| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 856A4044G01 | FIXT MACH | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 11C3001 | FIXTURE - MACHINING FAN CASE | 1 | |
| 11C3001G03 | FIXTURE-FAN CASE SHROUD MACHINING (ALT SPL-13736) | 1 | |
| 11C3001G07 | FIXTURE, MACHINING FAN CASE SHROUD | 1 | |
| 11C3490 | FIXTURE - INSPECTION/MACHINING RESTRAIN-HP TURB CASE | 1 | |
| 18C1108 | LIFT FIXTURE WASH MACHINE | 1 | |
| 18C1316 | FIXTURE, MACHINING - FAN | 1 | |
| 1AE3J12772 | Machine Fixture (5 IT) | 1 | |
| 1AE3J12772-A | Machine Fixture (2 IT) | 1 | |
| 1C6007 | FIXTURE, MACHINE AND INSPECT - | 1 | |
| 1C6007G01 | FIXTURE, MACHINE AND INSPECT - | 1 | |
| 1C6193 | FIXTURE SET, MACHINING - FRONT COMPRESSOR STATOR | 1 | |
| 1C6193 REV B | FIXTURE SET, MACHINING - FRONT COMPRESSOR STATOR | 1 | |
| 1C6295 | FIXTURE, MACHINE | 1 | |
| 1C6295G01 | FIXTURE, MACHINE | 1 | |
| 1C6939 | FIXTURE, INSPECT AND MACHINE - | 1 | |
| 1C6939G01 | FIXTURE, INSPECT AND MACHINE - | 1 | |
| 21C7139P02 | SPECIAL TOOL - FIXTURE, MACHINE | 1 | |
| 21C7197G01 | FIXTURE, INSPECTION, MACHINING | 1 | |
| 21C7200G01 | MACHINING FIXTURE | 1 | |
| 21C7201G01 | FIXTURE, MACHINE, LANDS | 1 | |
| 21C7283G01 | FIXTURE, MACHINING | 1 | |
| 21C7284G01 | FIXTURE, MACHINING | 1 | |
| 21C7285G01 | FIXTURE, MACHINING | 1 | |
| 21C7286G01 | FIXTURE, MACHINING | 1 | |
| 21C7378G01 | FIXTURE, MACHINE STA | 1 | |
| 21C7760G01 | FIXTURE, MACHINING | 1 | |
| 291866-1 | BEARING CARRIER MACHINING FIXTURE | 1 | |
| 291867-1 | BEARING CARRIER MACHINING FIXTURE | 1 | |
| 293824-1 | BORING MACHINE GEAR BOX HOLDING FIXTURE | 1 | |
| 2C15042G03 | FIXTURE,MACHINING AND INSPECTION- HPT COUP. NUT | 2 | |
| 2C15619 | FIXTURE, MACHINE - BLOCKER DOOR HINGE | 1 | |
| 2C15619G01 | FIXTURE, MACHINE - BLOCKER DOOR HINGE | 1 | |
| 2C15620G01 | FIXTURE, MACHINING | 1 | |
| 2C15637G01 | MACHINING / INSPECTION FIXTURE | 1 | |
| 2C5712G01 | FIXTURE - MACHINING | 1 | |
| 2C5786G01 | FIXTURE - MACHINING SUMP SEALS | 1 | |
| 2C6537 | FIXTURE SET, MACHINING-C/R S | 1 | |
| 2C6537G01 | FIXTURE SET, MACHINING-C/R S | 1 | |
| 2C6538 | FIXTURE SET, MACHINING-C/R | 1 | |
| 2C6538G01 | FIXTURE SET, MACHINING-C/R | 1 | |
| 2C6539 | FIXTURE SET, MACHINING - C/R | 1 | |
| 2C6539G01 | FIXTURE SET, MACHINING - C/R | 1 | |
| 2C6544 | FIXTURE SET, MACHINING | 1 | |
| 2C6544G01 | FIXTURE SET, MACHINING | 1 | |
| 2C6546 | FIXTURE SET, MACHINING | 1 | |
