| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 69227-2 | DIE MIN | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 120CU20P5 | GROUND POWER UNIT - ELECTRICAL - 115 V, 120 KVA, 400 HZ - TRAILER MOUNTED - CUMMINS DIESEL | 1 | |
| 120CU24P5 | GROUND POWER UNIT - ELECTRICAL - 115 V, 120 KVA, 400 HZ - TRAILER MOUNTED - CUMMINS DIESEL | 1 | |
| 12615 | MINI DIE GRINDER 90 DEGREE | 1 | |
| 12616 | MINI DIE GRINDER | 1 | |
| 1490406-1 | DIE ASSEMBLY;TERMINYL #2 | 1 | |
| 1490597-1 | DIE ASSEMBLY;TERMINL #8 | 1 | |
| 1490598-1 | DIE ASSEMBLY;TERMINYL #6 | 2 | |
| 1490599-1 | DIE ASSEMBLY;TERMINYL #4 | 1 | |
| 1490700-1 | DIE ASSEMBLY;TERMINYL 1/0 | 2 | |
| 1901006-1 | ASSEMBLY; TERMINYL DIE #8 | 1 | |
| 1901007-1 | ASSEMBLY; TERMINYL DIE #6 | 1 | |
| 2001 TOUGH | ALUMINIUM DIE GRINDER (DREMMEL) | 1 | |
| 20553 | METAL FORMING TOOL KIT, INCLUDES VARIOUS DIES FOR SHAPING METAL SHEETS. | 1 | |
| 220196-1 | DIE SET MINI UHF | 1 | |
| 314270-1 | DIE FOR CRIMP TOOL 189721-1 TERMINAL LUG | 1 | |
| 45433 | die terminal 45433 (BM 526388803-1) | 5 | |
| 47820 | DIE TERMINYL 69051 #8 | 14 | |
| 47821 | DIE TERMINYL 69051 #6 | 7 | |
| 47822 | DIE TERMINYL 69051 #4 | 7 | |
| 47823 | DIE TERMINYL 69051 #2 | 7 | |
| 47824 | DIE TERMINYL 69066 1/0 | 3 | |
| 47825 | DIE TERMINYL 69066 2/0 | 2 | |
| 47915 | DIE TERMINYL 69066 3/0 | 1 | |
| 47918 | DIE TERMINYL 69066 4/0 | 1 | |
| 539773-2 | DIE FUER MINI MIC | 1 | |
| 576711 | TERMINAL CRIMPING DIE | 6 | |
| 576714 | TERMINAL CRIMPING DIE | 4 | |
| 576715 | TERMINAL CRIMPING DIE | 2 | |
| 576716 | TERMINAL CRIMPING DIE | 4 | |
| 576723 | TERMINAL CRIMPING DIE | 5 | |
| 576742 | TERMINAL CRIMPING DIE | 4 | |
| 58158-1 | DIE ASSY MINI UHF RG58 | 1 | |
| 58159-1 | DIE ASSY MINI UHF RG188 | 1 | |
| 58707-2 | PROCRIMP MINI-U-MNL2 DIE | 1 | |
| 59975-1 | TE Connectivity 59975-1 Crimping Dies for Solistrand Terminals & Splices | 10 | |
| 63855-7000 | T2 Terminator Die | 1 | |
| 69690 | DIE SUB MIN | 1 | |
| 69690-2 | DIE SUB MIN | 1 | |
| 90758-1 | PROCRIMP TL W/DIE MIN UNIV MNL | 1 | |
| 90758-2 | PROCRIMP DIE MINI UNIV MNL | 1 | |
| 90759-1 | PROCRIMP TL W/DIE MIN UNIV MNL | 4 | |
| 90759-2 | PROCRIMP DIE MINI UNIV MNL | 1 | |
| 90760-1 | PROCRIMP TL W/DIE MIN UNIV MNL | 1 | |
| 90760-2 | PROCRIMP DIE MINI UNIV MNL | 1 | |
| 90C400SLN | UNIT - ELECTRICAL GROUND POWER (90 KVA) SOLID STATE CONTROL DIESEL LOW NOISE - CUMMINS DIESEL ENGINE | 1 | |
| 90CU24P5 | GROUND POWER UNIT - ELECTRICAL - 90 KVA 115 VAC, 400 HZ - CUMMINS 6 CYLINDER DIESEL DRIVEN - TRAILER MOUNTED. | 1 | |
| 91912-3 | PREM SDE DIE;MINI COAXICON | 1 | |
| 91912-5 | PREM SDE DIE;MINI COAXICON | 1 | |
| ACU-302 | AIR CONDITIONER & HEATER - 24 TON COOLING CAPACITY - 234,000 BTU/HR HEATING CAPACITY - R134 A REFRIG POWERED BY CUMMINS DIESEL. OPTIONAL POWER X-FER SWITCH AVAIL. TO ALLOW OPERATION FROM FACILITY POWER. | 1 | |
