| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| SWE 192012 | FAN FIXTURE | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 10C1059G03 | FIXTURE LIFT AND TURN-FAN | 1 | |
| 10C1108G01 | CF34-10 FIXTURE PRELOAD SPACER STG 1 FAN BLADE 195 | 1 | |
| 10C1108G02 | FIXTURE, REMOVE - SPACER STG 1 FAN BLADE, MECHANIC | 4 | |
| 10C1113 | FIXTURE REMOVE SPACERSTAGE 1 FAN BLADE HYDRAULIC | 1 | |
| 10C1113G01 | FIXTURE, REMOVE - FAN BLADE SPACER | 2 | |
| 11C3001 | FIXTURE - MACHINING FAN CASE | 1 | |
| 11C3001G03 | FIXTURE-FAN CASE SHROUD MACHINING (ALT SPL-13736) | 1 | |
| 11C3001G07 | FIXTURE - MACHINING, FAN CASE SHROUD, GENX-1B | 1 | |
| 11C3004P02 | FIXTURE, SHIPPING - FAN STATOR CASE MODULE, HYDRAULIC (DELUXE) | 1 | |
| 11C3004P02-PPK | FIXTURE, SHIPPING - FAN STATOR CASE MODULE, GENX-1B/2B | 1 | |
| 11C3098 | FIXTURE - GUIDE-FWD FAN SHAFT | 1 | |
| 11C3119 | FIXTURE - HANDLING-FORWARD FAN SHAFT | 1 | |
| 11C3199 | FIXTURE - ASSEMBLY LIFT & TURN-FAN STATOR CASE - AFT | 1 | |
| 11C3278 | FIXTURE - PUSH / PULL - LPT AND FAN | 1 | |
| 11C3317 | FIXTURE - SEPARATE-HPC MODULE FROM FAN FRAME | 1 | |
| 11C3406 | FIXTURE, RUNOUT MEASUREMENT-FAN CASE | 1 | |
| 11C3406G04 | FIXTURE-FAN CASE RUN OUT MEASUREMENT (ALTSPL-8372) | 1 | |
| 11C3406G05 | FIXTURE, RUNOUT MEASUREMENT-FAN CASE | 1 | |
| 11C3421 | FIXTURE - INSTALL/REMOVE - FAN SHAFT COVER | 1 | |
| 11C3421G02 | FIXTURE - REMOVAL AND INSTALLATION, FAN SHAFT COVER | 1 | |
| 11C3421G03 | FIXTURE, I/R - FAN SHAFT COVER | 1 | |
| 11C3423 | FIXTURE, TORQU LPT/FAN COUPLING NUT | 1 | |
| 11C3833 | FIXTURE - FAN DISK LIFT & TURN | 1 | |
| 11C4256 | FIXTURE - SEATING-FAN SHAFT SPEED SENSOR | 1 | |
| 11C4256G02 | FIXTURE, SEATING - FAN SHAFT SPEED SENSOR | 1 | |
| 11C4259 | FIXTURE - SEATING-FAN SHAFT EXTENSION | 1 | |
| 11C4259G01 | FIXTURE, SEATING - FAN SHAFT EXTENSION | 1 | |
| 11C4260 | FIXTURE - LIFT & TURN-FWD FAN SHAFT & NO 2 BEARING | 1 | |
| 11C4260G02 | FIXTURE, LIFT/TURN - FORWARD FAN SHAFT AND NO. 2 BEARING | 1 | |
| 11C4262 | FIXTURE, LIFT & TURN FWD FAN SHAFT & NO 2 BEARING | 1 | |
| 11C4265 | FIXTURE - TORQUE - LP TURBINE /FAN COUPLING NUT | 1 | |
| 11C4271 | FIXTURE - INSTALL/REMOVE - SHAFT MID FAN | 1 | |
| 11C4307G03 | FIXTURE - RUNOUT MEASUREMENT, FAN CASE | 1 | |
| 11C4307G04 | FIXTURE，RUNOUT MEASUREMENT-FAN CASE | 1 | |
| 11C4376 | FIXTURE, BRACKET SET, FAN HUB FRAME | 1 | |
| 11C4439 | FIXTURE - LIFT & TURN - AFT FAN STATOR CASE ASSY | 1 | |
| 11C4490P02 | FAN STATOR SEPERATION FIXTURE GENX-1B | 1 | |
| 11C4572P01 | FIXTURE, SHIPPING - FAN STATOR CASE MODULE, TWO CRANE TIPPABLE | 1 | |
| 11C4588P01 | FIXTURE-SHIPPING, FAN STATOR CASE MODULE | 1 | |
| 11C4594G02 | FIXTURE, FAN BLADE TRANSPORTION CAROUSEL | 1 | |
| 11C4645 | FIXTURE, SPREAD FAN BLADE | 1 | |
| 11C4645G01 | Fixture - Fan Blade Spreader | 3 | |
| 11C4654G01 | FIXTURE-FAN BLADE SPREADER (SPL-12466) | 1 | |
| 11C4881 | FIXTURE, HANDLING-FWD FAN SHAFT | 1 | |
| 11C4881G01 | FIXTURE, HANDLING - FORWARD FAN SHAFT | 1 | |
| 17G230022-1 | TR FAN DUCT HOLDING FIXTURE | 1 | |
| 18C1310 | FIXTURE,CG-FAN CASE | 1 | |
| 18C1314 | LIFT, FIXTURE - CORE COWL / FAN COWL | 1 | |
| 18C1316 | FIXTURE, MACHINING - FAN | 1 | |
| 18C1342 | FIXTURE, LIFT/TURN - FAN BLISK | 1 | |
| 18C1500 | FIXTURE, LIFT/TURN - FAN BLISK | 1 | |
| 1C9343 | FIXTURE ASSY, PULLER-FWD FAN MID SHAFT | 1 | |
