| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 0000365480 | EN FITTING | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 98D07203020000 | EXTENSION FITTING FR8 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D52109001000 | FITTING REPLACEMENT TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D57004038000 | FIXTURE FIXTURE BORING-CARDEN FITTING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F71203502000 | APPRDEV APPROACH DEVICE - FITTING ENGIN (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98S55305012000 | VTP LOWER FITTING REMPLACEMENT TOOL | 1 | |
| 0000311320 | END FITTING | 1 | |
| 00433-211-000 | PASS ORIENTAL FITTING | 1 | |
| 0235550290 | UNION END FITTING | 1 | |
| 0260601570 | END FITTING | 1 | |
| 0262990030 | SEALING END FITTING | 1 | |
| 0281750120 | END FITTING | 1 | |
| 0298721130 | END FITTING | 1 | |
| 08-4053-0013 | Tronair 08-4053-0013 Engine Compressor Washer (24 gal90.8 l) with MS51522B6S End Fitting (CE) | 6 | |
| 0S22875-3 | SPECIAL END FITTING | 1 | |
| 0U129054 | CENTERING FITTING BUSH | 1 | |
| 0UT8767 | WRENCH-FITTING COVER ASSEMBLY | 1 | |
| 0UT8768 | WRENCH-FITTING BUSH | 1 | |
| 0UT87686 | WRENCH FITTING BUSH | 1 | |
| 1/N-02-384 | Nomad Series N22 & N24 Reference Standard. for the inspection of Wing Strut Upper Fittings, Figure 27 Page 51. Includes Test Report and Certificate of Conformance. | 1 | |
| 10 XHBU-SS | ADAPTER - PRESSURE (5/8-INCH FLARELESS FITTING AT ONE END AND 5/8-INCH | 5 | |
| 1091K2 | GREASE-DISPENSING TIP FOR STANDARD GREASE FITTINGS, 1-1/2" LONG, NPSF THREAD | 1 | |
| 109G5333G01-101 | MGB ANTITORQUE BEAM FITTING REPLACEMENT TOOL KIT | 1 | |
| 10HXBU-SS | ADAPTER PRESSURE 5/8- INCH FLARELESS FITTING AT ONE END 5/8- INCH 37- DEGREE FLARED FITTING AT THE OTHER END | 1 | |
| 10XHBU-SS | ADAPTER - PRESSURE (5/8-INCH FLARELESS FITTING AT ONE END AND 5/8-INCH 37-DEGREE FLARED FITTING AT THE OTHER END) | 5 | |
| 11G-212-28-20-1814 | 7/8” SHORT ARM SUBBY CLIPPED END WRENCH FOR FUEL FITTINGS | 1 | |
| 11PRE65B00040-3 | End Fitting | 1 | |
| 12-1222 | Fitting, (Norgren #124470218) | 2 | |
| 1216-262-400D | FITTING STRUCTURAL COMPONENT BOMB RACK | 1 | |
| 12PRE65B00040-3 | End fitting | 1 | |
| 12XHBU-SS | ADAPTER - PRESSURE (3/4-INCH FLARELESS FITTING AT ONE END AND 3/4-INCH 37-DEGREE FLARED FITTING AT THE OTHER END) | 4 | |
| 13-0541-1 | FITTING-EXTEND,ASSY | 1 | |
| 1470220406 | WRENCH-12FLATS, OPEN END, FOR AN818 FITTINGS | 2 | |
| 14F0209-205 | FITTING-HOLD OPEN ROD | 4 | |
| 15-301B | Heavy-Duty Wet/Dry Vacuums (End widths: 30 Gallon) (Hose fitting: 2") (Volume/maximum: 100 / 120 CFM) (Horsepower: 25 HP) (Maximum suction: 17.0 Hg) (Add to cart: Add To Cart) | 1 | |
| 15-301D | Heavy-Duty Wet/Dry Vacuums (End widths: 30 Gallon) (Hose fitting: 2") (Volume/maximum: 100 / 120 CFM) (Horsepower: 25 HP) (Maximum suction: 17.0 Hg) (Add to cart: Add To Cart) (End widths: 30 Gallon) (Hose fitting: 1-1/2") (Volume/maximum: 60 / 85 CFM) (H | 1 | |
| 15-301DC | Complete Vacuum Kits (End widths: 30 Gallon) (Hose fitting: 1-1/2") (Volume/maximum: 60 / 85 CFM) (Horsepower: 25 HP) (Maximum suction: 16.5 Hg) (Add to cart: Add To Cart) | 1 | |
| 15-551B | Heavy-Duty Wet/Dry Vacuums (End widths: 30 Gallon) (Hose fitting: 2") (Volume/maximum: 100 / 120 CFM) (Horsepower: 25 HP) (Maximum suction: 17.0 Hg) (Add to cart: Add To Cart) (End widths: 30 Gallon) (Hose fitting: 1-1/2") (Volume/maximum: 60 / 85 CFM) (H | 1 | |
| 15-551BC | Complete Vacuum Kits (End widths: 30 Gallon) (Hose fitting: 1-1/2") (Volume/maximum: 60 / 85 CFM) (Horsepower: 25 HP) (Maximum suction: 16.5 Hg) (Add to cart: Add To Cart) (End widths: 55 Gallon) (Hose fitting: 2") (Volume/maximum: 100 / 120 CFM) (Horsepo | 1 | |
| 15-551D | Heavy-Duty Wet/Dry Vacuums (End widths: 30 Gallon) (Hose fitting: 2") (Volume/maximum: 100 / 120 CFM) (Horsepower: 25 HP) (Maximum suction: 17.0 Hg) (Add to cart: Add To Cart) (End widths: 30 Gallon) (Hose fitting: 1-1/2") (Volume/maximum: 60 / 85 CFM) (H | 1 | |
| 15-552B | Heavy-Duty Wet/Dry Vacuums (End widths: 30 Gallon) (Hose fitting: 2") (Volume/maximum: 100 / 120 CFM) (Horsepower: 25 HP) (Maximum suction: 17.0 Hg) (Add to cart: Add To Cart) (End widths: 30 Gallon) (Hose fitting: 1-1/2") (Volume/maximum: 60 / 85 CFM) (H | 1 | |
| 15-552BC | Complete Vacuum Kits (End widths: 30 Gallon) (Hose fitting: 1-1/2") (Volume/maximum: 60 / 85 CFM) (Horsepower: 25 HP) (Maximum suction: 16.5 Hg) (Add to cart: Add To Cart) (End widths: 55 Gallon) (Hose fitting: 2") (Volume/maximum: 100 / 120 CFM) (Horsepo | 1 | |
| 16A11125-1 | PIN - ALIGNMENT - WING TO FUSELAGE ATTACH FITTINGS | 1 | |
| 16A46049-1 | WRENCH KIT, ATTACH FITTING - FORWARD | 2 | |
| 170-55008-701 | OXYGEN FITTING ADAPTER | 1 | |
| 170040-00 | CHARGE VALVE, OXYGENNHA - FITTING - OXYGEN SYSTEM CONNECTOR | 1 | |
| 170042 | FITTING - OXYGEN SYSTEM CONNECTOR | 2 | |
| 170042-00 | FITTING - OXYGEN SYSTEM CONNECTOR | 7 | |
| 173784-00 | ADAPTER OXYGEN FITTING | 3 | |
| 190-03456-001 | FITTING 1, ENGINE MOU | 2 | |
| 190-03457-401 | FITTING 2, ENGINE MOU | 2 | |
| 20201 | END FITTING | 5 | |
| 2001396 | Hydraulic helicopter ground handling wheels for Bell 214ST and other military aircraft.The 002105 are caster wheels for helicopters with fitting on the forward ends of the skid tubes.Specifications: Bell 214ST and other military aircraft Skid tube dia. 4. | 1 | |
| 2001887 | Econo crate (open sided crate) for products fitting on standard pallet. Meets ISPM 15 fumigated wood shipping requirements. | 1 | |
| 23055758 | FITTING - OXYGEN SYSTEM CONNECTOR | 7 | |
| 2510F | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 1 | |
| 2545B-01 | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 1 | |
| 2546C-01 | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 2 | |
| 2546C-02 | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 5 | |
| 269T9281 | Wrench, Splined Fitting | 2 | |
| 293196-1 | Fluid Fitting Alignment Gage | 1 | |
| 29485-S130-1 | OXYGEN CHARGING FITTING | 1 | |
| 30840054-1 | PROTECTIVE CAP, FILL FITTING END | 1 | |
| 3200TC14976 | Bushing Removal Kit-EndFitting/DragStrut | 1 | |
| 32303 | ADJUSTABLE SPANNER DESIGNED FOR MAKING PRECISE ADJUSTMENTS ON CALIBRATION INSTRUMENTS AND FITTINGS. | 1 | |
| 3307248-2 | RUBBER HOSE WITH END FITTING | 1 | |
| 330A93-2022-00 | TOOL,HAFTING END FITTING | 1 | |
| 3401391-69 | EXTRACTOR KIT, HOSE END FITTING | 1 | |
| 348701-1 | FITTING, GENERAL PURPOSE SLING | 1 | |
| 35-92302-0001 | Emergency Exit Fitting Replacement Tool | 1 | |
| 38001-81 | HOSE ASSEMBLY - OXYGEN (24 INCHES LONG WITH FLARELESS CRES END FITTINGS) | 1 | |
| 3G6305G02831 | TOOL KIT, MAIN GEAR BOX UPPER FITTING REPLACEMENT | 1 | |
| 3ME65B94241 | HOIST FITTINGS - CF6-50 ENGINE FAN COWL | 1 | |
| 4-10XHU6-SS MS33514 | ADAPTER - PRESSURE (7/8-INCH FITTING AT ONE END AND AIR SHOP FITTING AT THE OTHER END) | 1 | |
| 4-8XHU6-SS MS33514 | ADAPTER - PRESSURE (3/4-INCH FITTING AT ONE END AND AIR SHOP FITTING AT THE OTHER END) | 1 | |
| 409170-1 | TOOL KIT, HOSE END FITTING | 1 | |
| 410146-1 | TOOL KIT - HOSE END FITTING | 1 | |
| 410DME-10AR-M | 37-DEGREE FLARED FITTING AT THE OTHER END) | 2 | |
| 418W1017-20 | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 8 | |
| 422518 | FITTING END TOOL | 1 | |
| 460006510 | SLAVE END FITTING | 1 | |
| 471-4D | HOSE END FITTING | 8 | |
| 471-6D | HOSE END FITTING | 1 | |
| 4H4721A88 | PIPE END FITTING | 1 | |
| 536181D02R00 | DOUBLERS,ANGLES,FITTING,FASTENER | 1 | |
| 55009 D1 | FITTING - OXYGEN SYSTEM CONNECTOR | 1 | |
| 57A3052 | TRANSDUCER (ENGINE 1 FORWARD MOUNT BULKHEAD FITTINGS) “(45 DEG. IN STEEL) (6.4 X 6.4 MM) | 1 | |
| 6TBD100667 | FITTING-END | 1 | |
| 7011 | DISPENSER - SERVICING, ENGINE OIL DISPENSER - OIL, ONE QUART (1 LITER) CONTAINERFITTING - SERVICE COUPLING, OIL WRENCH - TORQUE | 8 | |
| 705516 | SHRINKING TOOL FOR END FITTING SELF ALIGNING BEARING | 1 | |
| 713293 | POSITIONING OF FIXED END FITTING | 1 | |
| 716183 | CRIMPING END FITTING | 1 | |
| 726631 | CRIMPING OF END FITTING ON BALLJOINT | 1 | |
| 726764 | INSTALLATION OF BALLJOINT ON END FITTING | 1 | |
| 751090 | END FITTING | 1 | |
| 78004-90 | SLING EQUIPMENT - GE90 FAN T/ REV (ATTACH FITTING) | 1 | |
| 801900-308 | END FITTING COMPRESSION TOOL | 1 | |
| 807-4 | CHRISTEN HOSE&FITTING KT 807-4 | 2 | |
| 83GH-12-12 | garden hose fitting | 1 | |
| 856A3330G01 | SET- SEAL FITTINGS TOOL, AGB & TGB OIL NIPPLE- CFM56-3 ENGINE | 12 | |
| 856A3927G01 | END FITTING - TGB GEARSHAFT 32 TEETH | 2 | |
| 85711439-001 | FITTING(SAFETY FITTING CENTER LUG) | 1 | |
| 8XHBU-SS | ADAPTER - FITTING (1/2-INCH FLARELESS FITTING AT ONE END AND 1/2-INCH 37-DEGREE FLARED FITTING AT THE OTHER END) | 4 | |
| 8Z10178-001-58 | TOOL BRACKET REPLACEMENT PCU FITTINGS | 1 | |
| 9132 | END FITTING (FEMAALE) FOR C21003-76 | 1 | |
| 9141 | END FITTING (MALE) | 1 | |
| 9142 | End Fitting (Male) for C21003-76 | 2 | |
| 8815099331 | END-FITTING | 1 | |
| 95-25965-0001 | FITTING STRUCTURAL COMPONENT | 1 | |
| 95-25965-0002 | FITTING STRUCTURAL COMPONENT | 1 | |
| 97A27003000210 | KNURLED END FITTING | 2 | |
| 97A27902016001 | FITTING END ROD | 1 | |
| 97D27208607000 | KIT-REPLACEMENT,ACTUATOR FITTINGS | 1 | |
| 98A29103000000 | ASSY.TOOL HYD.SEAL END FITTING | 13 | |
| 98A52108005000 | FITTING WEAR MEASURMENT | 11 | |
| 98A52108006000 | Wear measuring unit pas-senger door stop fitting | 9 | |
