| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 7637987-1 | EDDY CURRENT | 1 | |
| 7637987-9 | EDDY CURRENT | 1 | |
| 9403410 | EDDY CURRENT | 1 | |
| 98A53803014001 | EDDY CURRENT | 3 | |
| 99A53003001101 | Eddy Current | 8 | |
| 99A53107215000 | EDDY CURRENT | 5 | |
| 99A53307249000 | EDDY CURRENT | 1 | |
| 99A53307281000 | EDDY CURRENT | 2 | |
| 99A53307294000 | EDDY CURRENT | 2 | |
| 99A53307301000 | EDDY CURRENT | 2 | |
| 99A53403005001 | EDDY CURRENT | 1 | |
| 99A53403007000 | EDDY CURRENT | 2 | |
| 99A55109001000 | EDDY CURRENT | 1 | |
| 99A55109004000 | EDDY CURRENT | 1 | |
| 99A57204362000 | EDDY CURRENT | 3 | |
| 99A57204391001 | EDDY CURRENT | 2 | |
| A27288 | EDDY CURRENT | 3 | |
| ELOSTEST M2 | EDDY CURRENT | 1 | |
| ELOTEST M3-D | EDDY CURRENT | 2 | |
| LPEN95-6 | EDDY CURRENT | 1 | |
| NDT 520 | EDDY CURRENT | 1 | |
| NORTEC 600 | EDDY CURRENT | 2 | |
| ROHMANN ELOTEST M3 | EDDY CURRENT | 1 | |
| SB09270209-5 | EDDY CURRENT | 1 | |
| SB09530016-5 | EDDY CURRENT | 2 | |
| SB09530186-9 | EDDY CURRENT | 1 | |
| SRS-0824A | EDDY CURRENT | 3 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) BONDMASTER 600 | EDDY CURRENT FLAW DETECTOR (CALIBRATION) | 1 | |
| (CALIB) BONDMASTER600 | EDDY CURRENT FLAW DETECTOR (CALIBRATION) | 1 | |
| (CALIB) N600D-KIT-KE | NORTEC EDDY CURRENT FLAW DETECTOR (CALIBRATION) | 1 | |
| (CALIB) PHASEC 2D | EDDY CURRENT TEST SET (CALIBRATION) | 1 | |
| 04/01/6200 | EDDY CURRENT TEST PROBES | 1 | |
| 072-100-043 | EDDY CURRENT PHASE 2D | 1 | |
| 1.837.01-2100 | EDDY CURRENT PROBES FOR DEFECTOMETER M 1.837 | 1 | |
| 1000 | EDDY CURRENT EQUIPMENT NORTEC | 1 | |
| 100002P | COM-14991 - INSTRUMENT - EDDY CURRENT, PORTABLE: | 1 | |
| 1005 | FLOW DETECTOR, EDDY CURRENT | 6 | |
| 10471 | EDDY CURRENT CALIBRATION BLOCK | 1 | |
| 10499 | EDDY CURRENT CALIBRATION BLOCK | 1 | |
| 105P4F | PROBE EDDY CURRENT 500KHZ | 1 | |
| 106P4F | EDDY CURRENT PROBE | 2 | |
| 10RS.47 | MD-11 Eddy current reference standard Section 2-1 Page 1 Figure 1.21 | 1 | |
| 113-226-000 | EDDY CURRENT CALIBRATION BLOCK | 1 | |
| 114-262 | EDDY CURRENT PROBE-FOR EXAMINING P/N 10-1457 | 1 | |
| 121P1A | EDDY CURRENT PROBE | 1 | |
| 1276-784 | EDDY CURRENT INSTRUMENT | 1 | |
| 12S013-5/TF | PROBE EDDY CURRENT | 1 | |
| 131387 | EDDY CURRENT CALIBRATION TEST BLOCK | 1 | |
| 132351 | EDDY CURRENT REFERENCE STANDARD | 1 | |
| 1437569 | EDDY CURRENT FLAW DETECTOR | 1 | |
| 145-44131-001 | REFERENCE STANDARD, GENERAL EDDY CURRENT TESTING, ALUMINUM ALLOY | 6 | |
| 145-44131-003 | REFERENCE STANDARD, GENERAL EDDY CURRENT TESTING, STEEL ALLOY | 3 | |
| 145-44131-005 | REFERENCE STANDARD, GENERAL EDDY CURRENT TESTING, TITANIUM ALLOY | 3 | |
| 145T09065-401 | REFERENCE STANDARD NDI (STAINLESS STEEL) -EDDY CURRENT TESTING | 1 | |
| 16/03/6200 | EDDY CURRENT TEST PROBES | 1 | |
| 160P4NFE | Eddy Current Probe | 1 | |
| 1704 | EDDY CURRENT CALIBRATION BLOCK | 6 | |
| 163139 | INSPECTION MASTER, EDDY CURRENT | 1 | |
| 186-27MM | Eddy current standard | 1 | |
| 186-40MM | Eddy current standard | 1 | |
| 1902510 | EDDY CURRENT CALIBRATION STANDARD ALUMINUM | 1 | |
| 1904015-1 | EDDY CURRENT INSTRUMENT;MINIMITE | 1 | |
| 19EIIS | EDDY CURRENT NORTEC -19E2 | 1 | |
| 19EIIS P03196 | EDDY CURRENT NORTEC -19E2 | 1 | |
| 19EIISP03196 | EDDY CURRENT NORTEC -19E2 | 1 | |
| 1G962-42500 | NORTEC 600 EDDY CURRENT UNIT(CONDUCTIVITY) | 1 | |
| 2-069-69-0002 | EDDY CURRENT CONDUCTIVITY PROBE | 1 | |
| 2-164 | EDDY CURRENT EQUIPMENT DEFECTOMETER | 3 | |
| 2-164-501 | AIRBUS EDDY CURRENT CALIBRATION BLOCK 4340 STEEL, 51-10-00-250-801 and 51-63-991-001 PAGE 601 FIGURE 601. Includes Test Report and Certificate of Conformance. | 4 | |
| 2-832-01-2520 | EDDY CURRENT PROBE HIGH FREQUENCY ABSOLUTE | 3 | |
| 2-832-02-2455 | EDDY CURRENT PROBE 2-40KHZ | 3 | |
| 2-835-01-3000 | FE PROBE - EDDY CURRENT-500 HZ-250 KHZ | 1 | |
| 2-835-07-6901 | EDDY CURRENT TEST BLOCK | 2 | |
| 2-837 | EDDY CURRENT DEFECTOMETER | 1 | |
| 2-887-01-9313S | EDDY CURRENT ROTO CALIBRATION REST BLOCK | 6 | |
| 2-887-01-9314S | EDDY CURRENT ROTO CALIBRATION REST BLOCK | 5 | |
| 2-887-01-9315S | EDDY CURRENT ROTO CALIBRATION REST BLOCK | 4 | |
| 2-887-01-9316S | EDDY CURRENT ROTO CALIBRATION REST BLOCK | 3 | |
| 2.0837.81 | EDDY CURRENT TESTER | 1 | |
| 2.835-07-6902 | EDDY CURRENT PROBE | 1 | |
| 2.835-74-6901 | EDDY CURRENT PROBE | 1 | |
| 2000 | EDDY CURRENT EQUIPMENT NORTEC | 5 | |
| 201P10XF | Eddy Current Probe 201P10XF 500kHz | 1 | |
| 205P10XF | Eddy Current Probe 205P10XF 500kHz | 1 | |
| 205P4 | EDDY CURRENT PROBE | 1 | |
| 206P2 | PROBE-EDDY CURRENT FREQUENCY | 1 | |
| 208 FRONT SPAR | CESSNA / TEXTRON AVIATION EDDY CURRENT REFERENCE STANDARD 208 FRONT SPAR LOWER CAP. Drawing NO. 2683201 | 1 | |
| 208 REAR SPAR | CESSNA / TEXTRON AVIATION EDDY CURRENT REFERENCE STANDARD 208 REAR SPAR LOWER CAP. Drawing NO. 2683202 | 1 | |
| 2100-95-30 | TESTER, EDDY CURRENT | 1 | |
| 210816 | CABLE ASS'Y BNC TO MD (NDT EDDY CURRENT) | 2 | |
| 215360A | TETS SET, EDDY CURRENT 220 VOLTS | 1 | |
| 222845 | EDDY CURRENT WHEEL TEST KIT | 1 | |
| 23-55ST | CALIBRTATION SET, EDDY CURRENT | 1 | |
| 235502 | CASA CN-235 EDDY CURRENT REFERENCE STANDARD PART 5 57-10-05 PAGE 510 FIGURE 504b. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| 2870020-001 | EDDY CURRENT STANDARD, WINGLET | 2 | |
| 291005 | NDT LOCATOR HOCKING UH EDDY CURRENT | 1 | |
| 29A028 | EDDY CURRENTY PROBE | 4 | |
| 29A029 | EDDY CURRENT REF BLOCK - (3 SLOTS) ALUMINIUM | 5 | |
| 29A032 | HFEC EDDY CURRENT BLOCK TITANIUM | 3 | |
| 29A049 | EDDY CURRENTY PROBE | 2 | |
| 29A0491 | HFEC EDDY CURRENT BLOCK STAINLESS | 1 | |
| 29I005 | HIGH FREQUENCY EDDY CURRENT UNIT | 1 | |
| 29PA53 | EDDY CURRENT KNIFE PROBE | 1 | |
| 2C91346G01 | KIT - EDDY CURRENT INSP. | 1 | |
| 301P52XF | Eddy Current Probe 301P52XF 500kHz | 1 | |
| 305P12XF | Eddy Current Probe 305P12XF 500kHz | 1 | |
| 309P110XF | Eddy Current Probe 309P110XF 500kHz | 1 | |
| 309P34 | PROBE EDDY CURRENT | 1 | |
| 309P510XF | Eddy Current Probe 309P510XF 500kHz | 1 | |
| 30R0122G01 | INSPECTION KIT, EDDY CURRENT, HPC BLADES 1-3, F414 | 1 | |
| 310P14 | 2MHZ EDDY CURRENT PROBE | 1 | |
| 310P24NFE | Eddy Current Probe | 1 | |
| 310P3 | PROBE EDDY CURRENT | 1 | |
| 310P34 | PROBE EDDY CURRENT | 1 | |
| 310P38NFE | Eddy Current Probe | 1 | |
| 313P14FE/NFE | Eddy Current Probe | 1 | |
| 314P14F | EDDY CURRENT PROBE, 2MHZ, SHIELDED, CRANKED | 1 | |
| 314P14FE/NFE | Eddy Current Probe | 1 | |
| 314P24 | PROBE EDDY CURRENT | 1 | |
| 314P44 | EDDY CURRENT PROBE, 2MHZ, SHIELDED, CRAN | 1 | |
| 314P44F | EDDY CURRENT PROBE | 1 | |
| 33I012 | PHASEC 2200 UNIVERSAL EDDY CURRENT INSTRUMENT | 1 | |
| 3550 | PROBE, EDDY CURRENT | 2 | |
| 341002 | Eddy current unit (Wheel Scan E) | 1 | |
| 352P1BNFE | Eddy Current Probe | 1 | |
| 386B | Eddy current standard | 1 | |
| 389C | Eddy current standard | 1 | |
| 397-4752 | NORTEC 600 EDDY CURRENT UNIT | 1 | |
| 39A031 | AA BATTERY PACK (FOR EDDY CURRENT FLAW DETECTOR) | 1 | |
| 401003 | PHASEC2D-DUAL FREQUENCY EDDY CURRENT | 1 | |
| 401013 | EDDY CURRENT TEST SET MODEL PHASEC3D | 1 | |
| 40A001 | EDDY CURRENT PROBE CABLE | 4 | |
| 40A030 | BATTERY FOR PAHASEC 3D EDDY CURRENT TOOLS | 1 | |
| 40A035 | CHARGER FOR PAHASEC 3D EDDY CURRENT TOOLS | 1 | |
| 40A100 | EDDY CURRENT DRIVE UNIT MINIATURE | 3 | |
| 40A100M | EDDY CURRENT DRIVE UNIT MINIATURE | 1 | |
| 40I003 | EDDY CURRENT FLAW DETECTOR | 1 | |
| 40I013 | EDDY CURRENT TEST 3PHASE | 1 | |
| 500D | EDDY CURRENT INSTRUMENT OLYMPUS NORTEC | 1 | |
| 57-12-501 | RIGHT AND LEFT WING REAR BEAM AT BL 35.8 — EDDY CURRENT INSPECTION CALIBRATION STANDARD, 1159W40007-1NDT (GULFSTREAM) | 1 | |
| 57-12-502 | RIGHT AND LEFT WING REAR BEAM AT RBS 103.3 — EDDY CURRENT INSPECTION PROBE :SPO 5053 PROBE :SPO 5054 CALIBRATION STANDARD, 1159W40005-1NDT (GULFSTREAM | 1 | |
| 57-12-504 | RIGHT AND LEFT WING REAR BEAM AT RBS 230.1 — EDDY CURRENT INSPECTION CALIBRATION STANDARD, 1159W40063-1NDT (GULFSTREAM | 1 | |
| 600 D-PEE | NORTEC 600 EDDY CURRENT FLAW DETECTOR | 1 | |
| 600D-PEE | OLYMPUS EDDY CURRENT FLAW DETECTOR (NORTEC) | 1 | |
| 602-128 | PROBE - THICKNESS MEASUREMENT, EDDY CURRENT | 1 | |
| 602-814 | INSTRUMENT - THICKNESS MEASUREMENT, EDDY CURRENT TEST METHOD | 1 | |
| 602-816 | INSTRUMENT - THICKNESS MEASUREMENT, EDDY CURRENT TEST METHOD | 1 | |
| 603-693 | INSTRUMENT - THICKNESS MEASUREMENT, EDDY CURRENT TEST METHOD | 1 | |
| 603-694 | INSTRUMENT - THICKNESS MEASUREMENT, EDDY CURRENT TEST METHOD | 1 | |
| 604-142 | PROBE - THICKNESS MEASUREMENT, EDDY CURRENT METHOD | 3 | |
| 604-285 | INSTRUMENT - THICKNESS MEASUREMENT, EDDY CURRENT TEST METHOD | 1 | |
| 604-299 | INSTRUMENT - THICKNESS MEASUREMENT, EDDY CURRENT TEST METHOD | 1 | |
| 605-023 | EDDY CURRENT THICKNESS MEASUREMENT INSTRUMENT | 1 | |
| 610-045-003 | EDDY CURRENT PENCIL PROBE | 1 | |
| 610-057-076 | HIGH FREQUENCY EDDY CURRENT PROBE | 2 | |
| 610-085-009 | EDDY CURRENT PENCIL PROBE | 1 | |
| 6100 SERIES | PROBES, EDDY CURRENT | 1 | |
| 6100-1-4BNC | PROBE EDDY CURRENT | 1 | |
| 615-0015-018-781 | EDDY CURRENT CABLE | 1 | |
| 61562 | EDDY CURRENT DEVICE | 1 | |
| 615P016F035 | DYNAMIC ROTATING METAL PROBE EDDY CURRENT TOOLS | 2 | |
| 615P04F035 | DYNAMIC ROTATING METAL PROBE EDDY CURRENT TOOLS | 1 | |
| 6200 SERIES | PROBES, EDDY CURRENT | 1 | |
| 6270-1 1.55 | EDDY CURRENT PROBE (BARREL NUT) | 1 | |
| 6270-3 1.68 | EDDY CURRENT FLEX SHAFT PROBE | 1 | |
| 6270-4 1.68 | EDDY CURRENT FLEX SHAFT PROBE | 1 | |
| 6270-R1 | EDDY CURRENT REFERENCE STANDARD | 1 | |
| 6270-R2 | EDDY CURRENT REFERENCE STANDARD | 1 | |
| 6300 SERIES | PROBES, EDDY CURRENT | 1 | |
| 6310-90-1/2-1/8 SHLD | EDDY CURRENT PROBE 100KHZ - 500KHZ ABSOLUTE 90 | 1 | |
| 640-010-153 | EDDY CURRENT SLIDING PROBE CABLE | 1 | |
| 640-010-301 | EDDY CURRENT CABLE | 1 | |
| 640-025-003 | GE EDDY CURRENT WELD INSPECTION PROBE KIT | 1 | |
| 6412-144 | REFERENCE STD-EDDY CURRENT | 1 | |
| 6625-01-515-6713 NORTEC 2000D | EDDY CURRENT INSTRUMENT NORTEC 2000D | 1 | |
| 6AL-6V-2SN-Ti | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" +/-.001 DEEP, (MAX WIDTH .005"), 6AL-6V-2SNTi | 1 | |
| 700P11A | EDDY CURRENT PROBE | 1 | |
| 7075-T6 | REFERENCE STANDARD, GENERAL EDDY CURRENT TESTING, ALUMINUM ALLOY | 1 | |
| 7374 | EDDY CURRENT BOLT HOLE STANDARD BLOCK (7075-T6 ALUMINUM) | 1 | |
| 7637987-9 | Eddy Current Inspection Reference standard | 1 | |
| 7937739-10 | TESTER, EDDY CURRENT | 1 | |
| 7937739-30 | TESTER, EDDY CURRENT | 1 | |
| 7947479-10 | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also co | 3 | |
| 7947479-10 I | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also co | 1 | |
| 7947479-10 S | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also co | 1 | |
| 7947479-10 Ti | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also co | 1 | |
| 7947479-10/17-4PH | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also co | 1 | |
| 7947479-10/304SS | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also co | 1 | |
| 813P014NFE | Eddy Current Probe | 1 | |
| 815P195 | EDDY CURRENT PROBE | 1 | |
| 856A2682 | EDDY CURRENT INSPECTION KIT | 1 | |
| 856A2682G01 | EDDY CURRENT INSTRUMENT | 2 | |
| 856A2682G02 | EDDY CURRENT INSTRUMENT | 1 | |
| 856A2691G01 | EDDY CURRENT INSP KIT REAR FRAME B73 | 26 | |
| 856A2692 | EDDY CURRENT INSP KIT | 1 | |
| 856A2692G01 | EDDY CURRENT INSPECTION, KIT FOR CFM56-7B TRF | 1 | |
| 856A2692G03 | EDDY CURRENT TRF INSPECTION KIT | 1 | |
| 856A2692G04 | EDDY CURRENT INSPECTION KIT | 1 | |
| 856A2862G01 | INSPECTION KIT EDDY CURRENT, | 2 | |
| 856A4623G01 | EDDY CURRENT INSPECTION KIT OF FAN DISK DOVETAIL SLOTS | 1 | |
| 856A4623G02 | EDDY CURRENT INSPECTION KIT OF FAN DISK DOVETAIL SLOTS | 1 | |