| 2C6546G01 | FIXTURE SET, MACHINING | 1 | |
| 2C6577 | FIXTURE,MACHINE/INSPECT-HPTR P | 1 | |
| 2C6577G01 | FIXTURE,MACHINE/INSPECT-HPTR P | 1 | |
| 2C7048G02 | MACHINING AND INSPECTION FIXTURE | 1 | |
| 2C7098 | FIXTURE,MACHINE-NO.4 BEARING S | 1 | |
| 2C7098G01 | FIXTURE,MACHINE-NO.4 BEARING S | 1 | |
| 2C7101 | FIXTURE,MACHINE - NO. 4 BEARI | 1 | |
| 2C7101G01 | FIXTURE,MACHINE - NO. 4 BEARI | 1 | |
| 2C7143 | FIXTURE,MACHINING-TMF LINER | 1 | |
| 2C7143G01 | FIXTURE,MACHINING-TMF LINER | 1 | |
| 2C7182 | FIXTURE,MACHINE-HPT,STATIONARY | 1 | |
| 2C7182G01 | FIXTURE,MACHINE-HPT,STATIONARY | 1 | |
| 2C7185 | FIXTURE, MACHINE -HPT, STATION | 1 | |
| 2C7185G01 | FIXTURE, MACHINE -HPT, STATION | 1 | |
| 2C7511G01 | FIXTURE, MACHINING, TMF LINER | 1 | |
| 2C7512G03 | MACHINING FIXTURE, TMF LINER (MACHINING/ INSPECTION FIXTURE) | 1 | |
| 2C7669 | FIXT. MACHINING /INSPECTION - TMF LINK MOUNT | 1 | |
| 2C7760 | FIXTURE,MACHINING/WELDING-COMB | 1 | |
| 2C7760G01 | FIXTURE,MACHINING/WELDING-COMB | 1 | |
| 2C7856G01 | MACHINING FIXTURE, INNER LINER CUTOFF | 1 | |
| 2C91122G01 | FIXTURE-MACHINING TURBINE SEAL | 1 | |
| 2C91123G01 | FIXTURE-MACHINING TURBINE SEAL | 1 | |
| 2C91124G01 | FIXTURE-MACHINING TURBINE SEAL | 1 | |
| 2C91297G01 | FIXTURE - MACHINING - FAN DISK | 1 | |
| 2R1120 | FIXTURE, DOVETAIL MACHIN. STAGE 1 ROTOR FAN BLADE | 1 | |
| 2R1131 | STAGE 1 DATUM P MACHINE FIXTURE | 1 | |
| 2R1132 | STAGE 2 DATUM P MACHINE FIXTURE | 1 | |
| 2R1133 | STAGE 3 DATUM P MACHINE FIXTURE | 1 | |
| 2R1135 | STAGE 5 DATUM P MACHINE FIXTURE | 1 | |
| 2R1495 | MACHINING FIXTURE, OUTER LINER CUTOFF | 1 | |
| 2RII20 | FIXTURE, DOVETAIL MACHIN. STAGE I ROTOR FAN BLADE | 1 | |
| 3J12727 | Fixture, Machining | 1 | |
| 61AH | FIXTURE MACHANICAL ZERO | 1 | |
| 61AHPM | FIXTURE MACHANICAL ZERO | 1 | |
| 65-44761-F19 | Machining Fixture | 1 | |
| 6872632 | FIXTURE - MACHINING, COMPRESSOR CASE | 1 | |
| 6872760 | FIXTURE - MACHINING, OIL FILTER | 1 | |
| 6877003 | TURNING FIXTURE, SUPPORT MOUNTING FLANGE HOLDS FUEL NOZZLE FOR MACHINING OF MOUNTING FLANGE SEAL SURFACE. | 1 | |
| 6877005 | HOLDING FIXTURE, VALVE END HOLDS FUEL NOZZLE DURING CUTTING, MACHINING, AND WELDING OF VALVE END COMPONENTS. | 1 | |
| 6877006 | HOLDING FIXTURE, CHECK VALVE PLUG HOLDS FUEL NOZZLE DURING MACHINING OF CHECK VALVE PLUG WELD. | 1 | |
| 6877010 | HOLDING FIXTURE, TIP END HOLDS FUEL NOZZLE DURING CUTTING, MACHINING, AND WELDING OF TIP END COMPONENTS. | 1 | |