| 98A52207588000 | GAUGE-EMERGENCY EXIT STOP FITTINGS | 1 | |
| 98A52207588001 | GAUGE-EMERGENCY EXIT STOP FITTINGS | 8 | |
| 98A57103024000 | DRILLING GUIDE FOR FITTING REPLACEMENT | 1 | |
| 98D27604000000 | USED TO LOCK THE SPOILERS IN THE EXTENDED POSITION BY FITTING AROUND THE SPOILER ACTUATOR RAM. | 40 | |
| 98D52003000000 | FITTING-NLG AFT DOOR REPLACEMENT FIXTURE | 1 | |
| 98D52109001000 | FITTING REPLACEMENT TOOL | 8 | |
| 98D57004038000 | FIXTURE BORING-CARDEN FITTING | 9 | |
| 98D57004038002 | FIXTURE BORING-CARDEN FITTING | 1 | |
| 98F2900350000 | WRENCH-HYD.FITTING ENGINE PYLON | 1 | |
| 98F29003500000 | WRENCH / HYDRAULIC FITTING - ENGINE | 10 | |
| 98F29003501000 | WRENCH / HYDRAULIC FITTING - ENGINE | 5 | |
| 98F29003502000 | WRENCH / HYDRAULIC FITTING - ENGINE | 7 | |
| 98F29003503000 | WRENCH / HYDRAULIC FITTING - ENGINE | 6 | |
| 98F29003504000 | WRENCH HYD FITTING E | 1 | |
| 98F34103000207 | Fitting-end | 1 | |
| 98F71201010000 | APPROACH DEVICE FITTING - ENGINE, PYLON | 14 | |
| 98F71203502000 | APPROACH DEVICE - FITTING ENGINE/PYLON | 2 | |
| 98L54503016000 | TOOL-BOOTSTRAP FITTING ALIGNMENT | 1 | |
| 98L54503018000 | TOOL-ALIGNMENT,HOISTING FITTING | 2 | |
| 98S28003002200 | END FITTING | 1 | |
| 98S52008501000 | PASSENGER/CARGO DOOR R/I FITTING | 8 | |
| 98S57105003200 | NACEL ATTACHEMENT FITTING WING RIB 10 RH-12 LH | 4 | |
| 98S57105004200 | NACEL ATTACHEMENT FITTING WING RIB 10 RH-12 LH | 4 | |
| 98S71003000222 | ATR / ENG FORWARD FITTING | 1 | |
| 99A53107283000 | AIRBUS A330 REFERENCE STANDARD 7075-T7451 ALUMINUM. PART 4 53-40-18-270-801-A-01 - Bulk Cargo Compartment Door Cut-out Lateral Frame at Bulk Door-Fittings, FR67 at STGR37 and FR69 at STGR38, RH, FIGURE 53-40-18-991-015-A. Includes Test Report and Cer... | 2 | |
| 99D57204105000 | ENGINE FWD PYLON FITTING LUGS | 5 | |
| 99F57204172000 | Airbus A330-300} {A330-200}, 57-29-05 SPIGOT FITTING ATTCHMENT FLANGE AT HOLES 5 AND 11, LH/RH WINGS (2017-02-23 09:21:37) Mateial: 2024-T351. Includes Test Report and Certificate of Conformance. | 2 | |
| 9ME63B10494-1 | TETHER FITTING EQUIPMENT - TAIL SECTION | 1 | |
| A12008-1 | NOZZLE, MLG LUBRICATING NEEDLE COUPLER, EXTENSION, MLG LUBRICATION COUPLER, NEEDLE NOZZLE, MLG LUBRICATION FITTING - LUBRICATION - AFT WHEEL WELL BULKHEAD SPHERICAL BEARING GUN - GREASE | 12 | |
| A27073-1 | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 5 | |
| A28008 | FITTING EQUIPMENT | 1 | |
| A28008-12 | FITTING EQUIPMENT | 3 | |
| A28011-48 | TEST EQUIPMENT - PRESSURE/LEAKAGE, FUEL LINES AND FITTINGS | 1 | |
| A28011-49 | TEST EQUIPMENT - PRESSURE/LEAKAGE, FUEL LINES AND FITTINGS | 1 | |
| A28011-50 | TEST EQUIPMENT - PRESSURE/LEAKAGE, FUEL LINES AND FITTINGS | 1 | |
| A300-27-21-21-0264 | SPECIAL TOOL-RUDDER ATTACHMENT FITTING | 1 | |
| A318-92010-0001 | FITTING ASSY-HINGE ALIGNMENT TOOL | 1 | |
| A318-92010-0002 | FITTING ASSY-HINGE ALIGNMENT TOOL | 1 | |
| A32003-5 | FITTING -0 WELDMENT | 1 | |
| A32003-6 | FITTING -0 WELDMENT | 1 | |
| A32045-48 | PIVOT FITTING SPANNER WRENCH | 6 | |
| A32096-39 | Sensor Index Fitting | 1 | |
| A32099-113 | END FITTING | 1 | |
| A32099-114 | END FITTING | 1 | |
| A32099-16 | END FITTING | 1 | |
| A32099-20 | END FITTING | 1 | |
| A32099-4 | END FITTING ASSY | 1 | |
| A32099-40 | END FITTING ASSY | 1 | |
| A32099-41 | END FITTING ASSY | 1 | |
| A32099-48 | END FITTING | 1 | |
| A32099-49 | END FITTING | 1 | |
| A32099-5 | END FITTING | 1 | |
| A32099-55 | END FITTING | 1 | |
| A32099-56 | END FITTING | 1 | |
| A32099-6 | END FITTING ASSY | 1 | |
| A32099-64 | END FITTING ASSY | 1 | |
| A32099-65 | END FITTING ASSY | 1 | |
| A32099-66 | END FITTING | 1 | |
| A32099-67 | END FITTING | 1 | |
| A32099-7 | END FITTING ASSY | 1 | |
| A32099-70 | End Fitting Assembly | 1 | |
| A32099-71 | End Fitting Assembly | 1 | |
| A32099-73 | END FITTING | 1 | |
| A32099-74 | END FITTING | 1 | |
| A32099-8 | END FITTING ASSY | 1 | |
| A32099-80 | END FITTING | 1 | |
| A32099-81 | END FITTING | 1 | |
| A32099-82 | END FITTING | 1 | |
| A32099-83 | END FITTING | 1 | |
| A32099-84 | End Fitting Assy | 1 | |
| A32099-85 | End Fitting Assy | 1 | |
| A32099-9 | END FITTING | 1 | |
| A32099-96 | END FITTING | 1 | |
| A32099-97 | END FITTING | 1 | |
| A32099-98 | END FITTING | 1 | |
| A32099-99 | END FITTING | 1 | |
| A340-92010-0001 | FITTING ASSY-HINGE ALINGMENT TOOL | 1 | |
| A340-92010-0002 | FITTING ASSY-HINGE ALINGMENT TOOL | 1 | |
| A35002-10 | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 7 | |
| A35002-7 | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 4 | |
| A38003-27 | CLAMP/END-FITTING – HOSE | 1 | |
| A38012-65 | Garden Hose Fitting | 1 | |
| A52002-9 | END FITTING | 1 | |
| A52004-100 | SMALL CARGO DOOR FITTING EQUIPMENT | 2 | |
| A52004-101 | EQUIPMENT - FITTING, FORWARD AND AFT LARGE CARGO DOOR | 4 | |
| A52004-20 | ENTRY DOOR FITTING | 1 | |
| A52004-41 | Fitting Equipment | 8 | |
| A52004-42 | EQUIPMENT - FITTING, LARGE CARGO DOOR | 6 | |
| A52004-45 | Fitting Equipment | 7 | |
| A52004-46 | Fitting Equipment - Door Handling | 5 | |
| A52004-47 | Fitting Equipment - Door Handling | 4 | |
| A52004-55 | FITTING EQUIPMENT_[A52004-55] | 1 | |
| A52028-1 | VERIFICATION EQUIPMENT - MAIN LATCH FITTINGS, LARGE CARGO DOOR | 5 | |
| A52033-1 | VERIFICATION EQUIPMENT - MAIN LATCH FITTINGS, MAIN DECK CARGO DOOR | 2 | |
| A82005-71 | APU SHROUD TEST TOOL END FITTING | 1 | |
| AC21817 | WRENCH USED TO LOOSEN THE END FITTING ASSEMBLIES | 2 | |
| ACTR4150-20 | CENTER TEE FITTING | 1 | |
| ACTR9600-3 | CENTER T FITTING FOR BLOCK | 1 | |
| AF-5221 | CUSTOM HIGH FREQUENCY EDDY CURRENT PROBE FOR EDGE DEFECT DETECTION FOR THE KC10 ARB SUPPORT FITTING. Includes Test Report and Certificate of Conformance. | 1 | |
| AFK-1014 | Custom Ultrasonic Kit, PART 4 53-10-13 for the WING REAR SPAR - STA 663.75 REAR SPAR BULKHEAD SIDE FRAME FITTING FAIL SAFE STRAP. Kit includes 1 of each AFM-560AT & AFS-0541 Transducers, 1 NDT3312 Reference Standard and 1 ABNC-MD6. Supplied with a waterpr | 1 | |
| AFS-1394 | CARGOLUX CUSTOM 5MHz .187", 40° IN ALUMINUM SHEAR WAVE TRANSDUCER WITH A 1.00" RADIUS FOR THE BOEING REFERENCE STANDARD LUG 1B7- FITTING-SEQUENCE CARRIAGE ATTACHMENT INBOARD TRAILING EDGE FLAP. CASE SIZE: .500"L x .270"W x .350". Includes Test Report... | 1 | |
| AIRHOSEKIT | FITTING KIT 3/8X1/4IN W BEND | 1 | |
| AM1928-156 | CF6-80C2B/F ENGINE TRANSPORTATION STAND, WITH FITTINGS FOR BOOTSTRAP | 6 | |
| ANADJ8A | 8" ALUMINUM AN FITTING ADJUSTABLE WRENCH (BLUE-POINT®) (RED) | 1 | |
| AP-AIR290-4 | REPLACEMENT HOSE AND FITTING FOR AP TOOL | 1 | |
| APN 29485-S130-1 | OXYGEN CHARGING FITTING-充氧接头 | 1 | |
| ASK4102-10DP | TOOL KIT FOR REPLACEMENT OF AILERON HINGE FITTING | 1 | |
| ATE2167-004 | TORQUE WRENCH END FITTING | 1 | |
| B07005-1 | TETHER ATTACHMENT FITTINGS - STRUT AIRPLANE RECOVERY | 1 | |
| B19586-3 | ADAPTER -TORQUE WRENCH(RESERVOIR FITTING TO RESERVOIR) | 1 | |
| B20001-12 | ATTACH FITTING EQUIPMENT - WING/HORIZONTAL, STABILIZER SAFETY HARNESS | 1 | |
| B20001-34 | ATTACH FITTING EQUIPMENT - WING/HORIZONTAL, STABILIZER SAFETY HARNESS | 3 | |
| B20001-34 A5867 | ATTACH FITTING EQUIPMENT - UPGRADE | 1 | |
| B20001-34+A5867 | Attach Fitting Equipment - Upgrade | 1 | |
| B27019-3 | END FITTING | 1 | |
| B315790 | TOOL, LUBRICATION FITTING - "EASY OUT", REMOVES BROKEN LUBE FITTINGS AND INSTALLS REPLACEMENTS (1/4"-28) (ALEMITE CORP) | 2 | |
| B32046 | ALIGNMENT PIN -0 MLG AXLE AND TOW FITTING | 1 | |
| B32046-1 | ALIGNMENT PIN - MAIN LANDING GEAR (MLG) AXLE AND TOW FITTING | 2 | |
| B6T-51-001-02 | Floor Fitting Alignment Tool | 1 | |
| B6T-51-001-04 & -05 | Floor Fitting Alignment Tool | 1 | |
| B6T-51-001-34 & -36 | Floor Fitting Alignment Tool | 1 | |
| B6T-51-001-35 | Floor Fitting Alignment Tool | 1 | |
| B71025-13 | END FITTING | 1 | |
| B71025-14 | END FITTING | 1 | |
| BL52563 | FRAME TO CTL FITTING DISPLACEMENT TOOL | 1 | |
| BOF311T2110 | BORING FIXTURE, ENGINE STRUT UPPER SPAR FITTING | 1 | |
| BOF65B02025 | BEARING REPLACEMENT TOOL SET - FLAP FITTING, TRAILING EDGE | 2 | |
| BOF767LS311T4185-214 | 767 GE ENGINE PYLON LWR FITTING | 1 | |
| C0M10946 | ADAPTER PRESSURE 5/8- INCH FLARELESS FITTING AT ONE END 5/8- INCH 37- DEGREE FLARED FITTING AT THE OTHER END | 1 | |
| C107-00-1172 | HANSEN INLET FITTING ADAPTER | 1 | |
| C23002-1 | APPROACH DEVICE FITTING - ENGINE, PYLON | 5 | |
| C27051-15 | END FITTING | 1 | |
| C27051-16 | END FITTING / OPP -15 | 1 | |
| C27051-21 | END FITTING | 1 | |
| C27051-35 | End Fitting | 1 | |
| C27056-10 | LOWER END FITTING | 1 | |
| C27056-11 | UPPER END FITTING | 1 | |
| C27056-13 | END FITTING | 1 | |
| C27056-13-F | END FITTING | 1 | |
| C27056-14 | CENTER FITTING | 1 | |
| C27056-14-F | CENTER FITTING | 1 | |
| C27109 | OFFSET WRENCH KIT - HINGE FITTING, HORIZONTAL STABILIZER | 1 | |
| C27109-1 | OFFSET WRENCH KIT - HINGE FITTING, HORIZONTAL STABILIZER | 2 | |
| C36001-FITTINGS | FITTING FOR ENGINE BLEED AIR SYSTEM TEST EQUIPMENT 737-300 THRU -500 & 757. | 1 | |
| C38002-1 | Plug Equipment - Skin Fitting, Door Sill Drain | 13 | |
| C54010-27 | ENGINE FITTING ASSY | 1 | |
| C54010-27-F | ENGINE FITTING | 1 | |
| C54011-44 | END FITTING | 1 | |
| C54015 | SPANNER WRENCH THRUST REVERSER HINGE FITTING | 1 | |
| C54015-1 | Spanner Wrench - Thrust Reverser Hinge Fitting | 16 | |