| 856A4649 | INSPECTION KIT EDDY CURRENT | 1 | |
| 856A5684G01 | EDDY CURRENT INSPECTION KIT FOR FAN DISK BORE (KIT) | 1 | |
| 856A5684G02 | EDDY CURRENT KIT | 1 | |
| 856A5684G03 | EDDY CURRENT INSPECTION KIT FOR FAN DISK BORE (KIT) | 1 | |
| 856A5684G04 | EDDY CURRENT INSPECTION KIT FOR FAN DISK BORE | 1 | |
| 856A5684G05 | EDDY CURRENT INSPECTION KIT FOR FAN DISK BORE (KIT) | 1 | |
| 856A5932 | (RT) EDDY CURRENT KIT | 1 | |
| 856A5932G01 | Eddy Current Inspection Kit for Fan Disk Dovetail Slots (kit) | 1 | |
| 856A6635G01 | EDDY CURRENT INSPECTION KIT FOR FAN DISK DOVETAIL SLOTS | 1 | |
| 856A6643G01 | EDDY CURRENT INSPECTION KIT FOR FAN BLADES 5B 8 | 1 | |
| 8835-01-455-9520 | EDDY CURRENT FLAW DETECTOR | 1 | |
| 8900003 R03 | BASIC EDDY CURRENT MACHINE NORTECH 500 | 1 | |
| 9020266 REV-B | "EDDY CURRENT BOLT HOLE INSPECTION KIT " | 1 | |
| 9020266REV-B | EDDY CURRENT BOLT HOLE INSPECTION KIT | 1 | |
| 9020268 R-B | EDDY CURRENT INSPECTION KIT | 1 | |
| 94032 | EDDY CURRENT CABLE | 1 | |
| 99108 | PROBE, EDDY CURRENT | 1 | |
| 9020075 | 19/RA ROTARY SCANNER ; EDDY CURRENT INSTRUMENT | 1 | |
| 9020207 | EDDY CURRENTROTATING SCANNER - RA-2000 | 1 | |
| 9020210 | EDDY CURRENT TESTER NORTEC TESTER 2000D | 1 | |
| 9020260 | MINI MITE EDDY CURRENT ROTATING SCANNER (OLYMPUS NDT OR EQUIVALENT) | 1 | |
| 9122083 | EDDY CURRENT CABLE | 4 | |
| 9122244 | CABLE, 6 FOOT LENGTH, BRIDGE COIL CONFIGURATION. 16 PIN LEMO TO FISCHER/LEMO TRIAX (SPO-6472) FOR EDDY CURRENT (NORTEC500S) | 2 | |
| 9203481 | PROBE EDDY CURRENT | 1 | |
| 9213011 | EDDY CURRENT SPOT PROBE | 1 | |
| 9213013 | EDDY CURRENT PROBE OLYMPUS P/100KHZ-500KHZ/A/905/6 | 1 | |
| 9216657 | PROBE, EDDY CURRENT | 1 | |
| 9216658 | PROBE SET,EDDY CURRENT | 1 | |
| 9217153 | EDDY CURRENT HOLE PROBE | 1 | |
| 9217154 | EDDY CURRENT HOLE PROBE | 1 | |
| 9217156 | EDDY CURRENT HOLE PROBE | 1 | |
| 9217157 | EDDY CURRENT HOLE PROBE | 1 | |
| 9217158 | EDDY CURRENT ROTARY PROBE | 1 | |
| 9217159 | EDDY CURRENT HOLE PROBE | 1 | |
| 9217160 | EDDY CURRENT HOLE PROBE | 1 | |
| 9219979 | FISHER CONNECTOR ROTATING EDDY CURRENT PROBE | 1 | |
| 9219980 | FISHER CONNECTOR ROTATING EDDY CURRENT PROBE | 1 | |
| 9219983 | FISHER CONNECTOR ROTATING EDDY CURRENT PROBE | 1 | |
| 9222164 | PROBE,EDDY CURRENT | 3 | |
| 9222290 | EDDY CURRENT ROTARY PROBE | 1 | |
| 9222340 | PROBE,EDDY CURRENT | 2 | |
| 9222341 | EDDY CURRENT TESTER PROBE 480KHZ | 1 | |
| 9222360 | PROBE,EDDY CURRENT | 2 | |
| 9230071 | PROBE, EDDY CURRENT | 1 | |
| 9230078 | EDDY CURRENT HOLE PROBE | 1 | |
| 9230156 | PROBE,EDDY CURRENT | 1 | |
| 9230157 | PROBE EDDY CURRENT | 1 | |
| 9230159 | EDDY CURRENT TESTER SPARES: PROBE UNIVERSAL ROTARY HOLE (.750-.812) | 1 | |
| 9230259 | 16-PIN LEMO TO MICRODOT (EDDY CURRENT CABLE) | 2 | |
| 9230492 | EDDY CURRENT SLIDING PROBE | 2 | |
| 9230585 | 16-PIN LEMO TO MICRODOT (EDDY CURRENT CABLE) | 1 | |
| 9230845 | 16-PIN LEMO TO MICRODOT (EDDY CURRENT CABLE) | 1 | |
| 9231101 | PROBE,EDDY CURRENT | 1 | |
| 9403360 | PROBE,EDDY CURRENT | 1 | |
| 9744836 | EDDY CURRENT INSTRUMENT AND PROBE | 1 | |
| 10024749 | EDDY CURRENT BOND TESTER | 1 | |
| 90252206 | PHASEC 3D EDDY CURRENT TEST 3PHASE | 1 | |
| 98A53803014001 | EDDY CURRENT A300 | 3 | |
| 98S55305011000 | EDDY CURRENT REFERENCE STANDARD | 2 | |
| 9970-958-574 | EDDY CURRENT PROBE A | 1 | |
| 9970-958-575 | EDDY CURRENT PROBE B | 1 | |
| 9970-958-576 | EDDY CURRENT PROBE | 1 | |
| 9970-958-576P01 | EDDY CURRENT SURFACE PROBE 90° DEGREES, 0.500 INCH | 1 | |
| 9970-958-577 | EDDY CURRENT PROBE D | 1 | |
| 9970-958-579 | EDDY CURRENT PROBE | 1 | |
| 99A53107215000 | EDDY CURRENT A300 | 5 | |
| 99A53307274000 | EDDY CURRENT LFEC CALIBRATION TEST BLOCK | 5 | |
| 99A53307281000 | EDDY CURRENT A300 | 2 | |
| 99A53307294000 | EDDY CURRENT A300 | 2 | |
| 99A53307301000 | EDDY CURRENT A300 | 2 | |
| 99A55109001000 | EDDY CURRENT A300 | 1 | |
| 99A55109004000 | EDDY CURRENT A300 | 1 | |
| 99A57204391001 | EDDY CURRENT A310 | 2 | |
| 99D54503005000 | EDDY CURRENT PHASEC 3D | 1 | |
| 9C1578G01 | EDDY CURRENT INSPECTION KIT | 1 | |
| A-E02010300 | EDDY CURRENT EQUIPMENT ELOTEST | 1 | |
| A27288 | Eddy Current Inspection Reference standard SB DC9-27A235 R03 | 3 | |
| A29-006 | LOCATOR UH-B (EDDY CURRENT TESTER) | 1 | |
| A29-006B | LOCATOR UH-B (EDDY CURRENT TESTER) | 1 | |
| ABL-.030-6/1-3MHZ | EDDY CURRENT BLADE PROBE, STRAIGHT SHAFT, .030"(7.62MM) THICK, 1-3MHZ WITH A 2MHZ CENTER FREQUENCY, | 1 | |
| ACN16-TF6-R | EDDY CURRENT CABLE | 1 | |
| ACSM100-.156 | EDDY CURRENT PROBE | 1 | |
| ACSM100-.187 | EDDY CURRENT PROBE | 1 | |
| ACSM100-.218 | EDDY CURRENT PROBE | 1 | |
| ACSM100-.250 | EDDY CURRENT PROBE | 1 | |
| AF-2039/TF | FORRESTER HIGH FREQUENCY EDDY CURRENT PROBE, 2-40 KHz, SHEILDED, ABSOLUTE REFLECTION, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4011 | EDDY CURRENT PROBE | 1 | |
| AF-4041 | EDDY CURRENT PROBE | 1 | |
| AF-4052 | Eddy Current Probe | 1 | |
| AF-4228/4F | EDDY CURRENT PROBE | 1 | |
| AF-5005 | HIGH FREQUENCY SPRING LOADED EDDY CURRENT SURFACE SPOT PROBE, REFLECTION 50-500KHz. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5009 | HIGH FREQUENCY EDDY CURRENT PROBE, DIFFERENTIAL, .200" DROP 10° CRANK. FREQUENCY: 25KHz-100KHz WITH TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5017 | HIGH FREQUENCY SURFACE SCAN EDDY CURRENT PROBE, SPRING LOADED | 1 | |
| AF-5018 | HIGH FREQUENCY I.D. SCAN EDDY CURRENT PROBE, SPRING LOADED | 1 | |
| AF-5088 | CUSTOM ABSOLUTE EDDY CURRENT SLIDING PROBE, .375" RADIUS WITH .120" WIDE FIN FOR GROOVE INSPECTION, SUPPLIED WITH A TOP MOUNTED TRIAX FISCHER CONNECTOR 25-100KHz. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5100L/2MHZ | CUSTOM EDDY CURRENT SURFACE PROBE LEFT HAND 1-3 MHz WITH MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5100R/2MHZ | CUSTOM EDDY CURRENT SURFACE PROBE RIGHT HAND 1-3 MHz WITH MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5113 | Custom Eddy Current Probe for clamp inspection grooves. Frequency 500KHz-1MHz. Triax Fischer connector, Reflection. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5123/4F | Custom Pivoting Eddy Current PROBE | 1 | |
| AF-5140 | Custom Eddy Current Encirling Probe, .890"Ø ID, 500KHz-1MHz Differential, Triax Fischer Connector. Inspecting ASTM A513 Type 5 Steel Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5141/TF | CUSTOM EDDY CURRENT PENCIL PROBE(DELRIN - BLACK ACETAL), STRAIGHT SHAFT WITH THE COIL CENTERED AT THE TIP .250"Ø, 50-500KHz UNSHIELDED WITH TRIAX FISCHER CONNECTOR, 3.0: LONG. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5165 | CUSTOM DUAL COIL EDDY CURRENT PROBE FOR GROOVE INSPECTION, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. REFERENCE: SLS-CRES-60D-GRV. | 1 | |
| AF-5173 | Custom Eddy Current Encirling Probe, 10mm (.3937"Ø) ID, 200KHz-2MHz Differential Supplied with a Triax Fischer Connector. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5173/2.25mm | Custom eddy current encircling probe for 2.25mm tube (outer diameter), inner diameter of coil housing 2.5mm, 50kHz – 500kHz, bridge differential, triax connector, include test report and certificate of conformance. | 1 | |
| AF-5173/4MM | Custom Eddy Current Encirling Probe, 4mm tube (outer diameter), 50KHz-500kHz, bridge differential, Supplied with a Triax Fischer Connector. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5173/7.5mm | Custom eddy current encircling probe for 7.25mm tube (outer diameter), inner diameter of coil housing 7.5mm, 50kHz – 500kHz, bridge differential, triax connector, include test report and certificate of conformance. | 1 | |
| AF-5215 | CUSTOM EDDY CURRENT EDGE HOLE PROBE, SPLIT END, 200KHz-500KHz, .213"Ø WITH A TRIAX FISCHER CONNECTOR, 4.0" WORKING LENGTH. | 1 | |
| AF-5221 | CUSTOM HIGH FREQUENCY EDDY CURRENT PROBE FOR EDGE DEFECT DETECTION FOR THE KC10 ARB SUPPORT FITTING. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5226 | CUSTOM MICRO INDEXING EDDY CURRENT SURFACE PROBE ASSEMBLY WITH 3 PROBE TIPS: 100KHz-300KHz, 500KHz, 1-3MHz. INCLUDES Includes Test Report and Certificate of Conformance. Reference: MD-11 Section 2-2 figure 2.7 PG.5. | 1 | |
| AF-5239 | Custom Eddy Current Pencil Probe with Plexiglass Collar, Absolute Bridge, Shielded, 1-2MHz, Supplied with a Triax Fischer Connector. Includes Test Report and Certificate of conformance. | 1 | |
| AF-5254 | Custom Nortec / Pratt & Whittney Eddy Current Probe, 2MHz, Dual "D'" Coil, .2.50mm, 5.6 UH Matching Inductance, Spring Loaded Tip, Differential / Bridge, Match phase angle and frequency as close as possible. Supplied with a Triax Fischer connector. | 1 | |
| AF-5283 | Custom Eddy Current Pencil Probe for SB 215-A476, .093"Ø Stainless Steel Shaft, Absolute Shielded, 3.0" Long Handle, 30° Crank Which Extends 3.0" from the Handle, 1.0" Drop, Frequency 100KHz-1MHz with an Operating Frequency of 100KHz, Supplied with a Mic | 1 | |
| AF-6005/150HZ | EDDY CURRENT PROBE | 1 | |
| AF-6006 | EDDY CURRENT PROBE | 1 | |
| AF-6012 | EDDY CURRENT PROBE | 1 | |
| AF-8000 | PROBE-EDDY CURRENT 1ST STAGE FAN BLADE LEAD.TRAIEDGE | 1 | |
| AF-8001 | PROBE - EDDY CURRENT, FIRST STAGE FAN BLADE (SPL-2183) | 1 | |
| AF-8001A | PROBE - EDDY CURRENT, FIRST STAGE FAN BLADE (SPL-2183) | 1 | |
| AF-9000/WSP.219 | EDDY CURRENT PROBE 450KHZ-2.5MHZ, .219 TIPØ, 2.5OL, .50THD | 1 | |
| AF-MBB403-7-1 | CUSTOM STAINLESS STEEL EDDY CURRENT ROTARY PROBE INCLUDING COLLAR, FREQUENCY 100KHz-2MHz WITH 4 PIN FISCHER CONNECTOR. REFERENCE: AIRBUS A300-600 FIGURE 603 PART 6 53-19-27 PAGE 604 PROCEDURE A. Includes Test Report and Certificate of Conformance. | 1 | |
| AFK-5300SE-7 | CUSTOM EDDY CURRENT FLEXIBLE SPRING SHAFT ROTARY PROBE KIT. .125"Ø to .500"Ø. INCLUDES THE FOLLOWING 7 PROBE PART NUMBERS. AF-5300-.125SE/1T-6L, AF-5300-.156SE/1T-6L, AF-5300-.187SE/1T-6L, AF-5300-.250SE/1T-6L, AF-5300-.312SE/1T-6L, AF-5300-.375SE/1T-6L, | 1 | |
| AFK-A | EDDY CURRENT ST | 1 | |
| AFK-AUR12SS-1 | Open Hole Eddy Current Probe Kit, total of 12 stainless steel rotary probes with a shaft length of 70mm long supplied with a universal 4 pin Fischer connector. Probe Diameters: 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2. Suppli | 1 | |
| AFK-EC-BH16 | Boeing Part 6 51-00-00 Proceedure 16 Eddy Current Bolt Hole Inspection Kit. Includes 15 Universal Rotating Split End scanner probes Supplied with a with a Universal 4 Pin Fischer Connector and 1 Calibration Standard with hole sizes ranging from .187"Ø to | 1 | |
| AFK-ECS6-1 | Eddy Current Surface Probe Kit. Includes 1 of each of the following Probes in a waterproof kit box with foam cutouts. ATPN-5, ATPN-5FX, ATPN-45-5, ATPN-45-5FX, ATPN-95-5, ATPN-95-5FX. Frequency range:50-500KHz.. All probes are supplied with a Triax Fische | 1 | |
| AFK-ECS6MD | Eddy Current Surface Probe Kit. Includes 1 of each of the following Probes in a waterproof kit box with foam cutouts. APN-5, APN-5FX, APN-45-5, APN-45-5FX, APN-95-5, APN-95-5FX. Frequency range:50-500KHz.. All probes are supplied with a Microdot Connector | 1 | |
| AFK-RP09 | Custom Eddy Current Low Frequency Ring Probe Kit to include the following part numbers. ARP-1.40-.85-200H, ARP-1.35-.85-500H, ARP-1.25-.77-300H, ARP-1.0-.5-200H, ARP-.80/.40/200H, AF-4022, AF-4035,AF-4068, AF-4081, . Supplied with a waterproof kit box. I | 1 | |
