| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| AERAZUR EFA TYPE 120 | ELEVATOR P | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| F72928-62 | Air Pressure Regulator Equip - Elevator Feel Comp | 8 | |
| F72928-63 | Air Pressure Regulator Equip - Elevator Feel Comp | 11 | |
| (CALIB) 98F27303000000 | ELEVATOR CHECK ELEVATOR-FREE PLAY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27309005000 | PIN SET-CENTERING, ELEVATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V20003000000 | ELEVATOR PLATFORM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V20003003000 | R/I ELEVATOR PLATFORM A350/A330 NEO (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A27125-17 | MEASURING TOOL, RUDDER AND ELEVATOR PCU (CALIBRATION) | 3 | |
| (CALIB) J27013-20 | SLING EQPT - R/I ELEVATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J27079-38 | INSPECTION EQUIPMENT, ELEVATOR FREEPLAY | 1 | |
| (CALIB) K27046-15 | LOCK EQPT - ELEVATOR PCU (CALIBRATION) (CALIBRATION) | 1 | |
| 0U190358 | PIN-RIGGING, ELEVATOR CONTROL | 4 | |
| 101-610000-1/807 | ELEVATOR TRAVEL BOARD (BEECHCRAFT CORP) | 1 | |
| 101-610000-7 | SKIN-UPPER-OUTBOARD- ELEVATOR | 1 | |
| 101-610015-11 | TIP- ELEVATOR ASSEMBLY | 1 | |
| 10550003 | EFCTB - ELEVATOR FEEL COMPUTER TEST BOX | 1 | |
| 114-380069-0003 | FLIGHT CONTROL RIG PIN (ELEVATOR, AILERON, AFT RUDDER) | 1 | |
| 1159GSE50107-3 | CHECKOUT ELEVATOR ACTUATOR HARD OVER PROTECTION TOOL | 1 | |
| 1159GSE50255-13 | ELEVATOR HOPS SWITCH GAP CHECK TOOL | 1 | |
| 1159GSE50255-15 | ELEVATOR HOPS SWITCH GAP CHECK TOOL | 1 | |
| 12045-019-001 | ELEVATOR SPRING CARTRIDGE MOUNTING SPACER | 1 | |
| 12345-042-001 | ELEVATOR FREE PLAY FORCE UNIT | 1 | |
| 14OHME65B00184 | OVERHEAD EQUIPMENT - INBOARD AND OUTBOARD ELEVATOR SLING | 1 | |
| 15C2390600TF2-101 | ELEVATOR PCU RETRACT TOOL | 1 | |
| 15C2390600TF2-103 | ELEVATOR PCU EXTEND TOOL | 1 | |
| 17G110637-1 | ADAPTER SET, HOISTING - ELEVATOR/AILERON/SLAT | 1 | |
| 19G-000-212-27-30-0486 | PITCH TRIM ACTUATOR FREE PLAY SERVICING TOOL (ELEVATOR SIDE) | 1 | |
| 20875A42 | RIGGING BAR EQUIPMENT - ELEVATOR TAB C27028-1 | 1 | |
| 2431A2000-01W01 | KEY FOR PORTS OF HYDRAULIC DRIVES OF AILERONS, ELEVATORS AND RUDDER | 1 | |
| 2471002-010 | ELEVATOR COUTOUR PLATE | 3 | |
| 25-8Y11 | ELEVATOR RIGGING PLATE | 1 | |
| 25Y195A | ELEVATOR RIGGING PLATE | 4 | |
| 25Y73A | ELEVATOR RIGGING PLATE | 6 | |
| 27-1-3804 | PLATE, ELEVATOR TRIM-TAB CHECK | 1 | |
| 273000-001 | RIGGING PIN, ELEVATOR | 1 | |
| 273000-003 | RIGGING PIN, ELEVATOR | 1 | |
| 27600-3 | PCU-ELEVATOR | 1 | |
| 28-0-4102 | F100 RIGGING PIN ELEVATOR | 2 | |
| 282700TF1-1001 | Test Fixture Assembly, Elevator PCA | 1 | |
| 282700TF1-1003 | Test Fixture Assembly, Elevator PCA | 1 | |
| 2CF65B05528-1 | BALANCE STAND - OUTBOARD AILERON, UPPER RUDDER AND OUTBOARD ELEVATOR | 8 | |
| 2MIT65B80307 | ADAPTER - PROTRACTOR CRANK ASSEMBLY, ELEVATOR TORQUE TUBE | 1 | |
| 2OHME65B80550 | REM/INSTL ADAPTER-INBD ELEVATOR ACTUATOR | 5 | |
| 2PME65B80550 | REM/INSTL ADAPTER-INBD ELEVATOR ACTUATOR | 7 | |
| 2TE65B00184 | TEST EQUIPMENT - ACTUATOR, INBOARD ELEVATOR | 4 | |
| 314STD-27-0011 REV. 2 | INSPECTION AND/OR ADJUSTMENT OF THE ELEVATOR CONTROL SYSTEM BACKLASH | 1 | |
| 3170037-2 | ELEVATOR DOWN SPRING RIG PIN | 1 | |
| 3321530-11 | ELEVATOR PCU | 1 | |
| 3402780-5 | ELEVATOR RIG PIN | 1 | |
| 35-92178-0001 | PROTRACTOR, LH ELEVATOR TAB | 1 | |
| 35-92178-0001 | LH ELEVATOR TAB PROTRACTOR - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | |
| 35-92178-0002 | RH ELEVATOR TAB PROTRACTOR - SUPPORT EQUIPMENT AND | 1 | |
| 35-92178-0002?? | RH ELEVATOR TAB PROTRACTOR - SUPPORT EQUIPMENT AND | 1 | |
| 35-92178-0002 | RH ELEVATOR TAB PROTRACTOR - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | |
| 35-93379-0001 | BALANCE EQUIPMENT FOR AILERON ELEVATOR AND RUDDER | 1 | |
| 357191-20 | WEIGHT ASSY, ELEVATOR TIP L/H | 1 | |
| 357191-25 | WEIGHT ASSY, ELEVATOR TIP R/H | 1 | |
| 376060GSE1-1001 | TEST CABLE − ELEVATOR PCU VALVE LEAK CHECK (20 FT (6.10 M) LONG) | 1 | |
| 390600-1009 | UNIT, POWER CONTROL ELEVATOR | 1 | |
| 390600TF1-1001 | TEST FIXTURE, ELEVATOR PCU | 1 | |
| 390600TF1-1001 | Test Fixture, Elevator PCU | 1 | |
| 390600TF2-101 | TOOL-ELEVATOR PCU INPUT JAMING (RETRACT) | 2 | |
| 390600TF2-103 | TOOL-ELEVATOR PCU INPUT JAMING (EXTEND) | 2 | |
| 390600TF50-1001 | TEST BOX, ELEVATOR PCU | 1 | |
| 390600TF50-1001 | Test Box, Elevator PCU | 1 | |
| 3ME65B05730-1 | ELEVATOR LOCK ASSEMBLY - OUTBOARD, LEFT HAND (P/N 3ME65B05730 - 1) | 7 | |
| 3ME65B05730-2 | ELEVATOR LOCK ASSEMBLY - OUTBOARD, RIGHT HAND (P/N 3ME65B05730 - 2) | 7 | |
| 3ME65B81000-1 | RUDDER / ELEVATOR CLAMP ASSEMBLY - B747 | 9 | |
| 3SF3621-22-15I | ELEVATOR POSITION TRANSMITTER | 1 | |
| 7467 | TON ELEVATOR, TYPE 60 | 1 | |
| 402638 | TEMPLATE ELEVATOR RIGGING | 1 | |
