| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| TEK-1522 | ET PROB | 1 | |
| TEK-1542 | ET PROB | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 1159GSE50575-255 | FUEL QUANTITY PROBE SELECTOR TEST SET (CALIBRATION) | 1 | |
| (CALIB) 803B | ETS ESD COMPLIANT RESISTANCE PROBE (CALIBRATION) | 1 | |
| (CALIB) 952001 | RF Voltmeter Probes (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98S34005000000 | ALPHA PROBE PROTACTOR SET | 1 | |
| (CALIB) JC410C | VOLTMETER, W/PROBE (CALIBRATION) | 1 | |
| (CALIB) LTCT28960-01 | TEMPRETURE PROBE KIT (CALIBRATION) | 1 | |
| (CALIB) PSD60-2R | FUEL QTY PROBE TEST SET (CALIBRATION) | 2 | |
| (CALIB) PWA12116E | PT2 INLET PROBES (CALIBRATION) | 1 | |
| 00-010032 | PROBE DOVETAIL CONVEX | 1 | |
| 00-010106 | PROBE DOVETAIL CONCAVE | 1 | |
| 00-010124 | MSW-QC PROBE, 2.25MHZ, 0.5” DIAMETER | 1 | |
| 00125 | PROB LEADS W/SCRW-ON ALGTR CLP(1SET) | 1 | |
| 0061BN1 | ICE DETECTOR PROBE COVER | 11 | |
| 0061BNI | COVER-PROBE, ICE DETECTOR | 1 | |
| 0154LF | PROBE P20T20 ENGINE INLET | 1 | |
| 0319103580 | MAGNETIC PROBE | 1 | |
| 0U145506 | MULTIMETER - DIGITAL/ANALOG (OR EQUIVALENT METER MEETS TASK REQUIREMENTS) 1 1863 MEGOHMMETER 1 14053 WIRE RETRIEVER 1 36122 ADAPTOR-CHARGING,PITOT PROBE 1 173784 ADAPTER OXYGENT SEVICING 2 897000 WING JACK 1 2231058 RING GAUGE 1 2239106 LOADCHECKING | 24 | |
| 1.837.01-2100 | EDDY CURRENT PROBES FOR DEFECTOMETER M 1.837 | 1 | |
| 1.837.01-9900 | PROBE CABLE FOR DEFECTOMETER M | 1 | |
| 10022626 | SONDICATOR PROBE (FOR ULTRASOUND) 1.25-IN SONDICATOR CONTACT PROBE WITH 1/2-IN SPACING REPLACEABLE TORLON PROBE TIPS, 2-PIECE PLASTIC ELEMENTS,AND ALARM INDICATING LIGHT FOR USE WITH S-21R & MIZ-21SR INSTRUMENTS. 8 FT CABLE LENGTH. (MADE BY ZETEC INC.) | 1 | |
| 101-00420 | FUEL QTY PROBE TEST SET | 9 | |
| 101-00449B | WET WING PROBE HARNESS (BARFIELD INC.) | 3 | |
| 101B-3/16 | PROBE , BOLT HOLE 3/16 INCH DIAMETER | 1 | |
| 102P1 | STRAIGHT SURFACE PROBE, Ø.125" TIP X 1.5" LONG, 1-3MHZ, MICRODOT, STAINLESS STEEL 1" X .25 DIAMETER | 1 | |
| 105P4F | Probe − surface, straight, 500 kHz frequency, Fe/NFe,absolute, shielded, 4.50 in. (114.3 mm) long, 0.130 in.3.3 mm) tip diameter, (General Electric P/N 105P4F or equivalent) | 1 | |
| 105P4XFU | PROBE STRAIGHT, FREQUENCY RANGE 50 KHZ TO 500 KHZ, NFE, SHIELDED, ABSOLUTE, 0.092 IN. (2.34 MM) TIP DIAMETER, 4.50 IN. (114.30 MM) LENGTH. (GEIT OR EQUIVALENT) | 1 | |
| 106P4F | PROBE, 2.0 MHZ FREQUENCY, SHIELDED, ABSOLUTE, NFE/FE, 0.092 IN (2.34 MM) DIAMETER, 4.50 IN. (114.30 MM) LENGTH, (GE OR | 2 | |
| 113-552-013 | DA 512 PROBE. 7.5MHZ X 7.5MM DIAMETER, RANGE 0.6-60MM IN STEEL W/POTTED CABLE. | 1 | |
| 1159GSE50100-45 | L & R ICE DETECTOR PROBE COVER | 1 | |
| 1159GSE50575-255 | FUEL QUANTITY PROBE SELECTOR TEST SET | 1 | |
| 118-440-003 | DELAY LINE SHOE, 0.375” LENGTH, 0.75” OD FOR ½” DIAMETER MSWQC PROBE, | 1 | |
| 118-440-005 | DELAY LINE SHOE, 1” LENGTH, 1” OD FOR ½” DIAMETER MSWQC PROBE, | 1 | |
| 11C4308P02 | ENGINE PROBE BOEING 787, BOEING 747-800 GENX (LONG AND SHORT PROBES COMBINATION SET) | 2 | |
| 12-A320-006AV | PROBE-NON METALIC FLEXIBLE | 1 | |
| 1289950 | DEFECTOMETER SURFACE PROBE, STRAIGHT, 3" WITH .5" LONG TIP AND 2.5" HANDLE, SHIELDED, AUSTENITIC, 2M | 1 | |
| 12AAA787 | Mitutoyo 12AAA787 Block for Calibrating Probe Diameter | 1 | |
| 12AAA788 | Mitutoyo 12AAA788 Ø4mm Ball Offset Probe | 1 | |
| 12AAA789 | Mitutoyo 12AAA789 Ø6mm Ball Offset Probe | 1 | |
| 12AAF672 | Mitutoyo 12AAF672 Ø1mm Ball Offset Probe | 1 | |
| 12AAF673 | Mitutoyo 12AAF673 Ø2mm Ball Offset Probe | 1 | |
| 136/347/6 | PROBE: FOR SIGMATEST D-2.068 EDDY C/SET | 1 | |
| 145T05934-401 | ADAPTERREFUELLINGPROBETEST | 1 | |
| 1460188 | FOERSTER DEFECTORMETER PROBE CABLE 1.3M | 1 | |
| 192-007 | Mitutoyo 192-007 Two-Directional Touch Signal Probe (Metric) | 1 | |
| 1C8075 | PROBE, COMPR. INLET TEMP-ENG. TEST | 1 | |
| 1C8075 REV C | PROBE, COMPR. INLET TEMP-ENG. TEST | 1 | |
| 2-069-69-0002 | PROBE & CALIBRATION BLOCK SET | 1 | |
| 2-069US9068074 | PROBE - MAGNETISECHE PRUEFANLAGEN GMBH | 1 | |
| 2-154-301 | PROBE-FE AUST FLAT TYPE FOR DEFECTOMETER | 1 | |
| 2-832-01-2200 | PROBE SET | 1 | |
| 2-835-07-6901 | DEFECTOMETER SURFACE PROBE, 90°, .5" DROP, 5" LONG, .156" SHAFT, .098 TIP, SHIELDED, NON-FERROUS, 25 | 2 | |
| 2-835-69-200 | DEFECTOMETER SURFACE PROBE, STRAIGHT, .098" DIAMETER, 3" LONG WITH .5" LONG TIP AND 2.5" HANDLE, SH | 1 | |
| 2-835-69-2000 | DEFECTOMETER SURFACE PROBE, STRAIGHT, .098" DIAMETER, 3" LONG WITH .5" LONG TIP AND 2.5" HANDLE, SH | 1 | |
| 2-835-74-6901 | ET HF PROBE, 2MHZ ABSOLUTE SHIELDED, 2.5 MM DIA, 45 DEGREES | 1 | |
| 2.835.01-2000 | Defectometer Surface Probe, Straight, 5", Shielded, Non-ferrous, Shielded | 1 | |
| 2.835.01.2100 | DEFECTOMETER SURFACE PROBE, 90°, .4" DROP, 7" LONG, .156" SHAFT, SHIELDED, NON-FERROUS, 25° BEND APP | 1 | |
| 2.835.01.3000 | DEFECTOMETER SURFACE PROBE, STRAIGHT, 3" WITH .5" LONG TIP AND 2.5" HANDLE, SHIELDED, AUSTENITIC, 2M | 1 | |
| 202P001 | PROBE SURFACE 45 DEGREE CRANKED, 2 MHZ FREQUENCY, NFE, ABSOLUTE, SHIELDED, 0.130 IN. (3.30 MM) TIP DIAMETER, 8.00 IN. (203.2 MM) LONG, 0.75 IN. (19.1 MM) CRANK LENGTH, (HOCKING OR EQUIVALENT) | 1 | |
| 205P4F | PROBE, 45 DEGREE, 50 KHZ TO 500 KHZ FREQUENCY RANGE, SHIELDED, ABSOLUTE FE/NFE, 0.13 IN. (3.3 MM) DIAMETER, 4.50 IN. (114.3 MM) LENGTH, 0.75 IN. (19.1 MM) TIP LENGTH, (GEIT OR EQUIVALENT) | 1 | |
| 205P4XF | SURFACE PENCIL PROBE, CRANKED 45 DEGREE TIP, 50 KHZ - 500 KHZ FREQUENCY, NFE/FE, ABSOLUTE, SHIELDED, 0.092 IN. (2.34 MM) TIP DIAMETER, 4.50 IN. (114.3 MM) LENGTH, 0.75 IN. (19.5 MM) TIP LENGTH, (GEIT OR EQUIVALENT) | 1 | |
| 205P4XFU | PROBE 45 DEGREE, CRANKED, ABSOLUTE SHIELDED, 50-500 KHZ FREQUENCY, NFE/FE, 0.092 IN. (2.34 MM) TIP DIAMETER, 4.50 IN. (114.3 MM) LONG, 0.75 IN. (19.1 MM) TIP LENGTH, (GEIT OR EQUIVALENT) | 1 | |
| 206P4F | PROBE - SURFACE 45 DEGREE CRANKED, 350 KHZ TO 3 MHZ FREQUENCY, NFE/FE, ABSOLUTE, SHIELDED, 0.092 IN. (2.34 MM) DIAMETER, 4.50 IN. (114.3 MM) LONG, 0.750 IN. (19.5 MM) TIP LENGTH, | 1 | |
| 23 | Tesa 03230027 GT 27 / Standard probes, ± 2 mm, 10,3 mm travel, with long retraction travel (GT27) | 1 | |
| 23029-81 | HUMIDITY/TEMPERATURE PAPERLESS RECORDER; DETACHABLE PROBE | 1 | |
| 241-043(1MHZ) | ULTRASONIC PENETRATION PROBE | 1 | |
| 244-043(5MHZ) | ULTRASONIC PENETRATION PROBE | 1 | |
| 2548G-26B | WET WING PROBE HARNESS (BARFIELD INC.) | 1 | |
| 2620T | "THERMOMETER - DIGITAL, 0-150 +/- 2DEGREE F, WITH A PROBE, THERMOCOUPLEEQUIVALENT" | 1 | |
| 269-48030-0000L | BORESCOPE 8MM PROBE WITH 3 METRE LENGTH SCOPE. | 1 | |
| 28-0-1862 | ICE DETECTOR PROBE TESTER | 1 | |
| 28.0-1862 | ICE DETECTOR PROBE TESTER | 1 | |
| 3-115-0527 | ULB TEST SET PROBE | 1 | |
| 30-840-9001 | Sylvac 30-840-9001 Ball Probe Diameter 8mm for ONE Smart Digital Height Gauge | 1 | |
| 306P15 | ET PROBE 2 MHZ NFE | 1 | |
| 309P24 | PROBE - PENCIL, 90 DEGREES, 500KHZ FREQUENCY, FE/NFE ABSOLUTE, SHIELDED, 0.175 IN. (4.45 MM ) DIAMETER, 4.5 IN. ( 114.3 MM ) LONG, 0.25 IN. (6.4 MM ) TIP LENGTH. (GE OR EQUIVALENT) | 1 | |
| 309P24F | PROBE 90 DEGREES, RIGHT ANGLE, 50 KHZ TO 500 KHZ FREQUENCY RANGE, SHIELDED, ABSOLUTE, FE/NFE, 0.13 IN. (3.3 MM) DIAMETER, 4.50 IN. (114.3 MM) LENGTH, 0.250 IN. (6.35 MM) TIP LENGTH, (GEIT OR EQUIVALENT) | 1 | |
| 309P24XFU | SURFACE PENCIL PROBE, 90º, 50 KHZ TO 500 KHZ FREQUENCY, NFE/FE, ABSOLUTE, SHIELDED, 0.092 IN. (2.336 MM) DIAMETER, 4.5 IN. (114.3 MM) LENGTH, 0.250 IN. (6.35 MM) TIP LENGTH, (KRAUTKRAMER OR EQUIVALENT) | 1 | |
| 309P56F | PROBE - SURFACE, 90 DEGREES, 500 KHZ FREQUENCY, FE/NFE ABSOLUTE, SHIELDED, 0.130 IN. (3.30 MM) DIAMETER, 6.00 IN. (152.4 MM) LONG, 1.00 IN. (25.4 MM) TIP LENGTH, (GE OR EQUIVALENT) | 1 | |
| 310P14F | PROBE - SURFACE 90 DEGREE, 2 MHZ FREQUENCY, NFE, ABSOLUTE, SHIELDED, 0.092 IN. (2.34 MM) DIAMETER, 4.50 IN. (114.3 MM) LONG, 0.11 IN. (2.8 MM) TIP LENGTH, (GEIT OR EQUIVALENT) | 1 | |
| 310P24F | PROBE - SURFACE 90 DEGREES, 350 KHZ TO 3 MHZ FREQUENCY, FE/NFE, ABSOLUTE, SHIELDED, MICRODOT CONNECTOR, 0.092 IN. (2.34 MM) DIAMETER, 4.50 IN (114.3 MM) LONG, 0.250 IN. (6.35 MM) TIP LENGTH, (GEIT OR EQUIVALENT). | 1 | |
| 313P24F | PROBE - PENCIL, 15 DEGREES CRANK, 90 DEGREES, 500KHZ FREQUENCY, FE/NFE ABSOLUTE, SHIELDED, 0.129 IN. (3.3 MM ) DIAMETER, 4.5 IN. ( 114.0 MM ) LONG, 0.25 IN. (6.40 MM ) TIP LENGTH. (GE OR EQUIVALENT) | 1 | |
| 33410SAS-90-4 | TEST SET - PITOT PROBE | 7 | |
| 3403116-1 | ADAPTER SET, TEST SET, FUEL TANK PROBES | 1 | |
| 379-010-550 | SURFACE PROBE: 0.093 INCH (2,36 MM) DIAMETER, 200 KHZ, ABS | 1 | |
| 384KR | ICE DETECTOR PROBE PROTECTOR COVER | 2 | |
| 4100S019-08 | ICE DETECTOR PROBE | 1 | |
| 51 2B | FLUKE 51 II WIRED DIGITAL THERMOMETER FOR INDUSTRIAL USE, E, J, K, T PROBE, 1 INPUT(S), +1372°C MAX, | 2 | |
| 52Ⅱ | THERMOMETER & PROBE SET | 5 | |
| 53-61-20 | ET PENCIL PROBE TYPE: DIFFERENTIAL FERRITE CORE , SHIELDED. FREQUENCY RANGE: 500KHZ - 3MHZ , AS PER ATR 72 NTM 53-61-20 | 1 | |
| 5953642-1 | PHOTOMETER PROBE TESTER | 5 | |
| 602-128 | PROBE - THICKNESS MEASUREMENT, PENCIL-TYPE, MODEL ETA3.3H | 1 | |
| 604-142 | PROBE - THICKNESS MEASUREMENT, EDDY CURRENT METHOD | 3 | |
| 610-055-077 | PROBE ET HAUTE FREQUENCE 50-500 KHZ | 1 | |
| 610-057-077 | PROBE ET HAUTE FREQUENCE 350KHZ-3MH | 1 | |
| 610-065-077 | PROBE ET HAUTE FREQUENCE 50-500 KHZ | 1 | |
| 610-067-077 | PROBE ET HAUTE FREQUENCE 350KHZ-3MH | 1 | |
| 610-087-014 | PROBE ET HAUTE FREQUENCE 350KHZ-3MH | 1 | |
| 610-095-171 | PROBE ET HAUTE FREQUENCE 350KHZ-3MH | 1 | |
| 610-097-171 | PROBE ET HAUTE FREQUENCE 350KHZ-3MHZ | 1 | |
| 615P012F035 | FASTENER HOLE PROBE - DIFFERENTIAL ROTATING METAL 4.8 MM (200 KHZ - 2 MHZ)(GE HOCKING P/N 615P012F035) | 2 | |
| 615P016 | ROTARY PROBE, DIAMETER 0.250 IN (6.35 MM,)FREQ. 200 KHZ ‐ 2 MHZ | 1 | |
| 615P016F035 | DYNAMIC ROTATING METAL PROBE EDDY CURRENT TOOLS | 2 | |
| 615P04F035 | DYNAMIC ROTATING METAL PROBE EDDY CURRENT TOOLS | 1 | |
| 620-546-156 | PROBE, ROTATING HOLE, REFLECTION TYPE, 200 KHZ TO 2 MHZ, 3/16”, 1/4”, AND 5/16” DIAMETER | 1 | |
| 6200-3/16-BN-BNC | PROBE 3/16 INCH DIAMETER | 1 | |
| 6200-5/16-BHBNC | PROBE, BOLT HOLE, 5/16-INCH DIAMETER | 1 | |
| 620UK-403V4 | 4 WIRE MINI PROBE SET | 1 | |
| 630-406S | HEAVY DUTY SPEAR KELVIN PROBE SET – 5 FEET | 1 | |
| 65C37849-41 | TOPKIT - RETROFIT FOR AIR DATA PROBE HEA | 1 | |
| 700P07A9ECO | REFLECTION 1KHZ,ET PROBE | 1 | |
| 700P16A | PROBE SPOT FACE 300 HZ -100 KHZ, REFLECTION, 0.620 IN. (15.75 MM) DIAMETER, 1.77 IN. (44.96 MM) HEIGHT (GEIT OR EQUIVALENT) | 1 | |
| 72051584-1 | ADAPTER-PROBE,LIGHT METER | 1 | |
| 7637987-17 | A53-142 Douglas DC-9 Probe Holding Fixture and alignment 2024-T3 Clad Aluminum. Figure 1, Sheet 4 | 1 | |
| 8345 | METER - AIR VELOCITY/TEMPERATURE, SELECTABLE UNITS - METRIC/ ENGLISH (ANEMOMETER PROBE DIAMETER IS 0.236 INCH). SUITABLE (TSI, INCORPORATED) | 1 | |
| 8384 | METER - AIR VELOCITY/TEMPERATURE, SELECTABLE UNITS - METRIC/ ENGLISH (ANEMOMETER PROBE DIAMETER IS 0.276 INCH). NOT A R (TSI, INCORPORATED) | 1 | |
| 9535 | METER - AIR VELOCITY/TEMPERATURE, SELECTABLE UNITS - METRIC/ ENGLISH (ANEMOMETER PROBE DIAMETER IS 0.236 INCH). SUITABLE | 7 | |
| 65181 | PROBE DIN 65181 (FOR MEGOMETRE) | 1 | |
| 77203 | TERMINAL PROBE ADAPTER SET | 1 | |
| 79784 | MAGNETIC PROBE MasterEx 79784 - II 2G Ex IIB T3 | 1 | |
| 88001 | Probe - Surface Temperature Note: Thermometer Hh-21 or Hh-40 Series is switchable To J, K or T Type | 1 | |
| 521043 | DIG HALL EFFECT PROBE MET | 1 | |
| 600086 | Cable for Parametric Probe EK-1,5-019 | 1 | |
| 601273 | Parametric Probe KAPS183-1E.05 | 1 | |
| 601275 | Parametric Probe KAPS181-1E.05 | 1 | |
| 601276 | Parametric Probe KAPS214-1E.05 | 1 | |
| 601279 | Parametric Probe KAPS189-1E.05 | 1 | |
| 601950 | Probe, 4.0mm Diameter,90mm WL, | 1 | |
| 601951 | Probe, 4.1mm Diameter, 90mm WL, Universa | 1 | |
| 601952 | Probe, 4.8mm Diameter,90mm WL | 1 | |
| 601953 | Probe, 5.1mm Diameter,90mm WL | 1 | |
| 601954 | Probe, 5.5mm Diameter, 90mm WL, Universa | 1 | |
| 601955 | Probe, 6.2mm Diameter,90mm WL | 1 | |
| 601956 | Probe, 6.3mm Diameter, 90mm WL | 1 | |
| 601957 | Probe, 6.4mm Diameter, 90mm WL | 1 | |
| 601958 | Probe, 6.7mm Diameter, 90mm WL | 1 | |
| 601959 | Probe, 7.1mm Diameter, 90mm WL | 1 | |
| 601960 | Probe, 7.5mm Diameter, 90mm WL | 1 | |
| 601961 | Probe, 7.9mm Diameter, 90mm WL | 1 | |
| 601962 | Probe, 8.3mm Diameter, 90mm WL | 1 | |
| 601963 | Probe, 8.7mm Diameter, 90mm WL | 1 | |
| 601964 | Probe, 9.5mm Diameter, 90mm WL | 1 | |
| 601965 | Probe, 9.9 mm Diameter, 90mm WL | 1 | |
| 601966 | Probe, 10.2 mm Diameter, 90mm WL | 1 | |
| 682695 | STETHOSCOPE MECHANICS, 12 INCH PROBE | 1 | |
| 706045 | PROBE, AIR INLET TEMPERATURE | 1 | |
| 922236 | SPO-887L CONDUCTIVITY PROBE, 60 KHZ, STRAIGHT PROBE, .312 IN. DIAMETER WITH ALARM LED, 16-PIN LEMO C | 1 | |
| 951144 | Mitutoyo 951144 Centre Probe (with Metric Holding Bar) | 1 | |
| 6795794 | PROBE TEMPERATURE COMPRESSOR AIR INLET | 2 | |
| 6798143 | PLENUM – AIR INLET COMPRESSOR (USE WITH 6798142 PROBE) | 1 | |
| 807-102-000-011 | TOOL, ICE DETECT PROB | 5 | |
| 80I-600A | CLAMP MULTIMETERS & ACCESSORIES CURRENT PROBE (FLUKE) | 1 | |
| 81301001-415 | VIDEOSCOPE / BORESCOPE WITH 3.9 MM PROBE, AND 1.5 METRE SCOPE LENGTH. | 1 | |
| 8211/8221 | ELECTROMAGNETIC RADIATION MONITOR/PROBE | 1 | |
| 851P002 | ET DUAL ELEMENT PROBE | 1 | |
| 885N | PITOTSTATICPROBETIPINSPECTION | 2 | |
| 8EH2ABR1 | T5.4 CABLE FOR 2 PROBES, LENGTH: 2FT (AMETEK) | 1 | |
| 8EH2ABT1 | T5.4 CABLE FOR 3 PROBES, LENGTH: 3 FT (AMETEK) | 1 | |
| 9213012 | SURFACE PROBE, STANDARD BRIDGE DETACHABLE SURFACE | 1 | |
| 9213550 | SURFACE PROBE, STANDARD REFLECTION DETACHABLE SURFACE PROBE WITH A DIAMETER OF .25 IN. (6.3 MM) AND | 1 | |
| 9213551 | SR/700HZ-80KHZ/0.31 DETACHABLE SURFACE PROBE | 1 | |
| 9216657 | PROBE SET | 1 | |
| 9216658 | PROBE SET,EDDY CURRENT | 1 | |
| 9217153 | NORTEC SPO-3564, ROTATING SCANNER PROBE. PROBE DIAMETER 0.187IN – 0.218IN. WORKING LENGTH 1.1IN (28MM) | 1 | |
| 9217157 | RECHII SCANNER PROBE, SPREAD END, .312"-.375" DIAMETER, 1.5" WL 100KHZ - 2MHZ | 1 | |
| 9219985 | UNIVERSAL ROTARY HOLE PROBE 0.500 INCH (12.6 MM) TO 0.562 INCH (14.2 MM) DIAMETER | 1 | |
| 9222164 | METAL AXIS PROBE | 3 | |
| 9222193 | SURFACE PROBE, POWERLINK STANDARD BRIDGE DETACHABLE SURFACE PROBE WITH A DIAMETER OF .62 IN. (15.7 M | 1 | |
| 9222202 | PROBE, SURFACE, SHIELDED, 1/8-INCH DIAMETER, 100-500 KHZ | 2 | |
| 9222340 | CONDUCTIVITY PROBE, 60 KHZ, RIGHT ANGLE PROBE, 0.750 IN. (20 MM) TIP DIAMETER, 1.00 IN. (25.4 MM) LE | 2 | |
| 9230078 | ROTATING SCANNER PROBE, SPO-3564, PROBE DIAMETER 0.156 IN. -0.187 IN. | 1 | |
| 9230531 | UNIVERSAL ROTARY HOLE PROBE 0.125 INCH (3.17 MM) TO 0.156 INCH (3.96 MM) DIAMETER, SELF EXPANDING 1.75 INCH (44 MM) WORKING LENGTH, OPERATING FREQUENCY 200 KHZ - 3 MHZ FISCHER 4 PIN CONNECTOR, REFLECTION DIFFERENTIAL COIL CONFIGURATION (SPO-5965 .125-.156 | 1 | |
| 9230784 | RECHII SCANNER PROBE, SPREAD END, .125"-.156" DIAMETER, 1.1" WL 100KHZ - 2MHZ | 1 | |
| 9317793 | 9317793 : S-PR-3 RESONANCE PRO S-PR-3 RESONANCE PROBE 110 KHZ (+/- 10 KHZ) IN A 0.625 IN. DIAMETER C | 1 | |
| 9317795 | 9317795 : S-PR-5 RESONANCE PRO S-PR-5 RESONANCE PROBE 250 KHZ (+/- 10 KHZ) IN A 0.375 IN. DIAMETER C | 1 | |
| 9317796 | S-MP-3 MECHANICAL IMPEDANCE ANALYSIS PROBE, STANDARD, RIGHT ANGLE PROBE, .5 IN. TIP DIAMETER (CAN BE | 1 | |
| 9317808 | RIGHT ANGLE MIA PROBE, SMALL 6.35 MM (0.25") TIP DIAMETER, REQUIRES BMM-H (U8770417) FOR SPRING LOAD | 1 | |
| 9322075 | RIGHT ANGLE MIA PROBE, INTERNAL ADJUSTABLE SPRING TENSION, STANDARD 12.7 MM (0.5") TIP DIAMETER | 1 | |
| 9322078 | BONDMASTER PROBE SET | 1 | |
| 9322120 | PITCH CATCH ULTRASONIC TESTING PROBES (SET OF 2) | 1 | |
| 9323944 | PROBE SET | 1 | |
| 9403408 | ET SURFACE PROBE TIP ANGLE 90 DEGREE FREQUENCY 200KHZ-1MHZ | 1 | |
| 700042321 | CFM56 ENGINE PROBES SET | 1 | |
| 700042322 | V2500 ENGINE PROBES SET | 1 | |
| 9565-A | METER, MULTIFUNCTION &ARTICULATING PROBE | 4 | |
| 98D10103500001 | STATIC PROBE SET COVER | 24 | |
| 98D10103500042 | PROBE COVER SET | 13 | |
| 98D10103501000 | COVER - ICE DETECTION PROBE | 23 | |
| 98D34103004001 | CLEANER SET, PITOT PROBE | 31 | |
| 98F34103001000 | ADAPTOR PITOT PROBE (SET DE 3) | 16 | |
| 98L10001006000 | ICE DETECTOR PROBE | 10 | |
| 98S 340 0 5000 000 | ALPHA PROBE LOCATOR SET | 11 | |
| 98S34005000000 | Alpha Probe Locator Set | 11 | |
| 98S51605001-212 | ATR REFERENCE STANDARD 2024-T3 Aluminum PT 6 51-60-00. Calibration Standard for Rotary Probes..Figure 616 (Sheet 1) Page 629, Hole Sizes: ( 9.5mm, 9.9mm, 10.3mm, 11.1mm, 11.5mm, 11.9mm, 12.7mm, 13.5mm, 14mm ). Includes Test Report and Certificate of C... | 4 | |
| 98S51605001-214 | ATR REFERENCE STANDARD 15-5PH Steel PT 6 51-60-00. Calibration Standard for Rotary Probes..Figure 616 (Sheet 1) Page 629, Hole Sizes: ( 9.5mm, 9.9mm, 10.3mm, 11.1mm, 11.5mm, 11.9mm, 12.7mm, 13.5mm, 14mm ). Includes Test Report and Certificate of Confo... | 4 | |
| 98S51605001-216 | ATR REFERENCE STANDARD ..TA6V(6AL-4V) Titanium PT 6 51-60-00. Calibration Standard for Rotary Probes..Figure 616 (Sheet 1) Page 629, Hole Sizes: ( 9.5mm, 9.9mm, 10.3mm, 11.1mm, 11.5mm, 11.9mm, 12.7mm, 13.5mm, 14mm ). Includes Test Report and Certifica... | 3 | |
| 98S51605001-218 | ATR REFERENCE STANDARD 2024-T3 Aluminum PT 6 51-60-00. Calibration Standard for Rotary Probes..Figure 616 (Sheet 1) Page 629, Hole Sizes:( 3.6mm, 4mm, 4.8mm, 5.2mm, 5.7mm, 6.4mm, 6.7mm, 7.1mm, 7.9mm, 8.3mm, 8.7mm ). Includes Test Report and Certificat... | 3 | |
| 98S51605001-220 | ATR REFERENCE STANDARD PT 6 51-60-00 15-5PH stainless steel Calibration Standard for Rotary Probes Figure 616 (Sheet 1) Page 629, Hole Sizes:( 3.6mm, 4mm, 4.8mm, 5.2mm, 5.7mm, 6.4mm, 6.7mm, 7.1mm, 7.9mm, 8.3mm, 8.7mm ). Includes Test Report and Certifi... | 4 | |
| 98S51605001-222 | ATR REFERENCE STANDARD TA6V(6AL-4V) Titanium PT 6 51-60-00. Calibration Standard for Rotary Probes..Figure 616 (Sheet 1) Page 629, Hole Sizes:( 3.6mm, 4mm, 4.8mm, 5.2mm, 5.7mm, 6.4mm, 6.7mm, 7.1mm, 7.9mm, 8.3mm, 8.7mm ). Includes Test Report and Cert... | 3 | |
| 98S51605001-224 | ATR REFERENCE STANDARD 2024-T3 Aluminum PT 6 51-60-00. Calibration Standard for Rotary Probes..Figure 616 (Sheet 1) Page 629, Hole Sizes:( 14.3mm, 14.6mm, 15.1mm, 15.9mm, 16.3mm, 16.7mm, 28.9mm, 19.8mm, 22.2mm, 22.6mm, 23mm ). Includes Test Report and... | 4 | |
| 98S51605001-226 | ATR REFERENCE STANDARD 15-5PH Steel PT 6 51-60-00. Calibration Standard for Rotary Probes..Figure 616 (Sheet 1) Page 629, Hole Sizes:( 14.3mm, 14.6mm, 15.1mm, 15.9mm, 16.3mm, 19.0mm, 19.4mm, 19.8mm, 22.2mm, 22.6mm, 23mm ). Includes Test Report and Cer... | 3 | |
| 98S51605001-228 | ATR REFERENCE STANDARD TA6V(6AL-4V) Titanium PT 6 51-60-00. Calibration Standard for Rotary Probes..Figure 616 (Sheet 1) Page 629, Hole Sizes:( 14.3mm, 14.6mm, 15.1mm, 15.9mm, 16.3mm, 19.0mm, 19.4mm, 19.8mm, 22.2mm, 22.6mm, 23mm ). Includes Test Repor... | 3 | |
| 99A57204435000 | PROBE 5 MHZ 16 ELEMET | 1 | |
| 99D53103000000 | Probeta ultrasonidos (*) | 5 | |
| 99D57103016000 | Probeta | 7 | |
| 99D57204169000 | Probeta | 3 | |
| 99D57204170000 | Probeta | 3 | |
| 99F53303065000 | Probeta | 2 | |
| 99F53303066000 | Probeta | 2 | |
| 99F53303086000 | Probeta | 5 | |
| 99F53303087000 | Probeta | 4 | |
| 99F53303099000 | Probeta ultrasonidos | 3 | |
| 99F53303107000 | Probeta | 1 | |
| 99F53303108000 | Probeta | 1 | |
| 99F53303109000 | Probeta | 1 | |
| 99F54403002001 | Probeta | 5 | |
| 99F54503009000 | Probeta | 2 | |
| 99F57103007000 | Probeta | 3 | |
| 99F57204125000 | Probe Guide A330 57-26-08-PB6 PG 9 FG 57-26-08-991-017-A SHEET 01 | 2 | |
| A 593 S-RM | SHEAR WAVE PROBE -- PANAMETRIC A 593 S-RM , 70 DEGREE, 5 MHZ OR EQUIVALENT | 2 | |
| A-302 | STATIC PRESS. PROBE ETOPS CHECK VAL | 2 | |
| A0M9951359001011 | PKA-27 H-1359 - Probe with good penetrat | 1 | |
| A25312 | PROBE TIP KIT W/4 TIPS, 4 SET SCREWS, 1 WRENCH | 4 | |
| A5014SM | SHEAR WAVE PROBE -- PANAMETRIC A5014SM , 60 DEGREE, 5 MHZ OR EQUIVALENT | 1 | |
| A544S | PROBE SPINDLE PANAMETRIC NDT 10 X 0.25 | 1 | |
| ACL-125 | CUSTOM PROBE COLLAR, .125"Ø THRU HOLE, .500"Ø TIP OD, .750"Ø BODY OD. MATERIAL: BLACK DELRIN(ACETAL). 1823427 | 1 | |
| ACSMF100-.156/1M | MANUAL COUNTER SINK PROBE 100° DEGREES 200KHz - 1MHz WITH A CENTER FREQUENCY OF 500KHz, SHIELDED, WITH MICRODOT CONNECTOR .156"Ø DIAMETER. Includes Test Report and Certificate of Conformance. | 1 | |
| ACSMF100-.187/1M | MANUAL COUNTER SINK PROBE 100° DEGREES 200KHz - 1MHz WITH A CENTER FREQUENCY OF 500KHz, SHIELDED, WITH MICRODOT CONNECTOR .187"Ø DIAMETER. Includes Test Report and Certificate of Conformance. | 1 | |
| ACSMF100-.218/1M | MANUAL COUNTER SINK PROBE 100° DEGREES 200KHz - 1MHz WITH A CENTER FREQUENCY OF 500KHz, SHIELDED, WITH MICRODOT CONNECTOR .187"Ø DIAMETER. Includes Test Report and Certificate of Conformance. | 1 | |
| ACSMF100-.250/1M | MANUAL COUNTER SINK PROBE 100° DEGREES 200KHz - 1MHz WITH A CENTER FREQUENCY OF 500KHz, SHIELDED, WITH MICRODOT CONNECTOR .250"Ø DIAMETER. Includes Test Report and Certificate of Conformance. | 1 | |
| ACSMF100-.250/500K | MANUAL COUNTER SINK PROBE 100° DEGREES 200KHz - 1MHz, SHIELDED, WITH MICRODOT CONNECTOR .250"Ø DIAMETER. Includes Test Report and Certificate of Conformance. | 1 | |
| AD-953-7 | pitot static probe adapter set | 15 | |
| AD953-7 | SET - PITOT-STATIC PROBE ADAPTER | 15 | |
| AD953HT-7 | SET - PITOT-STATIC PROBE ADAPTER | 1 | |
| ADTS-205 | Three-channel Smart Probe /AoA Air Data Test Set | 6 | |
| ADTS-206 | Three-channel Smart Probe /AoA Air Data Test Set | 1 | |
| AF-3007-1.0 | MANUAL BOLT HOLE PROBE DIFFERENTIAL WITH COLLAR 25 KHZ 6.0" LONG, 1.0" (25.4mm) DIAMETER. TRIAX FISCHER FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-3007-1.0/RA | ROTARY BOLT HOLE PROBE RA 2000 SCANNER, 25 KHZ ABSOLUTE REFLECTION. 6.0" LONG, 1.0" (25.4mm) DIAMETER. 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance..... | 1 | |
| AF-3014-.816/RA | ROTARY BOLT HOLE PROBE RA2000 SCANNER 25 KHZ ABSOLUTE REFLECTION 5.25" LONG. .816" (20.7mm) DIAMETER. 4 PIN STEP LEMO CONNECTOR FOR RA SCANNER. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-3014-UX.810 | ADJUSTABLE ROTARY UNIVERSAL ABSOLUTE/REFLECTION PROBE 25 KHZ 5.25" LONG, 0.810" (20.5mm) DIAMETER. 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-3015-.880/RA | ROTARY BOLT HOLE PROBE RA 2000 SCANNER 25 KHZ ABSOLUTE REFLECTION, 5.25" LONG, 0.880" (22.3mm) DIAMETER. 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-3016-.960/RA | ROTARY BOLT HOLE PROBE RA2000 SCANNER, 25 KHZ ABSOLUTE REFLECTION 5.25" LONG, 0.960" (24.3mm) DIAMETER. 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-3016-UX.960 | ADJUSTABLE ROTARY UNIVERSAL ABSOLUTE/REFLECTION PROBE 25 KHZ 5.25" LONG, 0.960" (24.3mm) DIAMETER. 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4012 | LOW FREQUENCY DETACHABLE REFLECTION SPOT PROBE, SHIELDED, .310"Ø OD, 700HZ-80KHZ WITH TOP MOUNTED TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4021 | LOW FREQUENCY DIFFERENTIAL / BRIDGE DETACHABLE SURFACE PROBE 500Hz-40KHz, .440" Ø. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4021/4F | LOW FREQUENCY DIFFERENTIAL / BRIDGE DETACHABLE SURFACE PROBE 500Hz-40KHz, .440" Ø. SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4041 | LOW FREQUENCY DIFFERENTIAL PROBE , 1-40KHZ. Maximum height of .50" inches and diameter of .300" to .320" inches. Flat at the end. Used with ANDT3016-B reference standard. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4041-1 | LOW FREQUENCY DIFFERENTIAL PROBE , 1-40KHZ. Maximum height of .400" inches and diameter of .300"Ø to .320"Ø inches. Flat at the end. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4041/4F | LOW FREQUENCY DIFFERENTIAL PROBE , 1-40KHZ. Maximum height of .50" inches and diameter of .300" to .320" inches, 4 Pin Fischer Connector. Flat at the end. Used with ANDT3016-B reference standard. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4041/4L | LOW FREQUENCY DIFFERENTIAL PROBE , 1-40KHZ. Maximum height of .50" inch and diameter of .300" to .320" inches. Supplied with a 4 pin Lemo connector. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4047 | LOW FREQUENCY REFLECTION SPOT PROBE 1KHz-40KHz, SUPPLIED WITH A TRIAX FISCHER CONNECTOR, .500"Ø DIAMETER Includes Test Report and Certificate of Conformance | 1 | |
| AF-4054/BR | LOW FREQUENCY REFLECTION PROBE, REFLECTION, 1-5KHZ, .186OD, ATTACHED CABLE BURNDY CONNECTOR 6 FEET LONG | 1 | |
| AF-4065 | LOW FREQUENCY REFLECTION RING PROBE, TRIAX FISCHER CONNECTOR, 50-500HZ, .600" INSIDE DIAMETER, 1.550" OUTSIDE DIAMETER. B777-200/300 57-20-01 PART 6 PAGE 2. Includes Test Report and Certificate of Conformance... | 1 | |
| AF-4105/4L | Detachable Surface Spot Probe,bridge, diameter of .310"Ø in. (7.9 mm) and a operating Frequency range of 1 kHz - 50 kHz, Supplied with a 4-pin LEMO Connector Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4105/7L | Detachable Surface Spot Probe,bridge diameter of .310 in. (7.9 mm) and a operating Frequency range of 1 kHz - 50 kHz (equivalent to SPO-1284, SPO-1598), 7-pin LEMO Powerlink Connector. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4105/TF | Surface Probe, Standard Bridge Detachable Surface Probe with a diameter of .31 in. (7.9 mm) and a operating range of 1 kHz - 50 kHz (equivalent to SPO-1284, SPO-1596), Triax Fischer/ LEMO Connector. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4112 | LOW FREQUENCY REFLECTION SPOT PROBE .25"Ø(6.4MM) DIAMETER 2KHz-200KHz,(Olympus NDT) USED WITH NDT781 777 57-40-02 PAGE 1 FIGURE 2. IncludesTest Report and Certificate of Conformance. | 1 | |
| AF-4144 | LOW FREQUENCY DIFFERENTIAL PROBE , 1-40KHZ. Maximum height of .50" inches and diameter of .300" to .320" inches. 10 inches long Flat at the end. Used with ANDT3016-B reference standard. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4167 | LOW FREQUENCY REFLECTION SPOT PROBE .25"(6.4MM) DIAMETER 500Hz-50KHz,(EC/NDT) USED WITH NDT781 777 57-40-02 PAGE 1 FIGURE 2. IncludesTest Report and Certificate of Conformance. | 1 | |
