| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 2225M27P02 | FAN BLADE | 1 | |
| 363-906-002-0 | FAN BLADE | 1 | |
| 364-906-002-0 | FAN BLADE | 1 | |
| 4036 | FAN BLADE | 7 | |
| 4114T15P02 | FAN BLADE | 1 | |
| 856A3684G01 | Fan Blade | 1 | |
| 9C6028 | FAN BLADE | 1 | |
| AGSE-C061 | FAN BLADE | 1 | |
| PWA 29247 | FAN BLADE | 1 | |
| PWC63206 | fan blade | 1 | |
| UT1930-1 | FAN BLADE | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) UT2000 | FAN BLADE TEST KIT (CALIBRATION) | 2 | |
| 07-010008 | QUOTE FOR UT FAN BLADE INSPECTION CABLE | 2 | |
| 1017815 | TAP TEST KIT - WIDE CHORD FAN BLADE INSPECTION | 1 | |
| 10C1108 | PULLER, SPACER - STG 1 FAN BLADE, MECHANICAL | 1 | |
| 10C1108G01 | CF34-10 FIXTURE PRELOAD SPACER STG 1 FAN BLADE 195 | 1 | |
| 10C1108G02 | PULLER-SPACER STAGE 1 FAN BLADE | 4 | |
| 10C1113 | FIXTURE REMOVE SPACERSTAGE 1 FAN BLADE HYDRAULIC | 1 | |
| 10C1113G01 | FAN BLADE REMOVAL TO | 2 | |
| 10C1263 | STAND, STORAGE - FAN BLADES | 1 | |
| 10C1263G01 | STAND, STORAGE - FAN BLADES | 1 | |
| 11C3323G01 | TOOL, REMOVAL - STAGE 1 FAN BLADE SPACER | 2 | |
| 11C3398G01 | Tool - Removal, Spacer Fan Blade, Slide Hammer | 4 | |
| 11C3403 | GAGE - TAPER-FAN BLADE/CASE | 1 | |
| 11C3403P02 | GAGE - TAPER-FAN BLADE/CASE | 1 | |
| 11C3403P03 | GAGE - TAPER-FAN BLADE/CASE | 1 | |
| 11C3403P04 | GAGE, TAPER - FAN BLADE/CASE | 1 | |
| 11C3403P05 | GAGE - TAPER-FAN BLADE/CASE | 1 | |
| 11C3403P06 | GAGE - TAPER-FAN BLADE/CASE | 1 | |
| 11C4296G01 | Gauge - Fan Blade/Case Gap (Capacitance Measurement) | 1 | |
| 11C4594G02 | FIXTURE, FAN BLADE TRANSPORTION CAROUSEL | 1 | |
| 11C4645 | FIXTURE, SPREAD FAN BLADE | 1 | |
| 11C4645G01 | Fixture - Fan Blade Spreader | 3 | |
| 11C4654G01 | FIXTURE-FAN BLADE SPREADER (SPL-12466) | 1 | |
| 18C1326 | FXTR, GUIDE - BOOSTER / FAN BLADE | 1 | |
| 1J12004 | MD90 FAN BLADE TOOLING | 1 | |
| 21C11423G01 | ASSEMBLY STAGE 1 FAN BLADES | 1 | |
| 21C8138G01 | FIXTURE STAGE 1 FAN BLADE | 1 | |
| 21C8983P01 | FAN AND COMPRESSOR BLADES MARKING | 1 | |
| 2C14225G01 | Fan Blade Insp. Blending | 1 | |
| 2C14630G02 | FIXTURE,PRELOAD-STAGE 1 FAN BLADE SPAC | 1 | |
| 2C14728G01 | Fan Blade Insp. Blending | 5 | |
| 2C14928G02 | SHROUD, BAL ‐FAN ROTOR WITHOUT STG 1 BLADES | 1 | |
| 2C14929G01 | DOLLY, INSTALLATION ‐ FAN ROTOR/BALANCE ARBOR WITHOUT STG 1 BLADES | 1 | |
| 2C15629 | INSPECTION FIXTURE, FAN BLADES STAGE 1 | 1 | |
| 2C18012 | FIXTURE, PRELOAD - SPACER, STAGE 1 FAN BLADE | 2 | |
| 2C18012602 | FAN BLADE REM TOOL | 1 | |
| 2C18012G01 | FAN BLADE RML/INST'L | 2 | |
| 2C18012G02 | FAN BLADE REM. TOOL | 6 | |
| 2C18012GO2 | FIXTURE, PRELOAD - SPACER, STAGE 1 FAN BLADE | 6 | |
| 2C5087P01 | PROTECTOR, FAN BLADE TIPS | 1 | |
| 2C5720G01 | FIXTURE - FAN BLADES | 1 | |
| 2C5721G01 | FIXTURE - FAN BLADES | 1 | |
| 2C6269 | FIXTURE INSTALL REMOVE-SPACER STAGE 1 FAN BLADE | 1 | |
| 2C6367 | GUIDE OF UNIQUE FAN BLADE INST. SPINNER | 2 | |
| 2C6367G01 | GUIDE OF UNIQUE FAN BLADE INST. SPINNER | 10 | |
| 2C6879 | TEMPLATE,LEADING EDGE-FAN BLADE STAGE 1 | 1 | |
| 2C6879P01 | Stg. 1 Fan Blade LE Template (80A3/80C2) | 4 | |
| 2C6894G04 | Fan Blade Spinner Removal Tool | 10 | |
| 2C6920P01 | FANBLADE TOOL | 5 | |
| 2C6933G01 | TEMPLATE, BLEND-FAN BLADE STG. 1 | 1 | |
| 2C6950 | SPACER ADJUSTABLE STABLE ONE FAN BLADE | 1 | |
| 2C7399 | FIXTURE, HOLDING - FAN BLADE STG. 1 | 1 | |
| 2C7399 REV C | FIXTURE, HOLDING - FAN BLADE STG. I | 1 | |
| 2C7546G11 | FIXTURE - FAN BLADE LEADING EDGE, 60 HZ | 1 | |
| 2C7546G12 | FIXTURE - FAN BLADE LEADING EDGE, 50 HZ | 1 | |
| 2C7734P01 | CONTOUR MASTER - STAGE ONE FAN ROTOR BLADE LEADING EDGE | 1 | |
| 2C8047 | INSTALLATION-STAG1 FAN BLADE RETAINER | 1 | |
| 2C8047G01 | FAN BLADE TOOL | 4 | |
| 2C8072 | FIXTURE, PRELOAD-SPACER STAGE 1 FAN BLADE 1 | 1 | |
| 2C8073 | FIXTURE,PRELOAD-SPACER STAGE 1 FAN BLADE | 2 | |
| 2C8073 REV G | FIXTURE, PRELOAD SPACER STG. I FAN BLADE | 1 | |
| 2C8073G01 | FAN BLADE REMOVAL TOOL & KIT | 2 | |
| 2C8073G01TK | FIXTURE, PRELAND-SPACER STG.1 FAN BLADE | 1 | |
| 2C8073G02 | FAN BLADE REMOVAL TOOL | 1 | |
| 2C8073G03 | FAN BLADE REMOVAL TOOL | 1 | |
| 2C8073G04 | TOOL INST FAN BLADE RET | 8 | |
| 2C8073G05 | FAN BLADE TOOL 80A & | 13 | |
| 2C81083 | PROGRAM - FAN BLADE PIN HOLE EVALUATION | 1 | |
| 2C81083P01 | Program Evaluation − Fan Blade Pin Hole | 1 | |
| 2C81083P06 | Program Evaluation − Fan Blade Pin Hole | 1 | |
| 2C81109 | FAN BLADE PIN PULLER | 1 | |
| 2C81109G01 | PULLER ASSY - PIN FAN BLADE | 3 | |
| 2C847 | TOOL INSTALATION-STAGE 1 FAN BLADE RETAIN | 1 | |
| 2C91069 | GAGE, FAN BLADE LEADING EDGE INSPECTION | 1 | |
| 2C91069G01 | GAUGE FAN BLADE LEADING EDGE | 1 | |
| 2C91249G01 | SCALE - FAN BLADES | 1 | |
| 2C91251P01 | RETAINER - FAN ROTOR BLADE | 1 | |
| 2R1120 | FIXTURE, DOVETAIL MACHIN. STAGE 1 ROTOR FAN BLADE | 1 | |
