| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 178-230-3 | DRIVE UNIT | 1 | |
| 2041-444-0401 | DRIVE UNIT | 5 | |
| 2041444-0401 | DRIVE UNIT | 5 | |
| 2041445-0503 | DRIVE UNIT | 1 | |
| ENEHXD120 | DRIVE UNIT | 1 | |
| ENEHXD240 | DRIVE UNIT | 1 | |
| ENEHXD30 | DRIVE UNIT | 1 | |
| ENEHXD60 | DRIVE UNIT | 1 | |
| J78007-13 | DRIVE UNIT | 1 | |
| MINIMITE | DRIVE UNIT | 1 | |
| PWA86441 | DRIVE UNIT | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) G29010-1 | R/I RQPT Air Drive Unit & Pump (CALIBRATION) (CALIBRATION) | 1 | |
| 06-5022-6800 | Integrated Drive Generator Servicing Unit | 14 | |
| 073-200-003 | MINIATURE DRIVE UNIT, 600-3000 RPM | 1 | |
| 073‐200‐003 | MINIATURE DRIVE UNIT, 600‐3000 RPM | 1 | |
| 123100-3 | PDU( POWER DRIVE UNIT | 1 | |
| 127100-9 | BIG WHEEL POWER DRIVE UNIT | 1 | |
| 12BAA303 | CONNECTION CABLE 1M/40IN FOR DRIVE UNIT | 2 | |
| 12ME61B50002 | STOWAGE PALLET - 12 POWER DRIVE UNITS | 1 | |
| 13ME61B50002 | STOWAGE PALLET - 10 POWER DRIVE UNITS | 1 | |
| 140CU20P5 | GROUND POWER UNIT - ELECTRICAL - 115 V, 140 KVA, 400 HZ - DIESEL DRIVEN - TRAILER MOUNTED | 1 | |
| 140DZ20 | GROUND POWER UNIT - ELECTRICAL - 115 V, 140 KVA, 400 HZ - DIESEL DRIVEN - TRAILER MOUNTED | 1 | |
| 140DZ20P5 | GROUND POWER UNIT - ELECTRICAL - 115 V, 140 KVA, 400 HZ - DEUTZ DIESEL DRIVEN - TRAILER MOUNTED | 1 | |
| 140T400 | GROUND POWER UNIT - ELECTRICAL - 115 V, 140 KVA, 400 HZ - DIESEL DRIVEN - TRAILER MOUNTED | 1 | |
| 16A11738L1-1 | PULLER ASSEMBLY, BEARING - MOUNT, POWER DRIVE UNIT | 1 | |
| 16MIT65B04017 | WRENCH - DRIVE UNIT, LEADING EDGE | 1 | |
| 178-230-2 | SURFTEST SJ-210 DRIVE UNIT | 1 | |
| 189DTT | KIT - ELECTRONIC CONTROL WITH DRIVE UNIT, COMPRESSOR TURNING | 1 | |
| 189DTT-U | KIT - ELECTRONIC CONTROL WITH DRIVE UNIT, COMPRESSOR TURNING | 1 | |
| 189ETT-U | KIT - ELECTRONIC CONTROL WITH DRIVE UNIT, COMPRESSOR TURNING | 1 | |
| 2041444-0401 | WEATHER RADAR DRIVE UNIT | 5 | |
| 2041445-0403 | ANTENNA DRIVE UNIT | 4 | |
| 30100 | PDL-ARINC615/615A WITH CABLE CONNECTION TO A/C MULTIPURPOSE DISK DRIVE UNIT (MDDU) | 20 | |
| 23052528 | WRENCH, POWER-UNIT ACCESSORY-DRIVE FORWARD-END ALTERNATOR-SHAFT-NUT | 2 | |
| 23052530 | ADAPTER, POWER-UNIT ACCESSORY-DRIVE STARTER-SHAFT DRIVE | 2 | |
| 23053655 | SET, POWER-UNIT ACCESSORY DRIVE GEARBOX | 1 | |
| 23068605 | WRENCH, POWER-UNIT ACCESSORY-DRIVE FORWARD-END ALTERNATOR-SHAFT-NUT | 2 | |