| 404209-1 | TEMPLATE ASSY, CONTOUR, ELEVATOR TRAVEL | 1 | |
| 414700GSE1 | LOCK COLLAR, PCU ELEVATOR | 1 | |
| 4156000GSE-1001 | ASSEMBLY, GROUND SUPPORT UNIT, ELEVATOR | 1 | |
| 415600GSE-1001 | LOCK COLLAR, PCU ELEVATOR | 7 | |
| 415600GSE1001 | ASSY, GROUND SUPPORT UNIT, ELEVATOR | 7 | |
| 420622 | ELEVATOR CABLE SPACER | 1 | |
| 4514080002-007 | FLIGHT CONTROL RIG PIN - ELEVATOR & RUDDER | 2 | |
| 4514080002-009 | FLIGHT CONTROL RIG PIN - ELEVATOR AFT | 2 | |
| 484100GSE-1001 | LOCKING COLLAR-ELEVATOR PCU | 1 | |
| 53 34 10 016 | Pitot probe cover, elevator (2 pcs) | 1 | |
| 5807005 | TEMPLATE ELEVATOR | 1 | |
| 5807008-000 | TEMPLATE ELEVATOR | 1 | |
| 5965694-1 | CONTROL COLUMN PUSH/PULL BAR, ELEVATOR & TAB | 3 | |
| 5ME65-73788 | Fittings To Support Rudder And Elevator During Weigh & Balance | 1 | |
| 5ME65-73788-2 | Support - Elevator Hinge | 1 | |
| 5ME65-73788-3 | Support - Elevator Hinge | 1 | |
| 6P1005521000CKF | ELEVATOR RIGGING ZERO POSITION KIT - OPTIONAL | 2 | |
| 807 101-610000-1 | ELEVATOR TRAVEL BOARD (BEECHCRAFT CORP) | 1 | |
| 85517021-001-138 | TOOL-LEFT ELEVATOR RIGGING (DRAWING AND MYLAR TEMPLATE) | 4 | |
| 85517021-002-138 | TOOL-RIGHT ELEVATOR RIGGING (DRAWING AND MYLAR TEMPLATE) | 4 | |
| 95-92054-0003 | LH ELEVATOR TAB PROTRACTOR - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | |
| 95-92071-0001 | LH ELEVATOR ZERO SETTING GAUGE - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | |
| 95-92071-0002 | RH ELEVATOR ZERO SETTING GAUGE - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | |
| 95-93032-0001 | RIGGING FEELER GAGES, RUDDER, ELEVATOR AND ROLL CONTROL - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | |
| 95-93032-0005 | RIGGING FEELER GAGES, RUDDER, ELEVATOR AND ROLL CONTROL - SUPPORT EQUIPMENT AND TOOLS DATA 95-93032-0001 | 1 | |
| 97A27003000007 | ELEVATOR PUSH/PULL GAUGE | 21 | |
| 98A27303002000 | CENTERING BULLETS AND PINS - ELEVATOR HINGE PINS | 8 | |
| 98A27307541000 | PIN ELEVATOR RIG | 10 | |
| 98A27307549000 | PIN, RIGGING, ELEVATOR CONTROL BELLCRANKS | 11 | |
| 98A27309010000 | PIN, RIGGING, ELEVATOR CONTROL BELLCRANKS | 2 | |
| 98A27408018000 | ELEVATOR HINGE BOLTS REPLACEMENT | 5 | |
| 98A27508015000 | PIN-RIGGING, ARTIFICIAL FEEL UNIT, ELEVATOR MECHANICAL CONTROLS | 7 | |
| 98A27508050000 | RIGGING PIN - ELEVATOR CONTROL | 7 | |
| 98A27508060000 | PIN - RIGGING, ELEVATOR CONTROL | 2 | |
| 98A27901001000 | PIN-RIGGING,ELEVATOR CONTROL | 9 | |
| 98A27901006000 | RIGGING PIN - ELEVATOR CONTROL | 11 | |
| 98A27901007000 | PIN-RIGGING,ELEVATOR CONTROL | 7 | |
| 98A5710 3013 000 | ELEVATOR TAB TEST PIN | 20 | |
| 98A57103013000 | ELEVATOR TAB TEST PIN | 20 | |
| 98D27208657000 | ELEVATOR/AILERON LOAD APPLICATION TOOL | 21 | |
| 98D27303000 | LOAD APPLICATION TOOL ELEVATOR RUDDER | 1 | |
| 98D27303000000 | LOAD APPLICATION TOOL ELEVATOR AILERON RUDDER | 1 | |
| 98D273030000001 | ELEVATOR PLAY CHECK | 1 | |
| 98D27303000001 | LOAD,APPLICATION TOOL-ELEVATOR, AILERON, RUDDER | 31 | |
| 98D27303000001 | LOAD APPLICATION TOOL - ELEVATOR, AILERON, RUDDER | 31 | |
| 98D27303000100 | LOAD,APPLICATION TOOL-ELEVATOR,AILERON,RUDDER | 1 | |
| 98D27303000102 | LOAD,APPLICATION TOOL-ELEVATOR,AILERON,RUDDER | 2 | |
| 98D27303000200 | LOAD,APPLICATION TOOL-ELEVATOR,AILERON,RUDDER | 1 | |
| 98D27303000201 | LOAD,APPLICATION TOOL-ELEVATOR,AILERON,RUDDER | 3 | |
| 98D27303000215 | LOAD,APPLICATION TOOL-ELEVATOR,AILERON,RUDDER | 1 | |
| 98D27303003001 | LOAD APPLICATION TOOL ELEVATOR AILERON RUDDER 01U | 24 | |
| 98D27303022000 | ELEVATOR/AIL/RUDDER FREE PLAY TOOL | 19 | |
| 98D27309001000 | CLAMP-ELEVATOR NEUTRAL SETTING | 26 | |
| 98D27309003000 | LOCK NEUTRAL POSITION ELEVATOR | 26 | |
| 98D27309004 | ELEVATOR CENTRALIZING PIN | 1 | |
| 98D27309004000 | PIN CENTERING. ELEVATOR INSTALLATION | 23 | |
| 98D27309004000 | PIN ELEVATOR CENTERING | 23 | |
| 98D55109003000 | CHECK FREE PLAY OF THE ELEVATOR BEARINGS | 4 | |
| 98D55109010000 | WRENCH-GROOVE NUT,ELEVATOR SUPPORT STRUT | 14 | |
| 98F27202502000 | PIN PIN, LOCATING -0 ELEVATOR, SERVO | 1 | |
| 98F27203502000 | PIN,LOCATING-ELEVATOR,SERVO CONTROL | 12 | |
| 98F27303000000 | CHECK ELEVATOR-FREE PLAY | 4 | |
| 98F27303001000 | ELEVATOR FREE PLAY | 1 | |
| 98F2730900400 | PIN - CENTERING - ELEVATOR INSTALLATION | 1 | |
| 98F27309004000 | PIN - CENTERING - ELEVATOR INSTALLATION | 14 | |
| 98F27309004100 | PIN CENTERING ELEVATOR | 2 | |
| 98F27309004102 | PIN CENTERING ELEVATOR | 1 | |
| 98F27309008000 | GAGE-ELEVATOR NEUTRAL POSITION | 1 | |
| 98L27309003000 | TOOL, OPTICAL - INNER ELEVATOR | 1 | |
| 98L27309004000 | OPTICAL TOOL - OUTER ELEVATOR | 1 | |
| 98L27309005000 | PIN SET-CENTERING, ELEVATOR | 1 | |
| 98L27309008000 | ADAPTER KIT, INNER ELEVATOR SER | 4 | |
| 98S27008009000 | ELEVATOR - TAB ZERO DEGRE POSITION JIG | 1 | |
