| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| ELOTEST M2 V3 | EDDY CURRENT TEST | 3 | |
| ELOTESTM2V3 | EDDY CURRENT TEST | 3 | |
| NORTEC 500D | EDDY CURRENT TEST | 1 | |
| NORTEC-600D | EDDY CURRENT TEST | 3 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) PHASEC 2D | EDDY CURRENT TEST SET (CALIBRATION) | 1 | |
| 04/01/6200 | EDDY CURRENT TEST PROBES | 1 | |
| 131387 | EDDY CURRENT CALIBRATION TEST BLOCK | 1 | |
| 10024749 | EDDY CURRENT BOND TESTER | 1 | |
| 145-44131-001 | REFERENCE STANDARD, GENERAL EDDY CURRENT TESTING, ALUMINUM ALLOY | 6 | |
| 145-44131-003 | REFERENCE STANDARD, GENERAL EDDY CURRENT TESTING, STEEL ALLOY | 3 | |
| 145-44131-005 | REFERENCE STANDARD, GENERAL EDDY CURRENT TESTING, TITANIUM ALLOY | 3 | |
| 145T09065-401 | REFERENCE STANDARD NDI (STAINLESS STEEL) -EDDY CURRENT TESTING | 1 | |
| 16/03/6200 | EDDY CURRENT TEST PROBES | 1 | |
| 2-164-501 | AIRBUS EDDY CURRENT CALIBRATION BLOCK 4340 STEEL, 51-10-00-250-801 and 51-63-991-001 PAGE 601 FIGURE 601. Includes Test Report and Certificate of Conformance. | 4 | |
| 2-835-07-6901 | EDDY CURRENT TEST BLOCK | 2 | |
| 2.0837.81 | EDDY CURRENT TESTER | 1 | |
| 2100-95-30 | TESTER, EDDY CURRENT | 1 | |
| 222845 | EDDY CURRENT WHEEL TEST KIT | 1 | |
| 235502 | CASA CN-235 EDDY CURRENT REFERENCE STANDARD PART 5 57-10-05 PAGE 510 FIGURE 504b. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| 29A029 | EDDY CURRENT HFEC CALIBRATION TEST BLOCK | 5 | |
| 3320A96900-301 | CONAIR EDDY CURRENT SURFACE REFERENECE STANDARD. EDM Notches: .008", .020", .040" ( .004" W ± .001"), . MATERIAL 7075-T6 ALUMINUM. SIZE: 1.5"W x 3.00"L x .25" ± .005". Includes Test Report and Certificate of Conformance. | 1 | |
| 3320A96900-303 | CONAIR EDDY CURRENT SURFACE REFERENECE STANDARD. EDM Notches: .008", .020", .040" ( .004" W ± .001"), . MATERIAL 7050-T7451 ALUMINUM. SIZE: 1.5"W x 3.00"L x .25" ± .005". Includes Test Report and Certificate of Conformance. | 1 | |
| 3320A96900-305 | CONAIR EDDY CURRENT SURFACE REFERENECE STANDARD. EDM Notches: .008", .020", .040" ( .004" W ± .001"), . MATERIAL 15-5PH Steel. SIZE: 1.5"W x 3.00"L x .25" ± .005". Includes Test Report and Certificate of Conformance. | 1 | |
| 3320A96900-307 | CONAIR EDDY CURRENT SURFACE REFERENECE STANDARD. EDM Notches: .008", .020", .040" ( .004" W ± .001"), . MATERIAL 6Al-4v Titaniuml. SIZE: 1.5"W x 3.00"L x .25" ± .005". Includes Test Report and Certificate of Conformance. | 1 | |
| 3765A96919-301 | CONAIR EDDY CURRENT SURFACE REFERENECE STANDARD. DHC-8-Q400 FOR INSPECTION OF OUTSIDE FUSELAGE CTS. ALL ALUMINUM PARTS ALODINED. Includes Test Report and Certificate of Conformance. | 1 | |
| 3765A96919-303 | CONAIR EDDY CURRENT SURFACE REFERENECE STANDARD. DHC-8-Q400 FOR INSPECTION OF OUTSIDE FUSELAGE CTS. ALL ALUMINUM PARTS ALODINED. Includes Test Report and Certificate of Conformance. | 1 | |
| 3765A96919-305 | CONAIR EDDY CURRENT SURFACE REFERENECE STANDARD. DHC-8-Q400 FOR INSPECTION OF OUTSIDE FUSELAGE CTS. ALL ALUMINUM PARTS ALODINED. Includes Test Report and Certificate of Conformance. | 1 | |
| 401013 | EDDY CURRENT TEST SET MODEL PHASEC3D | 1 | |
| 40A100M | ENKODER 640-030-040 FOR ROTO TEST EDDY CURRENT INSPECTION | 1 | |
| 40I013 | EDDY CURRENT TEST 3PHASE | 1 | |
| 602-814 | INSTRUMENT - THICKNESS MEASUREMENT, EDDY CURRENT TEST METHOD | 1 | |
| 602-816 | INSTRUMENT - THICKNESS MEASUREMENT, EDDY CURRENT TEST METHOD | 1 | |
| 603-693 | INSTRUMENT - THICKNESS MEASUREMENT, EDDY CURRENT TEST METHOD | 1 | |
| 603-694 | INSTRUMENT - THICKNESS MEASUREMENT, EDDY CURRENT TEST METHOD | 1 | |
| 604-285 | INSTRUMENT - THICKNESS MEASUREMENT, EDDY CURRENT TEST METHOD | 1 | |
| 604-299 | INSTRUMENT - THICKNESS MEASUREMENT, EDDY CURRENT TEST METHOD | 1 | |
| 605-023 | INSTRUMENT - THICKNESS MEASUREMENT, EDDY CURRENT TEST METHOD | 1 | |
| 7075-T6 | REFERENCE STANDARD, GENERAL EDDY CURRENT TESTING, ALUMINUM ALLOY | 1 | |
| 7937739-10 | TESTER, EDDY CURRENT | 1 | |
| 7937739-30 | TESTER, EDDY CURRENT | 1 | |
| 9020210 | EDDY CURRENT TESTER NORTEC TESTER 2000D | 1 | |
| 9222341 | EDDY CURRENT TESTER PROBE 480KHZ | 1 | |
| 9222360 | EDDY CURRENT TESTER PROBE 60KHZ | 2 | |
| 9230159 | EDDY CURRENT TESTER SPARES: PROBE UNIVERSAL ROTARY HOLE (.750-.812) | 1 | |
| 90252206 | PHASEC 3D EDDY CURRENT TEST 3PHASE | 1 | |
| 99A53307274000 | EDDY CURRENT LFEC CALIBRATION TEST BLOCK | 5 | |
| A-E02010300 | EDDY CURRENT EQUIPMENT ELOTEST | 1 | |
| A29-006 | LOCATOR UH-B (EDDY CURRENT TESTER) | 1 | |
| A29-006B | LOCATOR UH-B (EDDY CURRENT TESTER) | 1 | |
| ABL-.030-6/1-3MHZ | EDDY CURRENT BLADE PROBE, STRAIGHT SHAFT, .030"(7.62mm) THICK, 1-3MHz WITH A 2MHz CENTER FREQUENCY, 6.0"(152.4mm) LONG SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test report and Certificate of Conformance. | 1 | |
| AF-2039/TF | FORRESTER HIGH FREQUENCY EDDY CURRENT PROBE, 2-40 KHz, SHEILDED, ABSOLUTE REFLECTION, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5005 | HIGH FREQUENCY SPRING LOADED EDDY CURRENT SURFACE SPOT PROBE, REFLECTION 50-500KHz. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5009 | HIGH FREQUENCY EDDY CURRENT PROBE, DIFFERENTIAL, .200" DROP 10° CRANK. FREQUENCY: 25KHz-100KHz WITH TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5088 | CUSTOM ABSOLUTE EDDY CURRENT SLIDING PROBE, .375" RADIUS WITH .120" WIDE FIN FOR GROOVE INSPECTION, SUPPLIED WITH A TOP MOUNTED TRIAX FISCHER CONNECTOR 25-100KHz. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5100L/2MHZ | CUSTOM EDDY CURRENT SURFACE PROBE LEFT HAND 1-3 MHz WITH MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5100R/2MHZ | CUSTOM EDDY CURRENT SURFACE PROBE RIGHT HAND 1-3 MHz WITH MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5113 | Custom Eddy Current Probe for clamp inspection grooves. Frequency 500KHz-1MHz. Triax Fischer connector, Reflection. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5123/4F | CUSTOM PIVOTING EDDY CURRENT PROBE DIFFERENTIAL 50-100KHz. 4-PIN FISCHER CONNECTOR. AIRBUS A300-600 PT 6 53-19-27 PAGE 619. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5140 | Custom Eddy Current Encirling Probe, .890"Ø ID, 500KHz-1MHz Differential, Triax Fischer Connector. Inspecting ASTM A513 Type 5 Steel Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5141/TF | CUSTOM EDDY CURRENT PENCIL PROBE(DELRIN - BLACK ACETAL), STRAIGHT SHAFT WITH THE COIL CENTERED AT THE TIP .250"Ø, 50-500KHz UNSHIELDED WITH TRIAX FISCHER CONNECTOR, 3.0: LONG. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5173 | Custom Eddy Current Encirling Probe, 10mm (.3937"Ø) ID, 200KHz-2MHz Differential Supplied with a Triax Fischer Connector. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5173/2.25mm | Custom eddy current encircling probe for 2.25mm tube (outer diameter), inner diameter of coil housing 2.5mm, 50kHz – 500kHz, bridge differential, triax connector, include test report and certificate of conformance. | 1 | |
| AF-5173/4MM | Custom Eddy Current Encirling Probe, 4mm tube (outer diameter), 50KHz-500kHz, bridge differential, Supplied with a Triax Fischer Connector. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5173/7.5mm | Custom eddy current encircling probe for 7.25mm tube (outer diameter), inner diameter of coil housing 7.5mm, 50kHz – 500kHz, bridge differential, triax connector, include test report and certificate of conformance. | 1 | |
| AF-5221 | CUSTOM HIGH FREQUENCY EDDY CURRENT PROBE FOR EDGE DEFECT DETECTION FOR THE KC10 ARB SUPPORT FITTING. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5226 | CUSTOM MICRO INDEXING EDDY CURRENT SURFACE PROBE ASSEMBLY WITH 3 PROBE TIPS: 100KHz-300KHz, 500KHz, 1-3MHz. INCLUDES Includes Test Report and Certificate of Conformance. Reference: MD-11 Section 2-2 figure 2.7 PG.5. | 1 | |
| AF-5239 | Custom Eddy Current Pencil Probe with Plexiglass Collar, Absolute Bridge, Shielded, 1-2MHz, Supplied with a Triax Fischer Connector. Includes Test Report and Certificate of conformance. | 1 | |
| AF-5347 | Low Frequency Reflection Eddy Current Probe, 1-20 khz, 90°, 5/16"(.312") Diameter Tip, .500" Drop, 6" Long Supplied with a Triax Fischer Triaxial Connector. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5444 | Custom Eddy Current Detachable Pencil Probe Supplied with Plexiglass Collar, Absolute Bridge Unshielded, 100KHz-500KHz, Supplied with a Triax Fischer Connector. Includes Test Report and Certificate of conformance...P/100KHZ-500KHZ/AU | 1 | |
| AF-5445 | Custom Eddy Current Detachable Pencil Probe Supplied with Plexiglass Collar, Absolute Bridge Unshielded, 500KHz-1MHz, Supplied with a Triax Fischer Connector. Includes Test Report and Certificate of conformance...P/500KHZ-1MHZ/AU | 1 | |
| AF-5446 | Custom Eddy Current Detachable Pencil Probe Supplied with Plexiglass Collar, Differential Shielded, 4-6Mhz, Supplied with a Triax Fischer Connector. Includes Test Report and Certificate of conformance...P/100KHZ-500KHZ/AU | 1 | |
| AF-5448 | Custom Eddy Current Detachable Pencil Probe Supplied with Plexiglass Collar, Differential Shielded, 50KHz-100KHz, Supplied with a Triax Fischer Connector. Includes Test Report and Certificate of conformance. P/50KHZ-100KHZ/AU | 1 | |
| AF-5451 | Custom Eddy Current Detachable Pencil Probe Supplied with Plexiglass Collar, Reflection Unshielded, 100KHz-1MHz, Supplied with a Triax Fischer Connector. Includes Test Report and Certificate of conformance.....PR/100KHZ-1MHZ/AU | 1 | |
| AF-5452 | Custom Eddy Current Detachable Pencil Probe Supplied with Plexiglass Collar, Reflection Unshielded, 1MHz-3MHz, Supplied with a Triax Fischer Connector. Includes Test Report and Certificate of conformance.....PR/1MHZ-3MHZ/AU | 1 | |
| AF-5456 | Custom Boeing 727 Eddy Current Manual Bolt Hole Probe, 13KHz, .625"Ø, 2.0" Working Length Supplied with a 1.25" Max Collar Length. Supplied with a Triax Fischer whch has an Internal Balance Coil. Includes Test Report and Certificate of Conformance........ | 1 | |
| AF-5457 | Custom Eddy Current Detachable Pencil Probe Supplied with Plexiglass Collar, Absolute Shielded, 100KHz-500KHz, Supplied with a Microdot Connector. Includes Test Report and Certificate of conformance. | 1 | |
| AF-MBB403-7-1 | CUSTOM STAINLESS STEEL EDDY CURRENT ROTARY PROBE INCLUDING COLLAR, FREQUENCY 100KHz-2MHz WITH 4 PIN FISCHER CONNECTOR. REFERENCE: AIRBUS A300-600 FIGURE 603 PART 6 53-19-27 PAGE 604 PROCEDURE A. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-0212-1 | EDDY CURRENT SURFACE REFERENCE BLOCK. 2 EDM NOTCHES ( .012"D, .020"D, x .005" W +/- .001"), INCONEL 718. SIZE: 1.0"W x 3.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-032/10MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 10mm diameter hole. Corner EDM notch( 0.76mm long +/- 0.07 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-0512A | Eddy Current Hole and Surface Crack Standard: 7075-T651 Aluminum.. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-0512A. | Eddy Current Surface Crack Standard. EDM Notch Size: Total of 3 Notches, 0.005, 0.010, 0.020 Deep x .005W +/- .002 per 33B-1-2 WP 402 00. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-0512T | Eddy Current Hole and Surface Crack Standard: 6AL-4v Titanium.. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1017AL | Custom Eddy Current Hole Standard 7075-T7 Aluminum ( Equivalent substitute for 7010 Aluminum). Hole Sizes 1.77" and 0.58" diameter. EDM flaw size: 0.5mm(.020") x 0.1mm (0.004") +/- .002". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1030/10MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 10mm diameter hole. Midwall EDM notch( 9.5mm long +/- 0.95 )x ( 0.13mm deep +/- 0.01 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1030/12MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 12mm diameter hole. Midwall EDM notch( 9.5mm long +/- 0.95 )x ( 0.13mm deep +/- 0.01 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1030/6MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 6mm diameter hole. Midwall EDM notch( 9.5mm long +/- 0.95 )x ( 0.13mm deep +/- 0.01 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1030/8MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 8mm diameter hole. Midwall EDM notch( 9.5mm long +/- 0.95 )x ( 0.13mm deep +/- 0.01 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1031/10MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 10mm diameter hole. Midwall EDM notch( 1.5mm long +/- 0.15 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1031/12MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 12mm diameter hole. Midwall EDM notch( 1.5mm long +/- 0.15 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1031/6MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 6mm diameter hole. Midwall EDM notch( 1.5mm long +/- 0.15 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1031/8MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 8mm diameter hole. Midwall EDM notch( 1.5mm long +/- 0.15 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1032/10MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 10mm diameter hole. Corner EDM notch( 0.76mm long +/- 0.07 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1032/12MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 12mm diameter hole. Corner EDM notch( 0.76mm long +/- 0.07 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1032/6MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 6mm diameter hole. Corner EDM notch( 0.76mm long +/- 0.07 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1032/8MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 8mm diameter hole. Corner EDM notch( 0.76mm long +/- 0.07 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1074-3 | EDDY CURRENT SURFACE BLOCK MADE OF 6AL-4V TITANIUM WITH 3 SURFACE NOTCHES ACROSS THE WIDTH OF THE BLOCK. .1mm X .005" MAX WIDTH and .2mm X .005" MAX WIDTH, .5MM X.005" MAX WIDTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1080/4340 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES 0.5mm, 1.0mm, 2.0mm, 3.00mm, 4.0mm, 5.0mm (.004"W +/- .002, MAX.006), 4340 STEEL 1.0"W x 7.0"L. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2004 | EDDY CURRENT SURFACE STANDARD WITH 3 EDM NOTCHES: ( .005", .010", .020" Deep x .004"Wide +/- .002 ), MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/13-8 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002), 13-8PH STEEL. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/13-8PH | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002), 13-8PH MO STEEL. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/15-5PH | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002), 15-5PH STEEL. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/17-4 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002), 17-4PH STEEL. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/17-7PH | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002), 17-7PH STEEL. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/2014-T6 | EDDY CURRENT SURFACE REFERENCE STANDARD, EDM NOTCHES .008", .020", .040" (.004W +/- .002), MATERIAL: 2014-T6 ALUMINUM. SIZE: 4.0"L x 1.0"W x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/2024 | EDDY CURRENT SURFACE REFERENCE STANDARD, EDM NOTCHES .008", .020", .040" (.004W +/- .002), MATERIAL: 2024-T3 ALUMINUM. SIZE: 4.0"L x 1.0"W x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/2024-T6 | EDDY CURRENT SURFACE REFERENCE STANDARD, EDM NOTCHES .008", .020", .040" (.004W +/- .002), MATERIAL: 2024-T6 ALUMINUM. SIZE: 4.0"L x 1.0"W x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/300M | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002), MATERIAL: 300M STEEL. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/301 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002, MAX.006), CRES 301 1/2 HARD(MIL-S-5059) 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/304 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002), 304 STAINLESS STEEL 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/304L | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002), 304L STAINLESS STEEL. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/316SS | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002), 316 STAINLESS STEEL 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/4130 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002), 4130 STEEL. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/4340 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002), 4340 STEEL. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/6061-T6 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008"(0.2mm), .020"(0.5mm), .040"(1.0mm) (.004"W +/- .002), 6061-T6 ALUMINUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance and Material Certification. | 1 | |