| 2040156-0501 | ADFANTENNAHOLDERFIXTURE | 1 | |
| 21C11423G01 | FIXTURE ASSEMBLY STAGE 1 FAN BLADE | 1 | |
| 21C8104G01 | FIXTURE FAN VARIABLE GEOMETRY SETTING | 1 | |
| 21C8138G01 | FIXTURE STAGE 1 FAN BLADE | 1 | |
| 21C8278G01 | FIXTURE FAN MODULE INSPECTION | 1 | |
| 21C878G | FIXTURE FAN MODULE INSPECTIO | 1 | |
| 21C878G01 | FIXTURE FAN MODULE INSPECTION | 1 | |
| 274058-1-1 | MOTOR DRIVEN FAN TEST FIXTURE | 1 | |
| 289768-4 | FAN SHAFT STRETCHING FIXTURE ( | 1 | |
| 293002-1 | FAN SHAFT STRETCHING FIXTURE | 1 | |
| 293002-3 | FAN SHAFT STRETCHING FIXTURE (WITH CYLINDER AND PUMP) | 1 | |
| 298107-1 | FAN SUPPORT HOIST FIXTURE | 1 | |
| 2C14131G01 | FIXTURE, SEATING CHECK - HPTR (WITH FAN AND MID SHAFT OUT - VERTICAL) | 1 | |
| 2C14131G02 | FIXTURE, SEATING CHECK - HPTR (WITH FAN AND MID SHAFT INSTALL) | 4 | |
| 2C14620G01 | FIXTURE, LIFT/TURN ‐ FAN BOOSTER, ROTOR FWD | 1 | |
| 2C14629 | FIXTURE, LIFT/ROTATION- FAN MAINT. UNIT | 1 | |
| 2C14629 REV C | FIXTURE, LIFT/ROTATION- FAN MAINT. UNIT | 1 | |
| 2C14629G01 | FIXTURE, LIFT, FAN ROTATION | 1 | |
| 2C14629G02 | FIXTURE LIFT & ROTATE FAN FRAME | 1 | |
| 2C14630G02 | FIXTURE,PRELOAD-STAGE 1 FAN BLADE SPAC | 1 | |
| 2C14633G01 | FIXTURE, LIFT/TURN ‐ FAN ROTOR, AFT | 1 | |
| 2C14633G03 | FIXTURE, LIFT/TURN - AFT FAN BOOSTER ROTOR | 1 | |
| 2C14722 | FIXTURE, RUNOUT - FAN STATOR | 2 | |
| 2C14722 REV A | FIXTURE, RUNOUT-FAN STATOR, ASSEMBLED ENGINE | 1 | |
| 2C14722G01 | RUNOUT FIXTURE FAN S | 3 | |
| 2C14722G01TK | FIXTURE, RUNOUT-FAN STATOR ASSEMBLED ENGINE | 1 | |
| 2C14736 | FIXTURE, LIFT-FAN MAINT. UNIT | 1 | |
| 2C14736 REV J | FIXTURE, LIFT-FAN MAINT. UNIT | 1 | |
| 2C14736G01 | FIXTURE, LIFT - FAN MAINTENANCE UNIT | 1 | |
| 2C14736G02 | FIXTURE LIFT FAN MAINTENANCE UNIT | 2 | |
| 2C14751G01 | FIXTURE, LIFT - FAN | 3 | |
| 2C14773 | FIXTURE, INSTALL/REMOVE - STG 1 FAN DISK NUTS | 1 | |
| 2C14930G01 | FIXTURE, LIFT AND TURN ‐ FAN ROTOR ASSEMBLY | 1 | |
| 2C14974G02 | FIXTURE RUNOUT - FAN STATOR, ASSEMBLED ENGINE | 2 | |
| 2C15629 | INSPECTION FIXTURE, FAN BLADES STAGE 1 | 1 | |
| 2C18012 | FIXTURE, PRELOAD - SPACER, STAGE 1 FAN BLADE | 2 | |
| 2C18012G01 | FIXTURE PRELOAD-SPACER STAGE 1 FAN BLADE | 2 | |
| 2C18012G02 | FIXTURE PRELOAD-SPACER STAGE 1 FAN BLADE | 6 | |
| 2C18012GO2 | FIXTURE, PRELOAD - SPACER, STAGE 1 FAN BLADE | 6 | |
| 2C18051 | FIXTURE RUNOUT - FAN STATOR, ASSEMBLED ENGINE | 1 | |
| 2C18051G01 | FIXTURE RUNOUT - FAN STATOR, ASSEMBLED ENGINE | 1 | |
| 2C18062G01 | FIXTURE,INTALLREMOVE-LPT MODFAN FWD SFT | 1 | |
| 2C18062G02 | FIXTURE, INSTALL/REMOVE - LPT MODULE/FAN FORWARD SHAFT (FIXTURE) | 1 | |
| 2C5212G01 | FIXTURE - FAN CASING | 1 | |
| 2C5660G01 | FIXTURE - FAN ROTOR | 1 | |
| 2C5699 | FIXTURE, AFT FAN SPINNER | 1 | |
| 2C5699G01 | Fixture, Aft Fan Spinner Support | 1 | |
| 2C5720G01 | FIXTURE - FAN BLADES | 1 | |
| 2C5721G01 | FIXTURE - FAN BLADES | 1 | |
| 2C5722G01 | FIXTURE - FAN DISK | 1 | |
| 2C5723G01 | FIXTURE - FAN DISK | 1 | |
| 2C6090G03 | FIXTURE- INST/RML RETAINING RING FAN S | 1 | |
| 2C6100G02 | Fixture, Lift Fan | 1 | |
| 2C6122 | FIXTURE,R/I-FWD FAN SHAFT BOLTS | 1 | |
| 2C6122 REV G | FIXTURE, INSTALL & REMOVAL - BOLTS, FWD FAN SHAFT | 1 | |
| 2C6122G01 | FIXTURE,R/I-FWD FAN SHAFT BOLTS | 1 | |
| 2C6122G02 | FIXTURE,R/I-FWD FAN SHAFT BOLTS | 1 | |
| 2C6122G03 | FIXTURE REMOVEL/INSTALL BOLTS FWD FAN SHAFT | 1 | |
