| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| J55005-37 | FITTING ASSY E | 1 | |
| J55005-7 | FITTING ASSY E | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 0235707230 | REAR FITTING ASSY | 1 | |
| 05-05555 | AERONCA FITTING ASSY TAIL SKID SPRING | 1 | |
| 13-0541-1 | FITTING-EXTEND,ASSY | 1 | |
| 130-00-113-09 | FITTING ASSY, REAR | 1 | |
| 161W2328-1 | FITTING ASSY SIDE STRUT | 1 | |
| 161W2328-2 | FITTING ASSY-SIDE STRUT | 1 | |
| 20454141 | EXCHANGE TOOL - AXIS OF FRONT STUD FITTING ASSY | 1 | |
| 2TSJ65B01503 | Test fitting assy-hydraulic actuator assy，nose gear steering | 2 | |
| 3402471-1 | FWD LIFT FITTING ASSY, QEC | 1 | |
| 3403002-1 | HOIST FITTING ASSY, AE2100D3 PROPELLER GEAR BOX | 1 | |
| 3404003-1 | SLING FITTING ASSY, AE2100D3 REAR MOUNT | 1 | |
| 372447-1L | FITTING, JACK/TIEDOWN, NLG, LH ASSY | 1 | |
| 41401021-502 | ADAPTER ASSY, AFT FITTING | 1 | |
| 5315TD13913 | Fixture - Fitting Assy | 1 | |
| 66325A61 | GAS PURGING REGULATOR ASSY (CONTAINS PRESSURE REGULATOR, HOZE AND RELATED FITTINGS) | 1 | |
| 790004-1 | ASSY (FOR LINCOLN GREASE FITTINGS) | 1 | |
| 831381-1 | PULLER ASSY,HYDR TIGHT FITTING | 1 | |
| 98A29103000000 | ASSY.TOOL HYD.SEAL END FITTING | 13 | |
| 98D27403003102 | CLEVIS ASSY (UPPPER FITTING) +BALL LOCK PIN | 1 | |
| A318-92010-0001 | FITTING ASSY-HINGE ALIGNMENT TOOL | 1 | |
| A318-92010-0002 | FITTING ASSY-HINGE ALIGNMENT TOOL | 1 | |
| A32052-2 | Test fitting assy | 1 | |
| A32099-113 | END FITTING ASSY | 1 | |
| A32099-114 | END FITTING ASSY | 1 | |
| A32099-4 | END FITTING ASSY | 1 | |
| A32099-40 | END FITTING ASSY | 1 | |
| A32099-41 | END FITTING ASSY | 1 | |
| A32099-6 | END FITTING ASSY | 1 | |
| A32099-64 | END FITTING ASSY | 1 | |
| A32099-65 | END FITTING ASSY | 1 | |
| A32099-7 | END FITTING ASSY | 1 | |
| A32099-70 | END FITTING ASSY | 1 | |
| A32099-71 | END FITTING ASSY | 1 | |
| A32099-8 | END FITTING ASSY | 1 | |
| A32099-80 | END FITTING ASSY | 1 | |
| A32099-81 | END FITTING ASSY | 1 | |
| A32099-82 | END FITTING ASSY | 1 | |
| A32099-83 | END FITTING ASSY | 1 | |
| A32099-84 | End Fitting Assy | 1 | |
| A32099-85 | End Fitting Assy | 1 | |
| A340-92010-0001 | FITTING ASSY-HINGE ALINGMENT TOOL | 1 | |
| A340-92010-0002 | FITTING ASSY-HINGE ALINGMENT TOOL | 1 | |
| A52004-49 | Fitting Assy - Large Door | 1 | |
| A71008-59 | Sling Equipment, AFT Fitting Assy | 1 | |
| AB27001-Y2I | CLEVIS ASSY (UPPPER FITTING) BALL LOCK PINFIXTURE STRUT THSA | 1 | |
| AN929-3 | ALI CAP ASSY, PRESSURE SEAL FLARED TUBE FITTING | 8 | |
| AN929-3D | ALI CAP ASSY, PRESSURE SEAL FLARED TUBE FITTING | 5 | |
| AN929-4D | ALI CAP ASSY, PRESSURE SEAL FLARED TUBE FITTING | 11 | |
| AN929-4J | CAP ASSY PRESS. SEAL FLARED TUBE FITTING | 23 | |
| AN929-5D | ALI CAP ASSY, PRESSURE SEAL FLARED TUBE FITTING | 10 | |