| 6877014 | PURGE FIXTURE, AIR (CHECK VALVE REMOVAL) BACK PRESSURES FUEL NOZZLE TO BLOW CHIPS OUT OF NOZZLE DURING CHECK VALVE MACHINING OPERATION. | 1 | |
| 6897008 | FACE PLATE ADAPTER MOUNTS MACHINING AND WELD FIXTURES TO LATHE. | 1 | |
| 83760372 | MACHINING FIXTURE | 1 | |
| 83760377 | MACHINING FIXTURE | 1 | |
| 856A 2369G02 | FIXTURE MACHINING NO. 5 OUTER RACE SLEEVE | 1 | |
| 856A-3265-G04 | Fixture, Machining | 4 | |
| 856A1056G04 | FIXTURE, MACHINING - HPC FRONT CASE (MACHINING FIXTURE)G02 | 5 | |
| 856A1056G05 | MACHINING FIXTURE | 8 | |
| 856A2314G05 | MACHINING FIXTURE - FAN FRAME | 1 | |
| 856A2369G02 | MACHINING FIXTURE - N5 BRG OUTER | 1 | |
| 856A2720P49 | MACHINING FIXTURE - FAN FRAME | 1 | |
| 856A2723G03 | Fixture Machine Sleeve | 1 | |
| 856A2723G04 | MACHINING FIXTURE - SLEEVE N°5 BRG OUTER RACE | 1 | |
| 856A2723G05 | MACHINING FIXTURE - SLEEVE N5 BRG | 2 | |
| 856A2907G01 | Fixture. Machine Abradable | 1 | |
| 856A2907G04 | MACHINING FIXTURE - FAN FRAME ABRADABLE LINER | 1 | |
| 856A2907G05 | MACHINING FIXTURE - FAN FRAME | 2 | |
| 856A3120 | FIXTURE, MACHINING | 1 | |
| 856A3120G04 | FIXTURE MACH. ABRADA | 1 | |
| 856A3265 | FIXTURE, MACH. SLEEVE | 1 | |
| 856A3265G03 | FIXTURE, MACHINING-SLEEVE | 2 | |
| 856A3265G04 | FIXT MACH SLEEVE #5 OUTER RACE | 4 | |
| 856A3265G05 | MACHINING FIXTURE | 1 | |
| 856A3549G03 | FIXTURE, MACHINING ABRADABLE STRIP | 5 | |
| 856A3580 | FIXTURE, MACHINING - FAN CASING ABRADABLE STRIP | 1 | |
| 856A3580G03 | FIXTURE MACHINING | 1 | |
| 856A3608 | FIXTURE AXIAL LOADING ABRADABLE STRIP MACHNG. | 1 | |
| 856A3608 REV E | FIXTURE AXIAL LOADING ABRADABLE STRIP MACHNG. | 1 | |
| 856A3776G01 | Fixture, Machining Adradable Strip | 1 | |
| 856A3784G01 | Fixture, Axial Load Abradable Strip Machining | 1 | |
| 856A3791 | MACHINING FIXTURE - SLEEVE N 5 BRG OUTER RACE | 1 | |
| 856A3791G01 | Fixt Mach Sleeve No.5 Brg Out Race | 1 | |
| 856A3791G03 | FIXTURE, MACHINING, SLEEVE, ADJUSTING - NO. 5 BEARING (MACHINING FIXTURE) | 1 | |
| 856A3791G04 | Fixture, Machining, Sleeve, Adjusting - No. 5 Bearing | 3 | |
| 856A4026G02 | FIXTURE MACHINING NO. 3 BEARING FORWARD STATIONARY OIL SEAL | 1 | |
| 856A4028G02 | FIXTURE,MACHINING-COMPR ROTOR AIR DUCT | 1 | |
| 856A4044 | FIXT. MACH HPCR STG4-9 | 1 | |
| 856A4044G01 | FIXT. MACH HPCR STG4-9 | 1 | |
| 856A4046 | (RT) FIXTURE, MACHINE | 1 | |
| 856A4046G02 | FIXTURE MACHINING COMPRESSOR ROTOR SHAFT | 1 | |