| 2RII20 | FIXTURE, DOVETAIL MACHIN. STAGE I ROTOR FAN BLADE | 1 | |
| 30R0204 | FAN BLADE MOMENT WEIGHT | 1 | |
| 337-000-114-0 | FAN BLADE ROTOR STG1 | 1 | |
| 337-177-001 | FAN BLADE PAIR SET ROTOR STG1 | 1 | |
| 338-002-114-0 | ENGINE FAN BLADE | 1 | |
| 340-001-038-0 | FAN BLADES | 1 | |
| 3782G01 | Wrench I/R Fan Blade Ring | 1 | |
| 4091AS0172-1 | FAN BLADE SPACER PULLER, T-HANDLE / MFC: 5C905 | 1 | |
| 5322121 | BLADE, FAN | 1 | |
| 537204511 | FAN BLADE REPAIR KIT | 1 | |
| 537220019 | STORAGE # CONTAINER FAN BLADE | 1 | |
| 537222030 | GAUGE-FAN BLADE REPAIR CF6-80 | 1 | |
| 5837022-11 | FAN BLADE RETAINER | 1 | |
| 5837097-1 | FAN BLADE INSTALLATION TOOL | 1 | |
| 5837203-23 | REMOVAL TOOL FAN BLADE RETAINER | 1 | |
| 6796950-7 | PULLER PLATEFORMS FAN BLADES | 1 | |
| 700043742 | V2500 FAN BLADE LUBE STENCIL | 1 | |
| 831016-1 | RETAINER, FAN BLADE | 1 | |
| 831017-1 | RETAINER, FAN BLADE | 1 | |
| 835-242-S5 | SOFTWARE SPREADSHEET FOR FINDING THE CORRECTED FAN BLADE TIP CLEARANCE MACHINING DEPTH OF CUT - OPTIONAL | 1 | |
| 846-501-900 | ADAPTER PULLER– FAN BLADES SHIM | 1 | |
| 856A1130G10 | FAN BLADE REMOVAL KIT CREATION | 25 | |
| 856A1832G01 | PULLER FAN BLADE SPACERS | 4 | |
| 856A2379G01 | STAGE 1 FAN BLADE SPACER REMOVAL TOOL | 5 | |
| 856A2405G01 | LEADING EDGE GAGE - FAN BLADE | 1 | |
| 856A2405G02 | Gauge, Leading Edge of Fan Blade | 1 | |
| 856A2413G01 | TEMPLATE - LEADING EDGE FAN BLADE | 2 | |
| 856A2427G01 | COUNTERWEIGHT FIXTURE - FAN BLADE | 1 | |
| 856A2510 | FAN BLADE STORAGE RACK | 1 | |
| 856A2630 | FIXT. CHECK FAN BLADE | 1 | |
| 856A2630G01 | FAN BLADE LE CHECKER | 1 | |
| 856A2631 | STAND,STORAGE-FAN BLADES | 2 | |
| 856A2631G01 | Stand, Storage - Fan Blades (storage stand) | 11 | |
| 856A2631 | STAND,STORAGE-FAN BLADES | 2 | |
| 856A2656 | FAN-BLADES PLOTTING MULTI CFM56 | 1 | |
| 856A2656G03 | Fan Blade Plotting | 2 | |
| 856A2656G04 | Fan Blade Plotting | 1 | |
| 856A2682G01 | ECI KIT - FAN BLADE | 2 | |
| 856A2682G02 | ECI KIT - FAN BLADE | 1 | |
| 856A2691G01 | 856A2691G01 - Fan Blade Spacer Pliers | 26 | |
| 856A2691G02 | FAN BLADE SPACER PLIERS | 2 | |
| 856A2694G01 | PULLER ADAPTER - FAN BLADE SPACERS | 4 | |
| 856A2700 | ADAPTER,PULLER-FAN BLADE SPACERS | 3 | |
| 856A2700 G01 | Puller Adapter - Fan Blade Spacers | 13 | |
| 856A2700G01 | PULLER FAN BLADE | 13 | |
| 856A2701G01 | PULLER ADAPTER - FAN BLADE SPACERS | 1 | |
| 856A2770G01 | ADAPTOR PULLER FAN BLADE | 1 | |
| 856A2791G01 | CFM56 FAN BLADE PULLER TOOL | 10 | |
| 856A2802 | TEMPLATE CHECKING FAN BLADE LEADING EDGE | 1 | |
| 856A2802G01 | TEMPLATE FAN CHECKING FAN BLADE LEADING EDGE | 1 | |
| 856A2802G02 | Template Fan Blade | 1 | |
| 856A2947G01 | Contour Template (Fan Blade) | 1 | |
| 856A2948 | PRESSURE TOOL,INFLATION FAN BLADES (220V/50HZ) | 1 | |
| 856A2949 | TEMPLATE, CHECKING - FAN BLADE LEADING EDGE | 1 | |
| 856A2949G01 | EXTRACTOR FAN BLADE LEADING EDGE | 1 | |
| 856A2949G02 | Template checking fan blade | 1 | |
| 856A2951G01 | COUNTERWEIGHT FIXTURE - FAN BLADE | 2 | |
| 856A2954 | PULLER FAN BLADES SPACERS | 1 | |
| 856A2954 G01 | Puller - Fan Blade Spacers | 16 | |
| 856A2954G | Puller-Spacers,Fan blade | 1 | |
| 856A2954G01 | PULLER-SPACERS,FAN BLADE | 16 | |
| 856A2954G02 | PULLER - FAN BLADE SPACERS | 3 | |
| 856A2956 | TOOL - ASSISTANCE, FAN BLADE, RETAINING RING | 2 | |
| 856A2956G01 | Tool - Assistance, Fan Blade, Retaining Ring | 16 | |
| 856A2956G01 FAS | CFM56 FAN BLADE RETAINING RING | 2 | |
| 856A2956P04 | BOLT PULLER – SPACERS FAN BLADE | 3 | |
| 856A2956P04 | BOLT (PULLER – SPACERS FAN BLADE) | 3 | |
| 856A3312G01 | Balancing Shaft - Bladed Fan Disc | 1 | |
| 856A33782G02 | WRENCH - FAN BLADE, RETAINER RING, REMOVAL | 1 | |
| 856A3492G07 | MAPPING SOFTWARE - FAN/BOOSTER/LPT BLADES | 1 | |
| 856A3500 | ADAPTER, PULLER-FAN BLADE SPACERS | 1 | |
| 856A3500 G01 | Adapter Puller ‐ Fan Blade Spacers | 17 | |
| 856A3500 REV A | ADAPTER, PULLER-FAN BLADE SPACERS | 1 | |
| 856A3500G01 | ADAPTER, PULLER FAN BLADE SPACER | 17 | |
| 856A3500P02 | ADAPT- FAN BLADE PULLER | 2 | |
| 856A3503G01 | FAN BLADES PLOTTING MULTI CFM56 | 3 | |
| 856A3518G01 | STORAGE STAND - FAN BLADES | 3 | |
| 856A3584G01 | CONTAINER, SHIPPING-38 FAN BLADES | 1 | |
| 856A3586G01 | CONTAINER SHIPPING FAN BLADES | 1 | |
| 856A3602G02 | Template, Fan Blade | 1 | |
| 856A3622 | TEMPLATE FAN BLADE LEADING | 1 | |
| 856A3622G01 | CHECK FAN BLADE LEADING EDGE | 1 | |
| 856A3622G02 | TEMPLATE FAN BLADE C | 1 | |
| 856A3622G03 | FANBLADE TEMPLATE | 7 | |
| 856A3629P02 | FANBLADE M/SPAN TIP GAUGE | 11 | |
| 856A3630 | PRESSURE TOOL INFLATABLE FAN BLADES INNER PATCH (220V) | 1 | |
| 856A3707 | PULLER FAN BLADE SPACERS. | 1 | |
| 856A3707G01 | Fan Blade Spacers | 3 | |
| 856A3707G02 | PULLER - SPACERS , FAN BLADE | 1 | |