| AN929-5J | CRES CAP ASSY, PRESSURE SEAL FLARED FITTING | 12 | |
| AN929-6D | ALI CAP ASSY, PRESSURE SEAL FLARED TUBE FITTING | 12 | |
| AN929-6J | CRES CAP ASSY, PRESSURE SEAL FLARED FITTING | 18 | |
| AN929-8D | ALI CAP ASSY, PRESSURE SEAL FLARED TUBE FITTING | 8 | |
| B27066-4 | FITTING ASSY BELONGS TO SLING EQPT-RUDDER (B27066-36) | 1 | |
| B71023-93 | FITTING ASSY (SLING THRUST REVERSER PN B71023-88. THE FITTING ASSY PN B71023-93 ) | 2 | |
| BOF767LS311T4185 | BORING FIXTURE LWR SPAR FITTING ASSY | 1 | |
| BOFAOGTOOL747LG00 | BORING FIXTURE -0 FITTING ASSY-TRUNNION NOSE | 1 | |
| C27034-3 | FITTING ASSY., ELEVATOR REMOVAL | 1 | |
| C27056-4 | LOWER FITTING ASSY | 1 | |
| C27056-5 | UPPER FITTING ASSY | 1 | |
| C54010-27 | ENGINE FITTING ASSY | 1 | |
| C55007-6 | Right fitting assy（green） | 1 | |
| C55007-7 | Left fitting assy（red） | 1 | |
| C71020-26 | ENGINE FITTING PIN ASSY | 2 | |
| C78001-14 | FITTING ASSY HOLD-OPEN | 4 | |
| C78018-51 | Aft Hinge Fitting Assy | 4 | |
| C78048-6 | FWD HINGE FITTING ASSY | 1 | |
| CG9000033-0033 | CENTER FITTING ASSY | 1 | |
| DJ69-31158-1 | DRILL JIG HINGE FITTING ASSY | 1 | |
| F21921 | EXTRACTOR FOR END- FITTING ASSY | 1 | |
| F72714-14 | BEAM ASSY - CENTER ENGINE FITTING | 1 | |
| F72883-10 | Adapter assy set-lubrication fitting，track roller，AFT flap | 3 | |
| F72942-2 | LUBE FITTING ASSY | 1 | |
| F80167-14 | LUBE FITTING ASSY | 1 | |
| F80167-15 | LUBE FITTING ASSY | 2 | |
| F80167-3 | LUBE FITTING ASSY | 8 | |
| F80226 | FITTING ASSY NOSE MOORING | 1 | |
| F80226-1 | Fitting assy-nose mooring | 2 | |
| F80226-2 | FITTING ASSY-NOSE MOORING USED WITH A SUITABLE | 1 | |
| FDOO01-35-42000-000 | To align barrel assy and end fitting (9-250) during assembly | 1 | |
| FIL072105 | Fitting & Cap & wrench assy | 1 | |
| G27036-193 | End Fitting Assy 1 | 1 | |
| G27036-194 | End Fitting Assy 2 | 1 | |
| G27040-4 | Male Fitting Assy | 1 | |
| G27065-19 | Lower fitting assy | 1 | |
| G28018-2 | FITTING ASSY - GE90 | 10 | |
| G28018-31 | FITTING ASSY TRENT800 & 1000 | 1 | |
| G28018-32 | Fitting Assy Genx | 5 | |
| G28018-33 | Fitting assy CF6-80C2/PW4000/GENX-2B | 2 | |
| G28018-61 | Fitting assy trent 1000 | 4 | |
| G28018-65 | Fitting assy CF6-80C2/PW4000/GENX-2B/GE9X | 3 | |
| G28018-7 | FITTING ASSY TRENT 8 | 6 | |
| G36035-18 | FITTING ASSY (PART OF TEST BOX G36035-36) | 5 | |
| G36035-23 | Tee Fitting Assy | 1 | |
| G36035-37 | Filter Fitting Assy | 2 | |
| G36035-38 | FILTER FITTING ASSY | 4 | |
| G36035-40 | Tee Fitting Assy | 1 | |
| G71003-16 | ENG 2 & 3 BRACE FITTING ASSY | 1 | |
| G71003-161 | ENG 1 & 4 UPR ARM SWIVEL FITTING ASSY | 1 | |
| G71003-177 | ENG 2 & 3 UPR INBD ARM FITTING ASSY | 1 | |
| G71003-178 | Upper Outbd Arm Fitting Assy | 1 | |
