BLADE ASSY FIXTURE (RING 6082 ALLY) | 1 | |
| IAE 3P16434 | FLARING FIXTURE (SELF-LOCKING CLINCH NUT IS 0.250-28 THREAD AND IS FLARED TO 30 DEGREES CONICAL ANGLE) | 1 | |
| IAE1P16567 | FIXTURE,FLARING,MECHANICAL-CLINCH NUT | 3 | |
| IAE3J12795 | FLARING FIXTURE | 1 | |
| IAE3J12796 | FLARING FIXTURE | 1 | |
| IAE3J12816 | CURING FIXTURE | 1 | |
| J32056-1 | Fixture assy-functional test，NLG steering actr | 2 | |
| J32067 | FIXTURE FUNCTIONAL TEST LANDING GEAR SPRINGS | 1 | |
| J32067-1 | FIXTURE - FUNCTIONAL TEST, LANDING GEAR SPRINGS | 2 | |
| J32067-155 | FIXTURE - FUNCTIONAL TEST, LANDING GEAR SPRINGS | 1 | |
| J32067-46 | FIXTURE - FUNCTIONAL TEST, LANDING GEAR SPRINGS | 2 | |
| J32067-85 | FIXTURE - FUNCTIONAL TEST, LANDING GEAR SPRINGS | 4 | |
| K52013 | TEST FIXTURE - BUNGEE SPRING CARGO DOOR | 1 | |
| LA797A001 | Spring Loading Fixture | 1 | |
| LAG-5877 | BEARING CUP REMOVAL FROM SLEEVE FIXTURE | 1 | |
| LLA797A001 | SPRING LOADING FIXTURE | 1 | |
| LLA954A033 | SPRING LOADING FIXTURE | 1 | |
| LMT 967 | DIFFUSER CASE MEASURING FIXTURE | 1 | |
| LTCT3880 | Fixture, Centering, Compressor Rotor | 2 | |
| LTCT5455 | Fixture-Centering Compressor Rotor | 1 | |
| LTCT7202-01 | FIXTURE, HOLDING NO. 4 AND 5 BEARING OIL TUBE | 1 | |
| LTCT7217 | Fixture, Pressure Test Bearing Support Assy. | 1 | |
| LTCT7493-01 | Fixture, Test, Pressure, No. 4/5 Bearing | 1 | |
| LTCT7508-01 | Fixture, No. 2 Bearing Package Pressure Check | 1 | |
| LTCT7515-01 | Fixture, No. 3 Bearing Housing Support Oil Flow | 1 | |
| LTCT7845-01 | Fixture, Flow, No. 2 Bearing Housing | 1 | |
| LTCT7879-01 | Fixture, Bearing Screen Repair | 1 | |
| M.DX7061N2-0 | HOLDING FIXTURE TO HOLD THE MANIFOLD ASSEMBLY DURING ASSEMBLY/ DISASSEMBLY | 1 | |
| M21929 | TENSIONING FIXTURE TOOL (LOCK SPRING TOOL) | 26 | |
| M53042A0000-01 | FIXTURE ANGLE MEASURING | 1 | |
| M56863A0000-01 | MEASURING FIXTURE | 1 | |
| M57716A0000-01 | MEASURING FIXTURE | 1 | |
| M57718A0000-01 | MEASURING FIXTURE | 1 | |
| M58166A0000-01 | MEASURING FIXTURE | 1 | |
| M58636A0000-01 | MEASURING FIXTURE | 1 | |
| M59034A0000-01 | MEASURING FIXTURE | 1 | |
| M59063A0000-01 | MEASURING FIXTURE | 1 | |
| M65725103A | FIXTURE FOR ASSY OF SPRING IN. T17 (2IT) | 1 | |
| MBEU57834 | HOLDING FIXTURE-FIRING UNITS | 1 | |
| MIT65B82106 | SPRING INSTALLATION AND REMOVAL FIXTURE - LOAD LIMITER, AILERON CONTROL | 1 | |
| PLF617-4431-001 | BEARING PRELOAD FIXTURE | 1 | |
| PR 135 | BEARING ASSEMBLING PRESS-IN FIXTURE | 1 | |
| PR135 | BEARING ASSEMBLING PRESS-IN FIXTURE | 1 | |
| PS10352 | BEARING PRESS FIXTURE | 1 | |
| PS10518 | BEARING PRESS FIXTURE | 1 | |
| PWA 12812 | Fixture Compr.rear bearing seal air pressure tube | 1 | |
| PWA 16197 | FIXTURE NO.6 BEARING SEAL HOUSING | 1 | |
| PWA 27860 | BEARINGFIXTURE TOOL | 2 | |
| PWA 75247B | RETAINING RING FIXTURE | 1 | |
| PWA211466 | FIXTURE,FLARING | 2 | |
| PWA25658 | FIXTURE - NO.1,2,3 BEARING FLUSHING_[PWA25658] | 1 | |
