| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 10133G-41 | DYNAMIC MIC | 3 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| "BBDREF002199348 295-42700-160 | DYNAMIC SEAL | 1 | |
| 0061R55140 | DYNAMIC RESPONSE WINDOW | 1 | |
| 0061S49612 | DYNAMIC RESPONSE PROGRAM | 1 | |
| 0856AE17 | PROBE-AERODYNAMICALLY COMPENSATED | 1 | |
| 10-100-2020HR | DYNAMICBALANCINGINSTRUMENT | 2 | |
| 10-320-0294 | PROPELLER DYNAMIC BALANCE CABLE | 1 | |
| 100-0128-04 | TOOL SUMP DRAIN (SEAL DYNAMICS LLC) | 4 | |
| 101-00212 | DYNAMICBALANCINGINSTRUMENT | 9 | |
| 1046GT2102AY | DYNAMIC BOOM MICROPHONE & HEADSET | 19 | |
| 109-3101-23-1 | M/R DYNAMIC BALANCE CHART | 1 | |
| 109-8101-60-1 | WEIGHT M/R DYNAMIC BALANCE | 1 | |
| 109-8101-60-3 | WEIGHT M/R DYNAMIC BALANCE | 1 | |
| 109-8101-60-5 | WEIGHT M/R DYNAMIC BALANCE | 1 | |
| 109-8101-60-7 | WEIGHT M/R DYNAMIC BALANCE | 1 | |
| 111.0000 | KUNZ DUBB (DYNAMIC UNIVERSAL BEAD BREAKER) | 1 | |
| 111.3000 | DYNAMIC UNIVERSAL BEADBREAKER | 1 | |
| 12515G-12 | COMMUNICATION HEAD SET WITH NOISE SHIELD AMPLIFIED DYNAMIC MICROPHONE & 25 FT CORD. | 14 | |
| 1276716-1 | EXT-TOOL FOR DYNAMIC D2 CONN | 1 | |
| 1366044-1 | H.H.H.T.ASSY FOR DYNAMIC D5-L | 1 | |
| 1583660-2 | DYNAMIC BRAKE RESISTOR | 1 | |
| 1620.00 | General Dynamics G300, G350, G400, G450, G500, G550 Nose Jack | 1 | |
| 16A23061L1-1 | COVER, AIRCRAFT GROUND DESIGN GENERAL DYNAMICS | 3 | |
| 1C5931 | PULLER, DYNAMIC BALANCE | 1 | |
| 1C5931G01 | PULLER, DYNAMIC BALANCE | 1 | |
| 1C5979 | PULLEY, DYNAMIC BALANCE - HPT | 1 | |
| 1C5979G01 | PULLEY, DYNAMIC BALANCE - HPT | 1 | |
| 1C6114 | TOOL SET, DYNAMIC BALANCE | 1 | |
| 1C6114G01 | TOOL SET, DYNAMIC BALANCE | 1 | |
| 1C8087G01 | DYNAMIC BALANCE-COMRESSOOR ROT | 1 | |
| 1C8088 | TOOL SET DYNAMIC BALANCE HPT | 1 | |
| 1C8088G01 | TOOL SET DYNAMIC BALANCE HPT | 1 | |
| 1C8089G01 | DYNAMIC BALANCE -COMRESSOR RTR | 1 | |
| 1C8090 | TOOL SET, DYNAMIC BALANCE - PT ROTOR ASSEMBLY | 1 | |
| 1C8090G02 | TOOL SET, DYNAMIC BALANCE - PT ROTOR ASSEMBLY | 1 | |
| 2157 | DYNAMIC BALANCER/ANALYZER KIT | 1 | |
| 2307/03 | 2307/03;OLP-85 - Broadband Power Meter 100 dB dynamic range | 1 | |
| 2308/03 | 2308/03;OLP-85P - Broadband Power Meter 100 dB dynamic range and PCM | 1 | |
| 234168-1 | EXTRACTION TOOL(DYNAMIC D-3) | 1 | |
| 27F-000-212-57-10-1204 | REFERENCE STANDARD FOR DYNAMIC INSPECTION | 1 | |
| 27F-2-212-57-10-1204 | REFERENCE STANDARD FOR DYNAMIC INSPECTION | 1 | |
| 2C14916G01 | SHROUD, DYNAMIC BALANCE 3‐9 SPOOL | 1 | |