| 27-1-4324 | ADAPTER-CLUTCH TORQUE, FLAP DRIVE UNIT | 2 | |
| 27.1-4324 | ADAPTER-CLUTCH TORQUE FLAP DRIVE UNIT F50 | 2 | |
| 293343-1 | Hydraulic Drive Unit Test Kit | 1 | |
| 2AJ65B81132 | ASSEMBLY JIG - POWER UNIT INBOARD TRAILING EDGE FLAP DRIVE | 1 | |
| 2AJ65B81133 | ASSEMBLY JIG - POWER UNIT OUTBOARD TRAILING EDGE FLAP DRIVE | 1 | |
| 2MIT65B81132 | MISCELLANEOUS TOOL - POWER UNIT ASSEMBLY, INBOARD TRAILING EDGE FLAP DRIVE | 1 | |
| 2R18849 | UNIT, CONTOL AND DRIVE | 1 | |
| 2TE65B63076 | TEST EQUIPMENT - SIMULATOR, STEERABLE POWER DRIVE UNIT | 1 | |
| 324E | AC UNIT ELECTRIC / PERTOL DRIVEN | 1 | |
| 33A100 | DRIVE UNIT-MINIATURE | 2 | |
| 360-03607-000 | MDDU-MULTIPURPOSE DISK DRIVE UNIT | 3 | |
| 3MIT65B81132 | MISCELLANEOUS TOOL - POWER UNIT ASSEMBLY, INBOARD TRAILING EDGE FLAP DRIVE | 1 | |
| 3TE65B63076 | TEST EQUIPMENT - SIMULATOR, STEERABLE POWER DRIVE UNIT | 1 | |
| 403475 009 | PDL-ARINC615/615A WITH CABLE CONNECTION TO A/C MULTIPURPOSE DISK DRIVE UNIT (MDDU) | 3 | |
| 403475-009 | PDL-ARINC615/615A WITH CABLE CONNECTION TO A/C MULTIPURPOSE DISK DRIVE UNIT (MDDU) | 3 | |
| 40A100 | DRIVE UNIT-MINIATURE (600-3000RPM) | 3 | |
| 40A100M | EDDY CURRENT DRIVE UNIT MINIATURE | 1 | |
| 41-755-33 | KIT: DRIVE,GROUND POWER UNIT, | 1 | |
| 43115-17 | UNIT ASSY-RETRACTABLE PWR DRIVE | 1 | |
| 4T1523 | TORQUE, MOTOR DRIVE-VSV CONTROL UNIT | 1 | |
| 4T1524 | TORQUE, MOTOR DRIVE-VSV CONTROL UNIT | 1 | |
| 58173 | FLAP DRIVE UNIT | 2 | |
| 59010001 | 70.V.1-SQUARE DRIVE UNIT 1/4"-1/4" | 1 | |
| 59010003 | 70.V.3-SQUARE DRIVE UNIT 3/8"-3/8" | 1 | |
| 59010005 | 70.V.5-SQUARE DRIVE UNIT 3/8"-1/2" | 1 | |
| 59010007 | 70.V.7-SQUARE DRIVE UNITS 1/2"-1/2" | 1 | |
| 59010008 | 70.V.8-SQUARE DRIVE UNIT 3/4"-3/4" | 1 | |
| 59010014 | 70.V.11-SQUARE DRIVE UNIT 3/8"-1/4" | 1 | |
| 59010015 | 70.V.12-SQUARE DRIVE UNIT 3/4"-3/4" | 1 | |
| 59010016 | 70.V.16-SQUARE DRIVE UNIT 3/4"-3/4" | 1 | |
| 59011012 | SQUARE DRIVE UNIT FOR TORQUE WRENCHES | 1 | |
| 5TE65B63076 | TEST EQUIPMENT SIMULATOR - STEERABLE POWER DRIVE UNIT | 1 | |
| 60CU20F | GROUND POWER UNIT - ELECTRICAL - 60 KVA, 115 V, 400 HZ - DIESEL DRIVEN - FIXED BASE | 1 | |
| 60CU20P5 | UNIT - ELECTRICAL GROUND POWER - TRAILER MOUNTED - 60 KVA, 400 HZ, 115 VOLTS DIESEL DRIVEN. | 1 | |
| 622-5135-202 | DRIVE UNIT-WEATHER RADAR | 1 | |
| 640-010-048 | CBLE,1.5M, FOR MINIATURE DRIVE UNIT | 3 | |
| 640-030-040 | MINIATURE DRIVE UNIT | 4 | |