| AF-4175/4L | LOW FREQUENCY REFLECTION SPOT PROBE, 1KHz-100KHz, DELRIN(ACETAL) BODY .440"Ø O.D., 1.77" TALL, SUPPLIED WITH A 4 WAY LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4175/TF | LOW FREQUENCY REFLECTION SPOT PROBE, 300Hz-100KHz, DELRIN(ACETAL) BODY .440"Ø O.D., 1.77" TALL WITH TOP MOUNTED TRIAX FISCHER / LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4185 | REFLECTION SPOT PROBE ACETAL BODY WITH PROTECTIVE WEAR RESISTANT FACE, 200Hz-200KHz, .511"Ø (13.0mm)OD, 1.5" LONG STRAIGHT (TOP MOUNT TRIAX FISCHER CONNECTOR). Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4191 | LOW FREQUENCY SURFACE PROBE, 1-40KHz, DIFFERNTAIL, BENT 20°, .500" DROP. .312" OD, 6.0 OVERALL LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECETOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4193 | LOW FREQUENCY REFLECTION SPOT PROBE. TIP DIAMETER OF.500"Ø(12.7mm), BODY DIAMETER OF (14.80mmØ, ), 1.600 "(41.0mm) HIGH, 1-30KHz, 90° DEGREES (RIGHT ANGLE) TRIAX FISHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4193/4F | LOW FREQUENCY REFLECTION SPOT PROBE. TIP DIAMETER OF.500"Ø(12.7mm), BODY DIAMETER OF (14.80mmØ, ), 1.600 "(41.0mm) HIGH, 1-30KHz, 90° DEGREES (RIGHT ANGLE) 4 PIN FISHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4198 | LOW FREQUENCY REFLECTION SURFACE PROBE 90° .400" DROP BENT, .187" DIAMETER, 5.0" LONG 1-50KHz , SHIELDED, 416 STAINLESS STEEL, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4205 | LOW FREQUENCY REFLECTION RING PROBE, 50HZ-3KHZ, ID 0.500"(12.7mm)Ø, OD 0.690" (17.5mm)Ø. OVERALL HEIGHT = 1.56"(39.5mm) x OVERALL DIAMETER = .787"(20mm) Ø, WITH A TRIAX FISCHER CONNECTOR.Supplie with probe guide Figure 6 27-1-6023. Includes Test Report | 1 | |
| AF-4228/4F | Rigid Surface probe, Absolute Reflection, 90° Degrees, Shielded, .125"Ø tubing with a 4mm(.156") diameter tip, .300" Drop with a 70mm(2.75") Shaft Length and 3.0" Long Handle for a total Length of 5.75" Long Supplied with a 4 Pin Fischer Connector. Freque | 1 | |
| AF-4230/4F | Rigid Surface probe, Absolute Reflection, 90° Degrees, Shielded, .125"Ø tubing with a 4mm(.156") diameter tip, 15mm( .475") Drop with a 79.5mm(3.12") Shaft Length Bent 20° 50.74mm(1.97") from the handle, 3.0" Long Handle for a total Length of 6.12" Long. | 1 | |
| AF-4237 | Detachable Surface Spot Probe, Reflection, diameter = .620"Ø in. (15.7 mm) and a operating frequency range of 100Hz -20kHz (equivalent to APG/16/S. SPO-2134), Supplied with a Triax Fischer/LEMO push/pull Connector. Includes Test Report and Certificate of | 1 | |
| AF-4295 | REFLECTION SUB SURFACE SPOT PROBE, ACETAL BODY, 300Hz-100KHz, .630"Ø (16.0mm)OD, 1.5" LONG, SUPPLIED WITH A STRAIGHT (TOP) MOUNT 4-WAY LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4316 | LOW FREQUENCY BRIDGE/DIFFERENTIAL SPOT PROBE, .500"Ø DIAMETER TOP MOUNT TRIAX FISCHER CONNECTOR 5-50KHz, .440"Ø coil OD. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4317 | LOW FREQUENCY BRIDGE/DIFFERENTIAL SPOT PROBE, .625"Ø DIAMETER TOP MOUNT TRIAX FISCHER CONNECTOR 400HZ - 30KHz, .50"Ø coil OD. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4318 | LOW FREQUENCY BRIDGE/DIFFERENTIAL SPOT PROBE, .875"Ø DIAMETER TOP MOUNT TRIAX FISCHER CONNECTOR 100HZ - 2 KHz, .750"Ø coil OD. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4327 | CUSTOM ZETEC CONDUCTIVITY REFLECTION SPOT PROBE. 0.157 IN. (4MM) TIP. 3-100KHz WITH CENTER FREQUENCY 60KHZ. SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4330 | Low Frequency Spot probe with a diameter of 0.25inches (6.35) and a operating frequency range of 100kHz - 500kHz. Bridge coil configuration, triax Fischer/LEMO Connector. Includes Test Report and Certificate of Conformance. Model:S/100KHZ-500KHZ/.25 | 1 | |
| AF-5024 | RIGID SURFACE PROBE ABSOLUTE SHIELDED 1-3MHZ, 90°, .50" DROP BENT 30° 1.0" FROM THE TIP, 0.125" DIAMETER SHAFT, 7.0 " LONG WITH MICRODOT CONNECTOR. Includes Test Report ancd Certificate of Conformance. | 1 | |
| AF-5036G1 | PROBE GUIDE Material: Delrin. Diameter 0.430 ±0.025 (10.92mm ±0.064). Used in Boeing procedure 57-53-03 Part 6. Includes Certificate of Conformance. | 1 | |
| AF-5036G2 | PROBE GUIDE Material: Delrin. Diameter 0.515 ±0.025 (13.08mm ±0.064). Used in Boeing procedure 57-53-03 Part 6. Includes Certificate of Conformance. | 1 | |
| AF-5090 | LF PROBE BUCKED TAIL DIFF 2 -7KHZ 2 FT CABLE ATTACHED TRIAX FISCHER CONNECTOR WITH HANDLE( CLINCHED RIVET PROBE) | 1 | |
| AF-5112/7L | Detachable Pencil Probe 100-500KHz Unshielded with 7 pin Lemo connector. Tip diameter .187" with adjustable collar. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5129 | RIGID SURFACE PROBE .118"Ø DIAMETER TUBING, 20° DEGREES, 1.0" DROP 500KHz-1MHz WITH TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5136 | SURFACE PROBE 90° 2" FROM THE HANDLE 1" AFTER THE 90°, .250 DROP .125" DIAMETER TIP, 100KHZ - 3 MHZ, 4.50" LONG TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5141/TF | CUSTOM EDDY CURRENT PENCIL PROBE(DELRIN - BLACK ACETAL), STRAIGHT SHAFT WITH THE COIL CENTERED AT THE TIP .250"Ø, 50-500KHz UNSHIELDED WITH TRIAX FISCHER CONNECTOR, 3.0: LONG. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5142 | Rigid Surface Probe Abs Unhielded, 200KHz Center Frequency, 50-500KHz operating range, .187"Ø Handle with .093"Ø Straight Shaft Metal 2.5" With Delrin Tip, 4.5" Total Length with Microdot Connector. Includes Test Report and Certificate of Conformance. ... | 1 | |
| AF-5150 | CUSTOM BOLT PROBE FOR A286 STEEL, HEAD-TO-SHANK "FILLET" INSPECTION. FREQUENCY 500KHz-1MHz. | 1 | |
| AF-5154 | LOW FREQUENCY SURFACE PROBE. DIFFERENTIAL. .375 DROP. .312 TIP DIAMETER. 6.0" LONG. 1-20KHZ. TRIAX FISCHER CONNECTOR. Includes test report. ....CONDUCTIVITY REFLECTION PROBE. RIGHT ANGLE. 200HZ-100KHZ. CENTER FREQUENCY 60KHZ. TRIAX FISCHER CONNECTOR.... | 1 | |
| AF-5155 | LOW FREQUENCY SURFACE PROBE. REFLECTION. .500 DROP. .312 TIP DIAMETER. 6.0" LONG. 1-20KHZ. TRIAX FISCHER CONNECTOR. Includes test report. ....CONDUCTIVITY REFLECTION PROBE. RIGHT ANGLE. 200HZ-100KHZ. CENTER FREQUENCY 60KHZ. TRIAX FISCHER CONNECTOR. I... | 1 | |
| AF-5156 | RIGHT ANGLE CONDUCTIVITY PROBE. CENTER FREQUENCY 60 KHZ. 200HZ-100KHZ FREQUENCY. TRIAX FISCHER CONNECTOR. .420 DIAMETER. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5173/2.25mm | Custom eddy current encircling probe for 2.25mm tube (outer diameter), inner diameter of coil housing 2.5mm, 50kHz – 500kHz, bridge differential, triax connector, include test report and certificate of conformance. | 1 | |
| AF-5173/4MM | Custom Eddy Current Encirling Probe, 4mm tube (outer diameter), 50KHz-500kHz, bridge differential, Supplied with a Triax Fischer Connector. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5173/7.5mm | Custom eddy current encircling probe for 7.25mm tube (outer diameter), inner diameter of coil housing 7.5mm, 50kHz – 500kHz, bridge differential, triax connector, include test report and certificate of conformance. | 1 | |
| AF-5175/.093 | SURFACE PROBE: 0.093 INCH (2,36 MM) DIAMETER, 200 KHZ, ABS | 1 | |
| AF-5180/.750 | Rotary Hole Probe 0.750 inch (19.0 mm) to 0.812 inch (20.6 mm) diameter, Self Expanding 10 inch (254 mm) working length, Differential, Operating frequency 100 kHz - 2MHz 4 pin MIZ connector, Includes Test Report and Certificate of Conformance | 1 | |
| AF-5184 | HOCKING LOCATOR SURFACE PROBE, FE / NFE, 0.187"Ø TIP DIAMETER, .500" DROP, BENT, 200KHz, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5212/7L | Detachable Pencil Probe 100-500KHz Shielded with 7 pin Lemo connector. Tip diameter .187" with adjustable collar. | 1 | |
| AF-5213/7L | Detachable Pencil Probe 500KHz-3MHz Unshielded Reflection, with 7 pin Lemo connector. Tip diameter .187" with adjustable collar. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5214/7L | Detachable Pencil Probe 500KHz-1MHz Absolute Shielded, with 7 pin Lemo connector. Tip diameter .187" with adjustable collar. IncludesTest Report and Certificate of conformance. | 1 | |
| AF-5221 | CUSTOM HIGH FREQUENCY EDDY CURRENT PROBE FOR EDGE DEFECT DETECTION FOR THE KC10 ARB SUPPORT FITTING. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5227-1 | CUSTOM BOBBIN PROBE, 100-500KHz, DIFFERENTIAL, .425"Ø 1.6" LONG WITH A 1 METER LONG HARDWIRED CABLE ATTACHED TO A TRIAX FISCHER CONNECTOR. Used to inspect brass tubing I.D.. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5233 | CUSTOM FLEXIBLE BLADE PROBE 90° DEGREES, .045" THICK 6.0" LONG SUPPLIED WITH A MICRODOT CONNECTOR, 50-500KHZ Includes Test Report and Certificate of Conformance. REFERENCE: Canadair 215/215T ATA 53-10, 57-30 Service Bulletin 215-A558 | 1 | |
| AF-5243 | SURFACE PROBE WITH .050" DIAMETER TUBING. 35 DEGREES .500" DROP SHAFT 5.0" LONG TRIAX FISCHER CONNECTOR. .5” TIP. 50-500KHz. Includes Test Report and Certificate of Conformance | 1 | |
| AF-5257 | 90 DEGREE LOW FREQUENCY SURFACE PROBE, REFLECTION, .250" DIAMETER TIP .750" DROP 6.5" LONG 1-20KHz TRIAX FISCHER CONNECTOR Includes Test Report and Certificate of Conformance | 1 | |
| AF-5257G | PROBE GUIDE Material: Lucite. Diameter 1.50" ±0.02 . Used in Boeing procedure 55-10-27 Part 6. Includes Test Report and Certificate of Conformance | 1 | |
| AF-5258 | LOW FREQUENCY BOLT HOLE PROBE, Absolute Shielded. 13KHZ, 0.625" Diameter, 2.0" Working Length WITH COLLAR TRIAX FISCHER CONNECTOR Includes Test Report and Certificate of Conformance | 1 | |
| AF-5273 | RIGID STRAIGHT SURFACE PROBE, ABS SHIELDED, .125"Ø , .100"Ø COIL DIAMETER, 1-3MHz WITH A 2MHz CENTER FREQUENCY, ,700"( 17.788mm ) DROP, 90° JOGGLE, SUPPLIED WITH A TRIAX FISCHER CONNECTOR, 4.0" (101.6mm) LONG. Includes Test Report and Certificate of Confo | 1 | |
| AF-5274 | RIGID STRAIGHT SURFACE PROBE, ABS SHIELDED, .125"Ø , .100"Ø COIL DIAMETER, 1-3MHz WITH A 2MHz CENTER FREQUENCY, ,700"( 17.788mm ) DROP, 30° JOGGLE, SUPPLIED WITH A TRIAX FISCHER CONNECTOR, 12.0" (304.8mm) LONG. Includes Test Report and Certificate of Conf | 1 | |
| AF-5277 | Absolute Unshielded Broad Band Pencil Probe with a center frequency of 2MHz and a Frequency Range of 500KHz-4MHz. Supplied with a BNC Socket Connector | 1 | |
| AF-5278/TF | HIGH FREQUENCY SURFACE PROBE, Twin Coil Differential 50-500KHZ. 4.0" Long 0.375" Diameter with Triax Fischer connector. For use with Boeing Reference Standard 497 767 Part 6 53-00-04. IncludesTest Report and Certificate of conformance. | 1 | |
| AF-5279 | Low Frequency Pencil Probe, Shielded 100KHz-500KHz, 90°, .100" Drop, .150"Ø Tubing diameter, 12.0" Long with a 4.0" Long handle supplied with a Triax Fischer / Lemo Connector. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5292 | ABSOLUTE SHIELDED STRAIGHT PENCIL PROBE, .25"Ø (6.35mm)Ø with a Tip diameter of .180"Ø attached to a 6 foot cable with adjustable collar. Nortec 8 pin Burndy connector 2-4MHz.. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5293 | ABSOLUTE UNSHIELDED STRAIGHT PENCIL PROBE, .25"Ø (6.35mm)Ø with a Tip diameter of .180"Ø attached to a 6 foot cable with adjustable collar. Nortec 8 pin Burndy connector 500KHz-1MHz.. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5336/2MHZ-1 | Fixed Diameter Solid Rotating Scanner Probe, Differential Reflection coil Configuration,1/8"Ø, 1-3MHz with a 2MHz Center Frequency, Unshielded, 1.75" Working Length Supplied with a 4 Pin Fischer Connector. Includes Test Report and Certificate of Conforman | 1 | |
| AF-5347 | Low Frequency Reflection Eddy Current Probe, 1-20 khz, 90°, 5/16"(.312") Diameter Tip, .500" Drop, 6" Long Supplied with a Triax Fischer Triaxial Connector. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5442 | SOLID ROTATING SCANNER PROBE 3.0"Ø DIAMETER,100KHz-2MHz , 2.0" WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5444 | Custom Eddy Current Detachable Pencil Probe Supplied with Plexiglass Collar, Absolute Bridge Unshielded, 100KHz-500KHz, Supplied with a Triax Fischer Connector. Includes Test Report and Certificate of conformance...P/100KHZ-500KHZ/AU | 1 | |
| AF-5445 | Custom Eddy Current Detachable Pencil Probe Supplied with Plexiglass Collar, Absolute Bridge Unshielded, 500KHz-1MHz, Supplied with a Triax Fischer Connector. Includes Test Report and Certificate of conformance...P/500KHZ-1MHZ/AU | 1 | |
| AF-5446 | Custom Eddy Current Detachable Pencil Probe Supplied with Plexiglass Collar, Differential Shielded, 4-6Mhz, Supplied with a Triax Fischer Connector. Includes Test Report and Certificate of conformance...P/100KHZ-500KHZ/AU | 1 | |
| AF-5448 | Custom Eddy Current Detachable Pencil Probe Supplied with Plexiglass Collar, Differential Shielded, 50KHz-100KHz, Supplied with a Triax Fischer Connector. Includes Test Report and Certificate of conformance. P/50KHZ-100KHZ/AU | 1 | |
| AF-5451 | Custom Eddy Current Detachable Pencil Probe Supplied with Plexiglass Collar, Reflection Unshielded, 100KHz-1MHz, Supplied with a Triax Fischer Connector. Includes Test Report and Certificate of conformance.....PR/100KHZ-1MHZ/AU | 1 | |
| AF-5452 | Custom Eddy Current Detachable Pencil Probe Supplied with Plexiglass Collar, Reflection Unshielded, 1MHz-3MHz, Supplied with a Triax Fischer Connector. Includes Test Report and Certificate of conformance.....PR/1MHZ-3MHZ/AU | 1 | |
| AF-5453 | Surface Probe, 90° right angle, 50-500 kHz frequency, NFe/Fe, absolute, shielded, 0.063 in (1.6mm) diameter Tip, 0.787 in (20.0 mm) drop, 4.500 in (114.30 mm) length with a 50mm working length supplied with a microdot connector. Includes Test Report a... | 1 | |
| AF-5454 | Boeing Custom Flexible Shaft Eddy Current Detachable surface Probe, Bent, Differential, 50-KHz-500KHz, Probe Body .200" Wide, .125" Radius with a Slight Rear Drop for Edge Support Positioning. 3.0" Working Length Supplied with a Triax Fischer / Lemo ... | 1 | |
| AF-5457 | Custom Eddy Current Detachable Pencil Probe Supplied with Plexiglass Collar, Absolute Shielded, 100KHz-500KHz, Supplied with a Microdot Connector. Includes Test Report and Certificate of conformance. | 1 | |
| AF-6020 SPACER SET | SET OF SPACERS AND SCREWS FOR USE WITH AF-6020 PROBE. TWO EACH OF 0.010, 0.025, 0.050, 0.100 WIDTH SPACERS AND 6 SCREWS. | 1 | |
| AF-6025-10&4 | SLIDING PROBE WITH 10:00 NOTCH TANGENT COIL ARRANGEMENT TO DETECT 45° TANGENTIAL CRACKS, REFLECTION, 1KHz-100KHz, WITH TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformation. | 1 | |
| AF-6026-2&7 | SLIDING PROBE WITH 2:00 NOTCH TANGENT COIL ARRANGEMENT TO DETECT 45° TANGENTIAL CRACKS, REFLECTION, 1KHz-100KHz, WITH TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformation. | 1 | |
| AF-6027-3&9 | SLIDING PROBE WITH 3:00 NOTCH TANGENT COIL ARRANGEMENT TO DETECT 45° TANGENTIAL CRACKS, REFLECTION, 1KHz-100KHz, WITH TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformation. | 1 | |
| AF-8001/BNC | PRATT & WHITTNEY ENGINE BLADE PROBE, DIFFERENTIAL 1-4 MHz, ATTACHED CABLE 6.0' FEET LONG WITH A BNC CONNECTOR FOR ROHMANN M2/M3 SERIES INSTRUMENTS, NO BALANCE LOAD,PARAMETRIC OPERATION. DIFFERENTIAL 1-4 MHz. Includes Test Report and Certificate of C... | 1 | |
| AF-SC.125 | Shoulder collar 0.125" diameter with set screw. For probe stabilization. .. | 1 | |
| AFK-AUR12SS-1 | Open Hole Eddy Current Probe Kit, total of 12 stainless steel rotary probes with a shaft length of 70mm long supplied with a universal 4 pin Fischer connector. Probe Diameters: 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2. Suppli | 1 | |
| AH145-702 | PITOT & PROBE COVERS (set of 4) | 1 | |
| AJ65B91267 | TOOL - JIG, PT2 PROBE ASSEMBLY, JT9D ENGINE INLET | 1 | |
| AMH.562SE | Manual hole probe, Split-end, Expandable from 0.562 inch (14.27mm) diameter to .625 inch (15.9mm) with a 2.0 inch (5.08cm) working length, frequency 50kHz -500kHz, microdot connector, bridge absolute coil configuration. Includes Test Report and Certificic | 1 | |
| AMHF-.156/.5WL | Manual hole probe, ferrite shielded, 0.156 inch (3.96mm) diameter and .500" inch (27.9mm) working length, frequency 50kHz -500kHz, microdot connector, bridge absolute coil configuration. Includes Test Report and Certificate of Conformance. | 1 | |
| AMHF-.187/.5WL | Manual hole probe, ferrite shielded, 0.187 inch (4.76mm) diameter and .500" inch (27.9mm) working length, frequency 50kHz -500kHz, microdot connector, bridge absolute coil configuration. Includes Test Report and Certificate of Conformance. | 1 | |
| AMHF-.187/2.4WL | Manual hole probe, ferrite shielded, 0.187 inch (4.75mm) diameter and 2.5 inch (61.0mm) working length, frequency 50kHz -500kHz, microdot connector, bridge absolute coil configuration. Includes Test Report and Certificate of Conformance. | 1 | |
| AMHF-.187/200K-1M | Manual hole probe, ferrite shielded, 0.187 inch (4.76mm) diameter and 1.1 inch (27.9mm) working length, frequency 200kHz -1MHz, microdot connector, bridge absolute coil configuration. Includes Test Report and Certificate of Conformance. | 1 | |
| AMHF-.218 | Manual hole probe, ferrite shielded, 0.218 inch (5.5mm) diameter and 1.1 inch (27.9mm) working length, frequency 50kHz -500kHz, microdot connector, bridge absolute coil configuration. Includes Test Report and Certificate of Conformance. | 1 | |
| AMHF-.250/200K-1M | Manual hole probe, ferrite shielded, 0.250 inch (6.35mm) diameter and 1.1 inch (27.9mm) working length, frequency 200kHz -1MHz, microdot connector, bridge absolute coil configuration. Includes Test Report and Certificate of Conformance. | 1 | |
| AMHF-.375/.75WL | Manual hole probe, ferrite shielded, 0.375 inch (9.52mm) diameter and .750" inch (50.8mm) working length, frequency 50kHz -500kHz, microdot connector, bridge absolute coil configuration. Includes Test Report and Certificate of Conformance. | 1 | |
| AMHR.750 | Manual hole probe, 0.750 inch (19.05mm) diameter and 2.0 inch (50.8mm) working length, frequency 50kHz -500kHz, microdot connector, reflection coil configuration. Includes Test Report and Certificate of Conformance. | 1 | |
| AP2D-DC | ADAPTER, LOCATOR TO DEFECTOMETER PROBE 2MHZ | 1 | |
| AP925-4.5 | SURFACE PROBE ABSOLUTE, 90° 50-500KHZ CENTER FREQUENCY 200KHz. .187" TIP DIAMETER, 6.4mm(.25")TIP LENGTH, OVERALL PROBE LENGTH 114mm(4.5") Fe/NFe. MICRODOT CONNECTOR | 1 | |
| AP95-5B/30-50KHZ | Surface Probe- Right angle bent, 5.0" inches overall length with 0.5" inch drop and 0.25" inch diameter tip. Operating frequency 1KHz -30KKHz, Triax Fischer/Lemo triax connector, bridge differential coil configuration | 1 | |
| APN-45-5/L 500K | RIGID SURFACE PROBE SHIELDED, .125"Ø TIP DIAMETER, .500" DROP, CRANKED 45° DEGREES, 5.0" LONG WITH MICRODOT CONNECTOR. (LOCATOR 500KHZ ,47UH). Includes Test Report and Certificate of Conformance. | 1 | |
| APN-475-4.5/L500K | Surface Probe, 45 degrees, 500kHz frequency, Fe/NFe, absolute, shielded, 0.13 in (3.30 mm) diameter, 4.50 in (114.30 mm) length, 0.75 in (19.05 mm).Includes Test Report and Certificate of Conformance. | 1 | |
| APN-5FX/200K-1MHZ | Flexible Surface Pencil Probe, absolute shielded, frequency: 200KHz-1MHz with the center frequency 500KHz. Measurement head diameter tubing 0.125"Ø inch (3.18mm). Total length: 5 inches (12.7cm). L00 cable connection. | 1 | |
| APN-5FX/2M | Flexible Surface Pencil Probe, absolute shielded, frequency: 1-3MHz with the center frequency 2MHz. Measurement head diameter tubing 0.125"Ø inch (3.18mm). Total length: 5 inches (12.7cm) supplied with a.microdot connector. Includes Test Report and Ce... | 1 | |
| APN-903-6/500K/7L | Absolute Shielded / Bridge Pencil Probe. , 200 kHz - 1 MHz with a center frequency of 500 kHz, Right Angle Shaft, 0.03 in. (0.76 mm) drop with a 0.125 in. diameter tip. 6 in. overall length supplied with a 7 Pin Fischer/LEMO "PowerLink" connector. Includ | 1 | |
| APN-95-5B/200K-1M | Detachable pencil probe, bent, Absolute shielded . Operates on a 200KHz-1MHz frequency range and has a center frequency of 500KHz. Right angle shaft with a 0.50 inch (12.7mm) drop and a total length of 5 inches (12.7cm) Supplied with a microdot connec... | 1 | |
| APN-95-6/7L | Bridge Absolute Shielded Metal Detachable Pencil Probe. 7 Pin Fischer/LEMO "PowerLink", Operates on a 50 kHz - 500 kHz and has a center frequency of 200 kHz, Right Angle Shaft, 0.50 in. (12.7 mm) drop with a 0.125 in. diameter tip. 6 in. overall length. I | 1 | |
| APN-975-4.5/L500K | Surface Probe, 90° right angle, 500 kHz frequency, NFe/Fe, absolute, shielded, 0.130 in (3.30 mm) diameter, 4.500 in (114.30 mm) length, 0.750 in (19.05 mm) tip length 500KHz. Includes Test Report and Certificate of Conformance. | 1 | |
| APQ925-6B/1-20K | LOW FREQUENCY SURFACE PROBE 90° DIFFERENTIAL, .250" DROP .25" DIAMETER, BENT, 1-20KHz 6.0" LONG | 1 | |
| APQ95-5B/1-30K | LOW FREQUENCY SURFACE PROBE 90° DIFFERENTIAL, .500" DROP .25" DIAMETER, BENT, 1-30KHz 5.0" LONG | 1 | |
| APQ95-6/1-20K | LOW FREQUENCY SURFACE PROBE 90° DIFFERENTIAL, .500" DROP .25"Ø DIAMETER, 1-20KHz 6.0" LONG SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| ARH22-Z21 | ADAPTER ZETEC MIZ10 REFL. PROBE TO PHASEC 2 | 1 | |
| ARP- 1.40- .85- 200H | REFLECTION RING PROBE, OUTER DIAMETER 1.40, INNER DIAMETER .85, MAX HEIGHT 1.75, CENTER FREQ 200HZ 100-500HZ | 1 | |
| ARP-.250/1.1-500HZ-5K | Handheld Detachable Probe w/o Cable; Model: RNG = Detachable Ring Probe with Reflection (Driver Pick-up Coils) ; Item Diameter: 0.250in (6.4mm); Tube ID: ; Coil: #= Special; Poly Type: None; Length: No cable; Connector: 1 Pin Female Triaxial Connecto... | 1 | |
| ARP-.330-.750 | LOW FREQUENCY RING PROBE, REFLECTION, 1-10KHZ TRIAX FISCHER CONNECTOR, .330" INSIDE DIAMETER, .750" OUTSIDE DIAMETER. B777-200/300 PART 6 57-20-03 PAGE 1. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-1.40-.85-200H | REFLECTION RING PROBE, OUTER DIAMETER 1.40, INNER DIAMETER .85, MAX HEIGHT 1.75, CENTER FREQ 200HZ 100-500HZ | 1 | |
| ARR-.187SS/2.0WL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN STEP LEMO CONNECTOR..HEAD DIAMETER: .187"(4.75mm), 2.0"(51mm) WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| ARR-.250SS/2.0WL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN STEP LEMO CONNECTOR. HEAD DIAMETER: .250"(7.14mm), 2.0"(51mm) WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| ARR-.450SE/2.0WL | ROTARY PROBE FOR RA2000 SCANNER 100KHz-2MHz 4 PIN STEP LEMO, .450"Ø OD, 2.0" WORKING LENGTH. Includes Teset Report and Certificate of Conformance. | 1 | |
| ARR-.562/12.5WL | ROTARY PROBE 4 PIN STEP LEMO (STAVELY MINI MITE) 0.562" DIAMETER, 12.5" WORKING LENGTH 100KHZ-2MHZ Includes Test Report and Certificate of Conformance | 1 | |
| ARR-.562/6.5WL | ROTARY PROBE 4 PIN STEP LEMO (STAVELY MINI MITE) 0.562" DIAMETER, 6.5" WORKING LENGTH 100KHZ-2MHZ Includes Test Report and Certificate of Conformance | 1 | |
| ARR-1.0/10.5WL | ROTARY PROBE 4 PIN STEP LEMO (STAVELY MINI MITE) 1.00" DIAMETER, 10.5" WORKING LENGTH 100KHZ-2MHZ Includes Test Report and Certificate of Conformance | 1 | |
| ARR-1.0SE/2.0WL | Universal Rotary Hole Probe 1.0 inch (25.40 mm) to 1.0625 inch (26.98 mm) diameter, Self Expanding 2 inch (50 mm) working length, Operating frequency 200 kHz - 3 MHz, supplied with a 4 pin step Lemo connector, reflection differential coil configuration ( | 1 | |
| ARR-1.200SE/2.0WL | Universal Rotary Hole Probe 1.200 inch (30.48 mm) to 1.262 inch (32.05 mm) diameter, Self Expanding 2 inch (50 mm) working length, Operating frequency 100 kHz - 2MHz 4-pin step lemo connector, RA SCANNER reflection differential coil configuration (1.250-1 | 1 | |
| ARR-1.343SE/2WL | Universal Rotary Hole Probe 1.343 inch to 1.375 inch diameter, Self Expanding 2 inch (50 mm) working length, Operating frequency 100 kHz - 2MHz, supplied with a 4 pin step lemo connector. Includes Test Report and Certificate of Conformance | 1 | |
| ARR-1.375SE/2WL | Universal Rotary Hole Probe 1.375 inch to 1.4375 inch diameter, Self Expanding 2 inch (50 mm) working length, Operating frequency 100 kHz - 2MHz, supplied with a 4 pin step lemo connector. Includes Test Report and Certificate of Conformance. | 1 | |
| ARR-1.4375SE/2WL | Universal Rotary Hole Probe 1.4375 inch to 1.50 inch diameter, Self Expanding 2 inch (50 mm) working length, Operating frequency 100 kHz - 2MHz, supplied with a 4 pin step lemo connector. Includes Test Report and Certificate of Conformance. | 1 | |
| ARR-1.50/10.5WL | ROTARY PROBE 4 PIN STEP LEMO (STAVELY MINI MITE) 1.50" DIAMETER, 10.5" WORKING LENGTH 100KHZ-2MHZ Includes Test Report and Certificate of Conformance | 1 | |
| ARR.125SS | RECHII SCANNER PROBE, STAINLESS STEEL .125" (1/8") DIAMETER, 1.1" WL 100KHZ - 2MHZ | 1 | |
| ARR.150 | RECHII FIXED DIAMETER ROTARY PROBE, .150"Ø FOR RA2000 SERIES SCANNER, 100KHz-2MHz, SUPPLIED WITH A 4 PIN STEP LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARR.156SS | RECHII SCANNER PROBE, STAINLESS STEEL .156" (5/32") DIAMETER, 1.1" WL 100KHZ - 2MHZ | 1 | |
| ARR.160 | RECHII FIXED DIAMETER ROTARY PROBE, .160"Ø FOR RA2000 SERIES SCANNER, 100KHz-2MHz, SUPPLIED WITH A 4 PIN STEP LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARR.170 | RECHII FIXED DIAMETER ROTARY PROBE, .170"Ø FOR RA2000 SERIES SCANNER, 100KHz-2MHz, SUPPLIED WITH A 4 PIN STEP LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARR.180 | RECHII FIXED DIAMETER ROTARY PROBE, .180"Ø FOR RA2000 SERIES SCANNER, 100KHz-2MHz, SUPPLIED WITH A 4 PIN STEP LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARR.187SS | RECHII SCANNER PROBE, STAINLESS STEEL .187" (3/16") DIAMETER, 1.1" WL 100KHZ - 2MHZ | 1 | |
| ARR.250SS | RECHII SCANNER PROBE, STAINLESS STEEL .250" (1/4") DIAMETER, 1.1" WL 100KHZ - 2MHZ | 1 | |
| ARTPX-008 | Type: Rotating Probe Head - Straight Section; Model: ARTPX = Adjustable Rotating Probe for Mini Scanners, Reflection D coils (Driver Pick-up), X Type; Item Diameter: 0.375in (10mm); Tube ID: 0.375-0.437in (9.53-11.1mm); Coil: 1000= 100-2000 kHz; Poly ... | 1 | |
| ARTPX-029 | Type: Rotating Probe Head - Straight Section; Model: ARTPX = Adjustable Rotating Probe for Mini Scanners, Reflection D coils (Driver Pick-up), X Type; Item Diameter: 0.750in (19mm); Tube ID: 0.750-0.875in (19.05-22.23mm); Coil: 1000= 100-2000 kHz; Pol... | 1 | |
| ARTPX-030 | Type: Rotating Probe Head - Straight Section; Model: ARTPX = Adjustable Rotating Probe for Mini Scanners, Reflection D coils (Driver Pick-up), X Type; Item Diameter: 0.875in (22mm); Tube ID: 0.875-1.000in (22.23-25.4mm); Coil: 1000= 100-2000 kHz; Poly... | 1 | |