| 856A3707G03 | PULLER - SPACERS , FAN BLADE | 1 | |
| 856A3707G04 | Puller, Fan Blades | 1 | |
| 856A3707G05 | Adaptor, Puller Fan Blade Spacer | 11 | |
| 856A3707G05 | PULLER - FAN BLADE SPACER | 11 | |
| 856A3707G05-BLOCK | BLOCK - CFM56-7 FAN BLADE SPACER PULLER | 1 | |
| 856A3707G05-KIT | PULLER - FAN BLADE SPACER - KIT | 1 | |
| 856A3707G05-PIN | PIN - CFM56-7 FAN BLADE SPACER PULLER | 1 | |
| 856A3707G06 | PULLER-FAN BLADE SPA | 9 | |
| 856A3707G06 | PULLER - FAN BLADE SPACER | 9 | |
| 856A3707G07 | PULLER - FAN BLADE SPACERS | 9 | |
| 856A3707G07 | PULLER - FAN BLADE SPACER | 9 | |
| 856A3707G08 | PULLER, FAN BLADE SPACER | 15 | |
| 856A3707P15 | FAN BLADE PULLER | 4 | |
| 856A3707P16 | Puller, Fan Blade Spacer | 6 | |
| 856A3707P17 | Puller, Fan Blade Spacer | 8 | |
| 856A3707P18 | Puller, Fan Blade Spacer | 4 | |
| 856A3707P22 | PULLER FAN BLADE SPACER | 2 | |
| 856A3707P23 | PIN, FAN BLADE SPACER | 1 | |
| 856A3707P23 | PIN, FAN BLADE SPACER | 1 | |
| 856A3707P24 | PIN, FAN BLADE SPACER | 1 | |
| 856A3707P24 | PIN, FAN BLADE SPACER | 1 | |
| 856A3707P25 | PIN, FAN BLADE SPACER | 1 | |
| 856A3707P27 | PIN-FAN BLADE SPACER PULLER | 3 | |
| 856A3707P28 | PIN-FAN BLADE SPACER PULLER | 4 | |
| 856A3707P28 | PIN-FAN BLADE SPACER PULLER | 4 | |
| 856A3707P29 | PIN-FAN BLADE SPACER PULLER | 3 | |
| 856A3707P29 | PIN-FAN BLADE SPACER PULLER | 3 | |
| 856A3719 | STAND - STORE - FAN BLADES | 1 | |
| 856A3719G01 | Stand Store Fan Blades | 1 | |
| 856A3719G02 | STORAGE STAND - FAN BLADES | 4 | |
| 856A3719G03 | STORAGE STAND - FAN BLADES | 2 | |
| 856A3770G01 | Fan & Booster Blades Plotting Program | 1 | |
| 856A3770P02 | FAN BLADE MAPPING TO | 1 | |
| 856A3770P03 | MAPPING SOFWARE FAN/BOOSTER/LPT/BLADES | 2 | |
| 856A3770P05 | MAPPING SOFTWARE - FAN/BOOSTER/LPT BLADES | 1 | |
| 856A3771 | FAN BLADE TEMPLATE | 1 | |
| 856A3771G01 | Template Fan Blade Leading Edge | 4 | |
| 856A3778P03 | FAN BLADE REMOVAL KIT CREATION | 1 | |
| 856A3778P04 | FAN BLADE REMOVAL KIT CREATION | 1 | |
| 856A3779 | PULLER PLATFORMS, FAN BLADE | 1 | |
| 856A3779 G02 | FAN BLADES PLATFORMS PULLER | 25 | |
| 856A3779G01 | FAN BLADE PLATFORM PULLER - CFM56-7 | 11 | |
| 856A3779G01 FAS | CFM56 FAN BLADE SPACER PULLER | 1 | |
| 856A3779G01L0C | PULLER PLATFORM - FAN BLADE | 1 | |
| 856A3779G02 | Puller Platform Fan Blade | 25 | |
| 856A3779GO2 | FAN BLADE PLATFORM PULLER | 25 | |
| 856A3779P03 | PULLER PLATFORM FANBLADES | 1 | |
| 856A3782 | WRENCH, REMOVE FAN BLADE RETAINER RING | 1 | |
| 856A3782G01 | Wrench, I/R Fan Blade Retainer Ring | 6 | |
| 856A3782G02 | Wrench-FanBlade,RetainerRing,Removal | 26 | |
| 856A3782G02 | WRENCH - REMOVAL FAN BLADE, RETAIRNER RING | 26 | |
| 856A3782G02 FAS | CFM56 FAN BLADE RET. RING WRENCH | 1 | |
| 856A3782G02 FAS | CFM56 FAN BLADE RET. RING WRENCH | 1 | |
| 856A3782G08 | PULLER - FAN BLADE SPACERS | 1 | |
| 856A3905 | PULLER - FAN BLADE SPACER | 1 | |
| 856A3905G01 | PULLER SPACERS FAN BLADE | 4 | |
| 856A3905G02 | PULLER FAN BLADE | 7 | |
| 856A3905G02 | PULLER SPACERS FAN BLADE | 7 | |
| 856A3905G03 | PULLER - FAN BLADE SPACER | 6 | |
| 856A3905G03 | PULLER SPACERS FAN BLADE | 6 | |
| 856A3923 | PULLER FAN BLADE SPACER LINE | 1 | |
| 856A3923G01 | PULLER FAN BLADE SPACER LINE | 4 | |
| 856A3923G02 | PULLER FAN BLADE SPACER LINE | 2 | |
| 856A3923G03 | PULLER-FAN BLADE SPACER LINE | 2 | |
| 856A3927G02 | FAN BLADE REMOVAL KIT CREATION | 1 | |
| 856A3947 | PULLER FAN BLADE SPACERS | 1 | |
| 856A3947G01 | PULLER FAN BLADE SPACERS | 9 | |
| 856A3947G01 | FAN BLADE SPACERS PULLER | 9 | |
| 856A3947G02 | PULLER FAN BLADE SPACERS | 11 | |
| 856A3947G02 | FAN BLADE SPACERS PULLER | 11 | |
| 856A3947P11 | FAN BLADE REMOVAL KIT CREATION | 2 | |
| 856A3948 | PULLER FAN BLADE SPACERS | 1 | |
| 856A3948G01 | Puller – Fan Blade Spacers | 2 | |
| 856A3948G02 | CLAMP - FAN BLADE SPACERS | 5 | |
| 856A3958G01 | ZONING TOOL, ROOT RADIUS - FAN BLADE | 2 | |
| 856A3958G02 | ZONING TOOL, ROOT RADIUS - FAN BLADE | 1 | |
| 856A3974G02 | FAN BLADE SPACERS PULLER | 1 | |
| 856A4610 | DIM INSP MASTER - FAN BLADE | 1 | |
| 856A4610G01 | DIM INSP MASTER - FAN BLADE | 1 | |
| 856A4611 | FIXTURE CHECKING FAN BLADE | 1 | |
| 856A4611G01 | DIM INSP FIXTURE - FAN BLADE | 1 | |
| 856A4611G02 | DIM INSP FIXTURE - FAN BLADE | 1 | |
| 856A4612 | DIM INSP PROGRAM DATA DISK - FAN BLADE | 1 | |
| 856A4612G03 | DIM INSP PROGRAM DATA DISK - FAN BLADE | 1 | |
| 856A4617 | (RT) TEMP. FAN BLADE LDG EDGE | 1 | |
| 856A4617G01 | Template - Fan Blade Leading Edge and Trailing Edge | 1 | |
| 856A4617G02 | L/T EDGE CHECKING TEMPLATE - FAN BLADE | 1 | |
| 856A4625G01 | LEADING EDGE CONTOUR FAN BLADE | 1 | |
| 856A4625G02 | LEADING EDGE CONTOUR FAN BLADE | 1 | |
| 856A4628 | VISUAL INSPECTION KIT - FAN BLADE ROOT | 1 | |