| AFNDT-3022 | BOMBARDIER SURFACE REFERENECE STANDARD. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), MATERIAL 7075-T6 ALUMINUM. SIZE: 1.5"W x 3.75"L x .25". Includes Test Report and Certificate of Conformance. ( Similar to Specification BD-700 PT 6 ... | 1 | |
| AFNDT-3023 | BOMBARDIER SURFACE REFERENECE STANDARD. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), MATERIAL 7050-T74 ALUMINUM. SIZE: 1.5"W x 3.75"L x .25". Includes Test Report and Certificate of Conformance. ( Similar to Specification BD-700 PT 6... | 1 | |
| AFNDT-3160AL | BOMBARDIER EDDY CURRENT SURFACE REFERENECE STANDARD. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), DEPTH TOLERANCE = +/- .001"(+/- .003mm). MATERIAL 2024-T3 ALUMINUM. SIZE: 1.5"W x 3.75"L x .25". Includes Test Report and Certificate of... | 1 | |
| AFNDT-3160AL-1 | BOMBARDIER EDDY CURRENT SURFACE REFERENECE STANDARD. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), DEPTH TOLERANCE = +/- .001"(+/- .003mm). MATERIAL 6061-T6 ALUMINUM, IACS 40.00-44.80. SIZE: 1.5"W x 3.75"L x .25". Includes Test Report and | 1 | |
| AFNDT-3160AL-2 | BOMBARDIER EDDY CURRENT SURFACE REFERENECE STANDARD. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), DEPTH TOLERANCE = +/- .001"(+/- .003mm). MATERIAL 2024-T6 ALUMINUM, SIZE: 1.5"W x 3.75"L x .25". Includes Test Report and Certificate of ... | 1 | |
| AFNDT-3177AL | BOMBARDIER 10 STEP ALUMINUM WEDGE, PT 4 FIG. 2 PAGE 8. STEP THICKNESSES:, .024", .028", .031", .035", .039", .044", .048", .052", .056" .059" X.XXX +/-0.002, X.XX +/-0.010". PAD SIZE: 1.0" x 1.0", Material: 2024-T3 Aluminum. Chromic anodize and 1 coat | 1 | |
| AFNDT-3291AL | BOMBARDIER 15 HOLE METRIC REFERENCE STANDARD. CL-215T PART 6 PAGE 8 FIGURE 5 GENERAL. MATERIAL: 7075-T6 ALUMINUM. HOLE SIZES: 4MM, 5MM, 6MM, 7MM, 8MM, 9MM, 10MM, 11MM, 12MM, 13MM, 14MM, 15MM, 16MM, 17MM, 18MM diameters. Includes 15 Thru EDM Notches 0.040 | 1 | |
| AL 29-32 | BOMBARDIER GLOBAL 5000 REFERENECE STANDARD BD-700 PT 6 57-20-001. Also in 53-30-19 PART 6 PAGE 6 FIGURE 2. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), MATERIAL 2024-T3 ALUMINUM. SIZE: 1.5"W x 3.75"L x .25" | 6 | |
| AL 35-45 | BOMBARDIER GLOBAL 5000 REFERENECE STANDARD BD-700 PT 6 57-70-001. ALSO IN 53-10-01 PART 6 PAGE 5 FIGURE 1. EDM Notches: .008", .020", .040" ( .005" Wide +0.00, - .002" and +/- .001" Depth), MATERIAL: 2124-T8 or 7075-T7 ALUMINUM. SIZE: 1.5"W x 3.75"L... | 8 | |
| AL35-45 | BOMBARDIER SURFACE REFERENCE STANDARD - 7075-T7ALUMINUM. FULL WIDTH EDM NOTCHES .008", .020", .040" (.005"W +/- .002, MAX.006) BLOCK SIZE: 3.75"L x 1.50"W x 0.25"H | 8 | |
| AST4830 | TIMINGKIT FORD DIESEL MOTOREN | 1 | |
| AT 130 | Mini Die Grinder | 1 | |