| ASDP-.25/7L | DETACHABLE STANDARD REFLECTION SPOT PROBE. 0.25 IN. (6.3MM) DIAMETER. 5kHZ-100KHZ. 7-Pin LEMO POWERLINK CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.31/7L | STANDARD REFLECTION SPOT PROBE. 0.31 IN. (7.9MM) DIAMETER. 700HZ-80KHZ. 7-Pin LEMO POWERLINK CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.31/TF | STANDARD REFLECTION SPOT PROBE(STRAIGHT). 0.31"Ø (7.9MM) DIAMETER. 1KHz-50KHz. SUPPLIED WITH A TRIAX FISCHER / LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.312/1-20K | REFLECTION SPOT PROBE .312"Ø(7.85mm) TIP DIAMETER, .425"Ø(10.8mm) BODY DIAMETER. 1KHz-20KHz WITH TOP MOUNTED TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.312/2K | LOW FREQUENCY REFLECTION SPOT PROBE .312"Ø(7.85mm) TIP DIAMETER, 800Hz-20KHz WITH SIDE MOUNTED TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.312/50-500KHZ | HIGH FREQUENCY SPOT PROBE. REFLECTION .312" OD DIAMETER. 50K-500KHz, .200"Ø coil OD. TRIAX FISCHER CONNECTOR. Includes Certificate of Conformance and Test Report. | 1 | |
| ASDP-.312/500KHZ-1MHZ | HIGH FREQUENCY SPOT PROBE. REFLECTION .312" OD DIAMETER. 500KHz-1MHz, .200"Ø coil OD TRIAX FISCHER CONNECTOR. Includes Certificate of Conformance and Test Report. | 1 | |
| ASDP-.4-50H/4L | LOW FREQUENCY REFLECTION SPOT PROBE, .40"Ø DIAMETER SIDE MOUNT 4 PIN LEMO CONNECTOR 50Hz-2KHz. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.44/7L | STANDARD REFLECTION SPOT PROBE. 0.44 IN. (11.2MM) DIAMETER. 400HZ-60KHZ. 7-Pin LEMO POWERLINK CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.45/1KHZ | SURFACE SPOT PROBE, STANDARD BRIDGE .45"Ø DIAMETER TOP MOUNT TRIAX FISCHER CONNECTOR 1KHZ -5KHZ. Includes Test Report and Certificate of conformance. | 1 | |
| ASDP-.470 | LOW FREQUENCY REFLECTION SPOT PROBE, .470"Ø DIAMETER SIDE MOUNT TRIAX FISCHER CONNECTOR 500Hz-30KHz. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.5/1-12KHz | REFLECTION SPOT PROBE ACETAL BODY .500"Ø (13mm)OD, 1.8" LONG STRAIGHT (TOP MOUNT TRIAX FISCHER CONNECTOR) 1-12KHz. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.5/1.5-40KHZ | ABSOLUTE SPOT PROBE ACETAL BODY .500" (13mm)OD, 1.5" LONG STRAIGHT (TOP MOUNT TRIAX FISCHER 1.5-40KHZ | 1 | |
| ASDP-.5/10-40KHz | REFLECTION SPOT PROBE ACETAL BODY .500"Ø (13mm)OD, 1.8" LONG STRAIGHT (TOP MOUNT TRIAX FISCHER CONNECTOR) 10-40KHz. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.5/100HZ-300HZ | ABSOLUTE SPOT PROBE ACETAL BODY .500" (13mm)OD, 1.5" LONG STRAIGHT (TOP MOUNT TRIAX FISCHER 100Hz-300Hz | 1 | |
| ASDP-.5/400HZ-30K | SURFACE SPOT PROBE, STANDARD BRIDGE .500"Ø DIAMETER TOP MOUNT TRIAX FISCHER CONNECTOR 400Hz-30KHz. Includes Test Report and Certificate of conformance. 9213548 | 1 | |
| ASDP-.5/4F | REFLECTION SPOT PROBE ACETAL BODY, 200Hz-200KHz, .511"Ø (13.0mm)OD, 1.5" LONG STRAIGHT (TOP MOUNT 4 PIN FISCHER CONNECTOR). Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.5/4L | REFLECTION SPOT PROBE ACETAL BODY, 200Hz-200KHz, .511"Ø (13.0mm)OD, 1.5" LONG STRAIGHT (TOP MOUNT 4 PIN LEMO CONNECTOR). Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.5/500HZ-50K | REFLECTION SPOT PROBE ACETAL BODY, SHIELDED, 500Hz-50KHz, .500"Ø (12.7mm)OD, 1.8" LONG STRAIGHT (TOP MOUNT TRIAX FISCHER CONNECTOR). Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.5/500HZ-50K/4F | REFLECTION SPOT PROBE ACETAL BODY, SHIELDED, 500Hz-50KHz, .500"Ø (12.7mm)OD, 1.8" LONG STRAIGHT (TOP MOUNT 4 PIN FISCHER CONNECTOR). Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.5/50KHZ-4MHZ | ABSOLUTE SPOT PROBE ACETAL BODY .500" (13mm)OD, 1.5" LONG STRAIGHT (TOP MOUNT TRIAX FISCHER 50KHZ-4MHZ | 1 | |
| ASDP-.5/7L | STANDARD REFLECTION SPOT PROBE. 0.50 IN. (12.7MM) DIAMETER. 300HZ-40KHZ. 7-Pin LEMO POWERLINK CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.5/TF | REFLECTION SPOT PROBE ACETAL BODY, 200Hz-200KHz, .511"Ø (13.0mm)OD, 1.5" LONG STRAIGHT (TOP MOUNT TRIAX FISCHER CONNECTOR). Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.500/100HZ-1KHZ | LOW FREQUENCY REFLECTION SPOT PROBE, .500"Ø DIAMETER TOP MOUNT TRIAX FISCHER CONNECTOR, 100Hz-1KHz, .440"Ø coil OD. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.500/5-50Khz | LOW FREQUENCY REFLECTION SPOT PROBE, .500"Ø DIAMETER TOP MOUNT TRIAX FISCHER CONNECTOR 5-50KHz, .440"Ø coil OD. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.500/550Hz-5KHz | LOW FREQUENCY REFLECTION SPOT PROBE, .500"Ø DIAMETER TOP MOUNT TRIAX FISCHER CONNECTOR, 550Hz-5KHz, .440"Ø coil OD. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.55-1 | LOW FREQUENCY SPOT PROBE RIGHT ANGLE REFLECTION TRIAX FISCHER CONNECTOR 1-100KHZ. DIAMETER= .550" | 1 | |
| ASDP-.55/500HZ | SURFACE SPOT PROBE, STANDARD BRIDGE .55"Ø DIAMETER TOP MOUNT TRIAX FISCHER CONNECTOR 500Hz-5KHz. Includes Test Report and Certificate of conformance. | 1 | |
| ASDP-.620 | SURFACE PROBE STANDARD BRIDGE .620" DIAMETER TOP MOUNT TRIAX FISCHER CONNECTOR 300Hz-10KHz. Includes Test Report and Certificate of conformance. Olympus P/N: 9213011 | 1 | |
| ASDP-.625 | LOW FREQUENCY REFLECTION SPOT PROBE, COIL O.D. .500"Ø, OVERALL PROBE DIAMETER .625"Ø(OD) WITH TOP MOUNT TRIAX FISCHER CONNECTOR. FREQUENCY: 300HZ-10KHZ. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.625/10K | LOW FREQUENCY REFLECTION SPOT PROBE, COIL O.D. .500"Ø, OVERALL PROBE DIAMETER .625"Ø(OD) WITH TOP MOUNT TRIAX FISCHER CONNECTOR. FREQUENCY: 5KHz-20KHz. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.625/300HZ-10K | LOW FREQUENCY REFLECTION SPOT PROBE, COIL O.D. .500"Ø, OVERALL PROBE DIAMETER .625"Ø(OD) WITH TOP MOUNT TRIAX FISCHER CONNECTOR. FREQUENCY: 300HZ-10KHZ. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-.75/2K | Low Frequency Surface Spot probe, bridge, with a diameter of .75 inch (19.0 mm) and a operating range of 100 Hz - 2 kHz Supplied with a Top Mounted Triax Fischer / LEMO Connector. Model: SL/100HZ-2KHZ/.75". Test Report and Certificate of Conformance... | 1 | |
| ASDP-.75/2K-7L | Low Frequency Surface Spot probe, bridge, with a diameter of .75 inch (19.0 mm) and a operating range of 100 Hz - 2 kHz Supplied with a Top Mounted 7-pin LEMO Connector. Model: SL/100HZ-2KHZ/.75". Test Report and Certificate of Conformance provided... | 1 | |
| ASDP-.980/100HZ | LOW FREQUENCY SPOT PROBE REFLECTION .980" DIAMETER(OD) TOP MOUNTED TRIAX FISCHER CONNECTOR. FREQUENCY: 100HZ-500HZ. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-1.0/300HZ | SURFACE SPOT PROBE, STANDARD BRIDGE 1.0"Ø DIAMETER TOP MOUNT TRIAX FISCHER CONNECTOR 300HZ. Includes Test Report and Certificate of conformance. | 1 | |
| ASDP-1.2/100HZ | LOW FREQUENCY SPOT PROBE REFLECTION 1.200"Ø DIAMETER WITH SIDE MOUNTED TRIAX FISCHER CONNECTOR. FREQUENCY: 100HZ-700HZ. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-1.250/100HZ | LOW FREQUENCY SPOT PROBE REFLECTION 1.200"Ø DIAMETER WITH SIDE MOUNTED TRIAX FISCHER CONNECTOR. FREQUENCY: 100HZ-700HZ. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-5/4L | REFLECTION SPOT PROBE ACETAL BODY | 1 | |
| ASDP-6.746M/20-40K | LOW FREQUENCY SPOT PROBE REFLECTION 6.746 MM DIAMETER(OD) TOP MOUNT 7 PIN LEMO CONNECTOR. FREQUENCY: 20-40KHZ. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDP-9.128M | LOW FREQUENCY SPOT PROBE REFLECTION 9.128 MM DIAMETER(OD) TOP MOUNT 7 PIN LEMO CONNECTOR. FREQUENCY: 1-4KHZ. Includes Test Report and Certificate of Conformance. | 1 | |
| ASDPR-.5/500HZ-50K | REFLECTION SPOT PROBE ACETAL BODY, SHIELDED, 500Hz-50KHz, .500"Ø (12.7mm)OD, SUPPLIED WITH A RIGHT MOUNTED TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ASE-00747-05 | COVER, ICE DETECTOR PROBE | 1 | |
| ASLD-500H-NS | ET Sliding Probe, 500Hz-50KHz, Dual Microdot, No Spacers | 1 | |
| ASPN-475-6/6MHZ | RIGID SURFACE PROBE 45° DEGREES .750 CRANK, 6.0" LONG .092" Ø DIAMETER SHAFT, ABSOLUTE SHIELDED 6MHz SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATCSM100-.125 | MANUAL COUNTER SINK PROBE 100° DEGREES 50-500KHz WITH TRIAX FISCHER CONNECTOR .125"Ø DIAMETER. Includes Test Report and Certificate of Conformance. | 1 | |
| ATCSM100-.156 | MANUAL COUNTER SINK PROBE 100° DEGREES 50-500KHz WITH TRIAX FISCHER CONNECTOR .156"Ø DIAMETER. Includes Test Report and Certificate of Conformance. | 1 | |
| ATCSM100-.187 | MANUAL COUNTER SINK PROBE 100° DEGREES 50-500KHz WITH TRIAX FISCHER CONNECTOR .187"Ø DIAMETER. Includes Test Report and Certificate of Conformance. | 1 | |
| ATCSM100-.375 | MANUAL COUNTER SINK PROBE 100° DEGREES 50-500KHz WITH TRIAX FISCHER CONNECTOR .375"Ø DIAMETER. Includes Test Report and Certificate of Conformance. | 1 | |
| ATCSM100-.437 | MANUAL COUNTER SINK PROBE 100° DEGREES 50-500KHz WITH TRIAX FISCHER CONNECTOR .437"Ø DIAMETER. Includes Test Report and Certificate of Conformance. | 1 | |
| ATCSM100-.500 | MANUAL COUNTER SINK PROBE 100° DEGREES 50-500KHz WITH TRIAX FISCHER CONNECTOR .500"Ø DIAMETER. Includes Test Report and Certificate of Conformance. | 1 | |
| ATCSM100-.562 | MANUAL COUNTER SINK PROBE 100° DEGREES 50-500KHz WITH TRIAX FISCHER CONNECTOR .562"Ø DIAMETER. Includes Test Report and Certificate of Conformance. | 1 | |
| ATCSM100-.625 | MANUAL COUNTER SINK PROBE 100° DEGREES 50-500KHz WITH TRIAX FISCHER CONNECTOR .625"Ø DIAMETER. Includes Test Report and Certificate of Conformance. | 1 | |
| ATCSM100-.687 | MANUAL COUNTER SINK PROBE 100° DEGREES 50-500KHz WITH TRIAX FISCHER CONNECTOR .687"Ø DIAMETER. Includes Test Report and Certificate of Conformance. | 1 | |
| ATCSM100-.750 | MANUAL COUNTER SINK PROBE 100° DEGREES 50-500KHz WITH TRIAX FISCHER CONNECTOR .750"Ø DIAMETER. Includes Test Report and Certificate of Conformance. | 1 | |
| ATP-VJ-28-1000 ADV | VIDEOSCOPE / BORESCOPE WITH 2.8 MM PROBE, AND 1 METER SCOPE LENGTH. | 1 | |
| ATP-VJ-39-1500 ADV | VIDEOSCOPE / BORESCOPE WITH 3.9 MM PROBE, AND 1.5 METRE SCOPE LENGTH. | 1 | |
| ATP-VJ-39-3000 ADV | VIDEOSCOPE / BORESCOPE WITH 3.9 MM PROBE, AND 3 METRE SCOPE LENGTH. | 1 | |
| ATP-VJ-69-1500 ADV | VIDEOSCOPE / BORESCOPE WITH 6.9 MM PROBE, AND 1.5 METRE SCOPE LENGTH. | 2 | |
| ATP-VJ-69-3000 ADV | VIDEOSCOPE / BORESCOPE WITH 6.9 MM PROBE, AND 3 METRE SCOPE LENGTH. | 2 | |
| ATP-VJ-69-5000 ADV | VIDEOSCOPE / BORESCOPE WITH 6.9 MM PROBE, AND 5 METRE SCOPE LENGTH. | 3 | |
| ATPN-45-8 | RIGID SURFACE PROBE, 45° .125" DIAMETER .500" DROP TRIAX FISCHER CONNECTOR 50-500KHZ.8.0" LONG Includes Test Report and Certificate of Conformance .. | 1 | |
| ATPNR-903-6 | Handheld Detachable Pencil Tip Probe 90° Degrees, ABS Shielded, Reflection, Diameter: 0.125in (3mm); Tube ID, 0.030" inch (0.8mm) Drop, Frequency: 50-500 kHz, 6.0in (152mm); Supplied with a Triaxial Fischer Connector. Includes Test Report and Certifica | 1 | |
| AUR-.083SS/3.0WL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .083"(2.11mm)Ø, 76.2mm(3.0") WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-.093SS/55MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, HEAD DIAMETER = .093"Ø(2.36mm), (2.16")55mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AUR-.099SS/3.0WL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .099"(2.51mm)Ø, 76.2mm(3.0") WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-.115SS/3.0WL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .115"(2.92mm)Ø, 76.2mm(3.0") WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-.125SE/1.75WL-LF | Universal Rotary Hole Probe, Self Expanding from 0.125 inch (3.18mm) to 0.156 inch (3.96mm) diameter, 1.75 inch (44 mm) working length, Operating frequency 100 kHz - 500KHz Supplied with a Fischer 4 pin connector, reflection differential coil configura... | 1 | |
| AUR-.125SS/1.1WL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .125"(3.175mm)Ø, 27.94mm(1.1") WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-.156SE | Self-adjusting, Universal with "Bell" backshell Rotary Hole Probe..0.156 in. (3.97 mm) diameter, Self Expanding 1.75 in. (44.4 mm) working length.Operating frequency 200 kHz -3 MHz, Fischer 4 Pin connector, reflectiondifferential coil configuration. In... | 1 | |
| AUR-.156SE/1.75WL-LF | Universal Rotary Hole Probe Self Expanding from 0.156 inch (3.96 mm) to 0.187 inch (4.7 mm) diameter, 1.75 inch (44 mm) working length, Operating frequency 100 kHz - 500kHz Supplied with a Fischer 4 pin connector, reflection differential coil configura... | 1 | |
| AUR-.156SS/40MWL | STAINLESS STEEL ROTATING SCANNER PROBE, 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. DIAMETER: .156"(3.96mm)Ø, 40mm(1.57") WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-.171SS/40MWL | STAINLESS STEEL ROTATING SCANNER PROBE, 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. DIAMETER: .1719"(4.37mm)Ø, 40mm(1.57") WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-.185SS/15MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED. HEAD DIAMETER: .185"Ø(4.70mm), 15mm(.591") WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-.187SE | PROBE FOR EQUIPMENT DETECTING CRACKS BY EDDY CURRENT, FOR AIRCRAFT REPAIR PROCESS. | 1 | |
| AUR-.187SE/1.75WL-LF | Universal Rotary Hole Probe Self expanding from 0.187 inch (4.75 mm) to 0.250 inch (6.35mm) diameter, 1.75 inch(44 mm) working length, Operating frequency 100 kHz - 500KHz Supplied with a Fischer 4 pin connector, reflection differential coil configurat... | 1 | |
| AUR-.187SS/1.5WL | UNIVERSAL ROTARY HOLE PROBE STAINLESS STEEL HOUSING, 0.187 INCH (4.75MM) DIAMETER, 1.1 INCH (2.79CM) WORKING LENGTH. OPERATING FREQUENCY 200KHZ -3MHZ, FISCHER 4 PIN CONNECTOR, REFLECTION DIFFERENTIAL COIL CONFIGURATION. | 1 | |
| AUR-.187SS/40MWL | STAINLESS STEEL ROTATING SCANNER PROBE, 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. DIAMETER: .187"(4.75mm)Ø, 40mm(1.57") WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-.203SS/40MWL | STAINLESS STEEL ROTATING SCANNER PROBE, 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. DIAMETER: .203"(5.16mm)Ø, 40mm(1.57") WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-.218SE/2.0WL-LF | Universal Rotary Hole Probe Self Expanding from 0.218 inch (5.5 mm) to 0.250 inch (6.3mm) diameter, 2.00 inch(50 mm) working length, Operating frequency 100 kHz - 500KHz Supplied with a Fischer 4 pin connector, reflection differential coil configuratio... | 1 | |
| AUR-.218SS/40MWL | STAINLESS STEEL ROTATING SCANNER PROBE, 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. DIAMETER: .21875"(5.54mm)Ø, 40mm(1.57") WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-.234SS/40MWL | STAINLESS STEEL ROTATING SCANNER PROBE, 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. DIAMETER: .234"(5.94mm)Ø, 40mm(1.57") WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-.247SS/15MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED. HEAD DIAMETER: .247"Ø(6.27mm), 15mm(.591") WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-.250SE/2.0WL-LF | Universal Rotary Hole Probe Self expanding from 0.250 inch (6.35 mm) to 0.312 inch (7.14 mm) diameter, 2.00 inch (51 mm) working length, Operating frequency 100 kHz - 500KHz Fischer 4 pin connector, reflection differential coil configuration. Includes ... | 1 | |
| AUR-.250SS/1.5WL | UNIVERSAL ROTARY HOLE PROBE STAINLESS STEEL HOUSING, 0.250 INCH (6.35MM) DIAMETER, 2.0 INCH (5.08CM) WORKING LENGTH. OPERATING FREQUENCY 200KHZ -3MHZ, FISCHER 4 PIN CONNECTOR, REFLECTION DIFFERENTIAL COIL CONFIGURATION. | 1 | |
| AUR-.250SS/35MWL | ROTARY PROBE, DIAMETER 0.250 IN (6.35 MM,)FREQ. 200 KHZ ‐ 2 MHZ | 1 | |
| AUR-.250SS/40MWL | STAINLESS STEEL ROTATING SCANNER PROBE, 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. DIAMETER: .250"(6.35mm)Ø, 40mm(1.57") WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-.281SS/40MWL | STAINLESS STEEL ROTATING SCANNER PROBE, 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. DIAMETER: .281"(7.14mm)Ø, 40mm(1.57") WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-.312SE/2.0WL-LF | Universal Rotary Hole Probe Self expanding from 0.312 inch (7.9 mm) to 0.375 inch (9.5 mm) diameter, 2.00 inch (50 mm) working length, Operating frequency 100Khz - 500Khz Supplied with a Fischer 4 pin connector, reflection differential coil configurat... | 1 | |
| AUR-.312SS/1.5WL | UNIVERSAL ROTARY HOLE PROBE STAINLESS STEEL HOUSING, 0.312 INCH (7.92MM) DIAMETER, 1.5 INCH (3.81CM) WORKING LENGTH. OPERATING FREQUENCY 200KHZ -3MHZ, FISCHER 4 PIN CONNECTOR, REFLECTION DIFFERENTIAL COIL CONFIGURATION. | 1 | |
| AUR-.312SS/3WL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .312"Ø(7.92mm), (3.0")76.2mm WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-.312SS/40MWL | STAINLESS STEEL ROTATING SCANNER PROBE, 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. DIAMETER: .312"(7.92mm)Ø, 40mm(1.57") WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-.375SE/2.0WL-LF | Universal Rotary Hole Probe Self Expanding from 0.375 inch (9.5mm) to 0.437 inch (11.0mm) diameter, 2 inch (50 mm) working length. Operating frequency 100 KHz - 500KHz Supplied with a Fischer 4 pin connector, reflection differential coil configuration.... | 1 | |
| AUR-.375SS/1.5WL | UNIVERSAL ROTARY HOLE PROBE STAINLESS STEEL HOUSING, 0.375 INCH (9.53MM) DIAMETER, 1.5 INCH (3.81CM) WORKING LENGTH. OPERATING FREQUENCY 200KHZ -3MHZ, FISCHER 4 PIN CONNECTOR, REFLECTION DIFFERENTIAL COIL CONFIGURATION. | 1 | |
| AUR-.437SE/2.0WL-LF | Universal Rotary Hole Probe Self Expanding from 0.437 inch (11.1mm) to 0.500 inch (12.7mm) diameter, 2 inch (50 mm) working length, Operating frequency 100KHz - 500KHz Supplied with a Fischer 4 pin connector, reflection differential coil configuration.... | 1 | |
| AUR-.500SE/2.0WL-LF | Universal Rotary Hole Probe Self Expanding from 0.500 inch (12.6 mm) to 0.562 inch (14.2 mm) diameter, 2 inch (50 mm) working length, Operating frequency 100kHz - 500KHz Supplied with a Fischer 4 pin connector, reflection differential coil configuratio... | 1 | |
| AUR-.500SS/1.5WL | UNIVERSAL ROTARY HOLE PROBE STAINLESS STEEL HOUSING, 0.500 INCH (12.7MM) DIAMETER, 2.0 INCH (5.08CM) WORKING LENGTH. OPERATING FREQUENCY 200KHZ -3MHZ, FISCHER 4 PIN CONNECTOR, REFLECTION DIFFERENTIAL COIL CONFIGURATION. | 1 | |
| AUR-.562SE/2.0WL-LF | Universal Rotary Hole Probe 0.562 inch (14.27mm) to 0.625 inch (15.87mm) diameter, Self Expanding 2 inch (50 mm) working length, Operating frequency 100 kHz - 500KHz Supplied with a Fischer 4 pin connector, reflection differential coil configuration ( ... | 1 | |
| AUR-.562SS/65MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .562"(14.27mm) 65mm WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-.625SE/2.0WL-LF | Universal Rotary Hole Probe 0.625 inch (15.87mm) to 0.687 inch (17.45mm) diameter, Self Expanding 2 inch (50 mm) working length, Operating frequency 100 KHz - 500KHz Supplied with a Fischer 4 pin connector, reflection differential coil configuration ( ... | 1 | |
| AUR-.625SS/65MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, 4 PIN FISCHER CONNECTOR. PROBE DIAMETER: .625"Ø (5/8")(15.90mm) WITH A 2.56"(65mm) WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-.687SE/2.0WL-LF | Universal Rotary Hole Probe 0.687 inch (17.45mm) to 0.750 inch (19.3mm) diameter, Self Expanding 2 inch (50 mm) working length, Operating frequency 100 KHz - 500KHz Supplied with a Fischer 4 pin connector, reflection differential coil configuration ( .... | 1 | |
| AUR-.687SS/75MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .687" (11/16") 2.95"(75mm) WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-.750SE/2.0WL-LF | Universal Rotary Hole Probe 0.750 inch (19.0 mm) to 0.812 inch (20.6 mm) diameter, Self Expanding 2 inch (50 mm) working length, Operating frequency 100 KHz - 500KHz Fischer 4 pin connector, reflection differential coil configuration ( .750-.812) Inclu... | 1 | |
| AUR-.786SE/4.0WL | Universal Rotary Hole Probe 0.786 inch (19.96 mm) to 0.875 inch (22.23 mm) diameter, Self Expanding 4 inch (101.6 mm) working length, Operating frequency 100 kHz - 2 MHz Fischer 4 pin connector, reflection differential coil configuration ( .900-.968) Incl | 1 | |
| AUR-1.75SE/2.0WL | Universal Rotary Hole Probe 1.75 inch (44.45 mm) to 1.812 inch (46.12 mm) diameter, Self Expanding 2 inch (50 mm) working length, Operating frequency 200 kHz - 3MHz Fischer 4 pin connector, reflection differential coil configuration Includes Test Repor... | 1 | |
| AUR-10.2MSS/50MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR, 10.2mmØ DIAMETER, 50mm WORKING LENGTH Includes Test Report and Certificate of Conformance | 1 | |
| AUR-10.7MSS/50MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR, 10.7mmØ DIAMETER, 50mm WORKING LENGTH Includes Test Report and Certificate of Conformance | 1 | |
| AUR-11.7MSS/50MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .461"Ø(11.7mm), 1.97"(50mm) WORKING LENGTH. Compatible with Rohmann Elotest SMR4 Rotor. Includes Test Report and Certificate... | 1 | |
| AUR-12.0MSS/65MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .472"Ø(12.00mm), 2.56"(65mm) WORKING LENGTH. Compatible with ETHER NDE ARD002 Rohmann Elotest SMR4 Rotor. Includes Test Report and Certifica... | 1 | |
| AUR-12.0MSS/82MWL-1 | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 50KHz-2.5MHz SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .472"Ø(12.00mm), 3.22"(82mm) WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-12.6MSS/35MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, 12.6mmØ DIAMETER, 35mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-12.9MSS/35MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, 12.9mmØ DIAMETER, 35mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-13.0MSS/35MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .512"Ø(13.0mm), 1.38"(35mm) WORKING LENGTH. Compatible with Rohmann Elotest SMR4 Rotor. Includes Test Report and Certificate... | 1 | |
| AUR-13.0MSS/50MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .512"Ø(13.0mm), 1.97"(50mm) WORKING LENGTH. Compatible with Rohmann Elotest SMR4 Rotor. Includes Test Report and Certificate... | 1 | |
| AUR-13.0MSS/65MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .512"Ø(13.00mm), 2.56"(65mm) WORKING LENGTH. Compatible with ETHER NDE ARD002 Rohmann Elotest SMR4 Rotor. Includes Test Report and Certifica... | 1 | |
| AUR-13.1MSS/50MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR, 13.1mmØ DIAMETER, 50mm WORKING LENGTH Includes Test Report and Certificate of Conformance | 1 | |
| AUR-13.3MSS/35MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, 13.3mmØ(.524") DIAMETER, 35mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-13.4MSS/50MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .528"Ø(13.4mm), 1.97"(50mm) WORKING LENGTH. Compatible with Rohmann Elotest SMR4 Rotor. Includes Test Report and Certificate... | 1 | |
| AUR-13.5MSS/50MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR, 13.5mmØ DIAMETER, 50mm WORKING LENGTH Includes Test Report and Certificate of Conformance | 1 | |
| AUR-13.8MSS/50MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .543"Ø(13.8mm), 1.97"(50mm) WORKING LENGTH. Compatible with Rohmann Elotest SMR4 Rotor. Includes Test Report and Certificate... | 1 | |
| AUR-13.9MSS/50MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR, 13.9mmØ DIAMETER, 50mm WORKING LENGTH Includes Test Report and Certificate of Conformance | 1 | |
| AUR-14.0MSS/50MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .551"Ø(14.0mm), 1.97"(50mm) WORKING LENGTH. Compatible with Rohmann Elotest SMR4 Rotor. Includes Test Report and Certificate... | 1 | |
| AUR-14.0MSS/65MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .551"Ø(14.00mm), 2.56"(65mm) WORKING LENGTH. Compatible with ETHER NDE ARD002 Rohmann Elotest SMR4 Rotor. Includes Test Report and Certifica... | 1 | |
| AUR-14.2MSS/35MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, 14.2mmØ DIAMETER, 35mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-14.4MSS/50MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .567"Ø(14.4mm), 1.97"(50mm) WORKING LENGTH. Compatible with Rohmann Elotest SMR4 Rotor. Includes Test Report and Certificate... | 1 | |
| AUR-14.6MSS/50MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR, 14.6mmØ DIAMETER, 50mm WORKING LENGTH Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-15.0MSS/50MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .591"Ø(15.0mm), 1.97"(50mm) WORKING LENGTH. Compatible with Rohmann Elotest SMR4 Rotor. Includes Test Report and Certificate... | 1 | |
| AUR-15.0MSS/65MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .591"Ø(15.00mm), 2.56"(65mm) WORKING LENGTH. Compatible with ETHER NDE ARD002 Rohmann Elotest SMR4 Rotor. Includes Test Report and Certifica... | 1 | |
| AUR-15.1MSS/35MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR, 15.1mmØ(.594") DIAMETER, 35mm(1.38") WORKING LENGTH Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-15.1MSS/50MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR, 15.1mmØ DIAMETER, 50mm WORKING LENGTH Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-15.4MSS/50MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .606"Ø(15.4mm), 1.97"(50mm) WORKING LENGTH. Compatible with Rohmann Elotest SMR4 Rotor. Includes Test Report and Certificate... | 1 | |
| AUR-15.5MSS/50MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR, 15.5mmØ DIAMETER, 50mm WORKING LENGTH Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-15.6MSS/50MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .614"Ø(15.6mm), 1.97"(50mm) WORKING LENGTH. Compatible with Rohmann Elotest SMR4 Rotor. Includes Test Report and Certificate... | 1 | |
| AUR-15.8MSS/50MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR, 15.8mmØ DIAMETER, 50mm WORKING LENGTH Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-16.0MSS/50MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .630"Ø(16.0mm), 1.97"(50mm) WORKING LENGTH. Compatible with Rohmann Elotest SMR4 Rotor. Includes Test Report and Certificate... | 1 | |
| AUR-16.0MSS/65MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .630"Ø(16.00mm), 2.56"(65mm) WORKING LENGTH. Compatible with ETHER NDE ARD002 Rohmann Elotest SMR4 Rotor. Includes Test Report and Certifica... | 1 | |
| AUR-16.1MSS/50MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .634"Ø(16.1mm), 1.97"(50mm) WORKING LENGTH. Compatible with Rohmann Elotest SMR4 Rotor. Includes Test Report and Certificate... | 1 | |
| AUR-16.2MSS/50MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR, 16.2mmØ DIAMETER, 50mm WORKING LENGTH Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-16.3MSS/50MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .642"Ø(16.3mm), 1.97"(50mm) WORKING LENGTH. Compatible with Rohmann Elotest SMR4 Rotor. Includes Test Report and Certificate... | 1 | |
| AUR-16.6MSS/50MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE, 16.6mmØ DIAMETER, 100KHz-2MHz, 50mm WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-16.9MSS/50MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHz-2MHz SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .665"Ø(16.9mm), 1.97"(50mm) WORKING LENGTH. Compatible with Rohmann Elotest SMR4 Rotor. Includes Test Report and Certificate... | 1 | |