| 856A4628G01 | Tool-Inspection,pressure faces,dovtail,Fan blade,missing coating, inch units only | 9 | |
| 856A4628G02 | TEMPLATE-FAN BLADE | 8 | |
| 856A4628G02 | TOOL CHECK COATING FAN BLADE ROOT | 8 | |
| 856A4633G02 | FAN BLADE REMOVAL KIT CREATION | 13 | |
| 856A4637G01 | GAUGE - FAN BLADE REAR SHANK | 9 | |
| 856A4639 | TOOL, MEASUREMENT - FAN BLADE TIP CLEARANCE | 1 | |
| 856A4639G02 | TOOL MEASUREMENT FAN BLADE TIP CLEARANCE | 1 | |
| 856A4639G06 | TIP CLEARANCE METER - FAN FRAME/FAN BLADE | 2 | |
| 856A4639G07 | TOOL, MEASUREMENT - FAN BLADE TIP CLEARANCE (CHECKING TOOL) | 1 | |
| 856A4639G08 | TIP CLEARANCE METER - FAN FRAME/FAN BLADE | 2 | |
| 856A4639G09 | TOOL, MEASUREMENT - FAN BLADE TIP CLEARANCE (CHECKING TOOL) | 1 | |
| 856A4639G10 | TOOL, MEASUREMENT - FAN BLADE TIP CLEARANCE (CHECKING TOOL) | 2 | |
| 856A4640G01 | FAN BLADE REMOVAL KIT CREATION | 7 | |
| 856A4640G02 | LEVER ARM-FAN BLADE SPACERS | 1 | |
| 856A4646 | FAN BLADE REAR SHANK WEAR INSPECTION TOOL | 1 | |
| 856A4646G0 | FAN BLADE REAR SHANK WEAR INSPECTION TOOL | 1 | |
| 856A4646G01 | GAUGE - FAN BLADE REAR SHANK | 8 | |
| 856A4646G01 | FAN BLADE REAR SHANK WEAR INSPECTION TOOL | 8 | |
| 856A4646G02 | FAN BLADE REAR SHANK WEAR INSPECTION TOOL | 1 | |
| 856A4705G01 | KIT,ULTRASONIC INSPECTION Â ROOT FAN BLADE | 1 | |
| 856A4705G02 | KIT,ULTRASONIC INSPECTION - ROOT FAN BLADE | 1 | |
| 856A4706G01 | FIXTURE, HOLDING -FAN BLADE | 1 | |
| 856A4706G02 | FIXTURE, HOLDING -FAN BLADE | 1 | |
| 856A5500 | MASTER FAN BLADE | 1 | |
| 856A5500G03 | MASTER - FAN BLADE | 1 | |
| 856A5569G01 | TIP NOTCH GRINDING FIXTURE - FAN BLADE | 1 | |
| 856A5571G02 | TIP NOTCH CHECK TOOL SET - FAN BLADE | 1 | |
| 856A5574G01 | CHECKING FIXTURE - FAN BLADE | 1 | |
| 856A5621G01 | CHECKING FIXTURE - FAN BLADE | 1 | |
| 856A5631G01 | STORAGE STANDS FOR FAN BLADES | 1 | |
| 856A5654G03 | MEASUREMENT COMPUTER FAN BLADE, S-1 LPT BLADE | 1 | |
| 856A5782G02 | WRENCH-FAN BLADE,RETAINING RING | 1 | |
| 856A5787G03 | LEADING EDGE TEMPLATE - FAN BLADE | 1 | |
| 856A5810G01 | MASTER - FAN BLADE | 1 | |
| 856A5811G01 | MID SPAN RADIUS EMPLATE - FAN BLADE | 1 | |
| 856A5816G01 | TIP CLEARANCE METER - FAN FRAME/FAN BLADE | 1 | |
| 856A5817 | TOOL,CHECK-FAN BLADE SHANK | 1 | |
| 856A5817G01 | FAN BLADE SHANK CHECK TOOL | 12 | |
| 856A5817G01 | CHECK FANBLADE SHANK MEASURE | 12 | |
| 856A5817G02 | SHANK CHECKING GAGE - FAN BLADE | 1 | |
| 856A5910G01 | MASTER - FAN BLADE | 1 | |
| 856A5911G01 | CHECKING FIXTURE - FAN BLADE | 1 | |
| 856A5912G01 | DIM INSP PROGRAM DATA DISK - FAN BLADE | 1 | |
| 856A5912G02 | DIM INSP PROGRAM DATA DISK - FAN BLADE | 1 | |
| 856A5916G01 | LEADING EDGE CONTOUR - FAN BLADE | 1 | |
| 856A5916G02 | LEADING EDGE CONTOUR - FAN BLADE | 1 | |
| 856A5919G01 | MATING FACES MILLING FIXTURE - FAN BLADES MID SPAN SHROUD | 1 | |
| 856A5928G01 | WAVINES BLENDING LEADING EDGE TEMPLATE - FAN BLADE | 1 | |
| 856A5928G02 | WAVINES BLENDING LEADING EDGE TEMPLATE - FAN BLADE | 1 | |
| 856A5939G01 | Fan Blade Tip Clearance Tool (fan blade tip clearance tool) | 1 | |
| 856A5939G02 | MEASUREMENT FAN BLADE TIP CLEARANCE | 2 | |
| 856A5946G01 | KIT,ULTRASONIC INSPECTION – ROOT FAN BLADE | 1 | |
| 856A5946G02 | KIT,ULTRASONIC INSPECTION - ROOT FAN BLADE | 1 | |
| 856A5947G01 | FIXTURE, HOLDING –FAN BLADE | 1 | |
| 856A5947G02 | FIXTURE, HOLDING -FAN BLADE | 1 | |
| 856A6603 G01 | Master - Fan Blade | 1 | |
| 856A6603G01 | MASTER-FAN BLADE | 1 | |
| 856A6608G02 | LEAD EDGE CONTOUR OF FAN BLADE | 1 | |
| 856A6609G01 | TEMPLATE - FAN BLADE LEADING EDGE | 2 | |
| 856A6615 | FIXTURE, INSP.-FAN BLADE ROOT DOVETAIL | 1 | |
| 856A6615 REV A | FIXTURE, INSP.-FAN BLADE ROOT DOVETAIL | 1 | |
| 856A6615G01 | FIXTURE-FAN BLADE ROOT DOVETAIL | 4 | |
| 856A6616 | MASTER FAN BLADE 25 DEGREES 7 37 DEGREE ANGLED MIDSPAN | 1 | |
| 856A6616 G04 | Master – Fan Blade 25 & 37 Angled Mid Span Shrouds | 2 | |
| 856A6616 REV B | MASTER FAN BLADE 25 DEGREES 7 37 DEGREE ANGLED MIDSPAN | 1 | |
| 856A6616G01 | MASTER FAN BLADE | 1 | |
| 856A6616G02 | MASTER FAN BLADE | 1 | |
| 856A6616G03 | MASTER FAN BLADE | 1 | |
| 856A6616G04 | MASTER FAN BLADE | 2 | |
| 856A6617G01 | FIXTURE, FAN BLADE | 1 | |
| 856A6617G02 | FIXTURE, FAN BLADE | 1 | |
| 856A6617G04 | FIXTURE, FAN BLADE | 1 | |
| 856A6617G05 | FIXTURE, FAN BLADE | 1 | |
| 856A6617G06 | FIXTURE, FAN BLADE | 2 | |
| 856A6627G04 | DIM INSP PROGRAM DATA DISK - FAN BLADES | 1 | |
| 856A6629-G02 | FAN BLADE WEAR TOOL | 3 | |
| 856A6632G01 | CONTOUR - TRAILING EDGE FAN BLADE | 1 | |
| 856A6634 | DOLLY, STORAGE - FAN BLADES | 1 | |
| 856A6638G01 | ROOT ECI KIT - FAN BLADE | 2 | |
| 856A6641G03 | ROOT ECI KIT - FAN BLADE | 1 | |
| 856A6641G04 | ROOT ECI KIT - FAN BLADE | 1 | |
| 856A6643 | ROOT ECI KIT - FAN BLADE | 1 | |
| 856A6643G01 | ROOT ECI KIT - FAN BLADE | 1 | |
| 856A6644 | ROOT ECI KIT - FAN BLADE | 1 | |