| AFNDT-0212-1 | EDDY CURRENT SURFACE REFERENCE BLOCK. 2 EDM NOTCHES ( .012"D, .020"D, x .005" W +/- .001"), INCONEL 718. SIZE: 1.0"W x 3.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-032/10MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 10mm diameter hole. Corner EDM notch( 0.76mm long +/- 0.07 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-0512A | Eddy Current Hole and Surface Crack Standard: 7075-T651 Aluminum.. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-0512A. | Eddy Current Surface Crack Standard. EDM Notch Size: Total of 3 Notches, 0.005, 0.010, 0.020 Deep x .005W +/- .002 per 33B-1-2 WP 402 00. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-0512T | Eddy Current Hole and Surface Crack Standard: 6AL-4v Titanium.. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1015 | EDDY CURRENT CALIBRATION BLOCK 2024-T351, WITH .020"Lx.005"W COUNTERSINK SURFACE EDM NOTCH IN EACH HOLE.0.190-0.194, countersink: 100 degrees, 0.3748-0.3819 diameter....0.203-0.207, countersink: 100 degrees, 0.3748-0.3819 diameter....0.2172-0.2182, co... | 1 | |
| AFNDT-1017AL | Custom Eddy Current Hole Standard 7075-T7 Aluminum ( Equivalent substitute for 7010 Aluminum). Hole Sizes 1.77" and 0.58" diameter. EDM flaw size: 0.5mm(.020") x 0.1mm (0.004") +/- .002". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1030/10MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 10mm diameter hole. Midwall EDM notch( 9.5mm long +/- 0.95 )x ( 0.13mm deep +/- 0.01 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1030/12MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 12mm diameter hole. Midwall EDM notch( 9.5mm long +/- 0.95 )x ( 0.13mm deep +/- 0.01 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1030/6MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 6mm diameter hole. Midwall EDM notch( 9.5mm long +/- 0.95 )x ( 0.13mm deep +/- 0.01 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1030/8MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 8mm diameter hole. Midwall EDM notch( 9.5mm long +/- 0.95 )x ( 0.13mm deep +/- 0.01 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1031/10MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 10mm diameter hole. Midwall EDM notch( 1.5mm long +/- 0.15 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1031/12MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 12mm diameter hole. Midwall EDM notch( 1.5mm long +/- 0.15 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1031/6MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 6mm diameter hole. Midwall EDM notch( 1.5mm long +/- 0.15 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1031/8MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 8mm diameter hole. Midwall EDM notch( 1.5mm long +/- 0.15 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1032/10MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 10mm diameter hole. Corner EDM notch( 0.76mm long +/- 0.07 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1032/12MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 12mm diameter hole. Corner EDM notch( 0.76mm long +/- 0.07 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1032/6MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 6mm diameter hole. Corner EDM notch( 0.76mm long +/- 0.07 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1032/8MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 8mm diameter hole. Corner EDM notch( 0.76mm long +/- 0.07 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1061AL | EDDY CURRENT SURFACE BLOCK 7075-T6. 2 EDM SLOTS ( 0.2mm deep +/-0.05 & 0.12mm wide +/- 0.01),( 0.5mm deep +/- 0.01. Includes Certification Report and Certificate of Conformance. | 1 | |
| AFNDT-1061CS | EDDY CURRENT SURFACE BLOCK, 4130/4140 STEEL. 2 EDM SLOTS ( 0.2mm deep +/-0.05 & 0.12mm wide +/- 0.01),( 0.5mm deep +/- 0.01. Includes Certification Report and Certificate of Conformance. | 1 | |
| AFNDT-1074-3 | EDDY CURRENT SURFACE BLOCK MADE OF 6AL-4V TITANIUM WITH 3 SURFACE NOTCHES ACROSS THE WIDTH OF THE BLOCK. .1mm X .005" MAX WIDTH and .2mm X .005" MAX WIDTH, .5MM X.005" MAX WIDTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1080/4340 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES 0.5mm, 1.0mm, 2.0mm, 3.00mm, 4.0mm, 5.0mm (.004"W +/- .002, MAX.006), 4340 STEEL 1.0"W x 7.0"L. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2004 | EDDY CURRENT SURFACE STANDARD WITH 3 EDM NOTCHES: ( .005", .010", .020" Deep x .004"Wide +/- .002 ), MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/13-8 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002), 13-8PH STEEL. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/13-8PH | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002), 13-8PH MO STEEL. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/15-5PH | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002), 15-5PH STEEL. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/17-4 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002), 17-4PH STEEL. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/17-7PH | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002), 17-7PH STEEL. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/2014-T6 | EDDY CURRENT SURFACE REFERENCE STANDARD, EDM NOTCHES .008", .020", .040" (.004W +/- .002), MATERIAL: 2014-T6 ALUMINUM. SIZE: 4.0"L x 1.0"W x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/2024 | EDDY CURRENT SURFACE REFERENCE STANDARD, EDM NOTCHES .008", .020", .040" (.004W +/- .002), MATERIAL: 2024-T3 ALUMINUM. SIZE: 4.0"L x 1.0"W x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/2024-T6 | EDDY CURRENT SURFACE REFERENCE STANDARD, EDM NOTCHES .008", .020", .040" (.004W +/- .002), MATERIAL: 2024-T6 ALUMINUM. SIZE: 4.0"L x 1.0"W x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/300M | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002), MATERIAL: 300M STEEL. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/301 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002, MAX.006), CRES 301 1/2 HARD(MIL-S-5059) 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/304 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002), 304 STAINLESS STEEL 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/304L | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002), 304L STAINLESS STEEL. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/316SS | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002), 316 STAINLESS STEEL 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/4130 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002), 4130 STEEL. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/4340 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002), 4340 STEEL. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/6061-T6 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008"(0.2mm), .020"(0.5mm), .040"(1.0mm) (.004"W +/- .002), 6061-T6 ALUMINUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance and Material Certification. | 1 | |
| AFNDT-2030/7075-T6 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002), 7075-T6 ALUMINUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/7075-T7 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002), 7075-T7 ALUMINUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/718 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002), 718 INCONNEL. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/I600 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002), 600 SERIES INCONNEL. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/MAR | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008"(0.2mm), .020"(0.5mm), .040"(1.0mm) (.004"W +/- .002). MATERIAL: 250 MARAGING STEEL. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/TI | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002, MAX .006"), 6AL-4v TITANIUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and COC | 1 | |
| AFNDT-2030CS | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002, MAX.006), 4130 or 4340 STEEL. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030INC | EDDY CURRENT SURFACE REFERENCE BLOCK, EDM NOTCHES ( .008", .020", .040" x .004" W +/- .002"), INCONEL 718. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2038AL | EDDY CURRENT CALIBRATION BLOCK 2024-T351, WITH .020"Lx.005"W COUNTERSINK SURFACE EDM NOTCH IN EACH HOLE. HOLE SIZES: .156"Ø and .187"Ø. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2044/15-5 | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also... | 1 | |
| AFNDT-2044/304 | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also... | 1 | |
| AFNDT-2044/718 | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also co | 1 | |
| AFNDT-2044/Ti | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also... | 1 | |
| AFNDT-2044AL | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also... | 1 | |
| AFNDT-2044S | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also... | 1 | |
| AFNDT-2049/4130 | GENERAL PURPOSE EDDY CURRENT REFERENCE STANDARD, 4130, 0.030"X0.030", CORNER EDM NOTCH ON THE TOP SURFACE. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2049/4340 | GENERAL PURPOSE EDDY CURRENT REFERENCE STANDARD, 4340, 0.030"X0.030", CORNER EDM NOTCH ON THE TOP SURFACE. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2049/7075-T6 | GENERAL PURPOSE EDDY CURRENT REFERENCE STANDARD, 7075-T6, 0.030"X0.030", CORNER EDM NOTCH ON THE TOP SURFACE. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2107/4340 | EDDY CURRENT SURFACE REFERENCE STANDARD. EDM FLAWS: .008", .020", .040" (.005" Maximum Width). MATERIAL: 4340 STEEL. SIZE: 1.0"W x 4.0"L x .25"H. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2107/6AL4V | EDDY CURRENT SURFACE REFERENCE STANDARD. EDM FLAWS: .008", .020", .040" (.005" Maximum Width). MATERIAL: 6AL-4V TITANIUM. SIZE: 1.0"W x 4.0"L x .25"H. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2107/7075T6 | EDDY CURRENT SURFACE REFERENCE STANDARD. EDM FLAWS: .008", .020", .040" (.005" Maximum Width). MATERIAL: 7075-T6 ALUMINUM. SIZE: 1.0"W x 4.0"L x .25"H. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2110 | CUSTOM EDDY CURRENT TEMPLATE.2024-T3 ALUMINUM .063" THICK PLATE. (SELECTED RIVETS). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2110-.201 | CUSTOM EDDY CURRENT TEMPLATE.2024-T3 ALUMINUM .063" THICK PLATE. (.201" DIAMETER HOLE). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2110-.500D | CUSTOM EDDY CURRENT TEMPLATE.2024-T3 ALUMINUM .063" THICK PLATE. (.500" DIAMETER HOLE D SHAPE). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2110-.812 | CUSTOM EDDY CURRENT TEMPLATE.2024-T3 ALUMINUM .063" THICK PLATE. (.812" DIAMETER HOLE). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2110-.950 | CUSTOM EDDY CURRENT TEMPLATE.2024-T3 ALUMINUM .063" THICK PLATE. (.950" DIAMETER HOLE). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2110-1.06 | CUSTOM EDDY CURRENT TEMPLATE.2024-T3 ALUMINUM .063" THICK PLATE. (1.06" DIAMETER HOLE). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2114AL | EDDY CURRENT SURFACE REFERENCE STANDARD, EDM NOTCHES .008", .020", .040" (.006W +/- .001). BLOCK SIZE:3.156 "L x 1.375"W x .312"H. MATERIAL: 2024-T3 ALUMINUM.. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2120 | CUSTOM EDDY CURRENT BLOCK, 4340, 4X1X.250, EDM .2MM, .5MM, 1.0MM X .005±.002. ADD.003 NON-CONDUCTIVE SHIMS. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2151AL | EDDY CURRENT SURFACE REFERENCE STANDARD, EDM NOTCHES .008", .020", .040" (.005"W + .001"), MATERIAL: 5086 H32 ALUMINUM. (29.0% IACS. SIZE: 80mm(3.15") L +5mm(.197") x 30mm(1.18") W +5mm(.197") x 8mm(.315") THICK +3mm(.118"). Includes Mill Certifica... | 1 | |