| AUR-17.0MSS/65MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .669"Ø(17.00mm), 2.56"(65mm) WORKING LENGTH. Compatible with ETHER NDE ARD002 Rohmann Elotest SMR4 Rotor. Includes Test Report and Certifica... | 1 | |
| AUR-18.0MSS/65MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .709"Ø(18.00mm), 2.56"(65mm) WORKING LENGTH. Compatible with ETHER NDE ARD002 Rohmann Elotest SMR4 Rotor. Includes Test Report and Certifica... | 1 | |
| AUR-19.0MSS/65MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .748"Ø(19.00mm), 2.56"(65mm) WORKING LENGTH. Compatible with ETHER NDE ARD002 Rohmann Elotest SMR4 Rotor. Includes Test Report and Certifica... | 1 | |
| AUR-2.00SE/2.0WL | Universal Rotary Hole Probe 2.00 inch (50.80 mm) to 2.062 inch (52.37 mm) diameter, Self Expanding 2 inch (50 mm) working length, Operating frequency 200 kHz - 3MHz Fischer 4 pin connector, reflection differential coil configuration Includes Test Repor... | 1 | |
| AUR-20.0MSS/65MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .787"Ø(20.00mm), 2.56"(65mm) WORKING LENGTH. Compatible with ETHER NDE ARD002 Rohmann Elotest SMR4 Rotor. Includes Test Report and Certifica... | 1 | |
| AUR-21.0MSS/35MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .827"Ø(21.00mm), 1.38"(35mm) WORKING LENGTH. Compatible with ETHER NDE ARD002 Rohmann Elotest SMR4 Rotor. Includes Test Report and Certifica... | 1 | |
| AUR-21.0MSS/65MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .827"Ø(21.00mm), 2.56"(65mm) WORKING LENGTH. Compatible with ETHER NDE ARD002 Rohmann Elotest SMR4 Rotor. Includes Test Report and Certifica... | 1 | |
| AUR-22.0MSS/65MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .866"Ø(22.00mm), 2.56"(65mm) WORKING LENGTH. Compatible with ETHER NDE ARD002 Rohmann Elotest SMR4 Rotor. Includes Test Report and Certifica... | 1 | |
| AUR-22.6MSS/51MWL | STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR.57/64"Ø (22.61mm) DIAMETER HEAD.Includes Test Report and Certificate of Conformance... | 1 | |
| AUR-4.0MSS/35MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .157"Ø(4.00mm), 1.38"(35mm) WORKING LENGTH. Compatible with ETHER NDE ARD002 Rohmann Elotest SMR4 Rotor. Includes Test Report and Certifica... | 1 | |
| AUR-4.2MSS/50MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .165"Ø(4.20mm), 50mm WORKING LENGTH. Compatible with Rohmann Elotest SMR4 Rotor. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-4.9MSS/50MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .192"Ø(4.90mm), 1.97"(50mm) WORKING LENGTH. Compatible with Rohmann Elotest SMR4 Rotor. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-5.0MSS/82MWL-1 | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 50KHz-2.5MHz SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: 5.00mm (.197"Ø), 82mm (3.22") WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-5.6MSS/51MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .220"Ø(5.60mm), 2.0"(51mm) WORKING LENGTH. Compatible with Rohmann Elotest SMR4 or Ether ARD002 Rotor. Includes Test Report and Certificate... | 1 | |
| AUR-7.0MSS/35MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .276"Ø(7.00mm), 1.38"(35mm) WORKING LENGTH. Compatible with ETHER NDE ARD002 Rohmann Elotest SMR4 Rotor. Includes Test Report and Certificat... | 1 | |
| AUR-9.9MSS/35MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .390"Ø(9.9mm), 35mm(1.38") WORKING LENGTH. Compatible with Rohmann Elotest SMR4 Rotor. Includes Test Report and Certificate of Conformance. | 1 | |
| AUR-9.9MSS/50MWL | UNIVERSAL STAINLESS STEEL ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, 4 PIN FISCHER CONNECTOR. HEAD DIAMETER: .390"Ø(9.9mm), 50mm WORKING LENGTH. Compatible with Rohmann Elotest SMR4 Rotor. Includes Test Report and Certificate of Conformance. | 1 | |
| AURCS100-.187/4WL | UNIVERSAL ROTARY 100 DEGREE COUNTERSINK HOLE PROBE WITH PLASTIC HOUSING. 0.187 INCH (4.76MM) DIAMETER PILOT | 1 | |
| AURF-.156SS/2.25WL | Stainless Steel Universal Rotary Bolt Hole Probe, Shielded,. -.156" diameter. 2.25" Working Legth. Operating Frequency: 200 KHz - 3 MHz Supplied with a. 4 Pin Fischer connector. Includes Test Report and Certificate of Conformance | 1 | |
| AURF-.375SS/2.0WL | STAINLESS STEEL ROTATING SCANNER PROBE 200KHz-2MHz FERRITE SHIELDED, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. DIAMETER: .375"(9.5mm)Ø, 2.0"(51mm) WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFB-.324SS/2.0WL | STAINLESS STEEL FLAT BOTTOM ROTATING SCANNER PROBE, .324"Ø DIAMETER, 100KHz-2MHz, 2.0" WORKING LENGTH SUPPLIED WITH 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AURFB-.343SS/2.0WL | STAINLESS STEEL FLAT BOTTOM ROTATING PROBE, .343"Ø DIAMETER, 100KHz-2MHz, 2.0" WORKING LENGTH SUPPLIED WITH 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AURFB-.406SS/2.0WL | STAINLESS STEEL FLAT BOTTOM ROTATING PROBE, .406"Ø DIAMETER, 100KHz-2MHz, 2.0" WORKING LENGTH SUPPLIED WITH 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AURFB-.437SS/2.0WL | STAINLESS STEEL FLAT BOTTOM ROTATING PROBE, .437"Ø DIAMETER, 100KHz-2MHz, 2.0" WORKING LENGTH SUPPLIED WITH 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AURFB-.468SS/2.0WL | STAINLESS STEEL FLAT BOTTOM ROTATING PROBE, .468"Ø DIAMETER, 100KHz-2MHz, 2.0" WORKING LENGTH SUPPLIED WITH 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AURFB-.500SS/2.0WL | STAINLESS STEEL FLAT BOTTOM ROTATING PROBE, .500"Ø DIAMETER, 100KHz-2MHz, 2.0" WORKING LENGTH SUPPLIED WITH 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AURFB-.531SS/2.0WL | STAINLESS STEEL FLAT BOTTOM ROTATING PROBE, .531"Ø DIAMETER, 100KHz-2MHz, 2.0" WORKING LENGTH SUPPLIED WITH 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AURFB-.562SS/2.0WL | STAINLESS STEEL FLAT BOTTOM ROTATING PROBE, .562"Ø DIAMETER, 100KHz-2MHz, 2.0" WORKING LENGTH SUPPLIED WITH 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AURFB-187SE/2WL | ET FLAT BOTTOM ROTATING PROBE SIZE 3/16 | 1 | |
| AURFB-250SE/2WL | ET FLAT BOTTOM ROTATING PROBE SIZE 1/4 | 1 | |
| AURFB-375SE/2WL | ET FLAT BOTTOM ROTATING PROBE SIZE 3/8 | 1 | |
| AURFBSE-5.5M/40MWL | STANDARD UNIVERSAL EXPANDABLE FLAT BOTTOM ROTARY EDGE PROBE ( CENTERED COIL ) , 4 PIN FISCHER CONNECTOR 40mm(1.57") WORKING LENGTH 100KHZ-2MHZ. EXPANDABLE PROBE HEAD DIAMETER= 5.5mm(0.2165Ø - APPROXIMATELY 6.91mmØ 0.272"Ø. Includes Test Report and C... | 1 | |
| AURFBSE-6.0M/51MWL | STANDARD UNIVERSAL EXPANDABLE FLAT BOTTOM ROTARY EDGE PROBE ( CENTERED COIL ) , 4 PIN FISCHER CONNECTOR 51mm(2.0") WORKING LENGTH 100KHz-2MHz. EXPANDABLE PROBE HEAD DIAMETER= 8.0mm(0.236"Ø) - 10.0mmØ(.315"Ø). Includes Test Report and Certificate of Con | 1 | |
| AURFBSE-8.0M/51MWL | STANDARD UNIVERSAL EXPANDABLE FLAT BOTTOM ROTARY EDGE PROBE ( CENTERED COIL ) , 4 PIN FISCHER CONNECTOR 51mm(2.0") WORKING LENGTH 100KHz-2MHz. EXPANDABLE PROBE HEAD DIAMETER= 8.0mm(0.315"Ø) - 10.0mmØ(.394"Ø). Includes Test Report and Certificate of Con | 1 | |
| AURFX-.187-.75FT/4WL | UNIVERSAL FLEXIBLE ROTARY PROBE 100KHz-2MHz, 3/16"(.187")Ø FIXED DIAMETER TIP SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 4.0" WORKING LENGTH WITH A .75" LONG TIP LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFX-.218-.75FT/4WL | UNIVERSAL FLEXIBLE ROTARY PROBE 100KHz-2MHz, 7/32"(.218")Ø FIXED DIAMETER TIP SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 4.0" WORKING LENGTH WITH A .75" LONG TIP LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFX-.250-.75FT/4WL | UNIVERSAL FLEXIBLE ROTARY PROBE 100KHz-2MHz, 1/4"(.250")Ø FIXED DIAMETER TIP SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 4.0" WORKING LENGTH WITH A .75" LONG TIP LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFX-.250/.75T/4WL | FIXED DIAMETER FLEX SHAFT ROTARY PROBE,.250"Ø, 100KHz-2MHz, .750" LONG TIP, 4.0" WORKING LENGTH ( NO SLEEVE) SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFX-.375-.75FT/4WL | UNIVERSAL FLEXIBLE ROTARY PROBE 100KHz-2MHz, 3/8"(.375")Ø FIXED DIAMETER TIP SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 4.0" WORKING LENGTH WITH A .75" LONG TIP LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.437-.500/2M | UNIROTOR (UNIVERSAL) Y PROBE, 7/16"-1/2" DIAMETER, 1-3MHZ 2.0"WL | 1 | |
| AURY-.625-.750 | UNIROTOR ADJUSTABLE DIAMETER PROBE | 1 | |
| AURY-.750-.875 | UNIROTOR ADJUSTABLE DIAMETER PROBE | 1 | |
| AURY.156-.187SS | UNIROTOR (UNIVERSAL) Y PROBE, .156"-.187" DIAMETER, 100K-2MHZ, STAINLESS STEEL 1.5"WL | 1 | |
| AX5PN45-2/2M | RIGID SURFACE PROBE, 1-3MHz, 45°, .050"Ø TIP DIAMETER, .500" DROP, 2.0" LONG SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AXPN-45-5/1-3MHZ | Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 1-3MHz frequency range and has a center frequency of 2MHz. 45 degree angle shaft with a 0.50" (12.7mm) drop and a 0.072" (1.83mm) diameter tip. Total length of 5" (127mm). I... | 1 | |
| AXPN-475-4.5/2MHZ | RIGID SURFACE PROBE 45° DEGREES .750 CRANK, 4.5" LONG .072" Ø DIAMETER TIP, ABS SHIELDED, 1-3MHz(2MHz CENTER FREQUENCY) SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AXPN-95-6/2MHZ | ET SURFACE PROBE TIP ANGLE 90 DEGREE FREQUENCY 1MHZ-3MHZ | 1 | |
| B717-818 | Rudder Limiter Probe Covers, on l.e. of vert stab (set of 2) | 1 | |
| B737-415 | PITOT PROBE COVER - SET OF 5 (X2) | 1 | |
| B737NG/CFM56-7 | ENGINE WASH PROBE SET (T/R COWLS CLOSED VERSION) | 1 | |
| B747-355 | TAT PROBE COVERS, heat resistant type (set of 2) | 1 | |
| BHS.307-S/6 | E/C PROBE .307 diameter, Bolt hole special, split core, 6 Mhz | 1 | |
| BO2052 | Starrett 82B2 INDIVIDUAL PROBE ONLY | 1 | |
| BO2053 | Starrett 82B3 INDIVIDUAL PROBE ONLY | 1 | |
| BO2054 | Starrett 82B4 INDIVIDUAL PROBE ONLY | 1 | |
| BO2055 | Starrett 82B5 INDIVIDUAL PROBE ONLY | 1 | |
| BO2056 | Starrett 82B6 INDIVIDUAL PROBE ONLY | 1 | |
| BO2057 | Starrett 82B7 INDIVIDUAL PROBE ONLY | 1 | |
| BO212 | Starrett 82C2 INDIVIDUAL PROBE ONLY | 1 | |
| BO213 | Starrett 82C3 INDIVIDUAL PROBE ONLY | 1 | |
| BO214 | Starrett 82C4 INDIVIDUAL PROBE ONLY | 1 | |
| BO215 | Starrett 82C5 INDIVIDUAL PROBE ONLY | 1 | |
| BO217 | Starrett 82C7 INDIVIDUAL PROBE ONLY | 1 | |
| BO218 | Starrett 82C8 INDIVIDUAL PROBE ONLY | 1 | |
| BO219 | Starrett 82C9 INDIVIDUAL PROBE ONLY | 1 | |
| BP867043 | DETACHABLE PROBE KIT | 1 | |
| BPMF-10 | MANUAL BOLT HOLE PROBE FREQUENCY: 50KHZ-500KHZ DIAMETER: 3.9MM - 4.7MM SHIELDED CONNECTOR: MICRODOT | 1 | |
| BPRA-10-SS | RECHII SCANNER PROBE, STAINLESS STEEL .156" (5/32") DIAMETER, 1.1" WL 100KHZ - 2MHZ | 1 | |
| BPRA-12-SS | RECHII SCANNER PROBE, STAINLESS STEEL .187" (3/16") DIAMETER, 1.1" WL 100KHZ - 2MHZ | 1 | |
| BPRA-16-SS | RECHII SCANNER PROBE, STAINLESS STEEL .250" (1/4") DIAMETER, 1.1" WL 100KHZ - 2MHZ | 1 | |
| BPRA-8-SS | RECHII SCANNER PROBE, STAINLESS STEEL .125" (1/8") DIAMETER, 1.1" WL 100KHZ - 2MHZ | 1 | |
| BPU-12-SS | UNIVERSAL ROTARY HOLE PROBE STAINLESS STEEL HOUSING, 0.187 INCH (4.75MM) DIAMETER, 1.1 INCH (2.79CM) WORKING LENGTH. OPERATING FREQUENCY 200KHZ -3MHZ, FISCHER 4 PIN CONNECTOR, REFLECTION DIFFERENTIAL COIL CONFIGURATION. | 1 | |
| BPU-16-SS | UNIVERSAL ROTARY HOLE PROBE STAINLESS STEEL HOUSING, 0.250 INCH (6.35MM) DIAMETER, 2.0 INCH (5.08CM) WORKING LENGTH. OPERATING FREQUENCY 200KHZ -3MHZ, FISCHER 4 PIN CONNECTOR, REFLECTION DIFFERENTIAL COIL CONFIGURATION. | 1 | |
| BPU-20-SS | UNIVERSAL ROTARY HOLE PROBE STAINLESS STEEL HOUSING, 0.312 INCH (7.92MM) DIAMETER, 1.5 INCH (3.81CM) WORKING LENGTH. OPERATING FREQUENCY 200KHZ -3MHZ, FISCHER 4 PIN CONNECTOR, REFLECTION DIFFERENTIAL COIL CONFIGURATION. | 1 | |
| BPU-24-SS | UNIVERSAL ROTARY HOLE PROBE STAINLESS STEEL HOUSING, 0.375 INCH (9.53MM) DIAMETER, 1.5 INCH (3.81CM) WORKING LENGTH. OPERATING FREQUENCY 200KHZ -3MHZ, FISCHER 4 PIN CONNECTOR, REFLECTION DIFFERENTIAL COIL CONFIGURATION. | 1 | |
| BPU-32-SS | UNIVERSAL ROTARY HOLE PROBE STAINLESS STEEL HOUSING, 0.500 INCH (12.7MM) DIAMETER, 2.0 INCH (5.08CM) WORKING LENGTH. OPERATING FREQUENCY 200KHZ -3MHZ, FISCHER 4 PIN CONNECTOR, REFLECTION DIFFERENTIAL COIL CONFIGURATION. | 1 | |
| BPU-8-SS | UNIVERSAL ROTARY HOLE PROBE STAINLESS STEEL HOUSING, 0.125 INCH (3.18MM) DIAMETER, 1.1 INCH (2.79CM) WORKING LENGTH. OPERATING FREQUENCY 200KHZ -3MHZ, FISCHER 4 PIN CONNECTOR, REFLECTION DIFFERENTIAL COIL CONFIGURATION. | 1 | |
| BPUF-10 | BOLT-HOLE PROBE - 100 KHZ-2.0 MHZ FREQUENCY, SHIELDED, 0.156 IN. (3.96 MM) DIAMETER (OLYMPUS NDT OR EQUIVALENT) | 1 | |
| BPUF-32 | PROBE, ROTARY, 100KHZ-2MHZ FREQUENCY, SHIELDED, 0.500 IN. (12.70 MM) DIAMETER (OLYMPUS NDT OR EQUIVALENT). | 1 | |
| BT51 | BONDING METER + PROBES | 8 | |
| BT51-DH2-C-KIT | LOW RESISTANCE OHMMETER & DH2-C DUPLEX TWIST PROBE LEAD | 1 | |
| BT51/120 | BONDING METER + PROBES 120V | 1 | |
| BXM-32/40 | EDDY CURRENT PROBE WITH SHIELDED SCREW HOLE 17/32 INCH DIAMETER | 1 | |
| C15478 | Probe Set, Compass and dual point clamp style | 4 | |
| C15479 | Probe Set, Two pencil and two single point clamp style | 5 | |
| C15480 | Probe Set, Dual compass style | 4 | |
| C16695 | PROBE SET- FOUR PENC | 5 | |
| C22161 | Pistol Grip Probe Set | 7 | |
| C29575 | PISTOL GRIP PROBE SET (140") | 1 | |
| C34012-2 | Test Set Total Air Temp Probe | 8 | |
| C34012-21 | Test Set Total Air Temp Probe | 2 | |
| C601-140 | TAT PROBE COVERS (set of 2) | 1 | |
| C604-140 | TAT PROBE COVERS (set of 2) | 1 | |
| CE200985-0101 | Probeta para laminado | 1 | |
| CLF5 | PROBE CLF5 WITH 02 METER CABLE & LEMO 00 CONNECTOR, 15 MHZ COMPATIBLE WITH THICKNESS METER CL2O4 | 1 | |
| CM-ET-KISIG001A | ETHER NDE SIGMACHECK2 COMPLETE KIT W/ 13 MM PROBE | 1 | |
| CM-ET-KISIG001A-8 | ETHER NDE SIGMACHECK2 COMPLETE KIT W/ 8MM PROBE | 1 | |
| COM-14383 | PROBE - MULTIMETER, INSULATED, SLIM REACH | 1 | |
| CRJ-155 | TAT PROBE COVERS (set of 2) | 1 | |
| CSM-100-10 | PROBE 5/32 DIAMETER | 1 | |
| CSM-100-12 | PROBE 3/16 DIAMETER | 1 | |
| CSM-100-14 | PROBE 7/32 DIAMETER | 1 | |
| CSM-100-16 | PROBE 1/4 DIAMETER | 1 | |
| CSM100-10 | PROBE 5-32INCH DIAMETER | 1 | |
| CSU100-12-4.0WL | UNIVERSAL ROTARY 100 DEGREE COUNTERSINK HOLE PROBE WITH PLASTIC HOUSING. 0.187 INCH (4.76MM) DIAMETER PILOT | 1 | |
| CX-0504 | Probe Basket 1" to1.5" | 1 | |
| CX-0510 | Probe Basket 1 5/8" to 3" | 1 | |
| CZ001-13 | RE-CALIBRATION OF TEST SET C/W 2 PROBES. | 1 | |
| DA512 | DA 512 PROBE. 7.5MHZ X 7.5MM DIAMETER, RANGE 0.6-60MM IN STEEL W/POTTED CABLE. | 1 | |
| DAK99-0 | Probe #0 - Pin/Socket - Use with DRK100-1 | 2 | |
| DP867011 | DETACHABLE PROBE KIT | 1 | |
| DR891824 | Starrett P2731-0 PROBE/STEM | 1 | |
| DR891825 | Starrett P2731-1 PROBE/STEM DIA 3/8 | 1 | |
| DR891840 | Starrett P2751-1 PROBE | 1 | |
| DRK276-12 | Metal-Probe Unwired or Broken Contact Removal Tool, Size 12 | 2 | |
| DRK276-16 | Metal-Probe Unwired or Broken Contact Removal Tool, Size 16 | 2 | |
| DRK276-20 | Metal-Probe Unwired or Broken Contact Removal Tool, Size 20 | 2 | |
| DRK276-22 | Metal-Probe Unwired or Broken Contact Removal Tool, Size 22 | 2 | |
| DRK276-22D | Metal-Probe Unwired or Broken Contact Removal Tool, Size 22D | 2 | |
| DSN-50 | ABSOLUTE SHIELDED METAL SHAFT MICRODOT DETACHABLE PROBE PENCIL FOR USE OF FERROUS & NON FERROUS | 1 | |
| DT-1.25/50-500K | Pencil Probe, Detachable, 50-500KHz | 1 | |
| DT-1.25/500K-1M | Pencil Probe, Detachable, 500KHz-1MHz | 1 | |
| DT-1.25/6M | Pencil Probe, Detachable, 6MHz | 1 | |
| DT-3.4/50-500K | Pencil Probe, Detachable, Unshielded, 50-500KHz | 1 | |
| DT925-2.0/1M-2.5M | Pencil Probe, Detachable, 1MHz-2.5MHz | 1 | |
| DT925-2.0/50-500K | Pencil Probe, Detachable, 50-500KHz | 1 | |
| DT925-2.0/500K-1M | Pencil Probe, Detachable, 500KHz-1MHz | 1 | |
| DT925-2.0B/50-500K | Pencil Probe, Detachable, 50-500KHz, 30 deg Cranked Shaft | 1 | |
| DT95-2.0B/50-500K | Pencil Probe, Detachable, 50-500KHz | 1 | |
| EECS306C-4 | DIGITAL MULTIMETER PROBE SET | 1 | |
| EG-0459 | EG-0459 KELVIN PROBE (NEEDED FOR MILIOHMOMETER AX6000 MANUFACTURED BY ATEQ | 1 | |
| EMZ-SA | Scanner Adaptor, Zetec bolt hole probe to Rohmann rotary scanner | 1 | |
| ESR 6.4SS | DIAMETER 6.4 MM (1/4 INCH ) PROBE | 1 | |
| ESRC1 6.4SS | DIAMETER 6.4 PROBE | 1 | |
| ESRY 40-55M | ELOTEST Standard Rotor Y Probe, 40-55mm Diameter, 100Khz-2Mhz | 1 | |
| ESRY 5-6.5M | ELOTEST Standard Rotor Y Probe, 5-6.5mm Diameter, 100Khz-2Mhz | 1 | |
| ESRY.125-.187 | ELOTEST Standard Rotor Y Probe, .125-.187 Diameter, 100Khz-2Mhz | 1 | |
| ESRY.156-.187 | ELOTEST Standard Rotor Y Probe, .156-.187 Diameter, 100Khz-2Mhz | 1 | |
| ESRY.187-.250 | ELOTEST Standard Rotor Y Probe, .187-.250 Diameter, 100Khz-2Mhz | 1 | |
| ESRY.250-.312 | ELOTEST Standard Rotor Y Probe, .250-.312 Diameter, 100Khz-2Mhz | 1 | |
| ESRY.312-.375 | ELOTEST Standard Rotor Y Probe, .312-.375 Diameter, 100Khz-2Mhz | 1 | |
| ESRY.375-.437 | ELOTEST Standard Rotor Y Probe, .375-.437 Diameter, 100Khz-2Mhz | 1 | |
| ESRY.437-.500 | ELOTEST Standard Rotor Y Probe, .437-.500 Diameter, 100Khz-2Mhz | 1 | |
| ESRY.500-.625 | ELOTEST Standard Rotor Y Probe, .500-.625 Diameter, 100Khz-2Mhz | 1 | |
| ESRY.625-.750 | ELOTEST Standard Rotor Y Probe, .625-.750 Diameter, 100Khz-2Mhz | 1 | |
| ESRY.750-.875 | ELOTEST Standard Rotor Y Probe, .750-.875 Diameter, 100Khz-2Mhz | 1 | |
| ESRY.875-1.0 | ELOTEST Standard Rotor Y Probe, .875-1.0 Diameter, 100Khz-2Mhz | 1 | |
| ESRY1.0-1.125 | ELOTEST Standard Rotor Y Probe,1.0-1.125 Diameter, 100Khz-2Mhz | 1 | |
| ESRY1.500-1.625 | ELOTEST Standard Rotor Y Probe, 1.500- 1.625 Diameter, Shielded..100Khz-2Mhz | 1 | |
| ESRY1.625-1.750 | ELOTEST Standard Rotor Y Probe, 1.625- 1.750 Diameter, Shielded..100Khz-2Mhz | 1 | |
| ETA3.3H | PROBE: FOR FISCHER MP20 DUAL SCOPE SET | 1 | |
| ETher Weld Kit | ETher Weld Kit – includes, Probe, Weld, Dia 16.00mm (Medium) 100kHz, Probe, Unshielded, Broad Band, Test Block, Weld Probe, Lead, Lemo 12-Way - Lemo 4-Way, Lead. Lemo 00 to BNC, 1.5m, Butterfly PTFE Tape, Deluxe Probe Case PHDC1, Hard Transit Case | 1 | |
| ETher WeldCheck Eddy Current Portable Flaw Detector | ETher WeldCheck Eddy Current Portable Flaw Detector - Eddy current flaw detector, Lightweight & compact, suitable for rope access applications, Compatible with a range of probes | 1 | |
| F10-201 | PITOT/TAT PROBE COVER SET, heat resistant type (set of 3) | 1 | |
| F16-151 | PITOT COVER & AIR DATA PROBE COVER, heat resistant type (set of 2) | 1 | |
| F16-153 | AOA PROBE COVERS, Fabric Type (set of 2) | 1 | |
| F16-160 | TOTAL AIR TEMP PROBE TAT COVER, NSN 1730-01-542-3477 "COVER,AIRCRAFT GROUND SERVICING" (set of 2) | 1 | |
| F8973 | SHEAR WAVE PROBE – METALSCAN(F8973) RCSM, 60 DEGREE, 4 MHZ OR EQUIVALENT | 1 | |
| FLUKE 189 | INFRARED MEASUREMENT INSTRUMENT FLUKE MODEL 189 MULTIMETER (INCLUDING 80PK3A PROBE AND 80AK ADAPTER) | 4 | |
| FLUKE 52-2 | Dual Input Thermometer with 80PK-1 Bead Probe | 5 | |
| FLUKE 80PK-27 | THERMOMETER CONTACT PROBE | 1 | |
| FLUKE I1000S | CLAMP-ON AMMETER PROBE | 1 | |
| FLUKE-437-II | 1775 POWER QUALITY ANALYZER, (4) IFLEX 1500A PROBES, MAGNET PROBES, 1 MS/S TRANSIENT SAMPLING RATE, | 3 | |
| FLUKE1775 | 1775 POWER QUALITY ANALYZER, (4) IFLEX 1500A PROBES, MAGNET PROBES, 1 MS/S TRANSIENT SAMPLING RATE, | 1 | |
| FLUKE52 | DIGITAL CONTACT THERMOMETER -250 – 1372 ºC (2 PROBE THERMOCUOPLES) | 5 | |
| FLUKE87V | DIGITAL MULTIMETER WITH PROBE | 13 | |
| FLUTLA30 | PROBE - MULTIMETER, INSULATED, SLIM | 1 | |
| FPAS-3 | DEFECTOMETER SURFACE PROBE, STRAIGHT, 3" WITH .5" LONG TIP AND 2.5" HANDLE, SHIELDED, AUSTENITIC, 2M | 1 | |
| FPF92-6 | Defectometer Surface Probe, 90° x 6" Long, FE | 1 | |
| FPF95-6B | Defectometer Surface Probe, 90° x .5" drop x 6" Long, Ferrous, 30° bent handle | 1 | |
| FPN-10 | Defectometer Surface Probe, STRAIGHT 10" LONG, Unshielded, Non-ferrous | 1 | |
| FPN-3 | Defectometer Surface Probe, STRAIGHT 3" LONG, Unshielded, Non-ferrous | 1 | |
| FPN-4 | Defectometer Surface Probe, STRAIGHT 4" LONG, Unshielded, Non-ferrous | 1 | |
| FPN-5 | Defectometer Surface Probe, STRAIGHT 5" LONG, Unshielded, Non-ferrous | 1 | |
| FPN-6 | Defectometer Surface Probe, STRAIGHT 6" LONG, Unshielded, Non-ferrous | 1 | |
| FPN-7 | Defectometer Surface Probe, STRAIGHT 7" LONG, Unshielded, Non-ferrous | 1 | |
| FPN-8 | Defectometer Surface Probe, STRAIGHT 8" LONG, Unshielded, Non-ferrous | 1 | |
| FPN-9 | Defectometer Surface Probe, STRAIGHT 8" LONG, Unshielded, Non-ferrous | 1 | |
| FPN44-4 | Defectometer Surface Probe, 45deg, .4" drop, 4"long, .156" Shaft, Unshielded, Non-ferrous | 1 | |
| FPN95-10 | Defectometer Surface Probe, 90deg, .5" drop, 10", Unshielded, Non-ferrous | 1 | |
| FPN95-3 | Defectometer Surface Probe, 90deg, .5" drop, 3", Unshielded, Non-ferrous | 1 | |
| FPN95-4 | Defectometer Surface Probe, 90deg, .5" drop, 4", Unshielded, Non-ferrous | 1 | |
| FPN95-5 | Defectometer Surface Probe, 90deg, .5" drop, 5", Unshielded, Non-ferrous | 1 | |
| FPN95-6 | Defectometer Surface Probe, 90deg, .5" drop, 6", Unshielded, Non-ferrous | 1 | |
| FPN95-7 | Defectometer Surface Probe, 90deg, .5" drop,7", Unshielded, Non-ferrous | 1 | |
| FPN95-8 | Defectometer Surface Probe, 90deg, .5" drop, 8", Unshielded, Non-ferrous | 1 | |
| FPN95-9 | Defectometer Surface Probe, 90deg, .5" drop, 9", Unshielded, Non-ferrous | 1 | |
| FPNS-3 | Defectometer Surface Probe, Straight, 3" with .5" long tip and 2.5" handle, Shielded, Non-ferrous, 2Mhz, Microdot connector | 1 | |
| FPNS-3L00 | Defectometer Surface Probe, Straight, 3" with .5" long tip and 2.5" handle, Shielded, Non-ferrous, 2Mhz, Lemo connector | 1 | |
| FPNS-7 | Defectometer Surface Probe, Straight, 7" Long, Shielded, Non-ferrous, 2Mhz, Microdot connector | 1 | |
| FPNS44-4/L00 | Defectometer Surface Probe, 45deg, .4" drop, 4"long, .156" Shaft, Shielded, Non-ferrous, L00 Connector | 1 | |
| FPNS82-4 | Defectometer Surface Probe, 80 Deg, 4", Shielded, Non-ferrous | 1 | |
| FPNS94-4 | Defectometer Surface Probe, 90deg, .4" drop, 4"long, .156" Shaft, Shielded, Non-ferrous | 1 | |
| FPNS94-5B | Defectometer Surface Probe, NFE, Shielded | 1 | |
| FPNS94-5B/L00 | Defectometer Surface Probe, NFE, Shielded, L00 Connector | 1 | |
| FPNS94-7 | Defectometer Surface Probe, °90 x .4" drop, 7" with 3" handle and 4" shaft, Shielded, Non-ferrous | 1 | |
| FPNS94-7B | Defectometer Surface Probe, .156" Dia. x .4" drop x 7" long, 2MHz, NFE | 1 | |
| FPNS95-9 | Defectometer Surface Probe, 90° x .5" drop, 9" with 3" handle and 6" shaft, Shielded, Non-ferrous, Microdot Connector | 1 | |
| FPNS96-6B | Defectometer Surface Probe w/30 degree Bend, .098" tubing, .6" drop, 6" long, NFE, Shielded | 1 | |
| G10001-1 | COVER - PT2 ENGINE INLET PRESSURE PROBE | 1 | |
| G109-105 | PITOT COVER AND TOTAL ENERGY PROBE (set of 2) | 1 | |
| G212----1A | ELCOMETER 212 DIGITAL POCKET THERMOMETER WITH LIQUID PROBE | 1 | |
| G212/1A | ELCOMETER 212 DIGITAL POCKET THERMOMETER WITH LIQUID PROBE | 1 | |
| G4-202 | PITOT PROBES/AOA/ID/TAT SET, heat resistant type (set of 7) | 1 | |
| G4-MD-IMAGED-OS-WIN2016 | G4-MD-IMAGED-OS-WIN2016;Drive Spares Metadata Probe Imaged Drive Set 2016 | 1 | |
| G5-203 | PITOT PROBES/AOA/TAT SET, heat resistant type (G-V and up) (set of 8) | 1 | |
| G5-206 | PITOT PROBES/AOA/TAT SET, heat resistant type (G450 Models) (set of 7) | 1 | |
| G5-211 | PITOT PROBES/TAT/ICE DETECTOR SET, heat resistant type (G650 models) (set of 6) | 1 | |
| G5-MDP-010-MW | G5-MDP-010-MW;Annual Maintenance Contract for G5 10G Metadata Probe Appliance | 1 | |
| G5-MDP-060-MW | G5-MDP-060-MW;Annual Maintenance Contract for G5 60G Metadata Probe Appliance | 1 | |
| G600-101061-1 | PROTECTOR, ICE DETECT.PROB | 4 | |
| G600-101061−1 | PROTECTOR - ICE DETECTION PROBE | 4 | |
| G600−101061−1 | Protector − Ice Detection Probe | 4 | |
| G601R101205-1 | PROTECTOR ICE DETECTION PROBE | 7 | |
| G601R101205-1 | ICE DETECTION PROBE PROTECTOR | 7 | |
| G601R101205−1 | Protector − Ice Detection Probe | 7 | |
| G7-210 | PITOT PROBES/TAT/ICE DETECTOR SET, heat resistant type (set of 6) | 1 | |
| G700-101213-1 | PROTECTOR - ICE DETECTION PROBE | 4 | |
| G700-284102-1 | KIT, CRIMPING DIE SET FUEL PROBES | 2 | |
| G700−101213−1 | Protector − Ice Detection Probe | 4 | |
| GA111 | STETHOSCOPE - MECHANICS, 12 INCH PROBE | 1 | |
| GA111, OR | STETHOSCOPE - MECHANICS, 12 INCH PROBE | 1 | |
| GA111C | STETHOSCOPE - MECHANICS, 12 INCH PROBE | 3 | |
| GA111D | STETHOSCOPE 12" PROBE | 5 | |
| GA111D. | STETHOSCOPE - MECHANICS, 12 INCH PROBE | 5 | |
| GE Hocking Locator 3 | GE Hocking Locator 3 - Eddy current flaw detector, Conductivity and Coating Thickness modes, Long battery life (up to 8 hours), Compatible with a range of probes | 1 | |
| GE XLGO 6160+ system (6m) | GE XLGO 6160+ system (6m) - 6.1mm/6m Videoprobe + Stereo Measurement, XpertSuite enhances the probability of detecting and identifying flaws using precise steering, superior visibility and easier viewing | 1 | |
| GE206P4XF (100-500 KHZ) | SURFACE PROBE 45°TIP, 500KHZ, SHIELDED 0.092 IN. (2.34 MM) DIAMETER , 4.50 IN. (114,30 MM) LENGHT. | 1 | |
| GM07/ TP002 | MAGMETER GM07 WITH HALL PROBE TP002 | 1 | |
| GSB1011011 | COVERS - ICE DETECTION PROBES FOR P/N 511081 AND 510920−1 | 1 | |
| GSB3080002 | TOOL, TEST, ICE DETECTOR PROBE | 1 | |
| GSE1000294 | ICE DETECTOR PROBE COVER-GSE1000294 | 1 | |
| H1000-210 | ICE DETECTOR PROBE COVER | 1 | |
| H294 | TEMPCAL TEST SET + PROBES & TRANSFORMER | 3 | |
| HCS1418 | VACUUM PROBE, ALUMINUM, BAYONET TYPE | 2 | |
| HH99A-T1 | HANDLE AND PROBE SET, DIGITAL THERMOMETER OMEGA ENGINEERING INC. CAGE CODE: 29907. (MODEL HDX-SET-FSP-T-OST, MODE HH99A-T1) | 1 | |
| HOCKING P/N205P4 | FASTENER HOLE PROBE - DIFFERENTIAL ROTATINGMETAL 7.8 MM (200 KHZ - 2 MHZ) OR SIMILAR | 1 | |
| HP444A | DETECTOR PROBE | 1 | |
| HRF.187 | Hocking Mini Rotor Probe, .187" Diameter, Shielded - 2" Working Length, 100KHz-2MHz | 1 | |
| HRF.250 | Hocking Mini Rotor Probe, .250" Diameter, Shielded - 2" Working Length, 100KHz-2MHz | 1 | |
| HRF.281 | Hocking Mini Rotor Probe, .281" Diameter, Shielded - 2" Working Length, 100KHz-2MHz | 1 | |
| HRF.312 | Hocking Mini Rotor Probe, .312" Diameter, Shielded - 2" Working Length, 100KHz-2MHz | 1 | |
| HRF.343 | Hocking Mini Rotor Probe, .343" Diameter, Shielded - 2" Working Length, 100KHz-2MHz | 1 | |
| HRF.375 | Hocking Mini Rotor Probe, .375" Diameter, Shielded - 2" Working Length, 100KHz-2MHz | 1 | |
| HRF.437 | Hocking Mini Rotor Probe, .437" Diameter, Shielded - 2" Working Length, 100KHz-2MHz | 1 | |
| HRF.500 | Hocking Mini Rotor Probe, .500" Diameter, Shielded - 2" Working Length, 100KHz-2MHz | 1 | |