| 3001S011 | SALES@AERODYNAMICSINTERNATIONAL.COM | 1 | |
| 3076/94.32 | 3076/94.32;Dynamic Skew Variation Software | 1 | |
| 3076/97.32 | 3076/97.32;CFP8 Dynamic Skew generation | 1 | |
| 31-9123-1 | DYNAMIC MICROPHONE | 1 | |
| 32017-23 | DYNAMIC SEAL PLUNGER - MLG | 1 | |
| 341A31490602 | LORD DYNAMIC ADAPTERS | 1 | |
| 3561A | DYNAMIC SIGNAL ANALYSER | 1 | |
| 35670A | DYNAMIC SIGNAL ANALYZER 4CH | 1 | |
| 3G1800G00131 | TOOL KIT, T/R TRACKING/DYNAMIC BALANCI | 1 | |
| 3G1805G00133 | TOOL KIT, TRACKING/DYNAMIC BALANCING | 1 | |
| 402-806.60 | 402-806.60;Dynamic Skew - Module Option | 1 | |
| 403-806.60 | 403-806.60;Dynamic Skew - Module Option | 1 | |
| 4115-0801W03 | MLG DYNAMIC SEALS CALIBRATION SOCLE | 1 | |
| 4124-0023W02 | NLG DYNAMIC SEALS CALIBRATION TOOL | 1 | |
| 42-903-04-053 | ASSEMBLY DYNAMICALLY | 1 | |
| 4500-1985-001 | HARD POINT VERIFICATION TOOL, HAVT (ROCKWELL COLLINS/FLIGHT DYNAMICS TOOL #4500-1985-001) | 1 | |
| 500141R | GREASE GUN, LEVER ACTION (LIQUIDDYNAMICS) | 2 | |
| 50085 | DYNAMIC TORQUE TRANSDUCER DEMO KIT 59200 (2-16 Nm) | 1 | |
| 513.61.12.002 | EQUIPMENT PROP, DYNAMIC BALANCING | 1 | |
| 513.61.12.061 | PROP, DYNAMIC BALANCING ADAPTOR KIT | 1 | |
| 525-342G0-954-3440 | SEAL, DYNAMIC ROD | 1 | |
| 543-1 | GENERATOR - RANDOM NOISE, AUDIO OUTPUT (FORMERLY FROM PACIFIC ELECTRO DYNAMICS INC.) | 9 | |
| 5815A0000-01 | GUIDE - DYNAMIC SEAL | 1 | |
| 58828-856A2012P01 | DYNAMIC RIG LIMIT CALC. | 1 | |
| 59200 | WIRELESS DYNAMIC TORQUE TRANSDUCER. INPUT 3/8", OUTPUT 3/8". 2~16 Nm | 1 | |
| 59201 | WIRELESS DYNAMIC TORQUE TRANSDUCER. INPUT 3/8", OUTPUT 3/8". 5~40 Nm | 1 | |
| 59202 | WIRELESS DYNAMIC TORQUE TRANSDUCER. INPUT 3/8", OUTPUT 1/2". 10~80 Nm | 1 | |
| 59203 | WIRELESS DYNAMIC TORQUE TRANSDUCER. INPUT 1/2", OUTPUT 1/2". 18~145 Nm | 1 | |
| 59204 | WIRELESS DYNAMIC TORQUE TRANSDUCER. INPUT 1/2", OUTPUT 1/2". 25~200 Nm | 1 | |
| 59205 | WIRELESS DYNAMIC TORQUE TRANSDUCER. INPUT 1/2", OUTPUT 3/4". 50~400 Nm | 1 | |
| 59206 | WIRELESS DYNAMIC TORQUE TRANSDUCER. INPUT 3/4", OUTPUT 3/4". 75~600 Nm | 1 | |
| 59207 | WIRELESS DYNAMIC TORQUE TRANSDUCER. INPUT 1", OUTPUT 1". 100~800 Nm | 1 | |
| 59208 | WIRELESS DYNAMIC TORQUE TRANSDUCER. INPUT 1", OUTPUT 1". 150~1200 N.m | 1 | |
| 59209 | WIRELESS DYNAMIC TORQUE TRANSDUCER. INPUT 1", OUTPUT 1 1/2". 200~1600 N.m | 1 | |
| 59210 | WIRELESS DYNAMIC TORQUE TRANSDUCER. INPUT 1.1/2", OUTPUT 1 1/2". 300~2400 N.m | 1 | |
| 500141 | GREASE GUN, LEVER ACTION (LIQUIDDYNAMICS) | 1 | |
| 501188 | Pulley – Dynamic Balancing Drive | 1 | |