| C55007-5 | Fitting Left Green | 1 | |
| C55007-6 | Fitting Right Green | 1 | |
| C71003-227 | ATTACH FITTING -0 WELDMENT | 1 | |
| C71003-228 | ATTACH FITTING -0 WELDMENT | 1 | |
| C71003-3 | FITTING ATTACHMENT 2ea (WITH BALL LOCK PINS 2ea) | 5 | |
| C71020-26 | ENGINE FITTING PIN | 2 | |
| C71020-36 | Aft Engine Fitting Pin | 1 | |
| C71029-63 | AFT engine fitting pin | 1 | |
| C78001-14 | FITTING ASSY HOLD-OPEN | 4 | |
| C78011-62 | FITTING -0 WELDMENT | 1 | |
| CD-4 & 1/2-SC | FILL FITTING END | 1 | |
| CG240-8 | SNAP-ON PULLER ROD WITHOUT END FITTING CG240-8 (PULLER) | 4 | |
| CG250-BA | ROD WITHOUT END FITTING - SNAP-ON | 1 | |
| CG9000033-0033 | CENTER FITTING ASSY | 1 | |
| CG9000033-1129-REVD | CENTER FITTING | 1 | |
| CG9000033-2701-REVH | CENTER FITTING | 1 | |
| CGA-540 X 1/4" NPT | BOTTLE/CYLINDER FITTINGS (OXYGEN) | 1 | |
| CLE23792 | WRENCH FOR END FITTING | 1 | |
| CPWA-32113 | Fitting, scavenge | 1 | |
| D10036-20 | PERMASWAGE PERMANENT FITTING | 1 | |
| D15213 | "DISCHARGE FITTING ALIGNMENT | 1 | |
| DAPT65-0080-00 | NITROGEN FITTING | 4 | |
| DWFP1450D | 1/4" X 50' PREMIUM HYBRID POLYMER BLEND AIR HOSE (INCLUDES 1/4" FACTORY INSTALLED AIR FITTINGS) | 1 | |
| DZZ0023-1 | WRENCH FITTING HINGE AILERON | 2 | |
| DZZ0023-503 | WRENCH FITTING HINGE | 2 | |
| DZZ7197-3 | 9/16 fitting wrenc | 1 | |
| EDWCN635JESP12G | FITTING-END | 1 | |
| F0475652 | END FITTING HEXAGONAL | 1 | |
| F1279974 | END FITTING | 1 | |
| F1400055 | END-FITTING | 1 | |
| F1401977 | M2 END FITTING | 1 | |
| F2015 | SOCKETLESS FITTING BENCH MOUNTED ASSEMBLY MACHINE | 1 | |
| F21874 | FITTING,END- | 1 | |
| F21921 | EXTRACTOR FOR END- FITTING ASSY | 1 | |
| F70312-50 | PIVOT FITTING CROWFOOT WRENCH | 9 | |
| F70335-1 | Line Reaming Tool Set - Entry Door Hinge, Support Fitting | 4 | |
| F712-01006-000W1800-01-PW4168 | ENGINE DUMMY FITTING PW4168 | 1 | |
| F72714-14 | BEAM ASSY - CENTER ENGINE FITTING | 1 | |
| F72714-2 | Fitting Side Eng | 3 | |
| F72754 | STAB RESTRAINING LINE ATTACHMENT FITTING TWO | 1 | |
| F72754-10 | Stab restraining line attachment fitting | 1 | |
| FDOO01-35-42000-000 | To align barrel assy and end fitting (9-250) during assembly | 1 | |
| FE8028-1 | END FITTING | 1 | |
| FILL FITING ENDS | PROTECTIVE CAPS FILL FITTING ENDS. | 1 | |
| FY-07235W09-01 | ADJUSTMENT TOOL FITTING | 1 | |
| G07001-1 | FITTING EQUIPMENT - CABLE SUPPORT, AIRPLANE LIFT RECOVERY | 1 | |
| G07001-37 | FITTING EQUIPMENT - CABLE SUPPORT, AIRPLANE LIFT RECOVERY | 1 | |
| G07003 | TETHER FITTING EQUIPMENT- TAIL SECTION | 1 | |
| G07003-16 | TETHER FITTING EQUIPMENT - TAIL SECTION | 1 | |
| G07003-32 | TETHER FITTING EQUIPMENT - TAIL SECTION | 1 | |
| G07010-1 | TETHER FITTING EQUIPMENT - TAIL SECTION | 1 | |
| G07012-1 | TETHER FITTING EQUIPMENT - OUTBOARD ENGINE, AFT STRUT LOCATION | 2 | |
| G27001-1 | USED AS A LOCK BETWEEN THE ACTUATOR AND THE SPOILER HINGE FITTING TO HOLD SPOILER OPEN AGAINST SYSTEM PRESSURE DURING MAINTENANCERIGGING. | 10 | |
| G27002-1 | USED AS A LOCK BETWEEN THE ACTUATOR AND THE SPOILER HINGE FITTING TO HOLD SPOILER OPEN AGAINST SYSTEM PRESSURE DURING MAINTENANCERIGGING. | 10 | |
| G27036-193 | End Fitting Assy 1 | 1 | |
| G27036-194 | End Fitting Assy 2 | 1 | |
| G27043-152 | End fitting | 1 | |
| G27043-51 | END FITTING | 1 | |
| G27043-52 | END FITTING | 1 | |
| G27079-1 | REMOVAL/INSTALLATION EQUIPMENT - FORWARD ATTACH FITTING, INBOARD TRAILING EDGE FLAPS | 3 | |
| G28012-1 | TEST EQUIPMENT - PRESSURE/LEAKAGE, FUEL LINES AND FITTINGS | 2 | |
| G28018-19 | FITTING TRENT 800 | 1 | |
| G28018-2 | Fitting Assembly - Manifold, Fuel Feed, GE90 Engine | 10 | |
| G28018-31 | FITTING ASSY TRENT800 & 1000 | 1 | |
| G28018-32 | Fitting Assy Genx | 5 | |
| G28018-33 | Fitting assy CF6-80C2/PW4000/GENX-2B | 2 | |
| G28018-4 | FITTING ASSEMBLY - MANIFOLD, FUEL FEED, RB211-524 ENGINES | 3 | |
| G28018-6 | FITTING ASSEMBLY - MANIFOLD, FUEL FEED (GENX-2B, CF6-80C2, PW4000, OR GE9X ENGINES) | 4 | |
| G28018-61 | FITTING ASSEMBLY - MANIFOLD, FUEL FEED, (TRENT 800 OR TRENT 1000 ENGINES) | 4 | |
| G28018-65 | Fitting assy CF6-80C2/PW4000/GENX-2B/GE9X | 3 | |
| G28018-7 | FITTING ASSY TRENT 8 | 6 | |
| G32004-5 | GAGE EQUIPMENT - TRUNNION AND DRAG LINK FITTING INSTALLATION, NOSE LANDING GEAR | 6 | |
| G32005-8 | GAGE EQUIPMENT - BUSHING ASSEMBLY INSTALLATION, VERTICAL SUPPORT FITTING, INBOARD ASSEMBLY | 6 | |
| G36035-14 | PRSOV TEST FITTING B767-P&W 4000 ENGINE | 1 | |
| G36035-36 | GE & PW FITTINGS BOX - PNEUMATIC SYSTEMHEALTH CHECK TEST EQUIPMENT | 13 | |
| G52025 | ALIGNMENT EQUIPMENT -0 LATCH FITTINGS | 1 | |
| G52025-1 | ALIGNMENT EQUIPMENT - LATCH FITTINGS | 1 | |
| G54016-41 | End fitting | 1 | |
| G601R710010-1 | PROTECTOR - AFT ENGINE MOUNT (THRUST FITTING) | 7 | |
| G601R710010−1 | Protector − AFT Engine Mount (Thrust Fitting) | 7 | |
| G71001-167 | TENSION FITTING | 1 | |
| G71001-95 | TENSION FITTING | 1 | |
| G71003-16 | ENG 2 & 3 BRACE FITTING ASSY | 1 | |
| G71003-161 | ENG 1 & 4 UPR ARM SWIVEL FITTING ASSY | 1 | |
| G71003-177 | ENG 2 & 3 UPR INBD ARM FITTING ASSY | 1 | |
| G71003-178 | ENG 2 & 3 UPR OUTBD ARM FITTING ASSY | 1 | |
| G71003-20 | ENG 1 & 4 BRACE FITTING ASSY | 1 | |
| G71003-206 | FITTING WELDMENT | 1 | |
| G71003-94 | ENG 2 & 3 OUTBD FITTING ASSY | 1 | |
| G71010-82 | ENGINE ATTACH FITTING | 1 | |
| GA4734-240 | END FITTING | 1 | |
| GA47340-240 | END FITTING | 3 | |
| GA47834-24 | END FITTING | 1 | |
| GA47834-240 | END FITTING | 1 | |
| GB25-6K-BM-N | GAUGE, PRESSURE 1/4 IN NPT FITTING - MFG: LENZ COMPANY - P/N# GB25-6K-BM-N | 1 | |
| GEDORE-012740 | GEDORE 012740 HEX SETTING ADAPTOR, TORQUE WRENCH END FITTINGS (CAPTIVE PIN) | 1 | |
| GP00093 | ADAPTER TORQUE WRENCH BOTTLE FITTING TO VALVE BODY | 1 | |
| GSE168 | FITTING - OXYGEN SYSTEM CONNECTOR | 1 | |
| Gedore-012000 | Gedore 012000 3.2mm TB OPEN END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012005 | Gedore 012005 4mm (5/32") TB OPEN END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012015 | Gedore 012015 5.5mm TB OPEN END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012020 | Gedore 012020 6mm TB OPEN END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012025 | Gedore 012025 7mm TB OPEN END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012030 | Gedore 012030 8mm TB OPEN END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012035 | Gedore 012035 9mm TB OPEN END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012040 | Gedore 012040 10mm TB OPEN END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012045 | Gedore 012045 11mm TB OPEN END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012050 | Gedore 012050 12mm TB OPEN END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012055 | Gedore 012055 13mm TB OPEN END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012060 | Gedore 012060 14mm TB OPEN END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012065 | Gedore 012065 15mm TB OPEN END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012070 | Gedore 012070 16mm TB OPEN END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012075 | Gedore 012075 17mm TB OPEN END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012080 | Gedore 012080 18mm TB OPEN END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012085 | Gedore 012085 19mm TB OPEN END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012090 | Gedore 012090 20mm TB OPEN END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012095 | Gedore 012095 21mm TB OPEN END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012100 | Gedore 012100 22mm TB OPEN END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012105 | Gedore 012105 23mm TB OPEN END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012110 | Gedore 012110 24mm TB OPEN END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012115 | Gedore 012115 25mm TB OPEN END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012150 | Gedore 012150 5/32 (4mm) TB OPEN END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012155 | Gedore 012155 3/16 TB OPEN END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012160 | Gedore 012160 7/32 TB OPEN END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012165 | Gedore 012165 1/4 TB OPEN END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012175 | Gedore 012175 5/16 TB OPEN END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012185 | Gedore 012185 3/8 TB OPEN END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012195 | Gedore 012195 7/16 TB OPEN END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012200 | Gedore 012200 1/2 TB OPEN END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012205 | Gedore 012205 9/16 TB OPEN END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012210 | Gedore 012210 5/8 TB OPEN END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012215 | Gedore 012215 11/16 TB OPEN END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012220 | Gedore 012220 3/4 TB OPEN END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012225 | Gedore 012225 13/16 TB OPEN END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012230 | Gedore 012230 7/8 TB OPEN END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012235 | Gedore 012235 15/16 TB OPEN END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012240 | Gedore 012240 1in. TB OPEN