| HRF.562 | Hocking Mini Rotor Probe, .562" Diameter, Shielded - 2" Working Length, 100KHz-2MHz | 1 | |
| HRF.625 | Hocking Mini Rotor Probe, .625" Diameter, Shielded - 2" Working Length, 100KHz-2MHz | 1 | |
| HRF.750 | Hocking Mini Rotor Probe, .750" Diameter, Shielded - 2" Working Length, 100KHz-2MHz | 1 | |
| HRF.875 | Hocking Mini Rotor Probe, .875" Diameter, Shielded - 2" Working Length, 100KHz-2MHz | 1 | |
| HRF1.0 | Hocking Mini Rotor Probe, 1.0" Diameter, Shielded - 2" Working Length, 100KHz-2MHz | 1 | |
| HRFLX.187/8-SS | Hole Probe, Flex Shaft, Hocking Mini Scanner, .187" OD, 6" length, 100Khz-2MHz, SSteel Fixed diameter Tip | 1 | |
| HRFLX.240/3.5/SS | Hole Probe, Flex Shaft, Hocking Mini Scanner, .240" OD, 3.5" length, 100Khz-2MHz, SSteel Fixed diameter Tip | 1 | |
| HRFLX.307/3.5/SS | Hole Probe, Flex Shaft, Hocking Mini Scanner, .307" OD, 3.5" Working length, 100Khz-2MHz, SSteel Fixed diameter Tip | 1 | |
| HRX.187-.250 | Adjustable Scanner Probe, X type for Hocking Mini, .187"-250" Diameter, 100KHZ-2MHZ | 1 | |
| HRX.187-.250/2M | Adjustable Scanner Probe, X type for Hocking Mini, .187"-250" Diameter, 1-3MHz | 1 | |
| HRX.250-.312 | Adjustable Scanner Probe, X type for Hocking Mini, .250"-312" Diameter, 100KHZ-2MHZ | 1 | |
| HRX.250-.312/2M | Adjustable Scanner Probe, X type for Hocking Mini, .187"-250" Diameter,1-3Mhz | 1 | |
| HRX.312-.375 | Adjustable Scanner Probe, X type for Hocking Mini, .312"-375" Diameter, 100KHZ-2MHZ | 1 | |
| HRX.312-.375/2M | Adjustable Scanner Probe, X type for Hocking Mini, .312"-375" Diameter, 1-3MHz | 1 | |
| HRX.375-.437 | Adjustable Scanner Probe, X type for Hocking Mini, .375"-437" Diameter, 100KHZ-2MHZ | 1 | |
| HRX.375-.437/2M | Adjustable Scanner Probe, X type for Hocking Mini, .375"-437" Diameter, 1-3MHz | 1 | |
| HRX.437-.500 | Adjustable Scanner Probe, X type for Hocking Mini, .437"-500" Diameter, 100KHz-2MHz | 1 | |
| HRX.500-.625 | Adjustable Scanner Probe, X type for Hocking Mini, .500"-625" Diameter, 100KHz-2MHz | 1 | |
| HRX.500-.625/3WL | Adjustable Scanner Probe, X type for Hocking Mini, .500"-625" Diameter, 100KHz-2MHz, 3"WL | 1 | |
| HRX.625-.750 | Adjustable Scanner Probe, X type for Hocking Mini, .625"-750" Diameter, 100KHz-2MHz | 1 | |
| HRX.750-.875 | Adjustable Scanner Probe, X type for Hocking Mini, .750"-.875" Diameter, 100KHz-2MHz | 1 | |
| HRX.875-1.0/4WL | Adjustable Scanner Probe, X type for Hocking Mini, .875"-1.0" Diameter, 100KHz-2MHz, 4"WL | 1 | |
| HRX.875-1.000 | Adjustable Scanner Probe, X type for Hocking Mini, .875"-1.0" Diameter, 100KHz-2MHz | 1 | |
| HRX1.0-1.125 | Adjustable Scanner Probe, X type for Hocking Mini, 1.0"-1.125" Diameter, 100KHz-2MHz | 1 | |
| HRX2.0-2.125 | Adjustable Scanner Probe, X type for Hocking Mini, 2.0"-2.125" Diameter, 100KHz-2MHz | 1 | |
| HRX2.125-2.25 | Adjustable Scanner Probe, X type for Hocking Mini, 2.125"-2.25" Diameter, 100KHz-2MHz | 1 | |
| HRX2.25-2.375 | Adjustable Scanner Probe, X type for Hocking Mini, 2.25"-2.375" Diameter, 100KHz-2MHz | 1 | |
| HRX2.375-2.5 | Adjustable Scanner Probe, X type for Hocking Mini, 2.375"-2.5" Diameter, 100KHz-2MHz | 1 | |
| HRY.187-.250 | PROBE, ADJUSTABLE BOLT-HOLE, 100 KHZ TO 2.0 MHZ FREQUENCY, DIFFERENTIAL COILS. 0.187 IN. (4.75 MM) TO 0.250 IN. (6.35 MM) DIAMETER, (TECHNA NDT OR EQUIVALENT) | 1 | |
| HRY.312-.375 | PROBE, ROTARY BOLT-HOLE, ADJUSTABLE FROM 0.312 IN. (7.92 MM) TO 0.375 IN. (9.52 MM) DIAMETER, 100 KHZ TO 2.0 MHZ FREQUENCY RANGE, DIFFERENTIAL, SHIELDED, PLASTIC ROTATING BOLTHOLE PROBE (TECHNA NDT OR EQUIVALENT) | 1 | |
| HRY.500-.625 | ROTARY SCANNER PROBE, 500 KHZ TO 2.0 MHZ FREQUENCY, 0.500 IN. (12.70 MM) TO 0.625 IN. (15.88 MM) DIAMETER, (TECHNANDT OR EQUIVALENT) | 1 | |
| HU32498/2 | TOOL - SETTING (LPT SPEED SENSING PROBE) | 1 | |
| HU37640 | PLATE - SETTING, LP TURBINE SPEED PROBES. | 5 | |
| I SEND ON EMAIL SPECIFICATION | I AM INTERESTED TO BUY 3 PCS OF BELOW EQUIPMENT ( SPECIFICATION ATTACHED) FOR EXPORT CAN YOU CONFIRM AVAILABILITY? PLS OFFER PRICE AND TERMS OF PURCHASE VIDEO SURVEILLANCE EQUIPMENT CONSISTING OF A BASE UNIT AND TWO PROBES Æ4.0 AND Æ6.1 WITH SETS O | 1 | |
| I30 | CLAMP-ON AMMETER PROBE | 6 | |
| ID-400 | ICE DETECTOR PROBE PROTECTOR COVER | 4 | |
| ID400-1 | COVER - PROBE, ICE DETECTOR | 1 | |
| J26007-1 | THERMOMETER - DIGITAL, 0-150 /- 2 DEGREES F, WITH A PROBE, THERMOCOUPLE OR EQUIVALENT | 7 | |
| J47202 | SET OF PROBE GUIDES | 1 | |
| J59095 | PROBE-NON METALIC FLEXIBLE | 1 | |
| JC410C | RF VOLTMETER WITH AC PROBE | 1 | |
| JMP-CFM56-D-4435 | CFM56-2/5ENGINEWASHX2PROBETOOL | 2 | |
| JMP-PW4000-D-4856 | FAN ENG WASH PROBES SET | 1 | |
| JMP/CF34/D/6553/BRACKETS | (Port & Starboard) CF34-8C/E Engine Probe Brackets Only | 1 | |
| JMP/CF6/D/4037/BRACKETS | (Port & Starboard) CF6-80C2 Engine Probe Brackets Only | 1 | |
| JMP/CF6/D/4947/BRACKETS | (Port & Starboard) CF6-80E1 Engine Probe Brackets Only | 1 | |
| JMP/CF6/D/6511 | WASHING PROBE (Set of 2) | 1 | |
| JMP/CFM56/D/4435/BRACKETS | (Port & Starboard) CFM56-2 & 5A Engine Probe Brackets Only | 1 | |
| JMP/CFM56/D/4462 | PROBE-SET | 5 | |
| JMP/CFM56/D/4462/BRACKETS | (Port & Starboard) CFM56-7 Engine Probe Brackets Only | 1 | |
| JMP/CFM56/D/4538/BRACKETS | (Port & Starboard) CFM56-3 Engine Probe Brackets Only | 1 | |
| JMP/CFM56/D/4605 | CFM: SET (PORT & STARBOARD) CFM56-5B/C SHORT ENGINE PROBES, PER SET THRUST REVERSERS OPEN | 3 | |
| JMP/CFM56/D/4605/BRACKETS | (Port & Starboard) CFM56-5B/C Engine Probe Brackets Only | 1 | |
| JMP/CFM56/D/4777/C200 | ENGINE WASH PROBE SET (T/R COWLS CLOSED VERSION) | 2 | |
| JMP/GE90-115B/D/4948 | LONG ENGINE PROBE SET (115B) - WATER WASH | 1 | |
| JMP/GE90-115B/D/4949/BRACKETS&FITTINGS | (Port & Starboard) GE90-115b Engine Probe Brackets/Fittings Only | 1 | |
| JMP/GE90/D/4081/BRACKETS&FITTINGS | (Port & Starboard) GE90 Engine Probe Brackets/Fittings Only | 1 | |
| JMP/GENX/D/6698 | ENGINE PROBE BOEING 787, BOEING 747-800 GENX (LONG AND SHORT PROBES COMBINATION SET) | 1 | |
| JMP/GENX/D/6783/BRACKETS | (Port & Starboard) GEnx Engine Probe Brackets Only | 1 | |
| JMP/GEnx/D/6698 (11C4308P02) | Engine Probe Boeing 787, Boeing 747-800 GEnx (Long and Short Probes Combination Set) | 1 | |
| JMP/GP7200/D/7035/BRACKETS | (Port & Starboard) GP7200 Engine Probe Brackets Only | 1 | |
| JMP/LEAP/D/7028 | LEAP: SET (PORT & STARBOARD) LEAP SHORT ENGINE PROBES, PER SET THRUST REVERSERS OPEN | 2 | |
| JMP/LEAP/D/7028/BRACKETS | (PORT & STARBOARD) LEAP 1A/B/C SHORT PROBE BRACKETS ONLY | 1 | |
| JMP/LEAP/D/7028/BRACKETS | (Port & Starboard) LEAP 1A/B/C Short Probe Brackets Only | 1 | |
| JMP/PW4000/D/4856 | 94" FAN ENG WASH PROBES SET | 1 | |
| JMP/RB211/D/4153/BRACKETS | (Port & Starboard) RB211-535E4 Short Probe Brackets Only | 1 | |
| JMP/SaM146/D/6797 | Engine Probe Sukhoi Superjet 100 SaM 146 | 1 | |
| JMP/TRENT-XWB/D/6834 | '1 SET TRENT XWB LONG ENGINE PROBES | 1 | |
| JMP/TRENT/D/4702/BRACKETS | (Port & Starboard) Trent 772 Short Probe Brackets Only | 1 | |
| JMP/TRENT/D/6188/BRACKETS | (Port & Starboard) Trent 500 Short Probe Brackets Only | 1 | |
| JMP/V2500/D/4040/BRACKETS | (Port & Starboard) V2500 Engine Probe Brackets Only | 1 | |
| JSP413 | METAL PROBES YA6500 | 1 | |
| KAPS 281-1E | Parametric Probe, 90 degree shaft | 1 | |
| KAPS 291-1E.6 | Parametric probe | 1 | |
| KAPS 330-1E | Custom Design Parametric Probe | 1 | |
| KAS121-31 | ET HF PROBE | 1 | |
| KC4 | KELVIN PROBE FOR 97F9200350000 MILLIOHMMETER | 1 | |
| KD1H1472 | SS ROTARY PROBE, 17MM WORKING LENGTH, 6.2MM DIAMETER, 4PIN FISCHER, ROHMANN DESIGN | 1 | |
| KD1H52404-2 | FLEXIBLE SHAFT SCANNER PROBE, 6.1MM DIAMETER, 90MM WL, A320 PT6 53-31-50 PG623, 100KHZ-2MHZ | 1 | |
| KD1H52408-2 | FLEXIBLE SHAFT SCANNER PROBE, 7.8MM DIAMETER, 90MM WL, A320 PT6 53-31-50 PG623, 100KHZ-2MHZ | 1 | |
| KD20H1182 | PROBE SET | 1 | |
| KPC3-480-325 | COVER, PITOT PROBE,(SET OF 3) | 20 | |
| KPC3-775-625 | SET-PITOT STATIC PROBE COVER | 15 | |
| KTSS-HH | K THERMOMETER PROBE | 1 | |
| L70-058 | PITOT COVERS w/AOA STRAP, TAT PROBE, heat resistant type (set of 4) | 1 | |
| LA-560T | NDT PROBES 5 MHZ WITH A 0.38 INCH (9.7 MM) DIAMETER CRYSTAL | 1 | |
| LANAH-118 | LANAH-118-1257(BORESCOPESETPROBE6MMDIAMETER3,5MTSLONG(PROBE TIPSET)) | 1 | |
| LJ731-131 | AOA CONE, STALL VANES, TAT PROBE SET (set of 4) | 1 | |
| LP3-120 | PITOT & PLUGS SET (2 pitot covers, 1 transducer probe cover, 2 heat exchanger inlet plugs) (set of 5) | 1 | |
| LP3-205 | PITOT & PROBE COVER SET, Equivalent or Better than P/N: AF48D19094 (set of 4) | 1 | |
| LPEN92-6/500K | ET SURFACE PROBE TIP ANGLE 90 DEGREE FREQUENCY 200KHZ-1MHZ | 1 | |
| LS023-2/4F | PROBE, SPOT FACE, BRIDGE, FREQ. 100 HZ TO 2 KHZ, 4F‐FISHER CONNECTOR, DIAMETER 0.375 IN | 1 | |
| LS023‐2/4F | PROBE, SPOT FACE, BRIDGE, FREQ. 100 HZ TO 2 KHZ, 4F‐FISHER CONNECTOR, DIAMETER 0.375 IN | 1 | |
| LTCT25494-01 | Probe Assembly, Nozzle, Inlet Pressure | 1 | |
| LTCT25495-01 | Probe Assembly, Nozzle Inlet Temperature | 1 | |
| LTCT25563-01 | Probe Assembly, Air Inlet | 1 | |
| M1 | BONDING METRE WITH PROBE | 5 | |
| M1-EXT | 5 FEET REMOTE PROBE EXTENSION CAB | 1 | |
| M1-TIPS-LNG | M1B BONDING METER PROBE TIPS (MINIMUM ORDER QUANTITY X2) | 1 | |
| M1-TIPS-NRW | M1B BONDING METER PROBE TIPS (MINIMUM ORDER QUANTITY X2) | 1 | |
| MANTIS-16:64PR-TFM64 | ULTRASONIC TEST SET WITH PROBES | 1 | |
| MBB402 | PROBE SET | 1 | |
| MBB502-2 | PROBE NFE FOR DEFECTOMETER | 1 | |
| MC1.156 | PROBE 5/32 DIAMETER | 1 | |
| MC1.218 | PROBE 7/32 DIAMETER | 1 | |
| MCSP-004 | MANUAL COUNTER SINK PROBE 100° DEGREES 500KHz-2MHz WITH TRIAX FISCHER CONNECTOR .125"Ø DIAMETER. Includes Test Report and Certificate of Conformance. | 1 | |
| MH.125 | 1/8” DIAMETER, FERRITE SHIELDED MANUAL BOLT HOLE PROBE WITH SWIVEL COLLAR, 50-500 KHZ0-2MHZ, MICRODOT CONNECTOR | 1 | |
| MH.187 | SHIELDED BOLT HOLE PROBE 3/16 INCH DIAMETER | 1 | |
| MH.250 | SHIELDED BOLT HOLE PROBE 1/4 INCH DIAMETER | 1 | |
| MH.875 | SHIELDED BOLT HOLE PROBE 7/8 INCH DIAMETER | 1 | |
| MMP-70FX | ET PROBE | 1 | |
| MMP905-60-1-3M | ET SURFACE PROBE TIP ANGLE 90 DEGREE FREQUENCY 1MHZ-3MHZ | 1 | |
| MODEL6342 | TEST PROBES TEST LEAD SET | 1 | |
| MP-30-200K-1M | PROBETA | 1 | |
| MP30 Deltascope | MP30 Deltascope - Deltascope, Ability to calibrate on a coating of unknown thickness (for magnetic induction method only), Automatic probe recognition | 1 | |
| MP455-40C-1-3M | ABSOLUTE PROBE METAL SHIELD IT | 1 | |
| MP455-60-1-3M | MICRODOT DETACHABLE PENCIL PROBE U8620098 | 1 | |
| MP902-50 | ABSOLUTE SHIELDED METAL SHAFT MICRODOT DETACHABLE PROBE PENCIL | 1 | |
| MP902-60 | SHIELDED SURFACE PROBE 1/8 INCH DIAMETER | 1 | |
| MP905-120FX | SHIELDED SURFACE PROBE 1/8 INCH DIAMETER WITH FLEXIBLE COPPER SHAFT | 1 | |
| MP905-40 | METAL SHAFT (90° SURFACE PROBE,) | 1 | |
| MP905-60B-50-500 | METAL SHAFT PROBE | 1 | |
| MP905-80FX | FLEXIBLE COPPER SHAFT PROBE - SURFACE, 90 DEGREE, 500 KHZ FREQUENCY, NFE, ABSOLUTE, SHIELDED, 0.125 IN. (3.175 MM) DIAMETER, 8.0 IN. (203.2 MM) LONG, 0.50 IN. (12.7 MM) TIP LENGTH, (OLYMPUS OR EQUIVALENT) | 1 | |
| MP907-70-1-3M | ABSOLUTE SHIELDED METAL SHAFT MICRODOT DETACHABLE PENCIL PROBE #MP907-70-1-3M | 1 | |
| MPEN 925-4.5/2M | PROBE - SURFACE 90 DEGREES, 350 KHZ TO 3 MHZ FREQUENCY, FE/NFE, ABSOLUTE, SHIELDED, MICRODOT CONNECTOR, 0.092 IN. (2.34 MM) DIAMETER, 4.50 IN (114.3 MM) LONG, 0.250 IN. (6.35 MM) TIP LENGTH, (GEIT OR EQUIVALENT). | 2 | |
| MPEN-4.5/500K | PROBE STRAIGHT, FREQUENCY RANGE 50 KHZ TO 500 KHZ, NFE, SHIELDED, ABSOLUTE, 0.092 IN. (2.34 MM) TIP DIAMETER, 4.50 IN. (114.30 MM) LENGTH. (GEIT OR EQUIVALENT) | 1 | |
| MPENSS-1.5/2M | .095" tip 1.5" Straight Surface Probe, 1-3MHz, Shielded, Microdot, SS 1" x .25 Diameter Handle | 1 | |
| MPENU475-4.5/500K | PROBE 45 DEGREE, CRANKED, ABSOLUTE SHIELDED, 50-500 KHZ FREQUENCY, NFE/FE, 0.092 IN. (2.34 MM) TIP DIAMETER, 4.50 IN. (114.3 MM) LONG, 0.75 IN. (19.1 MM) TIP LENGTH, (GEIT OR EQUIVALENT) | 1 | |
| MPS30 | AIR DATA TEST SET + PROBE A320 AND B737 CL AND NG (BUT ALSO EMB 170-175-190-195 AND ATR 42-72) | 3 | |
| MRRP-1-4.0-35 | Mini-rotary probe dia diameter 4.0mm" | 1 | |
| MRRP-RUK-1-13.1-50 | MINI ROTARY PROBE, diameter 13.1mm | 1 | |
| MRRP-RUK-1-13.5-50 | MINI ROTARY PROBE, diameter 13.5mm | 1 | |
| MRRP-RUK-1-14.3-50 | MINI ROTARY PROBE, diameter 14.3mm | 1 | |
| MRRP-RUK-1-14.7-50 | MINI ROTARY PROBE, diameter 14.7mm | 1 | |
| MRRP-RUK-1-15.9-50 | MINI ROTARY PROBE, diameter 15.9mm | 1 | |
| MRRP-RUK-1-16.3-50 | MINI ROTARY PROBE, diameter 16.3mm | 1 | |
| MRRP-RUK-1-25.0-75 | Mini rotary probe, hole diameter 25.0mm | 1 | |
| MRRP-RUK-1-25.8-75 | Mini rotary probe, hole diameter 25.8mm | 1 | |
| MRRP-RUK-1-26.6-75 | Mini rotary probe, hole diameter 26.6mm | 1 | |
| MRRP-RUK-1-27.4-75 | Mini rotary probe, hole diameter 27.4mm, | 1 | |
| MRRP-RUK-1-6.4-50 | Mini rotary probe to fit hole diameter 6 | 1 | |
| MRRP-RUK-1-8.4-50 | MINI ROTARY PROBE, diameter 8.4mm | 1 | |
| MRRP-RUK-1-9.5-50 | Mini rotary probe to fit hole diameter 9 | 1 | |
| MRRP-RUK-1-9.9-50 | MINI ROTARY PROBE, diameter 9.9mm | 1 | |
| MSWQC242-591 | MSW-QC PROBE, 2.25MHZ, 0.5” DIAMETER | 1 | |
| MTF 905-60-B | SURFACE PENCIL PROBE, 90 DEGREES DROP ANGLE, 50-500 KHZ FREQUENCY, CRANKED, ABSOLUTE, SHIELDED, 0.125 IN. (3.18 MM) DIAMETER, 6.00 IN. (152.4 MM) LENGTH, 30 DEGREE BENT SHAFT ANGLE (AT THE HANDLE), 0.500 IN. (12.70 MM) TIP LENGTH, (OLYMPUS OR EQUIVALENT) | 1 | |
| MTF-60FX-1-6M | PROBE, ANGULO RETO | 1 | |
| MTF9010-60FX | METAL SHAFT PROBE | 1 | |
| MTF902-50FX 200K-1M | RIGHT ANGLE FLEXIBLE METAL SHAFT SURFACE PROBE | 1 | |
| MTTL430 | BACK PROBE SET OF 3 | 1 | |
| MTTL7004 | PIERCING PROBE SET | 1 | |
| MTTL7005PK | SET, BACKPROBES | 1 | |
| MTTL7006 | MICRO BACK PROBE SET 2PC. | 1 | |
| MTTL7007 | RIGID BACK PROBE SET | 1 | |
| MTTL720 | BCK PROB SET 20PC 5 COLOR ODEG | 1 | |
| MTTL750 | 4PC 0.8MM DIA. BACK PROBE SET | 1 | |
| MTTL754 | BACKPROBE SPOON 4PC SET | 1 | |
| MTTLB720 | BCK PROB SET 5 COLOR | 1 | |
| MULTIMETER PROBES | MULTIMETER PROBES | 1 | |
| MVIQAP6130 | PROBE,GE 6.1 MM X 9.8 FEET | 3 | |
| MVIQAP6145-A | MVIQ HANDSET WITH DUAL CONTROLLER USER INTERFACE 3 MVIQAP6145-A MENTOR VISUAL IQ QUICK CHANGE INTERCHANGE VIDEO PROBE ARTICULATING GUIDE TUBE | 1 | |
| MVIQAP8430 | MENTOR VISUAL IQ QUICKCHANGE INTERCHANGEABLE VIDEO PROBE - 8.4 MM DIAMETER X 3.0 METER LENGTH | 1 | |
| MVIQAT4SET | PROBE TIPS SET BORES | 1 | |
| MVQ-POD | MENTOR VISUAL IQ PROBABILLITY OF DETECTION ENHANCE | 1 | |
| N3110 | PROTECTIVE ICE CONDITION DETECTOR, PROBE COVER | 1 | |
| N4147100-BX | BORESCOPE, EXTENSIONPROBE DIAMETER: DE 6MM, PROBE LENGTH: 3500 MM, FIELD OF VIEW: 120°, FOCUS: 17 MM AT INFINITY, MAX. PROBE: 100°C; | 1 | |
| N4149400 | EA LENS FOR PROBE, OLYMPUS, DIRECT VISION, 6 MM PROBE DIAMETER, 120° VISUAL RANGE, FOCAL DEPTH: 7 - 250 MM, INCLUDE O SEAL AND PROTECTOR CASE | 2 | |
| N4149500 | LENS FOR PROBE, OLYMPUS, DIRECT VISION, 6 MM PROBE DIAMETER, 120° VISUAL RANGE, FOCAL DEPTH: 19 - ∞ MM, INCLUDE O SEAL AND PROTECTOR CASE | 3 | |
| N4149700 | LENS FOR PROBE, OLYMPUS, LATERAL VISION, 6 MM PROBE DIAMETER, 120° VISUAL RANGE, FOCAL DEPTH: 20 - ∞ MM, INCLUDE O SEAL AND PROTECTOR CASE | 2 | |
| NC-3110 | COVER - PROBE ICE CONDITIONS DETECTOR | 4 | |
| NEC 4028-2 | RING PROBE. NEC 4028-2; 0.50 INCH INNER DIAMETER, 1.0 INCH OUTER DIAMETER, 0.84 INCH (21 MM) HEIGHT; NDT ENGINEERING CORP | 1 | |
| NEC-1084 | PROBE, HFEC – 0.19" DIAMETER | 1 | |
| NEC-1807 | PROBE - "NEC-1807,0.25 INCH(6.4MM)DIAMETER;9213550,SR/2K | 1 | |
| NEC-2091 | SPECIAL PROBE CANADAIR JET 53-41-182 PT6 PG3 | 1 | |
| NEC-2092 | SPECIAL PROBE CANADAIR JET 53-41-182 PG4 PT 6 | 1 | |
| NEC-4088-5 | ET PROBE, ET - BRIDGE (1-40 KHZ) | 1 | |
| NEC-8012 | EDDY CURRENT PROBE SET, F-16 SIDE STICK CONTROLLER DIAPHRAGM | 1 | |
| NEC-8020 | PROBE SET, EDDY CURRENT | 1 | |
| OLYMPUS IPLEX NX SCOPE 4MM 3.5M | OLYMPUS IPLEX NX SCOPE 4MM 3.5M - 4MM/3.5M VIDEOPROBE WITH WIDE FIELD STEREO MEASUREMENT, TIP ARTICULATION, RUGGED AND DURABLE, DETACHABLE SCREEN | 1 | |
| ONA800A-SP-CPB | ONA800A-SP-CPB;OneAdvisor 800 Bundle ONA800A-SP PIM Test Probe/Blanket | 1 | |
| ONA800A-SPO-CPB | ONA800A-SPO-CPB;OneAdvisor 800 Bundle ONA800A-SPO PIM Test Probe/Blanket | 1 | |
| OPTIMETER-FCPROBE-LUM-K3 | OPTIMETER-FCPROBE-LUM-K3;Lumen Optimeter with FiberChek Probe Package | 1 | |
| Olympus Chain Scanner | Olympus Chain Scanner - TOFD, phased array, or pulse-echo, Pipe range outside diameters: 45mm to 965mm, Spring-loaded probe holders ensure good probe contact | 1 | |
| Olympus IPLEX NX Scope 4mm 3.5m | Olympus IPLEX NX Scope 4mm 3.5m - 4mm/3.5m Videoprobe with wide field Stereo Measurement, Tip articulation, Rugged and durable, Detachable screen | 1 | |
| Olympus RexoFORM Scanner | Olympus RexoFORM Scanner - Corrosion mapping, Can be used on pipes of different diameters with no need for multiple curved wedges, Compatible with the A12 and A14 probes | 1 | |
| P-300 | DIGITAL THERMOMETER WITH PENTRATION PROBE | 2 | |
| P2731-1 | STARRETT DIGITAL PROBE | 2 | |
| P2D-HSC6 | CABLE, MINI DRIVE UNIT, (TECHNANDT OR EQUIVALENT) PROBE - SURFACE, 90 DEGREES, 500 KHZ FREQUENCY, FE/NFE ABSOLUTE, SHIELDED, 0.130 IN. (3.30 MM) DIAMETER, 6.00 IN. (152.4 MM) LONG, 1.00 IN. (25.4 MM) TIP LENGTH, (GE OR EQUIVALENT) | 1 | |
| P905-40-5K | SMALL DIAMETER LFEC PROBE(0.25") | 1 | |
| PAB0030 | TOOL,PENCIL PROBE,FREQUENCY RANGE OF 50 KHZ- 500 KHZ, 3IN. (76.2 MM) LONG, 0.125 IN. (3.175 MM) TIP DIAMETER, STRAIGHT, ABSOLUTE, BRIDGE, SHIELDED | 1 | |
| PAB905525 | HFEC PROBE,FREQUENCY RANGE OF 500 KHZ TO 3 MHZ, 0.125 IN.(3.17 MM) DIAMETER, 0.250 IN. (6.35 MM) DROP, ABSOLUTE, BRIDGE, SHIELDED | 1 | |
| PAB9090-.060FX | PENCIL PROBE,FREQUENCY RANGE OF 50 KHZ-500 KHZ, 9.0 IN. (229 MM) LONG, 0.125 IN. (3.2 MM) DIAMETER, 0. 060 IN. (1.52 MM) DROP, STRAIGHT, FLEXIBLE, ABSOLUTE, BRIDGE, SHIELDED | 1 | |
| PABM90605/.063 | PENCIL PROBE,50 KHZ - 500 KHZ, 6.0 IN. (152.4 MM) LONG, 0.125 IN. (3.2 MM) DIAMETER, 0.063 IN. (1.6 MM) TIP DIAMETER, 0.5 IN. (13 MM) DROP, ABSOLUTE, SHIELDED | 1 | |
| PD08419 | PROBE, RING, (DONUT) 250HZ - 40KHZ FREQUENCY RANGE, 0.33 IN (8.4 MM) INTERNAL DIAMETER, 0.75 IN (19.0 MM) EXTERNAL DIAMETER | 1 | |
| PDL 601 | Calibration Standard, C130 SMP 515-C-NDI 20-40-00 Probe Guide Set PDL 601-101 thru 109 | 1 | |
| PDL 624 | Calibration Standard, C130 SMP 515-C-NDI 20-40-00 Probe Guide Set PDL 624-101 thru 109 | 1 | |
| PDL601 | PROBE GUIDE SET | 1 | |
| PEN-3/THD-L00 | 1/4" Thread Probe, 50-500KHZ, w/Lemo 00 Socket, 3" Long | 1 | |
| PEN-3/THD-T | 1/4" Thread Probe, 50-500KHZ, w/ Triax Socket | 1 | |
| PEN-4.5/500K | PROBE - SURFACE, STRAIGHT, 500 KHZ FREQUENCY, FE/NFE,ABSOLUTE, SHIELDED, 4.50 IN. (114.3 MM) LONG, 0.130 IN.3.3 MM) TIP DIAMETER, (GENERAL ELECTRIC P/N 105P4FEQUIVALENT) | 1 | |
| PEN-4_5/500KL | PROBE - SURFACE, STRAIGHT, 50 KHZ TO 500 KHZ FREQUENCY RANGE, FE/NFE, ABSOLUTE, SHIELDED, 4.50 IN. (114.3 MM) LONG, 0.13 IN. (3.3 MM) TIP DIAMETER, (GEIT OR EQUIVALENT) | 1 | |
| PEN45-4 | SURFACE PENCIL PROBE, CRANKED 45 DEGREES TIP, 50-500 KHZ FREQUENCY, ABSOLUTE, SHIELDED, 0.125 IN. (3.3 MM) DIAMETER, 4.0 IN. (101.6 MM) LENGTH, 0.500 IN. (12.7 MM) TIP LENGTH, (TECHNANDT OR EQUIVALENT) | 1 | |
| PEN45-5 | 45 DEGREE SURFACE PROBE, 50 KHZ TO 500 KHZ FREQUENCY, ABSOLUTE, SHIELDED, 0.125 IN. (3.175 MM) TIP DIAMETER, 5.0 IN. (127.00 MM) LENGTH (TECHNA NDT OR EQUIVALENT) | 1 | |
| PEN45-6 | SURFACE PENCIL PROBE, CRANKED 45 DEGREES TIP, 50 KHZ TO 500 KHZ FREQUENCY, NFE/FE, ABSOLUTE, SHIELDED, 0.125 IN. (3.18 MM) TIP DIAMETER, 6.000 IN. (152.40 MM) LENGTH, 0.500 IN. (12.70 MM) TIP LENGTH, (TECHNA NDT OR EQUIVALENT) | 1 | |
| PEN475-4.5/500K | PROBE, 45 DEGREE, 50 KHZ TO 500 KHZ FREQUENCY RANGE, SHIELDED, ABSOLUTE FE/NFE, 0.13 IN. (3.3 MM) DIAMETER, 4.50 IN. (114.3 MM) LENGTH, 0.75 IN. (19.1 MM) TIP LENGTH, (GEIT OR EQUIVALENT) | 1 | |
| PEN475-4_5/500K | PROBE, 45 DEGREE, 50 KHZ TO 500 KHZ FREQUENCY RANGE, SHIELDED, ABSOLUTE FE/NFE, 0.13 IN. (3.3 MM) DIAMETER, 4.50 IN. (114.3 MM) LENGTH, 0.75 IN. (19.1 MM) TIP LENGTH, (GEIT OR EQUIVALENT) | 1 | |
| PEN903-4B | PROBE - 90 DEGREE WITH BEND HANDLE, 50 KHZ TO 500 KHZ FREQUENCY, SHIELDED, ABSOLUTE, 0.125 IN. (3.17 MM) TIP DIAMETER, 0.030 IN. (0.76 MM) DROP, 4.0 IN. (101.6 MM) LENGTH (TECHNA NDT OR EQUIVALENT) | 1 | |
| PEN92-5 | ABSOLUTE SHIELDED METAL SHAFT MICRODOT DETACHABLE PROBE PENCIL | 1 | |
| PEN925-4 | PROBE, 90 DEGREES, 50 KHZ TO 500 KHZ FREQUENCY, FE/NFE, ABSOLUTE, SHIELDED, 0.125 IN. (3.175 MM) DIAMETER, 4.0 IN. (101.6 MM) LENGTH, 0.250 IN. (6.35 MM) TIP LENGTH (TECHNA NDT OR EQUIVALENT). | 1 | |
| PEN925-4_5/500K-3/16 | PROBE - PENCIL, 90 DEGREES, 500KHZ FREQUENCY, FE/NFE ABSOLUTE, SHIELDED, 0.175 IN. (4.45 MM ) DIAMETER, 4.5 IN. ( 114.3 MM ) LONG, 0.25 IN. (6.4 MM ) TIP LENGTH. (GE OR EQUIVALENT) | 1 | |
| PEN925-6 | SURFACE PENCIL PROBE, 90 DEGREES TIP, 50-500 KHZ FREQUENCY, NFE/FE, ABSOLUTE, SHIELDED, 0.125 IN. (3.175 MM) DIAMETER, 6.0 IN. (152.4 MM) LENGTH, 0.250 IN. (6.35 MM) TIP LENGTH, (TECHNANDT OR EQUIVALENT) | 1 | |
| PEN94-4.5/10-50K | PROBE - PENCIL, 90 DEGREES, 30KHZ FREQUENCY, FE/NFE ABSOLUTE, SHIELDED, 0.120 IN. (3.0 MM ) DIAMETER, 4.48 IN. ( 114.0 MM ) LONG, 0.39 IN. (10.0 MM ) TIP LENGTH (ETHER NDE OR EQUIVALENT) | 1 | |
| PEN95-3/THD-L00 | 1/4" Thread Probe, 50-500KHZ, w/Lemo 00 Socket | 1 | |
| PEN95-3/THD-T | 1/4" Thread Probe, 50-500KHZ, w/ Triax Socket | 1 | |
| PEN95-6 | SURFACE PENCIL PROBE, 90 DEGREES TIP, 50-500 KHZ FREQUENCY, NFE/FE, ABSOLUTE, SHIELDED, 0.125 IN. (3.175 MM) DIAMETER, 6.0 IN. (152.4 MM) LENGTH, 0.500 IN. (12.7 MM) TIP LENGTH, (TECHNA NDT OR EQUIVALENT) | 1 | |
| PENFLX-1.75-1 | Special Surface Probe, copper flexshaft, .312 diameter handle, 1.75" long, 50-500KHz, Microdot | 1 | |
| PENFLX-2.5-1 | Special Surface Probe, copper flexshaft, .312 diameter handle, 2.5" long, 50-500KHz, Microdot | 1 | |
| PENFLX-7.87/500K | FLEXIBLE COPPER SHAFT PROBE - SURFACE, STRAIGHT, 500 KHZ FREQUENCY (ABSOLUTE), SHIELDED, 0.125 IN. (3.175 MM) DIAMETER, 7.87 IN. (200.0 MM) LONG (ETHER NDE OR EQUIVALENT). | 1 | |
| PENFLX639-7.87/500K | FLEXIBLE COPPER SHAFT PROBE - SURFACE, 60 DEGREES, 500 KHZ FREQUENCY (ABSOLUTE), SHIELDED, 0.125 IN. (3.175 MM) DIAMETER, 7.87 IN. (200.0 MM) LONG, 0.39 IN. (10.0 MM) TIP LENGTH (ETHER NDE OR EQUIVALENT) | 1 | |
| PENFLX915-2-1 | Special 90° Surface Probe, copper flexshaft, .312 diameter handle, 2" long, .15" Drop, 50-500KHz, Microdot | 1 | |
| PENFLX925-6 | SURFACE PENCIL PROBE, 90 DEGREE TIP, 50 KHZ TO 500 KHZ FREQUENCY, NFE/FE, ABSOLUTE, SHIELDED, 0.125 IN. (3.175 MM) DIAMETER, 6.0 IN. (152.4 MM) LENGTH, 0.250 IN. (6.35 MM) TIP LENGTH, (TECHNA NDT OR EQUIVALENT) | 1 | |
| PENFLX925-7.87/500K | FLEXIBLE COPPER SHAFT PROBE - SURFACE, 90 DEGREES, 500 KHZ FREQUENCY (ABSOLUTE), SHIELDED, 0.125 IN. (3.175 MM) DIAMETER, 7.87 IN. (200.0 MM) LONG, 0.25 IN. (6.35 MM) TIP LENGTH (ETHER NDE OR EQUIVALENT) | 1 | |
| PENFLX93-2-1 | Special 90° Surface Probe, copper flexshaft, .312 diameter handle, 2" long, .3" Drop, 50-500KHz, Microdot | 1 | |
| PENFLX95-5B | 1/8 Diameter, 90 deg, .5 drop, 5" long bend surface probe 50-500Khz, Microdot | 1 | |
| PENFLX95-6 | PROBE, 90 DEGREE, FREQUENCY RANGE 50-500 KHZ, NFE, SHIELDED, ABSOLUTE, 0.125 IN. (3.2 MM) TIP DIAMETER, 6.00 IN. (152.4 MM) LENGTH, 0.100 IN. (2.54 MM) DROP LENGTH, (TECHNA NDT OR EQUIVALENT) | 1 | |
| PENFLX95-8 | FLEXIBLE COPPER SHAFT PROBE - SURFACE, 90 DEGREE, 500 KHZ FREQUENCY, NFE, ABSOLUTE, SHIELDED, 0.125 IN. (3.175 MM) DIAMETER, 8.0 IN. (203.2 MM) LONG, 0.50 IN. (12.7 MM) TIP LENGTH, (OLYMPUS OR EQUIVALENT) | 1 | |
| PENFLX975-16/500K | FLEXIBLE SURFACE PENCIL PROBE, 90 DEGREE, 200 KHZ-1 MHZ FREQUENCY, NFE/FE, ABSOLUTE, SHIELDED, 0.125 IN. (3.175 MM) DIAMETER, 16 IN. (406.4 MM) LENGTH, 0.750 IN (19.05 MM) TIP LENGTH OR EQUIVALENT (TECHNA NDT OR EQUIVALENT) | 1 | |
| PENSS-1.5/2M | Straight Surface Probe, Ø.125" tip x 1.5" long, 1-3MHz, Microdot, 1" SS x .25 diameter handle | 1 | |
| PFS001 | SLIDING PROBE, 400 HZ TO 50 KHZ FREQUENCY, REFLECTION, 0.79 IN. (20.0 MM) WIDE BY 1.97 IN. (50.0 MM) LONG, (ETHER NDE OR EQUIVALENT) | 1 | |
| PKA-27H-1359 | LFEC PROBE- ABSOLUTE SHIELDED - 2 KHZ - 20 KHZ, 30 DEG BEND, 0.236" DIA. TIP, 0.63" DROP. 4 PIN FISCHER SOCKET. | 4 | |
| PKA195 | CYLINDRICAL PROBE-ABSOLUTE, FOCUSED DIAMETER PROBE = 9.5 MM (0.374 IN.) FREQUENCY RANGE 100 HZ-10 KHZ | 3 | |
| PKA27H1359 | ET HF PROBE | 4 | |
| POW3LS01 | POWER PROBE 3 W LEAD SET | 1 | |
| POWLS01 | PWRPROBE GOLD SERIES LEAD SET | 1 | |
| PROBE | PROBE - NON METALLIC, FLEXIBLE | 1 | |
| PROBE GUIDE S41-G1A | BOEING PROBE GUIDE. MATERIAL: POLYETHYLENE or EQUIVALENT. | 1 | |
| PROBE GUIDE S41-G1B | BOEING PROBE GUIDE. MATERIAL: POLYETHYLENE or EQUIVALENT. | 1 | |
| PROBE GUIDE S43-G1A,G1B, G1C | BOEING PROBE GUIDE. MATERIAL: POLYETHYLENE or EQUIVALENT. | 1 | |
| PROBE, FLEX | PROBE - NON METALLIC, FLEXIBLE, DIA LESS TH 5MM | 1 | |
| PS030PR064-114N | PROBE - PENCIL, 90 DEGREES, 30KHZ FREQUENCY, FE/NFE ABSOLUTE, SHIELDED, 0.120 IN. (3.0 MM ) DIAMETER, 4.48 IN. ( 114.0 MM ) LONG, 0.39 IN. (10.0 MM ) TIP LENGTH (ETHER NDE OR EQUIVALENT) | 1 | |
| PS60-2R | FUEL PROBE TEST SET (HEAVY MAINTENANCE/SNAGS) | 1 | |
| PSA-8 | DWYER SERIES 477B MANOMETER AND STATIC PROBE COM - 13641 | 1 | |
| PSD30-2AF | FUEL QTY PROBE TEST SET | 5 | |
| PSD40*1 | FUEL QTY PROB TEST SET | 9 | |
| PSD40-1 | Fuel Qty Probe Test Set | 9 | |
| PSD40-11 | FUEL QTY PROBE TEST SET | 1 | |
| PSD60-1 | FUEL QTY PROBE TEST SET | 2 | |
| PSD60-1AF | FUEL QTY PROBE TEST SET | 5 | |
| PSD60-2 | Fuel Qty Probe Test Set | 5 | |
| PSD60-2R | Fuel Qty Probe Test Set | 27 | |
| PSDAF-105 | ADAPTER SET, TEST SET, FUEL TANK PROBES | 3 | |
| PSM-5 | PROBETA PATRÓN PSM-5 | 7 | |
| PSM-5-G | PROBETA PATRÓN PSM-5 | 2 | |
| PSM-5-G-PHOTO | PROBETA PATRÓN PSM-5 | 1 | |
| PSM-5-P-PHOTO | PROBETA PATRÓN PSM-5 | 1 | |
| PT.24 | SUFACE PROBE 90° DEGREES .063" DROP .100"Ø SHAFT DIAMETER BENT 15° DEGREES, 10.0" LONG WITH TRIAX FISCHER CONNECTOR. FREQUENCY 500KHz-2MHz. Includes Test Report and Certificate of Conformance. | 1 | |
| PT.53 | LOW FREQUENCY REFLECTION SPOT PROBE .750"Ø DIAMETER, 2.0" TALL WITH TRIAX FISCHER CONNECTOR. 100Hz-10KHz. Includes Test Report and Certificate of Conformance. | 1 | |
| PT05679 | PROBE EXTENSION CABLE (6 FEET). | 1 | |
| PTP38 | PROBE - MULTIMETER, INSULATED, SLIM REACH | 1 | |
| PU001V1 | PROBE - PENCIL, 3KHZ FREQUENCY, NFE/FE, REFLECTION, SHIELDED, 45 DEGREE, 0.315 IN. (8.0 MM) DIAMETER, 4.500 IN. (114.0 MM) LONG, 0.500 IN. (12.70 MM) TIP LENGTH (ETHER NDE OR EQUIVALENT) | 1 | |