| AFNDT-2227Ti | CUSTOM TITANIUM EDDY CURRENT MULTI HOLE STANDARD WHICH COMBINES BOEING PART NUMBERS NDT1022-NDT1027 STANDARDS INTO ONE PART..HOLE SIZES ( 0.188", 0.250", 0.313", 0.375",0.438", 0.500" ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3015 | EMBRAER 170/190 SERIES EDDY CURRENT SURFACE REFERENCE STANDARD 50-00-00 PT 1 PAGE 4, Aluminum(7075-T6) 3 EDM SLOTS (0.2mm, 0.5mm,1.0mm DEEP) x (0.05mm WIDE). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3019S | CUSTOM AIR FORCE EDDY CURRENT BOLT HOLE STANDARD PER CUSTOMER SUPPLIED DRAWING, 1/4" 8630 STEEL PLATE (4130 EQUIVALENT ALTERNATIVE). EDM: 0.030 x 0.030 CORNER NOTCH. HOLE DIAMETER= 0.437Ø. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3025AL | Eddy Current Surface Standard 7075-T6 Aluminum. Block Size: 4.0"(101.6mm)L x 1.0"(25.4mm)W x .25"(6.35mm)H. Includes 3 EDM Flaws of the following sizes...1.) (0.5mm)D x (0.25mm)W x (25mm)L..2.) (1.0mm)D x (0.25mm)W x (25mm)L..3.) (2.0mm)D x (0.25mm)W x... | 1 | |
| AFNDT-3025CS | Eddy Current Surface Standard 4340 Carbon Steel. Block Size: 4.0"(101.6mm)L x 1.0"(25.4mm)W x .25"(6.35mm)H. Includes 3 EDM Flaws of the following sizes...1.) (0.5mm)D x (0.25mm)W x (25mm)L..2.) (1.0mm)D x (0.25mm)W x (25mm)L..3.) (2.0mm)D x (0.25mm)W ... | 1 | |
| AFNDT-3025INC | Eddy Current Surface Standard 718 Inconel. Block Size: 4.0"(101.6mm)L x 1.0"(25.4mm)W x .25"(6.35mm)H. Includes 3 EDM Flaws of the following sizes...1.) (0.5mm)D x (0.25mm)W x (25mm)L..2.) (1.0mm)D x (0.25mm)W x (25mm)L..3.) (2.0mm)D x (0.25mm)W x (25m... | 1 | |
| AFNDT-3025SS | Eddy Current Surface Standard 304 Stainless Steel. Block Size: 4.0"(101.6mm)L x 1.0"(25.4mm)W x .25"(6.35mm)H. Includes 3 EDM Flaws of the following sizes...1.) (0.5mm)D x (0.25mm)W x (25mm)L..2.) (1.0mm)D x (0.25mm)W x (25mm)L..3.) (2.0mm)D x (0.25mm)... | 1 | |
| AFNDT-3025TI | Eddy Current Surface Standard 6AL-4V Titanium. Block Size: 4.0"(101.6mm)L x 1.0"(25.4mm)W x .25"(6.35mm)H. Includes 3 EDM Flaws of the following sizes...1.) (0.5mm)D x (0.25mm)W x (25mm)L..2.) (1.0mm)D x (0.25mm)W x (25mm)L..3.) (2.0mm)D x (0.25mm)W x ... | 1 | |
| AFNDT-3026AL | EDDY CURRENT SURFACE REFERENCE STANDARD Leonardo Helicopters SB No. 109EP-158. MATERIAL: 7475-T7 ALUMINUM. SIZE: 1.0" x 3.0" x .25" EDM SLOT (0.5mm DEEP) x (0.05-0.25mm WIDE) +/-.03mm. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3035SS | EDDY CURRENT SURFACE REFERENCE STANDARD. EDM NOTCHES: .005", .010", .020", .060" (.005"W +/- .002, MAX.007" WIDE). MATERIAL: 301 1/2 HARD STAINLESS STEEL(MIL-S-5059) 1.0"W x 4.0"L x .125", NOTE: .750" DISTANCE BETWEEN EACH NOTCH. Includes Test Repor... | 1 | |
| AFNDT-3036AL | CUSTOM 2 HOLE EDDY CURRENT REFERENCE STANDARD. MATERIAL: 7075-T6 ALUMINUM. HOLE SIZES: .250" and .875" WITH a .030" x .030" x .007" MAX WIDTH CORNER EDM NOTCH IN EACH HOLE. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3037 | CUSTOM EDDY CURRENT HOLE REFERENCE STANDARD. MATERIAL: 718 INCONEL. HOLE SIZE: .256"Ø WITH a 0.1" x 0..1" x .010" +/- .002" EDM NOTCH IN THE BOTTOM RADIUS OF THE HOLE. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3055 | EDDY CURRENT SURFACE REFERENCE STANDARD. Low Hydrogen Embrittlement Cadmium-Titaniium Alloy Plating per BAC5804. 3 EDM FLAWS ON BOTH SIDES. ONE SIDE UNPLATED(BARE). NOTCH DEPTHS : .010", .020", .050". NOTCH WIDTH: (.007" +/- .002"). MATERIAL: 4330 STE... | 1 | |
| AFNDT-3058/INC | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .5mm, 1.0mm, 2.0mm x (.006"Wide +/- .001). MATERIAL: 718 Inconel. SIZE: 1.0" Wide x 4.0" Long x 0.25" Thick. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3059 | Custom Eddy Current 2 Hole Calibration Standard per Customer Supplied Drawing. Material: 7050-T7451. Hole Sizes: .516"Ø and .812"Ø with a total of 4 EDM Notches 0.021" x 0.021" x .004" Wide Max. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3060 | Custom Eddy Current 2 Hole Calibration Standard per Customer Supplied Drawing. Material: 7050-T7451. Hole Sizes: .252"Ø and .516"Ø with a total of 4 EDM Notches 0.021" x 0.021" x .004" Wide Max. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3061AL | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .005", .010", .020" (.004"W +/- .002), 7075-T7 ALUMINUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3071 | Custom designed eddy current multi-layer aircraft aluminum skin test specimen, drawing 2, sheets 1-4. reference standard for Central Piedmont Community College. Material: 2024-T3 Aluminum. Includes Certification Report Traceable to NIST. | 1 | |
| AFNDT-3072 | Custom designed eddy current aircraft calibration standard, Drawing 3, Sheets 1-3, for Central Piedmont Community College. Material: 2024-T3 Aluminum. Includes Certification Report Traceable to NIST. | 1 | |
| AFNDT-3073 TYPE 1 | Custom designed eddy current reference standard for Central Piedmont Community College. Material: 2024-T3 Aluminum. Includes Certification Report Traceable to NIST. | 1 | |
| AFNDT-3073 TYPE 2 | Custom designed eddy current reference standard for Central Piedmont Community College. Material: 2024-T3 Aluminum. Includes Certification Report Traceable to NIST. | 1 | |
| AFNDT-3073 TYPE 3 | Custom designed eddy current reference standard for Central Piedmont Community College. Material: 2024-T3 Aluminum. Includes Certification Report Traceable to NIST. | 1 | |
| AFNDT-3154CS | Eddy Current Surface Standard Carbon Steel. 0.5mm, 1.0mm,2.0mm Deep x .15mm Wide +/- .05mm. Block Size: 5.0"(127mm)L x 2.0"(50.8mm)W x .25"(6.35mm). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3154SS | Eddy Current Surface Standard 316 Steel. 0.5mm, 1.0mm,2.0mm Deep x .15mm Wide +/- .05mm. Block Size: 5.0"(127mm)L x 2.0"(50.8mm)W x .25"(6.35mm). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3160AL | BOMBARDIER EDDY CURRENT SURFACE REFERENECE STANDARD. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), DEPTH TOLERANCE = +/- .001"(+/- .003mm). MATERIAL 2024-T3 ALUMINUM. SIZE: 1.5"W x 3.75"L x .25". Includes Test Report and Certificate of... | 1 | |
| AFNDT-3160AL-1 | BOMBARDIER EDDY CURRENT SURFACE REFERENECE STANDARD. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), DEPTH TOLERANCE = +/- .001"(+/- .003mm). MATERIAL 6061-T6 ALUMINUM, IACS 40.00-44.80. SIZE: 1.5"W x 3.75"L x .25". Includes Test Report and | 1 | |
| AFNDT-3160CS | BOMBARDIER EDDY CURRENT SURFACE REFERENECE STANDARD. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), DEPTH TOLERANCE = +/- .001"(+/- .003mm). MATERIAL 4130/4340 CRES STEEL. SIZE: 1.5"W x 3.75"L x .25". Includes Test Report and Certificat... | 1 | |
| AFNDT-3201/321SS | EDDY CURRENT SURFACE REFERENCE STANDARD, 321SS 3 EDM SLOTS (0.2mm, 0.5mm,1.0mm DEEP) x (0.05-0.25mm WIDE). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3224TI | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .005", .010", .020", .040", .060" (.005"W +/- .002, MAX .007"). MATERIAL: 6AL-4v TITANIUM@2.2IACS. SIZE: 1.0"W x 6.0"L x .500". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3231 | Custom McDonnell Douglas Low Frequency Eddy Current reference standard, 06-20-01 Figure 9 sheets 1-4. Material: 2024-T3 or 7075-T6 Aluminum. Fasteners: (NAS1097AD6-5 & BACB30NW6K3). Includes Test Report and Certificate of Confromance. | 1 | |
| AFNDT-3231-1 | Custom McDonnell Douglas Low Frequency Eddy Current reference standard, 06-20-01 Figure 9 sheets 1-4. Material: 2024-T3 or 7075-T6 Aluminum.Fasteners: (CR3223-5 & MS21141-5). Includes Test Report and Certificate of Confromance. | 1 | |
| AFNDT-3233F | Custom Eddy Current Surface Standard. Size: 80mm x 35mm x 7mm. Material: Forged Aluminum. EDM Notch: .060" Long x .004" Wide x .030" Deep +/- 0.002". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3279/15-5PH | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .010", .020", .050" .007" ,MAX WIDTH, 15-5PH STEEL. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3279/Ti | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .010", .020", .050" .007" ,MAX WIDTH, 6AL-4V TITANIUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3284SS | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .005"(0.127mm), .010"(0.254mm), .020"(0.508mm), .050"(1.27mm) (.004"W +/- .001), 304 STAINLESS STEEL. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. REFERENCE P/N:29A049 | 1 | |
| AFNDT-3285/17-4 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .005"(0.127mm), .010"(0.254mm), .020"(0.508mm) (.004"W +/- .002). Material: 17-4PH Steel Condition to TH1050. SIZE: 1.0"W x 3.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3285/17-7 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .005"(0.127mm), .010"(0.254mm), .020"(0.508mm) (.004"W +/- .002). Material: 17-7PH Steel Condition to TH1050. SIZE: 1.0"W x 3.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3285/304 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .005"(0.127mm), .010"(0.254mm), .020"(0.508mm) (.004"W +/- .002). Material: Non-Magnetic 304 Stainless Steel. SIZE: 1.0"W x 3.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3306/2024T3 | EDDY CURRENT SURFACE REFERENCE STANDARD, METRIC NOTCHE SIZES: 0.2mm, 0.5mm &1.0mm. WIDTH = .005" +/- .002" MATERIAL: 2024-T3 ALUMINUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3306/7075T6 | EDDY CURRENT SURFACE REFERENCE STANDARD, METRIC NOTCHE SIZES: 0.2mm, 0.5mm &1.0mm. WIDTH = .005" +/- .002" MATERIAL: 7075-T6 ALUMINUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3306/MAG | EDDY CURRENT METRIC SURFACE REFERENCE STANDARD. EDM NOTCH SIZES: 0.2mm, 0.5mm &1.0mm. WIDTH = .005" +/- .002" MATERIAL: MAGNESIUM ZK60A-T5 PER ASTM-B107. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3308AL | Eddy Current Calibration Standard 3/8” diameter hole standard. Material: 2024-T3 standard with a .030”x .030" corner notch. Includes Certification Report traceable to NIST. | 1 | |
| AFNDT-3315AL | EDDY CURRENT SURFACE REFERENCE STANDARD, 4 EDM NOTCHES .005", .010", .020" and .050" x (.004"W +/- .002). MATERIAL: 7075-T6 ALUMINUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3319SS | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .020"(0.5mm), .040"(1.0mm), .079"(2.0mm) (.005"W +/- .002), 304 STAINLESS STEEL. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3347CS | EDDY CURRENT WELD SURFACE REFERENCE STANDARD. EDM NOTCHES: 0.5mm, 1.0mm, 2.0mm (.1mm (.004") WIDE ± .05mm( .002") MAX WIDTH .152mm (.006"). MATERIAL: 4340 CARBON STEEL. SIZE: 1.0"W x 4.0"L Includeds 4 piece .020" thick shim and Key Ring set. Includes Tes | 1 | |
| AFNDT-3357/2024T4 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008"(0.2mm), .020"(0.5mm), .040"(1.0mm) (.004"W +/- .001), 2024-T4 ALUMINUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance and Material Certification. | 1 | |
| AFNDT-3370/4340 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .010"(0.25mm), .020"(0.5mm), .030"(0.76mm) (.004"W +/- .002), 4340 STEEL. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3370/7075T6 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .010"(0.25mm), .020"(0.5mm), .030"(0.76mm) (.004"W +/- .002), 7075-T6 ALUMINUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3370/TI | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .010"(0.25mm), .020"(0.5mm), .030"(.76mm) (.004"W +/- .002), 6AL-4v TITANIUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3412 | Custom Eddy Current Surface Standard with a Total of 12 EDM Notches. Notch Lenghs of .125, .250", .375" and .625". Notch Depths of .008", .020", and .040" for each length. Material: Nickel Aluminum Bronze. Includes Test Report and Certificate of Conforman | 1 | |
| AFNDT-3413 | Custom Boeing Eddy Current Hole Standard. Hole Sizes: .159 & .190"Ø. With one of each hole size plugged. Material: 2024-T3 Aluminum. Plugged holes contain a BACR15BA6A8C Rivet in the .056" plate. Apply BMS 545 sealant between each layer Includes Test Repo | 1 | |
| AFNDT-3423 | Eddy Current Reference Standard. Dimensions: 4" x 0.25" x 1" Material: Aluminum 7075-T7. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3425 | Custom Eddy Current Multi-Hole Reference Standard. Hole Diameters: 7.0 mm, 7.5 mm, 8.0 mm, 8.5 mm, 9.0 mm, 9.5 mm, 10.0 mm, 10.5mm, 11.0 mm, 11.5 mm, 12.0 mm, 12.5 mm, 13.0 mm, 13.5 mm, 14.0 mm. Two (2) EDM notches per hole.Material: Aluminium 7075-T76. | 1 | |