| 2C6145 | FIXTURE, CONCENTRICITY-FAN FRAME, NO. 3 BRG. SEALS | 1 | |
| 2C6145 REV H | FIXTURE, CONCENTRICITY-FAN FRAME, NO. 3 BRG. SEALS | 1 | |
| 2C6179 | FIXTURE, INSP. - FAN MID & FAN RTR FWD SHAFT | 1 | |
| 2C6179 REV J | FIXTURE, INSP. - FAN MID & FAN RTR FWD SHAFT | 1 | |
| 2C6269 | FIXTURE INSTALL REMOVE-SPACER STAGE 1 FAN BLADE | 1 | |
| 2C6343 | FIXTURE, LIFT/ROTATION - FAN MAINTENANCE UNIT | 1 | |
| 2C6343 REV C | FIXTURE, LIFT/ROTATION - FAN MAINTENANCE UNIT | 1 | |
| 2C6350 | FIXTURE, LIFT/TURN FAN MODULE | 1 | |
| 2C6350 REV E | FIXTURE, LIFT/TURN FAN MODULE | 1 | |
| 2C6350G03 | FIXTURE LIFT FAN FRAME AFT | 1 | |
| 2C6350G04 | FIXTURE, LIFT - FAN FRAME, AFT | 1 | |
| 2C6376G03 | LIFT FIXTURE FWD FAN SHAF | 1 | |
| 2C6838G01 | LIFT FIXTURE, FAN DISK | 1 | |
| 2C6838G01TK | FIXTURE, LIFT-FAN ROTOR DISKS | 1 | |
| 2C6856 | FIXTURE, LIFT - FAN ROTOR SUBASSEMBLY | 2 | |
| 2C6856 REV G | FIXTURE, FAN ROTOR SUB-ASSY | 1 | |
| 2C6856G03 | LIFT FIXTURE - FAN ROTOR SUBASSEMBLY | 1 | |
| 2C6856G04 | Fixture, Lift - Fan Rotor Sub-Assembly | 3 | |
| 2C6856G04 | LIFT FIXTURE FAN ROTOR | 3 | |
| 2C6916G01 | FIXTURE CUTTER STAGE 1 FAN SHROUD | 1 | |
| 2C6934G03 | A SUMP FAN FRAME FIXTURE LEAK CHECK | 1 | |
| 2C6934G04-AF | FIXTURE,LEAK CHECK-A SUMP, FAN FRAME | 1 | |
| 2C6951G01 | FIXTURE - RUNOUT, FAN ROTOR ASSEMBLED ENGINE | 2 | |
| 2C6987G03 | FIXTURE, RUNOUT – FAN STATOR CASE | 1 | |
| 2C6I45 | FIXTURE, CONCENTRICITY-FAN FRAME, NO. 3 BRG. SEALS | 1 | |
| 2C6I79 | FIXTURE, INSP. - FAN MID & FAN RTR FWD SHAFT | 1 | |
| 2C7399 | FIXTURE, HOLDING - FAN BLADE STG. 1 | 1 | |
| 2C7399 REV C | FIXTURE, HOLDING - FAN BLADE STG. I | 1 | |
| 2C7546G11 | FIXTURE - FAN BLADE LEADING EDGE, 60 HZ | 1 | |
| 2C7546G12 | FIXTURE - FAN BLADE LEADING EDGE, 50 HZ | 1 | |
| 2C8008 | FIXTURE, REMOVAL - FAN STATOR FAIRING | 1 | |
| 2C8008 REV A | FIXTURE, REMOVAL - FAIRING, FAN STATOR | 1 | |
| 2C8008G01 | Fixture, Remove - Fan Stator Fairing | 4 | |
| 2C8008G01TK | FIXTURE, REMOVAL-FAIRING, FAN STATOR | 1 | |
| 2C8072 | FIXTURE, PRELOAD-SPACER STAGE 1 FAN BLADE 1 | 1 | |
| 2C8073 | FIXTURE,PRELOAD-SPACER STAGE 1 FAN BLADE | 2 | |
| 2C8073 REV G | FIXTURE, PRELOAD SPACER STG. I FAN BLADE | 1 | |
| 2C8073G01 | FIXTURE,PRELOAD-SPACER STG FAN BLADES | 2 | |
| 2C8073G01TK | FIXTURE, PRELAND-SPACER STG.1 FAN BLADE | 1 | |
| 2C8073G02 | FIXTURE,PRELOAD-SPACER STAGE 1 FAN BLADE | 1 | |
| 2C8073G03 | FIXTURE,PRELOAD-SPACER STAGE 1 FAN BLADE | 1 | |
| 2C8073G04 | FIXTURE,PRELOAD-SPACER STAGE 1 FAN BLADE | 7 | |
| 2C8073G05 | FIXTURE,PRELOAD-SPACER STAGE 1 FAN BLADE | 13 | |
| 2C81029 | FIXTURE, LOADING FAN DRIVE SH | 1 | |
| 2C81029G01 | FIXTURE, FAN ROTOR LOAD | 1 | |
| 2C91137G01 | FIXTURE-HOLDING FAN DISK | 1 | |
| 2C91250G01 | FIXTURE, FAN ROTOR RUNOUT | 1 | |
| 2C91297G01 | FIXTURE - MACHINING - FAN DISK | 1 | |
| 2R1050G01 | FIXTURE, SHOT PEEN DOVETAIL, STAGE 1 FAN ROTOR DISK (PEEN FIXTURE) | 1 | |
| 2R1120 | FIXTURE, DOVETAIL MACHIN. STAGE 1 ROTOR FAN BLADE | 1 | |
| 2RII20 | FIXTURE, DOVETAIL MACHIN. STAGE I ROTOR FAN BLADE | 1 | |
| 846-504-400 | FIXTURE – FAN RETAINING FLANGE | 1 | |
| 856A2314G05 | MACHINING FIXTURE - FAN FRAME | 1 | |
| 856A2323 | FIXTURE, ASSY / DISASSY FAN AND BOOSTER | 1 | |
| 856A2323G01 | FIXTURE, ASSEMBLY/DISASSEMBLY - FAN AND BOOSTER (ASSEMBLY/DISASSEMBLY FIXTURE) | 1 | |