| 6TE65B63076 | TEST EQUIPMENT - SIMULATOR, STEERABLE/RETRACTABLE POWER DRIVE UNIT | 1 | |
| 822-2131-003 | DRIVE UNITE | 1 | |
| 827-0178-001 | ANTENNA DRIVE UNIT | 1 | |
| 833549-1 | Hydraulic Drive Unit Test Kit | 1 | |
| 8510 | Printer/disk drive unit | 2 | |
| 856A2746 | TOOL DRIVE SHAFT LUBE UNIT | 1 | |
| 856A2746G01 | TOOL DRIVE SHAFT LUBE UNIT | 5 | |
| 90CU24P5 | GROUND POWER UNIT - ELECTRICAL - 90 KVA 115 VAC, 400 HZ - CUMMINS 6 CYLINDER DIESEL DRIVEN - TRAILER MOUNTED. | 1 | |
| 90CU420P5 | GROUND POWER UNIT - ELECTRICAL - 90 KVA, 115 VAC, 400 HZ - DIESEL (DEUTZ) DRIVEN - TRAILER MOUNTED | 1 | |
| 9744738 | DRIVER UNIT KIT | 5 | |
| A24008-19 | TEST BOX - HYDRAULIC MOTOR DRIVEN GENERATOR CONTROL UNIT | 3 | |
| A24008-27 | TEST BOX - HYDRAULIC MOTOR DRIVEN GENERATOR CONTROL UNIT | 3 | |
| A24008-37 | TEST BOX - HYDRAULIC MOTOR DRIVEN GENERATOR CONTROL UNIT | 11 | |
| A27007-19 | FLAP DRIVE UNIT SAFETY | 13 | |
| A27009-7 | LOCK-FLAP DRIVE UNIT R B767 | 20 | |
| A27060-11 | JIG EQUIPMENT - INBOARD AND OUTBOARD LEADING EDGE SLAT DRIVE AND TRAILING EDGE FLAP DRIVE POWER CONTROL UNIT | 1 | |
| A27079-78 | TEST EQUIPMENT - POWER DRIVE UNIT, TE FLAP AND LE SLAT DRIVE | 1 | |
| A27079-89 | TEST EQUIPMENT - POWER DRIVE UNIT, TE FLAP AND LE SLAT DRIVE | 1 | |
| A27079-96 | TEST EQUIPMENT - POWER DRIVE UNIT, TE FLAP AND LE SLAT DRIVE | 1 | |
| AJ65B81132 | ASSEMBLY JIG - POWER UNIT ASSEMBLY, INBOARD TRAILING EDGE FLAP DRIVE | 1 | |
| AJ65B81133 | ASSEMBLY JIG - POWER UNIT ASSEMBLY, OUTBOARD TRAILING EDGE FLAP DRIVE | 1 | |
| ALT45200001 | PDL-ARINC615/615A WITH CABLE CONNECTION TO A/C MULTIPURPOSE DISK DRIVE UNIT (MDDU) | 1 | |
| ARD002 | DRIVE UNIT-MINIATURE | 1 | |
| B27006-65 | HOIST EQUIPMENT - POWER DRIVE UNIT (PDU), LEADING EDGE SLATS, REMOVAL/INSTALLATION | 1 | |
| B27008 | LOCK -0 T.E. FLAP, POWER DRIVE UNIT | 1 | |
| B27008-1 | LOCK - TRAILING EDGE FLAP, POWER DRIVE UNIT | 24 | |
| B27008-1 | LOCK - T.E. FLAP, POWER UNIT DRIVE | 24 | |
| B27008-2 | LOCK TE FLAP POWER DRIVE UNIT B27008-1 | 1 | |
| B27014-20 | LOCK - TRAILING EDGE FLAP, POWER DRIVE UNIT | 10 | |
| B27014-23 | Lock T.E. Flap Power Drive Unit | 1 | |
| B27067-1 | SLING EQUIPMENT - TRAILING EDGE FLAP POWER DRIVE UNIT REMOVAL/INSTALLATION | 7 | |
| BA-20-3D | BEARING ANALYZER DRIVE UNIT | 1 | |
| Bauer Model 7083 | CARGO POWER DRIVE UNIT (PDU) TEST STAND | 1 | |