| AT109 | DIE GRINDER, AIR, MINI, 90° ANGLE, 1/4" COLLET (20,000 RPM) | 2 | |
| AT116 | MINI ANGLE AIR DIE GRINDER | 1 | |
| AT118 | COMFORT GRIP MINI ANLE DIE GR | 1 | |
| AT120L | 1/4IN MINI EXT DIE GRINDER | 1 | |
| ATS510 | ATS MINI DIE GRINDER STRIG | 1 | |
| ATS5101 | MINI DIE GRINDERS | 1 | |
| ATS5105 | MINI DIE GRINDER, 90 DEG. ANGLE | 4 | |
| ATS5107 | MINI DIE GRINDERS | 1 | |
| ATS5K | ATS MINI DIE GRINDER STRIG | 1 | |
| BH7475-T7351 | CALIBRATION STANDARD, BOMBARDIER CHALLENGER 604, 53-21-00 FIG 602. MATERIAL: 7475-T7 ALUMINUM. Includes Test Report and Certificate of Conformance. | 4 | |
| BP922A | MINI ANGLE DIE GRINDER BAHCO | 1 | |
| CE1617528 | CALIBRATION STANDARD, BOMBARDIER TEST REFERENCE ULTRA SONIC NDI. MATERIAL: 7475-T7351 and 7040-T7451 ALUMINUM. MS90254U0805D FASTENERS. Includes Test Report and Certificate of Conformance. | 1 | |
| CE1617529 | CALIBRATION STANDARD, BOMBARDIER TEST REFERENCE ULTRA SONIC NDI. MATERIAL: 7475-T7351 and 7040-T7451 ALUMINUM. MS90254U0805D FASTENERS. Includes Test Report and Certificate of Conformance. | 1 | |
| CPNCP875 | MINI ANGLE DIE GRINDER | 1 | |
| CPT-875 | MINIANGLEDIEGRINDER | 1 | |
| CUMDS24V | CUMMINS DIESL SET FOR 24 VALV4 | 1 | |
| DANY671 | DIESET TERMINAL 14-16AWG | 1 | |
| DANY672 | DIESET TERMINAL 22-18AWG | 1 | |
| DIE GRINDER | MINI DIE GRINDER | 1 | |
| DNL HX4-501 | CRIMPING TOOL TERMINAL HAND W/Y5-01 DIE | 1 | |
| EEDF503 | CUMMINS DIESEL TEST KIT | 1 | |
| EMC-102D | Die Set, RBY- .082"/ .096"/ .132" Confined Crescent for Insulated Terminals - Use with EMC3300 | 2 | |
| EMC-102DL | Die Set with Locator for R/B/Y Insulated Terminals | 2 | |
| EMC-197D | Die Set - .040 & .085 Confined Crescent for Insulated R, B, Y Terminals & Form Crimp Cavities .151 & .117 - Use with EMC3300 | 1 | |
| EMC-199D | Die Set- 22-10 AWG Un-Insulated Terminals | 2 | |
| EPIKURE 3223 | 1 QUART-DIETHYLENETRIAMINE | 1 | |
| ET-55C-2 | BOMBARDIER / CHALLENGER 604 10 STEP ALUMINUM WEDGE, ET-53-30-012 PT 6 FIG. 2 . STEP THICKNESSES:, .024", .028", .031", .035", .039", .044", .048", .052", .056" .059" +/-0.002, . PAD SIZE: 1.0" x 1.0" +/-0.010", Material: 2024-T3 ALUMINUM. Chromic ano | 1 | |
| ET-55C-3 | BOMBARDIER / CHALLENGER 604 10 STEP ALUMINUM WEDGE, ET-53-30-012 PT 6 FIG. 2 . STEP THICKNESSES:, .024", .028", .031", .035", .039", .044", .048", .052", .056" .059" +/-0.002, . PAD SIZE: 1.0" x 1.0" +/-0.010", Material: 2124-T8 or 7075-T7 ALUMINUM. | 1 | |
| EX604-60024 | CALIBRATION REFERENCE STANDARD MULTI-LAYERED ALUMINUM ALLOY FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 2 | |
| EX604−60024 | Calibration reference standard multi−layered aluminum alloy fastened assembly that contains electrical discharge machined notches (Bombardier Inc.) | 2 | |