| 602-3375 | 602T DYNAMIC MIC/BUT | 1 | |
| 60837-008 | 66TRA DYNAMIC HANDHELD MICROPHONE, RIGHT ANGLE PLUG | 1 | |
| 615P016F035 | DYNAMIC ROTATING METAL PROBE EDDY CURRENT TOOLS | 2 | |
| 615P020F035 | DYNAMIC ROTATING METAL 200KHZ-2MHZ 5/16 | 1 | |
| 615P024F035 | DYNAMIC ROTATING METAL 200KHZ-2MHZ 3/8 | 1 | |
| 615P04F035 | DYNAMIC ROTATING METAL PROBE EDDY CURRENT TOOLS | 1 | |
| 6263-6101 | MLG DYNAMIC SEALS CALIBRATION BULLET | 1 | |
| 64300-210 | HEADSET: DYNAMIC,XLR | 12 | |
| 66T-RA | 66TRA DYNAMIC HANDHELD MICROPHONE, RIGHT ANGLE PLUG | 1 | |
| 67.90 | General Dynamics GI, GII Nose Jack | 1 | |
| 679718 | SHROUD, TURB ROTOR DYNAMIC BAL | 1 | |
| 6796107 | SPACER, BEARING, ROTOR DYNAMIC BAL | 1 | |
| 6796309 | PULLEY, MOTOR, ROTOR DYNAMIC BAL, 66 IN | 1 | |
| 6796718 | SHROUD, TURB ROTOR DYNAMIC BAL | 1 | |
| 6799745 | HALF BEARING, FRONT, ROTOR DYNAMIC BAL | 1 | |
| 6799746 | PULLEY, DRIVE, ROTOR DYNAMIC BAL | 1 | |
| 6799766 | HALF BEARING, REAR, TURBINE ROTOR DYNAMIC BAL | 1 | |
| 7332MT-954-P4 | SEAL DYNAMIC PISTON | 1 | |
| 7340FT160P4 | RING, AGT DYNAMIC | 1 | |
| 79000494-1 | VINCENT MARTIN / FLY DYNAMICS | 3 | |
| 81-2001046-00 | NLG S ABS DYNAMIC SEAL KIT | 1 | |
| 841-009 | DYNAMIC BRAKE RESISTOR | 1 | |
| 8500 | DYNAMIC BALANCER | 5 | |
| 8500C | DYNAMIC BALANCER | 4 | |
| 8500C PLUS | DYNAMIC BALANCER | 1 | |
| 8500C Plus | DYNAMIC BALANCER | 1 | |
| 8500C-C295-A | DYNAMIC BALANCER/ANALYZER KIT | 1 | |
| 8500C-CN235-A | DYNAMIC BALANCE EQUIPMENT | 1 | |
| 856A1214P03 | INDICATOR FOR VSV DYNAMIC RIGGING PROCEDURE | 1 | |
| 856A1221G01 | PIN FOR VSV DYNAMIC RIGGING PROCEDURE | 16 | |
| 856A2001G03 | VSV DYNAMIC VERIFICATION TOOL | 4 | |
| 856A2001G04 | FIXTURE FOR VSV DYNAMIC RIGGING PROCEDURE | 2 | |
| 856A2001P17 | FIXTURE, INDICATE -VSV POSITION DYNAMIC RIG SIGNAL CONDITIONER | 1 | |
| 856A2012P01 | CALCULATOR VSV DYNAMIC RIGGING PROCEDURE | 3 | |
| 901-10800-2 | DYNAMIC BALANCER | 3 | |
| 90683-2 | PROCRIMPER DIE ASSY DYNAMIC | 1 | |
| 90684-2 | PROCRIMPER DIE ASSY DYNAMIC | 1 | |
| 914.00 | General Dynamics G300, G350, G400, G450, G500, G550 Wing / Main Jack | 1 | |
| 915-18205 | DYNAMIC BALANCER/ANALYZER KIT | 1 | |
| 915-18632 | VXP DYNAMIC BALANCE ANALYSIS SYSTEM ACCESSORY KIT | 3 | |
| 91595-1 | CERTICRIMP 2 22-18 DYNAMIC D2-M | 1 | |
| 91596-1 | SDE SAHT 20-16 DYNAMIC D5-SS | 1 | |
| 918.00 | General Dynamics G200 Wing / Main Jack | 1 | |
| 9017310 | VIBRATION SENSOR FOR DYNAMIC PROPELLER BALANCING | 5 | |
| 9174910080 | DYNAMIC SEAL | 1 | |