| C0035 | WEAR MEASURING (FLAP DRIVE UNIT) TOOL | 1 | |
| C0036 | WEAR MEASURING (FLAP DRIVE UNIT) TOOL | 1 | |
| CH3126-0025 | MANUAL DRIVE UNIT CAP | 1 | |
| CPN827-0178-001 | ANTENNA DRIVE UNIT | 1 | |
| D12025-001 | PUMPING UNIT, HYDRAULIC, HAND DRIVEN | 1 | |
| D72D72684-111 | BIT - SCREWDRIVER, SPECIAL (5EA UNIT PRICE USD 45) | 9 | |
| DAC200PE | AC UNIT ELECTRIC / PERTOL DRIVEN | 1 | |
| DLT02MAPP100 | PUMPING UNIT, HYDRAULIC, HAND DRIVEN | 1 | |
| DLT02MAPP1000 | PUMPING UNIT,HYDRAULIC,HAND DRIVEN | 13 | |
| DLT05MAPM1000 | PUMPING UNIT,HYDRAULIC,HAND DRIVEN | 6 | |
| F2MA927522300 | MEASURING FIXTURE FOR FLAP POWER DRIVE UNIT BACKLASH | 1 | |
| F73000 | UNIT-TEST DRIVE, TE FLAP TRANSMISSION USED TO | 1 | |
| G25007-1 | TEST EQUIPMENT- CARGO POWER DRIVE UNIT, LIMIT SWITCH ASSEMBLY | 1 | |
| G27029-1 | SPANNER SOCKET - POWER UNIT, INBOARD TRAILING EDGE FLAP DRIVE | 1 | |
| G27056-1 | HOIST ADAPTER - POWER DRIVE UNIT, OUTBOARD TRAILING EDGE FLAP (CE) | 3 | |
| G29010-1 | REMOVAL/INSTALLATION EQUIPMENT - AIR DRIVE UNIT AND PUMP (CE) | 1 | |
| G29010-2 | REMOVAL/INSTALLATION EQUIPMENT - AIR DRIVE UNIT AND PUMP (CE) | 1 | |
| G601R242300-1 | ADG BACK DRIVE UNIT GSE | 1 | |
| GPU-409-E-CUP | GROUND POWER UNIT - ELECTRICAL - 90 KVA, 115 V, 400 HZ - DIESEL DRIVEN - TRAILER MOUNTED | 2 | |
| GPU-4120 | GROUND POWER UNIT - ELECTRICAL - 120 KVA, 115 V, 400 HZ - DIESEL DRIVEN - TRAILER MOUNTED | 1 | |
| J25014-1 | BLANKING PLATE - FREIGHTER COMMON TURNTABLE, POWERED DRIVE UNIT, MAIN DECK | 3 | |
| J27004-1 | REMOVAL/INSTALLATION EQUIPMENT - SLAT POWER DRIVE UNIT (CE) | 6 | |
| J27004-24 | REMOVAL/INSTALLATION EQUIPMENT - SLAT POWER DRIVE UNIT (CE) | 3 | |
| J27015-1 | SPLINE ADAPTER - LE/TE POWER DRIVE UNIT, MANUAL DRIVE | 6 | |
| J27065-1 | TEST EQUIPMENT - POWER DRIVE UNIT, FLAP | 1 | |
| J29003-85 | HOIST ADAPTER - AIR DRIVE UNIT (ADU) REMOVAL/INSTALLATION (CE) | 7 | |
| J29003-93 | HOIST ADAPTER - AIR DRIVE UNIT (ADU) REMOVAL/INSTALLATION | 7 | |
| J52028-1 | BACKLASH FIXTURE EQUIPMENT - MANUAL DRIVE GEARBOX, LATCH POWER DRIVE UNIT (PDU), LARGE CARGO DOOR | 1 | |
| K27001-1 | Removal/Installation Equipment-Leading Edge/Trailing Edge Power Drive Unit (Pdu) (Ce) | 1 | |
| K27001-100 | REMOVAL / INSTL EQUIPMENT - LEADING EDGE / TRAILING EDGE POWER DRIVE UNITS | 3 | |
| K27001-126 | REMOVAL/INSTALLATION EQUIPMENT- LEADING EDGE/TRAILING EDGE POWER DRIVE UNIT (PDU) (CE) | 8 | |