| 856A2423G01 | FIXTURE, TORQUE FAN DISK COUPLING BOLT (FIXTURE) OPTIONAL | 1 | |
| 856A2427G01 | COUNTERWEIGHT FIXTURE - FAN BLADE | 1 | |
| 856A2667 | AD2 RUNOUT CHECKING FIXTURE - FAN MAJOR | 1 | |
| 856A2667G01 | AD2 RUNOUT CHECKING FIXTURE - FAN MAJOR | 1 | |
| 856A2667G02 | AD2 RUNOUT CHECKING FIXTURE - FAN MAJOR | 1 | |
| 856A2667G03 | AD2 RUNOUT CHECKING FIXTURE - FAN MAJOR | 1 | |
| 856A2667G04 | AD2 RUNOUT CHECKING FIXTURE - FAN MAJOR | 8 | |
| 856A2667G05 | AD2 RUNOUT CHECKING FIXTURE - FAN | 1 | |
| 856A2667G06 | AD2 RUNOUT CHECKING FIXTURE - FAN MAJOR | 7 | |
| 856A2693G01 | ASSY/DISASSY FIXTURE SUPPORT - FAN | 1 | |
| 856A2693G02 | Fixture, Support - Table Booster A/D Fan Disk | 4 | |
| 856A2693G03 | ASSY/DISASSY FIXTURE SUPPORT - FAN DISK | 1 | |
| 856A2705G02 | FIXTURE, HANDLING - FAN AND BOOSTER MODULE (HANDLING FIXTURE) | 3 | |
| 856A2720G01 | FIXTURE STRIP FAN CASTING | 1 | |
| 856A2720P49 | MACHINING FIXTURE - FAN FRAME | 1 | |
| 856A2770G02 | HANDLING FIXTURE - FAN DISK | 1 | |
| 856A2770G03 | HANDLING FIXTURE - FAN DISK & BOOSTER SPOOL | 1 | |
| 856A2779 | FIXTURE, LIFT & TURN FAN FRAME/FAN MAJOR MODULE | 1 | |
| 856A2779 REV C | FIXTURE, LIFT & TURN FAN FRAME/FAN MAJOR MODULE | 1 | |
| 856A2779G02 | FIXTURE, LIFT AND TURN - FAN FRAME/FAN MAJOR MODULE (LIFT AND TURN FIXTURE) | 1 | |
| 856A2779G03 | FIXTURE LIFT&TURN FAN FRAME/FAN MAJOR MODULE | 1 | |
| 856A2779G04 | LIFTING & TURNING FIXTURE - FAN | 3 | |
| 856A2822G02 | FIXTURE, LIFT AND TURN - FAN FRAME | 2 | |
| 856A2907G01 | FIXTURE, MACHINING - ABRADABLE STRIP FAN CASING (MACHINING FIXTURE) | 1 | |
| 856A2907G04 | MACHINING FIXTURE - FAN FRAME ABRADABLE LINER | 1 | |
| 856A2907G05 | MACHINING FIXTURE - FAN FRAME | 2 | |
| 856A2910G03 | HANDLING FIXTURE - FAN DISK | 3 | |
| 856A2912 | FIXTURE, ASSEMBLY/DISASSEMBLY - FAN BOOSTER (DISK SUPPORT) | 1 | |
| 856A2912G01 | Fixture, Assembly/Disassembly - Fan Booster (disk support) | 1 | |
| 856A2912G02 | ASSY/DISASSY FIXTURE - FAN & BOOSTER | 5 | |
| 856A2951G01 | COUNTERWEIGHT FIXTURE - FAN BLADE | 2 | |
| 856A3249 | FIXTURE, HANDLING - FAN DISK | 1 | |
| 856A3494G02 | ENGINE SUPPORT FIXTURE (FAN SHROUD REPL WITH SP 009) | 2 | |
| 856A3495G01 | FORWARD FIXTURE (FAN SHROUD REPL WITH SP 009) | 2 | |
| 856A3496G05 | REAR FIXTURE (FAN SHROUD REPL WITH SP 009) | 2 | |
| 856A3532G02 | FIXTURE, LIFT AND TURN-FAN FRAME ASSEMBLY | 1 | |
| 856A3538 G02 | Handling Fixture, Fan Disk | 1 | |
| 856A3538G02 | HANDELING FIXTURE,FAN DISK | 1 | |
| 856A3538G03 | HANDLING FIXTURE - FAN DISK | 1 | |
| 856A3580 | FIXTURE, MACHINING - FAN CASING ABRADABLE STRIP | 1 | |
| 856A3608G03 | AXIAL LOADING FIXTURE - FAN FRAME | 1 | |
| 856A3710G03 | FAN FRAME LIFTING FIXTURE | 8 | |
| 856A3711 | LIFT & TURN FIXTURE FAN FRAME | 1 | |
| 856A3711G02 | Fixture Lift & Turn Fan Frame | 1 | |
| 856A3711G03 | LIFT & TURN FIXTURE - FAN FRAME | 3 | |
| 856A3713G01 | Fixture Lift/Turn Strut Fan Frame | 2 | |
| 856A3724G01 | FAN DISK RUN-ON FIXTURE | 1 | |
| 856A3724G02 | FAN DISK RUN-ON FIXTURE | 8 | |
| 856A3731 | FIXTURE, HANDLING - FAN DISK | 1 | |
| 856A3731G01 | Fixture Handle Fan Disk | 3 | |
| 856A3731G02 | FIXTURE, HANDLING - FAN DISK | 2 | |
| 856A3731G03 | FIXTURE, HANDLING - FAN DISK | 6 | |
| 856A3769G01 | Fixture, Handling Pivoting-Fan Frame & Case | 1 | |
| 856A3769G02 | TURNOVER FIXTURE - FAN MAJOR | 1 | |