| 856A6644G01 | ROOT ECI KIT - FAN BLADE | 1 | |
| 856A6644G03 | ROOT ECI KIT - FAN BLADE | 1 | |
| 856A6645G01 | ROOT ECI KIT - FAN BLADE | 1 | |
| 856A6645G03 | ROOT ECI KIT - FAN BLADE | 1 | |
| 856A6707G08 | PULLER-FAN BLADE SPACER | 1 | |
| 856A6711 G01 | Master – Fan Blade | 1 | |
| 856A6711G01 | MASTER FAN BLADE | 1 | |
| 856A6712G02 | MASTER FAN BLADE | 1 | |
| 856A6747G01 | FIXURE MILL FAN BLADE | 1 | |
| 856A6761 | FIXTURE INSP.-FAN BLADE ROOT DOVETAIL | 2 | |
| 856A6761 REV A | FIXTURE INSP.-FAN BLADE ROOT DOVETAIL | 1 | |
| 856A6761G01 | FIXTURE-FAN BLADE ROOT DOVETAIL | 1 | |
| 856A6762 | PRESSURE TOOL INFLATABLE - FAN BLADES ADRADABLE LINER | 1 | |
| 856A6762G01 | PRESSURE TOOL INFLATABLE - FAN BLADES ABRADABLE LINER | 1 | |
| 856A6762G02 | PRESSURE TOOL INFLATABLE - FAN BLADES ABRADABLE LINER | 1 | |
| 856A6762G03 | PRESSURE TOOL INFLATABLE - FAN BLADES ABRADABLE LINER | 1 | |
| 856A6798G02 | MASTER - FAN BLADE | 1 | |
| 856A6806G01 | TIP CLEARANCE METER - FAN FRAME/FAN BLADE | 1 | |
| 856A6807G02 | KIT,ULTRASONIC INSPECTION - ROOT FAN BLADE | 1 | |
| 856S2700 | ADAPTER PULLER FAN BLADE SPACERS | 1 | |
| 856S2700 REV B | ADAPTER PULLER FAN BLADE SPACERS | 1 | |
| 865A2631G01 | STAND, STORAGE, FAN BLADES | 1 | |
| 8C2313 | TOOL, INSTALL/REMOVE – STG 1 FAN BLADE SPACER | 1 | |
| 8C2349 | TOOL, REMOVAL-STG 1 FAN BLADE SPACER | 1 | |
| 8C2615 | FIXTURE, INSTALL/REMOVE-FAN BLADE | 1 | |
| 8C2616 | STAND, FAN BLADE CAROUSEL | 1 | |
| 8C2656 | CONTAINER,SHIP-FAN BLADES | 1 | |
| 9111M35PO(X) | KIT, FAN BLADE BALANCING | 1 | |
| 9446M56 | PROGRAM, FAN BLADE REPLACEMENT | 1 | |
| 9446M56G03 | PROGRAM FAN BLADE REPLACEMENT | 1 | |
| 9446M56G04 | PROGRAM, FAN BLADE BALANCE | 1 | |
| 9446M61G01 | PROGRAM, BALANCE - BLADE INSTALLATION/REPLACEMENT (GE BLADEPLOT FAN BLADE MAPPING SOFTWARE) | 1 | |
| 9446M61G05 | Programe,Fan Blade Replacement | 2 | |
| 9446M61G11 | PROGRAM, FAN BLADE REPLACEMENT | 1 | |
| 956A5939G01 | FAN BLADE TIP CLEARANCE TOOL (FAN BLADE TIP CIEARANCE TOOL) | 1 | |
| 956A6061 | FIXTURE - ROTATION LOCK & DRIVE - FAN BLADE DISK | 1 | |
| 956A6063 | PULLER - FAN BLADE SPACER | 1 | |
| 956A6063G01 | FAN BLADE SPACERS PULLER | 1 | |
| 956A6063G02 | FIXTURE REMOVE SPACER FAN BLADE | 3 | |
| 956A6063G03 | DOLLY, STORAGE - FAN BLADES | 2 | |
| 956A6063G04 | FIXTURE REMOVE-SPACER,FAN BLADE | 4 | |
| 956A6065G01 | PULLER - FAN BLADE SPACER | 2 | |
| 956A6092 | RACK- FAN BLADE STORAGE | 1 | |
| 956A6092G01 | FAN BLADESR/I TOOLS | 1 | |
| 956A6092G01 | DOLLY, STORAGE - FAN BLADES | 1 | |
| 956A6093 | TOOL - REMOVAL, FAN BLADE PLATFORM | 1 | |
| 956A6629P07 | LEADING EDGE TEMPLATE - FAN BLADE | 1 | |
| 956A6634 | DOLLY, STORAGE - FAN BLADES | 1 | |
| 956A6634G01 | DOLLY, STORAGE - FAN BLADES 1 | 1 | |
| 956A6634G02 | RACK- FAN BLADE STORAGE | 1 | |
| 956A7651G0 | TOOL - REMOVAL, SPACER FAN BLADE, SLIDE HAMMER | 1 | |
| 956A7651G02 | TOOL - REMOVAL, SPACER FAN BLADE, SLIDE HAMMER | 4 | |
| 956A7671 | SOFTWARE, MAPPING - FAN BLADES | 1 | |
| 956A7671G01 | SOFTWARE, MAPPING - FAN BLADE | 1 | |
| 956A7671G02 | SOFTWARE, MAPPING- FAN BLADE | 1 | |
| 956A8051 | FIXTURE - REMOVE - SPACER - FAN BLADE | 1 | |
| 956A8051G02 | PULLER - FAN BLADE SPACER | 6 | |
| 956A8052 | FIXTURE - RESTRAIN - PLATFORM - FAN BLADE | 1 | |
| 956A8062G02 | Puller - Fan Blade Spacer | 5 | |
| 956A8089P06 | FAN BLADE R/I | 1 | |
| 956A8675G01 | FAN BLADE PLATFORMS R/I TOOL | 2 | |
| 9946M61G06 | PROGRAM FAN BLADE R/I | 1 | |
| 9C1202 | TOOL - SLIDE HAMMER FOR STAGE 1 FAN BLADE SPACER REMOVAL, GE90-70/80/90 AND -100 SERIES ENGINES | 1 | |
| 9C1202G02 | FAN BLADES SPACER TO | 5 | |
| 9C1278P02 | TOOL - REMOVAL, SPACER FAN BLADE | 1 | |
| 9C1322G02 | FAN BLADE RUNOUT CHECKING TOOL GE90 | 1 | |
| 9C1341 | GAGE, FAN BLADE/CASE TAPER | 1 | |
| 9C1341P01 | GAUGE -TAPER FAN BLADES/CASE | 2 | |
| 9C1361 | FIXTURE - FAN BLADE SPINNER R/I | 1 | |
| 9C3001 | TOOL, REMOVAL-STG 1 FAN BLADE | 1 | |
| 9C3001G01 | SLIDE HAMMER-FAN BLADE | 1 | |
| 9C3036G01 | TOOL - REMOVAL,SPINNER FAN BLADE | 2 | |
| 9C3129 | FIXTURE - SPREAD-FAN BLADE | 1 | |
| 9C3129G01 | FIXTURE SPREAD FAN BLADE | 1 | |
| 9C3129G01 | FIXTURE, SPREAD-FAN BLADE | 1 | |
| 9C3146 | PROGRAM, CALCULATION - FAN BLADE INTERLOCK/ WEAR | 1 | |
| 9C6028 | FAN BLADE CONTAINER | 1 | |
| 9C6028G01 | FAN BLADE CAROUSEL | 1 | |
| 9C6028P01 | CONTAINER-FAN BLADES GE90 | 1 | |
| 9C6029P01 | CONTAINER, SHIPPING - SINGLE FAN BLADE | 1 | |
| AB72001-SK7 | PULLER/PUSHER, FAN BLADE ROTOR INST/REM. | 1 | |
| AF-8000 | PROBE-EDDY CURRENT 1ST STAGE FAN BLADE LEAD.TRAIEDGE | 1 | |
| AF-8001 | PROBE - EDDY CURRENT, FIRST STAGE FAN BLADE (SPL-2183) | 1 | |
| AF-8001A | PROBE - EDDY CURRENT, FIRST STAGE FAN BLADE (SPL-2183) | 1 | |
| AS-047 | FAN BLADE REMOVAL TOOL | 1 | |