| AFNDT-2030/7075-T6 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002), 7075-T6 ALUMINUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/7075-T7 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002), 7075-T7 ALUMINUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/718 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002), 718 INCONNEL. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/I600 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002), 600 SERIES INCONNEL. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/MAR | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008"(0.2mm), .020"(0.5mm), .040"(1.0mm) (.004"W +/- .002). MATERIAL: 250 MARAGING STEEL. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/N200 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002), MATERIAL: NICKEL 200. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/TI | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002, MAX .006"), 6AL-4v TITANIUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and COC | 1 | |
| AFNDT-2030CS | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002, MAX.006), 4130 or 4340 STEEL. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030INC | EDDY CURRENT SURFACE REFERENCE BLOCK, EDM NOTCHES ( .008", .020", .040" x .004" W +/- .002"), INCONEL 718. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2038AL | EDDY CURRENT CALIBRATION BLOCK 2024-T351, WITH .020"Lx.005"W COUNTERSINK SURFACE EDM NOTCH IN EACH HOLE. HOLE SIZES: .156"Ø and .187"Ø. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2107/4340 | EDDY CURRENT SURFACE REFERENCE STANDARD. EDM FLAWS: .008", .020", .040" (.005" Maximum Width). MATERIAL: 4340 STEEL. SIZE: 1.0"W x 4.0"L x .25"H. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2107/6AL4V | EDDY CURRENT SURFACE REFERENCE STANDARD. EDM FLAWS: .008", .020", .040" (.005" Maximum Width). MATERIAL: 6AL-4V TITANIUM. SIZE: 1.0"W x 4.0"L x .25"H. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2107/7075T6 | EDDY CURRENT SURFACE REFERENCE STANDARD. EDM FLAWS: .008", .020", .040" (.005" Maximum Width). MATERIAL: 7075-T6 ALUMINUM. SIZE: 1.0"W x 4.0"L x .25"H. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2110 | CUSTOM EDDY CURRENT TEMPLATE.2024-T3 ALUMINUM .063" THICK PLATE. (SELECTED RIVETS). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2110-.201 | CUSTOM EDDY CURRENT TEMPLATE.2024-T3 ALUMINUM .063" THICK PLATE. (.201" DIAMETER HOLE). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2110-.500D | CUSTOM EDDY CURRENT TEMPLATE.2024-T3 ALUMINUM .063" THICK PLATE. (.500" DIAMETER HOLE D SHAPE). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2110-.812 | CUSTOM EDDY CURRENT TEMPLATE.2024-T3 ALUMINUM .063" THICK PLATE. (.812" DIAMETER HOLE). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2110-.950 | CUSTOM EDDY CURRENT TEMPLATE.2024-T3 ALUMINUM .063" THICK PLATE. (.950" DIAMETER HOLE). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2110-1.06 | CUSTOM EDDY CURRENT TEMPLATE.2024-T3 ALUMINUM .063" THICK PLATE. (1.06" DIAMETER HOLE). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2114AL | EDDY CURRENT SURFACE REFERENCE STANDARD, EDM NOTCHES .008", .020", .040" (.006W +/- .001). BLOCK SIZE:3.156 "L x 1.375"W x .312"H. MATERIAL: 2024-T3 ALUMINUM.. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2120 | CUSTOM EDDY CURRENT BLOCK, 4340, 4X1X.250, EDM .2MM, .5MM, 1.0MM X .005±.002. ADD.003 NON-CONDUCTIVE SHIMS. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2227Ti | CUSTOM TITANIUM EDDY CURRENT MULTI HOLE STANDARD WHICH COMBINES BOEING PART NUMBERS NDT1022-NDT1027 STANDARDS INTO ONE PART..HOLE SIZES ( 0.188", 0.250", 0.313", 0.375",0.438", 0.500" ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3015 | EMBRAER 170/190 SERIES EDDY CURRENT SURFACE REFERENCE STANDARD 50-00-00 PT 1 PAGE 4, Aluminum(7075-T6) 3 EDM SLOTS (0.2mm, 0.5mm,1.0mm DEEP) x (0.05mm WIDE). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3019S | CUSTOM AIR FORCE EDDY CURRENT BOLT HOLE STANDARD PER CUSTOMER SUPPLIED DRAWING, 1/4" 8630 STEEL PLATE (4130 EQUIVALENT ALTERNATIVE). EDM: 0.030 x 0.030 CORNER NOTCH. HOLE DIAMETER= 0.437Ø. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3026AL | EDDY CURRENT SURFACE REFERENCE STANDARD Leonardo Helicopters SB No. 109EP-158. MATERIAL: 7475-T7 ALUMINUM. SIZE: 1.0" x 3.0" x .25" EDM SLOT (0.5mm DEEP) x (0.05-0.25mm WIDE) +/-.03mm. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3035SS | EDDY CURRENT SURFACE REFERENCE STANDARD. EDM NOTCHES: .005", .010", .020", .060" (.005"W +/- .002, MAX.007" WIDE). MATERIAL: 301 1/2 HARD STAINLESS STEEL(MIL-S-5059) 1.0"W x 4.0"L x .125", NOTE: .750" DISTANCE BETWEEN EACH NOTCH. Includes Test Repor... | 1 | |
| AFNDT-3036AL | CUSTOM 2 HOLE EDDY CURRENT REFERENCE STANDARD. MATERIAL: 7075-T6 ALUMINUM. HOLE SIZES: .250" and .875" WITH a .030" x .030" x .007" MAX WIDTH CORNER EDM NOTCH IN EACH HOLE. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3037 | CUSTOM EDDY CURRENT HOLE REFERENCE STANDARD. MATERIAL: 718 INCONEL. HOLE SIZE: .256"Ø WITH a 0.1" x 0..1" x .010" +/- .002" EDM NOTCH IN THE BOTTOM RADIUS OF THE HOLE. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3058/INC | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .5mm, 1.0mm, 2.0mm x (.006"Wide +/- .001). MATERIAL: 718 Inconel. SIZE: 1.0" Wide x 4.0" Long x 0.25" Thick. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3058SS | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES: 0.5mm, 1.0mm, 2.0mm x (.005"Wide + .000/-.002). MATERIAL: 304 Stainless Steel. SIZE: 1.0" Wide x 4.0" Long x 0.25" Thick. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3059 | Custom Eddy Current 2 Hole Calibration Standard per Customer Supplied Drawing. Material: 7050-T7451. Hole Sizes: .516"Ø and .812"Ø with a total of 4 EDM Notches 0.021" x 0.021" x .004" Wide Max. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3060 | Custom Eddy Current 2 Hole Calibration Standard per Customer Supplied Drawing. Material: 7050-T7451. Hole Sizes: .252"Ø and .516"Ø with a total of 4 EDM Notches 0.021" x 0.021" x .004" Wide Max. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3061AL | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .005", .010", .020" (.004"W +/- .002), 7075-T7 ALUMINUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3071 | Custom designed eddy current multi-layer aircraft aluminum skin test specimen, drawing 2, sheets 1-4. reference standard for Central Piedmont Community College. Material: 2024-T3 Aluminum. Includes Certification Report Traceable to NIST. | 1 | |
