| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 10RS.47 | Douglas Reference Standard | 1 | |
| SN09530004-3 | DOUGLAS REFERENCE STANDARD | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 10RS.26.1BM | DOUGLAS DC-10 REFERENCE STANDARD 54.10.031/.032 PAGES 1-8 (SHEET1-8). INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| 10RS.26.1bM | DOUGLAS DC-10 REFERENCE STANDARD 54.10.031/.032 PAGES 1-8 (SHEET1-8). Includes Test Report and Certificate of Conformance. | 1 | |
| 10RS.50 | DOUGLAS DC-10 REFERENCE STANDARD 54.10.031/.032 PAGES 1-5 (SHEET1-5). Includes Test Report and Certificate of Conformance. | 1 | |
| 17P9M2007 | Douglas Reference Standard Assembly For the Ultrasonic Calibration of Upper Wing Skin to common Stringer, Figure24-4 sheets 253. Material: 7075 Aluminum. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| 2506F | S/B 57-200 Douglas DC-9 Reference Standard 7075-T6 Aluminum. Figure 5, 6,7 | 1 | |
| 71658-10-42 | DOUGLAS DC-10 HORIZONTAL STABILIZER REFERENCE STANDARD 4130 or 4340 STEEL, SB A55-17 PAGE 21 FIG.1(SHEET 3) BOLT IDENTIFICATION 71658-10-42 (5/8" X 4.1") | 1 | |
| 71658-10-46 | DOUGLAS DC-10 HORIZONTAL STABILIZER REFERENCE STANDARD 4130 or 4340 STEEL, SB A55-17 PAGE 21 FIG.1(SHEET 3) BOLT IDENTIFICATION 71658-10-46 (5/8" X 4.4") | 1 | |
| 71658-14-45 | DOUGLAS DC-10 HORIZONTAL STABILIZER REFERENCE STANDARD 4130 or 4340 STEEL, SB A55-17 PAGE 21 FIG.1(SHEET 3) BOLT IDENTIFICATION 71658-14-45 (7/8" X 4.8") | 1 | |
| 71658-14-50 | DOUGLAS DC-10 HORIZONTAL STABILIZER REFERENCE STANDARD 4130 or 4340 STEEL, SB A55-17 PAGE 21 FIG.1(SHEET 3) BOLT IDENTIFICATION 71658-14-50 (7/8" X 5.1") | 1 | |
| 71658-16-55 | DOUGLAS DC-10 HORIZONTAL STABILIZER REFERENCE STANDARD 4130 or 4340 STEEL, SB A55-17 PAGE 21 FIG.1(SHEET 3) BOLT IDENTIFICATION 71658-16-55 (1.0" X 6.0") | 1 | |
| 71658-18-53/2&3 | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 4340 CARBON STEEL, 54-10-11 PAGE 651 FIG.603 SHEET 39 | 1 | |
| 71658-18-59 | DOUGLAS DC-10 HORIZONTAL STABILIZER REFERENCE STANDARD 4130 or 4340 STEEL, SB A55-17 PAGE 21 FIG.1(SHEET 3) BOLT IDENTIFICATION 71658-8-59 (1 1/8" X 6.25") | 1 | |
| 71658-18-64 | DOUGLAS DC-10 HORIZONTAL STABILIZER REFERENCE STANDARD 4130 or 4340 STEEL, SB A55-17 PAGE 21 FIG.1(SHEET 3) BOLT IDENTIFICATION 71658-18-64 (1 1/8" X 6.5") | 1 | |
| 71658-20-68 | DOUGLAS DC-10 HORIZONTAL STABILIZER REFERENCE STANDARD 4130 or 4340 STEEL, SB A55-17 PAGE 21 FIG.1(SHEET 3) BOLT IDENTIFICATION 71658-20-68 (1 1/4" X 7.0") | 1 | |
| 71658-7-35/1&4 | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 4340 CARBON STEEL, 54-10-11 PAGE 651 FIG.603 SHEET 39 | 1 | |
| 7637987-9 | A53-142 Douglas DC-9 7637987-9 Reference Standard Assembly 2024-T3 Clad Aluminum. Figure 1, Sheets 2&3 | 1 | |
| AFNDT-2010AL | Custom McDonnell Douglas 15 bolt hole reference standard with a .060"L x .030Dx .005" max width mid-wall notch, and .030"x.030"x.005" max width corner notch in each hole. Hole sizes (.156", .172", .188", .203", .250", .266", .281", .297", .313", .328"... | 1 | |
| AFNDT-3141AL | Custom McDonnell Douglas 12 bolt hole reference standard 7075-T6 Aluminum with a .060"L x .030Dx .005" max width mid-wall notch, and .030"x.030"x.005" max width corner notch in each hole. Hole sizes (.125, .156", .187", .250", .281", ..312", .375", .4... | 1 | |
| AFNDT-3141AL-1 | Custom McDonnell Douglas 12 bolt hole reference standard 7075-T6 Aluminum with .005" max width through EDM notch in holes #1-#6 and a .060"L x .030"D x .005" max width mid-wall notch in holes #7-12, and .030"x.030"x.005" max width corner notch in each hol | 1 | |