| AT956414 | FAN BLADE TIP PROTECTORS | 1 | |
| B717-100-01 | FAN BLADE BOLT TEMPLATE | 1 | |
| BALANCE-WEIGHTS | VARIOUS BAL. WEIGHTS FOR FAN BLADES | 1 | |
| C21003-80 | PULLER-SPACERS, FAN BLADE | 6 | |
| C32034-343 | TOOL - ASSISTANCE, FAN BLADE, RETAINING RING | 7 | |
| C7304 | PROBE: TWIN BNC V2500 FAN BLADE L/E KIT | 1 | |
| CFMCP5061 | TEMPORARY MARKER , FAN BLADE | 1 | |
| CG240-9 | ENGINE CFM56 FAN BLADE REMOV. TOOL | 4 | |
| CJ125-6 | ENGINE CFM56 FAN BLADE REMOV. TOOL | 3 | |
| CMP-V2500 | FAN BLADE CLAMP SET | 1 | |
| COUNTER | FAN BLADE COUNTER TOOL | 1 | |
| CTFAN9050-4 | REPLACEMENT FAN BLADE | 1 | |
| DF030-7 | FAN BLADE ASSEMBLY | 1 | |
| DQ50 | BALANCER-JT9D FAN BLADE_[DQ-50] | 1 | |
| E-33324-1 | FAN BLADE TOOLING | 1 | |
| EP0CHXT | INSTRUMENT - ULTRAS0NIC INSPECTI0N, FAN BLADES | 1 | |
| FAN56-3 | Fan Blade Trolley CFM 56-3 | 1 | |
| FAN56-5 | Fan Blade Trolley CFM 56-5 | 1 | |
| FAN56-7/V2500 | Fan Blade Trolley CFM 56-7 & V2500 | 1 | |
| FANBLADESANDINGKIT | FAN BLADE SANDING KIT (EMB) | 1 | |
| FANBLADETRANSB0X | FAN BLADE TRANSIT BOX ( TRENT ) | 1 | |
| FANBLADEWAGEN | FAN BLADE TROLLEY A319 | 1 | |
| FANLUBEFULLKIT | FAN BLADE REMOVAL TOOL KIT | 1 | |
| GE-CFMI-723 | CFM56-7 Fan blade us inspection kit | 2 | |
| GE-FQAP-446 | FAN BLADE PIN HOLE INSPECTION KIT | 1 | |
| GE-FQAP-446A | FAN BLADE PIN HOLE INSPECTION KIT | 1 | |
| GE-FQAP-544 | FAN BLADE ULTRASONIC INSPECTION (GE90-115B) | 1 | |
| GE-FQAP-544A | KIT - ULTRASONIC INSPECTION, FAN BLADES | 1 | |
| GE-FQAP-638 | FAN BLADE INSPECTION KIT GE AVIATION | 1 | |
| GE-FQAP-749 | KIT - FAN BLADE INSPECTION, GE ENGINES GE9X | 1 | |
| GU28767 | TOOL- RETENTION, LP FAN BLADE | 1 | |
| HU21567 | RING-FAN BLADE RETAINER | 1 | |
| HU27493 | B757 FAN BLADE REMOVAL TOOL | 3 | |
| HU29255 | EXTRACTOR - IMPACT, FAN BLADE COMPONENTS | 14 | |
| HU29255-D | Extractor - Impact, Fan Blade Comp, B787 | 1 | |
| HU30334 | LP FAN BLADE RETENTION | 2 | |
| HU33428-1 | EXTRACTOR FAN BLADE | 3 | |
| HU37438 | PLATFORM ACCESS - FAN DISK AND BLADES ASSY | 1 | |
| HU37594 | FAN BLADE CHOCK PAD REMOVER TOOL | 14 | |
| HU37701 | COVER - FAN DISK AND BLADE ASSY | 2 | |
| HU37782 | PILOT-GUIDE R I FAN DISK AND BLADES | 4 | |
| HU39483 | TOOL-FITTING FAN BLADE ASSY | 8 | |
| HU40308 | IMMOBILISER FAN BLADES WHILST TURNING IP SYSTEM | 4 | |
| HU41100 | ADAPTER-PILOT GUIDE R I FAN DISK AND BLADES | 1 | |
| HU41384 | ADAPTER-PILOT GUIDE R I FAN DISK AND BLADES | 1 | |
| HU42018-1 | GAUGE, TAPER - CHECK FANBLADE TIP | 1 | |
| HU42018-2 | GAUGE - TAPER CHECK GAP BETWEEN FAN BLADE TIP & OUTER FAN TRACK | 5 | |
| HU44525 | IMMOBILISER - LP FANBLADES | 1 | |
| HU44525-1 | 787 IMMOBILISER LP FANBLADES TOOL | 10 | |
| HU44525-2 | IMMOBILIZER - LP FANBLADES | 3 | |
| HU505091-1 | STAND - TRANSIT, FAN DISC AND BLADE ASSEMBLY | 1 | |
| HU55091-3 | STAND - FAN DISK AND BLADE ASSY | 1 | |
| HU55091-4 | STAND - TRANSIT, FAN DISC AND BLADE ASSY | 1 | |
| HU55091-5 | STAND - FAN DISK AND BLADE ASSY | 2 | |
| HU55143-6 | TIP CLEARANCE METER - FAN FRAME/FANBLADE | 1 | |
| HU80955 | FAN BLADE IMMOBILSER TOOL | 8 | |
| HU81332 | EXTRACTOR FAN BLADE | 2 | |
| HU81332-1 | EXTRACTOR - FAN BLADE FROM | 2 | |
| HU81570 | TAY FAN BLADE ROOT. ULTRA | 1 | |
| HU81850 | RB211 FAN BLADE INSPECTION KIT TOOL | 1 | |
| HU81925 | FAN BLADE ROOT CRACK ULTRASONIC KIT | 2 | |
| HXC-17142 | Genx-2B engine fan blade storage rack | 1 | |
| IAE1J12004 | Puller - Fan Blade Rotor | 13 | |
| IAE1J12092 | Removal of Fan BladesLHT Dwg No.(537220249) | 1 | |
| IAE1J12141 | BOLT- PUSHER FAN BLADE RETAINING RING | 16 | |
| IAE1J12188 | BOLT- PULLER FAN BLADE RETAINING RING | 24 | |
| IAE1J12312 | PROGRAM, DISTRIBUTION - FAN BLADE | 2 | |
| IAE1J2004 | EQUIPMENT - FAN BLADE PUSH/PULL | 1 | |
| IAE2R18901 | TEST SET, FOR V2500 FAN BLADES | 7 | |
| IAE2R19316 | ULTRASONIC PROBE TO INSPECT THE ROOTS OF V2500 FAN BLADES | 3 | |
| IAE2R19427 | FAN BLADE LEADING EDGE INSP KIT | 5 | |
| IAE2R19429 | FAN BLADE ROOT NDT KIT TOOL | 6 | |
| IAE2R19921 | TEST SET KIT, T.A.P. - LP FAN BLADE, INSPECTION. | 3 | |
| IAE3R19320 | TEMPLATE, FAN BLADE | 2 | |
| IAW1J12004 | FAN BLADE PULLER | 1 | |
| JMP/BMW/A/4968 | 60" Fan Blade Wash Lance | 1 | |
| KITV2500-00003 | KIT - FAN BLADE MAINTENANCE | 1 | |
| L-37799 | CUTTER FAN BLADE LEADING EDGE | 1 | |
| L-37810 | CUTTER FAN BLADE LEADING EDGE | 1 | |
| L-37815 | CUTTER FAN BLADE LEADING EDGE | 1 | |
| L-37822 | CUTTER FAN BLADE LEADING EDGE | 1 | |
| L-37823 | CUTTER FAN BLADE LEADING EDGE | 1 | |
| L-37840 | CUTTER FAN BLADE LEADING EDGE | 1 | |
| L-37845 | CUTTER FAN BLADE LEADING EDGE | 1 | |
| L-37855 | CUTTER FAN BLADE LEADING EDGE | 1 | |
| L-37920 | CUTTER FAN BLADE LEADING EDGE | 1 | |
| L-534718 | CUTTER FAN BLADE LEADING EDGE | 1 | |
| L-534862 | CUTTER FAN BLADE LEADING EDGE | 1 | |
