| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 2319203420 | DISK HP | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 11C3021G02 | FIXTURE HEAT - HPT ROTOR, STG 1 DISK | 1 | |
| 11C3022 | FIXTURE - INSTALL/REMOVE-DISK - HPT ROTOR - STAGE 2 | 1 | |
| 11C3034 | HEATER - HPTR STAGE 2 DISK (230V/50 HZ) | 1 | |
| 11C3059 | FIXTURE - LIFT & TURN-HPTR STAGE 2 DISK-AFT | 1 | |
| 11C3086 | PULLER - HYDRAULIC-STG 6-10 SPOOL/STG 5 DISK HP COMPR RTR | 1 | |
| 11C3086G01 | PULLER, HYDRAULIC - STAGE 6-10 SPOOL AND STAGE 5 DISK HPC ROTOR | 1 | |
| 11C3087 | FIXTURE - REMOVAL HP COMPR RTR - STG 5 DISK/STG 3-4 SPOOL | 1 | |
| 11C3087G01 | FIXTURE, REMOVAL - HPC ROTOR, STAGE 5 DISK, STAGES 3-4 SPOOL | 1 | |
| 11C3266 | FIXTURE - INSTALLATION HPT AIRDUCT/HPT DISK | 1 | |
| 11C4626 | BLANKET - INSULATION - STG 1 HPTR DISK | 1 | |
| 11C4808 | BLANKET, INSULATION- STG 1 HPTR DISK | 1 | |
| 1498M43P06 | HPT DISK | 1 | |
| 1778M72P03 | HPT STG2 DISK | 1 | |
| 1863M36G02 | HPT STG1 DISK | 1 | |
| 1C8313G01 | PULLER, BLISK STG 0/DISK STG 1 - HP COMP | 1 | |
| 1C9444G01 | FIXTURE, CLAMP - HPT ROTOR DISKS | 1 | |
| 2C14003G01TK | FIXTURE, LIFT&TURN-HPTR STAGE 1 DISK | 1 | |
| 2C14026G03 | PULLER SET, RACES/SEALS HPTR STG.1 DISK | 1 | |
| 2C14058G01 | PUSHER, DIFFUSER-HPTR STAGE 1 DISK | 1 | |
| 2C14252G01 | HPTR ROTOR DISK/SHAFT LAPPING TOOL | 1 | |
| 2C14688 | PULLER SET-STG. 1 HP TURB. DISK, RACES AND SEALS | 1 | |
| 2C14688 REV J | PULLER SET-STG. 1 HP TURB. DISK, RACES AND SEALS | 1 | |
| 2C14688G03/P31-P07 | PULLER SET,-RACES/SEALS HPTR STG.1 DISK | 1 | |
| 2C14688G04 | PULLER SET - STG 1 HPT DISK, RACES AND SEALS | 4 | |
| 2C14688G05 | PULLER SET-STAGE 1 HPT DISK RACES | 2 | |
| 2C14688P05 | PULLER SET - STG 1 HPT DISK, RACES AND SEALS | 1 | |
| 2C14688P08 | PULLER SET - STG 1 HPT DISK, RACES AND SEALS | 1 | |
| 2C14688P27 | PULLER SET - STG 1 HPT DISK, RACES AND SEALS | 1 | |
| 2C14766G01 | FIXTURE, CLAMP HPT RTR DISK | 1 | |
| 2C14824 | FIXTURE,INSTALL REMOVE-THRML SHLD HP TURB ROTOR DISK | 1 | |
| 2C14831G01 | NUT PLATE, SET - STAGE 2 HPT ROTOR DISK (NUT PLATE SET) | 1 | |
| 2C5203P01 | FIXTURE, HPT STAGE 2 DISK SEATING CHECK | 1 | |
| 2C5872G01 | FIXTURE, HPT ROTOR STAGE 1 DISK RUNOUT | 1 | |
| 2C5872G02 | FIXTURE, RUNOUT, STG.1º DISK HPT ROTOR | 1 | |
| 2C6238 | FIXTURE, LIFT-LPT & HPT ROTOR DISKS | 1 | |
| 2C6238G03 | SLING LIFT TURNOVER ‐ HPT ROTOR STAGE 2 DISK | 1 | |
| 2C6238G04 | FIXTURE, LIFT - LPT AND HPT ROTOR DISKS | 2 | |
| 2C8069G01 | FIXTURE, RESTRAINING, HPT 1 & 2 DISK | 1 | |
| 2C81440P01 | RING, SUPPORT - STAGE 2 DISK, HPT | 1 | |
| 2C81448P01 | FIXTURE, SUPPORT, STAGE 1 DISK - HPT | 1 | |
| 2C81454G01 | ADAPTER, HOIST, DISKS HPT ROTOR | 1 | |