| AFNDT-3141AL-2 | Custom McDonnell Douglas 12 bolt hole reference standard 7075-T6 Aluminum with a .060"L x .030Dx .005" max width mid-wall notch, and .030"x.030"x.005" max width corner notch in each hole. Hole sizes (.2966, .3122", .3278", .3434", .359", ..3746", .3902", | 1 | |
| AFNDT-3231 | Custom McDonnell Douglas Low Frequency Eddy Current reference standard, 06-20-01 Figure 9 sheets 1-4. Material: 2024-T3 or 7075-T6 Aluminum. Fasteners: (NAS1097AD6-5 & BACB30NW6K3). Includes Test Report and Certificate of Confromance. | 1 | |
| AFNDT-3231-1 | Custom McDonnell Douglas Low Frequency Eddy Current reference standard, 06-20-01 Figure 9 sheets 1-4. Material: 2024-T3 or 7075-T6 Aluminum.Fasteners: (CR3223-5 & MS21141-5). Includes Test Report and Certificate of Confromance. | 1 | |
| CA12-1508A | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 7075-T7 ALUMINUM, 54-10-11 PAGE 634A FIG.603 SHEET 21B | 1 | |
| CA12-1683A | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 4340 STEEL, 54-10-11 PAGE 632C FIG.603 SHEET 20C | 1 | |
| DAC ETOH-AL-1/2 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 1/2 (0.500) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-1/4 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 1/4 (0.250) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-1/8 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 1/8 (0.125) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-11/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 11/16 (0.6875) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-3/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 3/16 (0.1875) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-3/4 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 3/4 (0.750) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-3/8 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 3/8 (0.375) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-5/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 5/16 (0.3125) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-5/8 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 5/8 (0.625) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-7/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 7/16 (0.4375) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-9/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 9/16 (0.5625) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-1/2 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 1/2 (0.500) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-1/4 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 1/4 (0.250) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-1/8 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 1/8 (0.125) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-11/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 11/16 (0.6875) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-3/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 3/16 (0.1875) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-3/4 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 3/4 (0.750) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-3/8 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 3/8 (0.375) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-5/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 5/16 (0.3125) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-5/8 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 5/8 (0.625) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-7/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 7/16 (0.4375) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-FE-9/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Steel. 