| EXBC670-59045 | CALIBRATION REFERENCE STANDARD ASSEMBLY ALUMINUM ALLOY CONTAINS 0.250 IN. (6.35 MM) LONG ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59046 | CALIBRATION REFERENCE STANDARD ASSEMBLY ALUMINUM ALLOY CONTAINS 0.250 IN. (6.35 MM) LONG ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59133 | CALIBRATION REFERENCE STANDARD MADE FROM ALUMINUM ALLOY CONTAINING ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59142 | CALIBRATION REFERENCE STANDARD MADE FROM ALUMINUM ALLOY CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59145 | CALIBRATION REFERENCE STANDARD ALUMINUM ALLOY MULTIPLE LAYERS FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59156 | CALIBRATION REFERENCE STANDARD MADE FROM MULTIPLE ALUMINUM ALLOY CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59177 | CALIBRATION REFERENCE STANDARD ALUMINUM MULTIPLE LAYER FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59180 | CALIBRATION REFERENCE STANDARD ALUMINUM ALLOY MULTIPLE LAYERS FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59181 | CALIBRATION REFERENCE STANDARD ALUMINUM MULTIPLE LAYER FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES. (BOMBARDIER INC.) | 1 | |
| EXBC670−59044 | Calibration reference standard aluminum multiple layer fastened assembly containing electrical discharge machined (EDM) notches. (Bombardier Inc.) | 1 | |
| EXBC670−59045 | Calibration reference standard assembly aluminum alloy contains 0.250 in. (6.35 mm) long electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59046 | Calibration reference standard assembly aluminum alloy contains 0.250 in. (6.35 mm) long electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59065 | Calibration reference standard assembly aluminum and steel alloy contains 0.250 in. (6.35 mm) long electrical discharge machined notches (Bombardier inc.) | 1 | |
| EXBC670−59133 | Calibration reference standard made from aluminum alloy containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59134 | Calibration reference standard aluminum alloy that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59139−001 | Calibration reference standard made from aluminum alloy that contains electrical discharge machined notches (Bombardier inc.) | 1 | |
| EXBC670−59142 | Calibration Reference Standard made from aluminum alloy containing electrical discharge machined (EDM) notches (Bombardier Inc.) | 1 | |
| EXBC670−59145 | Calibration reference standard aluminum alloy multiple layers fastened assembly containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59153 | Calibration reference standard aluminum multiple layer fastened assembly containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59156 | Calibration Reference Standard made from multiple aluminum alloy containing electrical discharge machined (EDM) notches (Bombardier Inc.) | 1 | |