| 856A1061 | FIXTURE, LIFT & TURN - HP TURB ROTOR DISK, FWD | 1 | |
| 856A1061 G01 ALT | Fixture Lift & Turn ‐ HPTR Disk Forward | 1 | |
| 856A1061 G03 ALT | Fixture Lift & Turn ‐ HPTR Disk Forward | 1 | |
| 856A1061G01 | FIXTURE, LIFT & TURN - HP TURB ROTOR DISK, FWD | 1 | |
| 856A1061G02 | FIXTURE, LIFT & TURN - HP TURB ROTOR DISK, FWD | 1 | |
| 856A1061G03 | FIXTURE, LIFT & TURN - HP TURB ROTOR DISK, FWD | 7 | |
| 856A1061G04 | FIXTURE, LIFT & TURN - HP TURB ROTOR DISK, FWD | 1 | |
| 856A1070 G02 | FIXTURE, LIFT AND TURN - HPTR DISK, FORWARD | 7 | |
| 856A1075 | FIXTURE, LIFT & TURN - HP TURB ROTOR, DISK AFT | 1 | |
| 856A1075 G02 | Fixture Lift and Turn HPT Rotor Disk Aft | 4 | |
| 856A1075G01 | FIXTURE, LIFT & TURN - HP TURB ROTOR, DISK AFT | 1 | |
| 856A1075G02 | FIXTURE, LIFT & TURN - HP TURB ROTOR, DISK AFT | 4 | |
| 856A1075G03 | FIXTURE, LIFT & TURN - HP TURB ROTOR, DISK AFT | 6 | |
| 856A1076 | PIN SET, GUIDE - HPT SEAL TO HPT DISK | 1 | |
| 856A1076G01 | FIXTURE, CHILLING - HPTR DISK FLANGES | 6 | |
| 856A1076G02 | PIN SET, GUIDE - HPT SEAL TO HPT DISK | 1 | |
| 856A1077G02 | PIN SET, GUIDE - HPT SEAL TO HPT DISK | 7 | |
| 856A1213 | PIN SET, HPTR DISK TO | 1 | |
| 856A1213G01 | Pin Set, Alignment - HPT Rotor Disk to Shaft | 10 | |
| 856A1397G01 | CLAMP SET - HPT FWD SEAL & DISK | 3 | |
| 856A1417 | FIXTURE, LIFT & TURN - HP TURB ROTOR DISK, FWD | 1 | |
| 856A1417G01 | FIXTURE, LIFT & TURN - HP TURBINE ROTOR DISK FORWARD | 1 | |
| 856A1417G02 | FIXTURE, LIFT & TURN - HP TURBINE ROTOR DISK FORWARD | 1 | |
| 856A1417G03 | FIXTURE, LIFT & TURN - HP TURBINE ROTOR DISK FORWARD | 1 | |
| 856A1417G04 | FIXTURE, LIFT AND TURN - HP TURBINE ROTOR DISK FORWARD (LIFT AND TURN FIXTURE) | 7 | |
| 856A1417G04 | FIXTURE, LIFT & TURN - HP TURBINE ROTOR DISK FORWARD | 7 | |
| 856A1602G01 | FIXTURE, CHILL - HPT ROTOR BLADE AFT BLADE RETAINER (CHILL FIXTURE) THE CHILL FIXTURE IS USED TO HOLD DRY ICE AGAINST THE AFT HPT ROTOR DISK BLADE RETAINER, DURING DISASSEMBLY, TO RELEASE THE INTERFERENCE FIT BETWEEN THE RETAINER AND THE HPT DISK | 6 | |
| 856A1897 | FIXTURE-LIFT AND TURN-HP TURB ROTOR-DISK AFT | 1 | |
| 856A1897G01 | FIXTURE, LIFT-TURN HPTR DISK AFT | 2 | |
| 856AI06I | FIXTURE, LIFT & TURN - HP TURB ROTOR DISK, FWD | 1 | |
| 8C2095 | FIXTURE - LIFT HPTR STG 2 DISK | 1 | |
| 8C2139 | FIXTURE, LIFT / TURN - HPCR DISK STAGE 2, 5, 8 | 1 | |
| 901065 | FIXTURE, LIFT-STG 2 HP TURB DISK, AFT | 1 | |
| 956A1044 | GUIDE - INSTALLATION - STAGE 2 DISK - HPTR | 1 | |
| 956A3008 | FIXTURE - LIFT & TURN HPTR STG 2 DISK - AFT | 1 | |
| 956A3010 | FIXTURE - INSTALL/REMOVE - DISK - HPTR - STG 2 | 1 | |
| 956A3010G03 | Fixture,remove-disk hpt rotor,stg 2 | 1 | |
| 956A3011 | HEATER - HPT ROTOR DISK - STG 2 | 1 | |