END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012250 | Gedore 012250 3.2mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012255 | Gedore 012255 4mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012260 | Gedore 012260 5mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012265 | Gedore 012265 5.5mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012270 | Gedore 012270 6mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012275 | Gedore 012275 7mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012280 | Gedore 012280 8mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012285 | Gedore 012285 9mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012290 | Gedore 012290 10mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012295 | Gedore 012295 11mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012300 | Gedore 012300 12mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012305 | Gedore 012305 13mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012310 | Gedore 012310 14mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012315 | Gedore 012315 15mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012320 | Gedore 012320 16mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012325 | Gedore 012325 17mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012330 | Gedore 012330 18mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012335 | Gedore 012335 19mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012340 | Gedore 012340 20mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012345 | Gedore 012345 21mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012350 | Gedore 012350 22mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012355 | Gedore 012355 23mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012360 | Gedore 012360 24mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012365 | Gedore 012365 25mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012400 | Gedore 012400 5/32 TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012405 | Gedore 012405 3/16 TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012410 | Gedore 012410 7/32 TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012415 | Gedore 012415 1/4 TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012420 | Gedore 012420 5/16 TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012425 | Gedore 012425 3/8 TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012430 | Gedore 012430 7/16 TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012435 | Gedore 012435 1/2 TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012440 | Gedore 012440 9/16 TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012445 | Gedore 012445 5/8 TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012450 | Gedore 012450 11/16 TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012455 | Gedore 012455 3/4 TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012460 | Gedore 012460 13/16 TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012465 | Gedore 012465 7/8 TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012470 | Gedore 012470 15/16 TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012475 | Gedore 012475 1in. TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012505 | Gedore 012505 8mm TB FLARED END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012510 | Gedore 012510 9mm TB FLARED END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012515 | Gedore 012515 10mm TB FLARED END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012520 | Gedore 012520 11mm TB FLARED END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012525 | Gedore 012525 12mm TB FLARED END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012530 | Gedore 012530 13mm TB FLARED END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012535 | Gedore 012535 14mm TB FLARED END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012540 | Gedore 012540 15mm TB FLARED END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012545 | Gedore 012545 16mm TB FLARED END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012550 | Gedore 012550 17mm TB FLARED END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012555 | Gedore 012555 19mm TB FLARED END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012560 | Gedore 012560 22mm TB FLARED END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012565 | Gedore 012565 24mm TB FLARED END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012600 | Gedore 012600 1/4 TB FLARED END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012605 | Gedore 012605 5/16 TB FLARED END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012610 | Gedore 012610 3/8 TB FLARED END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012615 | Gedore 012615 7/16 TB FLARED END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012620 | Gedore 012620 1/2 TB FLARED END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012625 | Gedore 012625 9/16 TB FLARED END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012630 | Gedore 012630 5/8 TB FLARED END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012635 | Gedore 012635 3/4 TB FLARED END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012640 | Gedore 012640 7/8 TB FLARED END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012645 | Gedore 012645 1in. TB FLARED END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012700 | Gedore 012700 HEX SETTING ADAPTOR 3.2-5.5 mm, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012705 | Gedore 012705 HEX SETTING ADAPTOR 6-9 mm, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012710 | Gedore 012710 HEX SETTING ADAPTOR 10-13 mm, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012715 | Gedore 012715 HEX SETTING ADAPTOR 14-17 mm, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012720 | Gedore 012720 HEX SETTING ADAPTOR 18-21 mm, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012722 | Gedore 012722 HEX SETTING ADAPTOR 22-25 mm, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012725 | Gedore 012725 HEX SETTING ADAPTOR, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012730 | Gedore 012730 HEX SETTING ADAPTOR, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012735 | Gedore 012735 HEX SETTING ADAPTOR, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012740 | Gedore 012740 HEX SETTING ADAPTOR, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-026020 | Gedore 026020 7 mm OPEN END 8791-07, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-026040 | Gedore 026040 8 mm OPEN END 8791-08, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-026060 | Gedore 026060 9 mm OPEN END 8791-09, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-026080 | Gedore 026080 10 mm OPEN END 8791-10, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-026100 | Gedore 026100 11 mm OPEN END 8791-11, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-026120 | Gedore 026120 12 mm OPEN END 8791-12, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-026140 | Gedore 026140 13 mm OPEN END 8791-13, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-026160 | Gedore 026160 14 mm OPEN END 8791-14, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-026180 | Gedore 026180 15 mm OPEN END 8791-15, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-026200 | Gedore 026200 16 mm OPEN END 8791-16, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-026220 | Gedore 026220 17 mm OPEN END 8791-17, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-026240 | Gedore 026240 18 mm OPEN END 8791-18, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-026260 | Gedore 026260 19 mm OPEN END 8791-19, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-026280 | Gedore 026280 20 mm OPEN END 8791-20, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-026300 | Gedore 026300 21 mm OPEN END 8791-21, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-026320 | Gedore 026320 22 mm OPEN END 8791-22, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-026340 | Gedore 026340 23 mm OPEN END, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-026360 | Gedore 026360 24 mm OPEN END 8791-24, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-026380 | Gedore 026380 25 mm OPEN END, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-026420 | Gedore 026420 27 mm OPEN END 8791-27, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-026440 | Gedore 026440 30 mm OPEN END 8791-30, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-026460 | Gedore 026460 32 mm OPEN END 8791-32, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-026620 | Gedore 026620 5/16" OPEN END 8791-5/16AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-026640 | Gedore 026640 3/8'' OPEN END 8791-3/8AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-026650 | Gedore 026650 7/16" OPEN END 8791-7/16AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-026660 | Gedore 026660 1/2" OPEN END 8791-1/2AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-026680 | Gedore 026680 9/16" OPEN END 8791-9/16AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-026690 | Gedore 026690 5/8" OPEN END 8791-5/8AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-026700 | Gedore 026700 11/16" OPEN END 8791-11/16AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-026710 | Gedore 