| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 18316G-02 | EAR SEAL | 16 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 6799622 | PULLER, REAR TURBINE BEARING AND SEAL (CALIBRATION) | 1 | |
| 109-3130-78-101 | TOOL KIT, 90° GEARBOX DRIVE SEAL REMOVAL/INSTALLATION | 1 | |
| 109-3130-80-101 | TOOL SET, 90° GEARBOX CASE CONE ASSY SEAL AND SEAL CARRIER REMOVAL/INSTALLATION - LIGA METALICA | 1 | |
| 109-3400-95-1 | 90 ̊ GEARBOX OUTPUT SEAL | 1 | |
| 1091451-100 | SEALS KIT, REAR CYLINDER NBL. FOR BELT LOADER | 1 | |
| 10C1096P01 | PROTECTOR - NO. 4 BEARING OIL SEAL (BEARING OIL SEAL PROTECTOR) | 1 | |
| 10C1350G01 | PULLER, SEAL- HPT REAR ROTATING SEAL | 1 | |
| 10C1400 | GAGE - NO 4 BEARING TO FWD ROTATING OIL SEAL | 1 | |
| 10C1400P01 | GAGE, NO. 4 BEARING TO FORWARD, ROTATING OIL SEAL, | 1 | |
| 1100-15 | BEARING SEAL RETAINING RING INSTALLATION TOOL | 5 | |
| 114E5803-1 | PUSHER ASSEMBLY, BEARING AND SEAL | 1 | |
| 11A72-11243 | GEARBOX CARBON SEAL REMOVAL | 1 | |
| 11C3166G04 | Fixture install remove seal rotating no 1 bearing | 1 | |
| 11C3254 | SEATING - TOOL-SEAL - ROTATING - NO 3 BEARING | 1 | |
| 11C3254G01 | Seating,Tool-Seal,Rotating,NO 3 Bearing | 1 | |
| 11C3316G02 | Puller-No 3 Bearing, Rotating Seal | 1 | |
| 11C3381 | GUIDE-CARBON SEAL - NO. 1 BEARING | 1 | |
| 11C3381G01 | Guide-carbon seal,No.1 bearing | 1 | |
| 11C3474 | GUIDE - INSTALLTION NO 5 BEARING CARBON SEAL | 1 | |
| 11C3505 | PULLER - NO. 5 BEARING INNER RACE/SEAL | 1 | |
| 11C4122G02 | NO. 3 BEARING CARBON SEAL FLOW CHECK TOOL | 1 | |
| 11C4211G01 | Fixture,restraining-no 1 bearing stationary seal | 1 | |
| 11C4214G01 | Fixture,restraining-no 5 bearing seal hsg | 1 | |
| 11C4215G01 | Fixture,restraining-seal,rotating,air,No 4 bearing | 1 | |
| 11C4223G01 | Fixture,restraining-seal stationary.no 3 bearing | 1 | |
| 11C4227G01 | Fixture,restraining-drain seal,shroud rear no.3 bearing | 1 | |
| 11C4229G01 | Fixture,restraining-seal rotating oil rear no 3 bearing | 1 | |
| 11C4232 | FIXTURE - RESTRAINING-SEAL - STATIONARY INNER FWD NO 5 BEARING | 1 | |
| 11C4232G01 | Fixture,restraining-seal,stationary inner fwd,No 5 bearing | 1 | |
| 1319M25P02 | HPC REAR AIR SEAL | 1 | |
| 1523M35P01 | HPC CDP ROTATING REAR AIR SEAL | 1 | |
| 18316G-02 | EAR SEAL-FOAM | 16 | |
| 18316G02 | EARSEALS | 16 | |
| 18682G-02 | EAR SEAL LIQUID PAIR | 1 | |
| 18C1506 | PUSHER - NO. 1 & 2 BEARINGS & NO. 1 ROTATING SEAL | 1 | |
| 18D10647 | ACCESSORY GEARBOX PULLER SEAL MATING RING | 1 | |
| 190-26424-901 | BRUSH SEALING- REAR | 1 | |
| 19C0628G01 | Fixture Install-Aft Seals Inner Race&Oil Scoop No 4 Bearing | 1 | |
| 19C0637G01 | Fixture Install-Aft Seal No.4 Bearing Housing | 1 | |
| 1C5678 | ADAPTER, PULLER - SEAL, NO. 6R BEARING | 1 | |
| 1C5691 | PULLER NO 6 BEARING INR RING & ROTATING OIL SEAL | 1 | |
| 1C5691 REV P | PULLER NO. 6 BEARING INNER RING & ROTATING OIL SEAL | 1 | |
| 1C5691G04 | Puller, No. 6R Bearing Inner Race and Rotating Oil Seal | 1 | |
| 1C5702 | PUSHER- NO 6 BEARING AND SEAL RACE | 1 | |
| 1C5702G01 | PUSHER, NO. 6R BEARING AND SEAL RACE | 1 | |
| 1C6800 | PUSHER, ROTATING SEALS-O/S TRANSDUCER GEAR & BRG R | 1 | |
| 1C6800 REV T | PUSHER, ROTATING SEALS-O/S TRANSDUCER GEAR & BRG RACES- | 1 | |
| 1C6800G03 | Pusher,rotating seals-o/s transducer gear&brgraces lp turb rtr | 1 | |
| 1C6800G04 | Pusher,rotating seals-o/s transducer gear&brgraces lp turb rtr | 1 | |
| 1C6801 | PULLER, ROTATING SEALS & BEARING RACES-AFT SHAFT | 1 | |
| 1C6898G01 | PINS GUIDE - BEARING/SEAL INSTALLATION | 1 | |
| 1C8182G01 | SET FOR MATING SEAL REMOVAL GEARBOX | 1 | |
| 1C9150 | TOOL SET, JACK SCREWS-ENGINE BEARINGS & SEALS | 1 | |
| 1C9150G02 | Tool Set, Jack Screwsengine Bearings & Seals | 1 | |
| 2024821-1 | FIXTURE TEST, BEARING SEAL | 1 | |
| 21261 | SHEAR SEAL | 2 | |
| 21C6068G01 | PULLER BEARING & SEAL | 1 | |
| 21C7044G01 | SEAL RUNNER AND NO. 1 BEARING INNER RACE HYDRAULIC PULLER | 1 | |
| 21C7877G01 | ACCESSORY GEARBOX PULLER SEAL MATING RING | 1 | |
| 220307 | PPG Semco 220307 Clear Plastic Low Density 1 oz Disposable Sealant Cartridge Only | 1 | |
| 220315 | PPG Semco 220315 Clear Plastic Low Density 2.5 oz Disposable Sealant Cartridge Only | 1 | |
| 220316 | PPG Semco 220316 Clear Plastic High Density 2.5 oz Disposable Sealant Cartridge Only | 2 | |
| 220317 | PPG Semco 220317 Clear Plastic Low Density 6 oz Disposable Sealant Cartridge Only | 1 | |
| 220318 | PPG Semco 220318 Clear Plastic High Density 6 oz Disposable Sealant Cartridge Only | 5 | |
| 220319 | PPG Semco 220319 Clear Plastic Low Density 8 oz Disposable Sealant Cartridge Only | 2 | |
| 220320 | PPG Semco 220320 Clear Plastic High Density 8 oz Disposable Sealant Cartridge Only | 3 | |
| 220321 | PPG Semco 220321 Clear Plastic Low Density 12 oz Disposable Sealant Cartridge Only | 1 | |
| 220322 | PPG Semco 220322 Clear Plastic High Density 12 oz Disposable Sealant Cartridge Only | 3 | |
| 220323 | PPG Semco 220323 Clear Plastic Low Density 2.5 oz CP Plunger Disposable Sealant Cartridge | 3 | |
| 220324 | PPG Semco 220324 Clear Plastic High Density 2.5 oz CP Plunger Disposable Sealant Cartridge | 1 | |
| 220325 | PPG Semco 220325 Clear Plastic Low Density 6 oz CP Plunger Disposable Sealant Cartridge | 2 | |
| 220326 | PPG Semco 220326 Clear Plastic High Density 6 oz CP Plunger Disposable Sealant Cartridge | 2 | |
| 220327 | PPG Semco 220327 Clear Plastic Low Density 8 oz CP Plunger Disposable Sealant Cartridge | 1 | |
| 220328 | PPG Semco 220328 Clear Plastic High Density 8 oz CP Plunger Disposable Sealant Cartridge | 1 | |
| 220329 | PPG Semco 220329 Clear Plastic Low Density 12 oz CP Plunger Disposable Sealant Cartridge | 1 | |
| 220330 | PPG Semco 220330 Clear Plastic High Density 12 oz CP Plunger Disposable Sealant Cartridge | 2 | |
| 220331 | PPG Semco 220331 Clear Plastic Low Density 2.5 oz CWP Plunger Disposable Sealant Cartridge | 1 | |
| 220332 | PPG Semco 230332 Clear Plastic High Density 2.5 oz CWP Plunger Disposable Sealant Cartridge | 1 | |
| 220333 | PPG Semco 220333 Clear Plastic Low Density 6 oz CWP Plunger Disposable Sealant Cartridge | 2 | |
| 220334 | PPG Semco 230334 Clear Plastic High Density 6 oz CWP Plunger Disposable Sealant Cartridge | 1 | |
| 220335 | PPG Semco 220335 Clear Plastic Low Density 8 oz CWP Plunger Disposable Sealant Cartridge | 1 | |
| 220336 | PPG Semco 220336 Clear Plastic High Density 8 oz CWP Plunger Disposable Sealant Cartridge | 1 | |