| AFNDT-3154CS | Eddy Current Surface Standard Carbon Steel. 0.5mm, 1.0mm,2.0mm Deep x .15mm Wide +/- .05mm. Block Size: 5.0"(127mm)L x 2.0"(50.8mm)W x .25"(6.35mm). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3154SS | Eddy Current Surface Standard 316 Steel. 0.5mm, 1.0mm,2.0mm Deep x .15mm Wide +/- .05mm. Block Size: 5.0"(127mm)L x 2.0"(50.8mm)W x .25"(6.35mm). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3160AL | BOMBARDIER EDDY CURRENT SURFACE REFERENECE STANDARD. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), DEPTH TOLERANCE = +/- .001"(+/- .003mm). MATERIAL 2024-T3 ALUMINUM. SIZE: 1.5"W x 3.75"L x .25". Includes Test Report and Certificate of... | 1 | |
| AFNDT-3160AL-1 | BOMBARDIER EDDY CURRENT SURFACE REFERENECE STANDARD. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), DEPTH TOLERANCE = +/- .001"(+/- .003mm). MATERIAL 6061-T6 ALUMINUM, IACS 40.00-44.80. SIZE: 1.5"W x 3.75"L x .25". Includes Test Report and | 1 | |
| AFNDT-3160AL-2 | BOMBARDIER EDDY CURRENT SURFACE REFERENECE STANDARD. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), DEPTH TOLERANCE = +/- .001"(+/- .003mm). MATERIAL 2024-T6 ALUMINUM, SIZE: 1.5"W x 3.75"L x .25". Includes Test Report and Certificate of ... | 1 | |
| AFNDT-3160CS | BOMBARDIER EDDY CURRENT SURFACE REFERENECE STANDARD. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), DEPTH TOLERANCE = +/- .001"(+/- .003mm). MATERIAL 4130/4340 CRES STEEL. SIZE: 1.5"W x 3.75"L x .25". Includes Test Report and Certificat... | 1 | |
| AFNDT-3160SS | BOMBARDIER EDDY CURRENT SURFACE REFERENECE STANDARD. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), DEPTH TOLERANCE = +/- .001"(+/- .003mm). MATERIAL: 304 STAINLESS STEEL. SIZE: 1.5"W x 3.75"L x .25". Includes Test Report and Certificat... | 1 | |
| AFNDT-3201/321SS | EDDY CURRENT SURFACE REFERENCE STANDARD, 321SS 3 EDM SLOTS (0.2mm, 0.5mm,1.0mm DEEP) x (0.05-0.25mm WIDE). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3224TI | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .005", .010", .020", .040", .060" (.005"W +/- .002, MAX .007"). MATERIAL: 6AL-4v TITANIUM@2.2IACS. SIZE: 1.0"W x 6.0"L x .500". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3231 | Custom McDonnell Douglas Low Frequency Eddy Current reference standard, 06-20-01 Figure 9 sheets 1-4. Material: 2024-T3 or 7075-T6 Aluminum. Fasteners: (NAS1097AD6-5 & BACB30NW6K3). Includes Test Report and Certificate of Confromance. | 1 | |
| AFNDT-3231-1 | Custom McDonnell Douglas Low Frequency Eddy Current reference standard, 06-20-01 Figure 9 sheets 1-4. Material: 2024-T3 or 7075-T6 Aluminum.Fasteners: (CR3223-5 & MS21141-5). Includes Test Report and Certificate of Confromance. | 1 | |
| AFNDT-3233F | Custom Eddy Current Surface Standard. Size: 80mm x 35mm x 7mm. Material: Forged Aluminum. EDM Notch: .060" Long x .004" Wide x .030" Deep +/- 0.002". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3279/15-5PH | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .010", .020", .050" .007" ,MAX WIDTH, 15-5PH STEEL. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3279/Ti | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .010", .020", .050" .007" ,MAX WIDTH, 6AL-4V TITANIUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3284SS | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .005"(0.127mm), .010"(0.254mm), .020"(0.508mm), .050"(1.27mm) (.004"W +/- .001), 304 STAINLESS STEEL. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. REFERENCE P/N:29A049 | 1 | |
| AFNDT-3285/17-4 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .005"(0.127mm), .010"(0.254mm), .020"(0.508mm) (.004"W +/- .002). Material: 17-4PH Steel Condition to TH1050. SIZE: 1.0"W x 3.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3285/17-7 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .005"(0.127mm), .010"(0.254mm), .020"(0.508mm) (.004"W +/- .002). Material: 17-7PH Steel Condition to TH1050. SIZE: 1.0"W x 3.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3285/304 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .005"(0.127mm), .010"(0.254mm), .020"(0.508mm) (.004"W +/- .002). Material: Non-Magnetic 304 Stainless Steel. SIZE: 1.0"W x 3.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3306/2024T3 | EDDY CURRENT SURFACE REFERENCE STANDARD, METRIC NOTCHE SIZES: 0.2mm, 0.5mm &1.0mm. WIDTH = .005" +/- .002" MATERIAL: 2024-T3 ALUMINUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3306/7075T6 | EDDY CURRENT SURFACE REFERENCE STANDARD, METRIC NOTCHE SIZES: 0.2mm, 0.5mm &1.0mm. WIDTH = .005" +/- .002" MATERIAL: 7075-T6 ALUMINUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3306/MAG | EDDY CURRENT METRIC SURFACE REFERENCE STANDARD. EDM NOTCH SIZES: 0.2mm, 0.5mm &1.0mm. WIDTH = .005" +/- .002" MATERIAL: MAGNESIUM ZK60A-T5 PER ASTM-B107. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3315AL | EDDY CURRENT SURFACE REFERENCE STANDARD, 4 EDM NOTCHES .005", .010", .020" and .050" x (.004"W +/- .002). MATERIAL: 7075-T6 ALUMINUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3319SS | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .020"(0.5mm), .040"(1.0mm), .079"(2.0mm) (.005"W +/- .002), 304 STAINLESS STEEL. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3357/2024T4 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008"(0.2mm), .020"(0.5mm), .040"(1.0mm) (.004"W +/- .001), 2024-T4 ALUMINUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance and Material Certification. | 1 | |