9/16 (0.5625) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-1/2 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 1/2 (0.500) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-1/4 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 1/4 (0.250) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-1/8 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 1/8 (0.125) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-11/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 11/16 (0.6875) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-3/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 3/16 (0.1875) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-3/4 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 3/4 (0.750) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-3/8 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 3/8 (0.375) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-5/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 5/16 (0.3125) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-5/8 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 5/8 (0.625) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-7/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 7/16 (0.4375) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-IT-9/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Titanium. 9/16 (0.5625) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC GSET-AL | MCDONNELL DOUGLAS REFERENCE STANDARD 06-20-01 7075-T6 | 1 | |
| DAC GSET-AL.01 | MCDONNELL DOUGLAS REFERENCE STANDARD 06-20-01 FIG.1 SHEETS 1-3. MATERIAL: 7075-T6 ALUMINUM PER QQ-Q-250/12. | 1 | |
| DAC GSET-FE | MCDONNELL DOUGLAS REFERENCE STANDARD 06-20-01 4340 | 1 | |
| DAC GSET-FE.01 | MCDONNELL DOUGLAS REFERENCE STANDARD 06-20-01 FIG.1 SHEETS 1-3. MATERIAL: 4340 STEEL PER MIL-S-5000 | 1 | |
| DAC GSET-MG | MCDONNELL DOUGLAS REFERENCE STANDARD 06-20-01 ALUMINUM BRONZE | 1 | |
| DAC GSET-SS.01 | MCDONNELL DOUGLAS REFERENCE STANDARD 06-20-01 FIG.1 SHEETS 1-3. MATERIAL: 303SE CRES or 301 1/2 HARD CRES STEEL. | 1 | |
| DAC GSET-TI.01 | MCDONNELL DOUGLAS REFERENCE STANDARD 06-20-01 FIG.1 SHEETS 1-3. MATERIAL: 6AL-4V TITANIUM PER AMS 491 or MIL-T-9046 | 1 | |
| DC-10 FIG603/15C | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 6AL-4V TITANIUM, 54-10-11 PAGE 628B FIG.603 SHEET 15C | 1 | |
| DC-10 FIG603/15E/4340 | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 4340 CARBON STEEL, 54-10-11 PAGE 628D FIG.603 SHEET 15E | 1 | |
| DC-10 FIG603/15E/Ti | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 6AL-4V TITANIUM, 54-10-11 PAGE 628D FIG.603 SHEET 15E | 1 | |
| DC-10 FIG603/15G | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 4340 CARBON STEEL, 54-10-11 PAGE 628F FIG.603 SHEET 15G | 1 | |
| DC-10 FIG603/23 | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 7075-T6 ALUMINUM, 54-10-11 PAGE 635 FIG.603 SHEET 23 | 1 | |
| DC-10 FIG603/24-Al | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 2024-T351 ALUMINUM, 54-10-11 PAGE 636C FIG.603 SHEET 24 | 1 | |
| DC-10 FIG603/24-Ti | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 6AL-4V TITANIUM, 54-10-11 PAGE 636C FIG.603 SHEET 24 | 1 | |
| DC-10 FIG603/25 | DOUGLAS DC-10 WING CLEVIS REFERENCE STANDARD 6AL-6V or 6AL-4 TITANIUM, 54-10-11 PAGE 637 FIG.603 SHEET 25 | 1 | |
| DC-10 FIG603/27Al | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 2024-T351 ALUMINUM, 54-10-11 PAGE 639 FIG.603 SHEET 27 | 1 | |
| DC-10 FIG603/27Ti | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 6AL-4V TITANIUM, 54-10-11 PAGE 639 FIG.603 SHEET 27 | 1 | |
| DC-10 FIG603/28LOWER/Al | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 2024-T351 ALUMINUM, 54-10-11 PAGE 640 FIG.603 SHEET 28 (LOWER) | 1 | |