026710 3/4" OPEN END 8791-3/4AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-026720 | Gedore 026720 13/16" OPEN END 8791-13/16"AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-026740 | Gedore 026740 7/8" OPEN END 8791-7/8", Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-026750 | Gedore 026750 15/16" OPEN END 8791-15/16AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-026760 | Gedore 026760 1" OPEN END 8791-1 " AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-026770 | Gedore 026770 1 1/16" OPEN END 8791-1.1/16AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-026780 | Gedore 026780 1 1/8" OPEN END 8791-1.1/8AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-026800 | Gedore 026800 1 3/16" OPEN END 8791-1.3/16AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-026820 | Gedore 026820 1 1/4" OPEN END 8791-1.1/4AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027220 | Gedore 027220 7 mm RING END 8792-07, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027240 | Gedore 027240 8 mm RING END 8792-08, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027260 | Gedore 027260 9 mm RING END 8792-09, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027280 | Gedore 027280 10 mm RING END 8792-10, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027300 | Gedore 027300 11 mm RING END 8792-11, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027320 | Gedore 027320 12 mm RING END 8792-12, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027340 | Gedore 027340 13 mm RING END 8792-13, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027360 | Gedore 027360 14 mm RING END 8792-14, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027380 | Gedore 027380 15 mm RING END 8792-15, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027400 | Gedore 027400 16 mm RING END 8792-16, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027420 | Gedore 027420 17 mm RING END 8792-17, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027440 | Gedore 027440 18 mm RING END 8792-18, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027460 | Gedore 027460 19 mm RING END 8792-19, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027480 | Gedore 027480 20 mm RING END 8792-20, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027500 | Gedore 027500 21 mm RING END 8792-21, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027520 | Gedore 027520 22 mm RING END 8792-22, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027540 | Gedore 027540 23 mm RING END 8792-23, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027560 | Gedore 027560 24 mm RING END 8792-24, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027600 | Gedore 027600 26 mm RING END 8792-26, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027620 | Gedore 027620 27 mm RING 8792-27, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027720 | Gedore 027720 5/16" RING END 8792-5/16AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027740 | Gedore 027740 3/8" RING END 8792-3/8AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027750 | Gedore 027750 7/16" RING END 8792-7/16AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027760 | Gedore 027760 1/2" RING END 8792-1/2AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027780 | Gedore 027780 9/16" RING END 8792-9/16AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027790 | Gedore 027790 5/8" RING END 8792-5/8AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027800 | Gedore 027800 11/16" RING END 8792-11/16AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027810 | Gedore 027810 3/4" RING END 8792-3/4AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027820 | Gedore 027820 13/16" RING END 8792-13/16AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027840 | Gedore 027840 7/8" RING END 8792-7/8AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027850 | Gedore 027850 15/16" RING END 8792-15/16AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027860 | Gedore 027860 1" RING END 8792-1AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027880 | Gedore 027880 1 1/16" RING END 8792-1.1/16AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027920 | Gedore 027920 1 3/16" RING END, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-028190 | Gedore 028190 7 mm FLARED END 8797-07, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-028200 | Gedore 028200 8 mm FLARED END 8797-08, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-028210 | Gedore 028210 9 mm FLARED END 8797-09, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-028220 | Gedore 028220 10 mm FLARED END 8797-10, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-028240 | Gedore 028240 11 mm FLARED END 8797-11, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-028260 | Gedore 028260 12 mm FLARED END 8797-12, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-028280 | Gedore 028280 13 mm FLARED END 8797-13, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-028300 | Gedore 028300 14 mm FLARED END 8797-14, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-028320 | Gedore 028320 15 mm FLARED END 8797-15, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-028340 | Gedore 028340 16 mm FLARED END 8797-16, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-028360 | Gedore 028360 17 mm FLARED END 8797-17, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-028380 | Gedore 028380 18 mm FLARED END 8797-18, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-028400 | Gedore 028400 19 mm FLARED END 8797-19, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-028420 | Gedore 028420 20 mm FLARED END 8797-20, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-028440 | Gedore 028440 21 mm FLARED END 8797-21, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-028460 | Gedore 028460 22 mm FLARED END 8797-22, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-028480 | Gedore 028480 23 mm FLARED END 8797-23, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-028500 | Gedore 028500 24 mm FLARED END 8797-24, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-028520 | Gedore 028520 27 mm FLARED END 8797-27, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-028600 | Gedore 028600 3/8'' FLARED END 8797-3/8AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-028620 | Gedore 028620 7/16'' FLARED END 8797-7/16AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-028640 | Gedore 028640 1/2'' FLARED END 8797-1/2AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-028660 | Gedore 028660 9/16'' FLARED END 8797-9/16AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-028680 | Gedore 028680 5/8'' FLARED END 8797-5/8AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-028700 | Gedore 028700 11/16''FLARED END 8797-11/16AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-028710 | Gedore 028710 3/4'' FLARED END 8797-3/4AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-028720 | Gedore 028720 13/16''FLARED END 8797-13/16AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-028740 | Gedore 028740 7/8'' FLARED END 8797-7/8AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-028750 | Gedore 028750 15/16''FLARED END 8797-15/16AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-028760 | Gedore 028760 1'' FLARED END 8797-1AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-028770 | Gedore 028770 1 1/16''FLAREEND 8797-1.1/16AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-028780 | Gedore 028780 1'' 1/8 FLARED END, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-028800 | Gedore 028800 1 3/16'' FLARED END, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-049000 | Gedore 049000 3.2mm O/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049005 | Gedore 049005 4mm O/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049010 | Gedore 049010 5mm O/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049015 | Gedore 049015 5.5mm O/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049020 | Gedore 049020 6mm O/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049025 | Gedore 049025 7mm O/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049030 | Gedore 049030 8mm O/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049035 | Gedore 049035 9mm O/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049040 | Gedore 049040 10mm O/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049045 | Gedore 049045 11mm O/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049050 | Gedore 049050 12mm O/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049055 | Gedore 049055 13mm O/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049060 | Gedore 049060 14mm O/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049065 | Gedore 049065 15mm O/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049070 | Gedore 049070 16mm O/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049075 | Gedore 049075 17mm O/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049080 | Gedore 049080 18mm O/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049085 | Gedore 049085 19mm O/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049090 | Gedore 049090 20mm O/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049095 | Gedore 049095 21mm O/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049100 | Gedore 049100 