| 856A3902G03 | FIXTURE, ASSY/DISASSY FAN | 3 | |
| 856A3904 | FIXTURE, LIFT AND TURN - FAN FRAME/FAN MAJOR MODULE | 1 | |
| 856A3904G01 | FIXTURE, LIFT & TURN FAN FRAME/ | 1 | |
| 856A3904G03 | LIFT & TURN FIXTURE - FAN FRAME / | 6 | |
| 856A3906 | FIXTURE TORQUE FAN DISK COUPLING | 1 | |
| 856A3906G01 | FIXTURE TORQUE FAN DISK COUPLING | 10 | |
| 856A3916 | FIXTURE SUPPORT TABLE BOOSTER A / D DISK FAN | 1 | |
| 856A3916G01 | FIXTURE SUPPORT TABLE BOOSTER A / D DISK FAN | 2 | |
| 856A3916G02 | FIXTURE SUPPORT TABLE BOOSTER A / D DISK FAN | 9 | |
| 856A3940G01 | RECONDITIONING FIXTURE - FAN FRAME | 1 | |
| 856A3949G01 | RECONDITIONING FIXTURE - FAN FRAME ABRADABLE LINER | 1 | |
| 856A3950G01 | CARTRIDGE - FILM, RECONDITIONING FIXTURE, FAN FRAME ABRADABLE | 1 | |
| 856A4611 | FIXTURE CHECKING FAN BLADE | 1 | |
| 856A4611G01 | DIM INSP FIXTURE - FAN BLADE | 1 | |
| 856A4611G02 | DIM INSP FIXTURE - FAN BLADE | 1 | |
| 856A4624 | SCOURING FIXTURE - FAN FRAME STRIP | 1 | |
| 856A4624G01 | FIXTURE, SCOURING ABRADABLE STRIP FAN CASE | 1 | |
| 856A4624G02 | SCOURING FIXTURE - FAN FRAME STRIP | 1 | |
| 856A4624G03 | SCOURING FIXTURE - FAN FRAME STRIP | 5 | |
| 856A4643G01 | V-GROOVE FIXTURE BONDING THERMAL - FAN FRAME | 1 | |
| 856A4647G01 | FIXTURE, LIFT AND TURN - FAN FRAME | 2 | |
| 856A4706G01 | FIXTURE, HOLDING -FAN BLADE | 1 | |
| 856A4706G02 | FIXTURE, HOLDING -FAN BLADE | 1 | |
| 856A5569G01 | TIP NOTCH GRINDING FIXTURE - FAN BLADE | 1 | |
| 856A5574G01 | CHECKING FIXTURE - FAN BLADE | 1 | |
| 856A5621G01 | CHECKING FIXTURE - FAN BLADE | 1 | |
| 856A5645G01 | FIXTURE, ALIGNMENT - FAN FRAME RADIAL DRIVE SHAFT INNER/OUTERHOUSING | 1 | |
| 856A5809 | INFLATABLE PRESSURE FIXTURE - FAN FRAME ABRADABLE LINER | 1 | |
| 856A5911G01 | CHECKING FIXTURE - FAN BLADE | 1 | |
| 856A5919G01 | MATING FACES MILLING FIXTURE - FAN | 1 | |
| 856A5940 | HANDLING & LIFTING FIXTURE - FAN FRAME | 1 | |
| 856A5940G01 | HANDLING & LIFTING FIXTURE - FAN | 3 | |
| 856A5947G01 | FIXTURE, HOLDING –FAN BLADE | 1 | |
| 856A5947G02 | FIXTURE, HOLDING -FAN BLADE | 1 | |
| 856A6615 | FIXTURE, INSP.-FAN BLADE ROOT DOVETAIL | 1 | |
| 856A6615 REV A | FIXTURE, INSP.-FAN BLADE ROOT DOVETAIL | 1 | |
| 856A6615G01 | FIXTURE-FAN BLADE ROOT DOVETAIL | 4 | |
| 856A6617G01 | FIXTURE, FAN BLADE | 1 | |
| 856A6617G02 | FIXTURE, FAN BLADE | 1 | |
| 856A6617G04 | FIXTURE, FAN BLADE | 1 | |
| 856A6617G05 | FIXTURE, FAN BLADE | 1 | |
| 856A6617G06 | FIXTURE, FAN BLADE | 1 | |
| 856A6623 | INFLATABLE PRESSURE FIXTURE - FAN FRAME ABRADABLE LINER | 1 | |
| 856A6761 | FIXTURE INSP.-FAN BLADE ROOT DOVETAIL | 2 | |
| 856A6761 REV A | FIXTURE INSP.-FAN BLADE ROOT DOVETAIL | 1 | |
| 856A6761G01 | FIXTURE-FAN BLADE ROOT DOVETAIL | 1 | |
| 8C2315 | FIXTURE - RUNOUT - FAN CASE | 1 | |
| 8C2316 | FIXTURE - GRIND - STG 1 FAN CASE SHROUD | 1 | |
| 8C2405 | FIXTURE, PUSH/PULL-LOW PRESSURE TURBINE MODULE & FAN MODULE | 1 | |
| 8C2437 | FIXTURE, TORQUE- LPT/FAN | 1 | |
| 8C2520 | FIXTURE, REMOVE - KEYED RING, FAN SHAFT | 1 | |
| 8C2534 | FIXTURE, HANDLING - FORWARD FAN SHAFT | 1 | |
| 8C2538 | FIXTURE SEATING - FAN SHAFT EXTENSION | 1 | |
| 8C2542 | FIXTURE - GUIDE - FORWARD FAN SHAFT | 1 | |
| 8C2544 | FIXTURE, SEATING - FAN SHAFT SPEED SENSOR | 1 | |
| 8C2615 | FIXTURE, INSTALL/REMOVE-FAN BLADE | 1 | |