| 220337 | PPG Semco 220337 Clear Plastic Low Density 12 oz CWP Plunger Disposable Sealant Cartridge | 1 | |
| 220338 | PPG Semco 230338 Clear Plastic High Density 12 oz CWP Plunger Disposable Sealant Cartridge | 1 | |
| 22658G - 01 | COMFORT COVER EAR SEAL | 9 | |
| 22658G01 | EAR SEAL 8130-3 EXEMPT | 9 | |
| 229689 | PPG Semco 229689 Clear Plastic High Density 110 Gallon Disposable Sealant Cartridge Only | 2 | |
| 229734 | PPG Semco 229734 Clear Plastic High Density 20 oz Disposable Sealant Cartridge Only | 1 | |
| 230231 | PPG Semco 230231 Clear Plastic High Density 20 oz CWP Plunger Disposable Sealant Cartridge | 1 | |
| 230268 | PPG Semco 230268 Clear Plastic High Density 110 Gallon CWP Plunger Disposable Sealant Cartridge | 1 | |
| 230285 | PPG Semco 230285 Clear Plastic Low Density 110 Gallon Disposable Sealant Cartridge Only | 1 | |
| 231718 | PPG Semco 231718 Clear Plastic 1 x 1-38 L x 78 Orifice Funnel Sealant Gun Nozzle | 1 | |
| 232375 | PPG Semco 232375 Clear Plastic Low Density 1 oz CWP Plunger Disposable Sealant Cartridge | 1 | |
| 232917 | PPG Semco 232917 Clear Plastic High Density 32 oz Disposable Sealant Cartridge Only | 1 | |
| 232921 | PPG Semco 232921 Clear Plastic Low Density 32 oz Disposable Sealant Cartridge Only | 1 | |
| 233222 | PPG Semco 233222 Clear Plastic High Density 1 oz Disposable Sealant Cartridge Only | 1 | |
| 473015 | REPLACEMENT HOSES TOOL NO. 473015 THIS KIT CONTAINS ALL HYDRAULIC SEALS CAPABLE OF REBUILDING ONE HYDRAULIC JACK OF THE AA293268 CYLINDER HEAD/MAIN BEARING HYDRAULIC FIXTURE. | 1 | |
| 716180 | Assembly of Sealing Ring on Bearing | 1 | |
| 726691 | BEARING CYLINDER SEALS INSTALLATION SET | 1 | |
| 728031 | BEARING SEAL INSTALLATION | 1 | |
| 831630 | Fixture, Flush, No. 2 Bearing Seal Retainer | 1 | |
| 6796169 | GUIDE PIN - COMPRESSOR REAR SEAL AND BEARING | 2 | |
| 6796179 | DRIFT - PINION REAR BRG SEAL REMOVAL | 1 | |
| 6796190 | DRIVER - COMPRESSOR REAR BEARING AND SEAL | 2 | |
| 6796299 | PROTECTOR - PINION GEAR SEAL | 1 | |
| 6796354 | EXPANDER - TACHOMETER DRIVE SHAFT GEAR OIL SEAL | 2 | |
| 6796541 | KIT REPLACEMENT ACCESSORY GEARBOX OIL SEAL | 2 | |
| 6796651 | EXPANDER - PROPELLER SHAFT THRUST BEARING SEAL | 2 | |
| 6796654 | PULLER - TURBINE FRONT BEARING LABYRINTH SEAL | 2 | |
| 6796941 | RRM250- C20 Accessory GearboxSeal Kit | 4 | |
| 6796952 | Puller â Forward Bearing & Seal, Compressor | 2 | |
| 6796971 | PULLER, BEARING AND SEALS, FRONT COMPRESSOR LABYRINTH | 3 | |
| 6797023 | GUIDE - TURB REARBRG SEAL RING | 1 | |
| 6797127 | DRIVER - TURB REAR BRG SEAL SPACER | 1 | |
| 6797386 | EXPANDER, PROPELLER SHAFT THRUST BEARING SEAL | 1 | |
| 6797708 | PULLER, COMPRESSOR REAR BEARING & DOUBLE LABYRINTH SEAL | 2 | |
| 6799518 | PULLER—GAS PRODUCER BALL BEARING LABYRINTH SEAL ASSEMBLY | 1 | |
| 6799596 | SHAFT GEAR OIL SEAL FIXTURE - INSTALLATION, SPEED | 2 | |
| 6799622 | Puller, Rear Turbine Bearing and Seal | 2 | |
| 6799624 | PULLER - TURBINE FRONT BEARING LABYRINTH SEAL | 2 | |
| 6799902 | PULLER - TURBINE FRONT BEARING LABYRINTH SEAL | 1 | |
| 6872199 | PULLER - SEAL, FRONT REDUCTION GEAR BOX | 1 | |
| 6872200 | DRIFT - SEAL, FRONT REDUCTION GEAR BOX ASSY | 1 | |
| 6893735 | DRIFT--COMPRESSOR REAR LABYRINTH ROTATING SEAL | 1 | |
| 6893739 | PULLER--COMPRESSOR REAR BEARING, OIL SLINGER AND SEAL | 2 | |
| 23005023 | PULLER-FORWARD BEARING AND SEAL FOLLOWER | 3 | |
| 23006768 | DRIFT----REDUCTION GEARBOX FRONT SEAL | 2 | |
| 23033027 | PULLER BEARING AND MATTING SEAL RACE COMPRESSOR FRONT | 2 | |
| 23033030 | DRIFT--INSTALLATION, COMPRESSOR FRONT BEARING INNER RACE AND SEAL | 1 | |
| 23033033 | DRIFT--GUIDED, COMPRESSOR FRONT BEARING RING SEAL | 1 | |
| 23033035 | PULLER--COMPRESSOR FRONT BEARING RING SEAL | 1 | |
| 23053554 | Wrench – Power Turbine Aft Bearing And Seal Nut | 1 | |
| 23053599 | Puller - Compressor, Rear Brush Seal | 1 | |
| 23054807 | Pusher – Seal Runner Spacer & Bearing Fan Shaft | 3 | |
| 23054808 | Holder – Pusher, Seal Runner – Spacer and Bearing, Fan Shaft | 3 | |
| 23054809 | Plate – Puller, Seal Runner, Spacer & Bearing Fan Shaft | 2 | |
| 23055344 | PULLER, TURBINE REAR BEARING & SEAL | 1 | |
| 23055732 | PULLER PTO REAR SEAL SPACER | 1 | |
| 23058409 | REAR PTO SEAL & SPACER PULLER | 1 | |
| 23058410 | WRENCH, POWER TURBINE AFT BEARING AND SEAL NUT | 1 | |
| 23058421 | Lift – Power Turbine Aft Bearing Support Seal No. 7 Install | 1 | |
| 23060642 | Puller – Rear Center Sump Seal | 1 | |
| 23060772 | Fixture – Grinding, Rear Stationary Seal | 1 | |
| 23060773 | Mask – Spray, Center Sump Rear Air Seal | 1 | |
| 23060774 | Fixture – Grinding, Air Seal, Rear Center Sump | 1 | |
| 23063508 | Pusher – Brush Seal, Rear Compressor | 1 | |
| 23063520 | Fixture – Holding, Rear Stationary Seal | 1 | |
| 23068488 | Fixture – Grinding, Air Seal, Rear Compressor | 1 | |
| 23068491 | Mask – Spray, Air Seal, Rear Compressor | 1 | |
| 23089389 | BEARING SEAL HOLDER | 2 | |
| 23090722 | GAGE, ACCESSORY-GEARBOX MAGNETIC-SEAL RETAINING RING | 1 | |
| 0308500210 | SEAL, REAR BEARING | 1 | |
| 2370-T190-401 | INSTALLATION DEVICE GSE, NOSE LANDING GEAR SEAL | 4 | |
| 2370‐T190‐401 | Installation Device Gse,Nose Landing Gear Seal | 4 | |
| 2464M88P01 | SEAL, ROTATING, AIR AND OIL, NO. 4 BEARING, FORWAR | 1 | |
| 284476-3-1 | MECHANICAL PULLER ASSEMBLY (REAR COUPLING PULLER) (REMOVES REAR COUPLING SEAL FROM TIE SHAFT) | 1 | |
| 287647-1 | PULLER SEAL BEARING ROTOR | 1 | |
| 291354-1 | DRIVER SET BEARING SEAL | 1 | |
| 294892-1 | DRIVEN COMPRESSOR BEARING PULLER (REMOVES 3822099-1 BEARING AND 3826125-1 SEAL CARRIER FROM 3822075-2 MAIN SHAFT) | 1 | |
| 2956A0000-01 | TOOL, LDG GEAR SEAL INSTALL(GSE353)E190 | 3 | |
| 296977-1 | PILOT ASSEMBLY, SEAL AND BEARING, NUCLEUS | 1 | |
| 2C 14094G06 | FIXTURE, SEAL CHECK NO. 4 BEARING AND SEAL | 1 | |
| 2C14094 | FIXTURE, SEATCHECK-NO. 4B BEARING & SEAL | 1 | |
| 2C14094 REV Y | FIXTURE, SEATCHECK-NO. 4B BEARING & SEAL | 1 | |
| 2C14094G05 | FIXTURE, SEATING CHECK ‐ NO. 4B BEARING AND SEAL | 1 | |
| 2C14094G06 | FIXTURE, SEATING #4 BEARING & SEAL | 1 | |
| 2C14124 | FIXTURE, SEAL/PRESSURIZE ACCESS. GEARBOX | 1 | |
| 2C14124 REV D | FIXTURE, SEAL/PRESSURIZE ACCESS. GEARBOX | 1 | |
| 2C14124G02 | FIXTURE, SEALPRESSURE-ACCESSORY GEAR BOX | 6 | |
| 2C14137 | TOOL, INSTL. ACCESS GEARBOX MATING RING SEAL | 2 | |
| 2C14137 REV A | TOOL, INSTL. ACCESS GEARBOX MATING RING SEAL | 1 | |
| 2C14137G01 | TOOL,INTALLATION-ACC GEARBOX MATING RING SEAL | 10 | |
| 2C14137G02 | TOOL, INSTALLATION - ACCESSORY GEARBOX MATING RING SEAL | 8 | |