22mm O/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049105 | Gedore 049105 23mm O/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049110 | Gedore 049110 24mm O/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049115 | Gedore 049115 25mm O/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049150 | Gedore 049150 5/32 O/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049155 | Gedore 049155 3/16 O/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049160 | Gedore 049160 7/32 O/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049165 | Gedore 049165 1/4 O/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049175 | Gedore 049175 5/16 O/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049185 | Gedore 049185 3/8 O/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049195 | Gedore 049195 7/16 O/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049200 | Gedore 049200 1/2 O/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049205 | Gedore 049205 9/16 O/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049210 | Gedore 049210 5/8 O/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049215 | Gedore 049215 11/16 O/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049220 | Gedore 049220 3/4 O/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049225 | Gedore 049225 13/16 O/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049230 | Gedore 049230 7/8 O/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049235 | Gedore 049235 15/16 O/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049240 | Gedore 049240 1in O/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049250 | Gedore 049250 3.2mm R/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049255 | Gedore 049255 4mm R/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049260 | Gedore 049260 5mm R/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049265 | Gedore 049265 5.5mm R/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049270 | Gedore 049270 6mm R/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049275 | Gedore 049275 7mm R/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049280 | Gedore 049280 8mm R/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049285 | Gedore 049285 9mm R/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049290 | Gedore 049290 10mm R/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049295 | Gedore 049295 11mm R/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049300 | Gedore 049300 12mm R/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049305 | Gedore 049305 13mm R/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049310 | Gedore 049310 14mm R/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049315 | Gedore 049315 15mm R/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049320 | Gedore 049320 16mm R/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049325 | Gedore 049325 17mm R/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049330 | Gedore 049330 18mm R/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049335 | Gedore 049335 19mm R/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049340 | Gedore 049340 20mm R/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049345 | Gedore 049345 21mm R/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049350 | Gedore 049350 22mm R/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049355 | Gedore 049355 23mm R/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049360 | Gedore 049360 24mm R/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049365 | Gedore 049365 25mm R/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049400 | Gedore 049400 5/32 R/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049405 | Gedore 049405 3/16 R/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049410 | Gedore 049410 7/32 R/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049415 | Gedore 049415 1/4 R/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049420 | Gedore 049420 5/16 R/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049425 | Gedore 049425 3/8 R/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049430 | Gedore 049430 7/16 R/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049435 | Gedore 049435 1/2 R/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049440 | Gedore 049440 9/16 R/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049445 | Gedore 049445 5/8 R/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049450 | Gedore 049450 11/16 R/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049455 | Gedore 049455 3/4 R/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049460 | Gedore 049460 13/16 R/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049465 | Gedore 049465 7/8 R/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049470 | Gedore 049470 15/16 R/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049475 | Gedore 049475 1in R/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049505 | Gedore 049505 8mm F/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049510 | Gedore 049510 9mm F/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049515 | Gedore 049515 10mm F/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049520 | Gedore 049520 11mm F/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049525 | Gedore 049525 12mm F/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049530 | Gedore 049530 13mm F/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049535 | Gedore 049535 14mm F/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049540 | Gedore 049540 15mm F/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049545 | Gedore 049545 16mm F/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049550 | Gedore 049550 17mm F/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049555 | Gedore 049555 19mm F/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049560 | Gedore 049560 22mm F/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049565 | Gedore 049565 24mm F/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049600 | Gedore 049600 1/4 F/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049605 | Gedore 049605 5/16 F/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049610 | Gedore 049610 3/8 F/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049615 | Gedore 049615 7/16 F/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049620 | Gedore 049620 1/2 F/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049625 | Gedore 049625 9/16 F/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049630 | Gedore 049630 5/8 F/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049635 | Gedore 049635 3/4 F/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049640 | Gedore 049640 7/8 F/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-049645 | Gedore 049645 1in F/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot) | 1 | |
| Gedore-7672630 | Gedore 7672630 9x12 RECTANGULAR 1/4 FIXED HEAD SQUARE, Torque Wrench End Fittings | 1 | |
| Gedore-7672710 | Gedore 7672710 9x12 RECTANGULAR 1/4 REVERSIBLE RATCHET HEAD, Torque Wrench End Fittings | 1 | |
| Gedore-7677940 | Gedore 7677940 9x12 RECTANGULAR RING END FITTING A/F 12, Torque Wrench End Fittings | 1 | |
| Gedore-7678080 | Gedore 7678080 9x12 RECTANGULAR RING END FITTING A/F 16, Torque Wrench End Fittings | 1 | |
| Gedore-7678160 | Gedore 7678160 9x12 RECTANGULAR RING END FITTING A/F 18, Torque Wrench End Fittings | 1 | |
| Gedore-7678240 | Gedore 7678240 9x12 RECTANGULAR RING END FITTING A/F 21, Torque Wrench End Fittings | 1 | |
| Gedore-7679050 | Gedore 7679050 9x12 RECTANGULAR OPEN END FITTING A/F 9, Torque Wrench End Fittings | 1 | |
| Gedore-7679210 | Gedore 7679210 9x12 RECTANGULAR FLARED END FITTING A/F 13, Torque Wrench End Fittings | 1 | |
| Gedore-7679480 | Gedore 7679480 9x12 RECTANGULAR FLARED END FITTING A/F 14, Torque Wrench End Fittings | 1 | |
| Gedore-7679560 | Gedore 7679560 9x12 RECTANGULAR OPEN END FITTINGg A/F 12, Torque Wrench End Fittings | 1 | |
| Gedore-7679640 | Gedore 7679640 9x12 RECTANGULAR FLARED END FITTING A/F 18, Torque Wrench End Fittings | 1 | |
| Gedore-7679720 | Gedore 7679720 9x12 RECTANGULAR FLARED END FITTING A/F 22, Torque Wrench End Fittings | 1 | |
| Gedore-7679800 | Gedore 7679800 9x12 RECTANGULAR 3/8 FIXED HEAD SQUARE, Torque Wrench End Fittings | 1 | |
| Gedore-7679990 | Gedore 7679990 9x12 RECTANGULAR OPEN END FITTING A/F 16, Torque Wrench End Fittings | 1 | |
| Gedore-7684560 | Gedore 7684560 9x12 RECTANGULAR OPEN END FITTING A/F 18, Torque Wrench End Fittings | 1 | |
| Gedore-7685290 | Gedore 7685290 9x12 RECTANGULAR FLARED END FITTING A/F 10, Torque Wrench End Fittings | 1 | |
| Gedore-7685370 | Gedore 7685370 9x12 RECTANGULAR FLARED END FITTING A/F 11, Torque Wrench End Fittings | 1 | |
| Gedore-7685880 | Gedore 7685880 9x12 RECTANGULAR FLARED END FITTINGA/F 17, Torque Wrench End Fittings | 1 | |
| Gedore-7686260 | Gedore 7686260 9x12 RECTANGULAR FLARED END FITTING A/F 19, Torque Wrench End Fittings | 1 | |
| Gedore-7686500 | Gedore 7686500 9x12 RECTANGULAR 3/8 REVERSIBLE RATCHET HEAD, Torque Wrench End Fittings | 1 | |
| Gedore-7687230 | Gedore 7687230 9x12 RECTANGULAR 1/2 REVERSIBLE RATCHET HEAD, Torque Wrench End Fittings | 1 | |
| Gedore-7687900 | Gedore 7687900 9x12 RECTANGULAR 1/2 FIXED HEAD SQUARE, Torque Wrench End Fittings | 1 | |