| PUS13 | REFLECTION SPOT PROBE ACETAL BODY, 200HZ-200KHZ, .511"Ø (13.0MM)OD, 1.5" LONG STRAIGHT (TOP MOUNT TR | 1 | |
| PV038-01 | FLEXIBLE COPPER SHAFT PROBE - SURFACE, STRAIGHT, 500 KHZ FREQUENCY (ABSOLUTE), SHIELDED, 0.125 IN. (3.175 MM) DIAMETER, 7.87 IN. (200.0 MM) LONG (ETHER NDE OR EQUIVALENT). | 1 | |
| PV038-02 | FLEXIBLE COPPER SHAFT PROBE - SURFACE, 90 DEGREES, 500 KHZ FREQUENCY (ABSOLUTE), SHIELDED, 0.125 IN. (3.175 MM) DIAMETER, 7.87 IN. (200.0 MM) LONG, 0.25 IN. (6.35 MM) TIP LENGTH (ETHER NDE OR EQUIVALENT) | 1 | |
| PV038-03 | FLEXIBLE COPPER SHAFT PROBE - SURFACE, 60 DEGREES, 500 KHZ FREQUENCY (ABSOLUTE), SHIELDED, 0.125 IN. (3.175 MM) DIAMETER, 7.87 IN. (200.0 MM) LONG, 0.39 IN. (10.0 MM) TIP LENGTH (ETHER NDE OR EQUIVALENT) | 1 | |
| PWA 101042A | PROBE: 767 LP 1.6 COMPLETE FAN BLADE KIT | 1 | |
| PWA 103780 | MAGNETIC PROBE | 1 | |
| PWA 45236 | INLET PRESS PROBE | 1 | |
| PWA 45256 | INLET PRESSURE PROBES WITH TUBES | 1 | |
| PWA101042A | PROBE: 767 LP 1.6 COMPLETE FAN BLADE KIT | 1 | |
| PWA101498 | PROBE MAGNETIC SB | 1 | |
| PWA102283 | P.495 PROBES LEAK DETECTOR | 6 | |
| PWA12116E | PT2 INLET PROBES | 1 | |
| PWA45256 | INLET PRESSURE PROBES WITH TUBES | 1 | |
| PWA75909 | ENGINE BLADE PROBE, DIFFERENTIAL 1-4 MHz, ATTACHED CABLE 6.0' FEET LONG WITH 16 PIN LEMO CONNECTOR FOR NOTEC SERIES INSTRUMENTS. DIFFERENTIAL 1-4 MHz. Includes Test Report and Certificate of Conformance. | 3 | |
| PWC30114-08 | WRENCH - T5 THERMOCOUPLE PROBE RETAINING NUT | 6 | |
| PWC66956 | Plug-Probe Set (5 Pieces) | 1 | |
| QCT-161-6M-DSU | E/C Pocket Probe | 1 | |
| QCT-162-6M-DSU | E/C Pocket Probe | 1 | |
| RADIUS PROBE | RADIUS PROBE SET OF 0.030, 0.020, 0.015 AND 0.005 | 1 | |
| RCSM70-4 | US PROBE–METALSCAN 70°-4 MHZ USE FOR MASTERSCAN330 | 1 | |
| RDP.6-.33/500H | RING DONUT PROBE, 500 HZ TO 20 KHZ FREQUENCY, REFLECTION ABSOLUTE, SHIELDED, 0.335 IN (8.51 MM) INTERNAL DIAMETER AND 0.600 IN (15.24 MM) EXTERNAL DIAMETER (OLYMPUS NDT OR EQUIVALENT) | 1 | |
| RDP.75-.33/250H-40K | PROBE, RING, (DONUT) 250HZ - 40KHZ FREQUENCY RANGE, 0.33 IN (8.4 MM) INTERNAL DIAMETER, 0.75 IN (19.0 MM) EXTERNAL DIAMETER | 1 | |
| RDP1.0-100H-5-4F | ENCIRCLING PROBE, 16MM DIAMETER. 50HZ-3KHZ | 1 | |
| RDP1.1-.65/200H | Reflection Ring Probe 1.0 ID .65 OD 200Hz-720Hz 0.80 -1.0" Height penetrate .290 AL | 1 | |
| RDP1.2-100H-5-4F | ENCIRCLING PROBE, 12MM DIAMETER. 50HZ-3KHZ | 1 | |
| RDP1.25-.75/300H | Reflection Ring Probe, outer diameter 1.25", Inner Diameter 0.75", Max Height 1.5" 300Hz-800Hz Center freq. 500Hz | 2 | |
| RDP1.4-.85-200H | REFLECTION RING PROBE, OUTER DIAMETER 1.40, INNER DIAMETER .85, MAX HEIGHT 1.75, CENTER FREQ 200HZ 100-500HZ | 1 | |
| RDP1.40-.85-200H | Reflection Ring Probe, outer diameter 1.40, inner diameter .85, Max Height 1.75, center freq 200Hz 100-500Hz | 1 | |
| REDDY-32M | EDDY CURRENT TEST SET WITH PROBES | 1 | |
| RH520B | HUMIDITY/TEMPERATURE PAPERLESS RECORDER; DETACHABLE PROBE | 1 | |
| RLP-UR101GT-.187-0.218 | ROTATING PROBE FOR HFEC TESTING ON RIVET HOLE DIAMETER 0.187"-0.218" | 1 | |
| RLP-UR101GT-.312-0.375 | ROTATING PROBE FOR HFEC TESTING ON RIVET HOLE DIAMETER 0.312"-0.375" | 1 | |
| RPD.8/.4-200H | PROBE ( INNER DIAMETER . 10MM, 250-750 HZ) (GTECHNA NDT) | 1 | |
| RPD_8/_4-200H | PROBE ( INNER DIAMETER . 10MM, 250-750 HZ) (GTECHNA NDT) | 1 | |
| RR.090 | Rechii Scanner Probe, Spread End, .090" Diameter, 1.1" WL 100KHz - 2MHz | 1 | |
| RR.090SE | Rechii Scanner Probe, Spread End, .090" Diameter, 1.1" WL 100KHz - 2MHz | 1 | |
| RR.090SS | Rechii Scanner Probe, Stainless Steel .090" Diameter, 1.1" WL 100KHz - 2MHz, Stainless Steel | 1 | |
| RR.125 | Rechii Scanner Probe, Spread End, .125" Diameter, 1.5" WL 100KHz - 2MHz | 1 | |
| RR.125SE | Rechii Scanner Probe, Spread End, .125"-.156" Diameter, 1.5" WL 100KHz - 2MHz | 1 | |
| RR.125SE/1.1WL | Rechii Scanner Probe, Spread End, .125"-.156" Diameter, 1.1" WL 100KHz - 2MHz | 1 | |
| RR.125SS | Rechii Scanner Probe, Stainless Steel .125" (1/8") Diameter, 1.5" WL 100KHz - 2MHz | 1 | |
| RR.125SS/1.1WL | Rechii Scanner Probe, Stainless Steel .125" (1/8") Diameter, 1.1" WL 100KHz - 2MHz | 1 | |
| RR.156SE | Rechii Scanner Probe, Spread End, .156"-.187" Diameter, 1.5" WL 100KHz - 2MHz | 1 | |
| RR.156SE/1.1WL | Rechii Scanner Probe, Spread End, .156"-.187" Diameter, 1.1" WL 100KHz - 2MHz | 1 | |
| RR.156SE/2WL | Rechii Scanner Probe, Spread End, .156"-.187" Diameter, 2.0" WL, 100KHz-2MHz | 1 | |
| RR.156SS | Rechii Scanner Probe, Stainless Steel .156" (5/32") Diameter, 1.5" WL 100KHz - 2MHz | 1 | |
| RR.156SS/1.1WL | Rechii Scanner Probe, Stainless Steel .156" (5/32") Diameter, 1.1" WL 100KHz - 2MHz | 1 | |
| RR.187SE | Rechii Scanner Probe, Spread End, .187"-.218" Diameter, 1.5" WL 100KHz - 2MHz | 1 | |
| RR.187SE/1.1WL | Rechii Scanner Probe, Spread End, .187"-.218" Diameter, 1.1" WL 100KHz - 2MHz | 1 | |
| RR.187SS | Rechii Scanner Probe, Stainless Steel .187" (3/16") Diameter, 1.5" WL 100KHz - 2MHz | 1 | |
| RR.187SS/1.1WL | Rechii Scanner Probe, Stainless Steel .187" (3/16") Diameter, 1.1" WL 100KHz - 2MHz | 1 | |
| RR.187SS/2WL | Rechii Scanner Probe, Stainless Steel .187" (3/16") Diameter, 2" WL 100KHz - 2MHz | 1 | |
| RR.201SS | Rechii Scanner Probe, Stainless Steel .201" Diameter, 1.5" WL 100KHz - 2MHz | 1 | |
| RR.218SE | Rechii Scanner Probe, Spread End, .218"-.250" Diameter, 1.5" WL 100KHz - 2MHz | 1 | |
| RR.218SE/1.1WL | Rechii Scanner Probe, Spread End, .218"-.250" Diameter, 1.1" WL, 100KHz-2MHz | 1 | |
| RR.218SE/2WL | Rechii Scanner Probe, Spread End, .218"-.250" Diameter, 2" WL, 100KHz-2MHz | 1 | |
| RR.218SS | Rechii Scanner Probe, Stainless Steel .218" (7/32") Diameter, 1.5" WL 100KHz - 2MHz | 1 | |
| RR.218SS/1.1WL | Rechii Scanner Probe, Stainless Steel .218" (7/32") Diameter, 1.1" WL 100KHz - 2MHz | 1 | |
| RR.234SS/1.1WL | Rechii Scanner Probe, Stainless Steel .234" (15/64") Diameter, 1.1" WL 100KHz - 2MHz | 1 | |
| RR.250SE | Rechii Scanner Probe, Spread End, .250"-.281" Diameter,1.5" WL 100KHz - 2MHz | 1 | |
| RR.250SE/1.1WL | Rechii Scanner Probe, Spread End, .250"-.281" Diameter, 1.1" WL 100KHz - 2MHz | 1 | |
| RR.250SE/2WL | Rechii Scanner Probe, Spread End, .250"-.281" Diameter, 2" WL 100KHz - 2MHz | 1 | |
| RR.250SS | Rechii Scanner Probe, Stainless Steel .250" (1/4") Diameter, 1.5" WL 100KHz - 2MHz | 1 | |
| RR.250SS/1.1WL | Rechii Scanner Probe, Stainless Steel .250" (1/4") Diameter, 1.1" WL 100KHz - 2MHz | 1 | |
| RR.281SE | Rechii Scanner Probe, Spread End, .281"-.312" Diameter, 1.5" WL 100KHz - 2MHz | 1 | |
| RR.312SE | Rechii Scanner Probe, Spread End, .312"-.375" Diameter, 2.0" WL 100KHz - 2MHz | 1 | |
| RR.312SE/1.1WL | Rechii Scanner Probe, Spread End, .312"-.375" Diameter, 1.1" WL 100KHz - 2MHz | 1 | |
| RR.312SE/1.5WL | Rechii Scanner Probe, Spread End, .312"-.375" Diameter, 1.5" WL 100KHz - 2MHz | 1 | |
| RR.312SS | Rechii Scanner Probe, Stainless Steel .312" (5/16") Diameter, 2.0" WL 100KHz - 2MHz | 1 | |
| RR.312SS/1.1WL | Rechii Scanner Probe, Stainless Steel .312" (5/16") Diameter, 1.1" WL 100KHz - 2MHz | 1 | |
| RR.312SS/1.5WL | Rechii Scanner Probe, Stainless Steel .312" (5/16") Diameter, 1.5" WL 100KHz - 2MHz | 1 | |
| RR.375SE | Rachitic Scanner Probe, Spread End, .375"-.437" Diameter, 2" WL 100KHz - 2MHz | 1 | |
| RR.375SE/1.1WL | Rechii Scanner Probe, Spread End, .375"-.437" Diameter, 1.1" WL 100KHz - 2MHz | 1 | |
| RR.375SE/1.5WL | Rechii Scanner Probe, Spread End, .375"-.437" Diameter, 1.5" WL 100KHz - 2MHz | 1 | |
| RR.375SS | Rechii Scanner Probe, Stainless Steel .375" (3/8") Diameter, 2.0" WL 100KHz - 2MHz | 1 | |
| RR.375SS/1.1WL | Rechii Scanner Probe, Stainless Steel .375" (3/8") Diameter, 1.1" WL 100KHz - 2MHz | 1 | |
| RR.375SS/1.5WL | Rechii Scanner Probe, Stainless Steel .375" (3/8") Diameter, 1.5" WL 100KHz - 2MHz | 1 | |
| RR.406SS | Rechii Scanner Probe, Stainless Steel .406" 13/32") Diameter, 2.0" WL 100KHz - 2MHz | 1 | |
| RR.421SS/1.5WL | Rechii Scanner Probe, Stainless Steel .421" (27/64") Diameter, 1.5" WL 100KHz - 2MHz | 1 | |
| RR.437SE/1.1WL | Rechii Scanner Probe, Spread End, .437"-.500" Diameter, 1.1" WL 100KHz - 2MHz | 1 | |
| RR.437SE/1.5WL | Rechii Scanner Probe, Spread End, .437"-.500" Diameter, 1.5" WL 100KHz - 2MHz | 1 | |
| RR.437SS | Rechii Scanner Probe, Stainless Steel .437" (7/16") Diameter, 2.0" WL 100KHz - 2MHz | 1 | |
| RR.437SS/1.1WL | Rechii Scanner Probe, Stainless Steel .437" (7/16") Diameter, 1.1" WL 100KHz - 2MHz | 1 | |
| RR.437SS/1.5WL | Rechii Scanner Probe, Stainless Steel .437" (7/16") Diameter, 1.5" WL 100KHz - 2MHz | 1 | |
| RR.456SS | Rechii Scanner Probe, Stainless Steel .456" Diameter, 2.0" WL 100KHz - 2MHz | 1 | |
| RR.458SS | Rechii Scanner Probe, Stainless Steel .458" Diameter, 2.0" WL 100KHz - 2MHz | 1 | |
| RR.484SS/1.5WL | Rechii Scanner Probe, Stainless Steel .484" (31/64") Diameter, 1.5" WL 100KHz - 2MHz | 1 | |
| RR.500SE | Rechii Scanner Probe, Spread End, .500"-.562" Diameter, 2" WL 100KHz - 2MHz | 1 | |
| RR.500SE/1.1WL | Rechii Scanner Probe, Spread End, .500"-.562" Diameter, 1.1" WL 100KHz - 2MHz | 1 | |
| RR.500SE/1.5WL | Rechii Scanner Probe, Spread End, .500"-.562" Diameter, 1.5" WL 100KHz - 2MHz | 1 | |
| RR.500SS | Rechii Scanner Probe, Stainless Steel .500" (1/2") Diameter, 2.0" WL 100KHz - 2MHz | 1 | |
| RR.500SS/1.1WL | Rechii Scanner Probe, Stainless Steel .500" (1/2") Diameter, 1.1" WL 100KHz - 2MHz | 1 | |
| RR.500SS/1.5WL | Rechii Scanner Probe, Stainless Steel .500" (1/2") Diameter, 1.5" WL 100KHz - 2MHz | 1 | |
| RR.546SS/1.5WL | Rechii Scanner Probe, Stainless Steel .546" (35/64") Diameter, 1.5" WL 100KHz - 2MHz | 1 | |
| RR.562SE | Rechii Scanner Probe, Spread End, .562"-.625" Diameter, 2" WL 100KHz - 2MHz | 1 | |
| RR.562SE/1.1WL | Rechii Scanner Probe, Spread End, .562"-.625" Diameter, 1.1" WL 100KHz - 2MHz | 1 | |
| RR.562SE/1.5WL | Rechii Scanner Probe, Spread End, .562"-.625" Diameter, 1.5" WL 100KHz - 2MHz | 1 | |
| RR.562SS | Rechii Scanner Probe, Stainless Steel .562" (9/16") Diameter, 2.0" WL 100KHz - 2MHz | 1 | |
| RR.625SE | Rechii Scanner Probe, Spread End, .625-.687" Diameter, 2" WL 100KHz - 2MHz | 1 | |
| RR.625SE/1.1WL | Rechii Scanner Probe, Spread End, .625-.687" Diameter, 1.1" WL 100KHz - 2MHz | 1 | |
| RR.625SE/1.5WL | Rechii Scanner Probe, Spread End, .625-.687" Diameter, 1.5" WL 100KHz - 2MHz | 1 | |
| RR.625SS | Rechii Scanner Probe, Stainless Steel .625" (5/8") Diameter, 2.0" WL 100KHz - 2MHz | 1 | |
| RR.625SS/1.1WL | Rechii Scanner Probe, Stainless Steel .625" (5/8") Diameter, 1.1" WL 100KHz - 2MHz | 1 | |
| RR.625SS/1.5WL | Rechii Scanner Probe, Stainless Steel .625" (5/8") Diameter, 1.5" WL 100KHz - 2MHz | 1 | |
| RR.687SE | Rechii Scanner Probe, Spread End, .687"-.750" Diameter, 2" WL 100KHz - 2MHz | 1 | |
| RR.687SE/1.1WL | Rechii Scanner Probe, Spread End, .687"-.750" Diameter, 1.1" WL 100KHz - 2MHz | 1 | |
| RR.687SE/1.5WL | Rechii Scanner Probe, Spread End, .687"-.750" Diameter, 1.5" WL 100KHz - 2MHz | 1 | |
| RR.750SE | Rechii Scanner Probe, Spread End, .750"-.812" Diameter, 2" WL 100KHz - 2MHz | 1 | |
| RR.750SE/1.1WL | Rechii Scanner Probe, Spread End, .750"-.812" Diameter, 1.1" WL 100KHz - 2MHz | 1 | |
| RR.750SS | Rechii Scanner Probe, Stainless Steel .750" (3/4") Diameter, 2.0" WL 100KHz - 2MHz | 1 | |
| RR.750SS/1.5WL | Rechii Scanner Probe, Stainless Steel .750" (3/4") Diameter, 1.5" WL 100KHz - 2MHz | 1 | |
| RR.812SE | Rechii Scanner Probe, Spread End, .812"-.875" Diameter, 2" WL 100KHz - 2MHz | 1 | |
| RR.859SS/1.5WL | Rachii Scanner Probe, Stainless Steel .859" (55/64") Diameter, 1.5" WL 100KHz - 2MHz | 1 | |
| RR.875SE | Rechii Scanner Probe, Spread End, .875" Diameter, 2" WL 100KHz - 2MHz | 1 | |
| RR.875SS | Rechii Scanner Probe, Stainless Steel .875" (7/8") Diameter, 2.0" WL 100KHz - 2MHz | 1 | |
| RR.937SE | Rechii Scanner Probe, Spread End, .937" Diameter, 2" WL 100KHz - 2MHz | 1 | |
| RR0110-5-4F | ENCIRCLING PROBE, 16MM DIAMETER. 50HZ-3KHZ | 1 | |
| RR0110-5/4F | ENCIRCLING PROBE, 16MM DIAMETER. 50HZ-3KHZ | 1 | |
| RR0112-5/4F | ENCIRCLING PROBE, 12MM DIAMETER. 50HZ-3KHZ | 1 | |
| RR1.062SE | Rechii Scanner Probe, Spread End, 1.062" Diameter, 2" WL 100KHz - 2MHz | 1 | |
| RR1.0SE | Rechii Scanner Probe, Spread End, 1.0" Diameter, 2" WL 100KHz - 2MHz | 1 | |
| RR1.0SS | Rechii Scanner Probe, Stainless Steel 1.0" Diameter, 2.0" WL 100KHz - 2MHz | 1 | |
| RR1.125SE | Rechii Scanner Probe, Spread End, 1.125" Diameter, 2" WL 100KHz - 2MHz | 1 | |
| RR1.187SE | Rechii Scanner Probe, Spread End, 1.187" Diameter, 2" WL 100KHz - 2MHz | 1 | |
| RR1.250SE | Rechii Scanner Probe, Spread End, 1.250" Diameter, 2" WL 100KHz - 2MHz | 1 | |
| RR207-1 | RING DONUT PROBE, 500 HZ TO 20 KHZ FREQUENCY, REFLECTION ABSOLUTE, SHIELDED, 0.335 IN (8.51 MM) INTERNAL DIAMETER AND 0.600 IN (15.24 MM) EXTERNAL DIAMETER (OLYMPUS NDT OR EQUIVALENT) | 1 | |
| RRF.875SE | Rechii Scanner Probe, Spread End, .875" Diameter, 2" WL 100KHz - 2MHz, Shielded | 1 | |
| RRF1.0SE | Rechii Scanner Probe, Spread End, 1.0" Diameter, 2" WL 100KHz - 2MHz, Shielded | 1 | |
| RRF1.125SE | Rechii Scanner Probe, Spread End, 1.125" Diameter, 2" WL 100KHz - 2MHz, Shielded | 1 | |
| RRF1.250SE | Rechii Scanner Probe, Spread End, 1.25" Diameter, 2" WL 100KHz - 2MHz, Shielded | 1 | |
| RRF1.375SE | Rechii Scanner Probe, Spread End, 1.375" Diameter, 2" WL 100KHz - 2MHz, Shielded | 1 | |
| RRF1.500SE | Rechii Scanner Probe, Spread End, 1.500" Diameter, 2" WL 100KHz - 2MHz, Shielded | 1 | |
| RRKIT-108SE | PROBE SET,EDDY CURRENT | 1 | |
| RRY.187-.250/2WL | Rechii Y Probe, .187" (3/16) - .250" (1/4) Diameter, 100KHz-2MHz, 2" WL | 1 | |
| RRY.625-.687SS | Rechii Y Probe,.625" - .687" Diameter, 100KHZ-2MHz, Stainless Steel 2"WL | 1 | |
| RRY.687-.750SS | Rechii Y Probe, .687"-.750" Diameter, 100KHZ-2MHz, Stainless Steel 2"WL | 1 | |
| RS1005-2-TF | SMALL DIAMETER LFEC PROBE(0.50") | 2 | |
| RS1005-2/TF | SMALL DIAMETER LFEC PROBE(0.50") | 2 | |
| RS203-1/TF | ET PROBE | 1 | |
| RS50 | ET PROBE | 1 | |
| RS50/64 | DIAMETER 6.4 MM (1/4 INCH ) PROBE | 2 | |
| RSK50/5/12/6.4/100 | DIAMETER 6.4 PROBE | 1 | |
| RSM4-7-35 | OLYMPUS ROTATING PROBE (RSM4-7-35), DIAMETER OF 4.7 MM (0.185 IN) X 35 MM (1.378 IN) IN LENGTH. | 1 | |
| RSM6-3-35 | OLYMPUS ROTATING PROBE (RSM6-3-35), DIAMETER OF 6.3 MM (0.248 IN) X 35 MM (1.378 IN) IN LENGTH. | 1 | |
| S-PC-P11 | RESISTANCE PROBE BONDING METERS | 1 | |
| S-PC-P13 | RESISTANCE PROBE BONDING METERS | 1 | |
| S1505 | S1505;HST-3000 Safety Clips Set wtih 2 Alligator - 8 Test Probes | 1 | |
| S5 | S5 SONDICATOR BOND TESTER WITH SP3L PROBE, ZETEC | 1 | |
| SA-605T | NDT PROBES 5 MHZ WITH A 0.187 INCH (4.75 MM) DIAMETER CRYSTAL | 2 | |
| SA-EMZ | Scanner Adaptor, Rohmann Mini Scanner to Zetec probe | 1 | |
| SA-HZ | Rotary Adaptor, Hocking scanner to Zetec MZ-20 Probe, for old style Zetec probes | 1 | |
| SA-UZ | Rotary Adaptor, Universal scanners to Zetec MZ-20 Probe, for old style Zetec probes | 1 | |
| SB.3-5K | Bridge Spot Probe, 5-20Khz, .3" Diameter, w/ Triax connector | 1 | |
| SB.375/100H-2K/4F | PROBE, SPOT FACE, BRIDGE, FREQ. 100 HZ TO 2 KHZ, 4F‐FISHER CONNECTOR, DIAMETER 0.375 IN | 1 | |
| SB.4-100H | Bridge Spot Probe, 100Hz-1KHZ, .4" Diameter, w/ Triax connector | 1 | |
| SB.4-1K | Bridge Spot Probe, 1-10KHZ, .4" Diameter, w/ Triax connector | 1 | |
| SB.4-1K-1 | Bridge Spot Probe, 1-10KHZ, .4" Diameter, w/ Triax connector | 1 | |
| SB.4-50H | Bridge Spot Probe, 50-500HZ, .4" Diameter, w/ Triax connector | 1 | |
| SB.4-5K | Bridge Spot Probe, 5-20Khz, .4" Diameter, w/ Triax connector | 1 | |
| SB.5-1K | Bridge Spot Probe, 1-10KHZ, .5" Diameter, w/ Triax connector | 1 | |
| SB.7-100H | Bridge Spot Probe .700 Diameter, 100Hz-1KHZ, Triax Connector | 1 | |
| SBE2080 | ICE DETECTOR PROBE PROTECTOR (OLD) | 1 | |
| SCR.135-S/6 | EC Probe .135 diameter, split core recessed, 6 Mhz | 1 | |
| SCR.169-S/6 | EC Probe .169 diameter, split core recessed, 6 Mhz | 1 | |
| SCR.189-S/6 | EC Probe .189 diameter, split core recessed, 6 Mhz | 1 | |
| SCR.220-S/6 | EC Probe .220 diameter, split core recessed, 6 Mhz | 1 | |
| SCR.225-S/6 ELB | EC Probe .225 diameter, split core recessed, 6 Mhz, Extra Long Barrel (1.75) | 1 | |
| SCR.239-S/6 | EC Probe .239 diameter, split core recessed, 6 Mhz | 1 | |
| SCR.239-S/6 ELB | EC Probe .239 diameter, split core recessed, 6 Mhz, Extra Long Barrel (1.75) | 1 | |
| SCR.245-S/6 | EC Probe .245 diameter, split core recessed, 6 Mhz | 1 | |
| SCR.254-S/6 | EC Probe .254 diameter, split core recessed, 6 Mhz | 1 | |
| SCR.270-S/6 | EC Probe .270 diameter, split core recessed, 6 Mhz | 1 | |
| SCR.295-S/6 | EC Probe .295 diameter, split core recessed, 6 Mhz | 1 | |
| SCR.307-S/6 | EC Probe .307 diameter, split core recessed, 6 Mhz | 1 | |
| SCR.307-S/6 ELB | EC Probe .307 diameter, split core recessed, 6 Mhz, Extra Long Barrel (1.75) | 1 | |
| SCR.328-S/6 | EC Probe .328 diameter, split core recessed, 6 Mhz | 1 | |
| SCR.340-S/6 | EC Probe .340 diameter, split core recessed, 6 Mhz | 1 | |
| SCR.374-S/6 | EC Probe .374 diameter, split core recessed, 6 Mhz | 1 | |
| SCR.389-S/6 | EC Probe .389 diameter, split core recessed, 6 Mhz | 1 | |
| SCR.475-S/6 | EC Probe .475 diameter, split core recessed, 6 Mhz | 1 | |
| SCR.749-S/6 ELS | .749" Diameter, EC Probe | 1 | |
| SCRT.749-S/6 ELS | .749" Diameter, Triangle Head, EC Probe | 1 | |
| SCRT.912-S/6 | .912" Diameter, Triangle Head, EC Probe | 1 | |
| SCRT.912-S/6 ELS | .912" Diameter, Triangle Head, EC Probe | 1 | |
| SDP.3-1K-4L | SPOT PROBE, 800 HZ -10 KHZ FREQUENCY, REFLECTION, 0.313 IN. (7.95 MM) DIAMETER, 1.343 IN. (34.12 MM) LENGTH, 0.915 IN. (23.25 MM) DROP (TECHNA NDT OR EQUIVALENT). | 1 | |
| SDP.35-20K | Reflection Spot Probe, .35"Diameter, w/ Triax connector 20K | 1 | |
| SDP.35-500H-1 | Reflection Spot Probe, 500Hz-10KHZ, .35" Diameter, w/ Triax connector | 1 | |
| SDP.35-500H-4F | Reflection Spot Probe,500Hz-2KHz, .35" Diameter, w/ 4-pin Fischer | 1 | |
| SDP.35-500H-7 | Reflection Spot Probe, 500Hz-10KHZ, .35" Diameter, w/ Triax connector | 1 | |
| SDP.35/20-50K | Reflection Spot Probe, .35"Diameter, w/ Triax connector 20-50K | 1 | |
| SDP.4-500H | Reflection Spot Probe, 500Hz to 2kHz freq.,reflection, 0.40" (10.16mm) diameter | 1 | |
| SDP.4-50H-4L | SPOT FACE PROBE, 50 HZ TO 2 KHZ FREQUENCY, 0.400 IN. (10.16 MM) DIAMETER, 0.910 IN. (23.11 MM) HEIGHT, REFLECTION, SHIELDED, (TECHNA NDT OR EQUIVALENT) | 1 | |
| SDP.5-10K-2 | Reflection Spot Probe, 5-80KHZ, .5" Diameter, w/ Triax connector | 1 | |
| SJ30-231 | TAT PROBE COVERS, heat resistant type (set of 2) | 1 | |
| SNG 0-375/3L/25K | PROBE, HFEC – 0.30" DIAMETER | 1 | |
| SP3L | SONDICATOR PROBE (FOR ULTRASOUND) 1.25-IN SONDICATOR CONTACT PROBE WITH 1/2-IN SPACING REPLACEABLE TORLON PROBE TIPS, 2-PIECE PLASTIC ELEMENTS,AND ALARM INDICATING LIGHT FOR USE WITH S-21R & MIZ-21SR INSTRUMENTS. 8 FT CABLE LENGTH. (MADE BY ZETEC INC.) | 1 | |
| SP867013 | SCANNER PROBE KIT SPO-5965 (SET OF 14 PROBES WITH CASE) | 1 | |
| SPC-304 R/FE | PENCIL PROBE,REQUENCY RANGE OF 4 KHZ - 100KHZ, 0.185 IN. (4.70 MM) DIAMETER, 0.500 IN. (12.70 MM) DROP, CRANKED, 90°, REFLECTION,NDT06-53-20-70-250-802 | 1 | |
| SPD.125-200K | Spring Loaded Probe, .125" Diameter, 50-500KHz, Triax | 1 | |
| SPD.125-500K | Spring Loaded Probe, .125" Diameter, 200KHz-1MHz, Triax Connector | 1 | |
| SPD.25-200K | Spring Loaded Probe, .250" Diameter, 50-500KHz, Triax | 1 | |
| SPD.307-200K-Z | Spring Loaded Probe, .307" Diameter, 50-500KHz, Hard wire 6ft to 4-Pin Cannon | 1 | |
| SPD.375-25K | PROBE, HFEC – 0.30" DIAMETER | 1 | |
| SPEN92-5 | PROBE, 90 DEGREES, 50 KHZ TO 500 KHZ FREQUENCY, SHIELDED, ABSOLUTE, NFE, 0.062 IN. (1.57 MM) DIAMETER, (TECHNANDT OR EQUIVALENT) | 1 | |
| SPEN95-6/2M | ET SURFACE PROBE TIP ANGLE 90 DEGREE FREQUENCY 1MHZ-3MHZ | 1 | |
| SPENFLX 91-10 | PROBE, 90 DEGREE, FREQUENCY RANGE 50-500 KHZ, NFE, SHIELDED, ABSOLUTE, 0.072 IN. (1.8 MM) TIP DIAMETER, 10.00 IN. (254 MM) LENGTH, 0.100 IN. (2.54 MM) DROP LENGTH, (TECHNA NDT OR EQUIVALENT) | 1 | |
| SPENFLX-10/2M | PROBE, STRAIGHT FLEXIBLE SURFACE PENCIL, FREQUENCY RANGE 1 - 3 MHZ, FE/NFE, SHIELDED, ABSOLUTE, 0.072 IN. (1.83 MM) TIP DIAMETER, 10.00 IN. (254 MM) LENGTH, 0.500 IN. (12.7 MM) DROP LENGTH, (TECHNA NDT OR EQUIVALENT) | 1 | |
| SPENFLX-7 | ET PROBE | 1 | |
| SPENFLX925-10 | PROBE, 90 DEGREE, FREQUENCY RANGE 50-500 KHZ, NFE, SHIELDED, ABSOLUTE, 0.072 IN. (1.83 MM) TIP DIAMETER, 10.00 IN. (254 MM) LENGTH, 0.250 IN. (6.35 MM) DROP LENGTH (TECHNA NDT OR EQUIVALENT). | 1 | |
| SPENFLX95-10/2M | PROBE, 90 DEGREE SURFACE PENCIL, FREQUENCY RANGE 1- 3 MHZ, NFE, SHIELDED, ABSOLUTE, 0.072 IN. (1.83 MM) TIP DIAMETER, 10.00 IN. (254 MM) LENGTH, 0.500 IN. (12.7 MM) DROP LENGTH, (TECHNA NDT OR EQUIVALENT) | 1 | |
| SPO-565 | DETACHABLE LF SURFACE PROBE, 300HZ - 10KHZ, .620" DIA, BRIDGE | 1 | |
| SPO3564 | ROTATING PROBE DIAMETER 3.96 MM (0.156 IN) - 4.75 MM (0.187 IN) | 1 | |
| SPR.34-20K | .340" Diameter, Spring Loaded Tip Surface Probe, 10-50KHz, Reflection, Triax Connector | 1 | |
| SPR.4-20K | .400" Diameter, Spring Loaded Tip Surface Probe, 10-50KHz, Reflection, Triax Connector | 1 | |
| SPT PPT2-6/2M | Pencil Probe, 90degree drop, .1"drop, 2-6MHz, Shaft diameter .125", triax shielded, 2" Length | 1 | |
| SPT XPPM305-40 | SPTech pencil probe, 50-500KHz, 30° drop, 0.5" drop length, 0.05" tip diameter, microdot connector | 1 | |
| SPT XTF305-40 | SPTech pencil probe, 50-500KHz, 30° drop, 0.5" drop length, 0.05" tip diameter, Triax connector | 1 | |
| SPT-2155 | Defectometer Probe | 1 | |
| SPT-4032 | Surface Probe, 10mm dia, Shielded, 500Hz-1KHz, Straight Housing, 7 Pin Fischer Socket. | 1 | |
| SPT/UX/22-25M | Probe, adjustable diameter 22-25mm, X-Type | 1 | |
| SPTech 4088-1 | LF Probe, .3"-.32" Diameter, .5" High, 1-40KHz | 1 | |
| SPTech UR.090SS/1" | Nortec Minimite Scanner probe, 1" WL, .090" diameter, 100KHz to 2MHz, Stainless steel, 4pin lemo connector | 1 | |
| SR2 | PROBE DIN 65181(FOR MEGOMETRE) | 1 | |
| SRM-02 / Z2033 | 100V SURFACE RESISTIVITY METER WITH PROBE | 1 | |
| ST895A-3 | PROBE - RESISTIVITY MEASUREMENT, SURFACE NOTE: OPTIONAL TOOL / LOW USE TOOL - ONLY USE FOR OPTIONAL ST895A-3 TEST METHOD WHICH IS NOT CURRENTLY USED IN 737NG AMM -51-21- 71 - SEE REFERENCED BAC5639 PSD 6-14, PAGES 11 - 13 | 6 | |
| ST90652 | PROBE, AIR INLET | 1 | |
| STD-1336 | THERMOMETER - DIGITAL, 0-150 /- 2 DEGREES F, WITH A PROBE, THERMOCOUPLEEQUIVALENT | 1 | |
| STD1336 | DIGITAL PROBE THERMOMETER | 1 | |
| SUB-12-14 | ET PROBE (NDT) | 1 | |
| SUB-14-16 | ET probe, rotating, differential, (NDT) | 1 | |
| SUB-28-32 | SELF-ADJUSTING UNIVERSAL WITH BELL BACKSHELL ROTARY HOLE PROBE 0.437 IN. (11.11 MM) DIAMETER | 1 | |
| Silverwing R-Scan 100 - Ultrasonic Scanner | Silverwing R-Scan 100 - Ultrasonic Scanner - Manual ultrasonic scanner, Dry coupled wheel probe, Inspect a variety of surfaces including pipes and elbows | 1 | |
| T-275GK13M | MULTIMETER W/CASE GK13M PROBE | 1 | |
| T456CFNF1S | THICKNESS PROBE FOR FERROUS AND NON-FERROUS METAL SUBSTRATES | 1 | |
| T477W | Bonding Meter - Probes sold separately | 12 | |
| T8909-66 | 501KB7, air inlet pressure probe | 1 | |
| TB2K-FCOMP-TK5 | TB2K-FCOMP-TK5;TB2000 FiberComplete kit 1310/1550 FTTH-SLM SAA FiberChek Probe tips | 1 | |
| TC 5/10SF | T/R PROBE (5MHZ) TYPE: TWIN CRYSTAL, CONNECTOR TYPE: LEMO 00, CRYSTAL DIAMETER: 10 MM TWIN, NOMINAL FOCUS: 8MM MFG: POENIX PN: TC 5/10SF | 1 | |
| TC1019-4-11 | 501KB7, air inlet pressure probe | 1 | |
| TE001U2158-4 | PROBE KIT USED WITH DWYER SERIES 475 MARK III MANO METER | 2 | |
| TE28/1 | 3 METER CABLE AND TEST PROBE | 3 | |
| TE9/1. | KELVIN PROBE (RCP2A BONDING METER) | 1 | |
| TE9/JE | 3 METER CABLE BIPOLAR TIPS TEST PROBE 3 PINS JAEGGER CONNECTOR TO THE RCP2A | 1 | |
| TEK-1516 | Diaphragm Inspection setup includes Base and Probe | 1 | |
| TEK-1548 | Probe, 4.2mm wide tip, Hand Held Probe Body, 100KHz-2MHz, Smaller Diameter Scan | 1 | |
| TEK-1549 | Probe, 4.2mm wide tip, Hand Held Probe Body, 100KHz-2MHz, Larger Diameter Scan | 1 | |
| TEK-2007 | LOW FREQUENCY DIFFERENTIAL PROBE , 1-40KHZ. MAXIMUM HEIGHT OF .50" INCHES AND DIAMETER OF .300" TO .320" INCHES. FLAT AT THE END. USED WITH ANDT3016-B REFERENCE STANDARD. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| TEK-2007-1 | LF Probe, .3"-.32" Diameter, .5" High, 1-40KHz, Differential | 1 | |
| TEK-2007-1/7L | LF Probe, .3"-.32" Diameter, .5" High, 1-40KHz, Differential, 7pin Lemo | 1 | |
| TEK-2029 | Defectometer Probe, Equiv to NEC-2155 | 1 | |
| TEK-2056 | Special probe Canadair jet 53-41-182 PG4 PT 6 | 1 | |
| TEK-2057 | Special Probe Canadair jet 53-41-182 pt6 pg3 | 1 | |
| TEK-2057-1 | Special Probe Canadair jet 53-41-182 pt6 pg3 | 1 | |
| TEK-3005EM-6.1M | Flexible Shaft Scanner Probe, 6.1mm Diameter, A320 PT6 53-31-50 PG623, Elotest Mini, 100KHz-2MHz | 1 | |
| TEK-3005EM-6.1M/SS | Flexible Shaft Scanner Probe, 6.1mm Diameter, A320 PT6 53-31-50 PG623, Elotest Mini Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005EM-7.8M | Flexible Shaft Scanner Probe, 7.8mm Diameter, A320 PT6 53-31-50 PG623, Elotest Mini, 100KHz-2MHz | 1 | |
| TEK-3005EM-7.8M/SS | Flexible Shaft Scanner Probe, 7.8mm Diameter, A320 PT6 53-31-50 PG623, Elotest Min Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005EM-9.3M/SS | Flexible Shaft Scanner Probe, 9.3mm Diameter, A320 PT6 53-31-50 PG623, Elotest Min Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005R-4.45M | Flexible Shaft Scanner Probe, 4.45mm Diameter Rechii connector (4-pin Lemo), 100KHz-2MHz | 1 | |
| TEK-3005R-4.7M | Flexible Shaft Scanner Probe, 4.7mm Diameter, Rechii Minimite (4-pin Lemo), A320 PT6 53-31-50 PG623, 100KHz-2MHz | 1 | |
| TEK-3005R-6.1M | Flexible Shaft Scanner Probe, 6.1mm Diameter, Rechii Minimite (4-pin Lemo), A320 PT6 53-31-50 PG623, 100KHz-2MHz | 1 | |
| TEK-3005R.156 | Eddy current, flexible shaft, bolt hole probe, .156 diameter, Rechii connector (4-pin Lemo), 100KHz-2MHz | 1 | |
| TEK-3005R.156/4WL | Eddy current, flexible shaft, bolt hole probe, .156 diameter, 4" working length Rechii connector (4-pin Lemo), 100KHz-2MHz | 1 | |
| TEK-3005R.187 | Eddy current, flexible shaft, bolt hole probe, .187 diameter, Rechii connector (4-pin Lemo), 100KHz-2MHz | 1 | |
| TEK-3005R.187/6WL | Eddy current, flexible shaft, bolt hole probe, .187 diameter, 6" working length Rechii connector (4-pin Lemo), 100KHz-2MHz | 1 | |
| TEK-3005R.240 | Flexible Shaft Scanner Probe, .240" Diameter, A320 PT6 53-31-50 PG623 Rechii connector (4-pin Lemo), 100KHz-2MHz | 1 | |