| 856A4076 | (RT) FIXTURE WELD & MACH | 1 | |
| 856A4076G02 | Weld & Machining Fixture | 1 | |
| 856A4076GO1 | Weld & Machining Fixture | 1 | |
| 856A4111G01 | FIXTURE MACHINE LINER OUTER | 1 | |
| 856A4206 | FIXTURE, WELD/MACHINE - SEAL LIP, COMBUSTOR, AFT | 1 | |
| 856A4206G02 | FIXTURE, WELD/MACHINE – SEAL LIP, COMBUSTOR, AFT | 1 | |
| 856A4230 | (RT) FIXTURE, MACHINING LINER, OUTER-COMB CHAMBER | 1 | |
| 856A4230G03 | FIXTURE, MACHINING – OUTER LINER, COMBUSTION CHAMBER | 1 | |
| 856A4234G03 | FIXTURE SET, MACHINING HPT ROTOR SHAFT - FRONT | 1 | |
| 856A4265 | FIXTURE, MACHINING - HPTR REARSHAFT | 1 | |
| 856A4265G01 | Machining Fixture - Hot Aft Shaft | 1 | |
| 856A5537G03 | FIXT MACH OUT STA AIR SEAL S-1 LPT | 1 | |
| 856A5575G01 | FIXT MACH INNER STATIONARY AIR | 1 | |
| 856A5601G01 | FIXT MACH LPT SHROUD SUPT | 1 | |
| 856A5640G02 | MACHINING FIXTURE - LPT COOLING AIR | 1 | |
| 856A5672G01 | FIXT, HOLD EDM MACHINING SLOT | 1 | |
| 856A5681G01 | FIXT MACH AFT SHROUD FACES | 1 | |
| 856A5682G01 | FIXT MACH FWD SHROUD FACES LPT | 1 | |
| 856A5727G01 | FIXT, CHECK / MACHINE OUTER ST | 1 | |
| 856A5729G01 | FIXT, CHECK / MACHINE OUTER ST | 1 | |
| 856A5731G01 | FIXT, CHECK / MACHINE OUTER ST | 1 | |
| 856A5733G01 | FIXT, MACHINE INNER STA. AIR S | 1 | |
| 856A5795G01 | MACHINING & CHECKING FIXTURE LPT | 1 | |
| 856A5795G02 | MACHINING & CHECKING FIXTURE LPT | 1 | |
| 856A5796G01 | MACHINING & CHECKING FIXTURE LPT | 1 | |
| 856A5797G01 | MACHINING & CHECKING FIXTURE LPT | 1 | |
| 856A6607 | FIXT MACH 26 TOOTH GEARSHAFT | 1 | |
| 856A6772G02 | FIXTURE CHECKING MACHINING | 1 | |
| 856A6776G01 | Fixture, Checking/Machining | 1 | |
| 856A6778G01 | Fixture, Checking/Machining | 1 | |
| 856A6780G01 | Fixture, Checking/Machining | 1 | |
| 856A6782G01 | Fixture, Checking/Machining | 1 | |
| 856A6784G01 | FIXTURE MACHINING | 1 | |
| 856A6786G01 | FIXTURE MACHINING | 1 | |
| 856A6788G01 | MACHINING FIXTURE | 1 | |
| 856A6792G02 | AFT SHROUD FACES MACHINING FIXTURE - LPT | 1 | |
| 965573-10 | REAMER,MACHINE:FUEL PYLON RIB FIXTURE | 1 | |
| 9C1703 | FIXTURE, MACHINING VANES SECT, | 1 | |
| 9R7066 | (RT) FIXTURE, MACHINING- STG1 FAN CASE SHROUD | 1 | |
| 9R7066G02 | FIXTURE MACHINING-STAGE 1 FAN CASE SHROUD (GRIND TOOL) | 1 | |
| 9R7066G03 | FIXTURE MACHINING-STAGE 1 FAN CASE SHROUD (GRIND TOOL) | 1 | |
| 9R7066G04 | FIXTURE MACHINING-STAGE 1 FAN CASE SHROUD (GRIND TOOL) | 1 | |