| EXBC670−59162 | Calibration Reference Standard aluminum alloy that contains electrical discharge machined notch. (Bombardier Inc. or equivalent) | 1 | |
| EXBC670−59177 | Calibration reference standard aluminum multiple layer fastened assembly containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59180 | Calibration reference standard aluminum alloy multiple layers fastened assembly containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59181 | Calibration reference standard aluminum multiple layer fastened assembly containing electrical discharge machined (EDM) notches. (Bombardier Inc.) | 1 | |
| HD002-01 | Die Set Assembly - Confined Crescent for 1/0 AWG Copper Insulated Terminals | 2 | |
| HD002-02 | Die Set Assembly - Confined Crescent for 2/0 AWG Copper Insulated Terminals | 2 | |
| HD002-03 | Die Set Assembly - Confined Crescent for 3/0 AWG Copper Insulated Terminals | 2 | |
| HD002-04 | Die Set Assembly - Confined Crescent for 4/0 AWG Copper Insulated Terminals | 2 | |
| HD002-1 | Die Set Assembly - Confined Crescent for 1 AWG Copper Insulated Terminals | 3 | |
| HD002-2 | Die Set Assembly - Confined Crescent for 2 AWG Copper Insulated Terminals | 2 | |
| HD002-4 | Die Set Assembly - Confined Crescent for 4 AWG Copper Insulated Terminals | 2 | |
| HD002-6 | Die Set Assembly - Confined Crescent for 6 AWG Copper Insulated Terminals | 2 | |
| HD002-8 | Die Set Assembly - Confined Crescent for 8 AWG Copper Insulated Terminals | 2 | |
| HD12-103 | Die Set Assembly - W Crimp for 3/0 AWG Uninsulated Terminals - Use with TBHD1M | 2 | |
| HD36-111N | Die Set - Single Indent 0.135" for 8 AWG Uninsulated Terminals | 2 | |
| HD36-112N | Die Set - Single Indent Hex 0.126" for 6 AWG Uninsulated Terminals | 2 | |
| HD36-113N | Die Set - Single Indent Hex 0.206" for 4 AWG Uninsulated Terminals | 2 | |
| HD36-114N | Die Set - Single Indent Hex 0.265" for 2 AWG Uninsulated Terminals | 2 | |
| HD36-136 | Die Set - 6 AWG Terminal - Tyco 1490598-1 | 2 | |
| HD36-137 | Die Set - 4 AWG Terminal -Tyco 1490599-1 | 2 | |
| HD36-139 | DIE SET - 8 AWG TERMINYL (TYCO 1490597-1 | 3 | |
| HD442-01A | Crimp Die, Aluminum - MS25442-01A | 2 | |
| HD442-02A | Crimp Die, Aluminum - MS25442-02A | 2 | |
| HD442-03A | Crimp Die, Aluminum - MS25442-03A | 2 | |
| HD442-04A | Crimp Die, Aluminum - MS25442-04A | 2 | |
| HD442-1A | Crimp Die, Aluminum - MS25442-1A | 2 | |
| HD442-2A | Crimp Die, Aluminum - MS25442-2A | 2 | |
| HD442-4A | Crimp Die, Aluminum - MS25442-4A | 2 | |
| HD442-6A | Crimp Die, Aluminum - MS25442-6A | 2 | |
| HD442-8A | Crimp Die, Aluminum - MS25442-8A | 2 | |
| HD485-01 | Die Set Assembly - Hex Cavity for 1/0 AWG Uninsulated Copper Terminals | 2 | |