| Gedore-7688390 | Gedore 7688390 9x12 RECTANGULAR OPEN END FITTING A/F 7, Torque Wrench End Fittings | 1 | |
| Gedore-7688550 | Gedore 7688550 9x12 RECTANGULAR OPEN END FITTING A/F 8, Torque Wrench End Fittings | 1 | |
| Gedore-7688630 | Gedore 7688630 9x12 RECTANGULAR OPEN END FITTING A/F 10, Torque Wrench End Fittings | 1 | |
| Gedore-7688980 | Gedore 7688980 9x12 RECTANGULAR OPEN END FITTING A/F 11, Torque Wrench End Fittings | 1 | |
| Gedore-7689010 | Gedore 7689010 9x12 RECTANGULAR OPEN END FITTING A/F 13, Torque Wrench End Fittings | 1 | |
| Gedore-7689360 | Gedore 7689360 9x12 RECTANGULAR OPEN END FITTING A/F 14, Torque Wrench End Fittings | 1 | |
| Gedore-7689440 | Gedore 7689440 9x12 RECTANGULAR OPEN END FITTING A/F 15, Torque Wrench End Fittings | 1 | |
| Gedore-7689600 | Gedore 7689600 9x12 RECTANGULAR OPEN END FITTING A/F 17, Torque Wrench End Fittings | 1 | |
| Gedore-7689790 | Gedore 7689790 9x12 RECTANGULAR OPEN END FITTING A/F 19, Torque Wrench End Fittings | 1 | |
| Gedore-7691340 | Gedore 7691340 9x12 RECTANGULAR RING END FITTING A/F 7, Torque Wrench End Fittings | 1 | |
| Gedore-7691420 | Gedore 7691420 9x12 RECTANGULAR RING END FITTING A/F 8, Torque Wrench End Fittings | 1 | |
| Gedore-7691690 | Gedore 7691690 9x12 RECTANGULAR RING END FITTING A/F 10, Torque Wrench End Fittings | 1 | |
| Gedore-7691770 | Gedore 7691770 9x12 RECTANGULAR RING END FITTING A/F 11, Torque Wrench End Fittings | 1 | |
| Gedore-7691930 | Gedore 7691930 9x12 RECTANGULAR RING END FITTING A/F 13, Torque Wrench End Fittings | 1 | |
| Gedore-7692230 | Gedore 7692230 9x12 RECTANGULAR RING END FITTING A/F 14, Torque Wrench End Fittings | 1 | |
| Gedore-7692580 | Gedore 7692580 9x12 RECTANGULAR RING END FITTING A/F 15, Torque Wrench End Fittings | 1 | |
| Gedore-7692740 | Gedore 7692740 9x12 RECTANGULAR RING END FITTING A/F 17, Torque Wrench End Fittings | 1 | |
| Gedore-7692820 | Gedore 7692820 9x12 RECTANGULAR RING END FITTING A/F 19, Torque Wrench End Fittings | 1 | |
| Gedore-7693040 | Gedore 7693040 9x12RECTANGULAR RING END FITTING A/F 22, Torque Wrench End Fittings | 1 | |
| Gedore-7699590 | Gedore 7699590 9x12 RECTANGULAR FLARED END FITTING A/F 12, Torque Wrench End Fittings | 1 | |
| Gedore-A28990 | Gedore A28990 1/4 SD RATCHET ATB 8mm SPIGOT, Torque Wrench End Fittings | 1 | |
| Gedore-A29071 | Gedore A29071 1/4 SD FIXED - ATB 8mm SPIGOT, Torque Wrench End Fittings | 1 | |
| Gedore-A36340 | Gedore A36340 1/4 TB SQUARE DRIVE, Torque Wrench End Fittings | 1 | |
| Gedore-A37610 | Gedore A37610 HEX ADAPTOR 1 - 2.5mm, Torque Wrench End Fittings | 1 | |
| Gedore-A37620 | Gedore A37620 HEX ADAPTOR 3 - 5mm, Torque Wrench End Fittings | 1 | |
| Gedore-A38350 | Gedore A38350 HEX ADAPTOR 6-8mm, Torque Wrench End Fittings | 1 | |
| Gedore-A45271 | Gedore A45271 SETTING ADAPT - HEX 1.0-2.5mm, Torque Wrench End Fittings | 1 | |
| Gedore-A45272 | Gedore A45272 SETTING ADAPT - HEX 3.0-5.0mm, Torque Wrench End Fittings | 1 | |
| Gedore-A45273 | Gedore A45273 SETTING ADAPT - HEX 6.0-8.0mm, Torque Wrench End Fittings | 1 | |
| Gedore-A64440 | Gedore A64440 PLAIN END- SHORT, Torque Wrench End Fittings | 1 | |
| Gedore-A64450 | Gedore A64450 PLAIN END - LONG, Torque Wrench End Fittings | 1 | |
| Gedore-A73640 | Gedore A73640 1/4 TB RATCHET, Torque Wrench End Fittings | 1 | |
| H47025 | End Fitting | 6 | |
| H47827 | HOLDING TOOL FOR END FITTING | 1 | |
| HLA5854-P-D | Inflation Handle with Two Flexible Extensions (One with Standard Fitting and One with High Flow Fitting) in Transport Cases | 1 | |
| HLA5854-PS-GS | Inflation Handle with Two Flexible Extensions (One with Standard Fitting with Safety and One with High Flow Fitting with Safety) in Transport Cases | 1 | |
| HU44533 | 37-DEGREE FLARED FITTING AT THE OTHER END) | 3 | |
| J27035-11 | END FITTING | 1 | |
| J27035-11-M | END FITTING | 1 | |
| J27035-14 | END FITTING | 1 | |
| J27035-17 | END FITTING | 1 | |
| J27035-19 | END FITTING | 1 | |
| J27035-19-M | END FITTING | 1 | |
| J27035-22 | END FITTING | 1 | |
| J27035-22-M | END FITTING | 1 | |
| J27035-24 | END FITTING | 1 | |
| J27035-24-M | END FITTING TRACK | 1 | |
| J27035-27 | END FITTING | 1 | |
| J27035-27-M | END FITTING | 1 | |
| J27035-47 | END FITTING | 1 | |
| J27035-47-M | END FITTING | 1 | |
| J27035-65 | END FITTING | 1 | |
| J27035-8 | END FITTING | 1 | |
| J27035-8-M | END FITTING | 1 | |
| J28001-1 | FITTING EQUIPMENT - FUEL DRAIN SUMP | 4 | |
| J28012-13 | B777 CENTER FUEL TANK SUMP DRAIN FITTING TOOL | 3 | |
| J28013-1 | FITTING EQUIPMENT - FUEL DRAIN SUMP | 18 | |
| J32037-95 | SPRING END FITTING | 1 | |
| J32037-96 | ROD END FITTING | 1 | |
| J32065 | ALIGNMENT PIN MAIN LANDING GEAR TOW FITTING | 1 | |
| J32065-1 | ALIGNMENT PIN, MAIN LANDING GEAR TOW FITTING | 10 | |
| J32065-13 | ALIGNMENT PIN - MAIN LANDING GEAR TOW FITTING | 4 | |
| J32065-7 | ALIGNMENT PIN - MAIN LANDING GEAR TOW FITTING | 8 | |
| J32074-32 | CENTER BEAM FITTING ASSEMBLY | 1 | |
| J32087-15 | END FITTING, RH | 1 | |
| J32087-16 | END FITTING, LH | 1 | |
| J32090-10 | END FITTING ASSY | 1 | |
| J32090-12 | End Fitting Assy | 1 | |
| J32090-20 | END FITTING | 1 | |
| J32090-4 | END FITTING ASSY | 1 | |
| J32090-40 | END FITTING ASSY | 1 | |
| J32090-5 | END FITTING ASSY | 1 | |
| J32090-59 | END FITTING ASSY | 1 | |
| J32090-6 | End Fitting Assy | 1 | |
| J32090-7 | END FITTING ASSY | 1 | |
| J32090-71 | End Fitting Assy | 1 | |
| J32090-74 | End Fitting | 1 | |
| J32090-8 | END FITTING ASSY | 1 | |
| J47231 | CASTELLATED WRENCH FOR ADJUSTABLE END FITTING ON TELESCOPIC LOCKING STRUT (NLG) | 1 | |
| J47751 | END FITTING | 3 | |
| J52001-24 | END FITTING | 1 | |
| J52001-26 | END FITTING | 1 | |
| J52009-128 | End Fitting | 1 | |
| J52011-15 | END FITTING | 1 | |
| J52011-16 | END FITTING | 1 | |
| J52039-90 | PERSONNEL BARRIER EQUIPMENT- MAIN DECK CARGO DOOR FITTING ASSEMBLY | 8 | |
| J52039-91 | PERSONNEL BARRIER EQUIPMENT - MAIN DECK CARGO DOOR, FITTING ASSEMBLY | 4 | |
| J71003-152 | END FITTING | 1 | |
| J78004-75 | Sling Equipment - Hinge Fitting | 4 | |
| J78004-76 | Sling Equipment Hinge Fitting Prr | 3 | |
| J78004-90 | ATTACHMENT FITTING, SLING EQUIPMENT - GE90 FAN THRUST REVERSER HINGE, GE90 FAN T/R SLING (GE90-70/80/90 SERIES & -100 SERIES) 78004-90 REPLACES BOTH J78004-75 AND -76 FOR FUTURE PROCUREMENT. | 13 | |
| JLA321C | PUMP - VACUUM, PORTABLE, STANDARD DUTY STOP - TEST DOOR, PSU DOOR RETAINER - PSU OXYGEN ADAPTER FITTING, PRESSURE | 3 | |
| JMP/CF34/A/6569 | Tail mounted engines require an accessory delivery hose 1x20ft. Delivery hose complete with fittings | 1 | |
| JMP/CF34/D/6553/FITTINGS | (Port & Starboard) CF34-8C/E Engine Probe Fittings Only | 1 | |
| JMP/CF6/D/4037/FITTINGS | (Port & Starboard) CF6-80C2 Engine Probe Fittings Only | 1 | |
| JMP/CF6/D/4947/FITTINGS | (Port & Starboard) CF6-80E1 Engine Probe Fittings Only | 1 | |
| JMP/CFM56/D/4435/FITTINGS | (Port & Starboard) CFM56-2 & 5A Engine Probe Fittings Only | 1 | |
| JMP/CFM56/D/4462/FITTINGS | (Port & Starboard) CFM56-7 Engine Probe Fittings Only | 1 | |
| JMP/CFM56/D/4538/FITTINGS | (Port & Starboard) CFM56-3 Engine Probe Fittings Only | 1 | |
| JMP/CFM56/D/4605/FITTINGS | (Port & Starboard) CFM56-5B/C Engine Probe Fittings Only | 1 | |
| JMP/GE90-115B/D/4949/BRACKETS&FITTINGS | (Port & Starboard) GE90-115b Engine Probe Brackets/Fittings Only | 1 | |
| JMP/GE90/D/4081/BRACKETS&FITTINGS | (Port & Starboard) GE90 Engine Probe Brackets/Fittings Only | 1 | |
| JMP/GENX/D/6783/FITTINGS | (Port & Starboard) GEnx Engine Probe Fittings Only | 1 | |
| JMP/GP7200/D/7035/FITTINGS | (Port & Starboard) GP7200 Engine Probe Fittings Only | 1 | |
| JMP/TRENT/D/4702/FITTINGS | (Port & Starboard) Trent 772 Short Probe Fittings Only | 1 | |
| JMP/TRENT/D/6188/FITTINGS | (Port & Starboard) Trent 500 Short Probe Fittings Only | 1 | |
| JMP/V2500/D/4040/FITTINGS | (Port & Starboard) V2500 Engine Probe Fittings Only | 1 | |
| K07004-1 | JACK FITTING EQUIPMENT - INNER WING | 9 | |
| K07005-1 | JACK FITTING EQUIPMENT - OUTER WING | 10 | |
| K27044-7 | END FITTING ASSY | 1 | |
| K27044-8 | END FITTING ASSY | 1 | |
| K2717 | KIT: FITTING,OXYGEN | 6 | |
| K28003-1 | DEFUELING FITTING EQUIPMENT - MAIN AND OVERRIDE PUMP | 1 | |
| K32026 | ALIGNMENT PIN MLG TOW FITTING | 1 | |
| K51101-101 | A320 SKIN FITTING ALIGNMENT | 1 | |
| K52002-103 | End Fitting Assy | 1 | |
| K52010-8 | END FITTING | 1 | |
| K52010-9 | END FITTING | 1 | |
| K52039-1 | RIG PIN - PUSH-PULL CABLE AND FLOOR FITTING RIGGING, PASSENGER ENTRY DOOR | 5 | |
| K56004-1 | GAGE - GO/ NO-GO WIPER END FITTING | 1 | |
| KHC-2173 | QUICK-RELEASE FITTING FOR FILLING THE GENERATOR DRIVE WITH OIL | 10 | |
| KM57 | Rosan Fitting Replacement Kit | 1 | |
| KM57 KIT | ROSAN FITTING REPLACEMENT FOR INSTALLING O-RINGS AND REMOVING LOCKRINGS | 1 | |
| L50001T04 | LIGHTWEIGHT HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO PERMANENT) | 1 | |
| L50001T06 | LIGHTWEIGHT HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO PERMANENT) | 1 | |
| L50001T08 | LIGHTWEIGHT HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO PERMANENT) | 1 | |
| L5900 | Grease Fitting Assortments (Uses: Replacing damaged fittings, converting from plugs.) (Add to cart: Add To Cart) | 1 | |
| L5910 | Grease Fitting Assortments (Uses: Replacing damaged fittings, converting from plugs.) (Add to cart: Add To Cart) (Uses: For domestic & foreign cars & trucks.) (Add to cart: Add To Cart) | 1 | |