| AFNDT-3426 | Custom Eddy Current Hole Standard. Hole Diameters: 4.0 mm, 4.5 mm, 5.0 mm, 5.5 mm, 6.0 mm, 6.5 mm, 7.0 mm, 7.5 mm, 8.0 mm, 8.5 mm, 9.0 mm, 9.5 mm, 10.0 mm, 10.5 mm, 11.0 mm, 11.5 mm, 12.0 mm. Material: Aluminium 7050-T74. Includes Test Report and Certific | 1 | |
| AFNDT-3440/304 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .010"(0.254mm), .020"(0.508mm), .050" (1.27mm) (.004"W +/- .001). Material: Non-Magnetic 304 Stainless Steel. SIZE: 1.0"W x 3.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3440/6AL-4V | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .010"(0.254mm), .020"(0.508mm), .050" (1.27mm) (.004"W +/- .001). Material: 6AL-4V Titanium. SIZE: 1.0"W x 3.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3457 | EDDY CURRENT SURFACE REFERENCE STANDARD. Cadmium plated on one side to AMS-QQ-P-416-f Type 1, Class 2. 3 EDM FLAWS ON BOTH SIDES. ONE SIDE UNPLATED(BARE). NOTCH DEPTHS : .008", .020", .040". NOTCH WIDTH: (.004"W +/- .002). MATERIAL: 4340 STEEL. SIZE: 1. | 1 | |
| AFNDT-3459AL | Calibration standard, Aluminium alloy 2024-T3, rotary (dynamic) eddy current testing, cross-drilled hole type per BAe 146 Ref. NTM Part 6,20-00-00), for diameters of (5/16 in. (7.94 mm), 13/16 in. (20.64 mm), 7/8 in. (22.23 mm), 1.1/16 in. (26.99 mm), 1. | 1 | |
| AFNDT-3459TI | Calibration standard, 6Al-4v Titanium , rotary (dynamic) eddy current testing, cross-drilled hole type per BAe 146 Ref. NTM Part 6,20-00-00), for diameters of (5/16 in. (7.94 mm), 13/16 in. (20.64 mm), 7/8 in. (22.23 mm), 1.1/16 in. (26.99 mm), 1.1/8 in | 1 | |
| AFNDT-3460AL | Custom Eddy Current Bolt Hole Calibration Standard. Total of 35 Hole Sizes: Diameters 3.0mm, 3.2mm, 4.0mm, 4.2mm, 4.6mm, 5.0mm, 5.4mm, 5.8mm, 6.2mm, 6.6mm, 7.0mm, 7.4mm, 7.8mm, 8.0mm, 8.2mm, 8.6mm, 9.0mm, 9.4mm, 9.8mm, 10.2mm, 10.6mm, 11.0mm, 11.4mm, 11. | 1 | |
| AFNDT-ECRC82040 | Eddy Current Crack Standard Magnesium AZ-31 | 1 | |
| AFNDT-PR-T-2521/22 | CUSTOM EDDY CURRENT SURFACE CALIBRATION BLOCK. PER CUSTOMER SUPPLIED DRAWING. MATERIAL: 7075-T6 Aluminum. EDM Notch size 1mm (.040') , .76mm(.030"), .2mm(.008") deep x .1mm(.004") wide +/- .002". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-SRS-082A-1 | EDDY CURRENT SURFACE BLOCK 7075-T6 ALUMINUM. 2 EDM SLOTS ( 0.2mm deep +/-0.05mm & 0.12mm wide +/- 0.01mm). EDM NOTCH#1 ( 0.5mm deep +0.06/-0.04 & 0.12 wide +0.01/-0.02 ), and EDM NOTCH #2 ( 1.0mm deep +0.06mm/-0.04mm & 0.12mm wide +0.01mm/-0.02mm). Inc... | 1 | |
| AFNDT-SRS-082S-1 | EDDY CURRENT SURFACE BLOCK 4130 STEEL. 2 EDM SLOTS ( 0.2mm deep +/-0.05mm & 0.12mm wide +/- 0.01mm). EDM NOTCH#1 ( 0.5mm deep +0.06/-0.04 & 0.12 wide +0.01/-0.02 ), and EDM NOTCH #2 ( 1.0mm deep +0.06mm/-0.04mm & 0.12mm wide +0.01mm/-0.02mm). Includes ... | 1 | |
| AGE-02001-401 | REFERENCE STANDARD, GENERAL EDDY CURRENT TESTING, ALUMINUM ALLOY | 1 | |
| AGE-04362-401 | SET- REFERENCE STAN- DARD, NDI EDDY CURRENT | 1 | |
| AGE-04383-001 | STANDARDS SET - REFERENCE, NDI – GENERAL EDDY CURRENT TEST | 1 | |
| AGE-04707-401 | SET - REFERENCE STANDARD NDI - GENERALEDDY CURRENT TEST | 2 | |
| AGE-04900-401 | EDDY CURRENT INSTRUMENT - IMPEDANCEPLANE DISPLAY OR SIMILAR REFERENCE STANDARD, NDI, ALUMINUM7050-T7451 | 4 | |
| AGE70046 | LOAD COMPRESSOR-EDDY CURRENT MASTER | 1 | |
| AGE70047 | GENERATOR COMPRESSOR-EDDY CURRENT | 1 | |
| AGE70048 | 1ST STAGE TURBINE DISK-EDDY CURRENT | 1 | |
| AGE70049 | 2ND STAGE TURBINE DISK-EDDY CURRENT | 1 | |
| AGE70201 | Eddy Current Master - 2nd Stage Disk | 1 | |
| AGE70202 | Eddy Current Master - 1st Stage Disk | 1 | |
| AGE70203 | Eddy Current Master - Impeller | 1 | |
| AL29-32 | EDDY CURRENT HFEC CALIBRATION TEST BLOCK | 6 | |
| AL35-45 | EDDY CURRENT HFEC CALIBRATION TEST BLOCK | 8 | |
| ALL12-M02-015A | EDDY CURRENT CABLE | 1 | |
| ANA-BL4 9C1579G01 | EDDY CURRENT PROBE LEADS | 1 | |
| ANDT1015 | EDDY CURRENT REFERENCE STANDARD | 3 | |
| APN-95-2C/1M | Eddy Current Surface Probe 90° degrees, 0.500 inch (12.70 mm) drop curve, 2.0 inch (152 mm)long,1MHz-2MHZ supplied with a Microdot Connector. Includes Test Report and Certificate of Conformance. | 1 | |
| APN-95-6/2MHZ | EDDY CURRENT PROBE | 1 | |
| APN-95-6C/1M | Eddy Current Surface Probe 90° degrees, 0.500 inch (12.70 mm) drop curve, 6.0 inch (152 mm)long, 500kHz-2MHZ with Microdot Connector. Includes Test Report and Certificate of Conformance. | 1 | |
| APN-95-6C/200K | Eddy Current Surface Probe 90° degrees, 0.500 inch (12.70 mm) drop curve, 6.0 inch (152 mm)long, 100-500 kHz with a center frequency of 200KHz. Supplied with a 7 Pin Lemo Connector. Includes Test Report and Certificate of Conformance | 1 | |
| ARS-123/TI | EDDY CURRENT SURFACE REFERENCE STANDARD. MATERIAL: TI-6AL-6V-2SN. SIZE: 2.0" LONG x 1.0" WIDE. EDM NOTCH .040" DEEP +/- .002" x .005" WIDE +/- .001". Includes Test Report and Certificate of Conformance. | 1 | |
| ASP01500 | PROBE BY EDDY CURRENT | 1 | |
| ATPN-125-6C | EDDY CURRENT PROBE | 1 | |
| ATPN-65-6C | EDDY CURRENT PROBE | 1 | |
| ATPN-903-5.5B/1.0 | EDDY CURRENT PROBE | 1 | |
| ATPN-95-6 | EDDY CURRENT PROBE OLYMPUS P/100KHZ-500KHZ/A/905/6 | 1 | |
| ATPN-95-6C | EDDY CURRENT PROBE | 1 | |
| ATPRQ-95-5B/1K-50K | EDDY CURRENT PROBE | 1 | |
| AUR-.187SE | PROBE FOR EQUIPMENT DETECTING CRACKS BY EDDY CURRENT, FOR AIRCRAFT REPAIR PROCESS. | 1 | |
| AURFB-4.8M/SS | EDDY CURRENT PROBE 4,8mm | 1 | |
| AURFB-5.1M/SS | EDDY CURRENT PROBE 5,1mm | 1 | |
| AURFB-5.4M/SS | EDDY CURRENT PROBE 5,4mm | 1 | |
| AURFX-.186/100MWL | EDDY CURRENT FLEX SHAFT PROBE-.186SS | 1 | |
| AURFX-.187/100MWL | EDDY CURRENT FLEX SHAFT PROBE-.187SS | 1 | |
| AURFX-.469/100MWL | EDDY CURRENT FLEX SHAFT PROBE-.469SS | 1 | |
| AURFX-.500/100MWL | EDDY CURRENT FLEX SHAFT PROBE-.500SS | 1 | |
| AXXTPN-91-4B/500K-1MH???? | PROBE EDDY CURRENT | 1 | |
| AZTBL-.060-6 | EDDY CURRENT BLADE PROBE, UNSHIELDED .060 THICK, 6.0" LONG, STRAIGHT SHAFT, 50-500KHz, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| B1 | EDDY CURRENT EQUIPMENT ELOTEST | 6 | |
| B1 BSM | NDT Eddy Current Tester | 1 | |
| B1-V4UM-KIT | TEST SET EDDY CURRENT | 1 | |
| B1V4UM | EDDY CURRENT TEST SET | 1 | |
| B2 | ELOTEST, B1, SD OR SDM,(EDDY CURRENT EQUIPMENT) | 6 | |
| B300 | EDDY CURRENT EQUIPMENT ELOTEST | 1 | |
| B300ECE | B300 EDDY CURRENT EQUIPMENT - ELOTEST | 1 | |
| B310 | EDDY CURRENT TEST SET | 1 | |
| B588 | EDDY CURRENT EQUIPMENT | 1 | |
| BAEREF000025048 | Equipment - Eddy current crack detection | 1 | |
| BH7475 – T7351 | EDDY CURRENT ROTO CALIBRATION TEST BLOCK | 4 | |
| BHCB-AL | EDDY CURRENT STANDARD | 1 | |
| BHCB-AL1 | EDDY CURRENT STANDARD | 1 | |
| BL445-6-1 | EDDY CURRENT - SURFACE PROBE | 1 | |
| BLD-001 | EDDY CURRENT BLADE PROBE, .060 THICK, 6.0" LONG, STRAIGHT SHAFT, 50-500KHz, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| BPMD-10-TF | BOLT HOLE EDDY CURRENT PROBE | 1 | |
| BPMD-12-TF | BOLT HOLE EDDY CURRENT PROBE | 1 | |
| BPMD-8-TF | BOLT HOLE EDDY CURRENT PROBE | 1 | |
| BXM-32/40 | EDDY CURRENT PROBE WITH SHIELDED SCREW HOLE 17/32 INCH DIAMETER | 1 | |
| BXMF-27/31M | Eddy current probe | 1 | |
| BYMH-16/20 | EDDY CURRENT PROBE | 1 | |
| BYMH3/16 | EDDY CURRENT PROBE | 1 | |
| BYU-12/16 | EDDY CURRENT PROBE | 1 | |
| BYU-16/20 | EDDY CURRENT PROBE | 1 | |
| C-130-WRK | C-130 EDDY CURRENT PROBE KIT | 1 | |
| CFM56 9970-958-579 | EDDY CURRENT SURFACE REFERENCE BLOCK. 2 EDM NOTCHES .012" Deep x .004" Wide and .020" Deep x .004" Wide. Tolerance on Width (.004" W +/- .002"), Material: Inconel 600 Series. Reference: CFM56-5B S/B 72-0620 PAGE 14. Includes Test Report and Certificate | 2 | |
| CFM56-56B | TRF EDDYCURRENT KIT | 1 | |
| CM-ET-KISIG001A | EDDY CURRENT CONDUCTIVITY METER | 1 | |
| CM-ET-KISIG001A-8 | EDDY CURRENT CONDUCTIVITY METER | 1 | |
| COUPON 12 | PEMCO WORLD AIR SERVICES EDDY CURRENT LOW FREQUENCY STANDARD. COUPON FOR USE WITH INSPECTION ED-3. 05-30-10 PG.193. Includes Certification Report Tracable to NIST. | 1 | |
| COUPON 2 | PEMCO WORLD AIR SERVICES EDDY CURRENT LOW FREQUENCY STANDARD. COUPON FOR USE WITH INSPECTION ED-4. 05-30-10 PG.190. Includes Certification Report Tracable to NIST. | 1 | |
| COUPON 25 | PEMCO LOW FREQUENCY EDDY CURRENT STANDARD FOR INSPECTION UJ-1. 05-30-10 PAGE 194. EDM NOTCH: .030 MAX WIDTH x .240" LONG. Includes Certification Report Tracable to NIST. | 1 | |
| COUPON 29 | PEMCO WORLD AIR SERVICES EDDY CURRENT LOW FREQUENCY STANDARD. COUPON FOR USE WITH INSPECTION ED-3 and ED-4. 05-30-10 PG.195. Includes Certification Report Tracable to NIST. | 1 | |
| COUPON 3 | PEMCO WORLD AIR SERVICES EDDY CURRENT LOW FREQUENCY STANDARD. COUPON FOR USE WITH INSPECTION ED-3. 05-30-10 PG.191. Includes Certification Report Tracable to NIST. | 1 | |
| COUPON 31 | PEMCO WORLD AIR SERVICES EDDY CURRENT LOW FREQUENCY STANDARD. COUPON FOR USE WITH INSPECTION ED-5. 05-30-10 PG.196. Includes Certification Report Tracable to NIST. | 1 | |
| COUPON 6 | PEMCO WORLD AIR SERVICES EDDY CURRENT LOW FREQUENCY STANDARD. COUPON FOR USE WITH INSPECTION ED-5. 05-30-10 PG.192. Includes Certification Report Tracable to NIST. | 1 | |
| CRES 17-4PH | BOMBARDIER CHALLENGER EDDY CURRENT SURFACE BLOCK CRES 17-4PH STEEL. PART6 78-30-06 PAGE 27, 0.008", 0.020" and 0.040" EDM NOTCHES. Includes Certification Report Tracable to NIST. | 2 | |
| CSM-100-10 | EDDY CURRENT PROBE | 1 | |
| CSM-100-10(0.156INCHDIAMETER) | EDDY CURRENT PROBE | 1 | |
| CSM-100-12 | EDDY CURRENT PROBE | 1 | |
| CSM-100-12(0,187INCHDIAMETER) | EDDY CURRENT PROBE | 1 | |
| CSM-100-14 | EDDY CURRENT PROBE | 1 | |
| CSM-100-14(0.218INCHDIAMETER) | EDDY CURRENT PROBE | 1 | |
| CSM-100-16 | EDDY CURRENT PROBE | 1 | |
| CSM-100-16(0.250INCHDIAMETER) | EDDY CURRENT PROBE | 1 | |
| CSU-100-16-40WL | EDDY CURRENT COUNTERSINK PROBE | 1 | |
| CSU-100-40MM-SS | EDDY CURRENT COUNTERSINK PROBE | 1 | |
| CSU-100-43M-SS | EDDY CURRENT COUNTERSINK PROBE | 1 | |
| CSU100-12 | Eddy current probe, bolt hole | 1 | |