| 98S27008009002 | ELEVATOR - TAB ZERO DEGRE POSITION JIG | 1 | |
| 98S27008009006 | ELEVATOR TAB 0° POSITION JIG | 11 | |
| 98S27008009007 | JIG CHECKING ELEVATOR /TAB POS RH | 11 | |
| 98V20003000000 | ELEVATOR PLATFORM | 2 | |
| 98V20003003000 | ELEVATOR PLATFORM | 2 | |
| 98V27008001000 | FREE PLAY TOOL ELEVATOR - AILERON - RUDDER | 2 | |
| 98V27301000000 | Elevator neutral position calibration tool | 5 | |
| 98V27309001000 | Elevator actuator retaining clip | 4 | |
| 98V27309002000 | SET, ELEVATOR PIN CENTERING | 5 | |
| 98V27309005000 | Cone setelevator actuator pin | 10 | |
| 98V27309007000 | OPTIC NEUTRL SET ELEVATOR | 4 | |
| 98V55209001000 | Elevator spreader | 5 | |
| A20004-72 | INSPECTION EQUIPMENT, ELEVATOR FREEPLAY | 3 | |
| A20004-78 | INSPECTION EQUIPMENT, ELEVATOR FREEPLAY | 23 | |
| A27001 | GAGEES INBD AILERON, RUDDER, OUTBD, AILERON, ELEVATOR PCAS | 1 | |
| A27001-1 | PCA GAGES - INBD/OUTBD AILERON, RUDDER, ELEVATOR | 9 | |
| A27001-2 | PCA GAGES - INBD/OUTBD AILERON, RUDDER, ELEVATOR | 3 | |
| A27001-3 | PCA GAGES - INBD/OUTBD AILERON, RUDDER, ELEVATOR | 7 | |
| A27001-4 | PCA GAGES - INBD/OUTBD AILERON, RUDDER, ELEVATOR | 7 | |
| A27003-23 | INSPECTION EQUIPMENT, ELEVATOR FREEPLAY | 17 | |
| A27008 | LIMITER EQPT ELEVATOR MOTION | 1 | |
| A27012 | SLING EQUIPMENT INBD OUTBD ELEVATOR SEGMENTS | 1 | |
| A27012-30 | SLING EQUIPMENT - INBOARD/OUTBOARD ELEVATOR SEGMENT | 11 | |
| A27025-1 | RIGGING EQUIPMENT - FORCE TRANSDUCER, ELEVATOR CONTROL | 1 | |
| A27035-1 | Screwdriver - Adapter Rudder/Elevator Feel Actuator Cylinder | 3 | |
| A27041-161 | Test Eqpt-Elevator Feel And Centering Unit | 1 | |
| A27041-175 | Test Equipment - Elevator Feel and Centering Unit | 2 | |
| A27041-176 | TEST EQUIPMENT - ELEVATOR FEEL AND CENTERING UNIT | 1 | |
| A27041-177 | TEST EQUIPMENT - ELEVATOR FEEL AND CENTERING UNIT | 1 | |
| A27041-188 | Test Equipment - Elevator Feel and Centering Unit | 1 | |
| A27058-60 | JIG EQUIPMENT - ELEVATOR FEEL AND CENTERING UNIT | 1 | |
| A27058-61 | Jig Eqpt-Elevator Feel And Centering Unit | 1 | |
| A27063-18 | ADAPTER CABLE - AILERON/ ELEVATOR/ RUDDER / COLUMN & WHEEL | 4 | |
| A27063-19 | BREAKOUT BOX EQUT CABLE ASSY AILERON LH/RH // RUDDER POS // CONTROL WHEEL POS // CONTROL COLUMN POS // RUDDER PEDAL POS // ELEVATOR POS | 5 | |
| A27063-26 | ADAPTER CABLE - THRUST REVERSER/ ELEVATOR/ RUDDER | 2 | |
| A27063-27 | ADAPTER CABLE - THRUST REVERSER/ ELEVATOR/ RUDDER | 3 | |
| A27063-28 | ADAPTER CABLE - ELEVATOR/ FLAP PDU/ SLAT CDU | 2 | |
| A27079-31 | INSPECTION EQ. ELEVATOR FREEPLAY | 1 | |
| A27079-32 | INSPECTION EQ. ELEVATOR FREEPLAY | 1 | |
| A27082-1 | DRILL JIG EQUIPMENT ELEVATOR TORQUE TUBE | 1 | |
| A27086-10 | SUPPORT FIXTURE - ELEVATOR SLAVE LINKAGE | 1 | |
| A27104 | LOCK EQPT ELEVATOR | 1 | |
| A27104-1 | ELEVATOR EQUIPMENT LOCK | 1 | |
| A27111 | LOCK EQPT-ELEVATOR ACTUATOR | 1 | |
| A27111-1 | LOCK EQUIPMENT – ELEVATOR ACTUATOR | 3 | |
| A27111-11 | LOCK EQUIPMENT - ELEVATOR ACTUATOR | 15 | |
| A27113 | CHECK EQPT -0 BREAKOUT TORQUE, ELEVATOR CONTROL | 1 | |
| A27113-1 | CHECK EQUIPMENT - BREAKOUT TORQUE, ELEVATOR CONTROLS OVERRIDE | 1 | |
| A27124-1 | MEASUREMENT TOOL - RUDDER & ELEVATOR POWER CONTROL ACTUATOR FORCE EQUIPMENT - RUDDER FREEPLAY CHECK | 6 | |
| A27124-36 | MEASUREMENT TOOL - RUDDER & ELEVATOR POWER CONTROL ACTUATOR FORCE EQUIPMENT - RUDDER FREEPLAY CHECK | 11 | |
| A27125 | MEASUREMENT TOOL-RUDDER&ELEVATOR POWER CONTROL ACTUATOR | 1 | |
| A27125-17 | MEASUREMENT TOOL - RUDDER AND ELEVATOR POWER CONTROL ACTUATOR | 8 | |
| A27126-1 | HOLDING FIXTURE - INPUT ROD ASSEMBLY, ELEVATOR POWER CONTROL UNIT (PCU) | 3 | |
| A27127-1 | Changing Fixture - Input Rod Assy, Elevator PCU | 3 | |
| A27127-29 | CHECKING FIXTURE - INPUT ROD ASSEMBLY, ELEVATOR PCU | 8 | |
| A27307549 | PIN RIGGING BELL CRANKS ELEVATOR CONTROL | 1 | |
| A330-92024-0005 | BOOM STAND ELEVATOR PLATFORM | 1 | |
| A55003 | ALIGNMENT EQPT HINGE INBOARD ELEVATOR | 1 | |
| A55003-1 | ALIGNMENT EQUIPMENT - HINGE, INBOARD ELEVATOR | 1 | |
| AB27001-VU4 | PIN CENTERING, ELEVATOR INSTALLATION | 1 | |
| AB55001-T6V | WRENCH-GROOVE NUT, ELEVATOR SUPPORT STRUT | 1 | |
| ACS76050 | RIGGING PINS ELEVATOR | 2 | |
| AERAZUR | EFA TYPE 120 ELEVATOR P | 1 | |
| AERAZUR EFA TYPE 120 | EFA TYPE 120 ELEVATOR P | 1 | |
| AGE-00076-003 | CLAMP-LOCK,ELEVATOR | 3 | |
| AGE-00248-409 | PIN ELEVATOR SURFACE (KIT BACKLASH) | 2 | |
| AGE-00248-423 | PIN ASSY (QUADRANT REAR ELEVATOR | 1 | |
| AGE-00704-401 | CLAMP-LOCKING, ELEVATOR | 7 | |
| AGE-00707-401 | CLAMP-LOCKING, ELEVATOR | 4 | |
| AGE-01620-405 | PIN-RIGGING BELLCRANK ELEVATOR TORQUE TUBE | 1 | |
| AGE-01628-401 | PIN-RIGGING ELEVATOR TORQUE TUBE | 1 | |
| AGE-04265-403 | PIN-RIGGING BELLCRANK ELEVATOR TORQUE TUBE | 10 | |
| AGE13316 | CLAMP-LOCKING, ELEVATOR | 3 | |