| 2C14137G03 | TOOL,INTALLATION-ACC GEARBOX MATING RING SEAL | 1 | |
| 2C14137G04 | TOOL,INTALLATION-ACC GEARBOX MATING RING SEAL | 1 | |
| 2C14138 | FIXTURE, REMVL-MATING SEAL RINGS - ACCESS GEARBOX | 1 | |
| 2C14138 REV B | FIXTURE, REMOVAL-MATING SEAL RINGS - ACCESS. GEARBOX | 1 | |
| 2C14138G01 | REMOVAL - MATING SEAL RING -ACCESSORY GEARBOX | 11 | |
| 2C14138G02 | REMOVAL - MATING SEAL RING -ACCESSORY GEARBOX | 14 | |
| 2C14138G03 | REMOVAL - MATING SEAL RING -ACCESSORY GEARBOX | 1 | |
| 2C14138G04 | REMOVAL - MATING SEAL RING -ACCESSORY GEARBOX | 1 | |
| 2C14221G01 | GAGE SET, CLEARANCE, CRF/CDP STATIONRY AIR SEAL | 1 | |
| 2C14222G01 | STAND, INSTALL/REMOVE - HPT TURBINE ROTOR SHAFT SEALS AND BEARING RACES | 4 | |
| 2C14229G02 | COMPRESSOR REAR FRAME AFT SEALS | 1 | |
| 2C14610G01 | PUSHER-NO 6 BEARINGS INNER RACE AND SEAL | 1 | |
| 2C14618G02 | PULLER, SUMP CLOSURE AND SEAL STATIONARY NO.4R&5R BEARINGS | 3 | |
| 2C14637G01TK | WRENCH, SPANNER NO.2 BEARING NUT, SEAL, GEAR | 1 | |
| 2C14637G02 | Wrench, spanner -no 2 brg nut, seal, gear | 1 | |
| 2C14646G01 | PULLER,#6 BEARING INNER RACE AND SEAL | 3 | |
| 2C14648G01 | PULLER , NO.1 BEARING AND AIR/OIL SEAL | 2 | |
| 2C14648P02 | PULLER #1 BEARING AND AIR-OIL SEAL | 1 | |
| 2C14648P03 | PULLER # 1 BEARING AND AIR-OIL SEAL | 1 | |
| 2C14648P05 | PULLER # 1 BEARING AND AIR-OIL SEAL | 1 | |
| 2C14648P06 | PULLER # 1 BEARING AND AIR-OIL SEAL | 1 | |
| 2C14656G02 | GAGE, CONCENTRICITY - NO. 6 BEARING AND SEALS | 3 | |
| 2C14669G01 | PULLER, NO. 4R BEARING INNER RACE, ROTATING AIR, OIL SEAL, AND NO. 4B BEARING | 3 | |
| 2C14669G02 | PULLER, NO. 4R BEARING INNER RACE, ROTATING AIR, OIL SEAL, AND NO. 4B BEARING FWD RACE ( PULLER ) | 1 | |
| 2C14740 | PULLER, STATION AIR/OIL SEAL - NO. 1 BEARING | 1 | |
| 2C14740 REV C | PULLER, STATION AIR/OIL SEAL - NO. 1 BEARING | 1 | |
| 2C14740G01 | PULLER, STATIONARY AIROIL SEAL-#1 BEARING | 2 | |
| 2C14740P08 | #1 BREARING A/O SEAL PULLER | 1 | |
| 2C14741G01 | GAGE SET, CLEARANCE-CRF/CDP STATIONARY AIR SEAL | 1 | |
| 2C14749G01 | PULLER, NO.3 BEARING AIR SEAL AND HOUSING | 1 | |
| 2C14790 | FIXTURE, RUNOUT - NO. 3 BEARING/SEALS | 1 | |
| 2C14790 REV C | FIXTURE, RUNOUT - NO. 3 BEARING/SEALS | 1 | |
| 2C14790G01 | FIXTURE, RUNOUT - NO. 3 BEARING SEALS | 2 | |
| 2C18118 | 4R BEARING STATIONARY AIR/OIL SEAL GAGE FIXTURE | 1 | |
| 2C4094 | FIXTURE, SEATCHECK- NO 4B BEARING AND SEAL | 1 | |
| 2C5231G01 | Puller − Accessory Drive Gearbox (AGB) Seal Runner | 5 | |
| 2C5249P01 | PROTECTOR HALF, Nº 5 BEARING & SEALS | 1 | |
| 2C5643G01 | PULLER - #3 BEARING CARBON SEAL | 2 | |
| 2C6047G02 | NO. 4 BEARING INNER RACES AND FORWARD SEAL PULLER ADAPTER | 1 | |
| 2C6120G02 | PUSHER INNER RACE SPACER AIROIL SEAL #1 BEARING | 2 | |
| 2C6173 | ADAPTER, TORQUE, SEAL NUT - COMPR REAR SHAFT | 1 | |
| 2C6262 | PULLER,INNER RACE,SPACER,AIR&OIL SEAL #1 BEARING | 1 | |
| 2C6262G04 | PULLER INNER RACES, SPACER, AIR AND OIL SEAL - NO. 1 BEARING | 1 | |
| 2C6299 | PULLER, COMPR ROTOR AFT SEALS & BEARING RACES | 1 | |
| 2C6299G06 | PULLER, NO. 4 BEARING RACES AND SEALS | 1 | |
| 2C6384G02 | CRF/CDP STATIONARY AIR SEAL CLEARANCE GA | 1 | |
| 2C6615G02 | INSTALLATION TOOL ACCY GEARBOX OIL SEAL | 2 | |
| 2C6615G03 | GEAR BOX MATING SEAL RING TOOL SET | 2 | |
| 2C6618 | PULLER FOR MATING SEAL REMOVAL GEARBOX | 1 | |
| 2C6998G05 | FIXTURE SET REMOVAL MATING SEAL RINGS-ACCESORY GEARBOX | 2 | |
| 2C6998G06 | REMOVAL TOOL AACY GEARBOX OIL SEAL | 3 | |
| 2C6I73 | ADAPTER, TORQUE, SEAL NUT - COMPR REAR SHAFT | 1 | |
| 2C7147G02 | FIXTURE, HOLDING, ROT AIR SEAL, NO. 4 BEARING | 1 | |
| 2C7147P02 | FIXTURE, HOLDING, ROT AIR SEAL, NO. 4 BEARING | 1 | |
| 2C7277 | TOOL FORMING-NO.5 BEARING SEAL | 1 | |
| 2C7277G01 | TOOL FORMING-NO.5 BEARING SEAL | 1 | |
| 2C8040JW97247 | CONCENTRICITY #3 BEARING STATIONARY AIR & OIL SEAL | 1 | |
| 2C8072G03 | GEARBOX SEAL PRESS. FIXT. TOOL | 1 | |
| 2C81110G01 | PULLER, NO. 1 BEARING INNER RACE AND SEAL | 1 | |
| 2C81168P01 | Pusher - No. 4 Rear Oil Seal (pusher) | 1 | |
| 2C81179G01 | PULLER, NO. 3 SEAL BEARING HOUSING | 1 | |
| 2C81429G02 | PUSHER, #4 CARBON SEAL, REAR | 1 | |
| 2C81429G03 | PUSHER, NO. 4 REAR CARBON SEAL | 1 | |
| 2C81524G01 | PULLER, BEARING/SEAL NO. 5 (NO | 1 | |
| 2C81524G02 | PULLER, BEARING/SEAL NO. 5 | 1 | |
| 2C91029 | #5 BEARING & SEAL PUSHER | 1 | |
| 2C91330G01 | PULLER - #1 BEARING AND SEAL RUNNER | 1 | |
| 2MIT65B01201 | PULLER - LOWER BEARING SEAL RETAINER, SHOCK STRUT, MAIN LANDING GEAR | 12 | |
| 2MIT65B01202 | Puller - LWR Bearing Seal Retainer SS MLG | 8 | |
| 332A93-3206-00 | MAIN GEAR BOX SEAL ASSEMBLY TOOL | 1 | |
| 332A93-3215-00 | MAIN GEAR BOX, TAIL ROTOR OUTPUT SEAL EXTRACTOR | 1 | |
| 347-3823-2 | RIGHT LOWER REAR T/R SEAL. | 1 | |
| 350A93-3305-20 | REPLACEMENT - TGB INPUT SEAL - TAIL GEAR BOX | 3 | |
| 350A93-3307-00 | REPLACEMENT - TGB INPUT SEAL - TAIL GEAR BOX | 2 | |
| 350A93-3308-00 | REPLACEMENT - TGB INPUT SEAL - TAIL GEAR BOX | 1 | |
| 350A93-3309-00 | REPLACEMENT - TGB INPUT SEAL - TAIL GEAR BOX | 1 | |
| 350A93-3320-00 | FIT. BEARING SEAL / STATIONARY SLEEVE | 1 | |
| 350A93-3320-00/PHP | FIT. BEARING SEAL / STATIONARY SLEEVE | 1 | |
| 350A93-3325-00 | EXT. BEARING SEAL / STAT. SLEEVE | 1 | |
| 350A93-3325-00/PHP | EXT. BEARING SEAL / STAT. SLEEVE | 1 | |
| 350A933320-00/PHP | BEARING SEALING INSTALLATION TOOL | 1 | |
| 350A93332000 | FITTING TOOL LIP SEAL BEAR/STAT PLAT | 1 | |
| 350A93332500 | EXTRACTOR TOOL BEAR SEAL/STAT PLATE | 1 | |
| 365A93-3142-01 | BEARING SEAL | 1 | |
| 365A93310201 | EXTRACTOR SHAFT HOUSING BEARING SEAL | 1 | |
| 365A93334500 | SEAL BEARING BUSH EXTRACTOR | 1 | |
| 3844561-3 | SEAL TURB.REAR BRG | 1 | |
| 3MIT65B01202 | PULLER - LOWER BEARING SEAL RETAINER, SHOCK STRUT, NOSE LANDING GEAR | 9 | |
| 3T6500X01611W142H | TAIL ROTOR GEAR BOX OUTPUT OIL SEAL REMOVAL | 1 | |
| 3T6505G00231 | AW139 TAIL ROTOR GEAR BOX SEAL REPLACEMENT TOOL KIT | 1 | |
| 3T6522A00231-W142AJ | TAIL ROTOR GEAR BOX/SERVO ACTUATOR OIL SEAL FIT/EX | 1 | |
| 3T6522A00231W142AK | TAIL ROTOR GEAR BOX/MAST OUTPUT OIL SEAL ASSEMBLY PRESS TOOL | 1 | |
| 3T6522A00231W142S | TAIL ROTOR GEAR BOX/MAST OUTPUT OIL SEAL ASSEMBLY SUPPORT TOOL | 1 | |
| 40243G-02 | EAR SEAL LIQUID PAIR | 1 | |
| 40863G-02 | EAR SEALS | 5 | |
| 40863G02 | EAR SEAL LIQUID PAIR | 5 | |
| 460004629 | GUIDE - BEARING AND SEAL HOUSING ASSEMBLY | 1 | |
| 460004632 | EXTRACTOR - BEARING AND SEAL HOUSING | 1 | |
| 4MIT65B01221-1 | SPLIT GUIDE - LOWER GLAND SEALS, SHOCK STRUT, NOSE LANDING GEAR | 9 | |