| L-534866 | CUTTER FAN BLADE LEADING EDGE | 1 | |
| L-534884 | CUTTER FAN BLADE LEADING EDGE | 1 | |
| L-543814 | CUTTER FAN BLADE LEADING EDGE | 1 | |
| L-544317 | CUTTER FAN BLADE LEADING EDGE | 1 | |
| L-544394 | CUTTER FAN BLADE LEADING EDGE | 1 | |
| L-544415 | CUTTER FAN BLADE LEADING EDGE | 1 | |
| L-544638 | CUTTER FAN BLADE LEADING EDGE | 1 | |
| LTCT7468-01 | Fixture Assembly, Fan Blade Indicator | 1 | |
| LTCT7494-01 | ENGINE FAN BLADE LOCKING TOOL | 5 | |
| MPN0411 | Fan blade storage, V2500,CFM56-7 | 1 | |
| MSE-54 | EXTRACTOR, FAN BLADE | 8 | |
| MSE54 | FAN BLADE EXTRACTION TOOL 767 CF6 | 8 | |
| MSE‐54 | EXTRACTOR, STG 1 FAN BLADES | 8 | |
| NB40FRB | FAN BLADE RACK | 1 | |
| NP856A3518 | FAN BLADE STAND | 1 | |
| PF71-013-1 | FAN BLADE LOCK STRAPS | 1 | |
| PF71-014 | FAN BLADE LOCK STRAPS | 1 | |
| PWA 101042A | PROBE: 767 LP 1.6 COMPLETE FAN BLADE KIT | 1 | |
| PWA 102828 | MECHANICAL COMPRESSOR (FAN BLADE LOCK) | 5 | |
| PWA 110921 | SOFTWARE, DISTRIBUTION ASSEMBLY - FAN BLADE | 1 | |
| PWA 111016 | FAN BLADE SPACER PULLER | 4 | |
| PWA 115061 | FAN BLADE FAIRING PIN PULLER | 2 | |
| PWA 115221 | FAN BLADE SHIPPING SET | 1 | |
| PWA 115244 | FAN FRONT BLADE LOCK FIXTURES | 2 | |
| PWA 16606 | MOMENT WEIGHT SCALE COMPRESSOR FAN BLADE | 1 | |
| PWA 75909 | PROBE-1ST STAGE FAN BLADE | 3 | |
| PWA 87055 | FIXTURE, SUPPORT - FAN BLADE REMOVAL | 5 | |
| PWA 88617 | COMPRESSOR-FAN BLADE LOCK | 5 | |
| PWA-28393 | RETAINER-FAN ROTOR BLADES | 5 | |
| PWA10044 | ENG FAN BLADE CHG CONNECTOR | 3 | |
| PWA101032 | SOFTWARE, DISTRIBUTION - LPC, FAN BLADE (PWBAL) | 1 | |
| PWA101042A | 767 LP 1.6 COMP FAN BLADE KIT | 1 | |
| PWA101211 | GAGE, CROSS SHROUD - FAN BLADE | 1 | |
| PWA101211 REV NC | GAGE, CROSS SHROUD - FAN BLADE | 1 | |
| PWA101212 | MASTER, CROSS SHROUD - FAN BLADE | 1 | |
| PWA101212 REV NC | MASTER, CROSS SHROUD - FAN BLADE | 1 | |
| PWA101213 | BLOCK, SUPPORT - FAN BLADE CROSS SHROUD GAGE | 1 | |
| PWA101213 REV NC | BLOCK, SUPPORT - FAN BLADE CROSS SHROUD GAGE | 1 | |
| PWA101970 | CART - STORAGE, FAN BLADES | 1 | |
| PWA102275 | PIN,DRIFT-FAN BLADE FAIRING | 1 | |
| PWA102757 | WEDGE BLOCK-FAN BLADE, HPC | 5 | |
| PWA102828 | COMPRESSOR-LPC FAN BLADE | 5 | |
| PWA103594 | CART STORAGE - FAN BLADES | 1 | |
| PWA105109 | PULLER KNOCKER - FAN BLADE SPACER | 1 | |
| PWA105132 | PULLER KNOCKER - FAN BLADE SPACER | 1 | |
| PWA105609 | PROBE ECI FAN BLADE LE | 1 | |
| PWA105767 | FIXTURE REMOVE - LPC FAN BLADE LOCK | 1 | |
| PWA106181 | PULLER KNOCKER - FAN BLADE SPACER | 1 | |
| PWA106201 | COMPRESSOR-FAN BLADE LOCK | 1 | |
| PWA106340 | GAGE CHECKING-FAN BLADE TIP CLEARANCE | 1 | |
| PWA107214 | GAGE CHECKING-FAN BLADE TIP CLEARANCE | 3 | |
| PWA107918 | COMPRESSOR MECHANICAL - ENGINE ASSEMBLY, LPC FAN BLADE | 1 | |
| PWA107919 | WEDGE MECHANICAL - ENGINE ASSEMBLY, LPC FAN BLADE LOCK | 1 | |
| PWA111016 | PULLER HAND FAN BLADE | 4 | |
| PWA111529 | FIXTURE INSTALLATION FAN BLADE LOCK | 5 | |
| PWA115061 | FAN BLADE FAIRING PIN PULLER | 2 | |
| PWA115244 | FAN FRONT BLADE LOCK FIXTURES | 2 | |
| PWA115424 | FAN BLADE HAND WEDGE | 4 | |
| PWA12632 | FIXTURE INSPECTION BLADE FAN ROTOR | 2 | |
| PWA211565 | CONTAINER, SHIPPING - FAN BLADE | 1 | |
| PWA211814 | FAN BLADE INSP REF CARD | 1 | |
| PWA212377 | DRILL GUIDE - FAN BLADE | 2 | |
| PWA25712 | SHIM - ENG ASSY FAN BLADE TIPS_[PWA25712] | 2 | |
| PWA25757 | HOLDER SCRAPE INSERT FAN BLADE | 5 | |
| PWA26319 | GAGE-FEELER FAN BLADE TIP | 1 | |
| PWA26676 | FIXTURE FAN BLADE | 1 | |
| PWA27531 | FIXTURE,SUPPORTING - FAN BLADE R/I_[PWA27531] | 1 | |
| PWA27533 | FIXTURE - LOADING FAN BLADE | 1 | |
| PWA27831 | HOLDER, MOMENT WT - 1STG FAN BLADE_[PWA27831] | 1 | |
| PWA28379 | RETAINER - FAN BLADES | 2 | |
| PWA28393 | RETAINER-FAN ROTOR BLADES | 5 | |
| PWA28403 | CRACK STANDARD-EDDY CURRENT 1ST STAGE FAN BLADE | 4 | |
| PWA28403B | PRATT & WHITTNEY 1ST STAGE FAN BLADE CALIBRATION STANDARD. Includes Test Report and Certificate of Conformance. | 1 | |
| PWA28404 | PROBE-EDDY CURRENT 1ST STAGE FAN BLADE LEAD.TRAIEDGE | 3 | |
| PWA28404E | PROBE-EDDY CURRENT 1ST STAGE FAN BLADE LEAD.TRAIEDGE | 1 | |
| PWA28443 | PROBE-EDDY CURRENT ENGINE ASSEMBLY FAN BLADE | 2 | |
| PWA28443A | PROBE-EDDY CURRENT ENGINE ASSEMBLY FAN BLADE | 1 | |
| PWA28818 | GAGE - FAN BLADE L/E & T/E THICKNESS_[PWA28818] | 2 | |
| PWA29246 | FIXTURE-SUPPORT FAN BLADE REPLACEMENT | 1 | |
| PWA29646 | GAUGE - INSPECTION, FAN BLADE AND LPT STAGE 3-6 LEADING EDGE RADII | 2 | |
| PWA29819 | CUTTER - FAN BLADE FORMING L/E_[PWA29819] | 1 | |
| PWA29836 | TEMPLATE-SIGHT FAN BLADE L.E. ANGLE | 1 | |
| PWA29837 | TEMPLAT,MARKING - 1ST STG FAN BLADE_[PWA29837] | 1 | |
| PWA29875 | FILLER GAGE- FAN BLADE (JT9D-7Q)_[PWA29875] | 3 | |
| PWA29914 | CUTTER - FAN BLADE L.E. CONTOUR | 1 | |