| 94-8136 | TOOL SUMP DRAIN (SEAL DYNAMICS LLC) | 21 | |
| 9441M84 | CONTROL SHROUD LOCK, DYNAMIC BALANCE OPERATION | 1 | |
| 95-0600-150 | DYNAMIC PRESSURE PIPE CAHNGEOVER JOINT | 1 | |
| 9560176620 | HYDRODYNAMIC MAGNETIC SEAL | 1 | |
| 9560176630 | HYDRODYNAMIC MAGNETIC SEAL | 1 | |
| 9560176640 | HYDRODYNAMIC MAGNETIC SEAL | 1 | |
| 956A6201G01 | SET, R/I - DYNAMIC SEAL, AGB | 6 | |
| 956A6990 | ET - REMOVE/INSTALL - DYNAMIC SEAL -AGB | 1 | |
| 956A6990G01 | SET, REMOVE/INSTALL DYNAMIC SEAL, AGB | 2 | |
| 956A8900 | SET - REMOVE/INSTALL - DYNAMIC SEAL - AGB | 1 | |
| 956A8900G01 | SET, REMOVE/INSTALL - DYNAMIC SEAL, AGB | 7 | |
| 9620911070 | DYNAMIC SEAL | 1 | |
| 98A10001003000 | STATIC DYNAMIC PITOT COVER | 7 | |
| 98A10001005000 | STATIC DYNAMIC PITOT COVER | 30 | |
| 98A10001013000 | STATIC DYNAMIC PITOT COVER | 25 | |
| 98D10103500042 | STATIC DYNAMIC PITOT COVER | 13 | |
| 98D10103500043 | STATIC DYNAMIC PITOT COVER | 13 | |
| 98S61003006000 | PROPELLER DYNAMIC BALANCING ANALIZER - V2KATR | 6 | |
| A330-92091-0001 | AERODYNAMIC SURFACE SLIN | 1 | |
| ADA A120-612 | Static-dynamic Pressure Test Adapters | 1 | |
| ADA120-612 | STATIC-DYNAMIC PRESSURE ADAPTERS | 2 | |
| AFNDT-3119AL | Aluminum Dynamic Split Hole Reference Block. Material: 7075-T651 aluminum. 16 Holes with 1/16" Cross Drilled Holes on both sides. Hole Sizes: 4.5mm, 5.0mm, 6.0mm, 6.5mm, 7.0mm, 7.5mm, 8.0mm, 9.0mm, 10mm, 12mm, 14mm, 16mm, 20mm, 22mm, 24mm. Tolerance +/... | 1 | |
| AFNDT-3119TI | Titanium Dynamic Split Hole Reference Block. Material: 6Al-4v Titanium. 16 Holes with 1/16" Cross Drilled Holes on both sides. Hole Sizes: 4.5mm, 5.0mm, 6.0mm, 6.5mm, 7.0mm, 7.5mm, 8.0mm, 9.0mm, 10mm, 12mm, 14mm, 16mm, 20mm, 22mm, 24mm. Tolerance +/- .... | 1 | |
| AFNDT-3459AL | Calibration standard, Aluminium alloy 2024-T3, rotary (dynamic) eddy current testing, cross-drilled hole type per BAe 146 Ref. NTM Part 6,20-00-00), for diameters of (5/16 in. (7.94 mm), 13/16 in. (20.64 mm), 7/8 in. (22.23 mm), 1.1/16 in. (26.99 mm), 1. | 1 | |
| AFNDT-3459TI | Calibration standard, 6Al-4v Titanium , rotary (dynamic) eddy current testing, cross-drilled hole type per BAe 146 Ref. NTM Part 6,20-00-00), for diameters of (5/16 in. (7.94 mm), 13/16 in. (20.64 mm), 7/8 in. (22.23 mm), 1.1/16 in. (26.99 mm), 1.1/8 in | 1 | |
| BTR-55140 | DYNAMIC RESPONSE WINDOW | 1 | |
| BTS-49612 | DYNAMIC RESPONSE PROGRAM | 1 | |
| C-HVIBREX2000 | KIT, BALANCING, DYNAMIC PROPELLING | 1 | |
| C32016-45 | DYNAMIC SEAL GUIDE | 6 | |