| 8C2906 | FIXTURE, ALIGNMENT - NUT, FAN SHAFT EXT | 1 | |
| 8C2908 | FIXTURE, SUPPORT - FWD FAN SHAFT | 1 | |
| 8C2910 | FIXTURE, LIFT & TURN - FWD FAN SHAFT, FWD END | 1 | |
| 8C2914 | FIXTURE - CHILL - FWD FAN SHAFT | 1 | |
| 8C3261 | FIXTURE - LIFT - FAN FRAME ASSY *(FHF VERTICAL) | 1 | |
| 8C3262 | FIXTURE - STORAGE - FAN HUB FRAME | 1 | |
| 8C4109 | FIXTURE - FORWARD LIFTING - FAN DISK | 1 | |
| 8C4110 | FIXTURE - LIFTING AND TURNING - FAN DISK | 1 | |
| 8C4113 | FIXTURE - REMOVE - FAN DISK - SPOOL | 1 | |
| 9400M95 | FIXTURE, LIFT-LPT MID FAN SHAFT | 1 | |
| 956A1305 | FIXTURE - LIFT - FAN ASSEMBLY | 1 | |
| 956A6003 | FIXTURE - TRUNNION - FAN CASE | 1 | |
| 956A6019 | FIXTURE - REMOVAL - IGB DAMPER - HUB FAN FRAME | 1 | |
| 956A6032 | FIXTURE - CHECK ALIGNMENT - NUT - FAN & BOOSTER | 1 | |
| 956A6038 | FIXTURE - LIFT VARIABLE CG - FAN AND BOOSTER | 1 | |
| 956A6040 | FIXTURE -REMOVE-FAN AND BOOSTER | 1 | |
| 956A6053 | FIXTURE - LIFT AND TURN - HANDLE AND GUIDE - FAN CASE | 1 | |
| 956A6061 | FIXTURE - ROTATION LOCK & DRIVE - FAN BLADE DISK | 1 | |
| 956A6063 | FIXTURE - REMOVE - SPACER - FAN DISK | 1 | |
| 956A6063G01 | FIXTURE, REMOVE - SPACER, FAN DISK | 1 | |
| 956A6063G02 | FIXTURE FAN DISK | 3 | |
| 956A6063G02 | FIXTURE REMOVE SPACER FAN BLADE | 3 | |
| 956A6063G03 | FIXTURE, REMOVE - SPACER, FAN DISK | 2 | |
| 956A6063G04 | FIXTURE, REMOVE -SPACER, FAN DISK | 4 | |
| 956A6065 | FIXTURE - REMOVE - SPACER - FAN DISK | 1 | |
| 956A6065G01 | FIXTURE, REMOVE - SPACER, FAN DISK | 2 | |
| 956A6071G01 | FIXTURE, GUIDE - NUT, BARREL, FAN DISK | 7 | |
| 956A6074G01 | FIXTURE HANDLING FAN CASE LEAP 1A | 1 | |
| 956A6075G01 | FIXTURE, SHIPPING - FAN STATOR CASE MODULE, LEAP-1 | 1 | |
| 956A6084 | FIXTURE - GUIDE INSTALLATION - FAN CASE | 1 | |
| 956A6086 | FIXTURE - DIMENSION CHECK - FAN HUB | 1 | |
| 956A6100 | FIXTURE - LIFT - FAN HUB | 1 | |
| 956A6101 | FIXTURE - LUG - BUILT STAND - FAN HUB | 1 | |
| 956A6102 | FIXTURE - ASSEMBLY STAND - FAN HUB | 1 | |
| 956A6118 | FIXTURE - LUG - FAN SHROUD ASSY | 1 | |
| 956A6128 | FIXTURE - REMOVE - OIL SUPPLY - FAN HUB | 1 | |
| 956A6138 | FIXTURE - GUIDE PIN - ARM 8 O'CLOCK & FAN SHROUD | 1 | |
| 956A6148 | FIXTURE - GUIDE PIN - FAN SHROUD & FAN HUB | 1 | |
| 956A6637G02 | FIXTURE, REMOVAL/INSTALLATION FAN SPINNER | 3 | |
| 956A6861 | FIXTURE - LIFTING - FAN DISK | 1 | |
| 956A6865 | FIXTURE - REMOVE - FAN DISK - SPOOL | 1 | |
| 956A8000 | FIXTURE - STAND - FAN ASSY | 1 | |
| 956A8001 | FIXTURE - LIFTING AND POSITIONNING - SHROUD FAN FRAME | 1 | |
| 956A8011 | FIXTURE - LIFT - FAN CASE & FAN FRAME | 1 | |
| 956A8017 | FIXTURE - LIFT - FAN ASSEMBLY | 1 | |
| 956A8041 | FIXTURE - LUG-BUILT STAND - FAN HUB | 1 | |
| 956A8051 | FIXTURE - REMOVE - SPACER - FAN BLADE | 1 | |
| 956A8051G02 | Fixture,remove-fan blade spacer | 6 | |
| 956A8052 | FIXTURE - RESTRAIN - PLATFORM - FAN BLADE | 1 | |
| 956A8054 | FIXTURE - INSTALL - SHROUD - FAN FRAME | 1 | |
| 956A8056 | FIXTURE - INSTALL - SHROUD - FAN FRAME | 1 | |
| 956A8065 | FIXTURE - PUSHER - DISK FAN | 1 | |
| 956A8085 | FIXTURE - EXTENSION PIN AND SPHERICAL JOINT - FAN CASE | 1 | |
| 956A8085G01 | FIXTURE, EXTENSION PIN AND SPHERICAL JOINT - FAN ASSY | 1 | |
| 956A8085G02 | FIXTURE, EXTENSION PIN AND SPHERICAL JOINT - FAN A | 2 | |
| 956A8093 | FIXTURE - EXTENSION PIN AND SPHERICAL JOINT-FAN ASSY | 1 | |