| G71003-20 | ENG 1 & 4 BRACE FITTING ASSY | 1 | |
| G71003-94 | ENG 2 & 3 OUTBD FITTING ASSY | 1 | |
| G71051-3 | LOAD CELL ASSY UPPER FITTING | 1 | |
| G71051-4 | LOAD CELL ASSY LOWER FITTING | 1 | |
| G78008-79 | Forward Upper Fitting Assy | 1 | |
| GSE55922-203 | FITTING WELD ASSY | 1 | |
| HU39483 | TOOL-FITTING FAN BLADE ASSY | 8 | |
| IL3412-1 | FITTING SAFETY ASSY | 5 | |
| J23001-16 | BASE FITTING ASSY | 1 | |
| J28017-5 | FITTING ASSY, LARGE | 1 | |
| J32037-6 | UPPER FITTING ASSY | 1 | |
| J32037-7 | LOWER FITTING ASSY | 1 | |
| J32037-8 | FITTING ASSY,SIDE STRUT/LOCK LINK | 1 | |
| J32037-93 | UPPER SPRING FITTING ASSY | 3 | |
| J32037-94 | LOWER SPTING FITTING ASSY | 2 | |
| J32037-95 | SPRING END FITTING ASSY | 1 | |
| J32037-96 | ROD END FITTING ASSY | 1 | |
| J32090-10 | END FITTING ASSY | 1 | |
| J32090-12 | End Fitting Assy | 1 | |
| J32090-4 | END FITTING ASSY | 1 | |
| J32090-40 | END FITTING ASSY | 1 | |
| J32090-5 | END FITTING ASSY | 1 | |
| J32090-59 | END FITTING ASSY | 1 | |
| J32090-6 | End Fitting Assy | 1 | |
| J32090-7 | END FITTING ASSY | 1 | |
| J32090-71 | End Fitting Assy | 1 | |
| J32090-8 | END FITTING ASSY | 1 | |
| J52039-9 | ANGLED FITTING ASSY | 1 | |
| J55004-38 | Fitting Assy, Left Side | 1 | |
| J55004-39 | Fitting Assy, Right Side | 1 | |
| J55004-5 | FITTING ASSY,LEFT SIDE | 1 | |
| J55004-6 | FITTING ASSY,RIGHT SIDE | 1 | |
| J71002-32 | LARGE FITTING ASSY | 1 | |
| J71038-71 | GE90-115B fitting assy | 1 | |
| K10003-1 | TETHER FITTING ASSY | 5 | |
| K27044-7 | END FITTING ASSY | 1 | |
| K27044-8 | END FITTING ASSY | 1 | |
| K27046-16 | Lower Fitting Assy | 1 | |
| K52002-103 | End Fitting Assy | 1 | |
| K55001-4 | FITTING ASSY,LEFT SIDE | 1 | |
| K55001-5 | FITTING ASSY,RIGHT SIDE | 1 | |
| K55001-56 | FITTING ASSY,LEFT SIDE | 1 | |
| K55001-57 | FITTING ASSY,RIGHT SIDE | 1 | |
| K78001-51 | Aft LH Hinge Fitting Assy | 1 | |
| K78001-52 | Aft RH Hinge Fitting Assy | 1 | |
| K78001-53 | FWD Hinge Fitting Assy | 1 | |
| K78002-71 | MIDDLE FITTING ASSY | 1 | |
| MIT65C25798-13 | MISCELLANEOUS TOOL HINGE FITTINGS ELEVATOR TAB ASSY | 3 | |
| OHME65B89603-1 | Center Fitting Assy | 1 | |
| OHME65B89603-130 | Fitting Assy - Clevis | 1 | |
| OHME65B89603-131 | Fitting Assy - Clevis | 1 | |
| PWA212464 | ENGINE ASSY, ENGINE ASSY, 90 DEGREE #6 MALE FITTING | 1 | |
| SPL-11830 | Test Fitting Assy | 1 | |
| SPL-11831 | Test Fitting Assy | 1 | |
| TK1814/952-3ASYB | FITTING-NOSE JACK ADPTR-ASSY B | 1 | |
| TSJ65B82591 | TEST FITTING ASSY | 2 | |
| U21989 | TROLLEY FOR MAIN FITTING ASSY | 1 | |
| f 72714-54 | Beam Assy - Center Engine Fitting | 5 | |
| f72714-54 | Beam Assy - Center Engine Fitting | 5 | |
| HU39483 | TOOL‑FITTING FAN BLADE ASSY | 8 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