| 956A3027 | FIXTURE - CHILL - STAGE 1 HPT DISK/FWD FLANGE | 1 | |
| 956A3044 | GUIDE - INSTALLATION - STAGE 2 DISK - HPTR | 1 | |
| 9C1161 | HEATER - HP TURBINE ROTOR DISK | 1 | |
| 9C1499 | FIXTURE, INSTALLATION HPT AIR DUCT/HPT ROTOR DISK | 1 | |
| 9C1577G01 | HIGH SPEED ECI KIT - HPCR STG 7 DISK | 1 | |
| 9C1751G03 | DOVETAIL SLOT ECI KIT - HPCR DISK STG 1 | 1 | |
| 9C2152 | HYDRAULIC PULLER HPC SPOOL STG 2-5 DISK STG 6 | 1 | |
| 9C2152G02 | HYDRAULIC PULLER - HPC SPOOL STG 2/5 & DISK STG 6 | 1 | |
| 9C2153 | HYDRAULIC PULLER HPC DISK STG 6 SPOOL STG 7 - 9 | 1 | |
| 9C2159 | HANDLING PLATE HPC ROTOR SPOOL STAGES 7-9 DISK 6 ASSEMBLY | 1 | |
| 9C3008 | FIXTURE, EXTENSION-DISK, HP TURBINE STAGE 1 | 1 | |
| 9C3142 | ASSEMBLY, HEATER- DISK STAGE 1 HPT | 1 | |
| DT&E 2171 | 2ND STG HPT DISK LIFT FIXTURE | 1 | |
| GE-FQAP-524 | CF6-80A/80C STG 1 HPT DISK DOVETAIL SLOT BOTTOM AFT CORNER CHAMFER EDDY CURRENT INSPECTION | 1 | |
| LTCT11503TK | HPT STG.1 DISK&WAT.FLOW | 1 | |
| PWA12632 | NUT - HPC DISK INSTALL_[PWA12632] | 2 | |
| PWA25555 | PLATE - HPC DISK CLAMPING_[PWA25555] | 1 | |
| PWA25594 | PULLER - HPC, ROTOR ASSY DISK AIRSEAL_[PWA25594] | 2 | |
| PWA25594B | PULLER-HPC, ROTOR ASSY DISK AI_[PWA25594B] | 1 | |
| PWA26479 | SLING,LIFTING - HPC ROTOR DISK & BLADE_[PWA26479] | 1 | |
| PWA27000 | PRESS - HPC DISK_[PWA27000] | 1 | |
| PWA27746 | PULLER - HPT 1,2ND DISK LENTICUL A/SEAL_[PWA27746] | 2 | |
| PWA28242 | GAGE - DISK, HPC 6TH STG Z-PLANE DIA._[PWA28242] | 1 | |
| PWA28243 | GAGE - DISKS,HPC 7TH~15TH STG Z-PL DIA._[PWA28243] | 1 | |
| PWA47108 | HP DISK PULLER | 1 | |
| PWC30304-09 | SET, HP TURBINE DISKPOST-SB7306 BELLCRANK AND NO.4 BEARING HOUSING COVER BOLT RIVETS | 2 | |
| PWC30304-10 | SET, HP TURBINE DISK BALANCING RIVETS | 3 | |
| PWC31237 | LOCKING TOOL, HPT DISK CUPWASHER | 1 | |
| PWC31634 | PULLER, HPT DISK (HYDRAULIC SET) | 3 | |
| PWC31650 | RING, HP TURBINE DISK | 1 | |
| PWC31687 | RIVETER, HPT DISK | 1 | |
| PWC31737 | LOCKING TOOL, HP TURBINE DISK CUPWASHER | 1 | |
| PWC34910-804 | WASH NOZZLE/HP DISK | 17 | |
| PWC37532 | RIVETER, HP AND LP DISK | 4 | |
| PWC37853 | Puller HP Disk | 8 | |
| PWC38358 | Guide tube HP disk | 1 | |
| PWC38450 | PULLER HP DISK | 2 | |
| PWC38456 | PULLER HP DISK | 1 | |
| PWC52576 | COLLAR, HPT DISK (USE WITH PWC41050) | 1 | |
| PWC54267 | ADAPTER, HPT DISK/STUBSHAFT BALANCING | 1 | |
| PWC54318 | Extractor, HP Turbine Disk Adjusting Spacer | 4 | |
| PWC56260 | ADAPTER, HPT DISK/STUBSHAFT, BALANCING | 1 | |
| PWC56502 | Wash Nozzle/HP Disk | 4 | |
| PWC69195 | ROD, HPT DISK | 2 | |
| T72340273 | TORQUE HPC DISK 1 - 2 | 1 | |
| T72340284 | HPC ROTOR DISK 1 EXTRACTOR | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