| 5120-01-486-3207 | SET #2 BEARING SEAL | 1 | |
| 57195K81 | BASIC SET (BEARING/ BUSHING AND SEAL DRIVER SETS) | 1 | |
| 5837600-23 | ACCESSORY GEARBOX SEAL ROTOR TOOL | 2 | |
| 5MS08-01300 | ROD BEARING SEAL SIZING BAR | 1 | |
| 6053K11 | DELUXE SET (BEARING/ BUSHING AND SEAL DRIVER SETS) | 1 | |
| 65720-10049-041 | REMOVER, SEAL, GEARBOX | 1 | |
| 65A93-3345-00 | SEAL BEARING BUSH EXTRACTOR | 1 | |
| 6A4113 | HPC REAR SEAL | 1 | |
| 6A5869 | REAR ROTATING SEAL | 1 | |
| 70700-77308-041 | SEAL INSTALLER, INSTALLER, MAIN GEAR BOX TAIL TAKE-OFF SEAL | 1 | |
| 70700-77309-041 | SEAL INSTALLER, INSTALLER, MAIN GEAR BOX HOUSING ASSY SEAL | 1 | |
| 70700-77310-041 | INPUT TAIL GEAR SEAL | 2 | |
| 70700-77311-041 | HABCO BRAND “INSTALLER, SEAL - OUTPUT HOUSING TAIL GEARBOX” | 1 | |
| 70700-77381-041 | MAIN GEAR BOX SEAL INSTALLER | 1 | |
| 72-21-00 | #1 BEARING SEAL HEATER | 1 | |
| 751587-007 | STRAP - UTILITY (INCLUDED IN J32014, LOWER BEARING SEAL REPLACEMENT EQUIPMENT) | 1 | |
| 7MIT65B01211-1 | SPLIT GUIDE - LOWER GLAND SEALS, WING LANDING GEAR AND BODY LANDING GEAR | 11 | |
| 833096-1 | TOOL - BEARING AND ROTTOR SEAL INSTL | 1 | |
| 833096-2 | BEARING AND ROTOR SEAL INSTALLER | 1 | |
| 834447-1 | SEAL REMOVAL FIXTURE (SUPPORTS 3810187-2 BEARING INLET HOUSING ASSEMBLY DURING REMOVAL OF 3611175-1 | 1 | |
| 856A1046 | WRENCH, NO. 3 BEARING - ROTATING SEAL (NO. 3 BEARING WRENCH) | 1 | |
| 856A1046 G01 | Wrench No. 3 Bearing ‐ Rotating Seal | 1 | |
| 856A1046G03 | WRENCH NO. 3 BEARING ‐ ROTATING SEAL | 3 | |
| 856A1171G05 | FIXTURE, PRESSURE TEST - SEAL, STATIONARY, NO. 3 BEARING AFT (PRESSURE TEST FIXTURE) | 1 | |
| 856A1171G06 | FIXTURE, PRESSURE TEST - SEAL, STATIONARY, NO. 3 BEARING AFT (PRESSURE TEST FIXTURE) | 2 | |
| 856A1172G01 | wrench set no 3 bearing aft stationary air oli seal nuts | 1 | |
| 856A1216 | PULLER-NO4 BEARING OUTER RACE, OIL SEAL & AIR DUCT | 2 | |
| 856A1216 G02 | PULLER - NO. 4 BEARING OUTER RACE, OIL SEAL AND AI | 12 | |
| 856A1216G01 | PULLER-NO4 BEARING OUTER RACE, OIL SEAL & AIR DUCT | 3 | |
| 856A1216G02 | Puller - No. 4 Bearing Outer Race, Oil Seal and Air Duct (puller) | 12 | |
| 856A1216G03 | PULLER-NO4 BEARING OUTER RACE, OIL SEAL & AIR DUCT | 1 | |
| 856A1260P01 | GAGE ID INTERSTAGE SEAL HPCS FOR REPAIR OF HPC REAR CASE OF CFM56-7B ENGINE | 6 | |
| 856A1478 | FIXTURE, REMOVAL - NO. 3 BEARING AFT STATIONARY SEAL (REMOVAL FIXTURE) | 1 | |
| 856A1479 | PULLER, SEAL - HP TURBINE REAR ROTATING SEAL (SEAL PULLER) | 1 | |
| 856A1479G01 | Puller, Seal - HP Turbine Rear Rotating Seal (seal puller) | 7 | |
| 856A1826 | FIXTURE, REMOVAL - NO. 3 BEARING AFT STATIONARY SEAL (REMOVAL FIXTURE) | 1 | |
| 856A1826G01 | FIXTURE, REMOVAL - NO. 3 BEARING AFT STATIONARY SEAL (REMOVAL FIXTURE) | 3 | |
| 856A2372G01 | SLEEVE, PROTECTION - REAR INNER ROTATING OIL SEAL | 2 | |
| 856A2375 | PULLER, HYDRAULIC-REAR ROTATING AIR/OIL SEAL | 1 | |
| 856A2375G01 | PULLER, HYDRAULIC - REAR ROTATING AIR/OIL SEAL (PULLER) | 1 | |
| 856A2375G02 | PULLER HYDRULIC REAR ROTATING AIR/OIL SEAL | 1 | |
| 856A2616G01 | SECTOR # CENTERING-LPT SHAFT FWD SEAL(TO CENTER LPT SHAFT RELATIVE TO FAN FRAME DURING NO. 1 AND NO. 2 BEARING SUPPORT MODULE REMOVAL/INSTALLATION) | 5 | |
| 856A2789G01 | RING, CENTERING ROTATING REAR AIR SEAL ON LPT SHAFT | 1 | |
| 856A2789G02 | Ring, Centering - Rear Rotating Air and Oil Seals on LPT Shaft (centering ring) | 6 | |
| 856A2943 | SLEEVE, PROTECT - REAR INNER ROT AIR/OIL SEAL | 1 | |
| 856A2943G01 | SLEEVE, PROTECTION-REAR INNER ROTATING AIR/OIL SEAL | 11 | |
| 856A2943G03 | SLEEVE, PROTECT - REAR INNER ROT AIR/OIL SEAL | 1 | |
| 856A3062 | PULLER REAR ROTATING AIR/OIL SEAL | 1 | |
| 856A3062G01 | PULLER, HYDRAULIC - REAR ROTATING AIR/OIL SEAL | 1 | |
| 856A3062G02 | PULLER, HYDRAULIC - REAR ROTATING AIR/OIL SEAL | 7 | |
| 856A3062G03 | PULLER REAR ROTATING AIR/OIL SEAL | 1 | |
| 856A3063 | PULLER REAR ROTATING AIR SEAL | 1 | |
| 856A3063 G02 | Puller ‐ Rear Rotating Air Seal | 5 | |
| 856A3063G02 | PULLER - REAR ROTATING AIR SEAL | 5 | |
| 856A3272 G01 | Puller ‐ No. 4 Bearing Forward Rotating Oil Seal | 5 | |
| 856A3272G01 | PULLER - 4 BEARING ROTATING OIL SEAL | 5 | |
| 856A3511G02 | SEATING TOOL - AGB SEALOL N°5 GEARSHAFT | 7 | |
| 856A3570 | WRENCH, NO. 2 BEARING INNER RACE SEAL RETAINER (WRENCH) | 1 | |
| 856A3570 G01 | Wrench No. 2 Bearing Inner Race Seal Retainer | 9 | |
| 856A3570G01 | WRENCH, NO. 2 BEARING INNER RACE SEAL RETAINER (WRENCH) | 9 | |
| 856A3576G01 | GEARSHAFT SEAL SEATING TOOL | 21 | |
| 856A3728 | ACCESSORY GEARBOX SEALING PLATE | 1 | |
| 856A4026G02 | FIXTURE MACHINING NO. 3 BEARING FORWARD STATIONARY OIL SEAL | 1 | |
| 856A5641G04 | Fixture Weld And Machine Rear Rotating Air Seal Serrtions | 1 | |
| 876518 | INSERTION JIG FOR OIL SEAL 40*55*7 GEAR BOX COVER | 1 | |
| 877594 | PRESS-IN JIG FOR ROLLER BEARING 25*52*15 AND OIL SEAL 30*52*7 , FOR F2 | 1 | |
| 877615 | EXTRACTOR ASSY FOR ROLLER BEARING, OIL SEAL | 1 | |
| 8818171000 | MODULE 01 ACCESSORY GEARBOX EQUIPMENT - SEAL OF THE BREATHER COVER - REMOVAL / INSTALLATION | 1 | |
| 8818836200 | MODULE 01 ACCESSORY GEARBOX EQUIPMENT - SEAL OF THE BREATHER COVER - REMOVAL / INSTALLATION | 1 | |
| 8819952000 | MODULE 01 ACCESSORY GEARBOX EQUIPMENT - SEAL OF THE BREATHER COVER - REMOVAL / INSTALLATION | 2 | |
| 8C2067 | FIXTURE, INSTALLATION - #4 BEARING CARBON SEAL | 1 | |
| 8C2067G03 | fixture installation no 4 bearing carbon seal holder | 1 | |
| 8C2071 | FIXTURE, REMOVAL - CARBON SEAL, NO. 4 BEARING | 1 | |
| 8C2071G01 | fixture removal no 4 bearing carbon seal | 1 | |
| 8C2071G02 | fixture removal no 4 bearing carbon seal | 1 | |
| 8C2423 | TOOL, INSTALLATION - NO 5 BEARING CARBON SEAL | 1 | |
| 8C2423G01 | Fixture,installation-no 5 bearing carbon seal | 1 | |
| 8C2511 | FIXTURE, PUSHER/PULLER CARBON SEAL NO. 1 BEARING | 1 | |
| 8C2511G01 | Fixture, Pusher/Puller-Carbon Seal, Sp No 1 Bearing | 1 | |
| 8C2512G01 | Guide,No.1 bearing varbon seal | 1 | |
| 8C2513G01 | Fixture Install-No 1 Bearing Carbon Seal | 1 | |
| 8C2514 | FIXTURE, TEST - CARBON SEAL - NO. 1 BEARING | 1 | |
| 8C2514G01 | Fixture,test-carbon seal,no 1 bearing | 1 | |
| 9560176730 | LOAD BEARING MAG SEAL | 1 | |
| 956A1037 | FIXTURE - RESTRAINING - FWD ROTATING OIL SEAL NO. 4 BEARING | 1 | |
| 956A1037G01 | Fixture,restraining-fwd rotating oil seal no 4 bearing | 1 | |
| 956A1037G02 | Fixture,restraining-fwd rotating oil seal no 4 bearing | 1 | |