| AGSCRJ100/200 | AILERON/ELEVATOR PCU HEALTH CHECKS | 1 | |
| AGSCRJ700 | Kit − Aileron/Elevator PCU Health Checks | 1 | |
| AGSCRJ700 | KIT - AILERON/ELEVATOR PCU HEALTH CHECKS | 1 | |
| AGSCRJ700 / 200 | KIT - AILERON/ELEVATOR PCU HEALTH CHECKS | 4 | |
| AGSCRJ700-200 | ELEVATOR - AILERON PCU HEALTH CHECK KIT | 4 | |
| AGSCRJ700/200 | Kit − Aileron/Elevator PCU Health Checks | 4 | |
| AGSCRJ700700/200 | KIT AILERON/ELEVATOR PCU HEALTH CHECKS | 1 | |
| AJE27344890000 | GAUGE FREE-PLAY, ELEVATOR & HORIZONTAL TAILPLANE | 1 | |
| APX-1-30P4500500-501 | TEMPLATE FOR ELEVATOR RANGE LH | 1 | |
| APX-1-30P4500500-502 | TEMPLATE FOR ELEVATOR RANGE RH | 1 | |
| AT-71603 | Installing Fixture, Elevator Compensator Seat | 1 | |
| B157 | FIXTURE,ELEVATOR POSITIONING | 1 | |
| B27009 | LOCK -0 OUT EQUIPMENT-PCU, ELEVATOR | 1 | |
| B27009-1 | ELEVATOR PCU LOCK KIT - B757 | 1 | |
| B27009-12 | LOCK-OUT EQUIPMENT - POWER CONTROL ACTUATOR, ELEVATOR | 21 | |
| B27009-2 | ELEVATOR PCA LOCK TOOL | 8 | |
| B27009-3 | CONTROL LOCK ASSEMBLY ELEVATOR ACCIDENTAL OPERATION | 9 | |
| B27021-6 | CLAMP ASSEMBLY FOR B27021-1 ELEVATOR REM/INST SLING | 1 | |
| B27023 | RIGGING BLOCK EQPT -0 ELEVATOR AFT QUADRANT | 1 | |
| B27023-47 | RIGGING BLOCK EQUIPMENT - ELEVATOR AFT QUADRANT | 7 | |
| B27031 | CHECKING FIXTURE -0 POGO ROD ASSY, ELEVATOR | 1 | |
| B27031-16 | CHECKING FIXTURE - ELEVATOR POGO ROD ASSEMBLY | 3 | |
| B27032 | COMPRESSOR -0 POGO ROD, ELEVATOR PCU | 1 | |
| B27032-10 | POGO ROD ELEVATOR PCU | 1 | |
| B27032-9 | COMPRESSOR - ELEVATOR PCU POGO ROD | 15 | |
| B27039-1 | RIGGING EQUIPMENT ELEVATOR AND STABILISER TRIM SYSTEMS | 1 | |
| B27039-13 | TRIM AND CALIBRATE EQUIPMENT FOR ELEVATOR AND STABILIZER | 4 | |
| B27039-28 | RIGGING EQUIPMENT - ELEVATOR AND STABILIZER TRIM SYSTEMS CONTROL INSTALLATION | 9 | |
| B27043 | JIG EQUIPMENT -0 ELEVATOR FEEL & CENTERING UNIT | 1 | |
| B27043-1 | JIG EQUIPMENT - ELEVATOR FEEL AND CENTERING UNIT | 1 | |
| B27046-6 | Compressor, Elevator Pogo | 5 | |
| B27060 | SPRING REMOVAL/INSTL SET-DECENTERING,ELEVATOR CONTROLS | 1 | |
| B27060-1 | SPRING REMOVAL/INSTL SET - DECENTERING, ELEVATOR CONTROLS | 9 | |
| B27061 | TEST BOX -0 RUDDER / ELEVATOR PCU MONITOR SYSTEM | 1 | |
| B27061-1 | TEST BOX - RUDDER/ELEVATOR PCU MONITOR SYSTEM | 8 | |
| B27061-2 | ELEVATOR AND RUDDER PCU MONITORING SYSTEM | 1 | |
| B27062 | FIXTURE -0 TEST, SHEAR LEVER, ELEVATOR PCU | 1 | |
| B27062-1 | TEST FIXTURE - SHEAR LEVER, ELEVATOR PCU | 1 | |
| B27068 | TEST EQPT -0 ELEVATOR CONTROL, NEUTRAL SHIFT | 1 | |
| B27068-1 | TEST EQUIPMENT - ELEVATOR CONTROL NEUTRAL SHIFT SPRING | 1 | |
| B52026 | SERVICE PLATFORMS -0 ELEVATOR/SERVICE ACCESS | 1 | |
| B52026-1 | SERVICE PLATFORMS - ELEVATOR/SERVICE ACCESS DOOR | 3 | |
| B52026-2 | SERVICE PLATFORMS - ELEVATOR/SERVICE ACCESS DOOR | 2 | |
| B60465-2 | ELEVATOR FREE PLAY PCA TOOL | 1 | |
| B757 TREATS | RUDDER/ELEVATOR PCU TEST BOX | 1 | |
| C0049 | Checkplate LH Elevator Trimtab | 1 | |
| C27005-1 | Assembly equipment-elevator feel & centering unit | 1 | |
| C27005-19 | Assembly equipment-elevator feel & centering unit | 3 | |
| C27028-21 | Rigging Bar -Elevator Tab (C27083 Replaces C27028) | 16 | |
| C27028-22 | Elevator Tab Ski Jump | 1 | |
| C27028-43 | RIGGING BAR EQPT ELEVATOR TAB | 1 | |
| C27032 | MEASUREMENT EQPT-STABILIZER/ELEVATOR(SKI JUMP) | 1 | |
| C27032-1 | Measurement Eqpt-Stabilizer And Elevator | 11 | |
| C27034 | SLING EQPT. ELEVATOR REMOVALjINSTALLATION | 1 | |
| C27034-1 | SLING EQPT - ELEVATOR | 19 | |
| C27034-3 | SLING EQPT. - ELEVATOR RMVL. / INSTL | 1 | |
| C27034-31 | Sling Equipment - Elevator Removal/Installation (CE) | 7 | |
| C27034-43 | Sling Equipment - Elevator Removal/Installation | 4 | |
| C27034-44 | Sling Equipment - Elevator Removal/Installation | 4 | |
| C27034-53 | SLING EQPT - ELEVATOR R/I | 2 | |
| C27036-1 | Support Set - Forward Elevator Control Quadrant | 8 | |
| C27044-15 | Rigging Beam - Elevator Index Plate Installation | 7 | |
| C27063-1 | Support Clamp -Forward Elevator Control Quadrant | 2 | |
| C27066 | LOCK EQPT AILERONjELEVATOR PCU INPUT ROD (POGO) | 1 | |
| C27066-1 | Lock Equipment - Aileron/Elevator PCU Input Rod (POGO) | 25 | |
| C27066-1 | LOCK EQUIPMENT AILERON/ELEVATOR PCU | 25 | |
| C27073-1 | Test Equipment - Quadrant Assembly, Elevator Controls | 1 | |
| C27082 | PUSROD ADJUSTMENT ELEVATOR TAB & AILERON | 1 | |
| C27082-1 | Fixture Equipment - Pushrod Length Adjustment, Elevator Tab and Aileron | 9 | |
| C27083-8 | ELEVATOR STOP | 1 | |
| C27085 | REMjINSTL EQPT. TAB MECHANISM ASSY ELEVATOR CONTROL | 1 | |
| C27085-1 | Removal/Installation Equipment - Tab Mechanism Assembly, Elevator Control | 18 | |
| C27086-1 | Spring Removal/Installation Equipment - Elevator Tab Mechanism Assembly | 13 | |
| C27086-2 | ELEVATOR TAB MECHANISM ASSY SPRING | 1 | |