| HD485-02 | Die Set Assembly - Hex Cavity for 2/0 AWG Uninsulated Copper Terminals | 2 | |
| HD485-03 | Die Set Assembly - Hex Cavity for 3/0 AWG Uninsulated Copper Terminals | 2 | |
| HD485-04 | Die Set Assembly - Hex Cavity for 4/0 AWG Uninsulated Copper Terminals | 2 | |
| HD485-1 | Die Set Assembly - Hex Cavity for 1 AWG Uninsulated Copper Terminals | 2 | |
| HD485-2 | Die Set Assembly - Hex Cavity for 2 AWG Uninsulated Copper Terminals | 2 | |
| HD485-4 | Die Set Assembly - Hex Cavity for 4 AWG Uninsulated Copper Terminals | 2 | |
| HD485-6 | Die Set Assembly - Hex Cavity for 6 AWG Uninsulated Copper Terminals | 2 | |
| HD485-8 | Die Set Assembly - Hex Cavity for 8 AWG Uninsulated Copper Terminals | 2 | |
| HD51-105 | DIE SET #8 AWG INSULATED TERMINALS | 3 | |
| HD51-106 | DIE SET #6 AWG INSULATED TERMINALS | 3 | |
| HD51-107 | DIE SET #4 AWG INSULATED TERMINALS | 4 | |
| HD51-113 | DIE SET - #2 AWG INSULATED TERMINALS | 3 | |
| HD51-114N | Die Set - Single Indent #8 Uninsulated Terminals | 2 | |
| HD51-115N | Die Set - Single Indent #6 Uninsulated Terminals | 2 | |
| HD51-116N | Die Set - Single Indent #4 Uninsulated Terminals | 3 | |
| HD51-117N | Die Set - Single Indent #2 Uninsulated Terminals | 3 | |
| HD51-118N | Die Set - Double Indent #8 Uninsulated Terminals | 3 | |
| HD51-119 | Die Set - Single Indent #8 Uninsulated Terminals | 1 | |
| HD51-119N | Die Set - Double Indent #6 Uninsulated Terminals | 2 | |
| HD51-120N | Die Set - Double Indent #4 Uninsulated Terminals | 2 | |
| HD51-121N | Die Set - Double Indent #2 Uninsulated Terminals | 2 | |
| HD51-122N | Die Set - Single Indent #1/0 Uninsulated Terminals | 3 | |
| HD51-123N | Die Set - Double Indent #1/0 Uninsulated Terminals | 2 | |
| HD51-124N | Die Set - Double Indent #2/0 Uninsulated Terminals | 3 | |
| HD51-125N | Die Set - Single Indent #2/0 Uninsulated Terminals | 2 | |
| HD51-128 | CCMMERCIAL DIE (1/0 INSULTERMINALS) | 2 | |
| HD51-130-1 | Die Half - Male #2 - #8 Uninsulated Terminals | 2 | |
| HD51-131-2 | Die Half - Female #2 & #8 Uninsulated Terminals | 2 | |
| HD51-132-2 | Die Half - Female #4 & #6 Uninsulated Terminals | 2 | |
| HD51-133-2 | Die Half - Female #2 & #8 Insulated Terminals | 2 | |
| HD51-134-2 | Die Half - Female #4 & #6 Insulated Terminals | 2 | |
| HD51-138 | Die Set - #2 Uninsulated Terminals | 2 | |
| HD51-159 | Die Set - #2 AWG Insulated Terminals | 2 | |
| HD51-163 | Die Set - #8 Hex Uninsulated Terminals | 1 | |
| HD51-164 | Die Set - #6 Hex Uninsulated Terminals | 1 | |
| HD51-165 | Die Set - #4 Hex Uninsulated Terminals | 1 | |
| HD51-165P | DIE SET - #4 HEX UNINSULATED TERMINALS | 1 | |
| HD51-166 | Die Set - #1 Hex Uninsulated Terminals | 1 | |
| HD51-167 | Die Set - #1/0 Hex Uninsulated Terminals | 1 | |
| HD51-168 | Die Set - #2/0 Hex Uninsulated Terminals | 2 | |