| DAC ETOH-AL-1/2 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 1/2 (0.500) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-1/4 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 1/4 (0.250) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-1/8 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 1/8 (0.125) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-11/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 11/16 (0.6875) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-3/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 3/16 (0.1875) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-3/4 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 3/4 (0.750) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-3/8 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 3/8 (0.375) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-5/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 5/16 (0.3125) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-5/8 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 5/8 (0.625) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-7/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 7/16 (0.4375) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-9/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 9/16 (0.5625) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-1/2 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 1/2 (0.500) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-1/4 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 1/4 (0.250) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-1/8 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 1/8 (0.125) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-11/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 11/16 (0.6875) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-3/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 3/16 (0.1875) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-3/4 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 3/4 (0.750) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-3/8 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 3/8 (0.375) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-5/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 5/16 (0.3125) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-5/8 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 5/8 (0.625) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-7/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 7/16 (0.4375) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-9/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 9/16 (0.5625) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-1/2 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 1/2 (0.500) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-1/4 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 1/4 (0.250) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-1/8 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 1/8 (0.125) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-11/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 11/16 (0.6875) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-3/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 3/16 (0.1875) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-3/4 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 3/4 (0.750) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-3/8 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 3/8 (0.375) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-5/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 5/16 (0.3125) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-5/8 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 5/8 (0.625) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-7/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 7/16 (0.4375) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-9/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 9/16 (0.5625) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DEFECTOSCOP S 2830 | EDDY CURRENT EQUIPMENT | 1 | |
| DEFECTOSCOP S 2831 | EDDY CURRENT INSTRUMENT | 1 | |
| EC SHIM SET | 9 PIECE EDDY CURRENT SHIM THICKNESS SET. COLOR COATED THICKNESS RANGE FROM .0005"-.010 | 1 | |
| EC-AF-NRK-Case | CASE FOR EDDY CURRENT STANDARD TOOL | 1 | |
| ECM2.837 | TESTER, EDDY CURRENT | 1 | |
| ECM2.841 | TESTER - EDDY CURRENT | 1 | |
| ED-100 | Impedance Plane Flaw Detector / Eddy Current Tester | 1 | |
| ED-1100 | INSTRUMENT - EDDY CURRENT | 1 | |
| ED-520 | EDDY CURRENT UNIT | 1 | |
| ED-520ME | TESTER - EDDY CURRENT | 2 | |
| ED-530 | TESTER - EDDY CURRENT | 1 | |
| ED-TB-AL | EDDY CURRENT STANDARD | 1 | |
| ED-TB-CS | EDDY CURRENT STANDARD | 1 | |
| ED-TB-NVAL | EDDY CURRENT BLOCK | 1 | |
| ED-TB-TI | EDDY CURRENT STANDARD | 1 | |
| ED520 | EDDY CURRENT TESTER | 1 | |
| EL0TEST-M2 | EDDY CURRENT TESTER 10 HZ-12MHZ | 3 | |
| ELO TEST B1.3 SDM VERSION 2.04 | EDDY CURRENT METHOD INSPECTION TESTER | 1 | |
| ELOSTEST M2 | ：EDDY CURRENT | 1 | |
| ELOTEST B1 | NDT Eddy Current Tester - Elotest B1 | 1 | |
| ELOTEST B1V4 | TEST INSTRUMENT - EDDY CURRENT | 1 | |
| ELOTEST B310 | PORTABLE UNIVERSAL EDDY CURRENT TEST SET | 1 | |
| ELOTEST M2 | Eddy current instrument | 3 | |
| ELOTEST M2 V3 | EDDY CURRENT TEST | 3 | |
| ELOTEST M3-D | EDDY CURRENT EQUIPMENT ELOTEST | 2 | |
| ELOTEST M3-D-16 | ROHMANN M6 EDDY CURRENT DEVICE | 1 | |
| ELOTEST M3-S | ELOTEST EDDY CURRENT EQUIPMENT (TESTER) | 1 | |
| ELOTEST-B310 | Portable Universal Eddy Current Test Set | 1 | |
| ELOTEST-M2V3 | EDDY CURRENT EQUIP | 3 | |
| ELOTEST-M2V3-D | INSTRUMENT FOR DETECTION AND ANALYSIS OF EDDY CURRENTS IN ELECTRICAL CIRCUITS | 1 | |
| ELOTEST-M3-D | ELOTEST EDDY CURRENT EQUIPMENT (TESTER) | 2 | |
| ELOTEST-M3D | TEST INSTRUMENT - EDDY CURRENT | 2 | |
| ELOTESTB1-V4 | eddy current test set | 1 | |
| ELOTESTM2-V3 | eddy current test instrument | 3 | |
| ELOTESTM2V3 | EDDY CURRENT TESTER | 3 | |
| ELOTESTM3 | EDDY CURRENT EQUIPMENT ELOTEST M3 | 1 | |
| ELOWHEEL-1000 | TESTING SYSTEM,EDDY CURRENT INSPECTION | 1 | |
| ELT TEMPLATE-1 | EDDY CURRENT CIRCLE TEMPLATE, 0.750"Ø. 3 HOLE SIZES: .749", .750",.751". MATERIAL: 2024-T351, 0.063" | 1 | |
| ELT TEMPLATE-2 | EDDY CURRENT CIRCLE TEMPLATE, 0.201"Ø. 3 HOLE SIZES: .200", .201",.202". MATERIAL: 2024-T351, 0.063" | 1 | |
| ELT TEMPLATE-3 | EDDY CURRENT CIRCLE TEMPLATE, SELECT RIVET SIZES. 12 HOLE SIZES: .125", .156",.187", .218", .250", .281", .312", .343", .375", .437", .500", .562". MATERIAL: 2024-T351, 0.063" | 1 | |
| ETD2015-145-108529 | CUSTOM EDDY CURRENT STANDARD, 2024-T351 ALUMINUM .063"/.050". MS20426AD5 CSK RIVET 2 PLACES | 1 | |
| ETHER WELDCHECK EDDY CURRENT PORTABLE FLAW DETECTOR | ETHER WELDCHECK EDDY CURRENT PORTABLE FLAW DETECTOR - EDDY CURRENT FLAW DETECTOR, LIGHTWEIGHT | 1 | |
| ETher WeldCheck Eddy Current Portable Flaw Detector | ETher WeldCheck Eddy Current Portable Flaw Detector - Eddy current flaw detector, Lightweight & compact, suitable for rope access applications, Compatible with a range of probes | 1 | |
| F27539000-1 | Eddy current sensor for hubcap hole inspection | 1 | |
| F27683000-2 | Eddy current sensor for hubcap hole inspection | 1 | |
| F60.0101 | EDDY CURRENT EQUIPMENT ELOTEST | 1 | |
| F60.0110 | EDDY CURRENT TEST INSTRUMENT | 1 | |
| FC-2001 | EDDY CURRENT TESTER | 1 | |
| FD-100 | EDDY CURRENT FLAW DETECTION | 1 | |
| FPFS-3 | FE PROBE - EDDY CURRENT-500 HZ-250 KHZ | 1 | |
| G601R572101-1 | CALIBRATION STANDARD - EDDY CURRENT INSPECTION (4777 CYCLES) | 1 | |
| G601R572101−1 | Calibration Standard − Eddy Current Inspection (4777 cycles) | 1 | |
| GE Hocking Locator 3 | GE Hocking Locator 3 - Eddy current flaw detector, Conductivity and Coating Thickness modes, Long battery life (up to 8 hours), Compatible with a range of probes | 1 | |
| GE-CFMI-360 | EDDY CURRENT INSPECTION KIT | 1 | |
| GE-CFMI-430 | EDDY CURRENT INSPECTION | 1 | |
| GE-CFMI-430 ECI | EDDY CURRENT INSPECTION KIT | 1 | |
| GE-FOAP-757 | EDDY CURRENT KIT(EZEDDY SYSTEM 1 | 1 | |
| GE-FQAP 629 | EDDY CURRENT INSPECTION KIT | 1 | |
| GE-FQAP 636 | EDDY CURRENT INSPECTION KIT | 1 | |
| GE-FQAP-187 | EDDY CURRENT INSP KIT | 1 | |
| GE-FQAP-302 | HIGH SPEED EDDY CURRENT FIXTURE AND PROBE ADAPTER FOR ROHMANN HIGH SPEED ROTOR (HF AND STD. MODELS) | 2 | |
| GE-FQAP-302A | HIGH SPEED EDDY CURRENT FIXTURE AND PROBE ADAPTER FOR STAVELEY HIGH SPEED ROTOR (RA 19 MODEL) | 1 | |
| GE-FQAP-302B | HIGH SPEED EDDY CURRENT FIXTURE FOR HOCKING HIGH SPEED ROTOR (MODEL 33A022 AND 33A106) NORTEC SPITFIRE 2000 ROTATOR P/N 9020206.00 | 1 | |
| GE-FQAP-302C | HIGH SPEED EDDY CURRENT FIXTURE FOR THE FORSTER HIGH SPEED ROTOR (MODEL 2.877.01-1002 AND 2.877.02-1002) | 1 | |
| GE-FQAP-302D | HIGH SPEED EDDY CURRENT FIXTURE FOR THE NORTEC SPITFIRE 2000 ROTATOR P/N 9020206.00 ONLY | 1 | |
| GE-FQAP-302E | HIGH SPEED EDDY CURRENT FIXTURE FOR THE UNIWEST ROTATOR (MODEL JF-15) | 1 | |
| GE-FQAP-334 | EDDY CURRENT INSPECTION KIT | 1 | |
| GE-FQAP-334A | HIGH SPEED EDDY CURRENT INSPECTION KIT | 1 | |
| GE-FQAP-369 | CF6-80C/80E STAGE 3 BLADE PIECE PART EDDY CURRENT | 1 | |
| GE-FQAP-430R | "EDDY CURRENT KIT(MOTOMAN SYSTEM) 1 " | 1 | |
| GE-FQAP-524 | CF6-80A/80C STG 1 HPT DISK DOVETAIL SLOT BOTTOM AFT CORNER CHAMFER EDDY CURRENT INSPECTION | 1 | |
| GE-FQAP-584 | EDDY CURRENT INSPECTION KIT | 1 | |
| GE-FQAP-584-L | EDDY CURRENT INSPECTION KIT | 1 | |
| GE-FQAP-587 | EDDY CURRENT INSPECTION KIT | 1 | |
| GE-FQAP-629 | EDDY CURRENT INSPECTION KIT | 1 | |
| GE-FQAP-636 | EDDY CURRENT INSPECTION KIT | 1 | |
| GE-FQAP-675 | EDDY CURRENT INSPECTION KIT | 1 | |
| GE-FQAP-757 | EDDY CURRENT KIT (EZEDDY SYSTEM) | 1 | |
| GE-FQAP-783 | EDDY CURRENT KIT | 1 | |
| GSB2000019 | EDDY CURRENT, VIDEO & STRIP CHART, INSPECTION INSTRUMENT | 1 | |
| GSB5100001 | EDDY CURRENT KIT | 1 | |
| GSE 539 | GSE 539 STANDARDS SET - REFERENCE, NDI - GENERAL EDDY CURRENT TES | 1 | |
| GSE206 | EDDY CURRENT SURFACER | 1 | |
| GSE449 | EDDY CURRENT SURFACER | 1 | |
| GSE450 | EDDY CURRENT SURFACER | 1 | |
| H-2835 | DEFECTOMTER, EDDY CURRENT EQUIPMENT | 6 | |
| H2-835 | DEFECTOMTER, EDDY CURRENT EQUIPMENT | 6 | |
| H2-836 | EDDY CURRENT EQUIPMENT DEFECTOMETER | 1 | |
| HALECEDDYCURRENTTEST | HALEC EDDY CURRENT TESTER | 1 | |
| HEC-101 | EDDY CURRENT ELECTRICAL CONDUCTIVITY TESTER | 1 | |
| HOCKING | EDDY CURRENT INSTRUMENT - IMPEDANCE | 1 | |
| HOCKING 206P8 | EDDY CURRENT INSTRUMENT (NDT) | 1 | |
| HOCKING 29A028 | REFERENCE GAUGE FOR EDDY-CURRENT INSPECTION | 1 | |
| HOCKING 29A029 | REFERENCE GAUGE FOR EDDY-CURRENT INSPECTION ON ALUMINUM ALLOY | 1 | |
| HOCKING 29A032 | REFERENCE GAUGE FOR EDDY-CURRENT INSPECTION ON TITANIUM ALLOY | 1 | |
| HOCKING 29A120 | REFERENCE GAUGE FOR EDDY-CURRENT INSPECTION ON MAGNESIUM | 1 | |
| HOCKING LOCATOR 2 | EDDY-CURRENT INSTRUMENT | 1 | |
| HOCKING PHASEC 2 | EDDY-CURRENT INSTRUMENT | 1 | |
| HOCKING PHASEC 2200 | EDDY-CURRENT INSTRUMENT | 1 | |
| HOCKING PHASEC 2D | EDDY CURRENT INSTRUMENT – IMPEDANCE PLANE DISPLAY OR SIMILAR (NDT) | 1 | |
| HOCKING PHASEC 2S | EDDY-CURRENT INSTRUMENT | 1 | |
| HOCKING PHASEC 3D | EDDY CURRENT INSTRUMENT - IMPEDANCE PLANE DISPLAY | 1 | |
| HU80978 | EDDY CURRENT INSPECTION | 1 | |
| HU80979 | EDDY CURRENT TEST PEICE | 1 | |
| HU82026 | EDDY CURRENT INSPECTION | 1 | |
| HU82106 | BLADE EDDY CURRENT INSPECTION KIT | 1 | |
| HY80979 | EDDY CURRENT TEST PIECE | 1 | |
| Hocking Phasec 2200 | Eddy Current Instrument − Impedance−Plane Type | 1 | |
| Honeywell ET Standard | Honeywell Eddy Current Wheel Surface Standard. Material:2024-T6 Forged Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| IAE2R19425 | PROBE EDDY CURRENT INSPECTION | 2 | |
| IAE2R19426 | BLOCK EDDY CURRENT INSPECTION | 2 | |
| IAE2R19426 CLB | BLOCK EDDY CURRENT INSPECTION | 1 | |
| IAE2R19427 | EDDY CURRENT INSPECTION KIT | 5 | |
| IAE2RI9427 A | EDDY CURRENT INSPECTION EQUIPMENT | 1 | |
| IAER001 | EDDY CURRENT TEST EQUIPMENT | 1 | |
| IAER002 | FLOW DETECTOR, EDDY CURRENT | 1 | |
| IETH001 | EDDY CURRENT FLAW DETECTOR & BOND TESTER | 1 | |
| IRP0125 | PARTS KIT, REFERENCE - BOLT HOLES, EDDY CURRENT (NDI) | 1 | |
| K1AER002 | ETHER NDE KIT, AEROCHECK+, EDDY CURRENT PORTABLE FLAW DETECTOR | 1 | |
| KAS-3 H-132.09.3 | EDDY CURRENT PROBE | 1 | |
| KAS-3 H-132.24.1 | PROBE, EDDY CURRENT | 1 | |
| KAS-3 H-132.33.1 | PROBE, EDDY CURRENT | 1 | |
| KAS-3 H-65.02.1 | PROBE, EDDY CURRENT | 1 | |
| KAS-3 H-65.08.1 | PROBE, EDDY CURRENT | 1 | |
| KAS-3 H-66.02.01 | PROBE, EDDY CURRENT | 1 | |
| KAS3 H-132.12.1 | PROBE, EDDY CURRENT | 1 | |
| KAS34H132-44-1 | EDDY CURRENT PROBE | 1 | |
| KAS42-5E | EDDY CURRENT PROBE | 3 | |
| KDB7H1658-03-1 | PROBE-EDDY CURRENT LOW FREQUENCY | 1 | |
| KISIG001B-NIST | EDDY CURRENT TESTER KIT | 1 | |
| KIVAN001 | Kit, Vantage Eddy Current Flaw Detector | 1 | |
| KIVEE001-H | AUTOMATIC EDDY CURRENT MACHINE | 1 | |
| KIWEL300TW | KIT, WELDCHECK3, WITH THUMBWHEEL, EDDY CURRENT PORTABLE FLAW DETECTOR | 1 | |
| LP903-50B/TF | Eddy current probe 2-20kHz | 1 | |
| LP905-50B/TF/30-50KHZ | Eddy current probe | 1 | |
| LPEN95-6/100-500K | EDDY CURRENT PROBE 100KH-500KH | 1 | |
| LR056-1/TF | PROBE EDDY CURRENT | 1 | |
| LR204-1/TF | PROBE EDDY CURRENT | 1 | |
| LS013-5/TF | PROBE EDDY CURRENT | 1 | |
| LTCT7350 | Probe, Eddy Current | 1 | |
| M1-837 | EDDY CURRENT DEFECTOMETER | 1 | |
| M1.837 | EDDY CURRENT DEFECTOMETER | 1 | |