| C27086-27 | SPRING REMOVAL/INSTALLATION - ELEVATOR TAB MECHANISM ASSEMBLY | 8 | |
| C27086-3 | ELEVATOR TAB MECHANISM ASSY SPRING | 1 | |
| C27092 | RIGGING BEAM - ELEVATOR INDEX PLATE INSTALLATION | 1 | |
| C27092 | Rigging Beam - Elevator Index Plate Installation | 1 | |
| C27092-1 | RIGGING BEAM - ELEVATOR INDEX PLATE INSTALLATION | 6 | |
| C55001-1 | ELEVATOR SLING-W/GraphiteElvtr | 15 | |
| C55001-7 | Adapter-Elevator Hinge Ftg | 1 | |
| CA13802-001 | ELEVATOR PCU RETURN RELIEF TEST BUTTON TOOL | 3 | |
| CA21038K-100 | CHECKING FIXTURE - ELEVATOR POGO ROD ASSEMBLY | 1 | |
| CF65B05700-2 | PIN - HINGE ALIGNMENT, ELEVATORS | 1 | |
| CF65B18303 | BALANCE STAND - UPPER RUDDER, OUTBOARD AILERON AND OUTBOARD ELEVATOR | 1 | |
| CG2042000-001 | ELEVATOR PRIMARY ACTUATION LOCK OUT TOOLS | 1 | |
| CG9000099-0001 | Elevator Pointer Kit | 1 | |
| CJMD527-102 | ELEVATOR AND ELEVATOR TRIM TAB CHECK FIXTURE (SPECIAL ORDER NOT STOCKED) | 1 | |
| CJMD827-002 | AILERON ELEVATOR AND RUDDER TRIM FREE PLAY CHECK FIXTURE FAB | 2 | |
| CLRE-02-35-32000-0005 | PROTRACTOR, LH ELEVATOR TAB | 1 | |
| CLRE-02-35-32001-0005 | PROTRACTOR, RH ELEVATOR TAB | 1 | |
| CLRE02-35-32000-0005 | PROTACTOR, LH ELEVATOR TAB | 1 | |
| CLRE02-35-32001-0005 | PROTACTOR, RH ELEVATOR TAB | 1 | |
| COM-9674 | ELEVATOR PITOT STATIC PROBE COVER | 1 | |
| CS-235-RC106 | LH ELEVATOR TAB PROTRACTOR - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | |
| CS-235-RC116 | BALANCE EQUIPMENT FOR AILERON ELEVATOR AND RUDDER | 1 | |
| CS-295-RC163 | LH ELEVATOR ZERO SETTING GAUGE - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | |
| CTS 401R47A | CLAMP - ELEVATOR/SERVO TAB | 3 | |
| CTS401R47A | Clamp - elevator servo tab rigging | 3 | |
| CTS5401R-47A | ELEVATOR CLAMP | 1 | |
| DEN-310 | HORIZONTAL STABILIZER COVERS, WINTER USE, HAIL PROTECTION OVER ELEVATORS ONLY (set of 2) | 1 | |
| DEN-315 | HORIZONTAL STABILIZER COVERS, ALL YEAR USE, HAIL PROTECTION OVER ELEVATORS ONLY (set of 2) | 1 | |
| DMAK-C295CN235 | RH ELEVATOR TAB PROTRACTOR - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | |
| DSA256 | DIAMOND ELEVATOR PLATE | 1 | |
| DZZ7112-1 | Support inoc elevator | 1 | |
| DZZ7113-1 | Support-outboard elevator | 1 | |
| DZZ7146-1 | OUTBD ELEVATOR DAMPER T/Q ADAPTER | 1 | |
| DZZ7179-153 | Elevator Support Fixture | 1 | |
| DZZ7179-155 | Elevator Pedestal Assembly | 1 | |
| DZZ7295-1 | ELEVATOR ACT SUPPORT BOLT GUIDE | 2 | |
| DZZ7295-501 | ELEVATOR ACT SUPPORT BOLT GUIDE | 1 | |
| DZZ7316-1 | HOISTING ADAPTER SET, ELEVATOR | 1 | |
| DZZ7319-1 | Brace assy detachable elevator support equipment dwg | 1 | |
| EFCTB | ELEVATOR FEEL COMPUTER TEST BOX | 1 | |
| EFCTB-000 | EFCTB - ELEVATOR FEEL COMPUTER TEST BOX | 1 | |
| ELEV-PCA-BOLT-TOOL | ELEVATOR PCA BOLT TOOL | 1 | |
| EMB-00033-005 | Elevator Neutral Position Locking Device | 2 | |
| EMB-00053-001 | WRENCH - RECONNECT, AILERON/ELEVATOR CONTROLS P/N EMB-00053-001 | 12 | |
| EMB-01163-003 | LOCK COLLAR, PCU ELEVATOR | 10 | |
| F70330-110 | PIN ELEVATOR | 1 | |
| F70330-128 | Pin-elevator tab | 1 | |
| F70330-14 | SUPPORT ELEVATOR HINGE | 2 | |
| F70330-164 | Pin-elevator | 1 | |
| F70330-21 | ELEVATOR TAB ASSEMBLY SUPPORT TOOL | 5 | |
| F71433 | ELEVATOR POSITIONER | 1 | |
| F72785-106 | TEST EQUIPMENT - ELEVATOR/RUDDER/AILERON POWER CONTROL UNIT | 1 | |
| F72785-107 | TEST EQUIPMENT - ELEVATOR/RUDDER/AILERON POWER CONTROL UNIT | 1 | |
| F72785-108 | TEST EQUIPMENT - ELEVATOR/RUDDER/AILERON POWER CONTROL UNIT | 1 | |
| F72785-11 | TEST EQUIPMENT - ELEVATOR/RUDDER/AILERON POWER CONTROL UNIT | 3 | |
| F72785-12 | TEST EQUIPMENT - ELEVATOR/RUDDER/AILERON POWER CONTROL UNIT | 3 | |
| F72785-13 | TEST EQUIPMENT - ELEVATOR/RUDDER/AILERON POWER CONTROL UNIT | 4 | |
| F72785-53 | TEST EQUIPMENT - ELEVATOR/RUDDER/AILERON POWER CONTROL UNIT | 1 | |
| F72785-54 | TEST EQUIPMENT ELEVATOR/ RUDDER/ AILERON POWER CTR | 2 | |
| F72785-551 | TEST EQUIPMENT - ELEVATOR/RUDDER/AILERON POWER CONTROL UNIT | 1 | |
| F72785-552 | TEST EQUIPMENT - ELEVATOR/RUDDER/AILERON POWER CONTROL UNIT | 2 | |
| F72785-553 | TEST EQUIPMENT - ELEVATOR/RUDDER/AILERON POWER CONTROL UNIT | 1 | |
| F72785-554 | TEST EQUIPMENT - ELEVATOR/RUDDER/AILERON POWER CONTROL UNIT | 1 | |
| F72785-555 | TEST EQUIPMENT - ELEVATOR/RUDDER/AILERON POWER CONTROL UNIT | 1 | |
| F72785-557 | TEST EQUIPMENT - ELEVATOR/RUDDER/AILERON POWER CONTROL UNIT | 1 | |
| F72785-573 | TEST EQUIPMENT - ELEVATOR/RUDDER/AILERON POWER CONTROL UNIT | 2 | |
| F72785-XX | Test Equipment -Elevator/Rudder/Aileron Power Control Unit | 1 | |
| F72877 | SAFETY PIN -0 ELEVATOR FEEL COMPUTER TO PREVENT | 1 | |
| F72877-1 | PIN SAFETY ELEVATOR | 1 | |
| F72877-2 | PIN SAFETY ELEVATOR | 1 | |
| F72928 | AIR PRESSURE REGULATOR EQPT-ELEVATOR FEEL COMPUTER | 1 | |