| PWA33000 | MASTER-MIDSPAN SHROUD COMPR. FAN BLADE 1ST STG. | 1 | |
| PWA45877 | ENG FAN BLADE RUBSTRAP | 1 | |
| PWA46050 | GAGE INSPECTION FAN BLADE RUBSTRIP FOR DAMAGE | 1 | |
| PWA46083 | HOLDER, CUTTER - FAN BLADE FORMING L.E.RADIUS | 1 | |
| PWA46083 REV NC | HOLDER, CUTTER - FAN BLADE FORMING L.E.RADIUS | 1 | |
| PWA46084 | CUTTER - FAN BLADE FRMG LEAD EDGE (.009 RADIUS) | 1 | |
| PWA46084 REV A | CUTTER - FAN BLADE FORMING LEADING EDGE (.009 RADIUS) | 1 | |
| PWA46085 | HOLDER, CUTTER - FAN BLADE FORMING L.E. CHAMFER | 1 | |
| PWA46085 REV A | HOLDER, CUTTER - FAN BLADE FORMING L.E. CHAMFER | 1 | |
| PWA46086 | CUTTER - FAN BLADE FORMING LE (15 DEGREE CHAMFER) | 1 | |
| PWA46086 REV NC | CUTTER - FAN BLADE FORMING L.E.(15 DEGREE CHAMFER) | 1 | |
| PWA46087 | CUTTER - FAN BLADE FORMING LE (22 DEGREE CHAMFER) | 1 | |
| PWA46087 REV NC | CUTTER - FAN BLADE FORMING L.E. (22 DEGREE CHAMFER) | 1 | |
| PWA46131 | CUTTER, FRMG LE-2ND STAGE FAN BLADE (.001 RADIUS) | 1 | |
| PWA46131 REV NC | CUTTER, FORMING L.E.E-2ND STAGE FAN BLADE (.001 RADIUS) | 1 | |
| PWA46132 | CUTTER,FORMING LE- 2ND STAGE FAN BLADE (CHAMFER) | 1 | |
| PWA46132 REV NC | CUTTER,FORMING L.E.- 2ND STAGE FAN BLADE (CHAMFER) | 1 | |
| PWA46316 | CUTTER - FAN BLADE FRMG LEADING EDGE (.014 RADIUS) | 1 | |
| PWA46316 REV D | CUTTER - FAN BLADE FORMING LEADING EDGE (.014 RADIUS) | 1 | |
| PWA46318 | CUTTER - FAN BLADE LEADING EDGE CHAMFER | 2 | |
| PWA46318 REV B | CUTTER - FAN BLADE LEADING EDGE CHAMFER | 1 | |
| PWA46319 | GAGE, INPROCESS INSPECT - FAN BLADE L.E. REWORK | 2 | |
| PWA46319 REV NC | GAGE, INPROCESS INSPECT - FAN BLADE L.E. REWORK | 1 | |
| PWA463I8 | CUTTER - FAN BLADE LEADING EDGE CHAMFER | 1 | |
| PWA463I9 | GAGE, INPROCESS INSPECT - FAN BLADE L.E. REWORK | 1 | |
| PWA75909 | PROBE-1ST STAGE FAN BLADE | 3 | |
| PWA75909A | PROBE-1ST STAGE FAN BLADE | 1 | |
| PWA84314 | REFERENCE STANDARD FOR EDDY CURRENT TEST ON PW2000 SERIES ENGINE FAN BLADES | 1 | |
| PWA85035 | FIXTURE-SUPPORT FAN BLADE REPLACEMENT | 7 | |
| PWA86299 | PROBE USI FAN BLADE | 1 | |
| PWA86447 | HOLDER MOMENT WEIGHT BLADE FAN | 1 | |
| PWA86651 | CART STORAGE - FAN BLADES | 1 | |
| PWA87055 | FIXTURE, SUPPORT - FAN BLADE REMOVAL | 5 | |
| PWA87055-1 | FIXTURE, SUPPORT - FAN BLADE REMOVAL | 1 | |
| PWA87251 | CART, STORAGE - FAN BLADES | 1 | |
| PWA88617 | COMPRESSOR-FAN BLADE LOCK | 5 | |
| PWC40014 | LOADING- BLADES-FAN | 1 | |
| PWC60640 | GAGE EROSION BLADE FAN | 3 | |
| PWC61996 | FAN BLADE RETAINING | 3 | |
| PWC66581 | WEDGE, FAN BLADE | 6 | |
| RB6796950-7 | PULLER PLATEFORMS FAN BLADES | 3 | |
| RC5128G02 | GAGE KIT,BLADE,FAN-BASE | 1 | |
| RC5128P04 | FAN BLADE PIN BASE COAT GAGE | 1 | |
| RC5128P10 | FAN BLADE PIN BASE COAT GAGE | 1 | |
| RF170066 | WRENCH – FAN BLADES RING REMOVAL | 1 | |
| RF171464 | PULLER FAN BLADES SPACER | 1 | |
| RF178652 | PULLER FAN BLADES SPACER | 1 | |
| RRT050245 | DUMMY FANSHAFT FOR BLADES & FAN DISC BALANCE | 1 | |
| RRT050249 | TRANSPORT FULL FAN INCL BLADES (TILTS) | 1 | |
| RRT061241 | FAN BLADE IMMOBILISER / CHOCK | 3 | |
| RRT076135 | FAN BLADE HOLDER | 1 | |
| RRT115160 | INSPECTION KIT - TRENT 700 ULTRA SONIC PHASED ARRAY FAN BLADE (WATER COUPLED) | 1 | |
| RRT1151600 | TRENT 700 FAN BLADE ULTRASONIC INSPECTION KIT | 1 | |
| RRT115161 | FAN BLADE SCANNING FRAME | 1 | |
| RRT115168 | FAN BLADE HOLDER STAND | 1 | |
| S0496-001-001AM | FAN BLADE STAND 737 | 1 | |
| SB211-72-C878 | FAN BLADE ROOT ULTRASONIC TOOL | 1 | |
| SBRB211-72-C545 | FAN BLADE ANNULAS TOOL | 1 | |
| SBRB211-72-C879 | FAN BLADE ROOT ULTRASONIC INSP.K TOO | 1 | |
| SPL-11481 | FAN BLADE REAR SHANK GAUGE | 1 | |
| SPL-14662 | PULLER - FAN BLADE SPACER | 1 | |
| SPL-14677 | RACK - FAN BLADE STORAGE | 1 | |
| SPL-15042 | PULLER - FAN BLADE SPACER | 1 | |
| SPL-15594 | SOFTWARE, MAPPING - FAN BLADE | 1 | |
| SPL-16077 | FAN BLADE SPACER PULLER | 1 | |
| SPL-18784 | ZONING TOOL, ROOT RADIUS - FAN BLADE | 1 | |
| SPL-2193 | PULLER - SPACERS, FAN BLADE 856A3707G06 856A3905G0 | 1 | |
| TEK-7002/4F | PROBE-EDDY CURRENT 1ST STAGE FAN BLADE LEAD.TRAIEDGE | 1 | |
| TEK-7009 | PROBE-EDDY CURRENT ENGINE ASSEMBLY FAN BLADE | 1 | |
| TEK-9117 | CRACK STANDARD-EDDY CURRENT 1ST STAGE FAN BLADE | 1 | |
| TEK-C73049933 | Fan Blade Probe with dual bnc's | 1 | |
| TH100-B | FAN BLADE TAP TEST TOOL | 1 | |
| UT1930 | FAN BLADE ERROSION INSP TOOL | 1 | |
| UT1930-1 | FAN BLADE ERROSION INSP TOOL | 1 | |
| UT1930-2 | FAN BLADE ERROSION INSPECTION | 1 | |
| UT2000 | FAN BLADE TEST KIT | 1 | |
| V2500 | KIT-FAN BLADE ROOT CRACK | 2 | |
| V2500 FAN BLADE L/EDGE | V2500 FAN BLADE L/EDGE INSP KIT | 1 | |
| 956A8051G02 | PULLER FAN BLADE SPACER | 6 | |
| PWA26319 | GAGE - FEELER FAN BLADE TIP | 1 | |
| PWA29246 | FIXTURE - SUPPORT FAN BLADE REPLACEMENT | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