| TEK-3005R.250/6WL | Eddy current, flexible shaft, bolt hole probe, .250 diameter, 6" working length Rechii connector (4-pin Lemo), 100KHz-2MHz | 1 | |
| TEK-3005R.375/6WL | Eddy current, flexible shaft, bolt hole probe, .375 diameter, 6" working length Rechii connector (4-pin Lemo), 100KHz-2MHz | 1 | |
| TEK-3005U-4.0M/SS/90WL | Flexible Shaft Scanner Probe, 4.0mm Diameter, 90mm WL, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005U-4.45M | Flexible Shaft Scanner Probe, 4.45mm Diameter, 100KHz-2MHz | 1 | |
| TEK-3005U-4.7M | Flexible Shaft Scanner Probe, 4.7mm Diameter, A320 PT6 53-31-50 PG623, 100KHz-2MHz | 1 | |
| TEK-3005U-4.7M/SS/70WL | Flexible Shaft Scanner Probe, 4.7mm Diameter, 70mm WL, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005U-4.8M/SS/90WL | Flexible Shaft Scanner Probe, 4.8mm Diameter, 90mm WL, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005U-6.1M | Flexible Shaft Scanner Probe, 6.1mm Diameter, A320 PT6 53-31-50 PG623, 100KHz-2MHz | 1 | |
| TEK-3005U-6.1M/SS/90WL | Flexible Shaft Scanner Probe, 6.1mm Diameter, 90mm WL, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005U-6.25M | Flexible Shaft Scanner Probe, 6.25mm Diameter, A300-600 PT6 53-15-79 PG606 FG603, 100KHz-2MHz | 1 | |
| TEK-3005U-6.6M/SS | Flexible Shaft Scanner Probe, 6.6mm Diameter Universal connector, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005U-7.8M | FLEXIBLE SHAFT SCANNER PROBE, 7.8MM DIAMETER, 90MM WL, A320 PT6 53-31-50 PG623, 100KHZ-2MHZ | 1 | |
| TEK-3005U-7.8M/SS/90WL | Flexible Shaft Scanner Probe, 7.8mm Diameter, 90mm WL, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005U-7.9M/SS/90WL | Flexible Shaft Scanner Probe, 7.9mm Diameter, 90mm WL, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005U-8.2M | Flexible Shaft Scanner Probe, 8.2mm Diameter, A320 PT6 53-31-50 PG623, 100KHz-2MHz | 1 | |
| TEK-3005U-8.7M | Flexible Shaft Scanner Probe, 8.7mm Diameter, A320 PT6 53-31-50 PG623, 100KHz-2MHz | 1 | |
| TEK-3005U-9.4M | Flexible Shaft Scanner Probe, 9.4mm Diameter, A300-600 PT6 53-15-79 PG606 FG603, 100KHz-2MHz | 1 | |
| TEK-3005U.140/SS/4WL | Flexible Shaft Scanner Probe, .140 Diameter, 4" WL, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005U.156 | Eddy current, flexible shaft, bolt hole probe, .156 diameter, Universal connector, 100KHz-2MHz | 1 | |
| TEK-3005U.156/4WL | Eddy current, flexible shaft, bolt hole probe, .156 diameter, 4" working length Universal connector, 100KHz-2MHz | 1 | |
| TEK-3005U.156/SS/4WL | Flexible Shaft Scanner Probe, .156 Diameter, 4" WL, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005U.171/SS/4WL | Flexible Shaft Scanner Probe, .171 Diameter, 4" WL, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005U.187 | Eddy current, flexible shaft, bolt hole probe, .187 diameter, Universal connector, 100KHz-2MHz | 1 | |
| TEK-3005U.187/4WL | Eddy current, flexible shaft, bolt hole probe, .187 diameter, 4" working length Universal connector, 100KHz-2MHz | 1 | |
| TEK-3005U.203/SS/4WL | Flexible Shaft Scanner Probe, .203 Diameter, 4" WL, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005U.240 | Flexible Shaft Scanner Probe, .240" Diameter, A320 PT6 53-31-50 PG623 Universal connector, 100KHz-2MHz | 1 | |
| TEK-3005UFB-10.3M/SS/90WL | Flexible Shaft Scanner Probe,10.3mm Diameter, 90mm WL, Flat Bottom, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB-10.7M/SS/90WL | Flexible Shaft Scanner Probe,10.7mm Diameter, 90mm WL, Flat Bottom, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB-11.1M/SS/90WL | Flexible Shaft Scanner Probe,11.1mm Diameter, 90mm WL, Flat Bottom, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB-11.5M/SS/90WL | Flexible Shaft Scanner Probe,11.5mm Diameter, 90mm WL, Flat Bottom, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB-11.9M/SS/90WL | Flexible Shaft Scanner Probe,11.9mm Diameter, 90mm WL, Flat Bottom, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB-4.0M/SS/90WL | Flexible Shaft Scanner Probe, 4.0mm Diameter, 90mm WL, Flat Bottom, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB-4.1M/SS/90WL | Flexible Shaft Scanner Probe, 4.1mm Diameter, 90mm WL, Flat Bottom, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB-4.5M/SS/90WL | Flexible Shaft Scanner Probe, 4.5mm Diameter, 90mm WL, Flat Bottom, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB-4.8M/SS/90WL | Flexible Shaft Scanner Probe, 4.8mm Diameter, 90mm WL, Flat Bottom, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB-5.1M/SS/90WL | Flexible Shaft Scanner Probe, 5.1mm Diameter, 90mm WL, Flat Bottom, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB-5.5M/SS/90WL | Flexible Shaft Scanner Probe, 5.5mm Diameter, 90mm WL, Flat Bottom, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB-5.9M/SS/90WL | Flexible Shaft Scanner Probe, 5.9mm Diameter, 90mm WL, Flat Bottom, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB-6.3M/SS/90WL | Flexible Shaft Scanner Probe, 6.3mm Diameter, 90mm WL, Flat Bottom, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB-6.7M/SS/90WL | Flexible Shaft Scanner Probe, 6.7mm Diameter, 90mm WL, Flat Bottom, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB-6.8M/SS/90WL | Flexible Shaft Scanner Probe, 6.8mm Diameter, 90mm WL, Flat Bottom, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB-7.1M/SS/90WL | Flexible Shaft Scanner Probe, 7.1mm Diameter, 90mm WL, Flat Bottom, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB-7.5M/SS/90WL | Flexible Shaft Scanner Probe, 7.5mm Diameter, 90mm WL, Flat Bottom, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB-7.6M/SS/90WL | Flexible Shaft Scanner Probe, 7.6mm Diameter, 90mm WL, Flat Bottom, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB-7.9M/SS/90WL | Flexible Shaft Scanner Probe, 7.9mm Diameter, 90mm WL, Flat Bottom, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB-8.3M/SS/90WL | Flexible Shaft Scanner Probe,8.3mm Diameter, 90mm WL, Flat Bottom, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB-8.7M/SS/90WL | Flexible Shaft Scanner Probe,8.7mm Diameter, 90mm WL, Flat Bottom, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB-9.1M/SS/90WL | Flexible Shaft Scanner Probe,9.1mm Diameter, 90mm WL, Flat Bottom, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB-9.5M/SS/90WL | Flexible Shaft Scanner Probe,9.5mm Diameter, 90mm WL, Flat Bottom, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB-9.9M/SS/90WL | Flexible Shaft Scanner Probe,9.9mm Diameter, 90mm WL, Flat Bottom, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-10.3M/SS/104WL | Flexible Shaft Scanner Probe, 10.3mm Diameter, 104mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-10.3M/SS/90WL | Flexible Shaft Scanner Probe, 10.3mm Diameter, 90mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-10.7M/SS/90WL | Flexible Shaft Scanner Probe, 10.7mm Diameter, 90mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-11.1M/SS/90WL | Flexible Shaft Scanner Probe, 11.1mm Diameter, 90mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-11.5M/SS/90WL | Flexible Shaft Scanner Probe, 11.5mm Diameter, 90mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-11.9M/SS/90WL | Flexible Shaft Scanner Probe, 11.9mm Diameter, 90mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-5.1M/SS/90WL | Flexible Shaft Scanner Probe, 5.1mm Diameter, 90mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-5.5M/SS/90WL | Flexible Shaft Scanner Probe, 5.5mm Diameter, 90mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-5.9M/SS/90WL | Flexible Shaft Scanner Probe, 5.9mm Diameter, 90mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-6.2M/SS/104WL | Flexible Shaft Scanner Probe, 6.2mm Diameter, 104mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-6.3M/SS/90WL | Flexible Shaft Scanner Probe, 6.3mm Diameter, 90mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-6.7M/SS/90WL | Flexible Shaft Scanner Probe, 6.7mm Diameter, 90mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-7.0M/SS/104WL | Flexible Shaft Scanner Probe, 7.0mm Diameter, 104mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-7.1M/SS/104WL | Flexible Shaft Scanner Probe, 7.1mm Diameter, 104mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-7.1M/SS/90WL | Flexible Shaft Scanner Probe, 7.1mm Diameter, 90mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-7.5M/SS/104WL | Flexible Shaft Scanner Probe, 7.5mm Diameter, 104mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-7.5M/SS/90WL | Flexible Shaft Scanner Probe, 7.5mm Diameter, 90mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-7.8M/SS/104WL | Flexible Shaft Scanner Probe, 7.8mm Diameter, 104mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-7.9M/SS/104WL | Flexible Shaft Scanner Probe, 7.9mm Diameter, 104mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-7.9M/SS/90WL | Flexible Shaft Scanner Probe, 7.9mm Diameter, 90mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-8.3M/SS/104WL | Flexible Shaft Scanner Probe, 8.3mm Diameter, 104mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-8.3M/SS/90WL | Flexible Shaft Scanner Probe, 8.3mm Diameter, 90mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-8.6M/SS/104WL | Flexible Shaft Scanner Probe, 8.6mm Diameter, 104mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-8.7M/SS/104WL | Flexible Shaft Scanner Probe, 8.7mm Diameter, 104mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-8.7M/SS/90WL | Flexible Shaft Scanner Probe, 8.7mm Diameter, 90mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-9.1M/SS/104WL | Flexible Shaft Scanner Probe, 9.1mm Diameter, 104mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-9.1M/SS/90WL | Flexible Shaft Scanner Probe, 9.1mm Diameter, 90mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-9.4M/SS/104WL | Flexible Shaft Scanner Probe, 9.4mm Diameter, 104mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-9.5M/SS/104WL | Flexible Shaft Scanner Probe, 9.5mm Diameter, 104mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-9.5M/SS/90WL | Flexible Shaft Scanner Probe, 9.5mm Diameter, 90mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-9.9M/SS/104WL | Flexible Shaft Scanner Probe, 9.9mm Diameter, 104mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3005UFB3-9.9M/SS/90WL | Flexible Shaft Scanner Probe, 9.9mm Diameter, 90mm WL, Flat Bottom, Coil at 30°, Universal connector, A320 PT6 53-31-50 PG623, Stainless Steel, 100KHz-2MHz | 1 | |
| TEK-3016-.73 | Adjustable Diameter Hole Probe, .730"-.790", TF Connector, 25KHz | 1 | |
| TEK-3016-.86 | Adjustable Diameter Hole Probe, .860"-.910", TF Connector, 25KHz | 1 | |
| TEK-3021 | Adjustable Diameter Hole Probe, 1.0" - 1.125", 25KHz | 1 | |
| TEK-3021-RR | Adjustable Diameter Hole Probe, 1.0" - 1.125", Rechii Connector, 25KHz | 1 | |
| TEK-3023 | Adjustable Diameter Hole Probe, 1.375" - 1.5", 25KHz | 1 | |
| TEK-3040 | SS ROTARY PROBE, 17MM WORKING LENGTH, 6.2MM DIAMETER, 4PIN FISCHER, ROHMANN DESIGN | 1 | |
| TEK-4001-2 | Special LF Probe .25 Diameter, 2-200Khz | 1 | |
| TEK-4020/.25 | Detachable LF Surface Probe, 5KHz to 100KHz, .250" Dia, Bridge | 1 | |
| TEK-4020/.62 | DETACHABLE LF SURFACE PROBE, 300HZ - 10KHZ, .620" DIA, BRIDGE | 1 | |
| TEK-4027 | CYLINDRICAL PROBE-ABSOLUTE, FOCUSED DIAMETER PROBE = 9.5 MM (0.374 IN.) FREQUENCY RANGE 100 HZ-10 KHZ | 1 | |
| TEK-4054-07A | Reflection Spot Probe, 1-100KHz, .28 Diameter x 1.89H, 4-PIN Lemo, Steel Body | 1 | |
| TEK-4054-11A | Reflection Spot Probe, 300Hz-100KHz, .44 Diameter x 1.77H, 4-PIN Lemo, Delrin Body | 1 | |
| TEK-4054-13A | Reflection Spot Probe, 200Hz-200KHz, .500 Diameter x 1.77H, 4-pin lemo, Delrin Body | 1 | |
| TEK-4054-16A | Reflection Spot Probe, 300Hz-100KHz, .62 Diameter x 1.77H, 4-PIN Lemo, Delrin Body | 1 | |
| TEK-4054-24A | Reflection Spot Probe, 80Hz-60KHz, .944" Diameter .x 2.28"H, 4-PIN Lemo, Delrin Body | 1 | |
| TEK-4054-32A | Reflection Spot Probe, 80Hz-30KHz, 1.25" Diameter x 2.36"H, 4-PIN Lemo, Delrin Body | 1 | |
| TEK-4057 | Ring Probe, 0.90" (22.86 mm} outside diameter, 0.53" (13.46 mm) inside diameter. 0.90" (22.86 mm) height, reflection. frequency range 50Hz-5KHz, Triax Connector | 1 | |
| TEK-4062 | PROBETECHNA NDT | 1 | |
| TEK-4075 | LF Spot Probe, Reflection, 20Hz-10kHz, 39mm diameter, 30mm active areaAnodized Aluminum Housing, 4pin Fischer | 1 | |
| TEK3005UFB3-11.8M/SS/104WL | 100KHZ-2MHZ (FLEXIBLE SHAFT SCANNER PROBE, 11,8MM DIAMETER, 104MM WL, FLAT BOTTOM, COIL AT 30 DEGREES) | 1 | |
| TEK3005UFB3-11M/SS/104WL | 100KHZ-2MHZ (FLEXIBLE SHAFT SCANNER PROBE, 11MM DIAMETER, 104MM WL, FLAT BOTTOM, COIL AT 30 DEGREES) | 1 | |
| TMD-51 | AMPROBE THERMOCOUPLE THERMOMETER J TYPE OR EQUIVALENT | 1 | |
| TP38 | PROBE - MULTIMETER, INSULATED, SLIM REACH | 4 | |
| TPCL00-L00 | TWIN PROBE CABLE (LEMO 00-LEMO 00) 2 METERS LONG MFG: PHOENIX PN: TPCL00-L00 | 1 | |
| TPEN9120-6B | HIGH FREQUENCY SHIELDED PENCIL PROBE MICRO DOT PROBE CONNECTION AND 12LEMO PIN OR BNC MENTOR EM INSTRUMENT CONNECTION 90 AND 45 DEGREE 3.2 MM DIAMETER | 1 | |
| TPEN95-6B | SURFACE PENCIL PROBE, 90 DEGREES DROP ANGLE, 50-500 KHZ FREQUENCY, CRANKED, ABSOLUTE, SHIELDED, 0.125 IN. (3.18 MM) DIAMETER, 6.00 IN. (152.4 MM) LENGTH, 30 DEGREE BENT SHAFT ANGLE (AT THE HANDLE), 0.500 IN. (12.70 MM) TIP LENGTH, (OLYMPUS OR EQUIVALENT) | 1 | |
| TPENFLX-6/3M | PROBE, ANGULO RETO | 1 | |
| TPENFLX91-6 | METAL SHAFT PROBE | 1 | |
| TPN95-4/5K | SMALL DIAMETER LFEC PROBE(0.25") | 1 | |
| TPNR45-4.5/3K/.315 | PROBE - PENCIL, 3KHZ FREQUENCY, NFE/FE, REFLECTION, SHIELDED, 45 DEGREE, 0.315 IN. (8.0 MM) DIAMETER, 4.500 IN. (114.0 MM) LONG, 0.500 IN. (12.70 MM) TIP LENGTH (ETHER NDE OR EQUIVALENT) | 1 | |
| TPNR95-4/5K-4L | PROBE, LOW FREQUENCY, PENCIL TYPE, 90 DEGREE, 1- 10KHZ , REFLECTION, 0.1875 IN. (4.763 MM) DIAMETER, 0.94 IN. (23.9 MM) HEIGHT (TECHNA NDT OR EQUIVALENT). | 1 | |
| TPNR975-4/5K-4L | PROBE, LOW FREQUENCY, 90 DEGREE, PENCIL TYPE, 1- 10KHZ , REFLECTION, 0.187 IN. (4.75 MM) DIAMETER, 4.0 IN. (101.6 MM) LENGTH, 0.75 IN. (19.1 MM) DROP, 4 PINS LEMO CONNECTOR. (TECHNA NDT OR EQUIVALENT) | 1 | |
| TSPENFLX-7 | SMALL DIAMETER PROBE | 1 | |
| TSPENFLX91-6 | SMALL DIAMETER PROBE | 1 | |
| Tek-2056-1 | Special probe Canadair jet 53-41-182 PG4 PT 6 | 1 | |
| U8010008 | 9317793 : S-PR-3 RESONANCE PRO S-PR-3 RESONANCE PROBE 110 KHZ (+/- 10 KHZ) IN A 0.625 IN. DIAMETER C | 2 | |
| U8010011 | S-MP-3 MECHANICAL IMPEDANCE ANALYSIS PROBE, STANDARD, RIGHT ANGLE PROBE, .5 IN. TIP DIAMETER (CAN BE | 1 | |
| U8010015 | RIGHT ANGLE MIA PROBE, SMALL 6.35 MM (0.25") TIP DIAMETER, REQUIRES BMM-H (U8770417) FOR SPRING LOAD | 1 | |
| U8600488 | SELF-ADJUSTING UNIVERSAL WITH BELL BACKSHELL ROTARY HOLE PROBE 0.437 IN. (11.11 MM) DIAMETER | 1 | |
| U8614059 | ROTATING SCANNER PROBE, SPO-3564, PROBE DIAMETER 0.156 IN. -0.187 | 1 | |
| U8614092 | ROTATING SCANNER PROBE, SPO-3564, PROBE DIAMETER 0.218-0.250 | 1 | |
| U8614093 | ROTATING SCANNER PROBE. SPO-3564. PROBE DIAMETER 0.250-0.281 | 1 | |
| U8614094 | ROTATING SCANNER PROBE. SPO-3564. PROBE DIAMETER 0.281-0.312 | 1 | |
| U8616220 | RIGHT ANGLE FLEXIBLE METAL SHAFT SURFACE PROBE | 1 | |
| U8623113 | Flexible metal shaft pencil probe | 1 | |
| U8670043 | 9222342 DETACHABLE EC PROBE KIT | 1 | |
| U8680058 | EDDY CURRENT PROBE SET, F-16 SIDE STICK CONTROLLER DIAPHRAGM | 1 | |
| U8690029 | SPO-887L CONDUCTIVITY PROBE, 60 KHZ, STRAIGHT PROBE, .312 IN. DIAMETER WITH ALARM LED, 16-PIN LEMO C | 1 | |
| U8690030 | CONDUCTIVITY PROBE, 480 KHZ , STRAIGHT PROBE, .312 IN. DIAMETER WITH ALARM LED, 16-PIN LEMO CONNECTO | 1 | |
| U8770335 | RIGHT ANGLE MIA PROBE, INTERNAL ADJUSTABLE SPRING TENSION, STANDARD 12.7 MM (0.5") TIP DIAMETER | 1 | |
| U8800739 | 9230585 16P LEMO TO MD WITH CA. 16 PIN LEMO TO MICRODOT WITH BALANCECOIL 8.2UH CABLE, 6 FOOT LONG (1.8M) FOR SINGLE COIL MICRODOT PROBES OPERATING BETWEEN 1MHZ - 2MHZ | 1 | |
| ULTRASONIC TEST SET | ULTRASONIC TEST SET 5MHZ DELAY LINE, 1/2" PROBE | 1 | |
| UR.125SE | PROBE, DIAMETR 156-187", 1.75" WL, 100KHZ-2MHZ, SPREAD END | 1 | |
| UR.125SS/1.1WL | UNIVERSAL ROTARY HOLE PROBE STAINLESS STEEL HOUSING, 0.125 INCH (3.18MM) DIAMETER, 1.1 INCH (2.79CM) WORKING LENGTH. OPERATING FREQUENCY 200KHZ -3MHZ, FISCHER 4 PIN CONNECTOR, REFLECTION DIFFERENTIAL COIL CONFIGURATION. | 1 | |
| UR.156SE | PROBE, DIAMETR 156-187", 1.75" WL, 100KHZ-2MHZ, SPREAD END | 1 | |
| UR.187SE | PROBE, DIAMETR 187-218" WL,1.75" WL, 100KHZ-2MHZ, SPREAD END | 1 | |
| UR.187SS/1.1WL | UNIVERSAL ROTARY HOLE PROBE STAINLESS STEEL HOUSING, 0.187 INCH (4.75MM) DIAMETER, 1.1 INCH (2.79CM) WORKING LENGTH. OPERATING FREQUENCY 200KHZ -3MHZ, FISCHER 4 PIN CONNECTOR, REFLECTION DIFFERENTIAL COIL CONFIGURATION. | 1 | |
| UR.250SS/2WL | UNIVERSAL ROTARY HOLE PROBE STAINLESS STEEL HOUSING, 0.250 INCH (6.35MM) DIAMETER, 2.0 INCH (5.08CM) WORKING LENGTH. OPERATING FREQUENCY 200KHZ -3MHZ, FISCHER 4 PIN CONNECTOR, REFLECTION DIFFERENTIAL COIL CONFIGURATION. | 1 | |
| UR.312SS/1.5WL | UNIVERSAL ROTARY HOLE PROBE STAINLESS STEEL HOUSING, 0.312 INCH (7.92MM) DIAMETER, 1.5 INCH (3.81CM) WORKING LENGTH. OPERATING FREQUENCY 200KHZ -3MHZ, FISCHER 4 PIN CONNECTOR, REFLECTION DIFFERENTIAL COIL CONFIGURATION. | 1 | |
| UR.375SS/1.5WL | UNIVERSAL ROTARY HOLE PROBE STAINLESS STEEL HOUSING, 0.375 INCH (9.53MM) DIAMETER, 1.5 INCH (3.81CM) WORKING LENGTH. OPERATING FREQUENCY 200KHZ -3MHZ, FISCHER 4 PIN CONNECTOR, REFLECTION DIFFERENTIAL COIL CONFIGURATION. | 1 | |
| UR.500SE | UNIVERSAL ROTARY HOLE PROBE 0.500 INCH (12.6 MM) TO 0.562 INCH (14.2 MM) DIAMETER | 1 | |
| UR.500SS | UNIVERSAL ROTARY HOLE PROBE STAINLESS STEEL HOUSING, 0.500 INCH (12.7MM) DIAMETER, 2.0 INCH (5.08CM) WORKING LENGTH. OPERATING FREQUENCY 200KHZ -3MHZ, FISCHER 4 PIN CONNECTOR, REFLECTION DIFFERENTIAL COIL CONFIGURATION. | 1 | |
| UR.750/8OAL | Universal Scanner Hole Probe, .750" Diameter with 8" Length, 100KHz-2MHz | 1 | |
| UR10.3MFB/SS/15WL | Universal Rotary Flat Bottom Probe, 10.3mm diameter, 15mmWL, Stainless Steel, 10KHz-500KHz | 1 | |
| UR10.7MFB/SS/15WL | Universal Rotary Flat Bottom Probe, 10.7mm diameter, 15mmWL, Stainless Steel, 10KHz-500KHz | 1 | |
| UR11.1MFB/SS/15WL | Universal Rotary Flat Bottom Probe, 11.1mm diameter, 15mmWL, Stainless Steel, 10KHz-500KHz | 1 | |
| UR11.5MFB/SS/15WL | Universal Rotary Flat Bottom Probe, 11.5mm diameter, 15mmWL, Stainless Steel, 10KHz-500KHz | 1 | |
| UR11.9MFB/SS/15WL | Universal Rotary Flat Bottom Probe,11.9mm diameter, 15mmWL, Stainless Steel, 10KHz-500KHz | 1 | |
| UR12.3MFB/SS/15WL | Universal Rotary Flat Bottom Probe, 12.3mm diameter, 15mmWL, Stainless Steel, 10KHz-500KHz | 1 | |
| UR4M/SS/90WL | UNIVERSAL ROTARY PROBE 4mm Diameter 90mmWL Stainless Steel 100KHZ-2MHZ 4-pin Fischer connector | 1 | |
| UR6.3MFB/SS/15WL | Universal Rotary Flat Bottom Probe, 6.3mm diameter, 15mmWL, Stainless Steel, 10KHz-500KHz | 1 | |
| UR6.7MFB/SS/15WL | Universal Rotary Flat Bottom Probe, 6.7mm diameter, 15mmWL, Stainless Steel, 10KHz-500KHz | 1 | |
| UR7.1MFB/SS/15WL | Universal Rotary Flat Bottom Probe, 7.1mm diameter, 15mmWL, Stainless Steel, 10KHz-500KHz | 1 | |
| UR7.5MFB/SS/15WL | Universal Rotary Flat Bottom Probe, 7.5mm diameter, 15mmWL, Stainless Steel, 10KHz-500KHz | 1 | |
| UR7.9MFB/SS/15WL | Universal Rotary Flat Bottom Probe, 7.9mm diameter, 15mmWL, Stainless Steel, 10KHz-500KHz | 1 | |
| UR8.3MFB/SS/15WL | Universal Rotary Flat Bottom Probe, 7.9mm diameter, 15mmWL, Stainless Steel, 10KHz-500KHz | 1 | |
| UR8.7MFB/SS/15WL | Universal Rotary Flat Bottom Probe, 8.7mm diameter, 15mmWL, Stainless Steel, 10KHz-500KHz | 1 | |
| UR9.1MFB/SS/15WL | Universal Rotary Flat Bottom Probe, 9.1mm diameter, 15mmWL, Stainless Steel, 10KHz-500KHz | 1 | |
| UR9.5M/SS | Universal Rotary Flat Bottom Probe, 9.5mm diameter, *85mm Total Length*, Stainless Steel, 100KHz-2MHz | 1 | |
| UR9.5MFB/SS/15WL | Universal Rotary Flat Bottom Probe, 9.5mm diameter, 15mmWL, Stainless Steel, 10KHz-500KHz | 1 | |
| UR9.9MFB/SS/15WL | Universal Rotary Flat Bottom Probe, 9.9mm diameter, 15mmWL, Stainless Steel, 10KHz-500KHz | 1 | |
| URKIT-114SE | SCANNER PROBE KIT SPO-5965 (SET OF 14 PROBES WITH CASE) | 1 | |
| URX 12-55M | Unirotor (Universal) X Probe, 12-15mm Diameter, 100KHz-2MHz, 4.3" WL | 1 | |
| URX 13-16M | Unirotor (Universal) X Probe,13-16mm Diameter, 100KHz-2MHz, 4.3" WL, 4-Pin Fischer Connectors | 1 | |
| URX 15-20M | Unirotor (Universal) X Probe, 15-20mm Diameter, 100KHz-2MHz, 4.3" WL | 1 | |
| URX 20-25M | Unirotor (Universal) X Probe, 20-25mm Diameter, 100KHz-2MHz, 4.3" WL | 1 | |
| URX 22-25M | Unirotor (Universal) X Probe, 22-25mm Diameter, 100KHz-2MHz | 1 | |
| URX 22-26/2M | Unirotor (Universal) X Probe, 22-26mm Diameter, 1-3MHz, 4"WL | 1 | |
| URX 26-30/2M | Unirotor (Universal) X Probe, 26-30mm Diameter, 1-3MHz, 4"WL | 1 | |
| URX 6-8M | Unirotor (Universal) X Probe, 6-8mm Diameter, 100KHz-2MHz, 4.3" WL, 4-pin Fischer connectors | 1 | |
| URX 6.5-8M | Unirotor (Universal) X Probe, 6.5-8mm Diameter, 100KHz-2MHz, 4.3" WL, 4-pin Fischer connectors | 1 | |
| URX.187-.250 | Unirotor (Universal) X Probe, .187"-.250"Diameter, 100KHz-2MHz | 1 | |
| URX.187-.250/2M | Unirotor (Universal) X Probe, .187"-.250"Diameter, 1-3MHz | 1 | |
| URX.250-.312 | Unirotor (Universal) X Probe, .250"-.312"Diameter, 100KHz-2MHz | 1 | |
| URX.250-.312/2M | Unirotor (Universal) X Probe, .250"-.312"Diameter, 1-3MHz | 1 | |
| URX.312-.375 | Unirotor (Universal) X Probe, .312" to .375" Diameter, 100KHz-2MHz | 1 | |
| URX.375-.437 | Unirotor (Universal) X Probe, .375-.437 Diameter, 100KHz-2MHz | 1 | |
| URX.375-.437/4WL | Unirotor (Universal) X Probe, .375-.437 Diameter, 100KHz-2MHz, 4"WL | 1 | |
| URX.437-.500 | Unirotor (Universal) X Probe, .437-.500 Diameter, 100KHz-2MHz | 1 | |
| URX.437-.500/2M/3.5 WL | Unirotor (Universal) X Probe, .437"-.500" Diameter, 1-3MHz, 3.5 WL | 1 | |
| URX.437-.500/4WL | Unirotor (Universal) X Probe, .437-.500 Diameter, 100KHz-2MHz, 4"WL | 1 | |
| URX.500-.625 | Unirotor (Universal) X Probe, .500"-.625" Diameter, 100KHz-2MHz | 1 | |
| URX.500-.625/4WL | Unirotor (Universal) X Probe, .500"-.625" Diameter, 100KHz-2MHz, 4"WL | 1 | |
| URX.625-.750 | Unirotor (Universal) X Probe, .625"-.750" Diameter, 100KHz-2MHz | 1 | |
| URX.750-.875 | Unirotor (Universal) X Probe, .750"-.875" Diameter, 100KHz-2MHz | 1 | |
| URX.750-.875/5.3WL | Unirotor (Universal) X Probe, .750"-.875" Diameter, 100KHz-2MHz 5.3" WL | 1 | |
| URX.875-1.0 | Unirotor (Universal) X Probe, .875"-1.0" Diameter, 100KHz-2MHz | 1 | |
| URX.875-1.0-1 | Unirotor (Universal) X Probe, .875"-1.0" Diameter, 300KHz-1MHz | 1 | |
| URX.875-1.0/4.5WL | Unirotor (Universal) X Probe, .875"-1.0" Diameter, 100KHz-2MHz 4.5"WL | 1 | |
| URX.875-1.0/4WL | Unirotor (Universal) X Probe, .875"-1.0" Diameter, 100KHz-2MHz, 4"WL | 1 | |
| URX.993-1.064/4.1WL | Unirotor(universal) X Probe, .993-1.064" Diameter, 4.1WL, 100Khz-2Mhz | 1 | |
| URX1.0-1.125 | Unirotor (Universal) X Probe, 1.0" - 1.125" Diameter, 100KHz-2MHz | 1 | |
| URX1.0-1.125/4.3WL | Unirotor (Universal) X Probe, 1.0" - 1.125" Diameter, 100KHz-2MHz 4.3"WL | 1 | |
| URX1.064-1.135/4.1WL | Unirotor(Universal) X Probe, 1.064-1.135"Diameter, 4.1 WL, 100KHz-2MHz | 1 | |
| URX1.125-1.250 | Unirotor (Universal) X Probe, 1.125" - 1.25" Diameter, 100KHz-2MHz | 1 | |
| URX1.125-1.250/4.3WL | Unirotor (Universal) X Probe, 1.125" - 1.25" Diameter, 100KHz-2MHz 4.3"WL | 1 | |
| URX1.250-1.375 | Unirotor (Universal) X Probe, 1.250" - 1.375" Diameter, 100KHz-2MHz | 1 | |
| URX1.375-1.437 | Unirotor (Universal) X Probe, 1.375"-1.437" Diameter, 100KHz-2MHz | 1 | |
| URX1.375-1.5 | Unirotor (Universal) X Probe, 1.375" - 1.50" Diameter, 100KHz-2MHz | 1 | |
| URX1.437-1.5 | Unirotor (Universal) X Probe, 1.437"-1.5" Diameter, 100KHz-2MHz | 1 | |
| URX1.5-1.625 | Unirotor (Universal) X Probe, 1.5"-1.625" Diameter, 100KHz-2MHz | 1 | |
| URX2.0-2.125 | Unirotor (Universal) X Probe, 2.0"-2.125"Diameter, 100KHz-2MHz | 1 | |
| URX2.125-2.25 | Unirotor (Universal) X Probe, 2.125"-2.25"Diameter, 100KHz-2MHz | 1 | |
| URX2.25-2.375 | Unirotor (Universal) X Probe, 2.25"-2.375"Diameter, 100KHz-2MHz | 1 | |
| URXF.187-.250 | Unirotor (Universal) X Probe, .187"-.250"Diameter, 100KHz-2MHz, Shielded | 1 | |
| URXF.250-.312 | Unirotor (Universal) X Probe, .250"-.312"Diameter, 100KHz-2MHz, Shielded | 1 | |
| URXF.312-.375 | Unirotor (Universal) X Probe, .312" to .375" Diameter, 100KHz-2MHz | 1 | |
| URXF.375-.437 | Unirotor (Universal) X Probe, .375-.437 Diameter, 100KHz-2MHz, Shielded | 1 | |
| URY 10-11.5M | Universal Hole Probe, Adjustable Diameter, Ø10-11.5mm x 50mm WL, 100KHz-2MHz | 1 | |
| URY 10-12M | Universal Hole Probe, Adjustable Diameter, Ø10-12mm x 50mm WL, 100KHz-2MHz | 1 | |
| URY 11-13M | Universal Hole Probe, Adjustable Diameter, Ø11-13mm x 50mm WL, 100KHz-2MHz | 1 | |
| URY 11-13M/SS | Universal Hole Probe, Adjustable Diameter, Ø11-13mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| URY 11-13M/SS/U | Universal Hole Probe, Adjustable Diameter, Ø11-13mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL, Unshielded | 1 | |
| URY 11-13M/U | Universal Hole Probe, Adjustable Diameter, Ø11-13mm x 50mm WL, 100KHz-2MHz Unshielded | 1 | |
| URY 11.5-13M | Universal Hole Probe, Adjustable Diameter, Ø11.5-13mm x 50mm WL, 100KHz-2MHz | 1 | |
| URY 12-15M | Universal Hole Probe, Adjustable Diameter, Ø12-15mm x 50mm WL, 100KHz-2MHz | 1 | |
| URY 13-14.5M | Universal Hole Probe, Adjustable Diameter, Ø13-14.5mm x 50mm WL, 100KHz-2MHz | 1 | |
| URY 13-14.5M/SS | Universal Hole Probe, Adjustable Diameter, Ø13-14.5mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| URY 13-14.5M/SS/U | Universal Hole Probe, Adjustable Diameter, Ø13-14.5mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL Unshielded | 1 | |
| URY 13-16M | Universal Hole Probe, Adjustable Diameter, Ø13-16mm x 50mm WL, 100KHz-2MHz | 1 | |
| URY 13-16M/SS | Universal Hole Probe, Adjustable Diameter, Ø13-16mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL *Won't spread this far, use two probes 13mm-14.5mm & 14.5mm-16mm | 1 | |
| URY 13-16M/U | Universal Hole Probe, Adjustable Diameter, Ø13-16mm x 50mm WL, 100KHz-2MHz Unshielded | 1 | |
| URY 14.5-16M | Universal Hole Probe, Adjustable Diameter, Ø14.5-16mm x 50mm WL, 100KHz-2MHz | 1 | |
| URY 14.5-16M/SS | Universal Hole Probe, Adjustable Diameter, Ø14.5-16mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| URY 14.5-16M/SS/U | Universal Hole Probe, Adjustable Diameter, Ø14.5-16mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL Unshielded | 1 | |
| URY 15-18M | Universal Hole Probe, Adjustable Diameter, Ø15-18mm x 50mm WL, 100KHz-2MHz | 1 | |