| F72928-107 | AIR PRESSURE REGULATOR EQUIPMENT - ELEVATOR FEEL COMPUTER | 1 | |
| F72928-108 | AIR PRESSURE REGULATOR EQUIPMENT - ELEVATOR FEEL COMPUTER | 2 | |
| F72928-109 | AIR PRESSURE REGULATOR EQUIPMENT - ELEVATOR FEEL COMPUTER | 4 | |
| F72928-110 | AIR PRESSURE REGULATOR EQUIPMENT - ELEVATOR FEEL COMPUTER | 4 | |
| F72928-111 | AIR PRESSURE REGULATOR EQUIPMENT - ELEVATOR FEEL COMPUTER | 3 | |
| F72928-33 | Air Pressure Regulator Equipment - Elevator Feel Computer | 4 | |
| F72928-34 | Air Pressure Regulator Equipment - Elevator Feel Computer | 1 | |
| F72928-52 | Air Pressure Regulator Equipment - Elevator Feel Computer | 4 | |
| F72928-52 / -53 | REGULATOR AIR PRESSURE KIT ELEVATOR FEEL COMP. | 1 | |
| F72928-53 | Air Pressure Regulator Equipment - Elevator Feel Computer | 5 | |
| F72928-54 | Air Pressure Regulator Equipment - Elevator Feel Computer | 2 | |
| F72928-58 | Air Pressure Regulator Equipment - Elevator Feel Computer | 11 | |
| F72928-58+A8529 | Air Pressure Regulator Eqpt - Elevator Feel Comp | 1 | |
| F72928-62 | Air Pressure Regulator Equipment - Elevator Feel Computer | 8 | |
| F72928-63 | Air Pressure Regulator Equipment - Elevator Feel Computer | 11 | |
| F72928-63. | Air Pressure regulator Equipment-Elevator Feel Com. | 11 | |
| F72928-XX | Air Pressure Regulator Equipment -Elevator Feel Computer | 1 | |
| F72929-62 | AIR PRESSURE REGULATOR EQUIPMENT - ELEVATOR FEEL COMPUTER | 1 | |
| F72978-1 | Rigging beam-elevators，zero position | 6 | |
| F73007 | ELECTRONIC TEST EQUIPMENT-ELEVATOR FEEL AND | 1 | |
| F7XC552900070A1 | ELEVATOR CENTERING PIN DIAMETER 8 | 1 | |
| F7XC552900071A1 | ELEVATOR CENTERING PIN DIAMETER 10 | 1 | |
| F7XC552900072A1 | ELEVATOR CENTERING PIN DIAMETER 12 | 1 | |
| F80026-1 | ADAPTOR ELEVATOR HOIST | 8 | |
| F80063-501 | FIXTURE - ELEVATOR RIGGING AND RESTRAINING (THE BOEING COMPANY) | 16 | |
| F80113-105 | ROLLER SWAGE -KIT REQUIRED FOR B737 ELEVATOR ASSEMBLY AND TAB ASSEMBLY, P/N- 183A0103-1 | 17 | |
| F80113-64 | ROLLER SWAGE -KIT REQUIRED FOR B737 ELEVATOR ASSEMBLY AND TAB ASSEMBLY, P/N- 183A0103-1 | 11 | |
| F80153-1 | Safety Pin - Elevator Feel Computer | 17 | |
| F80153-8 | SAFETY PIN ELEVATOR FEEL COMPUTER | 1 | |
| F80170-1 | TEST MANIFOLD BYPASS VALVE AILERON/ELEVATOR PCU | 3 | |
| F80217-125 | Test Set - Autopilot Elevator/Rudder/Aileron Control Unit. | 1 | |
| F80217-139 | Test Set -Sp177/Sp300 Autopilot. Rudder/Elevator/Aileron | 10 | |
| F80230 | RIGGING BEAM - ELEVATOR INDEX PLATE | 1 | |
| F80230-1 | Rigging Beam -Elevator Index Plate Installation | 6 | |
| FAT-Y472 | TRIPOD, BACKLASH TEST - AILERON/ELEVATOR/ROLL | 1 | |
| FAT-Y487 | CLIP, BACKLASH MEAS-UREMENT - AILERON/ELEVATOR/RUDDER | 1 | |
| FE259-901 | RETAINER - ELEVATOR CONTROL REGULATOR, P/N: FE259-901 | 2 | |
| FG5 | RIGGING BAR EQUIPMENT - ELEVATOR TAB C27028-1 | 1 | |
| FTE-02-35-32000-1 | PROTRACTOR ELEVATOR SERVO TAB | 1 | |
| FTE-02-35-32000-2 | PROTRACTOR ELEVATOR TRIM TAB | 1 | |
| G1002730045-001 | ELEVATOR NEUTRAL POSITIONING KIT | 2 | |
| G27023-107 | MEASUREMENT EQUIPMENT - INBOARD ELEVATOR PCA | 1 | |
| G27023-126 | MEASUREMENT EQUIP - INBOARD ELEVATOR PCA | 2 | |
| G27035 | SLING EQPT -0 INBD/OUTBD ELEVATOR | 1 | |
| G27035-1 | Sling eqpt-inbd/outbdelevator | 5 | |
| G27035-29 | Sling eqpt-inbd/outbdelevator | 3 | |
| G27048-1 | TEST EQUIPMENT - INBOARD ELEVATOR ACTUATOR | 8 | |
| G27090 | REM/INSTL ADAPTER-INBOARD ELEVATOR ACTUATOR | 1 | |
| G27090-1 | REMOVAL/INSTALLATION ADAPTER - INBOARD ELEVATOR ACTUATOR (CE) | 2 | |
| G27090-54 | REMOVAL/INSTALLATION ADAPTER - INBOARD ELEVATOR ACTUATOR (CE) | 1 | |
| G34002-4 | DMA ELEVATOR PITOT PROBE | 4 | |
| G600-273004-85 | ELEVATOR O POSITION RIGGING | 2 | |
| G600-273004−85 | KIT - ELEVATOR ’0’ POSITION RIGGING (LH/RH) | 2 | |
| G600−273004−85 | KIT − ELEVATOR ’0’ POSITION RIGGING (LH/RH) | 2 | |
| G601R270005-1 | PLATE - AILERON/ELEVATOR BACKLASH CHECK | 5 | |
| G601R270005−1 | Plate − Aileron/Elevator Backlash Checks | 5 | |
| G60R270005-1 | PLATE, AILERON AND ELEVATOR BACLASH CHEC | 1 | |
| G670-271401-1 | GENERATOR- PCU DIFFERENTIAL PRESSURE. AILERON / ELEVATOR | 6 | |
| G670271401-1 | KIT-AILERON/ELEVATOR PCU HEALTH CHECKS | 6 | |
| G670271401−1 | Generator − PCU Differential Pressure Aileron/ Elevator | 6 | |
| G700-270003-1 | Kit - Rudder/Elevator Rigging Pins | 4 | |
| G700-270003-1 | KIT, RUDDER/ELEVATOR RIGGING PI | 4 | |
| G700-271105-1 | TEST CABLE − ELEVATOR PCU VALVE LEAK CHECK (20 FT (6.10 M) LONG) | 4 | |
| G700-273001-1 | KIT, ELEVATOR PCU BOLT REMOVER | 1 | |
| G700-273002-1 | KIT, REAMERS ELEVATOR PCU FITTINGS | 1 | |
| G700-273103-1 | TEST CABLE ELEVATOR PCU VALVE LEAK CHECK 20 F | 5 | |
| G700-273106-1 | RETAINING BAR - ELEVATOR TENSION REGULATOR (OPTIONAL PART NUMBER) | 2 | |
| G700???270003???1 | KIT ??? RUDDER/ELEVATOR RIGGING PINS | 4 | |