| L5950 | Grease Fitting Assortments (Uses: Replacing damaged fittings, converting from plugs.) (Add to cart: Add To Cart) (Uses: For domestic & foreign cars & trucks.) (Add to cart: Add To Cart) (Uses: Most popular sizes with refillable plastic box.) (Add to cart: | 1 | |
| LK2 | JUEGO DE BOQUILLAS ENGRASADORA, MODEL LK2 NEEDLE FITTING LUBRICATION KI | 7 | |
| LTCT25555-01 | Fitting Assembly, No. 4/5 Bearing Scavenge Temperature/Pressure | 1 | |
| LTCT7558-01 | Fitting Assembly, Oil Flow Equipment | 1 | |
| LTCT7558-02 | Fitting Assembly, Oil Flow Equipment | 1 | |
| LTCT7609-01 | Fitting Assembly, Scavenge | 1 | |
| M0DEL 111B | 0XYGEN ANALYZER, P0RTABLE, BATTERY 0PERATED, ACCEPTABLE F0R USE IN CLASS I, DIVISI0N II AREAS. INCLUDES H0SE/FITTING T0 MATE WITH B0EING AIRPLANE NITR0GEN GENERATI0N SYSTEM 0XYGEN TEST PORT | 1 | |
| M82000278 | SPECIAL END FITTING | 1 | |
| M82100020-010 | SPECIAL END FITTING | 1 | |
| M82100021-010 | SPECIAL END FITTING | 1 | |
| M82100021-020 | SPECIAL END FITTING | 1 | |
| M82100055-030 | SPECIAL END FITTING | 1 | |
| M82100055-030A | SPECIAL END FITTING | 1 | |
| MDL5845 | FITTING-GREASE GENERAL TYPE | 1 | |
| MIT140T0397 | ALIGNMENT PIN - BODY FUEL TANK SWING LINK FITTING | 1 | |
| MIT65C22125-10 | KIT TOOL – ATTACH FITTING BUSHING REPLACEMENT, HORIZONTAL STAB | 1 | |
| MIT65C22125-20 | KIT TOOL – ATTACH FITTING BUSHING REPLACEMENT, HORIZONTAL STAB. CENTER SECTION | 1 | |
| MODEL 111B | OXYGEN ANALYZER, PORTABLE, BATTERY OPERATED, ACCEPTABLE FOR USE IN CLASS I, DIVISION II AREAS. INCLUDES HOSE/FITTING TO MATE WITH BOEING AIRPLANE NITROGEN GENERATION SYSTEM OXYGEN TEST PORT. | 1 | |
| MS20667-12 | FORK END FITTING | 1 | |
| MS20668-12 | EYE END FITTING | 2 | |
| MT548-1 | ENGINE HOIST ADAPTER (INCLUDES FITTING, BOLT, WASHERS, AND NUTS) | 1 | |
| MTAX04D52880165 | FITTING REPLACEMENT TOOL | 1 | |
| N-2422–02 | QUICK-RELEASE FITTING FOR FILLING THE GENERATOR DRIVE WITH OIL | 1 | |
| N2 HOSE | 1/4 HOSE PIPE WITH 1/4 STRAIGHT FITTING LENGTH 10.5 MTR | 1 | |
| NAEF4 | CONNECTOR; PNEUMATIC; CONNECTION FOR HOSE FITTING IN THE AIR DISTRIBUTION BOX OF THE DOAR DATA TEST EQUIPMENT SET; ALUMINUM | CONNECTION | 1 | |
| NDT6036 | UPPER WING SKIN AT THE ATTACHMENT FOR THE FRONT SPAR PITCH-LOAD FITTINGS | 2 | |
| NDT6036P1 | UPPER WING SKIN AT THE ATTACHMENT FOR THE FRONT SPAR PITCH-LOAD FITTINGS | 2 | |
| NDT6036P2 | UPPER WING SKIN AT THE ATTACHMENT FOR THE FRONT SPAR PITCH-LOAD FITTINGS | 2 | |
| NDT6052 | BOEING REFERENCE STANDARD 767 P4, 57-50-27. UT INSPECTION OF MAIN LANDING GEAR FORWARD TRUNNION SUPPORT SIDE LOAD FITTING | 1 | |
| OHME65B89601-3 | FWD FITTING -0 WELDMENT | 1 | |
| OHME65B89603-1 | CENTER FITTING | 1 | |
| OHME65B89603-17 | CENTER FITTING | 1 | |
| OMP2506-3 | QUICK-RELEASE FITTING FOR FILLING THE GENERATOR DRIVE WITH OIL | 22 | |
| OU129054 | Centering Fitting Bush | 1 | |
| OXYGEN FITTING | OXYGEN END FITTING NOSE | 1 | |
| PC-1006 | OXYGEN FITTING | 19 | |
| PL48-4-50 | FRB EXTRACTION TOOL FITTED WITH END-FITTING | 1 | |
| PWA211308 | ENGINE ASSEMBLY- #10 FEMALE FITTINGS | 1 | |
| PWA212464 | ENGINE ASSY, ENGINE ASSY, 90 DEGREE #6 MALE FITTING | 1 | |
| PWA29371 | FITTING, LEAK CHECK-ENGINE BREATHER TO AIR SUPPLY | 1 | |
| PWC32113 | FITTING SCAVENGE | 1 | |
| PWC37827 | SOCKET,WRENCHING,TUBE FITTING | 7 | |
| PWC37827D | SOCKET,WRENCHING,TUBE FITTING | 2 | |
| PWC38147 | FITTING, DRAIN ENGINE OIL | 14 | |
| PWC38147B | FITTING, DRAIN ENGINE OIL | 2 | |
| PWC71959 | CENTER FLUSH FITTING | 3 | |
| Q21817 | WRENCH TO LOOSEN THE EYE FITTING | 1 | |
| Q46090 | TIGHTENING ADAPTER FOR END FITTING ASSEMBLY | 1 | |
| Q46250 | WRENCH FOR END FITTING | 1 | |
| Q47016 | PIN-TO ALIGN END FITTINGS | 3 | |
| Q47244 | WRENCH FOR ADJUSTABLE END FITTING LOCK NUT OF RETRACTION STRUT (MLG) | 1 | |
| R0506 | Ionic Systems Hose End Connectors 8001-3020 1/2 in Hose Fitting | 2 | |
| R50001T04 | HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO PERMANENT) | 1 | |
| R50001T10 | HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO PERMANENT) | 1 | |
| R50001T12 | HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO PERMANENT) | 1 | |
| R50001T16 | HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO PERMANENT) | 1 | |
| R50001T20 | HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO PERMANENT) | 1 | |
| R80101T04 | HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO PERMANENT)（REPAIR SYSTEM） | 8 | |
| R80101T05 | HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO PERMANENT)（REPAIR SYSTEM） | 4 | |
| R80101T16 | AEROQUIP RYNGLOK PERMANENT SWAGE FITTING 1.0" | 5 | |
| R80101T24 | AEROQUIP RYNGLOK PERMANENT SWAGE FITTING 1.5" | 3 | |
| RA0001D16 | LOW PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO PERMANENT) | 1 | |
| RA0001D20 | LOW PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO PERMANENT) | 1 | |
| RBE-06-6804 | END FITTING (STAUBLI) | 1 | |
| RBW6305G02831-3G | Tool Kit, Main Gear Box Upper Fitting Replacement | 2 | |
| RF08LPDE | ATTENUATOR ROSAN FITTING TOOL | 2 | |
| RF5006DW | FITTING INSTALLATION TOOL (WRENCH) | 2 | |
| RF5008DW | FITTING INSTALLATION (WRENCH) | 1 | |
| RF5012DW | FITTING INSTALLATION (WRENCH) | 1 | |
| RM-12-41-222 | END FITTING | 1 | |
| RM12-41-2-2-2G | END FITTING | 1 | |
| RRT028228 | LOCATION PIN - LINE UP BOLT HOLES IN FANCASE WHEN FITTING SURFACE OIL COOLERS | 2 | |
| S16-0645-0099 | CASTELLATED WRENCH END FITTING | 1 | |
| S47263 | END FITTING COMPRESSION TOOL | 1 | |
| SB53-6026 | TOOL-NLGUPPER ATTACHMENT FITTING | 1 | |
| SCOTT 5020-1 | GENERAL OXYGEN FITTING | 1 | |
| SK010-20971 | END FITTING | 1 | |
| SK010-20971 | END FITTINGS 3 ITEMS | 1 | |
| SK03-20971 | END FITTING | 1 | |
| SK04-2097 | END FITTING - UNLOCKING ACTR NLG A320NEO | 1 | |
| SK04-20971 | END FITTING | 1 | |
| SK04-20972 | END FITTING | 3 | |
| SK05-20971 | END FITTING | 1 | |
| SK05-20972 | END FITTING | 1 | |
| SK06-20971 | END FITTING | 1 | |
| SK06-20972 | END FITTING | 1 | |
| SK08-20971 | END FITTING | 1 | |
| SK08-20972 | END FITTING | 1 | |
| SK20978-1004 | END FITTING | 1 | |
| SL05-20785 | END FITTING | 1 | |
| SNI-325 | LP REGULATOR along with Endfittings compatible with regulators | 1 | |
| SO111-7 | Custom FOKKER F28 Horizontal Stab. Drive Junction Fitting Eddy Current Standard per drawing # 28. 0-3210/2610-Material: 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| SPL-1772 | FITTING EQUIPMENT - FUEL DRAIN SUMP | 1 | |
| SPL-1990 | EQUIPMENT - FITTING, FORWARD AND AFT LARGE CARGO DOOR | 1 | |
| ST2580-67 | SPANNER WRENCH LAV DRAIN FITTING | 3 | |
| ST869K-C-40F | PLUG, CLAMP, THREADED, FITTING END | 1 | |
| ST869K-C-40F-10 | PLUG, CLAMP, THREADED, FITTING END | 1 | |
| ST869K-C-56F | PLUG, CLAMP, THREADED, FITTING END | 1 | |
| ST869K-C-56F-12 | PLUG, CLAMP, THREADED, FITTING END | 1 | |
| ST869K-C-64F | PLUG, CLAMP, THREADED, FITTING END | 1 | |
| ST869K-C-64F-13 | PLUG, CLAMP, THREADED, FITTING END | 1 | |
| ST931E-500-1000 | SWAGING TOOL - THRUST LINK FITTING, FORWARD ENGINE MOUNT | 1 | |
| STD-6100 | FITTING - NYLON, 1" ID X 1 NPT WITH BARBED END FOR HOSE | 1 | |
| T-01182AS | Z- FITTING WRENCH | 1 | |
| T42315-72AT3 | HOIST CABLE REMOVAL/FITTING EQUIPMENT | 1 | |
| TB3114G001 | SEGMENT FITTING TOOL | 1 | |
| TEK-5086 | UPPER WING SKIN AT THE ATTACHMENT FOR THE FRONT SPAR PITCH-LOAD FITTINGS | 1 | |
| TF50B21513 | FLEXINOX CLAMP TIGHTENING END FITTING | 1 | |
| TM2012G001 | IMMOBILIZER END-FITTING | 2 | |
| TN326330 | PIN ALIGNMENT TOOL, HORIZONTAL STABILIZER FITTINGS | 1 | |
| TS.790.10.40 | PLUG FITTING OR EQUIVALENT | 1 | |
| TS.790.10.40 MK12 | PLUG FITTING OR EQUIVALENT COMMERCIALLY AVAILABLE FROM BOMBARDIER | 1 | |
| TS.790.10.40 MK16 | PLUG FITTING OR EQUIVALENT COMMERCIALLY AVAILABLE FROM | 1 | |
| TS.790.10.40 MK20 | PLUG FITTING OR EQUIVALENT COMMERCIALLY AVAILABLE FROM | 1 | |
| TS.790.10.50 MK12 | ADAPTER FITTING OR EQUIVALENT,,COMMERCIALLY AVAILABLE FROM | 1 | |
| TS.790.10.50 MK16 | ADAPTER FITTING OR EQUIVALENT,,COMMERCIALLY AVAILABLE FROM | 1 | |
| TS.790.10.50 MK20 | ADAPTER FITTING OR EQUIVALENT COMMERCIALLY AVAILABLE FROM | 1 | |
| XA-455S | UPPER WING SKIN AT THE ATTACHMENT FOR THE FRONT SPAR PITCH-LOAD FITTINGS | 1 | |
| XXX2 | PORTABLE NITROGEN BLOWING EQUIPMENT WITH TROLLEY ( MATCH BOC FOR FITTINGS) -BOC INTERNATIONAL NITROGEN REGULATOR -7.5KG -13KG OUTLET CONNECTION: AS 2473.2; TYPE 50 | 1 | |
| YA750 | NOZZLE, MLG LUBRICATING NEEDLE COUPLER, EXTENSION, MLG LUBRICATION COUPLER, NEEDLE NOZZLE, MLG LUBRICATION FITTING - LUBRICATION - AFT WHEEL WELL BULKHEAD SPHERICAL BEARING GUN - GREASE | 5 | |
| YA756 | NOZZLE, MLG LUBRICATING NEEDLE COUPLER, EXTENSION, MLG LUBRICATION COUPLER, NEEDLE NOZZLE, MLG LUBRICATION FITTING - LUBRICATION - AFT WHEEL WELL BULKHEAD SPHERICAL BEARING GUN - GREASE | 2 | |
| YA761 | NOZZLE, MLG LUBRICATING NEEDLE COUPLER, EXTENSION, MLG LUBRICATION COUPLER, NEEDLE NOZZLE, MLG LUBRICATION FITTING - LUBRICATION - AFT WHEEL WELL BULKHEAD SPHERICAL BEARING GUN - GREASE | 2 | |
| f 72714-54 | Beam Assy - Center Engine Fitting | 5 | |
| f72714-54 | Beam Assy - Center Engine Fitting | 5 | |
| 98A27604011000 | BULLET,USED AS A GUIDE WHEN FITTING THE | 2 | |
| PWA29371 | FITTING LEAK CHECK ENG, BREATHER | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