| 956A1098 | FIXTURE - LEAKAGE TEST-CARBON SEAL - N0 4. BEARING | 1 | |
| 956A1506 | COVER - SEAL - NUT LOCKING NUMBER 3 BEARINGS | 1 | |
| 956A1506P01 | Cover seal-nut locking number 3 bearings | 1 | |
| 956A3039 | PULLER - ASSEMBLY-NO. 4 BEARING FWD ROTATING OIL SEAL | 1 | |
| 956A3039G01 | Puller assembly no 4 bearing fwd rotating air seal | 1 | |
| 956A3093 | FIXTURE - LEAKAGE TEST - CARBON SEAL - NO. 4 BEARING | 1 | |
| 956A3093G01 | Fixture,leakage test-carbon seal No 4 bearing | 1 | |
| 956A3093G02 | Fixture,leakage test-carbon seal No 4 bearing | 1 | |
| 956A3093G03 | Fixture,leakage test-carbon seal No 4 bearing | 1 | |
| 956A3094G02 | fixture install remove carbon seal no 4 bearing | 1 | |
| 956A3504G01 | ffixture install remove seal rotating oil number 3 bearing | 1 | |
| 956A6154 | FIXTURE - INSTALL REAR SEAL SUPPORT - VBV DOOR | 1 | |
| 956A6154G02 | Fixture,install rear seal support-vbvdoor | 1 | |
| 956A6154G03 | Fixture,install rear seal support-vbvdoor | 1 | |
| 956A6201G01 | GEAR BOX CARBON SEALS LEAP | 6 | |
| 956A6303 | PROTECTOR-ROTATING SEAL BEARING NO. 4 | 1 | |
| 956A6304 | FIXTURE, RESTRAIN-ROTATING SEAL BEARING 4 | 1 | |
| 956A6304G01 | Fixture restrain rotating seal bearing 4 | 1 | |
| 956A6311 | FIXTURE - REMOVE - ROTATING SEAL BEARING 4 | 1 | |
| 956A6311G01 | Fixture remove rotating seal bearing 4 | 1 | |
| 956A6339 | REMOVE - ROTATING SEAL BEARING 4 | 1 | |
| 956A6339G01 | Removal,seal rotating ring-bearing 4 | 1 | |
| 956A6423 | PROTECTOR - LPT REAR SUMP SEAL RING | 1 | |
| 956A6425 | COVER - PROTECTOR - RING SEAL BEARING 5 | 1 | |
| 956A6451G01 | Torque wrench-lpt seal ring rear sump trunnion | 1 | |
| 956A6481G01 | Fxiture,push-lpt rear sump seal ring | 1 | |
| 956A6483 | FIXTURE - PUSHER - LPT RING -SEAL BEARING 5 | 1 | |
| 956A6483G02 | Fixture,pusher-lpt ring.seal-bearing 5 | 1 | |
| 956A6489 | FIXTURE - PULLER - LPT RING -SEAL REAR ENCLOSURE | 1 | |
| 956A6489G01 | Fixture,puller-lpt ring,seal rear enclosure | 1 | |
| 956A6491 | FIXTURE - PULLER - LPT RING -SEAL BEARING 5 | 1 | |
| 956A6491G02 | Fixture puller lpt ring seal bearing 5 | 1 | |
| 956A6604 | FIXTURE - HEATER - REAR SEAL NO.5 BEARING | 1 | |
| 956A6617 | FIXTURE, FLOW CHECK - CARBON SEAL NO.5 BEARING | 1 | |
| 956A6619 | FIXTURE - CENTERING - CARBON SEAL NO.5 BEARING | 1 | |
| 956A6809 | WRENCH FOR THE SEAL ROTATING BEARING 1 | 1 | |
| 956A7604G01 | GEAR BOX CARBON SEALS LEAP | 4 | |
| 956A8157 | FIXTURE - ASSY - TORQUING - VBV DOOR & REAR SEAL | 1 | |
| 956A8157G01 | Fixture,assy torquing vbv door and rear seal | 1 | |
| 956A8402 | FIXTURE - INSTALL/REMOVE - RING - SEAL-REAR ENCLOSURE | 1 | |
| 956A8402G01 | Fixture,install/remove-ring seal,rear enclosure | 1 | |
| 956A8402G02 | Fixture,install/remove-ring seal,rear enclosure | 1 | |
| 956A8402G03 | Fixture,install/remove-ring seal,rear enclosure | 1 | |
| 956A8417 | PROTECTOR - RING SEAL - REAR ENCLOSURE | 1 | |
| 956A8437 | HEATER RING - SEAL-REAR ENCLOSURE | 1 | |
| 956A8437G02 | Heater-ring,seal -rear enclosure | 1 | |
| 956A8437G03 | Heater-ring,seal -rear enclosure | 1 | |
| 956A8519 | PROTECTOR - RING SEAL - REAR ENCLOSURE | 1 | |
| 98S52005002001 | Rear cargo door Seal repair tool | 1 | |
| 9C1758G01 | Rear rotating adapter on cdp seal | 1 | |
| 9C1929G02 | ACCESSORY GEARBOX CARBON SEAL AND MATING RING EXTRACTOR TOOL SET | 1 | |
| 9C2321G03 | Tool setting seal rotating no 3 bearing | 1 | |
| 9C3035P01 | TOOL, INSTALLATION - NO.5 BEARING CARBON SEAL | 1 | |
| 9C3067 | SUPERSEDED BY G02FIXTURE, RESTRAINING-NO 3 BEARING, ROTATING SEAL | 1 | |
| 9C3077G01 | Fixture,restraining-no 1 bearing stationary seal | 1 | |
| 9C3084 | FIXTURE, RESTRAINING-NO 5 BEARING SEAL HSG | 1 | |
| A1310B | BEARING AND SEAL DRVR ST 10PC | 1 | |
| A1310LHB | 7PC ALUM SEAL AND BEARING SET | 1 | |
| A1310LHSB | 7PC STEEL SEAL AND BEARING SET | 1 | |
| A1310SB | BEARING AND SEAL DRVR ST 10PC | 1 | |
| A1310SB-69 | FORD F550 REAR WHEEL SEAL DRIV | 1 | |
| A32005 | REPLACEMENT EQUIP – SEAL, LOWER BEARING MLG | 1 | |
| A32005-54 | REPLACEMENT EQUIPMENT - SEAL, LOWER BEARING, MAIN LANDING GEAR (MLG) | 9 | |
| A32005-74 | REPLACEMENT EQUIPMENT - SEAL, LOWER BEARING, MAIN LANDING GEAR (MLG) | 10 | |
| A32029 | REPLACEMENT EQUIPMENT LOWER SEAL NOSE GEAR | 1 | |
| A32029-26 | REPLACEMENT EQUIPMENT - LOWER SEAL, NOSE LANDING GEAR (NLG) | 5 | |
| A32029-48 | REPLACEMENT EQUIPMENT - LOWER SEAL, NOSE LANDING GEAR (NLG) | 2 | |
| A32029-50 | REPLACEMENT EQUIPMENT - LOWER SEAL, NOSE LANDING GEAR (NLG) | 13 | |
| A32107-1 | REPLACEMENT EQUIPMENT - LOWER BEARING SEALS, MAIN LANDING GEAR (MLG) | 2 | |
| A33832 | BEARING SEAL | 1 | |
| A33839 | SEAL BEARING | 1 | |
| A37504 | SEAL, OUTER BEARING | 1 | |
| A37698 | SEAL INNER BEARING | 1 | |
| AEP-00131 | GEARBOX SHAFT SEAL INSTALLATION AID | 1 | |
| AGE13171 | SEAL WEAR RING DRIVER | 2 | |
| AGE13172 | SEAL WEAR RING DRIVER | 2 | |
| AGE13179 | SEAL WEAR RING DRIVER | 1 | |
| AGE13904 | SEAL WEAR RING DRIVER | 1 | |
| AGE13931 | SEAL WEAR RING DRIVER | 1 | |
| AGE70509 | CARBON SEAL REMOVAL, GEARBOX | 1 | |
| AGE70519 | REAR CARBON SEAL CENTERING | 1 | |
| AGE70660 | APS1000C12 APU GEARBOX OIL SEAL TOOL | 3 | |
| AGE70661 | APS1000C12 APU GEARBOX OIL SEAL TOOL | 3 | |
| AGE70661-IAS | APS1000C12 APU GEARBOX OIL SEAL TOOL | 1 | |
| AID-00807 | Installation tool, bearing/seal runner | 1 | |
| AID-00807 | INSTALLATION TOOL, BEARING / SEAL RUNNER | 1 | |
| AID-01209 | CARBON SEAL REMOVAL, GEARBOX | 1 | |
| AID-01408 | GEARBOX SEAL APS5000 | 1 | |
| AID00606 | GEARBOX LIP SEAL INSTALLATION TOOL | 1 | |
| AS350.000.048 | BUSHING REMOVER (USED WHEN REPLACING THE INPUT SEAL OF THE MAIN GEARBOX) | 1 | |
| ASD1 | UNIV ADJ BEAR RACE SEAL DRVER | 1 | |
| AT56024 | Guide bullet and seal fuide, upper bearing installation tool | 1 | |
| AYS3945 | 1.4MM SEALER/CLEAR GUN | 1 | |
| AYS3955 | 1.3MM CLEAR/SEALER GUN | 1 | |
| B27051 | SLEEVE -0 SEAL PROTECTOR, BULL GEAR, HORIZONTAL | 1 | |
| B27051-1 | SLEEVE - SEAL PROTECTOR, BULL GEAR, HORIZONTAL STABILIZER TRIM | 1 | |
| B32024 | PULLER EQUIP - LOWER BEARING SEAL RTNR, NLG | 1 | |
| B32024 REV D | PULLER EQUIP - LOWER BEARING SEAL RTNR, NLG | 1 | |
| B32024-57 | PULLER EQUIP LWR BEARING SEAL | 1 | |
| B32024-82 | Puller Eqpt-NLG Bearing Seal | 8 | |
| B32024-84 | PULLER EQUIPMENT - LOWER BEARING SEAL RETAINER, NOSE LANDING GEAR (NLG) | 6 | |
| B32024-85 | Puller Equipment, Lower Bearing Seal Retainer, NLG | 1 | |
| B32025 | PULLER EQUIP - LOWER BEARING SEAL RTNR,MLG | 1 | |