| G700???273103???1 | TEST CABLE ??? ELEVATOR PCU VALVE LEAK CHECK 20 F | 5 | |
| G700−270003−1 | KIT − RUDDER/ELEVATOR RIGGING PINS | 4 | |
| G700−273103−1 | TEST CABLE − ELEVATOR PCU VALVE LEAK CHECK (20 FT (6.10 M) LONG) | 5 | |
| GAP510RP5-50 | RIG PINS (AILERON / ELEVATOR CONTROL MODULE) | 1 | |
| GMIDS34CK010-2 | TEMPERATURE & PROCESS CONTROLLER FOR ELEVATOR THERMOGRAPHY | 1 | |
| GSB2700008-27 | ELEVATOR TENSION REGULATOR SPACER | 2 | |
| GSB2700008-27-IAS | Spacer elevator tension regulator | 1 | |
| GSB2700008-28-IAS | Spacer elevator tension regulator | 1 | |
| GSB2715003 | TOOL-LEFT ELEVATOR RIGGING (DRAWING AND MYLAR TEMPLATE) | 2 | |
| GSB2715004 | TOOL-RIGHT ELEVATOR RIGGING (DRAWING AND MYLAR TEMPLATE) | 1 | |
| GSE 196 | CLAMP-LOCKING, ELEVATOR | 1 | |
| GSE 27X-00-03 | KIT- RUDDER/ELEVATOR RIGGING PINS | 1 | |
| GSE 27X-31-03 | TEST CABLE ELEVATOR PCU | 1 | |
| GSE 304 | TRIPOD, BACKLASH TEST - AILERON/ELEVATOR/ROLL | 1 | |
| GSE 310 | CLIP, BACKLASH MEASUREMENT - AILERON/ELEVATOR/RUDDER | 1 | |
| GSE087 | LOCK COLLAR, PCU ELEVATOR | 1 | |
| GSE2700379 | ELEVATOR ACTUATOR OUTPUT CRANK SECURING TOOL-GSE2700379 | 1 | |
| GSE2720443 | ELEVATOR RANGE TEMPLATE, LEFT | 1 | |
| GSE2720444 | ELEVATOR RANGE TEMPLATE, RIGHT | 1 | |
| HC130H1009-000 | CHARGING ADAPTOR ELEVATOR | 1 | |
| HTC73-75PPCW | COVER ELEVATOR PITOT PROBES | 5 | |
| J27013-20 | SLING EQUIPMENT - ELEVATOR REMOVAL/INSTALLATION (CE) | 4 | |
| J27013-27 | SLING EQUIPMENT - ELEVATOR REMOVAL/INSTALLATION (CE) | 8 | |
| J27013-55 | SLING EQUIPMENT - ELEVATOR REMOVAL/INSTALLATION | 3 | |
| J27016 | REM/INSTLEQPT-ELEVATORPOWERCONTROLUNIT(PCU) | 1 | |
| J27016-46 | REMOVAL/INSTALLATION EQUIPMENT - ELEVATOR POWER CONTROL UNIT (PCU) | 15 | |
| J27016-76 | Rem/instl eqpt-elevator power control unit | 3 | |
| J27019 | PIN SET-BYASS,ELEVATOR PCU | 1 | |
| J27019-1 | PIN SET - BYPASS, ELEVATOR PCU | 13 | |
| J270191 | PIN-SET,BYPASS/ELEVATOR PCU | 13 | |
| J2702-38 | LOCK POWER CONTROL UNIT, ELEVATOR | 1 | |
| J27028 | LOCK RUDDER AND ELEVATOR POWER CONTROL UNIT | 1 | |
| J27028-1 | LOCK - POWER CONTROL UNIT, ELEVATOR | 1 | |
| J27028-14 | LOCK - RUDDER AND ELEVATOR POWER CONTROL UNIT | 16 | |
| J27028-15 | LOCK, RUDDER AND ELEVATOR POWER CONTROL UNIT | 2 | |
| J27028-20 | LOCK - RUDDER AND ELEVATOR POWER CONTROL UNIT | 13 | |
| J27028-21 | LOCK - RUDDER AND ELEVATOR POWER CONTROL UNIT | 13 | |
| J27028-31 | LOCK - RUDDER AND ELEVATOR POWER CONTROL UNIT | 11 | |
| J27028-38 | LOCK - RUDDER AND ELEVATOR POWER CONTROL UNIT (PCU) | 6 | |
| J27028-39 | LOCK - RUDDER AND ELEVATOR POWER CONTROL UNIT (PCU) | 6 | |
| J27028-40 | LOCK - RUDDER AND ELEVATOR POWER CONTROL UNIT (PCU) | 4 | |
| J27028-41 | LOCK - RUDDER AND ELEVATOR POWER CONTROL UNIT (PCU) | 4 | |
| J2702814 | LOCK RUDDER & ELEVATOR POWER CONT. U | 16 | |
| J27073-1 | TEST EQUIPMENT - ELEVATOR FEEL UNIT, LATERAL AND RUDDER CONTROLS | 1 | |
| J27073-275 | TEST EQUIPMENT - ELEVATOR FEEL UNIT, LATERAL AND RUDDER CONTROLS | 1 | |
| J27078-38 | INSPECTION EQUIPMENT, ELEVATOR FREEPLAY | 1 | |
| J27079 | INSPECTION EQUIPMENT-ELEVATOR PREEPLAY | 1 | |
| J27079-1 | ELEVATOR P.C.U.FREEPLAY INS KIT | 2 | |
| J27079-31 | INSPECTION EQUIPMENT - ELEVATOR FREEPLAY | 5 | |
| J27079-32 | INSPECTION EQUIPMENT - ELEVATOR FREEPLAY | 4 | |
| J27079-32(~?) | INSPECTION EQUIPMENT -0 ELEVATOR FREEPLAY | 4 | |
| J27079-38 | INSPECTION EQUIPMENT - ELEVATOR FREEPLAY | 12 | |
| J27079-38 | INSPECTION EQUIPMENT - ELEVATOR FREE PLAY | 12 | |
| J27079-39 | ELEVATOR FREE PLAY KIT | 1 | |
| J27079-4 | ELEVATOR SUCTION PLATE FREEPLAY | 2 | |
| J27079-43 | INDICATOR, INSPECTION EQUIP-ELEVATOR | 2 | |
| J27079-57 | INSPECTION EQUIPMENT - ELEVATOR FREEPLAY | 7 | |
| J27131-1 | Power control unit lock-elevator | 4 | |
| J27152-1 | SLING EQUIPMENT, ELEVATOR REMOVAL/INSTALLATION | 1 | |
| J27152-95 | SLING EQUIPMENT - ELEVATOR REMOVAL/INSTALLATION | 1 | |
| K13-0074/9SF5285 | ELEVATOR ACTUATOR HOIST ADAPTER | 1 | |
| K27005 | REMOVAL/INSTALLATION EQPT -0 ELEVATOR PCU | 1 | |
| K27005-1 | Removal / Installation Equip - Elevator PCU | 1 | |
| K27005-63 | Removal Installation Equipment - Elevator PCU | 1 | |
| K27018 | LOCK RUDDER AND ELEVATOR POWER CONTROL UNIT | 1 | |
| K27020-1 | EXTENSION - BYPASS VALVE ELEVATOR POWER CONTROL UNX | 1 | |
| K27023 | SLING EQUIPMENT -0 ELEVATOR REMOVAL/INSTALLATION | 1 | |
| K27023-1 | Sling Eqpt - Elevator Removal/Installation | 1 | |
| K27023-38 | Sling Equipment -Elevator Removal/Installation (Ce) | 1 | |
| K27023-38 Upgrade | Sling equipment-elevator removal/installation | 1 | |
| K27023-42 | SLING EQUIPMENT - ELEVATOR REMOVAL/INSTALLATION (CE) | 1 | |
| K27023-43 | Sling Eqpt - Elevator Rem/Instl | 1 | |
| K27023-50 | Sling Eqpt - Elevator Rem/Instl | 1 | |
| K27023-64 | SLING EQUIPMENT - ELEVATOR REMOVAL/INSTALLATION (CE) | 8 | |