| C32016-7 | Dynamic Seal Stuffer | 4 | |
| C32016-7PM | DYNAMIC SEAL STUFFER | 1 | |
| C32016-9 | DYNAMIC SEAL GUIDE | 1 | |
| C32017 -23 | DYNAMIC SEAL PLUNGER | 4 | |
| C32017-23 | DYNAMIC SEAL PLUNGER | 4 | |
| C32017-29 | DYNAMIC SEAL SLEEVE | 1 | |
| C32017-54 | Dynamic Seal Sleeve | 7 | |
| C32017-7 | DYNAMIC SEAL CLAMP | 2 | |
| D46795 | JAW FILE - NLG DYNAMIC SEAL | 17 | |
| DDU250 | MICROPHONE,DYNAMIC | 1 | |
| DYNA VIBE | DYNAMIC PROPELLER BALANCER | 1 | |
| DZZ7465-503 | DYNAMIC WINDSHIELD SYSTEM TEST SET | 1 | |
| ENB00010BZ | ENHA, SYNTIS DYNAMIC BUMP CAP BLACK MICRO | 1 | |
| EV2K | ENHANCED VIBREX 2000 PLUS - DIGITAL DYNAMIC BALANCER | 1 | |
| EXTRANGE | EXTRANGE;EXTEND DYNAMIC RANGE TO E41xxA OTDR MODULES | 1 | |
| EXTRANGE-UPG | EXTRANGE-UPG;UPGRADE LICENSE TO EXTEND DYNAMIC RANGE TO E41xxA OTDR AND SMARTOTDR AS | 1 | |
| EXTRANGE100WEB | EXTRANGE100WEB;EXTEND DYNAMIC RANGE TO SPECIFIC SMARTOTDR | 1 | |
| EZXDC2234A1 | DYNAMIC BRAKE MODULE | 1 | |
| G10008-1 | PLUG - OUTBOARD STRUT, AERODYNAMIC SCOOP CAVITY | 1 | |
| G698-272001-101 | Rudder Aerodynamic Zero | 2 | |
| G698−272001−101 | Rudder Aerodynamic Zero | 2 | |
| GSB6110013 | KIT-DYNAMIC PROPELLER BALANCING | 1 | |
| GSE2320492 | DYNAMIC HAND MICROPHONE | 1 | |
| Gedore-019100 | Gedore 019100 RTU1 - Dynamic Torque Limiter, Range : 0.1-1 N.m / 0.9-8.8lbf.in | 1 | |
| Gedore-019200 | Gedore 019200 RTU4 - Dynamic Torque Limiter, Range : 0.6-4.5 N.m / 5.5-39.8lbf.in | 1 | |
| Gedore-019400 | Gedore 019400 RTU14 - Dynamic Torque Limiter, Range : 2-14 N.m / 18-123.8lbf.in | 1 | |
| H10-30 | HEADSET, TWIN PLUGS, DYNAMIC AMPLIFIED MIC | 8 | |
| H3312 | COMMUNICATION HEAD SET WITH NOISE SHIELD AMPLIFIED DYNAMIC MICROPHONE & 25 FT CORD. | 13 | |
| HF3UB | MACHINE, HORIZONTAL DYNAMIC BALANCE (SCHENK CORP.) | 1 | |
| HL50UB | DYNAMIC BALANCE MACHINE | 1 | |
| HR.312SS/35WL | DYNAMIC ROTATING METAL 200KHZ-2MHZ 5/16 | 1 | |
| HR.375SS/35WL | DYNAMIC ROTATING METAL 200KHZ-2MHZ 3/8 | 1 | |
| J32072 | REMOVAL EQPT-DYNAMIC SEAL,NLG & MLG | 1 | |
| J32072-22 | Dynamic Seal Removal Eqpt | 1 | |
| J32072-22-M | DYNAMIC SEAL REMOVAL EQPT | 1 | |
| J32072-27 | DYNAMIC SEAL REMOVAL EQPT | 1 | |
| J32072-28 | Removal Eqpt-Dynamic | 1 | |
| J32072-28-M | REMOVAL EQPT-DYNAMIC SEAL | 1 | |
| J32072-34 | REMOVAL EQUIPMENT - DYNAMIC SEAL, NOSE LANDING GEAR (NLG) AND MAIN LANDING GEAR (MLG) | 1 | |
| J32072-35 | REMOVAL EQUIPMENT - DYNAMIC SEAL, NOSE LANDING GEAR (NLG) AND MAIN LANDING GEAR (MLG) | 7 | |