| B32025 REV E | PULLER EQUIP - LOWER BEARING SEAL RTNR,MLG | 1 | |
| B32025-1 | PULLER EQP-LWR BEARING SEAL RTN MLG | 1 | |
| B32025-42 | PULLER EQPT - LOWER BEARING SEAL RETAINER - MLG | 4 | |
| B32025-61 | Puller Equipment - NLG Bearing Seal Ret | 1 | |
| B32025-75 | PULLER EQUIPMENT - LOWER BEARING SEAL RETAINER, MAIN LANDING GEAR (MLG) | 2 | |
| B32025-78 | PULLER EQUIPMENT - LOWER BEARING SEAL RETAINER, MAIN LANDING GEAR (MLG) | 10 | |
| BTA-62025 | PROTECTOR NLG WHEEL BEARING HUB SEAL, BLUE | 1 | |
| BTA-62026 | B737MAX-8 NW BEARING HUB SEAL-BLUE | 1 | |
| BTA-62027P | NOSE WHEEL HUB & BEARINQ SEAL-YELLOW | 1 | |
| BTA-62028P | MAIN WHEEL HUB & BEARINQ SEAL-RED | 1 | |
| BTA-62028PG | PROTECTOR MLG WHEEL HUB & BEARING SEAL 2 PC | 1 | |
| C32016-3 | REMOVAL/INSTALLATION EQUIPMENT - NOSE LANDING GEAR LOWER SEALS | 5 | |
| C32016-33 | Removal/Installation Equipment - Nose Landing Gear Lower Seals | 11 | |
| C32016-46 | Removal/Installation Equipment - Nose Landing Gear Lower Seals | 15 | |
| C32016-66 | REMOVAL/INSTALLATION EQUIPMENT - NOSE LANDING GEAR LOWER SEALS | 8 | |
| C32017 | REPLACEMENT EQPT LWR BEARING SEALS MAIN LANDING GEAR | 1 | |
| C32017-1 | Replacement Equipment - Lower Bearing Seals, Main Landing Gear | 4 | |
| C32017-43 | REPLACEMENT EQPT - LOWER BEARING SEALS, MLG | 3 | |
| C32017-52 | Replacement Equipment - Lower Bearing Seals, Main Landing Gear | 5 | |
| C32017-53 | Replacement Equipment - Lower Bearing Seals, Main Landing Gear | 17 | |
| C32017-67 | REPLACEMENT EQPT - MLG LWR BEARING SEALS | 5 | |
| C32018-1 | Equipment -Protection Guide. Main Landing Gear And Nose Landing Gear Lower Seals | 10 | |
| C32045-23 | Holding Fixture - Seal Change, Main Landing Gear | 5 | |
| C32045-63 | HOLDING FIXTURE - SEAL CHANGE, MAIN LANDING GEAR | 4 | |
| C32063-1 | HOLDING FIXTURE - SEAL CHANGE, MAIN LANDING GEAR | 1 | |
| C32064-1 | REPLACEMENT EQUIPMENT - LOWER BEARING SEALS, MAIN LANDING GEAR | 4 | |
| CE4-1064 | HPC FRONT AND REAR CASE OUTER AIR SEALS | 1 | |
| CE4-1071 | HPC FRONT AND REAR CASE OUTER AIR SEALS | 1 | |
| CE4-1076 | HPC FRONT AND REAR CASE OUTER AIR SEALS | 1 | |
| CE4-1121 | HPC FRONT AND REAR CASE OUTER AIR SEALS | 1 | |
| CE4-1137 | HPC FRONT AND REAR CASE OUTER AIR SEALS | 1 | |
| CE4-1140 | HPC FRONT AND REAR CASE OUTER AIR SEALS | 1 | |
| CHA698-127 | SEAL BEARING EXTRACTOR | 1 | |
| CJMDS32-006 | MAIN LANDING GEAR OLEO SEAL INSTALLATION TOOL | 1 | |
| CTE6075 | ENG. ASMB. BEARING SEAL LEAKAGE | 4 | |
| D652P3001101 | TAIL GEARBOX INPUT ROTARY-SHAFT-SEAL REPLACEMENT TOO | 1 | |
| D652P3001951 | TAIL GEAR BOX INPUT SEAL TOOL SET | 1 | |
| D652P3003951 | TAIL GEAR BOX OUTPUT SEAL TOOL SET | 1 | |
| DAPT60-0039-00 | BEARING AND SEAL RETAINER | 1 | |
| DAPT60-0047-00 | BEARING SEAL | 1 | |
| DAPT60-0188-00 | WRENCH/SPANNER BEARING (PRESSURE CHAMBER SEAL FAILURE) | 8 | |
| DAPT60-0188-00-IAS | WRENCH/SPANNER BEARING (PRESSURE CHAMBER SEAL FAILURE) | 1 | |
| DAPT60-0188-00IAS | WRENCH/SPANNER BEARING (PRESSURE CHAMBER SEAL FAILURE) | 1 | |
| DAPT60−0188−00 | WRENCH − BEARING, PRESSURE CHAMBER SEAL FAILURE (SERIES 400) | 8 | |
| DAPT64-0144-00 | KIT, TEST, BEARING SEAL | 1 | |
| DJS-40511 | Seal Wear Ring Driver | 1 | |
| DMS-37892 | Seal Wear Ring Driver | 1 | |
| G32033-1 | SLING EQUIPMENT - LOWER SEAL REMOVAL/INSTALLATION, NOSE LANDING GEAR (CE) | 5 | |
| G32033-18 | SLING EQUIPMENT - LOWER SEAL REMOVAL/INSTALLATION, NOSE LANDING GEAR (CE) | 3 | |
| GPM 14003 | LEAP HPT AFT SEAL REAR MASK | 1 | |
| GPM 14004 | LEAP HPT AFT SEAL REAR OVERSPRAY MASK | 1 | |
| GS12790-1 | DRIVER - SEAL, PUMP HOUSING REAR COVER | 2 | |
| GS12791-1 | SUPPORT - SEAL RETAINER PLATE, PUMP HOUSING REAR COVER | 1 | |
| GS13154-1 | Bearing Seal Holder | 2 | |
| GS14652-1 | REAR SEAL INSERTER, PROPELLER PUMP HOUSING ASSY | 2 | |
| GSE56015 | Lower bearing piston seal bullet | 1 | |
| GSE56016 | Lower bearing piston seal bullet | 1 | |
| GSE56241 | GUIDE BULLET & SEAL GUIDE UPPER BRG-SHOCK STRUT ASSY BODY LANDING GEAR | 1 | |
| HA-250-DLST-20-30 | RRM250 Gearbox Seal Install/Removal -406 | 1 | |
| HA-6796941 | C20 GEARBOX SEAL KIT ACCESSORY GEARBOX | 1 | |
| HA6796941 | SEALS REPLACEMENT, ACCESSORIES GEAR BOX | 1 | |
| IAE1F10003 | PUSHER GEAR BOX SEALS | 13 | |
| IAE1F10004 | PUSHER MAIN GEAR BOX SEALS | 12 | |
| IAE1F10008 | PULLER,GEARBOX SEAL HOUSING REMOVAL | 11 | |
| IAE1F10010 | PULLER GEARBOX SEAL HOUSING | 11 | |
| IAE1F10031 | PUSHER,GEARBOX SEAL | 14 | |
| IAE1F10072 | PUSHER,GEARBOX SEAL | 17 | |
| IAE1F1008 | PULLER GEAR BOX SEAL HOUSING | 1 | |
| J27092-1 | Seal installation kit-rotary actuator and gearbox assy | 1 | |
| J32009-29 | REPLACEMENT EQUIPMENT - NOSE LANDING GEAR LOWER SEALS | 6 | |
| J32009-45 | REPLACEMENT EQUIPMENT - NOSE LANDING GEAR LOWER SEALS | 6 | |
| J32009-49 | REPLACEMENT EQUIPMENT - NOSE LANDING GEAR LOWER SEALS | 7 | |
| J32014-116 | REPLACEMENT EQUIPMENT - LOWER BEARING SEALS, MLG | 11 | |
| J32014-26 | Equipment Rep. MLG Lower Bearing Seal | 1 | |
| J32014-89 | REPLACEMENT EQUIPMENT - LOWER BEARING SEALS, MLG | 1 | |
| J32072-34 | REMOVAL EQUIPMENT - DYNAMIC SEAL, NOSE LANDING GEAR (NLG) AND MAIN LANDING GEAR (MLG) | 1 | |
| J32072-35 | REMOVAL EQUIPMENT - DYNAMIC SEAL, NOSE LANDING GEAR (NLG) AND MAIN LANDING GEAR (MLG) | 7 | |
| J32072-36 | REMOVAL EQUIPMENT - DYNAMIC SEAL, NOSE LANDING GEAR (NLG) AND MAIN LANDING GEAR (MLG) | 2 | |
| J32072-37 | REMOVAL EQUIPMENT - DYNAMIC SEAL, NOSE LANDING GEAR (NLG) AND MAIN LANDING GEAR (MLG) | 3 | |
| J32072-49 | REMOVAL EQUIPMENT - DYNAMIC SEAL, NOSE LANDING GEAR AND MAIN LANDING GEAR | 5 | |
| J32072-50 | REMOVAL EQUIPMENT - DYNAMIC SEAL, NOSE LANDING GEAR AND MAIN LANDING GEAR | 8 | |
| J32072-51 | MAIN LANDING GEAR SEAL CUTT | 1 | |
| J32082 | RPLACEMENT EQPT.LOWER BEARING SEALS MLG | 1 | |
| J32082-1 | REPLACEMENT EQPT-LOWER BEARING SEALS,MLG | 1 | |
| J32082-62 | REPLACEMENT EQUIPMENT - LOWER BEARING SEALS, MAIN LANDING GEAR (MLG) | 1 | |
| J32082-69 | Replacement Eqpt - Lower Bearing Seals MLG | 1 | |
| J32082-73 | REPLACEMENT EQUIPMENT - LOWER BEARING SEALS, MAIN LANDING GEAR (MLG) | 6 | |
| J32082-98 | REPLACEMENT EQUIPMENT - LOWER BEARING SEALS, MAIN LANDING GEAR (MLG) | 8 | |
| J3208269 | EQPT LOWER BEAR SEAL | 1 | |
| K-1253 | Kit, Repl. Bearing / Seal | 1 | |
| K-1633 | Kit, Wheel Bearing & Seal | 1 | |
| K0001967 | GEARBOX CARBON SEAL REMOVAL | 1 | |
| K32011 | REPLACEMENT EQPT -0 LOWER BEARING SEALS, MLG | 1 | |
| K32011-1 | REPLACEMENT EQUIPMENT - LOWER BEARING SEALS, MAIN LANDING GEAR | 2 | |