| M2 | EDDY CURRENT EQUIPMENT ELOTEST | 4 | |
| M2V3-D | EDDY CURRENT EQUIPMENT ELOTEST | 1 | |
| M3 | EDDY CURRENT EQUIPMENT ELOTEST | 4 | |
| M3-D-16 | PORTABLE EDDY CURRENT TEST | 1 | |
| MC1F.250 | EDDY CURRENT PROBE | 1 | |
| MENTOR-EM-00001 | INSTRUMENT FOR DETECTION AND ANALYSIS OF EDDY CURRENTS IN ELECTRICAL CIRCUITS | 1 | |
| MENTOREM | Mentor EM-Eddy Current Flaw Detector | 1 | |
| MIZ-10B | EDDY CURRENT TESTER | 1 | |
| MIZ-20A | Eddy current tester | 2 | |
| MIZ-21A | EDDY CURRENT TESTER | 2 | |
| MIZ-21B | EDDY CURRENT TESTER | 2 | |
| MIZ-21C | EDDY CURRENT TESTER | 1 | |
| MIZ-21SR | EDDY CURRENT BOND TESTER | 1 | |
| MIZ-22 | Eddy Current Tester | 1 | |
| MIZ10 | EDDY CURRENT FLAW DETECTOR | 1 | |
| MIZ10B | TESTER - EDDY CURRENT (COM-1564) | 1 | |
| MIZ21C | EDDY CURRENT TESTER WITH CHARGER | 1 | |
| MK2 | EDDY CURRENT EQUIPMENT MODEL HALEC | 1 | |
| MMP-305-40/F-16SS | PROBE,EDDY CURRENT | 1 | |
| MMP305-40 / F-16SS | PROBE,EDDY CURRENT | 1 | |
| MMP305-40-F-16SS | PROBE,EDDY CURRENT | 1 | |
| MMP305-40/F-16SS | PROBE,EDDY CURRENT NSN:6635015074486 | 1 | |
| MMP902-45 | PROBE,EDDY CURRENT | 1 | |
| MMP905-60 | PROBE,EDDY CURRENT | 1 | |
| MMTF-40/1-6M | EDDY CURRENT PROBE MICROTIP FISHER STRAIGHT 1 MHZ TO 6 MHZ | 1 | |
| MMTF455-60 | PROBE,EDDY CURRENT | 3 | |
| MP-40 | EDDY CURRENT PROBE SURFACE | 1 | |
| MP-50 | PROBE,EDDY CURRENT | 1 | |
| MP.045-60BL | PROBE,EDDY CURRENT - 6635-01-608-0010 | 1 | |
| MP.060-60BL | PROBE,EDDY CURRENT - 6635-01-628-5390 | 1 | |
| MP45-045-60BL | EDDY CURRENT - SURFACE PROBE | 1 | |
| MP455-45 | 1-3 MHZ EDDY CURRENT PROBE | 1 | |
| MP902-40 | EDDY CURRENT PROBE | 1 | |
| MP905-60-1-3M | EDDY CURRENT PROBE | 1 | |
| MP905-60FX | PROBE, EDDY CURRENT : 6 IN. NOM O/A LG | 1 | |
| MP905-70 | PROBE, EDDY CURRENT | 1 | |
| MPEN93-4.5B15/2M | EDDY CURRENT PROBE, 2MHZ, SHIELDED, CRANKED | 1 | |
| MPEN975-4.5B15/2M | EDDY CURRENT PROBE | 1 | |
| MPX-40 | PROBE EDDY CURRENT | 1 | |
| MT901-100FX | EDDY CURRENT PROBE | 1 | |
| MTF-40/50-500 KHZ | EDDY CURRENT PROBE | 1 | |
| MTF-40/50-500KHZ | EDDY CURRENT PROBE | 1 | |
| MTF-40FX/50-500KHZ | EDDY CURRENT PROBE | 1 | |
| MTF453-50/200K-1M | EDDY CURRENT PROBE 200KHZ - 1MHZ - 45 DEG., FISHER | 1 | |
| MTF902-60 | PROBE,EDDY CURRENT | 1 | |
| MTF905-60B | EDDY CURRENT PENCIL PROBE | 1 | |
| N0RTEC2000S | EDDY CURRENT FLAW DETECTOR | 1 | |
| N0RTEC500D | EDDY CURRENT DETECTOR | 1 | |
| N0RTEC500S | EDDY CURRENT INSTRUMENT | 1 | |
| N16-M6/50-500K | 16-PIN LEMO TO MICRODOT (EDDY CURRENT CABLE) | 1 | |
| N16-T6-R | WIRE FOR EDDY CURRENT PROBE | 3 | |
| N500D-C-E-E | Eddy Current Tool Nortec 500D | 1 | |
| N600-UEE | NORTEC 600 EDDY CURRENT FLAW DETECTOR | 1 | |
| N600C | NORTEC 600 EDDY CURRENT UNIT (CONDUCTIVITY) | 1 | |
| N600D | EDDY CURRENT FLAW DETECTOR | 2 | |
| N600D-EEE | EDDY CURRENT FLOW DETECTOR | 1 | |
| N600D-KIT-KE | NORTEC EDDY CURRENT FLAW DETECTOR | 2 | |
| N600D-PEE | NORTEC 600 EDDY CURRENT FLAW DETECTOR | 1 | |
| N600D-UEE | Nortec 600 Eddy Current Flaw Detector | 2 | |
| N600D-UIS | NORTEC 600 EDDY CURRENT | 1 | |
| N600S-BIB | INSTRUMENT FOR DETECTION AND ANALYSIS OF EDDY CURRENTS IN ELECTRICAL CIRCUITS | 1 | |
| N600S-UEE | EDDY CURRENT FLOW DETECTOR | 1 | |
| NDT 7014 | EDDYCURRENT CALIBRATION STANDARD | 2 | |
| NDT 745 | EDDYCURRENT CALIBRATION STANDARD | 2 | |
| NDT 786A | EDDYCURRENT CALIBRATION STANDARD | 2 | |
| NDT-1041 | Eddy current standard | 2 | |
| NDT-1042 | Eddy current standard | 2 | |
| NDT-1043 | Eddy current standard | 2 | |
| NDT-19 | EDDY CURRENT FLAW DETECTOR | 1 | |
| NDT-3014B | Eddy current standard set | 1 | |
| NDT1084-0,125 | EDDY CURRENT REFERENCE STANDARD | 1 | |
| NDT1084-0,156 | EDDY CURRENT REFERENCE STANDARD | 1 | |
| NDT1087-8 | LFEC EDDY CURRENT CALIBRATION BLOCK | 2 | |
| NDT18 | EDDY CURRENT EQUIPMENT NORTEC | 1 | |
| NDT2000S | EDDY CURRENT FLAW DETECTOR | 1 | |
| NDT520 | Eddy Current Inspection Reference standard 757 | 1 | |
| NEC-1006 | Eddy Current Probe | 2 | |
| NEC-1062 | Special Purpose Eddy Current Probe | 1 | |
| NEC-1079 | EDDY CURRENT PROBE | 1 | |
| NEC-1084 | EDDY CURRENT PROBE 2-200KHZ | 1 | |
| NEC-1108 | Eddy current probe | 1 | |
| NEC-2027 | Eddy Current Probe | 1 | |
| NEC-2111/TF | NDT EDDY CURRENT PROBE WITH AN OPERATING FREQUENCY | 1 | |
| NEC-3129 48/56 | EDDY CURRENT PROBE | 1 | |
| NEC-3129 56/64 | EDDY CURRENT PROBE | 1 | |
| NEC-3129 EXT | EXTENSION FOR EDDY CURRENT PROBE | 1 | |
| NEC-4039 | EDDY CURRENT PROBE | 2 | |
| NEC-4040 | EDDY CURRENT RING PROBE | 1 | |
| NEC-4088-1 | Eddy current probe | 1 | |
| NEC-4100/TF | Eddy current probe | 1 | |
| NEC-6037 | Eddy current standard | 1 | |
| NEC-8012 | EDDY CURRENT PROBE SET, F-16 SIDE STICK CONTROLLER DIAPHRAGM | 1 | |
| NEC-8020 | PROBE SET, EDDY CURRENT | 1 | |
| NEC1005 | PROBE, EDDY CURRENT, NEC-1005 SPECIAL (NDT) | 1 | |
| NEC1062 | NDT EDDY CURRENT PROBE NEC-1062 | 1 | |
| NEC2111/TF | NDT EDDY CURRENT PROBE WITH AN OPERATING FREQUENCY | 1 | |
| NEC2111TF | NDT EDDY CURRENT PROBE WITH AN OPERATING FREQUENCY | 1 | |
| NEC2186 | EDDYCURRENT SPECIAL PROBES,2MHZ | 1 | |
| NEC3016UX | EDDY CURRENT PROBE | 1 | |
| NEC4031 | EDDY CURRENT PROBE | 1 | |
| NFE SHIELDED | Eddy current probe | 1 | |
| NORTEC 1000 | EDDY CURRENT MACHINE | 1 | |
| NORTEC 1200 | EDDY CURRENT MACHINE | 1 | |
| NORTEC 19E II | EDDY CURRENT INSTRUMENT | 1 | |
| NORTEC 2000D | EDDY CURRENT INSTRUMENT | 2 | |
| NORTEC 2000I | Eddy Current Tester | 1 | |
| NORTEC 500 | Eddy Current Instrument (Olympus NDT or equivalent) | 1 | |
| NORTEC 500D | Eddy Current Instrument Impedance−plane type (Olympus NDT or equivalent) | 1 | |
| NORTEC 600 | EDDY CURRENT DETECTOR | 2 | |
| NORTEC 600 D | EDDY CURRENT FLOW DETEKTORS NORTEC 600 SERIES | 3 | |
| NORTEC 600C | TEST INSTRUMENT - EDDY CURRENT | 1 | |
| NORTEC 600D | EDDY CURRENT DETECTOR | 3 | |
| NORTEC 600S | EDDY CURRENT EQUIPMENT, OLYMPUS | 1 | |
| NORTEC NDT-18 | EDDY CURRENT FLAW DETECTOR WITH FLYING DOT CRT | 1 | |
| NORTEC-2000D | EDDY CURRENT FLAW DETECTOR NDT | 2 | |
| NORTEC-600 | EDDY CURRENT FLAW DETECTOR | 2 | |
| NORTEC-600D | DUAL FREQUENCY EDDY CURRENT FLAW DETECTOR | 3 | |
| NORTEC-600S | EDDY CURRENT TESTER | 1 | |
| NORTEC2000D | NORTEC 2000D EDDY CURRENT | 2 | |
| NORTEC500D | EDDY CURRENT DETECTOR | 1 | |
| NORTEC600 | EDDY CURRENT TEST KIT | 2 | |
| NORTEC600D | EDDY CURRENT INSTRUMENT IMPEDANCE-PLANE TYPE OLYM | 3 | |
| NORTEC 600D | EDDY CURRENT TEST SET | 3 | |
| NORTED 600D | EDDY CURRENT TESTER | 1 | |
| NRK-3S/400SS | CUSTOM NAVY EDDY CURRENT BLOCK. Material: 400 Stainless Steel. 3 Plate assembly measuring 4" x 7" x .875", Contains 20 fastener holes with diameters ranging from .156" – .750"., 71 EDM notches in various locations (notch depth & lengths vary), Widths for | 1 | |
| NRK-3S/HX | CUSTOM NAVY EDDY CURRENT BLOCK. Material: Hastelloy X, 3 Plate assembly measuring 4" x 7" x .875", Contains 20 fastener holes with diameters ranging from .156" – .750"., 71 EDM notches in various locations (notch depth & lengths vary), Widths for all notc | 1 | |
| NRK-3ST | CUSTOM NAVY EDDY CURRENT BLOCK. Material: 4340 Cres Steel. 3 Plate assembly measuring 4" x 7" x .875", Contains 20 fastener holes with diameters ranging from .156" – .750"., 71 EDM notches in various locations (notch depth & lengths vary), Widths for all | 1 | |
| NRK-3T | CUSTOM NAVY EDDY CURRENT BLOCK. Material: 6AL-4V Titanium 3 Plate assembly measuring 4" x 7" x .875", Contains 20 fastener holes with diameters ranging from .156" – .750"., 71 EDM notches in various locations (notch depth & lengths vary), Widths for all n | 1 | |
| NRK-CASE | CASE FOR EDDY CURRENT STANDARD TOOL | 1 | |
| Nortec-2000D | Eddy Current Flaw Detector NDT | 2 | |
| OLYMPUS NORTEC 600C EDDY CURRENT FLAW DETECTOR | OLYMPUS NORTEC 600C EDDY CURRENT FLAW DETECTOR - EDDY CURRENT FLAW DETECTOR, INTERFACE WITH APPLICATION SELECTION PRE-SETS, LONG BATTERY LIFE (UP TO 10 HOURS), BRIGHT, 5.7 INCH (14,5 CM) VGA DISPLAY | 1 | |
| OLYMPUS NORTEC 600D | EDDY CURRENT FLAW DETECTOR (N600D-KIT-KE) | 1 | |
| OLYMPUSNORTEC600CEDDYCURRENTFLAWDETECTOR | OLYMPUS NORTEC 600C EDDY CURRENT FLAW DETECTOR - E | 1 | |
| OLYMUS NORTEC 2000D | EDDY CURRENT FLAW DETECTOR | 1 | |
| OMNI-M-ECA4-32 | OmniScan Eddy current module ECA | 1 | |
| OMNISCAN MX | C-Scan phased array eddy current instr. | 1 | |
| OMNISCAN-MX | C-Scan phased array eddy current Instrum | 1 | |
| Olympus Glider Scanner | Olympus Glider Scanner - Suitable for conventional ultrasonics, phased array ultrasonics, eddy current and ECA, Two axes with waterproof encoders for positionencoded X-Y scans | 1 | |
| Olympus Nortec 600C Eddy Current Flaw Detector | Olympus Nortec 600C Eddy Current Flaw Detector - Eddy current flaw detector, Interface with Application Selection pre-sets, Long battery life (up to 10 hours), Bright, 5.7 inch (14,5 cm) VGA display | 1 | |
| P/100-500KHZ/A/90.03/6 | EDDY CURRENT PROBE 100KHZ-500KHZ ABSOLUTE 90 | 1 | |
| P/100-500KHZ/A/90.5/6 | EDDY CURRENT PROBE 100KHZ - 500KHZ ABSOLUTE 90 | 1 | |
| P/100-500KHZ/A/90.75/6 | P/100-500KHZ/A/90.75/6EDDY CURRENT PROBE 100KHZ-500KHZ ABSOLUTE 90 | 1 | |
| P03196 | EDDY CURRENT NORTEC -19E2 | 1 | |
| P2D-M6 | EDDY CURRENT PROBE CABLE | 1 | |
| PAB-90-60.03 FX | HIGH FREQUENCY EDDY CURRENT | 1 | |
| PABM90C2401 | PROBE,EDDY CURRENT | 1 | |
| PABM90C401 | PROBE EDDY CURRENT | 1 | |
| PABM90C402 | PROBE EDDY CURRENT | 1 | |
| PABM90C605 | PROBE, EDDY CURRENT TESTING | 1 | |
| PEA104624 | PROBE ASSY EDDY CURRENT BOTTOM | 1 | |
| PEN4 | EDDY CURRENT PROBE 50-500 KHZ | 1 | |
| PEN45-4 | EDDY CURRENT PROBE | 1 | |
| PEN45-6 | EDDY CURRENT PROBE | 1 | |
| PEN91-4/2M | EDDY CURRENT PROBE | 1 | |
| PEN92-4 | EDDY CURRENT PROBE | 1 | |
| PEN92-5 | EDDY CURRENT PROBE | 1 | |
| PEN925-4/2M | EDDY CURRENT PROBE | 1 | |
| PEN95-6 | EDDY CURRENT PROBE | 1 | |
| PEN95-6/2M | EDDY CURRENT PROBE | 1 | |
| PENFLX95-6 | PROBE EDDY CURRENT : 6 IN. NOM O/A LG | 1 | |
| PENU925-6B30/1M | HF EDDY CURRENT PROBE | 1 | |
| PHASEC 2200 | Eddy Current Instrument, HOCKING | 1 | |
| PHASEC 2D | EDDY CURRENT SET | 1 | |
| PHASEC-3D | INSTRUMENT FOR DETECTION AND ANALYSIS OF EDDY CURRENTS IN ELECTRICAL CIRCUITS | 1 | |
| PHASEC2200 | EDDY CURRENT INSTRUMENT - IMPEDANCE−PLANE TYPE | 1 | |
| PHASEC2D | EDDY CURRENT EQUIPMENT | 1 | |
| PHASEC2S | EDDY CURRENT PHASEC 2 S | 1 | |
| PHASEC3 | EDDY CURRENT FLAW DETECTOR | 1 | |
| PHASEC3D | TOOL-EDDY CURRENT | 1 | |
| PKA 400-12E | LF eddy current probe | 1 | |
| PKA4H34-03-01 | EDDY CURRENT PROBE FOR LAP JOINT INSPECTION 100HZ THRU 40 KHZ | 1 | |
| PKA4H34-03-1 | EDDY CURRENT PROBE | 1 | |
| PL32-16 | PROBE BY EDDY CURRENT | 1 | |
| PL600 | EDDY CURRENT EQUIPMENT ELOTEST | 1 | |
| PPE-1041 | CAM FOLLOWER EDDY CURRENT PROBE | 1 | |
| PPE-1049 | CAM FOLLOWER EDDY CURRENT PROBE | 1 | |
| PPE-1065 | CAM FOLLOWER EDDY CURRENT PROBE | 1 | |
| PPE-1070 | CAM FOLLOWER EDDY CURRENT PROBE | 1 | |
| PPE-1078 | EXTENDED REACH CAM FOLLOWER EDDY CURRENT PROBE | 1 | |
| PROBE | EDDY CURRENT EQUIPMENT DEFECTOMETER | 1 | |
| PS002PS028-114N | EDDY CURRENT PENCIL PROBE 106P4F | 1 | |
| PS516CB/2.950L BORES | EDDY CURRENT PROBE. FOR | 1 | |
| PSO02PC195-114N | HIGH FREQUENCY EDDY CURRENT PROBE | 1 | |
| PWA 107436 | EDDY CURRENT – HPC INNER DIFFUSER AIR SEAL | 1 | |
| PWA 107722 | PROBE, EDDY CURRENT | 1 | |
| PWA 28403 | CRACK STD, EDDY CURRENT | 4 | |
| PWA 45833 | 8-9 STAGE BLADE EDDY CURRENT PROBE | 1 | |
| PWA 75909 | PROBE, EDDY CURRENT | 3 | |
| PWA101042 | EDDY CURRENT PROBE ASSEMBLY | 2 | |
| PWA104623 | PROBE ASSY EDDY CURRENT | 1 | |
| PWA104624 | EDDY CURRENT PROBE | 1 | |
| PWA107708 | EDDY CURRENT PROBE | 1 | |
| PWA107709 | EDDY CURRENT PROBE | 1 | |
| PWA107710 | EDDY CURRENT PROBE | 1 | |