| J32072-36 | REMOVAL EQUIPMENT - DYNAMIC SEAL, NOSE LANDING GEAR (NLG) AND MAIN LANDING GEAR (MLG) | 2 | |
| J32072-37 | REMOVAL EQUIPMENT - DYNAMIC SEAL, NOSE LANDING GEAR (NLG) AND MAIN LANDING GEAR (MLG) | 3 | |
| J32072-49 | REMOVAL EQUIPMENT - DYNAMIC SEAL, NOSE LANDING GEAR AND MAIN LANDING GEAR | 5 | |
| J32072-50 | REMOVAL EQUIPMENT - DYNAMIC SEAL, NOSE LANDING GEAR AND MAIN LANDING GEAR | 8 | |
| LTC12021-01 | BALANCING MACHINE,DYNAMIC-STATIC,HORIZON | 1 | |
| M46200 | JAW FALSE - NLG DYNAMIC SEAL | 18 | |
| M46201 | WRENCH PIN - NLG DYNAMIC SEAL | 18 | |
| MIL-PRF-81733 | POLYSULFIDE AERODYNAMIC SEALAN | 1 | |
| MODEL 8500 | DYNAMIC BALANCER (HONEYWELL ZING) | 1 | |
| PLZ664WA | DYNAMIC LOAD | 3 | |
| PWA25421A | WRENCH - HPT DYNAMIC BAL_[PWA25421A] | 1 | |
| PWA25514 | RIVETER - INLET CONE DYNAMIC BAL_[PWA25514] | 2 | |
| PWA25573 | WEIGHT - HPC DYNAMIC BAL_[PWA25573] | 1 | |
| PWA25765 | RIVETER - HPC DYNAMIC BAL_[PWA25765] | 2 | |
| PWA25770 | WEIGHT - CALIBRATION - HPT DYNAMIC BAL_[PWA25770] | 1 | |
| PWA27739 | WEIGHT, BAL - HPT DYNAMIC BALANCE_[PWA27739] | 1 | |
| PWA27740 | WEIGHT, CALIBRATION - HPT DYNAMIC BAL_[PWA27740] | 1 | |
| PWA27839 | WEIGHT - LPT DYNAMIC BALANCE_[PWA27839] | 1 | |
| PWA27863 | WEIGHT,CALIBRATION - LPC DYNAMIC BAL_[PWA27863] | 1 | |
| PWA27864 | WEIGHT, CALIBRATION - LPC DYNAMIC BAL_[PWA27864] | 1 | |
| RAAA0805 | DYNAMIC COMBINATION WRENCH SET M.M. | 1 | |
| RRT025891 | DYNAMIC BALANCE H.P. COMP ROTOR | 1 | |
| RSA5106B | REAL-TIME SIGNAL ANALYSER (RSA), 1 HZ – 6.2 GHZ, RSA5106B 56 (REMOVABLE SSD), RSA5106B B85HD (HIGH DYNAMIC RANGE, 85 MHZ ACQUISITION BANDWIDTH), RSA5106B 09 (ENHANCED REAL TIME), RSA5106B 20 (PULSE MEASUREMENT), RSA5106B 21 (GENERAL PURPOSE MODULATION ANA | 1 | |
| SA610 | TOOL - DYNAMIC RIGGING, SIGNAL PROCESSING SYSTEMS | 1 | |
| TEE62-2 | DYNAMIC RIG SYSTEM, FSCM | 2 | |
| TEL-66T | 66T HAND MICROPHONE - DYNAMIC | 8 | |
| TEL66T | 66T HAND MICROPHONE - DYNAMIC | 8 | |
| UNTUR12.6M/250WL-1M | INTERNAL PROBE FOR DYNAMIC ANALYSIS | 1 | |
| UNTUR12.6M/250WL-1M 500KHZ | INTERNAL PROBE FOR DYNAMIC ANALYSIS (200KHZ -1MHZ) | 1 | |
| VIBREX 2000 | 355N/TEST SET -DIGITAL DYNAMIC BLNCR | 4 | |
| VIBREX 2000 PLUS | DYNAMIC BALANCER/ANALYZER SYSTEM | 3 | |
| VXP | PROPELLER DYNAMICS BALANCING SET | 1 | |
| Z2020HR | DYNAMICBALANCINGINSTRUMENT | 1 | |
| Z2020HR-PROP-110V-PL | ACES SYSTEMS DYNAMIC PROP BALANCE & VIBRATION KIT PL (110V) | 2 | |
| Z2020HR-PROP220V | DYNAMICBALANCINGINSTRUMENT | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