| AFNDT-3370/4340 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .010"(0.25mm), .020"(0.5mm), .030"(0.76mm) (.004"W +/- .002), 4340 STEEL. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3370/7075T6 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .010"(0.25mm), .020"(0.5mm), .030"(0.76mm) (.004"W +/- .002), 7075-T6 ALUMINUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3370/TI | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .010"(0.25mm), .020"(0.5mm), .030"(.76mm) (.004"W +/- .002), 6AL-4v TITANIUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3412 | Custom Eddy Current Surface Standard with a Total of 12 EDM Notches. Notch Lenghs of .125, .250", .375" and .625". Notch Depths of .008", .020", and .040" for each length. Material: Nickel Aluminum Bronze. Includes Test Report and Certificate of Conforman | 1 | |
| AFNDT-3413 | Custom Boeing Eddy Current Hole Standard. Hole Sizes: .159 & .190"Ø. With one of each hole size plugged. Material: 2024-T3 Aluminum. Plugged holes contain a BACR15BA6A8C Rivet in the .056" plate. Apply BMS 545 sealant between each layer Includes Test Repo | 1 | |
| AFNDT-3423 | Eddy Current Reference Standard. Dimensions: 4" x 0.25" x 1" Material: Aluminum 7075-T7. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3426 | Custom Eddy Current Hole Standard. Hole Diameters: 4.0 mm, 4.5 mm, 5.0 mm, 5.5 mm, 6.0 mm, 6.5 mm, 7.0 mm, 7.5 mm, 8.0 mm, 8.5 mm, 9.0 mm, 9.5 mm, 10.0 mm, 10.5 mm, 11.0 mm, 11.5 mm, 12.0 mm. Material: Aluminium 7050-T74. Includes Test Report and Certific | 1 | |
| AFNDT-3439/6AL-4V | EDDY CURRENT SUIRFACE STANDARD WITH A TOTAL OF THREE A3 TYPE SURFACE NOTCHES ORIENTATED AT 0°, 45° and 90°. MATERIAL: 6AL-4V TITANIUM. SIZE: 2.0" Wide X 4.0" Wide. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3439/718 | EDDY CURRENT SUIRFACE STANDARD WITH A TOTAL OF THREE A3 TYPE SURFACE NOTCHES ORIENTATED AT 0°, 45° and 90°. MATERIAL: 718 INCONEL SIZE: 2.0" Wide X 4.0" Wide. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3440/304 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .010"(0.254mm), .020"(0.508mm), .050" (1.27mm) (.004"W +/- .001). Material: Non-Magnetic 304 Stainless Steel. SIZE: 1.0"W x 3.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3440/6AL-4V | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .010"(0.254mm), .020"(0.508mm), .050" (1.27mm) (.004"W +/- .001). Material: 6AL-4V Titanium. SIZE: 1.0"W x 3.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3459AL | Calibration standard, Aluminium alloy 2024-T3, rotary (dynamic) eddy current testing, cross-drilled hole type per BAe 146 Ref. NTM Part 6,20-00-00), for diameters of (5/16 in. (7.94 mm), 13/16 in. (20.64 mm), 7/8 in. (22.23 mm), 1.1/16 in. (26.99 mm), 1. | 1 | |
| AFNDT-3459TI | Calibration standard, 6Al-4v Titanium , rotary (dynamic) eddy current testing, cross-drilled hole type per BAe 146 Ref. NTM Part 6,20-00-00), for diameters of (5/16 in. (7.94 mm), 13/16 in. (20.64 mm), 7/8 in. (22.23 mm), 1.1/16 in. (26.99 mm), 1.1/8 in | 1 | |
| AFNDT-3484AL | Eddy Current Bolt Hole Calibration standard, 5 Hole Sizes. Material: 7075-T6 Aluminium, Hole diameters: .750", .875",1.00" 1.125" 1.187", .030" x .030" x .005" ± .001" Corner EDM Notch in each hole. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3485AL | Eddy Current Bolt Hole Calibration standard, 3 Hole Sizes. Material: 7075-T6 Aluminium, Hole diameters: 1.250" 1.375", 1.500", .030" x .030" x .005" ± .001" Corner EDM Notch in each hole. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3512AL | MISTRAS 3 HOLE EDDY CURRENT TEST STANDARD, HOLE SIZES: .250", .375", .500" DIAMETERS, EDM CORNER NOTCH: .025" x .025" x .005 ± .002", MID-WALL NOTCH:.080" x .025" DEEP +/-.002" per BSS7048. 1 SURFACE EDM NOTCH .150" LONG x .030" DEEP. ALL NOTCHES TO B... | 1 | |
| AFNDT-3522AL | CUSTOM EDDY CURRENT SURFACE REFERENCE STANDARD, 3 EDM SLOTS .008",.020",.040" .006" ±.001". MATERIAL: 7075-T6 ALUMINUM. SIZE: .312" THICK x 1.375 WIDE x 3.156". Includes Test Report and Certifictate of Conformance. | 1 | |
| AFNDT-3522SS | CUSTOM EDDY CURRENT SURFACE REFERENCE STANDARD, 3 EDM SLOTS .008",.020",.040" .006" ±.001". MATERIAL: 304 STAINLESS STEEL. SIZE: .312" THICK x 1.375 WIDE x 3.156". Includes Test Report and Certifictate of Conformance. | 1 | |
| AFNDT-3522ST | CUSTOM EDDY CURRENT SURFACE REFERENCE STANDARD, 3 EDM SLOTS .008",.020",.040" .006" ±.001". MATERIAL: 4340 STEEL. SIZE: .312" THICK x 1.375 WIDE x 3.156". Includes Test Report and Certifictate of Conformance. | 1 | |
| AFNDT-3534/2024T3 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .010"(0.254mm), .020"(0.5mm), .030"(.762mm) (.004"W +/- .002), 2024-T3 ALUMINUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3541AL | EDDY CURRENT SURFACE STANDARD MANUFACTURED TO BSS 7698,..3 EDM NOTCHES: ( .010", .020", .030" Deep x .005" Wide ± .001 ), MATERIAL: 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3541ST | EDDY CURRENT SURFACE STANDARD MANUFACTURED TO BSS 7698,.. 3 EDM NOTCHES: ( .010", .020", .030" Deep x .005" Wide ± .001 ), MATERIAL: 4340 Steel. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3541TI | EDDY CURRENT SURFACE STANDARD MANUFACTURED TO BSS 7698, ..3 EDM NOTCHES: ( .010", .020", .030" Deep x .005" Wide ± .001 ), MATERIAL: 6AL-4V Titanium. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3546AL | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHE SIZES: .005"(.127mm) , .020"(0.5mm), .050"(1.27mm) (.005"W +/- .001). MATERIAL: 7075-T6 ALUMINUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-PR-T-2521/22 | CUSTOM EDDY CURRENT SURFACE CALIBRATION BLOCK. PER CUSTOMER SUPPLIED DRAWING. MATERIAL: 7075-T6 Aluminum. EDM Notch size 1mm (.040') , .76mm(.030"), .2mm(.008") deep x .1mm(.004") wide +/- .002". Includes Test Report and Certificate of Conformance. | 1 | |