| PWA26436 | FIXTURE - MOLD, AIRSEALING RING | 2 | |
| PWA27562 | RING, ADAPTER - #3 BRG HOUSING FIXTURE_[PWA27562] | 2 | |
| PWA29647 | FIXTURE - SEAL ASSEMBLY, N1 & 2 BEARING_[PWA29647] | 2 | |
| PWA52922 | FORWARD RING MOLD FIXTURE | 1 | |
| PWA52923 | REAR RING MOLD FIXTURE | 1 | |
| PWA55925 | REAR RING MOLD FIXTURE | 1 | |
| PWA55926 | FORWARD RING MOLD FIXTURE | 1 | |
| PWA75913 | FIXTURE - HOLDG NO4 BEARING SEAL SPACER_REPLACESPWA27491BYT.B87-067_[PWA75913] | 1 | |
| PWA80811-8 | FIXTURE, ASSEMBLY-NO.1 BEARING SHOULDER STUDS | 1 | |
| PWA80865 | FIXTURE, LEFT GEARING DRIVE | 1 | |
| PWA80866 | FIXTURE, RIGHT GEARING DRIVE | 1 | |
| PWA85375 | FIXTURE HANDLING ENG. ASSY HPC 2 BEARING FRONT CASE | 1 | |
| PWA85378 | FIXTURE HANDLING ENG. ASSY HPC 2 BEARING FRONT CASE | 1 | |
| PWA85379 | FIXTURE HANDLING ENG. ASSY HPC 2 BEARING FRONT CASE | 1 | |
| PWA85384 | FIXTURE HANDLING ENG. ASSY.HPC # 2 BEARING FRONT CASE | 1 | |
| PWA85390 | FIXTURE HANDLING ENG. ASSY.HPC # 2 BEARING FRONT CASE | 1 | |
| PWA85391 | FIXTURE HANDLING ENG. ASSY.HPC # 2 BEARING FRONT CASE | 1 | |
| PWA85403 | FIXTURE HANDLING ENG. ASSY.HPC # 2 BEARING FRONT CASE | 1 | |
| PWA85406 | FIXTURE HANDLING ENG. ASSY.HPC # 2 BEARING FRONT CASE | 1 | |
| PWA85698 | FIXTURE FLARING DUCT | 1 | |
| PWA85989 | FIXTURE-HANDLING FUEL PUMP FUEL METERING UNIT | 4 | |
| PWC30506 | TEST RING AND FIXTURE | 6 | |
| PWC34598 | FIXTURE HOLD VANE RING | 3 | |
| PWC37029 | FIXTURE, LOADING, OIL PUMP DRIVE SHAFT BEARING | 1 | |
| PWC37726 | FIXTURE, LOADING, OIL PUMP TRANSFER SHAFT BEARING | 1 | |
| PWC37737 | LOADING FIXTURE, HP IMPELLER CLEARANCE, NO. 4 BEARING | 1 | |
| PWC37911 | centering fixture | 3 | |
| PWC37914 | centering fixture | 4 | |
| PWC38088 | Fixture, Lifting & Loading LP Rotor & No. 3 Bearing Housing | 1 | |
| PWC38101 | FIXTURE, HOLDING, LOW PRESSURE VANE RING SEAL MACHINING | 2 | |
| PWC40479 | MEASURING FIXTURE | 1 | |
| PWC42079 | Holding Fixture No. 3 bearing housing | 1 | |
| PWC43522 | FIXTURE LOADING BEARING | 1 | |
| PWC50001 | FIXTURE, FLOW, BEARING SUPPORT SLEEVE | 2 | |
| PWC55804 | MEASURING AND LOADING FIXTURE | 1 | |
| PWC60129 | MEASURING FIXTURE | 1 | |
| PWC71016 | HOLDING FIXTURE -BEARING | 1 | |
| RB23033031 | Fixture-Holding Front Bearing Housing | 2 | |
| RB40MCAIRBUS001 | MLG BORING FIXTURE | 1 | |
| RB40MCAIRBUS003 | MLG BORING FIXTURE (KINDLY ADVISE MANUFACTURER AND PROVIDE CATALOG) | 1 | |
| RB6887818 | Bearing Bore Alignment Fixture | 2 | |
| RB6887819 | Gas Producer & Power Turbine Supports Bearing Bore Checking Fixt | 1 | |
| RB6893384 | Bearing Bore Alignment Fixture | 1 | |
| RBE105-14181W1 | NEEDLE BEARINGS ASSEMBLY FIXTURE | 3 | |
| RBE330A93-3412-00 | Tool, Ball Bearing Cage Fixture | 2 | |
| REP4M6-4FS428 | BEARING REMOVE FIXTURE | 1 | |
| RSE1220 | ASSEMBLY FIXTURE R/R RING ON NOZZLE | 1 | |
| RSE1220 REV C | ASSEMBLY FIXTURE RlR RING ON NOZZLE | 1 | |