| PWA28403 | CRACK STANDARD-EDDY CURRENT 1ST STAGE FAN BLADE | 4 | |
| PWA28404 | PROBE-EDDY CURRENT 1ST STAGE FAN BLADE LEAD.TRAIEDGE | 3 | |
| PWA28404E | PROBE-EDDY CURRENT 1ST STAGE FAN BLADE LEAD.TRAIEDGE | 1 | |
| PWA28443 | PROBE-EDDY CURRENT ENGINE ASSEMBLY FAN BLADE | 2 | |
| PWA28443A | PROBE-EDDY CURRENT ENGINE ASSEMBLY FAN BLADE | 1 | |
| PWA43226 | EDDY CURRENT PROBE | 1 | |
| PWA45942 | 1ST STAGE BLADE EDDY CURRENT PROBE | 1 | |
| PWA500576-4 | PROBE,EDDY CURRENT | 1 | |
| PWA500939 | STANDARY EDDY CURRENT | 1 | |
| PWA75909 | PROBE EDDY CURRENT | 3 | |
| PWA76394 | PROBE EDDY CURRENT | 1 | |
| PWA84305 | EDDY CURRENT PROBE | 1 | |
| PWA84306 | EDDY CURRENT STANDARD & CAL CARD | 1 | |
| PWA84314 | REFERENCE STANDARD FOR EDDY CURRENT TEST ON PW2000 SERIES ENGINE FAN BLADES | 1 | |
| PWA84316 | BOLT HOLE EDDY CURRENT PROBE | 1 | |
| PWA84351 | BOLT HOLE EDDY CURRENT PROBE | 1 | |
| PWA86686 | EDDY CURRENT INSPECTION KIT PW-4000 10TH STAGE COMPRESSOR DISK | 1 | |
| PWC31696 | EDDY CURRENT INSPECTION KIT | 1 | |
| PWC45291 | CALIBRATION PART EDDY CURRENT | 1 | |
| PWC57879 | CALIBRATION PART EDDY CURRENT | 1 | |
| Q0300015 | EDDY CURRENT TESTER | 1 | |
| Q0300017 | EDDY CURRENT FLAW DETECTOR N600D-KIT-KE | 2 | |
| QCT-146-6M-DRS | Eddy Current Probe | 1 | |
| QCT-154-6M-DRS | Eddy Current Probe, Ø.412-.409 | 1 | |
| QCT-155-6M-DRS | Eddy Current Probe. Ø.192-.189 | 1 | |
| RB.375-.158/1K | PROBE EDDY CURRENT | 1 | |
| RB.605-.200/300H | PROBE EDDY CURRENT | 1 | |
| RDP .8/.4-200H | EDDY CURRENT PROBES | 2 | |
| RDP _8/_4-200H | EDDY CURRENT PROBES | 2 | |
| RDP 1.0/.5-200H | EDDY CURRENT PROBES | 2 | |
| RDP.55/2K/CFRP | EDDY CURRENT PROBE | 1 | |
| RDP.75-500H-5 | EDDY CURRENT PROBES | 2 | |
| RDP1.0-100H-6 | EDDY CURRENT PROBES | 2 | |
| RDP1.2-100H-7 | EDDY CURRENT PROBES | 2 | |
| RDP1.25-.75/300H | EDDY CURRENT PROBES | 2 | |
| RDP1.25-.77/300H | EDDY CURRENT PROBES | 2 | |
| RDP1.35-.850/500H | EDDY CURRENT PROBES | 2 | |
| REDDY-32M | EDDY CURRENT TEST SET WITH PROBES | 1 | |
| RM120-C30-304-1 | GENERAL PURPOSE EDDY CURRENT REFERENCE STANDARD, 304 STAINLESS STEEL, 12 HOLES 3/16” TO ¾” DIAMETERS, EACH HOLE CONTAINS A .030” X .030” CORNER EDM NOTCH, THREE SURFACE NOTCHES - .010”, .020” & .040” DEEP X ¾” LONG | 1 | |
| RM120-C30-4340-1 | GENERAL PURPOSE EDDY CURRENT REFERENCE STANDARD, 4130 STEEL, 12 HOLES 3/16” TO ¾” DIAMETERS, EACH HOLE CONTAINS A .030” X .030” CORNER EDM NOTCH, THREE SURFACE NOTCHES - .010”, .020” & .040” DEEP X ¾” LONG | 1 | |
| RM120-C30-7075T6-1 | GENERAL PURPOSE EDDY CURRENT REFERENCE STANDARD, 7075-T6 ALUMINUM, 12 HOLES 3/16” TO ¾” DIAMETERS, EACH HOLE CONTAINS A .030” X .030” CORNER EDM NOTCH, THREE SURFACE NOTCHES - .010”, .020” & .040” DEEP X ¾” LONG | 1 | |
| ROHMANN ELOTEST B320 | EDDY-CURRENT INSTRUMENT | 1 | |
| RR.312SE/1.5WL | EDDY CURRENT HOLE PROBE | 1 | |
| RR.375SE/1.5WL | EDDY CURRENT HOLE PROBE | 1 | |
| RR.437SE/1.5WL | EDDY CURRENT HOLE PROBE | 1 | |
| RR.500SE/1.5WL | EDDY CURRENT HOLE PROBE | 1 | |
| RR0112-5/TF | EDDY CURRENT PROBES | 1 | |
| RR019-5/TF | EDDY CURRENT PROBES | 1 | |
| RRKIT-108SE | PROBE SET,EDDY CURRENT | 1 | |
| RR_156SE/1.1WL | EDDY CURRENT HOLE PROBE | 1 | |
| RS0824-2024T3 | EDDY CURRENT SURFACE REFERENCE STANDARD | 1 | |
| RSAF-7075T6 | EDDY CURRENT ST | 1 | |
| S2-830 | EQUIPMENT EDDY CURRENT DEFECTOSCOP | 1 | |
| S605S | EDDY CURRENT PROBE | 1 | |
| SB.275-200H-5 | PROBE EDDY CURRENT | 1 | |
| SB09270209-5 | Eddy Current Inspection Reference standard SB DC9-27-209 R07 | 1 | |
| SB09530016-5 | Eddy Current Inspection Reference standard SB MD-A27-320 R01 | 2 | |
| SB09530186-9 | Eddy Current Inspection Reference standard SB DC9-53-186 R06 | 1 | |
| SD2-832 | EDDY CURRENT EQUIPMENT DEFECTOSCOPE | 1 | |
| SE.4.44 | 328JET CALIBRATION STANDARD (SE.4.44); 51-60-01 PAGE 9/10 FIG.605 EDDY CURRENT | 1 | |
| SMART-UE1 | ULTRASONIC AND EDDY CURRENT INSTRUMENT | 1 | |
| SMARTUE1 | ULTRASONIC AND EDDY CURRENT INSTRUMENT | 1 | |
| SO111-7 | Custom FOKKER F28 Horizontal Stab. Drive Junction Fitting Eddy Current Standard per drawing # 28. 0-3210/2610-Material: 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| SP0-5463 | EDDY CURRENT PROBE | 1 | |
| SPC-524 | EDDY CURRENT PROBE | 1 | |
| SPEN35-4 | PROBE,EDDY CURRENT NSN:6635015074486 | 1 | |
| SPEN45-5 | EDDY CURRENT PROBE | 1 | |
| SPO 1957 | EDDY CURRENT PROBE | 1 | |
| SPO 1958 | EDDY CURRENT PROB | 1 | |
| SPO-1958 | EDDY CURRENT PROBE | 1 | |
| SPO-3806 | Eddy current probe | 1 | |
| SPO-3932 | EDDY CURRENT, SECOND LAYER, ALUMINUM | 1 | |
| SPO-6687 | CABLE (16-PIN LEMO TO TRIAX REFLECTION CABLE) - FOR EDDY CURRENT PROBES NORDEC-600 | 2 | |
| SPO2172 | PROBE - NORTEC EDDY CURRENT TEST | 1 | |
| SPO3806 | EDDY CURRENT PROBE | 1 | |
| SPO6626 | EDDY CURRENT PROBE | 1 | |
| SRSM-2510T | REFERENCE STANDARD, GENERAL EDDY CURRENT TESTING, TITANIUM ALLOY | 1 | |
| SS137-F2 | NDT REFERENCE STANDARD EDDY CURRENT | 1 | |
| ST4130 | BOMBARDIER / CANADAIR EDDY CURRENT SURFACE REFERENCE STANDARD PART 6 55-20-001, NOTCHES .008", .020", .040" (.005" Wide +000 / - .002 and +/- .001" Depth), MATERIAL: 4130 STEEL. Includes certification Report and Certificate of Conformance(COC)... | 1 | |
| SUB-24-28-1.4WL | EDDY CURRENT ROTARY PROBE FOR MINIMITE | 1 | |
| SUB-28-32-1.4WL | EDDY CURRENT ROTARY PROBE FOR MINIMITE | 1 | |
| SUPERHALEC | EDDY CURRENT EQUIPMENT | 1 | |
| SXA-270 | EDDY CURRENT ARRAY P | 1 | |
| SXA270 | EDDY CURRENT ARRAY P | 1 | |
| Sigma Check 2 | EDDY CURRENT CONDUCTIVITY METER | 1 | |
| TB-16 | NORTEC EDDY CURRENT STANDARD | 1 | |
| TEK-121P1A | EDDY CURRENT PROBE | 1 | |
| TEK-2047 | NDT EDDY CURRENT PROBE WITH AN OPERATING FREQUENCY | 1 | |
| TEK-2104 | Eddy Current Probe Airbus A330 57-44-04 PG1, 500Khz *ASK CUSTOMER FOR CONNECTOR INFO* | 1 | |
| TEK-3005R.156 | Eddy current, flexible shaft, bolt hole probe, .156 diameter, Rechii connector (4-pin Lemo), 100KHz-2MHz | 1 | |
| TEK-3005R.156/4WL | Eddy current, flexible shaft, bolt hole probe, .156 diameter, 4" working length Rechii connector (4-pin Lemo), 100KHz-2MHz | 1 | |
| TEK-3005R.187 | Eddy current, flexible shaft, bolt hole probe, .187 diameter, Rechii connector (4-pin Lemo), 100KHz-2MHz | 1 | |
| TEK-3005R.187/6WL | Eddy current, flexible shaft, bolt hole probe, .187 diameter, 6" working length Rechii connector (4-pin Lemo), 100KHz-2MHz | 1 | |
| TEK-3005R.250/6WL | Eddy current, flexible shaft, bolt hole probe, .250 diameter, 6" working length Rechii connector (4-pin Lemo), 100KHz-2MHz | 1 | |
| TEK-3005R.375/6WL | Eddy current, flexible shaft, bolt hole probe, .375 diameter, 6" working length Rechii connector (4-pin Lemo), 100KHz-2MHz | 1 | |
| TEK-3005U.156 | Eddy current, flexible shaft, bolt hole probe, .156 diameter, Universal connector, 100KHz-2MHz | 1 | |
| TEK-3005U.156/4WL | Eddy current, flexible shaft, bolt hole probe, .156 diameter, 4" working length Universal connector, 100KHz-2MHz | 1 | |
| TEK-3005U.187 | Eddy current, flexible shaft, bolt hole probe, .187 diameter, Universal connector, 100KHz-2MHz | 1 | |
| TEK-3005U.187/4WL | Eddy current, flexible shaft, bolt hole probe, .187 diameter, 4" working length Universal connector, 100KHz-2MHz | 1 | |
| TEK-4054-11A | EDDY CURRENT PROBE | 1 | |
| TEK-4085 | PROBE-EDDY CURRENT LOW FREQUENCY | 1 | |
| TEK-6007 | EDDY CURRENT, SECOND LAYER, ALUMINUM | 1 | |
| TEK-7002/4F | PROBE-EDDY CURRENT 1ST STAGE FAN BLADE LEAD.TRAIEDGE | 1 | |
| TEK-7009 | PROBE-EDDY CURRENT ENGINE ASSEMBLY FAN BLADE | 1 | |
| TEK-9117 | CRACK STANDARD-EDDY CURRENT 1ST STAGE FAN BLADE | 1 | |
| TEK-9970-958-576P01 | EDDY CURRENT PROBE C | 1 | |
| TEKIT-2016 | Eddy Current Pencil Probe Kit, Includes; PEN-6, PEN-6/2M, PEN95-6, PEN95-6/2M,..PEN45-6, PEN45-6/2M, PEN95-6B, PEN95-6B/2M, PENU-6, PENU-6/2M, BN-M6, RS0824-4340, -7075T6, -6AL4V, -304, Teflon Tape and Pelican Case | 1 | |
| TESTEREDDYCURRENT | EDDY CURRENT TESTER | 1 | |
| TPEN125-6C | EDDY CURRENT PROBE | 1 | |
| TPEN65-6C | EDDY CURRENT PROBE | 1 | |
| TPEN92-5B | EDDY CURRENT PROBE | 1 | |
| TPEN95-6/100-500K | EDDY CURRENT PROBE OLYMPUS P/100KHZ-500KHZ/A/905/6 | 1 | |
| TPEN95-6C | EDDY CURRENT PROBE | 1 | |
| TPENFLX-4 | EDDY CURRENT PROBE | 1 | |
| TPNFLX925-7/100K-.325-7-3/16 | EDDY CURRENT PROBE | 1 | |
| TSPEN45-6 | PROBE,EDDY CURRENT | 1 | |
| TSPEN90-4 | EDDY CURRENT PROBE | 1 | |
| TXPEN91-4C | PROBE EDDY CURRENT | 1 | |
| TYPE1B | EDDY CURRENT EQUIPMENT HALEC | 1 | |
| TYPEF | EDDY CURRENT EQUIPMENT DEFECTOMAT | 1 | |
| TYPEUH | EDDY CURRENT EQUIPMENT LOCATOR | 1 | |
| TYPEUHB | EDDY CURRENT EQUIPMENT LOCATOR | 1 | |
| U8010010 | PROBE, EDDY CURRENT | 1 | |
| U8030152 | EDDY CURRENT FLAW DETECTION | 2 | |
| U8030407 | NORTEC 600D EDDY CURRENT FLAW DETECTOR | 1 | |
| U8610181 | EDDY CURRENT PROBE | 1 | |
| U8610781 | NEC-2186 EDDY CURRENT PROBE (LT82-1E) | 1 | |
| U8616093 | PROBE,EDDY CURRENT | 2 | |
| U8630017 | NEC 4088-1 EDDY CURRENT PROBE | 2 | |
| U8680058 | EDDY CURRENT PROBE SET, F-16 SIDE STICK CONTROLLER DIAPHRAGM | 1 | |
| U8690029 | EDDY CURRENT CONDUCTIVITY PROBE, 60KHZ, 16-PIN LEMO CONNECTOR | 1 | |
| U8690030 | EDDY CURRENT CONDUCTIVITY PROBE, 480KHZ, 16-PIN LEMO CONNECTOR | 1 | |
| U8800082 | EDDY CURRENT PROBE CABLE | 1 | |
| U8800538 | EDDY CURRENT CABLE | 1 | |
| U8800738 | 16-PIN LEMO TO MICRODOT (EDDY CURRENT CABLE) | 1 | |
| UC1 40.0M/SS | EDDY CURRENT COUNTERSINK PROBE | 1 | |
| UC1 43.0M/SS | EDDY CURRENT COUNTERSINK PROBE | 1 | |
| UC1.250/4WL | EDDY CURRENT COUNTERSINK PROBE | 1 | |
| UR.375SE/1.4WL | EDDY CURRENT ROTARY PROBE FOR MINIMITE | 1 | |
| UR.437SE/1.4WL | EDDY CURRENT ROTARY PROBE FOR MINIMITE | 1 | |
| UR.750SE | EDDY CURRENT TESTER SPARES: PROBE UNIVERSAL ROTARY | 1 | |
| UR_750SE | EDDY CURRENT TESTER SPARES: PROBE UNIVERSAL R | 1 | |
| US-2494 | PROBE, EDDY CURRENT | 1 | |
| US-3179 | V-SHAPE EDDY CURRENT PROBE | 1 | |
| US-3180 | V-SHAPE EDDY CURRENT PROBE 3 MHZ | 1 | |
| US-454 | CURRENT, EDDY, VIDEO, STRIP, CHART | 1 | |
| US-454A | COM-14991 - INSTRUMENT - EDDY CURRENT, PORTABLE: | 1 | |
| VM 100PSS-3FE | EDDY CURRENT PENCIL PROBE OPERATING AT 100TO 500 KHZ WITH MICRODOT CONNECTOR | 1 | |
| VM 504900 | EDDY CURRENT PENCIL PROBE OPERATING AT 100TO 500 KHZ WITH MICRODOT CONNECTOR | 1 | |
| VM200-3 | EDDY CURRENT PROBE | 1 | |
| VM202A-3 | PROBE EDDY CURRENT | 1 | |
| VM229 | HF EDDY CURRENT PROBE | 1 | |
| VM2502RAFX-P325-.325X1.75DM | EDDY CURRENT PROBE | 1 | |
| VM2502RAFX-P325-1/4 X 7 | EDDY CURRENT PROBE | 1 | |
| VM30889-C1A | EDDY CURRENT GENERAL CALIBRATION STANDARD | 2 | |
| VM89A | GENERAL PURPOSE EDDY CURRENT REFERENCE STANDARD, 7075-T6 ALUMINUM, 12 HOLES 3/16” TO ¾” DIAMETERS, EACH HOLE CONTAINS A .030” X .030” CORNER EDM NOTCH, THREE SURFACE NOTCHES - .010”, .020” & .040” DEEP X ¾” LONG | 1 | |
| VM89S | GENERAL PURPOSE EDDY CURRENT REFERENCE STANDARD, 4130 STEEL, 12 HOLES 3/16” TO ¾” DIAMETERS, EACH HOLE CONTAINS A .030” X .030” CORNER EDM NOTCH, THREE SURFACE NOTCHES - .010”, .020” & .040” DEEP X ¾” LONG | 1 | |
| VM89SS | GENERAL PURPOSE EDDY CURRENT REFERENCE STANDARD, 304 STAINLESS STEEL, 12 HOLES 3/16” TO ¾” DIAMETERS, EACH HOLE CONTAINS A .030” X .030” CORNER EDM NOTCH, THREE SURFACE NOTCHES - .010”, .020” & .040” DEEP X ¾” LONG | 1 | |
| VMA3RS-062 | EDDY CURRENT REFERENCE ATANDARD | 1 | |
| VMA3RS-1.0 | HF EDDY CURRENT REFERENCE STANDARD | 1 | |
| VMD120-05- 6-.375SH-NC | PROBE FOR EDDY CURRENT DEVICE | 1 | |
| WHEELSCAN 5 | EDDY CURRENT (STATIONARY) | 1 | |
| WHEELSCAN MK IV | AUTOMATIC EDDY CURRENT A/C WHEEL INSPECTION (NDT) | 1 | |
| Z145P | PROBE, EDDY CURRENT - PENCIL TYPE (OTHER PROBES AVAILABLE, DETERMINE BY APPLICATION) | 1 | |
| ZES-HHT-MIZ-21C-DF | EDDY CURRENT TESTER | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