| K27028 | Spline Adapter -Leading Edge/Trailing Edge Power Drive Unit. Manual Drive | 1 | |
| K27028-1 | Spline Adapter - LE/TE Power Drive Unit, Manual Dr | 1 | |
| KAROT001 | DRIVE UNIT-MINIATURE | 1 | |
| KB132K0140-016 | DRIVE TEST UNIT | 1 | |
| L135M2901101 | PUMP DRIVE HYD.UNIT 220V | 2 | |
| L135M2905101 | HYDRAULIC PUMP DRIVE TOOL (1 UNIT) | 1 | |
| LTQ14 | HYD DRIVE UNIT 13398 FTLB | 1 | |
| LTQ2 | HYD DRIVE UNIT 1687 FTLB | 1 | |
| LTQ30 | HYD DRIVE UNIT 30982 FTLB | 1 | |
| LTQ4 | HYD DRIVE UNIT 3855 FTLB | 1 | |
| LTQ8 | HYD DRIVE UNIT 8149 FTLB | 1 | |
| MC520004-98 | R/I EQUIP, HYD POWER DRIVE UNIT | 1 | |
| MIT65B53300-1 | INSTALLATION/REMOVAL TOOL - GUIDE AND DRIVE UNIT, ELEVATOR GALLEY | 1 | |
| MIT65B81132 | MISCELLANEOUS TOOL - POWER UNIT ASSEMBLY, INBOARD TRAILING EDGE FLAP DRIVE | 1 | |
| MIT65B81133 | MISCELLANEOUS TOOL - POWER UNIT ASSEMBLY, OUTBOARD TRAILING EDGE FLAP DRIVE | 1 | |
| MIT69B62284 | BY-PASS JUMPER PLUG, RETRACTABLE POWER DRIVE UNIT (PDU) CARGO HANDLING | 8 | |
| MR3-MF | DRIVE UNIT-MINIATURE, MINI PROBE 9600-3000RPM) | 2 | |
| P2D-HSC6 | CABLE, MINI DRIVE UNIT, (TECHNANDT OR EQUIVALENT) PROBE - SURFACE, 90 DEGREES, 500 KHZ FREQUENCY, FE/NFE ABSOLUTE, SHIELDED, 0.130 IN. (3.30 MM) DIAMETER, 6.00 IN. (152.4 MM) LONG, 1.00 IN. (25.4 MM) TIP LENGTH, (GE OR EQUIVALENT) | 1 | |
| PA80 | PNEUMATIC DRIVE UNIT | 1 | |
| PWA 86441 | UNIT DRIVE | 1 | |
| PWA105136 | ADAPTER - TORQUE, RADIAL DRIVE UNIT - PW2000 ENGINES | 1 | |
| PWA86441 | UNIT-DRIVE ENGINE TURNING BORESCOPE INSPECTION | 1 | |
| RBEL135M-2901-101 | HYDRAULIC PUMP DRIVE TOOL (1 UNIT) | 2 | |
| RBEL135M-2905-101 | HYDRAULIC PUMP DRIVE TOOL (1 UNIT) | 3 | |
| RBEL135M-2905-101M | HYDRAULIC PUMP DRIVE TOOLS (2 UNITS) | 2 | |
| SJ-210 | STANDARD DRIVE UNIT SURFACE DETECTOR | 8 | |
| SL-210 | STANDARD DRIVE UNIT SURFACE DETECTOR | 1 | |
| SPL-10540 | ADAPTER - TORQUE, RADIAL DRIVE UNIT | 1 | |
| SWE-18991DTT | KIT - ELECTRONIC CONTROL WITH DRIVE UNIT, COMPRESS | 2 | |
| SWE18991DTT | KIT - ELECTRONIC CONTROL WITH DRIVE UNIT, COMPRESSOR TURNING | 2 | |
| SWE189DTT | KIT - ELECTRONIC CONTROL WITH DRIVE UNIT, COMPRESSOR TURNING | 2 | |
| TPDU4C | TEST STAND FOR POWER DRIVE UNITS | 1 | |
| UT1223 | TORQUE,MOTOR DRIVE-VSV CONTROL UNIT | 1 | |
| UT1523 | TORQUE,MOTOR DRIVE-VSV CONTROL UNIT | 7 | |
| UT1524 | TORQUE,MOTOR DRIVE-VSV CONTROL UNIT | 5 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