| HD51-184 | Die Set - #8 AWG Insulated Terminals | 2 | |
| HD51-192 | Die Set - #8 Hex Uninsulated Terminals | 1 | |
| HD51-193 | Die Set - #6 Hex Uninsulated Terminals | 1 | |
| HD51-194 | Die Set - #4 Hex Uninsulated Terminals | 1 | |
| HD51-196 | Die Set - #1 Hex Uninsulated Terminals | 1 | |
| HD51-197 | Die Set - #1/0 Hex Uninsulated Terminals | 1 | |
| HD51-198 | Die Set - #2/0 Hex Uninsulated Terminals | 1 | |
| HD51-199 | Die Set #8 AWG Insulated Terminals | 1 | |
| HD51-200 | Die Set - Single Indent #6 Uninsulated Terminals | 1 | |
| HD51-201 | Die Set - Single Indent #4 Uninsulated Terminals | 1 | |
| HD51-202 | Die Set - Single Indent #2 Uninsulated Terminals | 1 | |
| HD51-203 | Die Set - Single Indent #1/0 Uninsulated Terminals | 1 | |
| HD51-204 | Die Set - Single Indent #2/0 Uninsulated Terminals | 1 | |
| HD51-205 | Die Set #8 AWG Insulated Terminals | 1 | |
| HD51-206 | Die Set #6 AWG Insulated Terminals | 1 | |
| HD51-207 | Die Set #4 AWG Insulated Terminals | 2 | |
| HD51-208 | Die Set - #2 AWG Insulated Terminals | 1 | |
| HIP-D-9SS-RAT | A320 HYDRAULIC TEST CART, DIESEL ENGINE OPERATED MINIMUM 40 GPM @ 3,000 PSI | 1 | |
| HX4-501 | CRIMPING TOOL TERMINAL HAND W/Y5-01 DIE | 1 | |
| M22520/10-100 | X DIE SET - .136 CONFINED CRESCENT FOR 12-10 AWG MS3316 INSULATED TERMINALS | 1 | |
| M22520/5-43 | DIE SET,FOR SHIELDED TERMINATION FERRULES AND FO | 4 | |
| ME22902Z00-F7XC571420125 | FORMING DIE FOR BRAKE WASHER'S BELL CRANK CLIP | 1 | |
| MHW40170 | 30IN DIE BAR DOMINATOR | 1 | |
| MODEL 200 | TRACTOR - TOW - 16,000 TO 35,000 LB DRAW BAR PULL - CUMMINS DIESEL POWERED | 1 | |
| PSP 396 | BOMBARDIER CALIBRATION STANDARD, CL-215T PART 6 FIGURE 5 PAGE 8. A TOTAL OF 15 HOLE SIZES: 4mm THRU 18mm MATERIAL: 2024T3 ALUMINUM. Includes Certification Report Traceable to NIST and Certificate of Conformance. | 1 | |
| PT110 | MINI ANGLE DIE GRINDER | 1 | |
| PT110A | MINI ANGLE DIE GRINDER | 2 | |
| PT110M | MINI METRIC DIE GRINDER | 1 | |
| PTGR100 | MINI DIE GRINDER | 1 | |
| PTGR100G | MINI DIE GRINDER GRN | 1 | |
| PTGR100GM | MINI DIE GRINDER GUN METAL | 1 | |
| PTGR100HV | MINI DIE GRINDER HI-VIZ | 1 | |
| PTGR100O | MINI DIE GRINDER ORG | 1 | |
| PTGR105 | MINI EXT.DIE GRINDER | 1 | |
| PTGR105G | MINI EXT.DIE GRINDER GREEN | 1 | |
| PTGR105GM | MINI EXT.DIE GRINDER GUN-METAL | 1 | |
| PTGR105HV | MINI EXT.DIE GRINDER HI-VIZ | 1 | |
| PTGR105O | MINI EXT.DIE GRINDER ORANGE | 1 | |
| PTGR110 | MINI ANGLE DIE GRINDER | 1 | |
| PTGR110G | MINI ANGLE DIE GRINDER GRN | 1 | |
| PTGR110GM | MINI ANGLE DIE GRINDER GN METL | 1 | |
| PTGR110HV | MINI ANGLE DIE GRINDER HI-VIZ | 1 | |
| PTGR110O | MINI ANGLE DIE GRINDER ORG | 1 | |
| PTGR115 | MINI LONG RA DIE GRINGER | 1 | |
| PTGR115BK | MINI LONG RA DIE GRINGER BLK | 1 | |