| SCF2-8189 | FIXTURE-COMPRESSION,SPRING | 1 | |
| SPL-5655 | TOOL-FIXTURE, ACCESSORY GEAR BOX MATING RING REMOV | 1 | |
| SPL-5656 | FIXTURE-REMOVAL, ACCESSORY GEAR BOX MATING RINGS | 1 | |
| SSW9-217610-01 | Alignment Fixture (Stop Spring Position) (Optional) | 1 | |
| T 27306 | Setting Fixture Metering Valve | 1 | |
| T-00893-14 | Ring Fixture | 1 | |
| T-232794 | BEARING ASSEMBLY FIXTURE | 1 | |
| T-246995 | FIXTURE CENTERING | 1 | |
| T-27289 | FIXTURE, HOLDING METERING VALVE ASSY PRE | 1 | |
| T-27306 | SETTING FIXTURE METERING VALVE | 1 | |
| T-412380 | SPRING COMPRESSOR FIXTURE | 1 | |
| T-418656 | O-ring Fixture and driver | 1 | |
| T-438959 | Fixture Bearing Removal | 1 | |
| T12252-1 | PISTON BEARING CUTTING FIXTURE | 1 | |
| T14228 | JIG, MODIFIED TRANSISTOR (FET) SOLDERING FIXTURE | 1 | |
| T15421 | JIG, MODIFIED TRANSISTOR (FET) SOLDERING FIXTURE | 1 | |
| T25831 | FIXTURE - MEASURING | 1 | |
| T26769 | Fixture Measuring | 1 | |
| T27238 | Fixture Measuring | 1 | |
| T27254 | Fixture Measuring | 1 | |
| T27289 | Fixture, Holding Metering Valve Assy Preset | 1 | |
| T27306 | Setting Fixture Metering Valve | 1 | |
| T27342 | Fixture Measuring | 1 | |
| T3009208 | BEARING PRELOAD SETTING FIXTURE | 1 | |
| T3159-006 | SOLDERING FIXTURE | 1 | |
| T3159-6 | Soldering Fixture | 1 | |
| T3203-012 | Soldering Fixture | 1 | |
| T3754-009 | FIXTURE: TEST,SOLDERING, | 1 | |
| T3754-09 | SOLDERING FIXTURE | 1 | |
| T42315-60SC1 | SPRING COMPRESSION FIXTURE | 1 | |
| T42315-72SC1-101 | SPRING COMPRESSOR, SHEAVE CROWDER, 1 EA • T42315-60SC1, SPRING COMPRESSION FIXTURE, 1 EA | 1 | |
| T462168 | Bearing Holding Fixture | 1 | |
| T743806 | BEARING PRESS FIXTURE | 1 | |
| TAF00463 | BALL BEARING ASSEMBLY FIXTURE | 1 | |
| TAF00550 | BALL BEARING ASSEMBLY FIXTURE | 1 | |
| TB3125G001 | Cambering Fixture | 1 | |
| TEK-5006/5007 ASY | Transducer Assembly and Manipulating Fixture set, w/ Plunger and Syringe | 1 | |
| TEKIT-5006/5007 | Transducer Assembly & Manipulating Fixture Set, Includes all items per 767 PT4 57-50-05 PG9 FIG4, TEK-5006,TEK-5006-C1,TEK-5006-C2, TEK-5007, TEK-5007-C1, Manipulating Rod, Syringe, Cable, Couplant & 1450 Pelican Case *Does not include NDT694 & NDT695 | 1 | |
| TES-3775 | Fixture,Bearing Assembly | 1 | |
| TES-3775PM | FIXTURE,BEARING ASSEMBLY | 1 | |
| TF50B27502-1 | LH ELEVATOR DEFLECTION MEASURING FIXTURE | 1 | |
| TF50B27502-2 | RH ELEVATOR DEFLECTION MEASURING FIXTURE | 1 | |
| TF50B27507 | MEASURING FIXTURE FOR AILERON DEFLECTION AT CONTROL COLUMN | 1 | |
| TF50B27522 | SET OF BACKLASH MEASURING FIXTURES | 1 | |
| TF55707-201 | Test Fixture (support shock strut during tests) | 1 | |
| TST1008 | CENTERING FIXTURE | 1 | |
| V25SH2512 | MEASURING FIXTURE | 1 | |
| page 9004 | Bearing Cup Removal from Sleeve Fixture | 1 | |
| 98A27303502000 | MEASURING EQUIPMENT,USE TO CHECK FIXTURE | 2 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