| K32011-2 | REPLACEMENT EQUIP, BEARING SEAL | 4 | |
| K32011-56 | REPLACEMENT EQUIPMENT - LOWER BEARING SEALS, MAIN LANDING GEAR | 1 | |
| K32011-63 | REPLACEMENT EQUIPMENT - LOWER BEARING SEALS, MAIN LANDING GEAR | 3 | |
| K32011-64 | REPLACEMENT EQUIPMENT - LOWER BEARING SEALS, MAIN LANDING GEAR | 2 | |
| K32011-90 | REPLACEMENT EQUIPMENT - LOWER BEARING SEALS, MAIN LANDING GEAR | 4 | |
| K32011-91 | REPLACEMENT EQUIPMENT - LOWER BEARING SEALS, MAIN LANDING GEAR | 6 | |
| K32011‑1 | REPLACEMENT EQUIPMENT - LOWER BEARING SEALS, MAIN LANDING GEAR | 2 | |
| K32015-1 | REPLACEMENT EQUIPMENT - LOWER SEALS, NOSE LANDING GEAR | 4 | |
| L652G3001102 | REPLACEMENT SEAL TAIL ROTOR GEAR BOX INPUT | 1 | |
| L652G3003102 | REPLACEMENT SEAL TAIL ROTOR GEAR BOX OUTPUT | 1 | |
| LTCT12869-01 | Tool, No. 3 Bearing and Seal, Removal/Installation | 1 | |
| LTCT14759-01 | Tool Assembly, No. 1 Bearing and Housing, and No. 1 Seal Installation | 1 | |
| LTCT30329-01 | Tool, No. 4 Bearing Seal, Installation/Removal | 1 | |
| LTCT7518-01 | SET #2 BEARING SEAL | 1 | |
| P1-009 | EARSEAL: GEL,HEADSET,PAIR, | 1 | |
| PWA 12812 | Fixture Compr.rear bearing seal air pressure tube | 1 | |
| PWA 16117 | PULLER NO4.5 BEARING SEALS | 2 | |
| PWA 16197 | FIXTURE NO.6 BEARING SEAL HOUSING | 1 | |
| PWA 30073 | WRENCH REAR COMPRESS0R SEALING TUBE NUT | 1 | |
| PWA 30074 | HOLDER REAR COMPRESS0R SEALING TUBE NUT | 1 | |
| PWA 30075 | PUSHER REAR COMPRESS0R SEALING | 1 | |
| PWA 85312 | HEATER, ELECTRICAL - HPC ROTOR ASSEMBLY REAR HUB (AIR SEAL FLANGE) | 1 | |
| PWA 9133 | PROTECTOR NO.5 BEARING SEAL | 1 | |
| PWA105263 | PULLER-KNOCKER GEARBOX SEAL | 1 | |
| PWA106326 | DRIFT, INSTALL (NO. 4 BEARING INNER RACE, SEALS, AND SPACERS) | 1 | |
| PWA107032 | ADAPTER-MAIN GEARBOX VFG DRIVE OIL SEAL | 1 | |
| PWA107956 | DRIFT, HANDLE-GEARBOX, FACE SEAL ROTATING RING, INSTALL | 1 | |
| PWA111330 | FIXTURE, LEAK TEST - TIC, #4 BEARING FRONT SEAL ASSY | 1 | |
| PWA111331 | FIXTURE, LEAK TEST - TIC, #4 BEARING REAR SEAL ASSY | 1 | |
| PWA111384 | PULLER,HYDRAULIC-CIC,#3 BEARING SEAL ASSY | 1 | |
| PWA111499 | FIXTURE, SUPPORT - #3 BEARING AFT SEAL PLATE | 1 | |
| PWA111687 | FIXTURE,LEAK TEST-FIC,#2 BEARING SEAL ASSY | 1 | |
| PWA111689 | PUSHER, MECHANICAL - NO.3 BEARING , FRT CARBON SEAL ASSY | 1 | |
| PWA111730 | FIXTURE, RETAINER -#3 BEARING SUPPORT, SEAL RINGS | 1 | |
| PWA111749 | PULLER, MECHANICAL #3 BEARING BUSH SEAL | 1 | |
| PWA12015 | DRIFT SEAL SLINGER AND BEARING INNER RACE | 1 | |
| PWA12768 | BEARING 4 1/2 DLIFT FOR SEAL SPACER | 1 | |
| PWA211134 | ENG ASSY, GEARBOX HYD PUMP SHAFT SEAL | 3 | |
| PWA211137 | PULLER, MECHANICAL - IDG SHAFT SEAL FROM THE GEARBOX | 2 | |
| PWA211566 | FIXTURE, LEAK TEST - FDGS, No.1 BEARING SEAL | 1 | |
| PWA211774 | MAIN GEARBOX, SEAL RUNNER, FP, HP, BREATHER, VFG | 3 | |
| PWA211775 | PULLER, MECHANICAL - IDG SHAFT SEAL FROM THE GEARBOX | 2 | |
| PWA211776 | TESTER, GAGE - IDG SHAFT SEAL FROM THE GEARBOX | 3 | |
| PWA211800 | SLEEVE,GUIDE -#1 BEARING OUTER RACE ,SEAL RINGS | 1 | |
| PWA212237 | FIXTURE, INSTALL-CIC , REAR SEAL ASSEMBLY | 1 | |
| PWA25001 | PULLER-SEAL RETAINER GEARBOX TACHOMETER DRIVE | 3 | |
| PWA25004 | BASE CARBON SEAL GEARBOX TACH DRIVE | 1 | |
| PWA25006 | PULLER-SEAL RETAINER GEARBOX HYDRAULIC DRIVES | 2 | |
| PWA25007 | DRIFT CARBON SEAL GEARBOX STARTER DR. INSTALL | 2 | |
| PWA25008 | BASE CARBON SEAL GEARBOX STARTER DRIVE | 1 | |
| PWA25010 | BASE CARBON SEAL GEARBOX HYD DRIVE | 2 | |
| PWA25011 | DRIFT CARBON SEAL GEARBOX F/O DRIVE INSTALL | 2 | |
| PWA25012 | CARBON SEAL GEARBOX F/C DRIVE | 2 | |
| PWA25013 | PULLER SEAL RETAINER GEARBOX | 2 | |
| PWA25014 | PULLER SEAL RETAINER GEARBOX STARTER DRIVE | 2 | |
| PWA25016 | DRIFT CARBON SEAL GEARBOX STARTER DR. REMOVAL | 2 | |
| PWA25017 | DRIFT CARBON SEAL GEARBOX HYD DRIVE REMOVAL | 2 | |
| PWA25019 | BASE CARBON SEAL GEARBOX DRIVE ALTERNATOR | 1 | |
| PWA25020 | DRIFT CARBON SEAL GEARBOX ALT DRAIN REHOLE | 3 | |
| PWA25021 | DRIFT CARBON SEAL GEARBOX DRAIN INSTALL | 2 | |
| PWA25022 | BASE CARBON SEAL GEARBOX | 2 | |
| PWA25023 | DRIFT CARBON SEAL GEARBOX C.S.D REMOVE | 4 | |
| PWA25024 | DRIFT CARBON SEAL GEARBOX C.S.D INSTALL | 1 | |
| PWA27353 | LAP-LAP CONSTANT SPEED DRIVE GEARSHAFT SEAL FACE | 1 | |
| PWA27355 | LAP - TACHOMETER DRIVE GEARSHAFT SEAL FACE | 1 | |
| PWA27357 | LAP - SEAL FACE, HYDRAULIC PUMP DRIVE GEARSHAFT | 1 | |
| PWA27442 | LAP - ALTERNATOR DRIVE GEARSHAFT SEAL FACE | 1 | |
| PWA27443 | LAP-STARTER DRIVE GEARSHAFT SEAL FACE | 4 | |
| PWA27444 | LAP - STARTER DRIVE GEARSHAFT SEAL FACE | 1 | |
| PWA27446 | LAP-DEAERATOR DRIVE GEARSHAFT SEAL FACE | 1 | |
| PWA27908 | COVER - NO.3 BEARING FRONT AIRSEAL_[PWA27908] | 1 | |
| PWA27989 | FIXTURE, SEAL & HOLDER - #3 BRG REAR_[PWA27989] | 1 | |
| PWA29336 | PULLER-GEARBOX ELEC ENGINE CONTKROL GENE SEAL-RETAINER | 1 | |
| PWA29550 | PULLER - GEARBOX DEAERATOR HOUSING INNER FACE SEAL | 1 | |
| PWA29647 | FIXTURE - SEAL ASSEMBLY, N1 & 2 BEARING_[PWA29647] | 2 | |
| PWA30045-3 | SEAL PULLER AUXILLARY GEAR BOX | 1 | |
| PWA53361-2 | TOOTH, BEARING SEAL | 1 | |
| PWA75913 | FIXTURE - HOLDG NO4 BEARING SEAL SPACER_REPLACESPWA27491BYT.B87-067_[PWA75913] | 1 | |
| PWA76366 | SEAL ASSY #1 BEARING | 1 | |
| PWA80011 | PULLER KNOCKER - GEARBOX SHAFT SEAL | 1 | |
| PWA80156 | ADAPTER PULLER GEARBOX SEAL ROTATING RING REMOVAL HYD PUMPS FP/FB | 1 | |
| PWA80157 | ADAPTER PULLER GEARBOX FACE SEAL ROTATING RING REMOVAL IDGS | 1 | |
| PWA80158 | ADAPTER PULLER GEARBOX FACE SEAL ROTATING RING REMOVAL STARTER | 1 | |
| PWA80168 | BASE GEARBOX CARBON SEAL RETAINER DEOILER | 1 | |
| PWA80169 | DRIFT GEARBOX CARBON SEAL REMOVAL DEOILER | 1 | |
| PWA80185 | BASE GEARBOX SEAL RETAINER DEOILER | 1 | |
| PWA80186 | DRIFT GEARBOX CARBON SEAL INSTALLATION DEOILER | 1 | |
| PWA80222 | ADAPTER PULLER GEARBOX FACE SEAL ROTATING RING DEOILER | 1 | |
| PWA80237 | PULLER MECHANICAL GEARBOX PMA FACE SEAL ROTATING RING REMOVAL | 2 | |
| PWA81098 | PULLER-MAIN GEARBOX VFG DRIVE SEAL | 1 | |
| PWA85018-6 | LEAK TEST SEAL ASSY # 2 BEARING | 1 | |
| PWA85018-7 | SEAL ASSY #2 BEARING | 1 | |
| PWA85036 | AIRFLOW CHECK NO. 1 BEARING (CARBON) SEAL ASSEMBLY | 1 | |
| PWA85203 | PULLER-KNOCKER-MAIN GEARBOX IDG DRIVE SEAL RETAINER | 4 | |
| PWA85204 | Puller, Knocker - Engine Assy, Main Gearbox, RR Hydraulic Pump Drive Seal Retainer" | 4 | |
| PWA85723 | PULLER-GEARBOX ELECT ENGINE CONTROL GENERATOR SEAL | 2 | |
| PWA87225 | PULLER, JACKSCREW - MAIN GEARBOX, PMA SEAL RETAINER | 3 | |