| PTGR115G | MINI LONG RA DIE GRINGER GRN | 1 | |
| PTGR115GM | MINI LONG RA DIE GRINGER GM | 1 | |
| PTGR115HV | MINI LONG RA DIE GRINGER HVZ | 1 | |
| PWA15594 | TF33/JT3 VANE STAGE 1 - PUNCH AND DIE INSERT (PRELIMINARY) | 1 | |
| PWA15677 | TF33/JT3 VANE STAGE 2 - PUNCH AND DIE INSERT (PRELIMINARY) | 1 | |
| PWA35439 | TF33/JT3 VANE STAGE 4 - PUNCH AND DIE INSERT (PRELIMINARY) | 1 | |
| QUADRAX TERMINATION KIT | QUADRAX TERMINATION ( SMALL DANIELS, K709 POSITIONER, HX4, Y143 DIE, 1738894-1 | 1 | |
| SBR30 | Jet® Shear, Brake & Roll Combo (Capacity range: 20 ga. @ 30" Wide) (Slip roll size: 30" x 1-1/2") (Upper die height*: 4-3/8") (Minimum forming radius: 3/4") (Shipping weight: 320 lbs (145 kgs)) (Add to cart: Add To Cart) | 1 | |
| SBR40 | Jet® Shear, Brake & Roll Combo (Capacity range: 20 ga. @ 30" Wide) (Slip roll size: 30" x 1-1/2") (Upper die height*: 4-3/8") (Minimum forming radius: 3/4") (Shipping weight: 320 lbs (145 kgs)) (Add to cart: Add To Cart) (Capacity range: 20 ga. @ 40" Wide | 1 | |
| SDD244 | FLAT MINI BLK DIE SD | 1 | |
| SMLP-600D | TRACTOR - TOWING - 48,000 LB DRAW BAR PULL - WEIGHT 60,000 LB - CUMMINS DIESEL POWER | 1 | |
| SP500 | DIESEL TIMING SET | 1 | |
| SPDTU1518 | ADAPT DIESL,CUMMINS(C) | 1 | |
| TEK-9017 | R&D Bombardier 10Mhz .187x.110, 70deg aluminum | 1 | |
| U9230-T1 | DIE - CAM FORMING | 1 | |
| X515 | X DIE SET - .136 CONFINED CRESCENT FOR 12-10 AWG MS3316 INSULATED TERMINALS | 3 | |
| XM-20 | Tractor, Eagle Tug - 16,000 D.B.P - 210,000 lb Max Towing (Cummins Diesel Tier 4 Final) | 2 | |
| Y1115 | Die Set- 22-18 AWG Insulated Terminals | 2 | |
| Y1116 | Die Set- 14-16 AWG Insulated Terminals | 2 | |
| Y1117 | Die Set- 10-12 AWG Insulated Terminals | 2 | |
| Y501 | Y Die Set - .136 & .100 Confined Crescent Pre-Insulated Terminal Crimp 26-10 AWG | 10 | |
| Y670 | Die Set - Terminal 12-10 AWG | 4 | |
| Y671 | Die Set - Terminal 14-16 AWG | 4 | |
| Y672 | Die Set - Terminal 22-18 AWG | 4 | |
| Y678 | Die Set - Terminal 24-26 AWG | 3 | |
| Y833H | Die Set - Confined Crescent for 2 AWG Insulated Terminals - Use with HD37 | 2 | |
| Y844HN | Die Set - Single Indent for 8 AWG Uninsulated Terminals - Use with HD37 | 2 | |
| Y845HN | Die Set - Double Indent for 8 AWG Uninsulated Terminal - Use with HD37 | 2 | |
| Y847HN | Die Set - Double Indent for 6 AWG Uninsulated Terminal - Use with HD37 | 2 | |
| Y849HN | Die Set - Double Indent for 4 AWG Uninsulated Terminals - Use with HD37 | 2 | |
| Y850HN | Die Set - Single Indent for 2 AWG Uninsulated Terminals - Use with HD37 | 2 | |
| Y851HN | Die Set - Double Indent for 2 AWG Uninsulated Terminals - Use with HD37 | 2 | |
| Y881 | Die Set for Burndy MS25036-146 Insulated Terminals | 2 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