| K27046 | LOCK-ELEVATOR PCU | 1 | |
| K27046-1 | LOCK-ELEVATOR PCU | 1 | |
| K27046-10 | LOCK-ELEVATOR PCU | 1 | |
| K27046-15 | LOCK EQUIPMENT - ELEVATOR POWER CONTROL UNIT (CE) | 5 | |
| K27046-2 | LOCK-ELEVATOR PCU | 1 | |
| K27046-21 | Lock Eqpt - Elevator PCU | 1 | |
| K27046-31 | LOCK EQUIPMENT - ELEVATOR POWER CONTROL UNIT (CE) | 2 | |
| K27046-42 | LOCK EQUIPMENT - ELEVATOR POWER CONTROL UNIT | 6 | |
| K27046-5 | LOCK-ELEVATOR PCU | 1 | |
| K27046-51 | LOCK, ELEVATOR POWER CONTROL UNIT | 7 | |
| K27046-54 | LOCK, ELEVATOR POWER CONTROL UNIT | 1 | |
| K27046-7 | LOCK-ELEVATOR PCU | 1 | |
| K27046-8 | LOCK-ELEVATOR PCU | 1 | |
| K27056 | SUPPORT EQPT-ELEVATOR PCU | 1 | |
| K27056-1 | Support Equipment - Elevator PCU | 1 | |
| K27056-176 | REMOVAL/INSTALLATION EQUIPMENT - ELEVATOR POWER CONTROL UNIT (CE) | 3 | |
| K27056-177 | REMOVAL/INSTALLATION EQUIPMENT - ELEVATOR POWER CONTROL UNIT (CE) | 3 | |
| K27056-50 | REMOVAL/INSTALLATION EQUIPMENT - ELEVATOR POWER CONTROL UNIT (CE) | 5 | |
| K27056-63 | REMOVAL/INSTALLATION EQUIPMENT -ELEVATOR POWER CONTROL UNIT (CE) | 1 | |
| KPC3-640-35 | ELEVATOR PITOT STATIC PROBE COVER | 11 | |
| KPC3-910-55 | PITOT COVER ELEVATOR FEEL | 4 | |
| M16470 | ELEVATOR CONTRL IDLER PCU LINK ASSY | 1 | |
| MIT002A0014-12 | ELEVATOR INPUT TORQUE TUBE MODIFICATION | 12 | |
| MIT002A0014-12 | ELEVATOR INPUT TORQUE TUBE MODIFICATION | 12 | |
| MIT183A8100 | ELEVATOR TAB ASSEMBLY SUPPORT TOOL | 2 | |
| MIT65-45102-51 | MISC TOOL RIGGING PIN - ELEVATOR | 1 | |
| MIT65-72781-1 | RIGGING BEAM-ELEVATORS,ZERO POSITION | 1 | |
| MIT65-73715-1 | MISC. TOOL ELEVATOR AND TAB TRAVEL PROTRACTOR | 2 | |
| MIT65-73715-1,-2 | MISC. TOOL ELEVATOR AND TAB TRAVEL PROTRACTOR | 1 | |
| MIT65-73715-2 | MISC. TOOL ELEVATOR AND TAB TRAVEL PROTRACTOR | 1 | |
| MIT65B80326-6 | ADAPTER - PROTRACTOR, CRANK ASSEMBLY, ELEVATOR TORQUE TUBE | 1 | |
| MIT65B80549 | ADAPTER - TORQUE WRENCH, OUTBOARD ELEVATOR POWER CONTROL UNIT (PCU) | 6 | |
| MIT65B80550 | ADAPTER - TORQUE WRENCH, INBOARD ELEVATOR, POWER CONTROL UNIT | 6 | |
| MIT65B81226 | SPANNER SOCKET - FEEL UNIT ASSEMBLY, ELEVATOR CONTROL | 1 | |
| MIT65B81875 | SCREWDRIVER - ADAPTER, RUDDER, ELEVATOR FEEL ACTUATOR | 1 | |
| MTAXA5527605500 | JIG A310 ELEVATOR REPAIR JIG | 1 | |
| MTAXA5527605501 | JIG A310 ELEVATOR REPAIR JIG | 1 | |
| OU131281 | PIN-RIGGING, ARTIFICIAL FEEL UNIT, ELEVATOR MECHANICAL CONTROLS. | 7 | |
| P14789 | DMA ELEVATOR PITOT PROBE | 1 | |
| P14789-4 | ADAPTOR, PITOT ELEVATOR FEEL | 8 | |
| P62261M-4 | PITOT PROBE ADAPTER ELEVATOR FEEL COMPUTER | 5 | |
| P75701HT-4 | ADAPTER - TEST, ELEVATOR FEEL (INCLUDED IN AIR DATA ACCESSORY KIT | 1 | |
| PC12-310 | HORIZONTAL STABILIZER COVERS, WINTER USE, HAIL PROTECTION OVER ELEVATORS ONLY (set of 2) | 1 | |
| PC12-315 | HORIZONTAL STABILIZER COVERS, ALL YEAR USE, HAIL PROTECTION OVER ELEVATORS ONLY (set of 2) | 1 | |
| SK382-55-073-1 | ELEVATOR TORQUE TUBE SHIM REPA | 1 | |
| SL90.322-.5625 | ELEVATOR HINGE BOLTS REPLACEMENT | 23 | |
| SPL-10171 | ELEVATOR AFT QUADRANT RIGGING BLOCK EQUIPMENT | 1 | |
| SPL-14181 | MEASUREMENT EQUIPMENT - INBOARD ELEVATOR PCA | 1 | |
| SPL-4267 | INSPECTION EQUIPMENT - ELEVATOR FREEPLAY | 1 | |
| TE27T-31001-15 | TEST EQPT, ELEVATOR TAB | 1 | |
| TE27T-31001-17 | TEST EQPT, ELEVATOR TAB | 1 | |
| TE27T-31001-9 | TEST EQUIP KIT - ELEVATOR/ELEVATOR TAB RIGGING FIXTURE | 1 | |
| TE65B00184 | TEST EQUIPMENT - INBOARD ELEVATOR ACTUATOR | 1 | |
| TEM-273000-001 | RIGGING PIN ELEVATOR | 1 | |
| TEM-273000-003 | RIGGING PIN ELEVATOR | 1 | |
| TF50B27513 | DEVICE FOR CHECKING AILERON AND ELEVATOR TORQUES APPLIED TO CONTROL COLUMN | 1 | |
| TF50B27513A1 | DEVICE FOR CHECKING AILERON AND ELEVATOR TORQUE APPLIED TO CTL COLOMN | 1 | |
| TN502274 | STABILIZER , ELEVATOR FORCE APPLICATION FIXTURE | 1 | |
| TOV 915421 | DUCK BILL PITCH. TEST EQUIPMENT, ELEVATOR TRIM TAB | 1 | |
| TOV 915422 | LOCKING WEDGE.TEST EQUIPMENT, ELEVATOR TRIM TAB | 1 | |
| Upgrade of K27046-15 to K27046-42-K | Lock eqpt-elevator pcu | 1 | |
| Upgrade of K27046-31 to K27046-51 | Lock eqpt-elevator pcu | 1 | |
| VR-D41-2757-30-00 | RIGGING PIN ELEVATOR AND AILERON | 1 | |
| Z-34/22N | Tangga Elevator Pesawat C-130 | 2 | |
| f 80153-1 | safety pin elevator feel | 17 | |
| f80153-1 | safety pin elevator feel | 17 | |
| F72928-58 | REGULATOR - AIR PRESSURE, ELEVATOR FEEL COMPUTER | 11 | |
| GSB2715004 | MYLAR TEMPLATE -RIGHT ELEVATOR RIGGING TOO | 1 | |
| J27028-21 | LOCK - POWER CONTROL UNIT, RUDDER (NOTE: EFFECTIVITY OF J27028-14 FOR -200LR, -300ER & -F IS FOR ELEVATOR USE ONLY) | 13 | |
| С27034-1 | SLING EQPT-ELEVATOR REMOVAL/INSTALLATION | 1 | |
| 98A27303002000 | CENTERING BULLETS AND PINS,ELEVATOR HING | 8 | |
| 98A27901007000 | RIGGING PIN,ELEVATOR CONTROL,USE TO SECU | 7 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