| 956A8093G01 | FIXTURE, EXTENSION PIN AND SPHERICAL JOINT - FAN CASE | 2 | |
| 956A8134 | FIXTURE - LIFTING - FAN BOOSTER - STAGE 4 | 1 | |
| 956A8167 | FIXTURE - LIFT AND TURN - HUB FAN FRAME | 1 | |
| 956A8168 | FIXTURE - LIFT - FAN FRAME | 1 | |
| 956A8592G01 | Fixture,lift and turn-fan hub | 1 | |
| 956A8811 | FIXTURE - LIFTING - 1 & 2 BEARING SUPPORT/FAN & BOOSTER ASSY | 1 | |
| 956A8850 | FIXTURE - ASSY/DIASSY - FAN & BOOSTER ASSY | 1 | |
| 956A8851 | FIXTURE - LIFT AND TURN - FAN & BOOSTER ASSY | 1 | |
| 956A8863 | FIXTURE - REMOVE - FAN DISK - SPOOL | 1 | |
| 98A71101502000 | HOLD-OPEN FIXTURE - 55 PW FAN COWL | 8 | |
| 98A71101502001 | HOLD-OPEN FIXTURE - 55 PW FAN COWL | 1 | |
| 98A71101502002 | HOLD-OPEN FIXTURE - 55 PW FAN COWL | 1 | |
| 98A71103509000 | FAN COWL HOLD OPEN FIXTURE TOOL | 2 | |
| 98A71103511 | FAN COWL HOLD OPEN FIXTURE | 1 | |
| 98A71103511000 | FAN COWL HOLD-OPEN FIXTURE | 5 | |
| 98A71103511001 | FAN COWL HOLD-OPEN FIXTURE LH | 1 | |
| 98A71103511002 | FAN COWL HOLD-OPEN FIXTURE RH | 1 | |
| 9C1147 | FIXTURE, LIFT - FAN MODULE | 1 | |
| 9C1147G01 | FIXTURE, LIFT - FAN MODULE | 1 | |
| 9C1147G02 | FIXTURE, LIFT - FAN MODULE | 1 | |
| 9C1147G03 | FIXTURE, LIFT - FAN MODULE | 1 | |
| 9C1147G04 | FIXTURE, LIFT - FAN MODULE | 1 | |
| 9C1322G02 | FIXTURE - FAN CASE RUNOUT (GE90 ONLY) | 1 | |
| 9C1322G03 | FIXTURE, RUNOUT MEASUREMENT-FAN CASE | 1 | |
| 9C1335 | FIXTURE,ASSEMBLY AFT FAN CASE | 1 | |
| 9C1335G02 | FIXTURE, ASSEMBLY AFT FAN CASE | 1 | |
| 9C1336 | FIXTURE,ASSEMBLY AFT FAN CASE | 1 | |
| 9C1361 | FIXTURE, INSTALL/REMOVE FAN | 1 | |
| 9C1361G01 | FIXTURE, REMOVAL/INSTALLATION SPINNER, FAN ROTOR (FIXTURE) | 1 | |
| 9C1361G01 | FIXTURE, R/I - FAN ROTOR SPINNER | 1 | |
| 9C1381G01 | FIXTURE, LIFT AND TURN - FWD FAN CASE MODULE | 1 | |
| 9C1863 | FIXTURE, LIFT-SHAFT MID FAN | 1 | |
| 9C301G01 | FIXTURE FAN CASE RUNOUT | 1 | |
| 9C3032 | FIXTURE/FWD LIFT TURN FAN HUB | 1 | |
| 9C3036 | FIXTURE - R/I-SPINNER FAN | 1 | |
| 9C3036G01 | FIXTURE RMVL-SPINNER FAN ROTOR | 2 | |
| 9C3036G02 | Fixture - Removal/Installation, Fan Rotor Spinner | 1 | |
| 9C3039 | FIXTURE, RUNOUT MEASUREMENT - FAN CASE | 1 | |
| 9C3039G01 | FAN CASE FIXTURE RUN OUT | 1 | |
| 9C3048 | FIXTURE,GUIDE-FAN FORWARD SHAFT ASSEMBLY | 1 | |
| 9C3049 | FIXTURE, INSTALL GUIDE FAN HUB ASSY | 1 | |
| 9C3129 | FIXTURE - SPREAD-FAN BLADE | 1 | |
| 9C3129G01 | FIXTURE SPREAD FAN BLADE | 1 | |
| 9C3129G01 | FIXTURE, SPREAD-FAN BLADE | 1 | |
| 9C3144 | FIXTURE, INSTALLATION ASSEMBLY FAN STATOR | 1 | |
| 9C3144G01 | FIXTURE INSTALLATION ASSEMBLE FAN STATOR | 1 | |
| 9C3159 | FIXTURE, LIFT/TURN FAN STATOR ASSY, AFT | 1 | |
| 9C3159G01 | FIXTURE LIFT AND TURN FAN STATOR ASY AFT | 1 | |
| 9C33036G01 | FIXTURE, REMOVAL-FAN ROTOR SPINNER | 1 | |
| 9C3408 | FIXTURE, LIFT/TURN FAN STATOR ASSY, AFT | 1 | |
| 9C3408G01 | FIXTURE LIFT TURN FAN | 1 | |
| 9C3420G01 | AFT FAN CASE DRILL FIXTURE KIT | 1 | |
| 9C6003 | FIXTURE - SHIPPING FAN STATOR CASE MODULE | 1 | |
| 9C6003P01 | FIXTURE, SHIPPING - FAN STATOR CASE MODULE | 1 | |
| 9C6003P01-PPK | FAN STATOR SHIP FIXTURE, GE90 | 1 | |
| 9C6015 | FIXTURE SHIPPING FAN STATOR CASE MODULE | 1 | |
| 9C6015P01 | FIXTURE, SHIPPING - FAN STATOR CASE MODULE | 1 | |
| 9C6015P08 | FIXTURE, SHIPPING - FAN STATOR CASE MODULE | 1 | |
| 9C6015P09 | FIXTURE, SHIPPING - FAN STATOR CASE MODULE | 1 | |