| 9R7066G06 | FIXTURE, MACHINING | 1 | |
| A44547 | MACHINE SHOP FIXTURE | 1 | |
| AL11 | MACHINE SHOP FIXTURE | 1 | |
| C-130 FIXTURE | Custom C-130 Blade Inside Bushing Probe Fixture per Drawing No. 201757983. Material: ABS Plastic machined not 3D Printed. | 1 | |
| EVT3745T130 | MACHINING FIXTURE | 1 | |
| G113-00-0152 | MACHINE FIXTURE (PPM INLET FITTING) | 1 | |
| G113-00-0153 | MACHINE FIXTURE (PS INLET FITTING) | 1 | |
| G113-00-0154 | MACHINE FIXTURE (PPM INLET) | 1 | |
| G113-00-0155 | MACHINE FIXTURE (PS INLET) | 1 | |
| G116-00-0132 | MACHINE FIXTURE (HEAT SHIELD) | 1 | |
| GS15634-1 | FIXTURE MOUNTING AIR CYCLE MACHINE | 1 | |
| HS7056 | FIXTURE MACHINI | 1 | |
| HS7299 | FIXTURE MACHINI | 1 | |
| HS7873 | FIXTURE,MACHINING,V | 1 | |
| HSP2479 | FIXTURE, MACHINI | 1 | |
| IAE1R18411 | FIXT MACH HPC ROTOR PATHS | 1 | |
| IAE1R18412 | FIXT MACH AND TURN HPC CASE | 1 | |
| IAE3J12772 | MACHINING FIXTURE | 1 | |
| IAE3J12801 | Machining fixture | 1 | |
| IAE3M14514 | MACHINING FIXTURE | 1 | |
| KRRT025629 | MACHINING FIXTURE | 1 | |
| LTCT11491 | Fixture, Machining | 1 | |
| MF165-44761 | Machining Fixture | 1 | |
| MF265-44761 | Machining Fixture | 1 | |
| PWA46215 | MACHINING FIXTURE | 1 | |
| PWA71560 | FIXTURE MACHINE SUPPORT AUGMENTOR NOZZLE | 1 | |
| PWA72173 | MACHINING FIXTURE | 1 | |
| PWA85557 | MACHINING FIXTURE | 1 | |
| PWA85568 | FIXTURE MACH.CONTRAINT HUB LPT FIFTH STAGE | 1 | |
| PWA85682 | Fixture, Constraint - Hub, LPT 5th Stage, Machining & Inspection | 2 | |
| PWC38101 | FIXTURE, HOLDING, LOW PRESSURE VANE RING SEAL MACHINING | 2 | |
| PWC38292 | Fixture machinery drilling | 1 | |
| PWC54874 | FIXTURE MACHINING HP BLADES | 1 | |
| PWC57563 | Fixture, machining | 1 | |
| PWC57564 | Fixture, machining | 1 | |
| PWC61087 | MACHINING FIXTURE | 1 | |
| PWC61768 | FIXTURE-MACHINING | 1 | |
| RRT001959 | MACHINING FIXTURE | 1 | |
| RRT025629 | MACHINING FIXTURE | 1 | |
| RRT025687 | MACHINING FIXTURE | 1 | |
| SAALC7744951 | 9TH MACHINING FIXTURE | 1 | |
| SAALC7744958 | 11TH MACHINING FIXTURE | 1 | |
| SAALC7744959 | 11TH MACHINING FIXTURE | 1 | |
| SAALC7744963 | 13TH MACHINING FIXTURE | 1 | |
| SAALC7744964 | 13TH MACHINING FIXTURE | 1 | |
| SK13157 | MACHINING FIXTURE FIGURE 904 | 1 | |
| SK13389 | MACHINING FIXTURE SHROUD COMPRESSOR APU | 1 | |
| lC6l93 | FIXTURE SET, MACHINING - FRONT COMPRESSOR STATOR | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