| DC-10 FIG603/28LOWERTi | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 6AL-4V TITANIUM, 54-10-11 PAGE 640 FIG.603 SHEET 28 (LOWER) | 1 | |
| DC-10 FIG603/28UPPER/Al | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 2024-T351 ALUMINUM, 54-10-11 PAGE 640 FIG.603 SHEET 28 (UPPER) | 1 | |
| DC-10 FIG603/28UPPER/Ti | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 6AL-4V TITANIUM, 54-10-11 PAGE 640 FIG.603 SHEET 28 (UPPER) | 1 | |
| DC-10 FIG603/29Al | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 2024-T351 ALUMINUM, 54-10-11 PAGE 641 FIG.603 SHEET 29 | 1 | |
| DC-10 FIG603/29Ti | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 6AL-4V TITANIUM, 54-10-11 PAGE 641 FIG.603 SHEET 29 | 1 | |
| DC-10 FIG603/30-AL | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 7075-T6 ALUMINUM, 54-10-11 PAGE 642 FIG.603 SHEET 30 | 1 | |
| DC-10 FIG603/39-1 | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 4130 or 4340, 54-10-11 PAGE 651 FIG.603 SHEET 39, BOLT IDENTIFICATION 71658-7-35 #1 | 1 | |
| DC-10 FIG603/39-2 | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 4130 or 4340, 54-10-11 PAGE 651 FIG.603 SHEET 39, BOLT IDENTIFICATION 71658-18-53 #2 | 1 | |
| DC-10 FIG603/39-3 | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 4130 or 4340, 54-10-11 PAGE 651 FIG.603 SHEET 39, BOLT IDENTIFICATION 71658-18-53 #3 | 1 | |
| DC-10 FIG603/39-4 | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 4130 or 4340, 54-10-11 PAGE 651 FIG.603 SHEET 39, BOLT IDENTIFICATION 71658-7-35 #4 | 1 | |
| DC-10 FIG603/43 | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 2024-T351 ALUMINUM, 54-10-11 PAGE 655 FIG.603 SHEET 43 | 1 | |
| DC-10 FIG603/5 | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 4340 CARBON STEEL, 54-10-11 PAGE 617 FIG.603 SHEET 5 | 1 | |
| MD11-04-210 | McDONNELL DOUGLAS ULTRASONIC REFERENCE STANDARD (MDC-K225) FIGURE 1.29, PG.1 SECTION 2-1. Includes Test Report and Certificate of Conformance. | 1 | |
| MD11-04-325 | McDONNELL DOUGLAS ULTRASONIC REFERENCE STANDARD (MDC-K5225 FIGURE 1.30, PG.1 SECTION 2-1. Includes Test Report and Certificate of Conformance. | 1 | |
| MD11-04-400 | McDONNELL DOUGLAS ULTRASONIC REFERENCE STANDARD (MDC-K225) FIGURE 1.31, PG.1 SECTION 2-1. Includes Test Report and Certificate of Conformance. | 1 | |
| MD11-10 | McDONNELL DOUGLAS ULTRASONIC REFERENCE STANDARD (MDC-K5225 SECTION 2-1 PG.1 FIG.1.23.. 2024-T3 ALUMINUM | 1 | |
| MD11-11 | McDONNELL DOUGLAS ULTRASONIC REFERENCE STANDARD (MDC-K5225 FIGURE 1.27 SHEETS 1-6, PG.1-6 SECTION 2-1 | 1 | |
| SB09530016-5/303SS | DOUGLAS REFERENCE STANDARD 53-253, 303/SS | 1 | |
| SB09530016-5/AL | DOUGLAS REFERENCE STANDARD 53-253, 7075-t651 | 1 | |
| SB09530016-5/TI | DOUGLAS REFERENCE STANDARD 53-253, TITANIUM | 1 | |
| SB09550023-17 | Douglas Reference Standard Assembly 55-23 Figure1 sheets 1-5, Pages 31-35. Material: 2024-T3 Aluminum. Includes Test Report Traceable to NIST and Certificate of Conformance. | 2 | |
| SB10270203-3 | Douglas Reference Standard, DC10-A27-203 - PRIMER, GREY TOPCOAT | 1 | |
| SB10270203-5 | Douglas Reference Standard, DC10-A27-203 - HT, CAD PLATE, PRIMER, GREY TOPCOAT | 1 | |
| SB10550016-147 | Douglas Reference Standard, DC10-55A016 R07, Page 14, Figure 1, Sheet 1 | 1 | |
| SB11530001-5 | DOUGLAS MD-11 REFERENCE STANDARD. MD11-53-001 FIGURE 1 SHEET 1. MATERIAL: 7075-T6 ALUMINUM | 1 | |
| SN10280002 | DOUGLAS REFERENCE STANDARD FIGURE 2 SHEETS 2-8. INCLUDES GANG CHANNEL PART NUMBER RMG9421-3-7-2. Test Report and Certificate of Conformance included. | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