| PWC30423 | No. 2 Bearing Air Seal Installation Drift | 4 | |
| PWC31274 | PULLER, NO. 4 BEARING CARBON SEAL | 1 | |
| PWC31275 | DRIFT, NO. 4 BEARING, CARBON SEAL | 1 | |
| PWC31382-01 | EXTRACTOR OIL SEAL ACCESSORY GEARBOX MAINSHAFT | 4 | |
| PWC31562 | PUSHER, NO.4 BEARING CARBON SEAL | 1 | |
| PWC31563 | DRIFT , NO.4 BEARING CARBON SEAL | 1 | |
| PWC31654 | PULLER, NO.3 BEARING ROTOR AIR SEAL | 1 | |
| PWC37093 | CRIMPER, NO. 6 & 7 BEARING CRUSH SEALS | 9 | |
| PWC37099 | Base, Seal No. 6 and 7 Bearing Housing | 1 | |
| PWC37395 | DRIFT, GEARBOX SEAL | 7 | |
| PWC37395B | DRIFT ACCESORY GEARBOX SEAL | 1 | |
| PWC37510 | Puller, Angle Drive to Accessory Gearbox Seal Carrier | 1 | |
| PWC37639 | Support, No. 18, 19 Bearings & Seal Runner Removal | 1 | |
| PWC37910 | Puller, Accessory Gearbox Seal Carrier | 6 | |
| PWC40292 | ADAPTER BEARING SEAL | 1 | |
| PWC41284 | EXTRACTOR - SEAL, FUEL PUMP SPUR GEARSHAFT DRIVE | 4 | |
| PWC41383 | EXTRACTOR-OIL SEAL, ACCESSORY GEAR BOX MAINSHAFT | 3 | |
| PWC42040 | Drift No. 1 bearing carbon seal | 2 | |
| PWC42049 | Drift No. 1 bearing carbon seal | 3 | |
| PWC47089 | PULLER REAR CARBON SEAL | 1 | |
| PWC56429 | Drift, Lip Seal Housing into Reduction Gearbox | 9 | |
| PWC63224 | BASE 4 BEARING SEAL | 1 | |
| PWC66476 | Pusher LP # 5 Bearing & Seal Runner | 1 | |
| PWC67200 | Puller Brush Seal Rear | 1 | |
| PWC67633 | Pusher Brg. Rear Seal & Brush Seal | 1 | |
| PWC69492 | PULLER - 5 BEARING SEAL H-4.3 | 3 | |
| PWC85989 | HEATER - NO 5 REAR CARBON SEAL AREA | 1 | |
| PWC86305 | PROTECTOR NO5 CARBON SEAL REAR | 1 | |
| PWC86530 | DRIFT- 4 BRG REAR CARBON SEAL CLOCKING | 1 | |
| RB 92700-10305-041 | TAIL GEAR BOX & INPUT GEAR BOX SEAL INSTALLER | 2 | |
| RB T101407 | Tail Rotor Seal & Bearing Tool | 1 | |
| RB T101487 | Seal-Bearing Instal | 1 | |
| RB23005023 | PULLER, BEARING & SEAL RING, FRONT COMPRESSOR | 2 | |
| RB23033027 | Puller-Bearing & Mating Seal Race-Frt Compressor | 2 | |
| RB23033030 | DRIFT--INSTALLATION, COMPRESSOR FRONT BEARING INNER RACE AND SEAL | 2 | |
| RB23033033 | Drift-Guided-Compressor Front Bearing Ring Seal | 2 | |
| RB23033035 | Puller-Compressor Front Bearing Ring Seal | 2 | |
| RB23058409 | Rear Power Take Off Seal & Spacer | 2 | |
| RB6795591 | Compressor Rear Bearing & Seal Installation Pusher | 1 | |
| RB6796941 | Seals Replacement Kit, Acc. Gear Box | 3 | |
| RB6796952 | Forward Bearing & Seal Compressor Puller | 1 | |
| RB6798803 | Compressor Rear Labyrinth Rotating Seal Drift | 2 | |
| RB6799518 | Gas Producer Ball Bearing & Labyrinth Seal Puller | 2 | |
| RB6891196 | Power Turbine Rotating Seal & Bearing Press | 2 | |
| RB6893735 | DRIFT--COMPRESSOR REAR LABYRINTH ROTATING SEAL | 1 | |
| RB6893737 | FIXTURE SELECTOR, REAR COMPRESSOR SEAL VENT ORIFICE | 2 | |
| RB6893739 | Puller-Rear Compressor Bearing Oil Slinger & Seal | 2 | |
| RBD29938 | Landing Gear Damper Seal Tool | 2 | |
| RBE117-12020-W20 | Pusher Main Gear Box Input Seal | 2 | |
| RBE332A93-3206-00 | Main Gear Box Seal Assembly Tool | 2 | |
| RBE332A93-3215-00 | Main Gear Box, Tail Rotor Output Seal Extractor | 2 | |
| RBE350A93-3307-0 | TAIL GEAR BOX SEAL EXTRACTOR | 1 | |
| RBE350A93-3307-00 | Tail Gearbox Seal Extractor | 2 | |
| RBEA62318 | TAIL ROTOR GEARBOX SEAL KIT | 2 | |
| RBEL652G-3001-102 | Replacement Seal Tail Rotor Gear Box Input | 2 | |
| RBEL652G-3003-102 | Replacement Seal Tail Rotor Gear Box Output | 2 | |
| RBEM652V3002102 | TAIL GEAR BOX INPUT SEAL EXCHANGE | 2 | |
| RBT101960 | WRENCH, NUT, SEAL, ENGINE GEARBOX | 3 | |
| RBT18020 | Lip Seal and Wear Sleeve Work Aid Kit | 1 | |
| RBT18020-A | Lip Seal and Wear Sleeve Work Aid | 1 | |
| RBT18020-B | Lip Seal and Wear Sleeve Work Aid | 1 | |
| RBT18514 | Output Gearshaft Seal Installation | 1 | |
| RBT18515 | Tail Rotor Gearbox Input Shaft Seal Install Tool | 1 | |
| RBT18560 | Engine Gearbox Seal Puller | 2 | |
| RBT18606 | Input Gearshaft Seal Installation Tool | 1 | |
| RBT18622 | Output Gearshaft Seal Thimble | 1 | |
| RBW10007 | Main Gear Box Input Seal Installation Tool | 1 | |
| RBW10008 | Main Gear Box Input Seal Installation Tool | 1 | |
| RBW109-3130-78-101 | TOOL KIT, 90° GEARBOX DRIVE SEAL REMOVAL/INSTALLATION | 2 | |
| RBW109-3130-80-131 | AW109 90° Gearbox Output Shaft Seal Replacement | 2 | |
| RBW109-3400-95-1 | Tool Assembly, 90° Gearbox Output Shaft Seal Removal | 1 | |
| RBW6500X01611-W142H-3T | Tail Rotor Gear Box Output Oil Seal Removal & Press Tool | 1 | |
| RBW6505G00231-3T | AW139 Tail Rotor Gear Box Seal Replacement Tool Kit | 2 | |
| RBW6522A00231-W142AJ-3T | Tail Rotor Gear Box/Servo Actuator Oil Seal Fit/Extracting Tool | 2 | |
| RBW6522A00231-W142AK-3T | Tail Rotor Gear Box/Mast Output Oil Seal Assembly Press Tool | 1 | |
| RBW6522A00231-W142H-3T | Tail Rotor Gear Box Input Oil Seal Removal And Press Tool | 1 | |
| RBW6522A00231-W142S-3T | Tail Rotor Gear Box/Mast Output Oil Seal Assembly Support Tool | 1 | |
| RRT100115 | DUMMY REAR SEAL | 1 | |
| S5008739-F300 | Seal Wear Ring Driver | 1 | |
| S5009950-F100 | Seal Wear Ring Driver | 1 | |
| SA010463-1 | BEARING SEAL INSPECTION TOOL | 1 | |
| SA010463-2 | BEARING SEAL INSPECTION TOOL | 1 | |
| T-3164660 | REAR OIL SEAL REPL KIT | 1 | |
| T101407 | TAIL ROTOR SEAL & BEARING TOOL | 1 | |
| T101487 | SEAL-BEARING INSTAL | 1 | |
| T101880 | 90 DEGREE GEAR BOX SEAL PRESS | 3 | |
| T101960 | WRENCH, NUT, SEAL, ENGINE GEARBOX | 1 | |
| TB9063G001 | GEARBOX LIP SEALS DRIVERS | 1 | |
| TB9065G001 | GEARBOX PUMP LIP SEAL PILOT | 1 | |
| TB9066G001 | GEARBOX IDLER LIP SEAL PILOT | 1 | |
| TB9067G001 | GEARBOX LIP SEAL RETAINER PULLER | 1 | |
| TL-220685 | KIT GEARBOX SEAL REMOVAL INSTALLATION | 1 | |
| TL220685 | KIT GEARBOX SEAL REMOVAL INSTALLATION | 1 | |
| TM2984G002 | REAR BEARING SEAL REMOVAL TOOL | 1 | |
| TM4992G001 | MODULE 01 ACCESSORY GEARBOX AND TRANSMISSION SHAFT - MAGNETIC SEAL OF THE DRIVE SHAFT (TOOL TM4735G001) - REPLACEMENT | 3 | |
| TS3P | EARSEAL (PAIR) | 1 | |
| XPWA211800 | Sleeve,guide-#1 bearing outer race,seal rings | 1 | |
| XPWA212139 | Puller,mechanical-cic,#3 brg rear seal plate | 1 | |
| lC569l | PULLER NO. 6 BEARING INNER RING & ROTATING OIL SEAL | 1 | |
| lC5702 | PUSHER- NO 6 BEARING AND SEAL RACE | 1 | |
| lC6800 | PUSHER, ROTATING SEALS-O/S TRANSDUCER GEAR & BRG RACES- | 1 | |
| lC680l | PULLER, ROTATING SEALS & BEARING RACES-AFT SHAFT | 1 | |
| AEP-00131 | GEARBOX SHAFT SEAL INSTALLATION AID | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