| URY 16-17.5M/SS | Universal Hole Probe, Adjustable Diameter, Ø16-17.5mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| URY 16-18M | Universal Hole Probe, Adjustable Diameter, Ø16-18mm x 50mm WL, 100KHz-2MHz | 1 | |
| URY 16-19M | Universal Hole Probe, Adjustable Diameter, Ø16-19mm x 50mm WL, 100KHz-2MHz | 1 | |
| URY 16-19M/U | Universal Hole Probe, Adjustable Diameter, Ø16-19mm x 50mm WL, 100KHz-2MHz Unshielded | 1 | |
| URY 17.5-19M/SS | Universal Hole Probe, Adjustable Diameter, Ø17.5-19mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| URY 18-20M | Universal Hole Probe, Adjustable Diameter, Ø18-20mm x 50mm WL, 100KHz-2MHz | 1 | |
| URY 18-21M | Universal Hole Probe, Adjustable Diameter, Ø18-21mm x 50mm WL, 100KHz-2MHz | 1 | |
| URY 19-20.5M/SS | Universal Hole Probe, Adjustable Diameter, Ø19-20.5mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| URY 19-22M | Universal Hole Probe, Adjustable Diameter, Ø19-22mm x 50mm WL, 100KHz-2MHz | 1 | |
| URY 19-22M/SS | Universal Hole Probe, Adjustable Diameter, Ø19-22mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL *Won't spread this far, use two probes 19mm-20.5mm & 20.5mm-22mm | 1 | |
| URY 19-22M/U | Universal Hole Probe, Adjustable Diameter, Ø19-22mm x 50mm WL, 100KHz-2MHz Unshielded | 1 | |
| URY 19-27M | Universal Hole Probe, Adjustable Diameter, Ø19-27mm x 50mm WL, 100KHz-2MHz *Do Not Use* Use URY 19-22M, URY 22-25, URY 25-28M | 1 | |
| URY 20-23M | Universal Hole Probe, Adjustable Diameter, Ø20-23mm x 50mm WL, 100KHz-2MHz | 1 | |
| URY 20.5-22M/SS | Universal Hole Probe, Adjustable Diameter, Ø20.5-22mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| URY 21-24M | Universal Hole Probe, Adjustable Diameter, Ø21-24mm x 50mm WL, 100KHz-2MHz | 1 | |
| URY 22-23.5M/SS | Universal Hole Probe, Adjustable Diameter, Ø22-23.5mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| URY 22-25M | Universal Hole Probe, Adjustable Diameter, Ø22-25mm x 50mm WL, 100KHz-2MHz | 1 | |
| URY 22-25M/SS | Universal Hole Probe, Adjustable Diameter, Ø22-25mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL *Won't spread this far, use two probes 22mm-23.5mm & 23.5mm-25mm | 1 | |
| URY 22-25M/U | Universal Hole Probe, Adjustable Diameter, Ø22-25mm x 50mm WL, 100KHz-2MHz Unshielded | 1 | |
| URY 23-26M | Universal Hole Probe, Adjustable Diameter, Ø23-26mm x 50mm WL, 100KHz-2MHz | 1 | |
| URY 23.5-25M/SS | Universal Hole Probe, Adjustable Diameter, Ø23.5-25mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| URY 25-26.5M/SS | Universal Hole Probe, Adjustable Diameter, Ø25-26.5mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| URY 25-28M | Universal Hole Probe, Adjustable Diameter, Ø25-28mm x 50mm WL, 100KHz-2MHz | 1 | |
| URY 25-28M/U | Universal Hole Probe, Adjustable Diameter, Ø25-28mm x 50mm WL, 100KHz-2MHz Unshielded | 1 | |
| URY 26-29M | Universal Hole Probe, Adjustable Diameter, Ø26-29mm x 50mm WL, 100KHz-2MHz | 1 | |
| URY 26.5-28M/SS | Universal Hole Probe, Adjustable Diameter, Ø26.5-28mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| URY 28-30M/SS | Universal Hole Probe, Adjustable Diameter, Ø28-30mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| URY 29-31M | Universal Hole Probe, Adjustable Diameter, Ø29-31mm x 50mm WL, 100KHz-2MHz | 1 | |
| URY 3-4M | Universal Hole Probe, Adjustable Diameter, Ø3.0-4.0mm x 38mm WL, 100KHz-2MHz | 1 | |
| URY 3-4M/90WL | Universal Hole Probe, Adjustable Diameter, Ø3.0-4.0mm x 90mm WL, 100KHz-2MHz | 1 | |
| URY 3-4M/SS | Universal Hole Probe, Adjustable Diameter, Ø3.0-4.0mm x 38mm WL, 100KHz-2MHz Stainless Steel | 1 | |
| URY 3-4M/SS/U | Universal Hole Probe, Adjustable Diameter, Ø3.0-4.0mm x 38mm WL, 100KHz-2MHz Stainless Steel Unshielded | 1 | |
| URY 3-4M/U | Universal Hole Probe, Adjustable Diameter, Ø3.0-4.0mm x 38mm WL, 100KHz-2MHz Unshielded | 1 | |
| URY 30-32M/SS | Universal Hole Probe, Adjustable Diameter, Ø30-32mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| URY 32-33M/SS | Universal Hole Probe, Adjustable Diameter, Ø32-33mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| URY 33.5-35M/SS | Universal Hole Probe, Adjustable Diameter, Ø33.5-35mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| URY 4-5M | Universal Hole Probe, Adjustable Diameter, Ø4.0-5.0mm x 38mm WL, 100KHz-2MHz | 1 | |
| URY 4-5M/90WL | Universal Hole Probe, Adjustable Diameter, Ø4.0-5.0mm x 90mm WL, 100KHz-2MHz | 1 | |
| URY 4-5M/SS | Universal Hole Probe, Adjustable Diameter, Ø4.0-5.0mm x 38mm WL, 100KHz-2MHz stainless steel | 1 | |
| URY 4-5M/SS/U | Universal Hole Probe, Adjustable Diameter, Ø4.0-5.0mm x 38mm WL, 100KHz-2MHz stainless steel, Unshielded | 1 | |
| URY 4-5M/U | Universal Hole Probe, Adjustable Diameter, Ø4.0-5.0mm x 38mm WL, 100KHz-2MHz Unshielded | 1 | |
| URY 5-6.5M | Universal Hole Probe, Adjustable Diameter, Ø5.0-6.5mm x 38mm WL, 100KHz-2MHz | 1 | |
| URY 5-6.5M/SS | Universal Hole Probe, Adjustable Diameter, Ø5.0-6.5mm x 38mm WL, 100KHz-2MHz Stainless Steel | 1 | |
| URY 5-6.5M/SS/U | Universal Hole Probe, Adjustable Diameter, Ø5.0-6.5mm x 38mm WL, 100KHz-2MHz Stainless Steel, Unshielded | 1 | |
| URY 5-6.5M/U | Universal Hole Probe, Adjustable Diameter, Ø5.0-6.5mm x 38mm WL, 100KHz-2MHz Unshielded | 1 | |
| URY 5-6M | Universal Hole Probe, Adjustable Diameter, 5.0-6mm x 38mm WL, 100khz-2mhz | 1 | |
| URY 6-7M | Universal Hole Probe, Adjustable Diameter, Ø6-7mm x 50mm WL, 100KHz-2MHz | 1 | |
| URY 6-8M | Universal Hole Probe, Adjustable Diameter, Ø6-8mm x 50mm WL, 100KHz-2MHz | 1 | |
| URY 6.5-8M | Universal Hole Probe, Adjustable Diameter, Ø6.5-8mm x 38mm WL, 100KHz-2MHz | 1 | |
| URY 6.5-8M/SS | Universal Hole Probe, Adjustable Diameter, Ø6.5-8mm x 38mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| URY 6.5-8M/SS/U | Universal Hole Probe, Adjustable Diameter, Ø6.5-8mm x 38mm WL, 100KHz-2MHz STAINLESS STEEL, Unshielded | 1 | |
| URY 6.5-8M/U | Universal Hole Probe, Adjustable Diameter, Ø6.5-8mm x 38mm WL, 100KHz-2MHz Unshielded | 1 | |
| URY 7-8M | Universal Hole Probe, Adjustable Diameter, Ø7-8mm x 50mm WL, 100KHz-2MHz | 1 | |
| URY 8-9.5M | Universal Hole Probe, Adjustable Diameter, Ø8-9.5mm x 50mm WL, 100KHz-2MHz | 1 | |
| URY 8-9.5M/SS | Universal Hole Probe, Adjustable Diameter, Ø8-9.5mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| URY 8-9.5M/SS/U | Universal Hole Probe, Adjustable Diameter, Ø8-9.5mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL, Unshielded | 1 | |
| URY 8-9.5M/U | Universal Hole Probe, Adjustable Diameter, Ø8-9.5mm x 50mm WL, 100KHz-2MHz Unshielded | 1 | |
| URY 8-9M | Universal Hole Probe, Adjustable Diameter, Ø8-9mm x 50mm WL, 100KHz-2MHz | 1 | |
| URY 9-10M | Universal Hole Probe, Adjustable Diameter, Ø9-10mm x 50mm WL, 100KHz-2MHz | 1 | |
| URY 9.5-11M | Universal Hole Probe, Adjustable Diameter, Ø9.5-11mm x 50mm WL, 100KHz-2MHz | 1 | |
| URY 9.5-11M/SS | Universal Hole Probe, Adjustable Diameter, Ø9.5-11mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| URY 9.5-11M/SS/U | Universal Hole Probe, Adjustable Diameter, Ø9.5-11mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL Unshielded | 1 | |
| URY 9.5-11M/U | Universal Hole Probe, Adjustable Diameter, Ø9.5-11mm x 50mm WL, 100KHz-2MHz Unshielded | 1 | |
| URY.125-.156 | Unirotor (Universal) Y Probe, .125"-.156" Diameter, 100KHz-2MHz 1.5"WL | 1 | |
| URY.125-.156/1WL | Unirotor (Universal) Y Probe, .125"-.156" Diameter, 100KHz-2MHz, 1"WL | 1 | |
| URY.125-.156/2.5WL | Unirotor (Universal) Y Probe, .125"-.156" Diameter, 100KHz-2MHz, 2.5"WL | 1 | |
| URY.125-.156/2WL | Unirotor (Universal) Y Probe, .125"-.156" Diameter, 100KHz-2MHz, 2"WL | 1 | |
| URY.125-.156SS | Unirotor (Universal) Y Probe, .125"-.156" Diameter, 100KHZ-2MHZ, Stainless Steel 1.5"WL | 1 | |
| URY.125-.156SS/2WL | Unirotor (Universal) Y Probe, .125"-.156" Diameter, 100KHZ-2MHZ, Stainless Steel 2WL | 1 | |
| URY.125-.156SS/3WL | Unirotor (Universal) Y Probe, .125"-.156" Diameter, 100KHZ-2MHZ, Stainless Steel 3WL | 1 | |
| URY.156-.187 | Unirotor (Universal) Y Probe, .156"-.187" Diameter, 100KHz-2MHz 1.5"WL | 1 | |
| URY.156-.187/1.75WL | Unirotor (Universal) Y Probe, .156"-.187" Diameter, 100KHz-2MHz 1.75 WL | 1 | |
| URY.156-.187/1WL | Unirotor (Universal) Y Probe, .156"-.187" Diameter, 100KHz-2MHz 1" WL | 1 | |
| URY.156-.187/2M | Unirotor (Universal) Y Probe, .156"-.187" Diameter, 1-3MHz 1.5"WL | 1 | |
| URY.156-.187SS | Unirotor (Universal) Y Probe, .156"-.187" Diameter, 100K-2MHz, Stainless Steel 1.5"WL | 1 | |
| URY.156-.187SS/2M | Unirotor (Universal) Y Probe, .156"-.187" Diameter,1-3MHz Stainless Steel | 1 | |
| URY.156-.187SS/2WL | Unirotor (Universal) Y Probe, .156"-.187" Diameter, 100K-2MHz, Stainless Steel | 1 | |
| URY.156-.187SS/3.35 OAL | UNIROTOR (UNIVERSAL) Y PROBE, .156"-.187" DIAMETER, 100K-2MHZ, STAINLESS STEEL, 1.96" WL AND 3.35 OVERALL LENGTH | 1 | |
| URY.156-.187T | Unirotor (Universal) Y Probe, .156"-.187" Diameter, 100KHz-2MHz, Titanium Tip | 1 | |
| URY.171-.203/2M | Unirotor (Universal) Y Probe, .171"-.203" Diameter, 1-3MHz 1.5"WL | 1 | |
| URY.187-.250 | Unirotor (Universal) Y Probe, .187"-.250" Diameter, 100KHZ-2MHZ 1.5"WL | 1 | |
| URY.187-.250/1.75WL | Unirotor (Universal) Y Probe, .187"-.250" Diameter, 100KHZ-2MHZ 1.75WL | 1 | |
| URY.187-.250/1WL | Unirotor (Universal) Y Probe, .187"-.250" Diameter, 100KHZ-2MHZ 1"WL | 1 | |
| URY.187-.250/2M | Unirotor (Universal) Y Probe, .187"-.250" Diameter, 1-3MHZ 1.5"WL | 1 | |
| URY.187-.250/2WL | Unirotor (Universal) Y Probe, .187"-.250" Diameter, 100KHZ-2MHZ 2WL | 1 | |
| URY.187-.250SS | Unirotor (Universal) Y Probe, .187"-.250" Diameter, 100K-2MHz, Stainless Steel 1.5"WL | 1 | |
| URY.187-.250SS/2WL | Unirotor (Universal) Y Probe, .187-.250" Diameter, 100K-1MHz, Stainless Steel 2 Working Lenght | 1 | |
| URY.218-.250 | Unirotor (Universal) Y Probe, .218-.250 Diameter, 100KHZ-2MHZ | 1 | |
| URY.218-.250SS | Unirotor (Universal) Y Probe, .218-.250 Diameter, 100KZH-2MHZ | 1 | |
| URY.250-.282/1.75WL | Unirotor (Universal) Y Probe, .250" - .282" Diameter, 100KHz-2MHz 1.75WL | 1 | |
| URY.250-.312 | Unirotor (Universal) Y Probe, .250" - .312" Diameter, 100KHz-2MHz 1.5"WL | 1 | |
| URY.250-.312/1WL | Unirotor (Universal) Y Probe, .250" - .312" Diameter, 100KHz-2MHz 1" WL | 1 | |
| URY.250-.312/2M | Unirotor (Universal) Y Probe, .250" - .312" Diameter, 1-3MHz 1.5"WL | 1 | |
| URY.250-.312/3WL | Unirotor (Universal) Y Probe, .250" - .312" Diameter, 100KHz-2MHz, 3"WL | 1 | |
| URY.250-.312/4WL | Unirotor (Universal) Y Probe, .250" - .312" Diameter, 100KHz-2MHz 4" WL | 1 | |
| URY.250-.312/5WL | Unirotor (Universal) Y Probe, .250" - .312" Diameter, 100KHz-2MHz 5" WL | 1 | |
| URY.250-.312SS | Unirotor (Universal) Y Probe, .250"-.312" Diameter, 100K-2MHz, Stainless Steel 1.5"WL | 1 | |
| URY.250-.312SS/2M | Unirotor (Universal) Y Probe, .250"-.312" Diameter,1-3MHZ, Stainless Steel | 1 | |
| URY.250-.312SS/3WL | Unirotor (Universal) Y Probe, .250-.312" Diameter, 100K-2MHz, Stainless Steel 3 Working Length | 1 | |
| URY.281-.312/1.5WL | Unirotor (Universal) Y Probe, .281" - .312" Diameter, 100KHZ-2MHZ | 1 | |
| URY.312-.331/1.75WL | Unirotor (Universal) Y Probe, .312-.331" Diameter, 100KHz-2MHz 1.75WL | 1 | |
| URY.312-.375 | Unirotor (Universal) Y Probe, .312"-.375" Diameter, 100KHZ-2MHZ 2.0"WL | 1 | |
| URY.312-.375/1.0WL | Unirotor (Universal) Y Probe, .312"-.375" Diameter, 100KHZ-2MHZ 1.0"WL | 1 | |
| URY.312-.375/1.5WL | Unirotor (Universal) Y Probe, .312"-.375" Diameter, 100KHZ-2MHZ | 1 | |
| URY.312-.375/2M | Unirotor (Universal) Y Probe, .312-.375 Diameter, 1-3MHz 2.0"WL | 1 | |
| URY.312-.375/3.5WL | Unirotor (Universal) Y Probe, .312" - .375" Diameter, 100KHZ-2MHZ, 3.5" WL | 1 | |
| URY.312-.375SS | Unirotor (Universal) Y Probe, .312"-.375" Diameter, 100K-2MHz Stainless Steel 2.0"WL | 1 | |
| URY.312-.375SS/2M | Unirotor (Universal) Y Probe, .312"-.375" Diameter, 1-3MHZ, Stainless Steel | 1 | |
| URY.312-.375SS/4WL | Unirotor (Universal) Y Probe, .312"-.375" Diameter, 100K-2MHz Stainless Steel 4" WL | 1 | |
| URY.331-.393/1.75WL | Unirotor (Universal) Y Probe, .331" - .393" Diameter, 100KHz-2MHz 1.75WL | 1 | |
| URY.375-.437 | Unirotor (Universal) Y Probe, 3/8"-7/16" Diameter, 100KHz-2MHz 2.0"WL | 1 | |
| URY.375-.437/2M | Unirotor (Universal) Y Probe, 3/8"-7/16" Diameter, 1-3MHz 2.0"WL | 1 | |
| URY.375-.437/4WL | Unirotor (Universal) Y Probe, 3/8"-7/16" Diameter, 100KHz-2MHz 4.0"WL | 1 | |
| URY.375-.437SS | Unirotor (Universal) Y Probe, .375"-.437" Diameter, 100K-2MHz, Stainless Steel 2.0"WL | 1 | |
| URY.375-.437SS/2M | Unirotor (Universal) Y Probe, .375"-.437" Diameter, 1-3MHZ, Stainless Steel | 1 | |
| URY.375-.437SS/4WL | Unirotor (Universal) Y Probe, .375"-.437" Diameter, 100K-2MHz, Stainless Steel 4" WL | 1 | |
| URY.437-.500 | Unirotor (Universal) Y Probe, 7/16"-1/2" Diameter, 100KHz-2MHz 2.0"WL | 1 | |
| URY.437-.500/2M | Unirotor (Universal) Y Probe, 7/16"-1/2" Diameter, 1-3MHz 2.0"WL | 1 | |
| URY.437-.500SS | Unirotor (Universal) Y Probe, .437"-.500" Diameter, 100K-2MHz, Stainless Steel 2.0"WL | 1 | |
| URY.500-.562 | Unirotor (Universal) Y Probe, .500"-.562" Diameter, 100KHz-2MHz 2.0"WL | 1 | |
| URY.500-.562/4WL | Unirotor (Universal) Y Probe, .500"-.562" Diameter, 100KHz-2MHz 4.0"WL | 1 | |
| URY.500-.562SS | Unirotor (Universal) Y Probe, .500"-.562"" Diameter, 100K-2MHz, Stainless Steel 2.0"WL | 1 | |
| URY.500-.625 | Unirotor (Universal) Y Probe, .500"-.625" Diameter, 100KHz-2MHz 2.0"WL | 1 | |
| URY.500-.625/2M | Unirotor (Universal) Y Probe, .500"-.625" Diameter, 1-3 MHz 2.0"WL | 1 | |
| URY.500-.625/2M-3WL | Unirotor (Universal) Y Probe, 1/2"-5/8" Diameter, 1-3MHz 3 WL | 1 | |
| URY.500-.625/6WL | Unirotor (Universal) Y Probe, .500"-.625" Diameter, 100KHz-2MHz, 6" WL | 1 | |
| URY.500-.625SS | Unirotor (Universal) Y Probe, 1/2"-9/16" Diameter, 100KHz-2MHz, Stainless Steel *won't spread this far, use two probes .500-.562 & .562-.625 | 1 | |
| URY.562-.625 | Unirotor (Universal) Y Probe, .562"-.625" Diameter, 100KHz-2MHz 2.0"WL | 1 | |
| URY.562-.625SS | Unirotor (Universal) Y Probe, .562"-.625" Diameter, 100K-2MHz, Stainless Steel 2.0"WL | 1 | |
| URY.625-.750 | Unirotor (Universal) Y Probe, 5/8"-3/4" Diameter, 100KHz-2MHz 2.0"WL | 1 | |
| URY.625-.750/2M | Unirotor (Universal) Y Probe, 5/8"-3/4" Diameter, 1-3MHz 2.0"WL | 1 | |
| URY.625-.750SS | Unirotor (Universal) Y Probe, .625"-.750" Diameter, 1-2MHZ, Stainless Steel *won't spread this far, use two probes .625-.687 & .687-.750 | 1 | |
| URY.650-.750 | Unirotor (Universal) Y Probe, .650"-.750" Diameter, 100KHZ-2MHZ | 1 | |
| URY.687-750SS | Unirotor (Universal) Y Probe, .687"-750" Diameter, 100K-2MHz, Stainless Steel 2.0"WL | 1 | |
| URY.750-.812SS | Unirotor (Universal) Y Probe, .750"-.812" Diameter,50KHZ-2MHZ, Stainless Steel 2"WL | 1 | |
| URY.750-.875 | Unirotor (Universal) Y Probe, .750"-.875" Diameter,100KHZ-2MHz 2"WL | 1 | |
| URY.750-.875/2M | Unirotor (Universal) Y Probe, .750"-.875" Diameter, 1-3MhZ 2"WL | 1 | |
| URY.750-.875/3WL | Unirotor (universal) Y probe .750"-.875" Diameter 100KHz-2MHz 3WL | 1 | |
| URY.750-.875/6WL | Unirotor (Universal) Y Probe, .750"-.875" Diameter,100KHZ-2MHz, 6" WL | 1 | |
| URY.812-.875SS | Unirotor (Universal) Y Probe, .812"-.875" Diameter,100K-2MHz, Stainless Steel 2"WL | 1 | |
| URY.875-.937SS | Unirotor (Universal) Y Probe, .875"-.937" Diameter,100KHZ-2MHZ, Stainless Steel..2"WL | 1 | |
| URY.875-1.0 | Unirotor (Universal) Y Probe, .875"-1.0" Diameter, 100KHz-2MHz 2"WL | 1 | |
| URY.875-1.0/3WL | Unirotor (universal) Y probe .875"-1.0" Diameter 100KHz-2MHz 3WL | 1 | |
| URY.875-1.0/5 | Unirotor (Universal) Y Probe, .875"-1.0" Diameter, 100KHz-2MHz, 5" | 1 | |
| URY.875-1.0/6WL | Unirotor (Universal) Y Probe, .875"-1.0" Diameter, 100KHz-2MHz, 6 "WL | 1 | |
| URY.938-1.063/3WL | Unirotor (Universal) Y Probe, .938"-1.063" Diameter, 100KHz-2MHz, 3 WL | 1 | |
| URY1.0-1.062SS | Unirotor (Universal) Y Probe, 1.0"-1.062" Diameter, 100KHz to 2MHz Stainless Steel | 1 | |
| URY1.0-1.125 | Unirotor (Universal) Y Probe, 1.0"-1.125" Diameter, 100KHz to 2MHz | 1 | |
| URY1.0-1.125/5WL | Unirotor (Universal) Y Probe, 1.0-1.125" Diameter, 100KHz-2MHz, 5"WL | 1 | |
| URY1.0-1.125/6WL | Unirotor (Universal) Y Probe, 1.0"-1.125" Diameter, 100KHz to 2MHz, 6"WL | 1 | |
| URY1.0-1.125SS | Unirotor (Universal) Y Probe, 1.0"-1.125" Diameter, 100KHz to 2MHz Stainless Steel *Spread Won't Work, Use 1.0-1.062SS & 1.062-1.125SS* | 1 | |
| URY1.062-1.125SS | Unirotor (Universal) Y Probe, 1.062"-1.125" Diameter, 100KHz to 2MHz Stainless Steel | 1 | |
| URY1.125-1.250 | Unirotor (Universal) Y Probe, 1.125-1.250" Diameter, 100KHz to 2MHZ | 1 | |
| URY1.250-1.375 | Unirotor (Universal) Y Probe, 1.250-1.375" Diameter, 100KHz to 2MHZ | 1 | |
| URY1.375-1.5/5 | Unirotor (Universal) Y Probe, 1.375-1.50" Diameter, 100KHz-2MHz, 5" | 1 | |
| URY1.375-1.500 | Unirotor (Universal) Y Probe, 1.375-1.500" Diameter, 100KHz to 2MHZ | 1 | |
| URY1.500-1.625 | Unirotor (Universal) Y Probe, 1.500"-1.625" Diameter, 100KHz to 2MHZ | 1 | |
| URY1.625-1.750 | Unirotor (Universal) Y Probe, 1.625"-1.750" Diameter, 100KHz to 2MHZ | 1 | |
| URY1.750-1.875 | Unirotor (Universal) Y Probe, 1.750"-1.875" Diameter, 100KHz to 2MHZ | 1 | |
| URY1.875-2.0 | Unirotor (Universal) Y Probe, 1.875"-2.0" Diameter, 100KHz to 2MHZ | 1 | |
| URY2.375-2.500 | Unirotor (Universal) Y Probe, 2.375"-2.5" Diameter, 100KHz to 2MHZ | 1 | |
| URY24/28 | Unirotor (Universal) Y Probe, 3/8"-7/16" Diameter, 100KHz-2MHz | 1 | |
| URYF.156-.187 | Unirotor (Universal) Y Probe, .156"-.187" Diameter, 100KHz-2MHz 1.5"WL, Shielded | 1 | |
| URYF.250-.281/1.5WL | Unirotor (Universal) Y Probe, .250" - .281" Diameter, 100KHz-2MHz 1.5WL, Shielded | 1 | |
| URYF.250-.281/1.6WL | Unirotor (Universal) Y Probe, .250" - .281" Diameter, 100KHz-2MHz 1.6WL, Shielded | 1 | |
| URYFB 11-13M/SS | Universal Flat Bottom Hole Probe, Adjustable Diameter, Ø11-13mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| URYFB 13-14.5M/SS | Universal Flat Bottom Hole Probe, Adjustable Diameter, Ø13-14.5mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| URYFB 14.5-16M/SS | Universal Flat Bottom Hole Probe, Adjustable Diameter, Ø14.5-16mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| URYFB 16-17.5M/SS | Universal Flat Bottom Hole Probe, Adjustable Diameter, Ø16-17.5mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| URYFB 17.5-19M/SS | Universal Flat Bottom Hole Probe, Adjustable Diameter, Ø17.5-19mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| URYFB 19-20.5M/SS | Universal Flat Bottom Hole Probe, Adjustable Diameter, Ø19-20.5mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| URYFB 20.5-22M/SS | Universal Flat Bottom Hole Probe, Adjustable Diameter, Ø20.5-22mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| URYFB 22-23.5M/SS | Universal Flat Bottom Hole Probe, Adjustable Diameter, Ø22-23.5mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| URYFB 23.5-25M/SS | Universal Flat Bottom Hole Probe, Adjustable Diameter, Ø23.5-25mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| URYFB 3-4M/SS | Universal Flat Bottom Hole Probe, Adjustable Diameter, Ø3.0-4.0mm x 38mm WL, 100KHz-2MHz Stainless Steel | 1 | |
| URYFB 4-5M/SS | Universal Flat Bottom Hole Probe, Adjustable Diameter, Ø4.0-5.0mm x 38mm WL, 100KHz-2MHz stainless steel | 1 | |
| URYFB 5-6.5M/SS | Universal Flat Bottom Hole Probe, Adjustable Diameter, Ø5.0-6.5mm x 38mm WL, 100KHz-2MHz Stainless Steel | 1 | |
| URYFB 6.5-8M/SS | Universal Flat Bottom Hole Probe, Adjustable Diameter, Ø6.5-8mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| URYFB 8-9.5M/SS | Universal Flat Bottom Hole Probe, Adjustable Diameter, Ø8-9.5mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| URYFB 9.5-11M/SS | Universal Flat Bottom Hole Probe, Adjustable Diameter, Ø9.5-11mm x 50mm WL, 100KHz-2MHz STAINLESS STEEL | 1 | |
| UR_156 | BOLT-HOLE PROBE - 100 KHZ-2.0 MHZ FREQUENCY, SHIELDED, 0.156 IN. (3.96 MM) DIAMETER (OLYMPUS NDT OR EQUIVALENT) | 1 | |
| USAVS4-4-1500 | VIDEOSCOPE / BORESCOPE WITH 3.9 MM PROBE, AND 1.5 METRE SCOPE LENGTH. | 1 | |
| UTIPS-15-25-30 | ONE SET OF UNIVERSAL TELESCOPIC INJECTION PROBES 2 | 1 | |
| V260-SM 15/0.125 | DELAY LINE “PENCIL” PROBE UT TRANSDUCER WITH STRAIGHT HANDLE. FREQUENCY 15MHZ, NOMINAL ELEMENT DIAMETER 0.125”. | 1 | |
| VJ128 | VIDEOSCOPE / BORESCOPE WITH 2.8 MM PROBE, AND 1 METER SCOPE LENGTH. | 1 | |
| VM-202RA-1/4 | PROBE , SURFACE, GENERAL PURPOSE, RIGHT ANGLE, 1/8 INCH DIAMETER, 1/4 INCH DROP | 1 | |
| VM101B-1/4 | PROBE , BOLT HOLE 1/14 INCH DIAMETER | 1 | |
| VM101BS-1-4 | SHIELDED BOLT HOLE PROBE 1/4 INCH DIAMETER | 1 | |
| VM101BS-1-8 | 1/8” DIAMETER, FERRITE SHIELDED MANUAL BOLT HOLE PROBE WITH SWIVEL COLLAR, 50-500 KHZ0-2MHZ, MICRODOT CONNECTOR | 1 | |
| VM101BS-15-16 | SHIELDED BOLT HOLE PROBE 15/16 INCH DIAMETER | 1 | |
| VM101BS-3-16 | SHIELDED BOLT HOLE PROBE 3/16 INCH DIAMETER | 1 | |
| VM101BS-7-8 | SHIELDED BOLT HOLE PROBE 7/8 INCH DIAMETER | 1 | |
| VM200 | PROBE; MU METAL SHIELDED | 1 | |
| VM200-3 | PROBE, PENCIL SURFACE, 1/8-INCH DIAMETER, MU METAL SHIELDED, STAINLESS STEEL BODY, VM PRODUCTS | 1 | |
| VM200-3 X 1.0"" | PROBE; MU METAL SHIELDED; 3/16" OD X 1.0" LONG | 1 | |
| VM202RA-1/2 | PROBE; MU METAL SHIELDED; RIGHT ANGLE 1/2" DROP | 1 | |
| VM202RA-3/8 | PROBE; MU METAL SHIELDED; RIGHT ANGLE 3/8" DROP | 1 | |
| VM202RAFX-1/2X6 | SURFACE PENCIL PROBE, FLEXIBLE 90º TIP, 50-500 KHZ FREQUENCY, NFE/FE, ABSOLUTE, SHIELDED, 0.125 IN. (3.175 MM) DIAMETER, 6.0 IN. (152.4 MM) LENGTH, 0.500 IN. (12.7 MM) TIP LENGTH (VM PRODUCTS OR EQUIVALENT). | 1 | |
| VP-9602A | RF MILLIVOLTMETER WITH RF PROBE VQ-093C | 1 | |
| W-MET-U1A/10 | Bowers W-MET-U1A/10 Stand for MET-U1A probe | 1 | |
| WAE77205 | FLEX PROBE ADPTR SET | 1 | |
| WB3505 | ENGINE MASTER PROBE DETECTOR TOOL | 1 | |
| WP-3-1530 | PROBETA | 1 | |
| XPEN45-4 | SURFACE PENCIL PROBE, CRANKED, 45 DEGREE TIP, 50 KHZ TO 500 KHZ FREQUENCY, NFE/FE, ABSOLUTE, SHIELDED, 0.062 IN. (1.57 MM) DIAMETER, 4.000 IN. (101.60 MM) LENGTH, 0.500 IN. (12.70 MM) DROP. (TECHNA NDT OR EQUIVALENT) | 1 | |
| XPENFLX91-10 | PROBE, 90 DEGREE, FREQUENCY RANGE 50 KHZ TO 500 KHZ, NFE/ FE, SHIELDED, ABSOLUTE, 0.062 IN. (1.57 MM) TIP DIAMETER, 10.000 IN. (254.00 MM) LENGTH, 0.100 IN. (2.54 MM) DROP LENGTH (TECHNA NDT OR EQUIVALENT) | 1 | |
| XPENFLX95-10 | PROBE, 90 DEGREE, FREQUENCY RANGE 50 KHZ TO 500 KHZ, NFE/ FE, SHIELDED, ABSOLUTE, 0.062 IN. (1.57 MM) TIP DIAMETER, 10.000 IN. (254.00 MM) LENGTH, 0.500 IN. (12.70 MM) DROP LENGTH. (TECHNA NDT OR EQUIVALENT) | 1 | |
| YA149 | SET, PICK AND PROBE | 1 | |
| Z145P | PROBE, EDDY CURRENT - PENCIL TYPE (OTHER PROBES AVAILABLE, DETERMINE BY APPLICATION) | 1 | |
| Z21-DT6-B | Cable, Z21 to Zetec DT probes, Bridge, 6 Foot | 1 | |
| Z21-DT6-R | Cable, Z21 to Zetec DT probes, Reflection, 6 Foot | 1 | |
| Z23-DT6-B | Cable, MIZ-23 to Zetec DT Probe, 6 Foot | 1 | |
| ZDC1.218 | .218" (7/32") Pilot Zetec Differential Countersink Probe, 100KHZ-1MHZ | 1 | |
| ZFLXD.187/12 | .187" Zetec Flex Probe, 12"L, 100KHZ-1MHZ | 1 | |
| ZFLXD.187/6 | .187" (3/16") Zetec Flex Probe, 6"L, 500KHZ-1MHZ | 1 | |
| ZFLXD.187/9 | .187" (3/16") Zetec Flex Probe, 9"L, 500KHZ-1MHZ | 1 | |
| ZFLXD.250/6 | .250" (1/4") Zetec Flex Probe, 6"L, 500KHZ-1MHZ | 1 | |
| ZFLXD.250/9 | .250" (1/4") Zetec Flex Probe, 9"L, 500KHZ-1MHZ | 1 | |
| ZFLXD.312/9 | .312" (5/16") Zetec Flex Probe, 9"L, 500KHZ-1MHZ | 1 | |
| ZFLXD.375/6 | .375" (3/8") Zetec Flex Probe, 6"L, 500KHZ-1MHZ | 1 | |
| ZFLXD.375/9 | .375" (3/8") Zetec Flex Probe, 9"L, 500KHZ-1MHZ | 1 | |
| ZFLXD.437/6 | .437" (7/16") Zetec Flex Probe, 6"L, 500KHZ-1MHZ | 1 | |
| ZFLXD.437/9 | .437" (7/16") Zetec Flex Probe, 9"L, 500KHZ-1MHZ | 1 | |
| ZFLXD.500/9 | .500" (1/2") Zetec Flex Probe, 9"L, 500KHZ-1MHZ | 1 | |
| ZFLXD.562/9 | .562" (9/16") Zetec Flex Probe, 9"L, 500KHZ-1MHZ | 1 | |
| ZFLXD.625/9 | .625" (5/8") Zetec Flex Probe, 9"L, 500KHZ-1MHZ | 1 | |
| ZFLXD.687/9 | .687" (11/16") Zetec Flex Probe, 9"L, 500KHZ-1MHZ | 1 | |
| ZFLXD.750/9 | .750" (3/4") Zetec Flex Probe, 9"L, 500KHZ-1MHZ | 1 | |
| ZFLXD1.062/9 | 1.062" (1-1/16") Zetec Flex Probe, 9"L, 500KHZ-1MHZ | 1 | |
| ZRD.125 | Zetec Scanner Probe, .125" (1/8") Dia. 500KHZ-1MHZ, Differential, Equivalent 921-8420 | 1 | |
| ZRD.156 | Zetec Scanner Probe, .156" Dia. 500KHZ-1MHZ, Differential | 1 | |
| ZRD.156-1MSS | Zetec Scanner Probe, .156" Dia. 100KHZ-1MHZ, Differential, 1.75" Working Length | 1 | |
| ZRD.176 | Zetec Scanner Probe, .176" (3/17") Dia. 500KHZ-1MHZ, Differential | 1 | |
| ZRD.187 | Zetec Scanner Probe, .187" (3/16") Dia. 500KHZ-1MHZ, Differential, Equivalent 921-8420 | 1 | |
| ZRD.187-1MSS | Zetec Scanner Probe, .187" Dia. 100KHZ-1MHZ, Differential, 1.75" Working Length | 1 | |
| ZRD.190 | Zetec Scanner Probe, .190" Dia. 500KHZ-1MHZ, Differential | 1 | |
| ZRD.218 | Zetec Scanner Probe, .218" Dia. 500KHZ-1MHZ, Differential | 1 | |
| ZRD.250 | Zetec Scanner Probe, .250" (1/4") Dia. 500KHZ-1MHZ, Differential | 1 | |
| ZRD.250-1MSS | Zetec Scanner Probe, .250" Dia. 100KHZ-1MHZ, Differential, 2" Working Length | 1 | |
| ZRD.250/9WL | Zetec Scanner Probe, .250" (1/4") Dia. 500KHZ-1MHZ, Differential, 9" WL | 1 | |
| ZRD.281 | Zetec Scanner Probe, .281" Dia. 500KHZ-1MHZ, Differential | 1 | |
| ZRD.312 | Zetec Scanner Probe, .312" (5/16") Dia. 500KHZ-1MHZ, Differential | 1 | |
| ZRD.375 | Zetec Scanner Probe, .375" (3/8") Dia. 500KHZ-1MHZ, Differential | 1 | |
| ZRD.375/6WL | Zetec Scanner Probe, .375" (3/8") Dia. 100KHZ-1MHZ, Differential | 1 | |
| ZRD.437 | Zetec Scanner Probe, .437" (7/16") Dia. 500KHZ-1MHZ, Differential, Equivalent 921-8420 | 1 | |
| ZRD.437/6WL | Zetec Scanner Probe, .437" (7/16") Dia. 100KHZ-1MHZ, Differential | 1 | |
| ZRD.500 | Zetec Scanner Probe, .500" (1/2") Dia. 500KHZ-1MHZ, Differential, Equivalent 921-8420 | 1 | |
| ZRD.500/6WL | Zetec Scanner Probe, .500" (1/2") Dia. 100KHZ-1MHZ, Differential | 1 | |
| ZRD.562 | Zetec Scanner Probe, .562" (9/16") Dia. 500KHZ-1MHZ, Differential, Equivalent 921-8420 | 1 | |
| ZRDY.125-.156 | Zetec Y Probe, .125"-.156" Diameter, 500KHz, Differential | 1 | |
| ZRDY.125-.156/2M | Zetec Y Probe, .125"-.156" Diameter, 1-3MHz | 1 | |
| ZRDY.187-.250/2M | Zetec Y Probe, .187"-.250" Diameter, 1-3MHz | 1 | |
| ZRDY.750-875 | Zetec Rotor Differential Probe, .750-.875 | 1 | |
| AN2179 | NEEDLE FOR MULTIMETER TEST PROBE | 1 | |
| С22161 | PISTOL GRIP PROBE SET FOR T477W BONDING METER | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