| AGE-02001-401 | REFERENCE STANDARD, GENERAL EDDY CURRENT TESTING, ALUMINUM ALLOY | 1 | |
| AGE-04383-001 | STANDARDS SET - REFERENCE, NDI – GENERAL EDDY CURRENT TEST | 1 | |
| AGE-04707-401 | SET - REFERENCE STANDARD NDI - GENERALEDDY CURRENT TEST | 2 | |
| AL29-32 | EDDY CURRENT HFEC CALIBRATION TEST BLOCK | 6 | |
| AL35-45 | EDDY CURRENT HFEC CALIBRATION TEST BLOCK | 8 | |
| APN-95-2C/1M | Eddy Current Surface Probe 90° degrees, 0.500 inch (12.70 mm) drop curve, 2.0 inch (152 mm)long,1MHz-2MHZ supplied with a Microdot Connector. Includes Test Report and Certificate of Conformance. | 1 | |
| APN-95-3C | Eddy Current Rigid Surface Probe 50-500KHz with a 200KHz Center Frequency, 90° degrees, 0.500 inch (12.70 mm) drop curved, 3.0 inch (152 mm) long supplied with a Microdot Connector. Includes Test Report and Certificate of Conformance. | 1 | |
| APN-95-5C | Eddy Current Rigid Surface Probe 50-500KHz with a 200KHz Center Frequency, 90° degrees, 0.500 inch (12.70 mm) drop curved, 5.0 inch (127 mm) long supplied with a Microdot Connector. Includes Test Report and Certificate of Conformance. | 1 | |
| APN-95-6C/1M | Eddy Current Surface Probe 90° degrees, 0.500 inch (12.70 mm) drop curve, 6.0 inch (152 mm)long, 500kHz-2MHZ with Microdot Connector. Includes Test Report and Certificate of Conformance. | 1 | |
| APN-95-6C/200K | Eddy Current Surface Probe 90° degrees, 0.500 inch (12.70 mm) drop curve, 6.0 inch (152 mm)long, 100-500 kHz with a center frequency of 200KHz. Supplied with a 7 Pin Lemo Connector. Includes Test Report and Certificate of Conformance | 1 | |
| ARS-123/TI | EDDY CURRENT SURFACE REFERENCE STANDARD. MATERIAL: TI-6AL-6V-2SN. SIZE: 2.0" LONG x 1.0" WIDE. EDM NOTCH .040" DEEP +/- .002" x .005" WIDE +/- .001". Includes Test Report and Certificate of Conformance. | 1 | |
| B1 | EDDY CURRENT EQUIPMENT ELOTEST | 6 | |
| B1 BSM | NDT Eddy Current Tester | 1 | |
| B1-V4UM-KIT | TEST SET EDDY CURRENT | 1 | |
| B1V4UM | EDDY CURRENT TEST SET | 1 | |
| B2 | ELOTEST, B1, SD OR SDM,(EDDY CURRENT EQUIPMENT) | 6 | |
| B300 | EDDY CURRENT EQUIPMENT ELOTEST | 1 | |
| B300ECE | B300 EDDY CURRENT EQUIPMENT - ELOTEST | 1 | |
| B310 | EDDY CURRENT TEST SET | 1 | |
| BH7475 – T7351 | EDDY CURRENT ROTO CALIBRATION TEST BLOCK | 4 | |
| CFM56 9970-958-579 | EDDY CURRENT SURFACE REFERENCE BLOCK. 2 EDM NOTCHES .012" Deep x .004" Wide and .020" Deep x .004" Wide. Tolerance on Width (.004" W +/- .002"), Material: Inconel 600 Series. Reference: CFM56-5B S/B 72-0620 PAGE 14. Includes Test Report and Certificate | 2 | |
| DAC ETOH-AL-1/2 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 1/2 (0.500) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-1/4 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 1/4 (0.250) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-1/8 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 1/8 (0.125) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-11/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 11/16 (0.6875) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-3/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 3/16 (0.1875) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-3/4 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 3/4 (0.750) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-3/8 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 3/8 (0.375) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-5/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 5/16 (0.3125) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-5/8 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 5/8 (0.625) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-7/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 7/16 (0.4375) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-9/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 9/16 (0.5625) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-1/2 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 1/2 (0.500) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-1/4 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 1/4 (0.250) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-1/8 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 1/8 (0.125) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-11/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 11/16 (0.6875) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-3/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 3/16 (0.1875) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-3/4 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 3/4 (0.750) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-3/8 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 3/8 (0.375) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-5/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 5/16 (0.3125) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-5/8 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 5/8 (0.625) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-7/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 7/16 (0.4375) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-9/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 9/16 (0.5625) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-1/2 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 1/2 (0.500) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-1/4 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 1/4 (0.250) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-1/8 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 1/8 (0.125) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-11/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 11/16 (0.6875) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-3/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 3/16 (0.1875) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-3/4 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 3/4 (0.750) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-3/8 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 3/8 (0.375) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-5/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 5/16 (0.3125) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-5/8 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 5/8 (0.625) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-7/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 7/16 (0.4375) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-9/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 9/16 (0.5625) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| ECM2.837 | TESTER, EDDY CURRENT | 1 | |
| ECM2.841 | TESTER - EDDY CURRENT | 1 | |
| ED-100 | Impedance Plane Flaw Detector / Eddy Current Tester | 1 | |
| ED-520 | TESTER - EDDY CURRENT | 1 | |
| ED-520ME | TESTER - EDDY CURRENT | 2 | |
| ED-530 | TESTER - EDDY CURRENT | 1 | |
| ED520 | EDDY CURRENT TESTER | 1 | |
| EL0TEST-M2 | EDDY CURRENT TESTER 10 HZ-12MHZ | 3 | |
| ELO TEST B1.3 SDM VERSION 2.04 | EDDY CURRENT METHOD INSPECTION TESTER | 1 | |
| ELOTEST B1 | NDT Eddy Current Tester - Elotest B1 | 1 | |
| ELOTEST B1V4 | TEST INSTRUMENT - EDDY CURRENT | 1 | |
| ELOTEST B310 | PORTABLE UNIVERSAL EDDY CURRENT TEST SET | 1 | |
| ELOTEST M2 V3 | EDDY CURRENT TEST INSTRUMENT | 3 | |
| ELOTEST M3-D | EDDY CURRENT EQUIPMENT ELOTEST | 2 | |
| ELOTEST M3-S | ELOTEST EDDY CURRENT EQUIPMENT (TESTER) | 1 | |
| ELOTEST-B310 | Portable Universal Eddy Current Test Set | 1 | |
| ELOTEST-M3-D | ELOTEST EDDY CURRENT EQUIPMENT (TESTER) | 2 | |
| ELOTEST-M3D | TEST INSTRUMENT - EDDY CURRENT | 2 | |
| ELOTESTB1-V4 | eddy current test set | 1 | |
| ELOTESTM2-V3 | eddy current test instrument | 3 | |
| ELOTESTM2V3 | EDDY CURRENT TESTER | 3 | |
| ELOTESTM3 | EDDY CURRENT EQUIPMENT ELOTEST M3 | 1 | |
| ELOWHEEL-1000 | TESTING SYSTEM,EDDY CURRENT INSPECTION | 1 | |
| F60.0101 | EDDY CURRENT EQUIPMENT ELOTEST | 1 | |
| F60.0110 | EDDY CURRENT TEST INSTRUMENT | 1 | |
| FC-2001 | EDDY CURRENT TESTER | 1 | |
| HALECEDDYCURRENTTEST | HALEC EDDY CURRENT TESTER | 1 | |
| HEC-101 | EDDY CURRENT ELECTRICAL CONDUCTIVITY TESTER | 1 | |
| HU80979 | EDDY CURRENT TEST PEICE | 1 | |
| HY80979 | EDDY CURRENT TEST PIECE | 1 | |
| Honeywell ET Standard | Honeywell Eddy Current Wheel Surface Standard. Material:2024-T6 Forged Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| IAER001 | EDDY CURRENT TEST EQUIPMENT | 1 | |
| IETH001 | EDDY CURRENT FLAW DETECTOR & BOND TESTER | 1 | |
| KISIG001B-NIST | EDDY CURRENT TESTER KIT | 1 | |
| M2 | EDDY CURRENT EQUIPMENT ELOTEST | 4 | |
| M2V3-D | EDDY CURRENT EQUIPMENT ELOTEST | 1 | |
| M3 | EDDY CURRENT EQUIPMENT ELOTEST | 4 | |
| M3-D-16 | PORTABLE EDDY CURRENT TEST | 1 | |
| MIZ-10B | EDDY CURRENT TESTER | 1 | |
| MIZ-20A | Eddy current tester | 2 | |
| MIZ-21A | EDDY CURRENT TESTER | 2 | |
| MIZ-21B | EDDY CURRENT TESTER | 2 | |
| MIZ-21C | EDDY CURRENT TESTER | 1 | |
| MIZ-21SR | EDDY CURRENT BOND TESTER | 1 | |
| MIZ-22 | Eddy Current Tester | 1 | |
| MIZ10B | TESTER - EDDY CURRENT (COM-1564) | 1 | |
| MIZ21C | EDDY CURRENT TESTER WITH CHARGER | 1 | |
| NORTEC 2000D | TEST INSTRUMENT - EDDY CURRENT | 2 | |
| NORTEC 2000I | Eddy Current Tester | 1 | |
| NORTEC 500 | TEST INSTRUMENT - EDDY CURRENT | 1 | |
| NORTEC 500D | TEST INSTRUMENT - EDDY CURRENT | 1 | |
| NORTEC 600 | EDDY CURRENT TEST SET (OLYMPUS NORTEC 600) | 2 | |
| NORTEC 600C | TEST INSTRUMENT - EDDY CURRENT | 1 | |
| NORTEC 600D | PORTABLE EDDY CURRENT TESTER – IMPEDANCE PLANE TYPE | 3 | |
| NORTEC-600 | TEST INSTRUMENT - EDDY CURRENT | 2 | |
| NORTEC-600D | EDDY CURRENT TEST SET | 3 | |
| NORTEC-600S | EDDY CURRENT TESTER | 1 | |
| NORTEC600 | EDDY CURRENT TEST KIT | 2 | |
| NORTEC600D | TEST INSTRUMENT - EDDY CURRENT | 3 | |
| NORTEC 600D | EDDY CURRENT TEST SET | 3 | |
| NORTED 600D | EDDY CURRENT TESTER | 1 | |
| PABM90C605 | PROBE, EDDY CURRENT TESTING | 1 | |
| PL600 | EDDY CURRENT EQUIPMENT ELOTEST | 1 | |
| PWA84314 | REFERENCE STANDARD FOR EDDY CURRENT TEST ON PW2000 SERIES ENGINE FAN BLADES | 1 | |
| Q0300015 | EDDY CURRENT TESTER | 1 | |
| REDDY-32M | EDDY CURRENT TEST SET WITH PROBES | 1 | |
| SO111-7 | Custom FOKKER F28 Horizontal Stab. Drive Junction Fitting Eddy Current Standard per drawing # 28. 0-3210/2610-Material: 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| SPO2172 | PROBE - NORTEC EDDY CURRENT TEST | 1 | |
| SRSM-2510T | REFERENCE STANDARD, GENERAL EDDY CURRENT TESTING, TITANIUM ALLOY | 1 | |
| TESTEREDDYCURRENT | EDDY CURRENT TESTER | 1 | |
| UR.750SE | EDDY CURRENT TESTER SPARES: PROBE UNIVERSAL ROTARY | 1 | |
| UR_750SE | EDDY CURRENT TESTER SPARES: PROBE UNIVERSAL R | 1 | |
| ZES-HHT-MIZ-21C-DF | EDDY CURRENT TESTER | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