| 9C6023 | FIXTURE - SHIPPING - FAN STATOR CASE MODULE (2 OVERHEAD HOISTS REQUIRED) | 1 | |
| 9C6030P01 | FIXTURE, SEPARATION - FAN CASE GE90-70/80/90 AND GE90-100 SERIES | 2 | |
| 9R7066 | (RT) FIXTURE, MACHINING- STG1 FAN CASE SHROUD | 1 | |
| 9R7066G02 | FIXTURE MACHINING-STAGE 1 FAN CASE SHROUD (GRIND TOOL) | 1 | |
| 9R7066G03 | FIXTURE MACHINING-STAGE 1 FAN CASE SHROUD (GRIND TOOL) | 1 | |
| 9R7066G04 | FIXTURE MACHINING-STAGE 1 FAN CASE SHROUD (GRIND TOOL) | 1 | |
| 9R7066G06 | FIXTURE MACHINING - STG1 FAN CASE SHEOUD | 1 | |
| A78024-1 | ALIGNMENT FIXTURE - INNER FAN DUCT WALL CF6-80A ENGINE | 1 | |
| B1618 | FAN LIFTING FIXTURE | 1 | |
| B78004 | RIGGING FIXTURE -0 SPRING BUMPER, FAN DUCT COWL | 1 | |
| B78004-1 | RIGGING FIXTURE - SPRING BUMPER, FAN DUCT COWL AND THRUST REVERSER | 3 | |
| D71TR000002G01 | FIXTURE - SEPARATION, GE90 FAN CASE | 1 | |
| FXT-11032 | FAN SUPPORT FIXTURE | 1 | |
| GS22331-1 | FAN END HOLDING FIXTURE | 2 | |
| J71034-1 | PROOF LOAD FIXTURE - HOLD OPEN EQUIPMENT, FAN COWL, TRENT 800 | 1 | |
| LTCT12986-01 | Fixture, Locking, N 1 System Fan Assembly | 1 | |
| LTCT13930-01 | Fixture Assembly, Fan Assembly Torquing | 1 | |
| LTCT13966-01 | Fixture, Fan Pushing | 1 | |
| LTCT7468-01 | Fixture Assembly, Fan Blade Indicator | 1 | |
| LW95887 | FAN DISK LIFT FIXTURE | 1 | |
| OWB9600010 | FIXTURE LIFT & ROTATE FWD FAN FRAME | 1 | |
| PWA 115244 | FAN FRONT BLADE LOCK FIXTURES | 2 | |
| PWA 28680 | FRONT FAN CASE DRILLING FIXTURE | 1 | |
| PWA 87055 | FIXTURE, SUPPORT - FAN BLADE REMOVAL | 5 | |
| PWA105742 | FIXTURE-SHIPPING,FAN CASE MODULE,SPLIT SHIP TRANSPORT | 1 | |
| PWA105767 | FIXTURE REMOVE - LPC FAN BLADE LOCK | 1 | |
| PWA111017 | FIXTURE, SUPPORT FAN SPINNER | 3 | |
| PWA111529 | FIXTURE, INSTALLATION - ENGINE ASSY, FAN | 5 | |
| PWA115244 | FAN FRONT BLADE LOCK FIXTURES | 2 | |
| PWA12632 | FIXTURE INSPECTION BLADE FAN ROTOR | 2 | |
| PWA211404 | LIFT FIXTURE FAN CASE | 2 | |
| PWA26133 | FIXTURE - FAN ROTOR CLAMPING_[PWA26133] | 1 | |
| PWA26676 | FIXTURE FAN BLADE | 1 | |
| PWA27531 | FIXTURE,SUPPORTING - FAN BLADE R/I_[PWA27531] | 1 | |
| PWA27533 | FIXTURE - LOADING FAN BLADE | 1 | |
| PWA29246 | FIXTURE-SUPPORT FAN BLADE REPLACEMENT | 1 | |
| PWA85035 | FIXTURE-SUPPORT FAN BLADE REPLACEMENT | 7 | |
| PWA85046 | FIXTURE ANGLE OF TURN LPC FAN HUB TO DRUM ROTOR TIEROD NUT | 1 | |
| PWA85047 | FIXTURE ANGLE OF TURN LPC FAN HUB TO DRUM ROTOR TIEROD NUT | 1 | |
| PWA85049 | FIXTURE ANGLE OF TURN LPC FAN HUB TO DRUM ROTOR TIEROD NUT | 1 | |
| PWA85053 | FIXTURE ANGLE OF TURN LPC FAN HUB TO DRUM ROTOR TIEROD NUT | 1 | |
| PWA87055 | FIXTURE, SUPPORT - FAN BLADE REMOVAL | 5 | |
| PWA87055-1 | FIXTURE, SUPPORT - FAN BLADE REMOVAL | 1 | |
| PWC43017 | LIFTING FIXTURE - FAN ASSEMBLY | 1 | |
| PWC48540 | DRILL FIXTURE, FAN CASE LINER INSERTS | 1 | |
| PWC60449 | LIFTING FIXTURE (FAN BALANCING ASSEMBLY) | 2 | |
| PWC86227 | FIXTURE IBR FAN INSTALL AND REMOVAL | 1 | |
| PWC86715 | FAN CASE ASSEMBLY FIXTURE | 1 | |
| RBH5610-705-40101 | INSPECTION FIXTURE FAN ASSEMBLY TRANS & COUPLING | 2 | |
| RSE7203 | HOIST FIXTURE; LOWER FAN COWL | 1 | |
| RSE7203 REV C | HOIST FIXTURE; LOWER FAN COWL | 1 | |
| 956A6065G01 | REMOVE FIXTURE,FAN DISK SPACER,SUPPORT E | 2 | |
| PWA29246 | FIXTURE - SUPPORT FAN BLADE REPLACEMENT | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
